Lanzar Car Audio SD34MIP User Manual

R
SD34MIP  
CAR DVD/VCD/CD/MP3/MPEG-4 PLAYER WITH  
USB PORT/I-POD ANDAM/FM TUNER  
00  
Contents  
Pause the Playback 33  
Changing Audio Language(Multi-audio) 33  
File Selector 33  
Eject a Disc 33  
Slow Motion Playback 33  
Picture Sizes 33  
On-Screen Display 33  
Number Buttons 34  
Setting the Playback Time 34  
MO/ST Selector 34  
Tuner  
Band Selector 38  
Manual/Automatic Tuning 38  
Selecting the Station 38  
DX/LOC Selector 38  
8
MO/ST Selector 38  
On-screen Display 38  
Scanning/Memorizing Stations  
Automatically 39  
Number Buttons 39  
Selecting Station Directly 39  
Radio Menu 40  
Program Playing 34  
Playing PBC (Menu) 34  
To Capture Picture 35  
Exit an USB 35  
Exit a SD Card 35  
9
Additional Information  
Simple Troubleshooting Guide 41  
7
IPOD  
IPOD play 36  
Playing the Previous/Next Track 36  
Playing the Track F.F/F.REW 36  
Repeat Playing 36  
Playing Tracks in Random Order 36  
Pause the Playback 36  
On-Screen Display 36  
Tracks Selector 37  
Back to Root Directory 37  
Back to the previous Directory 37  
Video or Picture Mode 37  
Exit IPOD 37  
3
09  
Before You Start  
Additional Information  
About this manual  
IMPORTANT SAFEGUARDS  
Simple Troubleshooting Guide  
The following checklist might help to solve the problems which you meet when using  
the unit. Please double check and make sure if the connection and the procedure of  
the operation is properly before using the checklist below .  
1. Be sure to connect the color coded  
leads according to the diagram.  
Incorrect connections may cause  
the unit to malfunction or damage  
the vehicle, s electrical system.  
This unit features a number of sophisti-  
cated functions ensuring superior  
operation. All the functions have been  
designed for the easiest possible use,  
but many are not self-explanatory. This  
manual will help you understand the  
functions and operations of the unit.  
This manual main explains remote  
control operation. However, in  
Cause/Solution  
Problem  
.
.
No power.  
2. Be sure to connect the speaker (-)  
leads to the speaker (-) terminal.  
Never connect the left and right  
channel speaker cables each other  
or to the vehicle body.  
Check and make sure whether the fuse is blown,  
replace with the proper value if necessary.  
Some errors occur in the  
LCD or no function when  
pressing the button.  
Press RESET button.  
3. Make sure all the connections are  
completely correct before turning  
on your unit.  
addition to those functions related with  
DVD/VCD/CD/MP3/MEPG-4/USB  
operation that can only be operated by  
the remote control, there are also  
functions can be operated by the buttons  
provided for the main unit.  
.
Check and make sure whether the antenna is  
inserted or the antenna is properly connected, if  
not, insert the antenna or connect it properly.  
Unable to receive stations.  
4. When replacing the fuse(s), the re-  
placement must be of the same am-  
perage as shown on the fuse holder.  
.
.
Antenna may not be the proper length. Make sure  
the antenna is fully extended; if broken, replace  
the antenna with a new one.  
Poor effect on receiving a  
station.  
5. Do not block vents or radiator pa-  
nels. Blocking them will cause heat  
to build up inside and may result in  
fire.  
The antenna is poorly grounded, check and make  
sure the antenna is properly grounded at its  
mounting location.  
6. After completing the installation and  
beginning to play the unit(including  
replacing the battery), please remove  
the front panel at first, and then press  
RESET button on the base with  
.
.
.
CDs cannot be loaded.  
Sound skips.  
A CD is loaded in the mechanism.  
The CD is dirty or damaged.  
pointed object (such as ball-point  
pen) to set the unit to initial status.  
No images.  
The Video line from main unit to the TVis not  
connected properly.  
.
Improper setting of the color system. Set the color  
system to PAL or NTSC according to the  
connected television.  
Images skip.  
Note:  
If any of the problem persist after check list had been made, consult your nearest service dealer. Never  
attempt to disassemble your unit by yourself.  
Due to continuous product improvement, the operations  
are subject to run the model.  
41  
01  
08  
Tuner  
Before You Start  
Radio Menu  
LOCAL  
PRECAUTIONS  
21  
Press SETUP button, the monitor shows  
the radio setup menu, you can press  
[ ][ ][ ] to select your desired item, then  
press ENTER on the remote control. Press ,  
or to select EXIT, then press ENTER to  
exit the setup.  
RADIO MENU  
This unit can play the following discs only:  
22  
[ ]  
AREA  
EUROPE  
ON  
Label on the disc  
Recorded material  
Size of disc  
STEREO  
LOCAL  
Type of disc  
DVD  
OFF  
Sound and moving  
pictures  
PICTURE PRESET  
EXIT  
12cm  
Note:  
Rotate VOL and briefly press it on the head  
Sound and moving  
pictures  
*
VCD  
CD  
12cm  
12cm  
12cm  
12cm  
unit also performs the same function.  
Press[ ]or [ ] to select LOCAL, then  
press ENTER, the setting menu appears as  
follow:  
Press [ ] [ ] to select your desired item.  
In this menu to search the LOCAL stations,  
when selected ON, the strong signal local  
stations can be received, when selected OFF,  
the week signal out-of-town stations may  
be received.  
Sound only  
Sound only  
AREA  
RADIO MENU  
MP3  
AREA  
EUROPE  
ON  
Sound and moving  
pictures  
STEREO  
LOCAL  
MPEG-4  
USB  
OFF  
MPEG-4  
PICTURE PRESET  
EXIT  
Sound and moving  
pictures  
Version 2.0  
and less  
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.  
Picture  
Press[ ]or [ ] to select AREA, then press  
ENTER, the setting menu appears as follow:  
Press [ ] [ ] to select your desired item.  
You can select EUROPE or USAor FM  
ONLYto search the stations quickly by your  
current area.  
RADIO MENU  
Do not attempt to modify the unit,  
modifying the unit may cause an  
accident.  
Do not use your CDs with paste residue  
or ink attached.  
AREA  
EUROPE  
ON  
STEREO  
LOCAL  
PICTURE  
LOCAL  
PRESET  
Stop the vehicle before carrying  
out any operation that could  
interfere with your driving.  
EXIT  
Note:  
Do not use CDs with labels or stickers  
attached, which may leave a sticky residue  
while beginning to peel off.  
*
Russian frequency not this item  
Do not work in extremely high or  
low temperature. Be sure the  
temperature inside the vehicle  
is between +60 C and -10 C  
before turning on your unit .  
STEREO  
Press[ ]or[ ] to select PICTURE, then  
press ENTER, the setting menu appears as  
follow:  
Press [ ] [ ] to select your desired item.  
CAPTURED the captured picture set for  
the wallpaper  
RADIO MENU  
(Shown as the picture)  
AREA  
EUROPE  
ON  
STEREO  
LOCAL  
OFF  
To enjoy optimum sound and  
images while playing, handle the  
discs as follows:  
PICTURE PRESET  
EXIT  
PRESET the initial wallpaper  
Clean the discs with an optional clean-  
ing cloth. Wipe each disc from the center out.  
(Shown as the picture)  
Press[ ]or [ ] to select STEREO, then  
press ENTER, the setting menu appears as  
follow:  
Press [ ] [ ] to turn STEREO on or off  
then press ENTER.  
Handle the disc by its edge to keep  
the disc clean, and do not touch  
the surface.  
40  
5
08  
Tuner  
Before You Start  
Scanning/Memorizing Stations  
Automatically  
Selecting Station Directly  
Maintenance  
2
Press GOTO button, the monitor shows:  
FR:, input the number to receive the station  
of this frequencies.  
4
During radio status, you can press  
AMS  
button on the remote control to scan each  
stored station 5 seconds respectively which  
24  
stored in Number Buttons (from 1 to 6).  
You can press the corresponding Number  
Buttons or AMS button when your desired  
station is charged. And it starts playing that  
station.  
Replacing the Fuse  
Note:  
*
This function is only operated by using rem-  
ote control.  
Makesuretheamperagematchesthe  
specifiedvaluewhenreplacingthefu-  
ses.Ifthefuseisblown,checkthepo-  
werconnectionandreplacewithan-  
ewone.Ifthesameproblemoccurs,  
itwouldbesubjectedtothemalfun-  
ction.Insuchcases,pleaseconsult  
tothenearestservicedealer.  
Insert the Battery Holder into the Remote  
Control.  
4
When press and hold AMS button, it will  
activate automatically memory storing fun-  
ction. The radio automatically selects a  
station and has it stored in any one of the  
Number Buttons from 1 to 6.  
Notes:  
Press AMS on the head unit also performs  
the same function.  
The unit can be stored up to 6 stations for  
each band.  
Regarding the function of Number Buttons,  
refer to Number Buttons for more inform-  
ation.  
*
*
*
!
Warning  
Neverusethefusewiththerated  
amperagemorethanthatsuppliedto  
yourunit,otherwiseitwilldamagethe  
unit.  
PrecautionsonUsingLithium  
Battery  
Alwayskeepthelithiumbatterybeyond  
children sreach.Incase  
swallowed,seeadoctorimmediately.  
Number Buttons  
During radio mode, Number Buttons  
Replacing the Battery  
24  
from 1 to 6  
can help you store your  
Cleaningthebatterywithadrycloth,  
toensureitsperfectconnected.  
favorite station. You can follow the steps  
as below:  
Whentherangeoftheoperationofthe  
cardremotecontrolbecomesshortorno  
functionswhileoperating.Replacethe  
lithiumbatterywithanewbuttoncell  
(CR2025).Makesurethebatterypolarity  
beforereplace.  
When receiving a station, press and hold  
any one of the Number Buttons until CH i  
(i=1~6) appears on the LCD, which in-  
dicates that station is already stored in the  
corresponding number button.  
You can store up to 18 FM stations (6 each  
for FM1,FM2,FM3),up to 12AM stations  
(6 each for AM1/MW andAM2/LW).  
Makesuretheproperpolaritywhen  
loadingwiththebattery.  
Topreventshortcircuit,donotuse  
metaltweezertoclipthebattery.  
!
Warning  
Improperhandlewiththebattermay  
leadtoexplosion.  
Gently pull out the Battery Holder while  
pressing the Stopper.  
Note:  
*
This function is only operated by using rem-  
ote control.  
Itcannotbecharged,disassembled  
orthrownintoafire.  
Putthebutton-typebatterywithmark(+)  
upwardintotheBatteryHolder.  
6
39  
01  
08  
Tuner  
Before You Start  
Band Selector  
DX/LOC Selector  
Location of the Controls  
3
During radio status, repeatedly press  
BAND button to select bands in the  
following order:  
5
During radio status, press  
LOC button on  
the remote control to select strong or weak  
station reception.  
Front Panel  
FM1  
FM3  
FM2  
5
It is set to LOC mode when  
LOC button  
1
is first pressed. LO appears on the  
display and only local station is available.  
MW2(AM2)  
MW1(AM1)  
6
1
3
4
9 18 11  
2
(For Two Bands)  
5
It is switched to DX mode when  
LOC  
2
FM1  
LW  
(For Three Bands)  
FM3  
FM2  
is pressed again. Both distance and local  
stations can be received.  
MW  
Notes:  
Note:  
*
The initial mode is DX mode.  
*
Press LOC on the head unit or set LOCAL  
in RADIO MENU also performs the same  
function.  
8
*
Press  
the same function.  
button on the head unit also performs  
Manual/Automatic Tuning  
MO/ST Selector  
22  
or )button on the remote control con-  
tinuously to select a station downward or  
upward respectively.  
Manual Tuning: Repeatedly pressing  
(
6
During radio status, you can press  
button on the remote control to select Mono  
mode or Stereo mode.  
ST  
12  
7 8 17 1415  
5
1
Stereo reception is charged when ST  
appears.  
Base  
Automatic Tuning: Press 22 ( or ) button  
for more than 3 seconds, the radio automati-  
cally searches a station downward or upward  
respectively and plays when it finds a station.  
2
It is switched to MONO mode when  
MO appears.  
Note:  
13 10  
16  
19  
Note:  
*
To set STEREO in RADIO MENU also  
performs the same function.  
12  
Press button on the head unit also performs  
the same function.  
*
On-screen display  
Selecting the Station  
8
Briefly press  
OSD to show the RDS  
22  
to select the  
to select the down-  
During radio mode, press  
upward station, press  
ward station.  
menu, press and hold it to display the  
current source information.  
Note:  
Note:  
*
This function is operated by using the remote  
control.  
*
First press AMS on the head unit , and then  
12  
press button on the head unit also performs  
the same function.  
38  
7
07  
IPOD  
Before You Start  
Exit IPOD  
1 MOD/ button  
Tracks Selector  
10  
RESET button  
Press this button to turn on the unit,  
when the unit on, briefly press it to  
set mode, hold and press it to turn off.  
Press to set the unit to initial status.  
22  
During IPOD mode, to take IPOD out, the  
main unit will switch to radio mode.  
During other mode, to take IPOD out, the  
main unit will keep the original mode.  
Press  
to select the previous track,  
press to select the next one, then press  
ENTER to play.  
11 EQ button  
Briefly press it to select the different  
frequency automatically.  
Press to select the previous 5 tracks,  
press to select the next 5 tracks, then press  
22  
2
(REL) button  
Press to release the front panel.  
ENTER to play.  
2
12  
/
button  
Press  
numbers to play the desired track.  
GOTO to display : ---, input the  
3 VOL button  
During radio mode, press it to select  
the stations; during playback mode,  
press it to select tracks; during IPOD  
mode press it to select the previous or  
next 5 tracks.  
Rotate (VOL) button clockwise to incr-  
ease the volume level; and rotate(VOL)  
button anticlockwise to decrease the  
volume level. Briefly press it to set the  
volume characteristics; press and hold  
it to show the system menu;rotate it to  
set the item.  
Note:  
12  
button on the head unit also performs  
*
Press  
the same function.  
13  
EJECT button  
Press it to eject the disc.  
Back to Root Directory  
4
LCD (LIQUID CRYSTAL DISPLAY)  
To display current status.  
4
During IPOD mode, press  
back to the root directory.  
Root to go  
14 LOC button  
During radio mode, press it to select  
the distant or local station.  
5
6
USB Socket  
AMS button  
Back to the Previous Directory  
LOUD(loudness)button  
15  
5
During IPOD mode, press  
to the previous directory.  
to go back  
Briefly press it to activate LOUD fun-  
ction.  
During radio mode, briefly press it to  
adjust the storaged stations; press and  
hold it to memory stations automatically.  
First press it, then press  
stations.  
During playback, press it to activate the  
repeat play function.  
to select  
/
16  
17  
18  
Disc Loading Slot  
A/V In  
Video or Picture Mode  
6
During IPOD mode, press  
Video to  
select video or audio. Video and picture can  
be played at this time.  
The unit and the remote control can not be  
operated in this mode, you can just operate  
IPOD to select video and picture.  
MUT button  
7
Infrared Sensor  
Press it to switch the audio between  
mobile phone and main unit.  
8 BND/  
(BAND/PAUSE,PLAY) button  
During radio mode, press it to select  
different bands.  
Note:  
19  
SD Card Socket  
*
*
This function is operated by using remote  
control only.  
During playback, press it to play or  
pause play, press and hold to stop play.  
The IPOD TV should be set ON in this  
function.  
9
/
(Stop/Mode display)  
Briefly press it to stop playing; press  
and hold it to select the day mode or  
night one.  
8
37  
01  
07  
IPOD  
Before You Start  
Playing Tracks in Random Order  
IPOD play  
Card Remote Control  
17  
During IPOD playback, when pressing  
RDM button, Shuffle off, Shuffle Track,  
Shuffle Album will be activated.  
During IPOD playback, connect the IPOD  
wire(5V) to the one in backside of main unit.  
The unit will play track in IPOD.  
Note:  
*
This function is operated by using the remote  
control only.  
Playing the Previous/Next Track  
During IPOD playback, press  
9
to play  
to play the  
9
the previous track, press  
next track.  
Pause the Playback  
Note:  
18  
During playback, press  
button to pause  
*
This function is operated by using the remote  
control only.  
the playback, Press it again to return to nor-  
mal playback.  
Note:  
Pressing  
on the head unit also performs  
8
*
Playing Track F.F/F.REW  
the same function.  
Press  
or  
to play the track fast for-  
20  
ward or fast rewind . Press it again or press  
ENTER to resume to play normally.  
On-screen display  
Note:  
8
During IPOD playback, hold and press  
OSD button to display the current source  
information.  
*
This function is operated by using the remote  
control only.  
Note:  
*
This function is operated by using the remote  
control.  
Repeat Playing  
16  
During playback, press  
RPT to track  
repeat, disc repeat, off. Press it again to  
cancel this function.  
Tips:  
For more information as to replacing battery, please refer to Replacing the Battery  
on page 6.  
Note:  
Pressing AMS on the head unit also performs  
*
the same function.  
36  
9
06  
VCD/CD/MP3/MPEG-4/USB/SD  
Before You Start  
PWR (turn on/off) button  
RPT (repeat play) button  
RDM (play at random) button  
(Play/pause) button  
To Capture Picture  
During MP3/USB/SD mode, when to scan  
the picture, hold and press [P/N]/ bu-  
tton to capture the current picture, and set it  
to wallpaper  
GOTO(time,track) button  
BAND/TITLE (band selection/ title  
menu) button  
/
switch) button  
(Stop play/ To display mode  
Note:  
AMS/MENU/Root (preset stations,  
memory automatically/menu/back to  
root directory) button  
*
This function is operated by using remote  
control only.  
(F.REW/F.F) button  
/
Exit an USB  
LOC/  
/SUB-T (long distant or local  
SETUP (setup) button  
station in radio mode/ back to last level  
in IPOD mode/ subtitle display) button  
During USB mode, the main unit would  
switch to TUNER mode directly when exit  
the USB.  
During other modes, the main unit will keep  
the previous mode when exit the USB.  
ENTER(Left/Right/Up/Down  
ENTER)  
ST/AUDIO/Video (stereo or mono se-  
lection/language or audio switch/ video  
or audio switch in IPOD) button  
CLEAR (clear)button  
0~9 (number) button  
MODE (mode switch) button  
Note:  
ANGLE (play angle) button  
Please fill the rubber installs after exiting  
USB .  
OSD (current display) button  
Briefly press it to display the current  
information; press and hold it to display  
the current setup.  
LOUD(loudness) button  
EQ (equalizer) button  
Exit a SD Card  
Push SD card to exit it.  
During SD mode, the main unit would  
switch to TUNER mode directly when exit  
the SD.  
During other modes, the main unit will keep  
the previous mode when exit the SD.  
(Previous/next track) button  
/
ZOOM (briefly press it to zoom in or  
out/ hold and press it to adjust video  
display screen) button  
(slow play) button  
[P/N]/  
button  
(system adjustment/capture)  
PROG (program play) button  
(Mute) button  
VOL+/VOL-/SEL (volume adjust/sound  
characteristics setup) button  
10  
35  
01  
06  
VCD/CD/MP3/MPEG-4/USB/SD  
Before You Start  
Program Playing  
Number Buttons  
During playback, you can select any track  
Specifications  
During VCD/CD mode, press 13 PROG, the  
TFT displays the program menu. Pressing  
NUMBER BUTTONS to select the track  
Number and then press 22 to move the cursor  
to START, press ENTER to start program  
playing; move the cursor to EXIT and press  
ENTER to exit the program playing. Move  
directly by using  
Number Buttons( 0~9).  
24  
The selected track will be played automati-  
cally.  
General  
AM Tuner Section  
Note:  
Frequency Range  
(Optional)  
Power Requirement  
14.4V DC  
522-1620(KHz)  
*
This function is operated by using remote  
control only.  
(11-16V allowable)  
(Europe/Russia)  
the cursor to  
previous page; move the cursor to  
press ENTER to the next page.  
and press ENTER to the  
and  
Load Impedance  
530-1710(KHz)  
(U.S.A.)  
Setting the Playback Time  
2
Max.Power Output  
Tone Controls  
During CD playback, first press  
GOTO,  
80W X 4  
During this process, press  
or PROG  
19  
IF Range  
450KHz  
35dBuV  
and TFT shows : disc go to:--:--,press your  
desired time of the playback by using num-  
ber buttons. Secondly press GOTO button,  
track go to:--:-- appears on TFT, also input  
your desired numbers to play the current  
time of your selection.  
to cancel the program playing.  
10dB  
Usable Sensitivity  
(-20dB)  
Note:  
Bass100Hz  
Treble10KHz  
The function is only valid on remote control.  
*
Approx.192x178x50  
mm  
(d/w/h)  
Dimensions  
Playing PBC (Menu)  
During VCD mode, press 2 GOTO button  
to set the playing time, when the TFT dis-  
play : track/disc time/track time/repeat/time  
CD Player Section  
3
During VCD status, first pressing TITLE,  
PBC playback starts and the menu of entire  
disc appears on the monitor. And then you  
can select your favorite track by using  
24  
Number Buttons. When a track is playing,  
Approx.169X182X53  
(d/w/h)  
Mounting  
Dimensions  
mm  
Approx.1.75kg  
VCDSignalSystem  
PAL/NTSC  
disp. Press  
press ENTER to set the status.Then press  
[
][ ] to select the options,  
24  
Signal-to-noise Ratio  
Separation  
60dB  
Weight  
NUMBER BUTTONS or  
the current status.  
[
][ ] to set  
55dB(1KHz)  
0.1%  
4
you can press MENU button to return to  
the menu if you would like to end the track  
and select others. To cancel PBC playing,  
Distortion  
2
During MP3/USB/SD mode, press GOTO  
FM Tuner Section  
first to display : ---/all track, input the  
numbers to play the desired track. Press  
second : --:-- to adjust the playing time.  
3
press  
TITLE button again.  
2
DVD Player Section  
Note:  
This function is operated by using the remote  
control.  
87.5-108(MHz)  
Tuning Range  
(Optional)  
*
*
(Europe)  
During MPEG-4 mode, press GOTO first  
to display : select:---, input the numbers to  
play the desired track. Press GOTO seco-  
ndly : time-:--:-- to adjust the playing time.  
Numberofchannel  
2 channels  
87.5-107.9(MHz)  
(U.S.A.)  
PBC playing confirms to version 2.0 of SVCD/  
VCD disc only.  
Frequency Response  
Dynamic Range  
5Hz to 20,000Hz  
98dB  
65-74(MHz)  
Russia)  
Note:  
*
This function is operated by using remote  
control only.  
Signal-to-Noise Ratio  
Wow and Flutter  
60dB  
IF Range  
10.7MHz  
Less than  
measurable limit  
10dBuV  
Usable Sensitivity  
(-30dB)  
MO/ST Selector  
6
During VCD playing, repeatedly press  
AUDIO button to select the mode as bellow:  
Signal-to-noise Ratio  
Stereo Separation  
60dB  
Note:  
Mono right  
Mono left  
Stereo  
30dB 1KHz  
30-15000Hz  
Due to continuous product improvement,  
specifications and design are subject to  
change without prior notice.  
Note:  
This function is operated by using the remote  
control.  
Frequency Response  
*
34  
11  
06  
02  
VCD/CD/MP3/MPEG-4/USB/SD  
Installation  
Pause the Playback  
Slow motion playback  
Wiring Connection  
9
18  
11  
During VCD mode, press  
to slow  
During playback, press  
button to pause  
IPOD link wire White +5V  
3
4
Antenna  
Black  
Grey  
forward or slow backward. There are such  
speeds each pressing decreases the speed  
until the minimum speed is reached.  
the playback, Press it again to return to nor-  
mal playback.  
L white  
Yellow  
1
Front RCA Dark Grey  
Video Out  
Note:  
R red  
8
Yellow  
Brown  
*
Briefly press  
button on the head unit also  
L white  
8
Subwoofer  
Brown  
performs the same function.  
2
Light Grey  
Rear RCA  
Note:  
Yellow  
Yellow  
7
Reversing Video In  
R red  
Brown  
Black  
Changing audio language  
(Multi-audio)  
L white  
*
This function is operated by using the remote  
control.  
10  
(Optional)  
AUX In  
Black  
(Optional)  
11  
Video In  
R red  
MPEG-4 can provide audio playback with  
different language. With discs featuring  
Picture Sizes  
10  
During VCD/MPEG-4 mode, press  
ZOOM to increase the picture in size.  
There are such sizes as following:  
6
multi-audio recordings,repeatedly press  
AUDIO to switch between language and  
audio systems during playback.  
5
7
2X  
3X  
4X  
6
Selection options switch as follows:  
NoChange  
AUDIO 1  
AUDIO 2  
AUDIO 3......  
Note:  
Note:  
*
*
This function is operated by using the remote  
control.  
*
This function is operated by using the remote  
control.  
This function only operates with MPEG-4  
Orange  
Reverse Gear  
Ignition Key  
22  
To perform this function with the  
button.  
Red  
Yellow  
Black  
*
featuring multi-audio recordings.  
FILTER  
&FUSE  
BOX  
Brown  
Blue  
On-screen display  
Parking Brake  
Battery +  
Ground  
2
*
The number in the  
mark on a MPEG-4  
8
8
During VCD/CD playback, briefly press  
OSD, the monitor shows:  
package indicates the number of recorded  
languages/audio systems.  
Antenna  
Power +  
Single elapsed time  
Single remain time  
Violet/Black  
Violet  
Green/Black  
Green  
Rear L  
Speaker  
Rear R  
Speaker  
File Selector  
Total  
elapsed time  
Total  
remain time  
OFF  
During MP3/MPEG-4/USB/SD stop mode,  
press to select file or file document. Press  
22  
ENTER to open it.  
Grey/Black  
Grey  
During MPGE-4 playback, briefly press  
OSD, the monitor shows:  
White/Black  
White  
Front R  
Speaker  
Front L  
Speaker  
Single  
elapsed time  
Single  
remain time  
Note:  
This function is operated by using the remote  
control.  
*
Reversing Video In  
Subwoofer  
1
2
3
4
5
6
7
8
Front RCA  
Rear RCA  
Antenna  
OFF  
Press and hold this button to display the  
current source information.  
Eject a Disc  
9
IPOD link wire  
Note:  
2
First press , then press  
eject a disc.  
13  
button to  
*
This function is operated by using the remote  
control.  
10  
11  
Video Out  
AUX In (Optional)  
Video In (Optional)  
Notes:  
Output Plug (Male)  
This function can only be operated by the head  
unit.  
*
Output Socket (Female)  
12  
33  
02  
06  
VCD/CD/MP3/MPEG-4/USB/SD  
Installation  
System Button  
Playing Discs/USB/SD  
Install the Front Panel  
12  
During VCD playback, press P/N button  
to select standard TV system as following:  
While playing discs, just insert a disc (with  
labeled side up) into the (Disc Loading Slot)  
(Shown as picture), the mechanism will  
automatically switch on. If a disc is loaded,  
(REL)  
button in the upper right  
Put notch (Shown as picture) onto  
Press 2  
AUTO  
NTSC  
A
shaft B . And then slightly press into the  
corner, and then the front panel will be  
PAL  
9
briefly press MODE button to start the  
playing.  
right side.  
folded down.  
Note:  
When playing USB, first unstop the rubber  
plug, then insert USB in USB socket, the  
mechanism will automatically play.  
REL  
*
This function can be operated by selectiong  
the DVD MENU SETUP.  
B
2
When playing SD Card, first press  
REL  
Repeat Playing  
to release the front panel, then insert a SD  
card into the slot, the programs in the card  
will be played.  
16  
During playback , press  
the current track. Press it again to cancel  
this function.  
RPT to replay  
A
Note:  
Pressing MOD on the head unit also performs  
the same function.  
Note:  
Pressing AMS on the head unit also performs  
the same function.  
The default setting is Disc Repeat.  
*
*
When the front panel was turned down  
to a position of 45 , hold and slide the  
front panel to left, and then pull it out .  
Playing the Previous/Next Track  
DuringMP3/USB/MPEG-4/SD playback,  
9
toplaythenexttrack.  
Playing Tracks in Random Order  
press  
9
toplaytheprevioustrack,press  
During VCD/CD/MP3/MPEG-4/SD play-  
17  
9
DuringVCD/CDplayback,firstpress  
toreturntothebeginningofthecurrenttrack,  
press 9 againwithin3secondstoplay  
back, when press  
RDM button , the unit  
plays any track at random under the direct-  
ory which you select. Press RDM again to  
return to normally play.  
previoustrack,press 9  
toplaynexttrack.  
Note:  
Note:  
*
This function is operated by using the remote  
control only.  
12  
*
Briefly press  
button on the head unit also  
performs the same function.  
Stop the playback  
Playing Track F.F/F.REW  
DuringMP3/MPEG-4/USB/SD mode,press  
19  
tostopplaying,pressitagaintoreturn  
tothebeginningofthecurrenttrack.  
Press  
or toplaythetrackfastforward  
20  
orfastrewind:Eachpressing,willchange as  
following:  
19  
DuringVCD/CDmode,first pressing  
to pauseplaying,press 18 toplay,press  
buttontwicetostopplayingcompletely,press  
PLAYbuttontostartplaying.  
2X  
4X  
8X  
16X  
Note:  
Never put any objects into the front panel.  
Note:  
Note:  
8
*
Press and hold  
button on the head unit also  
12  
Press and hold button on the head unit also  
performs the same function.  
*
performs the same function.  
32  
13  
05  
02  
DVD  
Installation  
Installation Method  
DIN Front-Mount  
1
---Preferencespage--  
Default  
Exampleshowinghowtosetloadfactorysetting:  
Bend these claws  
outward for a tight fit,  
if necessary.  
(Press  
,
or ,thenpressENTER)  
--PreferencePage--  
(Press  
--PreferencePage--  
TVType  
Audio  
Auto  
Eng  
Eng  
Eng  
TVType  
Audio  
Auto  
Eng  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Eng  
Eng  
Reset  
GoToPreferencePage  
LoadFactorySetting  
Fire Wall  
To support the unit  
2
Installation Method  
Installation using the screw holes at the  
sides of the unit.  
Bracket ssupplied  
to youur car  
1. Remove the hooks on both sides.  
2. Select a position where the screw holes  
of the mounting bracket supplied with  
the car and the screw holes of the main  
unit become aligned (are fitted), and  
4
tighten the screws (see  
at 2 places  
on each side. And then fasten them to  
the car.  
Dashbboard  
or Connsole  
NOTE:  
5
Outer Trim Frame Hook 9 and  
Mounting Sleeve are not used for installa-  
1
2
tion method  
14  
31  
02  
05  
DVD  
Installation  
---Preferencespage--  
Detach the Unit  
DiscMenu  
ExampleshowinghowtosetDiscMenuLanguage:  
2.Insert the keys supplied to the unit at  
both sides of the unit (shown as illustrat-  
ed) until they click. Pulling the keys  
makes it possible to remove the unit from  
the dashboard.  
Detach the front panel before disassembl-  
ing the unit. For more details regarding  
this section, refer to Detach the Front  
(Press  
,
or ,thenpressENTER)  
--PreferencePage--  
(Press  
--PreferencePage--  
Panel  
.
TVType  
Audio  
Auto  
Eng  
Eng  
Eng  
English  
TVType  
Audio  
Auto  
Eng  
1.Take out the Outer Trim Frame after  
detaching the front panel.  
French  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Eng  
Eng  
Spanish  
Chinese  
Japanese  
Korean  
Russian  
Others  
GoToPreferencePage  
PreferredMenuLanguage  
Parental  
Exampleshowinghowtosetparentalcontrol:  
(Press  
,
or ,thenpressENTER)  
--PreferencePage--  
(Press  
--PreferencePage--  
2
3
4
5
6
7
8
Off  
G
PG  
PG 13  
PGR  
TVType  
Audio  
Auto  
Eng  
Eng  
Eng  
TVType  
Audio  
Auto  
Eng  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Eng  
Eng  
R
NC 17  
Adult  
MainPartsList  
GoToPreferencePage  
SetParentalControl  
Password  
Exampleshowinghowtosetpassword,and thedefaultpasswordis8888.  
M 5 x 5  
Mounting Sleeve x1 Rear Mounting Bolt x1  
(Press  
,
or ,thenpressENTER)  
--PreferencePage--  
(Press  
Harness Rubber x1 4 Screws  
--PreferencePage--  
TVType  
Audio  
Auto  
Eng  
Eng  
Eng  
TVType  
Audio  
Auto  
Eng  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Eng  
Eng  
Change  
Keys x 2  
Connecting Wire x1  
Steel Bar x 1  
Outer Trim Frame x 1  
GoToPreferencePage  
ChangePassword  
30  
15  
05  
02  
DVD  
Installation  
---Preferencepage---  
Cleaning the Connector  
TVType  
ExampleshowinghowtosetTVtype:  
(Press  
If the connector between the main unit and the  
front panel is dirty, it may result in unit s ab-  
normal working condition. To avoid such pro-  
blems happening, please detach the front panel,  
and clean the connector with an alcohol swab.  
Gently clean and avoid damaging the connector.  
,
or ,thenpressENTER)  
--PreferencePage--  
(Press  
--PreferencePage--  
TVType  
Audio  
Auto  
Eng  
Eng  
Eng  
TVType  
Audio  
Auto  
Eng  
PAL  
Auto  
NTSC  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Eng  
Eng  
The main unit  
GoToPreferencePage  
SetTVStandard  
Audio  
ExampleshowinghowtosetAudiolanguage:  
(Press  
,
or ,thenpressENTER)  
--PreferencePage--  
(Press  
--PreferencePage--  
TVType  
Audio  
Auto  
Eng  
Eng  
Eng  
English  
TVType  
Audio  
Auto  
Eng  
French  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Eng  
Eng  
Spanish  
Chinese  
Japanese  
Korean  
Russian  
Others  
GoToPreferencePage  
PreferredAudioLanguage  
The backside of the front panel  
Notes:  
Subtitle  
Exampleshowinghowtosetsubtitlelanguage:  
(Press  
,
or ,thenpressENTER)  
--PreferencePage--  
(Press  
*
For safekeeping, always shut down the generator  
and take out the key from the ignition before cle-  
aning.  
--PreferencePage--  
TVType  
Audio  
Auto  
Eng  
Eng  
Eng  
English  
TVType  
Audio  
Auto  
Eng  
French  
Never keep your finger or any metal device touch  
the connector directly.  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Subtitle  
DiscMenu  
Parental  
Password  
Default  
Eng  
Eng  
Spanish  
Chinese  
Japanese  
Korean  
Russian  
Others  
GoToPreferencePage  
PreferredsubtitleLanguage  
16  
29  
03  
05  
Common Operations  
DVD  
Reset the Unit  
Setting the Sound Characteristics  
15  
--DolbyDigitalSetup--  
Repeated pressing SEL button to select  
Operating the unit for the first time or after  
replacing the car battery, you must reset  
the unit.  
the desired mode in the following order:  
VOL  
BAL  
FAD  
TRE  
BAS  
DualMono  
Exampleshowinghowtosetstereomode:  
(Press  
Release the front panel at first, and then  
Press 10 RESET button on the base with  
a pointed object, (such as a ballpoint pen)  
to set the unit to initial status.  
,
or ,thenpressENTER)  
--DolbyDigitalSetup--  
(Press  
1
2
After selecting the desired mode, you  
can adjust the current level by pressing  
--DolbyDigitalSetup--  
DualMono  
Dynamic  
DualMono  
Dynamic  
Stereo  
Note:  
15  
VOL buttons.  
L-Mono  
R-Mono  
Mix-Mono  
* When some errors occur on the display, you can  
also press RESET button to resume to normal,  
and it will erase the clock setting and some me-  
morized functions.  
,
If you dont adjust  
15  
VOL buttons wi-  
thin 3 seconds after selecting the desired  
mode, the unit will automatically return  
to the current mode being displayed.  
*
This function can only be operated by the  
head unit.  
GoToDolbyDigitalSetup  
DualMono(1+1)Setup  
Note:  
Turning the Unit On/Off  
*
Pressing SEL and rotating VOL button on the  
head unit or set AUDIO SETUP in MAIN  
MENU also performs the same function.  
1
Press PWR button to turn on the unit,  
press it again, the unit is still in the waiting  
status. When insert a disc, the unit will au-  
tomatically start playing. Keep pressing it  
to turn off the unit completely.  
Dynamic  
Exampleshowinghowtosetdynamicrangecompression:  
EQ Setting  
(Press  
,
or ,thenpressENTER)  
--DolbyDigitalSetup--  
(Press  
While listening to the popular music, classic  
music or rock music, you can select the co-  
rresponding preset modes to adjust the sound  
--DolbyDigitalSetup--  
Note:  
*
During waiting status, briefly press PWR on  
the head unit to turn on the unit, press and hold  
it to turn off the unit.  
DualMono  
Dynamic  
DualMono  
Dynamic  
quality perfectly by using  
EQ button.  
27  
EQ button to choose  
the following modes in turn:  
3
1
1
4
2
4
27  
Repeatedly pressing  
Volume Control  
POP  
CLAS  
FLAT  
ROCK  
GoToDolbyDigitalSetup  
SetDRCoff  
Press 15 VOL+ button to increase the sou-  
nd level and press 15 VOL- button to decr-  
ease the sound level.  
Note:  
Note:  
*
Press and hold EQ on the head unit also  
performs the same function.  
* Rotating VOL on the head unit also performs  
the same function.  
28  
17  
05  
03  
Common Operations  
DVD  
Turning Loudness On/Off  
Night Mode  
--GeneralSetupPage--  
19  
26  
Hold and press  
button to enter the  
Witheout bluetooth, briefly press  
LOUD  
night mode, press it again to switch to the  
normal mode. During night mode, to turn  
off the blue screen and weeken the button  
light.  
on the remote control to activate LOUD  
function. You can press this button to incr-  
ease the low frequcan improve sensitivity  
for your ears. And LOUD ON appears.  
Press it again to shut down this function,  
and LOUD OFF appears.  
Captions  
Exampleshowinghowtosetcaptionson/off:  
(Press  
,
or ,thenpressENTER)  
--GeneralSetupPage--  
(Press  
--GeneralSetupPage--  
Note:  
TVDisplay  
AngleMark  
TVDisplay  
AngleMark  
Wide  
On  
Wide  
On  
*
This function is operated by using the remote  
control only.  
Note:  
OSDLang  
Captions  
Eng  
Off  
On  
OSDLang  
Captions  
Eng  
Off  
On  
*
Without bluetooth, briefly press LOUD on  
the head unit or set LOUDNESS in MAIN  
MENU also performs the same function.  
On  
Off  
ScreenSaver  
LogoType  
ScreenSaver  
LogoType  
Mode Selector  
Def  
Def  
25  
Press MODE button to select the different  
modes available.  
GoToGeneralSetupPage  
ClosedCaptions  
Note:  
Mute Function  
14  
Press  
output and  
resume to previous volume level.  
button to shut off the sound  
appears. Press it again to  
*
Briefly press MOD on the head unit also  
performs the same function.  
ScreenSaver  
ExampleshowinghowtosetScreenSaveron/off:  
Display Mode  
During video playback, press and hold  
ZOOM button to select 4:3 display mode,  
press and hold it again to display the previous  
one.  
Note:  
(Press  
,
or ,thenpressENTER)  
--GeneralSetupPage--  
(Press  
10  
*
Press MUT on the head unit performs the same  
function.  
--GeneralSetupPage--  
TVDisplay  
AngleMark  
TVDisplay  
AngleMark  
Wide  
On  
Wide  
On  
CLEAR  
23  
OSDLang  
Captions  
Eng  
Off  
On  
OSDLang  
Captions  
Eng  
Off  
On  
Note:  
Press  
CLEAR to clear the mistake input.  
*
To set this function by WIDE in MAIN MENU.  
ScreenSaver  
LogoType  
ScreenSaver  
LogoType  
On  
Off  
Def  
Def  
Note:  
GoToGeneralSetupPage  
ScreenSaver  
*
This function is operated by using the remote  
control only.  
Infrared Sensor:  
7
remote commander.  
Receptor  
on the head unit for the card  
Force Disc Out  
LogoType  
ExampleshowinghowtosetLogoType:  
A/V In  
During playback, when a disc was locked or  
can not eject, press MODE on the head unit  
to switch to the radio mode then hold and  
press the button 3 seconds,that disc can  
be forced out.  
(Press  
,
or ,thenpressENTER)  
--GeneralSetupPage--  
(Press  
You can input the audio or video frequency  
into the main unit to increase the volume  
through A/V In.  
--GeneralSetupPage--  
TVDisplay  
AngleMark  
TVDisplay  
AngleMark  
Wide  
On  
Wide  
On  
OSDLang  
Captions  
Eng  
Off  
On  
OSDLang  
Captions  
Eng  
Off  
On  
Release the front panel  
ScreenSaver  
LogoType  
ScreenSaver  
LogoType  
2
Press  
REL to release the front panel.  
Def  
Def  
Default  
Captured  
Note:  
* This function is operated by the head unit only.  
GoToGeneralSetupPage  
LogoType  
18  
27  
04  
05  
DVD  
Main Menu  
1.Audio Adjust  
--GeneralSetupPage--  
Set up Main Menu  
After Selecting AUDIO, press ENTER to  
enter the setting system:  
Press and hold SETUP on the remote control  
or MENU on the head unit , the setting pic-  
ture appears as follow:  
TVDisplay  
ExampleshowinghowtosetTVDisplaymode:  
(Press  
AUDIO SETUP  
,
or ,thenpressENTER)  
--GeneralSetupPage--  
(Press  
BALANCE  
FAD  
BASS  
TREBLE  
EQUALIZER  
LOUDNESS  
BACK  
00  
00  
00  
00  
FLAT  
OFF  
--GeneralSetupPage--  
MAIN MENU  
TVDisplay  
AngleMark  
TVDisplay  
AngleMark  
Normal/PS  
Normal/LB  
Wide  
On  
Wide  
On  
AUDIO  
VIDEO  
OSDLang  
Captions  
Eng  
Off  
On  
OSDLang  
Captions  
Eng  
Off  
On  
Wide  
SOURCE SEL  
PREFERENCE  
EXIT  
ScreenSaver  
LogoType  
ScreenSaver  
LogoType  
Def  
Def  
GoToGeneralSetupPage  
SetTVDisplaymode  
You can adjust BALANCE, FAD, BASS  
TREBLE, EQUALIZER,LOUDNESS,  
press [ ] or BACK then press ENTER to  
go back to the previous menu.  
For example, press [ ] [ ] to select BASS,  
the setting menu will appear as follow:  
The main menu includes 5 selections above,  
press or button to select the requisite it-  
em, then hit ENTER to set it; press or  
button to reach EXIT, press ENTER to  
exit setting.  
AngleMark  
Exampleshowinghowtosetpicturemode:  
(Press  
,
or ,thenpressENTER)  
--GeneralSetupPage--
(Press  
Note:  
--GeneralSetupPage--  
* Buttons of [ ] [ ] [ ] [ ]/ENTER are  
on the remote control.  
AUDIO SETUP  
TVDisplay  
AngleMark  
TVDisplay  
AngleMark  
Wide  
On  
Wide  
On  
On  
BALANCE  
FAD  
BASS  
00  
00  
00  
* Rotate and press VOL button on the head unit  
performs the same function.  
Off  
OSDLang  
Captions  
Eng  
Off  
On  
OSDLang
Captions
Eng  
Off  
On  
ScreenSaver  
LogoType  
ScreenSaver  
LogoType  
TREBLE  
00  
FLAT  
OFF  
Def  
Def  
EQUALIZER  
LOUDNESS  
BACK  
GoToGeneralSetupPage  
SetAngleMark  
Press [ ] [ ] to increase or decrease the  
size, and then press ENTER. Press [ ] to  
go back to the previous menu.  
OSDLang  
Exampleshowinghowtosetlanguagemode:  
(Press  
,
or ,thenpressENTER)  
--GeneralSetupPage--  
(Press  
Note:  
--GeneralSetupPage--  
* Adjusting the other items perform the same  
operation.  
TVDisplay  
AngleMark  
TVDisplay  
AngleMark  
Wide  
On  
Wide  
On  
OSDLang  
Captions  
Eng  
Off  
On  
OSDLang  
Captions  
Eng  
Off  
On  
English  
ScreenSaver  
LogoType  
ScreenSaver  
LogoType  
Def  
Def  
GoToGeneralSetupPage  
SetOSDLanguage  
26  
19  
05  
04  
DVD  
Main Menu  
Changing audio language  
(Multi-audio)  
Selecting Different Menu/Title  
EQUALIZER  
2.Video Adjust  
Press[ ]or [ ] to select EQUALIZER,  
then press ENTER, the setting menu  
appears as follow:  
Selecting VIDEO in main menu, press  
ENTER to enter setting system.  
Under DVD playback mode, press 4 MENU  
DVDs can provide audio playback with  
different language. With DVDs featuring  
multi-audio recordings, you can press  
AUDIO to switch between language and  
audio systems during playback.  
3
the title menu, the monitor display all the  
or  
TITLE to return to the root menu or  
6
chapters or all titles. You can press and  
22  
24 Number Buttons on the remote co-  
ntrol to select different chapter or title.  
VIDEO SETUP  
AUDIO SETUP  
BRIGHT  
30  
BALANCE  
FAD  
BASS  
TREBLE  
EQUALIZER  
LOUDNESS  
BACK  
00  
00  
00  
00  
CONTRAST 30  
Selection options switch as follows:  
COLOR  
HUE  
WIDE  
30  
Note:  
30  
WIDE  
AUDIO 1  
AUDIO 2  
AUDIO 3......  
*
This function is operated by using the remote  
control.  
FLAT  
OFF  
DEFAULT  
BACK  
STANDARD  
Note:  
*
This function is operated by using the remote  
control.  
This function only operates with DVDs fea-  
The main menu includes items above.  
Press or BACK and then press ENTER  
to go back to the previous menu.  
SET UP MENU  
Press [ ] [ ] to select your desired item,  
*
21  
During DVD playback, press SETUP ,  
the screen will display system setting pic-  
ture, the user can select some relative con-  
stant parameters. The user also can set it as  
then press ENTER, press  
the previous menu.  
to go back to  
turing multi-audio recordings.  
2
*
The number in the  
mark on a DVD's  
package indicates the number of recorded  
languages/audio systems.  
Image Adjust  
LOUDNESS  
22  
needed by moving the cursor and using  
Adjusting the CONTRAST : press[ ]or  
[
][ ][ ][ ] buttons, and then press  
22  
Press[ ]or [ ] to select LOUDNESS,  
then press ENTER, the setting menu  
appears as follow:  
[ ] to select CONTRAST, then press  
ENTER, the setting menu appears as  
ENTER to execute the selecting or enter-  
ing item.  
Changing the subtitle language  
(Multi-subtitle)  
follow:  
Press [ ][ ][ ] to move the cursor on  
then press ENTER to exit the menu  
AUDIO SETUP  
VIDEO SETUP  
X
setup.  
With DVDs featuring multi-subtitle recor-  
5
dings. You can press SUB-T to switch  
between subtitle languages during playback.  
BALANCE  
FAD  
BASS  
TREBLE  
EQUALIZER  
LOUDNESS  
BACK  
00  
00  
00  
00  
FLAT  
OFF  
BRIGHT  
30  
Note:  
CONTRAST 30  
*
The selections are the preferred options that  
will be chosen if they are available on a disc.  
If the disc that is inserted does not have the  
preferred option then the discs own pre-  
ference will be used.  
COLOR  
HUE  
WIDE  
30  
Selection options switch as follows:  
30  
WIDE  
......  
Subtitles 1  
Subtitles 2  
Subtitles OFF  
DEFAULT  
BACK  
STANDARD  
*
*
Regarding SETUP MENU, please refer to  
the following pages for more details.  
Note:  
Press [ ] [ ] to select your desired item,  
then press ENTER, press  
the previous menu.  
*
This function is operated by using the remote  
control.  
Some functions varies depending on the types  
of models or formats of the disc.  
Press [ ] [ ] to increase or decrease the  
size, and then press ENTER. Press [ ] to  
go back to the previous menu. Adjusting  
the other items perform the same operation.  
to go back to  
*
This function only operates with DVDs fea-  
turing multi-subtitle recordings.  
2
*
The number in the  
mark on a DVD's  
package indicates the number of recorded  
subtitle languages.  
20  
25  
04  
05  
DVD  
Main Menu  
3.Source Setup  
Number Buttons  
WIDE  
Setting the Playing Time  
Press[ ]or [ ] to select WIDE, then press  
ENTER, the setting menu appears as follow:  
24  
Selecting SOURCE SEL by pressing  
in main menu, press ENTER to enter  
setting system.  
2
press  
Number Buttons to input the  
During DVD mode, press  
GOTO button  
desired tracks, then it will be played auto-  
matically.  
to set the playing time, when the TFT dis-  
play : title/chapter/audio/subtitle/angle  
/title time/chapter time/repeat /time disp.  
][ ] to select the options, press  
ENTER to set the status.Then press 24NU-  
VIDEO SETUP  
Note:  
2
2
Press  
[
SOURCE SEL  
BRIGHT  
30  
*
This function is operated by using the remote  
control.  
RADIO  
USB  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
CONTRAST 30  
MBER BUTTONS or  
current status.  
2
2
[
][ ] to set the  
COLOR  
HUE  
30  
SD  
30  
DISC  
IPOD  
AV-R  
AV-F  
WIDE  
WIDE  
Repeat Playing  
Note:  
DEFAULT  
BACK  
STANDARD  
*
This function is operated by using the remote  
control.  
16  
Repeatedly repeatedly press  
remote control to replay as following:  
RPT on the  
Press [ ] [ ] to select your desired item,  
BACK  
Chapter  
Title  
then press ENTER, press  
the previous menu.  
to go back to  
Changing the viewing angle  
(Multi-angle)  
Off  
This menu can set up the above items by  
pressing [ ] and [ ] and ENTER.  
If you set one of them OFF, the function  
is invalid. For example, if one item set OFF  
pressing SOURCE button can not activate  
it. During playback mode, you can not  
set it OFF.  
Note:  
With DVDs featuring multi-angle (scenes  
shot from multiple angles) recordings, you  
*
*
Press AMS on the head unit also performs  
the same function.  
Default  
7
can press  
viewing angles during playback.  
ANGLE to switch among  
The default setting is DISC REPEAT.  
Adjusting the DEFAULT : press[ ]or [  
to select DEFAULT, then press ENTER,  
the setting menu appears as follow:  
]
Selection options switch as follows:  
On-screen display  
8
During DVD playback, briefly press OSD,  
the monitor shows:  
ANGLE 1  
ANGLE 2  
ANGLE 3 ......  
VIDEO SETUP  
Note:  
BRIGHT  
30  
Title elapsed time  
Title remain time  
Chapter  
CONTRAST 30  
*
*
This function is operated by using the remote  
control.  
Chapter  
remain time  
OFF  
COLOR  
HUE  
WIDE  
30  
elapsed time  
30  
WIDE  
This function is only operated by DVD with  
multi-angle recordings.  
Press and hold this button to display the  
current source information.  
DEFAULT  
BACK  
STANDARD  
3
*
This  
mark on a DVD package indicates  
it features multi-angles scenes,  
The number in the mark indicates the  
number of angles from which scenes were slot.  
Note:  
3
*
This function is operated by using the remote  
control.  
The main menu includes selections above,  
after selecting any one of them, DEFAULT  
will switch to USER.  
press or button to adjust item, then press  
ENTER.  
Press to go back to the previous menu.  
*
If you press ANGLE during fast forward/fast  
reverse or pause, fast forward/fast reverse or  
pause is canceled and normal playback resumes  
but the viewing angle does not change.  
24  
21  
05  
04  
DVD  
Main Menu  
4.PREFERENCE SETUP  
Select PREFERENCE, thenpress ENTER.  
Basic operation of DVD  
Slow motion playback  
Clock Adjust  
11  
Press  
to slow forward or slow back-  
Insert a DVD disc into the slot,the unit will  
automatically switch on, if a DVD disc is  
PREFERENCE  
ward. There are such speeds each pressing  
decreases the speed until the minimum  
speed is reached.  
CLOCK SYS 24 HOUR  
CLOCK ADJ 00:00:00  
PREFERENCE  
25  
loaded, press  
MODE on the remote  
control to switch to DVD mode to start the  
playback.  
CLOCK SYS 24 HOUR  
CLOCK ADJ 00:00:00  
KEY BEEP  
ON  
REV POLA  
BACK  
BATTERY  
Note:  
KEY BEEP  
ON  
*
Pressing MOD button on the head unit also  
performs the same function.  
Note:  
REV POLA  
BACK  
BATTERY  
*
This function is operated by using the remote  
control only.  
Setting CLOCK ADJ in this menu,Press  
] and [ ] and ENTER.Press to go  
back to the previous menu.  
[
This menu can set up the above items by  
pressing [ ] and [ ] and ENTER.  
Press or BACK, then press ENTER to  
go back to the previous menu.  
Playing the Previous/Next Track  
System Button  
9
DuringDVDplayback,firstpress  
returntothebeginningofthecurrenttrack,  
press againwithin3secondstoplay  
to  
12  
During DVD playback, press P/N button  
to select standard TV system as following:  
KEY BEEP  
9
PREFERENCE  
9
previoustrack,press  
toplaynexttrack.  
AUTO  
NTSC  
Clock System  
CLOCK SYS 24 HOUR  
CLOCK ADJ 00:00:00  
PAL  
Note:  
PREFERENCE  
Note:  
12  
button on the head unit  
also performs the same function.  
*
Briefly pressing  
KEY BEEP  
ON  
CLOCK SYS 24 HOUR  
CLOCK ADJ 00:00:00  
*
This function can be operated by selecting  
the DVD MENU SETUP.  
REV POLA  
BACK  
BATTERY  
KEY BEEP  
ON  
Playing Track F.F/F.REW  
Increase the size of the picture  
REV POLA  
BACK  
BATTERY  
Setting KEY BEEP ON or OFF in this menu,  
the default setting is ON. Press [ ] and  
Press  
or toplaythetrackfastforward  
20  
10  
ZOOM to increase the  
Briefly press  
orfastrewind:Eachpressingwill change as  
following:  
[ ] and ENTER.  
Press to go back to the previous menu.  
picture in size. There are such sizes as  
following:  
Setting CLOCK SYSTEM in this menu,  
according to the desired setting 12 HOUR  
or 24 HOUR.Press [ ] and [ ] and ENTER.  
2X  
3X  
4X  
2X  
4X  
8X  
16X  
REVERSE POLA  
NoChange  
Press  
to go back to the previous menu.  
Press and hold it to display NORMAL(4:3),  
WIDE(16:9).  
PREFERENCE  
Note:  
12  
button on the head unit also  
*
Press and hold  
performs the same function.  
CLOCK SYS 24 HOUR  
CLOCK ADJ 00:00:00  
Note:  
*
*
This function is operated by using the remote  
control.  
To remove the image by pressing22 button.  
KEY BEEP  
REV POLA  
BACK  
ON  
BATTERY  
Stop the playback  
DuringDVDmode,first pressing  
18  
to  
19  
toplay,press  
Pause the playback  
pauseplaying,press  
Setting reverse pola in this menu, The signal  
is +12V when you back a car, please set  
BATTERY; if the signal is 0V, please set  
GROUND.Press [ ] and [ ] and ENTER.  
Press to go back to the previous menu.  
18  
pauseandplaymode, duringstopmode,  
DuringDVDmode,press  
toswitch  
buttontwicetostopplayingcompletely,press  
PLAYbuttontostartplaying.  
pressitagaintoresumetotheplaybackmode.  
Note:  
Note:  
8
*
Press and hold  
button on the head unit also  
8
*
Briefly press  
button on the head unit also  
performs the same function.  
performs the same function.  
22  
23  

Roadmaster 12 Subwoofer VSW120 User Manual
Radio Shack PLVWR840 User Manual
Radio Shack CID 948 User Manual
Panasonic DVDXV10 User Manual
Panasonic CQRX65EU User Manual
Numark Industries Car Stereo System 9 Aug User Manual
Metz Mecablitz 36 AF 3N User Manual
Melissa 646 048 User Manual
MB QUART Discus DKG 110 User Manual
Kenwood DNX5120 User Manual