Niles Audio CAM DFMK User Manual

I N S T A L L A T I O N G U I D E  
FOR USE WITH COLOR CCTV CAMERA  
D O M E C A M E R A K I T  
CAM-DFMK  
CONGRATULATIONS!  
Thank you for choosing the CAM-DFMK Dome Camera Kit from Niles. With proper installation  
and operation, you should enjoy years of trouble-free use.  
Niles manufactures the industry’s most complete line of custom installation components and  
accessories for audio/video systems. To see the complete Niles product assortment, visit us on  
the Internet at: www.nilesaudio.com.  
TABLE OF CONTENTS  
Introduction  
2
2
3
8
9
Features  
Installation Considerations  
Limited Warranty  
Warranty Registration Card  
NILES AUDIO CORPORATION – 1-800-BUY-HIFI  
1
INTRODUCTION  
NILES’ CAM-DFMK Dome Camera Kit is designed to enhance the installation options of the CAM-PB  
Color CCTV camera (sold separately). Available in white or black, this unit enables flush-mount or  
surface-mount options for discrete, attractive CCTV camera installation. Please see the CAM-PB color  
CCTV Camera pre-wire and installation instructions for detailed specifications for the CAM-PB.  
The dome assembly can be installed flush-mount or surface-mount depending on the application.  
Installers desiring stealthy, low-profile mounting should use the flush-mount option, while  
retro-fit applications take advantage of the surface-mount option. Hardware is included for both  
installation methods.  
FEATURES  
• Low-Profile/Small Size  
• Flush-Mount/Surface-Mount  
• Easy Assembly/Installation  
2
INSTALLATION  
SURFACE MOUNT  
The surface-mount hardware included with the Dome Camera Kit allows easy installation in  
almost any situation–including retro-fit applications. Provisions must be made for physical wire  
connections, but the camera assembly itself is simply screwed in place.  
TO INSTALL CAMERA USING SURFACE-MOUNT KIT:  
Camera  
housing top  
Main  
bracket  
Figure 1  
Dome  
Camera  
housing base  
1. Drill 3/4” diameter hole in mounting surface to accommodate wiring.  
2. Mount main bracket to desired location using three 1/2” screws.  
Figure 2  
Use 1/2" Screws  
3. Place camera inside of camera housing base. Make sure wires extend through base.  
4. Place camera housing top on camera housing base and secure with two 1/4” screws.  
Figure 3  
Use 1/4" Screws  
3
NILES AUDIO CORPORATION – 1-800-BUY-HIFI  
5. Feed camera leads through hole in mounting surface. Connect wires (see WIRING.)  
6. Place assembled camera housing into main bracket.  
7. Place dome over camera housing and attach to main bracket with 3 large screws.  
Do not tighten completely.  
Figure 4  
Use 1/2" Screws  
8. Make provisions to view the camera image and point the camera at the desired location.  
Note: Make sure image is level!  
9. With camera properly aimed, tighten screws.  
Figure 5  
1. Adjust view  
2.Tighten screws  
WIRING  
NOTE: THE CAM-PB REQUIRES RG6 OR RG59 COAXIAL CABLE FOR VIDEO, AND TWO-CONDUCTOR,  
18 AWG WIRE FOR POWER. USE THE CAMERA’S INCLUDED POWER SUPPLY FOR PROPER  
OPERATION. NO CABLES OR WIRES ARE SHIPPED WITH THE CAMERA KIT.  
RG6 or  
RG59  
Coax  
Figure 6  
Male RCA to  
female F  
connector  
To video display,  
Z880, MOD3000 etc.  
12VDC  
Black  
Red  
Stripe = +  
+
Supplied with CAM-PB  
Remove  
4
FLUSH-MOUNT  
The flush-mount kit is used to acheive low-profile installations where stealth and concealment are  
priorities. A hole must be cut in the desired mounting surface.  
Camera  
housing top  
Main  
bracket  
Figure 7  
Trim ring  
Bayonet  
mount  
Camera  
housing base  
TO INSTALL CAMERA USING FLUSH-MOUNT KIT:  
1. Cut a 3 1/4” diameter hole in mounting surface.  
Figure 8  
3 1/4" inch  
diameter hole  
2. Place camera inside of camera housing base. Make sure wires extend through base.  
3. Place camera housing top on camera housing base and secure with two 1/4” screws.  
Figure 9  
Use 1/4" screws  
4. Connect wires.  
5. Place assembled camera housing into main bracket. Place bayonet mount over camera housing  
and attach to main bracket with three 1/2” screws. Do not tighten completely.  
Figure 10  
Use 1/2" screws  
NILES AUDIO CORPORATION – 1-800-BUY-HIFI  
5
6. Place entire assembly into hole.  
Figure 11  
7. Turn dog screws clockwise until dogs are snug. Over-tightening dogs can keep trim ring from  
snapping in place. If trim ring does not snap into place, loosen screws slightly.  
Figure 12  
Rea  
Rear view  
Front view  
Access holes  
NOTE: ACCESS HOLES ARE PROVIDED TO LOOSEN DOGS IN CASE THEY BECOME STUCK.  
8. Make provisions to view the camera image and point the camera at the desired location.  
IMPORTANT: MAKE SURE THAT THE IMAGE IS LEVEL!  
9. With camera properly aimed, tighten screws.  
10. Align trim ring with slots in bayonnet mount. Snap in place.  
11. To remove trim ring, insert small, flat screwdriver tip into one of three slots on outer edge  
and pry off.  
Figure 13  
6
NOTES  
7
NILES AUDIO CORPORATION – 1-800-BUY-HIFI  
LIMITED WARRANTY  
Niles Audio Corporation (“NILES”) warrants its passive products (those not requiring AC or battery power) to the original  
purchaser to be free of manufacturing defects in material and workmanship for a period of ten years from date of purchase.  
Niles Audio Corporation (“NILES”) warrants its passive loudspeaker products (those not requiring AC or battery power) to  
the original purchaser to be free of manufacturing defects in material and workmanship for a period of five years from  
date of purchase.  
Niles Audio Corporation (“NILES”) warrants its outdoor loudspeaker products to the original purchaser to be free of  
manufacturing defects in material and workmanship for a period of two years from date of purchase.  
NilesAudio Corporation (“NILES”) warrants its active products (those requiringAC or battery power) to the original purchaser  
to be free of manufacturing defects in material and workmanship for a period of two years from date of purchase.  
This Warranty is subject to the following additional conditions and limitations. The Warranty is void and inapplicable if  
NILES deems that the product has been used or handled other than in accordance with the instructions provided by  
the manufacturer, including but not limited to damage caused by accident, mishandling, improper installation, abuse,  
negligence, or normal wear and tear, or any defect caused by repair to the product by anyone other than NILES or an  
authorized NILES dealer.  
To obtain warranty service, take the unit to the nearest authorized NILES dealer, who will test the product and if  
necessary, forward it to NILES for service. If there are no authorized NILES dealers in your area, you must write to NILES  
and include your name, model and serial number of your unit, along with a brief description of the problem. A factory  
Return Authorization Number will be sent to you. DO NOT RETURN ANY UNIT WITHOUT FIRST RECEIVING WRITTEN  
AUTHORIZATION AND SHIPPING INSTRUCTIONS FROM NILES.  
If the above conditions are met, the purchaser’s sole remedy shall be to return the product to NILES, in which case  
NILES will repair or replace, at its sole option, the defective product without charge for parts or labor. NILES will return  
a unit repaired or replaced under warranty by shipping same by its usual shipping method from the factory (only) at its  
expense within the United States of America. THERE ARE NO OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION,  
EITHER EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH  
RESPECT TO THE PRODUCT.  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER/  
PURCHASER. NILES SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES EXCEPT TO THE  
EXTENT PROVIDED (OR PROHIBITED) BY APPLICABLE LAW.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation  
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state.  
For the name of your nearest authorized NILES dealer, contact:  
NILES AUDIO CORPORATION, P.O. BOX 160818, Miami, Florida 33116.  
Please fill in your product information and retain for your records.  
Model______________________ Serial No.___________________ Purchase Date_______  
8
WARRANTY REGISTRATION CARD  
Model Purchased_________________________________________________________  
Serial Number ___________________________________________________________  
Date Purchased (month/day/year)_____________________________________________  
Dealer Name and Location __________________________________________________  
______________________________________________________________________  
Dr.  
Miss  
Mr.  
Mrs.  
Ms.  
Name__________________________________________________________________  
Address________________________________________________________________  
______________________________________________________________________  
City_______________________________________State________________Zip______  
Telephone (  
) _________________________________________________  
Please take a moment to fill out our warranty registration card. The information helps us to get to  
know you better and develop the products you want  
Age:  
Musical tastes:  
(Please check  
all that apply)  
What magazines  
do you read?  
Do you . . . ?  
Under 25  
Own a House. If yes,  
25-34  
1. ________________  
how many square feet?  
35-44  
Alternative  
2. ________________  
3. ________________  
45-54  
55 & over  
Classical  
Country  
Own a Town House/  
Jazz  
Condominium/Co-op  
Income:  
New Age  
Rent an Apartment  
Rent a House  
Who will install  
the product?  
Under $24,999  
Popular  
$25,000-$34,999  
$35,000-$44,999  
$45,000-$59,999  
$60,000-$74,999  
$75,000-$99,999  
Over $99,999  
R&B  
Custom Installer  
Rock  
Are you interested in  
receiving literature on  
other Niles products?  
Electrician  
Other _____________  
Friend  
Myself  
How did you hear  
about Niles?  
Yes  
No  
Which factor(s) influenced  
the purchase of your Niles  
product? (Please check  
all that apply)  
Architect/Developer  
Are there products/  
capabilities that you would  
like to see introduced?  
Occupation:  
Custom Installer  
Arts/Entertainment  
Direct Mail  
Business Owner  
Friend/Family  
Ease of Use  
Engineer  
In-Store Display  
Price/Value  
Finance/Accounting  
Interior Designer  
Product Features  
General Office  
Magazine Ad  
Quality/Durability  
Management  
Mail-Order Catalog  
Reputation  
Professional  
Newspaper Ad  
Style/Appearance  
Sales/Marketing  
Product Brochure  
Warranty  
Student  
Product Review  
Tradesperson  
Retail Salesperson  
®
BL E N D I N G HI G H FI D E L I T Y AN D AR C H I T E C T U R E  
N i l e s A u d i o C o r p o r a t i o n  
1 2 3 3 1 S . W . 1 3 0 S t r e e t M i a m i , F l o r i d a 3 3 1 8 6  
D e s i g n e d a n d E n g i n e e r e d i n t h e U S A  
M a d e i n C h i n a  
©2005 Niles Audio Corporation. All rights reserved. Niles, the Niles logos and  
Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation.  
All other trademarks are the property of their respective owners. 12/05 DS00470ACN 9900802  
A

Radio Shack CID 932 User Manual
QSC Audio Car Speaker KW122 User Manual
QSC Audio Car Amplifier CMX500V User Manual
Planar Touch Monitor LX1200TI User Manual
Pioneer SUPER TUNER 3 D AVIC X920BT User Manual
Philips AW 7495 User Manual
Panasonic Lumix Mirrorless Camera DMC GF3 User Manual
OPPO Digital Blu ray Disc Player BDP 105 User Manual
Lochinvar SB 1500 User Manual
Kodak IMAGE SENSOR KAF 10500 User Manual