Miele KWT4154UG1 User Manual

Operating and installation instructions  
Under counter wine cooler  
KWT 4154 UG-1  
en - CA  
To prevent accidents and machine damage  
read these instructions before  
installation or use.  
M.-Nr. 06 873 220  
Contents  
Problem-solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Climate range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Before installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Changing the door hinging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Under-counter installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Appliance dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Preparing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Fitting the appliance into place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
IMPORTANT SAFETY INSTRUCTIONS  
When using the appliance, follow basic Electrical safety  
safety precautions, including the  
Before installation, make sure that  
~
following:  
the voltage and frequency listed on the  
data plate correspond with the  
household electrical supply. This data  
must correspond to prevent injury and  
machine damage. Consult a qualified  
electrician if in doubt.  
Read all instructions before installation  
and use to prevent accidents and  
machine damage.  
Before installation or service,  
~
This appliance is intended for  
disconnect the power supply to the  
work area by unplugging the unit,  
"tripping" the circuit breaker or  
removing the fuse.  
residential use only. Use only as  
described in this Operating manual.  
Only use the appliance for its  
intended purpose. The manufacturer  
cannot be held responsible for  
damages caused by improper use  
of this appliance.  
Do not use an extension cord to  
~
connect this appliance to electricity.  
Extension cords do not guarantee the  
required safety of the appliance  
(e.g., danger of overheating).  
This appliance complies with current  
safety requirements. Improper use  
of the appliance can lead to  
personal injury and material  
damage.  
Be certain your appliance is  
~
properly installed and grounded by a  
qualified technician. To guarantee the  
electrical safety of this appliance  
continuity must exist between the  
appliance and an effective grounding  
system. It is imperative that this basic  
safety requirement be met. If there is  
any doubt, have the electrical system of  
the house checked by a qualified  
electrician. The manufacturer cannot be  
held responsible for damages caused  
by the lack, or inadequacy, of an  
effective grounding system.  
Keep these operating instructions in  
a safe place and pass them on to  
any future user.  
Warning: At an altitude of more than  
5900 ft (1500 m) the glass door can  
break. Danger of injuries.  
Only connect power to the  
~
appliance when all installation work is  
complete.  
4
IMPORTANT SAFETY INSTRUCTIONS  
Installation  
Use  
Persons who lack physical, sensory  
~
This appliance is top-heavy and  
must be secured to prevent the  
possibility of tipping forward.  
Keep the door closed until the  
appliance is completely installed  
and secured per installation  
instructions.  
or mental abilities, or experience with  
the machine should not use it without  
supervision or instruction by a  
responsible person.  
To reduce the risk of injury, do not  
~
allow children to play in, on or near the  
appliance, especially in the door hinge  
area.  
This appliance must be installed  
~
and connected in compliance with the  
installation instructions.  
Do not store or use gasoline or other  
~
flammable vapors and liquids in the  
vicinity of this or any other appliance.  
Installation and repair work should  
~
be performed by a Miele authorized  
service technician. Work by unqualified  
persons could be dangerous and may  
void the warranty.  
Do not use any oils or grease on the  
~
door seal, as these will cause the seal  
to deteriorate and become porous with  
time.  
Do not operate any appliance with a  
~
Do not block the ventilation gaps in  
~
damaged cord or plug, or if the  
appliance has been damaged in any  
manner. Contact Miele’s Technical Ser-  
vice Department.  
the plinth or the top of the appliance  
housing unit as this would impair the  
efficiency of the appliance, increase the  
electricity consumption and could  
cause damage to the appliance.  
This equipment is not designed for  
~
maritime use or for use in mobile  
installations such as recreational  
vehicles or aircraft.  
Never use a steam cleaner to clean  
~
the appliance. Pressurized steam could  
damage electrical components and  
cause a short circuit.  
Do not install the appliance in a  
~
room with too low an ambient  
Do not use any electrical equipment  
~
temperature, e.g., a garage, as this  
may lead to the appliance switching off  
for longer periods so that it cannot  
maintain the required temperature.  
inside the appliance. Danger of injury.  
5
IMPORTANT SAFETY INSTRUCTIONS  
Disposal of your old appliance  
Before disposing of an old  
~
appliance, first make the door latch or  
lock unusable.  
Take off the doors.  
~
Leave the shelves in place so that  
~
children may not easily climb inside.  
Consult with your municipal policy  
~
on recycling.  
Be careful not to damage any part of  
~
the pipework while awaiting disposal  
by:  
-
puncturing the refrigerant  
channels in the evaporator.  
bending any pipework.  
-
-
scratching the surface coating.  
Splashes of refrigerant can damage the  
eyes.  
Your old refrigerator may have a  
~
cooling system that used CFC's  
(chlorofluorocarbons). CFC's are  
believed to harm stratospheric ozone.  
If you intentionally release this CFC  
refrigerant, you can be subject to fines  
and imprisonment under provisions of  
environmental legislation. Make sure the  
CFC refrigerant is removed and disposed  
of by a qualified technician.  
The manufacturer cannot be held  
liable for damage caused by  
non-compliance with these  
Important Safety instructions.  
SAVE THESE  
INSTRUCTIONS  
6
Description of the appliance  
aOn/Off button  
eSafety lock indicator light  
fAlarm Off button  
bTemperature display for upper zone  
cTemperature selector buttons for  
upper zone  
gTemperature display for lower zone  
hTemperature selector buttons for  
upper zone  
(+ for warmer; - for colder)  
dConstant humidity (Dynamic cooling)  
button and indicator light  
(+ for warmer; - for colder)  
iInterior lighting button and indicator  
light  
7
Description of the appliance  
aInterior lighting  
bIsolation shelf for thermal separation  
cWooden shelf with decorative strip for descriptive labels  
dActive charcoal filter  
eCondensate channel and  
drain hole  
8
Caring for the environment  
Disposal of packing materials  
Disposal of an old appliance  
The cardboard box and packing  
materials are biodegradable and  
recyclable. Please recycle.  
Old appliances contain materials that  
can be recycled. Please contact your  
local recycling center about the  
possibility of recycling these materials.  
Ensure that any plastic wrappings,  
bags, etc., are disposed of safely and  
kept out of the reach of babies and  
young children. Danger of suffocation!  
Before discarding an old appliance,  
disconnect it from the gas and  
electrical supply and cut off the power  
cord to prevent it from becoming a  
hazard.  
9
Switching on and off  
Before using for the first time  
Turning the appliance off  
^ Clean the inside of the appliance and ^ Press the On/Off button until the  
the accessories with warm water and  
a little dishwashing liquid, then dry  
with a soft cloth.  
temperature displays go out.  
The cooling system switches off. (If this  
does not happen, the safety lock is still  
activated).  
To ensure that the appliance  
functions correctly, let it stand for 30  
minutes to 1 hour once it has been  
transported to its final location, and  
before connecting it to the power  
supply.  
Safety lock  
The safety lock can be activated to  
prevent the appliance from being  
switched off inadvertently.  
Turning the appliance on  
Activating or de-activating the safety  
lock  
^ Press the On/Off button so that the  
temperature displays light up.  
^ Press and hold the constant humidity  
button for approx. 5 seconds.  
The alarm will sound. The appliance  
starts to cool down, and the interior  
lighting will come on when the door is  
opened.  
The constant humidity indicator light will  
flash, and a ; will flash in the  
right-hand temperature display.  
^ Press the constant humidity button  
again.  
Switching off the alarm  
; will light up in the display.  
^ Press the Alarm Off button.  
The alarm will stop. The temperature  
displays will continue to flash until the  
set temperatures have been reached.  
^ You can now choose between ; 0  
and ; 1 by pressing the left-hand  
temperature selector buttons:  
0: the safety lock is de-activated,  
1: the safety lock is activated.  
10  
Switching on and off  
^ Press the constant humidity button to  
save the setting.  
The safety lock indicator light X will  
light up when the safety lock has been  
activated.  
^ Press the On/Off button to come out  
of setting mode. If you do not do this,  
the appliance will automatically  
switch over to normal operation after  
a few minutes.  
Turning off for longer periods  
of time  
If the appliance is not going to be used  
for a longer period of time (for example,  
during a vacation) some precautions  
should be taken.  
^ Turn the appliance off at the main  
switch.  
^ Unplug the appliance.  
^ Clean the interior.  
^ Leave the doors open to prevent  
odors.  
11  
Optimum temperature and humidity  
Wine will continue to mature depending Isolation shelf for thermal separation  
on the surrounding conditions. The  
The appliance has a fixed isolation  
length of time which wine can be kept  
shelf, which divides the cabinet into two  
in good condition will therefore depend  
zones. The temperature for each zone  
not only on the temperature but also on  
can be set separately, so that different  
the air quality.  
wines (red and white) can be stored at  
their ideal temperature.  
Temperature  
Setting the temperature  
Wine can be stored at a temperature  
between 5°C and 18°C (41°F - 64°F).  
The temperatures are set using the two  
The optimum temperature is approx.  
buttons under the temperature  
10-12°C (50°F - 54°F). Most white wines  
displays.  
are palatable at this temperature. It is  
best to take red wine out of the  
appliance about two hours before  
drinking. Open the wine to allow it to  
breathe so the aroma can develop.  
After two hours, red wine will be at the  
correct temperature for drinking.  
Press the  
+ button: to set the temperature  
warmer  
If wine is stored at a temperature above  
22°C (72°F) it will mature too quickly.  
By contrast, wine should not be stored  
below 5°C (41°F) for a long period of  
time, as it will not mature fully at this low  
temperature.  
- button: to set the temperature colder  
The temperature being set will flash in  
the display.  
When pressing the buttons, the  
following information appears in the  
display:  
Fluctuations in temperature put wine  
under stress and interrupt the maturing  
process. Therefore, it is very important  
to maintain a constant temperature.  
– When first pressed, the last  
temperature selected flashes.  
– Each subsequent press of the button  
adjusts the temperature shown in  
1 °C increments.  
Safety features  
A thermostat in the wine cooler  
prevents the temperature from falling  
too low. Internal heating automatically  
switches on as needed, to keep the  
temperature inside as constant as  
possible.  
– Holding the button adjusts the  
temperature continually.  
12  
Optimum temperature and humidity  
Approx. 5 seconds after releasing the  
Temperature display brightness  
button, the current temperature inside  
the applicable zone will be  
automatically shown.  
The appliance is supplied with the  
brightness of the temperature display  
set as low as possible.  
The two temperature zones are cooled  
alternately, which means that  
You can adjust the brightness of the  
temperature display as follows (both  
temperature displays will be adjusted  
together):  
(depending on the quantity of wine  
being stored) it can take several hours  
for the required temperature to be  
reached, and for the temperature  
display to adjust. If, after this time, the  
temperature is still too high or too low,  
you will need to adjust it again.  
^ Press and hold in the constant  
humidity button for approx. 5  
seconds.  
Temperature range  
The temperature can be adjusted from  
5°C to 18°C (41°F - 64°F).  
The constant humidity indicator light will  
flash, and a ; will flash in the  
right-hand temperature display.  
Temperature display  
During normal operation, the  
temperature displays on the control  
panel show the temperatures inside the  
appliance.  
^ Repeatedly press one of the left-hand  
temperature selector buttons for the  
upper zone until:  
The temperature display will flash if  
– a different temperature is being set,  
^ appears in the display.  
– the temperature in one of the zones  
deviates by more than 5 °C from the  
set temperature.  
^ Press the constant humidity button  
again.  
^ lights up in the display.  
^ You can now adjust the brightness  
level by pressing the temperature  
selector buttons for the upper zone.  
You can choose from settings 1 to 5:  
1: lowest setting,  
5: brightest setting.  
13  
Optimum temperature and humidity  
^ Press the constant humidity button to Constant humidity (Dynamic cooling)  
save the setting.  
button m  
This setting enables the relative  
humidity (and temperature) inside the  
wine cooler to be distributed evenly  
throughout the interior, so that you can  
store all your wine under exactly the  
same excellent conditions.  
^ Press the On/Off button to come out  
of the setting mode. If you do not do  
this, the appliance will automatically  
switch over to normal operation after  
a few minutes.  
Turning on Dynamic Cooling  
If you would like to use the wine cooler  
to store wine for the long term, the  
constant humidity setting should be  
activated. This will create a continuous  
climate inside the appliance, imitating  
that of a wine cellar.  
Humidity level  
In a conventional refrigerator, the  
humidity levels are too low for storing  
wines. High humidity levels (60 - 70 %)  
are very important for the storage of  
wine, so that the corks remain moist.  
Under low humidity, the corks dry out  
from the outside and can no longer seal  
the bottles properly. This is why wine  
bottles should always be stored lying  
down, so that the wine can keep the  
corks moistened from within. If air  
enters the bottle, a wine will inevitably  
spoil.  
^ Press the constant humidity button  
m. The indicator light will come on.  
Even if this setting has not been  
activated, the fan in the appliance  
will come on automatically when the  
cooling system switches on, to  
ensure your wine is kept in the  
optimum climate.  
Tip: Wine bottles should stand  
upright for at least two hours before  
serving, or, better still whole day  
long, to enable deposits to settle to  
the bottom of the bottle.  
The fan automatically switches off  
when the door is open.  
14  
Optimum temperature and humidity  
Turning off Dynamic Cooling  
Because the appliance uses more  
energy when this setting is switched on,  
it should not be left on all the time.  
^ To turn off the setting, press the  
constant humidity button m. The  
indicator light will go out.  
Air exchange through the activate  
charcoal filter  
External air passes through the filter  
before entering the unit.  
The active charcoal filter ensures that  
only clean, odor-free air enters the unit,  
creating additional protection against  
odor contamination.  
The filter will need to be changed  
periodically, or when odors are  
present in the unit. See "Cleaning  
and Care - Active charcoal filter" for  
more information.  
15  
Interior lighting  
There is lighting in both the upper and  
lower zones of the wine cooler, so that  
both zones can be lit up.  
Adjusting the brightness  
The brightness of the interior lighting  
can be adjusted.  
Do NOT remove the lamp covers!  
Should the covers become  
^ Press and hold the interior lighting  
button.  
damaged and need to be removed,  
exercise caution. There are lasers  
in the lighting (laser beam class  
1M), which you should avoid looking  
at directly!  
^ At the same time, press the  
right-hand temperature selector  
buttons for the lower zone.  
Switching on the interior lighting  
Generally, wine should be stored in  
dark conditions. However, the interior  
lighting can be switched on to enable  
you to see the wine stored in the wine  
cooler.  
Press the  
+ button: to dim the lighting  
- button: to make the lighting  
brighter  
^ Press the interior lighting button.  
Both lights are turned on or off  
simultaneously.  
16  
Storing wine bottles  
Any vibration or movement of a wine  
bottle can interrupt the natural  
breathing process of the wine, which  
affects the taste.  
Descriptive labels  
Use the labels supplied to identify your  
wine quickly and easily. Insert the  
labels into the metal holders at the front  
of the shelves from above.  
As much as possible, store bottles of  
the same type of wine beside each  
other on the same shelf. Removing a  
bottle of one type will then leave the  
other types undisturbed, and this will  
avoid the need to move different bottles  
around.  
Additional labels can be obtained from  
Miele.  
Capacity  
Approx. 38 Bordeaux bottles (0.75 l)  
can be stored:  
– 15 in the upper zone  
– 23 in the lower zone  
Wooden shelves  
The wooden shelves are on runners,  
and can be pulled out to make it easier  
to store and remove bottles.  
17  
Alarm  
The appliance is equipped with an  
alarm system to ensure that the  
temperature does not rise or fall  
unnoticed and impair the wine.  
Activating the alarm system  
The alarm system is always active. It  
does not have to be turned on  
manually.  
Temperature alarm  
Turning the alarm off early  
An alarm will sound if the temperature  
in one of the zones rises or falls outside  
the set temperature range. The  
temperature display for the affected  
zone(s) will flash while the alarm  
sounds.  
Once the set temperature has been  
reached in the appliance, the alarm  
stops and the relevant temperature  
display shows a continuous light.  
However, if the noise disturbs you, you  
can turn the alarm off early if you wish.  
The set temperature determines which  
temperatures will trigger the alarm.  
The alarm will sound and the  
temperature display will flash:  
– when you switch the appliance on, if  
the temperature inside the appliance  
is very different from the set  
temperature.  
^ Press the Alarm Off button.  
The alarm will stop. The relevant  
temperature display continues to  
flash until the set temperature has  
been reached. The display then  
shows a continuous light, and the  
alarm system becomes fully active  
again.  
– if there has been a lengthy  
interruption to the power supply.  
Door alarm  
If the door has been left open for more  
than approx. 60 seconds, the alarm will  
sound.  
18  
Defrosting  
Over time, condensate and frost can  
build up on the back wall of the  
appliance. These are automatically  
defrosted and removed by the  
appliance.  
The condensate is drained away  
through a channel and drain hole into  
an evaporation system at the back of  
the appliance.  
It is important to ensure that the  
condensate channel and drain hole  
are never blocked, so that  
condensate can flow away  
unobstructed.  
19  
Cleaning and care  
Before cleaning  
To reduce the risk of electrical  
shock, disconnect the appliance  
from the power supply by shutting  
off the power main, tripping the  
circuit breaker or unplugging the  
power cord before maintenance.  
^ Unplug the appliance from the  
socket.  
^ Take out any removable parts, e.g.  
shelves, for cleaning.  
Cleaning the interior, door and  
accessories  
Never use cleaning agents  
containing abrasive substances  
such as sand, soda (sodium  
carbonate), acids or chemical  
solvents.  
Use a mild solution of warm water and  
liquid dish soap. All accessories and  
shelves should be hand-washed only.  
^ Clean the condensate channel and  
drain hole frequently, so that  
"Non-abrasive" cleaning agents are  
also unsuitable as they can cause  
matte areas to appear.  
condensate can drain away  
unhindered. Use a straw or similar  
item to clear the drain if necessary.  
Make sure that water cannot get into  
the electronic unit or into the  
lighting.  
^ After washing, wipe down the interior  
and accessories with a clean wet  
cloth, then dry with a soft cloth.  
Leave the appliance doors open for a  
short time, so the moisture can  
Do not let water get into the  
drainage channel or drain hole when  
cleaning.  
evaporate Clean the appliance door  
with a proprietary glass cleaner.  
Do not use steam cleaning  
equipment to clean the appliance.  
Steam could reach the electrical  
components and cause a short  
circuit.  
Ventilation slits  
^ The ventilation slits should be  
cleaned regularly with a brush or  
vacuum cleaner. A build-up of dust  
will increase the energy consumption  
of the appliance.  
The data plate located inside the  
appliance must not be removed. It  
contains information that will be  
required in the event of a Service  
call.  
20  
Cleaning and care  
Door seal  
After cleaning  
^ Replace all shelves in the appliance.  
Do not use any oils or grease on the  
door seal as these will cause the  
seal to deteriorate and become  
porous over time.  
^ Insert the plug in the power outlet  
and turn the appliance back on.  
The door seal should be cleaned  
regularly with clean water, then wiped  
dry with a soft cloth.  
Active charcoal filter  
Replace the active charcoal filters with  
new ones once a year. These are  
available from Miele.  
^ Turn the filters 90° clockwise or  
counter-clockwise.  
^ Remove the filters.  
^ Insert the new filters with the handle  
in the vertical position.  
^ Turn the filters 90° clockwise or  
counter-clockwise until they click into  
position.  
21  
Problem-solving guide  
. . . the alarm sounds and the  
temperature display flashes.  
Repairs should only be carried out  
by a qualified and trained person in  
strict accordance with local and  
national safety regulations.  
^ Has the appliance door been open  
for longer than 60 seconds?  
Unauthorized repairs could cause  
personal injury or machine damage  
and may void the warranty.  
If not, then the temperature is above or  
below the set temperature. Possible  
reasons:  
^ The appliance door has been  
opened too frequently.  
With the aid of the following guide  
minor problems can be corrected  
without a service call.  
^ the ventilation slits are covered.  
^ there has been a lengthy interruption  
to the power supply.  
What to do if . . .  
. . . the appliance does not get cool.  
Once the problem has been resolved  
the temperature display will light up  
continuously, and the alarm will stop.  
^ Check whether the appliance has  
been turned on. The temperature  
display must be lit up.  
. . . a bar is lit up or flashing in the  
temperature display.  
^ Check that the plug is correctly  
inserted in the power outlet.  
Only temperatures within the range that  
the appliance can display will be  
shown. If the temperature is not within  
this range, a bar will be displayed  
instead.  
^ Check that the fuse is not defective  
and has not been tripped. Reset the  
cicrcuit breaker.  
. . . the appliance is kicking on too  
frequently and for too long.  
. . . "F0" or "F1" appears in the  
temperature display.  
^ Check whether the ventilation slits  
are covered or dusty.  
There is a fault. Contat MieleCare.  
^ The appliance door has been  
opened too frequently.  
. . . you cannot turn the appliance off.  
The safety lock has been activated.  
^ Check that the door has been closed  
properly.  
22  
Problem-solving guide  
. . . the interior light is not working.  
Contact MieleCare.  
If, after following these suggestions,  
you still cannot remedy the fault,  
please contact MieleCare.  
To prevent unnecessary loss of  
temperature it is advisable not to  
open the door while waiting for the  
appliance to be serviced.  
23  
Noises  
Normal noises  
What causes them?  
Brrrrr...  
Humming noise made by the motor (compressor). This noise  
may get louder for brief periods, whenever the motor kicks in.  
Blubb, blubb....  
Click....  
A gurgling noise can be heard when coolant is circulating  
through the pipes.  
Clicking sounds occur whenever the thermostat switches the  
motor on or off.  
Sssrrrrr....  
In multi-zone and frost-free appliances, the movement of air  
circulating through the appliance can sometimes just barely be  
heard.  
Please bear in mind that a certain amount of noise is unavoidable (from the  
compressor, and the coolant circulating through the system).  
Noises that you can  
easily rectify  
What causes them, and what can you do about  
them?  
Rattling, vibrating  
The appliance is uneven: Balance the appliance using a level,  
and by raising or lowering the screw feet underneath the  
appliance, or placing something underneath them.  
The appliance is touching another appliance or piece of  
furniture: Move it away.  
Drawers, baskets, or shelves are unstable or sticking:Check all  
removable items and refit them correctly.  
Bottles or containers are unstable or knocking against each  
other: Separate them.  
The transport cable clips are hanging loose at the back of the  
appliance: Remove the clips.  
24  
After sales service  
In the event of a fault which you cannot  
easily fix yourself, please contact the  
Miele Technical Service Department at  
the address on the back of this booklet.  
When contacting the Technical Service  
Department, please quote the model  
and serial number of your appliance  
given on the data plate inside the  
appliance.  
25  
26  
Installation instructions  
To prevent accidents  
and machine damage  
read these instructions  
before  
installation or use.  
Electrical connection  
The appliance comes with a UL-listed,  
3-wire power supply cord.  
,Avoid the risk of electrical shock  
- Plug into a grounded 3-prong  
outlet.  
The appliance requires a 3-wire  
receptacle.  
- Do not move the ground plug.  
- Do not use an adapter.  
- Do not use an extension cord.  
The receptacle must be installed by a  
licensed electrician only.  
In the case of side-by-side installations,  
a separate outlet must be used for each  
appliance. Ideally, the power outlet  
should be next to the appliance and  
easily accessible. Do not connect the  
appliance to the power supply by an  
extension cord. Extension cords do not  
guarantee the required safety of the  
appliance (danger of overheating).  
Failure to follow these instructions  
can result in death, fire, or electrical  
shock.  
Improper connection of the  
equipment grounding conductor  
may result in electric shock. If you  
are in any doubt as to whether the  
appliance has been properly  
grounded, have the appliance  
checked by a qualified electrician or  
service technician.  
If any changes are needed to the  
household wiring or power supply, this  
work must be performed by a qualified  
electrician.  
Installation, repairs and other work  
by unqualified persons could be  
dangerous. The manufacturer will  
not be held responsible for damage  
or injury arising from unauthorized  
work.  
Before installing the appliance,  
verify that the voltage, load and  
circuit rating information found on  
the data plate match the household  
electrical supply.  
If there are any questions regarding the  
electrical connection of this appliance  
to the power supply, please consult a  
licensed electrician or call the Miele  
Technical Service.  
V1-800-565-6435  
28  
Installation  
This appliance must be built in;  
otherwise it could tip over.  
Climate range  
Ambient room  
temperature  
SN  
N
+10°C to +32°C  
+16°C to +32°C  
+18°C to +38°C  
+18°C to +43°C  
+10°C to +38°C  
+10°C to +43°C  
ST  
To ensure that the appliance  
functions correctly in tropical  
climates where the ambient  
temperature exceeds 38°C and air  
humidity levels exceed 70%, the  
appliance MUST be used in a  
climate-controlled room.  
T
SN-ST  
SN-T  
If the appliance is used in a room that is  
too cold, the cooling system will switch  
off for too long, causing the internal  
temperature in the appliance to rise,  
with the risk of affecting the wine stored  
there.  
Location  
The appliance should be installed in a  
dry, well-ventilated room.  
Ventilation  
The room temperature should not go  
above or below the climate range for  
which the appliance is designed.  
The higher the ambient temperature of  
the room, the more energy the  
appliance requires to operate.  
The appliance should not be installed  
where it will be exposed to direct  
sunlight or directly adjacent to a  
heat-producing appliance such as an  
oven or a radiator.  
The air at the back of the appliance  
gets warm. The appliance housing unit  
must be constructed to allow sufficient  
space for ventilation.  
The air intake and outlet must not be  
covered or blocked in any way.  
They should be dusted on a regular  
basis.  
Before installation  
Climate range  
^ Before building in, remove all  
accessories from the appliance.  
The appliance is designed for use  
within certain climate ranges (ambient  
temperatures), and should not be used  
outside this range. The climate range of  
the appliance is stated on the data  
plate inside the appliance.  
^ Remove any cable clips from the rear  
of the appliance.  
^ Check that all parts at the back of the  
appliance are unhindered. Carefully  
remove any hindrances.  
29  
Changing the door hinging  
The appliance is supplied right-hand  
hinged. If left-hand door hinging is  
required, follow the instructions below.  
^ Unscrew the top hinge plate e, turn  
it around, and refit it on the opposite  
side.  
^ Close the door, and unscrew the top  
hinge pin from the door a.  
^ Unscrew the lower hinge plate f.  
^ Remove the hinge pin g, and  
replace it in the hinge plate from  
underneath. Ensure that the spacer  
on which the hinge pin sits is  
correctly positioned.  
^ Unscrew the door stay b from  
underneath the door.  
^ Tip the door forward slightly c, and  
lift it up and off d.  
^ Turn the hinge plate around, and refit  
it on the opposite side.  
30  
Changing the door hinging  
^ Swap over the plug h and the hinge  
pin guide i in the top of the door.  
^ Hang the door on the lower hinge pin  
j, and close the door k.  
^ Refit the top hinge pin l through the  
hinge pin plate into the door.  
^ Refit the door stay m underneath the  
appliance by securing one screw into  
the appliance door and another  
through the plastic part of the hinge  
pin plate.  
31  
Under-counter installation  
Appliance dimensions  
Preparing the appliance  
^ With two people, carefully tip the  
appliance backward.  
^ Attach the supplied trim panel a  
below the appliance, and loosely  
tighten the screws b.  
^ Arrange the trim panel a over the  
long holes in the appliance door  
recess.  
* The overall height can be increased by 2  
inches (50 mm) by adjusting the feet.  
^ Tighten the screws b all the way  
down onto the trim panel a.  
Adjustments  
^ Use the flat wrench provided to  
adjust the feet as needed, so that the  
appliance fits the countertop height.  
32  
Under-counter installation  
Fitting the appliance into place  
^ Slide the appliance into the  
installation area.  
Ensure that the power cord does not  
get caught.  
Make sure the power socket remains  
accessible.  
^ Using the attachment strip and  
screws, fit the appliance into place.  
33  
34  
35  
Subject to change without notice / 3208  
KWT 4154 UG-1  
M.-Nr. 06 873 220 / 00  

Panasonic High Definition Video Camera HC V210 User Manual
Panasonic AJ D610WBp User Manual
Orion eViewTM 8x32 LCD User Manual
Motorola Cable Box DCX3200 User Manual
Mamiya Boiler C32 User Manual
LG Electronics LG Lifes Good Car Video System M2762D User Manual
Kodak 35 mm Camera User Manual
Kodak 9E9893A User Manual
Kicker KS25 User Manual
Kenwood DDX7017 User Manual