Nokia BH 201 User Manual

Nokia Bluetooth Headset BH-201  
3
7
1
2
9
6
4
8
5
12  
13  
10  
11  
Issue1  
Introduction  
The Nokia Bluetooth Headset BH-  
to interference from obstructions,  
201 allows you to make and receive such as walls, or other electronic  
calls while on the move. You can  
use the headset with compatible  
phones that support Bluetooth  
wireless technology.  
devices.  
The headset complies with the  
Bluetooth Specification 2.0 + EDR  
that supports the Headset Profile  
1.1 and Hands-Free Profile 1.5.  
Read this user guide carefully  
before using the headset. Also read Check with the manufacturers of  
the user guide for your phone,  
which provides important safety  
and maintenance information.  
Keep all accessories and  
enhancements out of the reach of  
small children.  
other devices to determine their  
compatibility with this headset.  
There may be restrictions on using  
Bluetooth technology in some  
locations. Check with your local  
authorities or service provider.  
Bluetooth wireless  
technology  
Bluetooth wireless technology  
allows you to connect compatible  
devices without cables. The phone  
and the headset do not need to be  
in line of sight, but they should be  
within 10 meters (30 feet) of each  
other. Connections may be subject  
3
Get started  
Warning: Use only  
chargers approved by  
Nokia for use with this  
The headset contains the following  
parts shown on the title page:  
earpiece wheel (1), charger  
connector (2), indicator light (3),  
microphone (4), power key (5),  
volume key (6), strap lock (7), and  
answer/end key (8).  
particular headset. The use of any  
other types may invalidate any  
approval or warranty and may be  
dangerous.  
For availability of approved  
Before using the headset, you must  
charge the battery and pair the  
headset with a compatible phone.  
Parts of the headset are magnetic.  
Metallic materials may be attracted to  
the headset. Do not place credit cards  
or other magnetic storage media near  
the headset, because information  
stored on them may be erased.  
enhancements, please check with your  
dealer. When you disconnect the  
power cord of any enhancement,  
grasp and pull the plug, not the cord.  
Charge the battery  
The headset has an internal,  
nonremovable, rechargeable  
battery. Do not attempt to remove  
the battery from the headset, as  
you may damage the headset.  
Chargers  
Check the model number of any  
charger before using it with this  
headset. The headset is intended for  
use with the AC-3, AC-4, and DC-4  
chargers.  
1. Connect the charger to a wall  
outlet.  
2. Connect the charger cable to  
the charger connector on the  
headset. The red indicator light  
4
is on while charging. It may take  
a while before charging starts. If  
charging does not start, connect  
the charger again and retry.  
Charging the battery fully may  
take up to 2 hours.  
Switch the headset on or off  
To switch on, press and hold the  
power key until the green indicator  
light starts to flash.  
To switch off, press and hold the  
power key until the red indicator  
light is displayed briefly.  
3. When the battery is fully  
charged, the red indicator light  
turns off. Disconnect the  
charger from the headset and  
the wall outlet.  
Pair the headset  
1. Switch on your phone and the  
headset.  
The fully charged battery has power  
for up to 5 hours and 30 minutes of  
talk-time or up to 150 hours of  
standby time. However, the talk and  
standby times may vary when the  
headset is used with different  
mobile phones or other compatible  
Bluetooth devices, usage settings,  
usage styles, and environments.  
2. Activate the Bluetooth feature  
on the phone, and set the phone  
to search for Bluetooth devices.  
3. Select the headset from the list  
of found devices.  
4. Enter the Bluetooth passcode  
0000 to pair and connect the  
headset to your phone. In some  
phones you may need to make  
the connection separately after  
pairing. You only need to pair  
the headset with your phone  
once.  
When battery power is low, the  
headset sounds a series of beeps,  
and the red indicator light starts to  
flash.  
5
If the pairing is successful, the  
headset beeps and appears in the  
phone menu where you can view  
the currently paired Bluetooth  
devices.  
Basic use  
the headset to the strap, attach the  
shorter part of the strap (with the  
lock) to the headset (12), and  
attach the longer part to the lock  
(13). To release the strap, pull it  
from the lock.  
Place the headset on your ear  
The adjustable earpiece wheel helps  
you keep the headset securely in  
the ear. Rotate the earpiece wheel  
into the most suitable and  
comfortable position for your  
ear (10).  
Change the earbud  
For example, if you use the headset  
on the right ear, you may need to  
rotate the wheel to the right for the  
best fit.  
The headset may be supplied with  
earbuds in different sizes. To  
change the earbud, pull the current  
earbud from the headset (9), and  
Insert the earpiece into your ear in push the new earbud into place,  
a secure and comfortable position, with the wider end first.  
and point the headset toward your  
Call handling  
To make a call, use your phone in  
the normal way when the headset  
is connected to your phone.  
mouth (11).  
Wear the headset  
You can wear the headset on your  
neck using the supplied strap. To fix  
6
If your phone supports last number To adjust the headset volume, press  
redialing with the headset, press  
the answer/end key twice briefly  
when no call is in progress.  
the volume key up or down.  
Clear the settings or reset the  
headset  
To clear the settings, press and hold  
the power key and the answer/end  
key over 10 seconds.  
If your phone supports voice dialing  
with the headset, press and hold  
the answer/end key when no call in  
progress, and proceed as described  
in the user guide of your phone.  
To reset the headset if it does not  
function properly, although it is  
charged, plug the headset into a  
charger, and press the power key  
and the answer/end key at the  
same time.  
To answer or end a call, press the  
answer/end key. To reject an  
incoming call, press the answer/end  
key twice.  
To switch the call between the  
headset and a compatible phone,  
press and hold the answer/end key.  
Battery information  
Your headset is powered by a  
Unplug the charger from the electrical  
rechargeable battery. The battery can plug and the headset when not in use.  
be charged and discharged hundreds  
of times, but it will eventually wear  
out. Recharge your battery only with  
Nokia approved chargers designated  
for this headset.  
Do not leave a fully charged battery  
connected to a charger, since  
overcharging may shorten its lifetime.  
If left unused, a fully charged battery  
will lose its charge over time.  
7
Never use any charger that is  
damaged.  
Battery performance is particularly  
limited in temperatures well below  
freezing.  
Leaving the headset in hot or cold  
places, such as in a closed car in  
summer or winter conditions, will  
Do not dispose of batteries in a fire as  
they may explode. Batteries may also  
reduce the capacity and lifetime of the explode if damaged. Dispose of  
battery. Always try to keep the battery batteries according to local  
between 15°C and 25°C (59°F and  
77°F). A headset with a hot or cold  
battery may not work temporarily,  
even when the battery is fully charged.  
regulations. Please recycle when  
possible. Do not dispose as household  
waste.  
Care and maintenance  
Your device is a product of superior  
design and craftsmanship and should  
be treated with care. The following  
suggestions will help you protect your  
warranty coverage.  
and electronic components can be  
damaged.  
Do not store the device in hot  
areas. High temperatures can  
shorten the life of electronic  
devices, damage batteries, and  
warp or melt certain plastics.  
Keep the device dry. Precipitation,  
humidity, and all types of liquids or  
moisture can contain minerals that  
will corrode electronic circuits. If  
your device does get wet, allow it  
to dry completely.  
Do not store the device in cold  
areas. When the device returns to  
its normal temperature, moisture  
can form inside the device and  
damage electronic circuit boards.  
Do not use or store the device in  
dusty, dirty areas. Its moving parts  
Do not attempt to open the device.  
8
Do not drop, knock, or shake the  
device. Rough handling can break  
internal circuit boards and fine  
mechanics.  
Do not use harsh chemicals,  
cleaning solvents, or strong  
detergents to clean the device.  
Do not paint the device. Paint can  
clog the moving parts and prevent  
proper operation.  
All of the above suggestions apply  
equally to your device, battery,  
charger, or any enhancement. If any  
device is not working properly, take it  
to the nearest authorized service  
facility for service.  
9

RCA SMALL WONDER EZ2120 User Manual
PYLE Audio PL90MU User Manual
Polaroid Studio 4 User Manual
Pioneer Car Stereo System DEH P6000UB User Manual
Panasonic NV S8A User Manual
Oster Blender Electronic Control Blender User Manual
Magnadyne LS4001S User Manual
KitchenAid Blender KHB100 User Manual
Kenwood DUAL DIN SIZED CD RECEIVER DPX MP4110 User Manual
JVC KD SHX700 User Manual