Nokia BH 203 User Manual

Nokia Bluetooth Headset BH-203  
5
3
6
7
8
9252760/1  
ENGLISH  
Unauthorized changes or modifications to  
this device may void the user's authority to  
operate the equipment.  
technology or software subject to export  
laws and regulations from the US and other  
countries. Diversion contrary to law is  
prohibited.  
Export Controls  
This device may contain commodities,  
Introduction  
The Nokia Bluetooth Headset BH-203 without cables. A Bluetooth  
allows you to make and receive calls  
while on the move. You can use the  
connection does not require that the  
phone and the headset be in line of  
headset with compatible phones that sight, but both devices should be  
support Bluetooth wireless  
technology.  
within 10 meters (30 feet) of each  
other. Connections may be subject to  
interference from obstructions, such  
as walls, or other electronic devices.  
Read this user guide carefully before  
using the headset. Also read the user  
guide for your phone, which provides The headset complies with the  
important safety and maintenance Bluetooth Specification 2.0 that  
information. Keep the headset out of supports the Headset Profile 1.1 and  
reach of small children.  
Handsfree Profile 1.5. Check with the  
manufacturers of other devices to  
determine their compatibility with  
this device.  
Bluetooth wireless technology  
Bluetooth wireless technology allows  
you to connect compatible devices  
ENGLISH  
There may be restrictions on using  
Bluetooth technology in some  
locations. Check with your local  
authorities or service provider.  
Get started  
headset is intended for use with the  
AC-1, ACP-8, ACP-12, and LCH-12  
chargers.  
The headset contains the following  
parts shown on the title page: charger  
connector (1), multifunction key (2),  
indicator light (3), volume keys (4),  
earloop (5), and microphone (6).  
Warning: Use only chargers  
approved by Nokia for use  
with this particular  
Before using the headset, you must  
charge the battery and pair the  
headset with a compatible phone.  
enhancement. The use of any other types  
may invalidate any approval or warranty  
and may be dangerous.  
Note: Parts of the headset are  
magnetic. Metallic materials  
may be attracted to the  
For availability of approved  
enhancements, please check with your  
dealer. When you disconnect the power  
cord of any enhancement, grasp and pull  
the plug, not the cord.  
headset. Do not place credit cards or  
other magnetic storage media near the  
headset, because information stored on  
them may be erased.  
Charge the battery  
The headset has an internal,  
nonremovable, rechargeable battery.  
Do not attempt to remove the battery  
Chargers  
Check the model number of any charger  
before using it with this device. The  
ENGLISH  
from the device, as you may damage  
the device.  
devices, usage settings, usage styles,  
and environments.  
1. Connect the charger to a wall  
outlet.  
When battery power is low, the  
indicator light flashes quickly and the  
headset beeps every 20 seconds.  
2. Connect the charger cable to the  
charger connector on the headset.  
The red indicator light is displayed  
while charging. It may take a while  
before charging starts. If charging  
does not start, connect the charger  
again, and retry. Charging the  
battery fully may take up to  
2 hours.  
Switch the headset on or off  
To switch on, press and hold the  
multifunction key until the headset  
beeps and the blue indicator light is  
displayed.  
To switch off, press and hold the  
multifunction key until the headset  
beeps and the red indicator light is  
displayed briefly.  
3. When the battery is fully charged,  
the red indicator light turns off.  
Disconnect the charger from the  
headset and the wall outlet.  
Pair the headset  
1. Switch on your phone and the  
headset.  
The fully charged battery has power  
for up to 10 hours of talk time or up to  
240 hours of standby time. However,  
the talk and standby times may vary  
when used with different mobile  
2. Press and hold the volume up (+)  
key and the volume down (-) key at  
the same time until the blue and  
red indicator lights start to  
alternate.  
phones or other compatible Bluetooth  
ENGLISH  
3. Activate the Bluetooth feature on  
the phone, and set the phone to  
search for Bluetooth devices.  
separately after pairing. You only  
need to pair the headset with your  
phone once.  
4. Select the headset from the list of If the pairing is successful, the  
found devices.  
headset beeps once and appears in the  
phone menu where you can view the  
currently paired Bluetooth devices.  
The headset is now ready for use.  
5. Enter the passcode 0000 to pair  
and connect the headset to your  
phone. In some phones you may  
need to make the connection  
Basic use  
If your phone supports last number  
redialing with the headset, press and  
hold the volume up key when no call is  
in progress.  
Wear the headset  
Slide the earloop behind your ear, and  
point the headset toward your mouth.  
To use the headset on the left ear,  
gently detach (7), flip, and attach (8)  
the earloop.  
If your phone supports voice dialing  
with the headset, press and hold the  
volume down key when no call in  
progress, and proceed as described in  
the user guide of your phone.  
Call handling  
To make a call, use your phone in the  
normal way when the headset is  
connected to your phone.  
ENGLISH  
To answer or end a call, press the  
multifunction key. To reject an  
To switch the call between the  
headset and your compatible phone,  
incoming call, press the multifunction press and hold the multifunction key  
key twice.  
and the volume down key at the same  
time.  
To mute or unmute the microphone  
during a call, press and hold the  
To adjust the earpiece volume during a  
multifunction key and the volume up call, press the volume up (+) key to  
key at the same time.  
increase or the volume down (-) key to  
decrease the volume.  
Battery information  
Your device is powered by a rechargeable left unused, a fully charged battery will  
battery. The battery can be charged and  
discharged hundreds of times, but it will  
eventually wear out. Recharge your  
battery only with Nokia approved  
lose its charge over time.  
Never use any charger that is damaged.  
Leaving the device in hot or cold places,  
such as in a closed car in summer or  
winter conditions, will reduce the  
capacity and lifetime of the battery.  
Always try to keep the battery between  
15°C and 25°C (59°F and 77°F). A device  
with a hot or cold battery may not work  
temporarily, even when the battery is  
fully charged. Battery performance is  
chargers designated for this device.  
Unplug the charger from the electrical  
plug and the device when not in use. Do  
not leave a fully charged battery  
connected to a charger, since  
overcharging may shorten its lifetime. If  
ENGLISH  
particularly limited in temperatures well explode if damaged. Dispose of batteries  
below freezing.  
according to local regulations. Please  
recycle when possible. Do not dispose as  
household waste.  
Do not dispose of batteries in a fire as  
they may explode. Batteries may also  
Care and maintenance  
Your device is a product of superior  
design and craftsmanship and should be  
treated with care. The suggestions below  
will help you protect your warranty  
coverage.  
and electronic components can be  
damaged.  
Do not store the device in hot areas.  
High temperatures can shorten the  
life of electronic devices, damage  
batteries, and warp or melt certain  
plastics.  
Keep all accessories and  
enhancements out of the reach of  
small children.  
Do not store the device in cold areas.  
When the device returns to its normal  
temperature, moisture can form  
inside the device and damage  
electronic circuit boards.  
Keep the device dry. Precipitation,  
humidity, and all types of liquids or  
moisture can contain minerals that  
will corrode electronic circuits. If your  
device does get wet, allow it to dry  
completely.  
Do not attempt to open the device.  
Do not drop, knock, or shake the  
device. Rough handling can break  
internal circuit boards and fine  
mechanics.  
Do not use or store the device in  
dusty, dirty areas. Its moving parts  
ENGLISH  
Do not use harsh chemicals, cleaning  
solvents, or strong detergents to  
clean the device.  
Do not paint the device. Paint can  
clog the moving parts and prevent  
proper operation.  
All of the above suggestions apply  
equally to your device, battery, charger,  
or any enhancement. If any device is not  
working properly, take it to the nearest  
authorized service facility for service.  

Polk Audio polkaudio the speaker specialists DB400 User Manual
Philips BDP3008 User Manual
Pentax K20D User Manual
Panasonic AJ D910WA User Manual
Nikon SCROLL MOUSE HO97859 User Manual
Metra Electronics 95 3305 User Manual
MB QUART Quart Mobil RSC 216 User Manual
Leica Geovid 10x42 BRF User Manual
Kenwood KMD 44 User Manual
JVC KD AR7000 User Manual