Basic guide
Quick task index
DIGITAL CAMERA
Table of Contents
Basic photography and useful
functions
1.
2.
3.
4.
5.
6.
7.
Other shooting options and
advanced settings
Instruction Manual
Flash shooting
Shooting and viewing movies
Playback options
Camera setup
Customizing camera settings
8.
9.
Printing pictures
Connecting the camera to a
computer
10
.
Shooting tips and maintenance
Information
11.
Thank you for purchasing an Olympus digital camera. Before you start to use your new
camera, please read these instructions carefully to enjoy optimum performance and a
longer service life. Keep this manual in a safe place for future reference.
We recommend that you take test shots to get accustomed to your camera before taking
important photographs.
The screen and camera illustrations shown in this manual were produced during the
development stages and may differ from the actual product.
The contents in this manual are based on firmware version 1.0 for this camera. If there
are additions and/or modifications of functions due to firmware update for the camera, the
contents will differ. For the latest information, please visit the Olympus website.
Charging and inserting the battery
1 Charging the battery.
Charging indicator
Direction indicating mark
BLS-1 Lithium ion battery
3
charging indicator
Amber light: Charging in
progress
Blue light: Charging complete
1
AC wall outlet
(Charging time: Up to
approximately 3 hours 30
minutes)
BCS-1 Lithium
ion charger
2
AC cable
Amber blinking: Charging error
2 Loading the battery.
Battery/card
compartment cover
Direction indicating mark
2
3
1
Battery/card
compartment lock
Removing the battery
Turn off the camera before
opening or closing the battery/card
compartment cover.
To remove the battery, first push the
battery lock knob in the direction of
the arrow and then remove.
$ Notes
• It is recommended to set aside a backup battery for prolonged shooting in case the
battery in use drains.
EN 3
Inserting and removing cards
1 Loading the card.
•
Insert the SD/SDHC card
(referred to as “card” in these
instructions) until it locks in
place.
g“Card basics” (P. 95)
# Caution
•
Turn off the camera before
loading or removing the card.
Removing the card
Press the inserted card lightly and it
will be ejected. Pull out the card.
# Caution
• Do not remove the battery or
card while the card write indicator
(P. 22) is displayed.
2 Closing the battery/card compartment cover.
•
Close the cover until you
hear a click.
# Caution
• Close the battery/card compartment cover when using the camera.
• Do not remove the battery or card while the card write indicator (P. 22) is displayed.
Failure to observe this precaution could result in the loss not only of the images
being recorded but also of existing images.
4
EN
Attaching a lens to the camera
1 Remove the body cap from the camera and the rear cap from
the lens.
1
2
1
2
2 Attach a lens to the
camera.
Lens attachment
mark
•
Align the lens attachment
mark (red) on the camera with
the alignment mark (red) on
the lens, then insert the lens
into the camera's body.
Alignment mark
•
Rotate the lens in the direction indicated by the
arrow until you hear it click.
# Caution
•
•
•
Make sure the camera is turned off.
Do not press the lens release button.
Do not touch internal portions of the camera.
3 Remove the lens cap.
1
1
2
Lens release button
Removing the lens from the camera
While pressing the lens release button, rotate the lens in
the direction of the arrow.
g “Interchangeable lenses” (P. 97)
2
1
EN 5
Power on
1 Press the ON/OFF button to turn on the camera.
•
When the camera is turned on, the (blue) power lamp will light and the monitor
will turn on.
•
To turn off the power, press the ON/OFF button again.
h
2 Set the mode dial to
.
■ Mode dial
■ ON/OFF button
• The (blue) power lamp lights
when the camera is turned on.
Dust reduction function
After you turn the camera on, the
camera will remove dust from the
filter in front of the image pickup
device.
■ LCD monitor
• When you turn on the power,
the LCD monitor lights up.
Battery level
7 (green): Camera ready to shoot
8 (green): Low battery
9 (blinks red): Charge the battery
6
EN
Setting the date/time
Date and time information is recorded on the card together with the images. The
file name is also included with the date and time information. Be sure to set the
correct date and time before using the camera.
1 Display the menus.
•
Press the MENU button to display the menus.
CARD SETUP
CUSTOM RESET
PICTURE MODE
K
j
MENU button
IMAGE ASPECT
4:3
BACK
SET
-- :
.----
’ -- -.-
X
W
s
2 Select [X] in the [d] (setup) tab.
ENG.
•
Use FG to select [d] and press I.
j±0
k±0
REC VIEW
5SEC
[d] tab
c
MENU DISPLAY OFF
FIRMWARE
BACK
SET
X
3 Set the date and time.
•
•
•
Use HI to select items.
Y
M
D
TIME
Use FG to change the selected item.
Use FG to select the date format.
Y/M/D
2010
CANCEL
The time is displayed
using a 24-hour clock.
4 Save settings and exit.
•
•
Press i to set the camera clock and exit to the main menu.
Press the MENU button to exit the menus.
EN 7
Names of parts and functions
Camera
8
9
1
2
3
0
4
4
5
6
7
a
b
g
h
f
c
d
e
1 Mode dial................................P. 6, 10
2 Shutter button ................ P. 11, 12, 46
3 ON/OFF button.............................P. 6
4 Strap eyelet..................................P. 2
5 Self-timer lamp...........................P. 30
6 Lens attachment mark .................P. 5
0 Built-in flash................................P. 54
a Lens release button .....................P. 5
b Lens lock pin
c Tripod socket
d Battery/card compartment cover
.....................................................P. 3
e Battery/card compartment lock ....P. 3
f Connector cover
7 Mount (Remove the body cap before
attaching the lens.)
8 Microphone ..........................P. 57, 65
9 Hot shoe cover
g Multi-connector...............P. 67, 84, 87
h HDMI mini-connector (type C)....P. 67
8
EN
8
9
0
1
2
a
b
3
4567
c
F(Up)/F(Exposure compensation) button
(P. 40)
H (Left)/
P(AF target)
button (P. 45)
I (Right)/
#(Flash)
button (P. 54)
i button
(P. 21)
G(Down)/jY(Sequential
shooting/Self-timer) button
(P. 30)
1 Flash switch ...............................P. 54
2 Accessory port
8 Hot shoe...................................P. 100
9 </Gbutton ..............P. 80/P. 59, 60
0 Ubutton........................P. 59, 60, 62
a R (Movie) /0(Protect) button
........................ P. 11, 13, 56/P. 59, 65
b Speaker
3 LCD monitor.........................P. 22, 23
4 q(Playback) button...........P. 14, 59
5 MENU button............................P. 21
6 INFO (Information display)
button.............................P. 22, 33, 61
7 D (Erase) button............P. 15, 59, 66
c Arrow pad
EN 9
Names of parts and functions
Mode dial
Use the mode dial to select the shooting mode. After choosing the shooting
mode, use the shutter button to take photographs and the R (movie) button to
shoot movies.
■ Advanced shooting modes
Indicator
Mode icon
Program shooting (P. 36)
P
Aperture priority shooting
(P. 37)
A
Shutter priority shooting
(P. 38)
S
Manual shooting (P. 39)
M
• For more advanced shooting and
greater creative control, you can
set the aperture value and shutter
speed.
• The settings made in the
advanced shooting modes are
retained even if the camera is
turned off.
Photo zone
■ Movie mode
Movie zone
Movie (P. 56)
n
■ Easy shooting modes
• Select according to the shooting scene.
The camera sets the appropriate shooting
conditions automatically.
A
ART
SCN
iAUTO (P. 6)
Art filter (P. 16)
Scene (P. 17)
• When rotating the mode dial or turning off
the power in the easy shooting modes,
functions with changes made to their
settings are restored to the factory default
settings.
% Tips
• Resetting camera settings: g “Resetting the camera settings” (P. 70)
10 EN
Shutter button
R (movie) button
Mode
Photos: shutter button
Movies: R (movie) button
• Aperture and shutter speed
are automatically adjusted for
optimal results.
• You control aperture.
• You control shutter speed.
P
A
S
• You control aperture and shutter • The camera adjusts aperture and
M
speed.
shutter speed automatically.
• A full auto mode in which the
camera automatically optimizes
settings for the current scene.
• Select an art filter.
A
ART
SCN
• Select a scene.
• Photographs are recorded at the • Shoot movies using art filter or
settings selected for movies. aperture and shutter speed effects.
n
• To take a photograph during movie recording, press the shutter button. Three files
will be recorded to the memory card: the movie footage preceding the photograph,
the photograph itself, and the movie footage following the photograph. Press the R
(movie) button to end recording.
• Only one photograph can be taken at a time during movie recording; the self-timer
and flash can not be used.
• Pressing the R (movie) button during sequential shooting ends shooting. A movie
is not recorded.
• Image size and quality for photographs are independent of movie frame size.
• The autofocus and metering used in movie mode may differ from that used to take
photographs.
• Pressing the R (movie) button during any of the following will end shooting without
recording a movie:
Sequential shooting/PANORAMA/multiple exposure/bracketing, etc
• The R (movie) button can not be used to record movies in the following instances:
BULB/shutter button pressed halfway/playback zoom/PANORAMA, etc
EN 11
Taking photographs/shooting movies
1 Frame the shot.
•
Keep your fingers and
the strap away from the
lens.
Horizontal grip
Vertical grip
Using lenses with an UNLOCK switch
1
Retractable lenses with an UNLOCK switch can
not be used while retracted.
4
3
Turn the zoom ring in the direction of arrow ( ) to
1
extend the lens ( ).
2
To store, turn the zoom ring in the direction of
arrow ( ) while sliding the UNLOCK switch ( ).
4
3
2
2 Adjust the focus.
•
Lightly press the shutter button down to
the first position (press the shutter button
halfway).
AF target
AF confirmation mark
ISO-A
200
Press the shutter
button halfway.
L
N
G
250 F5.6
38
Shutter speed Aperture value
•
•
Focus will lock, the AF confirmation mark ((or n) will light, and an AF target
will be briefly displayed to show the focus position.
Lenses that supports Hi-Speed Imager AF*
Lenses with other Four Thirds mounts
(
n
*
Visit our website for more information.
The shutter speed and aperture value that have been set automatically by the
camera are displayed.
12 EN
Pressing the shutter button halfway and all the way down
The shutter button has two positions. The act of lightly pressing the shutter button to
the first position and holding it there is called “pressing the shutter button halfway,”
that of pressing it all the way down to the second position “pressing the shutter
button all (or the rest of) the way down.”
Press the rest of
the way down
Press halfway
3
Release the shutter.
Taking photographs
Press the rest of
the way down
Press halfway
Press the shutter button all the way (fully).
•
The shutter sounds and the picture is
taken.
Recording movies
Press the R (movie) button to begin recording.
Press the R (movie) button again to end recording.
R (movie) button
n
2:18
% Tips
• If no operations are performed for about 8 seconds, the monitor will dim.
If no operations are performed for approximately another minute, the camera will
enter “sleep” (stand-by) mode and all operations will be suspended. The camera
activates again when you touch any button (the shutter button, qbutton, etc.).
• If no operations are performed for about 5 minutes after the camera enters sleep
mode, the camera will turn off automatically. g“SLEEP” (P. 74)
# Caution
• Bright light sources appear black when framed in the monitor but are recorded
normally in the final picture.
•
If the camera is used for extended periods, the temperature of the image pickup
device will rise and noise and colored fog may appear in images recorded at high ISO
sensitivities. Choose a lower ISO sensitivity or turn the camera off for a short period.
EN 13
Playback/Erasing
Single-frame playback
Press the qbutton to display your most recent photograph or movie.
qbutton
Arrow pad
H: Displays
the previous
frame
I: Displays
the next
frame
P
HD
[4032x3024,1/8]
2010.02.01 12:30
100-0004
L
N
100-0015
4
2010.02.01 12:30
15
Movie
Still image
„ Close-up playback
• To zoom in on the image currently displayed in single-
frame playback, press the Ubutton. Keep pressing
the button to zoom in up to 14×. Press Gto return to
single-frame playback.
2x
„ Index display
• To view multiple pictures, press the Gbutton.
• Press the Ubutton to view the currently selected
picture full frame.
2010.02.01 12:30
21
14 EN
Movie playback
Display a movie in single-frame playback and press i to display the playback
menu. Select [MOVIE PLAY] and press i to begin playback.
• To interrupt movie playback, press MENU.
MOVIE
MOVIE PLAY
m
BACK
SET
Erasing images
Display a image you want to delete and press D. Select [YES] and press i.
ERASE
YES
NO
SET
D button
BACK
EN 15
Using art filters
1 Rotate the mode dial to ART.
•
A menu of art filters will be displayed.
Select a filter using FG.
1 POP ART
i
ISO
AUTO
L
N
SELECT
SET
250 F5.6
38
•
Press i or press the shutter button halfway to display the view through the
lens in the monitor. Press i to return to the art filter menu.
2 Shoot.
„ Types of art filters
j
k
l
POP ART
SOFT FOCUS
GRAINY FILM
m
n
o
PIN HOLE
DIORAMA
GENTLE SEPIA
# Caution
• Art filters are not applied to RAW images.
•
•
If RAW is selected for the record mode when the camera enters art filter mode, the
record mode will automatically be set to N+RAW.
Y
The grainy appearance of the picture may be emphasized depending on the type of
art filter.
% Tips
• Camera settings can be adjusted using the menus (P. 21) and buttons (P. 9).
• You can also configure the camera so that the live control (P. 20) and super control
K
panel (P. 81) can be used. g“ CONTROL SETTING” (P. 74)
16 EN
Shooting in scene mode
1 Rotate the mode dial to SCN.
•
A menu of scene menu will be displayed.
Select a scene using FG.
1 PORTRAIT
B
e
i
F
D
C
G
ISO
AUTO
L
N
SELECT
SET
250 F5.6
38
•
Press i or press the shutter button halfway to display the view through the
lens in the monitor. Press i to return to the scene menu.
2 Shoot.
„ Types of scene modes
PORTRAIT
DIS MODE
I
e
L
K
J
G
q
J
e-PORTRAIT
LANDSCAPE
LANDSCAPE+PORTRAIT
SPORT
NIGHT SCENE
NIGHT+PORTRAIT
CHILDREN
MACRO
NATURE MACRO
CANDLE
r
&
*
@
s
(
g
SUNSET
DOCUMENTS
PANORAMA (P. 35)
FIREWORKS
BEACH & SNOW
U
G
H
I
HIGH KEY
LOW KEY
# Caution
•
[e-PORTRAIT] can not be applied to RAW images.
•
When RAW or RAW+JPEG photos are taken using [e-PORTRAIT], two images will be
recorded: a RAW image and an X-quality (2560×1920) JPEG to which effects have
been applied.
•
When JPEG is set in [e-PORTRAIT], two images are saved, one from before
application of the effect (with set picture quality) and the other from after application of
the effect (X(2560×1920)).
EN 17
Using the iAUTO mode live guides
Although iAUTO (A) mode is a full auto mode, a “live guide” is available to
guide you through creative adjustments to settings controlling such elements
as vividness, hue, brightness, focus, and motion using simple operations and
easy-to-understand instructions displayed over the view through the lens in the
monitor.
Guide item
Level bar/selection
CLEAR & VIVID
CHANGE COLOR SATURATION
i
FLAT & MUTED
CANCEL
Guide item
Level bar/selection
Affects*2
CHANGE COLOR
SATURATION*1
CLEAR &
VIVID
FLAT &
MUTED
Saturation, contrast,
gradation, etc.
CHANGE COLOR
IMAGE*1
Color temperature,
gradation, etc.
WARM
COOL
DARK
SHARP
Exposure
compensation,
gradation, etc.
CHANGE
BRIGHT
BLUR
BRIGHTNESS*1
Aperture, live
preview, etc.
BLUR BACKGROUND*1
EXPRESS MOTIONS*1
Shutter speed
(1/2s–fastest speed),
frame rate, etc.
BLURRED
MOTION
STOP
MOTION
•
•
•
•
•
TIPS FOR CHILD PHOTO
TIPS FOR PET PHOTO
TIPS FOR FLOWER PHOTO
TIPS FOR CUISINE PHOTO
TIPS FOR FRAMING
SHOOTING TIPS
—
*1 Monitor frame rate slows.
*2 For reference only. The items listed do not correspond directly to parameters that
can be adjusted in other shooting modes.
18 EN
1 After pressing i to display the live guide, use the FG buttons
on the arrow pad to highlight an item and press i to select.
Guide item
CHANGE COLOR SATURATION
2 Position the cursor using the FG buttons on the arrow pad and
check the effect or read the description.
•
•
Press the shutter button halfway to select.
Although the camera exits from preview to live view when
[BLUR BACKGROUND] or [EXPRESS MOTIONS] is selected, the selected
effect still applies.
Level bar
CLEAR
&
VIVID
FLAT
&
MUTED
CANCEL
3 Shoot.
•
•
Press the shutter button to shoot.
To clear the live guide from the display, press the MENU button.
# Caution
•
•
•
•
•
•
•
Selecting RAW in the live guide sets the record mode to YN+RAW.
Live guide settings are not applied to the RAW copy.
Pictures may appear grainy at some live guide setting levels.
Changes to live guide setting levels may not be visible in the monitor.
The flash can not be used with the live guide.
Changes to live guide options cancel previous changes.
Choosing live guide settings that exceed the limits of the camera exposure meters
may result in pictures that are over- or under-exposed.
EN 19
Using live control
Using live control allows you to preview the effects of different settings in the
monitor.
j
WB
AUTO
Functions
IS OFF
L F
WB AUTO
Settings
2
w
P
AUTO
5
3 1
„ Settings that can be modified using live control
Picture mode*1 .................................P. 52
Scene mode*2 ..................................P. 17
Art filter mode*2 ................................P. 16
nmode*3 ........................................P. 56
White balance..................................P. 41
Sequential shooting/self-timer.........P. 30
Image stabilizer ...............................P. 50
Aspect ratio*1*2..................................P. 32
Record mode...................................P. 31
Flash mode*1*2..................................P. 54
Flash intensity control*1*2..................P. 55
Metering mode*1*2.............................P. 47
AF mode..........................................P. 44
Face detection*1*2 .............................P. 32
Movie sound record*3 .......................P. 57
ISO sensitivity..................................P. 41
*1 P, A, S, Mand Amodes only.
*2 ART and SCN only.
*3 nmode only.
1 Press i to display the live control.
•
To hide the live control, press i again.
Cursor
Displays
the selected
function name
2 Use the FGbuttons on
the arrow pad to select
settings, use HI to
j
WB
AUTO
Arrow
pad
change the selected
IS OFF
setting, and press i.
L F
WB AUTO
•
The selected settings take effect
automatically if no operations are
performed for about 8 seconds.
Cursor
2
P
AUTO
5
3 1 w
Arrow pad
# Caution
• Some items are not available in some shooting modes.
% Tips
K
• For information on displaying or hiding the live control: g“ CONTROL
SETTING” (P. 74)
20 EN
Using the menus
CARD SETUP
CUSTOM RESET
PICTURE MODE
K
1 Press the MENU button to display the
menus.
j
Tab
IMAGE ASPECT
4:3
Operation
guide
BACK
SET
Press the MENU
button to go back
one screen
Press the i
button to confirm
the setting
i
2 Use FG to select a tab and press
.
i
3 Select an item using FG and press
to display options for
the selected item.
Function
The current setting is displayed
j Y
/
j Y
/
o
j Y
/
o
IMAGE STABILIZER OFF
BRACKETING
IMAGE S
j
BRACKE
i
W
MULTIPLE EXPOSURE OFF
MULTIPLE
w
w
Y
0.0
#RC MODE
OFF
#RC MO
BACK
SET
BACK
SET
4 Press the i button to confirm the setting.
•
Press the MENU button repeatedly to exit the menu.
$ Notes
• For details on the functions that can be set with the menu, refer to “Menu directory”
(P. 106).
% Tips
• Camera settings can be customized to your shooting style: g“Customizing
camera settings” (P. 71)
The settings on the Custom Menu are for customizing the camera to suit your
personal preferences or needs. They are not suited to frequent changing. The
initial menu is more than adequate for setting both simple and advanced shooting
functions. Normally, there is no need to display the Custom Menu.
EN 21
Information displayed in the monitor
Shooting
You can switch the monitor display using the INFO button.
g“Switching the information display” (P. 33)
1
2
3 4 5 6 7 89
FP RC HP BKT
u
0
a
s
r
q
p
b
c
d
e
S-AF
S-AF
2
IS
:
ISO
400
ISO
400
4 3
o
n
m
l
+2.0
+2.0
L
N
f
AEL
t
0
g
P
P
25
250 F5.6 +2.0
1023
k
j
i
h
1 Card write indicator......................P. 4
e Aspect ratio................................P. 32
2 Internal temperature warning
f Record mode..............................P. 31
m ......................................P. 92
g Number of storable still pictures
.................................................P. 105
Available recording time
3 Super FP flash s...................P. 103
4 RC mode..................................P. 103
5 Home position p......................P. 45
6 Auto bracket t.......................P. 48
7 Multiple exposure i.................P. 51
8 Flash ..........................................P. 54
(blinks: charging in progress,
lights up: charging completed)
9 Battery check
h Top:
Flash intensity
control ..........................P. 55
Bottom: Exposure compensation
indicator........................P. 40
i Exposure compensation value...P. 40
j Aperture value.....................P. 36–39
k Shutter speed......................P. 36–39
l Shooting mode..............P. 10, 36–39
m AE Lock u..............................P. 47
n Flash intensity control ................P. 55
o ISO sensitivity ............................P. 41
p Face detection g ................P. 32, 74
q AF mode.....................................P. 44
r Metering mode...........................P. 47
s Flash mode ................................P. 54
t My Mode ....................................P. 73
u Picture mode..............................P. 52
7 Lit up (green) (ready for use)
8 Lit up (green) (Battery is
running low)
9 Blinks (red) (charging required)
0 AF confirmation mark...........P. 12, 46
a Art filter.......................................P. 16
Scene mode...............................P. 17
Picture mode..............................P. 52
b White balance ............................P. 41
c Sequential shooting/self-timer....P. 30
d Image stabilizer vws.......P. 50
22 EN
Playback
You can switch the monitor display using the INFO button.
g “Information display” (P. 61)
Simplified display
Overall display
1
2
3
4 5
b
c
d
e
x
x
10
10
2.0
f
250 F5.6
45mm
g
h
i
+
±
0.0
ISO 100
0 G
NATURAL
WBAUTO
A
±
±
0
j
k
8
9
0
a
[
]
4032x3024,1/8
:
:
4 3
4 3
L
L
N
N
100-0015
15
100-0015
15
2010.02.01 12:30
6
o
n
m
l
7
1 Aspect border.............................P. 32
2 Print reservation
d Exposure compensation ............P. 40
e Shutter speed......................P. 36–39
f Aperture value.....................P. 36–39
Number of prints.........................P. 82
3 Sound record .............................P. 65
4 Protect........................................P. 65
5 Battery check ...............................P. 6
6 Date and time...............................P. 7
7 Aspect ratio..........................P. 32, 63
8 Pixel count, compression rate....P. 31
9 Record mode..............................P. 31
0 File number................................P. 82
a Frame number............................P. 82
b AF target ....................................P. 45
c Shooting mode..............P. 10, 36–39
g Focal length ...............................P. 97
(The focal length is displayed in 1 mm
units.)
h Flash intensity control ................P. 55
i ISO sensitivity ............................P. 41
j White balance compensation.....P. 42
k Picture mode..............................P. 52
l Color space................................P. 76
m White balance ............................P. 41
n Metering mode...........................P. 47
o Histogram...................................P. 33
EN 23
Quick task index
Use this index to quickly find the page describing the task you want to perform or
the function you want to know more about.
Shooting
g
Taking pictures with automatic
settings
iAUTO (A)
Art filter (ART)
Scene (SCN)
11
Easy photography with special
effects
16
17
Easy photography suited to the
scene
Focus lock
46
45
Focus
AF target
AF target
45
Focusing on one area
MF (manual focus)
Multi view display
Preview function
TEST PICTURE
44
33, 40
37
Checking set effect before taking
a picture
80
Extending the useful life of the
battery
SLEEP
74
31
41
Increasing the number of pictures
that can be taken
Record mode
ISO
Taking pictures in low light
situations without using the flash
Histogram
33
40
63
52
16
54
53
18
37
18
Taking pictures without white
subjects appearing too white or
black subjects appearing too dark
Exposure compensation
SHADOW ADJ
PICTURE MODE
Art filter (ART)
Flash shooting
GRADATION
Taking monotone pictures
Taking pictures of a subject
against backlight
Live guide
Taking pictures with a blurred
background
Aperture priority shooting
Live guide
Taking pictures that stop the
subject in motion or convey a
sense of motion
Shutter priority shooting
38
White balance
WB bracketing
41
49
Taking pictures with the correct
color
24 EN
Live guide
18
40
53
Taking pictures so that whites
come out white and blacks come
out black
Exposure compensation
HIGH KEY/LOW KEY
Reducing image noise (mottling)
NOISE REDUCT.
76
69
Monitor brightness
adjustment
Optimizing the LCD monitor
LIVE VIEW BOOST
IMAGE STABILIZER
DIS MODE
74
50
17
Reducing camera shake
ISO
41, 75
30
Self-timer
Taking pictures while checking the
level of the camera
w
33, 74
32
Choosing an aspect ratio
Aspect ratio
Framing grid selection
Displaying guides to aid
composition
74
g
69
Playback
Displaying the image after the
picture is taken
REC VIEW
Checking whether the subject is
in focus
Close-up playback
14, 60
14, 60
Quickly searching for the desired
image
Index display/Calendar
display
Viewing images on a TV
Playback on TV
JPEG EDIT
67
63
Brightening a dark backlit image
g
Camera Settings
CUSTOM RESET
MY MODE SETUP
70
Saving the settings
73, 104
Changing the menu display
language
69
W
EN 25
Table of Contents
Image quality (record mode) .....31
Basic guide
3
Choosing a record mode..........31
Preparations for shooting ...........3
Setting the image aspect...........32
Using face detection ..................32
Charging and inserting
the battery ...............................3
Turning [g FACE DETECT]
on ..........................................32
Inserting and removing cards.....4
Attaching a lens to the camera...5
Power on ....................................6
Setting the date/time...................7
Taking pictures using face
detection................................32
Switching the information
display.........................................33
Names of parts and functions.....8
Camera.......................................8
Mode dial..................................10
Display magnification ................34
Panoramas..................................35
Basic operations ........................12
Taking pictures for a
panorama..............................35
Taking photographs/shooting
movies...................................12
Playback/Erasing......................14
Other shooting options and
advanced settings
Single-frame playback
Close-up playback
Index display
14
36
“Point-and-shoot” photography
(Pprogram mode)......................36
Movie playback
Erasing images
15
15
Choosing aperture
(Aaperture-priority mode)........37
Using art filters..........................16
Shooting in scene mode...........17
Choosing shutter speed
(Sshutter-priority mode)...........38
Using the iAUTO mode live
guides....................................18
Choosing aperture and shutter
speed (Mmanual mode)............39
Using live control......................20
Using the menus.......................21
Choosing when the exposure
ends (bulb) ............................39
Information displayed in the
monitor........................................22
Controlling exposure
(exposure compensation)..........40
Shooting ...................................22
Playback...................................23
Previewing the effects of
exposure compensation and
white balance ........................40
Quick task index
24
ISO sensitivity.............................41
Adjusting color
(white balance) ...........................41
Basic photography and useful
functions
30
White balance compensation ...42
One-touch white balance..........43
Sequential shooting/
using the self timer ....................30
26 EN
Choosing a focus mode
Taking a photograph when
(AF mode)....................................44
recording ends.......................58
Choosing a focus target
Viewing movies ..........................58
(AF target) ...................................45
Using a saved AF target...........45
Focus lock ................................46
Playback options
59
Single-frame playback ...............59
Close-up playback......................60
Zoom frame AF...........................46
Measuring subject brightness
(metering)....................................47
Index display/
calendar display .........................60
Exposure lock (AE lock) ............47
Information display ....................61
Slideshow....................................62
Editing still images.....................63
Rotate ..........................................64
Image overlay .............................64
Audio recording..........................65
Varying settings over a series of
photographs (bracketing)..........48
Reducing camera shake
(the image stabilizer)..................50
Recording multiple exposures
in a single image
(multiple exposure) ....................51
Protecting images ......................65
Protecting selected frames.......66
Canceling all protections ..........66
Processing options
(picture mode) ............................52
Flash shooting
54
Erasing images...........................66
Erasing selected frames...........66
All-frame erase.........................66
Using a flash
(flash photography) ...................54
Flash intensity control...............55
Playback on TV...........................67
Using external flash units
designated for use with
this camera .................................55
Camera setup
69
Setup Menu.................................69
Other external flash units..........55
X(Date/time setting) .............69
W(Changing the display
language) ..............................69
Shooting and viewing movies
56
s(Monitor brightness
adjustment)............................69
Changing the settings for
movie recording .........................56
REC VIEW................................69
cMENU DISPLAY...................69
FIRMWARE..............................69
Adding effects to a movie .........56
Record mode............................57
Recording sound ......................57
Resetting the camera
settings........................................70
Recording movies with the
shutter button.............................57
EN 27
Table of Contents
USB MODE
75
Registering [RESET1]/
[RESET2] ..............................70
VEXP/e/ISO .......................75
Using reset settings..................70
EV STEP
75
75
75
75
75
75
75
75
75
METERING
AEL Metering
ISO
Customizing camera settings
71
ISO STEP
Custom Menu..............................71
ISO-AUTO SET
ISO-AUTO
BULB TIMER
ANTI-SHOCK z
Custom Menu options................72
RAF/MF ..................................72
AF MODE
72
72
72
72
72
72
72
W#CUSTOM..........................75
AF AREA
#X-SYNC.
#SLOW LIMIT
w+F
75
75
75
RESET LENS
BULB FOCUSING
FOCUS RING
MF ASSIST
XK/COLOR/WB...................76
NOISE REDUCT.
NOISE FILTER
WB
76
76
76
76
76
76
76
77
PSET HOME
SBUTTON ..............................72
AEL/AFL
72
72
72
72
73
73
ALL >
AEL/AFL MEMO
;FUNCTION
R FUNCTION
MY MODE SETUP
BUTTON TIMER
COLOR SPACE
SHADING COMP.
KSET
PIXEL COUNT
YRECORD/ERASE................77
TRELEASE ............................73
QUICK ERASE
RAW+JPEG ERASE
FILE NAME
77
77
77
77
78
78
RLS PRIORITY S
73
RLS PRIORITY C
73
UDISP/8/PC.........................73
EDIT FILENAME
PRIORITY SET
dpi SETTING
HDMI
73
73
74
74
74
74
74
74
74
74
74
74
75
75
VIDEO OUT
SLEEP
ZMOVIE .................................78
LIVE VIEW BOOST
g FACE DETECT
G/INFO SETTING
KCONTROL SETTING
HISTOGRAM SETTING
EVF ADJUST
nMODE
MOVIE+STILL
78
78
78
MOVIE R
K
b
UTILITY .........................78
PIXEL MAPPING
78
78
78
EXPOSURE SHIFT
8 WARNING LEVEL
BACKLIT LCD
MODE GUIDE
qCLOSEUP MODE
8(Beep sound)
VOLUME
Using the super control
panel............................................81
28 EN
Using your charger abroad .......96
Interchangeable lenses..............97
Printing pictures
82
Print reservation (DPOF) ...........82
M.ZUIKO DIGITAL
interchangeable lenses .........97
Creating a print order................82
Resetting the print reservation
data .......................................83
M.ZUIKO DIGITAL lens
specifications.........................98
Direct printing (PictBridge) .......83
Four Thirds Adapter..................99
Connecting the camera to
a printer.................................84
Using electronic view finder
(sold separately).......................100
Easy printing.............................84
Custom printing ........................85
Program line diagram
(Pmode) ...................................101
Exposure warning display.......101
Connecting the camera to a
computer
Flash synchronization and
shutter speed............................102
87
Connecting the camera to
a computer..................................87
Flash modes that can be set
by shooting mode ....................102
Installing the supplied
computer software (ib)...............88
Focal lengths that can be
set ..............................................102
External flash shooting............103
Shooting tips and
maintenance
Wireless remote control
flash photography....................103
89
Shooting tips and
information..................................89
Functions that can be
registered with My Mode and
Custom Reset Setting..............104
Error codes .................................91
Record mode and file size/
number of storable still
pictures .....................................105
Cleaning and storing the
camera.........................................93
Cleaning the camera ................93
Storage.....................................93
Menu directory..........................106
Specifications...........................109
SAFETY PRECAUTIONS.......... 111
Index..........................................118
Cleaning and checking
the image pickup device........93
Pixel mapping - Checking the
image processing functions...94
Information
95
Card basics.................................95
Usable cards.............................95
Formatting the card ..................95
Battery and charger ...................96
EN 29
Basic photography and useful functions
1
Sequential shooting/using the self timer
The camera will take photos at a rate of about 3 frames per second (fps) while
the shutter button is pressed all the way down. Alternatively, the self-timer can be
used for self- or group-portraits or to reduce camera shake when the camera is
mounted on a tripod or otherwise fixed in place.
1 Press the jY button (G) to display the
1
direct menu.
SINGLE
P
o
j Y12s
Y2s
2 Select an option using HI and press i.
Shoots 1 frame at a time when the shutter button is
pressed (normal shooting mode).
Single-frame shooting
o
Shoots at approximately 3 frames/sec. for as
long as the shutter button is pressed (S-AF or MF
selected for [AF MODE] (P. 44)).
Sequential shooting
j
Press the shutter button halfway to focus, the rest
of the way down to start the timer. First, the self-
timer lamp lights up for approximately 10 seconds,
then it blinks for approximately 2 seconds and the
picture is taken.
Press the shutter button halfway to focus, the rest
of the way down to start the timer. The self-timer
lamp blinks for approximately 2 seconds, and then
the picture is taken.
Self-timer 12 SEC
Self-timer 2 SEC
Y12s
Y2s
$ Notes
• To cancel the activated self-timer, press the jY button.
• During sequential shooting, focus, exposure, and white balance are locked at the
first frame (during S-AF, MF).
# Caution
• During sequential shooting, if the battery check blinks due to low battery, the
camera stops shooting and starts saving the pictures you have taken on the card.
The camera may not save all of the pictures depending on how much battery power
remains.
• Fix the camera securely on a tripod for self-timer shooting.
• If you stand in front of the camera to press the shutter button halfway when using
the self-timer, the photograph may be out of focus.
30 EN
Image quality (record mode)
Adjust image quality (record mode). Choose a mode according to how the picture
will be used: printed, retouched on a computer, displayed on the web, or used
for some other purpose. YN, a flexible JPEG mode, is recommended in most
situations.
Choosing a record mode
1 Display the live control (P. 20) and select
j
WB
the record mode item using FG.
AUTO
1
IS OFF
L F
4032x3024
2 Select an option using HI and press i.
P
RAW L F L N M N S N
38
Record mode
•
The selected option is displayed in the monitor.
„ Supported record modes
Choose from RAW and four JPEG modes. The four JPEG modes (YF, YN, XN, and
WN) shown in the table are the options available at camera default settings. Choose a
RAW+JPEG option to record both a RAW and a JPEG image with each shot.
„ Image size and recording options
JPEG modes combine image size (Y, X, and W) and compression ratio (SF, F, N, and B).
Compression rate
SF
Image size
Pixel count
Application
F
N
B
(Super
(Fine)
(Normal)
(Basic)
Fine)
Y(Large)
YSF
YF*
YN*
YB
4032×3024
3200×2400
2560×1920
1600×1200
1280×960
1024×768
X(Middle)
XSF
XF
XN*
XB
Select for the
print size
W(Small)
WSF
WF
WN*
WB
For small
640×480
prints and use
on a web site
*
Default.
• You can choose the four JPEG modes available. g“KSET” (P. 76)
• You can change the dimensions of Xand Wimages. g“PIXEL COUNT” (P. 77)
RAW image data
RAW image data are raw data that have yet to be processed to create a photograph.
RAW files are generally used when you wish to modify the pictures after shooting
or to save the unmodified data for later use. RAW images have the file extension
“.ORF” and can not be displayed on cameras made by other manufacturers, viewed
in general-purpose software, or selected for printing. The camera can be used to
edit RAW data and create JPEG copies. g“Editing still images” (P. 63)
EN 31
Setting the image aspect
You can change the aspect ratio (horizontal-to-vertical ratio) when taking pictures
using live view. Depending on your preference, you can set the aspect ratio to
[4:3] (standard), [16:9], [3:2], or [6:6].
1 Display the live control (P. 20) and select
j
WB
AUTO
the aspect ratio item using FG.
IS OFF
2 Use HI to select an aspect ratio and
L F
4 : 3
press i.
4:3
16:9
3:2
6:6
P
1
# Caution
• JPEG images are cropped to the selected aspect ratio; RAW images, however, are
not cropped but are instead saved with information on the selected aspect ratio.
• When RAW images are played back, the selected aspect ratio is shown by a frame.
% Tips
• For information on cropping existing photographs or changing their aspect ratio,
see: g“Editing still images” (P. 63)
Using face detection
If [ON] is selected, faces detected when [G(Digital ESP metering)] (P. 47) is
chosen for metering or [B(ALL TARGETS)] (P. 45) is chosen for AF target
selection are indicated by a white frame and used to set exposure and focus.
Turning [g FACE DETECT] on
1 Display the live control (P. 20) and select
AUTO
[g FACE DETECT] using FG.
e
-
S AF
2 Use HI to select [ON] and press i.
ISO
FACE DETECT ON
OFF ON
AUTO
P
Taking pictures using face detection
1 Frame your subject in the monitor. Faces
detected by the camera are indicated by
white borders.
ISO
AUTO
L
N
2 Press the shutter button halfway to focus.
P
250 F5.6
38
3 Press the shutter button the rest of the
way down to shoot.
32 EN
# Caution
• During sequential shooting, face detection will work only at the first shot.
• Depending on the subject, the camera may not be able to correctly detect the face.
• If [M(SINGLE TARGET)] is chosen for AF target selection, the camera will focus
on the subject in the selected focus target.
• In metering modes other than [G(Digital ESP metering)], the camera will meter
exposure for the selected position.
Switching the information display
You can switch the information displayed on the monitor by pressing INFO button
repeatedly.
1
*2
ISO
ISO
AUTO
AUTO
L
N
L
N
P
P
250 F5.6
38
250 F5.6
38
Image only*3
Information display on*1
Histogram display*3
F
-
0.3
0.0
ISO
AUTO
L
N
+0.3
+0.7
SET
P
F
WB/
250 F5.6
38
Multi view display*3
Highlight & Shadow display*3
*1 With [G/INFO SETTING] (P. 74), you can also select [w]/[x]/[y]/[X] for the
ruled line display.
*2 During multiple exposure shooting (P. 51), the information display then switches to
“Multiple exposure display”.
*3 Can be hidden with [G/INFO SETTING] (P. 74).
Histograms
Histograms show how pixels of different brightnesses
are distributed and are used as a guide to exposure.
The horizontal axis shows brightness, the vertical axis
the number of pixels of each brightness in the image.
Brightnesses that exceed a specified upper limit are
shown in red, those under a specified lower limit in blue.
The green portion shows the distribution in the spot
metering area.
EN 33
Display magnification
Press Uin the shooting display to display the zoom frame. To exit, press i.
ISO
AUTO
L
N
P
10x
250 F5.6
30
1
Position the zoom frame. To return the zoom frame to the default
position, press and hold i.
F/G/H/I
Press the shutter Press the shutter button halfway to override the currently selected
button halfway
focus target and focus on the subject in the zoom frame.
U
Zoom in. Press Uagain to zoom out.
Display a menu of zoom ratios. Press FG to select the zoom
ratio (7×/10×/14×). Press i or INFO to exit.
INFO
# Caution
• The Ubutton does not zoom the lens in or out. The Ubutton can be used to zoom
in on the image displayed in the monitor and check focus when taking photographs,
but not for zoom photography. Press i to return to shooting mode.
34 EN
Panoramas
If you have installed the supplied computer software (ib), you can use it to join
pictures together to form a panorama. g “Installing the supplied computer
software (ib)” (P. 88)
Taking pictures for a panorama
1 Rotate the mode dial to SCN.
1
2 Select [PANORAMA] and press i.
3 Use FGHI to choose a pan direction.
4 Take a picture, using the guides to frame
M
250 F5.6
38
the shot.
•
Focus, exposure, and other settings are fixed at the values for the first shot.
5 Take the remaining images, framing each shot so that the guides
overlap with the previous picture.
M
[
]
[
]
EXIT
EXIT
250 F5.6
38
2
3
g
•
A panorama may include up to 10 images. A warning indicator ( ) is displayed
after the tenth shot.
6 After taking the last shot, press i to end the series.
# Caution
• During panorama shooting, the image previously taken for position alignment will
not be retained. With the frames or other markers for display in the images as a
guide, set the composition such that the edges of the overlapping images overlap
within the frames.
$ Notes
• Pressing the i button before shooting the first frame returns to the scene mode
selection menu. Pressing the i button in the midst of shooting ends the sequence
of panorama shooting, and allows you to continue with the next one.
EN 35
Other shooting options and advanced
settings
2
“Point-and-shoot” photography (Pprogram mode)
In mode P, the camera automatically adjusts shutter speed and aperture in
response to subject brightness.
1 Set the mode dial to P.
2
AF confirmation mark
2 Take pictures.
•
The optimal shutter speed and aperture are
displayed in the monitor.
ISO
AUTO
L
N
Shooting mode
P
250 F5.6
38
Shutter speed
Aperture value
Program shift (%)
In mode P, you can choose different combinations
of aperture and shutter speed without changing
exposure by pressing the Fbutton (F) on the
arrow pad. This is known as “program shift.” The
shooting mode changes to %. To exit, press FG
until the shooting mode changes from %to Por
turn the camera off and then on again.
ISO
AUTO
L
N
P
s
250 F5.6
38
# Caution
• Program shift is not available when you are using
Program shift
a flash.
% Tips
• The shutter speed and aperture displays flash if the camera is unable to achieve
optimal exposure. See “Exposure warning display” (P. 101).
36 EN
Choosing aperture (Aaperture-priority mode)
In mode A, you choose the aperture and let the camera automatically adjust
shutter speed for optimal exposure.
1 Rotate the mode dial to A.
2 After pressing the Fbutton (F), use
FG to choose the aperture.
2
ISO
AUTO
L
N
A
250 F5.6
38
Aperture value
3 Take pictures.
•
Larger apertures (lower f-numbers) decrease depth of field (the area in front
of or behind the focus point that appears to be in focus), softening background
details. Smaller apertures (higher f-numbers) increase depth of field.
When the
When the
aperture value
(f-number) is
decreased
aperture value
(f-number) is
increased
Preview function
R (movie) button
<button
If [PREVIEW] (P. 80) is assigned to the <or R (movie)
button, pressing the <or R (movie) button stops
aperture down to the selected value, allowing you to
preview depth of field in the monitor. g“;FUNCTION,
R FUNCTION” (P. 80)
EN 37
Choosing shutter speed (Sshutter-priority mode)
In mode S, you choose the shutter speed and let the camera automatically adjust
aperture for optimal exposure.
1 Rotate the mode dial to S.
2 After pressing the Fbutton (F), use
FG to choose the shutter speed.
2
ISO
AUTO
L
N
S
250 F5.6
38
Shutter speed
3 Take pictures.
•
A fast shutter speed can freeze a fast action scene without any blur.
A slow shutter speed will blur a fast action scene. This blurring will give the
impression of dynamic motion.
Fast shutter
speed
Slow shutter
speed
38 EN
Choosing aperture and shutter speed (Mmanual mode)
In mode M, you choose both the aperture and the shutter speed. At a speed of
BULB, the shutter remains open while the shutter button is pressed.
1 Rotate the mode dial to M.
2 After pressing the Fbutton (F), use
HI to choose the aperture and FG
to choose the shutter speed.
•
The range of aperture values available varies with the lens type.
•
The shutter speed can be set to 1/2000–60 sec. or [BULB].
2
3 Take pictures.
Noise in images
While shooting at slow shutter speeds, noise may appear on-screen. These
phenomena are caused when current is generated in those sections of the
image pickup device that are not normally exposed to light, resulting in a rise
in temperature in the image pickup device or image pickup device drive circuit.
This can also occur when shooting with a high ISO setting in a high-temperature
environment. To reduce this noise, the camera activates the noise reduction
function. g “NOISE REDUCT.” (P. 76)
# Caution
• Exposure compensation is not available in Mmode.
Choosing when the exposure ends (bulb)
You can take a picture with a bulb exposure time in which the shutter stays open
as long as you hold down the shutter button. Time the end of the exposure to suit
the subject. Use for landscapes and fireworks. In Mmode, set the shutter speed
to [BULB].
• [BULB] is displayed on the LCD monitor.
% Tips
• To automatically end bulb shooting after a specified period of time: g “BULB
TIMER” (P. 75)
• To fix the focus during manual focus shooting: g“BULB FOCUSING” (P. 72)
# Caution
• For bulb photography, we recommend that you mount the camera on a tripod or rest
it on a level, stable surface.
• The following functions are not available during bulb shooting:
Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/
flash bracketing
EN 39
Controlling exposure (exposure compensation)
Press the Fbutton (F) and use HI to adjust exposure compensation. Choose
positive (“+”) values to make pictures brighter, negative (“–”) values to make
pictures darker. Exposure can be adjusted by ±3EV.
Negative (–)
No compensation (0)
Positive (+)
2
% Tips
• To change the exposure adjustment interval: g“EV STEP” (P. 75)
# Caution
• Exposure compensation is not available in A, M, or SCN modes.
• Changing the default exposure restricts the range of exposure compensation values
available.
Previewing the effects of exposure compensation and white
balance
You can check the effects of exposure compensation and white balance on a
4-split screen.
F
1 Press the INFO button repeatedly to
display the multi view display.
-
0.3
0.0
g“Switching the information display” (P. 33)
•
Use FG to switch between exposure
compensation and white balance.
+0.3
+0.7
SET
F
WB/
i
2 Use HI to select the desired value and press
.
•
You can take the picture using the set value.
# Caution
• This function cannot be used in A, ART, SCN, n or Mmodes.
40 EN
ISO sensitivity
Increasing ISO sensitivity increases noise (graininess) but allows photographs
to be taken when lighting is poor. The setting recommended in most situations
is [AUTO], which starts at ISO 200 — a value that balances noise and dynamic
range — and then adjusts ISO sensitivity according to shooting conditions.
Choose ISO 100 when reducing noise is more important than enhancing dynamic
range.
1 Display the live control (P. 20) and select the ISO sensitivity item
using FG.
i
2 Select an option using HI and press
.
AUTO
•
The selected option is displayed in the monitor.
2
e
-
S AF
gOFF
ISO-A
200
RECOMMEND
1000 F8.0 +2.0
ISO-A
200
P
AUTO 100 125 160 200 250
AUTO
The sensitivity is set automatically according to the shooting conditions.
100–3200 Sensitivity is set to the selected value.
% Tips
• The default value and upper limit for auto ISO sensitivity can be selected using
[ISO-AUTO SET] (P. 75).
• The options available for ISO sensitivity can be selected using [ISO STEP] (P. 75).
• Auto sensitivity can be enabled in Mmode using [ISO-AUTO] (P. 75).
Adjusting color (white balance)
White balance (WB) ensures that white objects in images recorded by the camera
appear white. [AUTO] is suitable in most circumstances, but other values can be
selected according to the light source when [AUTO] fails to produce the desired
results or you wish to introduce a deliberate color cast into your images.
1 Display the live control (P. 20) and select
j
WB
AUTO
the white balance item using FG.
IS OFF
L F
WB AUTO
i
2 Select an option using HI and press
.
2
P
AUTO
5
3 1 w
•
The selected option is displayed in the monitor.
EN 41
Color
temperature
WB mode
Auto white
Light conditions
Used for most light conditions (when there
is a white portion framed on the LCD
monitor). Use this mode for general use.
For shooting outdoors on a clear day, or to
capture the reds in a sunset or the colors
in a fireworks display
AUTO
k
balance
5300K
7500K
5
For shooting outdoors in the shadows on
a clear day
2
6000K
3000K
For shooting outdoors on a cloudy day
For shooting under a tungsten light
For shooting under white fluorescent
lighting
For shooting under a neutral white
fluorescent lamp
3
1
Preset white
balance
4000K
4500K
w
x
2
For shooting under a daylight fluorescent
lamp
For flash shooting
6600K
5500K
y
n
Choose when a white or gray subject can
be used to measure white balance and
the subject is under mixed lighting or lit
by an unknown type of flash or other light
source.
Color
One-touch white
balance
(P. 43)
temperature
set by one-
touch WB.
V
After pressing the INFO button, use HI
buttons to select a color temperature and
then press i.
Custom white
balance
2000K–
14000K
CWB
White balance color temperature
As their temperature increases, objects first start to shine red and then to shine blue
as the temperature rises further. Color temperature expresses the color of light in
this way using absolute temperatures in degrees K (kelvin).
• Fluorescent light sources indicated by
white dots in the accompanying figure
have colors that differ slightly from
those on the color temperature scale;
the values shown in the figure have
been converted to color temperatures
for illustrative purposes.
White balance compensation
This function lets you make fine changes to the auto WB and preset WB settings.
1 Select [WB] in cCustom Menu (P. 71) tab X.
2 Select the option to be modified and press I.
3 Select a slider with HI and use FG to choose the amount.
42 EN
Adjusting the white balance in the A direction
(Amber-Blue)
>
AUTO
A
G
–
5
+
2
Depending on the original WB conditions, the image
will become more amber when adjusted toward +, and
bluer when adjusted toward –.
WB PREVIEW
BACK
SET
Adjusting the white balance in the G direction
(Green-Magenta)
Depending on the original WB conditions, the image will become greener when
adjusted toward +, and magenta when adjusted toward –.
•
Choose from values between –7 and +7.
4 Press i to save settings and exit.
% Tips
2
• After setting the compensation value, point the camera at the subject to take test
shots. When the R (movie) button is pressed, sample images that have been taken
with the current WB settings are displayed.
• Adjusting all WB mode settings at once: g“ALL >” (P. 76)
One-touch white balance
Measure white balance by framing a piece of paper or other white object under
the lighting that will be used in the final photograph. This is useful when shooting
a subject under natural light, as well as under various light sources with different
color temperatures.
1 After selecting [V (One-touch white balance)] (P. 42) , press
the INFO button.
2 Frame a white object in the display.
•
Frame the object so that it fills the display and no shadows fall it.
3 Press the shutter button all the way down.
•
The one-touch white balance screen appears.
4 Select [YES] and press the i button.
•
•
The new value is saved as a preset white balance option.
The new value is stored until one-touch white balance is measured again.
Turning the power off does not erase the data.
% Tips
• If the subject is too bright or too dark or visibly tinted, the message
“WB NG RETRY” will be displayed and no value will be recorded.
Correct the problem and repeat the process from Step 1.
• Paper that is a neutral gray color rather than white can also be used.
EN 43
Choosing a focus mode (AF mode)
Select a focusing method (focus mode).
1 Display the live control (P. 20) and select
AUTO
the AF mode item using FG.
e
-
S AF
-
S AF
2 Select an option with HI and press the
gOFF
ISO
SINGLE AF
i button.
AUTO
P
S-AF C-AF MF S-AF+MF
•
The selected AF mode is displayed on the LCD monitor.
The camera focuses once when the shutter button is
pressed halfway. When the focus is locked, a beep sounds,
and the AF confirmation mark and the AF target mark light
up. This mode is suitable for taking pictures of still subjects
or subjects with limited movement.
S-AF
(single AF)
2
The camera repeats focusing while the shutter button remains
pressed halfway. When the subject is in focus, the AF
confirmation mark lights up on the LCD monitor and the beep
sounds when the focus is locked at the first and second time.
Even if the subject moves or you change the composition of
the picture, the camera continues trying to focus.
C-AF
(continuous AF)
•
The AF target does not light up, even when the subject is
in focus.
• Four Thirds system lenses focus using S-AF.
This function allows
you to manually focus
on any subject.
)
Near
MF
Focus ring
(manual focus)
S-AF+MF
After pressing the shutter button halfway to focus in S-AF
(Simultaneous use of S-AF mode, you can turn the focus ring to fine-adjust focus
mode and MF mode)
manually.
Press the shutter button halfway to focus; the camera then
tracks and maintains focus on the current subject while the
shutter button is held in this position.
• The AF target is displayed in red if the camera can no
longer track the subject. Release the shutter button
and then frame the subject again and press the shutter
button halfway.
C-AF+TR
(AF Tracking)
• Instances in which focus tracking is not available are
listed below. S-AF will be used instead.
Four Thirds system lenses
% Tips
•
•
•
The [RLS PRIORITY S] (P. 73) and [RLS PRIORITY C] (P. 73) options can be used
to choose whether the shutter can be released when the camera is unable to focus.
[MF ASSIST] (P. 72) can be used to enable automatic zoom display when the lens
focus ring is rotated.
[FOCUS RING] (P. 72) allows you to change the rotational direction of the focus ring.
44 EN
Choosing a focus target (AF target)
This camera has 11 AF targets for focusing on the subject with auto focus.
[AF AREA] options allows you to select the AF target according to the subject or
the composition.
1 Press the Pbutton (H) to display options.
i
2 Select an AF target with HI and press the
button.
If all targets are surrounded by a green frame (BALL TARGETS)
• The camera automatically selects from the 11 focus targets.
2
If one target is surrounded by a green frame (M SINGLE TARGET)
• The camera will focus on the subject in the selected focus target.
Using a saved AF target
1 Assign [PHOME] to the <or R (movie) button.
g “P HOME” (P. 80)
2 Choose the AF target that will be used as the home position.
P
•
The home position is saved when the button is pressed. g“
(P. 72)
SET HOME”
3 During shooting, press the <or R (movie) button.
•
The camera will focus on the subject in the saved AF target.
# Caution
• The menus can be used to select the AF target but not to store the home position.
EN 45
Focus lock
Focus lock is suitable when selecting a composition where the subject is outside of the
AF targets or when shooting a subject which is difficult to focus on with auto focus.
1 Position the AF target over your subject and press the shutter
button halfway.
•
Make sure that the AF confirmation mark is lighting up.
2 While pressing the shutter button halfway, change the
composition as necessary.
•
•
While pressing the shutter button halfway, the focus is locked.
Do not change the distance between the camera and the subject while pressing
the shutter button halfway.
2
3 Press the shutter button all the way to take a picture.
# Caution
• If the contrast of the subject is weak, such as when the lighting is insufficient or the
subject cannot be seen clearly because of fog, the focus may not be achieved.
Zoom frame AF
Pressing the Ubutton displays a zoom frame; to focus on the area shown by the
zoom frame, press the shutter button halfway.
1 Press U.
•
•
The zoom frame will be displayed. Use FGHI to position the zoom frame.
Press INFO and use FG to choose the zoom ratio.
2 Press the shutter button halfway to initiate autofocus.
3 Press Uagain to zoom in on the selected area.
•
•
Press Uto toggle between the zoom frame and zoom displays. The photograph
can be taken at any time.
Press i to exit.
46 EN
Measuring subject brightness (metering)
Choose how the camera meters subject brightness.
1 Display the live control (P. 20) and select
AUTO
e
the metering item using FG.
e
-
S AF
gOFF
ISO
ESP
AUTO
5
5
e
J
5
P
HI
SH
2 Select an option with HI and press i.
The camera meters exposure in 324 areas of the
Digital ESP
metering
frame and optimizes exposure for the current scene or
(if face detection is on) portrait subject. This mode is
recommended for general use.
G
2
This metering mode provides the average
metering between the subject and the
Center weighted
averaging
metering
H
background lighting, placing more weight on
the subject at the center.
Choose this option to meter a small area
(about 2% of the frame) with the camera
pointed at the object you wish to meter.
Exposure will be adjusted according to
the brightness at the metered point.
Increases spot metering exposure. Ensures bright
subjects appear bright.
I
Spot metering
Spot metering -
highlight control
IHI
Lowers spot metering exposure. Ensures dark subjects
appear dark.
Spot metering -
shadow control
ISH
3 Press the shutter button halfway.
•
Normally, the camera will start metering when the shutter button is pressed
halfway and lock exposure while the shutter button is held in this position.
Exposure lock (AE lock)
If AEL/AFL is assigned to the <or R (movie) button,
the button in question can be used to lock exposure at
the metered value (AE lock). Use when you want to set
exposure using a composition different from that which will
be used in the final photograph. Normally, the shutter button
is pressed halfway to lock both focus (AF) and exposure
(AE); to lock exposure and not focus, press the <or R
button.
ISO
AUTO
L
N
AEL
Ps
250 F5.6
38
AE lock
Pressing the <or R (movie) button locks exposure at the value metered for the
current subject. While the button is pressed, exposure will remain locked, and
photographs can be taken by pressing the shutter button.
• To end AE lock, release the <or R (movie) button.
EN 47
% Tips
• To lock the exposure: g “AEL/AFL MEMO” (P. 72)
• To activate AE lock with a set metering mode: g“AEL Metering” (P. 75)
Varying settings over a series of photographs
(bracketing)
The camera automatically varies exposure, white balance, flash level, or
sensitivity over a series of exposures, “bracketing” the current setting. Bracketing
is available in P, A, S, and Mmodes.
j Y
o
/
1 Select [BRACKETING] in shooting menu
IMAGE STABILIZER OFF
BRACKETING
X(P. 106).
2
MULTIPLE EXPOSURE OFF
w
0.0
#RC MODE
OFF
BACK
SET
BRACKETING
AE BKT
2 Choose a bracketing type.
--
G--
A--
• 0is displayed in the monitor.
WB BKT
FL BKT
ISO BKT
--
--
BACK
SET
AE BKT (AE bracketing)
The camera varies exposure by 0.3EV, 0.7EV, or 1.0EV over three shots (no
modification on the first shot, negative on the second, and positive on the third).
In single-frame shooting, one shot is taken each time the shutter button is
pressed; in sequential shooting, all shots are taken while the shutter button is
pressed.
• The 0indicator turns green during bracketing.
BRAAEBKT
• The camera modifies exposure by varying aperture and
shutter speed (mode P), shutter speed (modes Aand
M), or aperture (mode S).
• The camera brackets the value currently selected for
exposure compensation.
OFF
AE BKT
WB BKT
FL BKT
ISO BKT
3F 0.3EV
3F 0.7E
V
3F 1.0E
V
BACK
SET
• The size of the bracketing increment changes with the
value selected for [EV STEP] (P. 75).
48 EN
WB BKT (WB bracketing)
Three images with different white balances (adjusted in specified color directions)
are automatically created from one shot, starting with the value currently selected
for white balance.
•
White balance can be varied by 2, 4, or 6 steps on each of
the A–B (Amber–Blue) and G–M (Green–Magenta) axes.
WB BKT
-
-
A B
G M
• The camera brackets the value currently selected for
white balance compensation.
3F 4STEP
3F 4STEP
SET
• No pictures will be taken during WB bracketing if there is
not enough memory on the card for the selected number
of frames.
BACK
2
FL BKT (FL bracketing)
The camera varies flash level over three shots (no modification on the first shot,
negative on the second, and positive on the third). In single-frame shooting, one
shot is taken each time the shutter button is pressed; in sequential shooting, all
shots are taken while the shutter button is pressed.
• The 0indicator turns green during bracketing.
BRAFLBKT
• The size of the bracketing increment changes with the
value selected for [EV STEP] (P. 75).
OFF
AE BKT
WB BKT
FL BKT
ISO BKT
3F 0.3EV
3F 0.7EV
3F 1.0EV
SET
BACK
ISO BKT (ISO bracketing)
The camera varies sensitivity by 0.3EV, 0.7EV, or 1.0EV over three shots (no
modification on the first shot, negative on the second, and positive on the third),
bracketing the current sensitivity setting (or if auto sensitivity is selected, the
optimal sensitivity setting) while keeping shutter speed and aperture fixed. In
single-frame shooting, one shot is taken each time the shutter button is pressed;
in sequential shooting, all shots are taken while the shutter button is pressed.
• The size of the bracketing increment does not change
BRAISOBKT
with the value selected for [ISO STEP] (P. 75).
OFF
AE BKT
WB BKT
FL BKT
ISO BKT
• Bracketing is performed regardless of the upper limit set
with [ISO-AUTO SET] (P. 75).
3F 0.3EV
3F 0.7EV
3F 1.0EV
SET
BACK
EN 49
Reducing camera shake (the image stabilizer)
You can reduce the amount of camera shake that can occur when shooting in low
light situations or shooting with high magnification.
1 Display the live control (P. 20) and select
j
WB
AUTO
the image stabilizer item using FG.
INFO
FOCAL LENGTH
L F
AUTO
P
50 mm
2 Select an option with HI and press i.
OFF
Image stabilizer is off.
Image stabilizer is on.
I.S. 1
2
Image stabilization applies only to vertical (Y) camera shake. Use when
panning the camera horizontally.
Image stabilization applies only to horizontal (Z) camera shake. Use when
panning the camera horizontally with the camera held in portrait orientation.
I.S. 2
I.S. 3
„ Setting the focal length
Use focal length information to reduce camera shake
when shooting with lenses that are not Micro Four
Thirds or Four Thirds system lenses.
j
WB
AUTO
1 Press the INFO button when the image
L F
AUTO
stabilizer is turned on.
P
50 mm
2 Use HI to choose a focus distance and press i.
•
Choose a focal length between 8mm and 1000mm. g “Focal lengths that
can be set” (P. 102)
•
Choose the value that most closely matches to the one that is printed on the lens.
# Caution
• The image stabilizer cannot correct excessive camera shake or camera shake that
occurs when the shutter speed is set to the slowest speed. In these cases, it is
recommended that you use a tripod.
• When using a tripod, set [IMAGE STABILIZER] to [OFF].
• When using a lens with an image stabilization function, turn off the image stabilizer
function of either the lens or the camera.
• If [IMAGE STABILIZER] is set to [I.S. 1], [I.S. 2] or [I.S. 3] and you turn off the
camera, the camera will vibrate. This is due to the camera initializing the image
stabilizer mechanism. Without this initialization, the image stabilizer may not be able
to achieve the proper effect.
•
You may notice an operating sound or vibration when the image stabilizer is activated.
• The image stabilizer will not activate at shutter speeds of over 2 seconds.
•
If the internal temperature of the camera exceeds the specified temperature, the
image stabilizer is deactivated and the image stabilizer icon lights red on the monitor.
A blinking icon indicates a malfunction; consult an Olympus Authorized Service Center.
50 EN
Recording multiple exposures in a single image
(multiple exposure)
A multiple exposure is created by overlaying a series of shots to create a single
image. The image is saved with the record mode set at the time the image is saved.
1 Select [MULTIPLE EXPOSURE] in shooting menu X(P. 106).
MULTIPLE EXPOSURE
2 Adjust settings.
FRAME
OFF
OFF
OFF
FRAME
Select [2F].
AUTO GAIN
OVERLAY
When set to [ON], the brightness of each
frame is set to 1/2 and the images are overlaid.
When set to [OFF], the images are overlaid
with the original brightness of each frame.
AUTO GAIN
BACK
SET
2
When set to [ON], a RAW image recorded
on a card can be overlaid with multiple
exposures and stored as a separate image.
The number of pictures taken is one.
OVERLAY
3 Take pictures.
•
When multiple exposure is set, i is displayed on
the LCD monitor. i is displayed in green when
shooting starts.
ISO
D
•
•
Press
to delete the last shot.
AUTO
L
N
The previous shot is superimposed on the view
through the lens as a guide to framing the next shot.
P
250 F5.6
38
% Tips
• To overlay 3 or more frames: To overlay 3 or more frames, save the image as a
RAW file and use [OVERLAY] to repeat the multiple exposure shooting.
• For more information on overlaying RAW images: g “Image overlay” (P. 64)
# Caution
• When multiple exposure is set, [SLEEP] is set to [OFF] automatically.
• RAW images taken with another camera cannot be used for the overlay image.
• When [OVERLAY] is set to [ON], the images displayed when a RAW image is
selected are developed with the settings at the time of shooting.
• To set the shooting functions, cancel multiple exposure shooting first. Some
functions cannot be set.
• Multiple exposure is cancelled automatically from the first picture in the following
situations.
The camera is turned off/The qbutton is pressed/The MENU button is pressed/
The shooting mode is set to a mode other than P, A, S, M/The battery power
runs out/The USB cable, AV cable and/or HDMI mini-cable is inserted/You switch
between the monitor and electronic view finder
• The information for the first frame during multiple exposure shooting is displayed as
the shooting information.
EN 51
• When a RAW image is selected using [OVERLAY], the JPEG image for the image
recorded in JPEG+RAW is displayed.
• When shooting multiple exposures using bracketing, priority is given to multiple
exposure shooting. While the overlay image is being saved, bracketing is reset to
the factory default setting.
Processing options (picture mode)
You can select image tone to create unique image effects. You can also fine-
adjust image parameters such as contrast and sharpness for each mode. The
adjusted parameters are recorded in each picture effect mode.
CARD SETUP
1 Select [PICTURE MODE] in shooting menu
CUSTOM RESET
W(P. 106)
2
j
PICTURE MODE
K
IMAGE ASPECT
4:3
BACK
SET
2 Select an option with HI and press i.
Produces more impressive-looking pictures matched to the
scene mode.
i-ENHANCE
h
Produces vivid colors.
VIVID
i
j
Z
a
Produces natural colors.
Produces flat tones.
NATURAL
MUTED
Produces beautiful skin tones.
Produces black and white tone.
PORTRAIT
MONOTONE
Select one picture mode, set the parameters, and register the
setting.
CUSTOM
52 EN
3 Press I to display settings for the selected option.
h
D
D
i-a
D
J
D
D
K
D
D
CONTRAST
SHARPNESS
GRADATION
Distinction between light and dark
Sharpness of the image
D
Adjust tone (gradation).
Divides the image into
detailed regions and adjusts
the brightness separately for
each region. This is effective
for images with areas of large
contrast in which the whites
appear too bright or the blacks
appear too dark.
AUTO
D
D
D
D
2
Use [NORMAL] mode for
general uses.
NORMAL
HIGH KEY
LOW KEY
Gradation for a bright subject.
Gradation for a dark subject.
Vividness of the color
D
D
D
D
D
SATURATION
k
k
EFFECT
(i-ENHANCE)
Sets the extent that the effect will
be applied.
k
Creates a black and white image.
The filter color is brightened
and the complementary color is
darkened.
B&W FILTER
(MONOTONE)
Creates a normal black and
white image.
N:NEUTRAL
Ye:YELLOW
Or:ORANGE
Reproduces clearly defined
white cloud with natural blue sky.
D
D
k
k
Slightly emphasizes colors in
blue skies and sunsets.
Strongly emphasizes colors in
blue skies and brightness of
crimson foliage.
R:RED
Strongly emphasizes colors in
red lips and green leaves.
G:GREEN
PICT. TONE
Colors the black and white image.
(MONOTONE)
Creates a normal black and
white image.
N:NEUTRAL
D
D
k
k
S:SEPIA
B:BLUE
Sepia
Bluish
P:PURPLE
G:GREEN
Purplish
Greenish
# Caution
• Changes to contrast have no effect at settings other than [NORMAL].
EN 53
Flash shooting
3
To raise the built-in flash for use, slide the flash switch. The built-in flash can be
used for flash photography in a variety of shooting conditions.
Using a flash (flash photography)
1 Raise the flash.
2 Press the #button (I) to display the current flash mode.
3 Use HI to choose a flash mode and press i.
•
The options available and the order in which they are displayed vary depending on
the shooting mode. g“Flash modes that can be set by shooting mode” (P. 102)
The flash fires automatically in low light or
backlight conditions.
3
AUTO
Auto flash
The flash fires regardless of the light
conditions.
Fill-in flash
#
The flash does not fire.*1
This function allows you to reduce the
Flash off
$
Red-eye reduction
flash
red-eye phenomenon. In Sand Mmode,
the flash always fires.
!/H
Slow synchronization
(1st curtain)
Slow shutter speeds are used to brighten
dimly-lit backgrounds.
#SLOW
Slow synchronization
(1st curtain)/Red-eye
reduction flash
Combines slow synchronization with red-
eye reduction.
!SLOW
The flash fires just
before the shutter closes
to create trails of light
behind moving light
#SLOW2/
2nd CURTAIN (2nd curtain)
Slow synchronization
sources.
#FULL
#1/4
#1/16
#1/64
Manual (FULL)*2
Manual (1/4)*2
Manual (1/16)*2
Manual (1/64)*2
The flash fires at full power.
The flash fires at 1/4 power.
The flash fires at 1/16 power.
The flash fires at 1/64 power.
*1 Both the built-in flash and optional external flash units turn off.
*2 Built-in flash only.
4 Press the shutter button all the way.
# Caution
•
In [!/H(Red-eye reduction flash)], after the pre-flashes, it takes about 1
second before the shutter is released. Hold the camera firmly to avoid camera shake.
• [!/H(Red-eye reduction flash)] may not work effectively under some shooting
conditions.
• When the flash fires, the shutter speed is set to 1/160 sec. or slower. When shooting
a subject against a bright background with the fill-in flash, the background may be
overexposed.
54 EN
Flash intensity control
The flash intensity can be adjusted between [+3] and [–3]. It is useful to adjust the
exposure balance between the subject and the background when the subject is small
or far from the background. It is also useful when you intend to increase the contrast
(distinction between light and dark) of images to make the images more vivid.
1 Display the live control (P. 20) and select
AUTO
the Flash intensity control item using
e
FG.
-
S AF
gOFF
ISO
w
0.0
2 Choose the compensation value with
AUTO
P
HI and press the i button.
% Tips
• For information on flash bracketing: g“FL BKT (FL bracketing)” (P. 49)
3
# Caution
• This does not work when the flash control mode on the electronic flash is set to
MANUAL.
• If flash intensity is adjusted on the electronic flash, it will be combined with the
camera's flash intensity setting.
• When [w+F] is set to [ON], the flash intensity value will be added to the exposure
compensation value. g“w+F” (P. 75)
Using external flash units designated for use with
this camera
Optional external flash units designated for use with this camera support a wide
variety of options for flash photography, including automatic flash control, super
FP, and wireless flash control (P. 103).
Other external flash units
Observe the following precautions when mounting an external flash unit not
designated for use with this camera on the camera hot shoe:
• Using obsolete flash units that apply currents of more than about 5V to the camera
hot shoe X-contact will damage the camera.
• Connecting flash units with signal contacts that do not conform to Olympus
specifications may damage the camera.
• Use only with the camera in shooting mode Mat shutter speeds slower than 1/160s
and at ISO settings other than [AUTO].
• Flash control can only be performed by manually setting the flash to the ISO
sensitivity and aperture values selected with the camera. Flash brightness can be
adjusted by adjusting either ISO sensitivity or aperture.
• Use a flash with an angle of illumination suited to the lens. Angle of illumination is
usually expressed using 35-mm format equivalent focal lengths.
EN 55
Shooting and viewing movies
4
Use the R (movie) button to record High Definition (HD) movies with sound.
g“Taking photographs/shooting movies” (P. 12)
In movie mode, you can create movies that take advantage of the effects available in
modes Aand M. You can also customize camera settings to allow the shutter button
to be used to record movies (P. 80).
# Caution
• When recording a movie, you cannot change the settings for exposure
compensation and aperture value, and shutter speed.
• If [IMAGE STABILIZER] is activated while recording a movie, the recorded image
is enlarged slightly. Even if [I.S. 2] or [I.S. 3] is selected, the setting for [I.S. 1] is
applied.
• Stabilization is not possible when the camera shake is excessive.
• When using a lens with the image stabilizer function, turn off the image stabilizer
function of either the lens or the camera.
4
• You cannot use [g FACE DETECT] in movie mode.
•
The size of each movie file is limited to 2GB. With some types of media, shooting may
be interrupted unexpectedly before reaching the end of available recording time.
• When the inside of the camera becomes hot, shooting is automatically stopped to
protect the camera.
• Shooting can not be resumed while the camera displays a message stating that
recording is in progress.
• With some art filters, [C-AF] operation is limited.
•
It is recommended to use a SD speed class 6 compatible card for movie shooting.
Changing the settings for movie recording
Adding effects to a movie
n
MODE
n
MODE
n
(P. 71) tab
1 Select [ MODE] in cCustom Menu
MOVIE+S
P
A
M
Z
.
R
MOVIE
ART1
ART2
BACK
SET
i
2 Select an option and press the
button.
Optimal aperture is set automatically according to the brightness of the
subject.
P
Depiction of background is changed by setting the aperture. Use HI to
set aperture.
A
You control both aperture and shutter speed. Use HI to choose the
aperture, FG to select the shutter speed from values between 1/60 s
and 1/2000 s. Sensitivity can be set manually to values between ISO
200 and 1600; auto ISO sensitivity control is not available.
Movie can be recorded with effects of art filter mode.
g “Using art filters” (P. 16)
M
ART1–
ART6
56 EN
# Caution
• The camera may not correctly display the recording time in art filter mode. Movies
recorded in [ART5] (DIORAMA) mode play back at high speed; during recording,
the recording time is adjusted to reflect the playback time and advances more
slowly than usual.
Record mode
1 Display the live control (P. 20) and select
P
WB
AUTO
the record mode item using FG.
IS OFF
2 Select a movie record mode using HI
-
S AF
HD
i
HD QUALITY
and press the
button.
n
HD
SD
00:00
HD
SD
The number of pixels is 1280 × 720. You can record high-definition movies.
The number of pixels is 640 × 480.
4
Recording sound
1 Display the live control (P. 20) and select
ISO
AUTO
[MOVIE R] using FG.
2 Switch ON/OFF using HI and press
i
R
MOVIE
ON
the
button.
n
OFF ON
00:00
# Caution
• When recording sound in a movie, the sound made by the lens and camera
operating may be recorded. If desired, you can reduce these sounds by shooting
with [AF MODE] set to [S-AF], or by limiting the amount of times you press the
buttons.
• No sound is recorded in [ART5] (DIORAMA) mode.
Recording movies with the shutter button
If movie recording has not been assigned to the <or R (movie) button, you can
record movies using the shutter button.
AF confirmation mark
n
1 Set the mode dial to
.
2 Press the shutter button halfway down and
focus on what you wish record.
ISO
•
When the subject is in focus, the AF confirmation
AUTO
mark lights up.
n
250 F5.6
21:38
Available
recording time
nmode
display
EN 57
3 Press the shutter button all the way to
begin recording.
•
●REC lights up while both movie and sound are
recorded simultaneously.
4 Press the shutter button all the way to end
n
2:18
recording.
Lights up in red
during recording
Total recording
time
% Tips
• Recording silent movies: g“Recording sound” (P. 57)
Taking a photograph when recording ends
Select [ON] for [MOVIE+STILL] to take a still picture when movie recording is
finished. This feature is useful when you want to record a still picture as well as
the movie.
n
MODE
P
1 Select [MOVIE+STILL] in cCustom Menu
MOVIE+STILL
OFF
ON
(P. 71) tab Z.
4
R
MOVIE
2 Select [ON] and press the i button.
# Caution
BACK
SET
• This option is only available when the shutter button is
used to record movies.
Viewing movies
MOVIE
1 Display a movie in single-frame playback
and press the i button.
2 Select [MOVIE PLAY] using FG and
MOVIE PLAY
press the i button to begin playback.
m
BACK
SET
•
The following operations can be performed during
movie playback:
Pause or resume playback.
- While playback is paused, press
F to display the first frame and
press G to display the last frame.
Press H I to rewind or advance
one frame. Press and hold the
button to rewind or advance in
succession.
i
00:14 00:34
/
Elapsed time/Total recording time
Advance or rewind a movie.
H/I
Adjust volume.
F/G
58 EN
Playback options
5
Single-frame playback
To view pictures full frame, press the qbutton in
shooting mode.
• To exit to shooting mode, press qagain or press the
shutter button halfway.
[4032x3024,1/8]
L
N
100-0015
2010.02.01 12:30
15
View other pictures.
H/I
Erase the current picture (P. 15).
ERASE
• See “Erasing selected frames” (P. 66)
for information on erasing multiple
selected pictures, “All-frame erase”
(P. 66) for information on erasing all
pictures.
D
YES
NO
5
BACK
SET
Press the Ubutton to zoom in on
pictures (P. 60).
U
INFO
2x
Press the Gbutton to view multiple
pictures (P. 60).
G
2010.02.01 12:30
21
View information on the current picture (P. 61).
Protect the current picture (P. 65).
INFO
0
Display a menu of options, including
[JPEG EDIT] (P. 63), [RAW DATA EDIT]
(P. 63), [R] (P. 65), [ROTATE] (P. 64),
[m] (P. 62), [IMAGE OVERLAY] (P. 64),
[<] (P. 82). The options available vary
with the image displayed.
JPEG
JPEG EDIT
R
ROTATE
m
i
<
BACK
SET
EN 59
Close-up playback
Press the Ubutton to display a zoom frame in single-
frame playback.
INFO
2x
15
Position the zoom frame.
F/G/H/I
View the portion of the image visible in the
zoom frame at the selected zoom ratio.
• Press FGHI to scroll to other
areas of the image.
U
• Press INFO and use FG to zoom in
or out.
INFO
• Press Uand use HI to view other
2x
images at the same zoom ratio.
Exit to single-frame playback.
5
G
Index display/calendar display
To view multiple pictures, press the Gbutton during
single-frame playback.
2010.02.01 12:30
21
Press Gto increase the number of images displayed from 4 to
9, 25, or 100. To view the calendar display, press Gagain when
100 images are displayed. Only items for which [ON] is selected for
information settings will be displayed (P. 74).
G
U
Press Uto decrease the number of images displayed from 100
to 25, 9, or 4. To view the current image full frame, press Uagain
when 4 images are displayed. Only items for which [ON] is selected
for information settings will be displayed (P. 74).
Select a picture.
F/G/H/I
Protect the selected picture (P. 65).
0
Select the highlighted picture for protection or deletion. Selected
pictures are indicated by a v (P. 66).
i
60 EN
„ Calendar display
With the calendar, you can display images recorded on
the card by date. If more than one image was taken on a
single date, the image shot first on that date is displayed.
2010
2
31
7
1
8
2
9
3
10
17
24
3
4
11
18
25
4
5
12
19
26
5
6
13
20
27
6
14
21
28
7
15
22
1
16
23
2
i
Use FGHI to select a date and press the
button
to play back images for the selected date in single-frame
display.
8
9
10
11
Information display
This allows you to display detailed information about the image. The information
displayed changes each time the INFO button is pressed.
x
10
x
10
250 F5.6
45mm
+
2.0
±
0.0
ISO 100
WBAUTO
A
±
0
G±0
[
]
4032x3024,1/8
NATURAL
L
L
N
N
100-0015
15
100-0015
15
2010.02.01 12:30
5
Image only
Simplified display (P. 23)
Overall display (P. 23)
x
x
10
10
SHADOW HILIGHT
15
16
15
15
Light box display
Highlight & Shadow display
Histogram display
„ Histogram display
Display a histogram showing the distribution of brightness in the image.
„ Highlight & Shadow display
Overexposed areas (highlights) are shown in red, underexposed areas (shadows) in
blue.
„ Light box display
• Compare two images side-by-side. Press i to select the image on the opposite
side of the display.
• The current image is shown on the left, the next image on the right at the current
playback zoom ratio. Press i to select the image on the right as the current image
and display it on the left.
EN 61
• Press Uto zoom in on the current image.
Scroll both images.
Show selected
images on opposite
sides of the display.
Use FGHI
to scroll current
image.
U
U
INFO
2x
53
54
INFO
2x
53
54
2x
53
54
U
• While the images are zoomed in, press INFO and use FG to change the zoom
ratio. Press INFO again to exit.
% Tips
• Use [G/INFO SETTING] to choose the information available for display (P. 74).
Slideshow
This function displays images stored on the card one after another.
5
JPEG
1 Press i during playback and select the
JPEG EDIT
slideshow option.
R
ROTATE
m
<
BACK
SET
m
2 Adjust settings.
START
Start the slideshow. Images are displayed
BGM
MELANCHOLY
ALL
START
in order, starting with the current picture.
Set BGM (3 types) or turn BGM [OFF].
Set type of slideshow to execute.
SLIDE
BGM
SLIDE INTERVAL
MOVIE INTERVAL
3SEC
SLIDE
SHORT
SLIDE
Choose the length of time each slide is
BACK
SET
INTERVAL displayed from 2 to 10 seconds.
Select [FULL] to include full-length movie
MOVIE
clips in the slide show, [SHORT] to include
INTERVAL
only the opening portion of each clip.
i
3 Select [START] and press the
button.
•
•
The slideshow will start.
Press the i button to stop the slideshow.
Volume
Press FG during the slide show to adjust the overall volume of the camera
speaker. Press HI to adjust the balance between the background music and the
sound recorded with photographs or movies.
62 EN
% Tips
• A slideshow option is also available in the playback menu (P. 106).
# Caution
• If the slideshow is left running for about 30 minutes, the camera will turn off
automatically.
Editing still images
Recorded images can be edited and saved as new images.
1 Display the image to be edited and press i.
•
[RAW DATA EDIT] is displayed if the picture is a RAW image, [JPEG EDIT] if it
is a JPEG image. If the image was recorded at a setting of [RAW+JPEG], you
will be prompted to choose the format you wish to edit.
2 Select [RAW DATA EDIT] or [JPEG EDIT] and press i.
RAW DATA
EDIT
Create a JPEG copy of the RAW image using current camera
settings. Adjust camera settings before choosing this option.
Choose from the following options:
5
[SHADOW ADJ]:
[REDEYE FIX]:
Brightens a dark backlit subject.
Reduces the red-eye phenomenon during flash
shooting.
[P]:
Choose the size of the
crop using Uor G
and use FGHI to
position the crop.
SET
[ASPECT]:
Changes the aspect ratio of images from 4:3
(standard) to [3:2], [16:9], or [6:6]. After changing
the aspect ratio, use the arrow pad to specify the
trimming position.
JPEG EDIT
[BLACK & WHITE]: Creates black and white images.
[SEPIA]:
Creates sepia-toned images.
[SATURATION]:
Sets the color depth. Adjust the color saturation
checking the picture on the screen.
[Q]:
Converts the image file size to 1280 × 960,
640 × 480, or 320 × 240. Images with an aspect
ratio other than 4:3 (standard) are converted to
the closest image file size.
[e-PORTRAIT]:
Makes skin look smooth and translucent.
• You may not be able to compensate depending on the image if
face detection fails.
# Caution
• You cannot edit movies.
EN 63
• Red-eye correction may not work depending on the image.
• Editing of a JPEG image is not possible in the following cases:
When an image is recorded in RAW, when an image is processed on a PC, when
there is not enough space in the card memory, when an image is recorded on
another camera.
• When resizing ([Q]) an image, you cannot select a larger number of pixels than
was originally recorded.
• [P] and [ASPECT] can only be used to edit images with an aspect ratio of 4:3
(standard).
Rotate
Choose whether to rotate photographs.
1 Play the photograph back and press i.
2 Select [ROTATE] and press i.
3 Press F to rotate the image counterclockwise, G to rotate it
clockwise. The image rotates each time either button is pressed.
•
Press i to save settings and exit.
5
# Caution
• The rotated image is saved in its current orientation.
• Movies and protected images can not be rotated.
Image overlay
Up to 3 frames of RAW images taken with the camera can be overlaid and saved
as a separate image. The image is saved with the record mode set at the time the
image is saved.
1 With a RAW image displayed during playback, press i and
select [IMAGE OVERLAY].
IMAGE OVERLAY
2 Select the number of images in the overlay
i
and press
.
RAW
RAW
RAW
RAW
3 Use FGHI to select the RAW images
RAW
that will be used in the overlay and press
RAW
RAW
i
to select.
BACK
SET
IMAGE OVERLAY
4 When you have selected the number of
images specified in Step 2, the overlay will
be displayed.
5 Adjust gain.
x
0.3
x
0.3
x
0.1
BACK
SET
•
Use HI to select an image and use FG to adjust
gain.
64 EN
•
Gain can be adjusted in the range 0.1–2.0. Check the results in the monitor.
6 Press i. A confirmation dialog will be displayed; select [YES]
and press i.
% Tips
• To overlay 4 or more frames, save the overlay image as a RAW file and use [IMAGE
OVERLAY] repeatedly.
# Caution
• When the record mode is set to [RAW], the overlay image is saved as [YN+RAW].
Audio recording
Add an audio recording (up to 30sec. long) to the current photograph.
1 Display the image to which you want to add an audio recording
and press i.
JPEG
i
2 Select [R] and press
.
JPEG EDIT
•
To exit without adding a recording, select [NO].
R
5
ROTATE
m
<
BACK
SET
R
i
3 Select [RSTART] and press
to begin
recording.
•
To stop recording part-way through, press the i
button.
NO
R
START
ERASE
SET
BACK
i
4 Press
to end recording.
•
•
Images with audio recordings are indicated by a Hicon.
To delete a recording, select [ERASE] in Step 2.
# Caution
• You cannot record sound for protected images.
$ Notes
• Audio recording can also be accessed from the playback menu.
Protecting images
Protect important images from deletion. Protected
images can not be deleted in single-frame playback and
are not deleted when all frames are erased.To protect the
current picture in single-frame or index playback, press
the 0button.
[4032x3024,1/8]
L
N
100-0015
• Protected images are indicated by a 9icon.
2010.02.01 12:30
15
EN 65
•
Press the 0button again to remove protection.
# Caution
• Formatting the card erases all images even if they have been protected.
Protecting selected frames
During index display you can select multiple images and protect them all at the
same time.
1 In the index display, select an image you
want to protect using FGHI and press
i.
•
Selected images are shown by a v.
•
To cancel your selection, press the i button again.
2010.02.01 12:30
21
2 Press the 0button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1 Select [RESET PROTECT] in the q(playback) menu (P. 106).
2 Select [YES] and press i.
5
Erasing images
Erasing selected frames
Erase multiple selected frames.
ERASE SELECTED
1 In the index display, select an image you
want to protect using FGHI and press
YES
i.
NO
•
•
Selected images are shown by a v.
To cancel your selection, press the i button again.
BACK
SET
2 Press the D button.
3 Select [YES] and press i.
•
The selected images will be erased.
All-frame erase
Erase all images on the memory card.
1 Select [CARD SETUP] in shooting menu W(P. 106).
2 Select [ALL ERASE] and press i.
3 Select [YES] and press i.
•
All frames will be erased.
66 EN
Playback on TV
Use the AV cable provided with the camera to playback recorded images on
your TV. You can playback high-definition images on a high-definition TV by
connecting it to the camera using a commercially available HDMI mini-cable.
„ Connection via AV cable
Multi-connector
Connect to the TV
video input jack
(yellow) and audio
input jack (white).
AV cable (included)
1 Connect the TV and camera.
5
2 Use the camera to select the video signal format that matches
that of the connected TV ([NTSC]/[PAL]).
• g“VIDEO OUT” (P. 73)
3 Turn on the TV, and change “INPUT” to “VIDEO”(an input jack
connected to the camera).
# Caution
• The camera's monitor turns off automatically when the AV cable is connected to the
camera.
q
• Press the
button when connecting via an AV cable.
•
For details on changing the input source of the TV, refer to the TV's instruction manual.
• Depending on the TV's settings, the displayed images and information may become
cropped.
„ Connection via HDMI mini-cable
Connect to the HDMI
connector on the TV.
HDMI mini-
connector
HDMI mini-cable
(commercially available)
EN 67
1 Connect the HDMI mini-cable to the HDMI connector of the TV.
2 Connect the HDMI mini-cable to the HDMI connector of the camera.
3 Turn on the TV and switch “INPUT” to “HDMI INPUT”.
4 Turn on the camera.
# Caution
• For details on changing the input source of the TV, refer to the TV's instruction
manual.
• Use an HDMI mini-cable that matches the HDMI mini connector on the camera and
the HDMI connector on the TV.
• When the camera and TV are connected by both an AV cable and an HDMI mini-
cable, HDMI will take priority.
• Depending on the TV's settings, the displayed images and information may become
cropped.
• When you connect to a TV via an HDMI mini-cable, you can select the format of the
digital video signal. g“HDMI” (P. 73)
• You cannot shoot pictures or movies when the HDMI cable is connected.
5
• Do not connect the camera to other HDMI output devices. Doing so may damage
the camera.
• HDMI output is not performed while connected via USB to a computer or printer.
Using the TV remote control
The camera can be operated by a TV remote control when connected to a TV that
supports HDMI control.
1 Select [HDMI] in cCustom Menu (P. 71) tab U.
2 Select [HDMI CONTROL] and choose [ON].
3 Operate the camera by using the TV remote control.
•
•
You can operate the camera by following the operation guide displayed on the TV.
During single-frame playback, you can display or hide the information display by
pressing the “Red” button, and display or hide the index display by pressing the
“Green” button.
•
Some functions may be unavailable, even if displayed, depending on the TV.
68 EN
Camera setup
6
Setup Menu
Use the Setup Menu to set the basic camera functions.
For details on using the menu lists, see “Using the
menus” (P. 21).
-- :
.----
’ -- -.-
X
W
s
ENG.
j±0
k±0
REC VIEW
5SEC
c
MENU DISPLAY OFF
FIRMWARE
BACK
SET
Option
Description
g
Set the camera clock.
X(Date/
time setting)
W
(Changing
the display
language)
s(Monitor
brightness
adjustment)
P. 7
You can change the language used for the on-screen display
and error messages from ENGLISH to another language.
—
You can adjust the brightness and
color temperature of the monitor.
Color temperature adjustment will
s
6
–
5
+
2
affect only the LCD monitor display
during playback.
Use HI to switch between j (color
temperature) and k (brightness),
and use FG to adjust the value
between [+7]–[–7].
—
BACK
SET
For information on adjusting the brightness and color temperature
of the electronic view finder, see “EVF ADJUST” (P. 74).
Choose whether pictures are displayed immediately after
shooting and for how long. This is useful for making a brief
check of the picture you have just taken. Pressing the shutter
button halfway while checking the picture lets you resume
shooting immediately.
REC VIEW
[1SEC]–[20SEC]: Selects the number of seconds to display
each picture. Can be set in units of 1
second.
—
[OFF]:
The picture being recorded to the card is
not displayed.
[AUTOq]:
Displays the image being recorded, and
then switches to playback mode. This is
useful for erasing a picture after checking it.
cMENU
Choose whether to display the Custom Menu.
P. 71
—
DISPLAY
FIRMWARE Your product’s firmware version will be displayed. When you
make inquiries about your camera or accessories or when
you want to download software, you will need to state which
version of each of the products you are using.
EN 69
Resetting the camera settings
In P, A, S, or Mmode, current camera settings (including any changes you
have made) are retained when the power is turned off. To reset the camera to
the factory default settings, set [RESET]. You can register settings in advance to
[RESET1] and [RESET2].
The camera settings at that time are registered in [RESET1] and [RESET2]. For
details on the registered functions, refer to “Functions that can be registered with
My Mode and Custom Reset Setting” (P. 104).
Registering [RESET1]/[RESET2]
1 Select [CUSTOM RESET] in shooting menu W(P. 106).
2 Select either [RESET1]/[RESET2] to register and press I.
•
If settings have already been registered, [SET] is displayed next to [RESET1]/
[RESET2]. Selecting [SET] again overwrites the registered setting.
•
To cancel the registration, select [RESET].
3 Select [SET] and press the i button.
Using reset settings
This resets the camera to the factory default settings. You can also reset the
camera to the [RESET1] or [RESET2] setting.
6
1 Select [CUSTOM RESET] in shooting menu W(P. 106).
2 Select [RESET], [RESET1], or [RESET2] and press the i
button.
•
[RESET]: Resets to the factory default settings. For
RESET1
the default settings, see “Menu directory” (P. 106).
•
[RESET1]/[RESET2]: Resets to the registered set-
tings.
YES
NO
3 Use FG to select [YES], then press the
i button.
BACK
SET
# Caution
• The following settings are unaffected. For defaults, see “Menu directory” (P. 106).
RESET1, RESET2 (CUSTOM RESET)/PICTURE MODE/X/W/s/MY MODE
SETUP/VIDEO OUT/ISO-AUTO/WB/EDIT FILENAME/dpi SETTING/EXPOSURE
SHIFT/8WARNING LEVEL
70 EN
Customizing camera settings
7
Custom Menu
Use the Custom Menu to customize camera settings.
„ Menu categories
Settings in the Custom Menu are divided into the following 10 categories:
AF/MF
(P. 72)
(P. 72)
(P. 73)
(P. 73)
(P. 75)
(P. 75)
(P. 76)
(P. 77)
(P. 78)
(P. 78)
#CUSTOM
K/COLOR/WB
RECORD/ERASE
MOVIE
R
S
T
U
V
W
X
Y
Z
b
BUTTON
RELEASE
DISP/8/PC
EXP/e/ISO
KUTILITY
„ Displaying the Custom Menu
Before changing settings in the Custom Menu, display the [c] (Custom Menu) tab by
selecting [ON] for the [cMENU DISPLAY] option in the setup menu.
1 Press the MENU button to display the menus.
’10.02.01
X
W
14:01
d
2 Select the setup menu tab (P. 69) using
7
ENG.
FG and press I.
j±0
k±0
s
REC VIEW
5SEC
3 Select [cMENU DISPLAY] using FG and
c
MENU DISPLAY OFF
FIRMWARE
BACK
press I.
SET
4 Select [ON] using FG and press the i button.
•
The [c] tab is displayed.
[c] tab
’10.02.01
c
MENU DISPLAY
ON
X
W
14:01
ENG.
j
±0
k±0
s
i
REC VIEW
5SEC
ON
c
MENU DISPLAY
FIRMWARE
BACK
SET
BACK
SET
EN 71
Custom Menu options
RAF/MF
c
R
MENU
Option
Description
g
P. 44
P. 45
AF MODE
Choose the AF mode.
Choose the AF target mode.
AF AREA
RESET LENS
When set to [ON], this resets the focus of the lens
(infinity) each time the power is turned off.
—
BULB
FOCUSING
Normally focus locks during the exposure when manual
focus (MF) is selected. Select [ON] to allow focusing
using the focus ring.
—
FOCUS RING
You can customize
how the lens adjusts
to the focal point
by selecting the
rotational direction
of the focus ring.
Near Near
)
)
—
MF ASSIST
Select [ON] to automatically magnify the image for
precise focus when the focus ring is rotated in manual
focus mode.
—
—
Choose the AF target position that will be saved as the
home position. pappears in the AF target selection
display while you choose a home position.
PSET HOME
7
c
S
MENU
SBUTTON
Option
Description
Assign focus or AE lock to the <or R (movie) button.
g
AEL/AFL
P. 79
AEL/AFL MEMO If [ON] is selected, exposure will remain locked after the
<or R (movie) is released. Exposure lock ends when
the button is pressed a second time.
—
;FUNCTION
Following functions can be assigned to the <or R
(movie) button:
P. 80
Fn FACE DETECT, PREVIEW, V, PHOME, MF,
RAWK, TEST PICTURE, MY MODE, I/H,
AEL/AFL, R REC, BACKLIT LCD
R FUNCTION
72 EN
c
S
MENU
SBUTTON
Option
Description
g
MY MODE
SETUP
When [MY MODE] (P. 80) is assigned to the <button,
frequently-used settings can be recalled by pressing the
<button. See page 104 for information on the settings
that can be saved using My Mode.
Saving My Mode Settings
1) Select [MY MODE1] or [MY MODE2] and press
I.
i
2) Select [SET] and press the
button.
—
Recalling My Mode Settings
1) Select [MY MODE1] or [MY MODE2] and press
the i button.
2) Select [YES] and press the i button.
•
•
The selected My Mode is set.
When shooting, press the shutter button while
holding down the <button.
BUTTON TIMER
If [3 SEC], [5 SEC], or [8 SEC] is selected, settings can
be adjusted for 3, 5, or 8 seconds after the F, P,
#, or jYbutton is released. If [HOLD] is selected,
settings can be adjusted until the button is pressed a
second time.
—
7
c
T
MENU
TRELEASE
Option
Description
g
If [ON] is selected, the shutter can be released even
when the camera is not in focus. This option can be set
separately for S-AF (P. 44) and C-AF (P. 44) modes.
RLS PRIORITY S
RLS PRIORITY C
—
c
U
MENU
UDISP/8/PC
Option
Description
g
HDMI
Selecting the digital video signal format for connecting
to a TV via an HDMI mini-cable. Choose [1080i] or
[720p] to automatically select 1080i or 720p output
where supported. Select [480p/576p] for 480p/576p
output; note however that when [PAL] is selected for
[VIDEO OUT] pictures will be displayed in 576p only.
Choose a setting that matches the television video input
setting.
P. 67
P. 67
VIDEO OUT
You can select [NTSC] or [PAL] according to your TV’s
video signal type.
EN 73
c
U
UDISP/8/PC
MENU
Option
SLEEP
Description
g
The camera will enter sleep (standby) mode to reduce the
drain on the battery if no operations are performed for the
specified period. [OFF] cancels the sleep mode. Pressing
a button such as the shutter button reactivates the camera.
—
—
LIVE VIEW
BOOST
If [ON] is selected, the camera will adjust display
brightness automatically. Changes to exposure
compensation are not reflected in the monitor.
g FACE
DETECT
When set to [ON], the camera will detect people’s faces
and automatically adjust the focus there.
The camera will automatically zoom in on faces detected
during playback.
P. 32
G/INFO
SETTING
[qINFO]: Choose the information displayed when the
INFO button is pressed in playback mode.
[LV-INFO]: Choose the information displayed when the
INFO button is pressed during live view. To choose
a framing guide from [w], [x], [y], or [X], select
P. 33,
60
[DISPLAYED GRID] and press
[GSETTING]: Choose whether index and calendar
.
I
playback can be accessed by pressing G.
[iAUTO]: Choose the information displayed when the mode
dial is rotated to Afrom live guide (P. 18), live control
(P. 20), super control panel (P. 81), or none.
KCONTROL
SETTING
[P/A/S/M]: Choose the information displayed when the
mode dial is rotated to P, A, S, or Mfrom live control
(P. 20), super control panel (P. 81), or none.
7
—
[ART/SCN]: Choose the information displayed when the
mode dial is rotated to ART or SCN from live control
(P. 20), super control panel (P. 81), or none.
HISTOGRAM
SETTING
[HIGHLIGHT]: Choose the tone range indicated by a red
highlight (overexposure) warning display when the highlight
and shadow display is selected in playback mode.
[SHADOW]: Choose the tone range indicated by a blue
shadow (underexposure) warning display when the highlight
and shadow display is selected in playback mode.
P. 61
EVF ADJUST
[j]: Adjust the color temperature of the electronic view
finder display.
[k]: Adjust the brightness of the electronic view finder
P. 100
display.
BACKLIT LCD Choose how long the backlight remains lit. Choose [HOLD]
—
to prevent the backlight from turning off automatically.
MODE GUIDE Choose [ON] to display help for the selected mode when
P. 10
the mode dial is rotated to a new setting.
qCLOSEUP
MODE
[mode1]: Press Uto zoom in (to a maximum of 14×) and
press Gto zoom out. Use the arrow pad to view other
areas of the image after zooming in.
P. 14,
60
[mode2]: Press the Ubutton to display a zoom frame.
74 EN
c
U
UDISP/8/PC
MENU
Option
Description
g
When set to [OFF], you can turn off the beep sound that is
emitted when the focus locks by pressing the shutter button.
8(Beep
sound)
—
VOLUME
USB MODE
Adjust speaker volume.
Choose a mode for connecting the camera to a
computer or printer.
P. 58, 62
P. 84, 87
c
V
MENU
VEXP/e/ISO
Option
Description
g
EV STEP
Choose the size of the increments used when selecting
shutter speed, aperture, exposure compensation, and
other exposure parameters.
P. 40,
48–49
METERING
AEL Metering
Choose a metering mode according to the scene.
In the cases of center-weighted and spot metering, the
metered area is indicated by a frame.
Choose the metering mode used when the <or R
(movie) button is pressed to lock exposure. Choose
[AUTO] to use the mode selected for [METERING].
Set ISO sensitivity.
P. 47
P. 80
ISO
ISO STEP
P. 41
P. 41
Select the increments available for choosing ISO sensitivity.
ISO-AUTO SET Choose the upper limit and default value used for ISO
sensitivity when [AUTO] is selected for [ISO].
[HIGH LIMIT]: Choose the upper limit for auto ISO
sensitivity selection.
P. 41
7
[DEFAULT]: Choose the default value for auto ISO
sensitivity selection.
ISO-AUTO
You can set the shooting mode in which the ISO [AUTO]
is activated.
[P/A/S]: Auto ISO sensitivity selection is available in all
modes except M. ISO sensitivity is fixed at ISO 200 in
mode M.
P. 41
P. 39
—
[ALL]: Auto ISO sensitivity selection is available in all modes.
You can set the maximum time for bulb shooting.
Choose the delay between the shutter button being
pressed and the shutter being released. This diminishes
camera shake caused by vibrations.This feature is
useful in situations such as microscope photography
and astrophotography. It is also useful for sequential
shooting (P. 30) and self timer photography (P. 30).
BULB TIMER
ANTI-SHOCK
z
c
W
MENU
W#CUSTOM
Option
Description
g
Choose the shutter speed used when the flash fires.
Choose the slowest shutter speed available when a
flash is used.
P. 102
#X-SYNC.
#SLOW LIMIT
P. 102
When set to [ON], it will be added to the exposure
compensation value and flash intensity control will be
performed.
w+F
P. 40, 55
EN 75
c
X
MENU
XK/COLOR/WB
Option
Description
g
NOISE REDUCT. This function reduces the noise that is generated during
long exposures.
[AUTO]: Long exposure noise reduction activates
automatically at slow shutter speeds.
[ON]: Noise reduction is performed with every shot.
[OFF]: Noise reduction off.
• When active, noise reduction approximately doubles
shooting times.
P. 39
• Noise reduction turns off automatically during
sequential shooting.
• This function may not work effectively with some
shooting conditions or subjects.
NOISE FILTER
Choose the amount of noise reduction performed at
high ISO sensitivities.
—
WB
Choose the white balance mode.
P. 42
[ALL SET]: Use the same white balance compensation
in all modes except [CWB].
[ALL RESET]: Set white balance compensation for all
modes except [CWB] to 0.
ALL >
P. 42
—
COLOR SPACE
You can select how colors are reproduced on the
monitor or printer.
SHADING COMP. Choose [ON] to correct peripheral illumination according
to the type of lens. This is particularly effective with wide
angle lenses.
7
• Compensation is not available for teleconverters or
extension tubes.
—
• Noise may be visible at the edges of photographs
taken at high ISO sensitivities.
The record mode for JPEG photographs can be
selected from four combinations of image size and
compression rate. The camera offers a choice of three
sizes and four compression rates for each combination.
You can also choose the pixel count for X- and W-size
images (P. 77).
KSET
Modifying JPEG record modes
1) Use HI to select
P. 31
K
SET
a combination
(K1–K4)
and use FG to
change.
1
2
3
4
Y
SF
X
F
W
N
W
SF
PIXEL COUNT
BACK
Yarge
2) Press i.
SET
Number of pixels
Compression rate
76 EN
c
X
XK/COLOR/WB
MENU
Option
Description
g
PIXEL COUNT
Choose the pixel count for X- and W-size images.
Choosing a pixel count
1) Select [PIXEL COUNT] in the cCustom Menu
(P. 71) Xtab.
2) Select Xor Wand
PIXEL COUNT
press I.
X
iddle
mall
2560x1920
1280x960
W
P. 31
BACK
SET
3) Choose a pixel count
PIX
X
iddle
and press i.
X
iddle
mall
3200x2400
W
2560x1920
1600x1200
BACK
SET
7
c
Y
MENU
YRECORD/ERASE
Option
Description
g
QUICK ERASE
If [ON] is selected, pressing the D button in the playback
P. 15
display will immediately delete the current image.
RAW+JPEG
ERASE
Choose the action performed when a photograph
recorded at a setting of RAW+JPEG is erased in single-
frame playback (P. 15).
[JPEG]: Only the JPEG copy is erased.
[RAW]: Only the RAW copy is erased.
[RAW+JPEG]: Both copies are erased.
P. 31
• [ALL ERASE] (P. 66) and [ERASE SELECTED]
(P. 66) delete both RAW and JPEG copies.
FILE NAME
[AUTO]: Even when a new card is inserted, the file
numbers are retained from the previous card. File
numbering continues from the last number used or from
the highest number available on the card.
[RESET]: When you insert a new card, the folder
numbers starts at 100 and the file name starts at 0001.
If a card containing images is inserted, the file numbers
start at the number following the highest file number on
the card.
—
—
EDIT FILENAME Edit the file name.
EN 77
c
Y
g
—
YRECORD/ERASE
MENU
Option
Description
PRIORITY SET
Choose the default selection ([YES] or [NO]) for
confirmation dialogs.
dpi SETTING
Choose the print resolution.
[AUTO]: Print resolution is selected automatically
according to image size.
—
[CUSTOM]: Choose a custom print resolution. Press I
to display the setting screen.
c
Z
MENU
ZMOVIE
Option
Description
Choose a movie record mode.
g
P. 56
nMODE
MOVIE+STILL
Choose [ON] to record a photograph when movie
recording ends.
P. 58
P. 57
Choose [OFF] to record silent movies.
MOVIE R
c
b
MENU
K
b
UTILITY
Option
Description
g
PIXEL MAPPING The pixel mapping feature allows the camera to
check and adjust the image pickup device and image
processing functions.
P. 94
7
EXPOSURE
SHIFT
Adjust optimal exposure separately for each metering
mode.
• Optimal exposure can be adjusted by up to ±1/3
EV. The range of exposures available in the
selected direction (positive or negative) will be
correspondingly reduced.
—
• The effects of exposure shift are not visible in
the monitor. To make normal adjustments to the
exposure, perform exposure compensation (P. 40).
8 WARNING
LEVEL
Choose when the low battery indicator (
• Charge the battery when the 9 indicator blinks.
) is displayed.
8
P. 6
78 EN
c
S
„ AEL/AFL
MENU
[AEL/AFL]
If [AEL/AFL] is selected for [;FUNCTION] (P. 80) or [R FUNCTION] (P. 80),
the <or R (movie) button can be used to set focus or exposure instead of the
shutter button.
Select the function of the button to match the operation
S-AF AEL/AFL
when the shutter button is pressed. Choose an
operating mode ([mode1]–[mode3], or in C-AF mode
[mode1]–[mode4]) for the different focus modes.
mode 1
HALF WAY AEL/S-AF
FULLY
AEL
EXPOSURE
SET
AEL
AFL
BACK
<button or
Shutter button function
Half-press Full press
R (movie) button
function
Mode
When holding down
AEL/AFL
Focus Exposure Focus Exposure Focus Exposure
S-AF mode1
mode2
S-AF
S-AF
–
Locked
–
Locked
–
–
–
–
–
Locked
Locked
–
Locked
Locked
–
Locked
–
–
Locked
–
mode3
–
Locked
Locked
Locked
Locked
–
S-AF
–
–
C-AF mode1 C-AF start Locked
mode2 C-AF start
–
mode3
mode4
mode1
mode2
mode3
–
–
–
–
–
Locked
–
Locked
–
C-AF start
Locked C-AF start
–
7
MF
–
Locked
–
–
–
Locked
Locked
–
–
–
Locked
S-AF
EN 79
;
„
FUNCTION, R FUNCTION
c
S
;
FUNCTION]/[RFUNCTION]
MENU
[
The following functions can be assigned to the <or R (movie) button:
Fn FACE
DETECT
Pressing the <or R (movie) button selects [ON] for [g FACE
DETECT]; press the <or R (movie) button again to turn it off
(P. 32, 74).
PREVIEW
(electronic)
Press and hold the <or R (movie) button to stop aperture down
to the selected value and preview depth of field (P. 37).
V
Press the <or R (movie) button to measure white balance
(P. 43).
PHOME
Press the <or R (movie) button to select the home AF target
position saved with [PSET HOME] (P. 72). The home AF target
position is indicated by a picon. Press the button again to return
to AF target mode. If the camera is turned off when the home
position is selected, the home position will be reset.
MF
Press the <or R (movie) button to select [MF] for AF mode.
Press the button again to restore the previously selected AF
mode.
RAW K
Press the <or R (movie) button to toggle between JPEG and
RAW+JPEG record modes.
TEST PICTURE To take a photograph and display it in the monitor without
recording it to the card, press the shutter button while the <or R
(movie) button is pressed.
7
MY MODE
Pictures taken while the <or R (movie) button is pressed will be
shot at the settings selected for [MY MODE SETUP] (P. 73).
I/H
Press the <or R (movie) button to toggle between I and H
when the waterproof protector is attached.
AEL/AFL
Press the <or R (movie) button to lock focus and exposure.
R REC
Press the <or R (movie) button to record a movie. If this option
has not been assigned to either button, movies can be recording
using the shutter button.
BACKLIT LCD
OFF
Press the <or R (movie) button to turn the monitor off. This is
useful when you are using the electronic view finder. Press the
button again to turn the monitor on.
No function is assigned to the <or R (movie) button.
80 EN
Using the super control panel
The term “super control panel” refers to the display shown below, which lists
shooting settings together with the option currently selected for each.
To use the super control panel, select [ON] for [KCONTROL SETTING] >
[SCP] (P. 74). To choose between the live control, super control panel, and other
displays, press the i button while the camera is in shooting mode and press the
INFO button to cycle through the different displays
6
7
8
9
1
2
ISO
3
4
5
NORM
OFF
4:3
mall
Super Fine
0
P
250 F5.6 +2.0
38
e
d
c
ba 0
„ Settings that can be modified using super control panel
Gradation z..............................P. 53
1 Currently selected option
B&W Filter x.............................P. 53
2 ISO sensitivity ............................P. 41
3 Sequential shooting/self-timer....P. 30
4 Flash mode ................................P. 54
5 Flash intensity control ................P. 55
6 White balance ............................P. 41
White balance compensation.....P. 42
7 Picture mode..............................P. 52
Picture tone y...........................P. 53
9 Color space................................P. 76
0 Face detection .....................P. 32, 74
a Metering mode...........................P. 47
b Aspect ratio................................P. 32
c Record mode..............................P. 31
7
d AF mode.....................................P. 44
AF target ....................................P. 45
e Image stabilizer..........................P. 50
8 Sharpness N.............................P. 53
Contrast J.................................P. 53
Saturation T.............................P. 53
# Caution
• Movie record mode is not displayed.
1 While the super control panel is
ISO
displayed, use FGHI to select
Cursor
the desired setting.
NORM
OFF
4
:3
mall
Super Fine
P
250 F5.6
38
2 Change the highlighted setting using the
METERING
i button.
•
•
Repeat steps 1 and 2 as necessary.
NORM
OFF
The selected settings take effect automatically if no
operations are performed for a few seconds.
4
:3
mall
Super Fine
P
250 F5.6
38
3 Press the shutter button halfway to return
to shooting mode.
EN 81
Printing pictures
8
Print reservation (DPOF)
You can save digital “print orders” to the memory card listing the pictures to be
printed and the number of copies of each print. You can then have the pictures
printed at a print shop that supports DPOF or print the pictures yourself by
connecting the camera directly to a DPOF printer. A memory card is required
when creating a print order.
# Caution
• The camera can not be used to modify print orders created with other devices.
Creating a new print order deletes any existing print orders created with other
devices.
• Not all functions may be available on all printers or at all photo labs.
• Print orders can not include RAW images or movies.
• When requesting prints without a digital print order, specify the file number.
Requesting prints by frame number may result in the wrong pictures being printed.
DPOF
DPOF (Digital Print Order Format) is a standard for recording the data that a printer
or print service requires to automatically print pictures.
Creating a print order
8
m
1 Press i during playback and select [<].
2 Select [<] or [U] and press i.
EDIT
<
RESET PROTECT
3 Add pictures to the print order.
BACK
SET
Individual pictures
PRINT ORDER SETTING
Press HI to select the frame that you want to set as
print reservation, then press FG to set the number
of prints.
<
U
•
To set print reservation for several pictures, repeat
this step.
BACK
SET
All pictures
Select [U] and press the i button.
4 Press the i button when you have finished.
5 Select the date and time format and press the i button.
82 EN
The pictures are printed without the date and
time.
X
NO
NO
DATE The pictures are printed with the shooting date.
TIME The pictures are printed with the shooting time.
DA
T
E
TIME
BACK
SET
6 Select [SET] and press the i button.
Resetting the print reservation data
You can reset all print reservation data or just the data for selected pictures.
1 Press i during playback and select [<].
i
2 Select [<] and press
.
i
3 Select [KEEP] and press the
button.
•
To remove all pictures from the print order, select [RESET] and press i.
4 Use HI to select the frame with print reservation data you
want to reset, then press G to set the number of prints to 0.
5 Press the i button when you have finished.
6 Select the date and time format and press the i button.
•
This setting is applied to all frames with print reservation data.
8
7 Select [SET] and press the i button.
Direct printing (PictBridge)
By connecting the camera to a PictBridge-compatible printer with the USB cable,
you can print out recorded pictures directly. To find out if your printer is compatible
with PictBridge, refer to the printer's manual.
PictBridge
The standard that enables digital cameras and printers made by different
manufacturers to be connected, and also allows pictures to be printed directly
from the camera.
STANDARD
All printers that support PictBridge have standard print settings. By selecting
[STANDARD] on the settings screens (P. 85), you can print pictures according to
these settings. For details on your printer's standard settings, refer to the printer's
manual or contact the printer manufacturer.
# Caution
• Use a fully charged battery for printing.
EN 83
• Images recorded in RAW data cannot be printed.
• You cannot print movie images.
• The camera will not enter sleep mode while it is connected to the USB cable.
Connecting the camera to a printer
Use the provided USB cable to connect the camera to a PictBridge-compatible
printer.
1 Turn the printer on and connect the camera's multi-connector to
the printer's USB port with the USB cable.
•
For details on how to turn the printer on and the position of the USB port, refer
to the printer's manual.
Multi-connector
Smaller terminal
USB cable
Look for this mark.
USB port
2 Turn on the camera.
•
The selection screen for the USB connection is displayed.
8
USB
3 Use FG to select [PRINT].
STORAGE
MTP
•
[ONE MOMENT] is displayed and the camera and
printer are connected. Go to “Custom printing” (P. 85).
PRINT
EXIT
# Caution
• If the screen is not displayed after a few minutes,
disconnect the USB Cable and start again from Step 1.
SET
Easy printing
1 Use HI to display the pictures you want
to print on the camera.
•
Display the image you want to print on the camera
and connect the camera with a printer using a USB
cable.
EASY PRINT START
PC/CUSTOM PRINT
2 Press I.
•
The picture selection screen appears when printing is completed. To print an-
other picture, use HI to select the image and press the i button.
•
To exit, unplug the USB cable from the camera while the picture selection
screen is displayed.
84 EN
Custom printing
1 Follow the operation guide to set a print option.
Selecting the print mode
PRINT MODE SELECT
PRINT
Select the type of printing (print mode). The available
print modes are as shown below.
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER
EXIT
SET
PRINT
Prints selected pictures.
Prints all the pictures stored in the card and makes one print for
each picture.
ALL PRINT
Prints multiple copies of one image in separate frames on a
single sheet.
MULTI PRINT
ALL INDEX
Prints an index of all the pictures stored in the card.
Prints according to the print reservation you made. If there is no
picture with print reservation, this is not available.
PRINT ORDER
Setting the print paper items
PRINTPAPER
This setting varies with the type of printer. If only the
printer’s STANDARD setting is available, you cannot
change the setting.
SIZE
BORDERLESS
STANDARD
STANDARD
8
BACK
SET
SIZE
Sets the paper size that the printer supports.
Selects whether the picture is printed on the entire page or
inside a blank frame.
BORDERLESS
Selects the number of pictures per sheet. Displayed when you
have selected [MULTI PRINT].
PICS/SHEET
EN 85
Selecting pictures you want to print
Select pictures you want to print. The selected pictures
can be printed later (single-frame reservation) or the
picture you are displaying can be printed right away.
123-3456
15
SELECT
SINGLE PRINT
PRINT
MORE
Prints the currently displayed picture. If there is a picture that
[SINGLE PRINT] reservation has already been applied to, only
that reserved picture will be printed.
PRINT(f)
Applies print reservation to the currently displayed picture. If
you want to apply reservation to other pictures after applying
[SINGLE PRINT], use HI to select them.
Sets the number of prints and other items for the currently
displayed picture, and whether or not to print it. For operation,
refer to “Setting printing data” in the next section.
SINGLE PRINT(t)
MORE(u)
Setting printing data
PRINT INFO
<
x
1
Select whether to print printing data such as the date
and time or file name on the picture when printing.
When the print mode is set to [ALL PRINT] and
[OPTION SET] is selected, the following options
appears.
DATE
WITHOUT
WITHOUT
FILE NAME
P
BACK
SET
Sets the number of prints.
Prints the date and time recorded on the picture.
<×
DATE
8
FILE NAME
Prints the file name recorded on the picture.
Trims the picture for printing. Set the trimming size with the Uor
Gbutton and the trimming position with FGHI.
P
2 Once you have set the pictures for printing and printing data,
select [PRINT], then press the i button.
•
To stop and cancel printing, press the i button. To resume printing, select
[CONTINUE].
„ Cancelling printing
To cancel printing, highlight [CANCEL] and press i. Note that any changes to the
print order will be lost; to cancel printing and return to the previous step, where you can
make changes to the current print order, press MENU.
86 EN
Connecting the camera to a computer
9
Your camera supports the USB Mass Storage Class. You can transfer images
to a computer by connecting the camera to the computer with the provided USB
cable. The following operating systems are compatible with the USB connection:
Windows: Windows 2000 Professional/Windows XP Home Edition/
Windows XP Professional/Windows Vista/Windows 7
Macintosh: Mac OS X version 10.3 or later
Connecting the camera to a computer
1 Turn the camera off and connect it to the computer.
•
The location of the USB port varies with the computer. For details, refer to your
computer's manual.
Multi-connector
Smaller terminal
USB cable
Look for this mark.
USB port
9
2 Turn on the camera.
•
The selection screen for the USB connection is displayed.
USB
3 Press FG to select [STORAGE]. Press
STORAGE
MTP
the i button.
PRINT
EXIT
4 The computer recognizes the camera as a
new device.
SET
# Caution
• If your computer is running Windows Vista, select [MTP] in Step 3 to use Windows
Photo Gallery.
• Data transfer is not guaranteed in the following environments, even if your computer
is equipped with a USB port.
•
•
Computers with a USB port added by means of an extension card, etc.
Computers without a factory-installed OS and home-built computers
• When the camera is connected to the computer, none of the camera buttons are
functional.
EN 87
Installing the supplied computer software (ib)
After checking the system requirements, follow the instructions below to connect
the camera to a computer and install the supplied computer software (ib). For
information on using the computer software (ib), see the software’s online help.
System requirements: Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
1 Insert the supplied CD in a CD-ROM drive.
•
A setup screen will appear on the computer monitor.
# Caution
•
If the setup window is not displayed, select “My Computer” (Windows XP) or
“Computer” (Windows Vista/Windows 7) from the start menu. Double-click the
icon for the CD-ROM drive to open the setup CD window and then double-click
“CameraInitialSetup.exe”.
2 Connect the camera to the computer.
3 Follow the on-screen instructions on your computer.
9
88 EN
Shooting tips and maintenance
10
Shooting tips and information
The camera does not turn on even when a battery is loaded
The battery is not fully charged
• Charge the battery with the charger.
The battery is temporarily unable to function because of the cold
• Battery performance declines in low temperatures, and the charge may not be
sufficient to turn on the camera. Remove the battery and warm it by putting it in your
pocket for a while.
No picture is taken when the shutter button is pressed
The camera has turned off automatically
• To save battery power, if there is no operation, the camera goes into sleep mode
after a fixed period of time and the camera stops operating. The camera activates
again when you touch the shutter button or any other button. g “SLEEP” (P. 74)
After a further fixed period of time has elapsed, the camera power turns off.
The flash is charging
• On the LCD monitor, the #mark blinks when charging is in progress. Wait for the
blinking to stop, then press the shutter button.
Unable to focus
• When the AF confirmation mark on the LCD monitor is blinking, it indicates that the
camera is unable to focus using AF. Press the shutter button again.
10
Noise reduction is activated
• When shooting night scenes, shutter speeds are slower and noise tends to appear
in images. The camera activates the noise-reduction process after shooting
at slow shutter speeds. During which, shooting is not allowed. You can set
[NOISE REDUCT.] to [OFF]. g“NOISE REDUCT.” (P. 76)
The date and time has not been set
The camera is used with the settings at the time of purchase
• The date and time of the camera is not set when purchased. Set the date and time
before using the camera. g“Setting the date/time” (P. 7)
The battery has been removed from the camera
• The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 1 day. The settings will be
cancelled more quickly if the battery was only loaded in the camera for a short time
before being removed. Before taking important pictures, check that the date and
time settings are correct.
EN 89
Subjects that are difficult to focus on
It may be difficult to focus with auto focus in the following situations.
AF confirmation
mark is blinking.
These subjects
are not focused.
Subject with low
contrast
Excessively bright
light in center of
frame
Subject with
repeated patterns
AF confirmation
mark lights up but
the subject is not
focused.
Subjects at different
distances
Fast-moving subject
Subject not inside
AF area
In any situation, focus on something with high contrast that is at the same distance as
the subject, determine the composition and shoot the picture. g“Focus lock” (P. 46)
Image taken appears whitish
This may occur when the picture is taken in backlight or semi-backlight conditions.
This is due to a phenomenon called flare or ghosting. As far as possible, consider a
composition where strong light source is not taken in the picture. Flare may occur even
when a light source is not present in the picture. Use a lens hood to shade the lens
from the light source. If a lens hood does not have effect, use your hand to shade the
lens from the light. g“Interchangeable lenses” (P. 97)
Unknown bright dot(s) appear on the subject in the picture taken
This may be due to stuck pixel(s) on the image pickup device. Perform [PIXEL
MAPPING]. If the problem persists, repeat pixel mapping a few times. g“Pixel
mapping - Checking the image processing functions” (P. 94)
10
Functions that cannot be selected from menus
Some items may not be selectable from the menus when using the arrow pad.
• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:
Combination of [j] and [NOISE REDUCT.], etc.
Camera vibration when the power is turned off
This is due to the camera initializing the image stabilizer mechanism. Without this
initialization, the image stabilizer may not be able to achieve the proper effect.
Set functions are restored to their factory default settings
When you rotate the mode dial or turn off the power in a shooting mode other than P,
A, S, or M, functions with changes made to their settings are restored to the factory
default settings.
90 EN
Error codes
Monitor
indication
Possible cause
Corrective action
The card is not inserted, or it
cannot be recognized.
Insert a card or insert a different
card.
NO CARD
Insert the card again. If the
problem persists, format the
card. If the card cannot be
formatted, it cannot be used.
There is a problem with the
card.
CARD ERROR
WRITE PROTECT
The card write-protect switch is
Writing to the card is prohibited. set to the “LOCK” side. Release
the switch. (P. 95)
• The card is full. No more
pictures can be taken or no
more information such as print
Replace the card or erase
unwanted pictures.
Before erasing, download
reservation can be recorded.
CARD FULL
• There is no space in the card
important images to a PC.
and print reservation or new
images cannot be recorded.
• Select [CLEAN CARD], press
the i button and turn off the
camera. Remove the card and
wipe dry the metallic surface
CARD SETUP
Clean the contact area of
the card with a dry cloth.
with a soft, dry cloth.
Card cannot be read. Card may
CLEAN CARD
FORMAT
not have been formatted.
• Select [FORMAT]ꢀ[YES], and
then press the i button to
format the card. Formatting
the card erases all data on
the card.
SET
10
There are no pictures on the
card.
The card contains no pictures.
Record pictures and play back.
NO PICTURE
The selected picture cannot be
displayed for playback due to
a problem with this picture. Or
the picture cannot be used for
playback on this camera.
Use image processing software
to view the picture on a PC.
If that cannot be done, the image
file is damaged.
PICTURE ERROR
Pictures taken with another
camera cannot be edited on this
camera.
Use image processing software
to edit the picture.
THE IMAGE
CANNOT BE
EDITED
EN 91
Monitor
indication
Possible cause
Corrective action
Turn off the camera and wait for
the internal temperature to cool.
m
The internal temperature of
the camera has risen due to
sequential shooting.
Wait a moment for the camera
to turn off automatically. Allow
the internal temperature of the
camera to cool before resuming
operations.
Internal camera
temperature is
too high.
Please wait for
cooling before
camera use.
The battery is drained.
Charge the battery.
BATTERY
EMPTY
The camera is not connected to Disconnect the camera and
the computer or printer correctly. connect it again correctly.
NO
CONNECTION
There is no paper in the printer. Load some paper in the printer.
NO PAPER
Replace the ink cartridge in the
The printer has run out of ink.
printer.
NO INK
The paper is jammed.
Remove the jammed paper.
JAMMED
The printer's paper cassette has
been removed or the printer has
been manipulated while making
settings on the camera.
Do not manipulate the printer
while making settings on the
camera.
SETTINGS
CHANGED
10
Turn off camera and printer.
Check the printer and remedy
any problems before turning the
power on again.
There is a problem with the
printer and/or camera.
PRINT ERROR
Pictures recorded on other
cameras may not be printed on
this camera.
Use a personal computer to
print.
CANNOT PRINT
The lens is
locked. Please
extend the lens.
The lens of the retractable lens
stays retracted.
Extend the lens.
An abnormality has occurred
between the camera and the
lens.
Turn off the camera, check the
connection with the lens, and
turn the power on again.
Please check the
status of a lens.
92 EN
Cleaning and storing the camera
Cleaning the camera
Turn off the camera and remove the battery before cleaning the camera.
Exterior:
• Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy
water and wring well. Wipe the camera with the damp cloth and then dry it with a dry
cloth. If you have used the camera at the beach, use a cloth soaked in clean water
and well wrung.
LCD monitor:
• Wipe gently with a soft cloth.
Lens:
• Blow dust off the lens with a commercially available blower. For the lens, wipe
gently with a lens cleaning paper.
Storage
• When not using the camera for a prolonged period, remove the battery and card.
Store the camera in a cool, dry place that is well ventilated.
• Insert the battery periodically and test the camera's functions.
Cleaning and checking the image pickup device
This camera incorporates a dust reduction function to keep dust from getting on
the image pickup device and to remove any dust or dirt from the image pickup
device surface with ultrasonic vibrations. The dust reduction function operates
when the camera is turned on.
The dust reduction function operates at the same time as the pixel mapping,
which checks the image pickup device and image processing circuitry. Since dust
reduction is activated every time the camera's power is turned on, the camera
should be held upright for the dust reduction function to be effective.
10
# Caution
• Do not use strong solvents such as benzene or alcohol, or a chemically treated
cloth.
• Avoid storing the camera in places where chemicals are treated, in order to protect
the camera from corrosion.
• Mold may form on the lens surface if the lens is left dirty.
• Check each part of the camera before use if it has not been used for a long time.
Before taking important pictures, be sure to take a test shot and check that the
camera works properly.
EN 93
Pixel mapping - Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the image
pickup device and image processing functions. After using the monitor or taking
continuous shots, wait for at least one minute before using the pixel mapping
function to ensure that it operates correctly.
1 Select [PIXEL MAPPING] in cCustom Menu (P. 71) tab
.
b
2 Press I, then press the i button.
•
The [BUSY] bar is displayed when pixel mapping is in progress. When pixel
mapping is finished, the menu is restored.
# Caution
• If you accidentally turn the camera off during pixel mapping, start again from Step 1.
10
94 EN
Information
11
Card basics
Usable cards
“Card” in this manual refers to a recording medium. The only
cards usable with this camera are SD memory cards and
SDHC memory cards (sold separately) which conform to
the SD standard. For the latest information, please visit the
Olympus website.
SD card write protect switch
The SD card body has a write protect switch. If you set the switch
to the “LOCK” side, you will not be able to write to the card, delete
data or format. Return the switch to enable writing.
LOCK
# Caution
• The data in the card will not be erased completely even after formatting the card or
deleting the data. When discarding, destroy the card to prevent leakage of personal
information.
Formatting the card
Cards formatted on a computer or other camera must be formatted with the
camera before they can be used.
All data stored on the card, including protected images, is erased when the card
is formatted. When formatting a used card, confirm there are no images that you
still want to keep on the card.
11
CARD SETUP
1 Select [CARD SETUP] in shooting menu W
(P. 106).
ALL ERASE
2 Select [FORMAT].
FORMAT
3 Select [YES] and press i.
BACK
SET
•
Formatting is performed.
EN 95
Battery and charger
• Use the single Olympus lithium-ion battery (BLS-1). Other batteries cannot be used.
• The camera’s power consumption varies widely with usage and other conditions.
• As the following consume a lot of power even without shooting, the battery will be
drained quickly.
•
Performing auto focus repeatedly by pressing the shutter button halfway in
shooting mode.
•
•
Displaying images on the LCD monitor for a prolonged period.
When connected to a computer or printer.
• When using a drained battery, the camera may turn off without the low battery
warning being displayed.
• The battery will not be fully charged at the time of purchase. Charge the battery
using the provided charger (BCS-1) before use.
• The normal charging time using the provided charger is approximately 3 hours 30
minutes (estimated).
• Do not use chargers other than the one designated.
# Caution
• There is a risk of explosion if the battery is replaced with the incorrect battery
type. Dispose of the used battery following the instructions. “Battery Handling
Precautions” (P. 112)
Using your charger abroad
• The charger can be used in most home electrical sources within the range of 100V
to 240V AC (50/60Hz) around the world. However, depending on the country
or area you are in, the AC wall outlet may be shaped differently and the charger
may require a plug adapter to match the wall outlet. For details, ask at your local
electrical shop or travel agent.
• Do not use commercially available travel adaptors as the charger may malfunction.
11
96 EN
Interchangeable lenses
Select the lens that you want to shoot with.
Use a specified lens (Micro Four Thirds mount). To use the “Four Thirds System
Lens”, an adapter (sold separately) is required. An adapter to allow use of an OM
system lens is also available (sold separately).
M.ZUIKO DIGITAL interchangeable lenses
This is an interchangeable lens specifically for use with the “Micro Four Thirds
system” which is a smaller, thinner version of the “Four Thirds system”.
Focal length and depth of field of Micro Four Thirds system lenses
When compared to 35-mm cameras, Micro Four Thirds system cameras achieve
different effects at the same focal length and aperture.
Focal length
At the same focal length of a 35-mm camera, a Four Thirds system camera can
achieve a focal length equivalent to twice that of a 35-mm camera. This enables the
design of compact telephoto lenses. For instance, a Micro Four Thirds system lens
14–42 mm is equivalent to a 28–84 mm lens for a 35-mm camera.
• When the image angle of a Micro Four Thirds system lens is converted to that of
a 35-mm camera, the perspective is the same as that of a 35-mm camera.
Depth of Field
A Micro Four Thirds system camera can achieve a depth of field equivalent to two
times deeper than that of a 35-mm camera. A Micro Four Thirds system lens with
f/2.8 brightness, for example, is equivalent to f/5.6 when converted to the aperture of
a 35-mm camera.
• You can achieve the same amount of background blur as if you were using a
35-mm camera.
# Caution
11
• When you attach or remove the body cap and lens from the camera, keep the lens
mount on the camera pointed downward. This helps prevent dust and other foreign
matter from getting inside the camera.
• Do not remove the body cap or attach the lens in dusty places.
• Do not point the lens attached to the camera toward the sun. This may cause
the camera to malfunction or even ignite due to the magnifying effect of sunlight
focusing through the lens.
• Be careful not to lose the body cap and rear cap.
• Attach the body cap to the camera to prevent dust from getting inside when no lens
is attached.
EN 97
M.ZUIKO DIGITAL lens specifications
„ Names of parts
1Filter mount thread
2Zoom ring
3Focus ring
4Mount index
5Electrical contacts
6Front cap
7Rear cap
„ Lens and camera combinations
Lens
Camera
Attachment
AF
Metering
Micro Four Thirds
system lens
Yes
Yes
Yes
Micro Four Thirds
system camera
Four Thirds system lens
OM System lenses
Attachment
possible with
mount adapter
Yes*1
No
Yes
Yes*2
No
Micro Four Thirds
system lens
Four Thirds System
Camera
No
No
*1 [C-AF] and [C-AF+TR] of [AF MODE] cannot be used.
*2 Accurate metering not possible.
Micro Four Thirds system lenses and Micro Four Thirds system cameras
have the mark shown to the right.
„ Main Specifications
Items
14–42 mm L
17 mm
40–150 mm
Four Thirds
mount
11
Mount
Micro Four Thirds mount
Focal length
Max. aperture
Image angle
14–42mm
f/3.5–5.6
75.4°–28.9°
8 groups,
9 lenses
17mm
f/2.8
64.9°
4 groups,
6 lenses
40–150mm
f/4–5.6
30°–8.2°
9 groups,
12 lenses
Lens configuration
Multilayer film
coating (partially
single layered)
f/4–22
Multilayer film coating
Iris control
Shooting range
Focus adjustment
Weight (excluding hood and cap)
Dimensions
f/3.5–22
0.25 m–)
f/2.8–22
0.2 m–)
AF/MF switching
71 g
0.9 m–)
133 g
220 g
l65.5×72 mm
58 mm
l62×43.5 mm
40.5 mm
l57×22 mm
(Max. diameter × overall length)
Filter mount thread diameter
37 mm
98 EN
„ Storage Precautions
• Clean the lens after use. Remove dust and dirt on the surface of the lens with a
blower brush or brush. Use commercially available lens cleaning paper to remove
the dirt on the lens. Do not use organic solvents.
• Always cap the lens and store it when it is not used.
• Do not store in an area with insect repellent.
# Caution
• Edges of pictures may be cut off if more than one filter is used or if a thick filter is
used.
Four Thirds Adapter
„ Names of parts
1Front cap
2Rear cap
3Lens release button
4Mount index
5Electrical contacts
„ Mounting
11
EN 99
Using electronic view finder (sold separately)
If you use the electronic view finder (sold separately: VF-2), you can view the
shooting screen in the finder. This is convenient when you are in a very bright
location, such as under direct sunlight, where it is difficult to view the monitor,
or are using the camera at a low angle. Also refer to the electronic view finder’s
manual.
1 Turn off the camera.
2 Slide off the hot shoe cover.
•
Keep the shoe cover in a safe place to
avoid losing it.
3 Remove the connector cover from
the electronic view finder.
4 Align the electronic view finder with the hot shoe on the camera
body, and slide it in until it stops.
•
Insert the electronic view finder by pushing on its lower part.
5 Turn on the camera.
6 Each press of the u button switches between the monitor
display and electronic view finder display.
•
You can adjust the brightness and color temperature of the electronic view
finder. g “EVF ADJUST” (P. 74)
7 Turn the diopter adjustment ring to
a position where the image on the
viewfinder can be seen clearly.
11
•
Adjust the electronic view finder to your
preferred angle (up to 90 degrees).
# Caution
• You cannot use an external flash and the electronic
view finder at the same time.
• When carrying the camera, do not hold it by the
electronic view finder. The camera may separate
from the electronic view finder and drop.
• Do not leave the camera with the electronic view
finder attached in a location subject to direct
sunlight.
100 EN
Program line diagram (Pmode)
In the Pmode, the camera is programmed such that the aperture value and
shutter speed are automatically selected according to the subject's brightness as
shown below. The program line diagram varies with the type of lens mounted.
When using the
(14–42 mm F3.5–5.6)
zoom lens
(focal length: 14 mm)
Program shift
Shutter speed
Exposure warning display
If the optimum exposure cannot be obtained when pressing the shutter button
halfway, the display will blink on the LCD monitor.
Shooting Warning display
mode example (blinking)
Status
Action
The subject is
too dark.
• Increase the ISO sensitivity.
• Use the flash.
60" F2.8
P
• Decrease the ISO sensitivity.
• Use a commercially available ND
filter (for adjusting the amount of
light).
The subject is
too bright.
2000 F22
30" F5.6
11
The subject is
underexposed.
• Decrease the aperture value.
• Increase the ISO sensitivity.
A
• Increase the aperture value.
The subject is
overexposed.
•
Decrease the ISO sensitivity or use
a commercially available ND filter
(for adjusting the amount of light).
2000 F5.6
The subject is
underexposed.
• Set the shutter speed slower.
• Increase the ISO sensitivity.
2000 F2.8
S
• Set the shutter speed faster.
The subject is
overexposed.
• Decrease the ISO sensitivity or use
a commercially available ND filter
(for adjusting the amount of light).
2000 F22
• The aperture value at the moment when its indication blinks varies with the lens
type and focal length of the lens.
EN 101
Flash synchronization and shutter speed
Upper limit of
Fixed
Shooting
mode
Flash timing
synchronization timing when
timing*1
flash fires*2
P
A
S
1/ (lens focal length × 2) or synchronization
timing, whichever is slower
1/60
1/160
The set shutter speed
―
M
*1 Can be changed using menu: 1/60–1/160 g“#X-SYNC.” (P. 75)
*2 Can be changed using menu: 1/30–1/160 g“#SLOW LIMIT” (P. 75)
Flash modes that can be set by shooting mode
Super
control
panel
Shooting
Mode
Flash
timing
Conditions for
firing the flash speed limit
Shutter
Flash Mode
#
Auto flash
Fires automatically
AUTO
in dark/backlit*1
1st
curtain
1/30 sec.–
1/160 sec.
Auto flash
(red-eye reduction)
Fill-in flash
conditions
!
Always fires
#
$
Flash off
k
k
k
P/A
Slow synchronization
(red-eye reduction)
Slow synchronization
(1st curtain)
!
SLOW
#
1st
curtain
Fires automatically
in dark/backlit*1
conditions
60 sec.–
1/160 sec.
SLOW
#
Slow synchronization 2nd
(2nd curtain)
Fill-in flash
Fill-in flash
(red-eye reduction)
curtain
SLOW2
#
1st
curtain
60 sec.–
1/160 sec.
Always fires
k
H
$
11
S/M
Flash off
k
k
Fill-in flash/Slow
synchronization
(2nd curtain)
2nd
CURTAIN
2nd
curtain
60 sec.–
1/160 sec.
Always fires
*1 When the flash is set to the Super FP mode, it detects backlight with longer
duration than for normal flash before emitting light.
• #AUTO, $can be set inAmode.
Focal lengths that can be set
8 mm
35 mm
85 mm
10 mm
40 mm
90 mm
12 mm
48 mm
16 mm
50 mm
18 mm
55 mm
21 mm
65 mm
24 mm
70 mm
28 mm
75 mm
30 mm
80 mm
100 mm 105 mm 120 mm 135 mm 150 mm 180 mm 200 mm
210 mm 250 mm 300 mm 350 mm 400 mm 500 mm 600 mm 800 mm 1000 mm
• Choose the value that most closely matches to the one that is printed on the lens.
102 EN
External flash shooting
With this camera, you can use one of the separately sold external flash units to
achieve a flash suited to your needs. The external flashes communicate with the
camera, allowing you to control the camera's flash modes with various available
flash control modes, such as TTL-AUTO and Super FP flash.
An external flash unit specified for use with this camera can be mounted on the
camera by attaching it to the camera's hot shoe. You can also attach the flash to
the flash bracket on the camera using the bracket cable (optional). Refer to the
documentation provided with the external flash units as well.
Functions available with external flash units
Optional flash
FL-50R
FL-36R
FL-20
FL-14 RF-11 TF-22
Flash control TTL-AUTO, AUTO, MANUAL, TTL-AUTO, AUTO, TTL-AUTO,
mode
FP TTL AUTO, FP MANUAL MANUAL
MANUAL
GN50
(85mm*)
GN28
(24mm*)
D
GN36
(85mm*)
GN20
(24mm*)
D
GN (Guide
number)
(ISO100)
GN20
(35mm*) (28mm*)
GN14
GN11 GN22
RC mode
–
–
–
–
*
The focal length of the lens that can be used (Calculated based on 35 mm film camera).
Wireless remote control flash photography
External flash units that offer a remote control mode and are designated for use
with this camera can be used for wireless flash photography. The built-in flash
can control up to three flash units independently. See the documentation provided
with the external flash units for details.
„ Wireless flash control range
Position the wireless
flash units with their
remote sensors
facing the camera.
The following
illustration shows
the approximate
ranges at which the
flash units can be
positioned. The actual
control range varies
with local conditions.
11
30°
30°
10m
60°
50°
50°
5m
100°
# Caution
• If [ON] is selected for [#RC MODE], photographs can only be taken with a wireless
flash.
EN 103
Functions that can be registered with My Mode and
Custom Reset Setting
Custom
reset
setting
Custom
reset
setting
My Mode
registration
My Mode
registration
Function
Function
registration
registration
D
D
D
D
D
D
D
D
D
D
HISTOGRAM
SETTING
EVF ADJUST
BACKLIT LCD
MODE GUIDE
F
k
k
IMAGE STABILIZER
jY*
FLASH MODE
PICTURE MODE
STILL
k
k
k
k
k
k
q
CLOSEUP
MODE
k
k
D
D
PICTURE
MOVIE
K
D
k
k
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
k
D
D
D
D
D
D
D
k
k
k
k
D
D
D
D
8
VOLUME
k
k
k
D
D
k
D
D
k
k
k
D
D
D
k
D
D
D
k
D
D
k
k
k
k
k
k
k
k
k
k
k
k
k
D
D
D
D
D
D
D
D
D
D
D
D
D
D
IMAGE ASPECT
w
AE BKT
WB BKT
FL BKT
ISO BKT
MULTIPLE
EXPOSURE
X
W
s
USB MODE
EV STEP
METERING
AEL Metering
ISO
ISO STEP
ISO-AUTO SET
ISO-AUTO
BULB TIMER
ANTI-SHOCK z
#X-SYNC.
#SLOW LIMIT
w+F
k
k
k
k
k
k
k
k
k
k
k
D
k
k
REC VIEW
cMENU DISPLAY
FIRMWARE
NOISE REDUCT.
NOISE FILTER
WB
STILL
D
D
AF
PICTURE
MODE
MOVIE
k
D
k
k
k
k
k
k
k
k
k
k
k
D
D
k
D
D
k
k
D
D
k
D
D
D
D
ALL >
AF AREA
COLOR SPACE
SHADING COMP.
KSET
RESET LENS
BULB FOCUSING
FOCUS RING
MF ASSIST
PSET HOME
AEL/AFL
AEL/AFL MEMO
; FUNCTION
R FUNCTION
MY MODE SETUP
BUTTON TIMER
RLS PRIORITY S
RLS PRIORITY C
HDMI
VIDEO OUT
SLEEP
LIVE VIEW BOOST
g FACE DETECT
G/INFO SETTING
KCONTROL
SETTING
11
PIXEL COUNT
QUICK ERASE
RAW+JPEG ERASE
FILE NAME
EDIT FILENAME
PRIORITY SET
dpi SETTING
nMODE
MOVIE+STILL
MOVIE R
PIXEL MAPPING
EXPOSURE SHIFT
8 WARNING
LEVEL
k
k
D
D
k
k
D
D
k
D
k
k
k
k
k
k
k
D: Can be registered.
k: Cannot be registered.
*
Includes anti-shock.
k
k
104 EN
Record mode and file size/number of storable still
pictures
The file size in the table is approximate for files with a 4:3 aspect ratio.
Number of
File size (MB) storable still
picture*1
Record Number of pixels
mode (PIXEL COUNT)
File
format
Compression
Loss-less
compression
1/2.7
1/4
RAW
ORF
Approx. 14
54
YSF
YF
YN
YB
Approx. 8.4
Approx. 5.9
Approx. 2.7
Approx. 1.8
Approx. 5.6
Approx. 3.4
Approx. 1.7
Approx. 1.2
Approx. 3.2
Approx. 2.2
Approx. 1.1
Approx. 0.8
Approx. 1.3
Approx. 0.9
Approx. 0.5
Approx. 0.4
Approx. 0.9
Approx. 0.6
Approx. 0.3
Approx. 0.3
Approx. 0.6
Approx. 0.4
Approx. 0.3
Approx. 0.2
Approx. 0.3
Approx. 0.2
Approx. 0.2
Approx. 0.1
101
145
320
477
154
255
504
747
269
395
776
1143
673
993
1893
2753
1044
1514
2884
4038
1594
2243
4038
5507
3563
5048
8654
10096
4032×3024
1/8
1/12
1/2.7
1/4
XSF
XF
3200×2400
XN
1/8
XB
XSF
1/12
1/2.7
1/4
XF
2560×1920
XN
1/8
XB
XSF
1/12
1/2.7
1/4
XF
1600×1200
XN
JPEG
1/8
XB
WSF
1/12
1/2.7
1/4
WF
1280×960
WN
1/8
WB
WSF
1/12
1/2.7
1/4
WF
1024×768
WN
1/8
WB
WSF
1/12
1/2.7
1/4
1/8
1/12
11
WF
640×480
WN
WB
*1 Assumes a 1GB SD card.
# Caution
• The number of remaining pictures may change according to the subject, whether or
not print reservations have been made, and other factors. In certain instances, the
number of remaining pictures displayed on the LCD monitor will not change even
when you take pictures or erase stored images.
• The actual file size varies according to the subject.
• The maximum number of storable still pictures displayed on the monitor is 9999.
• For the available recording time for movies, see the Olympus website.
EN 105
Menu directory
K
Shooting Menu
Tab
W
Function
Default
―
―
g
P. 66, 95
P. 70
CARD SETUP
CUSTOM RESET
PICTURE MODE
P. 52
jNATURAL
STILL PICTURE YN
MOVIE
P. 31
K
HD
IMAGE ASPECT
X jY
IMAGE STABILIZER
4:3
o
OFF
OFF
P. 32
P. 30
P. 50
P. 48
AE BKT
WB
BKT
A–B
G–M
OFF
P. 49
BRACKETING
FL BKT
ISO BKT
FRAME
AUTO GAIN
OVERLAY
OFF
OFF
OFF
OFF
OFF
P. 49
P. 49
MULTIPLE EXPOSURE
P. 51
±0
P. 55
w
OFF
P. 103
#RC mode
q Playback Menu
Tab
q
Function
START
BGM
Default
―
MELANCHOLY
g
P. 62
m
SLIDE
SLIDE INTERVAL
MOVIE INTERVAL
ALL
3 SEC
SHORT
―
RAW DATA EDIT
JPEG EDIT
R
P. 63
P. 63
P. 65
P. 64
P. 82
P. 66
11
―
―
―
―
SEL. IMAGE
EDIT
IMAGE OVERLAY
<
RESET PROTECT
―
d Setup Menu
Tab
d
Function
Default
―
―
g
P. 7
X
W*1
s
P. 69
P. 69
P. 69
P. 71
P. 69
j ±0, k ±0
5 SEC
OFF
REC VIEW
c MENU DISPLAY
FIRMWARE
―
*1 Settings differ depending on the region where the camera is purchased.
106 EN
cCustom Menu
Tab
Function
Default
g
P. 72
c
R
AF/MF
STILL PICTURE
MOVIE
AF MODE
S-AF
P. 44
AF AREA
RESET LENS
B
ON
ON
b
P. 45
P. 72
P. 72
P. 72
P. 72
P. 72
P. 72
BULB FOCUSING
FOCUS RING
MF ASSIST
PSET HOME
BUTTON
OFF
B
S
S-AF
C-AF
MF
mode1
mode2
mode1
AEL/AFL
P. 79
AEL/AFL MEMO
;FUNCTION
R FUNCTION
MY MODE SETUP
BUTTON TIMER
RELEASE
RLS PRIORITY S
RLS PRIORITY C
DISP/8/PC
ON
P. 72
P. 80
P. 80
P. 73
P. 73
P. 73
P. 73
P. 73
P. 73
Fn FACE DETECT
R REC
—
8 SEC
T
U
OFF
ON
HDMI OUT
HDMI CONTROL OFF
1080i
HDMI
P. 73
VIDEO OUT
SLEEP
NTSC
1MIN
P. 73
P. 74
LIVE VIEW BOOST
g FACE DETECT
OFF
ON
P. 74
P. 32, 74
IMAGE ONLY,
OVERALL
IMAGE ONLY, u
O, CALENDAR
LIVE GUIDE
LIVE CONTROL
LIVE CONTROL
255
qINFO
G/INFO
SETTING
P. 74
LV-INFO
GSETTING
iAUTO
11
KCONTROL
SETTING
P/A/S/M
P. 74
P. 74
ART/SCN
HIGHLIGHT
SHADOW
HISTOGRAM
SETTING
0
EVF ADJUST
BACKLIT LCD
MODE GUIDE
j ±0, k ±0
8 SEC
ON
P. 74
P. 74
P. 74
qCLOSEUP MODE
8
mode1
ON
P. 60, 74
P. 75
VOLUME
3
P. 75
USB MODE
AUTO
P. 75
EN 107
Tab
Function
EXP/e/ISO
EV STEP
METERING
AEL Metering
ISO
Default
g
P. 75
P. 75
P. 47
P. 75
P. 41
P. 75
c
V
1/3EV
e
AUTO
AUTO
1/3EV
ISO STEP
HIGH LIMIT: 1600
DEFAULT: 200
P/A/S
8 MIN
OFF
ISO-AUTO SET
P. 75
ISO-AUTO
P. 75
P. 75
P. 75
P. 75
P. 75
P. 75
P. 75
P. 76
P. 76
P. 76
BULB TIMER
ANTI-SHOCK z
# CUSTOM
#X-SYNC.
#SLOW LIMIT
w+F
K/COLOR/WB
NOISE REDUCT.
NOISE FILTER
W
X
1/160
1/60
OFF
AUTO
STANDARD
A –7–+7,
G –7–+7
WB
AUTO
P. 41
ALL SET
ALL RESET
COLOR SPACE
—
—
P. 76
P. 76
P. 76
P. 76
P. 76
ALL >
sRGB
OFF
SHADING COMP.
—
KSET
Xiddle
Wmall
2560×1920
1280×960
PIXEL COUNT
P. 77
Y
RECORD/ERASE
QUICK ERASE
RAW+JPEG ERASE
FILE NAME
EDIT FILENAME
PRIORITY SET
dpi SETTING
MOVIE
nMODE
MOVIE+STILL
MOVIE R
KUTILITY
P. 77
P. 77
P. 77
P. 77
P. 77
P. 78
P. 78
P. 78
P. 56
P. 58
P. 57
P. 78
P. 94
OFF
RAW+JPEG
AUTO
OFF
NO
AUTO
11
Z
P
OFF
ON
b
PIXEL MAPPING
—
e
EXPOSURE
J
±0
±0
P. 78
P. 78
SHIFT
5
8 WARNING LEVEL
108 EN
Specifications
Camera
Product type
Product type
Lens
Digital camera with interchangeable lens system
M.Zuiko Digital, Micro Four Thirds System Lens
Micro Four Thirds mount
Lens mount
Equivalent focal length on a Approx. twice the focal length of the lens
35 mm film camera
Image pickup device
Product type
4/3" Live MOS sensor
Approx.13,060,000 pixels
Approx.12,300,000 pixels
17.3 mm(H)×13.0 mm(V)
1.33 (4:3)
No. of total pixels
No. of effective pixels
Screen size
Aspect ratio
Live view
Sensor
Field of view
Uses Live MOS sensor
100%
LCD monitor
Product type
Total no. of pixels
2.7" TFT color LCD
Approx.230,000 dots
Shutter
Product type
Shutter
Computerized focal-plane shutter
1/2000–60 sec., Bulb shooting
Auto focus
Product type
Focusing points
Imager contrast detection system
11 points
Selection of focusing point Auto, Optional
Exposure control
Metering system
Metered range
Shooting modes
TTL metering system (imager metering)
Digital ESP metering/Center weighted averaging metering/Spot metering
EV0–18 (Digital ESP metering/Center weighted averaging metering/Spot
metering)
A: iAUTO/P: Program AE (Program shift can be performed)/
A: Aperture priority AE/S: Shutter priority AE/M: Manual/ART: Art filter/
SCN: Scene/n: Movie
ISO sensitivity
100–3200 (1/3, 1 EV step)
Exposure compensation
±3EV (1/3, 1/2, 1 EV step)
White balance
Product type
Mode setting
11
Image pickup device
Auto/Preset WB (8 settings)/Customized WB/One-touch WB
Recording
Memory
SD memory card/SDHC memory card
Recording system
Digital recording, JPEG (in accordance with Design rule for Camera File
system (DCF)), RAW Data
Applicable standards
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III,
PictBridge
Sound with still pictures
Movie
Audio
Wave format
AVI Motion JPEG
PCM 44.1 kHz
Playback
Display format
Single-frame playback/Close-up playback/Index display/Calendar display
Drive
Drive mode
Sequential shooting
Self-timer
Single-frame shooting/Sequential shooting/Self-timer
3 frames/sec.
Operation time: 12 sec., 2 sec.
EN 109
External flash
Synchronization
Flash control mode
Flash attachment
Synchronized with the camera at 1/160 sec. or less
TTL-AUTO (TTL pre-flash mode)/AUTO/MANUAL
Hot shoe
External connector
Multi-connector (USB connector, AV connector)/HDMI mini connector (Type C)/Accessory port
Power supply
Battery
Li-ion Battery (BLS-1) ×1
Dimensions/weight
Dimensions
114.6 mm(W)×72.2 mm(H)×41.5 mm(D) (4.5"×2.8"×1.6")
(excluding protrusions)
Weight
Approx. 344 g (0.8 Ib.) (including battery and memory card)
Operating environment
Temperature
Humidity
0 °C–40 °C (32 °F–104 °F) (operation)/–20 °C–60 °C (–4 °F–140 °F) (storage)
30%–90% (operation)/10%–90% (storage)
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Battery/charger
„ BLS-1 Lithium ion battery
MODEL NO.
PS-BLS1
Product type
Rechargeable Lithium ion battery
Nominal voltage
Nominal capacity
No. of charge and
discharge times
Ambient temperature
DC 7.2 V
1150 mAh
Approx. 500 times (varies with usage conditions)
0 °C–40 °C (32 °F–104 °F) (charging)
–10 °C–60 °C (14 °F–140 °F) (operation)
–20 °C–35 °C (–4 °F–95 °F) (storage)
Approx. 35.5 mm(W)×55 mm(D)×12.8 mm(H)
(1.4" × 2.2" × 0.5")
Dimensions
Weight
Approx. 46 g (0.1Ib.)
„ BCS-1 Lithium ion charger
MODEL NO.
Rated input
Rated output
PS-BCS1
AC 100V–240V (50/60Hz)
DC 8.35V, 400mA
11
Charging time
Ambient temperature
Approx. 3 hours 30 minutes (room temperature if using BLS-1)
0 °C–40 °C (32 °F–104 °F) (operation)/
-20 °C–60 °C (-4 °F–140 °F) (storage)
Approx. 62 mm(W)×83 mm(D)×38 mm(H) (2.4"×3.3"×1.5")
Approx. 72 g (0.2Ib.) (without AC cable)
Dimensions
Weight
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR
OBLIGATION ON THE PART OF THE MANUFACTURER.
110 EN
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
An exclamation mark enclosed in a triangle alerts you to important
operating and maintenance instructions in the documentation provided
with the product.
If the product is used without observing the information given under this
symbol, serious injury or death may result.
DANGER
If the product is used without observing the information given under this
symbol, injury or death may result.
WARNING
CAUTION
If the product is used without observing the information given under
this symbol, minor personal injury, damage to the equipment, or loss of
valuable data may result.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE,
EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY
ENVIRONMENT.
Heat — Never use or store this product
General Precautions
Read All Instructions — Before you use
near any heat source such as a radiator, heat
register, stove, or any type of equipment or
the product, read all operating instructions.
appliance that generates heat, including stereo
Save all manuals and documentation for future
reference.
amplifiers.
Product Handling Precautions
WARNING
Cleaning — Always unplug this product from
the wall outlet before cleaning. Use only a
damp cloth for cleaning. Never use any type of
liquid or aerosol cleaner, or any type of organic
solvent to clean this product.
11
•
Do not use the camera near flammable or
explosive gases.
Attachments — For your safety, and to avoid
damaging the product, use only accessories
recommended by Olympus.
•
Do not use the flash and LED on people
(infants, small children, etc.) at close
range.
Water and Moisture — For precautions on
products with weatherproof designs, read the
weatherproofing sections.
You must be at least 1 m (3 ft.) away from
the faces of your subjects. Firing the flash
too close to the subject's eyes could cause
a momentary loss of vision.
Location — To avoid damage to the product,
mount the product securely on a stable tripod,
stand, or bracket.
•
Keep young children and infants away
from the camera.
Power Source — Connect this product only
to the power source described on the product
label.
Always use and store the camera out of
the reach of young children and infants to
prevent the following dangerous situations
which could cause serious injury:
Foreign Objects — To avoid personal injury,
never insert a metal object into the product.
• Becoming entangled in the camera
strap, causing strangulation.
EN 111
• Accidentally swallowing the battery,
cards or other small parts.
Battery Handling Precautions
Follow these important guidelines to prevent
batteries from leaking, overheating, burning,
exploding, or causing electrical shocks or
burns.
• Accidentally firing the flash into their own
eyes or those of another child.
• Accidentally being injured by the moving
parts of the camera.
•
•
•
Do not look at the sun or strong lights
with the camera.
DANGER
•
The camera uses a lithium ion battery
specified by Olympus. Charge the battery
with the specified charger. Do not use any
other chargers.
Do not use or store the camera in dusty
or humid places.
Do not cover the flash with a hand while
firing.
•
•
Never heat or incinerate batteries.
CAUTION
Stop using the camera immediately if
you notice any unusual odors, noise, or
smoke around it.
Take precautions when carrying or storing
batteries to prevent them from coming into
contact with any metal objects such as
jewelry, pins, fasteners, etc.
•
•
•
Never store batteries where they will be
exposed to direct sunlight, or subjected to
high temperatures in a hot vehicle, near a
heat source, etc.
Never remove the batteries with bare
hands, which may cause a fire or burn
your hands.
•
•
Never hold or operate the camera with
wet hands.
To prevent causing battery leaks or
damaging their terminals, carefully follow all
instructions regarding the use of batteries.
Never attempt to disassemble a battery or
modify it in any way, by soldering, etc.
Do not leave the camera in places where
it may be subject to extremely high
temperatures.
Doing so may cause parts to deteriorate
and, in some circumstances, cause the
camera to catch fire.
Do not use the charger if it is covered
(such as a blanket). This could cause
overheating, resulting in fire.
•
•
If battery fluid gets into your eyes, flush
your eyes immediately with clear, cold
running water and seek medical attention
immediately.
Always store batteries out of the reach
of small children. If a child accidentally
swallows a battery, seek medical attention
immediately.
•
Handle the camera with care to avoid
getting a low-temperature burn.
When the camera contains metal
parts, overheating can result in a low-
temperature burn. Pay attention to the
following:
WARNING
Keep batteries dry at all times.
•
•
To prevent batteries from leaking,
overheating, or causing a fire or explosion,
use only batteries recommended for use
with this product.
11
• When used for a long period, the camera
will get hot. If you hold on to the camera
in this state, a low temperature burn may
be caused.
•
•
Insert the battery carefully as described in
the operating instructions.
• In places subject to extremely cold
temperatures, the temperature of the
camera's body may be lower than the
environmental temperature. If possible,
wear gloves when handling the camera
in cold temperatures.
If rechargeable batteries have not been
recharged within the specified time, stop
charging them and do not use them.
•
•
Do not use a battery if it is cracked or
broken.
•
Be careful with the strap.
If a battery leaks, becomes discolored or
deformed, or becomes abnormal in any
other way during operation, stop using the
camera.
Be careful with the strap when you carry
the camera. It could easily catch on stray
objects - and cause serious damage.
•
If a battery leaks fluid onto your clothing
or skin, remove the clothing and flush the
affected area with clean, running cold water
immediately.
112 EN
If the fluid burns your skin, seek medical
• Near flammable items or explosives.
attention immediately.
• In wet places, such as bathrooms
or in the rain. When using products
with weatherproof designs, read their
manuals as well.
•
Never subject batteries to strong shocks or
continuous vibration.
CAUTION
• In places prone to strong vibrations.
•
•
Before loading, always inspect the battery
carefully for leaks, discoloration, warping, or
any other abnormality.
•
•
Never drop the camera or subject it to
severe shocks or vibrations.
When mounted on a tripod, adjust the
position of the camera with the tripod head.
Do not twist the camera.
The battery may become hot during
prolonged use. To avoid minor burns, do not
remove it immediately after using the camera.
•
Do not leave the camera pointed directly
at the sun. This may cause lens or shutter
curtain damage, color failure, ghosting on
the image pickup device, or may possibly
cause fires.
•
•
Always unload the battery from the camera
before storing the camera for a long period.
This camera uses a lithium ion battery
specified by Olympus. Do not use any
other type of battery. For safe and proper
use, read the battery's instruction manual
carefully before using it.
•
•
Do not touch electric contacts on cameras
and interchangeable lenses. Remember to
attach the body cap when removing the lens.
•
•
•
If the battery's terminals get wet or greasy,
camera contact failure may result. Wipe the
battery well with a dry cloth before use.
Before storing the camera for a long period,
remove the battery. Select a cool, dry
location for storage to prevent condensation
or mold from forming inside the camera.
After storage, test the camera by turning it
on and pressing the shutter release button
to make sure that it is operating normally.
Always charge a battery when using it for
the first time, or if it has not been used for a
long period.
When operating the camera with battery
power at low temperatures, try to keep
the camera and spare battery as warm as
possible. A battery that has run down at
low temperatures may be restored after it is
warmed at room temperature.
•
•
Always observe the operating environment
restrictions described in the camera's
manual.
Do not directly touch or wipe the image
pickup device of the camera.
•
•
The number of pictures you can take may
vary depending on the shooting conditions
or battery.
LCD Monitor
•
Do not push the monitor forcibly; otherwise
the image may become vague, resulting in
a playback mode failure or damage to the
monitor.
Before going on a long trip, and especially
before traveling abroad, purchase extra
batteries. A recommended battery may be
difficult to obtain while traveling.
•
•
A strip of light may appear on the top/bottom
of the monitor, but this is not a malfunction.
11
•
Please recycle batteries to help save our
planet’s resources. When you throw away
dead batteries, be sure to cover their
terminals and always observe local laws
and regulations.
When a subject is viewed diagonally in the
camera, the edges may appear zigzagged
on the monitor. This is not a malfunction; it
will be less noticeable in playback mode.
•
In places subject to low temperatures, the
LCD monitor may take a long time to turn on
or its color may change temporarily.
When using the camera in extremely cold
places, it is a good idea to occasionally
place it in a warm place. An LCD monitor
exhibiting poor performance due to low
temperatures will recover in normal
temperatures.
Caution for Usage Environment
•
To protect the high-precision technology
contained in this product, never leave the
camera in the places listed below, no matter
if in use or storage:
• Places where temperatures and/or
humidity are high or go through extreme
changes.
Direct sunlight, beaches, locked cars, or
near other heat sources (stove, radiator,
etc.) or humidifiers.
•
The LCD used for the monitor is made with
high-precision technology. However, black
spots or bright spots of light may appear
constantly on the LCD Monitor.
• In sandy or dusty environments.
EN 113
Due to its characteristics or the angle at
which you are viewing the monitor, the spot
may not be uniform in color and brightness.
This is not a malfunction.
Copyright Notice
All rights reserved. No part of these written
materials or this software may be reproduced
or used in any form or by any means, electronic
or mechanical, including photocopying and
recording or the use of any type of information
storage and retrieval system, without the prior
written permission of Olympus. No liability
is assumed with respect to the use of the
information contained in these written materials
or software, or for damages resulting from
the use of the information contained therein.
Olympus reserves the right to alter the features
and contents of this publication or software
without obligation or advance notice.
Lens
•
Do not immerse in water or splash with
water.
•
•
•
•
•
Do not drop or exert strong force on the lens.
Do not hold at the moving part of the lens.
Do not touch the lens surface directly.
Do not touch the contact points directly.
Do not subject to abrupt temperature
changes.
•
The operating temperature range is –10 °C
–40 °C (14 °F–104 °F). Always use within
this temperature range.
FCC Notice
•
Radio and Television Interference
Changes or modifications not expressly
approved by the manufacturer may void the
user's authority to operate this equipment.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications.
Legal and Other Notices
•
Olympus makes no representations or
warranties regarding any damages, or
benefit expected by using this unit lawfully,
or any request from a third person, which
are caused by the inappropriate use of this
product.
•
Olympus makes no representations or
warranties regarding any damages or any
benefit expected by using this unit lawfully
which are caused by erasing picture data.
Disclaimer of Warranty
•
Olympus makes no representations or
warranties, either expressed or implied, by
or concerning any content of these written
materials or software, and in no event
shall be liable for any implied warranty of
merchantability or fitness for any particular
purpose or for any consequential, incidental
or indirect damages (including but not
limited to damages for loss of business
profits, business interruption and loss of
business information) arising from the use
or inability to use these written materials
or software or equipment. Some countries
do not allow the exclusion or limitation
of liability for consequential or incidental
damages, so the above limitations may not
apply to you.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
11
• Adjust or relocate the receiving antenna.
• Increase the distance between the
camera and receiver.
• Connect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.
• Consult your dealer or an experienced
radio/TV technician for help. Only the
OLYMPUS-supplied USB cable should
be used to connect the camera to USB
enabled personal computers (PC).
•
Olympus reserves all rights to this manual.
Warning
Unauthorized photographing or use of
copyrighted material may violate applicable
copyright laws. Olympus assumes no
responsibility for unauthorized photographing,
use or other acts that infringe upon the rights of
copyright owners.
Any unauthorized changes or modifications to
this equipment would void the user's authority
to operate it.
114 EN
and/or battery charger may result in fire or
personal injury due to leakage, heating, ignition
or damage to the battery. Olympus does not
assume any liability for accidents or damage
that may result from the use of a battery and/or
battery charger that are not genuine Olympus
accessories.
Use Only Dedicated Rechargeable
Battery and Battery Charger
We strongly recommend that you use only
the genuine Olympus dedicated rechargeable
battery and battery charger with this camera.
Using a non-genuine rechargeable battery
For customers in North and South America
For customers in USA
Declaration of Conformity
Model Number
Trade Name
Responsible Party
Address
: E-PL1
: OLYMPUS
:
: 3500 Corporate Parkway, P. O. Box 610, Center Valley, PA 18034-0610, USA
Telephone Number : 484-896-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
For customers in Europe
“CE” mark indicates that this product complies with the European requirements
for safety, health, environment and customer protection. “CE” mark cameras are
intended for sales in Europe.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate
collection of waste electrical and electronic equipment in the EU countries.
Please do not throw the equipment into the domestic refuse.
Please use the return and collection systems available in your country for the
disposal of this product.
11
This symbol [crossed-out wheeled bin Directive 2006/66/EC Annex II] indicates
separate collection of waste batteries in the EU countries.
Please do not throw the batteries into the domestic refuse.
Please use the return and collection systems available in your country for the
disposal of the waste batteries.
Provisions of warranty
1
If this product proves to be defective, although it has been used properly (in accordance with
the written Handling Care and Operating instructions supplied with it), during the applicable
national warranty period and has been purchased from an authorized Olympus distributor within
the business area of Olympus Europa Holding GmbH as stipulated on the website: http://www.
olympus.com this product will be repaired, or at Olympus's option replaced, free of charge. To claim
under this warranty the customer must take the product before the end of the applicable national
warranty period to the dealer where the product was purchased or any other Olympus service
station within the business area of Olympus Europa Holding GmbH as stipulated on the website:
http://www.olympus.com. During the one year period of the World Wide Guarantee the customer
may turn the product in at any Olympus service station. Please notice that not in all countries such
Olympus service station exists.
EN 115
2
The customer shall transport the product to the dealer or Olympus authorized service station at his
own risk and shall be responsible for any costs incurred in transporting the product.
Provisions of Guarantee
1
"OLYMPUS IMAGING CORP., Shinjuku Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo
163-0914, Japan grants a one year World Wide Guarantee. This worldwide Guarantee must be
presented at an Olympus authorized repair service station before any repair can be made under
conditions of this Guarantee. This Guarantee is valid only if the Guarantee Certificate and proof
of purchase are presented at the Olympus repair service station. Please note that this Guarantee
is in addition to and does not affect the customer's legal warranty rights under the applicable
national legislation governing the sale of consumer goods mentioned above.
2
This Guarantee does not cover the following and the customer will be required to pay repair
charge, even for defects occurring within the Guarantee period referred to above.
(a) Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in
the Handling Care or other sections of the instructions, etc.)
(b) Any defect that occurs due to repair, modification, cleaning, etc. performed by anyone other than
Olympus or an Olympus authorized service station.
(c) Any defect or damage that occurs due to transport, a fall, shock, etc. after purchase of the product.
(d) Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural
disasters, environmental pollution and irregular voltage sources.
(e) Any defect that occurs due to careless or improper storage (such as keeping the product under
conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful
drugs, etc.), improper maintenance, etc.
(f) Any defect that occurs due to exhausted batteries, etc.
(g) Any defect that occurs due to sand, mud, etc. entering the inside of the product casing.
(h) When the Guarantee Certificate is not returned with the product.
(i) When any alterations whatsoever are made to the Guarantee Certificate regarding the year, month
and date of purchase, the customer's name, the dealer's name, and the serial number.
(j) When proof of purchase is not presented with this Guarantee Certificate.
3
4
This Guarantee applies to the product only; the Guarantee does not apply to any other accessory
equipment, such as the case, strap, lens cap and batteries.
Olympus's sole liability under this Guarantee shall be limited to repairing or replacing the product.
Any liability under the Guarantee for indirect or consequential loss or damage of any kind
incurred or suffered by the customer due to a defect of the product, and in particular any loss or
damage caused to any lenses, films, other equipment or accessories used with the product or for
any loss resulting from a delay in repair or loss of data, is excluded. Compelling regulations by
law remain unaffected by this.
Notes regarding Guarantee maintenance
11
1
This Guarantee will only be valid if the Guarantee Certificate is duly completed by Olympus or an
authorized dealer or other documents contain sufficient proof. Therefore, please make sure that
your name, the name of the dealer, the serial number and the year, month and date of purchase
are all completed or the original invoice or the sales receipt (indicating the dealer's name, the
date of purchase and product type) is attached to this Guarantee Certificate. Olympus reserves
the right to refuse free-of-charge service if neither Guarantee Certificate is completed nor the
above document is attached or if the information contained in it is incomplete or illegible.
2
Since this Guarantee Certificate will not be re-issued, keep it in a safe place.
• Please refer to the list on the web site: http:// www.olympus.com for the authorized
international Olympus service network.
116 EN
Trademarks
•
•
•
IBM is a registered trademark of International Business Machines Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Macintosh is a trademark of Apple Inc.
•
•
SDHC logo is a trademark.
“Shadow Adjustment Technology” function contains patented technologies from Apical
Limited.
•
•
All other company and product names are registered trademarks and/or trademarks of
their respective owners.
Micro Four Thirds and the Micro Four Thirds logo are trademarks or registered trademarks of
OLYMPUS IMAGING Corporation in Japan, the United States, the countries of the European
Union, and other countries.
•
The standards for camera file systems referred to in this manual are the “Design Rule for
Camera File System/DCF” standards stipulated by the Japan Electronics and Information
Technology Industries Association (JEITA).
11
EN 117
Index
Symbols
A
WShooting Menu 1...........................106
XShooting Menu 2...........................106
qPlayback Menu............................106
dSetup Menu..............................69, 106
cCustom Menu..........................71, 107
RAF/MF .............................................72
SBUTTON .........................................72
TRELEASE .......................................73
UDISP/8/PC....................................73
VEXP/e/ISO ..................................75
W#CUSTOM....................................75
XK/COLOR/WB..............................76
YRECORD/ERASE ...........................77
ZMOVIE ............................................78
b KUTILITY ....................................78
Y(Large).............................................31
X(Middle) .....................................31, 77
W(Small).......................................31, 77
#RC MODE.....................................103
W(Language selection).................69
cMENU DISPLAY........................69, 71
PSET HOME ..................................72
;FUNCTION...................................80
R FUNCTION.....................................80
PHOME ..........................................80
I/H ................................................80
R REC................................................80
g FACE DETECT ........................32, 74
G/INFO SETTING .............................74
KCONTROL SETTING ....................74
qCLOSE UP MODE.........................74
8(Beep sound).................................75
#SLOW LIMIT ...................................75
#X-SYNC. .........................................75
w+F.................................................75
KSET...............................................76
nMODE ............................................56
8 WARNING LEVEL.......................78
Adding sound to still pictures R...........65
AE BKT................................................48
AE bracketing......................................48
AE lock ................................................47
AEL Metering.......................................75
AEL/AFL........................................72, 80
AEL/AFL MEMO..................................72
AF AREA..............................................45
AF MODE ......................................44, 72
AF target P................................12, 45
ALL>..............................................76
ALL ERASE.........................................66
ALL TARGETS B..............................45
ANTI-SHOCK z................................75
Aperture priority shooting A................37
Aperture value.........................12, 37, 39
Art filter mode ART.............................16
ASPECT ........................................32, 63
Auto flash.............................................54
Auto focus......................................45, 90
Auto white balance..............................42
B
B (Basic)..............................................31
B&W FILTER .......................................53
BACKLIT LCD .....................................74
Battery .........................................3, 6, 96
BEACH & SNOW g..........................17
BGM ....................................................62
BLACK & WHITE.................................63
BRACKETING .....................................48
BULB FOCUSING ...............................72
Bulb shooting.......................................39
BULB TIMER.......................................75
BUTTON TIMER..................................73
11
C
C-AF (continuous AF)..........................44
C-AF+TR (AF Tracking).......................44
Calendar display..................................61
118 EN
FIRMWARE.........................................69
FL BKT.................................................49
Flash....................................................54
Flash bracketing..................................49
Flash intensity control w....................55
Flash mode #.....................................54
Flash off $.........................................54
Fn FACE DETECT...............................80
Focus lock ...........................................46
FOCUS RING......................................72
FORMAT..............................................95
Four Thirds system lenses ..................97
CANDLE &........................................17
Card.................................................4, 95
CARD SETUP ...............................66, 95
Center weighted averaging
metering H.....................................47
CHILDREN G.....................................17
Close-up playback U....................14, 60
COLOR SPACE...................................76
Color temperature................................42
Compression rate................................31
Continuous AF (C-AF).........................44
CONTRAST.........................................53
CUSTOM K ........................................52
CUSTOM RESET................................70
Custom white balance CWB................42
G
GENTLE SEPIA o.............................16
GRADATION .......................................53
GRAINY FILM l................................16
D
Date/time setting X.............................7
Digital ESP metering G.....................47
DIORAMA n ......................................16
Direct print ...........................................83
DIS MODE q....................................17
DOCUMENTS @................................17
dpi SETTING .......................................78
DPOF...................................................82
Dust reduction .................................6, 93
H
HD .......................................................57
HDMI .............................................67, 73
HIGH KEY H................................17, 53
Histogram ......................................33, 61
HISTOGRAM SETTING ......................74
Home position p.........................45, 72
I
E
iAUTO shooting A................... 11, 18
ib ........................................................88
i-ENHANCE h....................................52
IMAGE ASPECT..................................32
IMAGE OVERLAY ...............................64
Image size...........................................31
IMAGE STABILIZER o ......................50
Index display G...........................14, 60
Information display ........................33, 61
o (Image stabilizer)............................50
ISO ................................................41, 75
ISO BKT ..............................................49
ISO bracketing.....................................49
ISO STEP............................................75
ISO-AUTO ...........................................75
ISO-AUTO SET ...................................75
Easy printing........................................84
Easy shooting modes..........................10
EDIT FILENAME .................................77
EFFECT...............................................53
Electronic view finder.........................100
e-PORTRAIT e ...........................17, 63
ERASE SELECTED ............................66
EV STEP .............................................75
EVF ADJUST.......................................74
Exposure compensation F.................40
EXPOSURE SHIFT .............................78
11
F
F (Fine)................................................31
FILE NAME..........................................77
Fill-in flash #.......................................54
FIREWORKS (.................................17
EN 119
U
NIGHT+PORTRAIT
........................17
J
NOISE FILTER ....................................76
NOISE REDUCT..................................76
NTSC.............................................67, 73
JPEG ...................................................31
JPEG EDIT..........................................63
L
O
LANDSCAPE l.................................17
LANDSCAPE+PORTRAIT k.............17
Lens.................................................5, 97
Lithium ion battery...........................3, 96
Lithium ion charger..........................3, 96
Live control..........................................20
LIVE GUIDE ........................................18
LIVE VIEW BOOST.............................74
LOW KEY I.................................17, 53
One-touch white balance V........43, 80
P
PAL................................................67, 73
PANORAMA s............................17, 35
PICT. TONE.........................................53
PictBridge............................................83
PICTURE MODE.................................52
PIN HOLE m......................................16
PIXEL COUNT...............................31, 77
PIXEL MAPPING.................................94
Playback on TV ...................................67
POP ART j .......................................16
PORTRAIT a......................................52
PORTRAIT I.....................................17
Preset white balance...........................42
PREVIEW............................................37
PRINT..................................................84
Print reservation <.............................82
PRIORITY SET....................................78
Program shift %.................................36
Program shooting P............................36
Protecting 0.....................................65
M
M.ZUIKO DIGITAL interchangeable
lens..................................................97
MACRO &..........................................17
Manual focus (MF)...............................44
Manual shooting M..............................39
METERING....................................47, 75
MF (manual focus).........................44, 80
MF ASSIST..........................................72
Micro Four Thirds system lenses.........97
MODE GUIDE .....................................74
Monitor brightness adjustment s.......69
MONOTONE J...................................52
MOVIE PLAY.......................................58
MOVIER........................................57, 78
Movie shooting n.........................12, 56
MOVIE+STILL ...............................58, 78
MTP.....................................................87
Multi view display...........................33, 40
MULTIPLE EXPOSURE i ................51
MUTED Z..........................................52
MY MODE ...........................................80
MY MODE SETUP ..............................73
Q
11
QUICK ERASE....................................77
R
RAW ....................................................31
RAW DATA EDIT .................................63
RAWK..............................................80
RAW+JPEG ERASE............................77
REC VIEW...........................................69
Record mode K..................31, 57, 105
REDEYE FIX .......................................63
Red-eye reduction flash !...............54
RESET LENS ......................................72
RESET PROTECT ..............................66
Resizing Q........................................63
N
N (Normal)...........................................31
NATURAL j.......................................52
NATURE MACRO r.........................17
G
NIGHT SCENE
..............................17
120 EN
RLS PRIORITY C................................73
RLS PRIORITY S ................................73
ROTATE ..............................................64
SUNSET *........................................17
Super control panel .............................81
Super FP flash...................................103
S
T
S-AF (single AF) ..................................44
S-AF+MF.............................................44
SATURATION................................53, 63
Scene mode SCN...............................17
SD........................................................57
SD/SDHC card ................................4, 95
Self-timer Y........................................30
SEPIA..................................................63
Sequential shooting j......................30
SF (Super Fine)...................................31
SHADING COMP.................................76
SHADOW ADJ.....................................63
SHARPNESS ......................................53
Shutter priority shooting S...................38
Shutter speed..........................12, 38, 39
Single AF (S-AF)..................................44
SINGLE TARGET M.........................45
Single-frame erase D..........................15
Single-frame playback.........................59
Single-frame protect............................65
Single-frame shooting o...................30
SLEEP.................................................74
SLIDE..................................................62
Slideshow m......................................62
TEST PICTURE...................................80
Trimming P..................................63, 86
U
USB MODE .........................................75
V
VIDEO OUT.........................................73
VIVID i..............................................52
VOLUME .............................................75
W
WB.................................................41, 76
WB BKT...............................................49
WB bracketing.....................................49
White balance compensation >.......42
White balance WB...............................41
Z
Zoom display.......................................34
Zoom frame AF....................................46
Slow synchronization (1st curtain)
11
#SLOW ..........................................54
Slow synchronization (1st curtain)/
Red-eye reduction flash
!SLOW .......................................54
Slow synchronization (2nd curtain)
#SLOW2/2nd CURTAIN.................54
SOFT FOCUS k................................16
SPORT j..........................................17
Spot metering - highlight control
IHI................................................47
Spot metering - shadow control
ISH...............................................47
Spot metering I................................47
STORAGE...........................................87
Strap......................................................2
EN 121
MEMO
122 EN
MEMO
EN 123
9am to 9pm (Monday to Friday) ET
Printed in China
VN653501
|
QHT BIASI B3 B9 User Manual
Panasonic SDR SW21PC User Manual
Panasonic DV PROLINE AG DVX102BEN User Manual
Panasonic Car Video System CQ VD6505W User Manual
Olympus Camcorder Olympus E500 User Manual
MB QUART REF450 User Manual
Light Motion HC3 User Manual
Lanzar Car Audio HERITAGE HTG 2600D User Manual
Kenwood KAC 729S User Manual
JVC Studio SDI Kit KA F5603U User Manual