HS850
Export Law Assurances
Welcome
This product is controlled under the export
regulations of the United States of America and
Canada. The Governments of the United States
of America and Canada may restrict the
exportation or re-exportation of this product to
certain destinations. For further information
contact the U.S. Department of Commerce or
the Canadian Department of Foreign Affairs and
International Trade.
The Motorola Wireless Headset HS850
makes connectivity invisible and
reliable. It is astonishingly advanced and
simple to use.
Motorola is actively creating
®
The use of wireless devices and their
Bluetooth solutions for work, play,
accessories may be prohibited or restricted in
certain areas. Always obey the laws and
regulations on the use of these products.
home, and life everywhere around the
globe.
Thank you for choosing the Motorola
Wireless Headset HS850 with
Bluetooth technology!
MOTOROLA and the Stylized M Logo are
registered in the US Patent & Trademark Office.
The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under
license.
All other product or service names are the
property of their respective owners.
© Motorola, Inc., 2004, 2006.
6809509A38-O
1
2
device to determine if it is adequately
shielded from RF energy. Your physician
may be able to assist you in obtaining
this information.
Canada approved the equipment. See
Ref IC Self-Marking 6(f) and RSP-100
Sec. 4.
FCC Notice to Users
Industry Canada Notice to
Users
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
Operation is subject to the following
two conditions: (1) This device may not
cause interference and (2) This device
must accept any interference, including
interference that may cause undesired
operation of the device. See Ref IC: RSS
210 Sec. 5.11. The term “IC:” before
the certification/registration number
signifies that registration was
performed based on a Declaration of
Conformity indicating that Industry
Canada technical specifications were
met. It does not imply that Industry
Safety and General
Safety and General
7
8
interference to radio or television
reception, which can be determined by
turning the equipment off and on, you
are encouraged to try to correct the
interference by one or more of the
following measures:
Introduction
Headset Features
Headset off
Headset on
(boom closed)
(boom open)
•
•
•
Reorient or relocate the receiving
antenna.
2
3
4
Increase the separation between
the equipment and the receiver.
6
Connect the equipment to an
outlet on a circuit different from
that to which the receiver is
connected.
8
10
5
1
7
9
•
Consult the dealer or an
experienced radio/TV technician
for help.
1—Headset Indicator LED Provides
visual status about headset.
2—Volume Control Buttons Adjusts
speaker (receive) volume up or
down.
Safety and General
Introduction
9
10
3—Microphone Receives your voice
Using Your
Headset
input.
4—Boom Contains microphone and
controls power (On/Off) on headset.
5—Earhook Attaches headset to
your ear.
6—Speaker Plays the sound you
Charging Your Headset
First-Time Use—Before you can use
your headset, you need to charge its
self-contained battery for two hours.
receive on the call.
7—Charging Port Accepts the plug
for the battery charger.
8—Lanyard Loop Lets you attach a
lanyard to the headset, so you
can wear the headset around your
neck and always keep it near.
Recharging—When you hear five
rapid high tones through the headset
speaker, repeated at 20-second
intervals, the headset battery needs to
be recharged.
9—Multifunction Button
E
Controls several headset functions.
10—Removable Speaker Shroud
Over time, batteries gradually wear
down and require longer charging times.
This is normal. The more you talk on the
phone with the headset, the less
standby time your battery has.
Helps channel sound to your ear.
Shroud can be removed if it
causes discomfort.
Introduction
Using Your Headset
11
12
The rechargeable batteries
that power this product must
be disposed of properly and
Action
2
Plug the other end of the charger
into an electrical outlet.
may need to be recycled. Contact your
local recycling center for proper disposal
methods. Never dispose of batteries in a
fire because they may explode.
While charging, the headset
indicator turns on and remains on
until charging is complete. The
headset will not function while
charging. Your headset fully
How to Charge
charges in approximately two hours.
Action
3
When charging is complete
1
Plug the Motorola charger into your
headset, with the charger’s release
tab facing down and your headset
facing up.
(indicators off), remove the charger
from the electrical outlet, press the
release tab, and detach the charger
cord from the headset.
Release Tab
Facing Down
Using Your Headset
Using Your Headset
13
14
Note: You can also use a
unique ID. After your headset and phone
are paired, your headset automatically
connects to your phone any time you
open the boom.
Motorola Original™ Vehicle Power
Adapter to charge your headset while in
your vehicle.
A fully charged headset battery provides
approximately:
With your headset and phone in close
proximity:
•
•
talk time–8 hours
Step
standby time (boom open)
hours
–200
1
Put your headset into pairing mode.
a
With the headset’s boom closed,
press and hold the Multifunction
Button
indicator turns on (about
3 seconds).
E
until the headset
Pairing Your Headset
and Phone
The headset indicator turns on.
Note: You must pair your headset and
phone before you can make a call.
b
Release the button, then open the
headset boom.
“Pairing” creates a link between
devices equipped with Bluetooth
wireless technology and allows the
phone to remember your headset’s
The headset indicator remains on.
Using Your Headset
Using Your Headset
15
16
Pairing to Additional
Devices
Step
2
Perform a device discovery from
the phone.
Your headset can store pairing
For details on device discovery
for your phone, refer to the
phone’s user’s guide.
information for up to eight different
devices that have Bluetooth wireless
technology. Devices are stored in a
“Paired Device List” in memory in
chronological order. When an attempt to
pair to more than eight devices is made,
the oldest paired device is removed
from the list.
When the scan is complete, the phone
displays the devices found.
3
Select the Motorola HS850 from the
discovered devices list and confirm
following the on screen prompts.
4
When prompted by the phone, enter
the passkey 0000 and confirm to pair
the headset with the phone.
Any of the eight paired devices can
initiate a paired connection to your
headset.
The device ID is now stored in the
phone’s memory.
Your headset will only automatically
initiate a paired connection (by opening
the boom) with the last device it was
connected to. If you want to connect
your headset to another device in the
Pairing is successful when the
headset indicator flashes 10 times
rapidly.
Using Your Headset
Using Your Headset
17
18
paired device list, you must initiate the
connection from that device. Whichever
of the eight devices initiates a
connection to the headset, afterwards,
that device then becomes the “last
connected” device.
Action
3
4
Press the headset to your ear.
Point the boom toward your mouth.
Wearing on the left ear
When packaged, the headset is
configured for wear on the right ear.
To change it for wear on your left ear:
Wearing Your Headset
When packaged, your headset is
configured for wear on your right ear.
Action
Action
1
Open the boom,
then open the
earhook
1
2
Open the boom,
then open the
earhook
(90 from the
°
headset).
(45 from the
°
headset).
Loop the earhook over your ear.
Using Your Headset
Using Your Headset
19
20
Action
Controlling Headset
Volume
To increase speaker volume, press the
top volume button repeatedly until you
reach the desired volume level.
2
Gently lift and
pull the top of
the earhook up
and off the
upper hinge pin.
Then pull it
away to
To decrease speaker volume, press the
bottom volume button repeatedly until
you reach the desired volume level.
remove it.
3
4
Flip the headset over.
Hook the bottom of the earhook
onto the lower hinge pin, then lift
Volume Orientation
and pull the top of the earhook over
the upper hinge pin.
To change the volume button orientation
for left or right ear:
5
To change the volume button
orientation, see “Volume
Orientation” on page 22.
Action
1
With the headset’s boom closed,
press and hold the Multifunction
E
button until the headset
indicator turns on (about
3 seconds).
Using Your Headset
Using Your Headset
21
22
You can activate call functions according
to the following table:
Action
2
Press the volume button that you
want to use as the volume up. The
headset indicator will flash several
times to indicate success.
Device Status
Phone
Enter Pairing (Configuration) Mode:
On Off Press & hold
(boom until LED remains
Headset
Action
Repeat the above steps anytime to
change the volume button orientation.
E
closed) on. Release
open boom.
E
,
Making and Receiving
Calls
Your headset supports both Handsfree
and Headset Profiles. Accessing call
functions depends on which profile your
phone supports.
Make a Voice Dial Call:
On in idle On Short press
E
,
speak name, phone
dials call.
Dial a Number:
On–user
dials
number
On
Press SEND on
phone to complete
the call.
Note: Some phones do not support all
features listed. Please consult your
phone user’s guide.
Redial a Number:
On–Idle
On–
(Idle)
Long press
E
.
Using Your Headset
Using Your Headset
23
24
Device Status
Device Status
Phone Headset
Answer 2nd incoming call:
Phone
Headset
Action
Action
End a Call:
On–in call
On
On–in call, On
2nd call
coming in
Long press
places 1st call on
hold, answers
E
,
Short press
E
.
Put Active Call On Hold:
On–in call On
Put Active Call On Hold:
Long press
E
E
E
.
incoming call
.
Toggle between two active calls:
On–in call
On
Long press
.
On–in call, On
2nd call on
hold
Long press
E
.
Receive a Call:
On–
On
Shortpress
(call
Transfer call from phone to Headset:
On–in call On Short press
is answered)
.
phone
rings
E
,
(call transferred to
headset).
Reject a Call:
On–phone On
rings
Long press
E
.
Note: If the link is abnormally
disconnected (for example, out of
range) the headset tries to reestablish
the link.
Using Your Headset
Using Your Headset
25
26
Headset Indicator
With charger plugged in:
Headset
Headset
Indicator
Headset
Flashes at a
Standby
3-second interval (not on a call)
(0.1 seconds ON
2.9 seconds OFF).
Indicator
Headset
ON
Charging in
progress
Flashes at an
Connected
8-second interval (on a call)
(2.0 seconds ON,
6.0 seconds OFF).
OFF
Charging
complete
With no charger attached:
Note: When your wireless headset is
paired to your phone and there is no
activity for 5 minutes, the blue flashing
LED turns off. Any button press on the
headset turns on your headset and
resumes the flashing . If you press the
up and down volume buttons at the
same time during a call, the flashing
LED turns off for the rest of that call.
Headset
Indicator
Headset
OFF
Power off
ON (steady)
10 rapid flashes
Pairing mode
Pairing
successful
Using Your Headset
Using Your Headset
27
28
Audio Tone
Headset Status
Audio Tones
One low tone
Initiate voice
activation
Audio Tone
Headset Status
One high tone
when pressing
volume button
Volume maximum
or minimum
reached
Dual high/low
tone
Voice tag not
recognized
One high tone
End call
Five rapid high
tones, repeated
every 20 seconds
Low battery
Series of 4 tones, Audio link closed
high to low
(Headset mode),
call ended
(Handsfree
mode)
No audio
Out of range
indications;
deteriorating
audio quality
Fast high/lowtone No
every 5 seconds
(max. & min.
volume confirm
beep)
network/service
Series of 4 tones, Audio link open
low to high
(Headset mode),
active call (Hands
Free mode)
No tone
Power ON/OFF
Ring tone
Incoming call
Single high tone
Pairing
confirmation
Using Your Headset
Using Your Headset
29
30
motorola.com
|