PYLE Audio PYLE Plus Series PLCD38 User Manual

OWNER'S MANUAL  
ANTI-SHOCK COMPACT DISC PLAYER  
AUXILIARY INPUT AND  
SUPER POWER OUTPUT  
FOLD-DOWN FACE DETACHABLE PANEL  
FM-AM FM-MPX RADIO RECEIVER  
WITH REMOTE CONTROL  
MODEL : PLCD38  
P / N : 570-981812-05  
9. EJECT BUTTON  
Press the button to eject the disc inside disc slot.  
10. PANEL RELEASE BUTTON (FIGURE A)  
To detach the front panel, press the release button so that the panel fold down from vertical position to  
horizontal position and then pull it off of the chassis at horizontal position.  
To re-attach the panel, push the fold-down metal frame forward until it locks to the original postion. Then, put the  
panel at the right side of the position first and then press the left side of the panel until the mechanism lock it  
into place.  
11. MODE SELECTION  
Press this button to select Radio (TUNER), CD (S-CDP), or Auxiliary input (AUX) mode.  
12. LOCAL/DISTANT SELECTOR  
Press this button to prevent strong local stations from overlapping weaker stations. For normal operation, press  
this button again for distance.  
13. LOUD CONTROL  
Press this button to activate the loudness circuitry which compensates for loss of high and low frequencies  
during low volume levels.  
14. MUTE CONTROL  
Press this button to mute the volume control and “MUT” will appear on LCD display.  
15. AUDIO / SETTING SELECT  
Briefly press the button to select volume, bass, treble, balance or fader adjustment in cyclical mode.  
Whenpressingthebuttonformorethan2seconds, itactivatesasunitsettingselectionincyclicalmodeas  
following. TheunitsettingcanbechangedbyusingeitherVOL+orVOLbutton.  
· DSP OFF/ POP M/ ROCK M/ CLASS M/ FLAT M  
· BEEP OFF/ BEEP ON(notavailableforthismodel)  
· SEEK 1(tuneup/downbuttonperformsfasttunefunction)/ SEEK 2(performsautotuningfunctionwhentuneup/  
downbuttonpressedmorethan1second)  
· COLOR1/COLOR2(notavailableforthismodel)  
· VOLLAST/VOLADJ(presetvolumelevelwhenunitturnon)  
16/17. AUDIO LEVEL DOWN/UP CONTROL ( - Button ) / ( + Button )  
Press “SEL” button shortly and then pressing “+” or “-” button to adjust level of volume, bass, treble, balance or fader.  
• VOLUME - Press the (+) button to increase, or (-) button to decrease volume level.  
• BASS - While “BASS” is being displayed, press (+) button to increase or (-) button to decrease the bass level.  
• TREBLE - While “TREB” is being displayed, press (+) button to increase or (-) button to decrease the treble level.  
• BALANCE - While “BAL” is being displayed, press (+) or (-) button to level balance of speaker right and left.  
• FADER - While “FAD” is being displayed, press (+) or (-) button to level fader of speaker front and rear.  
18/19. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL  
On radio mode, press the button will tune one frequency step higher or lower. Pressing the button more than 1  
second can performs fast tuning function or auto tuning function.  
On CD mode, press this button will locate the beginning of the track being played or will locate the beginning  
of the next track. When pressing more than 2 seconds, it will move fast forward or fast backward to a specific  
position of a CD track.  
20. STATION PRESET BUTTON (1-6)  
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each  
preset button can store FM1, FM2, FM3, MW1, MW2 station frequency. Pressing the button momentarily recalls  
the station frequency which was memorized. There are 6 preset buttons, giving you capability of storing  
18FM / 12MW.  
NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station  
frequency will be stored in the button pressed. After this, the memorized station can be recalled by pressing the  
button once.  
On CD Mode  
• Preset 1 - press this button to pause the disc played.  
• Preset 2 - press this button to scan the first 10 seconds of all the tracks on the currently selected disc.  
• Preset 3 - press this button to repeat the current track of the disc.  
• Preset 4 - press this button to play disc at random order - Disc shuffle play.  
Page. 3  
P / N : 570-981812-05  
WIRE CONNECTION  
RESET FUNCTION  
The RESET button is located at the back of the  
panel. It is recessed in order to prevent accidental  
engagement, and can be activated with the tip of a  
ball-point pen or any similar pointed object. This  
reset circuitry is provided in order to protect the  
unit's microprocessor, and should only be activated  
under the following conditions :  
a) Initial installation after all wiring is completed.  
b) Abnormal operation is encountered such as  
numerical indication on display is erratic.  
c) Whenever the reset button is activated, all preset  
memory content will be erased and must be  
reprogrammed.  
CAUTION : Do not connect the speaker wires to chassis  
or car body. Each speaker wire cannot be soldered  
together with other wires. Otherwise, the unit will be  
damaged and no sound will come out anymore.  
INSTALLATION  
REMOTE CONTROL  
CAUTION : DO NOT PLACE THE UNIT OVER THE  
MAXIMUM INSTALLATION ANGLE OF 30°.  
OTHERWISE, THE UNIT MAY NOT WORK  
PROPERLY.  
WARNING!!  
Due to protection of CD Mechanism, two small screws on the top  
of the unit must be released before operate the unit. Otherwise, the  
CD Mechanism can not be working properly.  
UNIT REMOVAL  
1. Remove Front Control Panel.  
2. Slightly insert the key into the slot and  
gently to release.  
3. Separate the sleeve from the unit. Keep  
release key in a safe place as you may  
need for future removal of unit.  
P / N : 570-981812-05  
Page. 4  
P / N : 570-981812-05  

RCA Hollywood DV Bridge User Manual
QSC Audio Car Speaker AD CI52ST User Manual
PYLE Audio View Series PLTDN71 User Manual
Pioneer Car Video System X EM21V User Manual
Panasonic Palmcorder PV DV601 User Manual
Lennox Hearth SP5050 User Manual
Land Pride Car Video System 4220ST User Manual
Kenwood KDV S210P User Manual
Kenwood Car Stereo System TM 732E User Manual
Kenwood Car Stereo System KDC BT852HD User Manual