Olympus X 940 User Manual

DIGITAL CAMERA  
FE-4040/FE-4020/X-940  
Instruction Manual  
Thank you for purchasing an Olympus digital camera. Before you start  
to use your new camera, please read these instructions carefully to  
enjoy optimum performance and a longer service life. Keep this manual  
in a safe place for future reference.  
We recommend that you take test shots to get accustomed to your  
camera before taking important photographs.  
In the interest of continually improving our products, Olympus reserves  
the right to update or modify information contained in this manual.  
The screen and camera illustrations shown in this manual were  
produced during the development stages and may differ from the  
actual product. Unless otherwise specied, the explanation about these  
illustrations is provided for FE-4040.  
Camera Settings  
Using the Direct Buttons  
Frequently used functions can be accessed using the direct buttons.  
Shutter button (p. 14)  
Zoom buttons (p. 16)  
qbutton (switch between  
shooting and playback) (p. 15)  
m button (p. 4)  
E button (menu guide) (p. 19)  
Arrow pad  
The symbols FGHI displayed for image  
selections and settings indicate that the arrow  
pad is to be used.  
F (up) /  
INFO button (change  
information display) (p. 16, 19)  
X
Y
M
D
TIME  
Y/M/D  
2010.02.26 12:30  
4/30  
H (left)  
I (right)  
MENU  
OK  
CANCEL  
SET  
14M  
NORM  
FILE  
100 0004  
’10/02/26 12:30  
H button  
(p. 12)  
OK  
PRINT  
MORE  
SINGLE PRINT  
G (down) /  
D button (erase) (p. 18)  
EN  
3
Using the Menu  
Use the menu to change camera settings such as the shooting mode.  
Press the m button to display the function menu. The function menu can be used to set frequently  
used shooting and playback functions such as shooting mode.  
Selected option  
Shooting  
Playback  
Shooting  
mode  
PROGRAM AUTO  
SLIDESHOW  
PERFECT FIX  
EDIT  
P
ERASE  
Function  
menu  
0.0  
WB  
AUTO  
ISO  
AUTO  
14M  
o [SETUP]  
SETUP  
4
menu  
To select the shooting mode  
Use FG to select a menu and press  
Use HI to select a shooting mode and press  
the H button.  
the H button.  
To select the function menu  
Use FG to select a menu and use HI to  
select a menu option. Press the H button to  
set the function menu.  
In the [SETUP] menu, various camera functions can be set,  
including shooting and playback functions not displayed in the  
function menu, and other settings such as date, time and screen  
display.  
1
2
Select [SETUP] and then press the H  
4
Use FG to select the desired submenu 2  
and then press the H button.  
button.  
The [SETUP] menu is displayed.  
Once a setting is selected, the display returns  
to the previous screen.  
COMPRESSION NORMAL  
AF MODE  
FINE ZOOM  
R
FACE/iESP  
OFF  
There may be additional operations.  
“Menu Settings” (p. 27 to 36)  
1
2
3
OFF  
IMAGE STABILIZER  
ICON GUIDE  
ON  
POWER SAVE  
ON  
ON  
MENU  
OK  
SET  
EXIT  
1
2
3
Press H to highlight the page tabs. Use  
FG to select the desired page tab and  
press I.  
MENU  
OK  
SET  
EXIT  
Page tab  
Submenu 1  
5
Press the m button to complete the  
setting.  
POWER SAVE  
OFF  
POWER SAVE  
OFF  
Some functions cannot be used in some  
shooting modes. In such cases, the  
following message is displayed after  
setting.  
1
2
3
1
2
3
MENU  
OK  
MENU  
OK  
SET  
EXIT  
SET  
EXIT  
COMPRESSION NORMAL  
AF MODE  
FACE/iESP  
OFF  
FINE ZOOM  
3
Use FG to select the desired submenu 1  
and then press the H button.  
Submenu 2  
3
CONFLICTING SETTINGS  
ICON GUIDE  
ON  
MENU  
OK  
SET  
EXIT  
POWER SAVE  
OFF  
POWER SAVPOWERSAVE  
OFF  
ON  
1
2
3
1
2
3
MENU  
OK  
MENU  
OK  
SET  
EXIT  
SET  
BACK  
4
EN  
Menu Index  
Menus for Shooting Functions  
PROGRAM AUTO  
1
2
3
4
5
6
7
8
P
9
COMPRESSION NORMAL  
IMAGE SIZE  
FRAME RATE  
IS MOVIE MODE  
R
VGA  
30fps  
OFF  
ON  
AF MODE  
FINE ZOOM  
R
FACE/iESP  
OFF  
1
2
3
1
2
3
OFF  
IMAGE STABILIZER  
ICON GUIDE  
ON  
0.0  
ON  
WB  
AUTO  
ISO  
AUTO  
MENU  
OK  
MENU  
OK  
SET  
EXIT  
SET  
EXIT  
14M  
4
FRAME RATE (Movies).....p.27  
AF MODE..........................p.28  
FINE ZOOM ......................p.28  
IMAGE STABILIZER (Still  
1 Shooting mode  
P (PROGRAM AUTO).......p.14  
4 Self-timer...........................p.24  
5 Exposure compensation....p.24  
6 White balance....................p.25  
7 ISO ....................................p.25  
8 Image size (Still images) ...p.26  
9 o (SETUP) X  
M
(iAUTO)....................p.20  
N (DIS MODE)*1 .............p.20  
s (SCENE MODE) ......p.20  
P (MAGIC FILTER).....p.21  
~ (PANORAMA)...............p.22  
A (MOVIE).......................p.15  
2 Flash..................................p.23  
3 Macro ................................p.23  
images)*2/IS MOVIE MODE  
(Movies).............................p.28  
R (Still images)..................p.29  
R (Movies).........................p.29  
ICON GUIDE.....................p.29  
z
(Shooting)/A (Movie)  
IMAGE SIZE (Movies).......p.27  
COMPRESSION (Still images)  
.......................................p.27  
*1  
Available in the FE-4020/X-940 only.  
Available in the FE-4040 only.  
*2  
Menus for Playback, Editing, and Printing Functions  
SLIDESHOW  
PERFECT FIX  
EDIT  
1
2
3
4
5
PRINT ORDER  
0
y
1
2
3
R
ERASE  
MENU  
OK  
SET  
EXIT  
SETUP  
1 SLIDESHOW.....................p.30  
2 PERFECT FIX...................p.30  
3 EDIT ..................................p.30  
4 ERASE ..............................p.30  
5 o (SETUP) X q(Playback)  
PRINT ORDER..................p.31  
0(Protect) .....................p.31  
y (Rotate).........................p.31  
R (Add sound to still images)  
.......................................p.31  
Menus for Other Camera Settings  
1 r (Settings 1)  
MEMORY FORMAT/  
2 s (Settings 2)  
FORMAT  
PW ON SETUP .................p.33  
SOUND SETTINGS ..........p.34  
PIXEL MAPPING...............p.34  
s (Monitor).....................p.34  
X(Date/time)..................p.34  
WORLD TIME....................p.35  
VIDEO OUT.......................p.35  
BACKUP  
FORMAT............................p.32  
BACKUP............................p.32  
W (Language).................p.32  
RESET...............................p.32  
USB CONNECTION..........p.33  
qPOWER ON ................p.33  
W
ENGLISH  
1
2
3
1
2
3
RESET  
USB CONNECTION  
q POWER ON  
SAVE SETTINGS  
STORAGE  
NO  
NO  
SAVE SETTINGS..............p.33 3 t (Settings 3)  
MENU  
OK  
EXIT  
SET  
POWER SAVE...................p.36  
EN  
5
Names of Parts  
Camera unit  
5
6
1
2
7
3
8
9
4
10  
FE-4020/X-940  
1
2
8
9
3
10  
4
1
2
3
4
5
Connector cover.......... p. 11, 12, 35, 37  
Multi-connector ........... p. 11, 12, 35, 37  
Strap eyelet.....................................p. 7  
Battery/card compartment cover...p. 10  
Self-timer lamp..............................p. 24  
6
7
8
9
Flash .............................................p. 23  
Lens ........................................p. 46, 59  
Microphone .............................p. 29, 31  
Speaker  
10 Tripod socket  
6
EN  
1
2
6
7
8
3
4
5
9
10  
1
2
Shutter button ...............................p. 14  
7
8
9
Indicator lamp ......................... p. 11, 12  
H button (OK)..........................p. 3, 12  
Arrow pad........................................p. 3  
INFO button (change information  
n button ........................p. 12, 14  
3 qbutton (switch between shooting  
and playback)................................p. 15  
4
5
6
Monitor....................................p. 14, 42  
m button...................................p. 4  
Zoom buttons................................p. 16  
display).............................p. 16, 19  
D button (erase) ....................p. 18  
10 E button (menu guide).................p. 19  
Attaching the camera strap  
Pull the strap tight so that it does not come loose.  
EN  
7
Monitor  
Shooting mode display  
1
2
1
2
P
18  
4
5
6
7
3
4
0.0  
5
WB  
17  
16  
17  
16  
0.0  
6
AUTO  
WB  
7
AUTO  
ISO  
8
AUTO  
14M  
9
VGA  
4
NORM  
0:34  
ON  
ON  
10  
10  
15 14 13 12  
15 9 13 12 11  
Movie  
1/100 F2.6  
20 19  
Still image  
1
2
3
Battery check ................................ p. 11  
Shooting mode........................p. 14, 20  
Flash .............................................p. 23  
Flash standby/ash charge...........p. 42  
Macro............................................p. 23  
Self-timer.......................................p. 24  
Exposure compensation ...............p. 24  
White balance ...............................p. 25  
ISO................................................p. 25  
Image size...............................p. 26, 27  
12 World time.....................................p. 35  
13 Image stabilization (still images)*1/  
Digital image stabilization (movies)  
....................................................p. 28  
14 Compression (still images)............p. 27  
15 Number of storable pictures (still  
4
5
6
7
8
9
images) .........................................p. 14  
Continuous recording length (movies)  
....................................................p. 15  
16 Current memory............................p. 48  
17 AF target mark ..............................p. 14  
18 Camera shake warning....................... -  
19 Aperture value...............................p. 14  
20 Shutter speed................................p. 14  
10 [SETUP] menu............................p. 4, 5  
11 Recording with sound (movies)  
....................................................p. 29  
*1  
Available in the FE-4040 only.  
8
EN  
Playback mode display  
Normal display  
1
2
3 4  
5 6  
1
4
10  
4/30  
00:12/00:34  
6
’10/02/26 12:30  
15  
Still image  
Detailed display  
Movie  
1
2
3 4  
5 6  
7
8
9
10 11  
10  
4/30  
1/1000 F2.6  
2.0  
ISO WB  
12  
13  
P
AUTO AUTO  
18  
17  
1/1000 F2.6  
2.0  
ISO WB  
14M  
NORM  
P
AUTO AUTO  
FILE  
14M  
14  
15  
NORM  
100 0004  
FILE  
100 0004  
’10/02/26 12:30  
’10/02/26 12:30  
16  
1
2
Battery check ................................ p. 11  
Print reservation/  
9
Aperture value...............................p. 14  
10 ISO................................................p. 25  
11 Exposure compensation ...............p. 24  
12 White balance ...............................p. 25  
13 Image size...............................p. 26, 27  
14 File number......................................... -  
15 Date and time................................p. 12  
16 Compression (still images)............p. 27  
Frame rate (movies)......................p. 27  
17 Macro............................................p. 23  
18 Flash .............................................p. 23  
number of prints...................p. 40/p. 39  
Protect...........................................p. 31  
Adding sound..........................p. 29, 31  
Current memory............................p. 48  
Frame number/total number of images  
(still images)..................................p. 16  
Elapsed time/total recording time  
3
4
5
6
(movies) ........................................p. 17  
Shooting mode........................p. 14, 20  
Shutter speed................................p. 14  
7
8
EN  
9
Preparing the Camera  
Inserting the battery and the  
SD/SDHC memory card (sold  
separately)  
Insert the battery by putting in the  
marked side rst, with the B (FE-4040)/  
C (FE-4020/X-940) mark toward the battery  
lock knob.  
Damage to the battery exterior (scratches,  
etc.) may produce heat or an explosion.  
Always use SD/SDHC memory cards with  
this camera. Do not insert any other types of  
memory card.  
Insert the battery while sliding the battery  
lock knob in the direction of the arrow.  
Slide the battery lock knob in the direction  
of the arrow to unlock, and then remove the  
battery.  
1
2
1
Turn off the camera before opening the  
battery/card compartment cover.  
When using the camera, be sure to close  
the battery/card compartment cover.  
Battery/card compartment cover  
Insert the card straight until it clicks into  
place.  
Do not touch the contact area directly.  
2
FE-4040  
FE-4020/X-940  
3
1
2
This camera allows the user to take pictures  
using the internal memory even when no  
SD/SDHC memory card (sold separately) is  
inserted. “Using an SD/SDHC memory card”  
(p. 47)  
Battery lock knob  
“Number of storable pictures (still images)/  
Continuous recording length (movies) in the  
internal memory and SD/SDHC memory  
cards” (p. 49)  
Write-protect switch  
Contact area  
To remove the SD/SDHC memory card  
1
2
Press the card in until it clicks and comes  
out slightly, then grab the card and pull it  
out.  
10 EN  
Charging the battery with the  
supplied USB-AC adapter  
The battery is not fully charged at the time  
of purchase. Before use, be sure to charge  
the battery until the indicator lamp turns off  
(up to 3 hours).  
The included F-2AC USB-AC adapter  
(with an AC cable or plug-in type; hereafter  
referred to as AC adapter) differs depending  
on the region where you purchased the  
camera. If you received a plug-in type AC  
adapter, plug it directly into an AC outlet.  
If the indicator lamp does not light, the  
camera is not correctly connected or the  
battery, camera, or AC adapter may be  
damaged.  
For details on the battery and the AC  
adapter, see “Battery and AC adapter  
(included)” (p. 46).  
The included AC adapter has been designed  
to be used only for charging. Make sure  
that operations such as shooting, viewing  
images and so on are not being used while  
the AC adapter is connected to the camera.  
When to charge the batteries  
Charge the battery when the error message  
shown below appears.  
Example: AC adapter with an AC cable  
Flashes in red  
1
Multi-connector  
BATTERY EMPTY  
Connector  
cover  
2
4
Monitor top left  
Error message  
FE-4040  
USB cable  
(supplied)  
FE-4020/X-940  
1
3
AC outlet  
2
Indicator lamp  
On: Charging  
Off: Charged  
EN 11  
Installing the supplied  
computer software (ib)  
2
3
Connect the camera to the  
computer.  
After checking the system requirements, follow  
the instructions below to connect the camera to  
a computer and install the supplied computer  
software (ib).  
Follow the on-screen instructions  
on your computer.  
Operation guide  
System requirements  
Windows XP (Service Pack 2 or later)/  
Windows Vista/Windows 7  
Operation guides displayed at the bottom of the  
screen indicate that the m button, H button,  
or zoom buttons should be used.  
Connecting the camera  
COMPRESSION NORMAL  
Multi-connector  
AF MODE  
FINE ZOOM  
R
FACE/iESP  
OFF  
1
2
3
OFF  
IMAGE STABILIZER  
ICON GUIDE  
ON  
ON  
Connector  
cover  
MENU  
OK  
SET  
EXIT  
OK  
SET  
Indicator lamp  
FE-4040  
OK  
MENU  
ERASE/CANCEL  
Operation guide  
FE-4020/X-940  
Setting the date, time and  
time zone  
The date and time set here are saved to image  
le names, date prints, and other data.  
USB cable  
(supplied)  
1
Press the n button to turn on  
the camera.  
Computer (on  
and running)  
The date and time setting screen is displayed  
when the date and time are not set.  
X
For information on using the computer  
software (ib), see the software’s online help.  
Y
M
D
TIME  
---- -- -- -- --  
.
1
Y/M/D  
.
:
Insert the supplied CD in a CD-ROM  
drive.  
A setup screen will appear on the computer  
monitor.  
MENU  
CANCEL  
Date and time setting screen  
If the setup window is not displayed,  
select “My Computer” (Windows XP) or  
“Computer” (Windows Vista/Windows 7)  
from the start menu. Double-click the  
icon for the CD-ROM drive to open the  
setup CD window and then double-click  
“CameraInitialSetup.exe”.  
12 EN  
Changing the display language  
2
3
4
Use FG to select the year for [Y].  
The language for the menu and error messages  
displayed on the monitor is adjustable.  
X
Y
M
D
TIME  
1
Display the [SETUP] menu.  
-- -- -- --  
.
“Using the Menu” (p. 4)  
Y/M/D  
2010.  
:
2
r
Use FG to select the  
(Settings  
MENU  
CANCEL  
1) tab and then press I.  
FORMAT  
BACKUP  
W
Press I to save the setting for [Y].  
ENGLISH  
1
RESET  
X
2
3
USB CONNECTION  
q POWER ON  
SAVE SETTINGS  
STORAGE  
NO  
Y
M
D
TIME  
NO  
-- -- -- --  
.
Y/M/D  
MENU  
OK  
2010.  
:
EXIT  
SET  
MENU  
CANCEL  
3
4
5
Use FG to select [W] and press  
the H button.  
As in Steps 2 and 3, use FGHI  
and the H button to set [M]  
(month), [D] (day), [TIME] (hours  
and minutes), and [Y/M/D] (date  
order).  
Use FGHI to select your  
language and press the H button.  
Press the m button.  
For a more accurate setting, press the  
H button when the time signal hits  
00 seconds while setting the minutes.  
To change the date and time, adjust the  
setting from the menu. [X] (Date/time)  
(p. 34)  
5
Use HI to select your home time  
zone and press the H button.  
Use FG to turn daylight saving time ([SUMMER])  
on or off.  
’10.02.26.12:30  
Seoul  
Tokyo  
OK  
SET  
SUMMER  
The menus can be used to change the  
selected time zone. [WORLD TIME] (p. 35)  
EN 13  
Shooting, Viewing, and Erasing  
Shooting with the optimum  
2
Hold the camera and compose the  
shot.  
aperture value and shutter  
speed [PROGRAM AUTO]  
In this mode, automatic shooting settings are  
activated while also allowing changes to a wide  
range of other shooting menu functions, such  
as exposure compensation, white balance, etc.  
as needed.  
Monitor  
Horizontal grip  
1
Press the n button to turn on  
the camera.  
[PROGRAM AUTO] indicator  
P
Vertical grip  
0.0  
When holding the camera, take care not to  
cover the ash with your ngers, etc.  
WB  
AUTO  
ISO  
AUTO  
14M  
3
Press the shutter button halfway  
down to focus on the subject.  
When the camera focuses on the subject, the  
exposure is locked (shutter speed and aperture  
value are displayed), and the AF target mark  
changes to green.  
4
Number of storable still pictures (p. 49)  
Monitor  
(standby mode screen)  
If the [PROGRAM AUTO] indicator is not  
displayed, press the m button to display  
the function menu and then set the shooting  
mode to P. “Using the Menu” (p. 4)  
The camera was unable to focus if the AF target  
mark ashes red. Try focusing again.  
AF target mark  
Current shooting mode display  
P
PROGRAM AUTO  
P
Press halfway  
0.0  
WB  
AUTO  
1/400 F2.6  
Shutter speed Aperture value  
“Focusing” (p. 44)  
ISO  
AUTO  
14M  
4
Press the n button again to turn off  
the camera.  
14 EN  
4
3
To take the picture, gently press  
the shutter button all the way down  
while being careful not to shake the  
camera.  
Press the shutter button halfway  
down to focus on the subject, and  
gently press the button all the way  
down to start recording.  
P
Press  
halfway  
Press fully  
0:34  
1/400 F2.6  
REC  
0:00  
Press fully  
Image review screen  
To view images during shooting  
Continuous  
recording  
length (p. 49)  
0:34  
Pressing the qbutton enables playback of  
images. To return to shooting, either press  
the qbutton or press the shutter button  
halfway down.  
REC  
0:00  
Current length  
Lights up red when recording  
Shooting movies [MOVIE]  
4
Gently press the shutter button all  
the way down to stop recording.  
1
Press the m button to display  
the function menu screen.  
Sound will also be recorded.  
During sound recording, only the digital  
zoom can be used. To record a movie with  
optical zoom, set [R] (movies) (p. 29) to  
[OFF].  
PROGRAM AUTO  
P
0.0  
WB  
AUTO  
ISO  
AUTO  
14M  
4
2
Use HI to set the shooting mode  
to A and then press the H button.  
[MOVIE] indicator  
0.0  
WB  
AUTO  
VGA  
0:34  
EN 15  
Using the zoom  
Changing the shooting  
information display  
Pressing the zoom buttons adjusts the shooting  
range.  
The display of the screen information can  
be changed to best match the situation, for  
example, the need for a clear view of the screen  
or for making a precise composition by using the  
grid display.  
Pressing the wide  
(W) button  
Pressing the telephoto  
(T) button  
1
Press F (INFO).  
The displayed shooting information changes in  
the order shown below each time the button is  
pressed. “Shooting mode display” (p. 8)  
Zoom bar  
P
P
0.0  
0.0  
WB  
WB  
AUTO  
AUTO  
Normal  
ISO  
ISO  
AUTO  
AUTO  
14M  
14M  
P
4
4
Optical zoom: 4x  
Digital zoom: 4x  
0.0  
WB  
AUTO  
No information  
ISO  
AUTO  
14M  
When shooting with the camera zoomed in,  
select [ON] for [IMAGE STABILIZER] (p. 28)  
(FE-4040) or select [DIS MODE] (p. 20) for  
the shooting mode (FE-4020/X-940).  
4
Detailed  
P
To take larger images without reducing  
image quality [FINE ZOOM] (p. 28)  
0.0  
WB  
AUTO  
ISO  
AUTO  
The zoom bar appearance identies the  
14M  
4
NORM  
status of the ne zoom/digital zoom.  
When using optical  
zoom and digital  
zoom  
Viewing images  
Digital zoom  
range  
Optical zoom  
range  
1
Press the q button.  
When using ne  
Number of frames/  
Total number of images  
zoom  
Fine zoom range  
4/30  
’10/02/26 12:30  
Playback image  
16 EN  
Operations during movie playback  
2
Use HI to select an image.  
Displays  
previous  
image  
Displays  
next image  
Hold I to fast forward and hold H to  
reverse.  
Elapsed time/  
Total recording  
time  
00:12/00:34  
The display size of the images can be  
changed. “Index view and close-up view”  
(p. 18)  
During playback  
Press the H button to pause  
playback. To resume playback  
during pause, fast forward, or  
rewind, press the H button.  
Pausing and  
resuming  
playback  
To play sound recordings  
To play sound recorded with an image,  
select the image and press the H button. A  
! icon appears on images with which sound  
has been recorded.  
Press I to fast forward. Press  
Fast forward I again to increase the fast  
forward speed.  
[R] (still images) (p. 29, 31)  
Press H to rewind. The  
Rewind  
rewinding speed increases  
each time H is pressed.  
Adjusting the Use FG to adjust the  
volume  
volume.  
Operations during pausing playback  
During audio playback  
To play back movies  
Select a movie, and press the H button.  
00:14/00:34  
4/30  
During pause  
Press F to display the rst  
Cueing  
frame and press G to display  
the last frame.  
Advancing  
Press I or H to advance or  
and rewinding rewind one frame at a time.  
OK  
MOVIE PLAY  
’10/02/26 12:30  
one frame at Hold I or H pressed for  
Movie  
continuous advance or rewind.  
a time  
Resuming  
playback  
Press the H button to resume  
playback.  
To stop movie playback  
Press the m button.  
EN 17  
Erasing images during  
Index view and close-up view  
playback (Single image erase)  
Index view enables quick selection of a desired  
image. Close-up view (up to 10x magnication)  
allows checking of image details.  
1
Display the image you want to erase  
and press G ( ).  
D
1
Press the zoom buttons.  
ERASE  
ALL ERASE  
SEL. IMAGE  
ERASE  
Single-image view  
Close-up view  
4/30  
4/30  
W
T
CANCEL  
MENU  
OK  
BACK  
SET  
’10/02/26 12:30  
’10/02/26 12:30  
2
Press FG to select [ERASE], and  
press the H button.  
W
T
[ALL ERASE] (p. 30) and [SEL. IMAGE]  
(p. 30) can be used to erase multiple images  
at the same time.  
Index view  
’10/02/26  
2
4
W
T
’10/02/26  
2
4
To select an image in index view  
Use FGHI to select an image, and press  
the H button to display the selected image  
in single-image view.  
To scroll an image in close-up view  
Use FGHI to move the viewing area.  
18 EN  
Changing the image  
information display  
Shooting information settings displayed on the  
screen can be changed.  
1
Press F (INFO).  
The displayed image information changes in  
the order shown below each time the button is  
pressed.  
Normal  
10  
4/30  
No information  
’10/02/26 12:30  
Detailed  
10  
4/30  
1/1000 F2.6  
2.0  
ISO WB  
P
AUTO AUTO  
14M  
NORM  
FILE  
100 0004  
’10/02/26 12:30  
Using the menu guide  
If the E button is pressed while settings are  
being made in the playback function or [SETUP]  
menu, a description of the selected option is  
displayed.  
“Using the Menu” (p. 4)  
EN 19  
Using Shooting Modes  
Reducing blur on shooting  
The shooting mode can be selected from  
the function menu in the following order:  
M, N (Available in the FE-4020/X-940  
,
P
[DIS MODE] (FE-4020/X-940)  
This mode enables the user to reduce blur  
that is caused by camera shake and subject  
movement.  
only), s, P, ~, and A.  
“Using the Menu” (p. 4)  
Shooting with automatic  
settings [iAUTO]  
1
Set the shooting mode to N.  
[DIS MODE] indicator  
According to the scene, the camera  
automatically selects the optimal shooting  
mode from [PORTRAIT]/[LANDSCAPE]/  
[NIGHT+PORTRAIT]/[SPORT]/[MACRO]. This  
is a fully automatic mode that allows the user  
to take pictures using the best mode for the  
shooting scene simply by pressing the shutter  
button.  
0.0  
WB  
AUTO  
14M  
4
1
Set the shooting mode to M.  
Using the best mode for the  
The icon changes depending on the scene  
that the camera automatically selects.  
shooting scene [SCENE MODE]  
1
Set the shooting mode to s.  
SCENE MODE  
14M  
4
0.0  
WB  
AUTO  
14M  
In some cases, the camera may not select  
the desired shooting mode.  
4
When the camera cannot identify which is  
the optimal mode, [PROGRAM AUTO] will  
be selected.  
2
Press G to go to the submenu.  
PORTRAIT  
0.0  
WB  
AUTO  
14M  
4
20 EN  
Shooting with special effects  
[MAGIC FILTER]  
3
Use HI to select the best shooting  
mode for the scene, and press the  
H button.  
Add an artistic effect to your photo by selecting  
the desired magic lter.  
1
Set the shooting mode to P.  
MAGIC FILTER  
0.0  
WB  
AUTO  
14M  
4
0.0  
Icon indicating [SCENE MODE]  
that is set  
WB  
AUTO  
14M  
4
In [SCENE MODE], the optimum shooting  
settings are pre-programmed for specic  
shooting scenes. For this reason, some  
settings cannot be changed in some modes.  
2
3
Press G to go to the submenu.  
POP ART  
Option  
Application  
BPORTRAIT/FLANDSCAPE/  
GNIGHT SCENE*1/  
MNIGHT+PORTRAIT/  
CSPORT/NINDOOR/  
WCANDLE*1/  
RSELF PORTRAIT/  
SSUNSET*1/XFIREWORKS*1/  
VCUISINE/dDOCUMENTS/  
PET  
The camera  
takes a picture  
using the  
optimum settings  
for the scene  
conditions.  
0.0  
WB  
AUTO  
14M  
Use HI to select the desired effect  
and then press the H button to set.  
*1  
When the subject is dark, noise reduction is  
automatically activated. This approximately doubles  
the shooting time during which no other pictures can  
be taken.  
To take pictures of a moving subject  
like a pet ([PET])  
0.0  
1Use HI to select [PET], and press  
WB  
AUTO  
the H button to set.  
14M  
2Hold the camera to align the AF target  
mark on the subject and press the H  
button.  
4
Icon indicating [MAGIC FILTER]  
that is set  
When the camera recognizes the subject,  
the AF target mark automatically tracks the  
subject movement to focus on it continuously.  
To focus on a moving subject continuously  
(AF Tracking)” (p. 28).  
Shooting mode  
Option  
[POP ART  
\PIN HOLE  
]FISH EYE  
@DRAWING  
MAGIC FILTER  
In [MAGIC FILTER], the optimum shooting  
settings are pre-programmed for each  
scene effect. For this reason, some settings  
cannot be changed in some modes.  
EN 21  
Creating panoramic images  
[PANORAMA]  
3
Press the shutter button to take the  
rst frame, and then compose the  
second shot.  
Take pictures that can be joined to form a  
panorama using the ib computer software.  
Before rst  
The focus, exposure (p. 24), zoom position  
(p. 16), and white balance (p. 25) are locked  
at the rst frame.  
shot  
1
2
The ash (p. 23) is xed to $(FLASH OFF)  
mode.  
1
Set the shooting mode to ~.  
MENU  
BACK  
PANORAMA  
0.0  
WB  
After rst  
AUTO  
ISO  
shot  
AUTO  
14M  
4
1
2
2
Use FGHI to select the pan  
direction.  
MENU  
EXIT  
After the rst shot, the area shown in the  
white frame reappears on the side of the  
display opposite the pan direction. Frame  
subsequent photographs so that they overlap  
with the image on the monitor.  
4
Repeat Step 3 until the number  
of desired frames is taken, and  
then press the m button when  
nished.  
Panorama shooting is possible for up to  
10 frames.  
For information on making panoramas,  
refer to the online help for the ib computer  
software.  
22 EN  
Using Shooting Functions  
Shooting closeups  
“Using the Menu” (p. 4)  
(Macro shooting)  
Using the ash  
This function enables the camera to focus and  
shoot subjects at close distances.  
The ash functions can be selected to best  
match the shooting conditions.  
1
Select the macro option in the  
shooting function menu.  
1
Select the ash option in the  
shooting function menu.  
P
P
OFF  
FLASH AUTO  
0.0  
WB  
AUTO  
0.0  
ISO  
AUTO  
WB  
AUTO  
14M  
ISO  
AUTO  
4
14M  
4
2
Use HI to select the setting  
option, and press the H button to  
set.  
2
Use HI to select the setting  
option, and press the H button to  
set.  
Option  
Description  
OFF  
Macro mode is deactivated.  
Option  
Description  
This enables shooting as close as  
20 cm/7.9 in.*1 (60 cm/23.6 in.*2) to  
the subject.  
The ash res automatically in  
low-light or backlight conditions.  
FLASH AUTO  
MACRO  
Pre-ashes are emitted to reduce  
the occurrence of red eye in your  
photos.  
This enables shooting as close as  
4 cm/1.6 in. to the subject.  
REDEYE  
SUPER MACRO*3  
*1  
*2  
*3  
The ash res regardless of the  
available light.  
When the zoom is at the widest (W) position.  
When the zoom is at the most telephoto (T) position.  
The zoom is automatically xed.  
FILL IN  
FLASH OFF  
The ash does not re.  
The ash (p. 23) and zoom (p. 16) cannot  
be set during super macro shooting.  
EN 23  
Using the self-timer  
Adjusting the brightness  
(Exposure compensation)  
After the shutter button is pressed all the way  
down, the picture is taken after a short delay.  
The standard brightness (appropriate exposure)  
set by the camera based on the shooting mode  
(except for [iAUTO]) can be adjusted brighter or  
darker to obtain a desired shot.  
1
Select the self-timer option in the  
shooting function menu.  
1
Select the exposure compensation  
option in the shooting function  
menu.  
P
Y
OFF  
2
12  
0.0  
WB  
P
AUTO  
ISO  
0.0  
AUTO  
14M  
4
0.3 0.0 0.3  
WB  
AUTO  
ISO  
AUTO  
2
Use HI to select the setting  
option, and press the H button to  
set.  
14M  
2
Use HI to select the desired  
brightness, and press the  
H button.  
Option  
Description  
YOFF  
The self-timer is deactivated.  
The self-timer lamp turns on for  
approx. 10 seconds, then blinks  
for approx. 2 seconds, and then  
the picture is taken.  
Y12 SEC  
The self-timer lamp blinks for  
approx. 2 seconds, and then the  
picture is taken.  
Y2 SEC  
Self-timer shooting is automatically canceled  
after one shot.  
To cancel the self-timer after it starts  
Press the m button.  
24 EN  
Adjusting to a natural color  
scheme (White balance)  
Selecting the ISO sensitivity  
Abbreviation for the International  
For more natural coloring, choose a white  
balance option suited to the scene.  
Organization for Standardization. ISO  
standards specify the sensitivity for digital  
cameras and lm, thus codes such as “ISO  
100” are used to represent sensitivity.  
1
Select the white balance option in  
the shooting function menu.  
In the ISO setting, although smaller values  
result in less sensitivity, sharp images can  
be taken under fully lit conditions. Larger  
values result in higher sensitivity, and  
images can be taken at fast shutter speeds  
even under low light conditions. However,  
high sensitivity introduces noise into the  
resulting picture, which may give it a grainy  
appearance.  
P
WB AUTO  
0.0  
WB  
AUTO  
ISO  
AUTO  
14M  
1
Select the ISO setting option in the  
shooting function menu.  
2
Use HI to select the setting  
option, and press the H button to  
set.  
P
Option  
Description  
0.0  
WB  
The camera automatically adjusts  
the white balance according to the  
shooting scene.  
AUTO  
ISO  
ISO  
ISO  
ISO 200  
WB AUTO  
100 200 400  
14M  
1/400 F2.6  
For shooting outdoors under a  
clear sky  
5
3
1
For shooting outdoors under a  
cloudy sky  
2
Use HI to select the setting  
option, and press the H button to  
set.  
For shooting under tungsten  
lighting  
For shooting under daylight  
uorescent lighting (household  
lighting, etc.)  
Option  
Description  
w
The camera automatically adjusts  
the sensitivity according to the  
shooting scene.  
ISO AUTO  
For shooting under neutral  
uorescent lighting (desk lamps,  
etc.)  
x
y
The camera automatically adjusts  
to a higher sensitivity than [ISO  
AUTO] to reduce blurring caused  
by camera shake and motion of  
the subject.  
HIGH ISO  
AUTO*1  
For shooting under white  
uorescent lighting (ofces, etc.)  
100/200/400/  
800/1600  
The ISO sensitivity is xed to the  
selected value.  
*1  
Available in the FE-4040 only.  
EN 25  
Selecting the size of still  
images  
1
Select the image size option in the  
shooting function menu.  
P
0.0  
WB  
AUTO  
ISO  
AUTO  
16:9S 14M  
8
M
14M  
4
2
Use HI to select the setting  
option, and press the H button to  
set.  
Option  
Description  
Suitable for printing A3  
(11×17 in.) pictures.  
14M (4288×3216)  
8M (3264×2448)  
5M (2560×1920)  
3M (2048×1536)  
2M (1600×1200)  
1M (1280×960)  
Suitable for printing pictures  
up to A3 (11×17 in.).  
Suitable for printing A4  
(8.5×11 in.) pictures.  
Suitable for printing pictures  
up to A4 (8.5×11 in.).  
Suitable for printing A5  
(5×7 in.) pictures.  
Suitable for printing pictures  
at postcard size.  
Suitable for viewing pictures  
on a TV or using pictures in  
emails and on websites.  
VGA (640×480)  
Suitable for playing pictures  
on a wide screen TV.  
16:9S (1920×1080)  
Image size for movies can be selected from  
the [SETUP] menu. [IMAGE SIZE/FRAME  
RATE] (p. 27)  
“Number of storable pictures (still images)/  
Continuous recording length (movies) in the  
internal memory and SD/SDHC memory  
cards” (p. 49)  
26 EN  
For information on using the menus, see “Using the Menu” (p. 4).  
Menus for Shooting Functions  
The default settings of the function are highlighted in  
.
Selecting a compression mode for still images [COMPRESSION]  
z
(Shooting menu) X COMPRESSION  
Available shooting modes: M N*1 s P ~  
P
*1 Available in the FE-4020/X-940 only.  
Submenu 2  
Application  
FINE  
Shooting at high quality.  
NORMAL  
Shooting at normal quality.  
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal  
memory and SD/SDHC memory cards” (p. 49)  
Selecting the image quality for movies [IMAGE SIZE/FRAME RATE]  
A (Movie menu) X IMAGE SIZE/FRAME RATE  
Available shooting modes: A  
Submenu 1  
Submenu 2  
Application  
VGA (640×480)/  
QVGA (320×240)  
IMAGE SIZE  
Select the image quality based on the image size and frame rate.  
Higher frame rates provide smoother movie images.  
N30fps*1/  
FRAME RATE  
O15fps*1  
*1  
frames per second  
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal  
memory and SD/SDHC memory cards” (p. 49)  
EN 27  
Selecting the focusing area [AF MODE]  
Shooting at higher magnications than  
optical zoom without reducing the  
image quality [FINE ZOOM]  
z
(Shooting menu) X AF MODE  
Available shooting modes: M N*1  
s
P
z
(Shooting menu) X FINE ZOOM  
P ~  
Available shooting modes: M N*1  
s
*1 Available in the FE-4020/X-940 only.  
P
P ~  
Submenu 2  
Application  
*1 Available in the FE-4020/X-940 only.  
The camera focuses automatically.  
(If a face is detected, it is shown  
by a white frame*1; when the  
shutter button is pressed halfway  
and the camera is able to focus,  
the frame color is changed to  
green*2 if the camera is able to  
focus. If no face is detected, the  
camera chooses a subject in the  
frame and focuses automatically.)  
Submenu 2  
Application  
Optical zoom and digital zoom are  
used to zoom in for shooting.  
OFF  
FACE/iESP  
Optical zoom and image cropping  
are combined to zoom in for  
shooting (up to 26.8x).  
ON  
This function will not reduce the image  
quality since it does not convert the data  
with fewer pixels into the data with larger  
pixels.  
The camera focuses on the  
subject located within the AF  
target mark.  
SPOT  
The camera tracks the subject  
movement automatically to focus  
on it continuously.  
When set to [ON], [IMAGE SIZE] is limited  
to [4] or lower.  
AF TRACKING  
When set to [ON], digital zoom is canceled  
automatically.  
*1  
For some subjects, the frame may not appear or  
may take some time to appear.  
If the frame blinks in red, the camera is unable to  
focus. Try again to press the shutter button halfway.  
[FINE ZOOM] is not available when  
[%SUPER MACRO] (p. 23) is selected.  
*2  
To focus on a moving subject  
continuously (AF Tracking)  
Stabilizing the blurred image caused  
by the camera shake when shooting  
[IMAGE STABILIZER] (Still images)  
(FE-4040)/[IS MOVIE MODE] (Movies)  
1Hold the camera to align the AF target  
mark on the subject and press the  
H button.  
z
(Shooting menu) X IMAGE STABILIZER  
2When the camera recognizes the subject,  
the AF target mark automatically tracks  
the subject movement to focus on it  
continuously.  
A (Movie menu) X IS MOVIE MODE  
Available shooting modes: M s P  
P
~ A  
3To cancel the tracking, press the  
H button.  
Submenu 2  
OFF  
ON  
Application  
Depending on the subjects or the shooting  
conditions, the camera may be unable to  
lock the focus or fail to track the subject  
movement.  
Shoots without using the image  
stabilizing function.  
Shoots using the image stabilizing  
function.  
When the camera fails to track the subject  
movement, the AF target mark changes to  
red.  
The default settings are [ON] for [IMAGE  
STABILIZER] (still images) and [OFF] for [IS  
MOVIE MODE] (movies).  
28 EN  
For information on using the menus, see “Using the Menu” (p. 4).  
Displaying icon guides [ICON GUIDE]  
At very slow shutter speeds (for example  
when using still picture shooting mode or  
taking night photographs), some images  
may not acquire the proper stabilization  
effect.  
z
(Shooting menu) X ICON GUIDE  
Available shooting modes: M N*1  
s
P
P ~ A  
*1 Available in the FE-4020/X-940 only.  
Image stabilization may not prevent motion  
blur caused by movement of the subject or  
by extreme movement of the camera.  
Submenu 2  
Application  
When [IS MOVIE MODE] (movies) is set to  
[ON] during shooting, the recorded images  
will be slightly magnied.  
OFF  
No icon guide is displayed.  
The explanation of the selected  
icon will be displayed when  
a shooting mode or shooting  
function menu icon is selected  
(position the cursor on the icon for  
a while to display the explanation).  
ON  
Recording sound when shooting still  
images [R]  
z
(Shooting menu) X R  
PROGRAM AUTO  
P
Available shooting modes: M N*1  
s
P
Functions can be changed  
manually.  
*1 Available in the FE-4020/X-940 only.  
Icon guide  
Submenu 2  
Application  
0.0  
WB  
AUTO  
OFF  
No sound is recorded.  
ISO  
AUTO  
The camera automatically starts  
recording sound for approx.  
14M  
4
ON  
4 seconds after a picture is taken.  
This is useful for recording notes  
or comments about the picture.  
When recording, aim the microphone (p. 6)  
at the source of the sound you want to  
record.  
Recording sound when shooting  
movies [R]  
A (Movie menu) X R  
Available shooting modes: A  
Submenu 2  
OFF  
ON  
Application  
No sound is recorded.  
Sound is recorded.  
When set to [ON], only the digital zoom can  
be used during movie recording. To record  
the movie with the optical zoom, set [R]  
(movies) to [OFF].  
EN 29  
Menus for Playback, Editing, and  
Printing Functions  
Playing back pictures automatically  
[SLIDESHOW]  
Changing the image size [Q]  
EDIT X Q  
SLIDESHOW  
Submenu 2  
Application  
To start a slideshow  
This saves a high-resolution image  
as a separate image with a smaller  
size for use in e-mail attachments  
and other applications.  
8 640 × 480  
After pressing the H button, the slideshow  
starts. To stop the slideshow, press the  
H button or the m button.  
9 320 × 240  
1Use HI to select an image.  
Single-frame advance/rewind: During a  
slideshow, press I to advance one frame or  
press H to rewind one frame.  
2Use FG to select the size, and press  
the H button.  
Retouching images [PERFECT FIX]  
Cropping images [P]  
EDIT X P  
PERFECT FIX  
Depending on the picture, the editing may  
not be effective.  
1Use HI to select an image, and press  
the H button.  
The retouching process may lower the  
image resolution.  
2Use the zoom buttons to select the size of  
the cropping frame, and use FGHI to  
move the frame.  
Submenu 1  
ALL  
Application  
[LIGHTING FIX] and [REDEYE  
FIX] are applied together.  
Only sections darkened by  
backlighting and dim lighting are  
brightened.  
LIGHTING FIX  
REDEYE FIX  
Cropping frame  
Eyes that are reddened by the  
ash are corrected.  
OK  
SET  
1Use FG to select a correction method,  
and press the H button.  
3Press the H button.  
2Use HI to select an image for  
retouching, and press the H button.  
The edited image will be saved as a separate  
image.  
The retouched image is saved as a separate  
image.  
Erasing images [ERASE]  
ERASE  
Submenu 1  
Application  
All images in the internal memory  
or card will be erased.  
ALL ERASE  
Images are individually selected  
and erased.  
SEL. IMAGE  
ERASE  
Deletes the image displayed.  
Cancels erasing.  
CANCEL  
30 EN  
For information on using the menus, see “Using the Menu” (p. 4).  
Protecting images [0]  
q(Playback menu) X 0  
When erasing pictures in a internal memory,  
do not insert the card into the camera.  
When erasing pictures from the card, insert  
a card into the camera in advance.  
Protected images cannot be erased by  
[ERASE] (p. 18, 30), [SEL. IMAGE], or [ALL  
ERASE] (p. 30), but all images are erased  
by [MEMORY FORMAT]/[FORMAT] (p. 32).  
To erase all images [ALL ERASE]  
1Use FG to select [ALL ERASE], and  
press the H button.  
1Use HI to select an image.  
2Use FG to select [YES], and press the  
H button.  
2Press the H button.  
Press the H button again to cancel the  
settings.  
To individually select and erase  
images [SEL. IMAGE]  
3If necessary, repeat Steps 1and 2  
to protect other images, and press the  
m button.  
1Use FG to select [SEL. IMAGE], and  
press the H button.  
2Use HI to select the image to be  
erased, and press the H button to add a  
R mark to the image.  
Rotating images [y]  
q(Playback menu) X y  
Press the W zoom button to display an index  
view. Images can be quickly selected using  
FGHI. Press the T button to return to the  
single frame display.  
1Use HI to select an image.  
2Press the H button to rotate the image.  
3If necessary, repeat Steps 1and 2to  
make settings for other images, and press  
the m button.  
SEL. IMAGE  
The new picture orientations will be saved  
even after the power is turned off.  
R mark  
Adding sound to still images [R]  
q(Playback menu) X R  
OK  
MENU  
ERASE/CANCEL  
1Use HI to select an image.  
3Repeat Step 2to select the images to be  
erased, and then press the m button  
to erase the selected images.  
2Aim the microphone toward the sound  
source.  
4Use FG to select [YES], and press the  
FE-4040  
FE-4020/X-940  
H button.  
The images with a R mark are erased.  
Saving print settings to the image data  
[PRINT ORDER]  
Microphone  
q(Playback menu) X PRINT ORDER  
3Press the H button.  
“Print Reservations (DPOF)” (p. 40)  
Recording starts.  
Print reservation can be set only for still  
images that are recorded to the card.  
EN 31  
Menus for Other Camera Settings  
Erasing data completely  
Changing the display language [W]  
[MEMORY FORMAT]/[FORMAT]  
r (Settings 1) X W  
r (Settings 1) X MEMORY FORMAT/  
Submenu 2  
Application  
FORMAT  
The language for the menus and  
error messages displayed on the  
monitor is selected.  
Before formatting, check that no important  
data is left in the internal memory or card.  
Languages  
Cards must be formatted with this camera  
before rst use or after being used with  
other cameras or computers.  
“Changing the display language” (p. 13)  
Restoring the shooting functions to the  
default settings [RESET]  
Submenu 2  
YES  
NO  
Application  
Completely erases the image data  
in the internal memory*1 or card  
(including protected images).  
r (Settings 1) X RESET  
Cancels formatting.  
Submenu 2  
Application  
*1  
Be sure to remove the card before formatting the  
internal memory.  
Restores the following menu  
functions to the default settings.  
• Flash (p. 23)  
• Macro (p. 23)  
• Self-timer (p. 24)  
• Exposure compensation (p. 24)  
• White balance (p. 25)  
• ISO (p. 25)  
Copying images in the internal memory  
to the card [BACKUP]  
YES  
r (Settings 1) X BACKUP  
• Image size (p. 26)  
• Menu functions in  
z
(Shooting  
menu)/A (Movie menu) (p. 27  
Submenu 2  
YES  
NO  
Application  
Backs up image data in the  
internal memory to the card.  
to 29)  
The current settings will not be  
changed.  
NO  
Cancels the backup.  
It takes some time to back up data. Check  
that the battery has sufcient power before  
starting the backup.  
32 EN  
For information on using the menus, see “Using the Menu” (p. 4).  
Selecting a method for connecting  
the camera to other devices  
[USB CONNECTION]  
Turning on the camera with the q  
button [qPOWER ON]  
r (Settings 1) X qPOWER ON  
r (Settings 1) X USB CONNECTION  
Submenu 2  
NO  
Application  
Submenu 2  
AUTO  
Application  
The camera is not turned on. To  
turn on the camera, press the  
n button.  
When the camera is connected  
to another device, the settings  
selection screen is displayed.  
Pressing the qbutton turns  
on and starts the camera in the  
playback mode.  
YES  
Select when transferring images  
to a computer or when using  
ib computer software with the  
camera connected to a computer.  
STORAGE  
Select when transferring images  
to a computer running Windows  
Vista or Windows 7 without using  
ib computer software.  
Saving the mode when the camera is  
turned off [SAVE SETTINGS]  
MTP  
r (Settings 1) X SAVE SETTINGS  
Select when connecting to a  
PictBridge-compatible printer.  
PRINT  
Submenu 2  
Application  
The shooting mode is saved  
when the camera is turned off and  
is reactivated the next time the  
camera is turned on.  
Copying pictures to a computer  
without using ib computer software  
This camera is compatible with the USB Mass  
Storage Class. You can transfer and save the  
image data on your computer while the camera  
and the computer are connected.  
YES  
The shooting mode is set to P  
mode when the camera is turned  
on.  
NO  
System requirements  
Windows 2000 Professional/  
Windows XP/Windows Vista/Windows 7/  
Mac OS X v10.3 or later  
Choosing the opening screen display  
[PW ON SETUP]  
s (Settings 2) X PW ON SETUP  
Even if a computer has USB ports, proper  
operation is not guaranteed in the following  
cases.  
Submenu 2  
OFF  
Application  
No opening screen is displayed.  
computers with USB ports installed using an  
expansion card, etc.  
The opening screen is displayed  
when the camera is turned on.  
ON  
computers without a factory-installed OS and  
home-built computers  
EN 33  
Selecting the camera sound and its volume [SOUND SETTINGS]  
s (Settings 2) X SOUND SETTINGS  
Submenu 2  
Submenu 3  
OFF/ON  
Submenu 4  
Application  
Select [ON] to disable camera sounds  
(operating sound, shutter sound, and warning  
sound) and mute sound during playback.  
SILENT MODE*1, 2  
SOUND TYPE  
VOLUME  
1/2/3  
Selects the operating sound and volume  
of the camera buttons (except the shutter  
button).  
BEEP  
OFF (No Sound) or  
2 levels of volume  
SOUND TYPE  
VOLUME  
1/2/3  
Selects the type and volume of the shutter  
sound.  
SHUTTER SOUND  
OFF (No Sound) or  
2 levels of volume  
OFF (No Sound) or  
2 levels of volume  
8
Adjusts the warning sound volume.  
Adjusts the image playback volume.  
OFF (No Sound) or  
5 levels of volume  
qVOLUME  
*1  
Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback.  
Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television.  
*2  
Adjusting the CCD and the image  
Adjusting the brightness of the monitor  
processing function [PIXEL MAPPING]  
[s]  
s (Settings 2) X PIXEL MAPPING  
s (Settings 2) X s  
This function has already been adjusted  
at factory shipping, and no adjustment is  
needed right after purchase. Approximately  
once a year is recommended.  
Submenu 2  
Application  
Selects the monitor brightness  
depending on the surrounding  
brightness.  
BRIGHT/  
NORMAL  
For best results, wait at least one minute  
after taking or viewing pictures before  
performing pixel mapping. If the camera is  
turned off during pixel mapping, be sure to  
perform it again.  
Setting the date and time [X]  
s (Settings 2) X X  
To adjust the CCD and the image  
processing function  
“Setting the date, time and time zone”  
(p. 12)  
Press the H button when [START]  
(Submenu 2) is displayed.  
To select the date display order  
1Press I after setting Minute, and use  
FG to select the date display order.  
The camera checks and adjusts the CCD and the  
image processing function at the same time.  
X
Y
M
D
TIME  
Y/M/D  
2010.02.26 12:30  
Date order  
MENU  
OK  
SET  
CANCEL  
34 EN  
For information on using the menus, see “Using the Menu” (p. 4).  
Switching between home and travel destination time zones [WORLD TIME]  
s (Settings 2) X WORLD TIME  
You will not be able to select a time zone using [WORLD TIME] if the camera clock has not rst been  
set using [X].  
Submenu 2  
Submenu 3  
Application  
The time in the home time zone (the time zone selected for x in  
submenu 2).  
x
y
HOME/ALTERNATE  
The time in the travel destination time zone (the time selected for y  
in submenu 2).  
x*1  
y*1, 2  
Select the home time zone (x).  
Select the travel destination time zone (y).  
*1  
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on.  
When you select a time zone, the camera automatically calculates the time difference between the selected  
zone and the home time zone (x) to display the time in the travel destination time zone (y).  
*2  
Selecting a video signal system to match your TV [VIDEO OUT]  
s (Settings 2) X VIDEO OUT  
The TV video signal system varies depending on the countries and regions. Before viewing camera  
images on your TV, select the video output according to your TV’s video signal type.  
Submenu 2  
NTSC  
PAL  
Application  
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.  
Connecting the camera to a TV in European countries, China, and so on.  
The factory default settings differ according to the region where the camera is sold.  
To play back camera images on a TV  
1Use the camera to select the same video signal system as the one of connected TV  
([NTSC]/[PAL]).  
2Connect the TV and camera.  
Multi-connector  
Connector cover  
AV cable (supplied)  
Connect to the TV video  
input jack (yellow) and  
audio input jack (white).  
FE-4040  
FE-4020/X-940  
EN 35  
3Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”  
For details on changing the input source of the TV, refer to the TV’s instruction manual.  
4Press the qbutton, and use HI to select the image for playback.  
Depending on the TV’s settings, the displayed images and information may become cropped.  
Saving battery power between shots [POWER SAVE]  
t (Settings 3) X POWER SAVE  
Submenu 2  
OFF  
Application  
Cancels [POWER SAVE].  
When the camera is not being used for approx. 10 seconds, the monitor automatically turns  
off to save battery power.  
ON  
To resume standby mode  
Press any button.  
36 EN  
Printing  
Direct printing (PictBridge*1)  
2
Turn on the printer, and then  
connect the printer and camera.  
By connecting the camera to a PictBridge-  
compatible printer, you can print images directly  
without using a computer.  
To nd out if your printer supports PictBridge,  
refer to the printer’s instruction manual.  
Connector cover  
FE-4040  
Multi-connector  
*1  
PictBridge is a standard for connecting digital  
cameras and printers of different makers and  
printing out pictures directly.  
FE-4020/X-940  
The printing modes, paper sizes, and other  
parameters that can be set with the camera  
vary depending on the printer that is used.  
For details, refer to the printer’s instruction  
manual.  
USB cable  
(supplied)  
For details on the available paper types,  
loading paper, and installing ink cassettes,  
refer to the printer’s instruction manual.  
I button  
Printing images at the  
printer’s standard settings  
[EASY PRINT]  
In the [SETUP] menu, set [USB  
CONNECTION] to [PRINT]. “Using the  
Menu” (p. 4)  
EASY PRINT START  
CUSTOM PRINT OK  
1
Display the image to be printed on  
the monitor.  
3
4
Press I to start printing.  
“Viewing images” (p. 16)  
To print another image, use HI  
to select an image, and press the  
H button.  
To exit printing  
After a selected image is displayed on the  
screen, disconnect the USB cable from the  
camera and printer.  
OK  
PRINT  
EXIT  
EN 37  
Changing the printer’s settings  
for printing [CUSTOM PRINT]  
5
Use FG to select the  
[BORDERLESS] or [PICS/SHEET]  
settings, and press the H button.  
1
Follow Steps 1 and 2 in [EASY  
PRINT] (p. 37).  
Submenu 4  
OFF/ON*1  
Application  
The image is printed with a border  
around it ([OFF]).  
The image is printed to ll the  
entire paper ([ON]).  
2
3
Press the H button to start  
printing.  
(The number of The number of images per sheet  
images per sheet ([PICS/SHEET]) is selectable only  
varies depending when [MULTI PRINT] is selected  
Use FG to select the print mode,  
and press the H button.  
on the printer.)  
in Step 3.  
*1  
PRINT MODE SELECT  
The available settings for [BORDERLESS] vary  
depending on the printer.  
PRINT  
ALL PRINT  
MULTI PRINT  
ALL INDEX  
PRINT ORDER  
If [STANDARD] is selected in Steps 4 and 5,  
the image is printed at the printer’s standard  
settings.  
4/30  
MENU  
OK  
SET  
EXIT  
14M  
NORM  
Submenu 2  
Application  
FILE  
100 0004  
’10/02/26 12:30  
This prints the image selected in  
Step 6.  
PRINT  
OK  
PRINT  
MORE  
This prints all images stored in the  
internal memory or card.  
SINGLE PRINT  
ALL PRINT  
MULTI PRINT  
This prints one image in a multiple  
layout format.  
6
7
Use HI to select an image.  
This prints an index of all images  
stored in the internal memory  
or card.  
ALL INDEX  
Press F to make a print reservation  
for the current image. Press G to  
make the detailed printer settings  
for the current image.  
This prints images based on the  
print reservation data on the card.  
PRINT ORDER*1  
*1  
[PRINT ORDER] is available only when print  
reservations have been made. “Print Reservations  
(DPOF)” (p. 40)  
To make the detailed printer settings  
1Use FGHI to select the setting, and  
press the H button.  
4
Use FG to select [SIZE] (Submenu  
3), and press I.  
PRINT INFO  
If the [PRINTPAPER] screen is not  
displayed, the [SIZE], [BORDERLESS],  
and [PICS/SHEET] are set to the printer’s  
standard.  
<x  
1
DATE  
FILE NAME  
P
WITHOUT  
WITHOUT  
PRINTPAPER  
MENU  
OK  
EXIT  
SET  
SIZE  
BORDERLESS  
STANDARD  
STANDARD  
MENU  
OK  
SET  
BACK  
38 EN  
Submenu Submenu  
9
Press the H button.  
Application  
5
6
This selects the number  
of prints.  
PRINT  
<×  
0 to 10  
Selecting [WITH] prints the  
images with the date.  
Selecting [WITHOUT]  
prints the images without  
the date.  
PRINT  
WITH/  
WITHOUT  
CANCEL  
DATE  
Selecting [WITH] prints the  
le name on the image.  
Selecting [WITHOUT] does  
not print any le name on  
the image.  
MENU  
OK  
SET  
BACK  
WITH/  
WITHOUT  
FILE NAME  
10  
Use FG to select [PRINT], and  
press the H button.  
Printing starts.  
(Proceeds  
to the  
setting  
This selects a portion of  
the image for printing.  
P
When [OPTION SET] is selected in [ALL PRINT]  
mode, [PRINT INFO] screen is displayed.  
screen.)  
When printing is nished, the [PRINT MODE  
SELECT] screen is displayed.  
To crop an image [P]  
1Use the zoom buttons to select the size  
of the cropping frame, use FGHI  
to move the frame, and then press the  
H button.  
PRINT MODE SELECT  
PRINT  
ALL PRINT  
MULTI PRINT  
ALL INDEX  
PRINT ORDER  
MENU  
OK  
SET  
EXIT  
Cropping frame  
To cancel printing  
1When [DO NOT REMOVE USB CABLE]  
is displayed, press the m button, use  
FG to select [CANCEL], and then press  
the H button.  
OK  
SET  
2Use FG to select [OK], and press the  
H button.  
P
DO NOT REMOVE USB CABLE  
OK  
MENU  
CANCEL  
CANCEL  
MENU  
OK  
SET  
BACK  
CONTINUE  
CANCEL  
8
If necessary, repeat Steps 6 and 7  
to select the image to be printed,  
OK  
SET  
make the detailed settings, and set  
[SINGLE PRINT].  
EN 39  
11  
12  
3
4
Press the m button.  
Use FG to select [<], and press  
the H button.  
When the message [REMOVE USB  
CABLE] is displayed, disconnect  
the USB cable from the camera and  
printer.  
4/30  
0
14M  
NORM  
Print Reservations (DPOF*1)  
FILE  
100 0004  
’10/02/26 12:30  
OK  
SET  
In print reservations, the number of prints and  
date imprint option are saved in the image on  
the card. This enables easy printing at a printer  
or print shop supporting DPOF by using only the  
print reservations on the card without a computer  
or a camera.  
Use HI to select the image for  
print reservation. Use FG to select  
the quantity. Press the H button.  
*1  
DPOF is a standard for storing automatic printout  
X
information from digital cameras.  
Print reservations can be set only for the  
images stored on the card. Insert a card  
with recorded images before making print  
reservations.  
NO  
DATE  
TIME  
DPOF reservations set by another DPOF  
device cannot be changed by this camera.  
Make changes using the original device.  
Making new DPOF reservations with this  
camera will erase the reservations made by  
the other device.  
MENU  
OK  
SET  
BACK  
5
Use FG to select the [X] (date  
print) screen option, and press the  
DPOF print reservations can be made for up  
to 999 images per card.  
H button.  
Submenu 2  
Application  
NO  
This prints the image only.  
Single-frame print  
This prints the image with the  
shooting date.  
reservations [<]  
DATE  
This prints the image with the  
shooting time.  
TIME  
1
Display the [SETUP] menu.  
“Using the Menu” (p. 4)  
PRINT ORDER  
2
From the playback menu q, select  
[PRINT ORDER] and then press the  
(
)
1
1
H button.  
SET  
PRINT ORDER  
CANCEL  
MENU  
OK  
SET  
BACK  
<
U
6
Use FG to select [SET], and press  
the H button.  
MENU  
OK  
SET  
EXIT  
40 EN  
Reserving one print each of all  
Resetting the print reservation  
data for selected images  
images on the card [U]  
1
1
Follow Steps 1 and 2 in [<] (p. 40).  
Follow Steps 1 and 2 in [<] (p. 40).  
2
2
3
4
Use FG to select [U], and press  
Use FG to select [<], and press  
the H button.  
the H button.  
3
Follow Steps 5 and 6 in [<].  
Use FG to select [KEEP] and  
press the H button.  
Resetting all print reservation  
data  
Use HI to select the image with  
the print reservation you want to  
cancel. Use FG to set the print  
quantity to “0”.  
1
Follow Steps 1 and 2 in [<] (p. 40).  
2
5
6
Use FG to select either [<] or  
If necessary, repeat Step 4, and then  
press the H button when nished.  
[U], and press the H button.  
PRINT ORDER SETTING  
PRINT ORDERED  
Use FG to select the [X] (date  
print) screen option, and press the  
H button.  
The settings are applied to the remaining images  
with the print reservation data.  
RESET  
KEEP  
MENU  
OK  
SET  
BACK  
7
Use FG to select [SET], and press  
the H button.  
3
Use FG to select [RESET], and  
press the H button.  
EN 41  
Usage Tips  
If the camera does not work as intended, or if  
an error message is displayed on the screen,  
and you are unsure of what to do, refer to the  
information below to x the problem(s).  
Monitor  
“Difcult to see”.  
Condensation*1 may have occurred. Turn off the  
power, and wait for the camera body to become  
acclimated to the surrounding temperature and dry  
out before taking pictures.  
Troubleshooting  
*1  
Dew drops can form in the camera when it is  
suddenly taken from a cold location into a warm,  
humid room.  
Battery  
“The camera does not work even when  
batteries are installed”.  
“Vertical lines appear on the screen”.  
This condition may occur when the camera is  
pointed at an extremely bright subject under a  
clear sky and so on. The lines do not appear,  
however, in the nal image.  
Insert recharged batteries in the correct direction.  
“Inserting the battery and the SD/SDHC memory  
card (sold separately)” (p. 10),“Charging the  
battery with the supplied USB-AC adapter” (p. 11)  
“The light is caught in the picture”.  
Battery performance may have been reduced  
temporarily due to low temperature. Take the  
batteries out of the camera, and warm them by  
putting them in your pocket for a while.  
Shooting with ash in dark situations results in  
an image with many ash reections on dust in  
the air.  
Date and time function  
Card/Internal memory  
“An error message is displayed”.  
“Error message” (p. 43)  
“Date and time settings return to the  
default setting”.  
If the batteries are removed and left out of the  
camera for about a day*2, the date and time  
settings return to the default setting, and must  
be reset.  
Shutter button  
“No picture is taken when the shutter  
button is pressed”.  
*2  
The time until the date and time settings return  
to the default setting varies depending on how  
long the batteries have been loaded.  
Cancel sleep mode.  
To save battery power, the camera automatically  
goes into sleep mode and the monitor turns off  
if there is no operation for 3 minutes when the  
camera is turned on. No picture is taken even if  
the shutter button is fully pressed in this mode.  
Operate the zoom buttons or other buttons to  
restore the camera from sleep mode before  
taking a picture. If the camera is left for another  
12 minutes, it automatically turns off. Press the  
n button to turn the camera on.  
“Setting the date, time and time zone” (p. 12)  
Miscellaneous  
“The camera makes a noise when taking  
pictures”.  
The camera may activate the lens and make a  
noise even if no operation is performed. This  
is because the camera automatically performs  
actions of auto focus as far as it is ready to shoot.  
Press the qbutton to switch to the shooting  
mode.  
Wait until #(ash charge) stops blinking before  
taking pictures.  
42 EN  
Error message  
Printer problem  
Rell the ink in the printer.  
When one of the messages below is  
NO INK  
displayed on the monitor, check the  
corrective action.  
Printer problem  
Remove the jammed paper.  
JAMMED  
Error message  
Corrective action  
Printer problem  
Return to the status where the  
printer can be used.  
SETTINGS  
CHANGED*3  
Card problem  
Insert a new card.  
CARD ERROR  
Printer problem  
Card problem  
Turn off the camera and printer,  
check the printer for any  
problems, and then turn the  
power on again.  
The card write-protect switch is  
set to the “LOCK” side. Release  
the switch.  
WRITE  
PROTECT  
PRINT ERROR  
Internal memory problem  
• Insert a card.  
• Erase unwanted images.*1  
Problem with selected image  
Use a computer to print.  
CANNOT PRINT*4  
MEMORY FULL  
Card problem  
• Replace the card.  
• Erase unwanted images.*1  
*1  
Before erasing important images, download them to  
a computer.  
All data will be erased.  
This is displayed, for instance, when the printer’s  
paper tray has been removed. Do not operate  
the printer while making the print settings on the  
camera.  
This camera may be unable to print images taken by  
other cameras.  
CARD FULL  
*2  
*3  
CARD SETUP  
Card problem  
Use FG to select [FORMAT],  
and press the H button. Next,  
use FG to select [YES], and  
press the H button.*2  
POWER OFF  
FORMAT  
OK  
*4  
SET  
Internal memory problem  
Use FG to select [MEMORY  
FORMAT], and press the  
H button. Next, use FG to  
select [YES], and press the  
H button.*2  
MEMORY SETUP  
POWER OFF  
MEMORY FORMAT  
OK  
SET  
Internal memory/Card problem  
Take pictures before viewing  
them.  
NO PICTURE  
Problem with selected image  
Use photo retouch software,  
etc. to view the image on a  
computer. If the image still  
cannot be viewed, the image le  
is corrupted.  
PICTURE  
ERROR  
Problem with selected image  
Use photo retouch software, etc.  
to edit the image on a computer.  
THE IMAGE  
CANNOT  
BE EDITED  
Battery problem  
Charge the battery.  
BATTERY  
EMPTY  
Connection problem  
Connect the camera and  
computer or printer correctly.  
NO  
CONNECTION  
Printer problem  
Load paper into the printer.  
NO PAPER  
EN 43  
Shooting tips  
When you are unsure of how to take a picture  
that you envision, refer to the information below.  
Fast-moving object  
Focusing  
“Focusing on the subject”  
The subject is not in the center  
of the frame  
Taking a picture of a subject not in the center  
of the screen  
After focusing on an object at the same distance  
as the subject, compose the shot, and take the  
picture.  
Camera shake  
Pressing the shutter button halfway (p. 14)  
Set [AF MODE] (p. 28) to [FACE/iESP]  
“Taking pictures without camera shake”  
Taking a picture in [AF TRACKING] mode  
(p. 28)  
Taking pictures using N mode (p. 20)  
(FE-4020/X-940)  
The camera tracks the subject movement  
automatically to focus on it continuously.  
Taking pictures using [IMAGE STABILIZER]  
(p. 28) (FE-4040)  
Taking a picture of subjects where autofocus  
Select C (SPORT) in s mode (p. 20)  
is difcult  
The C (SPORT) mode uses a fast shutter speed  
and can reduce the blur incurred by a moving  
subject.  
In the following cases, after focusing on an object  
(by pressing the shutter button halfway down) with  
high contrast at the same distance as the subject,  
compose the shot, and take the picture.  
Taking pictures at a high ISO sensitivity  
If a high ISO sensitivity is selected, pictures can  
be taken at a high shutter speed even at locations  
where a ash cannot be used.  
Subjects with low contrast  
“Selecting the ISO sensitivity” (p. 25)  
Exposure (brightness)  
“Taking pictures with the right  
brightness”  
When extremely bright objects  
appear in the center of the  
screen  
Taking pictures using [FILL IN] (p. 23) ash  
A subject against backlight is brightened.  
Taking pictures using exposure compensation  
(p. 24)  
Object with no vertical lines*1  
Adjust the brightness while viewing the screen  
for taking the picture. Normally, taking pictures of  
white subjects (such as snow) results in images  
that are darker than the actual subject. Use the  
exposure compensation to adjust in the positive  
(+) direction to express whites as they appear.  
When taking pictures of black subjects, on the  
other hand, it is effective to adjust in the negative  
(-) direction.  
*1  
It is also effective to compose the shot by holding the  
camera vertically to focus, and then returning to the  
horizontal position to take the picture.  
When objects are at different  
distances  
44 EN  
Playback/Editing tips  
Color hue  
“Taking pictures with colors at the same  
shade as they appear”  
Playback  
Taking pictures by selecting white balance  
(p. 25)  
“Playing images in the internal memory  
and card”  
Best results in most environments can normally  
be obtained with the [WB AUTO] setting, but for  
some subjects, you should try experimenting  
with different settings. (This is especially true for  
sunshade under a clear sky, mixed natural and  
articial light settings, and so on.)  
Remove the card when playing pictures in the  
internal memory  
“Inserting the battery and the SD/SDHC memory  
card (sold separately)” (p. 10)  
Editing  
Image quality  
“Erasing the sound recorded to a still  
image”  
“Taking sharper pictures”  
Record over the sound with silence when  
Taking pictures with the optical zoom  
Avoid using digital zoom (p. 16) to take pictures.  
Taking pictures at a low ISO sensitivity  
playing back the image  
“Adding sound to still images [R]” (p. 31)  
If the picture is taken with a high ISO sensitivity,  
noise (small colored spots and color unevenness  
that were not in the original image) can occur, and  
the image can appear grainy. The resulting image  
is grainier than with low ISO sensitivity as well.  
“Selecting the ISO sensitivity” (p. 25)  
Batteries  
“Making batteries last longer”  
Avoid any of the following operations when not  
actually taking pictures because they deplete  
the battery power  
Repeatedly pressing the shutter button  
halfway  
Repeatedly using the zoom  
Set [POWER SAVE] (p. 36) to [ON]  
EN 45  
Appendix  
Camera care  
Battery and AC adapter  
(included)  
Exterior  
This camera uses one Olympus lithium ion  
battery (LI-70B). No other type of batteries can  
be used.  
Wipe gently with a soft cloth. If the camera is  
very dirty, soak the cloth in mild soapy water  
and wring well. Wipe the camera with the  
damp cloth and then dry it with a dry cloth. If  
you have used the camera at the beach, use a  
cloth soaked in clean water and wrung well.  
Caution:  
There is a risk of explosion if the battery is  
replaced with the incorrect battery type.  
Dispose of the used battery following the  
instructions. (p. 52)  
Monitor  
Power consumption by the camera varies  
depending on which functions are used.  
During the conditions described below, power  
is consumed continuously and the battery  
becomes exhausted quickly.  
Wipe gently with a soft cloth.  
Lens  
Blow dust off the lens with a commercial  
blower, then wipe gently with a lens cleaner.  
The zoom is used repeatedly.  
Battery/AC adapter  
Wipe gently with a soft, dry cloth.  
The shutter button is pressed halfway  
repeatedly in shooting mode, activating the  
auto focus.  
A picture is displayed on the monitor for an  
extended period of time.  
Do not use strong solvents such as benzene  
or alcohol, or chemically treated cloth.  
Mold may form on the lens surface if the  
lens is left dirty.  
The camera is connected to a computer or  
printer.  
Using an exhausted battery may cause the  
camera to turn off without displaying the  
battery level warning.  
Storage  
When storing the camera for extended  
periods, remove the battery, AC adapter and  
card, and keep in a cool, dry place that is well  
ventilated.  
Periodically insert the battery and test the  
camera functions.  
The rechargeable battery is not fully charged  
at the time of purchase. Before use, charge the  
battery fully with the supplied F-2AC USB-AC  
adapter (hereafter referred to as AC adapter)  
or an optional AC adapter (F-1AC/D-7AC).  
When the included AC adapter is used,  
charging usually takes approximately 3 hours  
(varies on usage).  
The included AC adapter has been designed  
to be used only for charging. Make sure that  
operations such as shooting, viewing images  
and so on are not being used while the AC  
adapter is connected to the camera.  
The included AC adapter is designed to be  
used only with this camera. Other cameras  
cannot be charged with this AC adapter.  
Do not use with other devices.  
Avoid leaving the camera in places where  
chemical products are handled since this  
may result in corrosion.  
For plug-in type AC adapter:  
The included AC adapter is intended to be  
correctly orientated in a vertical or oor mount  
position.  
46 EN  
Using a separately sold AC  
adapter  
Using an SD/SDHC memory  
card  
A D-7AC AC adapter (sold separately) is useful  
for time-consuming tasks such as downloading  
images to a computer or when running a  
slideshow for a long period of time. A CB-MA1/  
CB-MA3 multi-adapter (sold separately) is  
required when using a D-7AC AC adapter with  
this camera. To charge the battery, turn the  
camera off and connect the D-7AC AC adapter.  
Use only AC adapters approved for use with this  
camera.  
A card (and internal memory) also corresponds  
to the lm that records images in a lm camera.  
Otherwise, the recorded images (data) can be  
erased, and retouching is also available with  
the use of a computer. Cards can be removed  
from the camera and exchanged, but this is  
not possible with the internal memory. Use of  
larger capacity cards enables you to take more  
pictures.  
SD/SDHC card write-protect switch  
The SD/SDHC card body has a write-protect  
switch. If you set the switch to the “LOCK”  
side, you will not be able to write to the card,  
delete data or format. Release the switch to  
enable writing.  
Using your AC adapter abroad  
The AC adapter can be used in most home  
electrical sources within the range of 100  
V to 240 V AC (50/60Hz) around the world.  
However, depending on the country or area  
you are in, the AC wall outlet may be shaped  
differently and the AC adapter may require  
a plug adapter to match the wall outlet. For  
details, ask at your local electrical shop or  
travel agent.  
LOCK  
Do not use travel voltage converters as they  
could damage your AC adapter.  
Cards compatible with this camera  
SD/SDHC memory cards (for more  
information, visit the Olympus website)  
EN 47  
Using a new card  
Readout/recording process of the card  
During shooting, the current memory  
indicator lights in red while the camera is  
writing data. Never open the battery/card  
compartment cover or unplug the USB  
cable. This can not only damage the image  
data but also render the internal memory or  
card unusable.  
Cards must be formatted with this camera  
before rst use or after being used with other  
cameras or computers.  
[MEMORY FORMAT]/[FORMAT] (p. 32)  
Checking the image saving location  
The memory indicator shows whether the  
internal memory or card is being used during  
shooting and playback.  
P
Current memory indicator  
v: Internal memory is being used  
w: Card is being used  
0.0  
WB  
AUTO  
ISO  
Current memory  
AUTO  
indicator  
14M  
P
4
Lights in red  
0.0  
WB  
AUTO  
ISO  
AUTO  
14M  
4
4/30  
Shooting mode  
’10/02/26 12:30  
Playback mode  
Even if [MEMORY FORMAT]/[FORMAT],  
[ERASE], [SEL. IMAGE], or [ALL ERASE]  
is performed, the data in the card is not  
completely erased. When disposing of  
the card, damage the card to prevent the  
disclosure of personal data.  
48 EN  
Number of storable pictures (still images)/Continuous recording length (movies) in the  
internal memory and SD/SDHC memory cards  
The gures for the number of storable still pictures and continuous recording length are approximate.  
The actual capacity varies with shooting conditions and the card used.  
Still images  
Number of storable still pictures  
IMAGE SIZE  
COMPRESSION  
Internal memory  
SD/SDHC memory card (1 GB)  
With sound Without sound With sound Without sound  
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
2
4
2
4
123  
242  
123  
244  
6 4288×3216  
4 3264×2448  
n 2560×1920  
3 2048×1536  
2 1600×1200  
1 1280×960  
7 640×480  
4
4
209  
211  
7
7
406  
414  
6
6
334  
340  
12  
10  
20  
16  
31  
25  
46  
82  
145  
15  
29  
12  
10  
20  
17  
34  
26  
52  
105  
193  
15  
31  
637  
658  
536  
545  
1,044  
865  
1,081  
890  
1,637  
1,316  
2,422  
4,326  
7,569  
797  
1,781  
1,376  
2,753  
5,506  
10,094  
829  
0 1920×1080  
1,553  
1,637  
Movies  
Continuous recording length  
Internal memory SD/SDHC memory card (1 GB)  
With sound Without sound With sound Without sound  
IMAGE SIZE  
FRAME RATE  
N
O
N
O
9 sec.  
19 sec.  
27 sec.  
53 sec.  
9 sec.  
19 sec.  
27 sec.  
55 sec.  
8 min. 34 sec.  
8 min. 36 sec.  
8 640×480  
17 min. 4 sec. 17 min. 13 sec.  
23 min. 49 sec. 24 min. 6 sec.  
47 min. 5 sec. 48 min. 12 sec.  
9 320×240  
The maximum le size of a single movie is 2 GB, regardless of the capacity of the card.  
Increasing the number of pictures that can be taken  
Either erase unwanted images, or connect the camera to a computer or other device to save  
the images, and then erase the images in the internal memory or card. [ERASE] (p. 18, 30),  
[SEL. IMAGE] (p. 30), [ALL ERASE] (p. 30), [MEMORY FORMAT]/[FORMAT] (p. 32)  
EN 49  
SAFETY PRECAUTIONS  
Handling the Camera  
WARNING  
Do not use the camera near ammable or  
explosive gases.  
Do not use the ash and LED on people  
(infants, small children, etc.) at close range.  
You must be at least 1 m (3 ft.) away from the  
faces of your subjects. Firing the ash too close  
to the subject’s eyes could cause a momentary  
loss of vision.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRICAL  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED OLYMPUS  
SERVICE PERSONNEL.  
Keep young children and infants away from  
the camera.  
An exclamation mark enclosed in a  
triangle alerts you to important operating  
and maintenance instructions in the  
documentation provided with the product.  
Always use and store the camera out of the  
reach of young children and infants to prevent  
the following dangerous situations which could  
cause serious injury:  
DANGER  
WARNING  
CAUTION  
If the product is used without observing  
the information given under this symbol,  
serious injury or death may result.  
Becoming entangled in the camera strap,  
causing strangulation.  
Accidentally swallowing the battery, cards or  
other small parts.  
Accidentally ring the ash into their own eyes  
or those of another child.  
Accidentally being injured by the moving parts  
of the camera.  
If the product is used without observing the  
information given under this symbol, injury  
or death may result.  
If the product is used without observing the  
information given under this symbol, minor  
personal injury, damage to the equipment,  
or loss of valuable data may result.  
WARNING!  
Do not look at the sun or strong lights with the  
camera.  
Do not use or store the camera in dusty or  
humid places.  
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,  
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO  
WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.  
Do not cover the ash with a hand while ring.  
Use SD/SDHC memory cards only. Never use  
other types of cards.  
If you accidently insert another type of card into  
the camera, contact an authorized distributor or  
service center. Do not try to remove the card by  
force.  
General Precautions  
Read All Instructions — Before you use the  
product, read all operating instructions. Save all  
manuals and documentation for future reference.  
Cleaning — Always unplug this product from the  
wall outlet before cleaning. Use only a damp  
cloth for cleaning. Never use any type of liquid or  
aerosol cleaner, or any type of organic solvent to  
clean this product.  
CAUTION  
Stop using the camera immediately if you  
notice any unusual odors, noise, or smoke  
around it.  
Attachments — For your safety, and to avoid  
damaging the product, use only accessories  
recommended by Olympus.  
Never remove the batteries with bare hands,  
Water and Moisture — For precautions on  
products with weatherproof designs, read the  
weatherproong sections.  
Location To avoid damage to the product, mount  
the product securely on a stable tripod, stand,  
or bracket.  
Power Source — Connect this product only to the  
power source described on the product label.  
Lightning — If a lightning storm occurs while using  
an AC adapter, remove it from the wall outlet  
immediately.  
which may cause a re or burn your hands.  
Never hold or operate the camera with wet  
hands.  
Do not leave the camera in places where it may  
be subject to extremely high temperatures.  
Doing so may cause parts to deteriorate and,  
in some circumstances, cause the camera to  
catch re. Do not use the AC adapter if it is  
covered (such as a blanket). This could cause  
overheating, resulting in re.  
Foreign Objects To avoid personal injury, never  
insert a metal object into the product.  
Heat — Never use or store this product near any  
heat source such as a radiator, heat register,  
stove, or any type of equipment or appliance that  
generates heat, including stereo ampliers.  
50 EN  
Handle the camera with care to avoid getting a  
low-temperature burn.  
If a battery leaks, becomes discolored or  
deformed, or becomes abnormal in any other way  
during operation, stop using the camera.  
If a battery leaks uid onto your clothing or skin,  
remove the clothing and ush the affected area  
with clean, running cold water immediately. If  
the uid burns your skin, seek medical attention  
immediately.  
When the camera contains metal parts,  
overheating can result in a low-temperature  
burn. Pay attention to the following:  
When used for a long period, the camera will  
get hot. If you hold on to the camera in this  
state, a low-temperature burn may be caused.  
In places subject to extremely cold  
Never subject batteries to strong shocks or  
continuous vibration.  
temperatures, the temperature of the camera’s  
body may be lower than the environmental  
temperature. If possible, wear gloves when  
handling the camera in cold temperatures.  
CAUTION  
Before loading, always inspect the battery carefully  
for leaks, discoloration, warping, or any other  
abnormality.  
The battery may become hot during prolonged  
use. To avoid minor burns, do not remove it  
immediately after using the camera.  
Always unload the battery from the camera before  
storing the camera for a long period.  
Be careful with the strap.  
Be careful with the strap when you carry the  
camera. It could easily catch on stray objects  
and cause serious damage.  
Battery Handling Precautions  
Follow these important guidelines to prevent  
batteries from leaking, overheating, burning,  
exploding, or causing electrical shocks or  
burns.  
Caution for Usage Environment  
To protect the high-precision technology contained  
in this product, never leave the camera in the  
places listed below, no matter if in use or storage:  
Places where temperatures and/or humidity  
are high or go through extreme changes.  
Direct sunlight, beaches, locked cars, or near  
other heat sources (stove, radiator, etc.) or  
humidiers.  
DANGER  
The camera uses a lithium ion battery specied by  
Olympus. Charge the battery with the specied AC  
adapter. Do not use any other AC adapters.  
Never heat or incinerate batteries.  
Take precautions when carrying or storing  
batteries to prevent them from coming into contact  
with any metal objects such as jewelry, pins,  
fasteners, etc.  
Never store batteries where they will be  
exposed to direct sunlight, or subjected to high  
temperatures in a hot vehicle, near a heat source,  
etc.  
To prevent causing battery leaks or damaging their  
terminals, carefully follow all instructions regarding  
the use of batteries. Never attempt to disassemble  
a battery or modify it in any way, solder, etc.  
If battery uid gets into your eyes, ush your eyes  
immediately with clear, cold running water and  
seek medical attention immediately.  
Always store batteries out of the reach of small  
children. If a child accidentally swallows a battery,  
seek medical attention immediately.  
In sandy or dusty environments.  
Near ammable items or explosives.  
In wet places, such as bathrooms or in the rain.  
When using products with weatherproof designs,  
read their manuals as well.  
In places prone to strong vibrations.  
Never drop the camera or subject it to severe  
shocks or vibrations.  
When mounted on a tripod, adjust the position of  
the camera with the tripod head. Do not twist the  
camera.  
Do not touch electric contacts on cameras.  
Do not leave the camera pointed directly at the  
sun. This may cause lens or shutter curtain  
damage, color failure, ghosting on the CCD, or  
may possibly cause res.  
Do not push or pull severely on the lens.  
Before storing the camera for a long period,  
remove the batteries. Select a cool, dry location  
for storage to prevent condensation or mold from  
forming inside the camera. After storage, test the  
camera by turning it on and pressing the shutter  
button to make sure that it is operating normally.  
Always observe the operating environment  
restrictions described in the camera’s manual.  
WARNING  
Keep batteries dry at all times.  
To prevent batteries from leaking, overheating,  
or causing a re or explosion, use only batteries  
recommended for use with this product.  
Insert the battery carefully as described in the  
operating instructions.  
If rechargeable batteries have not been recharged  
within the specied time, stop charging them and  
do not use them.  
Do not use a battery if it is cracked or broken.  
EN 51  
Battery Handling Precautions  
Disclaimer of Warranty  
This camera uses a lithium ion battery specied by  
Olympus. Do not use any other type of battery.  
If the battery’s terminals get wet or greasy, camera  
contact failure may result. Wipe the battery well  
with a dry cloth before use.  
Always charge a battery when using it for the rst  
time, or if it has not been used for a long period.  
When operating the camera with battery power  
at low temperatures, try to keep the camera and  
spare battery as warm as possible. A battery that  
has run down at low temperatures may be restored  
after it is warmed at room temperature.  
The number of pictures you can take may vary  
depending on the shooting conditions or battery.  
Before going on a long trip, and especially before  
traveling abroad, purchase extra batteries. A  
recommended battery may be difcult to obtain  
while traveling.  
Please recycle batteries to help save our planet’s  
resources. When you throw away dead batteries,  
be sure to cover their terminals and always  
observe local laws and regulations.  
Olympus makes no representations or warranties,  
either expressed or implied, by or concerning any  
content of these written materials or software, and  
in no event shall be liable for any implied warranty  
of merchantability or tness for any particular  
purpose or for any consequential, incidental or  
indirect damages (including but not limited to  
damages for loss of business prots, business  
interruption and loss of business information)  
arising from the use or inability to use these  
written materials or software or equipment. Some  
countries do not allow the exclusion or limitation  
of liability for consequential or incidental damages  
or of the implied warranty, so the above limitations  
may not apply to you.  
Olympus reserves all rights to this manual.  
Warning  
Unauthorized photographing or use of  
copyrighted material may violate applicable  
copyright laws. Olympus assumes no  
responsibility for unauthorized photographing,  
use or other acts that infringe upon the rights of  
copyright owners.  
LCD Monitor  
Do not push the monitor forcibly; otherwise the  
image may become vague, resulting in a playback  
mode failure or damage to the monitor.  
Copyright Notice  
A strip of light may appear on the top/bottom of the  
monitor, but this is not a malfunction.  
When a subject is viewed diagonally in the  
camera, the edges may appear zigzagged on the  
monitor. This is not a malfunction; it will be less  
noticeable in playback mode.  
In places subject to low temperatures, the LCD  
monitor may take a long time to turn on or its  
color may change temporarily. When using the  
camera in extremely cold places, it is a good idea  
to occasionally place it in a warm place. An LCD  
monitor exhibiting poor performance due to low  
temperatures will recover in normal temperatures.  
The LCD used for the monitor is made with  
high-precision technology. However, black spots  
or bright spots of light may appear constantly on  
the LCD Monitor. Due to its characteristics or the  
angle at which you are viewing the monitor, the  
spot may not be uniform in color and brightness.  
This is not a malfunction.  
All rights reserved. No part of these written  
materials or this software may be reproduced  
or used in any form or by any means, electronic  
or mechanical, including photocopying and  
recording or the use of any type of information  
storage and retrieval system, without the prior  
written permission of Olympus. No liability  
is assumed with respect to the use of the  
information contained in these written materials  
or software, or for damages resulting from  
the use of the information contained therein.  
Olympus reserves the right to alter the features  
and contents of this publication or software  
without obligation or advance notice.  
Legal and Other Notices  
Olympus makes no representations or warranties  
regarding any damages, or benet expected by  
using this unit lawfully, or any request from a third  
person, which are caused by the inappropriate use  
of this product.  
Olympus makes no representations or warranties  
regarding any damages or any benet expected  
by using this unit lawfully which are caused by  
erasing picture data.  
52 EN  
FCC Notice  
Radio and Television Interference  
Changes or modications not expressly approved  
by the manufacturer may void the user’s authority  
to operate this equipment. This equipment has  
been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference  
in a residential installation.  
This equipment generates, uses, and can radiate  
radio frequency energy and, if not installed  
and used in accordance with the instructions,  
may cause harmful interference to radio  
communications.  
However, there is no guarantee that interference  
will not occur in a particular installation. If this  
equipment does cause harmful interference  
to radio or television reception, which can be  
determined by turning the equipment off and  
on, the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
Adjust or relocate the receiving antenna.  
Increase the distance between the camera and  
receiver.  
Connect the equipment to an outlet on a circuit  
different from that to which the receiver is  
connected.  
Consult your dealer or an experienced radio/TV  
technician for help. Only the OLYMPUS-supplied  
USB cable should be used to connect the  
camera to USB enabled personal computers  
(PC).  
Any unauthorized changes or modications to  
this equipment would void the user’s authority  
to operate it.  
Use Only Dedicated Rechargeable  
Battery and AC adapter  
We strongly recommend that you use only  
the genuine Olympus dedicated rechargeable  
battery and AC adapter with this camera. Using  
a non-Olympus rechargeable battery and/or AC  
adapter may result in re or personal injury due  
to leakage, heating, ignition or damage to the  
battery. Olympus does not assume any liability  
for accidents or damage that may result from the  
use of a battery and/or AC adapter that are not  
genuine Olympus accessories.  
EN 53  
Representative plug of power supply cord of countries/regions around the  
world  
A Type  
B Type  
BF Type  
B3 Type  
C Type  
SE Type  
O Type  
(American Type) (British Type) (British Type) (British Type) (CEE Type)  
(CEE Type) (Oceania Type)  
The representative supply voltage and plug type are described in this chart.  
Depending on the area, different types of plugs and supply voltages are used.  
Attention: Power cord meeting demands from each country shall be used.  
-
For only the United States  
Use a UL Listed, 1.5 - 4.5 m (5 - 15 ft), Type SPT-2 or NISPT-2, AWG no. 18 power supply cord, rated for  
125 V 7 A, with a non-polarized NEMA 1-15P plug rated for 125 V 15 A”.  
Europe  
Countries/Regions Voltage  
North America  
Countries/Regions Voltage  
Frequency (Hz) Plug type  
Frequency (Hz) Plug type  
Austria  
Belgium  
Czech  
230  
230  
220  
230  
230  
230  
230  
220  
220  
230  
230  
220  
230  
230  
230  
220  
230  
220  
220  
220  
127/230  
230  
230  
240  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
C
C
C
C
C
C
C
C
C
C
C/BF  
C
C
C
C
C
C
C
Canada  
USA  
120  
120  
60  
60  
A
A
Denmark  
Finland  
France  
Germany  
Greece  
Hungary  
Iceland  
Ireland  
Central America  
Countries/Regions Voltage  
Frequency (Hz) Plug type  
Bahamas  
Costa Rica  
Cuba  
Dominican (rep)  
El Salvador  
Guatemala  
Honduras  
Jamaica  
120/240  
110  
110/220  
110  
110  
120  
110  
110  
120/127  
120/240  
110/220  
60  
60  
60  
60  
60  
60  
60  
50  
60  
60  
60  
A
A
A/C  
A
A
A
A
A
A
A
Italy  
Luxemburg  
Netherlands  
Norway  
Poland  
Portugal  
Romania  
Russia  
Slovak  
Spain  
Sweden  
Switzerland  
UK  
Mexico  
Nicaragua  
Panama  
A
South America  
Countries/Regions Voltage  
Argentina  
Brazil  
Chile  
Colombia  
Peru  
Venezuela  
C
C
C
C
C
BF  
Frequency (Hz) Plug type  
220  
127/220  
220  
120  
220  
50  
60  
50  
60  
60  
60  
C/BF/O  
A/C  
C
A
A/C  
A
120  
Asia  
Countries/Regions Voltage  
Frequency (Hz) Plug type  
Middle East  
China  
Hong Kong  
India  
Indonesia  
Japan  
Korea (rep)  
Malaysia  
Philippines  
Singapore  
Taiwan  
220  
200/220  
230/240  
127/230  
100  
220  
240  
220/230  
230  
110  
50  
50  
50  
50  
50/60  
60  
50  
60  
50  
60  
A
BF  
C
C
A
Countries/Regions Voltage  
Frequency (Hz) Plug type  
Iran  
Iraq  
220  
220  
50  
50  
50  
50  
50  
50  
C/BF  
C/BF  
C
A/C/BF  
C
Israel  
230  
Saudi Arabia  
Turkey  
UAE  
127/220  
220  
240  
C
BF  
A/C  
BF  
A
C/BF  
Africa  
Countries/Regions Voltage  
Frequency (Hz) Plug type  
Thailand  
Vietnam  
220  
220  
50  
50  
C/BF  
A/C  
Algeria  
Congo (dem)  
Egypt  
Ethiopia  
Kenya  
Nigeria  
South Africa  
Tanzania  
Tunisia  
127/220  
220  
220  
220  
240  
230  
220/230  
230  
50  
50  
50  
50  
50  
50  
50  
50  
50  
C
C
C
Oceania  
Countries/Regions Voltage  
Australia  
New Zealand  
C
Frequency (Hz) Plug type  
C/BF  
C/BF  
C/BF  
C/BF  
C
240  
230/240  
50  
50  
O
O
220  
54 EN  
Olympus shall not be obligated to perform  
preventive maintenance, installation,  
deinstallation, or maintenance.  
For customers in North and South  
America  
For customers in USA  
Declaration of Conformity  
Olympus reserves the right to (i) use  
reconditioned, refurbished, and/or serviceable  
used parts (that meet Olympus’s quality  
assurance standards) for warranty or any other  
repairs and (ii) make any internal or external  
design and/or feature changes on or to its  
products without any liability to incorporate such  
changes on or to the Products.  
Model Number  
:FE-4040/FE-4020/  
X-940  
Trade Name  
Responsible Party  
:OLYMPUS  
:
Address  
:3500 Corporate  
Parkway, P.O. Box  
610, Center Valley, PA  
18034-0610, U.S.A.  
:484-896-5000  
WHAT IS NOT COVERED BY THIS  
LIMITED WARRANTY  
Excluded from this limited warranty and not  
warranted by Olympus in any fashion, either  
express, implied, or by statute, are:  
Telephone Number  
Tested To Comply With FCC Standards  
FOR HOME OR OFFICE USE  
(a) products and accessories not manufactured by  
Olympus and/or not bearing the “OLYMPUS” brand  
label (the warranty coverage for products and  
accessories of other manufacturers, which may be  
distributed by Olympus, is the responsibility of the  
manufacturers of such products and accessories  
in accordance with the terms and duration of such  
manufacturers’ warranties);  
This device complies with Part 15 of the FCC rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference  
received, including interference that may cause  
undesired operation.  
(b) any Product which has been disassembled,  
repaired, tampered with, altered, changed, or  
modied by persons other than Olympus’s own  
authorized service personnel unless repair by  
others is made with the written consent of Olympus;  
(c) defects or damage to the Products resulting  
from wear, tear, misuse, abuse, negligence,  
sand, liquids, impact, improper storage,  
nonperformance of scheduled operator and  
maintenance items, battery leakage, use of non-  
“OLYMPUS” brand accessories, consumables, or  
supplies, or use of the Products in combination  
with non-compatible devices;  
For customers in Canada  
This Class B digital apparatus meets all  
requirements of the Canadian Interference-  
Causing Equipment Regulations.  
OLYMPUS WORLDWIDE LIMITED  
WARRANTY - IMAGING PRODUCTS  
Olympus warrants that the enclosed Olympus®  
imaging product(s) and related Olympus®  
accessories (individually a “Product” and  
collectively the “Products”) will be free from  
defects in materials and workmanship under  
normal use and service for a period of one (1)  
year from the date of purchase.  
If any Product proves to be defective within the  
one-year warranty period, the customer must  
return the defective Product to any of Olympus  
Service Centers, following the procedure  
set forth below (See “WHAT TO DO WHEN  
SERVICE IS NEEDED”).  
(d) software programs;  
(e) supplies and consumables (including but not  
limited to lamps, ink, paper, lm, prints, negatives,  
cables and batteries); and/or  
(f) Products which do not contain a validly placed  
and recorded Olympus serial number, unless they  
are a model on which Olympus does not place  
and record serial numbers.  
EXCEPT FOR THE LIMITED WARRANTY SET  
FORTH ABOVE, OLYMPUS MAKES NO AND  
DISCLAIMS ALL OTHER REPRESENTATIONS,  
GUARANTIES, CONDITIONS, AND  
Olympus, at its sole discretion, will repair,  
replace, or adjust the defective Product, provided  
that Olympus investigation and factory inspection  
disclose that (a) such defect developed under  
normal and proper use and (b) the Product is  
covered under this limited warranty.  
Repair, replacement, or adjustment of defective  
Products shall be Olympus’s sole obligation and  
the customer’s sole remedy hereunder.  
WARRANTIES CONCERNING THE  
PRODUCTS, WHETHER DIRECT OR INDIRECT,  
EXPRESS OR IMPLIED, OR ARISING UNDER  
ANY STATUTE, ORDINANCE, COMMERCIAL  
USAGE OR OTHERWISE, INCLUDING BUT  
NOT LIMITED TO ANY WARRANTY OR  
The customer is liable and shall pay for shipment  
of the Products to the Olympus Service Center.  
REPRESENTATION AS TO THE SUITABILITY,  
EN 55  
DURABILITY, DESIGN, OPERATION, OR  
CONDITON OF THE PRODUCTS (OR ANY  
PART THEREOF) OR THE MERCHANTABILITY  
OF THE PRODUCTS OR THEIR FITNESS FOR  
A PARTICULAR PURPOSE, OR RELATING  
TO THE INFRINGEMENT OF ANY PATENT,  
COPYRIGHT, OR OTHER PROPRIETARY  
RIGHT USED OR INCLUDED THEREIN.  
IF ANY IMPLIED WARRANTIES APPLY AS  
A MATTER OF LAW, THEY ARE LIMITED  
IN DURATION TO THE LENGTH OF THIS  
LIMITED WARRANTY.  
SOME STATES MAY NOT RECOGNIZE  
A DISCLAIMER OR LIMITATION OF  
WARRANTIES AND/OR LIMITATION OF  
LIABILITY SO THE ABOVE DISCLAIMERS AND  
EXCLUSIONS MAY NOT APPLY.  
THE CUSTOMER MAY ALSO HAVE DIFFERENT  
AND/OR ADDITIONAL RIGHTS AND REMEDIES  
THAT VARY FROM STATE TO STATE.  
THE CUSTOMER ACKNOWLEDGES AND  
AGREES THAT OLYMPUS SHALL NOT  
BE RESPONSIBLE FOR ANY DAMAGES  
THAT THE CUSTOMER MAY INCUR FROM  
DELAYED SHIPMENT, PRODUCT FAILURE,  
PRODUCT DESIGN, SELECTION, OR  
PRODUCTION, IMAGE OR DATA LOSS OR  
IMPAIRMENT OR FROM ANY OTHER CAUSE,  
WHETHER LIABILITY IS ASSERTED IN  
CONTRACT, TORT (INCLUDING NEGLIGENCE  
AND STRICT PRODUCT LIABILITY) OR  
OTHERWISE. IN NO EVENT SHALL OLYMPUS  
BE LIABLE FOR ANY INDIRECT, INCIDENTAL,  
CONSEQUENTIAL OR SPECIAL DAMAGES OF  
ANY KIND (INCLUDING WITHOUT LIMITATION  
LOSS OF PROFITS OR LOSS OF USE),  
WHETHER OR NOT OLYMPUS SHALL BE OR  
SHOULD BE AWARE OF THE POSSIBILITY OF  
SUCH POTENTIAL LOSS OR DAMAGE.  
WHAT TO DO WHEN SERVICE IS NEEDED  
The customer must transfer any image or other  
data saved on a Product to another image or  
data storage medium and/or remove any lm  
from the Product prior to sending the Product to  
Olympus for service.  
IN NO EVENT SHALL OLYMPUS BE  
RESPONSIBLE FOR SAVING, KEEPING OR  
MAINTAINING ANY IMAGE OR DATA SAVED  
ON A PRODUCT RECEIVED BY IT FOR  
SERVICE, OR ON ANY FILM CONTAINED  
WITHIN A PRODUCT RECEIVED BY IT  
FOR SERVICE, NOR SHALL OLYMPUS BE  
RESPONSIBLE FOR ANY DAMAGES IN  
THE EVENT ANY IMAGE OR DATA IS LOST  
OR IMPAIRED WHILE SERVICE IS BEING  
PERFORMED (INCLUDING, WITHOUT  
LIMITATION, DIRECT, INDIRECT, INCIDENTAL,  
CONSEQUENTIAL OR SPECIAL DAMAGES,  
LOSS OF PROFITS OR LOSS OF USE),  
WHETHER OR NOT OLYMPUS SHALL BE OR  
SHOULD BE AWARE OF THE POSSIBILITY OF  
SUCH POTENTIAL LOSS OR IMPAIRMENT.  
Package the Product carefully using ample  
padding material to prevent damage in transit  
and either deliver it to the Authorized Olympus  
Dealer that sold you the Product or ship it  
postage prepaid and insured to any of our  
Olympus Service Centers.  
When returning Products for service, your  
package should include the following:  
1
2
Sales receipt showing date and place of  
purchase.  
Copy of this limited warranty bearing the  
Product serial number corresponding to the  
serial number on the Product (unless it is a  
model on which Olympus does not place and  
record serial numbers).  
3
4
A detailed description of the problem.  
Sample prints, negatives, digital prints (or les on  
disk) if available and related to the problem.  
Representations and warranties made by any  
person, including but not limited to dealers,  
representatives, salespersons, or agents of  
Olympus, which are inconsistent or in conict  
with or in addition to the terms of this limited  
warranty, shall not be binding upon Olympus  
unless reduced to writing and approved by an  
expressly authorized ofcer of Olympus.  
This limited warranty is the complete and  
exclusive statement of warranty which  
When service is completed, the Product will be  
returned to you postage prepaid.  
WHERE TO SEND PRODUCT FOR  
SERVICE  
See “WORLDWIDE WARRANTY” for the  
nearest service center.  
Olympus agrees to provide with respect to the  
Products and it shall supersede all prior and  
contemporaneous oral or written agreements,  
understandings, proposals, and communications  
pertaining to the subject matter hereof.  
This limited warranty is exclusively for the  
benet of the original customer and cannot be  
transferred or assigned.  
INTERNATIONAL WARRANTY SERVICE  
International warranty service is available under  
this warranty.  
56 EN  
affect the customer’s legal warranty rights under  
the applicable national legislation governing the  
sale of consumer goods mentioned above.  
This Guarantee does not cover the following  
and the customer will be required to pay repair  
charge, even for defects occurring within the  
Guarantee period referred to above.  
For customers in Europe  
“CE” mark indicates that this product complies  
with the European requirements for safety,  
health, environment and customer protection.  
“CE” mark cameras are intended for sales in  
Europe.  
2
a. Any defect that occurs due to mishandling  
(such as an operation performed that is not  
mentioned in the Handling Care or other  
sections of the instructions, etc.)  
b. Any defect that occurs due to repair,  
modication, cleaning, etc. performed by  
anyone other than Olympus or an Olympus  
authorized service station.  
This symbol [crossed-out wheeled bin WEEE  
Annex IV] indicates separate collection of waste  
electrical and electronic equipment in the EU  
countries.  
Please do not throw the equipment into the  
domestic refuse.  
Please use the return and collection systems  
available in your country for the disposal of this  
product.  
c. Any defect or damage that occurs due to  
transport, a fall, shock, etc. after purchase of  
the product.  
d. Any defect or damage that occurs due to re,  
earthquake, ood damage, thunderbolt, other  
natural disasters, environmental pollution and  
irregular voltage sources.  
This symbol [crossed-out wheeled bin Directive  
2006/66/EC Annex II] indicates separate  
collection of waste batteries in the EU countries.  
Please do not throw the batteries into the  
domestic refuse. Please use the return and  
collection systems available in your country for  
the disposal of the waste batteries.  
e. Any defect that occurs due to careless or  
improper storage (such as keeping the  
product under conditions of high temperature  
and humidity, near insect repellents such as  
naphthalene or harmful drugs, etc.), improper  
maintenance, etc.  
f. Any defect that occurs due to exhausted  
batteries, etc.  
g. Any defect that occurs due to sand, mud, etc.  
entering the inside of the product casing.  
h. When the Guarantee Certicate is not  
returned with the product.  
i. When any alterations whatsoever are made to  
the Guarantee Certicate regarding the year,  
month and date of purchase, the customer’s  
name, the dealer’s name, and the serial  
number.  
j. When proof of purchase is not presented with  
this Guarantee Certicate.  
This Guarantee applies to the product only; the  
Guarantee does not apply to any other accessory  
equipment, such as the case, strap, lens cap and  
batteries.  
Olympus’s sole liability under this Guarantee shall  
be limited to repairing or replacing the product.  
Any liability under the Guarantee for indirect  
or consequential loss or damage of any kind  
incurred or suffered by the customer due to a  
defect of the product, and in particular any loss  
or damage caused to any lenses, lms, other  
equipment or accessories used with the product  
or for any loss resulting from a delay in repair or  
loss of data, is excluded. Compelling regulations  
by law remain unaffected by this.  
Provisions of warranty  
1
If this product proves to be defective, although it  
has been used properly (in accordance with the  
written Handling Care and Operating instructions  
supplied with it), during the applicable national  
warranty period and has been purchased from  
an authorized Olympus distributor within the  
business area of Olympus Europa Holding GmbH  
com this product will be repaired, or at Olympus’s  
option replaced, free of charge. To claim under  
this warranty the customer must take the product  
before the end of the applicable national warranty  
period to the dealer where the product was  
purchased or any other Olympus service station  
within the business area of Olympus Europa  
Holding GmbH as stipulated on the website:  
period of the World Wide Guarantee the customer  
may turn the product in at any Olympus service  
station. Please notice that not in all countries  
such Olympus service station exists.  
3
4
2
The customer shall transport the product to the  
dealer or Olympus authorized service station  
at his own risk and shall be responsible for any  
costs incurred in transporting the product.  
Provisions of Guarantee  
1
“OLYMPUS IMAGING CORP., Shinjuku  
Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku,  
Tokyo 163-0914, Japan grants a one year World  
Wide Guarantee. This worldwide Guarantee  
must be presented at an Olympus authorized  
repair service station before any repair can  
be made under conditions of this Guarantee.  
This Guarantee is valid only if the Guarantee  
Certicate and proof of purchase are presented  
at the Olympus repair service station. Please note  
that this Guarantee is in addition to and does not  
EN 57  
Notes regarding Guarantee  
maintenance  
1
This Guarantee will only be valid if the Guarantee  
Certicate is duly completed by Olympus or an  
authorized dealer or other documents contain  
sufcient proof. Therefore, please make sure  
that your name, the name of the dealer, the  
serial number and the year, month and date of  
purchase are all completed or the original invoice  
or the sales receipt (indicating the dealer’s  
name, the date of purchase and product type) is  
attached to this Guarantee Certicate. Olympus  
reserves the right to refuse free-of-charge service  
if neither Guarantee Certicate is completed  
nor the above document is attached or if the  
information contained in it is incomplete or  
illegible.  
2
Since this Guarantee Certicate will not be re-  
issued, keep it in a safe place.  
*
Please refer to the list on the web site: http://  
Olympus service network.  
Trademarks  
IBM is a registered trademark of International  
Business Machines Corporation.  
Microsoft and Windows are registered trademarks  
of Microsoft Corporation.  
Macintosh is a trademark of Apple Inc.  
SDHC logo is a trademark.  
All other company and product names are  
registered trademarks and/or trademarks of their  
respective owners.  
The standards for camera le systems referred to  
in this manual are the “Design rule for Camera File  
system/DCF” standards stipulated by the Japan  
Electronics and Information Technology Industries  
Association (JEITA).  
58 EN  
SPECIFICATIONS  
Camera  
Product type  
:
Digital camera (for shooting and displaying)  
Recording system  
Still pictures  
:
:
Digital recording, JPEG (in accordance with Design rule for Camera File  
system (DCF))  
Applicable standards  
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III,  
PictBridge  
Sound with still pictures  
:
:
:
Wave format  
Movie  
AVI Motion JPEG  
Memory  
Internal memory  
SD memory card  
SDHC memory card  
No. of effective pixels  
Image pickup device  
Lens  
:
:
:
13,800,000 pixels  
1/2.33” CCD (primary color lter), 14,500,000 pixels (gross)  
Olympus lens 4.7 to 18.6 mm, f2.6 to 5.9  
(equivalent to 26 to 105 mm on a 35 mm camera)  
Photometric system  
Shutter speed  
:
:
:
Digital ESP metering system  
4 to 1/2000 sec.  
Shooting range  
0.6 m (2.0 ft.) to (W), 1.0 m (3.3 ft.) to (T) (normal)  
0.2 m (0.5 ft.) to (W), 0.6 m (2.0 ft.) to (T) (macro mode)  
0.04 m (0.13 ft.) to (super macro mode)  
Monitor  
:
:
:
2.7” TFT color LCD display, 230,000 dots  
Multi-connector (DC-IN jack, USB connector, A/V OUT jack)  
2000 up to 2099  
Connector  
Automatic calendar system  
Operating environment  
Temperature  
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/  
-20 °C to 60 °C (-4 °F to 140 °F) (storage)  
Humidity  
:
:
30 % to 90 % (operation)/10 % to 90 % (storage)  
Power supply  
One Olympus lithium ion battery (LI-70B) or an AC adapter (sold  
separately)  
Dimensions  
Weight  
:
FE-4040: 96.8 mm (W) × 56.2 mm (H) × 23.1 mm (D)  
(3.8 × 2.2 × 0.9 in.) (excluding protrusions)  
FE-4020/X-940: 95.0 mm (W) × 56.2 mm (H) × 22.8 mm (D)  
(3.7 × 2.2 × 0.9 in.) (excluding protrusions)  
:
FE-4040: 137 g (4.8 oz) (including battery and card)  
FE-4020/X-940: 128 g (4.5 oz) (including battery and card)  
EN 59  
Lithium ion battery (LI-70B)  
Product type  
:
:
:
:
Lithium ion rechargeable battery  
DC 3.7 V  
Standard voltage  
Standard capacity  
Battery life  
650 mAh  
Approx. 300 full charges (varies on usage)  
Operating environment  
Temperature  
:
0°C to 40°C (32°F to 104°F) (charging)/  
-10°C to 60°C (14°F to 140°F) (operation)/  
-20°C to 35°C (-4°F to 95°F) (storage)  
Dimensions  
Weight  
:
:
32.2 mm (W) × 40.5 mm (H) × 5.1 mm (D) (1.3 × 1.6 × 0.2 in.)  
Approx. 15 g (0.5 oz)  
USB-AC adapter (F-2AC)  
Model No.  
:
:
:
:
F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B  
AC 100 to 240 V (50/60 Hz)  
DC 5 V, 500 mA  
Power requirements  
Output  
Charging time  
Operating environment  
Temperature  
Approx. 3 hours  
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/  
-20 °C to 60 °C (-4 °F to 140 °F) (storage)  
Dimensions  
Weight  
:
:
50.0 mm (W) × 54.0 mm (H) × 22.0 mm (D) (2.0 × 2.1 × 0.9 in.)  
Approx. 46 g (1.6 oz) (F-2AC-1A)/Approx. 42 g (1.5 oz) (F-2AC-2A)/  
Approx. 44 g (1.6 oz) (F-2AC-1B)/Approx. 40 g (1.4 oz) (F-2AC-2B)  
Design and specications subject to change without notice.  
60 EN  
VN708601  

Raypak 0030B User Manual
PYLE Audio View Series PLDVD132 User Manual
ProMaster RL60 User Manual
Proficient Audio Systems M4 User Manual
Philips NV GS120EB User Manual
Philips Blu ray Player BDP3200 User Manual
Pelco Camera Lens 13ZD55X30(P) (CE) User Manual
Panasonic ET DLE050 User Manual
Panasonic CY VM5800U User Manual
Mellerware ROBOT 300 85200 User Manual