Olympus SZ 20 User Manual

DIGITAL CAMERA  
SZ-10/SZ-20  
Instruction Manual  
Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these  
instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for  
future reference.  
We recommend that you take test shots to get accustomed to your camera before taking important photographs.  
In the interest of continually improving products, Olympus reserves the right to update or modify information  
contained in this manual.  
This manual covers the SZ-10 and SZ-20. The camera illustrations on this manual is of SZ-10. Unless otherwise  
specied, the explanation about these illustrations is provided for SZ-10 and SZ-20.  
Camera Settings  
Using the Direct Buttons  
Frequently used functions can be accessed using the direct buttons.  
Zoom lever (p. 21, 24)  
Shutter button (p. 20, 60)  
R button (record movies) (p. 20)  
qbutton (switching between  
shooting and playback) (p. 20,  
22, 49)  
m button (p. 6)  
E button (camera guide/  
menu guide) (p. 26)  
3
EN  
Operation guide  
Wheel controller  
F (up) /  
The symbols FGHI displayed for image selections  
and settings indicate that the wheel controller is to  
be used by pressing, not turning, the wheel controller  
sections shown on the right.  
INFO button (changing information  
display) (p. 22, 25)  
4/30  
X
Y
M
D
Time  
14M  
NORM  
Y/M/D  
2011.02.26 00:00  
FILE  
100 0004  
’11/02/26 00:00  
H (left)  
I (right)  
OK  
Print  
More  
MENU  
OK  
Set  
Single Print  
Cancel  
Operation guides displayed at the bottom of the screen  
indicate that the m button, A button, or zoom lever  
A button  
can be used.  
G (down) /  
D button (erase) (p. 24)  
1
Reset  
2
Image Size  
Compression  
Shadow Adjust  
AF Mode  
14M  
Normal  
Auto  
The wheel controller can also be used  
to change the selections.  
1
2
3
Face/iESP  
ESP  
ESP/  
Digital Zoom  
Off  
4/30  
MENU  
OK  
Set  
Exit  
OK  
Set  
OK  
MENU  
Erase/Cancel  
Operation guide  
4
EN  
Using the Menu  
Use the menu to change camera settings such as the shooting mode.  
There may be menus that are unavailable depending on other related settings or the shooting mode.  
Function menu  
Press H during shooting to display the function menu. The function menu is used to choose the shooting mode  
and provides access to frequently used shooting settings.  
Selected option  
Shooting mode  
Program Auto  
3D  
P
Function menu  
Setup menu  
0.0  
WB  
AUTO  
ISO  
AUTO  
14M  
4
Shooting  
To select the shooting mode  
Use HI to select the shooting mode and press the A button.  
To select the function menu  
Use FG to select a menu and use HI to select a menu option. Press the A  
button to set the function menu.  
5
EN  
Setup menu  
Press the m button during shooting or playback to display the setup menu. The setup menu provides access  
to a variety of camera settings, including options not listed in the function menu, display options, and the time and  
date.  
1
Press the m button.  
The setup menu is displayed.  
4
Use FG to select the desired submenu 2  
and then press the A button.  
Once a setting is selected, the display returns to  
the previous screen.  
1
Reset  
2
Image Size  
14M  
Normal  
Auto  
Compression  
Shadow Adjust  
AF Mode  
There may be additional operations. “Menu  
Settings” (p. 38 to 54)  
1
2
3
Face/iESP  
ESP  
ESP/  
1
Digital Zoom  
Off  
Reset  
2
Image Size  
Compression  
Shadow Adjust  
AF Mode  
14M  
Normal  
Auto  
MENU  
OK  
Set  
Exit  
2
Press H to select the page tabs. Use FG  
to select the desired page tab and press I.  
1
2
3
Face/iESP  
ESP  
ESP/  
Digital Zoom  
MENU  
On  
Page tab  
Submenu 1  
OK  
Set  
Exit  
1
1
2
Reset  
Reset  
2
Image Size  
14M  
Normal  
Auto  
Image Size  
Compression  
Shadow Adjust  
AF Mode  
14M  
Normal  
Auto  
5
Press the m button to complete the  
setting.  
Compression  
Shadow Adjust  
AF Mode  
ESP/  
1
2
3
Face/iESP  
ESP  
1
2
3
Face/iESP  
ESP  
ESP/  
Digital Zoom  
MENU  
Off  
Digital Zoom  
Off  
OK  
MENU  
OK  
Set  
Exit  
Set  
Exit  
3
Use FG to select the desired submenu 1  
and then press the A button.  
Submenu 2  
1
2
1
Reset  
Reset  
Digital Zoom  
Image Size  
Compression  
Shadow Adjust  
AF Mode  
ESP/  
14M  
Normal  
Auto  
2
Image Size  
Compressio
Shadow Adju
AF Mode  
Off  
On  
1
2
3
1
2
3
Face/iESP  
ESP  
ESP/  
Digital Zoom  
MENU  
Off  
Digital Zoom  
OK  
MENU  
OK  
Set  
Exit  
Set  
Back  
6
EN  
Menu Index  
Menus for Shooting Functions  
Program Auto  
1
9
1
2
3D  
P
Reset  
Image Size  
Compressio
Shadow Adju
AF Mode  
1
2
Image Stabilizer  
ON  
2
3
4
5
6
7
8
AF Illuminat.  
1
2
Image Size  
720p  
Normal  
Off  
Rec View  
Image Quality  
1
2
3
Pic Orientati
Is Movie Mode  
ESP/  
0.0  
1
2
3
Icon Guide  
WB  
On  
Digital Zoom  
R
AUTO  
Date Stamp  
1
2
3
MENU  
Exit  
ISO  
AUTO  
MENU  
Exit  
0
14M  
4
MENU  
OK  
Exit  
Set  
a
Pic Orientation..................p.42  
Icon Guide........................p.42  
Date Stamp ......................p.42  
1 Shooting mode  
8 Drive.................................p.37  
9 p (Shooting menu 1)  
P (Program Auto).............p.19  
M (iAUTO)...................p.28  
s (Scene Mode) .........p.28  
P (Magic Filter) ..........p.29  
p (Panorama)..................p.30  
W (3D) ............................p.32  
2 Flash.................................p.34  
3 Macro ...............................p.34  
4 Self-timer..........................p.35  
5 Exposure compensation...p.35  
6 White balance...................p.36  
7 ISO ...................................p.36  
Reset................................p.38  
Image Size .......................p.39  
Compression ....................p.39  
Shadow Adjust..................p.40  
AF Mode...........................p.40  
ESP/n ...........................p.40  
Digital Zoom .....................p.41  
0 q (Shooting menu 2)  
a A (Movie menu)  
Image Size .......................p.39  
Image Quality ...................p.39  
IS Movie Mode .................p.41  
R (Movie sound recording)  
......................................p.43  
Image Stabilizer................p.41  
AF Illuminat. ....................p.41  
Rec View ..........................p.42  
7
EN  
Menus for Playback, Editing, and Printing Functions  
1 q(Playback)  
Slideshow..................... p.44  
Photo Surng................ p.44  
Edit ............................... p.45  
Erase............................ p.46  
Print Order.................... p.47  
R (Protect).................... p.47  
y (Rotate).................... p.47  
1
Slideshow  
2
Photo Surfing  
Edit  
1
Erase  
1
2
3
Print Order  
R
y
MENU  
OK  
Set  
Exit  
Menus for Other Camera Settings  
File Name..................... p.50  
Pixel Mapping............... p.51  
s (Monitor)................ p.51  
TV Out.......................... p.51  
Power Save.................. p.53  
l (Language) ........... p.53  
3 t (Settings 3)  
X(Date/time)............. p.54  
World Time ................... p.54  
Data Repair .................. p.54  
1 r (Settings 1)  
Memory Format/  
1
2
Memory Format  
Backup  
Format ........................ p.48  
Backup ......................... p.48  
Eye-Fi........................... p.48  
USB Connection........... p.49  
qPower On ............... p.49  
Eye-Fi  
Off  
Auto  
Yes  
USB Connection  
q
1
2
3
Power On  
1
2
3
z
Keep Settings  
Pw On Setup  
MENU  
Yes  
Off  
z
Keep Settings............ p.49  
Pw On Setup ................ p.49  
2 s (Settings 2)  
OK  
Set  
Exit  
Sound Settings............. p.50  
8
EN  
Names of PParts  
Camera unit  
1
2
3
4
5
n button.......p. 17, 19  
Shutter button........p. 20, 60  
Zoom lever.............p. 21, 24  
Connector cover ....p. 14, 16  
Multi-connector  
10  
11  
1
2
3
..................p. 14, 16, 52, 55  
HDMI micro connector  
4
6
....................................p. 52  
Strap eyelet .................p. 10  
Battery/card compartment  
lock .............................p. 13  
Battery/card compartment  
cover...........................p. 13  
5
6
7
8
12  
7
9
10 Indicator lamp........p. 14, 16  
11 Flash switch.................p. 34  
12 Lens.............................p. 65  
13 Tripod socket  
8
9
13  
15  
SZ-10  
SZ-20  
14 Flash............................p. 34  
15 Microphone............p. 43, 45  
16 AF illuminator...............p. 41  
Self-timer lamp ............p. 35  
15  
14  
16  
14  
15  
16  
9
EN  
1
2
3
Speaker  
Monitor.......p. 11, 19, 51, 60  
R button (record movies)  
....................................p. 20  
2
4 qbutton (switching  
between shooting and  
playback)  
3
4
5
........................p. 20, 22, 49  
1
5
6
A button (OK)...............p. 4  
Wheel controller.............p. 4  
INFO button (changing  
6
information display)  
7
8
..............................p. 22, 25  
D button (erase).........p. 24  
E button (camera guide/  
menu guide)................p. 26  
m button..............p. 3, 6  
7
8
Attacching the camera sstrap  
Pull the strap tight so that it does not come loose.  
10  
EN  
Monitor  
Shooting mode display  
1
2
3
Battery check..........p. 16, 61 15 Shadow Adjustment  
1
2
Shooting mode .......p. 19, 28  
Technology..................p. 40  
P
Flash.............................p. 34 16 Compression (still images)  
25  
24  
3
4
5
6
7
8
9
Flash standby/ash charge  
....................................p. 60 17 Image size (still images)  
Macro/super macro ......p. 34 ..............................p. 39, 68  
Self-timer......................p. 35 18 Number of storable still  
..............................p. 39, 68  
23  
22  
21  
0.0  
4
5
6
WB  
AUTO  
ISO  
AUTO  
Exposure compensation  
pictures (still images)  
00:34  
20  
14M  
DATE  
19  
4
NORM  
....................................p. 35  
....................................p. 19  
7
8
9
White balance...............p. 36 19 Current memory ...........p. 67  
ISO ...............................p. 36 20 Movie recording icon ....p. 20  
Drive.............................p. 37 21 Remaining recording time  
(movies)......................p. 20  
(movies)......................p. 43 22 Image size (movies)  
18 1716 15 14 13 12 11 10  
1/100 F3.0  
10 Recording with sound  
27 26  
11 Date stamp...................p. 42  
..............................p. 39, 69  
12 World time ....................p. 54 23 Histogram.....................p. 22  
13 Image stabilization (still  
images)/Digital image  
stabilization (movies)  
24 AF target mark..............p. 20  
25 Camera shake warning  
26 Aperture value..............p. 20  
....................................p. 41 27 Shutter speed...............p. 20  
14 Metering .......................p. 40  
11  
EN  
Playback mmode display  
1
2
3
4
Battery check..........p. 16, 61  
Grouped image.............p. 23  
3D image......................p. 26  
Print reservation/number of  
prints..................p. 58/p. 57  
Eye-Fi transferred.........p. 48  
Protect..........................p. 47  
Adding sound .........p. 43, 45  
Current memory ...........p. 67  
Frame number/total number  
of images (still images)  
Standard display  
1 2  
3
4
5 6  
7
8 9  
1
3D  
10  
4/30  
5
6
7
8
9
10  
9
00:12/00:34  
’11/02/26 00:00  
20  
11  
Still image  
Movie  
....................................p. 22  
Elapsed time/total  
recording time (movies)  
Advanced display  
....................................p. 23  
1 2  
3
4
5 6  
7
8 9  
12  
13 14 15  
10 Volume ...................p. 23, 50  
11 Histogram.....................p. 22  
12 Shutter speed...............p. 20  
13 Aperture value..............p. 20  
14 ISO ...............................p. 36  
15 Exposure compensation  
....................................p. 35  
16 White balance...............p. 36  
17 Compression (still images)  
..............................p. 39, 68  
Image quality (movies)  
3D  
10  
4/30  
1/1000 F3.0  
2.0  
ISO WB  
100 AUTO  
22  
21  
16  
17  
18  
P
1/1000 F3.0  
2.0  
ISO WB  
100 AUTO  
14M  
NORM  
P
FILE  
14M  
19  
20  
NORM  
100 0004  
FILE  
100 0004  
’11/02/26 00:00  
’11/02/26 00:00  
..............................p. 39, 69  
18 Image size........p. 39, 68, 69  
19 File number  
20 Date and time.........p. 17, 54  
21 Shadow Adjustment  
Technology..................p. 40  
22 Shooting mode .......p. 19, 28  
12  
EN  
Preparing tthe Caamera  
Inserting the battery  
Turn off the camera before opening the battery/card  
compartment cover.  
When using the camera, be sure to close the battery/  
card compartment cover.  
1
Battery/card  
compartment cover  
2
3
1
1
2
Battery/card compartment lock  
2
Charging the battery and setting up  
using the supplied CD  
Connect the camera to the computer to charge the battery  
and use the supplied CD for setup.  
User registration using the supplied CD and  
installation of [ib] computer software is available on  
Windows computers only.  
The camera battery can be charged while the camera is  
connected to a computer.  
Battery lock knob  
The indicator lamp lights during charging and turns  
off when charging is complete.  
Insert the battery as illustrated with the Cmark  
toward the battery lock knob.  
Damage to the battery exterior (scratches, etc.) may  
produce heat or an explosion.  
Charging takes up to 3.5 hours.  
If the indicator lamp does not light, the camera is not  
correctly connected or the battery, camera, computer,  
or USB cable may not be functioning as expected.  
Insert the battery while sliding the battery lock knob in  
the direction of the arrow.  
We recommend that you use a computer equipped  
with Windows XP (Service Pack 2 or later), Windows  
Vista, or Windows 7. See “Charging the battery with  
the included USB-AC adapter” (p. 16) if you are using  
a different computer or wish to charge the battery  
without using a computer.  
Slide the battery lock knob in the direction of the  
arrow to unlock, and then remove the battery.  
13  
EN  
Windows  
Connectiing the camera  
Insert the supplied CD in a CD-ROM drive.  
1
Windows XP  
A “Setup” dialog will be displayed.  
Indicator lamp  
Windows Vista/Windows 7  
An Autorun dialog will be displayed. Click “OLYMPUS  
Setup” to display the “Setup” dialog.  
Multi-connector  
USB cable  
(supplied)  
Connector  
cover  
Computer (on  
and running)  
If the “Setup” dialog is not displayed, select “My  
Computer” (Windows XP) or “Computer” (Windows  
Vista/Windows 7) from the start menu. Double-click  
the CD-ROM (OLYMPUS Setup) icon to open the  
“OLYMPUS Setup” window and then double-click  
“Launcher.exe”.  
If a “User Account Control” dialog is displayed, click  
Yes” or “Continue”.  
Register your Olympus product.  
Click the “Registration” button and follow the on-  
screen instructions.  
3
Follow the on-screen instructions on your  
2
computer.  
Install OLYMPUS Viewer 2 and [ib] computer  
software.  
Check the system requirements before beginning  
4
If nothing is displayed on the camera screen even  
after connecting the camera to the computer, the  
battery may be exhausted. Leave the camera  
connected to the computer until the battery has  
charged, then disconnect and reconnect the camera.  
installation.  
Click the “OLYMPUS Viewer 2” or “OLYMPUS ib”  
button and follow the on-screen instructions to  
install the software.  
14  
EN  
Macintosh  
OLYMPUS Viewer 2  
Insert the supplied CD in a CD-ROM drive.  
Double-click the CD (OLYMPUS Setup) icon on  
the desktop.  
Operating  
System  
Windows XP (Service Pack 2 or later)/  
Windows Vista/Windows 7  
1
Processor  
Pentium 4 1.3 GHz or better  
Double-click the “Setup” icon to display the “Setup” dialog.  
1 GB or more (2 GB or more  
recommended)  
RAM  
Free Hard  
Drive Space  
1 GB or more  
1024 x 768 pixels or more  
Minimum 65,536 colors (16,770,000  
colors recommended)  
Monitor  
Settings  
[ib]  
Operating  
System  
Windows XP (Service Pack 2 or later)/  
Windows Vista/Windows 7  
Install OLYMPUS Viewer 2.  
Check the system requirements before beginning  
installation.  
2
Pentium 4 1.3 GHz or better  
(Pentium D 3.0 GHz or better required  
for movies)  
Processor  
Click the “OLYMPUS Viewer 2” button and follow  
the on-screen instructions to install the software.  
512 MB or more (1 GB or more  
recommended)  
RAM  
(1 GB or more required for movies—2 GB  
or more recommended)  
OLYMPUS Viewer 2  
Operating  
System  
Mac OS X v10.4.11–v10.6  
Free Hard  
Drive Space  
1 GB or more  
Processor  
Intel Core Solo/Duo 1.5 GHz or better  
1024 x 768 pixels or more  
Minimum 65,536 colors (16,770,000  
colors recommended)  
Monitor  
Settings  
1 GB or more (2 GB or more  
recommended)  
RAM  
Free Hard  
Drive Space  
A minimum of 64 MB video RAM with  
DirectX 9 or later.  
1 GB or more  
Graphics  
1024 x 768 pixels or more  
Minimum 32,000 colors (16,770,000  
colors recommended)  
Monitor  
Settings  
*
See online help for information on using the software.  
Install the camera manual.  
Click the “Camera Instruction Manual” button and  
follow the on-screen instructions.  
5
*
Other languages can be selected from the language combo  
box. For information on using the software, see online help.  
15  
EN  
Copy the camera manual.  
3
2
Click the “Camera Instruction Manual” button to  
open the folder containing the camera manuals.  
Copy the manual for your language to the computer  
Indicator lamp  
On: Charging  
Off: Charged  
.
Charging the battery with the  
included USB-AC adapter  
The battery is not fully charged at shipment. Before  
use, be sure to charge the battery until the indicator  
lamp turns off (up to 3.5 hours).  
The included F-2AC USB-AC adapter (hereafter  
referred to as USB-AC adapter) differs depending  
on the region where you purchased the camera. If  
you received a plug-in type USB-AC adapter, plug it  
directly into AC outlet.  
If the indicator lamp does not light, the USB-AC  
adapter is not connected to the camera correctly,  
or the battery, camera, or USB-AC adapter may be  
broken.  
The included USB-AC adapter has been designed  
to be used for charging and playback. Do not take  
pictures while the AC adapter is connected to the  
camera.  
For details on the battery and the USB-AC adapter,  
see “Battery and USB-AC adapter” (p. 65).  
The battery can be charged while the camera is  
connected to the computer. Charging time varies  
depending on the performance of a computer. (There  
may be cases in which it takes approx. 10 hours.)  
1
When to charge the batteries  
Charge the battery when the error message shown below  
appears.  
Multi-connector  
Flashes in red  
2
USB cable  
Connector cover  
(supplied)  
Battery Empty  
14M  
4
Monitor top left  
Error message  
1
AC outlet  
3
16  
EN  
Date, time, time zone, and language  
As in Steps 2 and 3, use FGHI to set  
[M] (month), [D] (day), [Time] (hours and  
minutes), and [Y/M/D] (date order), and then  
press the A button.  
4
5
The date and time set here are saved to image le names,  
date prints, and other data. You can also choose the  
language for the menus and messages displa yed in the  
monitor.  
For precise time setting, press the A button as the  
time signal strikes 00 seconds.  
Press the n button to turn on the  
camera.  
The date and time setting screen is displayed when  
1
To change the date and time, adjust the setting from  
the menu. [X] (Date/time) (p. 54)  
the date and time are not set.  
Use HI to select the [x] time zone and  
then press the A button.  
Use FG to turn daylight saving time ([Summer])  
on or off.  
X
Y
M
--  
D
Time  
’11.02.26 00:00  
Y/M/D  
----  
.
.
-- -- --  
:
Seoul  
Tokyo  
MENU  
Cancel  
Date and time setting screen  
OK  
Set  
Summer  
Use FG to select the year for [Y].  
2
3
X
The menus can be used to change the selected time  
zone. [World Time] (p. 54)  
Y
M
D
Time  
Use FGHI to select your language and  
6
Y/M/D  
2011. --  
.
-- -- --  
:
press the A button.  
The menus can be used to change the selected  
language. [l] (p. 53)  
MENU  
Cancel  
Inserting the card  
Press I to save the setting for [Y].  
X
Always use SD/SDHC/SDXC cards or Eye-Fi card  
with this camera. Do not insert other types of memory  
cards. “Using the card” (p. 66)  
Y
M
D
Time  
This camera can be used without a card by storing  
images in its internal memory.  
Y/M/D  
2011.01. -- -- --  
:
MENU  
Cancel  
17  
EN  
1
2
Write-protect  
switch  
Insert the card straight until it clicks into place.  
Do not touch the contact area directly.  
1
2
“Number of storable pictures (still images)/Continuous  
recording length (movies) in the internal memory and  
cards” (p. 68, 69)  
To remove the card  
1
2
Press the card in until it clicks and comes out slightly,  
then remove the card.  
18  
EN  
Shooting, Playbacck, and EErasing  
Shooting with the optimum aperture  
value and shutter speed (P mode)  
Hold the camera and compose the shot.  
2
In this mode, automatic shooting settings are activated  
while also allowing changes to a wide range of  
other shooting menu functions, such as exposure  
compensation, white balance, etc. as needed.  
Monitor  
Press the n button to turn on the  
camera.  
1
Horizontal grip  
P
mode indicator.  
P
0.0  
WB  
AUTO  
ISO  
Vertical grip  
AUTO  
00:34  
14M  
4
Number of storable still pictures (p. 68)  
Monitor (standby mode screen)  
If P mode is not displayed, press H to display the  
function menu screen and then set the shooting  
mode to P. “Using the Menu” (p. 5)  
Current shooting mode display  
Program Auto  
3D  
P
0.0  
WB  
AUTO  
ISO  
AUTO  
14M  
MENU  
4
19  
EN  
To turn off the camera  
Press the n button again.  
Press the shutter button halfway down to  
focus on the subject.  
3
When the camera focuses on the subject, the  
exposure is locked (shutter speed and aperture  
value are displayed), and the AF target mark  
changes to green.  
Shooting movies  
Press the R button to start recording.  
1
The camera was unable to focus if the AF target  
mark ashes red. Try focusing again.  
Continuous recording length  
(p. 69)  
AF target mark  
P
Press halfway  
00:34  
REC  
00:12  
1/400 F3.5  
Recording time  
Shutter speed Aperture value  
Lights up red when recording  
“Focusing” (p. 62)  
The effects of the set shooting mode can be used  
when shooting movies. When the set shooting mode  
To take the picture, gently press the shutter  
button all the way down while being careful  
not to shake the camera.  
4
is p,  
, s (Beauty) or P (Sparkle), shooting  
W
is performed in P mode.  
P
Press the R button again to stop recording.  
2
Sound will also be recorded.  
During sound recording, only the digital zoom can be  
used (SZ-10). To record a movie with optical zoom,  
set [R] (movies) (p. 43) to [Off].  
Press fully  
1/400 F3.5  
Image review screen  
To view images during shooting  
Pressing the qbutton enables playback of images. To  
return to shooting, either press the qbutton or press the  
shutter button halfway down.  
20  
EN  
[On] selected for [Digital Zoom]:  
Using the zoom  
Image size  
Zoom bar  
Turning the zoom lever adjusts the shooting range.  
W side  
T side  
14M (SZ-10)  
16M (SZ-20)  
Digital zoom range  
The magnication  
ratio changes  
Zoom bar  
Other  
depending on the  
image size setting.*1  
P
P
Digital zoom range  
*1  
0.0  
0.0  
If [Image Size] is less than the full resolution, after  
reaching the maximum optical zoom, the camera will  
automatically resize and crop the image to the selected  
[Image Size], then enter the digital zoom range if [Digital  
Zoom] is [On].  
WB  
WB  
AUTO  
AUTO  
ISO  
ISO  
AUTO  
AUTO  
00:34  
14M  
4
00:34  
14M  
4
Optical zoom:18x (SZ-10)  
12.5x (SZ-20)  
Photographs taken with the zoom bar displayed in  
red may appear “grainy.”  
Digital zoom: 4x  
To take larger imagess [Digital Zoom]  
Changing the shooting information  
display  
The type and amount of zoom can be identied from  
the appearance of the zoom bar. The display differs  
depending on the options selected for [Digital Zoom]  
(p. 41) and [Image Size] (p. 39).  
The display of the screen information can be changed to  
best match the situation, for example, the need for a clear  
view of the screen or for making a precise composition by  
using the grid display.  
[Off] selected for [Digital Zoom]:  
Image size  
Zoom bar  
14M (SZ-10)  
16M (SZ-20)  
Optical zoom range  
Other  
The magnication ratio changes  
depending on the image size setting.*1  
21  
EN  
Viewing images  
Press F (INFO).  
1
The displayed shooting information changes in  
the order shown below each time the button is  
pressed. “Shooting mode display” (p. 11)  
Press the q button.  
1
Number of frames/  
Total number of images  
Normal  
No information  
P
P
4/30  
0.0  
WB  
AUTO  
ISO  
AUTO  
00:34  
14M  
4
MENU  
’11/02/26 00:00  
Movie information (SZ-20 only)  
Detailed  
Playback image  
P
P
Turn the wheel controller to select an image.  
It can be performed by pressing HI.  
2
0.0  
WB  
0.0  
AUTO  
WB  
ISO  
AUTO  
AUTO  
ISO  
AUTO  
00:34  
14M  
00:34  
14M  
4
MENU  
4
NORM  
Displays  
Displays next  
previous  
image  
image  
Readinng a histogram  
If the peak lls too much of the frame, the  
image will appear mostly white.  
Keep turning the wheel controller to fast forward or  
reverse. It can be performed by holding HI.  
If the peak lls too much  
of the frame, the image  
will appear mostly black.  
The display size of the images can be changed.  
“Index view and close-up view” (p. 24)  
The green section shows  
luminance distribution within  
the screen’s center.  
22  
EN  
To play sound recordings  
To play back movies  
To play sound recorded with an image, select the image  
and press the A button.  
Select a movie, and press the A button.  
4/30  
! appears  
OK  
Movie Play  
’11/02/26 00:00  
During playback  
Movie  
During audio playback  
Press the A button to pause  
playback. During pause, fast  
forward or reverse, press the A  
button to restart playback.  
Pausing and  
restarting  
playback  
Press FG to adjust volume.  
To view sequential images (SZ-20 only)  
Pictures taken using sequential mode (p. 37) are  
displayed as a group.  
Press I to fast forward. Press I again  
to increase the fast forward speed.  
Fast forward  
Rewind  
Turn the zoom lever to the T side. Use FGHI  
to select the image in index view, and then press  
the A button to display the image. Press HI to  
view the previous/next frame.  
Press H to rewind. The speed  
at which the recording rewinds  
increases each time H is pressed.  
Adjusting the  
volume  
Turn the wheel controller or use  
FG to adjust the volume.  
Operations while playback is paused  
Expand  
OK  
T
Play  
Sequentially shot frame  
Select the sequentially shot frame and press  
the A button to playback the series of images  
continuously. Press the A button to stop the  
continuous playback, and then use HI to view  
the images frame by frame.  
Elapsed time  
/Total recording time  
00:14/00:34  
During pause  
23  
EN  
Index view and close-up view  
Use F to display the rst frame  
and press G to display the last  
frame.  
Cueing  
Index view enables quick selection of a desired image.  
Close-up view (up to 10x magnication) allows checking  
of image details.  
Turn the wheel controller to advance  
or rewind by one frame at a time.  
Keep turning the wheel controller for  
continuous advance or rewind.  
Advancing and  
rewinding one  
frame at a time*1  
Turn the zoom lever.  
1
Resuming  
playback  
Press the A button to resume playback.  
To operate with HI  
Single-image view  
Close-up view  
*1  
Press I or H to advance or rewind one frame  
at a time. Hold I or H pressed for continuous  
advance or rewind.  
4/30  
4/30  
W
T
To stop movie playback  
Press the m button.  
’11/02/26 00:00  
’11/02/26 00:00  
Erasing images during playback  
(Single image erase)  
W
T
Index view  
Display the image you want to erase and  
1
press G ( ).  
D
’11/02/26  
Erase  
2
4
Photo Surng  
(p. 44)  
Erase  
Cancel  
W
T
ALL  
MENU  
OK  
Set  
Cancel  
’11/02/26  
W
2011/  
02/26  
2
4
Press FG to select [Erase], and press the  
A button.  
2
35ºN  
139ºE  
Multiple images or all images can be erased at a time  
(p. 46).  
24  
EN  
To select an image in index view  
Use FGHI to select an image, and press the A  
button to display the selected image in single-image view.  
Playing back panorama images  
Panorama images that were combined together using  
[Auto] or [Manual] can be scrolled for viewing.  
To scroll an image in close-up view  
Use FGHI to move the viewing area.  
“Creating panoramic images (p mode)” (p. 30)  
Select a panorama image during playback.  
1
To stop [Photo Surng]  
“Viewing images” (p. 22)  
Use FG to select [ALL], then press the A button.  
4/30  
Changing the image information  
display  
Shooting information settings displayed on the screen can  
be changed.  
Press F (INFO).  
1
OK  
Replay  
’11/02/26 00:00  
The displayed image information changes in  
the order shown below each time the button is  
pressed.  
Press the A button.  
2
Normal  
3D  
10  
4/30  
No information  
’11/02/26 00:00  
Detailed  
Current viewing area  
10  
4/30  
To control panorama image playback  
Zoom in/Zoom out: Press the A button to pause  
playback. Then turn the zoom lever to enlarge/shrink the  
image.  
1/1000 F3.0  
2.0  
ISO WB  
P
AUTO AUTO  
14M  
NORM  
FILE  
100 0004  
’11/02/26 00:00  
“Reading a histogram” (p. 22)  
25  
EN  
Playback direction: Press FGHI to pause playback  
and scroll the image in the direction of the pressed button.  
To start a slideshow, press the m button.  
To stop the slideshow, press the m or A button.  
Pause: Press the A button.  
Restart scrolling: Press the A button.  
Stop playback: Press the m button.  
3D images are composed of JPEG les and MPO  
les. If any les are deleted on a computer, playback  
of 3D images may not be possible.  
Playing back W images  
Using the menu guide  
3D images shot with this camera can be played back on  
3D-compatible devices connected to this camera using an  
HDMI cable (sold separately).  
Pressing the E button in the setup menu displays a  
description of the current item.  
“Using the Menu” (p. 5)  
“Shooting 3D images (3D mode)” (p. 32)  
When playing back 3D images, read the warnings in  
the instruction manual for the 3D-compatible devices  
carefully.  
Using the camera guide  
Use the camera guide to look up camera operations.  
Connect the 3D-compatible device and  
camera using the HDMI cable.  
1
Press the E button in the standby mode  
screen or the playback screen.  
1
For the connection and setting method, see  
“Connection via HDMI cable” (p. 52)  
Search by  
purpose  
Search for a  
solution  
Use the wheel controller or HI to select [3D  
show] and then press the A button.  
2
Search by  
situation  
Learn about the  
camera  
Use the wheel controller or HI to select the  
3D image to play back and then press the A  
button.  
3
Search by  
keyword  
History  
OK  
Set  
Exit  
MENU  
OK  
Set  
Slideshow  
26  
EN  
Submenu 2  
Search by  
purpose  
Application  
Functions or operating methods can  
be searched.  
Search for a  
solution  
A solution can be searched when  
having problems during operation.  
Search by  
situation  
Search from shooting/playback  
scene.  
Search from  
keyword  
Search from the camera keyword.  
Information is shown about  
recommended functions and basic  
operating methods for the camera.  
Learn about the  
camera  
Searches can be performed from the  
search history.  
History  
Use FGHI to select the desired item.  
Follow the on-screen instructions to search the  
desired contents.  
2
27  
EN  
Using Shootiing Modes  
To change the shooting mode  
Using the best mode for the shooting  
s
P
,
M
p
, W)  
P
s
The shooting mode (  
,
,
,
scene (  
mode)  
can be changed with using the function menu.  
“Using the Menu” (p. 5)  
s
Set the shooting mode to  
.
1
The default settings of the function are highlighted in  
.
Scene Mode  
Shooting with automatic settings  
(M mode)  
0.0  
The camera will automatically select the optimal shooting  
mode for the scene. The shooting condition is decided by  
the camera and settings cannot be changed, excepting  
some functions.  
WB  
AUTO  
14M  
MENU  
4
Set the shooting mode to M.  
Press G to go to the submenu.  
1
2
3
The icon changes depending on the scene  
that the camera automatically selects  
Portrait  
0.0  
WB  
AUTO  
14M  
MENU  
4
Use HI to select the mode and then press  
the A button to set.  
00:34  
14M  
4
NORM  
In some cases, the camera may not select the  
desired shooting mode.  
When the camera cannot identify the optimal mode,  
P mode will be selected.  
0.0  
WB  
AUTO  
00:34  
14M  
4
Icon indicating the scene mode  
that is set  
28  
EN  
s
In  
modes, the optimum shooting settings are  
Shooting with special effects  
pre-programmed for specic shooting scenes. For  
this reason, settings may not be changed in some  
modes.  
P
(
mode)  
To add expression to your photo, select the desired  
special effect.  
Option  
Application  
P
Set the shooting mode to  
.
BPortrait/VBeauty/FLandscape/  
1
*1  
'
Hand-Held Starlight  
/
GNight Scene*3  
/
Night+Portrait/  
M
The camera takes  
a picture using the  
optimum settings  
for the scene  
Magic Filter  
CSport/NIndoor/WCandle*2  
/
*3  
R
S
Self Portrait/ Sunset  
/
XFireworks*3  
/
Cuisine/  
V
conditions.  
dDocuments/qBeach & Snow/  
UPet Mode - Cat/  
tPet Mode - Dog  
0.0  
WB  
AUTO  
14M  
MENU  
*1  
4
SZ-20 only  
SZ-10 only  
*2  
*3  
When the subject is dark, noise reduction is  
automatically activated. This approximately doubles the  
shooting time during which no other pictures can be  
taken.  
Press G to go to the submenu.  
2
3
Pop Art  
Using V (Beauty)  
1 Point the camera toward the subject. Check the frame  
appearing around the face detected by the camera,  
and then press the shutter button to take the picture.  
0.0  
WB  
AUTO  
The unedited image and edited image are both  
saved.  
MENU  
If the image cannot be retouched, only the unedited  
image is saved.  
Use HI to select the desired effect and then  
press the A button to set.  
The [Image Size] of the retouched image is limited  
to [n] or lower.  
0.0  
WB  
AUTO  
00:34  
14M  
4
P
Icon indicating  
that is set  
mode  
29  
EN  
Shooting mode  
Option  
Submenu 1  
Application  
Three frames are taken and  
combined by the camera.  
The user only composes the  
shots so that the target marks  
and pointers overlap, and the  
camera automatically releases  
the shutter.  
1Pop Art  
2Pin Hole  
3Fish Eye  
4Drawing*1  
5Soft Focus  
6Punk  
XSparkle  
YWatercolor  
SZ-10  
SZ-20  
MAGIC FILTER  
Auto  
Panorama images are  
automatically combined just  
by swinging the camera in the  
shooting direction. Press the  
shutter button once to begin  
the sequence.  
*1  
Two images are saved, an unmodied image and an  
image to which the effect has been applied.  
P
In  
mode, the optimum shooting settings are pre-  
programmed for each scene effect. For this reason,  
some settings cannot be changed in some modes.  
Three frames are taken and combined  
by the camera. The user composes  
the shots using the guide frame and  
manually releases the shutter.  
The selected effect is applied to the movie. The effect  
may not be applied depending on the shooting mode.  
Manual  
PC  
The frames that were taken are  
combined into a panorama image using  
the PC software.  
Creating panoramic images (p mode)  
Set the shooting mode to p.  
1
For details on installing the PC software, see  
“Charging the battery and setting up using the  
supplied CD” (p. 13).  
Panorama  
3D  
AUTO  
When set to [Auto] or [Manual], [Image Size]  
(p. 39) is xed to 2MB or equivalent.  
0.0  
WB  
The focus, exposure, zoom position (p. 21), and white  
AUTO  
balance (p. 36) are locked at the rst frame.  
The ash (p. 34) is xed to $(Flash Off) mode.  
14M  
MENU  
4
To shoot with [Auto] (SZ-20)  
1 Point the camera to the start position.  
Press G to go to the submenu.  
2
3
Use FGHI to select the shooting direction.  
Use HI to select the desired mode. When  
selecting [Auto], press G. When selecting  
other than [Auto], press the A button.  
2 Press the shutter button to begin shooting. Move  
the camera slowly in the arrow-marked direction that  
shown on the monitor.  
When shooting with [Auto] (SZ-20)  
Use HI to select the angle of view and then  
press the A button.  
4
30  
EN  
3 Move the camera slowly while keeping it straight, and  
stop the camera where the pointer and target mark  
overlap.  
AUTO  
FULL  
The camera releases the shutter automatically.  
AUTO  
OK  
Save  
Cancel MENU  
Guide  
3 When shooting reaches the end of the guide on the  
monitor, it nishes automatically.  
MENU  
OK  
Save  
Cancel  
The camera automatically processes the images  
and the combined panorama image is displayed.  
To combine only two pictures, press the A button  
before taking a third frame.  
To stop shooting in the middle, press the shutter  
button or A button. If the camera pauses for a  
while, shooting automatically nishes.  
4 Repeat Step 3to take a third frame.  
After the third frame is taken, the camera  
automatically processes the frames and the  
combined panorama image is displayed.  
If the message “Image was not created.” is displayed,  
shoot again.  
To exit the panorama function without saving an  
image, press the m button.  
If the shutter does not automatically release, try  
[Manual] or [PC].  
When shooting with [Auto] (SZ-10)  
1 Press the shutter button to take the rst frame.  
4
2 Move the camera slightly in the direction of the second  
frame.  
Taking pictures with [Manual]  
1 Use FGHI to specify at which edge the next  
picture is to be connected.  
AUTO  
Target mark  
MANUAL  
Direction for  
combining the next  
frame  
Pointer  
MENU  
OK  
Save  
Cancel  
Screen when combining images  
from left to right  
OK  
Set  
2 Press the shutter button to take the rst frame. The  
white-boxed part of the rst frame is displayed on joint  
area 1.  
31  
EN  
Shooting 3D images (W mode)  
MANUAL  
MANUAL  
In this mode, 3D images are shot for viewing on  
3D-compatible display devices.  
1
2
Images shot in 3D mode cannot be displayed in 3D  
on this camera’s monitor.  
MENU  
OK  
Save  
Cancel  
1st frame  
Set the shooting mode to W.  
1
3 Compose the next shot so that joint area 1 overlaps  
joint area 2.  
3D Photo  
3D  
P
4 Press the shutter button to take the next shot.  
AUTO  
Press the A button to combine just 2 frames.  
5 Repeat steps 3and 4to take a third frame.  
After the third frame is taken, the camera  
automatically processes the frames and the  
combined panorama image is displayed.  
14M  
MENU  
4
To exit the panorama function without saving an  
image, press the m button.  
Press G to go to the submenu.  
2
3
Taking pictures with [PC]  
1 Use FGHI to select the direction that the frames  
are combined.  
Use HI to select [Auto] or [Manual] and  
then press the A button to set.  
2 Press the shutter button to take the rst frame, and  
then point the camera for the second frame. The  
shooting procedure is same as that of [Manual].  
Submenu 1  
Description  
The camera automatically shoots the  
second frame to create a 3D image.  
Auto  
Panorama shooting is possible for up to 10 frames.  
3 Repeat Step 2until the number of desired frames is  
taken, and then press the A button or m button  
when nished.  
You shoot the second frame to create  
a 3D image by following the guide on  
the monitor.  
Manual  
Refer to the PC software help guide for details on  
how to make panorama images.  
Depending on the subject or the situation (if the  
distance between the camera and subject is too  
short), the image may not look 3D.  
The 3D viewing angle varies depending on the  
subject, etc.  
32  
EN  
Taking pictures with [Auto]  
1 Press the shutter button to shoot the rst frame.  
2 Move the camera horizontally. The image is  
automatically taken when the subject overlaps the  
translucent image that is displayed on the monitor.  
Taking pictures with [Manual]  
1 Press the shutter button to shoot the rst frame.  
2 Move the camera in the same way as [Auto] to decide  
the position, and then press the shutter button.  
The rst shot image is displayed on the monitor  
lightly. Decide the position by referencing the image.  
To exit 3D shooting mode without saving an image,  
press the m button.  
The [Image Size] (p. 39) is xed to [0].  
The zoom ratio is xed.  
The focus, exposure and the white balance are xed  
when the rst image is taken.  
The ash is xed to [$Flash Off].  
33  
EN  
Using Shoootingg Functtions  
“Using the Menu” (p. 5)  
Use HI to select the setting option, and  
press the A button to set.  
3
Using the ash  
Option  
Description  
The ash functions can be selected to best match the  
shooting conditions.  
The ash res automatically in low-  
light or backlight conditions.  
Flash Auto  
Redeye  
Slide the ash switch to raise the ash.  
1
Pre-ashes are emitted to reduce  
the occurrence of red eye in your  
photos.  
The ash res regardless of the  
available light.  
Fill In  
Flash Off  
The ash does not re.  
Shooting closeups (Macro shooting)  
This function enables the camera to focus and shoot  
subjects at close distances.  
To turn off the ash  
Select the macro option in the function menu.  
1
Press the ash down back into the camera.  
Select the ash option in the function menu.  
2
P
Off  
P
Flash Auto  
0.0  
WB  
AUTO  
ISO  
AUTO  
0.0  
WB  
AUTO  
14M  
MENU  
4
ISO  
AUTO  
14M  
MENU  
4
34  
EN  
Option  
YOff  
Description  
Use HI to select the setting option, and  
press the A button to set.  
2
The self-timer is deactivated.  
The self-timer lamp turns on for  
approx. 10 seconds, then blinks for  
approx. 2 seconds, and then the  
picture is taken.  
Option  
Description  
Y12 sec  
Off  
Macro mode is deactivated.  
You can shoot the image at a closer  
range.  
The self-timer lamp blinks for approx.  
2 seconds, then the picture is taken.  
Macro  
Y2 sec  
SZ-10: 10 cm (4 in.)*1 160 cm (63 in.)*2  
SZ-20: 10 cm (4 in.)*1 90 cm (35.4 in.)*2  
When your pet (cat or dog) turns its  
head towards the camera, its face is  
recognized and the picture is taken  
automatically.  
This enables shooting as close as  
1 cm/0.4 in. to the subject.  
Super Macro*3  
;
Auto Release*1  
*1  
When the zoom is at the widest (W) position.  
When the zoom is at the most telephoto (T) position.  
The zoom is automatically xed.  
*2  
*3  
*1  
[Auto Release] is displayed only when the s  
mode is [U] or [t].  
The ash (p. 34) and zoom (p. 21) cannot be set  
when [a Super Macro] (p. 35) is selected.  
Self-timer shooting is automatically canceled after  
one shot.  
To cancel the self-timer after it starts  
Press the m button.  
Using the self-timer  
After the shutter button is pressed all the way down, the  
picture is taken after a short delay.  
Adjusting the brightness  
(Exposure compensation)  
Select the self-timer option in the function  
menu.  
1
The standard brightness (appropriate exposure) set by the  
camera based on the shooting mode (except for M)  
can be adjusted brighter or darker to obtain a desired shot.  
P
Select the exposure compensation option in  
the function menu.  
1
Y Off  
2
12  
0.0  
WB  
AUTO  
ISO  
AUTO  
Exposure Comp.  
P
0.0  
14M  
MENU  
4
0.3 0.0 0.3  
WB  
AUTO  
ISO  
Use HI to select the setting option, and  
press the A button to set.  
2
AUTO  
MENU  
35  
EN  
Selecting the ISO sensitivity  
Use HI to select the desired brightness,  
and press the A button.  
2
Select the ISO setting option in the function  
1
menu.  
Adjusting to a natural color scheme  
(White balance)  
P
For more natural coloring, choose a white balance option  
suited to the scene.  
0.0  
Select the white balance option in the  
function menu.  
1
WB  
AUTO  
ISO  
1100  
ISO  
200  
ISO  
ISO 200  
400  
MENU  
1/400 F3.0  
WB  
WB Auto  
P
Use HI to select the setting option, and  
press the A button to set.  
2
0.0  
WB  
AUTO  
ISO  
AUTO  
Option  
Description  
MENU  
The camera automatically adjusts  
the sensitivity according to the  
shooting scene.  
ISO Auto  
Use HI to select the setting option, and  
press the A button to set.  
2
The camera uses a higher sensitivity  
compared to [ISO Auto] to minimize  
blur caused by a moving subject or  
by camera shake.  
High ISO Auto  
Value  
Option  
Description  
The camera automatically adjusts  
the white balance according to the  
shooting scene.  
The ISO sensitivity is xed to the  
selected value.  
WB Auto  
For shooting outdoors under a  
clear sky.  
ISO stands for International Organization for  
Standardization. ISO standards specify the sensitivity  
for digital cameras and lm, thus codes such as “ISO  
100” are used to represent sensitivity.  
5
For shooting outdoors under a  
cloudy sky.  
3
1
In the ISO setting, although smaller values result in  
less sensitivity, sharp images can be taken under fully  
lit conditions. Larger values result in higher sensitivity,  
and images can be taken at fast shutter speeds even  
under low light conditions. However, high sensitivity  
introduces noise into the resulting picture, which may  
give it a grainy appearance.  
For shooting under tungsten lighting.  
For shooting under white uorescent  
lighting.  
>
36  
EN  
SZ-20  
Sequential shooting (Drive)  
Option  
Description  
Pictures are taken sequentially while the shutter button  
is held down.  
One frame is shot each time the  
shutter button is pressed.  
o
Select the drive option in the function menu.  
1
The camera takes sequential shots at  
approximately 1.6 frames/sec.  
)
P
The camera takes sequential shots  
at approximately 7 frames/sec for up  
to 3 frames.  
*
,
+
The camera takes sequential shots at  
approximately 15 frames/sec for up  
to 34 frames.  
0.0  
WB  
AUTO  
ISO  
AUTO  
Sequential  
The camera takes up to 16 photos  
at regular intervals while holding the  
shutter button.  
MENU  
*1  
The shooting speed varies depending on the settings  
for [Image Size/Compression] (p. 39).  
SZ-10  
With settings other than [o], the focus, exposure  
and the white balance are xed when the rst frame  
is shot.  
Option  
Description  
One frame is shot each time the  
shutter button is pressed.  
o
The [Image Size] is limited.  
[,] [c] [+]: [n] or lower  
[d]: [3] or lower  
The images are taken sequentially  
while holding down the shutter  
button.  
j*1  
The ISO sensitivity is xed to [ISO Auto].  
The camera takes sequential shots  
at a faster speed than in [j].  
When set to [j], the ash (p.34) cannot be set to  
[Redeye]. When set to other than [o] or [j], the  
ash is xed to [$Flash Off].  
c
d
The camera takes sequential shots  
at approximately 10 frames/sec.  
When set to [,], [c], [d] or [+], the digital  
zoom (p. 21) is not available.  
37  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Menus forr Shootiing Funncctions  
The default settings of the function are highlighted in  
.
Restoringg the shooting functions to the default ssettinggss [[RReeset]  
I (Shooting menu 1) X Reset  
Submenu 2  
Application  
Restores the following menu functions to the default settings.  
• Shooting mode (p. 28)  
• Flash (p. 34)  
• Macro (p. 34)  
• Self-timer (p. 35)  
• Exposure compensation (p. 35)  
• White balance (p. 36)  
Yes  
• ISO (p. 36)  
• Drive (p. 37)  
• Menu functions in [I, J, A] (p. 38 to 43)  
No  
The current settings will not be changed.  
38  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Selecting the image quality for still images [Image Size/Compression]  
I (Shooting menu 1) X Image Size/Compression  
Submenu 1  
Submenu 2  
Application  
16M (4608x3456) *1  
14M (4288x3216) *2  
Suitable for printing pictures over A3 (11x17 in.).  
8M (3264x2448)  
5M (2560x1920)  
3M (2048x1536)  
2M (1600x1200)  
1M (1280x960)  
Suitable for printing pictures up to A3 (11x17 in.).  
Suitable for printing pictures at A4 (8.5x11 in.).  
Suitable for printing pictures up to A4 size (8.5x11 in.).  
Suitable for printing pictures at A5 (5x7 in.).  
Suitable for printing pictures at postcard size.  
Image Size  
Suitable for viewing pictures on a TV or using pictures on emails and web  
sites.  
VGA (640x480)  
16:9G (4608x2592)*1  
Suitable for playing pictures on a widescreen TV and for printing on A3 or  
11"x17".  
(4288x2416)*2  
Suitable for playing pictures on a widescreen TV and for printing on A5 or 5"  
Shooting at high quality.  
x7".  
16:9F (1920x1080)  
Fine  
Compression  
Normal  
Shooting at normal quality.  
*1  
*2  
SZ-20  
SZ-10  
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and cards” (p. 68, 69)  
Selecting the image quality for movies [Image Size/Image Quality]  
A (Movie menu) X Image Size/Image Quality  
Submenu 1  
Submenu 2  
Application  
1080P (SZ-20)  
720P  
VGA (640x480)  
QVGA (320x240)  
Image Size  
Select the image quality based on the image size and frame rate.  
Select [Fine] to shoot with higher image quality.  
Image Quality  
Fine/Normal  
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and cards” (p. 68, 69)  
When [Image Size] is set to [QVGA], [Image Quality] is xed to [Fine].  
39  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
To focus on a moving subject  
continuously (AF Tracking)  
1 Hold the camera to align the AF target mark on the  
subject and press the A button.  
Brightening the subject against  
backlight [Shadow Adjust]  
I (Shooting menu 1) X Shadow Adjust  
2 When the camera recognizes the subject, the AF  
target mark automatically tracks the subject movement  
to focus on it continuously.  
Submenu 2  
Auto  
Application  
Automatically On when a compatible  
shooting mode is selected.  
3 To cancel the tracking, press the A button.  
Depending on the subjects or the shooting conditions,  
the camera may be unable to lock the focus or fail to  
track the subject movement.  
Off  
On  
The effect is not applied.  
Shoot with automatic adjustment to  
brighten an area that has become  
darker.  
When the camera fails to track the subject movement,  
the AF target mark changes to red.  
When set to [Auto] or [On], [ESP/n] (p. 40) is  
automatically xed to [ESP].  
Selectting the method for measuring the  
brightness [ESP/n]  
Selectting the focusing area [AF Mode]  
I (Shooting menu 1) X ESP/n  
I (Shootin g menu 1) X AF Mode  
Submenu 2  
Application  
Submenu 2  
Application  
Shoots to obtain a balanced  
brightness over the entire screen  
(Meters the brightness at the center  
and surrounding areas of the screen  
separately).  
The camera focuses automatically.  
(If a face is detected, it is shown by  
a white frame*1; when the shutter  
button is pressed halfway and the  
camera focuses, the frame turns to  
green*2. If no face is detected, the  
camera chooses a subject in the  
frame and focuses automatically.)  
ESP  
Face/iESP*1  
Shoots the subject at the center  
during backlighting (Meters the  
brightness at the center of the  
screen).  
5 (spot)  
The camera focuses on the subject  
located within the AF target mark.  
Spot  
When set to [ESP], the center may appear dark when  
shooting against strong backlighting.  
The camera tracks the subject  
movement automatically to focus on  
it continuously.  
AF Tracking  
*1  
*2  
For some subjects, the frame may not appear or may  
take some time to appear.  
If the frame blinks in red, the camera cannot focus. Try  
refocusing on the subject.  
40  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Shooting at higher magnications than  
optical zoom [Digital Zoom]  
There may be a noise coming from inside the camera  
when the shutter button is pressed with [Image  
Stabilizer] (still images) set to [On].  
I (Shooting menu 1) X Digital Zoom  
Images may not be stabilized if camera shake is too  
severe.  
Submenu 2  
Application  
Disable digital zoom.  
Enable digital zoom.  
When the shutter speed is extremely slow, such as  
when taking pictures at night, [Image Stabilizer] (still  
images) may not be as effective.  
Off  
On  
Using the assist lamp for shooting a  
dark subjectt [AF Illuminat.]  
[Digital Zoom] is not available when [a Super  
Macro] (p. 35) is selected.  
The option selected for [Digital Zoom] affects the  
appearance of the zoom bar.  
J (Shooting menu 2) X AF Illuminat.  
To take larger images” (p. 21)  
Submenu 2  
Application  
Off  
On  
The AF illuminator is not used.  
Reducing the blur caused by the  
cameraa shake wwhen shhoooting  
[Image Stabilizer] (still images)/  
[IS Movie Mode] (movies)  
When the shutter button is pressed  
halfway down, the AF illuminator  
turns on to aid focusing.  
J (Shooting menu 2) X  
Image Stabilizer (still images)/  
A (Movie menu) X  
SZ-10  
SZ-20  
IS Movie Mode (movies)  
Submenu 2  
Application  
The image stabilizer is deactivated.  
This is recommended for shooting  
when the camera is xed in place on  
a tripod or other stable surface.  
AF illuminator  
Off  
On  
The image stabilizer is activated.  
Default setting  
SZ-10: [Image Stabilizer] [On], [IS Movie Mode] [Off]  
SZ-20: [Image Stabilizer] [On], [IS Movie Mode] [On]  
41  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Viewing the image immediately after  
Displaying icon guides [Icon Guide]  
shooting [Rec View]  
J (Shooting menu 2) X Icon Guide  
J (Shooting menu 2) X Rec View  
Submenu 2  
Application  
Submenu 2  
Application  
Off  
On  
No icon guide is displayed.  
The image being recorded is not  
displayed. This allows the user  
to prepare for the next shot while  
following the subject in the monitor  
after shooting.  
The explanation of the selected icon  
will be displayed when a shooting  
mode or function menu icon is  
selected (position the cursor on  
the icon for a while to display the  
explanation).  
Off  
On  
The image being recorded is  
displayed. This allows the user to  
make a brief check of the image that  
was just taken.  
Program Auto  
3D  
P
Functions can be changed  
Icon guide  
manually.  
0.0  
Automaticcally rootating images shot with  
the camera iin a vertiical posiition during  
playbacck [Piicc Orientation]  
WB  
AUTO  
ISO  
AUTO  
14M  
MENU  
4
J (Shooting menu 2) X Pic Orientation  
Imprinting the date of recording  
[Date SStamp]  
During shooting, the [y] (p. 47) setting on the  
playback menu is set automatically.  
This function may not work properly if the camera is  
facing up or down during shooting.  
J (Shooting menu 2) X Date Stamp  
Submenu 2  
Application  
Submenu 2  
Application  
Off  
On  
Do not imprint the date.  
Information about the vertical/  
horizontal orientation of the camera  
during shooting is not recorded with  
images. Images shot with the camera  
in a vertical position are not rotated  
during playback.  
Stamp new photographs with the  
date of recording.  
Off  
On  
When the date and time are not set, [Date Stamp]  
cannot be set.  
“Date, time, time zone, and language” (p. 17)  
Information about the vertical/  
horizontal orientation of the camera  
during shooting is recorded with  
images. Images are automatically  
rotated during playback.  
The date stamp can not be deleted.  
[Date Stamp] is not available in [Panorama] or [3D]  
mode.  
42  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Recordingg sound when shooting  
movies [R]  
A (Movie menu) X R  
Submenu 2  
Application  
No sound is recorded.  
Sound is recorded.  
Off  
On  
When set to [On], only the digital zoom can be used  
during movie recording. To record the movie with the  
optical zoom, set [R] (movie sound recording) to [Off]  
(SZ-10).  
43  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Menus forr Playbback, EEditingg, and PPrintinng Funcctions  
The default settings of the function are highlighted in  
.
Searchhing for images and playing back  
the relatted imagges [Phhoto Surng]  
Data must be created with the [ib] (PC software)  
before using some functions.  
q(Playback menu) X Photo Surng  
In [Photo Surng], images can be searched and related  
images can be played back by selecting the related items.  
Refer to the [ib] (PC software) help guide for details  
on how to use the [ib] (PC software).  
For details on installing the [ib] (PC software), see  
“Setting up using the supplied CD” (p. 13).  
To start [Photo Surng]  
Press the A button to start [Photo Surng].  
When a related item of the image displayed is selected  
with FG, images related to the item are displayed in the  
lower part of the monitor. Use HI to display an image.  
To select related items that are not displayed, press the  
A button when selecting an item.  
Playing back pictures automatically  
[Slideshow]  
q(Playback menu) X Slideshow  
To stop [Photo Surng]  
Submenu 2  
Slide  
Submenu 3  
Application  
To stop [Photo Surng], use FG to select [ALL], then  
Selects the content  
to be included in the  
slideshow.  
All/Event/  
Collection*1  
press the A button.  
ALL  
ALL  
2011/  
02/26  
Off/Cosmic/  
Breeze/  
Mellow/  
Dreamy/  
Urban  
Selects the background  
music options.  
BGM  
Related items  
35ºN  
139ºE  
Selects the type of  
transition effect used  
between slides.  
Standard/  
Fade/Zoom  
Type  
Start  
Starts the slideshow.  
Images corresponding the  
related items  
*1  
The [Collection] that has been created with the [ib] (PC  
software) and imported back from a computer can play  
back.  
During a slideshow, press I to advance one frame,  
H to go back one frame.  
44  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Using the [ib] (PC software) and  
importing data back to the camera  
Cropping image [P]  
q(Playback menu) X Edit X P  
Refer to the [ib] (PC software) help guide for details  
on how to use the [ib] (PC software).  
1 Use HI to select an image, and press the A button.  
2 Use the zoom lever to select the size of the cropping  
frame, and use FGHI to move the frame.  
The [ib] (PC software) may not work properly on the  
pictures edited by other application software.  
The following [Photo Surng] functions can be  
performed when data created with the [ib] (PC  
software) is imported back to the camera.  
Cropping frame  
Information of persons or shooting locations and new  
Collections can be added in the related items.  
Changing the image size [Q]  
OK  
Set  
q(Playback menu) X Edit X Q  
3 Press the A button after you have selected the area  
to trim.  
The edited image is saved as a separate image.  
Submenu 3  
Application  
This saves a high-resolution image  
as a separate image with a smaller  
size for use in e-mail attachments  
and other applications.  
C640 x 480  
Adding sound to still images [R]  
E320 x 240  
q(Playback menu) X Edit X R  
1 Use HI to select an image.  
1 Use HI to select an image.  
2 Aim the microphone toward the sound source.  
2 Use FG to select an image size and press the A  
button.  
Microphone  
The resized image is saved as a separate image.  
3 Press the A button.  
Recording starts.  
The camera adds (records) sound for approx.  
4 seconds while playing back the image.  
45  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Retouching the skin and eyes  
[Beautty Fix]  
Brightening areas that are dark  
due to backlight or other reasons  
[Shadow Adj]  
q(Playback menu) X Edit X Beauty Fix  
q(Playback menu) X Edit X Shadow Adj  
Depending on the picture, the editing may not be  
effective.  
1 Use HI to select an image, and press the A button.  
The edited image is saved as a separate image.  
Submenu 3  
All  
Submenu 4  
Application  
Depending on the picture, the editing may not be  
effective.  
[Clear Skin], [Sparkle  
Eye] and [Dramatic Eye]  
are applied together.  
The retouching process may lower the image  
resolution.  
Makes skin look smooth  
and translucent. Select  
the correction effect  
from 3 levels.  
Clear Skin  
Soft/Avg/Hard  
Retouuching red eyes in ashh shooting  
[Redeyye Fix]  
Enhances the contrast  
of the eyes.  
Sparkle Eye  
q(Playback menu) X Edit X Redeye Fix  
Enlarges the subject’s  
eyes.  
1 Use HI to select an image, and press the A button.  
Dramatic Eye  
The edited image is saved as a separate image.  
1 Use FG to select a correction item, and press the A  
button.  
Depending on the picture, the editing may not be  
effective.  
2 Use HI to select an image for retouching, and press  
the A button.  
The retouching process may lower the image  
resolution.  
The retouched image is saved as a separate  
image.  
Erasing images [Erase]  
When [Clear Skiin] is selected  
Use FG to select the retouching level, and press the  
q(Playback menu) X Erase  
A button.  
Submenu 2  
All Erase  
Application  
Clear Skin  
All images in the internal memory or  
card will be erased.  
Images are individually selected and  
erased.  
Soft  
Avg  
Sel. Image  
Erase  
Hard  
Deletes the image displayed.  
MENU  
OK  
Set  
Back  
46  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
When erasing pictures in the internal memory, do not  
insert the card into the camera.  
Saving print settings to the image data  
[Print Order]  
Protected images cannot be erased.  
q(Playback menu) X Print Order  
With SZ-20, the grouped sequential images can be  
erased collectively. (p. 23)  
“Print reservations (DPOF)” (p. 58)  
Print reservation can be set only for still images that  
are recorded to the card.  
To individually select and erase images  
[Sel. Image]  
1 Use FG to select [Sel. Image], and press the  
A button.  
Protectiing images [R]  
2 Use HI to select the image to be erased, and press  
the A button to add a R mark to the image.  
q(Playback menu) X R  
Protected images cannot be erased by [Erase] (p. 24,  
46), [Sel. Image] (p. 47), or [All Erase] (p. 47), but  
all images are erased by [Memory Format]/[Format]  
(p. 48).  
Turn the zoom lever to the W end to display an  
index view. Images can be quickly selected using  
the FGHI buttons. Turn to the T end to return  
to the single frame display.  
1 Use HI to select an image.  
2 Press the A button.  
4/30  
Sel. Image  
Press the A button again to cancel the settings.  
3 If necessary, repeat Steps 1and 2to protect other  
images, and press the m button.  
R mark  
Rotating images [y]  
OK  
MENU  
Erase/Cancel  
q(Playback menu) X y  
3 Repeat Step 2to select the images to be erased,  
and then press the m button to erase the selected  
1 Use HI to select an image.  
images.  
2 Press the A button to rotate the image.  
3 If necessary, repeat Steps 1and 2to make settings  
for other images, and press the m button.  
4 Use FG to select [Yes], and press the A button.  
The images with a R mark are erased.  
The new picture orientations will be saved even after  
the power is turned off.  
To erase all images [All Erase]  
1 Use FG to select [All Erase], and press the  
A button.  
2 Use FG to select [Yes], and press the A button.  
47  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Menus for OOther Caamera Seettings  
The default settings of the function are highlighted in  
.
Erasing data completely  
[Memoryy Formaatt]/[Foormat]  
Copying images in the internal memory  
to the card [Backup]  
r (Settings 1) X Memory Format/Format  
r (Settings 1) X Backup  
Before formatting, check that no important data is left  
in the internal memory or card.  
Submenu 2  
Application  
Backs up image data in the internal  
memory to the card.  
Cards must be formatted with this camera before  
rst use or after being used with other cameras or  
computers.  
Yes  
No  
Cancels the backup.  
Be sure to remove the card before formatting the  
internal memory.  
Using an Eye-Fi card [Eye-Fi]  
Submenu 2  
Yes  
No  
Application  
r (Settings 1) X Eye-Fi  
Completely erases the image data  
in the internal memory or card  
(including protected images).  
Submenu 2  
Application  
Off  
On  
Disable Eye-Fi communication.  
Enable Eye-Fi communication.  
Cancels formatting.  
When using an Eye-Fi card, read the Eye-Fi card  
instruction manual carefully, and comply with the  
instructions.  
Use the Eye-Fi card in compliance with the laws and  
regulations of the country where the camera is used.  
In locations such as on an airplane, where the Eye-Fi  
communication is prohibited, remove the Eye-Fi card  
from the camera, or set [Eye-] to [Off].  
This camera does not support the Eye-Fi card’s  
Endless mode.  
48  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Selectting a method for connecting  
the camerra to otther deevices  
[USB Connnection]  
Turning on the camera with the q  
button [qPower On]  
r (Settings 1) X qPower On  
r (Settings 1) X USB Connection  
Submenu 2  
Application  
Submenu 2  
Auto  
Application  
The camera is not turned on. To turn  
on the camera, press the n  
button.  
No  
When the camera is connected to  
another device, the settings selection  
screen is displayed.  
Press and hold the qbutton to turn  
the camera on in the playback mode.  
Yes  
Select when connecting the camera  
to a computer via a storage device.  
Storage  
MTP  
Select when transferring images  
without using the supplied [ib] (PC  
software) on Windows Vista/  
Windows 7.  
Saving the mode when the camera is  
z
turned off [Keep Settings]  
z
r (Settings 1) X Keep Settings  
Select when connecting to a  
PictBridge-compatible printer.  
Print  
Submenu 2  
Application  
The shooting mode is saved when  
the camera is turned off and is  
reactivated the next time the camera  
is turned on.  
Systemm requuirements  
Windows  
:
Windows XP Home Edition/  
Professional (SP1 or later)/  
Vista/Windows 7  
Yes  
The shooting mode is set to P mode  
when the camera is turned on.  
Macintosh  
:
Mac OS X v10.3 or later  
No  
When using another system other than Windows XP  
(SP2 or later)/Windows Vista/Windows 7, set to  
[Storage].  
Choosing the opening screen display  
[Pw On Setup]  
Even if a computer has USB ports, proper operation  
is not guaranteed in the following cases:  
Computers with USB ports installed using an  
expansion card, etc.  
r (Settings 1) X Pw On Setup  
Computers without a factory-installed OS and  
home-built computers  
Submenu 2  
Application  
Off  
On  
No opening screen is displayed.  
The opening screen is displayed  
when the camera is turned on.  
49  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Selecting the camera souund and its volume [Sound Settings]  
s (Settings 2) X Sound Settings  
Submenu 2  
Sound Type  
Submenu 3  
1/2/3  
Application  
Selects the camera sounds (operation sounds, shutter sound, and  
warning sound).  
q Volume  
Selects the image playback volume.  
0/1/2/3/4/5  
0/1/2/3/4/5  
Volume  
Selects the operation volume of camera buttons.  
Resetttingg tthe le namees of piicturees [File Name]  
s (Settings 2) X File Name  
Submenu 2  
Application  
Folder name  
DCIM  
Folder name  
100OLYMP  
File name  
This resets the sequential number  
for the folder name and le name  
whenever a new card is inserted.*1  
This is useful when grouping images  
on separate cards.  
Pmdd0001.jpg  
Reset  
Even when a new card is inserted,  
this continues the numbering for  
the folder name and le name from  
the previous card. This is useful for  
managing all image folder names  
and les names with sequential  
numbers.  
999OLYMP  
Pmdd9999.jpg  
Auto  
Automatic  
numbering  
Automatic  
numbering  
*1  
The number for the folder name is reset to 100, and the  
one for the le name is reset to 0001.  
Month: 1 to C  
(A=October,  
B=November,  
C=December)  
Pmdd  
Day: 01 to 31  
50  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Adjusting the image processing  
function [Pixel Mapping]  
Adjusting the brightness of the monitor  
[s]  
s (Settings 2) X Pixel Mapping  
s (Settings 2) X s  
This function has already been adjusted at factory  
shipping, and no adjustment is needed right  
after purchase. Approximately once a year is  
recommended.  
To adjust the monitor brightness  
1 Use FG to adjust the brightness while viewing the  
screen, and then press the A button.  
For best results, wait at least one minute after taking  
or viewing pictures before performing pixel mapping.  
If the camera is turned off during pixel mapping, be  
sure to perform it again.  
s
To adjust the image processing function  
Press the A button when [Start] (Submenu 2) is  
displayed.  
MENU  
OK  
Set  
Back  
The check and adjustment of the image processing  
function starts.  
Playing back images on a TV [TV Out]  
s (Settings 2) X TV Out  
The TV video signal system varies depending on the countries and regions. Before viewing camera images on your  
TV, select the video output according to your TV’s video signal type.  
Submenu 2  
Video Out  
Submenu 3  
NTSC  
Application  
Connecting the camera to a TV in North America, Taiwan, Korea, Japan,  
and so on.  
PAL  
Connecting the camera to a TV in European countries, China, and so on.  
Set the signal format to be given priority. If the TV setting does not match,  
it is changed automatically.  
480p/576p, 720p,  
1080i  
HDMI Out  
Operate with the camera.  
Off  
On  
HDMI Control  
Operate with the TV remote control.  
The factory default settings differ according to the region where the camera is sold.  
51  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
To play back camera iimagess on a TV  
Connection via AV cable  
1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).  
2 Connect the TV and camera.  
Open the connector cover  
in the direction of the arrow.  
Multi-connector  
Connect to the TV video input  
jack (yellow) and audio input jack  
(white).  
AV cable (supplied)  
Connection via HDMI cable  
1 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]).  
2 Connect the TV and camera.  
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”  
4 Turn on the camera, and use HI to select the image for playback.  
When the camera is connected to the computer by the USB cable, do not connect the HDMI cable to the camera.  
Open the connector cover  
in the direction of the arrow.  
HDMI micro  
connector  
(type D)  
Connect to the HDMI  
connector on the TV.  
Type A  
HDMI cable (sold separately: CB-HD1)  
52  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Type C  
Type D (CB-HD1)  
For details on changing the input source of the TV, refer to the TV’s instruction manual.  
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.  
Depending on the TV’s settings, the displayed images and information may become cropped.  
To operate images with the TV remote control  
1 Set [HDMI Control] to [On], and turn off the camera.  
2 Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 52)  
3 First turn on the TV, and then turn on the camera.  
Operate by following the operation guide that is displayed on the TV.  
With some TVs, operations cannot be performed with the TV remote control even though the operation guide is  
displayed on the screen.  
If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the  
camera.  
Saving battery ppower between shots  
[Power Save]  
Changing the display language [l]  
s (Settings 2) X l  
s (Settings 2) X Power Save  
Submenu 2  
Languages  
Application  
Submenu 2  
Application  
The language for the menus and  
error messages displayed on the  
monitor is selected.  
Off  
On  
Cancels [Power Save].  
When the camera is not being used  
for approx. 10 seconds, the monitor  
automatically turns off to save  
battery power.  
To resume staandby mode  
Press any button.  
53  
EN  
For information on using the menus, see “Setup menu” (p. 6).  
Setting the date and time [X]  
t (Settings 3) X X  
“Date, time, time zone, and language” (p. 17).  
To select the date display order  
1 Press I after setting Minute, and use FG to select the date  
X
display order.  
Y
M
D
Time  
2 Press the A button to set.  
Y/M/D  
2011.02.26 00:00  
To check the date and time  
Press the INFO button while the camera is turned off. The current time  
Date order  
is displayed for approx. 3 seconds.  
MENU  
OK  
Set  
Cancel  
Choosing home and alternate time zones [World Time]  
t (Settings 3) X World Time  
You will not be able to select a time zone using [World Time] if the camera clock has not rst been set using [X].  
Submenu 2  
Submenu 3  
Application  
x
The time in the home time zone (the time zone selected for x in submenu 2).  
Home/Alternate  
The time in the travel destination time zone (the time zone selected for z in  
submenu 2).  
z
x*1  
z*1, 2  
Select the home time zone (x).  
Select the travel destination time zone (z).  
*1  
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on.  
When you select a time zone, the camera automatically calculates the time difference between the selected zone and  
the home time zone (x) to display the time in the travel destination time zone (z).  
*2  
Restorinng data in the camera [Dataa Repair]  
t (Settings 3) X Data Repair  
Playback will become available by performing [Data Repair] when the Photo surng function is not activated  
properly. However, data such as collections and other groups created with the [ib] (PC software) is deleted from the  
database in the camera.  
Import the data back into the camera from a computer to playback the data created with the [ib] (PC software).  
54  
EN  
Printing  
Direct printing (PictBridge*1)  
Turn on the printer, and then connect the  
printer and camera.  
2
By connecting the camera to a PictBridge-compatible  
printer, you can print images directly without using a  
computer.  
Open the connector cover  
in the direction of the arrow.  
To nd out if your printer supports PictBridge, refer to the  
printer’s instruction manual.  
*1  
PictBridge is a standard for connecting digital  
cameras and printers of different makers and  
printing out pictures directly.  
Multi-connector  
The printing modes, paper sizes, and other  
parameters that can be set with the camera vary  
depending on the printer that is used. For details,  
refer to the printer’s instruction manual.  
USB cable  
(supplied)  
For details on the available paper types, loading  
paper, and installing ink cassettes, refer to the  
printer’s instruction manual.  
I button  
Printing images at the printer’s  
standard settings [Easy Print]  
In the setup menu, set [USB Connection] to [Print].  
“USB Connection” (p. 49)  
Display the image to be printed on the  
monitor.  
1
Easy Print Start  
Custom Print OK  
“Viewing images” (p. 22)  
Press I to start printing.  
3
4
To print another image, use HI to select an  
image, and press the A button.  
To exit printing  
After a selected image is displayed on the screen,  
disconnect the USB cable from the camera and printer.  
55  
EN  
Changing the printer’s settings for  
printing [Custom Print]  
Submenu 4  
Off/On*1  
Application  
The image is printed with a border  
around it ([Off]).  
The image is printed to ll the entire  
paper ([On]).  
Follow Steps 1 and 2 for [Easy Print] (p. 55).  
1
(The number of  
images per sheet  
varies depending  
on the printer.)  
Press the A button.  
The number of images per sheet  
([Pics/Sheet]) is selectable only when  
[Multi Print] is selected in Step 3.  
2
Use FG to select the print mode, and press  
the A button.  
3
*1  
The available settings for [Borderless] vary depending  
on the printer.  
Submenu 2  
Print  
Application  
If [Standard] is selected in Steps 4 and 5, the image  
is printed at the printer’s standard settings.  
This prints the image selected in  
Step 6.  
4/30  
This prints all images stored in the  
internal memory or card.  
All Print  
This prints one image in a multiple  
layout format.  
Multi Print  
All Index  
14M  
NORM  
FILE  
100 0004  
’11/02/26 00:00  
This prints an index of all images  
stored in the internal memory or card.  
OK  
Print  
More  
Single Print  
This prints images based on the print  
reservation data on the card.  
Print Order*1  
Use HI to select an image.  
6
7
*1  
[Print Order] is available only when print reservations  
have been made. “Print Reservations (DPOF)” (p. 58)  
Press F to make a print reservation for the  
current image.  
Press G to make the detailed printer settings  
for the current image.  
Use FG to select [Size] (Submenu 3), and  
press I.  
4
5
To make the detailed printer settings  
1 Use FGHI to select the setting, and press the  
A button.  
If the [Printpaper] screen is not displayed, the [Size],  
[Borderless], and [Pics/Sheet] are set to the printer’s  
standard.  
Use FG to select the [Borderless] or [Pics/  
Sheet] settings, and press the A button.  
56  
EN  
Submenu 5 Submenu 6  
Application  
Press the A button.  
9
<X  
0 to 10  
This selects the number of prints.  
Print  
Selecting [With] prints the  
images with the date.  
Date  
With/Without  
Selecting [Without] prints the  
images without the date.  
Print  
Cancel  
Selecting [With] prints the le  
name on the image.  
File Name  
With/Without Selecting [Without] does not  
print any le name on the  
image.  
MENU  
OK  
Set  
Back  
Use FG to select [Print], and press the  
A button.  
10  
(Proceeds to  
This selects a portion of the  
the setting  
P
Printing starts.  
image for printing.  
screen.)  
When [Option Set] is selected in [All Print] mode,  
[Print Info] screen is displayed.  
To crop an image [P]  
When printing is nished, the [Print Mode Select]  
screen is displayed.  
1 Use the zoom lever to select the size of the cropping  
frame, use FGHI to move the frame, and then  
press the A button.  
To cancel printing  
1 Press the m button while [Do Not Remove USB  
Cropping frame  
Cable] is displayed.  
2 Select [Cancel] using FG and then press the A  
button.  
OK  
Set  
Do Not Remove USB Cable  
2 Use FG to select [OK], and press the A button.  
MENU  
Cancel  
Continue  
Cancel  
If necessary, repeat Steps 6 and 7 to select  
the image to be printed, make the detailed  
settings, and set [Single Print].  
8
OK  
Set  
Press the m button.  
11  
12  
When the message [Remove USB Cable] is  
displayed, disconnect the USB cable from the  
camera and printer.  
57  
EN  
Print Reservations (DPOF*1)  
4/30  
0
In print reservations, the number of prints and date imprint  
option are saved in the image on the card. This enables  
easy printing at a printer or print shop supporting DPOF  
by using only the print reservations on the card without a  
computer or a camera.  
14M  
NORM  
FILE  
100 0004  
’11/02/26 00:00  
*1  
DPOF is a standard for storing automatic printout  
information from digital cameras.  
OK  
Set  
Print reservations can be set only for the images  
stored on the card. Insert a card with recorded  
images before making print reservations.  
Use HI to select the image for print  
reservation. Use FG to select the quantity.  
Press the A button.  
4
DPOF reservations set by another DPOF device  
cannot be changed by this camera. Make changes  
using the original device. Making new DPOF  
reservations with this camera will erase the  
reservations made by the other device.  
X
No  
Date  
Time  
DPOF print reservations can be made for up to 999  
images per card.  
MENU  
OK  
Set  
Back  
Single-frame print reservations [<]  
Use FG to select the [X] (date print)  
screen option, and press the A button.  
5
Display the setup menu.  
1
“Setup menu” (p. 6)  
Submenu 2  
Application  
No  
This prints the image only.  
From the playback menu q, select [Print  
Order] and then press the A button.  
2
This prints the image with the  
shooting date.  
Date  
Time  
Print Order  
This prints the image with the  
shooting time.  
<
U
Print Order  
(
)
1
1
MENU  
OK  
Set  
Exit  
Set  
Cancel  
Use FG to select [<], and press the  
A button.  
3
MENU  
OK  
Set  
Back  
58  
EN  
Resetting the print reservation data  
for selected images  
Use FG to select [Set], and press the  
A button.  
6
Reserving one print each of all images  
on the card [  
Follow Steps 1 and 2 in [<] (p. 58).  
1
U]  
Use FG to select [<], and press the  
A button.  
2
Follow Steps 1 and 2 in [<] (p. 58).  
1
2
Use FG to select [Keep] and press the  
A button.  
3
Use FG to select [U], and press the A  
button.  
Use HI to select the image with the print  
reservation you want to cancel. Use FG to  
set the print quantity to “0”.  
4
Follow Steps 5 and 6 in [<].  
3
Resetting all print reservation data  
If necessary, repeat Step 4, and then press  
the A button when nished.  
5
Follow Steps 1 and 2 in [<] (p. 58).  
1
2
Use FG to select the [X] (date print)  
screen option, and press the A button.  
The settings are applied to the remaining images  
6
Select either [<] or [U], and press the  
A button.  
with the print reservation data.  
Print Order Setting  
Print Ordered  
Use FG to select [Set], and press the  
A button.  
7
Reset  
Keep  
MENU  
OK  
Set  
Back  
Use FG to select [Reset], and press the  
A button.  
3
59  
EN  
Usage Tips  
If the camera does not work as intended, or if an error  
message is displayed on the screen, and you are unsure  
of what to do, refer to the information below to x the  
problem(s).  
With prolonged camera use, the internal  
temperature may increase, resulting in automatic  
shutdown. If this occurs, remove the battery from  
the camera and wait until the camera has sufciently  
cooled. The camera’s external temperature may  
also increase during use, however this is normal and  
does not indicate malfunction.  
Troubleshooting  
Battery  
Monitor  
“The camera does not work even when batteries are  
installed”.  
“Difcult to see”.  
Condensation*1 may have occurred. Turn off the  
Insert recharged batteries in the correct direction.  
power, and wait for the camera body to become  
acclimated to the surrounding temperature and dry  
out before taking pictures.  
“Inserting the battery” (p. 13), “Charging the battery  
and setting up using the supplied CD” (p. 13),  
“Charging the battery with the included USB-AC  
adapter” (p. 16)  
*1  
Dew drops can form in the camera when it is  
suddenly taken from a cold location into a warm,  
humid room.  
Battery performance may have been reduced  
temporarily due to low temperature. Take the  
batteries out of the camera, and warm them by  
putting them in your pocket for a while.  
“Vertical lines appear on the screen”.  
This condition may occur when the camera is  
pointed at an extremely bright subject under a clear  
sky and so on. The lines do not appear, however,  
in the nal image.  
Card/Internal memory  
“An error message is displayed”.  
“Error message” (p. 61)  
“The light is caught in the picture”.  
Shooting with ash in dark situations results in an  
image with many ash reections on dust in the air.  
Shutter button  
“No picture is taken when the shutter button is pressed”.  
Date andd time function  
“Date and time settings return to the default setting”.  
Cancel sleep mode.  
If the batteries are removed and left out of the  
camera for about 3 days*2, the date and time settings  
return to the default setting, and must be reset.  
To save battery power, the camera automatically  
goes into sleep mode and the monitor turns off  
if there is no operation for 3 minutes when the  
camera is turned on. No picture is taken even if  
the shutter button is fully pressed in this mode.  
Operate the zoom lever or other buttons to restore  
the camera from sleep mode before taking a  
picture. If the camera is left for another 12 minutes,  
it automatically turns off. Press the n button  
to turn the camera on.  
*2  
The time until the date and time settings return to  
the default setting varies depending on how long  
the batteries have been loaded.  
“Date, time, time zone, and language” (p. 17)  
Miscelllaneous  
“The camera makes a noise when taking pictures”.  
The camera may activate the lens and make a  
noise even if no operation is performed. This  
is because the camera automatically performs  
actions of auto focus as far as it is ready to shoot.  
Press the qbutton to switch to the shooting  
mode.  
Wait until #(ash charge) stops blinking before  
taking pictures.  
60  
EN  
Error message  
Error message  
Corrective action  
Problem with selected image  
Use photo retouch software, etc. to  
edit the image on a computer.  
When one of the messages below is displayed on the  
monitor, check the corrective action.  
The Image Cannot  
Be Edited  
Error message  
Corrective action  
Card problem  
Battery problem  
Charge the battery.  
Insert a new card.  
Battery Empty  
No Connection  
No Paper  
Card Error  
Connection problem  
Connect the camera and computer  
or printer correctly.  
Card problem  
The card write-protect switch is  
set to the “LOCK” side. Release  
the switch.  
Write Protect  
Memory Full  
Printer problem  
Load paper into the printer.  
Internal memory problem  
• Insert a card.  
• Erase unwanted images.*1  
Printer problem  
Rell the ink in the printer.  
Card problem  
No Ink  
• Replace the card.  
• Erase unwanted images.*1  
Card Full  
Printer problem  
Remove the jammed paper.  
Card Setup  
Card problem  
Jammed  
Use FG to select [Format], and  
press the A button. Next, use  
FG to select [Yes], and press the  
A button.*2  
Power Off  
Format  
Printer problem  
Return to the status where the  
printer can be used.  
Settings  
Changed*3  
OK  
Set  
Printer problem  
Memory Setup  
Internal memory problem  
Turn off the camera and printer,  
check the printer for any problems,  
and then turn the power on again.  
Use FG to select [Memory  
Format], and press the A button.  
Next, use FG to select [Yes], and  
press the A button.*2  
Power Off  
Memory Format  
Print Error  
OK  
Set  
Problem with selected image  
Use a computer to print.  
Cannot Print*4  
Internal memory/Card problem  
*1  
Take pictures before viewing them.  
Before erasing important images, download them to a  
computer.  
All data will be erased.  
This is displayed, for instance, when the printer’s paper  
tray has been removed. Do not operate the printer while  
making the print settings on the camera.  
This camera may be unable to print images taken by  
other cameras.  
No Picture  
*2  
*3  
Problem with selected image  
Use photo retouch software, etc.  
to view the image on a computer.  
If the image still cannot be viewed,  
the image le is corrupted.  
Picture Error  
*4  
61  
EN  
Shooting tips  
When you are unsure of how to take a picture that you  
envision, refer to the information below.  
Object with no vertical lines*1  
Focusing  
*1  
It is also effective to compose the shot by holding the  
camera vertically to focus, and then returning to the  
horizontal position to take the picture.  
“Focusing on the subject”  
Taking a picture of a subject not in the center  
of the screen  
After focusing on an object at the same distance  
as the subject, compose the shot, and take the  
picture.  
When objects are at different  
distances  
Pressing the shutter button halfway (p. 20)  
Set [AF Mode] (p. 40) to [Face/iESP]  
Taking a picture in [AF Tracking] mode (p. 40)  
The camera tracks the subject movement  
automatically to focus on it continuously.  
Fast-moving object  
Taking a picture of a shadowy subject  
Using the AF illuminator makes focusing easier.  
[AF Illuminat.] (p. 41)  
Taking a picture of subjects where autofocus  
is difcult  
The subject is not in the center of  
the frame  
In the following cases, after focusing on an object  
(by pressing the shutter button halfway down) with  
high contrast at the same distance as the subject,  
compose the shot, and take the picture.  
Subjects with low contrast  
When extremely bright objects  
appear in the center of the screen  
62  
EN  
Taking pictures of a white beach or snow scene  
Camera shake  
Set the mode to [q Beach & Snow] (p. 29)  
Taking pictures using exposure compensation  
(p. 35)  
“Taking pictures without camera shake”  
Taking pictures using [Image Stabilizer] (p. 41)  
Adjust the brightness while viewing the screen for  
taking the picture. Normally, taking pictures of white  
subjects (such as snow) results in images that are  
darker than the actual subject. Use the exposure  
compensation to adjust in the positive (+) direction  
to express whites as they appear. When taking  
pictures of black subjects, on the other hand, it is  
effective to adjust in the negative (-) direction.  
The image pickup device*1 shifts to correct for  
camera shake even if the ISO sensitivity is not  
increased. This function is also effective when  
taking pictures at a high zoom magnication.  
*1  
A device that takes light received through the  
lens and converts it into electric signals.  
Shooting movies using [IS Movie Mode] (p. 41)  
Select [C Sport] in the scene mode (p. 29)  
Color hue  
The [C Sport] mode uses a fast shutter speed and  
can reduce the blur incurred by a moving subject.  
“Taking pictures with colors at the same shade as  
they appear”  
Taking pictures at a high ISO sensitivity  
If a high ISO sensitivity is selected, pictures can  
be taken at a high shutter speed even at locations  
where a ash cannot be used.  
Taking pictures by selecting white balance  
(p. 36)  
Best results in most environments can normally  
be obtained with the [WB Auto] setting, but for  
some subjects, you should try experimenting  
with different settings. (This is especially true for  
sunshade under a clear sky, mixed natural and  
articial light settings, and so on.)  
“Selecting the ISO sensitivity” (p. 36)  
Exposure (brightness)  
“Taking pictures with the right brightness”  
Taking pictures of a subject against a backlight  
Faces or backgrounds are bright even when shot  
against backlight.  
Image quality  
[Shadow Adjust] (p. 40)  
“Taking sharper pictures”  
Taking pictures using [Face/iESP] (p. 40)  
Appropriate exposure is obtained for a face against  
backlight, and the face is brightened.  
Taking pictures with the optical zoom  
Avoid using digital zoom (p. 41) to take pictures.  
Taking pictures at a low ISO sensitivity  
If the picture is taken with a high ISO sensitivity,  
noise (small colored spots and color unevenness  
that were not in the original image) can occur, and  
the image can appear grainy.  
Taking pictures using [n] for [ESP/n]  
(p. 40)  
Brightness is matched with a subject in the center  
of the screen and the image is not affected by  
background light.  
“Selecting the ISO sensitivity” (p. 36)  
Taking pictures using [Fill In] (p. 34) ash  
A subject against backlight is brightened.  
63  
EN  
Playback/Editing tips  
Panorama  
“Taking pictures so that the frames are stitched  
smoothly”  
Playback  
A tip for panoramic shooting  
“Playing images in the internal memory and card”  
Taking pictures by pivoting with the camera at the  
center prevents shifting of the image. When taking  
pictures of close objects in particular, pivoting with  
the lens end at the center produces favorable  
results.  
Remove the card and display the images in  
internal memory  
“Inserting the battery” (p. 13), “Inserting the  
card” (p. 17)  
[Panorama] (p. 30)  
“Viewing images with high picture quality on a high-  
denition TV”  
Connect the camera to the TV using an HDMI  
cable (sold separately)  
Batteries  
To play back camera images on a TV” (p. 51)  
“Making batteries last longer”  
Avoid any of the following operations when not  
actually taking pictures because they deplete  
the battery power  
Editing  
Repeatedly pressing the shutter button  
halfway.  
“Erasing the sound recorded to a still image”  
Record over the sound with silence when  
playing back the image  
Repeatedly using the zoom.  
Set [Power Save] (p. 53) to [On]  
“Adding sound to still images [R]” (p. 45)  
64  
EN  
Appendix  
Camera care  
Battery and USB-AC adapter  
This camera uses one Olympus lithium ion battery  
(LI-50B). No other type of batteries can be used.  
Exterior  
Wipe gently with a soft cloth. If the camera is very dirty,  
soak the cloth in mild soapy water and wring well. Wipe  
the camera with the damp cloth and then dry it with a  
dry cloth. If you have used the camera at the beach,  
use a cloth soaked in clean water and wrung well.  
Caution:  
There is a risk of explosion if the battery is replaced  
with the incorrect battery type.  
Dispose of the used battery following the instructions.  
(p. 72)  
Power consumption by the camera varies depending on  
which functions are used.  
During the conditions described below, power is  
consumed continuously and the battery becomes  
exhausted quickly.  
Monitor  
Wipe gently with a soft cloth.  
Lens  
Blow dust off the lens with a commercial blower, then  
wipe gently with a lens cleaner.  
The zoom is used repeatedly.  
Battery/USB-AC adapter  
The shutter button is pressed halfway repeatedly in  
shooting mode, activating the auto focus.  
A picture is displayed on the monitor for an extended  
period of time.  
Wipe gently with a soft, dry cloth.  
Do not use strong solvents such as benzene or  
alcohol, or chemically treated cloth.  
The camera is connected to a printer.  
Mold may form on the lens surface if the lens is left  
dirty.  
Using an exhausted battery may cause the camera to  
turn off without displaying the battery level warning.  
The rechargeable battery is not fully charged at the  
time of purchase. Before using the camera, charge it  
by connecting it to a computer, or charge it using the  
included USB-AC adapter F-2AC or a separately sold  
charger LI-50C.  
When the included USB-AC adapter F-2AC is used,  
charging usually takes approximately 3.5 hours (varies  
on usage).  
The included USB-AC adapter is for charging. The  
playback is available while charging. Do not take a  
picture while the USB-AC adapter is connected to the  
camera.  
Storage  
When storing the camera for extended periods, remove  
the battery, USB-AC adapter and card, and keep in a  
cool, dry place that is well ventilated.  
Periodically insert the battery and test the camera  
functions.  
Avoid leaving the camera in places where chemical  
products are handled since this may result in  
corrosion.  
The included USB-AC adapter F-2AC is designed to be  
used only with this camera. Other cameras cannot be  
charged with this USB-AC adapter.  
Do not connect the included USB-AC adapter F-2AC to  
equipment other than this camera.  
65  
EN  
For plug-in type USB-AC adapter:  
The included USB-AC adapter F-2AC is intended to be  
correctly orientated in a vertical or oor mount position.  
Using the card  
A card (and internal memory) also corresponds to the  
lm that records images in a lm camera. Otherwise, the  
recorded images (data) can be erased, and retouching is  
also available with the use of a computer. Cards can be  
removed from the camera and exchanged, but this is not  
possible with the internal memory. Use of larger capacity  
cards enables you to take more pictures.  
Charging the battery by connecting the  
camera to a computer  
The battery can be charged by connecting the camera to  
a computer.  
Cards ccompattible with this camera  
SD/SDHC/SDXC/Eye-Fi card (commercially available) (for  
compatibility card details, visit the Olympus website.)  
Using a separately sold AC adapter  
The USB-AC adapter F-3AC (sold separately) can be  
used with this camera. Do not use any AC adapter other  
than the dedicated one. When using F-3AC, be sure to  
use the USB cable included with this camera.  
Do not use any other AC adapter with this camera.  
Using a separately sold charger  
A charger (LI-50C: sold separately) can be used to charge  
the battery. In this case, remove the battery from the  
camera and set the battery to the charger.  
SD/SDHC/SDDXC caard wrriite-proteect swwitch  
The SD/SDHC/SDXC card body has a write-protect  
switch.  
If you set the switch to the “LOCK” side, you will not be  
able to write to the card, delete data or format. Return the  
switch to enable writing.  
Using your charger and USB-AC  
adapter abroad  
The charger and USB-AC adapter can be used in  
most home electrical sources within the range of 100 V  
to 240 V AC (50/60Hz) around the world. However,  
depending on the country or area you are in, the AC  
wall outlet may be shaped differently and the charger  
and USB-AC adapter may require a plug adapter to  
match the wall outlet. For details, ask at your local  
electrical shop or travel agent.  
LOCK  
Using a new card  
Cards must be formatted with this camera before rst use  
or after being used with other cameras or computers.  
[Memory Format]/[Format] (p. 48)  
Do not use travel voltage converters as they could  
damage your charger and USB-AC adapter.  
Eye-Fi card  
Use commercially available Eye-Fi cards.  
The Eye-Fi card may become hot during use.  
When using an Eye-Fi card, the battery may run out faster.  
When using an Eye-Fi card, the camera may function  
more slowly.  
66  
EN  
Checkiing the image savinng location  
The memory indicator shows whether the internal memory  
or card is being used during shooting and playback.  
Readouut/recorrding process of the card  
During shooting, the current memory indicator lights up  
in red while the camera is writing data. Never open the  
battery/card compartment cover or unplug the USB cable.  
This can not only damage the image data but also render  
the internal memory or card unusable.  
Current memory indicator  
v: Internal memory is being used  
w: Card is being used  
P
Current memory  
indicator  
P
0.0  
WB  
AUTO  
ISO  
0.0  
AUTO  
WB  
00:34  
AUTO  
ISO  
14M  
AUTO  
4
00:34  
14M  
4
4/30  
Lights up in red  
Shooting mode  
’11/02/26 12:30  
Playback mode  
Even if [Memory Format]/[Format], [Erase], [Sel.  
Image], or [All Erase] is performed, the data in the  
card is not completely erased. When disposing of the  
card, damage the card to prevent the disclosure of  
personal data.  
67  
EN  
Number oof storaabble pictures (still images)/Continuous recording length (movies) in thee  
internal memoryy and cards  
The gures in the following tables are quoted only as a rough guideline. The actual number of storable pictures or  
continuous recording lengths will differ according to the shooting conditions and memory cards used.  
The gures in the table below are the number of the storable pictures when using the internal memory formatted.  
[Memory Format]/[Format] (p. 48)  
Still pictures  
Number of storable still pictures  
IMAGE SIZE  
COMPRESSION  
Internal memory  
SD/SDHC/SDXC card (1GB)  
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
7
15  
8
122  
242  
( 4608x3456  
(SZ-20)  
141  
6 4288x3216  
(SZ-10)  
17  
15  
29  
24  
46  
38  
75  
62  
118  
94  
180  
316  
542  
10  
20  
11  
277  
241  
4 3264x2448  
n 2560x1920  
3 2048x1536  
2 1600x1200  
1 1280x960  
7 640x480  
469  
385  
738  
618  
1,211  
992  
1,892  
1,514  
2,884  
5,047  
8,652  
162  
K 4608x2592  
(SZ-20)  
320  
187  
4288x2416  
(SZ-10)  
23  
57  
111  
367  
917  
0 1920x1080  
1,781  
68  
EN  
Movies  
Continuous recording length  
Internal memory SD/SDHC/SDXC card (1GB)  
IMAGE SIZE  
IMAGE QUALITY  
With sound  
Without sound  
25 sec.  
With sound  
Without sound  
T 1920x1080*1  
L
M
L
M
L
M
L
24 sec.  
37 sec.  
7 min. 3 sec.  
7 min. 8 sec.  
(SZ-20)  
37 sec.  
10 min. 32 sec. 10 min. 42 sec.  
10 min. 32 sec. 10 min. 42 sec.  
20 min. 44 sec. 21 min. 24 sec.  
20 min. 44 sec. 21 min. 24 sec.  
40 min. 10 sec. 42 min. 45 sec.  
40 min. 10 sec. 42 min. 45 sec.  
37 sec.  
37 sec.  
L 1280x720*1  
1 min. 12 sec.  
1 min. 12 sec.  
2 min. 21 sec.  
2 min. 21 sec.  
1 min. 15 sec.  
1 min. 15 sec.  
2 min. 30 sec.  
2 min. 30 sec.  
8 640x480  
9 320x240  
*1  
The continuous recording length is up to 29 minutes in the HD quality specied.  
The maximum le size of a single movie is 4 GB, regardless of the capacity of the card.  
Increasinng the number of pictures that can be taken  
Either erase unwanted images, or connect the camera to a computer or other device to save the images, and then erase  
the images in the internal memory or card. [Erase] (p. 24, 46), [Sel. Image] (p. 47), [All Erase] (p. 47),  
[Memory Format]/[Format] (p. 48)  
69  
EN  
Attachments — For your safety, and to avoid damaging the  
product, use only accessories recommended by Olympus.  
Water and Moisture — For precautions on products with  
weatherproof designs, read the weatherproong sections.  
Location To avoid damage to the product, mount the product  
securely on a stable tripod, stand, or bracket.  
SAFETY PRECAUTIONS  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Power Source — Connect this product only to the power  
source described on the product label.  
CAUTION: TO REDUCE THE RISK OF ELECTRICAL  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED OLYMPUS  
SERVICE PERSONNEL.  
Lightning — If a lightning storm occurs while using a USB-AC  
adapter, remove it from the wall outlet immediately.  
Foreign Objects To avoid personal injury, never insert a  
metal object into the product.  
Heat — Never use or store this product near any heat source  
such as a radiator, heat register, stove, or any type of  
equipment or appliance that generates heat, including stereo  
ampliers.  
An exclamation mark enclosed in a  
triangle alerts you to important operating  
and maintenance instructions in the  
documentation provided with the product.  
Handling the Camera  
WARNING  
Do not use the camera near ammable or explosive gases.  
Do not use the ash and LED (including AF illuminator) on  
people (infants, small children, etc.) at close range.  
You must be at least 1 m (3 ft.) away from the faces of your  
subjects. Firing the ash too close to the subject’s eyes could  
cause a momentary loss of vision.  
DANGER  
If the product is used without observing  
the information given under this symbol,  
serious injury or death may result.  
WARNING If the product is used without observing  
the information given under this symbol,  
injury or death may result.  
CAUTION  
If the product is used without observing  
the information given under this symbol,  
minor personal injury, damage to the  
equipment, or loss of valuable data may  
result.  
Keep young children and infants away from the camera.  
Always use and store the camera out of the reach of young  
children and infants to prevent the following dangerous  
situations which could cause serious injury:  
Becoming entangled in the camera strap, causing  
strangulation.  
WARNING!  
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,  
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT  
TO WATER OR OPERATE IN A HIGH HUMIDITY  
ENVIRONMENT.  
Accidentally swallowing the battery, cards or other small  
parts.  
Accidentally ring the ash into their own eyes or those of  
another child.  
Accidentally being injured by the moving parts of the  
camera.  
General Preccautions  
Read All Instructions — Before you use the product, read all  
operating instructions. Save all manuals and documentation  
for future reference.  
Cleaning — Always unplug this product from the wall outlet  
before cleaning. Use only a damp cloth for cleaning. Never  
use any type of liquid or aerosol cleaner, or any type of  
organic solvent to clean this product.  
Do not look at the sun or strong lights with the camera.  
Do not use or store the camera in dusty or humid places.  
Do not cover the ash with a hand while ring.  
Use SD/SDHC/SDXC memory cards or Eye-Fi cards only. Never  
use other types of cards.  
If you accidently insert another type of card into the camera,  
contact an authorized distributor or service center. Do not try to  
remove the card by force.  
70  
EN  
Never store batteries where they will be exposed to direct  
sunlight, or subjected to high temperatures in a hot vehicle,  
near a heat source, etc.  
To prevent causing battery leaks or damaging their terminals,  
carefully follow all instructions regarding the use of batteries.  
Never attempt to disassemble a battery or modify it in any  
way, solder, etc.  
If battery uid gets into your eyes, ush your eyes immediately  
with clear, cold running water and seek medical attention  
immediately.  
Always store batteries out of the reach of small children. If a  
child accidentally swallows a battery, seek medical attention  
immediately.  
CAUTION  
Stop using the camera immediately if you notice any unusual  
odors, noise, or smoke around it.  
Never remove the batteries with bare hands, which may  
cause a re or burn your hands.  
Never hold or operate the camera with wet hands.  
Do not leave the camera in places where it may be subject to  
extremely high temperatures.  
Doing so may cause parts to deteriorate and, in some  
circumstances, cause the camera to catch re. Do not use  
the charger or USB-AC adapter if it is covered (such as a  
blanket). This could cause overheating, resulting in re.  
Handle the camera with care to avoid getting a low-temperature  
burn.  
When the camera contains metal parts, overheating can  
result in a low-temperature burn. Pay attention to the  
following:  
WARNING  
Keep batteries dry at all times.  
To prevent batteries from leaking, overheating, or causing a  
re or explosion, use only batteries recommended for use with  
this product.  
Insert the battery carefully as described in the operating  
instructions.  
When used for a long period, the camera will get hot. If you  
hold on to the camera in this state, a low-temperature burn  
may be caused.  
In places subject to extremely cold temperatures, the  
temperature of the camera’s body may be lower than the  
environmental temperature. If possible, wear gloves when  
handling the camera in cold temperatures.  
Be careful with the strap.  
If rechargeable batteries have not been recharged within the  
specied time, stop charging them and do not use them.  
Do not use a battery if it is cracked or broken.  
If a battery leaks, becomes discolored or deformed, or  
becomes abnormal in any other way during operation, stop  
using the camera.  
If a battery leaks uid onto your clothing or skin, remove the  
clothing and ush the affected area with clean, running cold  
water immediately. If the uid burns your skin, seek medical  
attention immediately.  
Be careful with the strap when you carry the camera. It could  
easily catch on stray objects and cause serious damage.  
Batteryy Handliing Precaautionns  
Never subject batteries to strong shocks or continuous  
vibration.  
Follow these important guidelines to prevent  
batteries from leaking, overheating, burning,  
exploding, or causing electrical shocks or  
burns.  
CAUTION  
Before loading, always inspect the battery carefully for leaks,  
discoloration, warping, or any other abnormality.  
The battery may become hot during prolonged use. To avoid  
minor burns, do not remove it immediately after using the  
camera.  
DANGER  
The camera uses a lithium ion battery specied by Olympus.  
Charge the battery with the specied USB-AC adapter or  
charger. Do not use any other USB-AC adapters or chargers.  
Never heat or incinerate batteries.  
Take precautions when carrying or storing batteries to prevent  
them from coming into contact with any metal objects such as  
jewelry, pins, fasteners, etc.  
Always unload the battery from the camera before storing the  
camera for a long period.  
71  
EN  
Always charge a battery when using it for the rst time, or if it  
has not been used for a long period.  
Caution for Usage Environment  
To protect the high-precision technology contained in this  
product, never leave the camera in the places listed below, no  
matter if in use or storage:  
Places where temperatures and/or humidity are high or go  
through extreme changes. Direct sunlight, beaches, locked  
cars, or near other heat sources (stove, radiator, etc.) or  
humidiers.  
In sandy or dusty environments.  
Near ammable items or explosives.  
In wet places, such as bathrooms or in the rain. When using  
products with weatherproof designs, read their manuals  
as well.  
In places prone to strong vibrations.  
Never drop the camera or subject it to severe shocks or  
vibrations.  
When attaching the camera to or removing it from a tripod,  
rotate the tripod screw, not the camera.  
Before transporting the camera, remove a tripod and all other  
non-OLYMPUS accessories.  
When operating the camera with battery power at low  
temperatures, try to keep the camera and spare battery  
as warm as possible. A battery that has run down at low  
temperatures may be restored after it is warmed at room  
temperature.  
The number of pictures you can take may vary depending on  
the shooting conditions or battery.  
Before going on a long trip, and especially before traveling  
abroad, purchase extra batteries. A recommended battery may  
be difcult to obtain while traveling.  
When storing the battery for a long period, select a cool  
location for storage.  
Please recycle batteries to help save our planet’s resources.  
When you throw away dead batteries, be sure to cover their  
terminals and always observe local laws and regulations.  
LCD Monitor  
Do not push the monitor forcibly; otherwise the image may  
become vague, resulting in a playback mode failure or damage  
to the monitor.  
A strip of light may appear on the top/bottom of the monitor, but  
this is not a malfunction.  
Do not touch electric contacts on cameras.  
Do not leave the camera pointed directly at the sun. This may  
cause lens or shutter curtain damage, color failure, ghosting on  
the image pickup device, or may possibly cause res.  
Do not push or pull severely on the lens.  
When a subject is viewed diagonally in the camera, the  
edges may appear zigzagged on the monitor. This is not a  
malfunction; it will be less noticeable in playback mode.  
In places subject to low temperatures, the LCD monitor may  
take a long time to turn on or its color may change temporarily.  
When using the camera in extremely cold places, it is a good  
idea to occasionally place it in a warm place. An LCD monitor  
exhibiting poor performance due to low temperatures will  
recover in normal temperatures.  
The LCD used for the monitor is made with high-precision  
technology. However, black spots or bright spots of light  
may appear constantly on the LCD Monitor. Due to its  
characteristics or the angle at which you are viewing the  
monitor, the spot may not be uniform in color and brightness.  
This is not a malfunction.  
Before storing the camera for a long period, remove the  
batteries. Select a cool, dry location for storage to prevent  
condensation or mold from forming inside the camera. After  
storage, test the camera by turning it on and pressing the  
shutter button to make sure that it is operating normally.  
The camera may malfunction if it is used in a location where  
it is subject to a magnetic/electromagnetic eld, radio waves,  
or high voltage, such as near a TV set, microwave, video  
game, loud speakers, large monitor unit, TV/radio tower, or  
transmission towers. In such cases, turn the camera off and on  
again before further operation.  
Always observe the operating environment restrictions  
described in the camera’s manual.  
Batteryy Handliing Precaautionns  
Legal and Other Notices  
This camera uses a lithium ion battery specied by Olympus.  
Do not use any other type of battery.  
If the battery’s terminals get wet or greasy, camera contact  
failure may result. Wipe the battery well with a dry cloth  
before use.  
Olympus makes no representations or warranties regarding  
any damages, or benet expected by using this unit lawfully,  
or any request from a third person, which are caused by the  
inappropriate use of this product.  
Olympus makes no representations or warranties regarding  
any damages or any benet expected by using this unit  
lawfully which are caused by erasing picture data.  
72  
EN  
Disclaaimerr oof Warrranty  
FCC Notice  
Olympus makes no representations or warranties, either  
expressed or implied, by or concerning any content of these  
written materials or software, and in no event shall be liable  
for any implied warranty of merchantability or tness for any  
particular purpose or for any consequential, incidental or  
indirect damages (including but not limited to damages for loss  
of business prots, business interruption and loss of business  
information) arising from the use or inability to use these  
written materials or software or equipment. Some countries do  
not allow the exclusion or limitation of liability for consequential  
or incidental damages or of the implied warranty, so the above  
limitations may not apply to you.  
Radio and Television Interference  
Changes or modications not expressly approved by the  
manufacturer may void the user’s authority to operate this  
equipment. This equipment has been tested and found to  
comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a  
residential installation.  
This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications.  
Olympus reserves all rights to this manual.  
However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of  
the following measures:  
Warning  
Unauthorized photographing or use of copyrighted material  
may violate applicable copyright laws. Olympus assumes no  
responsibility for unauthorized photographing, use or other acts  
that infringe upon the rights of copyright owners.  
Adjust or relocate the receiving antenna.  
Increase the distance between the camera and receiver.  
Connect the equipment to an outlet on a circuit different from  
that to which the receiver is connected.  
Copyright Notice  
Consult your dealer or an experienced radio/TV technician  
for help. Only the OLYMPUS-supplied USB cable should  
be used to connect the camera to USB enabled personal  
computers (PC).  
All rights reserved. No part of these written materials or this  
software may be reproduced or used in any form or by any  
means, electronic or mechanical, including photocopying  
and recording or the use of any type of information storage  
and retrieval system, without the prior written permission of  
Olympus. No liability is assumed with respect to the use of the  
information contained in these written materials or software, or  
for damages resulting from the use of the information contained  
therein. Olympus reserves the right to alter the features and  
contents of this publication or software without obligation or  
advance notice.  
Any unauthorized changes or modications to this equipment  
would void the user’s authority to operate it.  
Use Only Dedicated Rechaargeable BBattery,  
Battery CCharger aannd USB-ACC adapter  
We strongly recommend that you use only the genuine Olympus  
dedicated rechargeable battery, battery charger and USB-AC  
adapter with this camera. Using a non-genuine rechargeable  
battery, battery charger and/or USB-AC adapter may result  
in re or personal injury due to leakage, heating, ignition or  
damage to the battery. Olympus does not assume any liability  
for accidents or damage that may result from the use of a  
battery, battery charger and/or USB-AC adapter that are not  
genuine Olympus accessories.  
73  
EN  
Repair, replacement, or adjustment of defective Products shall  
be Olympus’s sole obligation and the customer’s sole remedy  
hereunder.  
The customer is liable and shall pay for shipment of the  
Products to the Olympus Service Center.  
Olympus shall not be obligated to perform preventive  
maintenance, installation, deinstallation, or maintenance.  
Olympus reserves the right to (i) use reconditioned, refurbished,  
and/or serviceable used parts (that meet Olympus’s quality  
assurance standards) for warranty or any other repairs and (ii)  
make any internal or external design and/or feature changes  
on or to its products without any liability to incorporate such  
changes on or to the Products.  
For customers in North and South America  
For customers in USA  
Declaration of Conformity  
Model Number:  
Trade Name:  
SZ-10/SZ-20  
OLYMPUS  
Responsible Party:  
Address:  
3500 Corporate Parkway, P.O. Box 610,  
Center Valley, PA 18034-0610, U.S.A.  
484-896-5000  
Telephone Number:  
Tested To Comply With FCC Standards  
FOR HOME OR OFFICE USE  
WHAT IS NOT COVERED BY THIS LIMITED  
WARRANTY  
Excluded from this limited warranty and not warranted by  
Olympus in any fashion, either express, implied, or by statute,  
are:  
This device complies with Part 15 of the FCC rules. Operation is  
subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received, including  
interference that may cause undesired operation.  
(a) products and accessories not manufactured by Olympus  
and/or not bearing the “OLYMPUS” brand label (the  
warranty coverage for products and accessories of other  
manufacturers, which may be distributed by Olympus, is the  
responsibility of the manufacturers of such products and  
accessories in accordance with the terms and duration of  
such manufacturers’ warranties);  
(b) any Product which has been disassembled, repaired,  
tampered with, altered, changed, or modied by persons  
other than Olympus’s own authorized service personnel  
unless repair by others is made with the written consent of  
Olympus;  
(c) defects or damage to the Products resulting from wear,  
tear, misuse, abuse, negligence, sand, liquids, impact,  
improper storage, nonperformance of scheduled operator  
and maintenance items, battery leakage, use of non-  
“OLYMPUS” brand accessories, consumables, or supplies,  
or use of the Products in combination with non-compatible  
devices;  
For customers in CANADA  
This Class B digital apparatus complies with Canadian ICES-  
003.  
OLYMPUS WORLDWIDE LIMITED WARRANTY  
- IMAGING PRODUCTS  
Olympus warrants that the enclosed Olympus® imaging  
product(s) and related Olympus® accessories (individually  
a “Product” and collectively the “Products”) will be free from  
defects in materials and workmanship under normal use and  
service for a period of one (1) year from the date of purchase.  
If any Product proves to be defective within the one-year  
warranty period, the customer must return the defective Product  
to any of Olympus Service Centers, following the procedure  
set forth below (See “WHAT TO DO WHEN SERVICE IS  
NEEDED”).  
Olympus, at its sole discretion, will repair, replace, or adjust  
the defective Product, provided that Olympus investigation and  
factory inspection disclose that (a) such defect developed under  
normal and proper use and (b) the Product is covered under this  
limited warranty.  
(d) software programs;  
(e) supplies and consumables (including but not limited to  
lamps, ink, paper, lm, prints, negatives, cables and  
batteries); and/or  
(f) Products which do not contain a validly placed and recorded  
Olympus serial number, unless they are a model on which  
Olympus does not place and record serial numbers.  
74  
EN  
EXCEPT FOR THE LIMITED WARRANTY SET FORTH  
ABOVE, OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER  
REPRESENTATIONS, GUARANTIES, CONDITIONS, AND  
WARRANTIES CONCERNING THE PRODUCTS, WHETHER  
DIRECT OR INDIRECT, EXPRESS OR IMPLIED, OR ARISING  
UNDER ANY STATUTE, ORDINANCE, COMMERCIAL USAGE  
OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY  
WARRANTY OR REPRESENTATION AS TO THE SUITABILITY,  
DURABILITY, DESIGN, OPERATION, OR CONDITON OF  
THE PRODUCTS (OR ANY PART THEREOF) OR THE  
MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS  
FOR A PARTICULAR PURPOSE, OR RELATING TO THE  
INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER  
PROPRIETARY RIGHT USED OR INCLUDED THEREIN.  
IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF LAW,  
THEY ARE LIMITED IN DURATION TO THE LENGTH OF THIS  
LIMITED WARRANTY.  
SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR  
LIMITATION OF WARRANTIES AND/OR LIMITATION OF  
LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS  
MAY NOT APPLY.  
THE CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR  
ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM  
STATE TO STATE.  
THE CUSTOMER ACKNOWLEDGES AND AGREES THAT  
OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY  
DAMAGES THAT THE CUSTOMER MAY INCUR FROM  
DELAYED SHIPMENT, PRODUCT FAILURE, PRODUCT  
DESIGN, SELECTION, OR PRODUCTION, IMAGE OR DATA  
LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE,  
WHETHER LIABILITY IS ASSERTED IN CONTRACT, TORT  
(INCLUDING NEGLIGENCE AND STRICT PRODUCT  
LIABILITY) OR OTHERWISE. IN NO EVENT SHALL  
OLYMPUS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,  
CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND  
(INCLUDING WITHOUT LIMITATION LOSS OF PROFITS OR  
LOSS OF USE), WHETHER OR NOT OLYMPUS SHALL BE  
OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH  
POTENTIAL LOSS OR DAMAGE.  
Representations and warranties made by any person, including  
but not limited to dealers, representatives, salespersons, or  
agents of Olympus, which are inconsistent or in conict with  
or in addition to the terms of this limited warranty, shall not be  
binding upon Olympus unless reduced to writing and approved  
by an expressly authorized ofcer of Olympus.  
This limited warranty is the complete and exclusive statement of  
warranty which Olympus agrees to provide with respect to the  
Products and it shall supersede all prior and contemporaneous  
oral or written agreements, understandings, proposals, and  
communications pertaining to the subject matter hereof.  
This limited warranty is exclusively for the benet of the original  
customer and cannot be transferred or assigned.  
WHAT TO DO WHEN SERVICE IS NEEDED  
The customer must transfer any image or other data saved on  
a Product to another image or data storage medium and/or  
remove any lm from the Product prior to sending the Product to  
Olympus for service.  
IN NO EVENT SHALL OLYMPUS BE RESPONSIBLE FOR  
SAVING, KEEPING OR MAINTAINING ANY IMAGE OR DATA  
SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE,  
OR ON ANY FILM CONTAINED WITHIN A PRODUCT  
RECEIVED BY IT FOR SERVICE, NOR SHALL OLYMPUS BE  
RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY  
IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS  
BEING PERFORMED (INCLUDING, WITHOUT LIMITATION,  
DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR  
SPECIAL DAMAGES, LOSS OF PROFITS OR LOSS OF USE),  
WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE  
AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS  
OR IMPAIRMENT.  
Package the Product carefully using ample padding material to  
prevent damage in transit and either deliver it to the Authorized  
Olympus Dealer that sold you the Product or ship it postage  
prepaid and insured to any of our Olympus Service Centers.  
When returning Products for service, your package should  
include the following:  
75  
EN  
1
2
Sales receipt showing date and place of purchase.  
Copy of this limited warranty bearing the Product serial  
number corresponding to the serial number on the  
Product (unless it is a model on which Olympus does not  
place and record serial numbers).  
A detailed description of the problem.  
Sample prints, negatives, digital prints (or les on disk) if  
available and related to the problem.  
Provisions of warranty  
1
If this product proves to be defective, although it has been  
used properly (in accordance with the written Handling  
Care and Operating instructions supplied with it), during the  
applicable national warranty period and has been purchased  
from an authorized Olympus distributor within the business  
area of Olympus Europa Holding GmbH as stipulated on  
repaired, or at Olympus’s option replaced, free of charge.  
To claim under this warranty the customer must take the  
product before the end of the applicable national warranty  
period to the dealer where the product was purchased or any  
other Olympus service station within the business area of  
Olympus Europa Holding GmbH as stipulated on the website:  
World Wide Guarantee the customer may turn the product in  
at any Olympus service station. Please notice that not in all  
countries such Olympus service station exists.  
3
4
When service is completed, the Product will be returned to you  
postage prepaid.  
WHERE TO SEND PRODUCT FOR SERVICE  
See “WORLDWIDE WARRANTY” for the nearest service center.  
INTERNATIONAL WARRANTY SERVICE  
International warranty service is available under this warranty.  
For customers in Europe  
2
The customer shall transport the product to the dealer or  
Olympus authorized service station at his own risk and shall  
be responsible for any costs incurred in transporting the  
product.  
“CE” mark indicates that this product complies  
with the European requirements for safety,  
health, environment and customer protection.  
“CE” mark cameras are intended for sales in  
Europe.  
Provisions of Guarantee  
1
“OLYMPUS IMAGING CORP., Shinjuku Monolith, 2-3-1  
Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan grants a  
one year World Wide Guarantee. This worldwide Guarantee  
must be presented at an Olympus authorized repair service  
station before any repair can be made under conditions  
of this Guarantee. This Guarantee is valid only if the  
Guarantee Certicate and proof of purchase are presented  
at the Olympus repair service station. Please note that this  
Guarantee is in addition to and does not affect the customer’s  
legal warranty rights under the applicable national legislation  
governing the sale of consumer goods mentioned above.  
This Guarantee does not cover the following and the  
customer will be required to pay repair charge, even for  
defects occurring within the Guarantee period referred to  
above.  
This symbol [crossed-out wheeled bin WEEE  
Annex IV] indicates separate collection of waste  
electrical and electronic equipment in the EU  
countries.  
Please do not throw the equipment into the  
domestic refuse.  
Please use the return and collection systems  
available in your country for the disposal of  
this product.  
2
This symbol [crossed-out wheeled bin  
Directive 2006/66/EC Annex II] indicates  
separate collection of waste batteries in the  
EU countries.  
Please do not throw the batteries into the  
domestic refuse. Please use the return and  
collection systems available in your country for  
the disposal of the waste batteries.  
76  
EN  
a. Any defect that occurs due to mishandling (such as an  
operation performed that is not mentioned in the Handling  
Care or other sections of the instructions, etc.)  
b. Any defect that occurs due to repair, modication, cleaning,  
etc. performed by anyone other than Olympus or an  
Olympus authorized service station.  
Notes regarding Guarantee maintenance  
1
This Guarantee will only be valid if the Guarantee Certicate  
is duly completed by Olympus or an authorized dealer or  
other documents contain sufcient proof. Therefore, please  
make sure that your name, the name of the dealer, the  
serial number and the year, month and date of purchase  
are all completed or the original invoice or the sales receipt  
(indicating the dealer’s name, the date of purchase and  
product type) is attached to this Guarantee Certicate.  
Olympus reserves the right to refuse free-of-charge service  
if neither Guarantee Certicate is completed nor the above  
document is attached or if the information contained in it is  
incomplete or illegible.  
c. Any defect or damage that occurs due to transport, a fall,  
shock, etc. after purchase of the product.  
d. Any defect or damage that occurs due to re, earthquake,  
ood damage, thunderbolt, other natural disasters,  
environmental pollution and irregular voltage sources.  
e. Any defect that occurs due to careless or improper  
storage (such as keeping the product under conditions  
of high temperature and humidity, near insect repellents  
such as naphthalene or harmful drugs, etc.), improper  
maintenance, etc.  
2
Since this Guarantee Certicate will not be re-issued, keep it  
in a safe place.  
*
com for the authorized international Olympus service  
network.  
f. Any defect that occurs due to exhausted batteries, etc.  
g. Any defect that occurs due to sand, mud, etc. entering the  
inside of the product casing.  
h. When the Guarantee Certicate is not returned with the  
product.  
For customers in Asia  
i. When any alterations whatsoever are made to the  
Guarantee Certicate regarding the year, month and date  
of purchase, the customer’s name, the dealer’s name, and  
the serial number.  
j. When proof of purchase is not presented with this  
Guarantee Certicate.  
This Guarantee applies to the product only; the Guarantee  
does not apply to any other accessory equipment, such as  
the case, strap, lens cap and batteries.  
Olympus’s sole liability under this Guarantee shall be limited  
to repairing or replacing the product. Any liability under the  
Guarantee for indirect or consequential loss or damage of  
any kind incurred or suffered by the customer due to a defect  
of the product, and in particular any loss or damage caused  
to any lenses, lms, other equipment or accessories used  
with the product or for any loss resulting from a delay in repair  
or loss of data, is excluded. Compelling regulations by law  
remain unaffected by this.  
Provisions of warranty  
1
lf this product proves to be defective, although it has been  
used properly (in accordance with the written Handling Care  
and Operating instructions supplied with it), during a period  
of up to one year from the date of purchase this product  
will be repaired, or at Olympus’s option replaced, free of  
charge. To claim under warranty the customer must take the  
product and this Warranty certicate before the end of the  
one year warranty period to the dealer where the product was  
purchased or any Olympus authorized service station listed in  
the instructions and request the necessary repairs.  
The customer shall transport the product to the dealer or  
Olympus authorized service station at his own risk and shall  
be responsible for any costs incurred in transporting the  
product.  
3
4
2
3
This warranty does not cover the following and the customer  
will be required to pay repair charge, even for defects  
occurring within the one year period referred to above.  
77  
EN  
a. Any defect that occurs due to mishandling (such as an  
operation performed that is not mentioned in the Handling  
Care or other sections of the instructions, etc.)  
b. Any defect that occurs due to repair, modication, cleaning,  
etc. performed by anyone other than Olympus or an  
Olympus authorized service station.  
Notes;  
1
This Warranty is in addition to and does not affect the  
customer’s statutory right.  
2
lf you have any queries regarding this Warranty, call any  
of the Olympus authorized service stations listed in the  
instructions.  
c. Any defect or damage that occurs due to transport, a fall,  
shock, etc. after purchase of the product.  
Notes regarding warranty maintenance  
1
This Warranty will only be valid if the Warranty Certicate is  
duly completed by Olympus or the dealer. Make sure that  
your name, the name of the dealer, the serial number and the  
year, month and date of purchase are all completed.  
Since this Warranty Certicate will not be re-issued, keep it in  
a safe place.  
Any request for repair by a customer in same country where  
the product was purchased shall be subject to the terms  
of the warranty issued by the Olympus distributor in that  
country. Where the local Olympus distributor does not issue a  
separate warranty or where the customer is not in the country  
where the product was purchased the terms of this worldwide  
warranty shall apply.  
d. Any defect or damage that occurs due to re, earthquake,  
ood damage, thunderbolt, other natural disasters,  
environmental pollution and irregular voltage sources.  
e. Any defect that occurs due to careless or improper  
storage (such as keeping the product under conditions  
of high temperature and humidity, near insect repellents  
such as naphthalene or harmful drugs, etc.), improper  
maintenance, etc.  
f. Any defect that occurs due to exhausted batteries, etc.  
g. Any defect that occurs due to sand, mud, etc. entering the  
inside of the product casing.  
h. When this Warranty Certicate is not returned with the  
product.  
i. When any alterations whatsoever are made to the  
Warranty Certicate regarding the year, month and date of  
purchase, the customer’s name, the dealer’s name, and  
the serial number.  
j. When proof of purchase is not presented with this  
Warranty Certicate.  
2
3
4
Where applicable, this Warranty is valid worldwide. The  
Olympus authorized service stations listed in this Warranty  
will gladly honor it.  
*
Please refer to the appended list for the authorized  
international Olympus service network.  
Disclaimer of Warranty  
Olympus makes no representations or warranties, either  
expressed or implied, by or concerning any content if these  
written materials or software, and in no event shall be liable  
for any implied warranty of merchantability or tness for any  
particular purpose or for any consequential, incidental or  
indirect damages (including but not limited to damages for loss  
of business prots, business interruption and loss of business  
information) arising from the use of inability to use these written  
materials or software. Some states do not allow the exclusion or  
limitation of liability for consequential or incidental damages, so  
the above limitations may not apply to you.  
4
5
This Warranty applies to the product only; the Warranty does  
not apply to any other accessory equipment, such as the  
case, strap, lens cap and batteries.  
Olympus’ sole liability under this warranty shall be limited to  
repairing or replacing the product and any liability for indirect  
or consequential loss or damage of any kind incurred or  
suffered by the customer due to a defect in the product, and  
in particular any loss or damage caused to any lm or lenses  
or other equipment or accessories used with the product or  
for any loss resulting from delay in repair, is excluded.  
78  
EN  
Trademarks  
IBM is a registered trademark of International Business  
Machines Corporation.  
Microsoft and Windows are registered trademarks of Microsoft  
Corporation.  
Macintosh is a trademark of Apple Inc.  
The SDHC/SDXC logo is a trademark.  
Eye-Fi is a registered trademark of Eye-Fi, Inc.  
All other company and product names are registered  
trademarks and/or trademarks of their respective owners.  
The standards for camera le systems referred to in this  
manual are the “Design rule for Camera File system/DCF”  
standards stipulated by the Japan Electronics and Information  
Technology Industries Association (JEITA).  
THIS PRODUCT IS LICENSED UNDER THE AVC  
PATENT PORTFOLIO LICENSE FOR THE PERSONAL  
AND NONCOMMERCIAL USE OF A CONSUMER TO  
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC  
STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE  
AVC VIDEO THAT WAS ENCODED BY A CONSUMER  
ENGAGED IN A PERSONAL AND NON-COMMERCIAL  
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO  
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO  
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR  
ANY OTHER USE. ADDITIONAL INFORMATION MAY BE  
OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.  
MPEGLA.COM  
The software in this camera may include third party  
software. Any third party software is subject to the  
terms and conditions, imposed by the owners or  
licensors of that software, under which software is  
provided to you.  
Those terms and other third party software notices,  
if any, may be found in the software notice PDF le  
stored within the accompanying CD-ROM or at  
digicamera/download/notice/notice.cfm  
Powered by ARCSOFT.  
79  
EN  
SPECIFICATIONS  
Camera  
Model No.  
SZ-10  
SZ-20  
Product type  
Recording system  
Still pictures  
:
Digital camera (for shooting and displaying)  
:
:
Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF))  
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge  
Applicable  
standards  
3D still image  
:
:
MP format  
Sound with still  
pictures  
Wave format  
Movie  
:
:
MPEG-4AVC./H.264  
Memory  
Internal memory  
SD/SDHC/SDXC/Eye-Fi card  
No. of effective pixels  
Image pickup device  
Lens  
:
:
:
14,000,000 pixels  
16,000,000 pixels  
1/2.33” CCD (primary color lter)  
1/2.3” CMOS (primary color lter)  
Olympus lens 5.0 to 90 mm,  
f3.1 to 4.4  
Olympus lens 4.2 to 52.5 mm,  
f3.0 to 5.9  
On 35 mm lm  
Photometric system  
Shutter speed  
:
:
:
Equivalent to 28 to 504 mm  
Equivalent to 24 to 300 mm  
Digital ESP metering, spot metering system  
4 to 1/2000 sec.  
4 to 1/2000 sec.  
Shooting range  
Normal  
:
:
:
0.1 m (0.3 ft.) to (W),  
1.6 m (5.2 ft.) to (T)  
0.1 m (0.3 ft.) to (W),  
0.9 m (3.0 ft.) to (T)  
Macro mode  
0.1 m (0.3 ft.) to (W),  
1.6 m (5.2 ft.) to (T)  
0.1 m (0.3 ft.) to (W),  
0.9 m (3.0 ft.) to (T)  
Super macro  
mode  
0.01 m (0.03 ft.) to (W only)  
Monitor  
:
:
3.0” TFT color LCD display, 460,000 dots  
Connector  
DC-IN jack, USB connector, A/V OUT jack (Multi-connector)/  
HDMI micro connector (type D)  
Automatic calendar  
system  
:
2000 up to 2099  
80  
EN  
Model No.  
SZ-10  
SZ-20  
Operating environment  
Temperature  
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/  
-20 °C to 60 °C (-4 °F to 140 °F) (storage)  
Humidity  
:
:
:
30 % to 90 % (operation)/10 % to 90 % (storage)  
Power supply  
One Olympus lithium ion battery (LI-50B) or separately sold AC adapter  
Dimensions Width x  
Height x Depth  
105.9 mm x 67.3 mm x 37.9 mm  
(4.2 x 2.6 x 1.5 in.)  
102.4 mm x 64.0 mm x 30.4 mm  
(4.0 x 2.5 x 1.2 in.)  
(excluding protrusions)  
Weight  
:
215 g (7.6 oz.) (including battery and card) 186 g (6.6 oz.) (including battery and card)  
Lithium ion battery (LI-50B)  
Product type  
Model No.  
:
:
:
:
:
Lithium ion rechargeable battery  
LI-50BA/LI-50BB  
Standard voltage  
Standard capacity  
Battery life  
DC 3.7 V  
925 mAh  
Approx. 300 full charges (varies on usage)  
Operating environment  
Temperature  
Dimensions  
:
:
:
0 °C to 40 °C (32 °F to 104 °F) (charging)  
34.4 mm (W) x 40.0 mm (H) x 7.0 mm (D) (1.4 x 1.6 x 0.3 in.)  
Approx. 20 g (0.7 oz)  
Weight  
81  
EN  
USB-ACC adaptter (F--2AC)  
Model No.  
:
:
:
F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B  
AC 100 to 240 V (50/60 Hz)  
DC 5 V, 500 mA  
Power requirements  
Output  
Operating environment  
Temperature  
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/  
-20 °C to 60 °C (-4 °F to 140 °F) (storage)  
Dimensions  
Weight  
:
:
50.0 mm (W) X 54.0 mm (H) X 22.0 mm (D) (2.0 X 2.1 X 0.9 in.)  
Approx. 46.0 g (1.6 oz) (F-2AC-1A)/Approx. 42.0 g (1.5 oz) (F-2AC-2A)/  
Approx. 44.0 g (1.6 oz) (F-2AC-1B)/Approx. 40.0 g (1.4 oz) (F-2AC-2B)  
Design and specications subject to change without notice.  
HDMI, the HDMI Logo and High-Denition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI Licensing LLC.  
82  
EN  
VR136501  

Rockford Fosgate FNX2405 User Manual
RCA EZ3000R User Manual
Radio Shack 350 User Manual
QSC Audio Car Speaker AD CI52ST User Manual
PYLE Audio View Series PLDMN65 User Manual
PB Heat WBV Series User Manual
Motorola STB DCX3200 User Manual
JVC TK C750 User Manual
JVC Marine Case WR MG100 User Manual
JVC KS U100K User Manual