Nokia HS 36W User Manual

9239356_hs36w_1_en.fm Page 1 Saturday, August 20, 2005 3:25 PM  
Nokia Wireless Headset  
(HS-36W)  
User Guide  
9239356  
Issue 2 EN  
9239356_hs36w_1_en.fm Page 3 Saturday, August 20, 2005 3:25 PM  
Contents  
1. Introduction ....................... 4  
3. Basic use ............................ 8  
Bluetooth wireless technology....... 4  
Wear the headset on either ear ..... 8  
Call handling........................................ 8  
Store the headset properly .............. 9  
Troubleshooting.................................. 9  
2. Get started.......................... 5  
Chargers and batteries...................... 5  
Charge the battery............................. 6  
Switch the headset on or off .......... 6  
Pair the headset with a compatible  
phone..................................................... 6  
4. Battery information ........ 10  
Care and maintenance ........ 11  
3
9239356_hs36w_1_en.fm Page 4 Saturday, August 20, 2005 3:25 PM  
I n t r o d u c t i o n  
1. Introduction  
The Nokia Wireless Headset (HS-36W) can be used with compatible  
phones that support Bluetooth wireless technology. This allows you  
freedom to make and receive calls while on the move or in the office.  
Read this user guide carefully before using the headset. Read also the  
user guide for your phone, which provides important safety and  
maintenance information. Keep the headset out of reach of small  
children.  
Bluetooth wireless technology  
Bluetooth wireless technology allows you to connect compatible  
communication devices without cables. A Bluetooth connection does  
not require that the phone and the headset be in line of sight, but both  
devices should be within 10 meters (30 feet) of each other. Connections  
may be subject to interference from obstructions, such as walls, or other  
electronic devices.  
The headset is compliant with the Bluetooth Specification 1.2  
supporting the following profiles: Headset profile 1.1 and Hands-free  
Profile 1.0. Check with the manufacturers of other devices to determine  
their compatibility with this device.  
There may be restrictions on using Bluetooth technology in some  
locations. Check with your local authorities or service provider.  
4
9239356_hs36w_1_en.fm Page 5 Saturday, August 20, 2005 3:25 PM  
G e t s t a r t e d  
2. Get started  
The headset contains the following  
parts:  
• Indicator light (1)  
• Volume keys (2)  
• Charging socket (3)  
• Answer/end key (4)  
• Earhook (5)  
• Nokia Charger Adapter cable (CA-71) (6)  
Before you can start to use the headset, you  
must charge the battery, and pair a compatible  
phone with the headset.  
Note: Parts of the headset are magnetic. Metallic materials  
may be attracted to the headset, and persons with a hearing aid  
should not hold the headset to the ear with the hearing aid. Do  
not place credit cards or other magnetic storage media near the  
headset, because information stored on them may be erased.  
Chargers and batteries  
Check the model number of any charger before using it with this device.  
The Nokia Wireless Headset (HS-36W) is intended for use with the ACP-  
12 and LCH-12 chargers.  
Warning: Use only batteries and chargers approved by Nokia  
for use with this particular enhancement. The use of any other  
types may invalidate any approval or warranty, and may be  
dangerous.  
For availability of approved enhancements, please check with your  
dealer. When you disconnect the power cord of any enhancement, grasp  
and pull the plug, not the cord.  
5
9239356_hs36w_1_en.fm Page 6 Saturday, August 20, 2005 3:25 PM  
G e t s t a r t e d  
Charge the battery  
The headset has an internal, nonremovable, rechargeable battery. Do not  
attempt to remove the battery from the device, as you may damage the  
device.  
1. Ensure that the Nokia Charger Adapter cable (CA-71) is connected to  
the charger that is supplied with the headset. If this is not the case,  
connect the one end of the adapter cable to the charger cable.  
2. Connect the adapter cable to the  
headset.  
3. Connect the ACP-12 charger to a  
wall outlet or the LCH-12 charger to  
the accessory power outlet of your  
car. The blue indicator light is  
continuously displayed during charging.  
The headset is switched off and cannot be used during charging.  
4. When the battery is fully charged, the blue indicator light switches  
off. Disconnect the charger from the wall outlet or the accessory  
power outlet and the headset. When you disconnect the power cord  
of the charger, grasp and pull the plug, not the cord.  
The fully charged battery has power for up to 6 hours of talk-time or up  
to 110 hours of standby time. (In the standby mode, the headset is  
switched on but no call is in progress.)  
When the battery is running out of power, the red indicator light lights  
up. Charge the battery.  
Switch the headset on or off  
To switch on, press the answer/end key for about 1 second. To switch off,  
press and hold the answer/end key for about 5 seconds.  
Pair the headset with a compatible phone  
Make sure that the headset is on, and put it in pairing mode by pressing  
the answer/end key and the volume up (+) key at the same time over 5  
seconds until the blue indicator light lights up. The indicator light  
6
9239356_hs36w_1_en.fm Page 7 Saturday, August 20, 2005 3:25 PM  
G e t s t a r t e d  
remains on for 5 minutes, during which you can pair the headset with a  
compatible mobile phone.  
1. Set the phone to search for Bluetooth devices. See the user guide of  
your phone for instructions.  
2. When your phone finds the headset, confirm the pairing from your  
phone.  
3. When prompted for the Bluetooth passcode of the headset, enter  
0000.  
If the pairing was unsuccessful, try to pair the devices again.  
You only need to pair the headset with your phone once.  
If the pairing was successful, the blue indicator light starts to flash. The  
headset is now in the standby mode and ready for use.  
7
9239356_hs36w_1_en.fm Page 8 Saturday, August 20, 2005 3:25 PM  
B a s i c u s e  
3. Basic use  
Wear the headset on either ear  
The headset is ready to wear on the right ear. If you want to use it on the  
left ear, gently flip (1) and rotate the earhook (2).  
Call handling  
To answer a call, press the answer key on your mobile phone, or press the  
answer/end key on the headset briefly. If you do not want to answer a  
call, press and hold the answer/end key on the headset for about 1  
second.  
To make a call, dial the number with your mobile phone, and press the  
answer key on your phone. The call is automatically transferred to the  
headset.  
To redial the last called number, press and hold the answer/end key on  
your headset for about 1 second when no call is in progress.  
If your phone supports voice dialing and there is no call in progress,  
press the answer/end key on the headset briefly, and proceed with voice  
dialing as described in the user guide of your phone. For the best result,  
record the voice tag through your headset.  
To increase or decrease the volume of the headset, press either volume  
key until the satisfactory volume level is reached.  
To end a call, press the end key on your mobile phone, or press the  
answer/end key on your headset briefly.  
8
9239356_hs36w_1_en.fm Page 9 Saturday, August 20, 2005 3:25 PM  
B a s i c u s e  
Store the headset properly  
Always store the headset with the power off and safely protected.  
Avoid storage in high temperatures (above 60°C/134°F), such as in a hot  
vehicle or in direct sunlight. Storage in high temperatures can degrade  
performance and reduce the battery life. Low temperatures (down to  
-10°C/14°F) shorten the battery life and may affect operation.  
Troubleshooting  
The audio quality is poor.  
For optimal performance, wear the headset and your mobile phone on  
the same side of your body or in line of sight.  
I have pairing problems even though my phone indicates otherwise.  
You may have deleted the headset pairing in your mobile phone. Pair the  
devices again.  
There is no audio in the headset. Do the following:  
• Increase the volume on the headset by pressing the volume up (+)  
key.  
• Ensure that the headset is paired with the phone.  
• Make sure that the phone is connected to the headset. If not, try to  
pair the devices again.  
9
9239356_hs36w_1_en.fm Page 10 Saturday, August 20, 2005 3:25 PM  
B a t t e r y i n f o r m a t i o n  
4. Battery information  
Your device is powered by a rechargeable battery. The full performance of a new  
battery is achieved only after two or three complete charge and discharge cycles.  
The battery can be charged and discharged hundreds of times, but it will  
eventually wear out. Recharge your battery only with Nokia approved chargers  
designated for this device.  
Unplug the charger from the electrical plug and the device when not in use. Do  
not leave a fully charged battery connected to a charger, since overcharging may  
shorten its lifetime. If left unused, a fully charged battery will lose its charge over  
time.  
Use the battery only for its intended purpose. Never use any charger or battery  
that is damaged.  
Leaving the device in hot or cold places, such as in a closed car in summer or  
winter conditions, will reduce the capacity and lifetime of the battery. Always try  
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot  
or cold battery may not work temporarily, even when the battery is fully charged.  
Battery performance is particularly limited in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also  
explode if damaged. Dispose of batteries according to local regulations. Please  
recycle when possible. Do not dispose as household waste.  
10  
9239356_hs36w_1_en.fm Page 11 Saturday, August 20, 2005 3:25 PM  
B a t t e r y i n f o r m a t i o n  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be  
treated with care. The suggestions below will help you protect your warranty  
coverage.  
Keep all accessories and enhancements out of the reach of small children.  
Keep the device dry. Precipitation, humidity and all types of liquids or  
moisture can contain minerals that will corrode electronic circuits. If your  
device does get wet, remove the battery and allow the device to dry  
completely before replacing it.  
Do not use or store the device in dusty, dirty areas. Its moving parts and  
electronic components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal  
temperature, moisture can form inside the device and damage electronic  
circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean  
the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper  
operation.  
All of the above suggestions apply equally to your device, battery, charger, or any  
enhancement. If any device is not working properly, take it to the nearest  
authorized service facility for service.  
11  
9239356_hs36w_1_en.fm Page 12 Saturday, August 20, 2005 3:25 PM  
B a t t e r y i n f o r m a t i o n  
12  

Nikon 1913 User Manual
Mitsubishi Electronics Diamond View Colour LCD Monitor DV180 User Manual
Legacy Car Audio LSWR 7100 User Manual
Kenwood KDC 6080RV User Manual
Kenwood KDC 5021V User Manual
Kenmore 10080001 User Manual
JVC TK C751 User Manual
JVC LYT0002 0N4B User Manual
JVC KD SX850 User Manual
JVC KD SH1000J User Manual