| Dual DIN in-dash HDD Mobile Navigation System with 7 Widescreen Color   LCD Monitor/DVD Receiver   Système de navigation embarqué à disque dur de format 2-DIN   avec récepteur DVD/moniteur couleur ACL grand écran de 7 po   Sistema de navegación portátil de doble DIN para tablero de mandos, con   disco duro y monitor LCD panorámico de 7 en color y receptor con DVD   CN-NVD905U   System Upgrade Guidebook   Guide pratique de mise à niveau de système   Guía de mejora del sistema    Read the “Safety information” presented in the Operating Instructions before   using this product.   This manual explains basic operations. Refer to the Operating Instructions for   detailed operation methods.   Avant d’utiliser le présent produit, veuillez lire les « informations sur la sécurité »    décrites dans le manuel d’instructions.   Le présent manuel décrit les opérations de base. Pour obtenir des informations   détaillées sur l’utilisation, consultez le manuel d’instructions.   Lea la “Información de seguridad” que aparece en las Instrucciones de    funcionamiento antes de utilizar este producto.   En este manual se explican operaciones básicas. Consulte los métodos de   funcionamiento detallados en las Instrucciones de funcionamiento.   Contents   This is a guidebook specific to system upgrading.   Please refer to the Operating Instructions for basic   operations, menu operations, specifications, etc.   English   Français   Español   ®  Hands-Free Kit featuring Bluetooth   technology (CY-BT100U)   You can connect the optional hands-free phone   ® system (Hands-Free Kit featuring Bluetooth   technology: CY-BT100U, option). For details, refer to   the operating instructions for the hands-free phone   system.   ...................2   ....................................................................3   .........................4   Before reading these instructions   Contents   SIRIUS Satellite Radio control   XM Satellite Radio control   Traffic information   iPod control   TV tuner control   Rear monitor   ® Bluetooth   The Bluetooth word mark and logo are owned by   the Bluetooth SIG, Inc. and any use of such marks   by Matsushita Electric Industrial Co., Ltd. is under   license. Other trademarks and trade names are   those of their respective owners.   .................................8   ...............................................11   ............................................................12   ....................................................15   .........................................................15   ...............................................16   Rear view camera   Bluetooth hands-free kit   Troubleshooting    Expansion module (hub unit)   ....................................16   ...................................................18   (CY-EM100U)   You can connect the optional expansion module   (hub unit) (CY-EM100U, option). Connection of the   expansion module allows you to simultaneously   connect optional devices mentioned before as well as   other AV devices. For details, refer to the operating   instructions for the expansion module.   Connectable devices    SIRIUS Satellite Radio Tuner (max. 1)   XM Satellite Radio Tuner (max. 1)   iPod (max. 1)   Hands-free phone system (max. 1)       TV tuner (max. 1)   Note:    Market conditions regarding optional devices vary by   country and region. For further information, consult   your dealer.   3 3 SIRIUS Satellite Radio control   What is SIRIUS Satellite Radio?   Switch to SIRIUS Satellite Radio   Over 120 channels of the best entertainment   and completely commercial-free music for   your car, home or office.   Only SIRIUS has more than 65 original music   channels, from today’s hits to R&B oldies to classical   masterpieces. From authentic Country and real Bluegrass   to cool Jazz, hot Latin, Reggae, Rock and many more.   Best of all, it’s all completely commercial-free.   Select [SIRIUS] on the Audiovisual   source operation screen.   ( Operating Instructions)    SIRIUS also has more than 55 channels of world-class   sports, news and entertainment. Included as part of your   subscription, you get up to 16 NFL games a week, up to   40 NBA games a week and up to 40 NHL games a week.   (Games are broadcasted during their respective   seasons.)   Coupled with great sports news from ESPN, the SIRIUS   sports offering is unrivaled. And don’t forget a host of   other great news and entertainment, like NPR, CNBC,   Fox News, Radio Disney and E!Entertainment Radio.   SIRIUS operation screen   Direct channel selection   Indicates SIRIUS Satellite   Radio Tuner is ready.   Displays the SIRIUS   Setup screen   Channel   With SIRIUS, the emphasis is on the music and   entertainment you want. The music is hosted by SIRIUS   Jockeys, who are true experts. They back-up the music   with compelling information about the song being   played, and they understand that sometimes it’s best to   just let the music speak for itself.   Rely on SIRIUS rocket science for superior   coverage.   Preset channels Category selection   List selection   Only SIRIUS has three powerful satellites that fly directly   over the U.S. ensuring coast-to-coast coverage with high   elevation angles. This gives the satellites a “clear line   of sight” to your car or home, with much less concern   for buildings, trees or other objects that might block   conventional satellite signals.   Channel information   Once you experience more than 120 channels of digital   entertainment, you’ll never want to leave your car. For   Preparation:    Connect the optional SIRIUS Satellite Radio Tuner   (SIR-PAN1).   4 4 Getting started   Select a channel   You must sign up to become a SIRIUS Satellite Radio   subscriber. After checking your SIRIUS Satellite Radio   ID, sign up on the SIRIUS’s website or call them.   Press   . Select [Setup] on the SIRIUS   1 operation screen.   When the category setting is on   Channels within the selected category can be   switched.   When the category setting is off   Channels can be switched from among all   channels in all categories.    The SIRIUS Setup screen is displayed.    Category setting ( page 6)   Check SIRIUS Satellite Radio ID.   2 Note:    Press and hold   or   to scan the channels.   Release to stop scanning channels.   Select a channel directly   Select the channel by directly entering the channel   number.    The SIRIUS Satellite Radio ID can also be   displayed by selecting channel 0 on the SIRIUS   operation screen.   (Refer to “Select a channel” on page 5.)   Select [Number].   1 Activate the SIRIUS Satellite Radio.   3 Select either of the following to sign up.    Web site: http://home.sirius.com/webCUWI    Phone number: 1-888-539-SIRIUS (7474)   Enter the channel number and select   2 [Enter].    Switches to the selected channel.   Select [Ret] to delete the entered numbers.    Note:    If the selected channel is in a category that does not   match the current category selection, the category   also switches.   If you have not signed up for the selected channel, no    sound can be heard from the unit.   (“CALL 888-539-SIRIUS” is displayed.)   Channels which can be selected are in the range of 0   to 223 channel.    5 5 SIRIUS Satellite Radio control   (continued)   Select a category   Preset memory   The channel being received can be stored manually   under a selected number.    To turn the category selection on   Select [Setup].   Select the channel, then touch and   hold the number under which you   wish to store the channel for at least   2 seconds.   1  The SIRIUS Setup screen is displayed.   Select [On] from “Category”.   2  The channel being received is stored under the   selected number.   Note:    6 channels can be stored for each channel list (SR1,   SR2, and SR3). (18 channels in total)   Select [Band] to switch between channel lists.    Select [Off] to turn the category selection off.    The channel list switches as shown below each time   [Band] is selected.    To select a category   SR1   SR2   SR3   Select [] or [].    Select a stored channel   Select a channel (number) from the   preset channels.    The category switches.   Note:    It is not possible to select a category if “Category” is   set to [Off].    The channel switches to the selected channel.   6 6 Parental lock   Restricts the channels that can be received.    To set the lock channel   Select [Setup] from “Parental Lock”   1 Set the channels to be protected by Parental lock.   on the SIRIUS Setup screen.   Select [Lock]/[Unlock] for each channel.    When [Lock] is selected, the channel is locked.   Locked channels are skipped at channel   selection. ( page 5)   The passcode entry screen is displayed when a   Enter the 4-digit passcode and select   2  [Enter].   default: 0000    locked channel number is entered at the direct   channel selection. ( page 5)   Enter the passcode to switch to the selected   channel.    When [Unlock] is selected, the channel is unlocked.    : Moves the cursor to the previous/next screen.   : Moves the cursor to the previous/next   item.    The Parental lock setup screen is displayed.   Select [Ret] to delete the entered numbers.   Once a code number is entered, the code     number will be required the next time the item   is used, and thereafter. Do not forget the code   number. If you forget your code number, touch   [Ret] 10 times to initialize the setting.    To change the passcode   Enter the current 4-digit passcode   and select [Enter].   1 2 3 Make settings.   3 Enter the new 4-digit passcode and   select [Enter].   Parental lock    [On]: Enables the parental lock.   [Off]: Disables the parental lock.   To set the lock channel   Select [Set] from “Lock Channel”. ( page 7)   To change the passcode   Select [Set] from “Passcode”. ( page 7)   Enter the new 4-digit passcode again   and select [Enter].   7 7  The passcode is updated to the new entry.   XM Satellite Radio control   XM Satellite Radio   Getting started   You can connect the optional XM Satellite Radio   Tuner (XMD1000) with optional Digital Adapter Cable   (XMDPAN110). For details, refer to the operating   instructions for the XM Satellite Radio Tuner.   You must sign up to become an XM Satellite Radio   subscriber. After checking your XM Satellite Radio ID,   sign up on XM’s website or call them.    Toll free number   Check XM Satellite Radio ID.   1 XM Satellite Radio Tuner P/N: XMD1000   Call 1-800-XM-RADIO (967-2346)   Extension cord P/N: XMDPAN110   Call 1-800-942-TERK (8375)   XMD 1000   L/C 1144XXXXXX   XM RADIO ID : XXXXXXXX   XM Satellite Radio ID   About XM     Write down the ID indicated on the lower right of   your XM Satellite Radio Tuner (XMD1000).   Check the ID shown by tuning your XM radio to   channel 0.   The direct satellite-to-tuner broadcasting technology   is used to provide listeners with crystal-clear sound   smoothly from coast to coast. XM is over 130 channels   of sheer variety: digital-quality music, news, sports,   comedy, traffic & weather, talk, children’s programs, and   more.   Activate XM Satellite Radio. Select   either of the following to sign up.   2 The XM name and related logos are trademarks of XM   Satellite Radio Inc.     Phone number: 1-800-852-9696   Preparation:    Connect the optional XM Satellite Radio Tuner   (XMD1000) with optional Digital Adapter Cable.   8 8 Switch to XM Satellite Radio   Select a channel   Select [XM] on the Audiovisual   Press   . ( Operating   source operation screen.    Instructions)   When the category setting is on   Channels within the selected category can be   switched.    The XM operation screen is displayed.   When the category setting is off   Channels can be switched from among all   channels in all categories.   XM operation screen    Category setting ( page 10)   Direct channel selection   Note:   Press and hold   Release to stop scanning channels.   Indicates XM Satellite   Radio Tuner is ready.   Displays the XM   Setup screen    or   to scan the channels.   Channel   Select a channel directly   Select the channel by directly entering the channel   number.   Select [Number].   1 List selection Preset channels Category selection   Channel information   Enter the channel number and select   2 [Enter].    Switches to the selected channel.   Select [Ret] to delete the entered numbers.    Note:    If the selected channel is in a category that does not   match the current category selection, the category   also switches.   If you have not signed up for the selected channel, no    sound can be heard from the unit.   (“INVALID CHANNEL” is displayed.)   Channels which can be selected are in the range of 0    to 255 channel.   9 9 XM Satellite Radio control   (continued)   Select a category   Preset memory   The channel being received can be stored manually   under a selected number.    To turn the category selection on   Select [Setup].   Select the channel, then touch and   hold the number under which you   wish to store the channel for at least   2 seconds.   1  The XM Setup screen is displayed.   Select [On] from “Category”.   2  The channel being received is stored under the   selected number.   Note:    6 channels can be stored for each channel list (XM1,   XM2, and XM3). (18 channels in total)   Select [Band] to switch between channel lists.    Select [Off] to turn the category selection off.    The channel list switches as shown below each time   [Band] is selected.    To select a category   XM1   XM2   XM3   Select [] or [].    Select a stored channel   Select a channel (number) from the   preset channels.    The category switches.   Note:    It is not possible to select a category if “Category” is   set to [Off].    The channel switches to the selected channel.   10   10   Traffic information   Stores only one traffic channel, either SIRIUS Satellite   Radio or XM Satellite Radio, so it can be called easily   from any Audiovisual source operation screen.   Select the channel, then touch and   hold [Traffic] for 2 seconds or longer.   (Example: SIRIUS operation screen)    The channel being received is stored.    Select a stored channel   Select [Traffic].   (Example: SIRIUS operation screen)   Note:    This function cannot be used if neither SIRIUS   Satellite Radio nor XM Satellite Radio is connected.   Channels which are parental locked cannot be stored.    11   11   iPod control   Preparation:   Connect an iPod with the Direct cable for iPod   Connecting an iPod to the system    (CA-DC300U, option).    To connect the iPod   iPod   Direct cable for iPod   (CA-DC300U, option)   Controllable iPod/   software version    3rd generation iPod/ver. 2.2 – 2.3   4th generation iPod/ver. 3.0.2 – 3.1   5th generation iPod/ver. 1.0     (Video and photos cannot be displayed.)   iPod Photo/ver. 1.0 – 1.2    Dock connector port   (Photos cannot be displayed.)   iPod mini/ver. 1.2 – 1.4   iPod nano/ver. 1.0   * Operation has been confirmed for software available   at the end of February, 2007. We do not guarantee   proper operation with our future products or upgraded   software.     The iPod cannot be operated with its own   controls.   The iPod charges while it is connected to the   main unit.      To disconnect the iPod   Detach while pressing.   Note:    Do not attach or detach the iPod while iPod is on.   Noise is generated which could damage the speakers.   Use a holder or other means to ensure the iPod does    not move while the vehicle is in motion.   Do not leave the iPod for long periods of time where    the inside of the vehicle will get hot.   Also refer to the installation manual for the iPod to be    connected.   Switch to iPod    After turning the engine off (switching from ACC to   OFF), always disconnect the iPod. If the iPod is left   connected, its power may not turn off, causing its   battery to run down.   Select [iPod] on the Audiovisual   source operation screen.   ( Operating Instructions)    Please note that no compensation will be provided for   data lost from the iPod while it is used connected to   the main unit.   The iPod is licensed for duplication and playback    of material that is uncopyrighted, or may legally   be duplicated or played for individual private use.   Infringement of copyright is prohibited by law.    Do not connect iPod accessories such as a remote    The iPod operation screen is displayed.   Plays the track.   control unit or headphones while the iPod is   connected to the main unit. They may not function   normally in some cases.   The iPod can only play music data.   The iPod Shuffle is not compatible.    Note:     “Communication error” appears until the iPod is   recognized after connecting the iPod, turning on the   power of the main unit, or performing source selection   on the main unit. This indicates there is nothing wrong   with the main unit.   We do not guarantee operation of all the functions of   the iPod to be connected.   Only iPods equipped with a dock connector can be   connected.   is displayed even if only the connecting cable   (CA-DC300U, option) is connected to the unit.       12   12   iPod operation screen   Fast forward/Fast reverse      Album name   Track name   Artist name   Displays the Track list   Press and hold   . Playing time    Fast forward or fast reverse continues while the   button is pressed.   Press and hold   Press and hold   Release to return to normal playback.   Touching and holding [] or [] on   the iPod operation screen will also cause fast   forward/fast reverse.   to fast forward.   to fast reverse.     Shuffle play   Repeat play   Fast forward/Fast reverse   Displays the Music menu   Shuffle play    To shuffle tracks   Select track   Select   . Press   . Illuminates   when On.    All tracks are played in random order.   Track shuffle indicator illuminates.      Press   Press   to play from the next track.   to play the currently playing track   Select   again to cancel shuffle play.    from the beginning. Press twice or more to play   the preceding track.    To shuffle albums   Touch and hold   1 second.   for at least   Illuminates   when On.    Albums are played in random order. (Tracks on   albums are not played at random.)   Album shuffle indicator illuminates.     Select   again to cancel shuffle play.   13   13   iPod control   (continued)   Repeat play   Select a track from the list   Select   . Select [Music Menu].   1 Illuminates   when On.     The track being played is played repeatedly.   1 track indicator illuminates.   The iPod Music Menu screen is displayed.     Select   again to cancel repeat play.   Select the list to display.   2 Track list   All tracks to be played are listed.   Select [Track List].    The list screens are displayed.   Select [Play] for the items to play   from the list.   3  Plays the selected items.   Select [Main] to return to the iPod operation    screen.    : Moves the cursor to the previous/next   screen.   : Moves the cursor to the previous/next   item.    The track being played is displayed in bold.   Select a track to play that track.     : Moves the cursor to the previous/next   screen.   : Moves the cursor to the previous/next   item.   When an item is selected, the track list within the   item is displayed.    Select a track to play that track.   Note:    Category registration on the iPod itself is required for   use of lists.   14   14   TV tuner control Rear monitor   Preparation:   Connect a TV tuner (CY-TUN153U, option) to the   Preparation:   Connect a rear monitor to the unit.     unit.    You must install the TV antenna to receive TV   broadcasts.   To receive TV broadcasts, park your car in an   area free from any obstacles that would impede   reception.   Using with a rear monitor   Audiovisual function images from the main unit are    displayed on the rear monitor. When   while the Audiovisual screen displays, the navigation   screen displays on the main unit while the selected   image is output to the rear monitor.   [DVD, AV only]   is pressed   Switch to TV   Select [AV] on the Audiovisual   source operation screen.   Display the Audiovisual screen on the   ( Operating Instructions)    rear monitor   Example: The Audiovisual screen is displayed on the   rear monitor while the navigation screen is   displayed.   [Rear monitor]    The selected source is displayed.   Switch the rear monitor to the input mode that   is connected to the main unit. (video input, etc.)    TV (AV) operation screen is displayed.     When [PICTURE] is selected, the image is   displayed.    Refer to the Operating Instructions for operation   of [Sound] and [ASPECT].   AV menu   Touch the screen while video is displayed to display the   AV menu.   [Main unit]    The navigation screen is displayed.    Refer to the Operating Instructions for [Display]   operations.   Select [Hide Buttons] to close the AV menu.    Note:    For TV operation, use the remote control unit provided   with the TV tuner (CY-TUN153U, option), pointing it   towards the remote control signal sensor of the main   unit.   Refer to the TV tuner instruction manual for details of   its operation.    15   15   Rear view camera Bluetooth hands-free kit   Preparation:   Preparation:   Connect the Bluetooth hands-free kit (CY-BT100U,   option) and establish the pairing. Refer to the   instruction manual for the Bluetooth hands-free kit   for further information.     Connect a rear view camera to the unit.   Set “Rear View Camera” to [On] on the Install.    Setting screen. ( Operating Instructions)   Switch to the rear view camera screen   Move the vehicle shift lever to reverse.   Connection of the optional Bluetooth hands-free kit allows   users to talk on a handsfree cellular phone in the car.   Note:    The Bluetooth word mark and logo are owned by   the Bluetooth SIG, Inc. and any use of such marks   by Matsushita Electric Industrial Co., Ltd. is under   license. Other trademarks and trade name are those of   their respective owners.    The rear view camera image is displayed.    Press   , or   to cancel the rear   view camera display.   Switch to Bluetooth hands-free   This mode is not selectable by pressing   or    To display manually   touching an item on the panel, but activated by receiving   an incoming call. (To pick up the phone, press [Hang-on]   on the hands-free kit.)   Consult the dealer regarding the camera and its   installation.   Select [Rear View] from the   Information menu.   Note:    ( Operating Instructions)   We do not guarantee use of all the functions of the    Bluetooth-ready mobile phone to be connected.   Switch unit of Bluetooth hands-free kit   [Hang-on]/Blue LED   [Hang-up]/Red LED    The rear view camera image is displayed.    Press   , or   to cancel the rear   view camera display.   Rear view camera menu   Touch the screen while image is displayed to display the   rear view camera menu.    Refer to the Operating Instructions for [Display] operations.   Select [Hide Buttons] to close the Rear view camera menu.   16    16   Receiving a call   Adjust volume   It can adjust the hands-free ring and talk volume when a   call is received. (The Bluetooth hands free screen is only   displayed.)   When a call is received, the   Bluetooth hands free screen is   displayed.   1 Select the volume.    The telephone number of the calling party is   displayed.   Minimum   Middle   Maximum   Press [Hang-on] on the Bluetooth   hands-free kit to answer the phone.   Note:   2  The speaker that outputs the hands-free talk can be   set. ( Operating Instructions)    Speak towards the microphone of the Bluetooth   hands-free kit.   Set the ring tone   If the cellular phone has a “no in-band ringing”   specification, it can be set to ring or not ring when a call   is received.   Note:    Reception of a call when power is off does not turn on   the power of this unit.   “CONNECT” is displayed when information of the   calling party cannot be acquired.    Select [On] or [Off] from Ringing.   Calling back   Calls can only be placed to the last number displayed on   Receiving a call ( above).   Press [Hang-on] on the hands-free kit.   1  [On]: Rings.   [Off]: Does not ring.    The Bluetooth hands free screen is displayed.   Check the number, then press   2 Note:    [Hang-on] on the Bluetooth   hands-free kit again.   If the cellular phone does not have the no in-band   ringing specification, it is not possible to set to ring or   not ring. (Touch keys are not displayed either.)    Once the call is connected, speak towards the   microphone of the Bluetooth hands-free kit.   Hang up   Press [Hang-up] on the Bluetooth   hands-free kit while talking.    The call is ended and the screen returns to the   original display.   17   17   Troubleshooting   If you suspect something wrong   Warning     Check and take steps as described below.   If the unit is out of order (no power, no sound) or   in an abnormal state (has foreign objects in it, is   exposed to water, is smoking, or smells), turn it   off immediately and consult your dealer.   Do not disassemble, modify the unit or attempt to   repair the product yourself. If the product needs to   be repaired, consult your dealer or an authorized   Panasonic Servicenter.   If the described suggestions do not solve the problem,   it is recommended to take the unit to your nearest   authorized Panasonic Servicenter. The product should   be serviced only by qualified personnel. Please refer   checking and repair to professionals.   Panasonic shall not be liable for any accidents arising   out of neglect of checking the unit or your own repair   after your checking.   Never take measures except those indicated by   italic letters in “Possible solution” described below   because those are too dangerous for users to handle   themselves.   XM Satellite Radio control   Problem   Possible cause  Possible solution   No contract with XM Satellite Radio Inc..   Refer to page 8 of this book and the XM’s website to sign up for XM radio   service.   Channel unselectable   VCR, Camcorder, Rear view camera, Rear monitor   Problem   Possible cause  Possible solution   The picture from a car   navigation system is   not displayed.   The connection of a car navigation system is not correct.   Connect it correctly.   The picture from a   VCR or a camcorder is   not displayed.   A VCR or camcorder is not connected correctly.   Connect a VCR or camcorder correctly.   Rear view camera is not connected correctly.   Connect a rear view camera correctly.   The picture from a rear   view camera is not   displayed.   “Rear View Camera” is set to [Off] under Install. Setting screen.   Set “Rear View Camera” to [On].   iPod   Problem   Possible cause  Possible solution   The iPod was not recognized correctly.   Check the connection.   Reset the iPod, then connect it again.   The iPod is an old version.   The iPod does not   function normally.   Update the iPod version, then connect it again.   There is a “bump”   sound at the start of a   track during playback.   There is no problem with the iPod or the system.   The iPod continues to   display “ Strada”   even after it has been   disconnected from the   system.   Reset the iPod.   18   18   Error display messages   Problem   Possible cause  Possible solution    XM Satellite Radio control   Cannot receive XM Satellite Radio.   Verify the wiring.   NO XM   XM antenna unconnected.   Connect the XM antenna.   CHECK ANTENNA   NO SIGNAL   OFF AIR   XM broadcasts unreceivable because of poor receiving conditions.   Move to an area where XM broadcasts can be received well.   Channel is not in service.   This channel is not currently in service. Select another channel.    SIRIUS Satellite Radio control   Cannot receive SIRIUS Satellite Radio.   Verify the wiring.   NO SIRIUS   SIRIUS antenna unconnected.   Connect the SIRIUS antenna.   ANTENNA ERROR   ACQUIRING SIGNAL   SIRIUS broadcasts unreceivable because of poor receiving conditions.   Move to an area where SIRIUS broadcasts can be received well.   User’s registration has not been carried out.   Complete user’s registration.   Call 888-539-SIRIUS   SUB UPDATED   A channel that is not included in the agreement was selected.   Select a channel that is included in the agreement. Refer to the operating   instructions for SIRIUS Satellite Radio Tuner with regard to the agreement.   The subscription information was updated.   Wait for 3 minutes in the SIRIUS mode.   Your location is out of the reception area (for example, in a tunnel), or the unit is   decoding a selected broadcast. The display appears also while the connections are   being checked after the power has been turned on.   Wait until getting out of the unreceivable area or completing the decoding.    iPod control   The iPod cable was disconnected in the iPod mode.   Reconnect the iPod cable.   Communication error   Your iPod has no playable music.   Download playable music to your iPod.   No data   19   19   Panasonic Consumer   Electronics Company,   Division of Panasonic   Corporation of North America   One Panasonic Way, Secaucus,   New Jersey 07094   Panasonic Puerto Rico, Inc.   Ave. 65 de Infanteria, Km. 9.5   San Gabriel Industrial Park,   Carolina, Puerto Rico 00985   Panasonic Canada Inc.   5770 Ambler Drive,   Mississauga, Ontario   L4W 2T3   © 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.   © 2007 Matsushita Electric Industrial Co., Ltd. Tous droits réservés.   YEFM285972 F0107-1037   Printed in Japan   Imprimé au Japon   Impreso en Japan   |