PYLE Audio View Series PLDVCR500 User Manual

User's Manual  
MODEL NO.:PLDVCR600  
PLDVCR500  
view  
In the initial settings, exclusive channel for DVD/Video is set to CH 3.  
Set the TV channel to CH3 before using it.  
Region code of DVD/Video player for home is 1 or ALL.  
In inserting a disc with other region code, it does not operate.  
Please only use a disc with region code 1 or ALL.  
is a 'Prohibition' mark. If this mark is displayed in operating the product,  
please wait for a while, then use it. If 'Prohibition' mark continues to be displayed  
in pressing a button after that, it means the button does not  
function in the currently played disc.  
This set has been designed and manufactured to assure personal safety. Improper use can result in electric  
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following  
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts  
that can be repaired by the user.  
1 READ INSTRUCTIONS  
All the safety and operating instructions should be read before the unit is operated.  
2 RETAIN INSTRUCTIONS  
The safety and operating instructions should be retained for future reference.  
3 HEED WARNINGS  
All warnings on the unit and in the operating instructions should be adhered to.  
4 FOLLOW INSTRUCTIONS  
All operating and use instructions should be followed.  
5 CLEANING  
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use  
a damp cloth for cleaning.  
6 ATTACHMENTS  
Do not use attachments unless recommended by the units manufacturer as they may cause hazards.  
7 WATER AND MOISTURE  
Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet  
basement, or near a swimming pool and the like. Caution : Maintain electrical safety. Powerline operated  
equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the  
accessory itself and should not be modified so as to defeat the safety features. This will help avoid any potential  
hazard from electrical shock or fire. If in doubt, contact qualified service personnel.  
8 ACCESSORIES  
Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The  
unit may fall, causing serious injury to a child or adult as well as serious  
damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or  
table recommended by the manufacturer.  
8A  
A unit and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the unit and cart combination  
to overturn.  
9 VENTILATION  
Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to  
protect it from overheating. These openings must not be blocked or covered. These openings must not be  
blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed  
near or over a radiator or heat radiator. This unit should not be placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been  
adhered to.  
10 POWER SOURCES  
This unit should be operated only from the type of power source indicated on the marking label. If you are  
not sure of the type of power supply to your home, consult your dealer or local power company. For units  
intended to operate from battery power, or other sources, refer to the operating instructions.  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
11 GROUNDING OR POLARIZATION  
This unit is equipped with a polarized alternating -current line plug (a plug having one blade wider than the other).  
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug  
fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete  
outlet.To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet  
unless the blades can be fully inserted without blade exposure. If you need an extension cord, use a polarized  
cord.  
2
12 POWER-CORD PROTECTION  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon  
or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they  
exit from the unit.  
Note to CATV system installer  
This reminder is provided to call the CATV system installers attention to Section 820-40 of the NEC which  
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to  
the grounding system of the building, as close to the point of cable entry as practical.  
13 Outdoor Antenna Grounding  
If an outside antenna or cable system is connected to the product, be  
sure the antenna or cable system is grounded so as to provide some  
EXAMPLE OF ANTENNA  
GROUNDING  
ANTENNA LEAD  
IN WIRE  
protection against voltage surges and built-up static charges. Section  
810 of the National Electrical Code, ANSI/NFPA No. 70-1984  
(Section 54 of Canadian Electrical Code, Part 1) provides information  
with respect to proper grounding of the mast and supporting  
GROUND CLAMP  
ANTENNA DISCHARGE UNIT  
(NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUND CLAMPS  
structure, grounding of the lead-in wire to an antenna-discharge unit,  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250 PART H)  
NEC - NATIONAL ELECTRICAL CODE  
connection to grounding electrodes, and requirements for the  
grounding electrode. See example as shown.  
14 Power Lines  
An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or  
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with  
them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna  
installer.  
15 LIGHTNING  
For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods  
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to  
the unit due to lightning and power line surges.  
16 DISC TRAY  
Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury.  
17 OVERLOADING  
Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock.  
18 OBJECT AND LIQUID ENTRY  
Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or  
short-outparts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.  
19 BURDEN  
Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and  
serious damage to the product.  
20 DISC  
Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal  
injury and product malfunction.  
21 SERVICING  
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
3
22 DAMAGE REQUIRING SERVICE  
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following  
conditions.  
A. When the power-supply cord or plug is damaged.  
B. If liquid has been spilled, or objects have fallen into the unit.  
C. If the unit has been exposed to rain or water.  
D. If the unit does not operate normally by following the operating instructions. Adjust only those  
controls that are covered by the operating instructions. Improper adjustment of other controls may  
result in damage and will often require extensive work by a qualified technician to restore the unit to  
its normal operation.  
E. If the unit has been dropped or the cabinet has been damaged.  
F. When the unit exhibits a distinct change in performance-this indicates a need for service.  
23 REPLACEMENT PARTS  
When replacement parts are required, have the service technician verify that the replacements he uses  
have the same safety characteristics as the original parts. Use of replacements specified by the unit  
manufacturer can prevent fire, electric shock, or other hazards.  
24 SAFETY CHECK  
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks  
recommended by the manufacturer to determine that the unit is in safe operating condition.  
25 WALL OR CEILING MOUNTING  
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.  
26 HEAT  
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
4
Read Carefully before Using  
Cautions in use of DVD-Video player are described below.  
Please read carefully before using a DVD-Video player.  
Installation place and handling  
- When you place this player near other devices, they may affect poorly together.  
- When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures  
or failure (tape is not ejected).  
- When you place this player near strong magnetic materials, it may affect image or voice poorly or damage  
recording.  
- Do not spill volatile liquids like insect spray over the player. Do not leave rubber or plastic products in contact  
with the player for a long time. They will cause deterioration or paint peel-off.  
Not in use  
- When the unit is not in use, be sure to remove the disc or tape and turn off the power.  
- If you do not use the unit for a long period, remove batteries in REMOTE to prevent leakage.  
- In case you dont use the unit for a long time, the unit may not function properly in the future. Turn on and  
use the player occasionally.  
Moving  
- Repack the unit as it was originally packed at the factory. Alternatively, pack this product with towel not to be  
damaged.  
- Eject any videotape.  
Cleaning  
- Dust off dirt in cabinet or control panel part smoothly with a soft cloth.  
- For heavy dirt, soak the cloth in a weak detergent solution, wring it well and wipe. Use a dry cloth to wipe it  
out.  
- Follow instructions in using chemical cleaners.  
- Do not use any type of solvent such as gasoline or benzene, as they may cause deterioration or paint peel-off.  
Checking  
- Video is a high precision device. To obtain a clear screen, we recommend regular inspection and  
maintenance every 1,000 hours of use by technical engineers.  
- For checking, contact your dealer or your nearest service center.  
Checking and Replacement of Antenna  
- Antenna is subject to change in its direction or damage by wind and rain. For clean screen, contact and  
consult your nearest service center about checking and replacement.  
In recording important screen  
- Be sure to record the screen and check whether recording is performed properly. We beg you to understand  
compensation of recording if recording is not performed by badness of used tape or video.  
Copyright  
- Do not use your recordings without permission of a copyrighter except personal usage.  
5
Tape and Disc Handling  
- Do not use any tape and disc below. Damage of video head or cut/coiling of tape may cause failure.  
Tape with mold  
Tape or disc stained with juice or attachments  
Tape having breakage connection  
Disassembled tape  
Disc with severe scratch  
Moisture condensation may occur in tape. Moisture condensation damages the tape. Please use the tape  
after the moisture condensation is disappeared.  
- After use, store tape vertically in a case to prevent loose.  
- Do not store the following places.  
High temperature and humidity  
Subject generation of mold  
Subject to direct sunlight  
Much dirt or dust  
Near strong magnetic materials such as speaker  
6
Contents  
Important Safeguards  
Read Carefully before Using  
Advantages of This Product Are....  
Idenificatuion of Controls  
front palel  
Other's Operation  
1
29  
29  
29  
30  
30  
30  
31  
31  
32  
33  
34  
34  
34  
34  
35  
35  
35  
35  
36  
37  
38  
40  
40  
41  
Using a zoom function  
Anglr  
5
8
To skip chapter in a DVD  
To Play It Fast  
9
9
rear panel  
To Play It Slow  
11  
12  
13  
14  
15  
16  
18  
18  
18  
19  
20  
20  
20  
21  
22  
22  
22  
23  
24  
24  
24  
25  
25  
25  
26  
26  
26  
27  
28  
28  
28  
remote Controller  
Repeating a Defined Period  
Confirming The Current Disc Mode  
To Display Menus In a Disc  
Repeating a Defined Period (DVD)  
About VCR  
instructions in using remote  
Connecting with TV  
Connecting with Cable box  
Connecting with other vcr or camcorder  
Language Setup Manu  
Select Manu Language  
Select Audio Language  
Select Subtitle Language  
Display setup Manu  
Set TV Display Mode  
Set TV Type  
Video Head Cleaning  
Erasure Protection  
What is Dew Condensation System  
About DVD  
Playable Disc  
Handling Disc  
Cleaning Disc  
Set Plcture Mode  
Terms related with DVD  
Before Doubting about troubles (DVD)  
Before Doubting about troubles (VCR)  
Specifications  
Audio setup Manu  
DigitalSETUP  
Dual mono (1+1) setup  
Dynamic Range compression setup  
Parental Lock Setup Manu  
Parent Lock Setup  
VCR Part  
DVD Part  
Change Password  
Others Setup Menu  
FM Transmitter  
Screen Saver  
VCR Setup Manu  
VCR OSD (One Screen Display)  
VCR Auto Play  
VCR Auto Repeat  
Operating TV Tuner  
TV Channel Set  
CATV Channel Set  
7
Advantages of This Product Are .....  
BUILT-IN TV TUNER (TV/CATV)  
Hi-Fi stereo system [VCR]  
Digital Auto Tracking [VCR]  
BACK LIGHTING OF FUNCTION BUTTONS  
EXTERNAL IR REMOTE CONTROLLER WITH RECEIVER  
DEW & HEAT SENSORS FOR TAPE PROTECTION  
AUTO START FUNCTION  
DC power Supply (2 kind of DC 12v inputs)  
DVD, VCD, CD, CD-R(MP3), CD-RW, VHS playback function  
Watching DVD for recording broadcast  
Integrated REMOTE (VCR, DVD)  
MP3 file playback function (CD-R disc having records of MP3 files)  
Various video type-supported ( NTSC and PAL)  
GUI (Graphical User Interface) OSD (On Screen Display)  
Screensaver function [DVD]  
Slow Forward / reverse (DVD) playback  
Fast Forward / reverse playback  
Various TV aspect (DVD)  
- 4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9 for Wide  
Repeat playback (title and chapter for DVD, track and disc for VCD/CD)  
Selective Play (DVD/VCD/CD)  
- You can select and play the desired title / chapter of DVD and track of Video CD/CD in STOP mode.  
Screen zoom function (DVD/VCD)  
Parental Lock function (DVD)  
- This function can prevent playback of software that may be unsuitable for children.  
Multi Angle function (DVD)  
- This function allows you to choose the viewing angle of scenes which were shot from a number  
of different angles. (The number of angles depends on the software.)  
Built-in Dolby Digital decoder (DVD)  
Multi Subtitle function (DVD)  
- The subtitle can be seen in up to 8 languages. In the case of SVCD or CVD, it depends on the disc. (The  
number of subtitle languages depends on the software.)  
Multi Audio function (DVD)  
- The audio soundtrack can be heard in up to 8 languages. In the case of SVCD or CVD,  
it depends on the disc.(The number of audio languages depends on the software.)  
Composite video out  
8
Identification of Controls  
Front Panel  
OPEN/CLOSE  
Open/Close button  
Audio/Video in jack  
Connect these jack to the audio/video out jacks  
terminal of your game machine or camcorder using  
the RCA cord provided.  
If this key is pressed while power is supplying .  
disc tray will open,the open/close button lamp will  
light up in red then insert the disc and  
the disc will be played automatically  
Remote control receiver.  
Playback/Pause button(DVD)  
Autorepeat lamp  
Playback disc press this button to pause a screen  
the pause lamp will blink in pause mode  
During auto repeat operation,  
auto repeat lamp will light up in red.  
Stop button(DVD)  
Use to stop playing  
HI-FI Lamp  
In the Hi-Fi out mode, the lamp will light up in red  
DEW/HEAT lamp  
Disc tray  
When power is on, tis indicator flashes red to  
indicate excessive moisture buildup inside the VCR.  
The unit will not operate unit it dries out sufficiently  
(the tape can be ejected from the unit)  
DVD Disc lamp  
VCD Disc lamp  
CD/MP3 Disc lamp  
When DEW mode has been activated,  
Fast forward button  
leave the unit on the allow it to dry out completely.  
/ the former track select button  
Press to select the former track or to  
playback rapidly when the disc is to playback  
rapidly, the fast forward button  
will light up in red  
REC key  
Press the REc key for at least one second to  
start recording.  
Fast forward/Cue key  
It this key is pressed in the Playback mode,  
the VCRenters the forward picture search mode.  
If pressed in stop mode,the the tape will fast  
forward at hig speed. The FF indicator lamp will  
up in red.  
Rewind button  
/ the next track select button  
Press to select the next track or to  
playback back rapidly when the disc is to playback  
back rapidly, the rewind button will light up in red  
9
Play key.  
Cassette-In Lamp.  
Press this key to playback a recorded tape,  
or to release special operation such as the search mode.  
In the playback mode the playback indicator lamp will  
be light in red, and Auto Tracking mode,  
this indicator lamp will blink.  
When the cassette is inserted,  
the CST-IN lamp will light up in green.  
Power Key  
When power is supplied to the set,  
the power indicator lamp will always light up in red.  
The Power ON and Power OFF mode will be toggled  
by pressing this key.  
When the POWER is switched on,  
the power lamp will light up in red the other keys will  
light up in green.  
Rewind / Review key.  
If this key is pressed in the PLAYBACK mode,  
the VCR enters the reverse picture search mode.  
If pressed in STOP mode,  
then the tape will rewind at high speed.  
The REW indicator lamp will up in red.  
Stop key.  
Press this button to stop tape.  
Cassette Compartment  
Eject Key.  
Press this button to eject tape.  
10  
Rear Panel  
ANT IN Connector.  
Connect the TV antenna  
(or cable if available- home use) to this  
connector.  
DC JACK IN (DC 12V)  
For car using, we recommend to use this connector  
with 3-wire system.  
* Connector description for 4  
RF OUT Connector.  
This connectors provides an interface  
ACC 12V  
to the antenna input connectors terminal of your  
television using a coaxial cable.  
Tuner the television to channel 3 or 4  
to watch video tapes.  
VEHICLE BATTERY 12V  
GND  
IR INPUT  
Connect this terminal to remote control out.  
DIGITAL OUT Connecter  
DC 12V IN JACK ( Round type)  
To enjoy sound quality of theater lev el in home,  
connect this jac k with amp or unit embedded with  
digital audio decoder  
To use this connector, below Convert-Adapter  
accessory should be locked into above connector 4.  
AUDIO IN (AV1)  
Connector this terminal to AUDIO OUT terminal of your  
Game machine, Camcorder, using the RCA cord  
For displaying this Rear A/V input connected, Input  
Signal should be set to "AV1" in Menu setting mode.  
( Convert-Adapter)  
S/W OUT Connector  
* Please note :  
Connect this terminal to VIDEO IN terminal of your TV  
, using the RCA cord .  
We highly recommend to connect the unit  
corresponding to the 3-wire system of 4.  
Thus, to make sure a proper working  
of power-off tape guide.  
DVD OUT Connector.  
Beyond it, the unit will automatically change  
to standby mode after turning off the vehicle in  
order to save the car battery.  
Connect this terminal to VIDEO IN terminal of your TV  
, using the RCA cord .  
VIDEO OUT Connector.  
Caution : Make use of AC/DC Adaptor  
( Ripple Voltage: Max 500mV)  
Connect this terminal to VIDEO IN terminal of your TV  
, using the RCA cord .  
11  
REMOTE CONTROLLER  
1
2
DVD & VCR Power On/Off  
46  
45  
REPEAT Playback button [DVD]  
MENU button  
3
4
5
6
TITLE MENU button  
MOVE in OSD button  
A/V SEL button  
POWER  
OPEN/CLOSE  
44  
1
ANGLE  
SUBTITLE  
ZOOM  
AUDIO  
REPEAT  
MENU  
7
8
OSD DISPLAY button  
RETURN button  
2
3
43  
REPEAT A-B  
TOP MENU  
42  
41  
9
CLEAR button  
10  
11  
PROGRAM button  
MUTE button  
4
5
ENTER  
40  
39  
12  
13  
14  
GOTO button  
PBC button  
A/V SEL.  
RETURN  
SETUP  
6
7
8
FF button  
DISPLAY  
15  
16  
F.SKIP button  
2
5
8
3
6
9
1
CH3/CH4 button [VCR]  
EJECT button [VCR]  
Auto Search button [VCR]  
FF button [VCR]  
CLEAR  
17  
18  
19  
20  
4
7
9
38  
PROGRAM  
10  
11  
MUTE  
GOTO  
0
SLOW  
STEP  
PBC  
STOP button [VCR]  
AUDIO button [VCR]  
REC button [VCR]  
REPLAY button [VCR]  
37  
12  
21  
22  
13  
36  
35  
34  
33  
REW  
PLAY/PAUSE  
STOP  
FF  
14  
R.SKIP  
F.SKIP  
23  
24  
15  
CH3/CH4  
EJECT  
32  
Tracking - (ManuallyaTracking in playback mode)  
/Channel - (in TV or CATV mode)button [VCR]  
16  
17  
VCR  
TV/VCR  
A. SEARCH  
25  
Tracking + (ManuallyaTracking in playback mode)  
/Channel + (in TV or CATV mode)button [VCR]  
31  
18  
REW  
PLAY  
STOP  
FF  
30  
29  
28  
19  
21  
22  
26  
27  
28  
RE-Tracking button [VCR]  
Encore button [VCR]  
Pause/Still button [VCR]  
Playback button [VCR]  
Rewind button [VCR]  
TV /VCR button [VCR]  
STOP button [DVD]  
AUDIO  
PAUSE/STILL  
ENCORE  
REPLAY  
20  
--- TRK ---  
REC  
R.TRK  
27  
+
-
--- CH ---  
29  
23  
30  
31  
32  
33  
34  
R.SKIP button [DVD]  
Play/Pause button [DVD]  
Rewind button [DVD]  
Step button [DVD]  
24  
26  
25  
35  
36  
37  
38  
42  
Slow button [DVD]  
Number button [DVD]  
Setup button [DVD]  
Enter button [DVD]  
Zoom button [DVD]  
Repeat A-B button [DVD]  
43  
Angle button [DVD]  
44  
39  
40  
Open/Close button [DVD]  
45  
Subtitle button [DVD]  
41  
46  
Audio button [DVD]  
12  
Instructions in Using REMOTE  
Operate REMOTE within 7m  
from the unit.  
Do not keep in the place with  
much dust and humidity  
Do not light up sending part of  
REMOTE  
Do not press 2(two) buttons at  
the same time.  
13  
Connecting with TV  
In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in  
CHANNEL SETscreen in VCR operation.  
In connecting RF cable to TV, set TV channel to CH3.  
How to Connect with RF cable  
REAR PANEL OF DVD-VIDEO  
REAR PANEL OF TV  
INPUT 1 INPUT 2  
OUTSIDE ANTENNA OR  
WALL ANTENNA OUTLET  
ANT IN  
RF CABLE  
1. Remove circular cable (RF cable) (surplus cable) plugged in ANT.INJack in rear panel of TV. Connect the  
cable to ANT.INjack in rear panel of DVD-Video.  
2. Connect TV to DVD-Video. Connect RF OUTjack in DVD-Video with ANT.INjack in TV with RF cable.  
REAR PANEL OF TV  
INPUT 1 INPUT 2  
ANT IN  
REAR PANEL OF DVD-VIDEO  
AUDIO/VIDEO CABLE  
3. (If there is AUDIO/VIDEO INPUT jack in TV)  
Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to  
AUDIO IN jack in TV with connecting cable of Audio/Video jack.  
Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound than  
connection with RF cable only.  
CHECK UP!  
VHF: 2 ~13 channels of TV  
UHF: 14~69 channels of TV  
CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and  
consumers. It does not need any antenna.  
In/Out jack in Audio/Video terminal:  
- In: A jack used to receive signal required in this unit from other units.  
- Out: A jack used to send signal of this unit to other units.  
Connect with Audio/Video terminal, you can enjoy more clear video and audio.  
(Use OUTPUT button in this REMOTE to select video mode.)  
14  
Connecting with Cable Box  
If your cable system only requires you to use a converter box for some channels  
(i.e., pay-TV channels), follow these steps: Find the primary incoming RF cable.  
Plug this cable into a splitter (available at your local electronics store.)  
Connect one RF cable between one OUT terminal on the splitter and the IN terminal on the converter box.  
Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal  
on an A/B switch available at your local electronics store.)Connect a third RF cable between  
the OUT terminal on the converter box and the B-IN terminal on the A/B switch.  
Connect a RF cable between the OUTterminalon the A/B switch and the ANT. IN on your DVD-VIDEO.  
When the A/B switch is in the B position,use the converter box to change channels ; when the A/B switch is  
in the A position, use the DVD-VIDEO to change channels.  
How to watch general broadcasting with recording CATV  
1. Set Channel Select switch of Converter Box to CH 3 or 4 as same as video  
exclusive channel. Press [SET] button in [VCR] operation to set video exclusive channel  
in CHANNEL SETscreen.  
2. Press channel button of Converter Box to select channel to be recorded. In this case,  
if you want to watch CATV to be recorded, press [TV/INPUT] button of TV to select Out(VCR).  
3. Press [REC] button in DVD-Video.  
4. To watch general broadcasting, press channel button in TV to select the desired channel.  
CHECK UP!  
For some types of TV, you should press [TV/INPUT] button in TV REMOTE and convert from Out 1  
( VCR 1) or Out 2(VCR 2) mode to Broadcasting Channel mode to change TV channel.  
Change channel selection of CATV receiver in recording, contents of recording is changed.  
15  
Connecting with Other VCR or Camcorder  
1. Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack  
in rear panel (or front panel) of DVD-Video with connecting cable.  
2. Connect ANT. INjack in TV to RF.OUTjack in DVD-Video with RF cable.  
3. To record contents of camcorder or playback video with DVD-Video, insert recording  
tape attached recording tab in DVD-Video.  
16  
How to Copy(Edit) Tape with Other VCR or Camcorder  
1. Turn on DVD-Video.  
2. Press [OUTPUT] button of remote control and adjust DVD-Video to display  
"External Input 1" or "External Input 2" in TV screen.  
3. Press [PLAY] button in Camcorder or playback video.  
4. Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video.  
5. Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.  
(Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button.  
Press [REC] button if you want to record again.  
How to Playback Chapter Photographed by Camcorder  
1. Turn DVD-Video on.  
2. Press [OUTPUT] button of remote control and adjust DVD-Video to display External Input 1”  
or External Input 2in TV screen.  
3. Insert tape in camcorder and playback it.  
17  
LANGUAGE SETUP MENU  
Select DISC Menu Language  
Select AUDIO Language  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
SETUPM MENU  
T
T
LANGUAGE SETUP  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
EXIT SETUP  
LANGUAGE SETUP  
LANGUAGE SETUP  
2. Press the select(ENTER) button  
2. Press the select(ENTER) button.  
then the LANGUAGE SETUP MENU is displayed.  
then the LANGUAGE SETUP menu is displayed.  
LANGUAGE SETUP MENU  
LANGUAGE SETUP MENU  
DISC MENU  
AUDIO  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
DISC MENU  
AUDIO  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
T
SUBTITLE  
T
SUBTITLE  
MAIN MENU  
MAIN MENU  
LANGUAGE SETUP  
LANGUAGE SETUP  
3. Press the SHIFT button to select(ENTER) the  
"AUDIO", then the AUDIO menu is displayed.  
3. Press the SHIFT  
button  
to enter the selected menu.  
LANGUAGE SETUP MENU  
DISC MENU  
LANGUAGE SETUP MENU  
DISC MENU  
AUDIO  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
AUDIO  
ENGLISH  
T
SUBTITLE  
T
SUBTITLE  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
MAIN MENU  
MAIN MENU  
LANGUAGE SETUP  
LANGUAGE SETUP  
4. Press the SHIFT  
button.  
4. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected. and Press the  
ENTER button to activate the selected.  
LANGUAGE SETUP MENU  
DISC MENU  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
AUDIO  
T
SUBTITLE  
italiano)  
( English  
francais  
deutsch  
espanol  
LANGUAGE SETUP MENU  
DISC MENU  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
MAIN MENU  
AUDIO  
LANGUAGE SETUP  
T
SUBTITLE  
5. Press the SHIFT ( or SHIFT ) button  
unit for the appropriate system is selected.  
and Press the ENTER button to activate the  
selected.  
MAIN MENU  
LANGUAGE SETUP  
( English  
francais  
deutsch  
espanol  
italiano)  
18  
Select SUBTITLE Language  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
LANGUAGE SETUP  
2. Press the select(ENTER) button  
then the "LANGUAGE SETUP" is displayed.  
LANGUAGE SETUP MENU  
DISC MENU  
AUDIO  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
T
SUBTITLE  
MAIN MENU  
LANGUAGE SETUP  
3. Press the SHIFT button to select (ENTER)  
the "SUBTITLE".  
Then the SUBTITLE menu is displayed.  
LANGUAGE SETUP MENU  
DISC MENU  
AUDIO  
T
SUBTITLE  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
OFF  
MAIN MENU  
LANGUAGE SETUP  
4. Press the SHIFT button  
to enter the selected menu.  
5. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected.  
and Press the ENTER button to activate the selected menu.  
( English francais deutsch espanol italiano OFF )  
LANGUAGE SETUP MENU  
DISC MENU  
AUDIO  
T
SUBTITLE  
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPANOL  
ITALIANO  
OFF  
MAIN MENU  
LANGUAGE SETUP  
19  
DISPLAY SETUP MENU  
Set TV TYPE  
Set TV DISPLAY Mode  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
SETUPM MENU  
T
T
T
T
LANGUAGE SETUP  
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
?
PARENTAL SETUP  
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
EXIT SETUP  
LANGUAGE SETUP  
LANGUAGE SETUP  
2. Press the SHIFT button to select (ENTER)  
the "DISPLAY SETUP".  
2. Press the SHIFT button to select (ENTER)  
the "DISPLAY SETUP".  
Then the DISPLAY SETUP menu is displayed.  
Then the DISPLAY SETUP menu is displayed.  
SETUPM MENU  
SETUPM MENU  
T
T
T
T
LANGUAGE SETUP  
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
?
PARENTAL SETUP  
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
EXIT SETUP  
GOTO DISPLAY SETUP MENU  
GOTO DISPLAY SETUP MENU  
3.Press the SHIFT button to select (ENTER)  
3. Press the SHIFT button to enter  
the "TV TYPE".  
the selected menu.  
DISPLAY SETUP MENU  
TV DISPLAY  
4. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected. and Press the  
ENTER button to activate the selected menu.  
MULTI  
NTSC  
PAL  
TV TYPE  
PIC MODE  
( 4:3 LETTER BOX 4:3 PAN-SCAN 16:9 WIDE )  
MAIN MENU  
DISPLAY SETUP MENU  
SET MULTISYNC MODE  
TV DISPLAY  
TV TYPE  
4:3 LETTER BOX  
4:3 PAN-SCAN  
16:9 WIDE  
PIC MODE  
4. Press the SHIFT button to enter  
the selected menu.  
MAIN MENU  
5. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected. and Press the  
ENTER button to activate the selected menu  
( MULTI NTSC PAL )  
SELECT 4:3 NORMAL TV L-BOX  
DISPLAY SETUP MENU  
TV DISPLAY  
MULTI  
NTSC  
PAL  
TV TYPE  
PIC MODE  
MAIN MENU  
SELECT NTSC TV  
20  
Set Picture Mode  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
LANGUAGE SETUP  
2. Press the SHIFT button to select (ENTER)  
the "DISPLAY SETUP".  
Then the DISPLAY SETUP menu is displayed.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
GOTO DISPLAY SETUP MENU  
3. Press the SHIFT button to select (ENTER)  
the "PIC MODE".  
DISPLAY SETUP MENU  
TV DISPLAY  
TV TYPE  
PIC MODE  
AUTO  
HI-RES  
N-FLICKER  
MAIN MENU  
SET PICTURE MODE  
4. Press the SHIFT button  
to enter the selected menu.  
5. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected. and Press the  
ENTER button to activate the selected menu.  
( AUTO HI-RES N-FLICKER )  
DISPLAY SETUP MENU  
TV DISPLAY  
TV TYPE  
PIC MODE  
AUTO  
HI-RES  
N-FLICKER  
MAIN MENU  
SELECT HIGH-RESOLUTION MODE  
21  
AUDIO SETUP MENU  
DIGITAL OUT Setup  
DUAL MONO (1+1) Setup  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
SETUPM MENU  
T
T
T
LANGUAGE SETUP  
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
EXIT SETUP  
LANGUAGE SETUP  
LANGUAGE SETUP  
2. Press the SHIFT button to select (ENTER)  
the "AUDIO SETUP".  
Then the AUDIO SETUP menu is displayed.  
2. Press the SHIFT button to select (ENTER)  
the "AUDIO SETUP".  
Then the AUDIO SETUP menu is displayed.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
SETUPM MENU  
DISPLAY SETUP  
AUDIO SETUP  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
GOTO DISPLAY SETUP MENU  
EXIT SETUP  
GOTO DISPLAY SETUP MENU  
3. Press the SHIFT button to enter the selected  
menu.  
3. Press the SHIFT button to select (ENTER)  
the "AC3 DUAL MONO".  
4. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected.  
and Press the ENTER button to activate the  
selected menu.  
AUDIO SET MENU  
DIGITAL OUT  
STEREO  
L-MONO  
R-MONO  
MIX-MONO  
AC3 DUAL MONO  
AC3 DYNAMIC  
( DISABLE BITSTREAM PCM )  
AUDIO SET MENU  
MAIN MENU  
DIGITAL OUT  
DISABLE  
BITSTREAM  
PCM  
DUAL MONO (1+1) SETUP  
AC3 DUAL MONO  
AC3 DYNAMIC  
4. Press the SHIFT button to enter the  
selected menu.  
MAIN MENU  
5. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected. and Press the  
ENTER button to activate the selected menu.  
( STEREO L-MONO R-MONO MIX-MONO)  
SELECT DIGITAL OUT DISABLE  
AUDIO SET MENU  
DIGITAL OUT  
STEREO  
L-MONO  
R-MONO  
MIX-MONO  
AC3 DUAL MONO  
AC3 DYNAMIC  
MAIN MENU  
SELECT STEREO MODE  
22  
Setup DYNAMIC Range Compression  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
LANGUAGE SETUP  
2. Press the SHIFT button to select (ENTER)  
the "AUDIO SETUP".  
Then the AUDIO SETUP menu is displayed.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
GOTO DISPLAY SETUP MENU  
3. Press the SHIFT button to select (ENTER)  
the "AC3 DYNAMIC".  
AUDIO SET MENU  
FLL  
DIGITAL OUT  
AC3 DUAL MONO  
6/8  
AC3 DYNAMIC  
4/8  
2/8  
MAIN MENU  
OFF  
DYNAMIC RENGE COMPRESSION  
4. Press the SHIFT button to enter the  
selected menu  
5. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected. and Press the  
ENTER button to activate the selected menu.  
AUDIO SET MENU  
FLL  
DIGITAL OUT  
AC3 DUAL MONO  
6/8  
AC3 DYNAMIC  
4/8  
2/8  
MAIN MENU  
OFF  
DYNAMIC RNG COMPRESSION 1/4  
23  
PARENTAL LOCK SETUP MENU  
Change the Password  
Setup Parental Lock  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
T
T
SETUPM MENU  
LANGUAGE SETUP  
T
T
DISPLAY SETUP  
AUDIO SETUP  
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
?
OTHERS SETUP  
VCR SETUP  
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
EXIT SETUP  
LANGUAGE SETUP  
LANGUAGE SETUP  
2. Press the SHIFT button to select (ENTER)  
the "PARENTAL LOCK".  
Then the PARENTAL LOCK menu is displayed.  
2. Press the SHIFT button to select (ENTER)  
the "PARENTAL LOCK".  
SETUPM MENU  
Then the PARENTAL LOCK menu is displayed.  
T
T
LANGUAGE SETUP  
SETUPM MENU  
DISPLAY SETUP  
AUDIO SETUP  
T
T
LANGUAGE SETUP  
?
DISPLAY SETUP  
AUDIO SETUP  
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
GOTO DISPLAY LOCK MENU  
EXIT SETUP  
GOTO DISPLAY LOCK MENU  
3. Press the SHIFT button to select (ENTER)  
the "PASSWORD".  
PARENTAL LOCK MENU  
3. Press the SHIFT button to enter  
PARENTAL  
1 KID SAFE  
2 G  
?
the selected menu  
PASSWORD  
3 PG  
4. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected.  
4 PG 13  
5 PG-R  
6 R  
( KID SAFE G PG PG 13 PG -R →  
R NC-17 ADULT )  
7 NC-17  
8 ADULT  
MAIN MENU  
SET TO KIDS SAFE  
Then the PARENTAL VERIFY PAGE menu is displayed.  
4. Press the SHIFT button to enter the  
PARENTAL LOCK MENU  
selected menu.  
PARENTAL  
1 KID SAFE  
2 G  
?
PASSWORD  
PARENTAL LOCK MENU  
3 PG  
PARENTAL  
?
4 PG 13  
5 PG-R  
6 R  
PASSWORD  
CHANGE  
7 NC-17  
8 ADULT  
MAIN MENU  
SET TO KIDS SAFE  
MAIN MENU  
CHANGE PASSWORD  
5. If selecting PARENTALby moving, a password  
display appears.  
Then entering a users password, a user canresettle  
a users PARENTAL.  
5. If selecting CHANGEby moving,  
a password display appears.  
Then entering a users password,  
a user canresettle a users password.  
PASSWORD VERIFY PAGE  
INPUT PASSWORD :  
PASSWORD CHANGE PAGE  
OLD PASSWORD :  
NEW PASSWORD :  
CONFIRM PWD :  
PLEASE ENTER PASSWORD  
PLEASE ENTER OLD PASSWORD  
24  
OTHERS SETUP MENU  
Screen Saver  
Setup the FM Transmitter  
Option Function  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
SETUPM MENU  
T
T
LANGUAGE SETUP  
?
PARENTAL SETUP  
DISPLAY SETUP  
AUDIO SETUP  
OTHERS SETUP  
VCR SETUP  
?
PARENTAL SETUP  
EXIT SETUP  
OTHERS SETUP  
VCR SETUP  
LANGUAGE SETUP  
EXIT SETUP  
2. Press the SHIFT button to select (ENTER)  
the "OTHERS SETUP".  
LANGUAGE SETUP  
Then the OTHERS SETUP menu is displayed.  
OTHERS LOCK MENU  
2. Press the SHIFT button to select (ENTER)  
the "OTHERS SETUP".  
Then the OTHERS SETUP menu is displayed.  
FM TRANSMITTER  
SCR SAVER  
88.1 MHz  
88.3 MHz  
88.5 MHz  
88.7 MHz  
88.9 MHz  
89.1 MHz  
89.3 MHz  
89.5 MHz  
89.7 MHz  
89.9 MHz  
off  
OTHERS LOCK MENU  
FM TRANSMITTER  
SCR SAVER  
88.1 MHz  
88.3 MHz  
88.5 MHz  
88.7 MHz  
88.9 MHz  
89.1 MHz  
89.3 MHz  
89.5 MHz  
89.7 MHz  
89.9 MHz  
off  
MAIN MENU  
OTHERS SETUP  
3. Press the SHIFT button select (ENTER)  
the "SCR SAVER".  
Then the SCREEN SAVER menu is displayed.  
MAIN MENU  
OTHERS SETUP  
OTHERS LOCK MENU  
FM TRANSMITTER  
ON  
3. Press the SHIFT button to enter the  
selected menu.  
SCR SAVER  
OFF  
4. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected. and Press the  
ENTER button to activate the selected menu.  
( 88.1MHz 88.3MHz 88.5MHz 88.7MHz→  
88.9MHz 89.1MHz 89.3MHz 89.5MHz  
89.7MHz 89.9MHz off )  
MAIN MENU  
SELECT SCREEN SAVER ON  
4. Press the SHIFT button to enter the  
selected menu.  
5. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected. and Press the  
ENTER button to activate the selected menu.  
( "ON" or "OFF")  
OTHERS LOCK MENU  
FM TRANSMITTER  
SCR SAVER  
88.1 MHz  
88.3 MHz  
88.5 MHz  
88.7 MHz  
88.9 MHz  
89.1 MHz  
89.3 MHz  
89.5 MHz  
89.7 MHz  
89.9 MHz  
off  
OTHERS LOCK MENU  
FM TRANSMITTER  
ON  
SCR SAVER  
OFF  
MAIN MENU  
OTHERS SETUP  
MAIN MENU  
SELECT SCREEN SAVER ON  
25  
VCR SETUP MENU  
VCR Auto PLAY  
VCR OSD (On Screen Display)  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
SETUPM MENU  
DISPLAY SETUP  
AUDIO SETUP  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
LANGUAGE SETUP  
EXIT SETUP  
LANGUAGE SETUP  
2. Press the SHIFT button to select the  
"VCR SETUP",  
2. Press the SHIFT button to select(ENTER) the  
"VCR SETUP",  
then the VCR SETUP menu is displayed.  
then the VCR SETUP menu is displayed.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
VCR SETUP  
DISPLAY SETUP  
AUDIO SETUP  
OSD  
ON  
AUTO PLAY  
AUTO REPEAT  
OFF  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
MAIN MENU  
EXIT SETUP  
GOTO VCR SETUP MENU  
VCR SETUP  
3. Press the SHIFT button to select the  
"AUTO PLAY", then the AUTO PLAY menu is  
displayed.  
3. Press the SHIFT button to enter the  
selected menu.  
VCR SETUP  
OSD  
ON  
AUTO PLAY  
AUTO REPEAT  
OFF  
4. Press select ENTER button unit for the  
appropriate system is selected.  
and Press the ENTER button to activate the  
selected menu.  
MAIN MENU  
( "ON" or "OFF")  
VCR SETUP  
VCR SETUP  
OSD  
ON  
4. Press the SHIFT button to enter the  
AUTO PLAY  
AUTO REPEAT  
OFF  
selected menu.  
5. Press select ENTER button unit for the  
appropriate system is selected.and Press the  
ENTER button to activate the  
selected menu.  
MAIN MENU  
SELECT VCR OSD ON  
( "ON" or "OFF")  
VCR SETUP  
OSD  
ON  
AUTO PLAY  
OFF  
AUTO REPEAT  
MAIN MENU  
VCR OSD  
26  
VCR Auto Repeat  
1. Press the "SETUP" button on the remote control.  
The initial MENU is displayd.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
LANGUAGE SETUP  
2. Press the SHIFT button to select(ENTER) the  
"VCR SETUP",  
then the VCR SETUP menu is displayed.  
SETUPM MENU  
T
T
LANGUAGE SETUP  
DISPLAY SETUP  
AUDIO SETUP  
?
PARENTAL SETUP  
OTHERS SETUP  
VCR SETUP  
EXIT SETUP  
GOTO VCR SETUP MENU  
3. Press the SHIFT button to select(ENTER) the  
"AUTO REPEAT",  
then the AUTO PLAY menu is displayed.  
VCR SETUP  
OSD  
ON  
AUTO PLAY  
AUTO REPEAT  
OFF  
MAIN MENU  
VCR OSD  
4. Press the SHIFT button to enter the  
selected menu.  
5. Press the SHIFT ( or SHIFT ) button unit for the  
appropriate system is selected. and Press the  
ENTER button to activate the selected menu.  
( "ON" or "OFF")  
VCR SETUP  
OSD  
AUTO PLAY  
AUTO REPEAT  
ON  
OFF  
MAIN MENU  
SELECT VCR AUTO REPEAT OFF  
27  
(Option Function)  
OPERATING TV TUNER  
TV CHANNEL SET  
NOTE : If RF-Sigmal is not input, searching channel will be displayed blue-back picture.  
2. Press A.SEARCH button on the remote control,  
then channels will be found and stored automatically.  
1. Press "A/V SEL." button on the remote control,  
until " TV" is selected.  
While the "AUTO SEARCHING" is progressing,  
channels will be changed up to 69.  
(DVD TV CATV AV1 AV2)  
TV 02  
TV CHANNEL SET  
CH **  
AUTO  
SEARCHING...............  
3. When searching and storing is completed,  
the TV mode will be displayed.  
NOTE:  
While searching and storing channels, no button will be operated.  
When "AUTO REPAT" function is "OFF" and VCR is "STOP" mode, this function will be operated.  
CATV CHANNEL SET  
NOTE : If RF-Sigmal is not input, searching channel will be displayed blue-back picture.  
1. Press "A/V SEL." button on the remote control,  
until " CATV" is selected.  
2. Press A.SEARCH button on the remote control,  
then channels will be found and stored automatically.  
While the "AUTO SEARCHING" is progressing,  
channels will be changed up to 125.  
(DVD TV CATV AV1 AV2)  
CATV CHANNEL SET  
CH **  
CATV 01  
AUTO  
SEARCHING...............  
3. When searching and storing is completed,  
the CATV mode will be displayed.  
NOTE:  
While searching and storing channels, no button will be operated.  
When "AUTO REPAT" function is "OFF" and VCR is "STOP" mode, this function will be operated.  
28  
Other's Operation  
Using a zoom function  
A user can enlarge the current screen about 2,4 or 8 times.  
Keep pressing [ZOOM] button till the preferred zoom appears.  
Every time a user presses [ZOOM] button,  
a zoom magnification changes 2 times ( X2 ) 4 times ( X4 ) 8 times ( X8 )  
OFF 2 times ( X2 ) ... one by one.  
A base point to be enlarged is center and the point can be changed with  
the operation of [, , , ] button.  
ZOOM X2  
POWER  
OPEN/CLOSE  
ANGLE  
SUBTITLE  
ZOOM  
AUDIO  
REPEAT  
MENU  
REPEAT A-B  
TOP MENU  
Zoom button  
ENTER  
When TV ASPECTitem is set to 4:3 PSin setup screen, or with certain discs,  
2 times Zoom may not function properly.  
Playable Disc : DVD,VCD  
Angle  
If a disc includes multi angle information, a user can watch a screen in multi angles,  
The function is limited to a DVD disc supporting multi angle information.  
Keep pressing [ANGLE] button till the preferred angle appears.  
Every time a user presses [ANGLE] button, an angle changes in a consecutive order.  
POWER  
OPEN/CLOSE  
TV 02  
ANGLE  
SUBTITLE  
ZOOM  
AUDIO  
REPEAT  
MENU  
ANGLE button  
REPEAT A-B  
TOP MENU  
ENTER  
Playable Disc : DVD  
29  
To skip chapter in a DVD  
1. Press POWER button to power on.  
SLOW  
GOTO  
STEP  
PBC  
2. Press [OPEN/CLOSE] button to open the disc tray.  
REW  
PLAY/PAUSE  
FF  
R.SKIP  
STOP  
F.SKIP  
3. Insert the disc and press [OPEN/CLOSE] button to close the tray.  
4. To playback it, press [PLAY/PAUSE] button.  
CH3/CH4  
EJECT  
VCR  
TV/VCR  
A. SEARCH  
REW  
PLAY  
STOP  
FF  
PAUSE/STILL  
ENCORE  
REPLAY  
AUDIO  
5. To move to next chapter, press F.SKIP(  
The current chapter moves to the next chapter.  
) button.  
--- TRK ---  
R.TRK  
REC  
+
-
--- CH ---  
6. Press R.SKIP(  
) button.  
7. Also you can return to normal speed by pressing (  
) button.  
Playable Disc : DVD  
To play it fast  
1. Press FF (  
) button to start fast-play in playing.  
FF,REW Button  
If Every time you press the button, play speed changes like the below orders  
DVD : x 2 FF x 4 FF x 8 FF x 16 FF x 32 FF x 64 FF PLAY x 2 FF ....  
VCD : x 2 FF x 3 FF x 4 FF x 5 FF PLAYx 2 FF....  
SLOW  
GOTO  
STEP  
PBC  
REW  
PLAY/PAUSE  
FF  
MP3 : x 2 FF x 4 FF x 6FF x 8 FF PLAYx 2 FF....  
R.SKIP  
STOP  
F.SKIP  
Also you can return to normal speed by pressing play/pause (  
) button.  
CH3/CH4  
EJECT  
VCR  
TV/VCR  
A. SEARCH  
REW  
PLAY  
STOP  
FF  
PAUSE/STILL  
ENCORE  
REPLAY  
AUDIO  
2. Press REW (  
) button to start reverse fast-play in playing.  
--- TRK ---  
R.TRK  
REC  
+
-
--- CH ---  
If Every time you press the button, play speed changes like the below orders  
DVD : x 2 FR x 4 FR x 8 FR x 16 FR x 32 FR x 64 FR PLAY x 2 FR ....  
DVR : x 2 FR x 3 FR x 4 FR x 5 FR PLAY x 2 FR ....  
MP3 : x 2 FR x 4 FR x 6 FR x 8 FR PLAY x 2 FR....  
Also you can return to normal speed by pressing (  
) button.  
Playable Disc : DVD,VCD  
To play it slow  
Slow Button  
1. Press the SLOW button to play it slowly in PLAYBACK.  
Every time you press the button, play speed changes like the below orders  
VCD : x 1 SF x 2 SF x 3 SF STEP BWD x 1 SF.....  
SLOW  
GOTO  
STEP  
PBC  
REW  
PLAY/PAUSE  
FF  
R.SKIP  
STOP  
F.SKIP  
DVD : x 2 SF x 4 SF x 8 SFx 2 SRx 4 SR x 8 PLAY x 2 SF.....  
CH3/CH4  
EJECT  
VCR  
TV/VCR  
A. SEARCH  
Also you can return to normal speed by pressing PLAY/PAUSE (  
*For the case of SVCD or VCD, Slow playback is available.  
) button.  
REW  
PLAY  
STOP  
FF  
PAUSE/STILL  
ENCORE  
REPLAY  
AUDIO  
--- TRK ---  
R.TRK  
REC  
+
-
--- CH ---  
Playable Disc : DVD,DVD  
30  
Repeating a defined period  
You may repeat a desired chapter or track.  
1. Keep pressing REPEAT button till the preferred system appears.  
DVD : Chapter Repeat on Title Repeat on Repeat off Chapter Repeat on  
VCD : REP-ONE REP-ALL REP OFF REP-ONE  
MP3(CD) : REP-ONE Folder Rep Folder REP-ONE  
Also you can return to normal speed by pressing PLAY/PAUSE (  
) button.  
Chapter Repet on  
POWER  
OPEN/CLOSE  
ANGLE  
SUBTITLE  
ZOOM  
AUDIO  
REPEAT  
MENU  
REPEAT button  
REPEAT A-B  
TOP MENU  
ENTER  
A certain disc may not be repeated.  
Playable Disc : VCD,DVD,MP3(CD)  
confirming the current disc mode  
While in playing, Keep pressing "DISPLAY" button till  
the preferred system appears.  
Display button  
ENTER  
Playable Disc : DVD  
A/V SEL.  
RETURN  
SETUP  
DISPLAY  
2
5
3
6
9
1
CLEAR  
4
7
TITEL 00/00 CHAPTER 000/000  
00 : 00: 00  
TITEL REMAIN  
00 : 00: 00  
PROGRAM  
8
0
MUTE  
CHAPTER REMAIN  
00 : 00: 00  
CHAPTER ELAPSED  
00 : 00: 00  
TITEL 00/00 CHAPTER 000/000  
00 : 00: 00  
Playable Disc : VCD  
SINGLE ELAPSEO  
00 : 00: 00  
TOTAL ELAPSED  
SINGLE RENAIN  
00 : 00: 00  
00 : 00: 00  
SINGLE ELAPSEO  
00 : 00: 00  
OFF  
TOTAL REMAIN  
00 : 00: 00  
00 : 00: 00  
31  
To display menus in a disc  
If a disc includes menus, a user may use them.  
1. Press "MENU" button.  
It shows menus in the disc. Also they are different according to discs.  
Move a cursor to a relative item with "MOVE IN OSD" buttons of , , , ▲  
button and select one with "ENTER" button or "PLAY" button.  
POWER  
OPEN/CLOSE  
ANGLE  
SUBTITLE  
ZOOM  
AUDIO  
REPEAT  
MENU  
REPEAT A-B  
TOP MENU  
MOVE IN OSD button  
Playable Disc : DVD  
ENTER button  
ENTER  
2. Press "PBC" button.  
Every time pressing "PBC" button, PBC function turns ON and OFF over and over.  
Menu screen only appears when selecting PBC ON.  
Select a number of menu screen and press "ENTER" button.  
If you watch a movie without menu screen, select PBC OFFmode by pressing "PBC" button.  
ENTER  
A/V SEL.  
RETURN  
SETUP  
DISPLAY  
2
5
8
3
6
9
1
CLEAR  
number button  
4
7
PROGRAM  
MUTE  
GOTO  
0
SLOW  
PBC button  
STEP  
PBC  
REW  
PLAY/PAUSE  
STOP  
FF  
R.SKIP  
F.SKIP  
Playable Disc : VCD 2.0  
CD and VCD1.1 do not support the function.  
32  
Repeating a defined period (DVD)  
You may repeat a desired chapter or track.  
1 Select A-B Repeat Function  
In Play mode, press the REPEAT button, then press left/right to select A-B Repeat.  
o "A-" will highlight when A-B Repeat is selected.  
NOTE: If you are playing a CD, the menu will display "Track" in place of "Chapter"  
2 Mark the Starting Point  
Press the ENTER button at the beginning of the segment you want to repeat (Point A).  
o "B" will highlight after Point A is selected.  
NOTE: The minimum AB Repeat time is 5 seconds.  
3 Mark the Ending Point  
Press the ENTER button again at the end of the segment you want to repeat (Point B).  
o The segment will begin repeating in a continuous loop.  
4 Cancel A-B Repeat  
Press the REPEAT button to open the Repeat Menu,  
press left/right to highlight "Off," then press the ENTER button.  
A TO B SET A  
A TO B SET B  
A TO B CANCELLED  
33  
About VCR  
VIDEO HEAD CLEANING  
The video heads enable the VCR to read video information pictures from the tape during playback.  
In the unlikely event that the heads become clogged with dirt video playback will be impossible.  
This can easily be determined during playback of a known good tape, there is good sound, but the  
picture is extremely snowy.  
If this si the case, have the video cassette recorder checked by qualified service personnel.  
NOTES  
During normal operation of the VCR, the video and audio heads can accumulate dirt over a period  
of time, especially when using an old or poor quality tape. When the heads are dirty, the picture  
can get snowy and the tracking control will have little or no effect.  
If this condition occurs, head cleaning cartridges may take care of the problem and restore normal  
picture.  
We recommend that head cleaning cartridges be used sparingly since they are very abrasive and  
can damage the video heads during prolonged use.  
If the problem is not resolved with the head cleaning cartridge then the unit needs to be checked  
by a qualified service personnel.  
ERASURE PROTECTION  
Video cassettes are equipped with a safety tab to prevent accidental erasure.  
When the tab is removed, recording can not be performed.  
TO PREVENT ACCIDENTAL ERASURE  
TO RECORD AGAIN  
-After recording, break off the safety tab  
with a screwdriver if you don't want to  
record over the tape.  
- Cover the hold with cellophane tape.  
What is dew condensation symptom?  
If a VCR is moved from a cool place to a warm and damp place or a  
place facing a direct cool wind from air-conditioner...and others,  
temperature varies sharply, which makes dew on head drums of VCR.  
If dew condensation occurs,  
1 First, turn it on for one or two hours before using it.  
2 Do not use it because it may develop troubles of a VCR or videotape.  
34  
About DVD  
Playable Disc  
DVD,Video CD (Version 1.1,2.0),S-VCD and Audio CD  
Disc type  
DVD  
Playable  
Possible  
Restriction  
Region number 1 or Region number All  
Possible  
Version 1.0/1.1/2.0, SVCD/CVD  
PCM or dts  
Video CD  
CD  
Possible  
Possible  
Possible  
Possible  
CD-R  
Video-CD/CD/CD-ROM (MP3 File)  
CD-RW  
DVD-R  
S-VCD  
Video-CD/CD/CD-ROM (MP3 File)  
DVD Video  
SUPER Video CD  
Possible  
REGION MANAGEMENT INFORMATION  
This unit is designed and manufactured to respond to  
the Region Management information that is recorded on a DVD disc.  
The region number of this player is 1.  
If the region number described on the DVD discs  
1
(Region 1)  
does not correspond to the Region number of this player, the player will not play this disc.  
This player will play DVD discs made for ALLregions.  
Therefore, this player will play DVD discs marked with labels  
containing the region number 1or ALL.  
ALL  
(Region ALL)  
Handling Disc  
- To keep a disc clean condition, please do not touch a side containing play information.  
- Do not attach a bit of paper or sticky tape on it.  
- Do not expose a disc to a direct sunlight or electric heating systems.  
- After using it, please keep a disc in a case.  
Cleaning Disc  
- Before using it, please rub it from center toward outside with clean clothes.  
- Do not use any type of solvent such as thinner, benzol (benzene), commercial  
cleaning goods or antistatic sprays.  
35  
Terms related with DVD  
DVD  
A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include  
135 minutes of video information. And for audio, it can hold up to 8 kinds of languages  
and 32 kinds of subtitle languages.  
By using MPEG-2 video compression and digital 3D surround sound,  
DVD realizes highdefined screen and quality sound like a movie theater.  
CDDA  
A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.  
MP3  
PBC  
Audio compression format that enables audio files to be stored and transferred on a computer  
with a relatively small file size. It enables you to enjoy CD quality music. (Short for MPEG-1 Layer 3)  
This is recorded on a Video CD 2.0, Video CD 3.0, SVCD and CVD.  
The scenes or information to be viewed (or listened to) can be selected interactively with  
the TV monitor by looking at the menu  
shown on the TV monitor. It stands for PlayBack Control.  
CHAPTER  
It means the information recorded in a DVD. A title in a DVD is divided into many tracks,  
of which a track is called as a chapter.  
A certain scene of a screen can be quickly searched with the chapter number.  
TITLE  
It means the information recorded in a DVD. A DVD can be divided into may titles.  
TRACK It means the information recorded in a video CD and audio CD.  
A disc consists of many a track, for which a user can search a certain position.  
Angle  
Some DVD discs contain the various scenes that have been simultaneously shot from a number of  
different angles.  
S-VIDEO  
The S-VIDEO output separates the color (C) and luminance (Y) signals before transmitting them to the  
TV set in order to achieve a sharper picture. So this must be selected from the menu to enable the SVIDEO  
output to function.  
36  
Before doubting about troubles (DVD)  
Symptom  
Checks  
- a If a DVD is from overseas, it may not be played. Please check a  
DVDs region code whether it has the relative region code 1 or All.  
- a Please check whether a DVD is inserted in a right direction.  
- a If it is a CD-ROM for PC or DVD-ROM, it does not work.  
The recorder does not play.  
No sound comes through.  
- a Play mode may be SLOWor PAUSE(In abnormal speed  
play, no sound comes through)  
- a Did you connect the parts in right way?  
- a Please check the operative condition of TV or amplifier.  
- a From SETUP, please check AUDIOitems.  
- a Did you turn on your TV sets?  
A disc is playing but screen does  
not appear or poor screen appears.  
- a Did you connect the parts in right way?  
- a The play may be in PAUSE.  
- a A disc may have some contaminants or be damaged.  
- a A disc may be bad one.  
- a Please check the connection with Dolby Digital amplifier.  
- a Please check the plugs are connected with one another tightly.  
- a Some contaminants may be remained in connection terminal.  
Sound is irregular  
- a Please check the degree of remote control, distance or any  
interruption.  
REMOTE does not work.  
- a Battery may be weak or exhausted.  
- a When you operate DVD, use it by pressing [DVD] button.  
AUDIOor SUBTITLEbutton  
does not work.  
- a If a DVD does not include language information, it does not  
support the function.  
- ANGLEis supported only in a DVD contains multi angle  
scenes. Also a user can confirm the support with the ANGLE”  
mark on screen.  
ANGLEbutton does not work  
while a DVD is playing.  
- a Please check the degree of remote control, distance or any  
MENUdoes not appear while a  
DVD is playing.  
interruption.  
- a Please check a battery in remote control whether it is exhausted  
or not.  
- a A DVD may not contain menu information.  
- a The recorder may not coincide with your TV system. Please  
press SYSTEMto match to NTSC system.  
Screen shakes or appears only in  
black and white. (or Subtitle  
shakes)  
- a A disc may have some contaminants or be damaged.  
- a If you playback a DVD disc of PAL system whose region code is  
ALL, the playback screen may shake.  
37  
Before doubting about troubles (VCR)  
Symptom  
Checks  
- a Please check whether a power plug is inserted in an electric outlet.  
- The Polarity of power cord is not correct.  
Power Ondoes not work.  
- Please check whether a videotape is inserted in.  
- a Try to insert a plug again.  
It does not work even in Power  
On.  
- Check circuit fuse at source of power.  
(see vehicle/converter manual.)  
- a Please check whether a power plug is inserted in an electric outlet.  
- a Please check whether a videotape is in.  
A videotape is not inputted in.  
- a Please check whether a videotape is inserted in a right direction  
(a side of transparent window should be on the upside)  
- a Have you inputted a videotape again just after the tape was  
ejected? Please try it again after fully ejecting it.  
- a When a videotape forces to be ejected, the tape may not be  
inputted. In the case, please pull out an outlet, and then push the  
tape smoothly.  
- Thats why a safe mode to protect a videotape is operated  
On inputting a videotape,  
the tape is re-ejected.  
automatically. Please pull out the tape and input it again.  
- In case the product is used for a long time, a videotape may not be  
ejected for a film inside may be stretched. In the case, please pull  
out a power plug for about 10mins and then press EJECTbutton.  
A videotape is not ejected.  
- a Please check your antennas connection.  
A channel on video and a play  
screen does not appear.  
- a TV channel should be fixed on video channel (3 or 4).  
- a Please check your antennas signal whether it may be weak.  
In case of its weakness, please use a frequency amplifier connected  
with the device.  
- a While in no use of VCR, was it turned on?  
Noise (screen noise) appears on  
screen.  
- a While in recording a program, do you watch another channel?  
While in playing, noise appears.  
- Please press TRACKINGfor better screen. Videotape may be  
poor. Try to change it to another one.  
Sound and screen are irregular.  
- a Please use a head-cleaner to clean VCR heads. VCR heads may  
be contaminated.  
Sound comes out but screen does  
not appear.  
Screen is irregular and stripes appears.  
"Screen Error" message is displayed  
in a screen.  
38  
Symptom  
Checks  
While recording and playing, the  
top of screen extremely waves.  
- a Since VCR Play signals are not stable like a TV signals, screen  
- a In case videotape is the one recorded by other products or old  
one, stripe may appear on the screen.  
A screen is not clear.  
- a Try to adjust the screen by [TRACKING+/-] button  
- a Try to use a head-cleaner.  
- Try to use a head-cleaner.  
- a Try to adjust the screen  
A screen at pause is trembling or  
slow screen is not clear.  
- a For recording, you should use videotape with a tab.  
- a Please check whether a channel is fixed on video. If not, you  
have to turn it into TVby pressing OUTPUTbutton.  
- a Are RF cables inputted antenna connection terminal correctly?  
- a Does a CH number selected in display section appear?  
- a Please check a tab on a tape whether it is broken or not. (If it was  
broken, please scotch-tape it)  
Recording a TV program is  
impossible.  
- a Check whether a tape attached with a recording tap is inserted.  
- a Check whether the screen is displayed in VCR Only Channel.  
Press [OUTPUT] button in this remote controller to adjust in  
"General Broadcast" condition.  
- a Is the rounded line (RF cable) connected in "ANT.IN" terminal?  
- a Is the selected channel number shown in Display?  
- a Is a tab of cassette tape broken? (Please cover a tab hole with  
cellophane adhesive tape (Scotch tape).)  
- a You may not memorize channels.  
In spite of pressing CHANNEL,  
- a Please check your channel setting or press a number button.  
a channel can not be set.  
- a Some tapes or discs distributed in the market for lending is set to  
prevent copy in manufacturing. These tapes cannot be  
duplicated in a good condition.  
While duplicating, screen is not  
clean and distorted.  
remote control does not work.  
- a Battery may be weak or exhausted.  
- a A receiver of remote control may be different with a sender.  
- a In case a videotape is positioned in the beginning, VISS REW”  
and REWdo not work.  
Buttons on remote control do not  
work.  
- a In case a videotape is positioned in the end, FF, VISS FF,  
PLAYand RECdo not work.  
- a Please check whether another button is pressed.  
Cable broadcasting can not be  
selected.  
- a Please select CABLEnot NETWORKfrom the CHANNEL  
SETTING.  
39  
Specifications  
VCR PART  
Power Supply  
DC 12V  
Consumed electricity  
Weight  
24W  
approx 3.9 Kg  
Dimension (WxHxD)  
Operative temperature  
Installation condition  
Received channels  
Signal type  
265mm x130mm x 275mm  
5°C~35°C (Humidity : 80% maximum)  
Horizontal  
VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125  
NTSC-M  
Antenna Input/output  
VIDEO input  
U/V-mixed: 75½ unbalanced  
1.0 Vp-p 47k ohm unbalanced, RCA JACK  
Line Input -8.8dBm, 47k ohm minimum  
3 or 4 CH  
AUDIO input  
VHF output  
VIDEO output  
1.0 Vp-p 47k ohm unbalanced, RCA JACK  
TAPE WIDTH  
12.65mm (1/2INCH) VHS  
Record System of Luminance Signal  
Record System of Color Signal  
Tape Speed  
Frequency Modulation Recording  
Down converted sub carrier phase shift system  
SP : 33.35 mm/s EP : 11.12 mm/s (FOR NTSC)  
SP : 2Hours EP : 6 Hours (FOR NTSC WITH T-120)  
ABOUT 4 Min (T-120)  
REC Time (T-120)  
FF/REW Time  
Luminance S/N  
SP : 43 dB Min  
1.Mono  
EP : 41 dB Min  
Audio Signal Output  
EE/SN-1 : -5.8dBm±2dBm(1Khz) 1Kohm Maximum  
SN-2 : SN-1+2,-5dBm(7Khz) 1Kohm Maximum  
2. Hi-Fi  
EE/REC => PB;SP -5.8dBm±2dBm(400Hz) 1Kohm Maximum  
SN-7A; -5.8dBm±2dBm(1Khz) 1Kohm Maximum  
Audio S/N (A.W)  
MONO ; SP 42 dB Minimum SLP 40dB mINIMUM  
Hi-Fi ; SP/SLP 68dB Minimum  
A.Frequency Range  
Hi-Fi ; SP/SLP 0+1,-3dB [20Hz-20KHz]  
40  
Distortion  
Hi-Fi; sp/slp 0.7% Maximum  
Mono ; SP 4.0% Maximum/SLP 5.0% Maximum  
Wow Flutter  
Hi-Fi ; SP/SLP 0.012% Maximum  
Mono ; SP0.0300% Maximum/SLP 0.400% Maximum  
Hi-Fi Channel Balance  
SP/SLP ±3.0 Miximum  
Hi-Fi CH Seperation (A.Weighted)  
sp/slp : 45dB Min  
DVD PART  
Non-contact Optical Pick-up System  
Pick-up System  
AT Attachment Packet Interface (ATAPI)  
* DVD/VCD/CD/CD-R/CD-RW/MP3/ SVCD/DVD-R  
* DVD : DVD-5, DVD-9, DVD-10, DVD-18, DVD-R  
* CD : CD-DA, CD-R, CD-R/W, Video CD, DVCD, SVCD,  
Enhanced-CD, Mixed-CD, CD-I  
* Disc diameter : 12cm, 8cm  
Playable disc  
* Disc Capacity  
DVD : 4.7GB(DVD-5, single layer)  
8.5GB(DVD-9, dual layer)  
9.4GB(DVD-10, double side & single layer)  
17.1GB(DVD-18, double side & dual layer)  
CD : 550MB(Mode 1,12cm)  
680MB(Mode 2,12cm)  
180MB(8cm)  
* Disc Thickness : 1.2mm (CD & DVD)  
* Disc Center Hole : 15mm diameter  
* Track pitch : 1.6§- (CD), 0.74§- (DVD)  
* Scanning velocity : 1.2~ 1.4 m/sec (CD)  
3.49 m/sec (DVD Single Layer)  
3.84 m/sec (DVD Dual Layer)  
* Block Size  
DVD : 2,048 bytes  
CD : Mode 0  
Mode 1  
2,352 bytes  
2,048 bytes  
2,336/2,048/2,328 bytes  
Mode 2  
Audio Signal Output  
Audio S/N(A. W)  
* 2.0 Vrms  
* 100dB(RCA JACK) Digital audio output  
* 20 Hz (CH 3) : - 0.3 ±1 dB  
1 KHz(CH 2) REFERENCE : 0 dB  
20 KHz(CH 6) : - 1.5 ( ±1 dB)  
Audio Frequency range  
41  
Analogue Audio output  
(2CH. L/R)  
* DVD : 48/96KHz sampling  
* VCD : 44.1KHz sampling  
* CD : 44.1KHz sampling  
Digital Audio output (COAXIAL)  
Vibration  
* DVD : 48KHz sampling  
* VCD : 44.1KHz sampling  
* CD : 44.1KHz sampling  
* Data read Operation :  
0.25G(0'P), at 10 to 500Hz sweep, sine wave,  
1 Octave/min(except resonance point)  
* Non-operating :  
2.0G rms, at 10 to 500Hz random  
(30min/Axis for X, Y, Z)  
After test, there shall be no hard errors.  
Shock  
* Data read Operation :  
6G, 11msec half sine wave  
(20 shocks for X,Y,Z with 3 seconds between shocks)  
* Non-operating :  
60G,11msec half sine wave  
After test, there shall be no hard errors  
Electrostatic  
Discharge  
Requirements  
* The drive should withstand 8kV test voltage  
of Electrostatic Discharge and meet  
the acceptance criteria as specified in IEC 801-2.  
* MTBF : 100,000 POH at 20% duty cycle  
in room temperature.  
Loader Reliability  
* MTTR : max. 30 min  
* Tray : min. 30,000 cycle (with limit switch)  
* Feeding : min. 1 million full stroke seeks  
(without limit switch)  
* Noise : max. 40 dB (at 1 m)  
Data Transfer  
Rate(Sustained)  
* DVD : 2.76 MB/sec(2X Speed in CLV mode)  
* CD : max. 600 KB/sec(4X Speed in CLV mode)  
* DVD : Less than 300 ms (Average), random  
Less than 360 ms (Average), full stroke  
* CD : Less than 340 ms (Average), random  
Less than 400 ms (Average), full stroke  
Access Time  
Data Buffer  
Error Rate  
256KB (DVD/CD)  
* max. 10E-12 (CD) , max. 10E-17 (DVD)  
Disc Loading  
* Type : motorized tray  
* Time : 1.5 sec(typical)  
42  
Operating time  
* Spin-up time : Less than 13 sec (Typical)  
* Stop time : Less than 2 sec(Typical)  
Laser parameters  
* DVD  
Semiconductor Laser / Wave length : 650nm /  
Emission power : 0.28 mV  
*CD  
Semiconductor Laser / Wave length : 780nm  
Emission power : 0.30 mV  
FM Transmitter  
*FM 88.1MHz ~89.9 MHz(11 Step, 0.2MHz)  
43  
Pyle Audio Inc.  
1600 63rd Street  
Brooklyn, NY 11204  

PYLE Audio PLVW1782R User Manual
Pelco Camera Lens 23FA12 User Manual
Panasonic Camcorder AG HMC150P User Manual
Panasonic AG HPX500 User Manual
Olympus SP 610UZ User Manual
Nikon IRT 4 12X42 User Manual
LG Electronics LG Lifes Good Car Video System W2346T User Manual
Kenwood KDC 422 User Manual
Kenwood Car Video System KVT 829DVD User Manual
JVC GY HD200CHU User Manual