BEFOREYO
Before using this product, read the Important Safety and Leg
Take a moment before you get started to famili
Bluetooth® Handsfree Headset. Along with yo
for both charging and storage.
motorola
H690
Speaker
Volume
Buttons
Charging
Contacts
(on reverse
side)
Quick Start Guide
Power
Switch
Call
Indicator
Button
Light
Microphone
CH
U BEGIN
1
Your Hea
gal Information pamphlet and follow its instructions.
Note:You can only charge
You cannot plug a Motorol
iarize yourself with your new H690
ur headset, a desktop charger is provided
Remove plastic seal off of ear cushion on
speaker.
1
2
3
Plug the Motorola charger into the port on the
desktop charger.
Place headset onto desktop charger, as shown.
Make sure charging contacts on the headset
and desktop charger connect.
Charging
Contacts
Charger
Charging
Contacts
Port
3
2
Note: Earhook must be rotated to the orientation
show above to ensure charging contacts connect.
START HERE >
PAIR
3
Your Headset
Step B - SETYOUR PHONETO LOOK FOR
YOUR HEADSET
Before you can use your headset, you must pair
(link) it with your phone.
For most Motorola phones:
Step A - ENSURE HEADSET IS IN PAIRING
MODE
M
On your Motorola phone, press
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
(Menu)
>
1
Remove headset from desktop charger and
power on by sliding Power switch to the On
position (towards Power symbol on headset).
The indicator light first flashes during power
up, then initiates easy pairing. After a few
moments, the indicator light will be steadily lit
in blue to indicate headset is in pairing mode.
The phone lists Bluetooth devices it finds.
Select Motorola H690.
2
3
Select OK or Yes to pair your headset with
your phone.
Enter the passkey: 0000 (for most phones)
Select OK.
4
5
Indicator Light
(steadily blue
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue and
purple.
for pairing mode)
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
USING YOUR H690
TEST AND USE
4
See
Your phone and headset are now paired and
ready to make and receive calls.
Features and
Functions Guide
on the reverse side
for information on
using your H690
To make a call:
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
1
2
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, make sure
your headset is turned ON and your phone's
Bluetooth feature is ON.
TROUBLESHOOTING
My headset will not charge.
Make sure your earhook and ear cushions are
properly orientated. See step 1 and “Ear
Cushions andYour Headset” to see proper
orientation.
My headset will not enter pairing mode.
Make sure that any devices previously paired with
the headset are turned off. If the indicator light is
not steadily lit in blue, turn off both the other
device and headset, wait 10 seconds, then turn
headset back on. Wait for the indicator light to
become steadily lit in blue, indicating the headset
is now in pairing mode.
My phone doesn’t find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it’s not
working.
Make sure your phone is on, and the Bluetooth
feature is turned on in your phone (see step 2). If
Bluetooth was turned off or was turned on only
temporarily, you may need to restart it (see step
2) and pair your phone and headset again (see
step 3).
TURNING H690
ON AND OFF
Features and
Functions Guide
To turn ON your H690, slide the Power
switch towards the power symbol, as
shown below.The indicator light first flashes
blue for several seconds, then:
●
flashes blue (if paired and connected with
another device)
●
becomes steadily blue (if ready to be
paired)
To turn OFF your H690, slide the Power
switch away from the power symbol.The
indicator light will turn off.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H690.
Indicator
Light
Power
Switch
EAR CUSHIONS AN ND YOUR HEADSET
Your H690 headset is supplied with multiple ear
When fitting an oval-shaped ear cushion on
your headset, be sure the cushion is pointing
towards the microphone, as shown below.
cushions.Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied ear cushions with your headset.
The ear cushion is fitted onto the end of your
headset’s earpiece speaker like shown, and
placed onto your ear when using your headset.
CHANGING FOR USE
ON OTHER EAR
WEARINGTHE
HEADSET
To wear your headset, flex the earhook and
loop it over your ear as shown.
You can wear your H690 headset on your left or
right ear.The headset comes ready for the right
ear.To change the headset for the left ear:
Gently lift and pull the
top of the earhook up
and off speaker stem, as
shown.
1
Flip the headset over.
2
3
Attach the earhook to
the speaker stem, as
shown.
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
European Union Directives
Conformance Statement
CHECKING
BATTERY LEVEL
Hereby, Motorola declares that this
product is in compliance with:
While your headset is turned on and not on
a call, you can check the battery charge
level by pressing and holding both Volume
buttons.
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
Note:This feature does not work when headset is in
pairing mode.
Product
Product
The indicator light displays charge status
until you release the buttons. See “Indicator
Light” for details on indicator light and
charge status.
Approval
Approval
Number
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
product Approval Number from your product’s label in
the “Search” bar on the web site.
MAKING CALLS
MAKING CALLS CONTINUED
Function
Action
Function
Action
Receive a call
Tap the Call button
Answer a second
incoming call
Press and hold Call
button
Mute or unmute a call
Tap both Volume
buttons
End an active call and
resume a call on hold
Tap the Call button
Reject a call
Press and hold a
Volume button until
you hear two
Reject a second
incoming call
Press and hold either
Volume button until
you hear an audio
tone
descending tones
End a call
Tap the Call button
Redial last call
Press and hold the
Call button until you
hear two ascending
tones
Note: Some features are phone/network dependent.
Make a voice dial call
Tap the Call button
and speak the
name after the tone
Note:Your H690 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
INDICATOR LIGHT
INDICATOR LIGHT
With the Charger Plugged In
With No Charger Plugged In
Headset Indicator
Headset Status
Headset Indicator
Headset Status
Power off
Red
Charging (battery
level less than 80%
charge)
Off
Three blue flashes
Steady blue
Powering on/off
Pairing mode
Yellow
Charging (battery
level more than 80%
charge)
Charging complete
Not charging*
Rapid blue/purple flashes Connection successful
Quick blue flash
Slow blue pulse
Slow blue flash
Slow red flash
Incoming/outgoing call
Connected (on a call)
Standby (not on a call)
Green
None
Idle (not connected
to phone)
When Checking Battery Level
Headset Indicator
AvailableTalkTime
Up to 5.5 hours
Slow purple pulse
Quick red flash
Connected call muted
Low battery
Green
Yellow
Red
30 minutes to 5 hours
Less than 30 minutes
Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
Note:To disable the indicator light, slide Power switch off, then
press and hold both Volume buttons AND slide Power switch
on (to turn headset on).
*See charging guidelines in the Legal and Safety pamphlet,
and remove the charger from the desktop charger and plug in
again.
AUDIOTONES
AudioTone
Ring tone
Headset Status
Incoming call
Single high tone
Phone network not
available
High to low tone
End call
Single high tone when
pressing volume button
during a call
Volume at minimum
or maximum
Ascending tone
Mute enabled
Mute reminder
Low tone
(repeated every
15 seconds)
Descending tone
Low to high tone
Mute disabled
Connection
confirmation/voice
activation
No audio indications;
deteriorating quality
Out of range
Two tones
repeated every 30 sec.
Low battery
|