PYLE Audio PLDN70U User Manual

6. Specification  
Contents  
1. Before Operation...........................................................................................3  
1.1 Glossary................................................................................................ 3  
1.2 Precautions............................................................................................3  
1.3 Maintenance and Cleaning of Discs..........................................................4  
1.4 Battery Information of the Remote Control.................................................4  
1.5 The Remote Control Description...............................................................5  
1.6 The Locations and Names of Controls on or in the unit................................6  
1.7 Wires Connection Description..................................................................7  
1.8 Unit Installation.......................................................................................8  
General Specification  
Power Supply Requirement..................................................DC 12V  
Maximum Power Output...................4 x 80W(measured at DC 14.4 V)  
Dimensions(w x h x d)........................................178 x 50.5 x 162mm  
DVD Deck Specification  
2. Common Operation.......................................................................................9  
3. Radio Operation...........................................................................................10  
Format.....................................DVD/VCD/JPEG/MP4/MP3/WMA/CD  
Video System....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional)  
Audio System..............................................................24 bit/96KHz  
Loading System.......................................................... Auto Loading  
Mounting Angle.................................................................0 to +/-30  
4. Disc, USB and Card Operation......................................................................11  
4.1 Load/unload Disc, USB or Card...............................................................11  
4.2 Pause Playback.....................................................................................13  
4.3 Stop Playback .......................................................................................13  
4.4 Select Chapter/Track with the >>|/|<< Buttons..........................................13  
4.5 Select Chapter/Track with the Number Buttons.........................................13  
4.6 Select Chapter/Track with the Root/PBC Menu.........................................13  
4.7 Playback with Speed..............................................................................14  
4.8 Playback with Slow Speed......................................................................14  
4.9 Display Still Frame Step by Step.............................................................15  
4.10 Playback Repeatedly...........................................................................15  
4.10.1 One/All Repeat.................................................................................15  
4.10.2 A-B Repeat.......................................................................................15  
4.11 Playback in Scan Mode.........................................................................16  
4.12 Playback from a specified Chapter/Track or a Specified Time...................16  
4.13 Playback in Random.............................................................................16  
4.14 Playback in Different View-Angle...........................................................16  
4.15 Playback in Zoom Mode........................................................................16  
4.16 Change the Caption Language..............................................................17  
4.17 Change the Audio Language.................................................................17  
4.18 Change the Video Signal System..........................................................17  
4.19 Look over the Playback Status..............................................................17  
4.20 Program Playback...............................................................................18  
4.21 Playback IMAGE files..........................................................................18  
4.22 Playback MP4 files..............................................................................19  
4.23 ESP and ID3 Function..........................................................................19  
4.24 The DVD System Menu Setup Operation................................................19  
Video Specification  
Video Type...................................................................16:9 and 4:3  
Video Output level......................................Composite:1.00.2Vp-p  
Load impedance: 75 ohms  
Horizontal Resolution................................................................500  
Audio Specification  
Audio Output(Analog audio)..........................................2.0+0-1.0 Vrms  
Frequency Response.............................20Hz ~ 20KHz(at 1KHz 0 dB)  
S/N Ratio(Audio).............................................90dB(at 1KHz 0 dB)  
Separation..............................................................................50dB  
Radio Specification  
FM Section  
Frequency range..............................................87.5MHz - 107.9MHz  
Usable sensitivity......................................................................3uV  
I.F Frequency....................................................................10.7MHz  
*
The Region Code.................................................................................23  
5. The Trouble Shooting...................................................................................24  
6. Specification...............................................................................................25  
AM Section  
Frequency..........................................................530KHz - 1710KHz  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
5. The Trouble Shooting  
1. Before Operation  
1.1 Glossary  
Please read the users manual carefully before using the DVD player. If you have any troubles  
in using this player, try to solve the problems by the suggestions mentioned below. If you can  
not remove the trouble after using all the suggestions, please contact the company or the  
technical service center authorized by us. For the sake of your safety, please do not open the  
cover and repair the player by yourself, if that, it may cause electric shock.  
PBC (playback control)  
It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0  
format used for the playback control. For the discs contained PBC, It can  
playback interactive software with the menu displayed on monitor screen.  
If the disc contain still images, it can playback high definition of still image.  
NO PICTURE, SOUND AND INDICATION  
*
*
*
*
Ensure that the power switch is on.  
Ensure that the wall inlet is ok.  
Ensure that the power cord is not damaged or the fuse is not blown.  
Ensure that the power plug is connected to the inlet tightly.  
Title  
NO SOUND BUT HAVE PICTURE  
*
*
*
*
*
Ensure that the players audio output has a good connection with monitors audio input.  
Check whether the audio connector is damaged.  
Generally, the title is the important part of DVD disc. for example, the  
theme part of movie is title 1, the part described how to make movie is title  
2, the cast is title 3, etc. Every title contain a serial number that is easy to  
look up.  
Check whether you have turned down the volume.  
Ensure that you have set the right AUDIO setup of the player.  
Ensure that the audio is not under mute.  
NO PICTURE BUT HAVE SOUND  
Chapter  
*
*
*
*
Ensure that the players video output has a good connection with monitors video input.  
Ensure that you have turned your monitor to the AV input channel connecting to your player.  
Check whether the video connector is damaged.  
A title can be divided into several blocks, so that every block can be operated  
as a unit, the unit is called chapter. The chapter contain a unit at least.  
Ensure that you have set the right VIDEO settings of the player.  
Track  
BLACK AND WHITE PICTURE OR SCREEN ROLLING  
Ensure that you have set the right TV SYSTEM (e.g. PAL, NTSC) setting.  
It is the biggest component of VCD. Generally, every song of karaoke disc  
is a track.  
*
FLAWS OF PICTURE OR SOUND  
*
*
*
*
Check whether the setting of AUDIO is right.  
Check whether the disc is scratched or stained.  
Check whether the AV connector and the output terminal is stained.  
Check whether there is condensation inside the Lens. If so, leave the player off for an hour  
or so, then try again.  
1.2 Precautions  
*
Check whether the installation angle is less than 30.  
DISPLAY NO DISC OR BAD DISC  
Safety  
*
*
*
*
*
*
Ensure that you have put the disc on the tray.  
1. Power Source: The unit should be connected to power supply only of  
the type described in the operating instructions or as marked on the unit.  
2. The unit is designed for negative terminal of the battery which is  
connected to the vehicle metal. Please confirm it before installation.  
3. Do not allow the speaker wires to be shorted together when the unit is  
switched on. Otherwise it may overload or burn out the power amplifier.  
4. Do not install the detachable panel before connecting the wire.  
Check whether the disc is put in the reverse side.  
Check whether the disc is distorted.  
Check whether the disc is stained or scratched badly.  
Ensure that the disc format is compatible to the player.  
Ensure that the temperature inside the car is not too high. If so, cool off till the ambient  
temperature returns to normal.  
*
Replace another disc to insert it into the disc compartment.  
REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK  
*
Check the batteries of remote control and make sure that they are to be powerful and  
good conductivity.  
Environment  
*
*
Direct the remote control to the IR sensor of the player.  
Check whether there are some obstacles between the remote control and IR sensor.  
1. Do not use this unit when water and moisture is near it.  
2. If moisture forms inside the Lens, it may not operate properly. To correct  
this problem, wait about one hour for the moisture to evaporate.  
3. If the car interior is extremely hot, do not use the player until the car has  
been driven for a while to cool off the interior.  
SOME FUNCTION BUTTONS DO NOT WORK  
*
*
*
Turn off the power, then turn on again.  
Reset the unit to zero, then turn on again.  
Remove the front panel from the unit, then install it again and then turn on again.  
THE RADIO DOES NOT WORK  
Check whether the antenna cable is connected firmly. Or manually tune for a station.  
*
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
1.3 Maintenance and Cleaning of Discs  
Disc Maintenance  
*
The Region Code  
1. To keep the disc clean, handle the disc by its edge, do not touch the disc  
surface of the play side.  
Q: Not begin to playback but to display REGION ERROR after inserting disc into  
disc compartment. Why ?  
2. Do not stick paper or tape on the disc. If there is glue (or analog) on the  
disc surface, must wipe it up before using.  
A: Because the DVD player and disc has respective region code. If the region codes  
of them are not match with each other, the DVD player can not play the disc.  
3. Do not expose the disc to direct sunlight, or nearby heat sources such as  
caliduct, or leave it in a car parked in direct sunlight where there can be a  
considerable rise in temperature.  
4. Put the disc inside disc case to keep temperature after finishing playback.  
Disc Cleaning  
Appendix: The region code of DVD:  
1. Before playing, wipe the disc with a clean lint. wipe the disc outwards from  
The Motion Picture Association of America (MPAA) divided the world into 6  
regions, and named every region a code, namely region code. The region codes  
and the countries or areas represented by the region codes as follows:  
the disc center.  
2. Do not use petrel, thinner. commercially cleaner or anti-static spray can  
damage the unit.  
Region 1: America, Canada, East-Pacific Inlands;  
Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East;  
Region 3: South-east Asian countries include Taiwan, Hong Kong, South Korea,  
Thailand, indonesia, etc.;  
+
side up  
Region 4: Australia, New Zealand, Central South America, South Pacific Inlands;  
Region 5: Russia, Mongolia, Indian Peninsula, Middle Asia, East Europe, North  
Korea, North Africa, North-west Asia etc.;  
B
A
Region 6: China mainland.  
Fig.1  
Fig.2  
Fig.3  
Basically, when a DVD movie disc for the version of region 6 was decided not to  
issue, we need to purchase another DVD player that can play the DVD movie disc  
for the version of non-region 6. In order to view this disc, viewer who does not have  
the non-region 6 DVD player facilities will have to spend extra sum of money to buy  
it. The problems caused from the area code inconsistency between the disc and the  
DVD player has pushed for the production of Unlock-Version DVD player facilities,  
and some DVD disc sets allow user to modify the area codes for a limited number of  
times. But note that only the discs produced by the 8 biggest filmmaking companies  
of America restrict so, they are not one of original DVD format. That is to say, the  
DVD movie discs not produced by the 8 biggest filmmaking companies of America  
were not restricted by the rule of region code. Generally, they are called  
FreeRegionCode discs or Full Region discs. The 8 biggest filmmaking companies  
of America are as follows:  
1.4 Battery Information of the Remote Control  
Replace Battery in the Remote Control:  
1.Before using the remote control for the first time, pull the insulating  
sheet out of the remote control as the direction indicated by the  
arrow.(see fig.1)  
2.Press the movable block hold as the direction indicated by the A arrow  
(See fig.2), then pull the battery holder out of the remote control as  
the direction indicated by the B arrow(see fig.2).  
3.Replace the old battery by a new battery with (+) polarity side upward.  
(See fig.3).  
4.Insert the battery holder to the original position in remote control.  
(See fig.3).  
1. WarnerBros;  
Note about the Battery of the Remote Control:  
1.Improper use of battery may cause overheating or explosion. so that  
Result in injury or fire .  
2. Columbia;  
3. 20thCenturyFOX;  
4. Paramount;  
2.Battery leakage may cause damage to the remote control(Battery  
Life: 6 months with normal use in normal room temperature).  
3.Do not short the battery.  
5. Universal;  
6. UA(UnitedArtist);  
7. MGM(MetroDogwynMayer);  
8. WaltDisney  
4.Do not throw the battery into the fire.  
5.To avoid the risk of accident, keep the battery out of reach of children.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
1.5 The Remote Control Description  
HUE  
It is for adjusting the hue of the video output.  
SATURATION  
3
27  
1
35  
1. TILT BUTTON  
2. MENU BUTTON  
3. POWER BUTTON  
4. ^ BUTTON  
It is for adjusting the saturation of the video output.  
SHARPNESS  
PWR  
P/N  
It is for adjusting the sharpness of the video output.  
EQ  
BAND  
4
14  
2
4.24.5 SPEAKER SETUP  
MU  
MODE  
MENU  
29  
32  
9
34  
13  
33  
SEL  
0K  
6
8
5. >>| BUTTON  
SETUP  
+
6. > BUTTON  
5
7
31  
30  
7. |<< BUTTON  
8. v BUTTON  
10  
11  
12  
1
-10  
2
+10  
4
8
3
7
5
6
DOWNMIX  
9. SEL BUTTON  
10. PLAY/PAUSE BUTTON  
It is for selecting your desired sound effect when there is not central speaker  
CLK  
SLOW_FWD  
LOC  
0/10  
10+  
9
ST  
24  
28  
16  
15  
and sub-woofer. There are 3 mode: LT/RT, STEREO, VSS.  
LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the  
item, so it will output audio signal with vivid theatre effect.  
SEARCH  
APS  
21  
22  
18  
17  
11. NUMBER(0~10,+10  
-10) BUTTONS  
12. 10+ BUTTON  
STEREO: If you choose the item, when outputting audio signal with 5.1 channels,  
it will output the left and right channels of signal ; when outputting audio signal  
with 2 channels, it will output the common 2 channels of stereo signal.  
VSS: If you choose the item, when playing a disc recorded with 5.1 channels,  
the main channel speakers can output audio signal with VSS effect.  
ZOOM  
A-B  
INT  
RPT  
RDM  
26  
25  
23  
AUDIO  
TITLE/PBC  
SUBTITLE  
19  
20  
13. SETUP BUTTON  
14. MODE BUTTON  
PROG  
STEP  
OSD  
LOUD  
4.24.6 DIGITAL SETUP  
15. APS BUTTON  
28. LOC/SLOW-FWD BUTTON  
16. SEARCH BUTTON  
17. RDM BUTTON  
18. RPT BUTTON  
29. MUTE BUTTON  
30. STOP BUTTON  
31. VOLUME- BUTTON  
32. < BUTTON  
19. SUBTITLE BUTTON  
20. TITLE/PBC BUTTON  
21. ANGLE/ST BUTTON  
22. ZOOM BUTTON  
23. AUDIO BUTTON  
24. CLK BUTTON  
OP MODE  
It is for selecting audio output mode  
LINE OUT: It can linearly compress the audio signal. So the volume level is lower.  
You should select the item at night.  
33. OK BUTTON  
34. VOLUME+ BUTTON  
35. BAND AND P/N BUTTON  
36. PROG BUTTON  
37. OSD BUTTON  
RF REMOD: It can make the volume level higher. You should select it at daylight.  
DYNAMIC RANGE  
After selecting the compression mode of LINE OUT, set the item, so you can  
adjust the linear compression ratio. If you set it to be FULL, the Peak-to-Peak  
value of the audio signal is the minimum; if you set it to be OFF, the Peak-to-  
Peak value is the maximum.  
25. A-B BUTTON  
DUAL MONO  
It is for selecting a desired audio output mode for the left and right ways of signal.  
It is mainly for Karaoke of Ac3. There are 4 modes in all as follows:  
STEREO, MONO L, MONO R, MIX MONO.  
38. LOUD BUTTON  
39. STEP BUTTON  
26. INT BUTTON  
27. EQ BUTTON  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
4.24.2 LANGUAGE SETUP  
1.6 The Locations and Names of Controls on or in the unit  
OSD LANGUAGE  
7" TFT  
This item is for selecting the language of the SYSTEM MENU and all operating  
prompt interface displayed during playback.  
AUDIO LANG  
This item is for selecting a audio language.  
SUBTITLE LANG  
_
/MU  
ANG  
EJECT  
MODE  
This item is for selecting a subtitle language.  
MENU LANG  
+
RESET  
This item is for selecting a disc menu language.  
2
4
8
1
3
6
7
5
4.24.3 AUDIO SETUP  
The Diagram of the Face of the Front Panel  
9
SD/MMC  
10  
AUDIO OUT  
there is only ANALOG mode, i.e. SPDIF/OFF, not optional.  
KEY  
It is for selecting your desired basic music tone(from low to high).  
4.24.4 VIDEO SETUP  
The Diagram of the Face of the Unit After Sliding down the Front Panel  
1. POWER/MUTE button  
2. MODE button  
6. IR remote sensor  
7. RESET button  
8. EJECT button  
9. Disc slot  
3. PLAY/PAUSE button  
4. ANG button  
BRIGHTNESS  
It is for adjusting the brightness of the video output.  
CONTRAST  
5. + and - buttons  
10. SD/MMC Card slot  
It is for adjusting the contrast of the video output.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
1.7 Wires Connection Description  
For the DVD System Menu, there are 6 setup pages in all. They display as follows:  
The Description of the Input/Output Interface of the Rear Cabinet  
4.24.1 SYSTEM SETUP  
Fixed ISO Female Connector  
Clip of the other wires  
The Description of the Other Wires Through the Clip  
Clip  
TV SYSTEM  
This product supports output of various TV system.  
If your TV set has only NTSC or PAL system, the screen will blink and become  
colorless when a wrong TV system is selected. In this case, press the N/P button  
to switch the right TV system to match the TV color system.  
TV TYPE  
The setup item is for matching TV screen size.  
4:3 PS: Choose the item when connecting a TV set with 4:3 screen. When playing  
the pictures with 16:9 size, the left and right parts of the video will be cut out,  
and display in full screen.  
4:3 LB: Choose the item when connecting a TV set with 4:3 screen. When playing  
the pictures with 16:9 size, the top and bottom parts of the TV screen will be  
turned into a black square respectively.  
16:9: Choose the item when connecting a TV set with 16:9 wide screen.  
PASSWORD  
VIDEO OUT2  
AUX IN-L  
AUX IN-V  
CAMERA  
VIDEO OUT1  
AUX IN-R  
REVERSE  
PA RKING  
RCA-R  
SUBWOOFER  
RCA-L  
Radio Ant  
USB SOCKET  
This setup item is for locking or unlocking the rating level of the Parental Control.  
The defaulted state is locked. The defaulted password is 0000.  
You can set a new password that you like: Select the PASSWORD item and then  
press the > button to enter it, then input the original password 0000, and then  
press the OK button to unlock it. Press the > button to enter it again, then input  
a new password that you like and then press the OK button to make it effective.  
Before the other persons see the Manual, you should get the password in mind  
and cut out the part of PASSWORD in the Manual.  
The Description of the Fixed ISO Female Connector  
RATING  
The item is for setting a new rating level of the Parental Control.  
1. Select the PASSWORD item and then press the > button to enter it, then input  
the password mentioned above, and then press the OK button to unlock the  
setting of the rating level of the Parental Control.  
2. Select the RATING item and then press the > button to enter it, then use the  
direction buttons to select your desired rating level, then press the OK button  
to confirm.  
CONNECTOR A  
CONNECTOR B  
1.  
2.  
3.  
1. Rear Right Speaker (+)  
2. Rear Right Speaker (-)  
3. Front Right Speaker (+)  
4. Front Right Speaker (-)  
5. Front Left Speaker (+)  
6. Front Left Speaker (-)  
7. Rear Left Speaker (+)  
8. Rear Left Speaker (-)  
3. Select the PASSWORD item again and then press the > button to enter it, then  
input the password, and then press the OK button to lock the new setting of  
the rating level of the Parental Control.  
4. Memory +12V  
5. Auto Antenna Output  
6.  
7. 12V (To Ignition Key)  
8. GROUND  
DEFAULT  
This item is for making all setup items change back to original status.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
3. During IMAGE playback, press one of the >/</^/v buttons to change the angle of  
viewing picture that is displaying as follows:  
>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT  
During IMAGE playback, press the PROG button to change the mode of refresh picture.  
During IMAGE playback, press the STOP button to stop playing and return to the root  
menu.  
Description of Connecting the Parking Brake Line to the Parking Brake System Built in the Car  
Parking brake  
*
*
During IMAGE playback, the following buttons are not available: SLOW-FWD,  
SUBTITLE, TITLE, ANGLE, AUDIO, RDM, INT and A-B.  
In IMAGE mode, the other operations are same as ones in MP3/WMA mode.  
Parking brake line(green)  
Parking brake switch  
(inside the car)  
To metallic body or chassis of the car  
4.22 Playback MP4 files  
NOTE: after connecting the Parking Line, the video on the small monitor of the front panel will be display only after br aking the car.  
1. The root menu is displayed on TV when beginning to switch on Mp4 mode, then it will  
automatically play the first file.  
During playback, press the STOP button to stop playing and return to the root menu.  
2. When displaying the root menu, press the direction buttons to select your desired  
FOLDER ,file or file sort icon, then press the OK or PLAY button to open the FOLDER,  
open the files of the file sort icon or play the selected file.  
When displaying the root menu, you can also use the number buttons to select the  
serial number of the file and play the file.  
*
*
The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid.  
The other functions are same as ones in DVD mode; but the RPT function is same as  
one in MP3/WMA mode.  
1.8 UNIT INSTALLATION  
4.23 ESP and ID3 Function  
INSTALLATION INSTRUCTIONS  
There is ESP function for all formats of discs.  
1)REMOVE THE 2 DECK TRANSPORT SCREWS BEFORE INSTALLATION.  
2)PLEASE DO THE CONNECTION OF THE POWER, SPEAKERS AND ANTENNA  
ACCORDING TO THE REQUIREMENT OF THE INSTRUCTION BOOK .  
3)IF THE LEFT AND RIGHT INSTALLATION BRACKETS SUPPLIED BY FACTORY  
ARE FIT FOR YOUR CAR, PLEASE FIX THEM ON THE CHASSIS AND THEN  
FIX THE UNIT IN THE CAR WITH SCREWS ACCORDING TO THE FOLLOWING  
DIAGRAM; OTHERWISE, PLEASE USE THE LEFT AND RIGHT INSTALLATION  
BRACKETS SUPPLIED BY YOUR CAR SUPPLIER.  
In MP3/WMA mode, during playback, the information of the file name, folder name,  
song s title, artist and album will be scrolling on the LCD display. As long as the  
current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0  
format, the 3 items underlined above will be scrolling on the LCD display; otherwise,  
they will not.  
DASH BOARD  
TRANSPORT SCREWS  
RIGHT INSTALLATION BRACKET  
4.24 The DVD System Menu Setup Operation  
COMPLETED UNIT  
PLASTIC FRAME  
1. Press the SETUP button on the remote control to access the DVD System Menu on  
the monitor.  
2. There are 6 setup pages in all for the System Menu. Press the > or < button to select  
an desired setup page.  
LEFT INSTALLATION BRACKET  
3. Press the ^ or v button to select an setup item in the selected setup page.  
4. Press the > button to enter the setup item. Then press the v or ^ button to select a  
desired mode of the setup item, finally press the OK button to confirm it.  
*
*
Press the < button to return to the upper level.  
Press the SETUP button again or use the direction buttons to highlight the item of the  
EXIT SETUP and then press the OK button to exit the System Menu.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
4.20 Program Playback  
2. Common Operation  
It allows you to enter the order in which you want some chapters/tracks in  
DVD/VCD/MP3/WMA/CD to play.  
1. To turn on/off the unit  
In power off mode, short press the POWER button to turn on the unit.  
In power on mode, long press the POWER button on the front panel or short  
press the POWER button on the remote control to turn off the unit.  
1
During playback, press the PROG button to enter a program interface as  
follows:  
for DVD  
for VCD/MP3/WMA/CD  
2. To select an optimal angle of the monitor of the Car Audio System  
To select an optimal angle of the monitor of the Car Audio System, press the ANG  
button on the front panel or TILT button on the remote control repeatedly.  
3. To select function mode  
Press the MODE button to select RADIO, DISC  
(After inserting a disc), USB(After inserting a USB  
storage), CARD(After inserting a card) or AUX  
mode.  
2
3
4
Use the direction buttons to move cursor onto the desired place for inputting  
the sequence number.  
During playback, tapping the  
icon after popping  
up Keyboard interface can pop up Mode Menu as  
right. then tap one icon in it to select your desired  
mode.  
Use the number button to input desired sequence number of title/chapter/  
track with desired sequence.  
Use the direction button to move cursor onto Play item, then press the OK  
button to play the programmed titles/chapters/tracks in programmed order;  
only pressing the PLAY button also can play the programmed titles/chapters  
/tracks in programmed order.  
To exit program playback, firstly press the STOP button, then press the PLAY  
button to enter sequence playback; or press the PROG button twice again.  
To remove the all programmed sequence numbers, move the cursor onto  
Clear item, then press the OK button.  
To change the programmed sequence, move the cursor onto the item you  
want to change, input the desired sequence number.  
During VCD playback, if it is in PBC ON mode, at the same time of entering  
the state of program playback, it turns off PBC mode.  
Mode Menu  
4. To adjust sound level  
press or hold the + or - button to directly adjust the  
volume level.  
*
*
*
*
5. To mute sound  
Press the MUTE button on the remote control to turn on/off MUTE mode.  
pressing the POWER button on the front panel shortly also can turn on/off MUTE  
mode.  
6. To display and adjust the clock time  
Press the CLK button to display clock time on the screen of the monitor.  
Long press the CLK button to change the color of the hour of the clock, then press  
the + or - button to adjust the hour; and then briefly press the CLK or SEL button  
to change the color of the minute of the clock, then press the + or - button to adjust  
the minute.  
4.21 Playback IMAGE files  
1. The root menu is displayed on the monitor when beginning to switch on IMAGE  
mode. .  
7. To select a desired EQ mode  
In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort  
icon is for IMAGE file; the right file sort icon is for VIDEO file. If one of these 3  
file sort does not exist, you can not move cursor onto the file sort icon.  
2. When displaying the root menu, press the direction buttons to select your  
desired FOLDER, file or file sort icon, then press the OK or PLAY button to  
open the FOLDER, or play the selected file, or play only this sort of file.  
When displaying the root menu, you can also use the number buttons to  
select the serial number of the file and play the file.  
Press the EQ button on the remote control to select one of the preset music  
equalizer curves: POP, ROCK, CLAS, FLAT. The sound effect will be changed.  
8. To turn on/off LOUD mode  
Press the LOUD button to turn on/off LOUD mode.  
When turning on LOUD mode, it will enhance bass level immediately when bass  
is not enough.  
When you select the IMAGE file sort icon, press the ^ or > button to select the  
first IMAGE file, then press the v button to select the desired IMAGE file, finally  
press the OK or PLAY/PAUSE button to display the image in full screen from  
the selected IMAGE file.  
9. To reset the player  
When the monitor display wrongly or some buttons are not available or sound is  
distorted, press the RESET button to rehabilitate the distorted program to zero.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
11.To do general setup  
To do general setup, first pop up Mode Menu as in item 2,  
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF.  
Press one of the ^/v/>/< buttons to select the area you want to enlarge.  
then tap the  
icon in the Mode Menu to pop up GENERAL  
SETUP interface as right.  
In the interface, select one of CLOCK SET, RDS MODE ,  
OSD LANG, RADIO FREQ and SENSE SET on the left side  
by tapping them, then set them by tapping some icons on  
the right side accordingly.  
4.16 Change the Caption Language  
* SENSE SET is used to set the sensitivity of stopping auto  
searching for an available radio station. When you tap it,  
it will ask you to input a password. The password is 191713,  
after inputting it, you can set the item.  
In the state of DVD playing, press the SUBTITLE button repeatedly to  
select the language of the caption or turn off the caption.(depend on the  
media used.)  
GENERAL SETUP  
In the state of VCD/MP3/WMA/CD playing, the button is not available.  
12.To do calibration  
To pop up Calibration interface during media playback, first  
press the STOP button twice, then press the ZOOM button, finally press the ^ and v buttons  
in turn.  
4.17 Change the Audio Language  
In the interface, you can have calibration by accurately tapping the cross cursor.  
1. In the state of DVD playing, press the AUDIO button repeatedly  
on the IR remote control to select the desired language type.  
(depend on the media used)  
3. Radio Operation  
2. In the state of VCD playing, press the AUDIO button repeatedly to  
select the sound mode of the MONO L, MONO R, MIX MONO and Stereo,  
no language function.  
1. Enter RADIO mode  
When you use MODE button or Mode Menu to enter RADIO  
mode, it will display RADIO interface as right.  
3. In the state of CD/WMA/MP3 playing, the AUDIO button is invalid.  
In RADIO interface, tapping the  
icon can enter Mode  
Menu; tapping the  
icon can turn on or off TFT display;  
icon can pop up AUDIO & VIDEO SETUP  
tapping the  
RADIO interface  
4.18 Change the Video Signal System  
interface as right; the other icons are same as the  
corresponding buttons in the unit panel or in the Remote  
Control.  
During playback of DVD/VCD , press the BAND(P/N) button repeatedly to  
change the VIDEO SIGNAL SYSTEM mode .  
In the AUDIO & VIDEO SETUP interface, you can adjust  
VOLUME, TREBLE, BASS, BALANCE, FADER, BRIGHT-  
NESS, CONTRAST, COLOR, HUE; you can also turn on  
or off DBAS, MBP, LOUD; you can still select your desired  
transparency mode(by STD) and EQ mode(by EQ); tapping  
4.19 Look over the Playback Status  
the  
icon can return back to the previous status.  
1. In the state of DVD playing, press the OSD button repeatedly on the  
remote control to turn on/off the playback status. When it is on, it will  
display the information such as: the serial number of the playing title, the  
serial number of the playing chapter, the elapsed time of the playing chapter,  
the remained time of the playing chapter, the elapsed time of the playing title,  
the remained time of the playing title, etc.  
2. In the state of VCD/CD playing, press the OSD button repeatedly on the  
remote control to turn on/off the playback status. When it is on, it will  
display the information such as: the serial number of the playing track, the  
elapsed time of the playing track, the remained time of the playing track, the  
elapsted time of the disc, the remained time of the disc.  
AUDIO & VIDEO SETUP interface  
2. BAND BUTTON  
In RADIO mode, press the BAND button on the remote control to select your desired radio band  
of FM1, FM2, FM3, AM1 and AM2, and the word means which band is selected will be displayed  
on the small monitor of the front panel.  
3. TUNE/SEEK UP/DOWN BUTTONS  
In RADIO mode:  
1) Long press the >>|/ |<< button to automatically search up/down for a available station from the  
current frequency.  
2) Briefly press the >>| / |<< button to manually search up or down with step by step for your  
desired station from the current frequency.  
4. APS BUTTON  
In RADIO mode:  
3. In the state of MP3/WMA playing, press the OSD button repeatedly on  
the remote control to turn on/off the playback status. When it is on, it will  
display the information such as: the serial number of the playing track, the  
elapsed time of the playing track, the remained time of the playing track.  
1) When long pressing the APS button, the radio searches from the lowest frequency and  
checks the signal strength level until 1 cycle search is finished. And then the 6 strongest stations  
are preset to the corresponding preset number memory bank. The AS operation is implemented  
in the each bank of the selected band. When the AS operation is finished, it will scan each preset  
station for 5 seconds in FM or AM band from M1 as briefly pressing APS button. After  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
4.11 Playback in Scan Mode  
finishing a circle of scanning , it will resume broadcasting on the M1.(It can store 3x6  
stations for FM and 2x6 stations for AM in all)  
1. In the state of VCD(PBC OFF)/CD playing, press the INT button to play  
the previous 15 seconds part of each track on the disc. Press the INT button  
again to resume normal playback.  
2) When briefly pressing the APS button, the radio will scan each preset station for 5  
seconds in FM or AM band from M1. After finishing a circle of scanning, it will resume  
broadcasting on the M1.  
2. In the state of DVD/MP3/WMA playing, the INT button is not available.  
NOTE: In FM band, FM1,FM2,FM3 is checked one at a time.  
In AM band, AM1, AM2 is checked one at a time.  
4.12 Playback from a specified chapter/track or a specified time  
5. PRESET STATION [ 1-6 ] BUTTONS  
In RADIO mode:  
1. In the state of DVD playing, press the SEARCH button to display a  
interface and highlight the title item, then use the number buttons to input  
the serial number of the title; use the direction buttons to highlight the chapter  
item, then use the number buttons to input the serial number of the chapter;  
you can still use the direction buttons to highlight the time item, then use the  
number buttons to input the desired time to start playback; finally press the  
OK or PLAY button to play the selected chapter or play from the selected time.  
1) To memorize the current frequency on the current band, long press any one of the six  
preset buttons (1-6) .  
2) To recall the preset memory on the current band, press one of the preset buttons [1-6] .  
2. In the state of VCD/MP3/WMA/CD playing, press the SEARCH button to  
display a interface and highlight the track item, then use the number buttons  
to input the serial number of the track; you can still use the direction buttons  
to highlight the time item, then use the number buttons to input the desired  
time to start playback; finally press the OK or PLAY button to play the selected  
track or play from the selected time.  
6. STEREO/MONO BUTTON  
Press the ST button on the remote controller to select the STEREO or MONO sound  
mode for FM band.  
7. LOC BUTTON  
1) In RADIO mode, when the signal of the distance radio station are very weak and the  
receiving effect is bad during tuning, check whether there is the word LOC on LCD. If  
there is the word LOC on LCD, press this button to turn off the LOC function, then tune  
again for the distance radio station;  
4.13 Playback in Random  
In the state of DVD/VCD(PBC OFF)/MP3/WMA/CD playing, press the  
RDM button to switch between RANDOM (ON)/RANDOM OFF. When in  
RANDOM (ON) mode, it will play in random.  
2) In RADIO mode, when the signal of the local radio station are too strong to lead that the  
interference to the receiving effect during tuning, press this button to turn on the LOC  
function to display the word LOC on LCD, then tune again for the local radio station.  
4.14 Playback in Different View-Angle  
1. In the state of VCD/MP3/WMA/CD playing, the VIEW-ANGLE button on  
the IR remote control is not available.  
4. Disc, USB and CARD Operation  
4.1 Load/unload disc, USB or CARD  
2. In the state of DVD playing, press the VIEW-ANGLE button repeatedly  
on the IR remote control to view in different angle.(This function is only  
for the DVD media with ANGLE function)  
To play files in a disc or card, press the EJECT button to slide down the monitor .  
Then insert the disc or card into the disc slot or SD/MMC Card slot.  
4.15 Playback in Zoom Mode  
To unload the disc or card, press the STOP button twice to stop playback, then  
press the EJECT button to slide down the monitor and eject disc in the disc slot and  
then remove the disc; or push the card firstly and pull it out of the card slot.  
In video/image mode, during playback, press the ZOOM button continuously  
to enlarge a certain area of the images on the screen with these multiples:  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
To play files in an USB, insert the USB into the USB  
jack connecting to the Rear cabinet.  
During slow forward, press the PLAY button to resume normal playback.  
The function is only for video.  
To unload the USB, press the STOP button twice  
and then remove the USB .  
4.9 Display still frame step by step  
If the unit is currently playing video, press the TEL button consecutively  
to display still frame step by step.  
Remark: If the disc or USB includes folder(for  
MP3/WMA/MP4/JPEG files), after loading, it will  
display a root as right. On the bottom side of the root,  
Root interface for MP3/WMA/MP4/JPEG  
Press the PLAY button to resume normal playback.  
the  
icon is for audio files; the  
icon is for  
image files; the  
icon is for Video files. If files of  
these 3 file sort does not exist, you can not move  
cursor onto the file sort icon.  
4.10 Playback Repeatedly  
4.10.1 ONE/ALL Repeat  
Remark: During playback, tapping the  
icon in  
the root (for MP3/WMA/MP4/JPEG) or any place on  
the screen (for CD/VCD/DVD/MP4/JPEG) can pop  
up the keyboard interface as right.  
1. In the mode of DVD playback:  
Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL  
or REP OFF.  
Keyboard interface-1  
2. In the mode of VCD(PBC OFF)/CD playback:  
: Tapping it can pop up Mode Menu.  
press the RPT button to select REP ONE, REP ALL or OFF.  
: Same as the corresponding buttons  
on the Remote Control.(for MP3/WMA/MP4/JPEG)  
: Same as the corresponding button on the  
Remote Control.(for MP3/WMA/MP4/JPEG)  
: Same as the corresponding button on the  
Remote Control or on the front panel.  
When it is in the state of PBC ON, during VCD disc playing, the RPT  
button are not available.  
3. In the mode of MP3/WMA playback:  
: Same as the TITLE button on the Remote  
Control (available only for DVD).  
Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.  
Keyboard interface-2  
: Tapping it can stop playback and pop up the  
root.(exist only for MP4/JPEG)  
: Tapping one of them can select next or  
previous chapter/track.  
4.10.2 A-B Repeat  
Press the A-B button if you want to repeat a specific segment on a disc  
: Tapping one of them can switch on between  
the speed levels of fast backward or forward.  
: Tapping it can pop up the AUDIO interface of  
the SET Menu as right. In the interface, you can  
adjust the levels of VOLUME, BASS, TREBLE,  
BALANCE and FADER; can turn on or off LOUD,  
DBAS and MBP; can select your desired EQ mode.  
that you define:  
1. Press the A-B button at a point (A) where you want it to be the start point  
of the repeat segment. Press the A-B button again at a point (B) where you  
want it to be the terminal point of the repeat segment. Then it will play the  
segment repeatedly.  
SET Menu-1  
Tapping  
icon can pop up the TFT VIDEO inter-  
2. To cancel the A-B repeat mode and resume normal playback, press the A-B  
face of the SET Menu as right. In the interface,  
you can adjust the levels of BRIGHTNESS, CON-  
TRAST, COLOR and HUE; you can also adjust  
Transparency by tapping USER, STDY , BRIG,  
SOFT and SHAR.  
button for the third time.  
Note:  
During VCD/MP3/WMA/CD playback, points A and B must be within the  
same track.  
Tapping EXIT icon can exit the SET Menu.  
SET icon = SEL button.  
*
During DVD playback, points A and B can be selected from different chapters.  
SET Menu-2  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  
2. Press the direction buttons to select your desired title, and then press the OK  
or PLAY button to open the root menu of the selected title.  
4.2 Pause Playback  
In the state of DVD/VCD/CD/MP3/WMA playing, press the PAUSE  
button on IR remote control to pause the playback, press the PLAY  
button to resume normal playback.  
3. Press the direction buttons to select your desired chapter, finally press the  
OK or PLAY button to play the selected chapter.  
During playback, pressing the MENU button can directly display the root  
menu of the title that is playing.  
4.3 Stop Playback  
In VCD mode  
In the state of DVD/VCD/MP3/WMA/CD playing, press the STOP button  
once to pause the playback, then press the PLAY button to resume the normal  
playback; press the STOP button twice to full stop the playback, then press  
the PLAY button to start playback from the beginning of the first chapter/track.  
1. When starting to turn on the PBC function, it will play from the beginning of  
the disc till it display the PBC menu on TV screen if the disc include the PBC  
menu.  
2. Press the number buttons to select your desired track to play.  
In MP3/WMA mode  
4.4 Select Chapter/Track with the >>| / |<< Button  
Press the >>| / |<< button during playback to select the next or last chapter/  
track to playback.  
1. The root menu is displayed on the monitor screen all the time(and the TITLE  
or MENU button is not available).  
Note: Press the >>|/|<< button multiple times to advance multiple chapters/  
tracks forward or backward.  
2. Press the direction buttons to select your desired FOLDER, then press the  
OK or PLAY button to open the FOLDER, and then press the direction buttons  
to select your desired file, finally press the OK button to play the selected file.  
4.5 Select Chapter/Track with the Number Buttons  
In CD mode, the TITLE, PBC, MENU buttons are disabled.  
In the state of DVD/VCD(PBC OFF)/MP3/WMA/CD playing, press one  
of the 1~9 and the 0/10 number buttons to directly select and play the 1st to  
10th track/chapter (the 0/10 button is used as the 10 button).  
4.7 Playback with Speed  
If you want to play the track/chapter that s serial number is bigger than 10,  
use the 10+, 1~9 and 0/10 button. For example 1, to play the 13th track/  
chapter, firstly press the 10+ button once, then press the 3 button. For  
example 2, to play the 34th track/chapter, firstly press the 10+ button for 3  
times, then press the 4 button.(the 0/10 button is used as the 0 button)  
During normal playback, long press the >>|/|<< button on the remote control  
continuously to fast forwards or backwards at the following speeds: x2, x4,  
x8, x20, normal.  
During speed playback, press the PLAY button to resume normal playback.  
Note: long pressing the +10 or -10 button can play the next 10 or last 10  
chapter/track(only for MP3/WMA/CD).  
4.8 Playback with Slow Speed  
4.6 Select Chapter/Track with the Root/PBC Menu (If the disc includes the  
root/PBC menu)  
During playback , press the SLOW_FWD button to execute the Slow Forward  
function.  
In the state of DVD playing  
With each consecutive pressing of the SLOW_FWD button, the playback  
speed decreases. The speed levels in Slow Forward as follows:  
x1/2,x1/3,x1/4,x1/5,x1/6,x1/7,normal.  
1. Press the TITLE button on the remote control to display the title list.  
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com  

RCA DRC69702 User Manual
Precor C842 User Manual
Polk Audio R Series Loudspeakers R50 User Manual
Panasonic Lumix DMC FZ47 User Manual
O&#39;Brien Hammerhead 2 2091512 User Manual
Metra Electronics 95 7866B User Manual
Magic Chef MCWC50DBT User Manual
Listen Technologies DCN LA 334 User Manual
LG Electronics LG Lifes Good Car Video System M2362D User Manual
Kalorik Team International Group Blender usk bl 25161 User Manual