PYLE Audio Mobile Video System PLD41MUT User Manual

PLD41MUT  
OWNER'S MANUAL  
Mobile Video System  
-
+
Motorized Slide Down And Detachable Panel  
4 Inch Wide Color Digital Screen TFT  
Car DVD/VCD/CD/MP3 Player/TV Tuner  
AM/FM Digital Pll Tuning Radio  
MPEG4 Player  
USB Connect  
Remote Control  
SAFETY INFORMATION  
CAUTION:  
THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD  
PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .  
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE  
THE DVD PLAYER CORRECTLY AS INSTRUCTED.  
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT  
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.  
WARNING:  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS  
EQUIPMENT TO RAIN OR MOISTURE.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING  
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.  
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.  
This product incorporates copyright protection technology that is protected  
by method claims of certain U.S. Patents and other intellectual property rights  
owned by Macrovision Corporation and other rights owners.Use of this  
copyright protection technology must be authorized by Macro vision Corporation,  
and is intended for home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
REGION MANAGEMENT INFORMATION:  
This DVD Player is designed and manufactured to respond to the Region  
Management Information that is recorded on a DVD disc. If the Region number  
described on the DVD disc does not correspond to the Region number of this  
DVD Player, this DVD Player cannot play this disc.  
2
DISC NOTES  
unusable) depending on your handle it  
and conditions in the usage environment.  
Note these scratches are not an  
Disc formats supported by this  
player  
DVD  
12 cm disc  
V I D E O  
indication of any problem with the player.  
Label side  
up  
(Single-sided disc only)  
Video CD  
12 cm disc  
CD  
Do not touch  
the  
underside  
of the disc  
12 cm disc  
MP3  
12 cm disc  
MP3  
CD-RW  
Do not  
bend  
Discs which cannot be played  
with this player  
DVD-ROM  
DVD-R/DVD-RAM  
CDV  
Wipe the disc from  
center  
toward the outside  
edge  
CD-G  
Handling and Cleaning  
Dirt, dust, scratches and warping disc  
will cause misoperation.  
Do not place stickers or make  
scratches on discs.  
Preparing New Discs with Rough  
Spots  
A new disc may have rough edges on  
its inside and outside edges.If a disc  
with rough edges is used, the proper  
setting will not be performed and the  
player will not play the disc.Therefore,  
remove the rough edges in advance  
by using a ball point pen or pencil as  
shown on the right.To remove the  
rough edges, press the side of the pen  
or pencil against the inside and outside  
edges of the disc.  
Do not warp discs.  
A disc should always be kept in its  
case when not in use to prevent from  
damaging.  
Do not place discs in the following  
places:  
1.Direct sunlight  
2.Dirty, dusty and damp areas  
3.Near car heaters  
4.On the seats or dashboard  
Rough spots  
on  
outside edge  
Disc Cleaning  
Use a dry soft cloth to wipe the surface.  
If the disc is quite dirty, use a soft cloth  
slightly moistured with isopropyl (rubbing)  
alcohol. Never use solvents such as  
benzine, thinner or conventional record  
cleaners as they may mar the surface of  
the disc.  
Ball point pen  
or pencil  
Rough spots  
on inside  
edge  
Note:  
A disc may become somewhat scratched  
(although not enough to make it  
3
INSTALLATION  
NOTES:  
Choose the mounting location where the unit will not interfere with the normal  
driving function of the driver.  
Before finally installing the unit, connect the wiring temporarily and make sure  
it is all connected up properly and the unit and the system work properly.  
Use only the parts included with the unit to ensure proper installation. The use  
of unauthorized parts can cause malfunctions.  
Consult with your nearest dealer if installation requires the drilling of holes or  
other modifications of the vehicle.  
Install the unit where it does not get in the driver's way and cannot injure the  
passenger if there is a sudden stop, like an emergency stop.  
If installation angle exceeds 30 from horizontal, the unit might not give its  
optimum performance.  
30  
Avoid installing the unit where it would be subject to high temperature, such  
as from direct sunlight, or from hot air, from the heater, or where it would be  
subject to dust, dirt or excessive vibration.  
DIN FRONT/REAR-MOUNT  
This unit can be properly installed either from "Front"(conventional DIN  
Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded  
screw holes at the sides of the unit chassis). For details, refer to the following  
illustrated installation methods.  
4
INSTALLATION  
DASH BOARD  
HEX NUT  
METAL MOUNTING  
STRAP  
SPRING WASHER  
PLAIN WASHER  
TAPPING SCREW  
CONSOLE  
SLIDE BRACKET  
HOUSING  
HEX BOLT  
KEY PLATE  
PLASTIC COVER  
KEY PLATE  
If you want to take CHASSIS out of the SLIDE BRACKET HOUSING,  
first remove the PLASTIC COVER of the both sides away, then insert  
the two KEY PLATE into left and right side of chassis as above illustration.  
5
INSTALLATION  
How To Remove And Install The Front Panel  
When detaching or attaching the control panel, be careful not to damage the  
connectors on the back of the control panel and on the panel holder.  
Detaching The Front Panel  
Before detaching the control panel, be sure to turn off the power.  
1.Press the release button and the left hand side of the front panel will release.  
(FIG. 1)  
2.Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG. 3)  
Install The Front Panel  
First insert the right hand side of the front panel into the housing of the unit , then  
push the left hand side of the front panel and make sure the panel is properly  
installed(FIG.4),and then press the PWR button (2) briefly to switch the device ON.  
FRONT PANEL  
FRONT PANEL  
RELEASE BUTTON  
FIG.1  
PROTECTIVE CASE  
FIG.2  
Installing The Front Panel  
FRONT PANEL  
FIG.4  
FIG.3  
6
CHAGNE ANGLE  
CHANGING THE CONTROL PANEL ANGLE  
When you want to change the viewing angle of the operating unit to play,  
you can press the  
as follows:  
(angle)button repeatedly to select the desired angle  
Angle 1  
Angle 2  
Angle 4  
Angle 3  
Caution:  
Do not insert your finger behind the control panel.  
7
ELECTRIC CONNECTION  
WIRING CONNECTION  
MAIN UNIT  
(B+)12V  
REAR CAMERA SWITCH  
WHITE  
GREEN  
(B-)PARKING BRAKE  
TV ANT IN  
YELLOW  
REAR CAMERA INPUT  
AUX(optional)  
VIDEO IN YELLOW  
RCH IN RED  
ANTENNA CONNECTOR  
LCH IN WHITE  
RCA CABLE  
GREY SUBWOOFER  
VIDEO OUT 2 YELLOW  
IGNITION RED  
SWITCH(B+)  
COAXIAL OUT BROWN  
RCH RED  
REAR RCA OUTPUT  
CABLE (optional)  
CHOKE  
BOX  
MEMORY  
BACK-UP(B+)  
YELLOW  
BLACK  
LCH WHITE  
FRONT RCA OUTPUT  
CABLE  
FRONT RCA RED  
VIDEO OUT 1 YELLOW  
FRONT RCA WHITE  
R
GROUND(B-)  
L
(FOR RCA LINE OUT VERSION ONLY)  
FUSE  
AUTO  
ANTENNA  
BLUE  
GREY  
WHITE  
FRONT  
FRONT  
Rch SPK.  
Lch SPK.  
WHITE/BLACK  
GREY/BLACK  
VIOLET  
REAR  
GREEN  
REAR  
Rch SPK.  
Lch SPK.  
GREEN/BLACK  
VIOLET/BLACK  
Note:  
the earth connection cable (parking brake B-) must be connected in order for DVD  
pictures to be played back to the monitor. If the cable has not been correctly  
connected, the message “PARKING BRAKE” appears on the monitor.  
8
REMOTE CONTROL  
15  
16  
3
17  
7
5
1
19  
2
13  
20  
21  
22  
6
23  
12  
14  
24  
18  
9
25  
11  
10  
26  
4
8
Press it to change the display to clock display.  
Press it to change between TV, RADIO ,DISC and AUX IN mode.  
Press it to stop playback.  
1.CLK  
2.MODE  
3.STOP  
4.SETUP  
5.MO/ST(AUDIO)  
Display the SETUP menu.  
In radio mode, press it to select STEREO or MONO mode (In disc  
mode, press it to changing of the AUDIO soundtrack on multi-  
audio soundtrack DVD disc. Changing of the sound mode of the  
VCD/CD disc)  
Changing of the SUBTITLE language on multi-subtitle language  
DVD disc. In radio mode,.Press this button for distance reception  
when you are located at weak signal location, depress it for  
stronger signal.  
6. SUBTITLE  
LO/DX  
Switch the Repeat mode of DVD/VCD/CD/MP3 disc.  
Disc search button, cooperatively used with numeric buttons  
7.REPEAT  
8.GOTO  
Press  
to skip to the next track & press  
to skip back one track.  
9.  
/
(Note:In DVD mode, press continually the twice to skip back one track.)  
Press it repeatedly to change mode through volume , bass, treble,  
balance , fader, color, bright, contrast and tint modes.  
Press it to adjust volume level  
10.SEL  
11. VOL+/VOL-  
/
Cursor buttons in MENU mode. Note: For models without built-in  
12.  
/
/
FM Modulator, the  
control. In TV mode, press  
to select channel upward and downward.  
/
buttons can be used for volume up/down  
/
to fine tune. Press the  
/
Press it to display the root menu of the DVD disc. Press it long to switch  
the Subwoofer ON and OFF.  
Display statistical disc information during playback (To change  
the band in radio stations)  
13.MENU  
SUB WOOFER  
14.BAND(OSD)  
Press it to turn on the unit ,press it again to turn off.  
Press once to pause a play, press again to resume playback.  
Press it to mute down sound.  
15.POWER  
16.PLAY/PAUSE  
17.MUTE  
Display the TITLE menu that is stored in DVD disc changing  
between PBC ON and PBC OFF on the VCD disc.(Auto store  
and preset scan function in radio stations .)  
18.TITLE/PBC  
(A/P)  
Press it to change the view angle.  
Changing of the view angle on multi-angle DVD disc.  
Press it to turn to equalization function.  
In TV mode, Press it to search TV channel automatically.  
In DISC mode, Press it to start forward rapidly.  
Confirm the Track/Chapter selected with the number key or  
selected with the cursor buttons on TV screen.  
In TV mode, press it to ADD and DELETE channel .  
In DISC mode, press it to reverse rapidly  
19.  
20.ANGLE  
21.EQ  
22.SEARCH  
23.ENTER  
24.SKIP  
Numeric buttons.  
Tens digit select button, cooperatively used with numeric buttons.  
25. 0 - 9  
26.+10  
9
REMOTE CONTROL  
Preparing the Remote Control  
Inserting the Batteries  
1.First push to inside as the direction indicated by the arrow (See  
1
)And then  
).  
Remove the battery holder as the direction indicated by the arrow (See  
2
2.Replace the battery Set a new battery property with (+)side up as illustrated  
(See ).  
3
4
3.Insert the battery holder. Push in the holder to the original position(See  
).  
Using the Remote Control  
Face the remote control towards the player front face IR mark (remote control signal  
receiver).  
Operation angle: About 30 degree in each the direction of the front of the IR mark.  
10  
BASIC OPERATION  
1
3
17 16  
20  
6
12 14  
13  
11  
VOL-  
8
SEL  
4
5
VOL+  
18  
9
10  
19  
7
15  
2
1.REL BUTTON  
Press the REL button to detach the removable front panel.  
2.PWR On/Off BUTTON  
Press this button to switch the device On, WELCOME appears in the display.  
Press it again to switch the device Off, SEE YOU appears in the display.  
3-4.VOL+/VOL- & SEL BUTTON  
Press SEL(4) button briefly to across the sound/picture mode selection menu  
by repeatedly pressing the SEL button you can select the individual menu items  
such as volume, bass, treble, balance, fader, color, bright, contrast and tint .  
Then rotate the VOL + / - to adjust the selected mode.  
(The corresponding value will show on the display.)  
When mode has not been adjusted for several seconds, display returns to normal  
radio or CD display.  
Volume  
Bass  
Treble  
Balance  
Fader  
Tint Contrast  
Bright  
Color  
A.Volume:Adjust volume level by using VOL + / - button.  
Note: The unit is initially set to volume mode.  
B.Bass:Press SEL button one time. Adjust bass level by using VOL + / - button.  
C.Treble:Press SEL button two times. Adjust treble level by using VOL + / -button.  
D.Balance:Press SEL button three times. Adjust sound balance between left  
and right speakers by using VOL + / VOL - button.  
E.Fader:Press SEL button four times. Adjust sound balance between front and  
rear speakers by using VOL + / VOL - button.  
(NOTE: the function of the Color, Bright, Contrast and Tint. Please see 16 page.)  
5. BND BUTTON  
In RADIO mode, press the BAND button on the front panel or on the remote  
controller to select your desired radio band and word which band is selected  
will be displayed in the TFT . Press it to change the bands as below :  
FM  
MW  
LW  
FM  
MW  
FM  
AM  
For 3 Bands (Europe)  
For 2 Bands (Europe)  
For 2 Bands (USA)  
11  
BASIC OPERATION  
6. EQ BUTTON  
Swing the SEL knob briefly in the EQ direction to turn to equalization function  
and to select desired audio mode. There are five kinds of mode as below:  
JAZZ  
CLAS  
POP  
ROCK  
FLAT  
7. APS/DISP BUTTON  
In Radio Mode:  
a) Memory function:  
swing the SEL knob in the direction of APS/DISP for approximately 2 seconds  
to active automatic station storage. The radio searches within the current  
frequency band, e.g. FM1, for the strongest station are then allocated to the  
corresponding storage locations. Then the station of the first storage location  
is set. If you would like to search for more stations in the FM band, press the BND  
button(5) in order to change to the FM2 or FM3 band. Swing the SEL button (4)  
again in the APS/DISP direction for about 2 seconds to continue search.  
b) Scan Function:  
if the SEL knob is moved briefly in the direction of APS/DISP, the radio briefly  
plays all the preset stations of the frequency band. (The scan function ends  
automatically at the first storage location of frequency band FM1.)  
In Disc Mode:  
swing the SEL knob briefly in the direction of the APS/DISP on the front panel ,  
the playback picture (the monitor on the unit only) will not to be shown, only the  
audio will be heard. (Swing it again to resume the playback picture mode.) You  
can press SEL knob briefly to select the “BG COLOR” by repeatedly pressing the  
SEL knob, then rotate the VOL+/- to select the background color among of the  
“AUTO, BG COLOR: 01........BG COLOR: 11”, in “ AUTO” mode, the monitor of  
unit will change the background color automatically  
In TV Mode  
you can press SEL knob briefly to select the TV system by repeatedly pressing  
the SEL knob, then rotate the vol+/- to select the TV type (only in EUR frequency  
mode) among of the “PAL-BG”, “PAL-DK”, “PAL-I”,“PAL-MN” ..  
8. MU BUTTON  
Press it button to switch of the loudspeakers for a short period. The word MUTE  
flashes in the display. Press it again to cancel the mute function. This function  
can also be cancelled by rotating the VOL multifunction button.  
9.  
(ANGLE)BUTTON  
you can change the viewing angle of the operating unit . Press this button up to  
four times in order to select the desired position.  
10.CLK BUTTON  
Press it to change the display to clock display. Press it again to return to previous  
display. In clock display, press and hold for about 2 seconds until the hour display  
flashes. Rotate the VOL+/- to adjust hours , press CLK button to flash minute  
then use VOL+ /VOL- to adjust minutes.  
11.  
BUTTON  
button to interrupt playback of the CD (pause function). Press this  
button again to cancel this function.  
Press the  
12  
BASIC OPERATION  
12.  
/
a) In DISC, USB mode:  
BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)  
if you wish to jump forwards or backwards press the SEL button (4) briefly in  
the or direction. (Note: in DVD mode, press the SEL button continually  
twice in direction to skip back one track during playback.)  
Note:For some VCD 2.0 dics(PBC-playback control),  
be unavailable.  
and  
buttons may  
To wind through the tracks keep the SEL button pressed in the or direction  
for about 2 seconds. FF X2 appears in the display. Operating the SEL button  
again, the speed of rapid forward/reverse changes according to the disc  
as follow:  
Normal Playback 2x  
4x  
8x  
16x  
DVD/VCD/CD/MP3:  
b) In Radio Mode:  
Move the SEL button in the direction of  
or  
in order to set a radio station  
or direction in order to  
manually. Keep the SEL taste pressed down in the  
start the search for a radio station automatically.  
13. MOD BUTTON  
Press it repeatedly to select TV, AUX IN , RADIO and DISC mode.  
During the USB playback, you can press STOP button and then press GOTO  
button to select the DISC mode.  
14.  
(EJECT) BUTTON  
Press this button to insert and eject the Disc . The operating unit swings down-  
wards. Insert the Disc with the labelled side facing upwards gently into the CD  
slot until the device draws in the CD/DVD automatically. The operating unit will  
automatically swings back to the normal position.  
15.MENU BUTTON  
Press it to display the root menu of the DVD/VCD(Only when PBC not in use) disc.  
16. RET(RESET) BUTTON  
RESET button is placed on the housing and must be activated with either a  
ballpoint pen or thin metal object. The RESET button is to be activated for the  
following reasons:  
A. Initial installation of the unit when all wiring is completed.  
B. All the function buttons do not operate.  
C. Error symbol on the display.  
17. IR (infrared)  
Sensor for the remote control.  
18. AUX IN SOCKET  
The operation of the AUX , please see page 15.  
13  
BASIC OPERATION  
TOP/RPT/INT/RDM FUNCTION (Only for the RC.)  
A.To memorize the current frequency, press any one of the six preset buttons[1-6]  
on the remote controller hold for more than 2 seconds.  
B.To recall the preset memory, press one of the preset buttons [1-6].  
C.Press 1/TOP button to select the first track/chapter to play.  
a. In the state of VCD/CD/MP3 disc playing, press the button to select the  
first track/chapter to play.(depend on the disc used for VCD)  
b. In the state of DVD disc playing, the 1TOP button is not available.  
D.Press REPEAT button briefly to select repeat mode as follow.  
VCD/CD/MP3:  
REP-ONE  
DVD:  
CHAPTER REPEAT ON  
TITLE REPEAT ON  
REP-ALL  
REPEAT ALL  
a. Continuously repeat at the current chapter/track, when selected  
REP-ONE mode.  
b. Select REP-ALL mode to continuously repeat all chapter/track on the  
current disc.  
c. REPEAT feature does not support VCD2.0 (with PBC ON).  
E.Long Press 3/INT button to scan disc.  
a. In the state of CD disc playing,press the 3/INT button to play the previous 6  
seconds part of each track/chapter on disc.  
b. In the state of Mp3 disc playing, the 3/INT button is not available.  
c. In the state of VCD disc playing , long press the 3/INT button, the screen will  
display as follow (long press it again will release this mode.):  
SELECT DIGEST TYPE:  
TRACK DIGEST  
DISC INTERVAL  
TRACK INTERVAL  
/
/
/
1). you can use the  
and then press the ENTER button to confirm .  
2). In Track Digest OR Disc/Track Interval MODE.  
You can use the buttons to select the items ,and then press the  
ENTER to confirm .  
buttons on the remote control to select the item,  
/
/
/
You can also select the items using the corresponding number buttons, and  
then press the ENTER to confirm .  
d. In the state of DVD disc playing , long press the 3/INT button, the screen will  
display as follow (long press it again will release this mode.):  
SELECT DIGEST TYPE:  
TITLE DIGEST  
CHAPTER DIGEST  
TITLE INTERVAL  
CHAPTER INTERVAL  
1). you can use the  
and then press the ENTER button to confirm .  
2). In Title/Chapter Digest OR Title/Chapter Interval MODE.  
You can use the buttons to select the items ,and then press the  
ENTER to confirm .  
buttons on the remote control to select the item,  
/
/
/
/
/
/
You can also select the items using the corresponding number buttons, and  
then press the ENTER to confirm .  
F. Long Press 4/RDM to play disc in random.  
In the DVD/VCD/CD/MP3 disc playing, press the 4/RDM button on the front  
panel to play in random (depend on the disc used for VCD).  
14  
BASIC OPERATION  
MP3/WMA/JPEG DISC PLAY  
1.When inserting an MP3/WMA/JPEG disc. Ex: When Mp3 file is detected.  
4
5
6
1 .Current track(file)(highlighted bar)  
.Current track (file) number/total  
number of tracks(files) in the current  
folder.  
2
00:56  
04:07  
3
2
Repeat one  
003/112  
.Elapsed playing time of the current  
track(not available for JPEG disc)  
.total playing time.( not available for  
JPEG disc)  
3
4
Mp3  
K
P
Mp3  
Mp3  
1
woman 1  
ton  
.Selected playback mode  
.Operation mode icon.  
5
6
..........n..e.w.  
(Play),  
(stop), (pause), (forward)  
(reverse).  
on the remote control to select the item or folder,  
In stop mode , use  
/
then press ENTER button to confirm.  
Pressing REPEAT button repeatedly can select two kinds of repeat play mode.  
2.REP-ONE:  
Play the same song over and over again.  
3.REP ALL:  
Play all songs in the discover and over again.  
In the playback, use  
or  
to skip an item ahead or back.  
In the playback, face right or left swing the SEL knob  
panel and keep more than 2 seconds or short press  
to rapid forward/reverse.  
/
button on the front  
on the remote control  
/
AUX IN Socket ( 18 )  
To connect analogue replay devices. Use this jack to replay sound of other replay  
equipment such as DVD players, computers, etc. Via the loudspeakers.  
1). Please connect the external device with stereo jack plug the AUX IN socket.  
2). Press the MOD button(13) to select the AUX IN connection.  
3). Rotate the VOL+/- button (3) you can change the volume level.  
ALTERNATE AUDIO/VIDEO SOURCE  
To connect analogue replay devices. Use this jack to replay sound of other replay  
equipment such as DVD players, computers, etc. Via the loudspeakers. (See fig.1)  
1).Please connect the external device with stereo jack plug the Aux In socket(18).  
2).Press the MOD button to select the AUX IN connection.  
3).With the buttons on the external device to operate the item of the playing.  
Headphones  
port  
( fig.1)  
( connect cable)  
15  
BASIC OPERATION  
TFT MONITOR OPERATION  
Press SEL(4) button briefly to across the sound/picture mode selection menu  
by repeatedly pressing the SEL button you can select the individual menu items  
such as volume, bass, treble, balance, fader, color, bright, contrast and tint .  
Then rotate the VOL + / - to adjust the selected mode.  
(The corresponding value will show on the display.)  
When mode has not been adjusted for several seconds, display returns to normal  
radio or CD display.  
Volume  
Bass  
Treble  
Balance  
Fader  
Tint Contrast  
ADJUSTABLE ITEMS:  
COLOR: 0 to 32  
Bright  
Color  
Adjust the color fo the picture-lighter or darker.  
BRIGHT: 0 to 32  
Adjust if the picture is too bright or too dark.  
CONTRAST: 0 to 32  
Adjust the contrast of the bright ans dark portion.  
TINT: 0 to 32  
Adjust the tint if the human skin color is unnatural.  
-Adjustable when “NTSC “ is selected for “NTSC/PAL “ .  
(The function of the VOLUME, BASS, TREBLE, BALANCE and FADER, Please  
see page 11.)  
REAR VIEW CAMERA  
When connecting the rear view camera.the mirror image of the rear view through  
the rear view camera is automatically displayed on the monitor when you change  
the gear to the back position.(The monitor on the unit only.)  
NOTE(for the brake function)  
if the parking brake is not engaged,“parking brake” flashes on the monitor,  
and no playback picture will be shown. Only the audio will be heard.  
-This warning appears only when the parking brake wire is connected to the parking  
brake system built in the car. (See page .8)  
MPEG4 DISC PLAY  
MPEG4 disc is playing as the format  
00:56  
04:07  
Repeat one  
of FILE . For example:  
In stop mode , use  
001/001  
/
on the  
remote control to select the item ,  
then press ENTER button to confirm.  
Pressing REPEAT button repeatedly can  
select three kinds of repeat play mode.  
REP-ONE:  
MAY-AUG  
C14-Long-fright  
..............  
Play the same song over and over again.  
REPEAT ALL:  
Play all songs in the current directory in sequence, over and over again.  
DISC REPEAT:  
Play all songs in the discover and over again.  
In the playback, use  
In the playback, face right or left swing the SEL knob  
and keep more than 2 seconds or short press  
forward/reverse.  
or  
to skip an item ahead or back.  
button on the front panel  
on the remote control to rapid  
/
/
16  
BASIC OPERATION  
USB Operation  
On-Screen Display Function  
Press the OSD button during playback  
to display the contents of the current  
disc on the screen.  
A.Example for DVD:  
a.Press OSD for the first time:  
A.Plug the USB connect line to the USB  
socket (see number 19) of the unit  
properly,(See fig.1) when the USB  
appliance connect to the USB port of  
the connect line, the system star  
playing track of the USB appliance  
automatically.  
TITLE ELAPSED  
TT 01/01 CH 01/38  
0:02:06  
B. IN USB playing , you can press the  
cursor button to select the item.Then  
press ENTER button to playing.  
also press numeric to play the  
Title Number, Total Title Number,  
Chapter Number, Total Chapter  
Number of this Title of the disc  
currently being played will be shown  
on the screen,along with the elapsed  
time.  
corresponding track directly. Press  
the  
track or skip to the back one track  
Press the button to fast forward  
or fast reverse.  
/
button to skip to the next  
b.Press OSD for the second time:  
/
TITLE REMAIN  
TT 01/01 CH 01/38 3:24:36  
Press the REPEAT button to select  
repeat play mode.  
You can press the EJECT button to  
eject the disc or insert the disc into  
the compartment.  
When insert the disc, the unit will  
play the disc automatically .  
C.In USB mode(when the disc in the unit)  
Press the STOP button once , and  
then press the GOTO button, the unit  
will change the DISC mode to play,  
In DVD/VCD/CD mode,  
c.Press OSD for the third time:  
CHAPTER ELAPSED  
TT 01/01 CH 01/38 0:02:56  
d.Press OSD for the fourth time:  
CHAPTER REMAIN  
TT 01/01 CH 01/38 0:04:32  
e.Press OSD for the fifth time:  
The message on the screen will be  
cleared.  
Press the STOP button twice, and  
then press the GOTO button, the unit  
will change the USB mode to play  
In MP3 mode,  
B.Example for VCD/SVCD/CD:  
a.Press OSD for the first time:  
press the STOP button once, and  
then press the GOTO button, the unit  
will change the USB mode to play.  
Note:  
SINGLE ELAPSED  
TRACK 01/16  
00:49  
a:To prevent damage to the USB ,  
during the playback don`t pull out.  
b.Press OSD for the second time:  
SINGLE REMAIN  
b:In the state of the DISC playing ,  
Best to pull out the USB.  
TRACK 01/16  
02:45  
c.Press OSD for the third time:  
TOTAL ELAPSED  
TRACK 01/16  
00:60  
USB port  
d.Press OSD for the fourth time:  
TOTAL REMAIN  
(USB connect line)  
TRACK 01/16  
78:46  
(Fig.1)  
17  
BASIC OPERATION  
Notes:  
- The language number is different  
according to the disc.  
- Some discs only contain one subtitle  
language.  
- When no different subtitle language  
e.Press OSD for the fifth time:  
The message on the screen will be  
cleared for SVCD and VCD.  
C.Example for MP3:  
Each time OSD is pressed, the  
message displayed on screen changes  
as follows:  
are recorded, will be displayed  
at screen left top corner.  
SINGLE ELAPSED  
SINGLE REMAIN  
Multi-angle Function  
Multi-audio Language Function  
For DVD:  
Press AUDIO during playback.  
Each time the button is pressed,  
number of the audio soundtrack  
language changes on sequential order.  
NOTES:  
(for DVD Only)  
Press ANGLE during playback. Each  
time the button is pressed, number of  
the angle changes in sequential order.  
Notes:  
- The angle number is different  
according to the disc.  
- The function only work for disc having  
scenes recorded at different angles.  
- When no different angle are recorded,  
will be displayed at screen left top  
corner.  
- The language number is different  
according to the disc.  
- Some disc only contain one language  
soundtrack  
- When no different language  
soundtrack are recorded  
will be  
display at screen left top corner.  
For VCD/CD:  
Press AUDIO during playback. It is  
possible to switch the sound between  
monaural and stereo sound.  
TV Operation  
Switching to TV mode  
1.Connect the TV antenna to the TV.IN  
(from Ant) jack on the back of the unit.  
2. Press the mode button on the remote  
control to select the TV mode.  
Auto searching TV channels  
Press the SEARCH button on the remote  
controller to star search channel  
automatically.  
MONO LEFT  
MONO RIGHT  
MIX-MONO  
STEREO  
Title Menu Function  
For DVD:  
If the DVD has multiple titles recorded  
on the disc. It can select preferred title  
from the title menu to start playback.  
- Press TITLE during playback.The title  
menu is display.  
- Press the cursor button shown in TV  
screen, select preferred title by the  
cursor button and confirmed by  
ENTER key.  
Selecting channel  
- Press the  
/
button to choose the  
channel upward and downward.  
- The numeric button (0-9) allow you to  
select the corresponding channel directly.  
Note:  
In TV mode, the +10 button is not available.  
Fine TV channel  
You can press  
/
button on the remote  
For VCD:  
controller to fine TV channel. It can be  
improve the picture quality .  
Channel ADD/DEL  
In TV mode ,after search channel  
automatically, when you want delete the  
no sign channel, press the SKIP button (the  
screen display SKIP),the channel will be  
deleted. Also, you can press numeric button  
to select channel, then press SKIP to add  
channel(the screen display SAVE).  
Press TITLE/PBC button on the remote  
control while the disc is playing, you can  
switch between "PBC on"and "PBC off"  
mode.  
Multi-subtitle Language Function  
(for DVD Only)  
Press SUBTITLE during playback.  
Each time the button is pressed, number of  
the subtitle language changes in  
sequential order.  
18  
SETUP  
GENERAL SETUP  
--- GENERAL PAGE ---  
DOLBY  
DOLBY  
-----General setup page----  
-----General setup page----  
TV Display  
Normal/PS  
Normal/LB  
Wide  
TV Display  
LB  
ON  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
ENG  
SPDIF/RAW  
ON  
Screen Saver  
Last Memory  
Screen Saver  
Last Memory  
ON  
ON  
Set TV Display Mode  
Go To General Setup Page  
TV Screen  
Video  
Material  
1. Press SETUP button on the remote  
control .  
Wide(16:9)  
Pan Scan  
Normal  
Letter-box  
4:3  
2.The SETUP menu is displayed.  
3.Select the preferred item by using the  
/
/
/
buttons  
4.Press ENTER button.  
a.GENERAL SETUP  
1.TV DISPLAY SETUP  
This setup page includes the item  
of TV display & audio output feature.  
The detail please refer to  
This is to select the appropriate TV  
aspect (4:3 or 16:9) according to the  
connected TV set.  
GENERAL SETUP MENU.  
b.SPEAKER SETUP  
Normal/PS (For 4:3 TV)  
Played back in the PAN & SCAN style.  
(If connected to wide-screen TV, the  
left and right edges are cut off.)  
Normal/LB (For 4:3 TV)  
This is to activate the audio output  
from DOLBY AC3 5.1 DOWNMIX  
to 2 channel mode. Please refer to  
SPEAKER SETUP MENU.  
c.DOLBY DIGITAL SETUP  
Please refer to DOLBY DIGITAL  
SETUP.  
Played back in letterbox style.  
(If connected to wide-screen TV, black  
bands appear at top and bottom of the  
screen.)  
d.PREFERENCE SETUP  
This setup page includes all the  
configuration of support feature.  
The detail please refer to  
Wide (For 16:9 TV)  
Select when a wide-screen TV set is  
connected.  
PREFERENCES SETUP MENU.  
19  
SETUP  
DOLBY  
DOLBY  
-----General setup page----  
TV Display  
-----General setup page----  
TV Display  
ON  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
Angle Mark  
Osd Lang  
OFF  
SPDIF OFF  
SPDIF/RAW  
SPDIF/PCM  
Spdif Output  
Captions  
Screen Saver  
Last Memory  
Set Angle Mark  
Screen Saver  
Last Memory  
Setup SPDIF  
2.ANGLE MARK DISPLAY SETUP  
If it is set to ON, when the multi-angle  
4.SPDIF OUTPUT  
This is to activate the audio output  
from SPDIF OFF mode to SPDIF/RAW  
mode to SPDIF/PCM mode.  
DVD disc is playing,  
(the angle  
mark) will appears on the screen; if is  
set to OFF, the mark will not appear.  
DOLBY  
DOLBY  
-----General setup page----  
TV Display  
-----General setup page----  
TV Display  
English  
French  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
Angle Mark  
OSD Lang  
German  
Spanish  
Italian  
ON  
Spdif Output  
OFF  
Captions  
Screen Saver  
Last Memory  
Screen Saver  
Last Memory  
Closed Caption  
Portuguese  
Set OSD Language  
5.CAPTIONS SETUP  
3.OSD LANG TYPE SETUP  
Select the preferred OSD language  
Activate the CAPTIONS feature by  
selecting ON. And release this feat-  
ure by selecting OFF.  
by using the  
/
buttons.  
20  
SETUP  
SPEAKER SETUP  
--- SPEAKER SETUP PAGE ---  
DOLBY  
DOLBY  
-----General setup page----  
TV Display  
-----Speaker Setup Page----  
Angle Mark  
OSDLang  
Spdif Output  
Captions  
DOWNMIX  
LT/RT  
STEREO  
ON  
Screen Saver  
Last Memory  
Screen Saver  
OFF  
Set Downmix Mode  
This is to activate the audio output from  
DOLBYAC3 5.1 DOWNMIX to 2 channel  
mode. Select the preferred SPEAKER  
connection by using the cursor buttons.  
Select the LT/RT to activate the Dolby  
surround compatible output.  
6.SCR SAVER SETUP  
Select the SCR SAVER output  
ON/OFF.  
Select the STEREO to activate simple  
stereo mode.  
DOLBY  
DOLBY DIGITAL SETUP  
DOLBY  
-----General setup page----  
TV Display  
-----Dolby Digital Setup----  
Angle Mark  
OSD Lang  
Spdif Output  
Captions  
FULL  
6/8  
DYNAMIC  
4/8  
2/8  
ON  
Screen Saver  
OFF  
OFF  
Last Memory  
Set Last Memory State  
Set DRC OFF  
DYNAMIC RANGE CONTROL  
Select DRC and adjust the dynamic  
range of a Doby Digital encoded  
7.LAST MEMORY SETUP  
Select the LAST MEMORY output  
ON/OFF.  
program. There are 8 steps between  
full compression and off compression.  
21  
SETUP  
PREFERENCES SETUP  
--- PREFERENCES PAGE ---  
DOLBY  
DOLBY  
-----Preference Page----  
-----Preference Page----  
TV Type  
PAL  
TV Type  
English  
French  
Spanish  
German  
AUTO  
NTSC  
Audio  
Audio  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Italian  
Portuguese  
OFF  
Set TV standard  
Preferred Subtitle Language  
1.TV TYPE SETUP  
3.SUBTITLE LANGUAGE SETUP  
Select the preferred SUBTITLE  
language by using the cursor buttons.  
This player can play discs recorded  
in either PAL or NTSC format.Select  
NTSC format, when you connected to  
NTSC TV.Select PAL format, when  
you connected to PAL TV.Select AUTO  
format, the player TV output format  
will according to the DVD disc format..  
DOLBY  
DOLBY  
-----Preference Page----  
TV Type  
-----Preference Page----  
TV Type  
Audio  
English  
English  
Audio  
French  
Subtitle  
French  
Disc Menu  
Parental  
Password  
Default  
Spanish  
German  
Italian  
Subtitle  
Spanish  
Disc Menu  
German  
Parental  
Italian  
Portuguese  
Password  
Portuguese  
Default  
Preferred Menu Language  
Preferred Audio Language  
4.DISC MENU LANGUAGE SETUP  
Select the preferred DISC MENU  
language by using the cursor  
buttons.  
2.AUDIO LANGUAGE SETUP  
Select the preferred AUDIO sound-  
track by using the cursor buttons.  
22  
SETUP  
DOLBY  
DOLBY  
-----Preference Page----  
-----Preference Page----  
TV Type  
1KID SAF  
2G  
TV Type  
Audio  
Audio  
3PG  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Subtitle  
4PG13  
5PGR  
6R  
Disc Menu  
Parental  
Password  
Default  
7NC 17  
8 ADULT  
OFF  
RESET  
Load Fcatory Setting  
Set Parental Control  
7.DEFAULTS  
Select reset to become factory initial  
setting.  
5.PARENTAL  
Select suitable parental guidance by  
the cursor buttons and conformed by  
pressing ENTER button.  
DEFAULTS TABLE  
DOLBY  
TV DISPLAY  
NORMAL/LB  
ON  
-----Preference Page----  
TV Type  
ANGLE MARK  
OSD LANGUAGE  
ENGLISH  
SPDIF/RAM  
ON  
GENERAL SETUP  
Audio  
SPDIF OUPUT  
CAPTIONS  
Subtitle  
Disc Menu  
Parental  
SCR SAVER  
ON  
LAST MEMORY  
ON  
DOWNMIX  
SPEAKER SETUP  
DOLBY DIGITAL  
STEREO  
OFF  
Password  
Default  
CHANGE  
DYNAMIC  
TV TYPE  
AUDIO  
AUTO  
ENGLISH  
OFF  
Change Password  
SUBTITLE  
6.PASSWORD  
DISC MENU  
Select the change and press ENTER  
button. Type the old password (The  
initial factory code is 1379) and key  
in 4 characters password now you  
want to use, and retype again to  
confirm key in correctly.  
PREFERENCES  
ENGLISH  
8 ADULT  
1379  
PARENTAL  
PASSWORD  
23  
SPECIFICATION  
GENERAL  
Supply Voltage  
Current Consumption  
SIGNAL SYSTEM  
: 12v Dc (11v-15v)  
: More Then 10 A  
: Compositive Video 1.0vp-p 75  
DISCS PLAYED  
(1) Dvd-video Disc  
5"(12 Cm) Single-sided, Single-layer  
5"(12 Cm) Single-sided, Double-layer  
(2) Compact Disc (cd-da, Video Cd)  
5"(12cm) Disc  
AUDIO SIGNAL OUTPUT  
CHARACTERISTICS  
: 2ch&4ch Line Out  
(1) Frequency Response 20 Hz - 20 Khz  
(2) S/n Ratio  
90 Db (jis)  
(3) Wow And Flutter  
Below Measurable Limits  
RADIO  
FM TUNER SECTION  
Tuning Range  
: 87.5-107.9MHz  
: 10.7MHz  
IF Range  
Usable sensitivity(30dB)  
AM TUNER SECTION  
Frequency Range  
IF Range  
: 15dB  
: 530-1710KHz  
: 450KHz  
Usable sensitivity(30dB)  
: 45dB  
TV TUNER  
TV System  
TV Sensitivity  
: NTSC or PAL  
:
TFT MONITOR  
Monitor Screen Size  
Number of Pixels  
Color System  
: 4 Inch Wide  
: 480 x RGB x 272  
: NTSC/PAL  
NOTE:  
Specifications and design are subject to modification, without notice, due to  
improvements in technology.  
24  
TROUBLE SHOOTING  
Before going through the check list, check wiring connection. If any of the problems  
persist after check list has been made, consult your nearest service dealer.  
SYMPTOM  
CAUSE  
SOLUTION  
If the power supply is properly  
connected to the car accessory  
terminal,switch the ignition key  
to "ACC"  
The car ignition switch is  
not on  
No power  
The fuse is blown  
Replace the fuse  
Presence of disc inside the Remove the disc in the player,  
player.  
then put a new one  
Inserting the disc in reverse Insert the compact disc with  
direction  
Disc can not be  
loaded or ejected  
the label facing upward  
Clean the disc or try to play a  
new one  
The disc is extremely dirty  
or defective  
Temperature inside the car  
is too high  
Cool off or until the ambient  
temperature return to normal  
The color system is  
set incorrectly  
Television/video  
imageappears  
black-white  
Please switch to correct color  
system from menu  
Make proper connection  
The unit is not connected  
to the parking brake  
detection switch  
No television/video  
image appears  
according towire connection”  
For safety reasons no television  
/video images are displayed while  
the vehicle is moving.  
The parking brake is not  
engaged  
Engaging the parking brake will  
cause images to be displayed.  
Please the television mode of  
the choice accommodation  
The disc format is not  
accordingto the TV-set  
used (PAL/NTSC)  
No color in picture  
No JPEG files are recorded  
on the disc.  
JPEG disc can  
not be played  
back  
Change the disc  
Change the disc  
Record JPEG files using a  
compliant application  
JPEG files are not recorded  
in a compliant formant  
The built-in microcomputer Press the RESET button.  
is not operating properly  
due to noise  
The operation keys  
do not work  
Front panel is not properly fixed  
into its place  
The antenna cable is not  
connected  
The radio does not  
work  
Insert the antenna cable firmly  
The signals are too weak  
Select a station manually  
888-J4000-07S  
25  

Pioneer DEH P6600 User Manual
Panasonic SDR SW20P User Manual
Panasonic DMCGF3KK User Manual
Olympus CAMEDIA C480 User Manual
Olympus Camcorder X 880 User Manual
Nikon 9350 User Manual
Newcon Optik BDN 7x50 User Manual
Laney Amplification Car Satellite Radio System HCM160B User Manual
KitchenAid 4KFPM770NK1 User Manual
Kenwood KDC 4080R User Manual