DIGITAL CAMERA
User’s Manual
En
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed
in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using this Nikon
product, to prevent possible injury.
WARNINGS
Turn off in the event of
malfunction
Should you notice smoke or an
Do not use the camera or AC
adapter in the presence of
flammable gas
Do not use electronic equipment in
the presence of flammable gas, as this
could result in explosion or fire.
unusual smell coming from the
camera or AC adapter, unplug the AC
adapter and remove the battery
immediately, taking care to avoid
burns. Continued operation could
result in injury. After removing or
disconnecting the power source, take
the equipment to a Nikon-authorized
service representative for inspection.
Handle the camera strap with
care
Never place the strap around the neck
of an infant or child.
Keep out of reach of children
Particular care should be taken to
prevent infants from putting the
battery or other small parts into their
mouths.
Do not disassemble
Touching the internal parts of the
camera or AC adapter could result in
injury. Repairs should be performed
only by qualified technicians. Should
the camera or AC adapter break open
as the result of a fall or other accident,
take the product to a Nikon-authorized
service representative for inspection,
after unplugging the product and/or
removing the battery.
ii
For Your Safety
Observe caution when
handling the battery
The battery may leak or explode if
improperly handled. Observe the
following precautions when handling
the battery for use in this product:
• Before replacing the battery, turn
the product off. If you are using the
AC adapter (available separately), be
sure to unplug the AC adapter from
an electrical power outlet.
• Use only a Rechargeable Li-ion
Battery EN-EL12 (supplied). Charge
the battery by inserting it in a
Battery Charger MH-65 (supplied).
• When inserting the battery, do not
attempt to insert it upside down or
backwards.
• If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty
of water.
Observe the following
precautions when handling
the battery charger
• Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
• Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could
result in fire.
• Do not handle the power cable or
go near the battery charger during
lightning storms. Failure to observe
this precaution could result in
electric shock.
• Do not damage, modify, forcibly tug
or bend the power cable, place it
under heavy objects, or expose it to
heat or flames. Should the insulation
be damaged and the wires become
exposed, take it to a Nikon-
authorized service representative for
inspection. Failure to observe these
precautions could result in fire or
electric shock.
• Do not handle the plug or battery
charger with wet hands. Failure to
observe this precaution could result
in electric shock.
• Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC-
to-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.
• Do not short or disassemble the
battery or attempt to remove or
break the battery insulation or
casing.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to
water.
• Replace the terminal cover when
transporting the battery. Do not
transport or store with metal objects
such as necklaces or hairpins.
• The battery is prone to leakage
when fully discharged. To avoid
damage to the product, be sure to
remove the battery when no charge
remains.
• Discontinue use immediately should
you notice any change in the
battery, such as discoloration or
deformation.
iii
For Your Safety
Use appropriate cables
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the
purpose, to maintain compliance with
product regulations.
Avoid contact with liquid
crystal
Should the monitor break, care should
be taken to avoid injury caused by
broken glass and to prevent liquid
crystal from the monitor touching the
skin or entering the eyes or mouth.
Handle moving parts with
care
Be careful that your fingers or other
objects are not pinched by the lens
cover or other moving parts.
Turn the power off when
using inside an airplane or the
hospital
Turn the power off while inside the
airplane during take off or landing.
Follow the instructions of the hospital
when using while in a hospital. The
electromagnetic waves given out by
this camera may disrupt the electronic
systems of the airplane or the
CD-ROMs
The CD-ROMs supplied with this
device should not be played back on
audio CD equipment. Playing CD-
ROMs on an audio CD player could
cause hearing loss or damage the
equipment.
instruments of the hospital.
Observe caution when using
the projector or movie light
• Do not look directly into the
Observe caution when using
the flash
Using the flash close to your subject’s
eyes could cause temporary visual
impairment. Particular care should be
observed if photographing infants,
when the flash should be no less than
one meter (3 ft. 4 in.) from the subject.
projector window or project images
or shine the movie light in or near
human eyes. This could damage the
eyes or result in visual impairment.
• Do not project images or shine the
movie light towards the driver of a
motor vehicle. Doing so may result
in an automobile accident.
Do not operate the flash with
the flash window touching a
person or object
Failure to observe this precaution
could result in burns or fire.
iv
Notices
Notice for Customers in the U.S.A.
Federal Communications
Commission (FCC) Radio
Frequency Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable
protection against harmful
CAUTIONS
Modifications
The FCC requires the user to be
notified that any changes or
modifications made to this device that
are not expressly approved by Nikon
Corporation may void the user’s
authority to operate the equipment.
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an
experienced radio/television
technician for help.
Interface Cables
Use the interface cables sold or
provided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
Notice for customers in the State of
California
WARNING
Handling the cord on this product will
expose you to lead, a chemical known
to the State of California to cause birth
defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road
Melville, New York 11747-3064
USA
Tel: 631-547-4200
v
Notices
appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
Notice for customers in Canada
CAUTION
This Class B digital apparatus complies
with Canadian ICES-003.
ATTENTION
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
Notices for customers in Europe
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO THE
INSTRUCTIONS.
This symbol indicates that
this product is to be
collected separately.
The following apply only to
users in European countries:
• This product is designated for
separate collection at an
appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
This symbol on the battery
indicates that the battery is
to be collected separately.
The following apply only to
users in European countries:
• All batteries, whether marked with
this symbol or not, are designated
for separate collection at an
vi
Table of Contents
For Your Safety......................................................................................................................................ii
WARNINGS..................................................................................................................................................................ii
Attaching the Camera Strap............................................................................................................................7
The A (Shooting Mode) Button...................................................................................................................8
The c (Playback) Button..................................................................................................................................8
The b (Movie-record) Button........................................................................................................................9
The P (Projector) Button................................................................................................................................9
Dragging...................................................................................................................................................................10
Using the Stylus....................................................................................................................................................11
First Steps............................................................................................................................................. 18
Removing the Battery.......................................................................................................................................21
vii
Table of Contents
Basic Photography and Playback: G (Easy Auto) Mode..................................................... 26
Step 1 Turn the Camera On and Select G (Easy Auto) Mode .............................................26
Indicators Displayed in G (Easy Auto) Mode....................................................................................27
Step 3 Focus and Shoot.....................................................................................................................30
Playing Back Pictures (Playback Mode)..................................................................................................32
m Flash Mode ........................................................................................................................................................34
n Taking Pictures with the Self-timer ...................................................................................................37
A Image Mode (Image Quality/Image Size) .....................................................................................39
q Tapping the Monitor to Release the Shutter (Touch Shutter)..........................................41
r Tapping the Monitor to Focus (Touch AF/AE) ..........................................................................44
o Changing the Brightness Using Exposure Compensation.................................................47
Taking Pictures with the Remote Control...................................................................................48
Selecting a Shooting Mode..............................................................................................................49
G Easy Auto Mode .............................................................................................................................50
Shooting in A (Auto) Mode ............................................................................................................52
Adjusting the A (Auto) Mode setting.........................................................................................53
p Macro Mode ....................................................................................................................................................54
s Subject Tracking (Focusing on a Moving Subject).................................................................55
E ISO Sensitivity.................................................................................................................................................57
C Continuous ......................................................................................................................................................58
w White Balance (Adjusting Hue)...........................................................................................................59
Shooting Suited to Scenes (Scene Mode)...................................................................................61
Changing the Smart Portrait Mode Settings......................................................................................75
viii
Table of Contents
Taking a Closer Look: Playback Zoom..........................................................................................82
Selecting Playback Mode..................................................................................................................83
Operations in Favorite Pictures Mode....................................................................................................88
Operations in Auto Sort Mode....................................................................................................................93
Operations in List by Date Mode...............................................................................................................95
Playing Back Pictures by Rating..................................................................................................................97
b Enjoying Slide Show.....................................................................................................................98
d Protecting Important Pictures (Protect)...............................................................................99
Protecting Multiple Pictures ......................................................................................................................100
Removing Protection from Pictures......................................................................................................100
a Creating a DPOF Print Order: Print Set................................................................................ 101
Creating a Print Order for One Picture ................................................................................................101
Creating a Print Order for Multiple Pictures.....................................................................................103
Canceling Print Order.....................................................................................................................................104
f Rotate Image ................................................................................................................................ 105
E Voice Memos: Recording and Playback ............................................................................... 106
Recording Voice Memos..............................................................................................................................106
Playing Voice Memos.....................................................................................................................................107
Deleting Voice Memos..................................................................................................................................107
ix
Table of Contents
Editing Functions.............................................................................................................................. 108
U Paint...................................................................................................................................................................110
k Quick Retouch: Enhancing Contrast and Saturation..........................................................113
I D-Lighting: Enhancing Brightness and Contrast...................................................................114
P Stretch: Stretching Pictures.................................................................................................................115
O Perspective Control: Adjusting a Sense of Perspective.....................................................116
i Filter Effects (Digital Filter) ....................................................................................................................117
j Glamour Retouch.......................................................................................................................................119
g Small Picture: Making Smaller Pictures........................................................................................121
o Crop: Creating a Cropped Copy........................................................................................................122
Movie Recording and Playback..................................................................................................123
Changing the Movie Recording Settings ..........................................................................................125
D Movie Options.............................................................................................................................................125
m Movie Light .................................................................................................................................................126
n Movie AF Mode........................................................................................................................................127
Movie Playback.................................................................................................................................. 128
Connecting to Televisions, Computers and Printers..........................................................129
Connecting to a TV........................................................................................................................... 129
Before Connecting the Camera...............................................................................................................131
Transferring Images from a Camera to a Computer...................................................................132
Connecting the Camera to a Printer.....................................................................................................137
Printing Pictures One at a Time ...............................................................................................................138
Printing Multiple Pictures............................................................................................................................139
x
Table of Contents
c Welcome Screen........................................................................................................................................144
d Date....................................................................................................................................................................145
e Monitor Settings .......................................................................................................................................148
f Date Imprint (Imprinting Date and Time)..................................................................................149
g Vibration Reduction................................................................................................................................150
h AF Assist ........................................................................................................................................................151
u Digital Zoom................................................................................................................................................152
i Sound Settings ..........................................................................................................................................152
k Auto Off...........................................................................................................................................................153
l/m Format Memory/Format Card...................................................................................................154
n Language........................................................................................................................................................155
J Interface .........................................................................................................................................................155
d Blink Warning...............................................................................................................................................156
p Reset All...........................................................................................................................................................158
r Firmware Version ....................................................................................................................................162
Displaying Pictures with the Projector (Projector Mode)................................................... 163
Projecting Pictures...........................................................................................................................................163
Using Projector Mode....................................................................................................................................166
Projecting Movies.............................................................................................................................................167
b Projector Slide Show...............................................................................................................................169
Operating the Projector Settings Menu.............................................................................................172
z Power Saving ..............................................................................................................................................172
k Auto Off...........................................................................................................................................................173
Tone Compensation ......................................................................................................................................173
xi
Table of Contents
Cleaning .................................................................................................................................................................177
Storage....................................................................................................................................................................177
Approved Memory Cards............................................................................................................................179
Error Messages................................................................................................................................... 181
Supported Standards.....................................................................................................................................197
Index...................................................................................................................................................... 198
xii
Introduction
About This Manual
Thank you for your purchase of a Nikon COOLPIX S1100pj digital camera. This
manual was written to help you enjoy taking pictures with your Nikon digital
camera. Read this manual thoroughly before use, and keep it where all those who
use the product will read it.
Symbols and Conventions
To make it easier to find the information you need, the following symbols and
conventions are used:
This icon marks cautions,
This icon marks tips, additional
information that should be read
information that may be helpful
B
C
D
before use, to prevent damage to
the camera.
when using the camera.
This icon marks notes, information
that should be read before using
the camera.
This icon indicates that more
information is available elsewhere
in this manual.
A
Notations
• Secure Digital (SD) memory card, SDHC memory card, and SDXC memory card
are referred to as “memory card.”
• The setting at the time of purchase is referred to as the “default setting.”
• The names of menu items displayed in the camera monitor, and the names of
buttons or messages displayed on a computer monitor appear in bold.
Screen Samples
In this manual, images are sometimes omitted from monitor display samples so
that monitor indicators can be more clearly shown.
Illustrations and Screen Display
Illustrations and text displays shown in this manual may differ from actual display.
C Internal Memory and Memory Cards
Pictures taken with this camera can be stored in the camera’s internal memory or on removable
memory cards. If a memory card is inserted, all new pictures will be stored on the memory card and
delete, playback and format operations will apply only to the pictures on the memory card. The
memory card must be removed before the internal memory can be formatted or accessed for
picture storage, deletion, or viewing.
1
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,
continually updated information is available online at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. Visit the site below for
contact information:
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, and AC
adapters) certified by Nikon specifically for use with this Nikon digital camera are engineered and
proven to operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the
Nikon holographic seal could interfere with normal operation of the
camera or result in the batteries overheating, igniting, rupturing, or
Holographic seal:
leaking.
Identifies this device as an
For more information about Nikon brand accessories, contact a local
authentic Nikon product.
authorized Nikon dealer.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.
About the Manuals
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in
these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this product.
• While every effort was made to ensure that the information in these manuals is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).
2
Information and Precautions
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction
of paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless
the prior permission of the government was obtained, the copying or reproduction of unused
postage stamps or post cards issued by the government is prohibited. The copying or
reproduction of stamps issued by the government and of certified documents stipulated by law is
prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies
and private groups, ID cards and tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies and photographs is governed by national and
international copyright laws. Do not use this product for the purpose of making illegal copies or to
infringe copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or built-
in camera memory does not completely erase the original image data. Deleted files can sometimes
be recovered from discarded storage devices using commercially available software, potentially
resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s
responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or format the device and then completely refill it with images
containing no private information (for example, pictures of empty sky). Be sure to also replace any
to property when physically destroying data storage devices.
3
Parts of the Camera
The Camera Body
1
2
3
4
5
6
7
Under the
connector cover
8
9
10
11
15
14 13
Lens cover closed
12
1
2
Shutter-release button..............................30
Self-timer lamp...............................................37
8
9
Power switch/power-on lamp
3
4
5
6
7
Flash......................................................................34
Projector focus dial...................................163
USB/audio/video output connector
15
4
Parts of the Camera
Remote Control ML-L5
and to play back movies.
Before using the remote control for the first time, remove
the insulating sheet by pulling it in the direction indicated.
1
2
Infrared emitter
1
2
Zoom button (shooting mode)
f: wide
g: tele
Zoom button (projector mode)
h: thumbnail playback
i: playback zoom
–: decrease volume
+: increase volume
3
4
5
H, I, J, or K (up, down, left, or right
selection) button
3
4
5
6
Apply selection button
P (projector) button
b (slide show) button
6
See the following pages for details of the operation of the remote control.
B Notes on the Remote Control Battery
• When changing the remote control battery, be sure that the battery’s positive (+) and negative (–)
terminals are oriented correctly.
• Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery”
6
Parts of the Camera
Replacing the Remote Control Battery
1
2
3
Push the tab in the
direction indicated
above.
While holding the tab in,
grasp the edge of the
battery holder with your
fingernail and pull it
straight out.
Remove the used 3V
CR2025 lithium battery.
4
5
Place a new 3V CR2025
lithium battery in the
battery holder. Be sure
that the “+” mark is
facing up.
Insert the battery holder
into the remote control.
Attaching the Camera Strap
7
Basic Operations
Shutter-release Button
The camera features a two-stage shutter-release button. To set focus and
exposure, press the shutter-release button halfway, stopping when you feel
resistance. Focus and exposure lock while the shutter-release button is held in this
position. To release the shutter and take a picture, press the shutter-release button
the rest of the way down. Do not use force when pressing the shutter-release
button, as this may result in camera shake and blurred pictures.
Press the
Press the
shutter-release
button halfway
to set focus and
exposure
shutter-release
button the rest
of the way down
to take picture
The A (Shooting Mode) Button
• Press the A button in playback mode or
projector mode to enter shooting mode.
• Press the A button in shooting mode to display
the shooting-mode selection menu and switch
The c (Playback) Button
• Press the c button in shooting mode to enter
playback mode.
• Press the c button in playback mode or
projector mode to display the playback-mode
selection menu and switch playback modes
• If the camera is turned off, hold down the c
button to turn the camera on in playback mode.
8
Basic Operations
The b (Movie-record) Button
• Press the b (movie-record) button in shooting
b (movie-record) button again to stop movie
recording.
• Press the b (movie-record) button in playback
mode to enter shooting mode.
The P (Projector) Button
• Press the P button in shooting mode or playback
mode to switch to projector mode.
• Press the P button again to end projector mode.
Projector focus dial
9
Operating the Touch Panel
The monitor on the COOLPIX S1100pj is a touch panel display. Use a finger or the
supplied stylus to operate the touch panel.
Tapping
Tap the touch panel.
Use this operation to:
Select icons or other controls
Drag the tab to display the setting controls during
Dragging
Drag your finger across the touch panel and
remove it from the touch panel.
Use this operation to:
Scroll through pictures in full-frame playback mode
Move the visible portion of a picture enlarged with
Dragging and Dropping
Place your finger on the touch panel, drag it to
the desired location ( ), and remove it from
1
the touch panel ( ).
2
Use this operation to:
Select a picture to view with slide show in projector
10
Operating the Touch Panel
Using the Stylus
Use the stylus for operations, such as when using
precision than using a finger.
Attaching the Stylus
Attach the stylus to the strap as shown.
B Notes on the Touch Panel
• Do not press on the touch panel with pointed objects other than the supplied stylus.
• Do not apply unnecessary pressure to the touch panel.
B Notes on Tapping/Dragging
• The camera may not respond if your finger is left in one place too long.
• The camera may not respond if the followings are made.
- Bounce your finger off the display
- Drag your finger over too short a distance
- Stroke the display too lightly
- Move your finger too quickly
B Notes on the Touch Panel
• Keep the stylus out of reach of small children.
• Do not carry the camera by the stylus. The stylus may slip off the strap and the camera may fall.
11
Main Display of the Monitor/Touch Panel and Basic Operations
Shooting (Information Display)
Displayed information on the monitor varies depending on the camera settings or
status.
4
5
1 2 3
6 7 8
18
17
9
16
15
14
10
23
50
a
23
1
1
00
b
1/250 F3.9
00
11
13 12
1
1
2
3
4
5
a Number of exposures remaining
2
17 Focus area (center)
O
“Date not set” indicator..................... 181
6
Date imprint indicator ....................... 149
Travel destination icon .......................... 145
7
8
9
Oq
Vibration reduction icon................... 150
1
2
Indicators displayed vary with current shooting mode.
Indicator is displayed when there are 50 or fewer exposures remaining.
12
Main Display of the Monitor/Touch Panel and Basic Operations
Shooting (Operation Controls)
Tap the following controls to change settings.
• Tap the tab to display the setting controls and shooting settings can be
• The controls available and indicators displayed vary with shooting mode and
the current camera settings.
1
4
OFF
AUTO
2
AUTO
0.0
3
1
2
3
4
Scene effect adjustment slider ............63
C Monitor Display in Portrait (“Tall”) Orientation
When the camera is held in portrait (“tall”) orientation, the controls and indicators are also displayed
in portrait (“tall”) orientation. Controls and indicators may not be appropriately rotated when the
camera is pointing up or down.
AUTO
0.0
OFF
AUTO
AUTO
AUTO
0.0
OFF
13
Main Display of the Monitor/Touch Panel and Basic Operations
Playback (Information Display)
The following monitor display shows information for the picture currently
displayed and camera status.
• The displayed information vary depending on the picture played back and the
current camera status.
• Indicators below are displayed when turning on the camera or operating the
1 2
3
4 5 6 7
15/11/2010 15:30
0004. JPG
8
9
10
4
/
4
4
4
a
/
9999 9999
1
1
00
00
b
12
11
1
1
2
3
i
9
2
4
a
2
5
Print-order icon .......................................... 101
Album icon in
a Current frame number/
6
3
7
Category icon in
3
8
1
2
3
Indicators displayed vary with current playback mode.
Indicators displayed vary depending on the setting for shooting.
The icon for the selected album or category in auto sort mode currently selected in
playback mode is displayed.
14
Main Display of the Monitor/Touch Panel and Basic Operations
Playback (Operation Controls)
Tap the following controls to change settings.
• Tap the tab to display the setting controls and deleting or editing can be
• The controls available and indicators displayed vary with the picture played
back and the current camera settings.
1
2
3
1
2
Movie playback........................................... 128
3
C Picture Display
When the camera is rotated, the picture and controls displayed are also rotated as indicated below.
Pictures and controls may not be appropriately rotated when the camera is pointing up or down.
15
Main Display of the Monitor/Touch Panel and Basic Operations
Operating the Tabs
When in shooting or playback mode, use the setting controls to make shooting or
playback settings. Display the controls by tapping the tab at the bottom, left and
right sides of the monitor.
• Tap the icon of the desired item to display the setting screen for that item.
• Tap z (setup) in the setting controls to make the basic camera settings.
• When H or J is displayed on the setting screen, tap H to exit the setting
screen. Tap J to return to the previous screen.
• Tap the tab again to hide the setting controls.
Tap the tab to display the
icons of settings that can
be changed in the
23
current mode.
Tap an icon to display the
setting screen of that
item.
Tap the tab again to hide
the setting controls.
OFF
0.0
Tap z to display the setup
menu.
Tap an icon to apply the
setting of that item.
Return to the previous
screen.
Image mode
4320×3240
16
Main Display of the Monitor/Touch Panel and Basic Operations
Shooting
Shooting settings can be made.
• Each icon also indicates the current setting.
m
1
Touch shooting
1
Touch AF/AE .....................................44
q
r
s
2
3
2
3
OFF
AUTO
z
AUTO
0.0
Playback
Pictures can be edited and deleted, and playback settings can be made.
• The available setting items vary depending on the type of picture or playback
mode.
1
2
3
Rating...................................................................97
5
4
3
2
1
0
h Add pictures to albums (except in
favorite pictures mode) ...................84
Remove pictures from albums (in
1
favorite pictures mode) ...................87
E
2
3
z
17
First Steps
Charging the Battery
Charge the Rechargeable Li-ion Battery EN-EL12 (supplied) using the Battery
Charger MH-65 (supplied).
1
Connect the power cable in the order indicated below.
2
Insert the battery into the battery charger
by sliding the battery forward ( ), and
1
press down until it locks into place ( ).
2
•
•
CHARGE lamp starts blinking when charging
begins.
About 2 hours 30 minutes are required to charge a
fully exhausted battery.
18
Charging the Battery
The following chart explains CHARGE lamp status.
CHARGE lamp Description
Blinks
Battery charging.
On
Battery fully charged.
•
•
•
The battery is not inserted correctly. Remove the battery and
reinsert it into the battery charger so that the battery is lying
flat.
The ambient temperature is not suited to charging. Charge
the battery indoors with an ambient temperature of 5 °C to
35 °C (41 °F to 95 °F) before use.
The battery is faulty. Stop charging immediately, unplug the
charger, and take both the battery and charger to your retailer
or Nikon-authorized service representative.
Flickers
3
Remove the battery and unplug the charger when charging is
complete.
B Notes on the Battery Charger
• The supplied battery charger is for use only with the Rechargeable Li-ion Battery EN-EL12.
• Be sure to read and follow the warnings for the battery charger on page iii before using the battery
charger.
B Notes on the Battery
• Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery”
• If the battery is not used for an extended period, recharge it at least once every six months and
completely exhaust it before returning it to storage.
C Note on AC Power Supply
from an electrical outlet and taking pictures and playing back pictures are available with this
camera.
• Do not, under any circumstances, use another make or model of AC adapter other than EH-62F.
Failure to observe this precaution could result in overheating or in damage to the camera.
19
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.
• Charge the battery before the first use or when the battery is running low
1
2
Open the battery-chamber/memory card slot
cover.
Slide the cover latch to the Y side ( ) and open the
1
cover( ).
2
Insert the battery.
Confirm that the battery’s positive (+) and negative (–)
terminals are oriented correctly as shown on the label at
the battery chamber opening, and insert the battery.
Use the battery to push up the orange battery latch in the
direction indicated by the arrow ( ) and fully insert the
1
battery ( ).
2
When the battery is fully inserted, the battery latch will
lock it in place.
B Inserting the Battery
Inserting the battery upside down or backwards could
damage the camera. Be sure to check that the battery is in
the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
Close the cover ( ), and slide the cover latch ( ) to the
1
2
Z side.
20
Inserting the Battery
Removing the Battery
Turn the camera off and be sure that the power-on
lamp and the monitor have turned off before opening
the battery-chamber/memory card slot cover.
To eject the battery, open the battery-chamber/
memory card slot cover and slide the orange battery
latch in the direction indicated by the arrow ( ). The
1
battery can then be removed by hand ( ).
2
• Note that the camera, battery, and memory card
may become hot during use; observe due caution when removing the battery
and memory card.
Turning On and Off the Camera
To turn on the camera, press the power switch. The
power-on lamp (green) will light for a moment and the
monitor will turn on.
To turn off the camera, press the power switch again.
When the camera is turned off, both the power-on
lamp and monitor will turn off.
• If the camera is turned off, hold down the c button to turn the camera on in
C Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will blink. If no operations are performed for another three minutes,
the camera will turn off automatically.
To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:
- Power switch, shutter-release button, A button, c button or b (movie-record) button
• Camera enters standby mode in about a minute (default setting) during shooting or playback
mode. The time allowed to elapse before the camera enters standby mode can be changed from
setting). The time allowed to elapse before the camera enters standby mode can be changed from
21
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.
1
2
Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
Tap the desired language.
Language
Dansk
If the desired language is not displayed, tap B or C to
Čeština
view other language options.
Deutsch
Español
Français
English
Ελληνικά
Indonesia
For more information about operating the touch panel,
.
3
Tap Yes.
Date
Set time and date?
If No is tapped, the date and time will not be set.
Yes
No
4
Tap E or F to select your home time zone
Home time zone
London
Casablanca
Tap J to return to the previous screen.
D Daylight Saving Time
If daylight saving time is in effect, tap p in the time zone selection
screen displayed in step 4 to turn on the daylight saving time
option.
Home time zone
London
Casablanca
When the daylight saving time option is enabled, W is displayed at
the top of the monitor. To turn off the daylight saving time option,
tap p again.
22
Setting Display Language, Date and Time
5
6
7
Tap the order in which the day, month, and
year are displayed.
Date
MDY
YMD
YMD
YMD
DMY
:
01
01
15
01 2010 00 00
Edit the date and time.
Date
Tap the desired item and A or B to edit the highlighted
item.
MDY
DMY
:
01 2010 00 00
Tap I.
Date
The clock is activated and the camera enters shooting
mode.
MDY
DMY
:
11 2010 14 30
C Imprinting and Changing the Date and Time
• To imprint the date on pictures when shooting, enable date imprint from the Date imprint
daylight saving time settings.
23
Inserting Memory Cards
Image, sound, and movie files are stored in the camera’s internal memory
(approximately 79 MB) or on removable Secure Digital (SD) memory cards
If a memory card is inserted in the camera, data are automatically stored on
the memory card and data recorded to the memory card can be played back,
deleted or transferred. Remove the memory card to store data in the internal
memory, or play back, delete or transfer data from the internal memory.
1
Be sure that the power-on lamp and the
monitor are off and open the battery-
chamber/memory card slot cover.
Be sure to turn off the camera before opening the
battery-chamber/memory card slot cover.
2
Insert the memory card.
Slide the memory card in correctly until it clicks into
place.
Close the battery-chamber/memory card slot cover.
B Inserting Memory Cards
Inserting the memory card upside down or backwards
could damage the camera or the memory card. Be sure to
check that the memory card is in the correct orientation.
Removing Memory Cards
Before removing memory cards, turn the camera off
and confirm that the power-on lamp and monitor are
off. Open the battery-chamber/memory card slot cover
and press the card in ( ) to partially eject the card. The
1
card can then be removed by hand. Do not attempt to
remove the card at an angle ( ).
2
• Note that the camera, battery, and memory card
may become hot during use; observe due caution when removing the battery
and memory card.
24
Inserting Memory Cards
B Formatting Memory Cards
If the message at right is displayed when the camera is turned on,
formatting permanently deletes all pictures and other data on
the memory card. Be sure to make copies of any pictures you wish
to keep before formatting the memory card.
Card is not formatted.
Format card?
Tap Yes to format. When the confirmation dialog is displayed, tap
Yes. To start formatting, tap OK.
Yes
No
• Do not turn the camera off or open the battery-chamber/memory
card slot cover until formatting is complete.
• Be sure to use this camera to format memory cards previously used in other devices the first time
B The Write Protect Switch
Memory cards are equipped with a write protect switch. When
this switch is in the “lock” position, data cannot be written to,
or deleted from, the memory card. If the switch is in the “lock”
position, unlock it by sliding the switch to the “write” position
to record or delete pictures, or to format the memory card.
Write protect switch
B Memory Cards
• Use only Secure Digital memory cards.
• Do not perform the following during formatting, while data is being written to or deleted from the
memory card, or during data transfer to a computer. Failure to observe this precaution could result
in the loss of data or in damage to the camera or memory card:
- Take out the battery or memory card
- Turn off the camera
- Disconnect the AC adapter
• Do not format the memory card using a computer.
• Do not disassemble or modify.
• Do not drop, bend, or expose to water or strong physical shock.
• Do not touch the metal terminals with your fingers or metal objects.
• Do not affix labels or stickers to the memory card.
• Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.
• Do not expose to humidity, dust, or corrosive gases.
25
Basic Photography and Playback: G (Easy Auto) Mode
Step 1 Turn the Camera On and Select
G
(Easy Auto) Mode
In G (easy auto) mode, the camera automatically selects the optimum shooting
mode by framing a picture, allowing you to easily take pictures using a shooting
1
Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
G (easy auto) mode is initially activated at the time of
purchase. Proceed to step 4.
2
Press the A button to display the
shooting-mode selection menu.
3
4
Tap G in the monitor.
Shooting mode
Easy auto mode
The camera enters G (easy auto) mode.
Check the battery level indicator and the
number of exposures remaining.
Battery level indicator
Battery level
Description
indicator
NO INDICATOR
Battery fully charged.
Battery low. Prepare to charge or
replace the battery.
23
B
Number of exposures
remaining
N
Cannot take pictures. Recharge or
replace with a fully charged
battery.
Battery
exhausted.
Number of Exposures Remaining
Indicator is displayed when there are 50 or fewer exposures remaining.
The number of pictures that can be stored depends on the capacity of the internal
26
Step 1 Turn the Camera On and Select G (Easy Auto) Mode
Indicators Displayed in G (Easy Auto) Mode
Shooting mode
Vibration reduction
indicator
The effects of camera shake
are reduced.
In easy auto mode, G,
e, f, g, h, j, or i is
displayed to indicate the
shooting mode selected
by the camera for the
current subject and
framing.
23
Internal memory indicator
Indicates that images will be stored in the camera’s internal memory (approximately
79 MB).
When a memory card is inserted in the camera, C does not appear and images will be
stored on the memory card.
To reactivate the monitor after it is turned off by the power saving function in
-
Power switch, shutter-release button, A button or b (movie-record) button
B Note on Touch Shutter
At the default setting, the shutter can be released by simply tapping a subject in the monitor
D Functions Available in G (Easy Auto) Mode
• When the camera is pointed at a human face, the face detection function, with which the camera
controls.
D Vibration Reduction
• Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
27
Step 2 Frame a Picture
1
Ready the camera.
Hold the camera steadily in both hands, keeping your
fingers and other objects away from the lens, flash, AF-
assist illuminator, and built-in microphone.
When taking pictures in portrait (“tall”) orientation, turn
the camera so that the built-in flash is above the lens.
2
Frame the picture.
Shooting mode indicator
When the camera automatically selects the optimum
scene mode, the shooting mode indicator will be
A face detected by the camera will be framed by a yellow
double border (focus area).
Up to 12 faces can be detected. If more than one face is
detected, the face closest to the camera will be framed by
a double border, and the others by a single border.
23
When taking pictures of subjects other than people, or framing a subject with which no
face is detected, a focus area will not be displayed. Frame the picture so that the
intended subject is at or near the center of the frame.
B Notes on G (Easy Auto) Mode
• The desired scene mode may not be selected in certain condition. In this case, select another
shooting mode.
• When digital zoom is in effect, shooting mode is G.
28
Step 2 Frame a Picture
Using the Zoom
Rotate the zoom control to g or f to activate optical
zoom.
Zoom out
Zoom in
• To zoom in so that the subject fills a larger area of the
frame, rotate to g.
• To zoom out so that the area visible in the frame
increases, rotate to f.
• The zoom position is set at the maximum wide-angle
position when the camera is turned on.
• A zoom indicator is displayed in the monitor during
zooming.
Optical Digital
zoom zoom
Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, rotating
and holding the zoom control at g triggers digital zoom. The subject is magnified
up to 4× the maximum optical zoom ratio.
The camera focuses at the center of the frame and the focus area is not displayed
when digital zoom is in effect.
Maximum
optical zoom
Digital zoom
enabled
C Digital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
digital zoom magnification.
Interpolation is applied at zoom positions beyond V when taking still pictures. When zoom is
increased beyond the V position, interpolation is initiated and the zoom indicator turns yellow to
indicate that interpolation is being applied. The position of V moves to the right as image size
decreases, allowing for confirmation of the zoom positions at which shooting without interpolation
is possible at the current image mode setting.
Small image size
29
Step 3 Focus and Shoot
1
Press the shutter-release button halfway.
Focus is locked when the shutter-release button is
When a face is detected, it is framed by the double
border indicating the active focus area. When the subject
is in focus, the double border turns green.
1/250 F3.9
Aperture
Shutter speed
The camera automatically selects the focus area (up to nine areas) suitable to the
is displayed in green.
When digital zoom is used, the focus area is not displayed
and the camera focuses at the center of the frame. Once
focus has been acquired, the focus indicator will glow
green.
Focus indicator
When the shutter-release button is pressed halfway, the
shutter speed and aperture value are also displayed.
Focus and exposure remain locked while the shutter-release button is pressed halfway.
When the camera detects subject movement or camera shake and increases shutter
If the focus area or the focus indicator blinks red when the shutter-release button is
pressed halfway, the camera is unable to focus. Modify the composition and press the
shutter-release button halfway again.
2
Press the shutter-release button the rest of
the way down.
The shutter is released and the picture will be recorded to
the memory card or internal memory.
30
Step 3 Focus and Shoot
B During Recording
While pictures are being recorded, the number of exposures remaining will blink. Do not open the
battery-chamber/memory card slot cover while pictures are being recorded. Cutting power or
removing the memory card in these circumstances could result in loss of data or in damage to the
camera or card.
B Autofocus
Autofocus may not perform as expected in the following situations. In some rare cases, the subject
may not be in focus despite the fact that the focus area or the focus indicator glows green.
• Subject is very dark
• Objects of sharply differing brightness are included in the scene (e.g. the sun behind the subject
makes that subject appear very dark)
• No contrast between the subject and surroundings (e.g. a portrait subject, wearing a white shirt, is
standing in front of a white wall)
• Several objects are at different distances from the camera (e.g. the subject is inside a cage)
• Regular geometric patterns (e.g. window blind or windows in a skyscraper)
• Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus several
alternate subject is at the same distance from the camera as the intended subject while the shutter-
release button is pressed halfway.
B Note on Face Detection
C Touch Shutter
At the default setting, the shutter can be released by simply tapping a subject in the monitor
the Touch AF/AE option, which allows the camera to set the focus and exposure on the subject
that is tapped on the monitor. When using the Touch AF/AE option, the picture is taken by pressing
C Blink Warning Screen
When a picture is taken with the face detection function and the camera detects that a portrait
displayed in the monitor.
D AF-assist Illuminator and Flash
all the way down.
31
Step 4 Playing Back and Deleting Pictures
Playing Back Pictures (Playback Mode)
Press the c (playback) button.
b (movie-record) button
15/11/2010 15:30
0004. JPG
4
4
A (shooting mode) button
The last picture taken will be displayed in full-frame playback mode.
Drag the current picture left or right to display the previous or subsequent picture.
c (playback) button Internal memory indicator
Display the previous picture
Display the subsequent picture
15/11/2010 15:30
0004. JPG
15/11/2010 15:30
0004. JPG
4
4
Pictures may be displayed briefly at low resolution while being read from the memory card or
internal memory.
Press the A button, b (movie-record) button, or shutter-release button to switch to
shooting mode.
When playing back pictures stored in the camera’s internal memory,
C
is displayed. When a memory card
is inserted in the camera, is not displayed and images stored on the memory card are played back.
C
C Operations Available in Playback Mode
C Pressing the c Button to Turn On the Camera
When the camera is off, holding down the c button will turn the camera on in playback mode.
C Viewing Pictures
following buttons:
- The power switch, shutter-release button, or c button
32
Step 4 Playing Back and Deleting Pictures
Deleting Unwanted Pictures
1
Play back a picture to be deleted, tap the
bottom tab to display the setting controls
2
Tap the desired delete option.
Current image: Delete the currently displayed full-frame
Erase selected images: Select multiple pictures and
delete them. See “Operating the Erase Selected Images
Screen” for more information.
Delete
Current image
Erase selected images
All images
All images: Delete all pictures.
Select either Erase selected images or All images when performing step 1 in
3
Tap Yes on the delete confirmation dialog.
Delete
Deleted pictures cannot be recovered.
Erase 1 image?
To exit without deleting the picture, tap J or No.
Yes
No
Operating the Erase Selected Images Screen
1
Tap a picture to display y.
Erase selected images
To deselect the picture, tap the picture again and y will
be hidden.
Tap n or rotate the zoom control to g (i) to display the
picture in full-frame playback mode and tap o or rotate
the zoom control to f (h) to display pictures in
thumbnail playback mode.
2
Display y to all pictures to delete and tap I to apply the selection.
The confirmation screen is displayed. Follow the onscreen instructions for more
operations.
B Notes on Deletion
• Once deleted, pictures cannot be recovered. Transfer important pictures to a computer before
deleting them.
33
Using the Basic Shooting Functions
In G (easy auto) mode, following settings can be made. Each icon indicates the
current setting.
1
2
3
4
OFF
0.0
Touch shooting
5
1
2 3 4 5 6
6
m Flash Mode
Flash mode can be selected to suit the shooting conditions.
• When ISO sensitivity is set to Auto, the flash has a range of 0.3-3.5 m (1 ft.-
11 ft.) at the maximum wide-angle zoom position and a range of 0.5-2.5 m (1 ft.
8 in.-8 ft. 2 in.) at the maximum telephoto zoom position.
Off are available. When a Auto is selected, the camera sets the flash mode
according to the automatically selected scene mode.
Auto
a
b
c
X
Flash fires automatically when lighting is poor.
Auto with red-eye reduction
Off
Flash will not fire even when lighting is poor.
Fill flash
Flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and
backlit subjects.
Slow sync
d
a (auto) is combined with slow shutter speed.
Suited to evening and night portraits that include background scenery.
Flash illuminates main subject; slow shutter speeds are used to capture
background at night or under dim lighting.
34
Using the Basic Shooting Functions
Setting the Flash Mode
1
Tap the left tab to display the setting controls
2
Tap the desired flash mode icon.
Flash mode
Auto
Tap J to return to the previous screen.
To hide the setting controls after applying the setting, tap
the tab again.
B Shooting When the Flash is Disabled (c) or Lighting is Dim
• The noise reduction function may be activated with some shooting conditions such as dim
lighting. More time than usual is required to record pictures to which noise reduction is applied.
B Note on Using the Flash
When using the flash, reflections from dust particles in the air may appear as bright spots in pictures.
To reduce these reflections, set the flash to c (off).
C The Flash Lamp
The flash lamp indicates flash status when the shutter-
release button is pressed halfway.
• On: Flash will fire when picture is taken.
• Blinks: Flash charging. Wait a few seconds and try
again.
• Off: Flash will not fire when picture is taken.
If the battery is low, the monitor display will turn off,
and remain off, until the flash is fully charged.
35
Using the Basic Shooting Functions
C The Flash Mode Setting
The default flash mode setting varies with shooting mode.
• G (easy auto) mode: a (auto)
• A (auto) mode: a (auto)
• F (smart portrait): fixed at a (auto) when Off is selected for Blink proof; c (off) when On is
There are functions with which the flash cannot be enabled. See “Camera Settings that Cannot Be
The flash mode setting applied in A (auto) mode is stored in the camera’s memory even after the
camera is turned off.
C Red-eye Reduction
This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”).
To reduce red-eye, a series of low-intensity pre-flashes fire before the main flash. In addition, if the
camera detects red-eye when a picture is taken, the affected area is processed to reduce red-eye
before the picture is saved.
Note the following when shooting:
• Due to the pre-flashes, there is a longer than usual interval between the time the shutter-release
button is pressed and the time the shutter is released.
• More time than usual is required to record pictures.
• Red-eye reduction may not produce the desired results in some situations.
• In extremely rare instances, areas not subject to red-eye may be affected by red-eye reduction
processing; in these cases, choose another flash mode and try again.
36
Using the Basic Shooting Functions
n Taking Pictures with the Self-timer
The camera is equipped with a ten-second and two-second timer for self-portraits.
This feature is useful for reducing the effects of camera shake that occurs when
pressing the shutter-release button. When using the self-timer, use of a tripod is
1
Tap the bottom tab to display the setting
OFF
0.0
2
Tap 10s or 2s.
Self-timer
Off
10s (ten seconds): Use on important occasions, such as
weddings
2s (two seconds): Use to prevent camera shake
The mode selected for self-timer is displayed.
Tap J to return to the previous screen.
To hide the setting controls after applying the setting, tap the tab again.
3
Frame the picture and press the
shutter-release button halfway.
10S
Focus and exposure will be set.
1/250 F3.9
37
Using the Basic Shooting Functions
4
Press the shutter-release button the
rest of the way down.
9S
The self-timer starts, and the number of
seconds remaining before the shutter is
released is displayed in the monitor. The self-
timer lamp blinks while the timer is counting
down. About one second before the shutter is
released, the lamp stops blinking and glows
steadily.
When the shutter is released, the self-timer will
be set to Off.
To stop the timer before a picture is taken, press
the shutter-release button again.
B Note on Self-timer
There are functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be
38
Using the Basic Shooting Functions
A Image Mode (Image Quality/Image Size)
Image mode refers to the combination of image size and image quality
(compression) at which pictures are recorded. Choose the image mode best
suited to the manner in which pictures will be used and the capacity of the
internal memory or memory card. The higher the image mode setting, the larger
the size at which it can be printed or displayed without appearing noticeably
“grainy,” but limiting the number of pictures that can be recorded.
Option
Size (pixels)
Description
Higher quality than R suitable for enlargements or
high-quality prints. The compression ratio is
approximately 1:4.
Q 4320×3240P 4320 × 3240
R 4320×3240
4320 × 3240
(default setting)
Best choice in most situations. The compression ratio is
approximately 1:8.
R 3264×2448
3264 × 2448
2592 × 1944
L 2592×1944
Smaller size than R, R, or L allows more pictures to
be stored. The compression ratio is approximately 1:8.
M 2048×1536
2048 × 1536
1024 × 768
Suited to display on a computer monitor. The
compression ratio is approximately 1:8.
N 1024×768
Suited to full-screen display on a television with an
aspect ratio of 4:3, or distribution by e-mail. The
compression ratio is approximately 1:8.
O 640×480
640 × 480
Pictures with an aspect ratio of 16:9 are recorded. The
compression ratio is approximately 1:8.
p 3968×2232
3968 × 2232
1
Tap the bottom tab to display the setting
icon.
OFF
0.0
2
Tap the desired image mode icon.
Image mode
4320×3240
Tap J to return to the previous screen.
To hide the setting controls after applying the setting, tap
the tab again.
39
Using the Basic Shooting Functions
C Image Mode
• The setting can also be changed in shooting modes other than G (easy auto) mode.
• Change made to this setting applies to all shooting modes.
C Number of Exposures Remaining
The following table lists the approximate number of pictures that can be stored in internal memory
and on a 4 GB memory card. Note that the number of pictures that can be stored will differ
depending on the composition of the picture (due to JPEG compression). In addition, this number
may vary depending on the make of memory card, even when the memory cards have the same
specified capacity.
Internal memory
(approx. 79 MB)
Memory card
*
Setting
Print size (cm/in.)
(4 GB)
Q 4320×3240P
R 4320×3240
R 3264×2448
L 2592×1944
M 2048×1536
N 1024×768
O 640×480
11
550
36 × 27/14 × 10.5
36 × 27/14 × 10.5
28 × 21/11 × 8
22 × 16/8.5 × 6.5
17 × 13/7 × 5
23
40
1100
1910
62
2940
97
4640
316
563
36
15000
24100
1720
9 × 7/3.5 × 2.5
5 × 4/2 × 1.5
p 3968×2232
34 × 19/13 × 7.5
* Print size at an output resolution of 300 dpi. Print sizes are calculated by dividing the number of
pixels by printer resolution (dpi) and multiplying by 2.54 cm (1 in.). However, at the same image
size, pictures printed at higher resolutions will print smaller than the size indicated, and those
printed at lower resolutions will print larger than the size indicated.
• The number of exposures remaining is displayed on the shooting screen when 50 or fewer remain
• If there are 10,000 or more pictures saved in the camera, “9999” is displayed on the playback screen
as the current frame number or total number of frames.
40
Using the Basic Shooting Functions
q Tapping the Monitor to Release the Shutter (Touch
Shutter)
Pictures can be taken by simply tapping the monitor.
•
Touch shutter is set by default. Proceed to step 3.
1
Tap the bottom tab to display the setting
icon.
OFF
0.0
2
3
Tap q (touch shutter).
Tap J to return to the previous screen.
Touch shooting
Touch shutter
To hide the setting controls after applying the setting, tap
the tab again.
Tap the desired subject to take a picture.
When a face is detected in G (easy auto) mode, it is
framed by a border. Tap a detected face to set the focus
and exposure on that face.
When no face is detected, the camera focuses on the area
that is tapped.
23
Do not use force when tapping the monitor as this may
cause slight movement of the camera, resulting in
blurred pictures.
When digital zoom is in effect, the camera focuses on the subject in the center of the
frame.
The shutter-release button can also be used when the touch shutter option is selected.
If X is displayed when the monitor is tapped, the
shutter cannot be released. Tap an area within X or a
border displayed when the camera detects a face.
23
41
Using the Basic Shooting Functions
B Notes on Touch Shutter
one picture can be taken at a time using the touch shutter function.
• Prevent shooting with accidental tapping of the monitor in G (easy auto) mode, A (auto) mode
setting, the shutter is not released when the monitor is tapped.
• When shooting subjects with which autofocus may not perform as expected, the subject may not
camera locks focus and releases the shutter after ten or two seconds.
42
Using the Basic Shooting Functions
C Shooting Modes That Support Touch Shutter
The touch shutter can be used in G (easy auto) mode and other shooting modes. Touch shutter
operation differs according to the current shooting mode as follows.
Shooting mode
Touch shutter operation
•
•
When a face is detected by the camera, it is framed by a
border. Tap a detected face to set the focus and exposure
on that face.
When no face is detected, the camera focuses at the area
tapped.
Sports, Party/indoor,
Tap the intended subject. Focus and exposure are set for the
Beach, Snow, Close-up, Food, area tapped. When the camera detects more than one face,
Museum, Copy, and
Backlighting scene modes
tap a face framed by a single border to set focus and exposure
for that face.
Only a border displayed by the face detection function can be
selected. When the camera detects more than one face, tap a
face framed by a single border to set focus and exposure for
that face.
Portrait and Night portrait
Landscape, Sunset,
Focus and exposure are set for the same focus area used
when pictures are taken by pressing the shutter-release
Dusk/dawn, Night landscape,
Fireworks show, and
Panorama assist scene modes
Touch shutter cannot be enabled.
C Touch Shooting Setting
The touch shooting setting applied in A (auto) mode is stored in the camera’s memory even after
the camera is turned off.
43
Using the Basic Shooting Functions
r Tapping the Monitor to Focus (Touch AF/AE)
The touch shooting setting can be changed from Touch shutter (default setting)
to Touch AF/AE.
Tap a subject in the monitor to select the area at which the camera focuses. Press
the shutter-release button halfway to lock focus and exposure for the area tapped,
and press the shutter-release button the rest of the way down to take the picture.
1
2
3
Tap the bottom tab to display the setting
icon.
OFF
0.0
Tap r (touch AF/AE).
Tap J to return to the previous screen.
Touch shooting
Touch AF/AE
To hide the setting controls after applying the setting, tap
the tab again.
Tap the subject at which the camera focuses.
When a face is detected in G (easy auto) mode, faces
other than the one surrounded by the frame cannot be
tapped. When multiple faces are detected, tap a face
framed by a single border to move the focus area to that
face.
23
When no face is detected, the camera focuses on the area
that is tapped.
u or a double border will be displayed at the area tapped.
When digital zoom is applied, the focus area cannot be selected.
To cancel the focus area selection, tap a displayed at left in the monitor.
If a position at which focus cannot be acquired is tapped,
X will be displayed in the monitor. Tap another
position inside X.
23
44
Using the Basic Shooting Functions
4
Press the shutter-release button to take a
picture.
Press the shutter-release button halfway to acquire focus
and exposure and press it all the way down to release the
shutter.
B Note on Touch AF/AE
When shooting subjects with which autofocus may not perform as expected, the subject may not
C Shooting Modes That Enable Touch AF/AE Function
Touch AF/AE can be used in G (easy auto) mode and other shooting modes. Touch AF/AE
operation differs according to the current shooting mode as follows.
Shooting mode
Touch AF/AE operation
•
•
When the camera detects a face, only a face framed by a
border can be selected. When the camera detects more
than one face, tap a face framed by a single border to move
the focus area to that face.
When no face is detected, the camera focuses at the area
tapped.
Sports, Party/indoor, Beach,
Snow, Close-up, Food,
Museum, Copy, and
Backlighting scene modes
Focus and exposure are set for the area tapped.
Only a border displayed by the face detection function can be
selected. When the camera detects more than one face, tap a
face framed by a single border to move the focus area to that
face.
Portrait and Night portrait
Landscape, Sunset,
Dusk/dawn, Night landscape,
Fireworks show, and
Panorama assist scene modes
Touch AF/AE cannot be enabled.
45
Using the Basic Shooting Functions
C Touch Shooting Setting
The touch shooting setting applied in A (auto) mode is stored in the camera’s memory even after
the camera is turned off.
D Taking Pictures of Subjects with Which Autofocus may not Perform as
Expected
pressing the shutter-release button halfway to refocus several times, or try the following techniques.
1
2
3
for the touch shooting setting.
Touch shooting
Touch AF/AE
Tap another subject that is as far from the camera as the
desired subject.
23
Press the shutter-release button halfway.
• The camera focuses on the subject and the focus area
glows green.
• Exposure is locked for the subject on which focus is
acquired when the shutter-release button is pressed
halfway.
1/250 F3.9
4
5
Continue holding down the shutter-release button halfway
and recompose the picture.
• Be sure to maintain the same distance between the
camera and the subject while the shutter-release button
is pressed halfway.
1/250 F3.9
Press the shutter-release button the rest of the way down to
take the picture.
46
Using the Basic Shooting Functions
o Changing the Brightness Using Exposure Compensation
Exposure compensation is used to alter exposure from the value suggested by the
camera to make pictures brighter or darker.
1
Tap the bottom tab to display the setting
compensation icon.
OFF
0.0
2
Drag the slider to change the exposure
compensation value.
Exposure compensation
To make the picture brighter, apply positive (+) exposure
compensation.
-
2
-
1
+
1
+
2
0
To make the picture darker, apply negative (–) exposure
compensation.
Tap J to return to the previous screen.
3
Tap I.
Exposure compensation
To hide the setting controls after applying the setting, tap
the tab again.
To exit without setting the exposure compensation, set
the value to 0 and tap I.
-
2
-
1
+
1
+
2
0
C Exposure Compensation Value
The exposure compensation value applied in A (auto) mode is stored in the camera’s memory even
after the camera is turned off, and reapplied the next time A (auto) mode is selected.
47
Taking Pictures with the Remote Control
taking self-portraits and effectively eliminates blur caused by camera shake that
occurs when the shutter-release button is pressed.
• The remote control can also be used in conjunction with the self-timer.
• Use of a tripod is recommended during shooting with the remote control. Set
a tripod to stabilize the camera during shooting.
1
2
Use a tripod or other means of stabilizing the camera.
Frame a picture.
Press the g or f button to activate the zoom. Press the g button to
zoom in so that the subject fills a larger area of the frame, or the f
button to zoom out, thus increasing the area visible in the frame.
camera detects human faces, remote control operation is not available.
3
Point the infrared emitter of the remote
control at the infrared receiver on the
press the apply selection button.
Rear
Front
The shutter is released and a picture is saved.
Point the remote control at the infrared receiver
from a distance not greater than 5 m (16 ft.).
When the self-timer is used, focus is locked,
exposure is adjusted, and the self-timer begins
counting down. Once the shutter is released, the
self-timer is automatically disabled. To stop the
self-timer before a picture is taken, press the apply
selection button again.
Apply selection
button
48
More on Shooting
Selecting a Shooting Mode
Following shooting modes can be selected.
G
Easy auto mode
By simply framing a picture, the camera automatically selects the optimum shooting
mode.
A
Auto mode
Pictures can be taken with the flash mode or macro mode settings. Other settings can
be made, such as the continuous setting or the “subject tracking” option, which moves
the active focus area to track the registered subject.
C
Scene mode
Camera settings are automatically optimized for the selected scene.
F
Smart portrait mode
The camera uses the face detection function to detect human faces, and automatically
releases the shutter when a smile is detected. The skin softening option can be used to
make skin tones of human faces displayed smoothly.
1
Press the A button in shooting
mode.
The shooting-mode selection menu is
displayed.
2
Tap the desired shooting mode icon.
Shooting mode
Easy auto mode
The camera enters the selected shooting mode.
To select a scene mode, first tap C (scene), and then tap
To return to the current shooting mode without switching
shooting modes, press the A button or the shutter-
release button.
49
G Easy Auto Mode
Automatic Scene Selection
The camera automatically selects one of the following scenes when pointing the
camera at a subject.
• G Auto mode (general use)
Focusing in Easy Auto Mode
When G or i is displayed, the camera automatically
selects one or more of the nine focus areas containing
the subject closest to the camera. Press the shutter-
release button halfway to activate the focus area. When
the shutter-release button is pressed halfway, the focus
area (up to nine areas) selected by the camera will be
displayed in the monitor.
23
Face Detection
When the camera is pointed at a human face, face detection, which the camera
automatically detects that face and focus on it, starts. The face detection function
is activated in the following situations.
B Notes on the Face Detection Function
• The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or other obstructions
- When faces take up too much or too little of the frame
• When the frame includes more than one face, the faces detected by the camera and the face on
which the camera focuses depend upon a variety of factors, including the direction in which the
faces are looking.
expected, and the subject may not be in focus despite the fact that the double border glows
green. Should this occur, refocus on another subject positioned at the same distance from the
50
G Easy Auto Mode
C Motion Detection
In G (easy auto) mode or A (auto) mode, when the camera detects subject movement or camera
shake, ISO sensitivity and shutter speed are increased to reduce blurring. In this case, the shutter
speed indicator will turn green.
• Motion detection may be unable to completely eliminate the effects of subject movement and
camera shake in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The pictures taken using motion detection may be somewhat “grainy” in appearance.
51
Shooting in A (Auto) Mode
Shooting settings such as flash mode or macro mode can be made. The
Continuous setting or the Subject tracking option, with which the active focus
area moves to track the selected subject, can also be made or applied.
1
Tap A in shooting mode.
Shooting mode menu is displayed.
2
Tap A.
The camera enters A (auto) mode.
Shooting mode
Auto mode
3
4
Tap the left or bottom tab to display the
the setting.
Tap the desired setting control to adjust the setting.
more information.
23
Frame the subject and take a picture.
When the camera detects a face, a yellow
double border (focus area) is displayed around
that face. When the shutter-release button is
pressed halfway, the camera focuses on that
23
When taking pictures of subjects other than
people, or framing a subject with which no
face is detected, the camera automatically selects one or more of the nine focus areas
area (up to nine areas) turns green.
A picture is taken when the shutter-release button is pressed all the way down.
At the default setting, the shutter can be released by simply tapping a subject in the
monitor (
can be changed to the Touch AF/AE option, which allows the camera to set the focus
and exposure on the subject that is tapped on the monitor. When using the Touch AF/AE
option, the picture is taken by pressing the shutter-release button (
44).
D More Information
52
Adjusting the A (Auto) Mode setting
In A (auto) mode, the camera settings indicated below can be adjusted by
tapping the tabs to display the setting controls.
• Each icon also indicates the current setting.
• Tap the icon of the desired item to display the setting screen for that item.
• Tap the tab again to hide the setting controls.
1
2
23
3
4
5
6
7
OFF
AUTO
AUTO
0.0
23
10 9
8
.
1
2
3
4
5
m
Movie options* ................................. 125
Touch shooting*
q
p
n
A
D
6
Touch AF/AE .....................................44
r
s
7
8
Exposure compensation*..............47
o
9
10
* The settings applied in A (auto) mode are stored in the camera’s memory even after the
camera is turned off, and reapplied the next time A (auto) mode is selected.
C Camera Settings that Cannot Be Applied Simultaneously
Some shooting settings cannot be used with other functions. See “Camera Settings that Cannot Be
53
Adjusting the A (Auto) Mode setting
p Macro Mode
A (auto) M Tap the left tab M p Macro mode
Macro mode is used for taking pictures of objects as close as 3 cm (1.2 in.). Note
that the flash may be unable to light the entire subject at distances of less than
30 cm (1 ft.).
1
Tap o.
Macro mode
On
ON
OFF
2
Rotate the zoom control to frame the picture.
The closest possible shooting distance may vary
according to the zoom position. The camera can focus at
distance of 3 cm (1.2 in.) at the zoom position at which F
and the zoom indicator glow green (the zoom indicator is
positioned to the left of K).
B Note on Macro Mode Setting
There are functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be
C Autofocus
When taking still pictures in macro mode, the camera continuously adjusts the focus until the
shutter-release button is pressed halfway to lock the focus. Therefore, the sound of lens drive
movement can be heard.
C The Macro Mode Setting
• In G (easy auto) mode, the camera enters macro mode when i is selected.
macro mode when k Close-up or u Food is selected.
• In F smart portrait mode, macro mode is disabled.
54
Adjusting the A (Auto) Mode setting
s Subject Tracking (Focusing on a Moving Subject)
A (auto) M Tap the bottom tab M Touch shooting
Touch shutter (default setting) to Subject tracking. Use this option to take
pictures of moving subjects. Tap the subject on which the camera will focus. The
focus area will automatically move to track the subject.
1
Tap s (Subject tracking).
s (subject tracking) is enabled only in A (auto) mode.
Touch shooting
Subject tracking
2
Register a subject.
Tap the desired tracking subject in the monitor.
-
-
The subject is registered.
When the border framing the subject glows red, the
camera is unable to focus. Change the composition
and try again.
23
If the tapped area does not contain a subject that can be registered, X is displayed in
the monitor. Tap a subject within X.
When the subject is registered, a yellow focus area is
displayed around that subject and the camera begins
tracking the subject.
Tap another subject to change a subject to follow.
To cancel the registration of the subject, tap a,
displayed at left in the monitor.
23
If the camera cannot track the registered subject
anymore, the focus area will disappear and the registration will be canceled. Register the
subject again.
55
Adjusting the A (Auto) Mode setting
3
Press the shutter-release button to take a
picture.
The camera focuses on the focus area when the shutter-
release button is pressed halfway. The focus area will
glow green and focus will be locked.
1/ 250 F3.9
When the camera is unable to focus, the focus area will
blink. Press the shutter-release button halfway again to
focus.
If the shutter-release button is pressed halfway while the focus area is not displayed, the
camera automatically selects one or more of the nine focus areas containing the subject
Press the shutter-release button all the way down to release the shutter.
B Notes on Subject Tracking Mode
• Digital zoom is not available.
• The sound of the lens focus motor can be heard when the subject tracking function is working.
settings are adjusted after the subject has been registered, subject registration will be canceled.
• It may be impossible to register the desired subject, or the camera may be unable to track the
registered subject or may begin tracking a different subject, if the subject is moving rapidly, if
there is a significant amount of camera shake, or if the camera detects a similar subject. The
camera’s ability to accurately track the registered subject is also dependent upon the size and
brightness of the subject.
out of focus despite the fact that the focus area glows green. In this situation, focus on another
subject which is at the same distance from the camera as the intended subject while the shutter-
C Touch Shooting Setting
Subject registration with subject tracking will be canceled when the camera is turned off.
56
Adjusting the A (Auto) Mode setting
E ISO Sensitivity
A (auto) M Tap the bottom tab M E ISO sensitivity
The higher the sensitivity, the less light is needed to expose an image, allowing
capturing darker subjects.
Also, a higher sensitivity allows higher shutter speeds, resulting in the picture with
less camera shake and subject blur in comparison to the same subject taken under
the same brightness.
• Although high ISO sensitivity settings are suited to pictures of subjects taken
under dim lighting, those taken without flash, or those taken at telephoto
setting, high sensitivity settings are often associated with “noise”- randomly
spaced, brightly colored pixels- concentrated in dark portions of images.
s
Auto (default setting)
Sensitivity is ISO 80 under normal conditions; when lighting is poor, the camera
compensates by raising sensitivity to a maximum of ISO 800.
Fixed range auto
Choose the range in which the camera automatically adjusts ISO sensitivity, from
ISO 80-200 or ISO 80-400. The camera will not increase sensitivity beyond the
maximum value in the selected range. Set the maximum value for ISO sensitivity for
effective control over the amount of “grain” that appears in images.
80, 100, 200, 400, 800, 1600, 3200, 6400
Sensitivity is locked at the specified value.
B Notes on ISO Sensitivity
disabled.
B Notes on ISO Sensitivity 3200 and 6400
• When ISO sensitivity is set to 3200 or 6400, Image mode settings are limited to M
2048×1536, N 1024×768, and O 640×480.
• When ISO sensitivity is set to 3200 or 6400, the image mode icon is displayed in red during
shooting.
57
Adjusting the A (Auto) Mode setting
C Continuous
A (auto) M Tap the bottom tab M C Continuous
Enable continuous shooting or BSS (best shot selector).
U
Single (default setting)
One picture is taken each time the shutter-release button is pressed.
V
Continuous
While the shutter-release button is held down, up to 4 pictures are taken at a rate of
about 0.9 frames per second (at an Image mode setting of R 4320×3240).
D
W
BSS (Best Shot Selector)
The “best shot selector” is recommended when shooting with the flash off or the
camera zoomed in, or in other situations in which inadvertent motion can result in
blurred pictures. When BSS is on, the camera takes up to ten pictures while the
shutter-release button is held down. The sharpest picture in the series is
automatically selected and saved.
Multi-shot 16
Each time the shutter-release button is pressed, the camera
takes 16 shots at a rate of about 7 fps and arranges them in a
single image.
Pictures are recorded at an image mode setting of L (image
size: 2560 × 1920 pixels). This setting cannot be changed.
Digital zoom is not available.
B Notes on Continuous Shooting
• When Continuous, BSS, or Multi-shot 16 is selected, the flash is disabled. Focus, exposure, and
white balance are fixed at the values determined with the first picture in each series.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
B Note on BSS
BSS is effective when taking pictures of still subjects. BSS may not produce the desired results if the
subject moves or the composition changes while the shutter-release button is held down.
B Note on Multi-shot 16
with images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when
shooting with Multi-shot 16 enabled is recommended.
58
Adjusting the A (Auto) Mode setting
w White Balance (Adjusting Hue)
A (auto) M Tap the bottom tab M w White balance
The color of light reflected from an object varies with the color of the light source.
The human brain is able to adapt to changes in the color of the light source, with
the result that white objects appear white whether seen in the shade, direct
sunlight, or under incandescent lighting. Digital cameras can mimic this
adjustment by processing images according to the color of the light source. This is
known as “white balance.” For natural colors, choose a white balance setting that
matches the light source before shooting. Although the default setting, Auto, can
be used under most types of lighting, the white balance setting suited to a
particular light source can be specified manually to achieve more accurate results.
s
Auto (default setting)
White balance automatically adjusted to suit lighting conditions. Best choice in
most situations.
b
Preset manual
Neutral-colored object used as reference to set white balance under unusual
c
d
e
f
g
Daylight
White balance adjusted for direct sunlight.
Incandescent
Use under incandescent lighting.
Fluorescent
Use under fluorescent lighting.
Cloudy
Use when taking pictures under overcast skies.
Flash
Use with the flash.
B Note on White Balance
59
Adjusting the A (Auto) Mode setting
Preset Manual
Preset manual is effective with mixed lighting or to compensate for light sources
with a strong color cast (for example, to make pictures taken under a lamp with a
red shade look as though they had been taken under white light).
Follow the procedure below to measure the white balance value according to the
light source when shooting.
1
2
Place a white or gray reference object under the lighting that will be
used during shooting.
Tap the bottom tab to display the setting
OFF
AUTO
AUTO
0.0
3
4
Tap b.
White balance
Preset manual
The camera zooms in to the position for measuring white
balance.
Frame the reference object in the measuring
window.
Preset manual
To apply the most recently measured value for preset
manual, tap Cancel.
Cancel
Measure
Measuring window
5
Tap Measure to measure a value for preset
manual.
Preset manual
The shutter is released and the new white balance value is
set. No picture is recorded.
Cancel
Measure
B Note on Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.
60
Shooting Suited to Scenes (Scene Mode)
Camera settings are automatically optimized for the selected subject type. The
following scene modes are available.
b Portrait
c Landscape
d Sports
h Sunset
l Museum
e Night portrait f Party/indoor
i Dusk/dawn
m Fireworks show n Copy
Z Beach
z Snow
j
Night landscape
k Close-up
o Backlighting
u
Food
p
Panorama assist
Selecting a Scene Mode
1
2
3
Press the A button in shooting
mode to display the shooting-mode
selection menu and tap C.
Shooting mode
Scene
The scene mode selection screen is
displayed.
Tap the desired scene icon.
Beach
The display changes to that for the selected scene mode.
For more information about features of scene modes, see
Frame the subject and take a
picture.
The degree of effects can be adjusted with
depending on the scene mode.
1/ 250 F3.9
C Displaying the Description of Each Scene Mode
When u is tapped in the scene selection screen (step 2), the help
selection screen is displayed. Tap a scene icon to display a
description of the features of that mode. Tap J to return to the
help selection screen.
Help selection
• Tap J in the help selection screen to return to the monitor
display shown in step 2.
61
Shooting Suited to Scenes (Scene Mode)
C Shooting Settings in Scene Mode
The shooting settings for each scene mode are shown below.
Touch
shooting
1, 4
Exposure
compensation
Flash mode
Macro mode
Self-timer
1
1
1
b
c
d
e
f
Z
z
h
i
j
k
u
b
Off
q
0
Off
5
1
1
c
Off
Off
Off
Off
Off
Off
Off
Off
Off
On
On
Off
Off
Off
Off
Off
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
0
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
1
1
c
0
2
1, 4
1
1
1
1
1
1
1
1
1
1
1
1
b
0
1, 3
1
b
0
1
1
1
a
a
0
1
1
1
0
1
5
1
c
c
c
a
c
c
c
0
5
1
0
5
1
0
1
1
1
0
1
1
0
1
1
1
1
1
l
m
n
o
p
0
5
0
1
1
1
1
1
1
c
X
0
1
1
0
1
5
1
c
0
1
2
3
4
5
The default setting can be changed by tapping the tabs to display the setting controls.
The flash mode setting is fixed at fill flash with slow sync with red-eye reduction.
The setting may change to slow sync with red-eye reduction.
Only a frame displayed by the face detection function can be selected.
Focus and exposure are set for the same focus area used when pictures are taken by
pressing the shutter-release button.
C Image Mode (Image Quality/Image Size) Setting
the image mode setting in scene mode, tap the bottom tab to display the setting controls and tap
A.
62
Shooting Suited to Scenes (Scene Mode)
Adjusting Scene Effect
The scene effect adjustment slider is displayed in the
scene modes listed below. Tap or drag the scene effect
adjustment slider to adjust the degree of effect to be
applied to pictures taken in the selected scene mode.
23
Scene effect
adjustment slider
Brighter
b Portrait, e Night portrait,
Z Beach, z Snow,
j Night landscape, o Backlighting
Darker
More red
u Food
More blue
More vivid
c Landscape, k Close-up
Less vivid
More red
h Sunset, i Dusk/dawn
More blue
63
Shooting Suited to Scenes (Scene Mode)
Selecting a Scene Mode to Take Pictures (Features)
b Portrait
Use this mode for portraits.
•
When the camera detects a human face, that face will be
framed by a yellow double border (focus area). See “Face
•
If more than one face is detected, the face nearest to the
camera will be framed by a yellow double border (focus
area) and the other faces will be framed by a single border.
Tap the face framed by a single border to change the focus
•
•
The camera softens skin tones (in up to three faces) by applying the skin softening
If no faces are detected when the shutter-release button is pressed halfway, the camera
focuses on the subject at the center of the frame.
•
•
•
Digital zoom is not available.
The default setting for flash mode is b Auto with red-eye reduction.
c Landscape
Use this mode for vivid landscapes and cityscapes.
•
Camera focuses at infinity. The focus area or focus indicator
button is pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
•
•
•
The flash does not fire and the flash mode is disabled.
Use of a tripod is recommended in scene modes with which O is indicated. Set Vibration
64
Shooting Suited to Scenes (Scene Mode)
d Sports
Use this mode for dynamic action shots that freeze the action
in a single shot and record motion in a series of pictures.
•
The camera focuses on the subject at the center of the
frame. The area focused can be changed by the touch
continuously adjust the focus until the shutter-release
button is pressed halfway to lock the focus.
•
•
•
•
While the shutter-release button is held down, up to 4 pictures are taken at a rate of
about 0.9 frames per second (fps) when image mode is set to R 4320×3240.
Focus, exposure, and white balance are fixed at the values determined with the first
picture in each series.
The maximum frame rate with continuous shooting may vary depending upon the
current image mode setting, the memory card used, or shooting condition.
Continuous shooting is disabled and only one picture can be taken at a time when the
The flash does not fire and the flash mode is disabled.
•
•
e Night portrait
O
Use this mode for portraits taken at sunset or at night. The flash
fires to light the portrait subject while preserving background
lighting to achieve a natural balance between the main subject
and background ambience.
•
When the camera detects a human face, that face will be
framed by a yellow double border (focus area). See “Face
•
If more than one face is detected, the face nearest to the camera will be framed by a
yellow double border (focus area) and the other faces by a single border. Tap the face
The camera softens skin tones (in up to three faces) by applying the skin softening
If no faces are detected when the shutter-release button is pressed halfway, the camera
focuses on the subject at the center of the frame.
•
•
•
•
•
Digital zoom is not available.
The flash mode setting is fixed at fill flash with slow sync with red-eye reduction.
65
Shooting Suited to Scenes (Scene Mode)
f Party/indoor
Captures the effects of candlelight and other indoor
background lighting.
•
Camera focuses on the subject at the center of the frame. The
•
The default setting for flash mode is b Auto with red-eye
reduction. The flash mode setting may automatically switch
to slow sync with red-eye reduction.
•
•
As pictures are easily affected by camera shake, hold the camera steadily. Use of a tripod is
recommended in dark surroundings.
Z Beach
Captures the brightness of such subjects as beaches or sunlit
expanses of water.
•
Camera focuses on the subject at the center of the frame.
The area focused can be changed by the touch shutter
•
picture brightness.
z Snow
Captures the brightness of such subjects as snowfield.
•
Camera focuses on the subject at the center of the frame.
The area focused can be changed by the touch shutter
•
picture brightness.
h Sunset
O
Preserves the deep hues seen in sunsets and sunrises.
•
•
•
Camera focuses on the subject at the center of the frame.
The default setting for flash mode is c Off.
picture color.
Use of a tripod is recommended in scene modes with which O is indicated. Set Vibration
66
Shooting Suited to Scenes (Scene Mode)
i Dusk/dawn
O
Preserves the colors seen in the weak natural light before
sunrise or after sunset.
•
Camera focuses at infinity. The focus area or focus indicator
button is pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
•
•
•
The flash does not fire and the flash mode is disabled.
j Night landscape
O
Slow shutter speeds are used to produce stunning night
landscapes.
•
Camera focuses at infinity. The focus area or focus indicator
button is pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
•
•
•
The flash does not fire and the flash mode is disabled.
k Close-up
Photograph flowers, insects and other small objects at close
range.
•
automatically zooms to the closest position at which it can
focus.
•
The closest possible shooting distance may vary according
to the zoom position. The camera can focus at distance of
3 cm (1.2 in.) at the zoom position at which F and the zoom
indicator glow green (the zoom indicator is positioned to
the left of K).
•
•
•
•
•
Note that the flash may be unable to light entire subject at distances of less than 30 cm
(1 ft.).
Camera focuses on the subject at the center of the frame. The area focused can be
The camera focuses continuously until focus is locked by pressing the shutter-release
button halfway.
As pictures are easily affected by camera shake, be sure that Vibration reduction
67
Shooting Suited to Scenes (Scene Mode)
u Food
Use when taking pictures of food.
•
automatically zooms to the closest position at which it can
focus.
•
The closest possible shooting distance may vary according
to the zoom position. The camera can focus at distance of
3 cm (1.2 in.) at the zoom position at which F and the zoom
indicator glow green (the zoom indicator is positioned to
the left of K).
•
•
The flash does not fire and the flash mode is disabled.
Camera focuses on the subject at the center of the frame. The area focused can be
The camera focuses continuously until focus is locked by pressing the shutter-release
button halfway.
As pictures are easily affected by camera shake, be sure that Vibration reduction
lighting. This adjustment is stored in the camera’s memory even after the camera is
turned off.
•
•
•
l Museum
Use indoors where flash photography is prohibited (for
example, in museums and art galleries) or in other settings in
which you do not want to use the flash.
•
Camera focuses on subject at the center of the frame. The
•
•
•
As pictures are easily affected by camera shake, be sure that Vibration reduction
•
•
The flash does not fire and the flash mode is disabled.
Use of a tripod is recommended in scene modes with which O is indicated. Set Vibration
68
Shooting Suited to Scenes (Scene Mode)
m Fireworks show
O
Slow shutter speeds are used to capture the expanding burst
of light from a firework.
•
always glows green when the shutter-release button is
pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
•
•
The flash does not fire and the flash mode is disabled.
n Copy
Provides clear pictures of text or drawings on a white board or
in print.
•
Camera focuses on subject at the center of the frame. The
•
•
•
Colored text and drawings may not show up well.
The default setting for flash mode is c Off.
o Backlighting
Use when light is coming from behind subject, throwing
features or details into shadow. The flash fires automatically to
“fill in” (illuminate) shadows.
•
Camera focuses on subject at the center of the frame. The
•
•
The flash mode setting is fixed at X Fill flash.
69
Shooting Suited to Scenes (Scene Mode)
Shooting for a Panorama
The camera focuses on the subject at the center of the frame. Use a tripod for the
1
2
3
Press the A button in shooting
mode to display the shooting-mode
selection menu and tap C.
The scene mode selection screen is
displayed.
Shooting mode
Scene
Panorama direction icons are displayed to show the
direction in which pictures will be joined.
Panorama assist
Tap a direction icon.
Select the direction in which pictures will be joined in the
completed panorama; right (D), left (C), up (A) or
down (B).
A different direction can be selected by tapping a different
panorama direction icon.
23
is taken in the next step.
4
Take the first picture.
One third of the picture will be displayed as
translucent.
23
71
Shooting Suited to Scenes (Scene Mode)
5
Take the next picture.
Frame the next picture so that one-third of the
frame overlaps the previous picture and press
the shutter-release button.
Repeat this process until the necessary
number of pictures have been taken to
complete the scene.
22
6
Tap H when shooting is complete.
The camera returns to step 3.
19
B Notes on Panorama Assist
Shooting settings cannot be changed after the first picture is taken. Pictures cannot be deleted,
nor can zoom operate after the first picture has been taken.
mode during shooting. Setting the time allowed to elapse before the auto off function is enabled
to a longer setting is recommended.
D R Indicator
In Panorama assist scene mode, exposure, white balance, and focus
for all pictures in a panorama are fixed at the values for the first
picture in each series.
When the first picture is taken, R is displayed to indicate that
exposure, white balance, and focus are locked.
22
D Panorama Maker 5
D More Information
72
Shooting Smiling Faces (Smart Portrait Mode)
At the default settings, the camera uses the face detection function to detect
human faces, and then automatically releases the shutter when a smile is detected
(smile timer). The skin softening option can be used to smooth skin tones of
human faces.
1
Press the A button in shooting
mode to display the shooting-
mode selection menu and then tap
F.
Shooting mode
Smart portrait
The camera enters smart portrait mode.
2
Frame a picture.
Point the camera at the subject.
When the camera detects a human face, a yellow double
border (focus area) is displayed around that face. When
focus is acquired on that face, the double border will turn
green for a moment and focus is locked.
1/ 250 F3.9
Up to three faces can be detected. When the camera
detects more than one face, the double border is displayed around the face closest to
the center of the frame, and single borders around the others.
Tap the face framed by a single border to change the focus area to that face.
3
4
The shutter is automatically released.
If the camera detects that the face framed by the double border is smiling, Smile timer
Each time the shutter is released, the camera again initiates face detection and smile
detection operations for continuous automatic shooting.
Shooting ends.
To stop automatic shooting of smiling faces, either turn the camera off, set Smile timer
to Off, or press the A button and select another shooting mode.
73
Shooting Smiling Faces (Smart Portrait Mode)
B Notes on Smart Portrait Mode
• Digital zoom is not available.
• Self-timer is not available.
• Touch shutter cannot be enabled.
• Under some shooting conditions, the camera may be unable to detect faces or detect smiles.
B Notes on Skin Softening Function
• More time than usual may be required to save a picture when shooting with skin softening
function.
• In some shooting conditions, facial skin tones may not be smoothed or parts other than face may
be modified though the camera detects a face. If the desired results are not produced, set Skin
softening to Off and shoot again.
• The skin softening level cannot be adjusted when the portrait or night portrait is selected in the
scene mode.
• Retouch effects such as the glamour retouch function’s skin softening effect can be applied to
B Note on Using the Remote Control
When Smile timer is set to On in smart portrait mode and the camera detects a face, the remote
control cannot be used.
C Self-timer Lamp
The self-timer lamp blinks slowly when the smile timer is enabled and the camera detects a face, and
it blinks quickly immediately after the shutter is released.
C Releasing the Shutter Manually
Pictures can also be taken by pressing the shutter-release button. The camera focuses on the subject
at the center of the frame when faces are not detected.
C Auto Power Off in Smile Timer Mode
when either of the situations indicated below persists and no other operations are performed.
• The camera does not detect any faces.
• The camera detected a face, but cannot detect a smile.
D More Information
74
Shooting Smiling Faces (Smart Portrait Mode)
Changing the Smart Portrait Mode Settings
The settings indicated below can be made by tapping the tabs to display the
setting controls in smart portrait mode.
• Each icon also indicates the current setting.
• Tap the icon of the desired item to display the setting screen for that item.
• Tap the tab again to hide the setting controls.
1
23
2
3
4
5
6
OFF
OFF
0.0
23
7
1
2
X Flash mode
A Image mode
Changes made to the image mode setting apply to all shooting modes.
3
4
D Movie options
e Skin softening
Enable skin softening. When the shutter is released, the camera detects one or more
human faces (up to three), and processes the image to soften facial skin tones
before saving the picture.
The degree of skin softening applied can be selected from High, Normal (default
setting), and Low. When Off is selected, the skin softening function is disabled.
•
The effects of skin softening are not visible when framing pictures for shooting.
Check the degree of skin softening performed in playback mode.
75
Shooting Smiling Faces (Smart Portrait Mode)
5
y Blink proof
When On is selected, the camera automatically releases the shutter twice each time
a picture is taken. Of the two shots, one in which the subject’s eyes are open is
saved.
•
If the camera saved a picture in which the subject’s
eyes may have been closed, the dialog shown at
right is displayed for a few seconds.
A blink was detected in the
picture just taken.
•
•
When On is selected, the flash is disabled.
The default setting is Off.
6
7
a Smile timer
•
On (default setting): The camera uses the face detection function to detect a
human face, and then automatically releases the shutter whenever a smile is
detected.
•
Off: The camera does not release the shutter automatically with smile detection.
Press the shutter-release button to take a picture.
o Exposure compensation
C Settings in Smart Portrait Mode
There are functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be
76
Camera Settings that Cannot Be Applied Simultaneously
Some shooting settings cannot be used with other functions.
Restricted function
Flash mode
Setting
Description
Continuous
When Continuous, BSS, or Multi-shot 16 is
selected, flash is disabled.
Blink proof
When On is selected, Blink proof is disabled.
Subject tracking
When the touch shooting is set to Subject
tracking, self-timer is disabled.
Self-timer
When Multi-shot 16 is selected, the Image
mode setting is fixed at L (image size: 2560 ×
1920 pixels).
Continuous
When 3200 or 6400 is selected for ISO
sensitivity, the image mode setting of only M
2048×1536, N 1024×768, or O 640×480 can
be selected. If any image mode setting other
than above is selected, the image mode setting is
automatically changed to M 2048×1536 when
ISO sensitivity is set to 3200 or 6400.
Image mode
ISO sensitivity
Subject tracking
When the touch shooting is set to Subject
tracking, macro mode is disabled.
Macro mode
ISO sensitivity
When Multi-shot 16 is selected, the ISO
sensitivity setting is automatically specified
according to the brightness.
Continuous
When taking a picture using the self-timer, the
continuous setting is fixed to Single.
Continuous
Touch shutter
When using the touch shutter function, one
picture is taken each time the monitor is tapped.
Continuous
When taking a picture using Continuous, BSS,
or Multi-shot 16, Blink warning is disabled.
Blink warning
When taking a picture using Continuous or BSS,
shooting date cannot be imprinted on the
picture.
Continuous
Blink proof
Date imprint
When On is selected, Date imprint is disabled.
Vibration
reduction
When On (hybrid) is selected, Date imprint is
disabled.
77
Camera Settings that Cannot Be Applied Simultaneously
Restricted function
Digital zoom
Setting
Description
Continuous
When Multi-shot 16 is selected, digital zoom is
not available.
Subject tracking
When the touch shooting is set to Subject
tracking, digital zoom is disabled.
C Restricted Functions in Shooting Mode
the functions available in each shooting mode:
D More Information
78
More on Playback
Operations in Full-frame Playback Mode
Press the c (playback) button to enter playback mode
15/11/2010 15:30
0004. JPG
The following operations are available in full-frame
playback mode.
4
4
Option
Use
Description
Drag the picture to the right to display the
A
Select a picture
subsequent picture.
–
Rotate the zoom control to f (h) to display
4, 9 or 16 picture thumbnails.
View thumbnails
Playback zoom
Playback movies
f (h)
g (i)
R
Rotate the zoom control to g (i) to enlarge
the picture up to 10×.
Tap to return to full-frame playback mode.
H
Tap R to play back the movie currently
displayed.
Set the picture
rating/play back
pictures by rating
Right tab Apply a rating of one to five to each picture
(P) or play back pictures by rating.
Make playback
settings
Bottom Tap the bottom tab to specify the playback
tab
settings and edit pictures.
Press the c button to display the playback-
pictures, auto sort, or list by date mode.
Switch to another
playback mode
b
Switch to shooting
mode
Press the A button, b (movie-record)
button, or shutter-release button.
Switches to
projector mode
Press the P button to project pictures with
the built-in projector.
P
C Picture Orientation (Portrait or Landscape)
79
Viewing Multiple Pictures: Thumbnail Playback
Rotate the zoom control to f (h) in full-frame
sheets” of thumbnail images.
10
The following operations are available while thumbnails are displayed.
To
Use
Description
A
Rotate the zoom control to f (h) to
increase the number of the picture
thumbnails displayed: 4 ➝ 9 ➝ 16.
Increase the number
of pictures displayed
f (h)
Rotate the zoom control to g (i) to decrease
the number of picture thumbnails displayed:
16 ➝ 9 ➝ 4. Rotate the zoom control to g (i)
in 4-picture thumbnail display to return to
full-frame playback mode.
–
–
Decrease the
number of pictures
displayed
g (i)
Tap B or C, or drag the slider at right on the
screen. It is also possible to scroll through the
thumbnails by dragging your finger up or
down across the monitor.
Scroll display
Bor C
Switch to full-frame
playback mode
–
Tap a picture.
Set the picture
rating/play back
pictures by rating
Right tab Apply a rating of one to five to each picture
(P)
or play back pictures by rating.
Tap the bottom tab, and Delete, Slide show,
Protect, or Print set settings can be
enabled.
Make playback
settings
Bottom
tab
b
Switch to shooting
mode
Press the A button, b (movie-record)
button, or shutter-release button.
80
Viewing Multiple Pictures: Thumbnail Playback
C Thumbnail Playback Mode Display
are selected, the icons shown at right are
displayed with them. Movies are displayed as
film frames.
10
Protect icon
Rating setting
icon
1
Film frames
C Thumbnail Display in Favorite Pictures and Auto Sort Mode
the favorite pictures icon is displayed in the monitor.
2
pictures’ category icon is displayed in the monitor.
3
81
Taking a Closer Look: Playback Zoom
Rotating the zoom control to g (i) in full-frame
portion of the current picture.
• The guide displayed at bottom right shows the
portion of the image currently displayed.
×
3.0
The following operations can be performed while
picture display is enlarged.
To
Zoom in
Use
Description
A
Zoom increases each time the zoom control is
rotated to g (i), to a maximum of 10×.
g (i)
–
–
–
Zoom decreases each time the zoom control is
rotated to f (h). When the magnification
ratio reaches 1×, the display returns to full-frame
playback mode.
Zoom out
f (h)
The area of the picture currently displayed can
be changed by dragging the picture.
Change the
display area
–
Delete pictures
Tap E to delete the picture.
E
H
Switch to full-
frame playback
Tap H to switch to full-frame playback.
Tap G to crop current picture to contain only
the portion visible in the monitor.
Crop picture
G
b
Press the A button, b (movie-record) button,
or shutter-release button.
Switch to
shooting mode
Pictures Taken with Face Detection
When zooming in (playback zoom) on a picture taken
the zoom control to g (i), the picture will be enlarged
with the face detected with shooting at the center of
the monitor (except pictures taken with Continuous,
×
2.0
• If more than one face was detected, the picture will
be enlarged with the face on which focus was acquired at the center of the
monitor. Tap M or N to display other detected faces.
• When the zoom control is rotated to g (i) or f (h) to adjust the zoom ratio,
the center of the picture, rather than the face, is displayed at the center of the
monitor (normal playback zoom display).
82
Selecting Playback Mode
Following playback modes can be selected.
c
h
F
Playback mode
Play back all pictures.
Favorite pictures mode
Play back pictures added to an album.
Auto sort mode
Play back pictures and movies automatically sorted to the selected category with
shooting.
C
List by date mode
Play back pictures taken on the selected date.
1
Press the c button in playback
mode.
The playback mode selection menu is
displayed.
2
Tap the desired playback mode icon.
Playback mode
Play
The camera enters the selected playback mode.
To return to the current playback mode, press the c
button.
83
Sorting Favorite Pictures (Favorite Pictures Mode)
Pictures can be sorted to albums. Once pictures have been sorted to albums,
favorite picture mode can be used to play back only the pictures in a specific
album.
• Adding pictures to albums makes finding a particular picture faster and easier.
• Pictures can be sorted to albums categorized by themes such as travel or
weddings.
• A single picture can be added to multiple albums.
Adding Pictures to Albums
Pictures can be added to albums and sorted.
1
2
Select a picture and tap the bottom tab.
15/11/2010 15:30
0004. JPG
Display a picture in full-frame playback mode and tap the
bottom tab.
4
4
3
4
Tap h.
The albums selection screen is displayed.
Tap the desired album.
Favorite pictures
The picture is added to the album and monitor display
returns to full-frame playback mode.
01 02 03 04 05
06 07 08 09
Repeat step 1 and 2 to add a picture to multiple albums.
84
Sorting Favorite Pictures (Favorite Pictures Mode)
B Notes on Adding Favorite Pictures
• An album can contain up to 200 pictures.
• Movies cannot be added to albums.
• If the selected picture has already been added to an album, the album icon turns yellow.
• When pictures are added to albums, they are not physically copied to albums or moved from the
D More Information
85
Sorting Favorite Pictures (Favorite Pictures Mode)
Viewing Pictures in an Album
Pictures can be displayed by selecting the album to which they were added in
“h favorite pictures mode”.
• In full-frame playback mode, just as with normal playback mode, picture display
can be enlarged, or pictures can be displayed as thumbnails. When the bottom
tab is tapped to display the setting controls, settings can be made and editing
1
Press the c button in playback
mode to display the playback-mode
Playback mode
Favorite pictures
A list of albums is displayed.
2
Tap the desired album.
Favorite pictures
01
04
07
02
05
08
03
06
09
The pictures in the selected album will be displayed in
full-frame playback mode.
15/11/2010 15:30
0004. JPG
The icon for the current album is displayed on the screen.
Repeat steps 1 and 2 to select a different album.
4
4
86
Sorting Favorite Pictures (Favorite Pictures Mode)
Removing Pictures from Albums
To remove a picture from an album without permanently deleting it, follow the
procedures described below.
• Select the desired picture in full-frame display in step
tab to display the setting controls, and then tap h.
The confirmation dialog is displayed.
• Tap Yes to remove the picture from the album. To
exit without removing the picture, tap No.
Remove this picture from
favorites?
Yes
No
B Note on Deleting Pictures in Favorite Pictures Mode
Note that deleting a picture in favorite pictures mode deletes not only the picture from the album,
but also deletes the original picture from the internal memory or memory card permanently
87
Sorting Favorite Pictures (Favorite Pictures Mode)
Operations in Favorite Pictures Mode
The following operations are available in the album list screen.
To
Use
Description
A
Change the album
icon
Tap the bottom tab to display the setting
controls, and tap K.
K
When the bottom tab is tapped to display the
setting controls, and c is tapped, the album
selection screen is displayed. Select the
Delete all pictures in
the selected album
–
c
desired album and tap
.
I
Change playback
mode
Press the c button to display the playback-
mode selection menu.
b
Switch to shooting
mode
Press the A button, b (movie-record)
button, or shutter-release button.
88
Sorting Favorite Pictures (Favorite Pictures Mode)
Changing Icons Assigned to Albums
The icon assigned to an album can be changed to reflect the theme of pictures
included in the album.
1
2
3
4
Press the c button in playback
mode to display the playback-mode
Playback mode
Favorite pictures
A list of albums is displayed.
Tap the bottom tab to display the setting
controls and tap K.
Favorite pictures
01
04
02
05
03
06
Tap the desired folder.
Choose icon
The album icon and icon color selection screen is
displayed.
01
04
07
02
05
08
03
06
09
Tap the desired icon to be assigned to an
album, tap or drag the slider to select the
icon’s color, and tap I.
Choose icon
01
02
03
01
The icon is modified and the monitor display returns to
the list of albums.
Tap J to return to the album selection screen without
changing settings.
B Notes on Icons for Albums
Choose icons for albums separately for the internal memory and for every memory card used.
• To change the icon for an album containing pictures stored in the internal memory, remove the
memory card from the camera.
• The default setting for icons are numbers.
89
Sorting Favorite Pictures (Favorite Pictures Mode)
C Adding/Viewing Favorite Pictures
When pictures are added to albums, they are not physically copied to albums or moved from the
albums. In favorite pictures mode, pictures with file names that have been added to the specified
mode deletes not only the picture from the album, but also deletes the original picture from the
internal memory or memory card permanently.
Adding Pictures to Albums
Album 1
Internal memory/memory card
0001.JPG
0003.JPG
0002.JPG
0004.JPG
0001.JPG
0002.JPG
0003.JPG
Adds file names
Album 2
Adds file names
0001.JPG
0004.JPG
Favorites Picture Playback
0001.JPG
Album 1
0002.JPG
0003.JPG
References
files
0001.JPG
0002.JPG
0003.JPG
Internal
memory/
memory card
Playback
90
Image Searching in Auto Sort Mode
When shooting pictures and movies, they are automatically sorted to one of the
categories shown below. When “F (auto sort) mode” is selected, pictures and
movies can be viewed by selecting the category to which they were sorted.
Z Smile
D Portraits
u Food
U Landscape
D Movie
V Dusk to dawn
M Retouched copies
D Close-ups
W Other scenes
• In full-frame playback mode, just as with normal playback mode, picture display
can be enlarged, pictures can be displayed as thumbnails, and movies can be
played back. When the bottom tab is tapped to display the setting controls,
settings can be made and editing can be performed on pictures sorted to the
Viewing Pictures in Auto Sort Mode
1
Press the c button in playback
mode to display the playback-mode
Playback mode
Auto sort
A list of categories is displayed.
2
Tap the desired category.
Auto sort
For more information on categories, see “Auto Sort Mode
A picture sorted to the selected category will be
displayed in full-frame playback mode.
15/11/2010 15:30
0004. JPG
The icon for the category currently selected is displayed.
Repeat steps 1 and 2 to select a different category.
4
4
91
Image Searching in Auto Sort Mode
Auto Sort Mode Categories
Category
Description
timer setting set to On are displayed.
Z Smile
function. Pictures taken in Portrait*, Night portrait*, Party/
timer setting set to Off.
D Portraits
u Food
U Landscape
Pictures taken in Night landscape*, Sunset, Dusk/dawn, and
V Dusk to dawn
Pictures taken in A (auto) mode with the macro mode setting
D Close-ups
D Movie
M Retouched copies
All other pictures that cannot be defined by the categories
described above are displayed.
W Other scenes
B Notes on Auto Sort Mode
• Up to 999 pictures and movie files can be sorted to each category in auto sort mode. If 999
pictures or movies have already been sorted to a specific category, new pictures and movies
cannot be sorted to that category or displayed in auto sort mode. Display pictures and movies that
cannot be displayed in auto sort mode.
• Pictures or movies recorded by a camera other than the COOLPIX S1100pj cannot be displayed in
auto sort mode.
92
Image Searching in Auto Sort Mode
Operations in Auto Sort Mode
The following operations are available in the category list screen.
To
Use
Description
A
When the bottom tab is tapped to display the
setting controls, and c is tapped, the category
selection screen is displayed. Select the desired
category and tap I.
Delete all pictures
in the selected
category
–
c
Switch to another
playback mode
Press the c button to display the playback-
mode selection menu.
b
Switch to
shooting mode
Press the A button, b (movie-record) button,
or shutter-release button.
93
Selecting Pictures Taken on a Specific Day (List by Date Mode)
In “C list by date mode”, pictures taken on a same date can be played back.
• In full-frame playback mode, just as with normal playback mode, picture display
can be enlarged, pictures can be displayed as thumbnails, and movies can be
played back. When the bottom tab is tapped to display the setting controls,
settings can be made and editing can be performed on pictures taken on a
Selecting a Date in List by Date Mode
1
Press the c button in playback
mode to display the playback-mode
Playback mode
List by date
Dates for which pictures exist are listed.
2
Tap the desired date.
List by date
2010/ 11
Sun Mon Tue Wed Thu
Fri
Sat
To change the displayed month, tap C or D.
1
8
2
9
3
4
5
6
7
10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30
The first picture taken on the selected date will be
displayed full-frame.
15/11/2010 15:30
0004. JPG
Repeat steps 1 and 2 to select a different date.
4
4
B Notes on List by Date Mode
• Up to 9,000 of the most recently recorded pictures can be displayed in list by date mode.
• Pictures taken before the date and time have been set are recognized as having been taken on
January 1, 2010.
94
Selecting Pictures Taken on a Specific Day (List by Date Mode)
Operations in List by Date Mode
The following operations are available in the list by date screen.
To
Use
Description
A
Change the
month
C or D Tap C or D.
–
–
When the bottom tab is tapped to display the
setting controls, and c is tapped, the date
selection screen is displayed. Select the desired
date and tap I.
Delete all pictures
in the selected
date
c
Switch to another
playback mode
Press the c button to display the playback-
mode selection menu.
b
Switch to
shooting mode
Press the A button, b (movie-record) button,
or shutter-release button.
95
Playback Options
To adjust picture settings or edit pictures, tap the tab in full-frame playback mode
to display the setting controls.
• The controls available and monitor display vary depending upon the current
picture and camera settings.
• Tap the icon of the desired item to display the setting screen for that item.
• Tap the tab again to hide the setting controls.
15/11/2010 15:30
0004. JPG
5
4
3
1
2
1
0
4
4
15/11/2010 15:30
0004. JPG
2
3
4
5
6
4
4
9
8
7
1
2
5
6
7
h Add pictures to albums (except in
Remove pictures from albums (in
E
8
3
4
9
* This function can also be performed in thumbnail playback mode. If the camera is switched
to thumbnail playback mode while pictures are played back in favorite pictures, auto sort,
or list by date mode, this function can be performed only on the pictures sorted to the
selected folder, category or date.
96
Setting the Picture Rating
A rating of one to five can be assigned to each picture. It is also possible to play
back only the pictures that have been assigned a specific rating.
1
15/11/2010 15:30
0004. JPG
4
4
2
onto the picture.
5
4
3
2
1
0
Rating is applied.
Drag and drop another icon to change the rating.
Drag and drop L to cancel the rating.
A picture’s rating can be confirmed by the number of
shown in full-frame playback mode.
Playing Back Pictures by Rating
1
15/11/2010 15:30
0004. JPG
4
4
2
Tap a rating icon to display the pictures with
that rating.
5
4
3
2
1
0
The icon of the tapped rating turns yellow, and only the
pictures assigned with the selected rating are displayed.
Multiple ratings can be selected.
To stop displaying pictures of a selected rating, tap the icon
of the rating to deselect it.
To stop playback by rating, select or deselect all ratings.
B Notes on the Rating
• Each rating can be applied to a maximum of 999 pictures.
• Rating cannot be applied to movies.
• The ratings applied on the COOLPIX S1100pj are not recognized by your computer.
97
b Enjoying Slide Show
Play back pictures stored in the internal memory or on a memory card one by one
in an automated “slide show.”
1
Tap the bottom tab in playback mode to
display the setting controls, and tap b.
2
Tap Start.
Slide show
Effects
Start
To change the effect, tap Effects before selecting Start,
and select from Classic or Zoom.
DEMO
To repeat the slide show automatically, tap Loop before
tapping Start. A check mark (w) will be added to the
loop option when enabled.
Loop
Tap l to play back sample images stored in the camera
with an automatic loop function.
To exit without playing back pictures in a slide show, tap J.
3
The slide show begins.
Tap the monitor to display the operation panel at the
bottom of the screen.
Tap the icons in the operation panel to perform the
corresponding operation. The following operations are
available.
To
Tap
Description
Adjust the volume of background music.
Adjust volume
X
Rewind
Tap and hold O to rewind slide show.
O
P
Advance
Tap and hold
P
to advance slide show.
Pause playback.
•
To resume playback, tap R displayed at the
center of the screen.
Pause
End
Q
S
End slide show.
B Notes on Slide Show
• Only the first frame of movies included in slide shows is displayed.
• Even when Loop is selected, the slide show will only be played for a maximum of 30 minutes
98
d Protecting Important Pictures (Protect)
Protect selected pictures from accidental deletion. Protected pictures are
Protecting One Picture
1
2
3
Select the desired picture to be protected in
full-frame playback mode and tap the bottom
tab.
15/11/2010 15:30
0004. JPG
4
4
Tap d.
Tap On.
Protect
The selected picture is protected.
To exit without protecting pictures, tap J.
On
Off
B Note on Protecting Pictures
Note that formatting the camera’s internal memory or the memory card will permanently delete
99
d Protecting Important Pictures (Protect)
Protecting Multiple Pictures
Multiple pictures can be protected at a time.
1
2
3
tap the bottom tab to display the setting
controls, and tap d.
10
The monitor display switches to the Protect screen.
Tap the desired pictures to be protected.
Protect
When a picture is selected, a check mark is displayed. To
cancel the selection, tap the picture again.
Tap n or o, or rotate the zoom control to g or f to
change the number of pictures displayed.
Tap I.
Protect
The selected pictures are protected.
To exit without protecting pictures, tap J.
Removing Protection from Pictures
• To remove protection from a picture, display a protected picture in full-frame
tap Off in step 3.
• To remove protection from multiple pictures at a time, uncheck protected
pictures in step 2 of ”Protecting Multiple Pictures”.
100
a Creating a DPOF Print Order: Print Set
When printing pictures stored on the memory card using any of the following
methods, the Print set option in the playback menu is used to create digital “print
orders” for printing on DPOF-compatible devices.
• Taking the memory card to a digital photo lab
print order can also be created for pictures stored in the internal memory if the
memory card is removed from the camera
Creating a Print Order for One Picture
1
2
3
Select the desired picture in full-frame
playback mode and tap the bottom tab.
15/11/2010 15:30
0004. JPG
4
4
Tap a.
Tap the desired number of copies and tap I.
To exit without making the print setting, tap J.
Print set
1
2
7
3
8
4
9
5
0
6
If the total number of pictures in a print order, including
pictures just added, exceeds 99, the screen shown at
right will be displayed.
Print set
Too many images selected.
Remove print marking from
other images?
-
Tap Yes to remove pictures previously added from the
print order and restrict the print order to pictures just
marked.
Yes
Cancel
-
Tap Cancel to remove the pictures just added from the
print order and restrict the print order to pictures
previously marked.
101
a Creating a DPOF Print Order: Print Set
4
Choose whether or not to print shooting date
and photo information.
Print set
Date
Tap Date to place w in the checkbox to imprint the
Info
shooting date on the picture.
Tap Info to place w in the checkbox to imprint the
photo information (shutter speed and aperture) on the
picture.
Tap I to complete the print order.
Pictures selected for printing are recognized by the w
icon displayed with playback.
15/11/2010 15:30
0004. JPG
4
4
102
a Creating a DPOF Print Order: Print Set
Creating a Print Order for Multiple Pictures
1
tap the bottom tab to display the setting
10
controls, and tap a.
The monitor display switches to the print set screen.
2
Tap the desired pictures to print (up to 99)
and tap A or B at the upper left in the
monitor to specify the number of copies (up
to nine) for each.
Print selection
9
×
×
1
1
Pictures selected for printing can be recognized by the
check mark (y) and the numeral indicating the number
of copies to be printed. If no copies have been specified
for pictures, the selection is canceled.
Tap n or o, or rotate the zoom control to g or f to change the number of pictures
displayed.
Tap n to remove print marking from all pictures and cancel the print order.
Tap I when setting is complete.
3
Choose whether or not to print shooting date
and photo information.
Print set
Date
Tap Date to place w in the checkbox to imprint the
Info
shooting date on all pictures in the print order.
Tap Info to place w in the checkbox to imprint the
photo information (shutter speed and aperture) on all
pictures in the print order.
Tap I to complete the print order.
103
a Creating a DPOF Print Order: Print Set
Canceling Print Order
• To remove a print marking from a picture, display a picture selected for printing
in full-frame playback mode, follow the procedure in “Creating a Print Order for
• To remove print markings from multiple pictures at a time, remove the print
markings of the desired pictures in step 2 of “Creating a Print Order for Multiple
B Notes on Printing Shooting Date and Photo Information
When the Date and Info options are enabled in the print set option, shooting date and photo
printing of shooting date and photo information is used.
• Photo information cannot be printed when the camera is connected directly to a printer, via the
• Note that Date and Info settings are reset when the print set option is displayed.
• The date printed is that recorded when the picture was taken.
Changing the camera’s date using the Date option in the setup
menu after a picture has been taken has no effect on the date
printed on the picture.
15.11.2010
D Date Imprint
When date and time of recording are imprinted on pictures using the Date imprint option
picture when they are taken. Pictures with the date imprinted on them can be printed from printers
that do not support printing of the date on pictures.
Only the date and time imprinted on pictures with the date imprint option will be printed, even if
the Print set date option is enabled.
104
f Rotate Image
Specify the orientation in which recorded pictures are displayed with playback.
Still pictures can be rotated 90 degrees clockwise or 90 degrees counterclockwise.
Pictures that were recorded in portrait (“tall”) orientation can be rotated up to 180
degrees in either direction.
1
2
3
Select a picture in the full-frame playback
the setting controls, and tap M.
The retouch menu is displayed.
Tap f.
Retouch
Rotate image
The rotate image screen is displayed.
Tap J or I.
Rotate image
Rotate image
Rotate image
J
I
I
J
Rotate 90 degrees
clockwise
Rotate 90 degrees
counterclockwise
The picture rotates 90 degrees.
Tap I to finalize display orientation and save the orientation information with the
picture.
To exit without rotating image, tap J.
105
E Voice Memos: Recording and Playback
Use the camera’s built-in microphone to record voice memos for pictures.
Recording Voice Memos
1
2
3
Select the desired picture from full-frame
tab.
15/11/2010 15:30
0004. JPG
4
4
Tap E.
The screen for recording voice memos is displayed.
Tap W to record a voice memo.
Recording ends after about 20 seconds.
Do not touch the built-in microphone during recording.
To exit without recording voice memos, tap J.
20s
During recording, o blinks in the monitor.
Recording ends when S is tapped during recording.
When recording ends, the voice memo playback screen is
displayed. Follow the instructions in step 3 of “Playing Voice
15s
D More Information
106
E Voice Memos: Recording and Playback
Playing Voice Memos
Pictures for which voice memos have been recorded are indicated by p in full-
frame playback mode.
1
2
3
Select the desired picture from full-frame
tab.
15/11/2010 15:30
0004. JPG
4
4
Tap E.
The voice memo playback screen is displayed.
Tap R to play the voice memo.
Tap S to stop playback.
Tap X during playback to adjust playback volume.
f blinks during playback.
To exit without playing voice memos, tap J.
6s
Deleting Voice Memos
delete only the voice memo.
File will be deleted. OK?
Yes
No
B Notes on Voice Memos
• When a picture with a voice memo attached is deleted, both the picture and its voice memo are
deleted.
• If a voice memo already exists for the current picture, it must be deleted before a new voice memo
can be recorded.
• The COOLPIX S1100pj is not able to record a voice memo for pictures taken with another make or
model of digital camera.
107
Editing Pictures
Editing Functions
Use the COOLPIX S1100pj to edit pictures in-camera and store them as separate
Editing function
Description
Draw on pictures, or add decorations, to pictures.
Quick retouch
Easily create retouched copies in which contrast and saturation
have been enhanced.
Create a copy of the current picture with enhanced brightness
and contrast, brightening dark portions of the picture.
Stretch the current picture horizontally to make the subject
appear thinner or wider.
Adjust the perspective of pictures taken in landscape orientation.
Apply perspective control similar to that available with shift
lenses. This option is suited to pictures of buildings or
architecture.
Perspective control
Apply a variety of effects using digital filter. The available effects
Fisheye, and Miniature effect.
Glamour retouch
Make facial skin tone softer and optionally make faces look smaller
with larger eyes.
Create a small copy of pictures suitable for use as e-mail
attachments.
Crop a portion of the picture. Use to zoom in on a subject or
arrange a composition.
See page 105 for the rotate image function for more information.
B Notes on Picture Editing
• The editing functions of COOLPIX S1100pj cannot be used for pictures taken with another make or
model of digital cameras.
• If no face is detected in a picture, a copy cannot be created using the glamour retouch function
• Edited copies created with COOLPIX S1100pj may not be displayed properly on a different model
of digital camera. It may also be impossible to transfer them to a computer using a different model
of digital camera.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card to store the edited copies.
108
Editing Functions
C Restrictions on Picture Editing
When an edited copy is further modified with another editing function, check the following
restrictions.
Editing function used
Paint
Editing function to add
The paint, small picture, or crop function can be added.
Quick retouch
D-Lighting
Stretch
Perspective control
Filter effects
The paint, small picture, glamour retouch, or crop function can be
added.
Glamour retouch
The editing functions other than glamour retouch can be added.
Another editing function cannot be added.
Small picture
Another editing function cannot be added. However, the paint
function can be applied to cropped copies saved at an image size of
640 × 480 pixels or larger.
Crop
• Copies created with editing functions other than the paint function cannot be further edited with
the same function used to create them.
• When combining the small picture or crop function and another editing function, use the small
picture and crop functions after other editing functions have been applied.
• Retouch effects such as the glamour retouch function’s skin softening effect can be applied to
D Original and Edited Pictures
• Copies created with editing functions are not deleted if the original pictures are deleted. The
original pictures are not deleted if copies created with editing functions are deleted.
• Edited copies are stored with the same recording date and time as the original.
image are not applied to edited copies.
109
Picture Editing
U Paint
Draw on pictures or decorate them. Shooting date decoration can also be added.
Painted copies are stored as separate files.
1
2
Select a picture in full-frame playback mode
setting controls, and tap U.
Undo
Use the I, J, K, and L tools to paint
pictures.
Pen
For more information about using each tool, see “Write
Tap n to display the picture in full-frame playback mode
and tap n again to enlarge the picture display by 3×.
Tap
,
,
, or
to change the portion of the
A D B
C
picture in the monitor. Tap o to return to the original
display size.
Frame
Decoration
Eraser
Tap J to undo the last operation applied using the pen,
eraser, or decoration tool (up to the last five operations
can be undone).
Pen
3
Tap I.
Frame
110
Picture Editing
4
Tap Yes.
A new, painted copy is created.
Save OK?
M 2048×1536 or larger are saved at a size of 2048 ×
1536 and pictures taken at N 1024×768 or O 640×480
are saved at a size of 640 × 480.
Yes
No
To exit without saving the copy, tap No.
Painted copies can be recognized by the d icon displayed during playback.
Using the Paint Tools
Write and Draw on Pictures
Pen
Tap I to write or draw on pictures.
To change the pens’ color or thickness, tap the bottom
tab to display the screen shown at right.
• Tap or drag the pen’s color slider to select pen’s
color.
Pen’s
color
Pen’s
thickness
• Tap the pen’s thickness slider to select pen’s
thickness.
Erase Paint Tool Additions
Eraser
Tap J to erase additions to pictures using the paint or
decoration tool.
To change the eraser’s size, tap the bottom tab to
display the screen shown at right.
• Tap the eraser’s size slider to select the size of the
eraser.
Eraser’s size
111
Picture Editing
Add Decorations
Decoration type
Tap K to add a decoration.
To change the decoration type or size, tap the bottom
tab to display the screen shown at right.
Decoration
• Decoration type can be selected from 14 types.
• Tap the decoration size slider to select the
decoration size.
• When f is selected for the decoration type, f (day,
month, year) and S (day, month, year, time) options
are available.
Decoration size
Add a Frame
Frame
Tap L to add a frame around the picture.
• Tap C or D to display seven different frames one
at a time. Tap I to select a frame.
B Notes on Shooting Date Decoration
of O 640×480, the shooting date may be difficult to read. Set Image mode to N 1024×768 or
larger when shooting.
• The date added with the shooting date decoration uses the format selected in the setup menu’s
• The date and time added with the shooting date decoration are the date and time at which the
picture was taken. These cannot be changed.
D More Information
112
Picture Editing
k Quick Retouch: Enhancing Contrast and Saturation
Quick retouch can be used to easily create retouched copies in which contrast and
saturation have been enhanced. Copies created with the quick retouch function
are stored as separate files.
1
Select a picture in full-frame playback mode
setting controls, and tap M.
The retouch menu is displayed.
2
Tap k.
Retouch
Quick retouch
The screen for selecting the degree of enhancement is
displayed.
3
4
Choose the degree of enhancement
performed and tap I.
Quick retouch
Tap Yes.
A new retouched copy is created.
To exit without saving the copy, tap No.
Save OK?
Copies created with the quick retouch option can be
recognized by the a icon displayed in playback mode.
Yes
No
D More Information
113
Picture Editing
I D-Lighting: Enhancing Brightness and Contrast
D-Lighting can be used to create copies with enhanced brightness and contrast,
brightening dark portions of a picture. New copies are stored as separate files.
1
Select a picture in full-frame playback mode
setting controls, and tap M.
The retouch menu is displayed.
2
Tap I.
Retouch
D-Lighting
The original version will be shown on the left and the
edited version will be shown on the right.
3
4
Tap I.
D-Lighting
Tap Yes.
A new, edited copy is created.
To exit without saving the copy, tap No.
Save OK?
Copies created with the D-Lighting function can be
recognized by the c icon displayed in playback mode.
Yes
No
D More Information
114
Picture Editing
P Stretch: Stretching Pictures
Stretch pictures horizontally. Stretched copies are stored as separate files.
1
2
3
4
5
Select a picture in full-frame playback mode
setting controls, and tap M.
The retouch menu is displayed.
Tap P.
Retouch
Stretch
Tap q or r, or tap or drag the slider at the
bottom of the screen to adjust stretch effect.
Stretch
Tap I.
Stretch
Tap Yes.
A new, stretched copy is created.
To exit without saving the copy, tap No.
Save OK?
Stretched copies can be recognized by the r icon
displayed in playback mode.
Yes
No
D More Information
115
Picture Editing
O Perspective Control: Adjusting a Sense of Perspective
Adjust the sense of perspective in the picture taken in landscape orientation.
Copies created with the perspective control function are stored as separate files.
1
2
3
Select a picture in full-frame playback mode
setting controls, and tap M.
The retouch menu is displayed.
Tap O.
Retouch
Perspective control
Tap y or z, or tap or drag the slider at the
bottom of the screen to adjust perspective
control.
Perspective control
4
5
Tap I.
Perspective control
Tap Yes.
A new, edited copy is created.
To exit without saving the copy, tap No.
Save OK?
Copies created using the perspective control function can
be recognized by the q icon displayed in playback mode.
Yes
No
D More Information
116
Picture Editing
i Filter Effects (Digital Filter)
Apply a variety of effects using digital filter. The available effects are Color
options, Soft, Selective color, Cross screen, Fisheye, or Miniature effect.
New copies are stored as separate files.
1
2
3
Select a picture in full-frame playback mode
setting controls, and tap M.
The retouch menu is displayed.
Tap i.
Retouch
Filter effects
Tap C or D to select the type of the effects.
Color options
Type
Description
Modify color tones.
Select option from o (vivid color),
Color options
•
p (black-and-white), q (sepia), or
r (cyanotype), and tap I.
Color options
117
Picture Editing
Type
Description
Give the picture a soft look by
Soft
blurring the area surrounding the
point that is tapped.
•
Tap the monitor, select the degree
of effects, and tap I.
Soft
Keep one specified color in the picture, and change the other colors
to black and white.
Selective color
•
Tap the color slider displayed on the screen to select the color to
keep, and tap I.
Produce star-like rays of light that radiate outward from bright
objects such as sunlight reflections and city lights. This effect is
suitable for night scenes.
Cross screen
Fisheye
•
Confirm the degree of enhancement, and tap I.
Make a picture look as if it were taken with a fisheye lens. This effect
is well-suited for pictures taken in macro mode.
•
Confirm the degree of enhancement, and tap I.
Make a picture look like a miniature scene taken in macro mode. This
effect is well-suited for pictures taken from a high vantage point
with the main subject at the center of the picture.
Miniature
effect
•
Confirm the degree of enhancement, and tap I.
A confirmation screen for saving the edited copy is displayed.
Tap J to return to the retouch menu without making any changes.
4
Tap Yes in the confirmation dialog.
A new, edited copy is created.
Save OK?
To exit without saving the copy, tap No.
Copies created using the filter effects function can be
recognized by the i icon displayed in playback mode.
Yes
No
D More Information
118
Picture Editing
j Glamour Retouch
Glamour retouch can be used to soften the skin tone of faces detected in a picture
and make the faces look smaller with wider eyes. New copies are stored as
separate files.
1
2
3
Select a picture in full-frame playback mode
setting controls, and tap M.
The retouch menu is displayed.
Tap j.
Retouch
Glamour retouch
Tap e (skin softening) or k (both).
e: Soften facial skin tones.
Glamour retouch
k: Soften facial skin tones, make faces look smaller, and
make eyes look larger.
The preview screen is displayed.
4
Preview the result of the effects.
Preview
Skin tones in up to 12 faces, in the order of that closest to
the center of the frame, are softened.
Tap Before or After to view the picture with or without
the effects.
Before
After
If more than one face was retouched, tap M or N to
display a different face.
To change the effect, tap J to return to step 3.
Tap I to display the confirmation dialog for saving the new copy.
119
Picture Editing
5
Tap Yes.
A new, edited copy is created.
To exit without saving the copy, tap No.
Save OK?
Copies created using the glamour retouch function can be
recognized by the j icon displayed in playback mode.
Yes
No
B Notes on Glamour Retouch
• If no faces are detected in the picture, the glamour retouch function cannot be used.
• The glamour retouch function may not perform as expected depending on the direction in which
the faces are looking or the brightness of the faces in the picture.
D More Information
120
Picture Editing
g Small Picture: Making Smaller Pictures
Create a small copy of the current picture. This feature is useful for creating copies
for display on Web pages or e-mail attachments. Small copies are stored as JPEG
files with a compression ratio of 1:16. The l 640×480, m 320×240, and
n 160×120 sizes are available.
1
2
3
4
Select a picture in full-frame playback mode
setting controls, and tap M.
The retouch menu is displayed.
Tap g.
Retouch
Small picture
Tap the desired small copy size control and
tap I.
Small picture
×
320 240
Tap Yes.
A new, small copy is created.
To exit without saving the copy, tap No.
The copy is displayed with a gray frame.
Create small picture file?
Yes
No
D More Information
121
Picture Editing
o Crop: Creating a Cropped Copy
Create a copy containing only the portion visible in the monitor when G is
separate files.
1
Rotate the zoom control to
g
(i) in full-frame
To crop a picture displayed in “tall” (portrait) orientation,
zoom in on the picture until the black bars displayed on
the both sides of the monitor disappear. The cropped
picture will be displayed in landscape orientation.
To crop the picture in its current “tall” (portrait)
displayed in landscape orientation. Next, enlarge the picture for cropping, crop the
picture, and then rotate the cropped picture back to “tall” (portrait) orientation.
2
3
4
Refine copy composition.
Rotate the zoom control to g (i) or f (h) to adjust the
zoom ratio.
Drag the picture so that only the portion to be copied is
visible in the monitor.
×
3.0
Tap G.
×
3.0
Tap Yes.
A cropped copy is created.
Save this image as
To exit without saving the copy, tap No.
displayed?
Copies created using the crop function can be
recognized by the a icon displayed in playback mode.
Yes
No
C Image Size
As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced.
When the size of the cropped copy is 320 × 240 or 160 × 120, a gray frame is displayed around the picture,
and the small picture icon m is displayed on the top of the screen in full-frame playback mode.
D More Information
122
Movie Recording and Playback
Recording Movies
High-definition movies with sound recorded via the built-in microphone can be
recorded.
• The maximum recording time for a single movie is 29 minutes, even when there
1
2
Turn on the camera and be sure that it is in
shooting mode.
23
Press the b (movie-record) button
to start movie recording.
Recording begins after the monitor turns off
briefly.
The camera focuses at the center of the
frame. Focus areas are not displayed during
recording.
When N HD 720p (1280×720) (default setting) is
changes to an aspect ratio of 16:9 with movie recording
(the area indicated at right is recorded).
The approximate remaining movie length is displayed
during recording.
10s
Recording stops automatically when the maximum movie
length has been recorded.
3
Press the b (movie-record) button again to end recording.
B Note on Saving Movies
After a movie has been recorded, it is not fully saved to the internal memory or memory card until
monitor display returns to the shooting display. Do not open the battery-chamber/memory card
slot cover before movies have been fully saved. Removing the memory card while movies are being
saved could result in loss of data or in damage to the camera or card.
123
Recording Movies
B Recording Movies
• Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording
Speed Class ratings are used.
• Digital zoom deteriorates picture quality. If digital zoom is not used when movie recording is
started and the zoom control is rotated continuously in the g direction, the zoom stops at the
maximum optical zoom ratio. Release the zoom control and rotate it again in the g direction to
trigger digital zoom. Digital zoom is canceled when movie recording is finished.
• In some cases, movie recordings may capture the sounds of the camera, such as the sounds
produced by the zoom control operation, the movement of the lens during auto focus or zoom,
the vibration reduction function, or the aperture control when the brightness changes.
Avoiding bright objects such as the sun, reflections of the sun, and electric lights when recording
movies is recommended.
• When recording or playing back movies, colored stripes (interference patterns or moiré) may
appear on subjects that have a regular, repeating grid, such as pattern of weave in cloths or
windows in a building, depending on the shooting distance or zoom ratio. This phenomenon
occurs when the subject’s pattern interferes with the camera sensor grid, and it does not indicate
a malfunction.
B Notes on Autofocus for Movie Recording
• When A Single AF (default setting) is selected for Movie AF mode in the setup menu, focus is
1. Set Movie AF mode in the setup menu to A Single AF (default setting) before starting movie
recording.
2. Frame a different subject (positioned at the same distance from the camera as the intended
subject) in the center of the frame, press the b (movie-record) button to start recording, and
then modify the composition.
C Functions Available with Movie Recording
• Current exposure compensation setting, white balance setting specified for A (auto) mode, and
the scene effect adjustment slider specified for scene mode setting are also applied with movie
recording. When macro mode is enabled, movies of subjects closer to the camera can be
recorded. Confirm settings before starting movie recording.
timer is enabled, the camera focuses after ten or tow seconds, and then the movie recording
starts.
• The flash will not fire.
• The Movie options, Movie light, or Movie AF mode setting can be made before starting movie
124
Recording Movies
Changing the Movie Recording Settings
The movie settings described below can be made. Apply the settings before
starting movie recording.
D
Movie options
Select the desired movie option for recording movies.
Movie light
m
n
Enable or disable the movie light when recording movies.
Movie AF mode
Choose how the camera focuses when recording movies.
D Movie Options
Select the desired movie option to record. Larger image sizes and faster movie
bitrates mean greater image quality and larger movie file sizes.
Option
Description
Movies with an aspect ratio of 16:9 are recorded in high
N HD 720p (1280×720)
(default setting)
definition. This option is suited to playback on a wide screen TV.
•
Image size: 1280 × 720 pixels
Movie bitrate: 9 Mbps
•
Movies with an aspect ratio of 4:3 are recorded.
y VGA (640 × 480)
•
•
Image size: 640 × 480 pixels
Movie bitrate: 3 Mbps
Movies with an aspect ratio of 4:3 are recorded.
z QVGA (320 × 240)
•
•
Image size: 320 × 240 pixels
Movie bitrate: 640 kbps
• The movie bit rate is the volume of movie data recorded per second. As a
variable bit rate (VBR) system has been adopted, the movie recording rate varies
automatically according to the subject so that more data is recorded per
second for movies containing frequently moving subjects, thus increasing
movie file size.
• The frame rate is approximately 30 frames per second in any options.
125
Recording Movies
C Movie Options and Maximum Movie Length
Internal memory
(approx.79 MB)
Memory card*
(4 GB)
Option
N HD 720p (1280×720)
(default setting)
1 min 4 s
55 min
y VGA (640 × 480)
z QVGA (320 × 240)
3 min
2 h 40 min
8 min 26 s
10 h 10 min
All figures are approximate. The maximum recording time may vary by make of memory card or
movie bit rate.
*
The maximum recording time for a single movie is 29 minutes. The maximum movie length
displayed during recording is 29 minutes, even when there is enough free space on the memory
card for a longer movie.
D More Information
m Movie Light
Tap z (Setup menu) M m Movie light
Enable or disable the movie light, which is used to illuminate dimly lit subjects
when recording movies.
On
Movie light will light during movie recording.
Off (default setting)
Movie light does not light.
126
Recording Movies
n Movie AF Mode
Tap z (Setup menu) M n Movie AF mode
Choose how the camera focuses with recording movies.
Option
Description
Focus is locked when the b (movie-record) button is pressed to
start recording.
Select this option when the distance between the camera and
the subject will remain fairly consistent.
A Single AF
(default setting)
Camera focuses continuously during movie recording.
Select this option when the distance between the camera and
the subject will change.
B Full-time AF
To prevent sound of camera focusing from interfering with
recording, use of Single AF is recommended.
127
Movie Playback
recognized by R icon. Tap R to play a movie.
15/11/2010 15:30
0010.MOV
To adjust the volume before playback, tap the bottom
tab to display the setting controls and tap i.
17s
Tap the monitor during playback to display the
During playback
playback control panel at the bottom in the monitor.
Tap a playback control to perform the corresponding
operation. The operations described below are
available.
9s
To
Use
Description
Volume
X
Tap X to adjust volume.
Rewind
O
P
Touch and hold O to rewind movie.
Touch and hold P to advance movie.
Tap Q to pause playback.
Advance
The following operations can be performed while playback is
paused.
Tap U to rewind movie one frame. Touch and hold U
for continuous rewinding.
U
Q
S
Pause
End
Tap V to advance movie one frame. Touch and hold V
for continuous advancing.
V
Tap R displayed at the center of the screen to resume
playback.
R
Tap S to end movie playback and return to full-frame playback
mode.
B Movie Playback
Movies recorded by a camera other than the COOLPIX S1100pj cannot be played back.
C Deleting Movie
128
Connecting to Televisions, Computers and Printers
Connecting to a TV
Connect the camera to a television using the supplied audio/video cable to play
back pictures full-frame or in a slide show, or to play back movies, on a television.
1
Turn off the camera.
2
Connect the camera to the TV using the supplied audio/video cable.
Connect the yellow plug to the video-in jack and the white plug to the audio-in jack on
the TV.
Yellow White
3
4
Tune the television to the video channel.
See the documentation provided with your television for details.
Hold down the c button to turn on the
camera.
The camera enters playback mode and pictures are
displayed on the television.
The camera monitor turns off when pictures are
displayed on the television.
129
Connecting to a TV
Operations with TV Connection
While pictures are displayed full-frame on the TV, the previous or subsequent
picture can be viewed by dragging your finger across the camera monitor.
If the first frame of a movie is displayed, the movie can be played back by tapping
the camera monitor.
• Tap the camera monitor to turn TV display off and display the picture in the
camera monitor. When pictures are displayed in the camera monitor, tap the
controls displayed to operate the camera.
• When the camera is connected to a TV, pictures cannot be displayed as
thumbnails, picture display cannot be enlarged (playback zoom), and pictures
cannot be cropped.
• Pictures will be automatically displayed on the TV in the following situations.
-
-
-
No operations are performed for a few seconds.
A slide show is played back.
A movie is played back.
B Connecting the Audio/Video Cable
When connecting the audio/video cable, be sure that the camera connector is properly oriented. Do
not use force when connecting the audio/video cable to the camera. When disconnecting the
audio/video cable, do not pull the connector at an angle.
B Video Mode
Be sure that the camera’s video mode setting conforms to the standard used by your television.
130
Connecting to a Computer
Use the supplied USB cable to connect the camera to a computer and copy
(transfer) images to the computer.
Before Connecting the Camera
Install the Software
Use the supplied ViewNX 2 CD and install the following software on the computer.
• ViewNX 2: Use the image transfer feature “Nikon Transfer 2” to save images that
were captured with the camera on the computer. Saved images can be viewed
and printed. Image and movie editing features are also supported.
• Panorama Maker 5: This software can join a series of images to create a single
panorama image.
For more information on installing the software, refer to the Quick Start Guide.
Compatible Operating Systems
Windows
Windows 7 Home Basic/Home Premium/Professional/Enterprise/Ultimate,
Windows Vista Home Basic/Home Premium/Business/Enterprise/Ultimate (Service
Pack 2), or Windows XP Home Edition/Professional (Service Pack 3)
Macintosh
Mac OS X (version 10.4.11, 10.5.8, 10.6.4)
For information on the requirements for playing back high-definition movies, refer
Refer to the Nikon website for the latest information on operating system
compatibility.
B Notes on Power Source
• When connecting the camera to a computer to transfer images, use a fully charged battery to
prevent the camera from turning off unexpectedly.
powered from an electrical outlet. Do not use any other make or model of AC adapter as they may
cause the camera to overheat or malfunction.
131
Connecting to a Computer
Transferring Images from a Camera to a Computer
When transferring images to the computer from the camera, select the Interface
• The default setting is MTP/PTP.
1
2
3
Start the computer to which ViewNX 2 was installed.
Be sure that the camera is off.
Connect the camera to the computer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
.
4
Turn on the camera.
The power-on lamp will light. The camera monitor will
remain off.
B Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.
132
Connecting to a Computer
5
Start the ViewNX 2 image transfer feature “Nikon Transfer 2” installed
on the computer.
•
Windows 7
When the Devices and Printers K S1100pj screen is displayed, click Change
program under Import pictures and videos. Select Import File using Nikon
Transfer 2 in the Change program dialog and click OK.
Double-click Import File on the Devices and Printers K S1100pj screen.
•
•
Windows Vista
When the AutoPlay dialog is displayed, click Import File using Nikon Transfer 2.
Windows XP
When the action selection dialog is displayed, select Nikon Transfer 2 Import File,
and click OK.
•
Mac OS X
Nikon Transfer 2 will start automatically when the camera is connected to the
computer if Yes was selected in the Auto-Launch setting dialog when Nikon
Transfer 2 was first installed.
•
If there are a large number of images on the memory card, it may take some time for
Nikon Transfer 2 to start.
6
Confirm that the source device is displayed in the transfer options
Source panel and click Start Transfer.
Source device
Start Transfer button
Any images that have not been transferred to the computer will be transferred (default
setting of ViewNX 2).
133
Connecting to a Computer
ViewNX 2 starts automatically when the transfer is complete (default setting of ViewNX
2). Transferred images can be viewed.
For more information on using ViewNX 2, refer to the ViewNX 2 help information
Disconnecting the Camera
Do not turn off the camera or disconnect the camera from the computer during
transfer.
When transfer is complete, turn off the camera and disconnect the USB cable.
134
Connecting to a Computer
C Transferring Images Using a Computer’s Card Slot or a Commercially-
available Card Reader
When the memory card is inserted into a computer’s card slot or into a commercially-available card
reader, the images can be transferred using “Nikon Transfer 2”, the image transfer feature of ViewNX 2.
• Make sure that the memory card being used is supported by the card reader or other card reading
device.
• To transfer images, insert the memory card into the card reader or card slot and follow the
• To transfer images saved in the camera’s internal memory, the images must first be copied to a
D Starting ViewNX 2 or Nikon Transfer 2 Manually
Windows
Choose Start menu > All Programs > ViewNX 2 > ViewNX 2.
Double-clicking the ViewNX 2 shortcut icon on the desktop will also start ViewNX 2.
Mac OS X
Open the Applications folder, open the Nikon Software > ViewNX 2 folders in that order, and
then double-click the ViewNX 2 icon. Clicking the ViewNX 2 icon on the Dock will also start
ViewNX 2.
Click Transfer in the ViewNX 2 screen to start Nikon Transfer 2.
D Viewing ViewNX 2 Help Information
For more information on ViewNX 2 or Nikon Transfer 2, start ViewNX 2 or Nikon Transfer 2 and select
ViewNX 2 Help from the Help menu.
D Panorama Creation with Panorama Maker 5
panorama photo with Panorama Maker 5.
• Panorama Maker 5 can be installed on a computer using the supplied ViewNX 2 CD.
• After installation is complete, follow the procedure described below to start Panorama Maker 5.
Windows
Choose Start menu>All Programs>ArcSoft Panorama Maker 5>Panorama Maker 5.
Mac OS X
Open Applications and double-click the Panorama Maker 5 icon.
• For more information on using Panorama Maker 5, refer to the on-screen instructions and help
information contained in Panorama Maker 5.
D Image File Names and Folder Names
135
Connecting to a Printer
to the printer and print pictures without using a computer. Follow the procedures
below to print pictures.
Take pictures
Select pictures for printing and
number of copies using Print
Print pictures one at a
When printing is complete, turn the camera off and disconnect USB cable
B Note on Power Source
When connecting the camera to a printer, use a fully charged battery to prevent the camera from
turning off unexpectedly.
If the AC Adapter EH-62F (available separately) is used, COOLPIX S1100pj can be powered from an
electrical outlet. Do not use any other make or model of AC adapter as they may cause the camera to
overheat or malfunction.
D Printing Pictures
In addition to printing pictures transferred to a computer from your personal printer and printing
over a direct camera-to-printer connection, the following options are also available for printing
pictures:
• Inserting a memory card into a DPOF-compatible printer’s card slot
• Taking a memory card to a digital photo lab
For printing using these methods, specify the pictures and the number of prints each to the memory
136
Connecting to a Printer
Connecting the Camera to a Printer
When transferring images to the computer from the camera, select the Interface
• The default setting is MTP/PTP.
1
Turn off the camera.
2
3
Turn on the printer.
Check printer settings.
Connect the camera to the printer using the supplied USB cable.
4
Turn on the camera.
When properly connected, the PictBridge startup screen
(
) will be displayed in the camera monitor, followed by
1
the Print selection screen ( ).
2
1
2
Print selection
15 11 2010
4
4
B Connecting the USB Cable
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and
do not use force when connecting or disconnecting the USB cable.
137
Connecting to a Printer
Printing Pictures One at a Time
procedure described below to print a picture.
1
Tap B or C to choose the desired picture and
tap I.
Print selection
15 11 2010
4
4
Previous or subsequent picture can also be viewed by
tapping the scroll bar.
Tap o or rotate the zoom control to f (h) to switch to
9-thumbnail display. Tap n or rotate the zoom control to
g (i) to switch back to full-frame playback.
2
3
4
Tap Copies.
PictBridge
Start print
Copies
Paper size
Tap the desired number of copies (up to nine).
Copies
1
4
7
2
5
8
3
6
9
Tap Paper size.
PictBridge
Start print
Copies
Paper size
138
Connecting to a Printer
5
6
7
Tap the desired paper size.
Paper size
Default
Tap B or C to display additional options.
To specify paper size using printer settings, choose
Default in the paper size menu.
3.5×5 in.
5×7 in.
Postcard
Tap Start print.
PictBridge
Start print
Copies
Paper size
Printing begins.
Monitor display returns to the print selection screen
shown in step 1 when printing is complete.
Printing
002
/
004
To cancel printing before all copies have been printed,
tap J.
Current number of copies/
total number of prints
Printing Multiple Pictures
procedure described below to print multiple pictures.
1
When the Print selection screen is displayed,
tap F.
Print selection
15/11/2010
4
4
The Print menu screen is displayed.
2
Tap Paper size.
Print menu
To exit the print menu, tap J.
Print selection
Print all images
DPOF printing
Paper size
139
Connecting to a Printer
3
Tap the desired paper size.
Paper size
Default
Tap B or C to display additional options.
To specify paper size using printer settings, choose
Default in the paper size option.
3.5×5 in.
5×7 in.
Postcard
4
Tap Print selection, Print all images, or
DPOF printing.
Print menu
Print selection
Print all images
DPOF printing
Paper size
Print selection
Choose pictures (up to 99) and the number of
copies (up to nine) of each.
Print selection
1
•
Tap the desired picture and tap A or B at
the upper left in the monitor to specify the
number of copies to be printed.
×
×
1
1
×
1
•
Pictures selected for printing can be
recognized by the check mark (y) and the
numeral indicating the number of copies to
be printed. If no copies have been specified
for pictures, the selection is canceled.
•
Tap n or rotate the zoom control to g (i) to switch to full-frame playback.
Tap o or rotate the zoom control to f (h) to switch back to 9-thumbnail
display.
•
•
•
Tap
Tap
to cancel the selection of all pictures.
when setting is complete.
n
I
When the screen shown at right is displayed,
tap Start print to start printing. Tap J to
return to the print menu.
Print selection
009 prints
Start print
Cancel
140
Connecting to a Printer
Print all images
One copy each of all pictures stored in the internal memory, or on the memory
card, is printed.
•
When the screen shown at right is displayed,
tap Start print to start printing. Tap J to
return to the print menu.
Print all images
009 prints
Start print
Cancel
DPOF printing
Print pictures for which a print order was
DPOF printing
•
When the screen shown at right is displayed,
010 prints
tap Start print to start printing. Tap
to
J
return to the print menu.
Start print
View images
•
To view the current print order, tap View
images. To print pictures, tap I.
View images
×
×
1
1
×
1
5
Printing begins.
Monitor display returns to the print menu (step 2) when
printing is complete.
Printing
002 004
/
To cancel printing before all copies have been printed, tap
J.
Current number of copies/
total number of prints
C Paper Size
The camera supports the following paper sizes: Default (the default paper size for the printer
connected to the camera), 3.5×5 in., 5×7 in., 100×150 mm, 4×6 in., 8×10 in., Letter, A3, and A4.
Only sizes supported by the printer will be displayed. To specify paper size using printer settings,
choose Default in the paper size option.
141
Basic Camera Setup
Setup Menu
The setup menu contains the following options.
c
d
e
Welcome screen
Choose whether or not a welcome screen is displayed when camera is turned on.
Date
Set camera clock and choose home and destination time zones.
Monitor settings
Set the photo information displayed in playback mode, the image review settings,
and the monitor brightness.
f
Date imprint
Imprint shooting date and time on pictures.
Vibration reduction
g
h
m
u
n
i
k
Choose whether or not vibration reduction is enabled.
AF assist
Enable or disable AF-assist illuminator.
Movie light
Enable or disable movie light during recording movies.
Digital zoom
Enable or disable digital zoom.
Movie AF mode
Select how the camera focuses in movie mode.
Sound settings
Adjust sound settings.
Auto off
Set time before the monitor turns off for saving power.
l / m Format memory/Format card
Format internal memory or memory card.
n
J
d
Language
Choose the language used for camera monitor display.
Interface
Adjust settings necessary for connection to computer or television.
Blink warning
Specify whether or not the camera detects human subjects that have blinked with
shooting using the face detection function.
142
Setup Menu
p
Reset all
Restore camera settings to default values.
Copy
h
r
Copy files between memory card and internal memory.
Firmware version
Display camera firmware version.
Operating the Setup Menu
1
2
3
Tap the bottom tab in shooting or playback
mode.
23
Tap the z tab.
The setup menu is displayed.
OFF
0.0
Tap the desired option.
Tap B or C to display previous or subsequent page.
Tap J to return to the previous screen.
Set up
Welcome
screen
Date
When I is displayed in a screen, tap I to apply the
setting.
Monitor
settings
Date imprint
AF assist
To exit the setup menu, tap J or press the shutter-
release button (when shooting).
Vibration
reduction
143
Setup Menu
c Welcome Screen
Choose whether or not a welcome screen is displayed when the camera is turned
on.
None (default setting)
The camera enters shooting or playback mode without displaying the welcome
screen.
COOLPIX
The camera displays a welcome screen and enters shooting or playback mode.
Select an image
Displays a picture selected for the welcome screen.
When the Select image screen is displayed, select a
Select image
picture and tap I.
•
In the Select image screen, tap n or rotate the
zoom control to g (i) to switch to full-frame
playback and tap o or rotate the zoom control to
f (h) to switch back to 9-thumbnail display.
•
•
As the selected picture is stored by the camera, it
will be displayed when the camera is turned on
even if the original picture is deleted.
144
Setup Menu
d Date
Set the camera clock.
Date
Set camera clock to current date and time.
Tap the items on the displayed screen to select the
display order of the day, month and year, and set the
date and time.
Date
MDY
YMD
DMY
•
•
•
Select the item: tap the desired item.
Edit the highlighted item: tap A or B.
:
01
01 2010 00 00
Time zone
w Home time zone can be specified and daylight saving is enabled or disabled
from Time zone options. When the destination time zone (x) is selected, local
region are recorded with pictures. Useful when traveling.
Selecting Travel Destination Time Zone
1
Tap Time zone.
Date
15/11/2010 15:30
The Time zone menu is displayed.
Date
Time zone
2
Tap x Travel destination.
Time zone
15/11/2010 15:30
The date and time displayed in the monitor changes
according to the region currently selected.
London, Casablanca
Home time
zone
Travel
destination
145
Setup Menu
3
Tap o.
Time zone
15/11/2010 15:30
The time zone selection screen is displayed.
London, Casablanca
Home time
zone
Travel
destination
4
Tap E or F to choose the travel destination
time zone and tap I.
Travel destination
:
-04 00
:
11 30
EDT:
If daylight saving time is in effect, tap p to enable
daylight saving time function. W is displayed at the top
of the monitor and the camera clock is advanced one
hour. Tap p again to disable the daylight saving time
function.
New York
Toronto
Lima
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
B Note on the Clock Battery
The camera clock is powered by the clock battery. The clock battery charges when the main battery
is inserted or an AC adapter is connected, and can provide several days of backup power after about
ten hours of charging.
C w Home Time Zone
• To switch to the home time zone, tap w Home time zone in step 2.
• To change the home time zone, tap w Home time zone in step 2 and complete steps 3 and 4.
C Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time option on or off from the
time zone selection screen displayed in step 4.
D Imprinting Date on Pictures
time have been set. When the Date imprint option is enabled, pictures will be recorded with
shooting date imprinted on them.
146
Setup Menu
D Time Zones
The camera supports the time zones listed below.
For time zones not listed below, set the camera clock to local time from the Date option.
UTC +/–
–11
Location
Midway, Samoa
UTC +/–
+1
Location
Madrid, Paris, Berlin
–10
Hawaii, Tahiti
+2
Athens, Helsinki, Ankara
Moscow, Nairobi, Riyadh,
Kuwait, Manama
–9
Alaska, Anchorage
+3
PST (PDT): Los Angeles, Seattle,
Vancouver
–8
–7
–6
+4
+5
Abu Dhabi, Dubai
Islamabad, Karachi
New Delhi
MST (MDT): Denver, Phoenix
CST (CDT): Chicago, Houston,
Mexico City
+5.5
EST (EDT): New York, Toronto,
Lima
–5
+6
Colombo, Dhaka
–4.5
–4
–3
–2
–1
0
Caracas
+7
+8
Bangkok, Jakarta
Beijing, Hong Kong, Singapore
Tokyo, Seoul
Manaus
Buenos Aires, Sao Paulo
Fernando de Noronha
Azores
+9
+10
+11
+12
Sydney, Guam
New Caledonia
London, Casablanca
Auckland, Fiji
147
Setup Menu
e Monitor Settings
Set the options below.
Playback
Set the photo information displayed in the monitor during playback.
•
Show info:
15/11/2010 15:30
0004. JPG
4
4
•
Auto info (default setting): Current settings and operational guides are
displayed as in Show info above. If no operations are performed for a few
seconds, information is hidden. Information will be displayed again when the
next operation is performed.
Image review
•
On (default setting): Picture is automatically displayed in the monitor
immediately after it is taken and the monitor display returns to shooting
mode.
•
Off: Picture is not displayed after it is taken.
Brightness
Choose from five settings for monitor brightness. The default setting is 3.
148
Setup Menu
f Date Imprint (Imprinting Date and Time)
The shooting date and time can be imprinted on the
pictures with shooting, allowing the information to be
printed even from printers that do not support date
15.11.2010
f
Date
Date is imprinted on pictures.
Date and time
S
Date and time are imprinted on pictures.
Off (default setting)
Date and time are not imprinted on pictures.
At settings other than Off the icon for the current setting is displayed in the
B Notes on Date Imprint
• Imprinted dates form a permanent part of image data and cannot be deleted. The date and time
cannot be imprinted on pictures after they have been taken.
• The date is not imprinted in the following situations:
- Pictures taken in Sports, Museum, or Panorama assist scene mode
- Movies
Choose an Image mode setting of N 1024×768 or larger when using date imprint.
C Date Imprint and Print Set
When printing from DPOF-compatible printers that support the printing of shooting date and photo
information, the date and information can be printed without imprinting this information on them,
149
Setup Menu
g Vibration Reduction
Choose a vibration reduction option for shooting.
Vibration reduction reduces blur caused by slight hand movement known as
camera shake, which commonly occurs when shooting with telephoto zoom
applied or at slow shutter speeds. The effects of camera shake are reduced when
recording movies, in addition to when taking still pictures.
Set Vibration reduction to Off when using a tripod to stabilize the camera
during shooting.
On (hybrid)
The effects of camera shake are reduced optically using a lens-shift method.
Additional image processing with electronic vibration reduction is applied to
further reduce the effects of camera shake with recording of still pictures taken
under the following conditions.
•
•
•
•
•
When the flash does not fire
When a shutter speed slower than 1/60 seconds is used
When Self-timer is disabled
When Continuous is set to Single
When ISO sensitivity is set to 200 or less
On (default setting)
The vibration reduction using the lens-shift method only is enabled.
Off
Vibration reduction is not enabled.
The current vibration reduction setting can be confirmed in the camera monitor
150
Setup Menu
B Notes on Vibration Reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the image of the monitor stabilizes before
shooting.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may be displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• Image processing with electronic vibration reduction may not perform as expected with very
slight or extreme camera shake, even when On (hybrid) is selected.
• Image processing with electronic vibration reduction is not enabled at fast or extremely slow
shutter speeds, even when On (hybrid) is selected.
simultaneously. When taking pictures with the setting of On (hybrid) for Vibration reduction,
Date imprint is set to Off.
• When On (hybrid) is selected and electronic vibration reduction is activated, the shutter is
automatically released twice when a picture is taken to allow for image processing. Therefore, the
shutter is released the first time and a single picture will be recorded.
h AF Assist
Enable or disable AF-assist illumination, which assists autofocus operation when
the subject is dimly lit.
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
dimly lit. The illuminator has a range of about 3.5 m (11 ft.) at the maximum wide-
angle position and about 2.0 m (6 ft. 6 in.) at the maximum telephoto position.
Note that for some scene modes or focus areas, AF-assist illuminator may not light.
Off
AF-assist illuminator does not light. The camera may be unable to focus under dim
lighting.
151
Setup Menu
u Digital Zoom
Enable or disable digital zoom.
On (default setting)
When the camera is zoomed in to the maximum optical zoom position, rotating the
Off
Digital zoom will not be activated (except during recording movies).
B Notes on Digital Zoom
• When digital zoom is in effect, the camera focuses at the center of the frame.
• Digital zoom cannot be used in the following situations.
-
Subject tracking is selected for the touch shooting setting
- When Portrait or Night portrait scene mode is selected
- When smart portrait mode is selected
i Sound Settings
Adjust the following sound settings.
Button sound
Select On (default setting) or Off.
When On is selected, a beep will sound once when operations are completed
successfully, twice when the camera acquires focus on the subject, and three times
when an error is detected. Start-up sound will also play when the camera is turned
on.
Shutter sound
Select On (default setting) or Off.
No sound is played with shutter release when some features such as continuous
shooting or BSS (best shot selector) are enabled, or when recording movies, even if
On is selected.
152
Setup Menu
k Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
In this option, set the time allowed to elapse before the camera enters standby
mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.
C When the Monitor Turns off for the Power Saving Function
• Power-on lamp blinks in standby mode.
• Camera turns off after three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:
- The power switch, shutter-release button, A button, or b (movie-record) button
C Auto Off Settings
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• When a setting screen, mode selection menu, or setup menu is displayed: three minutes
• During slide show playback: up to 30 minutes
• When the AC adapter EH-62F is connected: 30 minutes
C Auto Off in Projector Mode
projector mode.
153
Setup Menu
l/m Format Memory/Format Card
l Format memory/m Format card
Use this option to format the internal memory or a memory card.
l Formatting the Internal Memory
Format memory
To format the internal memory, remove the memory
card from the camera.
All images will
be deleted! OK?
The Format memory option is displayed in the setup
menu.
Yes
No
m Formatting a Memory Card
Format card
When a memory card is inserted in the camera, the
Format card option is displayed in the setup menu.
All images will
be deleted! OK?
Yes
No
B Formatting Internal Memory and Memory Cards
• Formatting the internal memory or memory cards permanently deletes all data. Be sure
to transfer important pictures to a computer before formatting.
default setting (displayed as number).
• Do not turn the camera off or open the battery-chamber/memory card slot cover during
formatting.
• Be sure to use this camera to format memory cards previously used in other devices the first time
they are inserted into the COOLPIX S1100pj.
154
Setup Menu
n Language
Choose one of 24 languages for display of camera menus and messages.
Czech
Polish
Danish
Portuguese
Russian
German
(default setting)
Spanish
Greek
Finnish
Swedish
Turkish
French
Simplified Chinese
Traditional Chinese
Japanese
Korean
Indonesian
Italian
Hungarian
Dutch
Thai
Norwegian
Arabic
J Interface
Adjust settings for connection to a computer or television.
USB
Select the communication method used when the camera is connected to a
computer or printer.
•
MTP/PTP (default setting): Select when transferring pictures from the camera to
Projector: Select when using the built-in projector to project the computer
display.
•
Video mode
Adjust video mode settings for connection to a television. Select from NTSC and
PAL.
155
Setup Menu
d Blink Warning
Specify whether or not the camera detects human subjects that have blinked
•
On
When the camera detects that one or more human subjects may have blinked in a
picture taken using the face detection function, the blink warning screen is
displayed in the monitor.
The face of the human subject that may have blinked when the shutter was
released is framed by a yellow border. Should this occur, check the picture and
determine whether or not another picture should be taken.
Off (default setting)
Blink warning is not enabled.
156
Setup Menu
Operating the Blink Warning Screen
When the blink warning screen shown at right is
displayed in the monitor, the operations described
below are available.
Did someone blink?
If no operations are performed within a few seconds,
the camera automatically returns to shooting mode.
To
Use
Description
Rotate the zoom control to g (i).
Enlarge the detected
face that blinked
If the camera detects that more than one human
subject blinked, tap M or N to switch display to
another face.
g (i)
Switch to full-frame
playback
f (h)
Rotate the zoom control to f (h).
Delete the picture
E
I
Tap E.
Tap the monitor, I, or H. The shutter-release
button can also be pressed to return to shooting
mode.
Switch to shooting
mode
H
B Note on Blink Warning
The blink warning does not function at continuous settings of Continuous, BSS, or Multi-shot 16.
157
Setup Menu
p Reset All
When Reset is selected, the camera’s settings will be restored to their default
values.
Basic Shooting Functions
Option
Default value
Auto
Off
R 4320×3240
N HD 720p (1280×720)
Touch shutter
0
Auto Mode Shooting Mode
Option
Default value
Off
Auto
Single
Auto
Scene Mode
Option
Default value
Center
Smart portrait Mode
Option
Default value
Normal
Off
On
158
Setup Menu
Playback Mode
Option
Default value
Classic
Setup Menu
Option
Default value
None
Auto info
On
3
Off
On
Auto
Off
On
Single AF
On
On
1 min
Off
Slide Show Settings in Projector Mode
Option
Default value
Classic
3 s
None
Medium
159
Setup Menu
Projector Settings Menu
Option
Default value
Off
5 min
On
Others
Option
Default value
Default
Numbering will continue from the lowest number available. To reset file
numbering to “0001”, delete all pictures stored in the internal memory or on the
• The following menu settings will remain unaffected when menus are reset with
Reset all.
160
Setup Menu
h Copy (Copy Between Internal Memory and Memory
Card)
Copy pictures between the internal memory and a memory card.
1
2
3
Tap the desired option from the copy screen.
Copy
q: Copy pictures from internal memory to memory
card.
r: Copy pictures from memory card to internal
memory.
Tap the desired copy option.
Camera to card
Selected images: Copy pictures selected. Proceed to
step 3.
Selected
images
All images
All images: Copy all pictures. When a confirmation
dialog is displayed, tap Yes. Pictures are copied. To return
to the setup menu without copying, tap No.
Tap the pictures to be copied.
Copy
When a picture is selected, a check mark is displayed. To
cancel the selection, tap the picture again. A check mark
is removed.
Tap n or rotate the zoom control to g (i) to switch to
full-frame playback and tap o or rotate the zoom control
to f (h) to switch back to 9-thumbnail display.
4
Tap I.
Copy
When a confirmation dialog is displayed, tap Yes. Pictures
are copied. To return to the setup menu without copying,
tap No.
161
Setup Menu
B Notes on Copying Pictures
• JPEG-, MOV-, and WAV-format files can be copied. Files recorded in any other format cannot be
copied.
with the pictures.
• Operation is not guaranteed with pictures taken with another make of camera or that have been
modified on a computer.
• Pictures or movies copied from the internal memory to a memory card, or vice versa, cannot be
same albums as the original pictures.
C “Memory contains no images.” Message
If there are no pictures stored on a memory card inserted in the camera when playback mode is
applied, the message Memory contains no images. will be displayed. Perform the followings to
copy pictures in the internal memory to a memory card.
1. Tap the bottom tab to display the setting controls and tap z.
2. Tap Copy in the displayed setup menu.
D More Information
r Firmware Version
View the current camera firmware version.
COOLPIX S1100pj Ver.x . x
162
Using the projector
Displaying Pictures with the Projector (Projector Mode)
The COOLPIX S1100pj is equipped with a
built-in projector. The ability to project
pictures and movies with simple operation
makes for a convenient way of enjoying
photos at gatherings of family and friends.
Projecting Pictures
1
Place the camera.
Place the camera on a stable and level surface such as a table.
Point the projector window at a screen (available commercially) or flat white surface.
The projection distance between the camera and screen should be approximately
2
Turn on the camera and press the P
button.
The camera enters projector mode and a
picture stored in the internal memory or on a
memory card inserted into the camera is
projected in full-frame playback mode.
The camera can also be switched to projector
mode by pressing the P button on the remote control. The camera’s monitor turns off
when the remote control is in operation. Tap the monitor to reactivate it and enable the
3
4
Adjust the camera position.
To change the projected picture size, adjust the distance between the camera and
screen.
Adjust the projection angle to reduce picture distortion.
Adjust focus for the projected
picture.
Turn off unnecessary lights.
Rotate the projector focus dial to adjust picture
focus.
163
Displaying Pictures with the Projector (Projector Mode)
5
Switch the picture with the remote control (supplied).
Infrared emitter
Infrared receiver
Display the previous picture
Display the next picture
control.
6
Press the P button on the remote control to end projection.
Projection also ends if the P button or A button on the camera is pressed to switch
to shooting mode.
B Notes on Using the Projector
• Be aware that the camera and battery will become hot in projector mode. Allow the camera to
cool before using it again when the projector has been used for an extended period of time.
• When the battery is low, the camera automatically adjusts projection brightness to save power.
164
Displaying Pictures with the Projector (Projector Mode)
C Built-in Projector Stand
• The built-in projector stand allows the camera to be tilted slightly upward so that the projected
picture is not obstructed by the surface of the table on which the camera is placed.
• Slide the projector stand latch ( ) and push ( ) to
1
2
raise it. To lower the projector stand, slide the
projector stand latch ( ) and push ( ) it into the
3
4
camera.
• When the projector stand is used, the picture is
projected onto the screen at an angle, resulting in a
type of distortion known as the keystone effect. Using
a tripod instead of the built-in projector stand makes it
easier to properly align the camera with the screen,
reducing the keystone effect.
C Auto Power Off with Projection
When no operations are performed during projection, the camera ends projection to save power
and enter standby mode, and the power-on lamp blinks. If another three minutes passes in standby
mode, the camera turns off.
• While the power-on lamp is blinking, press the buttons indicated below to reactivate the monitor
in shooting or playback mode.
- Playback mode: power switch, shutter-release button, or c button
- Shooting mode: A button
• To resume projection, press the P button again in playback mode or shooting mode.
• The time allowed to pass before the camera enters standby mode when no operations are
C Projection Distance and Projected Picture Size
Projection distance
Projected picture size
26 cm (10 in.)
Approx. 10 × 7.5 cm (4 × 3 in.; equivalent to 5-inch display)
Approx. 20 × 15 cm (8 × 6 in.; equivalent to 10-inch display)
Approx. 40 × 30 cm (16 × 12 in.; equivalent to 20-inch display)
Approx. 60 × 45 cm (24 × 18 in.; equivalent to 30-inch display)
Approx. 94 × 70 cm (37 × 28 in.; equivalent to 47-inch display)
50 cm (1 ft. 7 in.)
1.0 m (3 ft. 3 in.)
1.5 m (4 ft. 11 in.)
2.4 m (7 ft. 10 in.)
165
Displaying Pictures with the Projector (Projector Mode)
Using Projector Mode
While a picture is displayed full-frame in projector mode, the following operations
To
Use
Description
A
Press the H, I, J, or K button on the
remote control.
Display the
previous or
subsequent
picture
Press and hold the H, I, J, or K button for
continuous frame-by-frame rewinding or
advancing.
Previous or subsequent pictures can also be
viewed by dragging the picture on the
camera’s monitor.
Zoom in to a maximum of 10×.
Press the apply selection button on the
remote control or tap H on the camera’s
monitor to return to full-frame playback mode.
In projector mode, pictures enlarged with
Playback zoom
g (i)
Display 9 picture thumbnails.
Press the H, I, J, or K button on the
remote control to select a picture.
Press the apply selection button on the
remote control or tap the picture displayed on
the camera’s monitor.
View thumbnails
f (h)
Movies are displayed with the R indicator.
Press the apply selection button on the
remote control or tap R on the camera’s
monitor to start playback.
Playback movies
Start slide show
R
Press the b button on the remote control.
When the bottom tab on the camera’s
monitor is tapped to display the setting
b
controls, and
is tapped, the playback
b
settings for the slide show can be made.
Tap the bottom tab on the monitor of the
camera to display the setting controls, and
Paint, Glamour retouch, or Slide show
option can be enabled.
Apply projection
settings
Bottom tab
166
Displaying Pictures with the Projector (Projector Mode)
To
Use
Description
A
Set the picture
rating/play back
pictures by rating
Right tab
(P)
Apply a rating of one to five to each picture or
play back pictures by rating.
Press the c button to display the playback-
Switch to another
playback mode
c
mode selection menu and switch to favorite
(camera only) pictures mode, auto sort mode, or list by date
mode.
Press the P button to return to shooting or
playback mode.
P
End projection
A
Press the A button to switch to shooting
(camera only) mode.
Projecting Movies
In projector mode, movies are indicated by R in full-frame playback mode. Press
the apply selection button on the remote control or tap R on the camera’s
monitor to play back movies.
playing back movies. Following operations can be performed using the remote
control.
To
Use
Description
Rewind or
advance
J or K
Touch and hold to rewind or advance movies.
Apply
selection
button
Press the apply selection button to pause playback.
Following operations can be performed using the
remote control while playback is posed.
Touch and hold J to rewind movie
continuously.
J
Pause
Touch and hold K to advance movie
continuously.
K
Apply
selection
playback.
button
Press the apply selection button to resume
Adjust volume
End projection
g (+)/f (–) Adjust the volume of movie sound.
Switches to full-frame playback mode.
b
167
Changing the Projecting Settings
When the tab is tapped in projector mode and the setting controls are displayed,
pictures can be decorated with the paint option and projected as a slide show
with effects.
• Tap the icon of the desired item to display the setting screen for that item.
• Tap the tab again to hide the setting controls.
15/11/2010 15:30
0004. JPG
4
4
1 2 3
4
1
U Paint
Draw on and decorate projected pictures in the same manner as when editing
pictures in playback mode. It is also possible to crop the projected picture. Use
,
I
,
,
, or
tools to paint pictures. Painted copies can be stored as separate
J K L
H
The (crop projected area) setting can be selected
•
H
Crop projected area
when drawing on or decorating pictures in
projector mode. Drag your finger across the camera
monitor to select the area to crop. The area outside
of the enclosed area becomes black.
2
j Glamour retouch
Glamour retouch can be used to soften the skin tone of faces detected in a picture
and make the faces look smaller with larger eyes in the same manner as when editing
3
4
b Slide show
Project pictures stored in the internal memory or on the memory card as an
automated slide show.
z Projector settings
The basic settings for the projector can be made.
B Notes on Slide Show
168
Changing the Projecting Settings
b Projector Slide Show
P button (projector mode) M Tap the bottom tab M b Slide show
Project pictures stored in the internal memory or on the memory card as an
automated slide show.
1
Check the camera position and focus with the
standby screen.
Slide show
4
4
to adjust camera position and focus.
Tap w (View selected images) on the monitor to select
and play back the pictures as a slide show in projector
Tap x (Effects), y (Frame intvl), z (Background music), or X (volume) to change
To repeat slide show automatically, tap m (loop playback).
2
3
Press the b button on the remote control.
When the b button on the remote control is pressed without
displaying the standby screen in step 1, the slide show begins with the
previously made settings.
The operations described in step 3 to 4 can also be performed with the
operation controls on the camera’s monitor or the g and f zoom
controls.
The slide show begins.
While the slide show is in progress, press the K button on
the remote control to display the next picture or the J
button to display the previous picture. Hold down the
buttons to advance or rewind the slide show.
Press the apply selection button to pause the slide show,
or press the b button to end it.
During a slide show with Background music, the volume can be adjusted with the
g (+) or f (–) button.
4
End or resume the slide show.
When the slide show ends or is paused, press the b button to return to the screen
shown in step 1. Press the apply selection button to resume the slide show.
169
Changing the Projecting Settings
Selecting Pictures for Slide Show and Projecting
1
2
3
Tap w (View selected images) under step 1 in
Slide show
4
4
Tap On.
View selected images
Select images screen is displayed.
On
Off
List
Select pictures to be projected in the
thumbnails at the bottom of the screen and
Select images
1
10
To delete the picture from the list, drag and drop the
picture to the thumbnails area.
To change the order of the pictures displayed, first delete
the pictures from the list, and then drag and drop them
back into the list in the desired order.
Thumbnails
Tap n to cancel the selection of all pictures.
4
Drag and drop all pictures to play back to the
Select images
list, and tap
.
I
4
10
The list is saved and the screen returns to the standby
screen.
Only a single list can be saved. To change the picture
selection, perform the procedure from step 1 and reselect
the pictures in step 3.
To cancel the slide show of selected images, tap Off in step 2.
Created list is stored in the camera’s memory even after the camera is turned off.
B Notes on View Selected Images
• Up to 200 pictures can be added to the list.
• An individual picture cannot be added to the list twice.
170
Changing the Projecting Settings
Slide Show Options
Tap x (Effects), y (Frame intvl), z (Background music), or X (Volume) in the
x Effects
Select from Classic (default setting), Animated, Zoom, or Pop art.
y Frame intvl
Specify the length of time a picture is displayed.
Default setting is 3 s.
When Manual advance only is selected, the displayed pictures do not advance
automatically. Change the displayed picture by pressing the J or K button on the
remote control or by dragging the images on the camera’s monitor. Use this setting
to manually switch the pictures in slide shows using transition effects or
background music.
z Background music
Select from Up-tempo, Moderate tempo, Slow tempo, and None (default
setting).
X Volume
Tap the volume icon to adjust the volume of the background music.
171
Changing the Projector Settings (Projector Settings Menu)
settings can be adjusted from the projector settings menu.
Operating the Projector Settings Menu
1
2
3
Tap the bottom tab in projector mode.
15/11/2010 15:30
0004. JPG
4
4
Tap z.
Projector settings menu is displayed on the camera’s
monitor.
Tap the desired menu to set.
Projector settings
Tap J to return to previous screen.
Power
saving
Auto off
In the screen with I, tap I to apply the setting.
To exit from the projector settings menu, tap J.
--
Tone com-
pensation
z Power Saving
P button (projector mode) M Tap the bottom tab M z (Projector settings menu) M
z Power saving
This option offers automatic adjustment of projection brightness to save power.
On
Enable power saving mode. Projection may appear slightly darker than when Off is
selected.
Off (default setting)
Power saving mode is disabled. When the battery is low, the camera automatically
adjusts projection brightness to save power even when Off is selected.
172
Changing the Projector Settings (Projector Settings Menu)
k Auto Off
P button (projector mode) M Tap the bottom tab M z (Projector settings menu) M
k Auto off
If no operations are performed for a while during projection, camera ends
In this option, set the time allowed to elapse before the camera enters standby
mode.
30 s, 1 min, 5 min (default setting), and 30 min can be selected.
C Canceling Standby Mode
• When the camera enters standby mode from projector mode, press the power switch, shutter-
release button or c button to activate playback mode.
• Press the A button to activate shooting mode.
• To resume projection, press the P button again in playback mode or shooting mode.
C Notes on Auto Off
The time allowed to pass before the camera enters standby mode is fixed as follows:
• During slide show playback with the loop option enabled: 30 minutes
• When a setting screen or the projector settings menu is displayed: three minutes
Tone Compensation
P button (projector mode) M Tap the bottom tab M z (Projector settings menu) M
Tone compensation
Dark portions of pictures are brightened when projected.
On (default setting)
Dark portions of pictures are brightened when projected. The results of tone
compensation vary depending on the picture.
Off
Tone compensation is disabled.
173
Tips: Projecting PowerPoint Presentations with
the Camera Alone
Save Microsoft PowerPoint® files in JPEG format, copy them to the memory card, and use
the camera to project them.
1
In PowerPoint, save a PowerPoint file with a different name in JPEG format.
•
A new folder with the same name as the renamed file is created, and a JPEG file for
each slide of the PowerPoint document is saved in the new folder.
Be sure to use PowerPoint to save the file with a new name. Refer to the PowerPoint
Help documentation for more information on saving files with new names and in
different formats.
•
2
Change the name of the folder and JPEG files.
1
•
Folder name: three-digit single-byte number + five-character single-byte alphabetic
2
string
e.g. “105USERS”
JPEG file name: FSCN + four-digit single-byte number
3
•
e.g. “FSCN0001.jpg,” “FSCN0002.jpg,” etc.
1. Use a three-digit number that is one higher than the highest number used for existing
subfolders in the DCIM folder described in step 3. The “105” in the example above is
used when “104” is the highest number in the names of existing subfolders.
2. “NIKON” cannot be used as the five-character single-byte alphabetic string.
3. The JPEG files can be projected in the same order as the slides in the PowerPoint
presentation if their four-digit single-byte file numbers are placed in the same order.
3
4
Using the card reader, open the memory card4 folder on the computer
desktop.
•
Open the DCIM folder and copy the folder containing the JPEG files created in step 2
into it.
•
Additional JPEG files created from PowerPoint files can be added to the folders
containing the JPEG files. (However, only the files can be added to these folders. The
folders containing the files cannot be placed in these folders.)
When removing the memory card from the computer, remove the removable disk first
and then remove the memory card.
•
4. Use a memory card that has been formatted or used for shooting at least once with the
COOLPIX S1100pj.
Insert the memory card into the camera, turn on the camera, and press the
P button.
•
The camera’s built-in projector operates the same as normal when projecting
PowerPoint documents converted to JPEG format.
C Notes on Playing Back PowerPoint Documents (JPEG Files)
• PowerPoint animations cannot be projected.
• In thumbnail playback mode, PowerPoint documents are displayed as black thumbnails.
174
Caring for the Camera
Maximizing Camera Life and Performance
To ensure continued enjoyment of this Nikon product, observe the following
precautions when using or storing the device.
B Keep dry
The device will be damaged if immersed in water or subjected to high humidity.
B Do not drop
The product may malfunction if subjected to strong shock or vibration.
B Handle the lens, projector window, and all moving parts with care
Do not apply force to the lens, lens cover, projector window, monitor, memory card slot or battery
chamber. These parts are easily damaged. Applying force to the lens cover could result in camera
malfunction or damage to the lens. Should the monitor break, care should be taken to avoid injury
caused by broken glass and to prevent the liquid crystal from the display touching the skin or
entering the eyes or mouth.
B Do not point the lens at strong light sources for extended periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may cause deterioration of the CCD image sensor, producing a
white blur effect in photographs.
B Keep away from strong magnetic fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charge or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data stored on the memory
card, or affect the product’s internal circuitry.
B Avoid sudden changes in temperature
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.
B Turn the product off before removing or disconnecting the power source
Do not remove the battery while the product is on, or while images are being recorded or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
175
Maximizing Camera Life and Performance
C The Battery
• Check the battery level before using the camera and replace or charge the battery if necessary. Do
not continue charging once the battery is fully charged as this will result in reduced battery
performance. Whenever possible, carry a fully charged spare battery when taking pictures on
important occasions.
• Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). Failure
to observe this precaution could damage the battery or impair its performance.
• Charge the battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F) before
use. When the battery temperature is between 0 and 10 °C (32 to 50 °F) or 45 to 60 °C (113 to
140 °F), the chargeable capacity may decrease. The battery will not charge if its temperature is
below 0 °C (32 °F) or above 60 °C (140 °F).
• Note that the battery may become hot during use; wait for the battery to cool before charging.
Failure to observe these precautions could damage the battery, impair its performance, or prevent
it from charging normally.
• On cold days, the capacity of batteries tends to decrease. Be sure that the battery is fully charged
before heading outside to take pictures in cold weather. Keep spare batteries in a warm place and
exchange as necessary. Once warmed, a cold battery may recover some of its charge.
• Dirt on the battery terminals can prevent the camera from functioning. Should the battery
terminals become dirty, wipe them off with a clean, dry cloth before use.
• If the battery will not be used for some time, insert it in the camera and run it flat before removing
it for storage. The battery should be stored in a cool location with an ambient temperature of 15 to
25 °C (59 to 77 °F). Do not store the battery in hot or extremely cold locations.
• Always remove the battery from the camera or optional battery charger when it is not being used.
When inserted, minute amounts of current are drawn from the battery even when not in use. This
may result in excessive draining of the battery and complete loss of function. Turning the camera
on or off while the battery is exhausted can result in reduced battery life.
• Recharge the battery at least once every six months and completely exhaust it before returning it
to storage.
• After removing the battery from the camera or battery charger, replace the supplied terminal
cover and store in a cool place.
• A marked drop in the time a fully-charged battery retains its charge, when used at room
temperature, indicates that the battery needs to be replaced. Purchase a new EN-EL12 battery.
• Replace the battery when it no longer holds a charge. Used batteries are a valuable resource.
Please recycle used batteries in accordance with local regulations.
176
Maximizing Camera Life and Performance
Cleaning
Avoid touching the lens/projector window with your fingers. Remove dust or
lint with a blower (typically a small device with a rubber bulb attached to one
end that is pumped to produce a stream of air out the other end). To remove
Lens/
projector fingerprints or other stains that cannot be removed with a blower, wipe the
window
Monitor
Body
lens/projector window with a soft cloth, using a spiral motion that starts at the
center of them and working toward the edges. If this fails, clean them using a
cloth lightly dampened with commercial lens cleaner.
Remove dust or lint with a blower. To remove fingerprints and other stains,
clean the monitor with a soft, dry cloth, being careful not to apply pressure.
Use a blower to remove dust, dirt or sand, then wipe gently with a soft, dry
cloth. After using the camera at the beach or other sandy or dusty
environment, wipe off any sand, dust, or salt with a dry cloth lightly dampened
with fresh water and dry thoroughly. Note that foreign matter inside the
camera could cause damage not covered by the warranty.
Do not use alcohol, thinner, or other volatile chemicals.
Storage
Turn the camera off when not in use. Be sure that the power-on lamp is off before
putting the camera away. Remove the battery if the camera will not be used for an
extended period. Do not store the camera with naphtha or camphor moth balls, or
in any of the following locations:
• Next to equipment that produces strong electromagnetic fields, such as
televisions or radios
• Exposed to temperatures below –10 °C (14 °F) or above 50 °C (122 °F)
• Places that are poorly ventilated or subject to humidity of over 60%
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again.
C Notes on the Monitor
• The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic
common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the
product will not be affected.
• White or colored streaks may be visible when bright subjects are framed in the monitor. This
phenomenon, known as “smear,” occurs when extremely bright light strikes the image sensor; it is
characteristic of image sensors and does not indicate a malfunction. Smear may also take the form
of partial discoloration in the monitor during shooting. It does not appear in images recorded with
the camera except in the cases of movies and of images recorded with Multi-shot 16 selected for
Continuous. When shooting in these modes, we recommend that you avoid bright subjects such
as the sun, reflected sunlight, and electric lights.
• Images in the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
177
Technical Notes and Index
Optional Accessories
Rechargeable battery Rechargeable Li-ion Battery EN-EL12
Battery charger
Battery Charger MH-65
AC Adapter EH-62F
Connecting the EH-62F
1
2
3
AC adapter
Be sure that the AC adapter cord has been properly aligned in AC
adapter and battery chamber grooves before closing the battery-
chamber/memory card slot cover. If the cord is not properly
aligned in the grooves, the cover and cord may be damaged when
the cover is closed.
USB cable
USB Cable UC-E6
Audio/video cable
Remote control
Audio Video Cable EG-CP14
Remote Control ML-L5
178
Optional Accessories
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved
for use in this camera.
• Memory cards with an SD Speed Class rating of 6 or faster are recommended for
recording movies. Movie recording may stop unexpectedly when memory
cards with a lower Speed Class rating are used.
2
3
SD memory card
SDHC memory card
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
SDXC memory card
64 GB
1
SanDisk
2 GB
1
TOSHIBA
2 GB
64 GB
4 GB, 8 GB, 12 GB, 16 GB, 24 GB,
32 GB
1
Panasonic
Lexar
2 GB
48 GB, 64 GB
–
1
2 GB
4 GB, 8 GB, 16 GB, 32 GB
1 If the memory card is used with a card reader or similar device, be sure that the
device supports an SD memory card of 2 GB or more.
2 SDHC compliant. If the memory card is used with a card reader or similar
device, be sure that the device is compliant with the SDHC standard.
3 SDXC compliant. If the memory card is used with a card reader or similar
device, be sure that the device is compliant with the SDXC.
Contact the manufacturer for details on the above cards.
179
Image/Sound File and Folder Names
Pictures, movies, or voice memos are assigned file names as follows.
DSCN0001.JPG
Identifier (not shown on camera monitor)
Original still pictures (voice
Extension (signifies the file type)
Still pictures
Movies
.JPG
memo attachment included)
and movies
DSCN
.MOV
.WAV
Voice memos
Small copies (voice memo
attachment included)
SSCN
RSCN
Cropped copies (voice memo
attachment included)
File number (assigned automatically in
ascending order, starting with “0001”)
Copies created using editing
function other than small
picture and crop (voice memo
attachment included)
FSCN
• Files are stored in folders named with a folder number followed by a five-
character identifier: “P_” plus a three-digit sequence number for pictures taken
all other pictures (e.g. “100NIKON”). When the number of files within a folder
reaches 9999, a new folder will be created. File numbers will be assigned
automatically starting with “0001.”
• Voice memo file names have the same identifier and file number as the picture
to which the voice memo is attached.
• Files copied using Copy>Selected images are copied to the current folder,
where they are assigned new file numbers in ascending order starting from the
largest file number in memory. Copy>All images copies all folders from the
source medium; file names do not change but new folder numbers are
assigned in ascending order, starting from the largest folder number on the
• A single folder can hold up to 200 pictures; if the current folder already contains
200 pictures, a new folder, named by adding one to the current folder name,
will be created the next time a picture is taken. If the current folder is numbered
999 and contains 200 pictures, or a picture is numbered 9999, no further
pictures can be taken until the internal memory or memory card is formatted
180
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
O (blinks)
Problem
Clock not set.
Solution
A
Set date and time.
Prepare to charge or
replace battery.
B
Battery running low.
Battery exhausted.
N
Battery exhausted.
Turn off camera, and allow
battery to cool down
before resuming use. After
five seconds, this message
will disappear, the monitor
will turn off, and the
power-on lamp will blink
rapidly. After the lamps
blink for three minutes, the
camera will turn off
P
Battery temperature is
high.
Battery temperature
high
automatically. Pressing the
power switch also turns off
the camera.
The camera turns off
automatically. Leave the
hot due to the heat of the camera off until it has
P
The camera has become
The camera will turn
off to prevent
overheating.
projector.
cooled and then turn it on
again.
•
•
Refocus.
Focus on another
subject positioned at the
same distance from the
camera as the intended
subject.
Q (● blinks red)
Camera cannot focus.
P
Wait until message clears
from display automatically
when recording is
Camera cannot perform
other operations until
recording is complete.
Please wait for the
camera to finish
recording.
–
complete.
u
Write-protect switch is in
“lock” position.
Slide write-protect switch
to “write” position.
Memory card is write
protected.
181
Error Messages
Display
Problem
Solution
A
P
•
•
Use approved card.
Check that connectors
are clean.
Confirm that memory
card is correctly inserted.
This card cannot be
used.
Error accessing memory
card.
P
•
This card cannot be
read.
Formatting deletes all data
stored on the memory
card. Be sure to tap No and
P
Card is not formatted. Memory card has not been
Format card?
Yes
No
make copies of any
formatted for use in
COOLPIX S1100pj.
pictures which need to be
kept before formatting the
memory card. Tap Yes to
format the memory card.
•
Choose smaller image
size.
Delete pictures.
•
•
•
u
Memory card is full.
Out of memory.
Remove memory card
and use internal
memory.
Error occurred while
recording picture.
Format internal memory or
memory card.
Insert new memory card or
memory card.
Camera has run out of file
numbers.
The following pictures
cannot be registered as
welcome screen.
P
Image cannot be
saved.
•
Pictures taken at an
Image mode setting of
p 3968×2232
Picture cannot be used for
welcome screen.
•
Pictures reduced to
320 × 240 size or smaller
with cropping or small
picture editing
Insufficient space to save a Delete pictures from
copy. destination.
182
Error Messages
Display
Problem
Solution
A
N
Over 200 pictures have
already been added to
album.
•
•
Remove some pictures
from album.
Add to other albums.
Album is full. No
further pictures can be
added.
u
One or more portrait
A blink was detected subjects may have blinked Check the picture in
in the picture just
taken.
when the picture was
taken.
playback mode.
•
•
Select pictures that
support editing function.
Movies cannot be
edited.
–
u
Cannot edit selected
picture.
Image cannot be
modified.
u
Time out error while
Cannot record movie. recording movie.
faster write speed.
•
Remove the memory
card from the camera to
play back pictures stored
in the camera’s internal
memory.
No pictures in the internal
memory or memory card.
•
To copy picture from
internal memory to
memory card, display
the setup menu and
select Copy.
N
Memory contains no
images.
•
•
Add the picture to
album.
Choose the album to
which picture was
added.
The picture has not been
added to album.
No pictures are contained Select the category
in the category selected in containing the sorted
auto sort mode.
pictures.
N
File cannot be viewed on
this camera. View file using
a computer or the device
used to create or edit this
file.
File contains no image
data.
File not created with this
camera.
–
P
This file cannot be
played back.
u
No pictures are available
–
98
All images are hidden. for a slide show.
183
Error Messages
Display
Problem
Solution
A
N
This image cannot be Picture is protected.
deleted.
Disable protection.
N
Destination in same time
Travel destination is in
zone as home.
–
the current time zone.
u
Rating maximum
reached. No further
pictures can be rated.
Over 999 pictures have
already been rated.
Cancel the rating setting of
them.
•
•
Apply the rating to
pictures.
Select a rating that has
been applied to pictures.
u
There are no pictures with
the selected rating.
No images with this
rating found.
Turn camera off and then
on again. If error persists,
contact retailer or Nikon-
authorized service
Lens error
Q
Lens error.
representative.
USB cable disconnected
during data transfer to
printer.
P
Turn camera off and
reconnect cable.
Communications error
Turn camera off, remove
and reinsert battery, and
turn camera on. If error
System error
Q
Error has occurred in
camera’s internal circuitry. persists, contact retailer or
Nikon-authorized service
representative.
PR
Check printer. After solving
Printer error: check
printer status.
Printer error.
the problem, tap Resume
to resume printing.*
–
–
–
PR
Printer error: check
paper
Load the specified paper,
tap Resume to resume
printing.*
Specified size of paper is
not loaded in printer.
PR
Printer error: paper
jam
Eject the jammed paper,
tap Resume to resume
printing.*
Paper has jammed in
printer.
184
Error Messages
Display
Problem
Solution
A
PR
Printer error: out of
paper
Load the specified paper,
tap Resume to resume
printing.*
No paper is loaded in
printer.
–
–
–
PR
Check ink, tap Resume to
resume printing.*
Ink error.
Printer error: check ink
Replace ink cartridge, tap
Resume to resume
printing.*
PR
Running out of ink or ink
Printer error: out of ink cartridge is empty.
PR
An error caused by the
Printer error: file
image file has occurred.
corrupt
Tap Cancel to cancel
printing.
–
* See the documentation provided with your printer for further guidance and information.
185
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem
Cause/Solution
A
•
•
•
Camera is off.
Battery is exhausted.
Standby mode for saving power: press the
power switch, the shutter-release button, A
button, c button, or b (movie-record)
button.
•
•
•
•
When flash lamp blinks, wait until flash has
charged.
Monitor is blank.
cable.
cable.
control to operate the camera in projector
mode.
•
•
Adjust monitor brightness.
Monitor is dirty. Clean monitor.
Monitor is hard to read.
•
•
Battery is exhausted.
Camera has turned off automatically to save
power.
Camera turns off without
warning.
•
has cooled and then turn it on again.
•
•
The camera and battery may not work
properly at low temperatures.
If camera clock has not been set, “Date not
set” indicator blinks during shooting and
movie recording. Pictures and movies
recorded before clock is set are dated “00/00/
0000 00:00” or “01/01/2010 00:00”
Date and time of recording are
not correct.
respectively. Set the correct time and date
from the Date option in the setup menu.
Check camera clock regularly against more
accurate timepieces and reset as required.
•
No indicators displayed in
monitor.
Playback is set to Auto info for Monitor
settings in the setup menu.
Date imprint not available.
Date setting is not applied in the setup menu.
186
Troubleshooting
Problem
Cause/Solution
A
•
•
Another function that restricts the Date
imprint option is enabled.
The current shooting mode is one that does
not support Date imprint.
Date not appearing on pictures
even when Date imprint is
enabled.
Clock battery is exhausted; all settings were
restored to their default values.
Camera settings reset.
Battery temperature is high. Turn off camera and
allow battery to cool down before resuming use.
After the lamp blinks for three minutes, the
camera will turn off automatically. Pressing the
power switch also turns off the camera.
Monitor turns off, and the
power-on lamp blinks rapidly.
•
•
Battery of the remote control is exhausted.
Point the remote control at the infrared
receiver on the front or rear of the camera at
the distance within approximately 5 m (16 ft.).
The remote control cannot be used when
Smile timer is set to On in smart portrait
mode and the camera detects human faces.
The shutter may not be released when
attempting to use the remote control to take
pictures of scenes exhibiting severe
•
•
–
Camera does not respond to
remote control operation.
backlighting.
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a
strong external static charge. Turn the camera off, remove and replace the battery,
then turn the camera on again. In the event of continued malfunction, contact
your retailer or Nikon-authorized service representative. Note that disconnecting
the power source as described above may result in the loss of any data not
recorded to internal memory or the memory card at the time the problem
occurred. Data already recorded will not be affected.
187
Troubleshooting
Shooting
Problem
Cause/Solution
A
•
items or setup menu are displayed, press the
shutter-release button.
No picture taken when shutter-
release button is pressed.
•
•
Battery is exhausted.
When flash lamp blinks, flash is charging.
•
The intended subject is one with which
autofocus does not perform well.
Camera cannot focus.
Pictures are blurred.
•
•
Set AF assist in the setup menu to Auto.
Turn camera off and then on again.
•
•
•
•
•
Use flash.
Increase the ISO sensitivity value.
Enable vibration reduction.
Use BSS (best shot selector).
Use tripod and self-timer.
Smear occurs when extremely bright light
strikes the image sensor. When shooting with
Continuous set to Multi-shot 16 and when
recording movies, avoiding bright objects, such
as the sun, reflections of the sun, and electric
lights is recommended.
Streaks of light or partial
discoloration are visible in the
monitor.
Bright specks appear in
pictures taken with flash.
Flash is reflecting off particles in air. Set the flash
mode setting to c (off).
•
•
The flash mode is set to c (off).
Scene mode with which the flash does not
function is selected.
Flash does not fire.
•
•
On is selected for Blink proof in smart
portrait mode.
Another function that restricts flash is
enabled.
•
•
Digital zoom is not available in the following
situations.
-
Digital zoom cannot be used.
shooting setting.
-
When Portrait or Night portrait scene
mode is selected.
When shooting in smart portrait mode
-
-
Another function that restricts the Image mode
option is enabled.
Image mode not available.
188
Troubleshooting
Problem
Cause/Solution
A
Off is selected for Sound settings>Shutter
sound in setup menu. No sound is heard with
some shooting modes and settings, even when
On is selected.
No sound when shutter is
released.
Off is selected for the AF assist option in the
setup menu. AF-assist illuminator may not light
depending on the position of the focus area or
the current scene mode, even when Auto is
selected.
AF-assist illuminator does not
light.
Pictures appear smeared.
Colors are unnatural.
Lens is dirty. Clean lens.
White balance does not match light source.
Shutter speed too slow or ISO sensitivity is high
Randomly spaced bright pixels as the subject is dark. Noise can be reduced by:
(“noise”) appear in image.
•
•
Using flash.
Specifying a lower ISO sensitivity setting.
•
•
•
•
•
•
The flash mode is set to c (off)
Flash window is blocked.
Subject is beyond flash range.
Adjust exposure compensation.
Increase ISO sensitivity.
mode or set the flash mode setting to X (fill
flash).
Pictures are too dark
(underexposed).
Pictures are too bright
(overexposed).
Adjust exposure compensation.
When taking pictures with b (auto with red-
eye reduction) or fill flash with slow sync and
red-eye reduction in Night portrait scene
Unexpected results when flash mode, In-Camera Red-Eye Fix may be applied to
set to b (auto with red-eye
areas not affected by red-eye. Use any scene
mode other than Night portrait, and change
the flash mode to any setting other than b
(auto with red-eye reduction) and try shooting
again.
reduction).
•
•
Under some shooting conditions, facial skin
tones may not be softened.
Select e (skin softening) for Glamour
retouch in the retouch menu for pictures
containing four or more faces.
Skin tones are not softened.
189
Troubleshooting
Problem
Cause/Solution
A
It may take more time to save images in the
following situations.
•
•
•
When the noise reduction function is in
operation
eye reduction)
When the skin softening function is applied
while shooting
Saving images takes time.
Playback
Problem
Cause/Solution
A
•
•
File or folder was overwritten or renamed by
computer or other make of camera.
movies recorded with another make or model
of digital camera.
–
File cannot be played back.
Cannot zoom in on picture.
Playback zoom cannot be used with movies,
small pictures, or pictures that have been
cropped to a size of 320 × 240 or smaller.
–
•
•
taken with other cameras. Voice memos
attached to images using another camera
cannot be played back on this camera.
Cannot record or play back
voice memos.
•
•
These options cannot be used with movies.
These options cannot be used with pictures
taken at an Image mode setting of
p 3968×2232.
Cannot edit pictures.
•
•
Camera is unable to edit pictures taken with
other cameras.
•
•
Choose correct Video mode in Interface
option.
Memory card contains no pictures. Replace
the memory card. Remove the memory card
to play back pictures from the internal
memory.
Pictures not displayed on
television.
•
TV display is turned off and pictures are
displayed in the camera monitor.
190
Troubleshooting
Problem
Cause/Solution
Data on the memory card may not be played
A
Album icon restored to default
settings, or pictures added to
album not displayed in favorite back correctly if overwritten by a computer.
pictures mode.
–
•
•
other than the category currently displayed.
COOLPIX S1100pj and pictures copied using
the Copy option cannot be displayed in auto
sort mode.
The recorded pictures are not
displayed in auto sort mode.
•
•
Pictures recorded in the internal memory or
on the memory card may not be played back
correctly if overwritten by a computer.
added to each category. If the desired
category already contains 999 pictures or
movies in total, new pictures or movies
cannot be added.
–
•
Select the Interface setting from the setup
menu and set the USB option to MTP/PTP,
and try to connect the camera again.
Camera is off.
•
•
•
•
•
•
–
Nikon Transfer 2 does not start
when camera is connected.
Battery is exhausted.
USB cable is not correctly connected.
Camera is not recognized by the computer.
Confirm system requirements.
Refer to help information contained in
ViewNX 2.
The PictBridge startup screen is
not displayed when the
camera is connected to a
printer.
Select the Interface setting from the setup
try to connect the camera again.
•
•
Memory card contains no pictures. Replace
the memory card.
Remove the memory card to print pictures
from the internal memory.
Pictures to be printed are not
displayed.
191
Troubleshooting
Problem
Cause/Solution
A
Paper size cannot be selected from the camera
in the following situations, even when printing
from a PictBridge-compatible printer:
Cannot select paper size with
camera.
•
specified by the camera.
•
The printer automatically selects the paper
size.
–
•
•
Projector window is dirty.
The camera is placed too far or too close to
the screen. Adjust the distance between the
camera and the screen.
Projected pictures are not
sharp.
•
The picture is out of focus. Adjust the focus
with the projector focus dial.
192
Specifications
Nikon COOLPIX S1100pj Digital Camera
Type
Compact digital camera
Effective pixels
Image sensor
Lens
14.1 million
1
/2.3-in. type CCD; total pixels: approx. 14.48 million
5× optical zoom, NIKKOR lens
Focal length
5.0-25.0mm (angle of view equivalent to that of 28-140 mm
lens in 35mm [135] format)
f/-number
Construction
Digital zoom
f/3.9-5.8
13 elements in 9 groups
Up to 4× (angle of view equivalent to that of approx. 560 mm
lens in 35mm [135] format)
Vibration reduction
Autofocus (AF)
Combination of lens-shift and electronic VR (still pictures)
Lens-shift (movies)
Contrast-detect AF
Focus range (from
lens)
•
•
Approx. 30 cm (1 ft.) to ∞ (W); approx. 50 cm (1 ft. 8 in.) to ∞ (T)
Macro mode: Approx. 3 cm (1.2 in.) to ∞ zoom indicator
positioned to the left of K to maximum (wide-angle
position)
Focus-area selection
Monitor
Face priority, auto (9-area automatic selection), center, manual
(focus area can be selected using the touch panel), subject
tracking
7.5 cm (3-in.), approx. 460k-dot, TFT LCD (touch panel) and
5-level brightness adjustment
Frame coverage
(shooting mode)
Approx. 97% horizontal and 97% vertical (Compared to actual
picture)
Frame coverage
(playback mode)
Approx. 100% horizontal and 100% vertical (Compared to
actual picture)
Storage
Media
•
•
Internal memory (approx. 79 MB)
SD/SDHC/SDXC memory card
File system
File formats
DCF, Exif 2.2, and DPOF compliant
Still pictures: JPEG
Sound files (Voice Memo): WAV
Movies: MOV (video: MPEG-4 AVC/H.264, audio: AAC monaural)
Image size (pixels)
•
•
•
•
•
•
•
•
14M (High image quality) [4320 × 3240P]
14M [4320 × 3240]
8M [3264 × 2448]
5M [2592 × 1944]
3M [2048 × 1536]
PC [1024 × 768]
VGA [640 × 480]
16:9 [3968 × 2232]
193
Specifications
ISO sensitivity (Standard
output sensitivity)
•
•
•
ISO 80, 100, 200, 400, 800, 1600, 3200, 6400
Auto (auto gain from ISO 80 to 800)
Fixed range auto (ISO 80 to 200, 80 to 400)
Exposure
Metering
256-segment matrix, center-weighted (digital zoom less than
2×), spot (digital zoom 2× or more)
Exposure control
Programmed auto exposure with motion detection and
exposure compensation
1
(–2.0 to +2.0 EV in steps of /3 EV)
Range
(A auto mode)
[W]: 1 to 16.7 EV
[T]: 2.1 to 17.9 EV
(exposure values achieved with automatic ISO sensitivity
adjustment converted to ISO 100 values)
Shutter
Speed
Mechanical and charge-coupled electronic shutter
1
/1500-2 s
4 s (when scene mode is set to Fireworks show)
Electronically-controlled ND filter (–2 AV) selection
2 steps (f/3.9 and f/7.8 [W])
Aperture
Range
Self-timer
Built-in flash
Range (approx.)
Can be selected from 10 and 2 second duration
[W]: 0.3 to 3.5 m (1 ft. to 11 ft.)
[T]: 0.5 to 2.5 m (1 ft. 8 in. to 8 ft. 2 in.)
(ISO sensitivity: Auto
)
Flash control
TTL auto flash with monitor preflashes
Hi-Speed USB
Interface
Data Transfer Protocol MTP, PTP
Video output
I/O terminal
Projector
Can be selected from NTSC and PAL
Audio video output/digital I/O (USB)
Projection system
LCD panel
Single lamp/single LCD panel
One 0.4-in. reflective panel with an aspect ratio of 4 : 3,
approx. 921k-dot
Projector lens
Light source
21mm f/3.5, manual focus
One high luminance white LED
13 to 120 cm (5 to 47-in.)
Approx. 0.26 to 2.4 m (10 in. to 7 ft. 10 in.)
Full color (approx. 16.7 million colors)
Up to 14 lumens
Image size
Throw distance
Number of colors
1
Brightness
Contrast ratio
30 : 1
194
Specifications
Resolution (output)
VGA equivalent
Endurance (battery
life)
Approx. 1 h with EN-EL12 battery
Supported languages
Arabic, Chinese (Simplified and Traditional), Czech, Danish,
Dutch, English, Finnish, French, Greek, German, Hungarian,
Indonesian, Italian, Japanese, Korean, Polish, Portuguese,
Norwegian, Russian, Spanish, Swedish, Thai, Turkish
Power sources
One EN-EL12 Rechargeable Li-ion Battery (supplied)
AC Adapter EH-62F (available separately)
2
Battery life
(EN-EL12)
Still pictures : Approx. 220 shots
Movies: Approx. 1 h 35 min (HD 720p (1280×720))
Tripod socket
1/4 (ISO 1222)
Dimensions
(W × H × D)
Approx. 100.8 × 62.7 × 24.1 mm (4.0 × 2.5 × 1.0 in.) (excluding
projections)
Weight
Approx. 180 g (6.4 oz.) (with battery and SD memory card)
Operating environment
Temperature
0 to 40 °C (32 to 104 °F)
When using the projector: 0 to 35 °C (32 to 95 °F)
Humidity
Less than 85% (no condensation)
• Unless otherwise stated, all figures are for a camera with a fully-charged
Rechargeable Li-ion Battery EN-EL12 operated at an ambient temperature of
25 °C (77 °F).
1 Measurement, measuring conditions, and method of notation all comply with ISO 21118.
2 Based on Camera and Imaging Products Association (CIPA) standards for measuring the life
of camera batteries. Measured at 23 ( 2) °C (73 ( 4) °F); zoom adjusted with each shot, flash
fired with every other shot, image mode set to R 4320×3240. Battery life may vary
depending on shooting interval and length of time menus and images are displayed.
195
Specifications
Rechargeable Li-ion Battery EN-EL12
Type
Rechargeable lithium-ion battery
Rated capacity
Operating temperature
DC 3.7 V, 1050 mAh
0 to 40 °C (32 to 104 °F)
Dimensions
(W × H × D)
Approx. 32 × 43.8 × 7.9 mm (1.3 × 1.7 × 0.3 in.) (excluding
projections)
Weight
Approx. 22.5 g (0.8 oz) (excluding terminal cover)
Battery Charger MH-65
Rated input
AC 100-240 V, 50/60 Hz, 0.08-0.05 A
8-12 VA
Rated capacity
Rated output
DC 4.2 V, 0.7 A
Battery
Rechargeable Li-ion Battery EN-EL12
Approx. 2 hours 30 minutes when battery is fully discharged
0 to 40 °C (32 to 104 °F)
Charging time
Operating temperature
Dimensions
(W × H × D)
Approx. 58 × 27.5 × 80 mm (2.3 × 1.1 × 3.1 in.) (excluding
power cable)
Length of power cable
Weight
Approx. 1.8 m (6 ft.)
Approx. 70 g (2.5 oz) (excluding power cable)
B Specifications
Nikon will not be held liable for any errors this manual may contain. The appearance of this product
and its specifications are subject to change without notice.
196
Specifications
Supported Standards
•
•
•
DCF: Design Rule for Camera File System is a standard widely used in the digital
camera industry to ensure compatibility among different makes of camera.
DPOF: Digital Print Order Format is an industry-wide standard that allows
pictures to be printed from print orders stored on memory card.
Exif version 2.2: This camera supports Exchangeable image file format (Exif)
version 2.2 for digital still cameras, a standard that allows information stored
with photographs to be used for optimal color reproduction when images are
output from Exif-compliant printers.
•
PictBridge: A standard developed cooperatively by the digital camera and
printer industries, allowing photographs to be output directly to a printer
without connecting the camera to a computer.
197
Index
J
L
E
F
M
G
H
N
I
O
P
199
Index
Q
T
R
U
S
V
200
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
YP0G01(11)
6MM85411-01
|
