Newcon Optik BDN 14X50 User Manual

Operation Manual  
BDN 14x50  
Day / Night Binoculars  
105 Sparks Ave., Toronto ON, M2H 2S5  
FEATURES  
This optical instrument utilizes unique optical scheme to that enables  
observer to use the high magnification binoculars 24 hours a day,  
eliminating the need for separate day and night optics.  
Day / Night round the clock model  
High magnification with large objective lens  
Rigid construction  
Weather proof, water resistant  
Wide field of view  
Easy switch between day and night modes  
SPECIFICATIONS  
Day  
14.0  
4.7  
Night  
5
14.7  
Magnification  
Field of view, °  
Objective lens diameter, mm  
Dioptric correction  
Typical resolution of the Image  
Intensifier Tube (IIT), lp/mm  
Interpupillary distance adjustment  
range, mm  
50  
±5  
45-72  
55-74  
Operating temperature, °C  
Battery  
-40°C to +55°C  
2xAA  
Dimensions, mm  
Weight, g  
235х 168 х 74  
1,500  
2
DESIGN AND APPEARANCE  
1 – Body  
2 – Day / night switch  
3 – Eyepieces  
5 – Battery compartment with cap  
7 – Objective lens caps  
4 – Eyepiece dioptric adjustment knobs  
6 – Rubber grip  
OPERATION DURING DAY  
Unpack the unit from the soft case, trying to keep the lenses closed  
by caps.  
Make sure that the switch (2) is set to “D” position.  
Remove the objective caps (7). Aim the unit to the observed object.  
The eye cups can be folded as shown below for eyeglasses wearers.  
3
Adjust the distance between the eyes by turning both eyepiece  
assemblies (3) until two images converge into one. This adjustment is  
made tough intentionally to provide for a water resistance.  
Adjust the focus individually for each eye using the focus adjustment  
knobs (4).  
put on the objective lens caps after you finish observation.  
OPERATION DURING NIGHT  
Unpack the unit from the soft case.  
If the batteries were not installed, unscrew the battery cap (5) and  
install the batteries, observing correct polarity as drawn schematically  
on the body (1) (“-“ towards the bottom of the compartment).  
The eye cups can be folded as shown below for eyeglasses wearers.  
Remove the objective lens caps (7). Aim the unit to the observed  
object.  
Flip the switch (2) into “N” position. You will see greenish light through  
the eyepieces with outlines of the observed object.  
Adjust the distance between the eyes by turning both eyepiece  
assemblies (3) until two images converge into one. This adjustment is  
made tough intentionally to provide for a water resistance.  
Adjust the focus individually for each eye using the focus adjustment  
knobs (4).  
Put on the objective lens caps and flip the switch into “D” position  
after you finish observation.  
4
WARRANTY  
NEWCON warrants this product against defects in materials and  
workmanship for one year from the date of the original purchase, but no  
more than 18 months from the date of manufacturing. Longer warranty is  
available, subject to the terms of the specific sales contract. Should your  
Newcon product prove to be defective during this period, please deliver  
the product securely packaged in its original container or an equivalent,  
along with the proof of the original purchase date, to your Newcon  
Dealer.  
Newcon will repair (or, at its option, replace with the same or comparable  
model), the product or part thereof, which, on inspection by Newcon, is  
found to be defective in materials or workmanship.  
What This Warranty Does Not Cover:  
NEWCON is not responsible for warranty service should the product fail  
as a result of improper maintenance, misuse, abuse, improper  
installation, neglect, damage caused by disasters such as fire, flooding,  
lightning, improper power supply, or service other than by a NEWCON  
Authorized Service.  
Postage, insurance, and shipping costs incurred while presenting your  
NEWCON product for warranty service are your responsibility.  
If shipping from North America, please, include a cheque or money order  
payable to NEWCON OPTIK for the amount of $15.00 to cover handling  
and return shipping.  
CUSTOMER SUPPORT  
Should you experience any difficulties with your Newcon Optik product,  
consult this manual first.  
If the problem remains, contact our customer support department at  
+1(416) 663-6963 or toll free at 1-877-368-6666 (North America only).  
Our operating hours are 9am-5pm, Monday - Friday, Eastern Standard  
Time.  
Under no circumstances should the equipment be sent to Newcon  
without authorisation from our technical support department.  
Newcon accepts no responsibility for unauthorized returns.  
To locate NEWCON Authorized Dealer call +1(416) 663-6963 or fax  
+1(416) 663-9065, email: [email protected]  
The defective products should be shipped to:  
From the USA only:  
2331 Superior Ave. Cleveland, OH 44114, USA  
From all other countries:  
105 Sparks Ave., Toronto ON, M2H 2S5, CANADA  
5
QUALITY ACCEPTANCE CERTIFICATE  
Image Intensifier Tube Serial Number: _______________________  
Min  
45  
Measured  
Resolution, lp/mm  
Photocathode sensitivity,  
500  
integral, μA/ lm  
Light amplification  
25,000  
BDN 14x50 serial number _____________________________  
This Day / Night Binoculars BDN 14x50 meet all technical specifications  
and have passed the inspection.  
Date of production: ___________  
Quality Inspector signature: __________________________  
Quality Assurance Seal  
6
NEWCON OPTIK 2010  
Printed in Canada  

Pioneer Car Video System AVH P6400CD User Manual
Phoenix Gold Car Amplifier R10001 User Manual
Philips PowerLite LR6PS48C User Manual
Philips CID3692 User Manual
Panasonic CQ 4500U User Manual
Panasonic Camcorder HX WA30 User Manual
Orion Car Audio XTREME 300 User Manual
Magnadyne M1 CD User Manual
Kenwood Excelon KVT 815DVD User Manual
JVC KD R618 User Manual