Panasonic Camcorder DMC ZS30 User Manual

Basic Owner’s Manual  
Digital Camera  
Model No.  
DMC-ZS30  
Please read these instructions carefully before using this  
product, and save this manual for future use.  
More detailed  
instructions on the  
operation of this  
camera are contained in “Owner’s  
Manual for advanced features (PDF  
format)” in the supplied disc. Install  
it on your PC to read it.  
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,  
VQT4S89  
M0113KZ0  
P
WARNING:  
To reduce the risk of fire, electric shock or product damage,  
Do not expose this unit to rain, moisture, dripping or  
splashing.  
Use only the recommended accessories.  
Do not remove covers.  
Do not repair this unit by yourself. Refer servicing to  
qualified service personnel.  
About the battery pack  
CAUTION  
Battery pack (Lithium ion battery pack)  
• Use the specified unit to recharge the battery pack.  
• Do not use the battery pack with equipment other than the specified unit.  
• Do not get dirt, sand, liquids, or other foreign matter on the terminals.  
• Do not touch the plug terminals (+ and −) with metal objects.  
• Do not disassemble, remodel, heat or throw into fire.  
If any electrolyte should come into contact with your hands or  
clothes, wash it off thoroughly with water.  
If any electrolyte should come into contact with your eyes, never  
rub the eyes. Rinse eyes thoroughly with water, and then consult a  
doctor.  
CAUTION  
• Danger of explosion if battery is incorrectly replaced. Replace  
only with the type recommended by the manufacturer.  
• When disposing the batteries, please contact your local  
authorities or dealer and ask for the correct method of disposal.  
• Do not heat or expose to flame.  
• Do not leave the battery(ies) in a car exposed to direct sunlight for a  
long period of time with doors and windows closed.  
Warning  
Risk of fire, explosion and burns. Do not disassemble, heat above  
60 °C (140 °F) or incinerate.  
(ENG) VQT4S89  
3
FCC Note:  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
FCC Caution: To assure continued compliance, follow the attached  
installation instructions and use only shielded  
interface cables with ferrite core when connecting to  
computer or peripheral devices.  
Any changes or modifications not expressly approved by the  
party responsible for compliance could void the user’s authority to  
operate this equipment.  
Declaration of Conformity  
Trade Name:Panasonic  
Model No.:DMC-ZS30  
Responsible Party:Panasonic Corporation  
of North America  
One Panasonic Way,  
Secaucus, NJ 07094  
Support Contact: Panasonic Consumer  
Marketing Company of  
North America  
1-800-211-PANA (7262)  
DMC-ZS30  
This device complies with Part 15 of the  
FCC Rules. Operation is subject to the  
following two conditions: (1) This device  
may not cause harmful interference, and  
(2) this device must accept any interference  
received, including interference that may  
cause undesired operation.  
4
VQT4S89 (ENG)  
About the AC adaptor (supplied)  
CAUTION!  
To reduce the risk of fire, electric shock or product damage,  
Do not install or place this unit in a bookcase, built-in cabinet or in  
another confined space. Ensure this unit is well ventilated.  
AC adaptor  
This AC adaptor operates on AC between 110V and 240V.  
But  
• In the U.S.A. and Canada, the AC adaptor must be connected to  
a 120V AC power supply only.  
• When connecting to an AC supply outside of the U.S.A. or  
Canada, use a plug adaptor to suit the AC outlet configuration.  
Cautions for Use  
• Do not use any other USB connection cables except the supplied one or a  
genuine Panasonic USB connection cable (DMW-USBC1: optional).  
• Always use a genuine Panasonic HDMI micro cable (RP-CHEU15: optional).  
Part number: RP-CHEU15 (1.5 m) (4.9 feet)  
• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).  
Keep this unit as far away as possible from electromagnetic equipment  
(such as microwave ovens, TVs, video games etc.).  
• If you use this unit on top of or near a TV, the pictures and/or sound on this  
unit may be disrupted by electromagnetic wave radiation.  
• Do not use this unit near cell phones because doing so may result in noise  
adversely affecting the pictures and/or sound.  
• Recorded data may be damaged, or pictures may be distorted, by strong  
magnetic fields created by speakers or large motors.  
• Electromagnetic wave radiation generated by microprocessors may adversely  
affect this unit, disturbing the pictures and/or sound.  
• If this unit is adversely affected by electromagnetic equipment and stops  
functioning properly, turn this unit off and remove the battery or disconnect  
AC adaptor (supplied)/AC adaptor (DMW-AC5PP: optional). Then reinsert the  
battery or reconnect AC adaptor and turn this unit on.  
Do not use this unit near radio transmitters or high-voltage lines.  
• If you record near radio transmitters or high-voltage lines, the recorded  
pictures and/or sound may be adversely affected.  
(ENG) VQT4S89  
5
Certification and Compliance  
See Camera for the certification and compliance mark specific to  
that device.  
1 Select [Wi-Fi Setup] in the [Wi-Fi] menu  
2 Press  
to select [Approved Regulations], and press  
[MENU/SET]  
Contains FCC ID: VPYLBXN604  
This transmitter must not be co-located or operated in conjunction  
with any other antenna or transmitter.  
This equipment complies with FCC radiation exposure limits set  
forth for an uncontrolled environment and meets the FCC radio  
frequency (RF) Exposure Guidelines in Supplement C to OET65.  
This equipment has very low levels of RF energy that are deemed  
to comply without testing of specific absorption ratio (SAR).  
This product is licensed under the AVC patent portfolio license for the personal  
and non-commercial use of a consumer to (i) encode video in compliance  
with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was  
encoded by a consumer engaged in a personal and non-commercial activity  
and/or was obtained from a video provider licensed to provide AVC Video. No  
license is granted or shall be implied for any other use. Additional information  
may be obtained from MPEG LA, LLC.  
6
VQT4S89 (ENG)  
Contents  
Information for Your Safety .... 2 GPS and map functions........ 22  
Before use................................8 Recording/viewing pictures  
Standard accessories ............. 9 with a smartphone/tablet...... 26  
Names and Functions of  
Reading the Owner’s Manual  
Main Parts ..............................10 (PDF format)...........................31  
Touch operations................... 12 Supplied software.................. 32  
Inserting and removing the  
battery or SD memory card  
Specifications........................33  
Digital Camera Accessory  
(optional) ................................14 System....................................36  
Charging the battery ............. 15 Digital Camera Accessory  
Setting the clock....................16 Order Form.............................37  
Setting the menu ................... 18 Limited Warranty  
Taking pictures ......................19 (ONLY FOR U.S.A. AND  
Recording motion pictures... 20 PUERTO RICO) ......................38  
Viewing your pictures ........... 21  
Deleting pictures ................... 21  
(ENG) VQT4S89  
7
Before use  
Camera handling  
Keep the camera away from excessive vibration, force, or  
pressure.  
The camera is not dust resistant, splash resistant, or waterproof.  
Avoid using the camera in places with excessive dust or sand, or  
where water can come into contact with the camera.  
Condensation (When the lens or the LCD monitor is fogged up)  
Condensation may occur when the camera is exposed to sudden  
changes of temperature or humidity. Avoid these conditions, which  
may make the lens or LCD monitor dirty, cause mold, or damage  
the camera.  
If condensation does occur, turn off the camera and wait about two  
hours before using it. Once the camera adjusts to the surrounding  
temperature, the fogging will clear naturally.  
About the compass  
Information measured with this unit is simply a rough estimate.  
• Please do not use for professional applications.  
• When using this unit for mountain climbing, trekking, or  
underwater, in addition to using the measured direction as a rough  
estimate, please make sure to bring along a map and a dedicated  
measuring instrument.  
8
VQT4S89 (ENG)  
Standard accessories  
Check that all the accessories are supplied before using the camera.  
Part numbers are as of January 2013. These may be subject to change.  
Battery pack  
DVD  
DMW-BCM13PP  
• Charge the battery  
before use.  
Battery pack is indicated as  
battery pack or battery in the  
text.  
VFF1146  
• Software:  
Use it to install the software  
on your PC.  
• Map data  
• Owner’s Manual for  
advanced features  
DVD is indicated as disc in  
the text.  
AC adaptor  
VSK0768  
Hand strap  
VFC4297  
USB connection  
cable  
K1HY08YY0031  
• SD Memory Card, SDHC Memory Card and SDXC Memory Card  
are indicated as card in the text.  
Cards are optional. You can record or play back pictures on the  
built-in memory when you are not using a card.  
• For information about optional accessories, refer to the “Digital  
Camera Accessory System”.  
• If any accessories are lost, customers should contact Panasonic’s  
parts department at 1-800-833-9626 for further information about  
obtaining replacement parts.  
• Please dispose of all packaging appropriately.  
• Keep small parts in a safe place out of the reach of children.  
• The illustrations and screens in this manual may differ from the  
actual product.  
(ENG) VQT4S89  
9
Names and Functions of Main Parts  
Mode dial  
Flash  
Self-timer indicator/AF Assist Lamp  
NFC antenna  
Lens barrel  
Lens  
• Do not touch the lens barrier.  
Speaker  
Zoom lever  
Microphones  
Motion picture  
button  
GPS status  
indicator  
Camera [ON/OFF]  
button  
[Wi-Fi] antenna  
Built-in GPS antenna  
Shutter button  
*
Tripod mount  
• Ensure that the tripod is stable.  
Card/Battery door  
Release lever  
DC coupler cover  
*
Do not attach to a tripod with a 5.5 mm (0.22 inch) or longer screw. Doing so  
may damage this unit.  
Always use a genuine Panasonic AC adaptor (DMW-AC5PP:  
optional).  
When using an AC adaptor, ensure that the Panasonic DC coupler  
(DMW-DCC14: optional) and AC adaptor (DMW-AC5PP: optional)  
are used.  
10  
VQT4S89 (ENG)  
[EXPOSURE] button  
[MAP] button  
[Wi-Fi] button  
Playback button  
Cursor buttons  
[MENU/SET]  
Charging lamp/  
Wi-Fi connection lamp  
LCD monitor  
[Q.MENU]/  
[
] (Delete/Cancel) button  
[DISP.] button  
We recommend using the supplied  
hand strap to avoid dropping the  
camera.  
*
[HDMI] socket  
[AV OUT/DIGITAL]  
socket  
• This socket is also  
used when charging  
the battery.  
*
Do not connect any other cables except the HDMI micro cable (RP-CHEU15:  
optional). Doing so may cause malfunction.  
(ENG) VQT4S89  
11  
Touch operations  
This camera’s touch screen senses pressure that is applied to the  
screen.  
Touch  
To touch” is to press the touch screen and then  
pull the finger back again.  
Touching is used to select icons or pictures, among  
other actions.  
Drag  
To drag” is to touch and slide your finger  
across the touch screen surface.  
Dragging (sliding your finger across the screen) is  
used to scroll the pictures or change the range of the  
pictures displayed.  
Pinch (spread/pinch)  
On the touch panel, spread (pinch out) your 2  
fingers to zoom in, and pinch (pinch in) your 2  
fingers to zoom out. You use it when zooming  
in/out of playback pictures etc.  
You can also zoom in by quickly touching the touch  
screen twice. (If the display was enlarged, it returns  
to the same magnification ratio.)  
12  
VQT4S89 (ENG)  
If the type of sheet made to protect LCD screens that are available  
in the market is to be used, observe the precautions that are  
contained with the sheet. (Some types of protective sheets may  
impair the screen’s appearance and ease of operation.)  
If the camera is used with a protective sheet available on the market  
attached to its screen or if the screen is not very responsive, touch  
the screen with a little more pressure.  
If your hand is pressed against the touch screen when holding the  
camera, the touch screen will not work properly.  
Do not press on the LCD monitor with hard pointed tips, such as  
ballpoint pens.  
Do not press the touch screen with your fingernails.  
Clean the LCD monitor with a soft, dry cloth if there are fingerprints  
or other kinds of dirt on it.  
(ENG) VQT4S89  
13  
Inserting and removing the battery or  
SD memory card (optional)  
Make sure that the camera is turned off.  
Slide the release lever ( ) to  
the [OPEN] position and open  
the card/battery door  
[OPEN] [LOCK]  
Insert the battery and card,  
making sure that their  
orientation is correct  
• Battery: Insert the battery all the way  
firmly and check that it is  
locked by lever ( ).  
• Card: Insert the card all the way firmly  
until it clicks.  
Do not touch  
the terminals  
on the back of  
the card.  
Close the door  
Slide the release lever to the [LOCK]  
position.  
To remove  
To remove battery:  
Move lever in direction of  
arrow.  
To remove card:  
Push the card until it clicks,  
then pull the card out.  
Lever  
Pull out  
Press  
Always use genuine Panasonic batteries (DMW-BCM13PP).  
If you use other batteries, we cannot guarantee the quality of this  
product.  
Keep the Memory Card out of reach of children to prevent  
swallowing.  
We recommend using a Panasonic card.  
14  
VQT4S89 (ENG)  
Charging the battery  
The battery that can be used with this unit is DMW-BCM13PP.  
The battery is not charged when the camera is shipped. Charge  
the battery before use.  
Charge the battery with the AC adaptor (supplied) indoors  
(10 °C to 30 °C (50 °F to 86 °F)).  
Make sure that the camera is turned off.  
Insert the battery to this unit, and then connect  
this unit to the AC adaptor ( ) (supplied) or a  
PC ( )  
To the electrical outlet  
USB connection cable (supplied)  
Charging lamp (  
On: Charging in progress (approx. 210 min. if fully depleted)  
)
Off: Charging stops  
When using the AC adaptor (supplied), observe the following points as  
improper connections may cause malfunctions.  
Do not use any other USB connection cables except the supplied  
one or a genuine Panasonic USB connection cable (DMW-USBC1:  
optional).  
Do not use any other AC adaptors except the supplied one.  
Do not use the AC adaptor (supplied) or the USB connection cable  
(supplied) with other devices.  
(ENG) VQT4S89  
15  
Setting the clock  
The clock is not set when the camera is shipped.  
Disconnect the unit from the AC adaptor (supplied).  
Press the Camera [ON/OFF]  
button ( )  
Press [MENU/SET] ( )  
Press  
to select the items  
(year, month, day, hour,  
minute, display order or time  
display format), and press  
to set  
Press [MENU/SET] to set  
To cancel → Press [  
] button.  
Confirm the setting and press [MENU/SET]  
To return to the previous screen, press [  
] button.  
Press to select [Yes] and press [MENU/SET]  
if automatically correcting time of day using the  
GPS function  
To manually set date and time →select [No].  
• When you select automatic time adjustment using the GPS  
function, [GPS Setting] is set to [ON].  
16  
VQT4S89 (ENG)  
When [Please set the home area] is displayed,  
press [MENU/SET]  
Press  
to set your home  
area and press [MENU/SET]  
The current time and home area are set.  
Changing time settings  
Select [Clock Set] from [Rec] or [Setup] menu, perform  
Please see the next page on how to set the menu.  
and  
.
(ENG) VQT4S89  
17  
Setting the menu  
Refer to the following procedures to operate the menus.  
Example: Setting [AF Mode] from  
Mode  
to  
in the [Program AE]  
Press [MENU/SET] to display the menu  
Switching to the [Rec] menu  
Use cursor button to select [Rec] and  
press [MENU/SET]  
• The menu type can also be selected  
by touch operations.  
Press  
to select [AF Mode]  
and then press [MENU/SET]  
• Depending on the item, its setting may  
not appear or it may be displayed in a  
different way.  
Press  
to select  
and  
then press [MENU/SET] to set  
Press [ ] button several  
times to close the menu  
18  
VQT4S89 (ENG)  
Taking pictures  
Shutter button  
Press the Camera [ON/OFF] button  
( )  
Set to the desired recording mode  
( )  
Recording mode  
Take pictures with automatic settings.  
Take pictures with automatic shutter speed and aperture value  
settings.  
Determine aperture, then record pictures.  
Determine shutter speed, then record pictures.  
Determine aperture and shutter speed, then record pictures.  
Record pictures using pre-registered settings.  
Record panorama pictures.  
Take pictures using Scene modes.  
Take pictures by selecting your preferred picture effect.  
Take a picture  
Press halfway  
(press lightly and focus)  
Press fully  
(press the button  
all the way to record)  
(ENG) VQT4S89  
19  
Recording motion pictures  
You can record motion pictures with audio (stereo). Zoom can also be  
used during recording.  
Press the motion picture button  
( ) to start recording  
Press the motion picture button  
( ) again to end recording  
Remaining recording time (approx.)  
Elapsed recording time  
Immediately release the motion picture button after pressing it all the  
way.  
You can continuously record a motion picture in [MP4] for up to  
29 minutes 59 seconds or approx. 4 GB. (Since recording in [MP4]  
with [FHD/30p] creates larger files, the recording time for such  
motion pictures will be shorter than 29 minutes 59 seconds.)  
If [Rec Quality] of [AVCHD] motion pictures is set to [FHD], you  
can continuously record a motion picture for up to 29 minutes  
59 seconds.  
If the surrounding temperature is high, or a motion picture is  
recorded continuously,  
is displayed and recording may be  
stopped halfway through to protect the camera.  
Motion pictures cannot be recorded in the built-in memory.  
20  
VQT4S89 (ENG)  
Viewing your pictures  
Press the Playback button ( )  
Drag your finger across the screen,  
and select the picture to be played  
back  
By holding down the Playback button while the camera is off, you  
can turn the camera on in Playback Mode.  
To play back a motion picture, touch after selecting a picture.  
To switch to Recording Mode, press the playback button again or  
press the shutter button halfway during playback.  
Deleting pictures  
Deleted pictures cannot be recovered.  
Press [  
picture  
] button ( ) to delete the displayed  
Press to select [Yes] and then press  
[MENU/SET] ( )  
(ENG) VQT4S89  
21  
GPS and map functions  
Before using the camera, be sure to read “License Agreement  
for Place Name and Map Data” (Owner’s Manual for advanced  
features).  
This camera can record the location information of a place where a  
picture was taken on the pictures.  
The camera can also automatically adjust the time or display a place  
where a picture was taken on a map during playback.  
Your Panasonic Lumix digital still camera is GPS-equipped which can  
automatically record the precise location coordinates of where the  
photo was taken. The specific physical address of this location can  
easily be derived from this information.  
If you upload such “geotagged” photos to the Internet, a social  
networking site or any other electronic media, the precise location of  
where the photo was taken will remain embedded in the photo and  
can be viewed by others.  
Therefore, when taking digital still photos, care should be taken in  
determining whether you wish to have the GPS feature enabled or  
disabled.  
22  
VQT4S89 (ENG)  
Using the GPS function to execute positioning  
Press [MENU/SET] ( )  
Press  
to select [GPS]  
menu and press [MENU/SET]  
Press to select  
[GPS Setting] and press  
[MENU/SET]  
Press  
to select [ON] and press [MENU/SET]  
• A message appears on the screen. After confirming the  
message, press [MENU/SET].  
When [GPS Setting] is [ON], the GPS function works even if the  
camera is turned off.  
• Electromagnetic waves from the camera can affect instruments  
and meters. During takeoff and landing of airplanes or in other  
restricted areas, set [Airplane Mode] to [ON] and turn off the  
camera.  
• When [GPS Setting] is [ON] and [Airplane Mode] is [OFF], power  
will drain from the battery even if the camera is turned OFF.  
(ENG) VQT4S89  
23  
GPS and map functions  
Displaying the status and result of positioning  
The icons that indicate the status and result of positioning will  
appear on the LCD monitor. When positioning is successful,  
camera will search the place name information (name of place and  
landmark) inside its internal database and display it.  
GPS reception icon  
The same number of icons as the  
number of the GPS satellites (from  
which radio signals are successfully  
received) stop flashing and light.  
If the three bars of the GPS reception  
icon do not light and the icon turns  
off, it means that positioning was  
unsuccessful.  
Positioning  
executed  
successfully  
(blue)  
Positioning result icons  
(Time elapsed after successful  
positioning) (minute)  
Place name  
information  
: Positioning failed. No location  
information/place name information  
available.  
Positioning will take time in environments where it is difficult to  
receive the signals from the GPS satellites. For details, refer  
to “Using the GPS function to record the location of a picture”  
(Owner’s Manual for advanced features).  
Even if GPS reception is good, it will take approx. 2 to 3  
minutes to successfully execute positioning under the following  
conditions;  
• When positioning is executed for the first time  
• When [GPS Setting] was set to [OFF]  
• When [Airplane Mode] was set to [ON] and the camera was  
turned off  
• When the battery was removed  
24  
VQT4S89 (ENG)  
Confirming the place where you took a picture  
using a map  
You can display a map showing the location where a picture was  
taken or your current location.  
If you copy the map data stored on the supplied DVD to a memory  
card, you can display more detailed maps. For details, refer to  
“Using the map data on the disc (supplied)” (Owner’s Manual for  
advanced features).  
Press [MAP] button ( ) in  
playback mode  
Touch the screen to display the current location  
(if positioning is currently available)  
• As with zooming in/out of pictures, you can also zoom in/out  
of the map by operating the zoom lever or by using the pinch  
function.  
You can drag the screen or press the cursor button to operate  
the display location of a map.  
• When you press the [  
display.  
] button, it will return to the previous  
Displaying the recording location  
• When you press the [DISP.] button, the pictures that were  
recorded nearby will be displayed in a list.  
Touch to display another picture  
Touch to narrow down the  
pictures to be displayed  
Place where you took  
the selected picture  
(
)
Picture list  
Place where you took  
the pictures displayed  
Touch to display another picture  
in a list (  
)
(ENG) VQT4S89  
25  
Recording/viewing pictures with a  
smartphone/tablet  
You can use the Wi-Fi function to connect to another device through  
wireless LAN (a system that exchanges information with radio waves  
without using cables), record pictures from an away location, and  
transfer pictures saved in this unit to a TV or PC.  
This section describes how to make a Wi-Fi connection between this  
unit and a smartphone/tablet to record pictures using the smartphone/  
tablet and to transfer pictures to the smartphone/tablet.  
Installing “Image App”  
If you install “Image App” to your smartphone/tablet, you can operate  
this unit from an away location to record or play back pictures.  
The “Panasonic Image App” is an application provided by Panasonic  
that allows your smartphone/tablet to perform the following operations  
of a Wi-Fi-compatible LUMIX. (“Panasonic Image App” is indicated as  
“Image App” in the text.)  
Version  
1.2 or above  
Supported OS  
Android 2.2 - Android 4.2  
iOS 4.3 - iOS 6.0  
Installation procedure  
Connect your smartphone/tablet to the Internet, and please install  
“Image App” from the following site.  
• “Google Play™ Store” (for Android)  
• “App StoreSM” (for iOS)  
• When downloading the app on a mobile network, high packet  
communication fees may be incurred depending on the details of  
your contract.  
To connect this unit with [Wi-Fi Direct], Android OS 4.0 or above is  
required and the device must be compatible with Wi-Fi Direct.  
• The service may not be able to be used properly depending on the  
type of smartphone/tablet being used. For compatible devices, see  
the following support site.  
(This site is available in English only.)  
26  
VQT4S89 (ENG)  
Easily connect to a smartphone/tablet  
Use the NFC (Near Field Communication) function to easily connect  
this unit to a smartphone/tablet with Wi-Fi for remote recording and to  
send pictures to the smartphone/tablet.  
• This function can be used with NFC compatible devices with Android  
(2.3.3 or above). (Not available in certain models)  
Preparation on the smartphone/tablet side  
• Install “Image App” in advance  
• Set Wi-Fi function to “ON”  
(For information on how to adjust settings, please read the manual  
for your smartphone/tablet)  
When manually connecting without the NFC function  
Operating this unit  
Press the [Wi-Fi] button  
Press  
to select [New Connection] and press  
[MENU/SET]  
Press  
to select [Remote Shooting] and press [MENU/SET]  
On your smartphone/tablet  
Select the SSID displayed on the camera, and enter the  
password  
• The SSID displayed differs depending on the connection method.  
To connect [Via Network], select a wireless access point and adjust  
the settings.  
Start up “Image App”  
• When the connection is complete, live images captured by the  
camera will be displayed on the “Image App” screen.  
(ENG) VQT4S89  
27  
Recording/viewing pictures with a smartphone/tablet  
Connecting to a smartphone/tablet  
Start up “Image App” on your smartphone/  
tablet  
Place your smartphone/tablet to the side of this  
unit  
Place over this area  
(within 5 mm (0.20 inch))  
Place the NFC area of your smartphone/tablet over the part of  
this unit as shown in the figure below.  
• Do not bump your smartphone/tablet strongly against this unit.  
(The smartphone/tablet or this unit may get scratched)  
• For information on how to use NFC compatible devices, please  
contact the device manufacturer.  
• If there is no immediate reaction, slightly move the position  
where the smartphone/tablet was placed.  
Press  
to select [Yes] and press [MENU/SET]  
Place your smartphone/tablet over this area of  
the unit again  
• When the connection is complete, live images captured by the  
camera will be displayed on your smartphone/tablet.  
• Connected smartphone/tablet is registered to this unit. From  
the next time and on, you can connect by performing steps  
and  
.
28  
VQT4S89 (ENG)  
Taking pictures via a smartphone/tablet (remote recording)  
Select [  
] on a smartphone/tablet  
• The recorded images are saved in the camera.  
• Some settings are not available.  
• The screen differs depending on the operating system.  
Cannot be set for recording AVCHD motion pictures at [60p] in  
[FHD].  
If the internal camera temperature rises because the surrounding  
temperature is high or a motion picture is recorded continuously,  
recording may be stopped halfway through to protect the camera.  
Also, the picture quality setting change message may be displayed  
when the recording starts.  
Playing back pictures in the camera  
Select [  
] on a smartphone/tablet  
You can save pictures on the smartphone/tablet.  
You can send pictures to a WEB service, etc.  
• The screen differs depending on the operating system.  
You cannot play back motion pictures stored in the camera. Save  
the motion picture on your smartphone/tablet, and then playback.  
(ENG) VQT4S89  
29  
Recording/viewing pictures with a smartphone/tablet  
Transferring a still picture easily to your  
smartphone/tablet  
When transferring just 1 still picture to your smartphone/tablet with  
“Image App” installed, you can use the NFC function to easily send the  
picture.  
Start up “Image App” on your smartphone/  
tablet  
Display the still picture to be transferred to your  
smartphone/tablet on the 1-picture screen (full  
screen)  
Place your smartphone/tablet to the side of this  
unit  
The still picture displayed on this unit is transferred to your  
smartphone/tablet.  
It may take several minutes to complete the picture transfer  
depending on the environment used.  
30  
VQT4S89 (ENG)  
(PDF format)  
Reading the Owner’s Manual  
More detailed instructions on the operation of this camera are  
contained in “Owner’s Manual for advanced features (PDF format)” in  
the supplied disc. Install it on your PC to read it.  
To read the supplied DVD, use a DVD drive with single-sided dual  
layer support.  
For Windows  
Turn the PC on and insert the disc containing  
the Owner’s Manual (supplied)  
Click the [Owner’s Manual]  
Select the desired  
language and then click  
[Owner’s Manual] to install  
To return to the install menu.  
Double-click the “Owner’s  
Manual” shortcut icon on  
the desktop  
When the Owner’s Manual (PDF format) will not open  
You will need Adobe Acrobat Reader 5.0 or later, or Adobe Reader  
7.0 or later to browse or print the Owner’s Manual (PDF format).  
You can download and install a version of Adobe Reader that you  
can use with your OS from the following website.  
(ENG) VQT4S89  
31  
Supplied software  
The supplied disc contains the following software.  
Install the software on your computer to use.  
Pictures can be captured to a PC, and can be viewed,  
PHOTOfunSTUDIO organized, printed, etc. Also, still pictures can be  
9.1 PE  
corrected and motion pictures can be edited.  
• Compatible OS: Windows 8 / 7 / Vista / XP  
The map data recorded on the DVD (supplied) can be  
copied to your card.  
• Compatible OS: Windows 8 / 7 / Vista / XP  
Mac OS X v10.4 / v10.5 / v10.6 /  
v10.7 / v10.8  
LUMIX Map Tool  
1.1  
You can edit motion pictures easily.  
This will only install a shortcut to the trial version  
download site.  
For details about using LoiLoScope, please download  
and see the manual from the following site.  
LoiLoScope  
(30-day full-trial  
version)  
• Compatible OS: Windows 8 / 7 / Vista / XP  
For details about operating environment and usage, please read  
“Owner’s Manual for advanced features” (PDF format) or the manuals  
for each software.  
PHOTOfunSTUDIO / LoiLoScope are not compatible with Mac.  
Installing supplied software  
Preparations:  
• Check the environment of your PC.  
• Before inserting the disc, close all running applications.  
Insert the supplied disc in the computer drive and then install the  
software.  
For Windows  
Click on the [Applications] on the install menu  
For Mac (LUMIX Map Tool)  
Double-click the [LUMIX Map Tool.pkg] within  
[Application] - [MAPTOOL] of the DVD (supplied)  
32  
VQT4S89 (ENG)  
Specifications  
Specifications are subject to change without notice.  
Digital Camera: Information for your safety  
Power Source  
Power  
DC 5.1 V  
When recording: 1.7 W  
Consumption When playing back: 1.1 W  
Camera effective 18,100,000 pixels  
pixels  
Image sensor  
1/2.3″ MOS sensor,  
total pixel number 18,900,000 pixels  
Primary color filter  
Lens  
Optical 20 x zoom  
[NANO SURFACE f=4.3 mm to 86.0 mm  
COATING]  
(35 mm film camera equivalent:  
24 mm to 480 mm) /  
F3.3 (Max. Wide) to F6.4 (Max. Tele)  
Image Stabilizer Optical method  
Focus range  
P / A / S / M  
50 cm (1.6 feet) (Max. Wide) /  
2 m (6.6 feet) (Max. Tele) to  
Macro /  
3 cm (0.098 feet) (Max. Wide) /  
1 m (3.3 feet) (Max. Tele) to  
(5 × to 7 × is 2 m (6.6 feet) to  
Intelligent  
Auto /  
)
Motion picture  
Scene Mode  
The focus ranges listed above may vary  
depending on the selected Scene Mode.  
Shutter system  
Electronic shutter + Mechanical shutter  
Minimum  
Illumination  
Approx. 10 lx (when i-Low light is used, the  
shutter speed is 1/30th of a second)  
Shutter speed  
Exposure (AE)  
Metering Mode  
4 seconds to 1/2000th of a second  
[Starry Sky] Mode: 15 seconds, 30 seconds  
Program AE (P) / Aperture-priority AE (A) /  
Shutter-priority AE (S) / Manual exposure (M)  
[Multi Metering] / [Center Weighted] / [Spot]  
(ENG) VQT4S89  
33  
Specifications  
LCD monitor  
3.0″ TFT LCD (4:3) (Approx. 921,600 dots)  
(field of view ratio about 100%) / Touch screen  
Microphones  
Speaker  
Stereo  
Monaural  
Recording media Built-in Memory (Approx. 12 MB)  
SD Memory Card / SDHC Memory Card /  
SDXC Memory Card  
Recording file  
format  
Still picture  
JPEG (based on Design rule for Camera File  
system, based on Exif 2.3 standard /  
DPOF corresponding) / MPO  
Motion pictures AVCHD / MP4  
Audio  
AVCHD: Dolby® Digital (2 ch)  
MP4: AAC (2 ch)  
compression  
format  
Interface  
Digital  
USB 2.0 (High Speed)  
NTSC Composite  
Analog video  
Audio  
Audio line output (Monaural)  
Terminal  
HDMI: MicroHDMI TypeD  
AV OUT/DIGITAL: Dedicated jack (8 pin)  
Dimensions  
Approx. 108.3 mm (W) x 58.9 mm (H) x 27.7 mm (D)  
[4.26″ (W) x 2.32″ (H) x 1.09″ (D)]  
(excluding the projection part)  
Mass (Weight)  
With card and battery: Approx. 198 (0.437 lb)  
Excluding card and battery: Approx. 172 (0.379 lb)  
Operating  
temperature  
0 °C to 40 °C (32 °F to 104 °F)  
Operating  
humidity  
10%RH to 80%RH  
Language select [ENGLISH] / [ESPAÑOL]  
34  
VQT4S89 (ENG)  
Wireless transmitter  
Compliance  
standard  
IEEE 802.11b/g/n  
(standard wireless LAN protocol)  
Frequency range 2412 MHz to 2462 MHz (1 - 11ch)  
used  
(central  
frequency)  
Encryption  
method  
Wi-Fi compliant WPA™ / WPA2™  
Access method Infrastructure mode  
AC adaptor  
(Panasonic VSK0768): Information for your safety  
Input  
~ 110 V to 240 V, 50/60 Hz, 0.2 A  
5 V, 800 mA  
Output  
Battery pack (lithium-ion)  
(Panasonic DMW-BCM13PP): Information for your safety  
Voltage / capacity 3.6 V / 1250 mAh  
(ENG) VQT4S89  
35  
Digital Camera Accessory System  
Description  
Accessory#  
1
*
2
Battery pack  
DMW-BCM13  
DMW-DCC14  
DMW-AC5  
*
DC coupler  
AC adaptor  
Marine case  
2
3
* *  
4
*
DMW-MCTZ40  
DMW-USBC1  
DMW-AVC1  
RP-CHEU15  
USB connection cable  
AV cable  
HDMI micro cable  
1 The battery pack can be charged from the camera using the AC adaptor  
(supplied).  
*
2 The AC adaptor (optional) can only be used with the designated Panasonic  
DC Coupler (optional). The AC adaptor (optional) cannot be used by itself.  
*
3 This AC adaptor (optional) cannot be used to charge the battery pack. Use  
*
supplied AC adaptor to charge the battery pack.  
4 NFC functions cannot be used while using a marine case.  
*
Product numbers are correct as of January 2013. These may be  
subject to change.  
Accessories and/or model numbers may vary between countries.  
Consult your local dealer.  
36  
VQT4S89 (ENG)  
Digital Camera Accessory Order Form  
Please photocopy this form when placing an order.  
1. Digital Camera Model #  
2. Items Ordered  
Accessory #  
Description  
Price Each  
Quantity  
Total Price  
$6.95  
Shipping & Handling  
Subtotal  
Your State & Local Sales Tax  
Total  
3. Method of payment (check one)  
American Express  
VISA  
MasterCard  
Discover  
Credit Card #  
Expiration Date  
Customer Signature  
(Please do not send cash)  
4. Shipping information (UPS delivery requires complete street address)  
Ship To:  
Mr.  
Mrs.  
Ms.  
Phone#:  
First  
Last  
Day  
(
)
)
Street Address  
City  
Night  
(
State  
Zip  
TO OBTAIN ANY OF OUR DIGITAL CAMERA ACCESSORIES YOU CAN DO ANY OF  
THE FOLLOWING:  
VISIT YOUR LOCAL PANASONIC DEALER  
OR  
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368  
[6 AM-6 PM M-F, PACIFIC TIME]  
OR  
MAIL THIS ORDER TO: PANASONIC NATIONAL PARTS CENTER  
20421 84th Ave S., Kent, WA 98032  
(ENG) VQT4S89  
37  
Limited Warranty  
(ONLY FOR U.S.A. AND PUERTO RICO)  
Panasonic Consumer Marketing Company of North America,  
Division of Panasonic Corporation of North America  
One Panasonic Way, Secaucus, New Jersey 07094  
Panasonic Products Limited Warranty  
Limited Warranty Coverage (For USA and Puerto Rico Only)  
If your product does not work properly because of a defect in materials or  
workmanship, Panasonic Consumer Marketing Company of North America  
(referred to as “the warrantor”) will, for the length of the period indicated on the  
chart below, which starts with the date of original purchase (“warranty period”),  
at its option either (a) repair your product with new or refurbished parts, (b)  
replace it with a new or a refurbished equivalent value product, or (c) refund  
your purchase price. The decision to repair, replace or refund will be made by  
the warrantor.  
Product or Part Name  
Digital Camera  
Parts  
Labor  
1 Year  
1 Year  
All included Accessories  
(Except Non-Rechargeable Batteries)  
90 Days  
10 Days  
Not Applicable  
Not Applicable  
Only Non-Rechargeable Batteries  
During the “Labor” warranty period there will be no charge for labor. During the  
“Parts” warranty period, there will be no charge for parts. This Limited Warranty  
excludes both parts and labor for non-rechargeable batteries, antennas, and  
cosmetic parts (cabinet). This warranty only applies to products purchased and  
serviced in the United States or Puerto Rico. This warranty is extended only to  
the original purchaser of a new product which was not sold “as is”.  
38  
VQT4S89 (ENG)  
Mail-In Service  
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship  
the product prepaid to:  
Panasonic Exchange Center  
4900 George McVay Drive  
Suite B  
McAllen, TX 78503  
Online Repair Request  
To submit a new repair request and for quick repair status visit our Web Site at  
When shipping the unit, carefully pack, include all supplied accessories listed in  
the Owner’s Manual, and send it prepaid, adequately insured and packed well in  
a carton box. When shipping Lithium Ion batteries please visit our Web Site at  
the most up to date information. Include a letter detailing the complaint, a return  
address and provide a daytime phone number where you can be reached. A  
valid registered receipt is required under the Limited Warranty.  
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE  
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF  
OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND  
PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR  
OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.  
Limited Warranty Limits And Exclusions  
This warranty ONLY COVERS failures due to defects in materials or  
workmanship, and DOES NOT COVER normal wear and tear or cosmetic  
damage. The warranty ALSO DOES NOT COVER damages which occurred  
in shipment, or failures which are caused by products not supplied by the  
warrantor, or failures which result from accidents, misuse, abuse, neglect,  
mishandling, misapplication, alteration, faulty installation, set-up adjustments,  
misadjustment of consumer controls, improper maintenance, power line surge,  
lightning damage, modification, introduction of sand, humidity or liquids,  
commercial use such as hotel, office, restaurant, or other business or rental  
use of the product, or service by anyone other than a Factory Service Center or  
other Authorized Servicer, or damage that is attributable to acts of God.  
(ENG) VQT4S89  
39  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER  
“LIMITED WARRANTY COVERAGE”.  
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING  
OUT OF ANY BREACH OF THIS WARRANTY.  
(As examples, this excludes damages for lost time, travel to and from the  
servicer, loss of or damage to media or images, data or other memory or  
recorded content. The items listed are not exclusive, but for illustration only.)  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY  
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED  
WARRANTY.  
Some states do not allow the exclusion or limitation of incidental or  
consequential damages, or limitations on how long an implied warranty lasts, so  
the exclusions may not apply to you.  
This warranty gives you specific legal rights and you may also have other rights  
which vary from state to state. If a problem with this product develops during  
or after the warranty period, you may contact your dealer or Service Center.  
If the problem is not handled to your satisfaction, then write to the warrantor’s  
Consumer Affairs Department at the addresses listed for the warrantor.  
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED  
WARRANTY, ARE YOUR RESPONSIBILITY.  
40  
VQT4S89 (ENG)  
Customer Services Directory (United States and Puerto Rico)  
Obtain Product Information and Operating Assistance; locate your  
nearest Dealer or Service Center; purchase Parts and Accessories; or  
make Customer Service and Literature requests by visiting our Web  
Site at:  
or, contact us via the web at:  
You may also contact us directly at:  
1-800-211-PANA (7262)  
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST  
For hearing or speech impaired TTY users, TTY: 1-877-833-8855  
Accessory Purchases (United States and Puerto Rico)  
Purchase Parts, Accessories and Instruction Books online for all Panasonic  
Products by visiting our Web Site at:  
Or, send your request by E-mail to:  
You may also contact us directly at:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)  
(Monday-Friday 9am-9pm EST)  
Panasonic National Parts Center  
20421 84th Ave S., Kent, WA 98032  
(We accept Visa, MasterCard, Discover Card, American Express)  
For hearing or speech impaired TTY users, TTY: 1-866-605-1277  
As of October 2012  
(ENG) VQT4S89  
41  
• HDMI, the HDMI Logo, and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC in  
the United States and other countries.  
• HDAVI Control™ is a trademark of Panasonic  
Corporation.  
• “AVCHD”, “AVCHD Progressive” and the  
“AVCHD Progressive” logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
• SDXC Logo is a trademark of SD-3C, LLC.  
• QuickTime and the QuickTime logo are  
trademarks or registered trademarks of Apple  
Inc., used under license therefrom.  
• Windows and Windows Vista are either  
registered trademarks or trademarks of Microsoft  
Corporation in the United States and/or other  
countries.  
• Mac and Mac OS are trademarks of Apple Inc.,  
registered in the U.S. and other countries.  
This product incorporates the following software:  
(1) the software developed independently by or for Panasonic Corporation,  
(2) the software owned by third party and licensed to Panasonic Corporation  
and/or,  
(3) open sourced software including the software developed by the OpenSSL  
Project for use in the OpenSSL Toolkit (http://www.openssl.org/), and the  
software written by Eric Young ([email protected]).  
For the software categorized as (1) and (2), please view the information  
by pressing [MENU/SET], displaying [Setup] → [Version Disp.], and then  
pressing [MENU/SET]. For the software categorized as (3), please refer to  
the applicable license terms in the following “Owner’s Manual for advanced  
features (PDF format)”.  
42  
VQT4S89 (ENG)  
• App Store is a service mark of Apple Inc.  
• Android and Google Play are trademarks or registered trademarks of Google Inc.  
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.  
• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.  
• “Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or  
registered marks of the Wi-Fi Alliance.  
• DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or  
certification marks of the Digital Living Network Alliance.  
• This product uses “DynaFont” from DynaComware Corporation. DynaFont is a  
registered trademark of DynaComware Taiwan Inc.  
• Other names, company names, and product names mentioned in these  
instructions are trademarks or registered trademarks of the companies  
concerned.  
-If you see this symbol-  
Information on Disposal in other Countries outside  
the European Union  
This symbol is only valid in the European Union. If you  
wish to discard this product, please contact your local  
authorities or dealer and ask for the correct method of  
disposal.  
Panasonic Consumer Marketing Company of North America,  
Division of Panasonic Corporation of North America  
One Panasonic Way, Secaucus, NJ 07094  
© Panasonic Corporation 2013  
Printed in Japan  

QSC Audio Car Amplifier CX204V User Manual
PYLE Audio PYLE Dryver Series PLAD3300D User Manual
Philips GoGear SA6087 User Manual
Philips BD R BR5S2J01F User Manual
Munchkin Gas Fired Hot Water Boiler User Manual
Metra Electronics 95 8223S User Manual
Laney Amplification Car Amplifier LC50 II User Manual
Kanguru Solutions KFD 512 User Manual
JVC GY HM750U User Manual
JVC GY HD200CHU User Manual