Panasonic AK HC930 User Manual

Panasonic Broadcast  
AK-HC930  
Menu Information  
Menu operations  
Basic setting menu operations  
_ Displaying the menus  
User menu  
_ Entering the menu data  
After accessing the item menus, enter the respective  
data.  
1
Press the MENU button.  
The camera’s USER menu screen now appears on the  
viewfinder or monitor.  
1
Turn the JOG dial to select the menu item to be set.  
VFSetting1  
SideModulation 15  
USERMENU  
ZoneMark  
SafetyMark  
CenterMark  
13:9  
16:9  
OFF  
Operation  
Painting  
Maintenance  
CenterMarkSel1  
LineWidth  
4
2
When the JOG dial is pressed, the setting of the item  
indicated by the arrow flashes.  
2
3
Turn the JOG dial to select the menu item.  
VFSetting1  
SideModulation 15  
ZoneMark  
SafetyMark  
CenterMark  
After having selected the item, press the JOG dial to  
access that item’s menu.  
13:9  
16:9  
OFF  
CenterMarkSel1  
LineWidth  
4
Operation  
VFSetting1  
VFSetting2  
VFDisplay1  
VFDisplay2  
Setting1  
Setting2  
Setting3  
INCOM  
3
Turn the JOG dial to change the setting.  
!LED  
7"VF  
VFSetting1  
SideModulation 15  
ZoneMark  
SafetyMark  
CenterMark  
4:3  
16:9  
OFF  
CenterMarkSel1  
LineWidth  
4
4
When the JOG dial is pressed, the data is entered.  
VFSetting1  
SideModulation 15  
ZoneMark  
SafetyMark  
CenterMark  
4:3  
16:9  
OFF  
CenterMarkSel1  
LineWidth  
4
<Note>  
Bear in mind that if, in step 3, the MENU switch is set to  
OFF while the setting is flashing, the setting prior to the  
flashing will remain unchanged.  
22  
Menu operations  
_ Entering the menu data (continued)  
When the setting flashes one character at a time, press the  
JOG dial to move the flashing toward the right.  
1
When the JOG dial is pressed, flashing moves toward  
the right.  
CamSetting3  
RETIDRET1  
RETIDRET2  
RETIDRET3  
RETIDRET4  
:ABCD1001  
:EFGH2001  
:IJKL3001  
:WXYZ4001  
CamSetting3  
RETIDRET1  
RETIDRET2  
RETIDRET3  
RETIDRET4  
:ABCD1001  
:EFGH2001  
:IJKL3001  
:WXYZ4001  
2
3
Turn the JOG dial to change the setting.  
CamSetting3  
RETIDRET1  
RETIDRET2  
RETIDRET3  
RETIDRET4  
:AMCD1001  
:EFGH2001  
:IJKL3001  
:WXYZ4001  
When the JOG dial is now pressed, the data is entered.  
CamSetting3  
RETIDRET1  
RETIDRET2  
RETIDRET3  
RETIDRET4  
:AMCD1001  
:EFGH2001  
:IJKL3001  
:WXYZ4001  
23  
Setting menu configuration  
Hierarchical menus  
Operation  
VF Setting1  
Viewfinder settings1  
Side Modulation (for changing the brightness level of the signals outside the zone markers)  
Zone Mark (13:9/4:3/OFF) (for setting the zone markers)  
Safety Mark (16:9/4:3/OFF) (for setting the safety markers)  
Center Mark (for setting the center marker)  
Center Mark Sel (for setting the shape of the center marker)  
Line Width (for changing the thickness of the VF markers)  
VF Setting2  
Viewfinder settings2  
VF DTL (for adjusting VF DTL)  
HD Peak Freq (for adjusting the peak frequency of HD RET signal)  
HD OFFSET Gain (for adjustting the DTL offset gain of HD RET signal)  
HD CRISP (for adjusting the DTL crisp level of HD RET signal)  
D1 Peark Freq (for adjusting the peak frequency of D1 RET signal)  
D1 OFFSET Gain (for adjusting the DTL offset gain of D1 RET signal)  
D1 CRISP (for adjusting the DTL crisp level of D1 RET signal)  
VBS Peak Freq (for adjusting the peak frequency of VBS RET signal)  
VBS OFFSET Gain (for adjusting the DTL offset gain of VBS RET signal)  
VBS CRISP (for adjusting the DTL crisp level of VBS RET signal)  
VF Display1  
Viewfinder display settings  
F Number (for setting the f-number display setting to ON or OFF)  
ZOOM (for setting the zoom value display to ON or OFF)  
FOCUS (for setting the focus value display to ON or OFF)  
EXTENDER (for setting the lens extender display to ON or OFF)  
MONI OUT(for setting the monitor selection output display to ON or OFF)  
FILTER (for setting the CC/ND filter display to ON or OFF)  
M GAIN (for setting the gain display to ON or OFF)  
SHUTTER (for setting the electronic shutter display to ON or OFF)  
5600K (for setting the D5600K display to ON or OFF)  
AUDIO LEVEL (for setting the audio level display to ON or OFF)  
VF Display2  
Viewfinder display settings  
OPT LEVEL (for setting the optical level display to ON or OFF)  
RET SEL (for setting the DET selection display to ON or OFF)  
STATUS (for setting the display appearing when functions are selected to ON or OFF)  
ALARM (for setting the alarm display to ON or OFF)  
FRAME RATE (for setting the frame rate display to ON or OFF)  
VOLTAGE (for setting the supply voltage display to ON or OFF)  
COLOR TEMP (for setting the color temperature display to ON or OFF)  
White Ch (for setting the white balance memory)  
FAN POWER (for setting the camera fan to ON or OFF)  
FAN MODE (for setting the camera fan mode)  
Setting1  
Camera settings1  
USER SW (for setting the user switch)  
OUTPUT SEL (for setting the analog output to Y/Pb/Pr or RGB)  
H PHASE (for setting the horizontal phase)  
CABLE COMP (for setting the analog output cable compensation)  
Setting2  
Camera settings2  
VTR/RET.SEL (for setting the VTR/RET SEL SW function)  
GRIP RET 1 (for setting the grip RET1 SW function)  
GRIP RET 2 (for setting the grip RET2 SW function)  
HND LNS VTR (for setting the handy lens VTR SW function)  
HND LNS RET (for setting the hand-held lens return SW function)  
STD LNS RET1 (for setting the standard lens RET 1 SW function)  
STD LNS RET2 /(for setting the standard lens RET 2 SW function)  
EXT RET1 (for setting the external return control SW1 function)  
EXT RET2 (for setting the external return control SW2 function)  
RET MODE (for setting the return SW operation mode)  
RET ID RET1 (for setting the RET1 designation)  
RET ID RET2 (for setting the RET2 designation)  
RET ID RET3 (for setting the RET3 designation)  
RET ID RET4 (for setting the RET4 designation)  
GAIN SW LOW (for setting the gain SW to LOW gain)  
GAIN SW MID (for setting the gain SW to MID gain)  
GAIN SW HIGH (for setting the gain SW to HIGH gain)  
ID NUMBER (for setting the camera number and designation)  
Setting3  
Camera settings3  
CH1 ENG/PD (for switching INCOM1)  
CH2 ENG/PD (for switching INCOM2)  
INCOM  
INCOM settings  
CH1 CCU/CRANE (for switching crane INCOM)  
CH2 CCU/CRANE (for switching crane INCOM)  
!LED  
GAMMA OFF (for displaying the status when the gamma is OFF)  
SHUTTER (for displaying the status when the electronic shutter is ON)  
EXTENDER (for displaying the status when the extender is ON)  
MONI OUT (for displaying the status when the monitor output signal is other than Y)  
FAN OFF (for displaying the status when the fan is OFF)  
Camera status display  
settings  
GAIN (for displaying the status when the gain is other than 0 dB)  
BLACK GAMMA (for displaying the status when the black gamma is ON)  
7"VF  
VF FAN SPEED (for controlling the fan speed of the 7z viewfinder)  
24  
Setting menu configuration  
Hierarchical menus  
Painting  
CAM SETTING SW  
Image ON/OFF settings  
FLARE (for setting the flare to ON or OFF)  
BLACK GAMMA (for setting the black gamma to ON or OFF)  
GAMMA (for setting the gamma to ON or OFF)  
KNEE (for setting the knee to ON or OFF)  
WHITE CLIP (for setting the white clip to ON or OFF)  
MATRIX (for setting the matrix to ON or OFF)  
DTL (for setting DTL to ON or OFF)  
FLESH DTL (for setting the flesh tone DTL to ON or OFF)  
BLACK SHD  
Black shading adjustments  
CORRECT (for setting the black shading to ON or OFF)  
B H SAW R (for adjusting the R black shading H.SAW)  
B H SAW G (for adjusting the G black shading H.SAW)  
B H SAW B (for adjusting the B black shading H.SAW)  
B H PARA R (for adjusting the R black shading H.parabola)  
B H PARA G (for adjusting the G black shading H.parabola)  
B H PARA B (for adjusting the B black shading H.parabola)  
B V SAW R (for adjusting the R black shading V.SAW)  
B V SAW G (for adjusting the G black shading V.SAW)  
B V SAW B (for adjusting the B black shading V.SAW)  
B V PARA R (for adjusting the R black shading V.parabola)  
B V PARA G (for adjusting the G black shading V.parabola)  
B V PARA B (for adjusting the B black shading V.parabola)  
AUTO V SAW (for setting the auto shading V.SAW to ON or OFF)  
PED M (for adjusting the master pedestal)  
PED R (for adjusting the R pedestal)  
PED B (for adjusting the B pedestal)  
FLARE G (for adjusting the G flare)  
FLARE R (for adjusting the R flare)  
FLARE B (for adjusting the B flare)  
GAIN R (for adjusting the R gain)  
GAIN G (for adjusting the G gain)  
GAIN B (for adjusting the B gain)  
PED/FLARE/GAIN  
Pedestal, flare and gain  
adjustments  
W H SAW R (for adjusting the R white shading H.SAW)  
W H SAW G (for adjusting the G white shading H.SAW)  
W H SAW B (for adjusting the B white shading H.SAW)  
W H PARA R (for adjusting the R white shading H.parabola)  
W H PARA G (for adjusting the G white shading H.parabola)  
W H PARA B (for adjusting the B white shading H.parabola)  
W V SAW R (for adjusting the R white shading V.SAW)  
W V SAW G (for adjusting the G white shading V.SAW)  
W V SAW B (for adjusting the B white shading V.SAW)  
W V PARA R (for adjusting the R white shading V.parabola)  
W V PARA G (for adjusting the G white shading V.parabola)  
W V PARA B (for adjusting the B white shading V.parabola)  
WHITE SHADING  
White shading adjustments  
GAMMA  
Gamma adjustments  
GAMMA M (for adjusting the master gamma)  
GAMMA R (for adjusting the R gamma)  
GAMMA B (for adjusting the B gamma)  
BLACK GAMMA G (for adjusting the G black gamma)  
BLACK GAMMA R (for adjusting the R black gamma)  
BLACK GAMMA B (for adjusting the B black gamma)  
KNEE/WHITE CLIP  
Knee and white clip  
adjustments  
KNEE PNT M (for adjusting the master knee point)  
KNEE PNT R (for adjusting the R knee point)  
KNEE PNT B (for adjusting the B knee point)  
KNEE SLP M (for adjusting the master knee slope)  
KNEE SLP R (for adjusting the R knee slope)  
KNEE SLP B (for adjusting the B knee slope)  
WHITE CLIP LVL (for adjusting the white clip level)  
LINEAR MATRIX  
Matrix adjustments  
R-G (for adjusting the R-G level)  
R-B (for adjusting the R-B level)  
G-R (for adjusting the G-R level)  
G-B (for adjusting the G-B level)  
B-R (for adjusting the B-R level)  
B-G (for adjusting the B-G level)  
25  
Setting menu configuration  
Hierarchical menus  
Painting  
Color Correct1  
Matrix adjustments  
G SAT (for adjusting the Green gain)  
G PHASE (for adjusting the Green phase)  
G_Cy SAT (for adjusting the G_Cy gain)  
G_Cy PHASE (for adjusting the G-Cy phase)  
Cy SAT (for adjusting the Cy gain)  
Cy PHASE (for adjusting the Cy phase)  
Cy_B SAT (for adjusting the Cy_B gain)  
Cy_B PHASE (for adjusting the Cy_B phase)  
B SAT (for adjusting the B gain)  
B PHASE (for adjusting the B phase)  
B_Mg SAT (for adjusting the B_Mg gain)  
B_Mg PHASE (for adjusting the B_Mg phase)  
Color Correct2  
Matrix adjustments  
Mg SAT (for adjusting the Mg gain)  
Mg PHASE (for adjusting the Mg phase)  
Mg_R SAT (for adjusting the Mg_R gain)  
Mg_R PHASE (for adjusting the Mg_R phase)  
R SAT (for adjusting the R gain)  
R PHASE (for adjusting the R phase)  
R_Ye SAT (for adjusting the R-Ye gain)  
R_Ye PHASE (for adjusting the R_Ye phase)  
Ye SAT (for adjusting the Ye gain)  
Ye PHASE (for adjusting the Ye phase)  
Ye_G SAT (for adjusting the Ye_G gain)  
Ye_G PHASE (for adjusting the Ye_G phase)  
DTL1  
DTL adjustments  
V DTL LEVEL (for adjusting the V DTL)  
HDTL (for adjusting the H.DTL)  
CRISP (for adjusting the DTL crisp level)  
PeakFRQ (for selecting the DTL peak frequency)  
DTL-Source (for selecting the DTL source)  
DTL2  
DTL adjustments  
KNEE DTL SW (for setting the knee DTL)  
KNEE DTL GAIN (for adjusting the knee DTL gain)  
2D LPF (for setting the 2D LPF)  
LEVEL DEP (for adjusting the level dependent)  
DARK DTL (for adjusting the dark DTL)  
DTL CLIP+ (for adjusting the clip on the DTL + side)  
DTL CLIP— (for adjusting the clip on the DTL side)  
DTL COMP+ (for adjusting the compensation on the DTL + side)  
DTL COMP— (for adjusting the compensation on the DTL side)  
CORNER DTL (for setting the corner DTL)  
SKIN DTL1  
SKIN tone DTL adjustments  
SKIN Detail (for setting the skin tone detail level)  
SKIN CRISP (for adjusting the skin tone detail crisp)  
AREA SAT (for setting the skin tone area chroma)  
AREA WIDTH (for setting the skin tone area width)  
AREA PHASE (for setting the skintone area phase)  
AREA Ymax (for setting the skin tone area brightness MAX)  
AREA Ymin (for setting the skin tone area brightness MIN)  
AREA SLOPE (for setting the skin tone area edge slope)  
Maintenance  
Date/Time  
Camera s internal calendar function settings  
SD CARD  
SD card operations with  
the camera  
MODE (for selecting the format, load or storage mode)  
FILE No (for setting the file number to be used)  
EXECUTE (for executing card operations)  
FORM CONV  
MODE (for setting the down-converter mode)  
Camera s built-in down-  
converter settings  
Iris Cont  
Auto Iris  
Window Select  
Iris Level  
Pear/Ratio  
A.Iris Range (for setting the range of adjusting fine auto iris level with iris volume joystick)  
A.Iris Speed (for setting the auto iris speed)  
Scene Fine  
FILE SEL (for selecting scene files)  
Load (for loading scene files)  
Store (for storing scene files)  
26  

Prince Castle MUSTARD DISPENSER 398 SL User Manual
Pioneer TS C171PRS User Manual
Pioneer CD Receiver DEH P550MP User Manual
Pioneer Car Stereo System AVH P6400 User Manual
Panasonic Cordless Phone With Answering Machine KX TG7622 User Manual
Nady Systems Car Speaker CX 23SW User Manual
Mackie Car Speaker MR8 User Manual
Listen Technologies DCN LBB 3312 User Manual
Kenwood Car Stereo System KDC HD552U User Manual
JVC GY HM790CHU User Manual