OWNER’S MANUAL
Smart 3D
Blu-ray Disc™Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP530
P/NO : SAC35673307
Getting Started
3
This device is equipped with a portable battery or
accumulator.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
y
y
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
Consult the dealer or an experienced radio/TV
technician for help.
1
CAUTION: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
FCC RF Radiation Exposure Statement : This
equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body. End users must follow the
specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be
co-located or operating in conjunction with any
other antenna or transmitter.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
FCC Compliance Statement
CAUTION: Regulations of the FCC and FAA prohibit
airborne operation of radio-frequency wireless
devices because their signals could interfere with
critical aircraft instruments.
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and
Responsible Party :
LG Electronics USA, Inc.1000 Sylvan Avenue
Englewood Cliffs, NJ 07632
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
TEL. : +1-800-243-0000
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
y
y
Increase the separation between the equipment
and receiver.
4
Getting Started
Caution
Watching a 3D content for a long period
time may cause dizziness or tiredness.
Notes on copyrights
>
y
y
Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
content. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
y
It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
1
If you are experiencing headache, tiredness
or dizziness while viewing content in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
y
Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected content. To
obtain additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact an
authorized Customer Service Center.
y
Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
y
y
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
y
Getting Started
5
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
1
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold
with the apparatus. When a
cart is used, use caution when
moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
6
Table of Contents
4
Operating
Table of Contents
29 Home Menu Display
29 – Using [HOME] menu
29 – Using the Smart Share
30 Playing the Linked Devices
30 – Playing a disc
30 – Playing Blu-ray 3D disc
31 – Playing a file on disc/USB device
32 – Playing a file on a network server
33 Using Home Network Server for PC
33 – Installing Nero MediaHome 4
Essentials
1
Getting Started
2
8
8
Safety Information
Introduction
– Playable discs and symbols used in
this manual
– About the “7” symbol display
– Regional code
9
9
10 Remote Control
11
11
33 – Sharing files and folders
34 – About Nero MediaHome 4 Essentials
34 – System requirements
35 General Playback
Front Panel
Rear Panel
2
Connecting
35 – Basic operations for video and audio
content
35 – Basic operations for photo content
35 – Using the disc menu
36 – Resume playback
36 – Last scene memory
37 On-Screen Display
37 – To control video playback
38 – To control photo view
39 Advanced Playback
12
Connecting to your TV
13 – What is SIMPLINK?
13 – Resolution setting
14
15 – Connecting to an amplifier via HDMI
output
15 – Connecting to an amplifier via digital
audio output
Connecting to an Amplifier
16
Connecting to your Home Network
39 – Repeat playback
16 – Wired network connection
16 – Wired network setup
18 – Wireless network connection
18 – Wireless network setup
39 – Repeating a specific portion
39 – Playing from selected time
40 – Selecting a subtitle language
40 – Hearing a different audio
40 – Watching from a different angle
40 – Changing the TV Aspect Ratio
41 – Changing subtitle Code Page
41 – Changing the Picture Mode
41 – Viewing content information
42 – Changing content list view
42 – Selecting a subtitle file
43 – Listening to music during slide show
43 – Setting the [3D] option
44 Advanced Features
3
System Setting
21
Initial Setup
22 Settings
22 – Adjust the setup settings
22 – [NETWORK] menu
24 – [DISPLAY] menu
25 – [LANGUAGE] menu
26 – [AUDIO] menu
27 – [LOCK] menu
44 – Wi-Fi Direct™
45 – Enjoying BD-Live™
28 – [OTHERS] menu
45 – LG AV Remote
45 – Private Sound Mode
46 – Audio CD recording
Table of Contents
7
47 Using the Premium
47 Using the LG Smart World
48 – Signing in
48 – Searching online content
49 Using the My Apps Menu
1
5
Troubleshooting
50 Troubleshooting
50 – General
51 – Network
52 – Picture
52 – Customer support
52 – Open source software notice
2
3
4
5
6
6
Appendix
53 Controlling a TV with the Supplied
Remote Control
53 – Setting up the remote to control your
TV
54 Network Software Update
54 – Network update notification
54 – Software update
56 Additional Information
56 – File requirement
57 – AVCHD (Advanced Video Codec High
Definition)
58 – About DLNA
58 – Certain system requirements
58 – Compatibility notes
59 Audio Output Specifications
61
Area Code List
62 Language Code List
63 Trademarks and Licenses
65 Specifications
66 Maintenance
66 – Handling the unit
66 – Notes on discs
67 Important Information relating to Network
Services
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
8
Getting Started
Introduction
1
Playable discs and symbols used in this manual
Media/Term
Logo
Symbol
Description
Discs such as movies that can be purchased or
rented.
y
e
“Blu-ray 3D”discs and“Blu-ray 3D ONLY”discs.
BD-R/RE discs that are recorded in BDAV format.
y
y
Blu-ray
BD-R/RE discs that contain Video, Audio or
Photo files.
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format
y
Discs such as movies that can be purchased or
rented.
y
r
Video mode and finalized only
Supports the dual layer disc also
y
y
DVD-ROM
DVD-R
Finalized AVCHD format
DVD-RW
DVD+R
o
DVD+RW
(8 cm, 12 cm)
DVD R/RW discs that contain Video, Audio or
Photo files.
y
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW (VR)
(8 cm, 12 cm)
VR mode and finalized only
Audio CD
r
t
Audio CD
(8 cm, 12 cm)
CD-R/RW discs that contain Video, Audio or
Photo files.
y
y
y
u
i
CD-R/RW
(8 cm, 12 cm)
ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates special notes and operating features.
Note
–
–
,
>
Indicates cautions for preventing possible damages
from abuse.
Caution
Getting Started
9
Note
,
About the “ ” symbol display
7
Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD R/RW) disc itself, some CD-R/RW (or
DVD R/RW) discs cannot be played on the
unit.
y
“7”may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
1
Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD R/RW, BD-R/RE) may not be playable.
y
y
Regional code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labeled same as the rear of the unit or“ALL”.
BD-R/RE, DVD R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
y
This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
y
y
Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
Customers should note that permission
is required in order to download MP3 /
WMA files and audio from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
y
y
You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
10 Getting Started
Remote Control
• • • • • • a • • • • • •
• • • • • • d • • • • •
1
1(POWER): Switches the player Colored (R, G, Y, B) buttons: Use
ON or OFF.
to navigate BD-ROM menus. They
are also used as shortcut buttons
for specific menus.
B(OPEN/CLOSE): Opens and
closes the disc tray.
TV Control Buttons: See page
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a number when
setting the password or network
connection.
REPEAT (h): Repeats a desired
section or sequence.
• • • • • • b • • • • •
c/v(SCAN): Searches
backward or forward.
C/V(SKIP): Goes to the
next or previous chapter / track /
file.
Z(STOP): Stops playback.
d(PLAY): Starts playback.
M(PAUSE): Pauses playback.
• • • • • • c • • • • •
HOME ( ): Displays or exits the
[Home].
Battery Installation
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
INFO/MENU (m): Displays or
exits On-Screen Display.
Direction buttons: Selects an
option in the menu.
Remove the battery cover on the
rear of the remote control, and
insert a R03 (size AAA) battery
with 4and 5matched correctly.
ENTER (b): Acknowledges menu
selection.
BACK (1): Exits the menu or
returns to the previous screen.
?: This button is not available.
DISC MENU: Accesses menu on a
disc.
Getting Started 11
Front Panel
1
a Disc Tray
e N(PLAY / PAUSE)
f Z(STOP)
b Display Window
c Remote Sensor
d B(OPEN / CLOSE)
g 1/!(POWER)
h USB Port
Rear Panel
a AC power cord
c HDMI OUT
b LAN port
d DIGITAL AUDIO OUT (COAXIAL)
12 Connecting
Additional information for HDMI
Connecting to your TV
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the player to the HDMI jack on a HDMI compatible
TV or monitor.
When you connect a HDMI or DVI compatible
device make sure of the following:
y
-
Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-
-
The connected device’s video input is set
correctly for this unit.
2
Rear of the unit
The connected device is compatible with
720x480p, 1280x720p, 1920x1080i or
1920x1080p video input.
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
y
-
The picture will not be displayed properly
with non-HDCP device.
Note
,
HDMI
cable
If a connected HDMI device does not accept
y
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
TV
When you use HDMI connection, you can
change the resolution for the HDMI output.
y
y
y
Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (page 25).
Set the TV’s source to HDMI (refer to TV’s owner’s
manual).
Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
Note
,
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
y
y
If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m (15 ft.)).
Connecting 13
What is SIMPLINK?
Resolution setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution
using [Settings] menu.
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
1. Press HOME ( ).
2. Use A/Dto select the [Settings] and press
ENTER (b). The [Settings] menu appears.
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
3. Use W/Sto select [DISPLAY] option then
press Dto move to the second level.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
2
4. Use W/Sto select the [Resolution] option
then press ENTER (b) to move to the third level.
LG TV’s with SIMPLINK function has the logo as
shown above.
Note
,
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
5. Use W/Sto select the desired resolution then
press ENTER (b) to confirm your selection.
14 Connecting
Note
,
Connecting to an
Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
If your TV does not accept the resolution
y
you have set on the player, you can set
resolution to 480p as follows:
1. Press Bto open the disc tray.
2. Press Z(STOP) for more than 5 seconds.
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
y
y
HDMI audio connection (page 15)
Digital audio connection (page 15)
y
y
Since many factors affect the type of audio output,
see“Audio Output Specifications”for details (page
2
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
About Digital Multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this, you need a multi-
channel Audio/Video Receiver that supports one
or more of the audio formats supported by your
player. Check the logos on the front of the Audio/
Video receiver and the manual. (PCM Stereo, PCM
Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and/or DTS-HD)
The 1080p video output frame rate may
be automatically set to either 24 Hz or
60 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
y
Connecting 15
Connecting to an amplifier via
HDMI output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using a
HDMI cable.
Connecting to an amplifier via
digital audio output
Connect the player’s COAXIAL OUT jack to the
corresponding in jack on your amplifier using an
optional digital audio cable.
Rear of the unit
Rear of the unit
2
Coaxial
cable
HDMI cable
Receiver/Amplifier
HDMI cable
Receiver/Amplifier
You will need to activate the player’s digital output.
TV
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplifier has HDMI output jack (Refer to amplifier’s
owner’s manual).
You will need to activate the player’s digital output.
16 Connecting
Connecting to your
Home Network
Broadband
service
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel or
the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and online
content services.
2
Router
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
DLNA certified servers
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
Note
,
When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
y
Rear of the unit
Wired network setup
Do not connect a modular phone cable to
the LAN port.
y
y
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
If you want to access content from DLNA
servers, this player must be connected to
the same local area network with them via a
router.
y
y
Preparation
To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC.
Before setting the wired network, you need to
connect the broadband internet to your home
network.
Connecting 17
1. Select [Connection Setting] option in the
2. Use W/S/A/Dto select the IP mode
[Settings] menu then press ENTER (b).
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
2
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Note
,
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/Dand numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
Network will automatically be connected to the
unit.
3. Select [Next] and press ENTER (b) to apply
network settings.
Network connection status is displayed on the
screen.
Advanced Setting
If you want to set the network settings manually,
use W/Sto select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
4. Press ENTER (b) while [OK] is highlighted to
finish the wired network settings.
1. Use W/Sto select [Wired] and press ENTER
(b).
18 Connecting
Wireless network connection
Preparation
Another connection option is to use an Access Point
or a wireless router. The network configuration and
connection method may vary depending on the
equipment in use and the network environment.
Before setting the wireless network, you need
to:
-
connect the broadband internet to the
wireless home network.
-
-
set the access point or wireless router.
note the SSID and security code of the
network.
2
1. Select [Connection Setting] option in the
Wireless
Communication
[Settings] menu then press ENTER (b).
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
DLNA certified servers
Access Point or
Wireless Router
If wired network is not connected to the unit, all
available networks are displayed on the screen.
Broadband
service
3. Use W/Sto select a desired SSID of wireless
network and press ENTER (b).
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection
from this player to your home network’s router or
cable/DSL modem is always the best option.
If you do chose to use the wireless option, note that
performance can sometimes be affected by other
electronic devices in the home.
If you have security on your access point, you
need to input the security code as necessary.
Note
,
If you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed differently.
Wireless network setup
For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Settings]
menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless router
is required before connecting the player to the
network.
Connecting 19
Advanced Setting
If you want to set the network settings manually,
use W/Sto select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
1. Use W/Sto select [Wireless] and press ENTER
(b).
Note
,
WEP security mode generally have 4 keys
available on an access point setting. If your
access point or wireless router use WEP
security, enter the security code of the key
“No.1”to connect on your home network.
y
y
2
An Access Point is a device that allows you
to connect to your home network wirelessly.
[AP List] - Scans all available access points or
wireless routers within range and display them
as a list.
4. Use W/S/A/Dto select the IP mode
between [Dynamic] and [Static].
[Network name (SSID)] – Your access point
may not be broadcasting its network name
(SSID). Check your access point settings through
your computer and either set your access
point to broadcast SSID, or manually enter the
network name in [Network name(SSID)].
Normally, select [Dynamic] to allocate an IP
address automatically.
Note
,
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/Dand numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
[PBC] – If your access point or wireless
router that supports the PBC (Push Button
Configuration) method, select this option and
press the Push Button on your access point
within 120 counts. You do not need to know the
network name (SSID) and security code of your
access point.
[PIN] – If your access point supports the PIN
Code configuration method based on WPS(Wi-
Fi Protected Setup), select this option and
note the code number on the screen. And
then, enter the PIN number on a setting menu
of your access point to connect. Refer to the
documentation for your network device.
5. Select [Next] and press ENTER (b) to apply
network settings.
2. Follow the instructions of each connection
method on the screen.
Network connection status is displayed on the
screen.
Note
,
To use PBC and PIN network connection,
security mode of your access point must be
set to OPEN or AES.
6. Select [OK] and press ENTER (b) to complete
the network connection.
20 Connecting
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
Notes on network connection
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
y
The use of a“Router”may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
y
y
Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
y
y
2
The wireless network operate at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be
affected by interference from them.
Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
y
y
y
y
y
The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
y
For the purpose of the better transmission,
placing the player from the access point as close
as possible.
In some instances, placing the access point or
wireless router at least 0.45 m (1.5 ft.) above the
floor may improve the reception.
Move closer to the access point if possible or re-
orient the player so there is nothing between it
and the access point.
Some internet content may require a higher
bandwidth connection.
y
y
The reception quality over wireless depends on
many factors such as type of the access point,
distance between the player and access point,
and the location of the player.
Even if the player is properly connected and
configured, some internet content may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
y
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
y
Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
y
y
A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
You must use a Router to use xDSL service.
y
y
A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
System Setting 21
5. Use W/S/A/Dto select the IP mode
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
1. Press 1(POWER).
The initial setup wizard appears on the screen.
2. Use W/S/A/Dto select a display language
and press ENTER (b).
6. Select [Next] and press ENTER (b) to apply
network settings.
3
3. Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
Network connection status is displayed on the
screen.
For details on network settings, refer to
“Connecting to your Home Network”on page
7. Check all the settings that you have set in the
previous steps.
If wired network is connected, the network
connection setting will automatically be
finished.
4. All available networks are displayed on the
screen. Use W/Sto select [Wired Network]
or desired SSID of wireless network and press
ENTER (b).
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/Dto
select 1 and press ENTER (b).
If you have security on your access point, you
need to input the security code as necessary.
22 System Setting
[NETWORK] menu
The [NETWORK] settings are needed to use the
software update, BD-Live and online content
services.
Settings
Adjust the setup settings
You can change the settings of the player in the
[Settings] menu.
Connection Setting
If your home network environment is ready to
connect the player, the player needs to be set the
wired or wireless network connection for network
communication. (See“Connecting to your Home
1. Press HOME ( ).
Connection Status
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection
to the network and the internet have been
established.
3
2. Use A/Dto select the [Settings] and press
ENTER (b). The [Settings] menu appears.
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
Internet access is permitted for all BD-Live
content.
3. Use W/Sto select the first setup option, and
press Dto move to the second level.
[Partially permitted]
Internet access is permitted only for BD-Live
content which have content owner certificates.
Internet access and AACS Online functions are
prohibited for all BD-Live content without a
certificate.
[Prohibited]
4. Use W/Sto select a second setup option, and
Internet access is prohibited for all BD-Live
content.
press ENTER (b) to move to the third level.
5. Use W/Sto select a desired setting, and press
ENTER (b) to confirm your selection.
System Setting 23
Smart Service Setting
Network Play
This function allows you to control the playback
of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
smartphone has a function to control the playback
media on your home network. Set this option to
[On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
smartphone or the application for more detailed
information.
[Country Setting]
Select your area for displaying proper online
content service.
[Initialize]
[Deactivate Netflix]
y
Deactivates your player. To activate the
Netflix again, contact to the service provider.
[Netflix ESN]
y
Note
Display its unique Netflix ESN (Electronic
Serial Number) that allows you to use the
Netflix streaming.
,
This unit and the DLNA Certified
Smartphone must be connected to the
same network.
y
y
[Deactivate Vudu]
y
3
To use the [Network Play] function using a
DLNA certified smartphone, press HOME
Deactivates your player. To activate the Vudu
again, contact to the service provider.
(
) to display the home menu before
connecting to this unit.
Device Name
You can make a network name using virtual
keyboard. This player will be recognised by the
name you are entering on your home network.
While controlling the unit using the
[Network Play] function, the remote control
may not work.
y
y
Available file formats described on page
56 are not always supported on [Network
Play] function.
Wi-Fi Direct
This player is a Wi-Fi Direct™ certified device. Wi-
Fi Direct is the technology that devices to connect
each other without connecting to an Access point
or a router. Press ENTER (b) to display the Wi-Fi
Direct menu. Refer to page 45 for the device
connection.
24 System Setting
Resolution
[DISPLAY] menu
Sets the output resolution of the HDMI video signal.
setting.
TV Aspect Ratio
Select a TV aspect ratio option according to your TV
type.
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
[1080p]
[4:3 Pan Scan]
Outputs 1080 lines of progressive video.
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[1080i]
3
Outputs 1080 lines of interlaced video.
[16:9 Original]
[720p]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
Outputs 720 lines of progressive video.
[480p]
Outputs 480 lines of progressive video.
[16:9 Full]
1080p Display Mode
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
Note
,
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
Note
,
When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [60 Hz].
y
y
Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 60 Hz to match the
video source format.
System Setting 25
HDMI Color Setting
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
[LANGUAGE] menu
Display Menu
Select a language for the [Settings] menu and on-
screen display.
[YCbCr]
Select when connecting to a HDMI display
device.
Disc Menu / Disc Audio /
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[RGB]
Select when connecting to a DVI display
device.
[Original]
Refers to the original language in which the
disc was recorded.
3D Mode
Select the type of output mode for Blu-ray 3D disc
playback.
3
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
[Off]
Blu-ray 3D disc playback will output as 2D
mode like a normal BD-ROM disc playback.
[On]
[Off] (Disc Subtitle only)
Blu-ray 3D disc playback will output as 3D
mode.
Turn off Subtitle.
Note
Home Menu Guide
This function allows you to display or delete the
guide bubble on the [HOME] menu. Set this option
to [On] for displaying guide.
,
Depending on the disc, your language setting
may not work.
26 System Setting
Sampling Freq.
(Digital Audio Output)
[AUDIO] menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
[192 kHz]
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
Note
,
Since many factors affect the type of audio
output, see“Audio Output Specifications”on
page 59 for details.
[96 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit
automatically converts any 192 kHz signals to
96 kHz so your system can decode them.
Digital Output
[PCM Stereo] (HDMI, COAXIAL)
[48 kHz]
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with two-
channel digital stereo decoder.
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz and 96 kHz
signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
3
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack
to a device with multi-channel digital decoder.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
[DTS Re-Encode] (HDMI, COAXIAL)
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with DTS
decoder.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[BitStream] (HDMI, COAXIAL)
Select if you connect this unit’s DIGITAL AUDIO
OUT and HDMI OUT jack to a device with
LPCM, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and DTS-HD decoder.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
Note
,
When [Digital Output] option is set to [PCM
Multi-Ch], the audio may output as PCM
Stereo if the PCM Multi-Ch information is
not detected from HDMI device with EDID.
y
y
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted
for the other discs (like [BitStream]).
Note
,
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
System Setting 27
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[LOCK] menu
The [LOCK] settings affect only Blu-ray Disc and
DVD playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Password
You can create or change the password.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number
[None]
buttons to input an age limit for BD-ROM viewing.
3
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[255]
[Change]
All BD-ROM can be played.
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
If you forget your password
Note
If you forget your password, you can clear it using
the following steps:
,
The [Blu-ray Disc Rating] will be applied
only for the Blu-ray disc that containing the
Advanced Rating Control.
y
y
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Settings] menu.
For the region using MPAA rating level, refer
to the table below as an example.
3. Use Number buttons to enter“210499”. The
password is cleared.
Blu-ray Disc Rating
MPAA Rating
Note
,
0
8
G
PG
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
13
17
18
255
PG-13
R
NC-17
Not restricted
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
28 System Setting
Software
[OTHERS] menu
[Information]
Quick Start
Displays the current software version.
This player can stay in standby mode with low
power consumption, so that the player can
instantly boot without delay when you turn on this
unit. Set this option to [On] for activating [Quick
Start] function.
[Update]
You can update the software by connecting
the unit directly to the software update server
Note
,
If [Quick Start] option is set to [On] and an
AC power is accidently re-connected to
the player by power failure etc., the player
automatically boots itself to be the standby
status. Before operating the player, wait for a
while until the player is in standby status.
y
3
When [Quick Start] is set to [On], power
consumption will be higher than when
[Quick Start] is set to [Off].
y
Auto Power Off
The screen saver appears when you leave the
player in Stop mode for about five minutes. If
you set this option to [On], the unit automatically
turns off within 20 minutes since the Screen Saver
is displayed. Set this option to [Off] to leave the
screen saver until the unit is operated by the user.
Initialize
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
Initializes the BD-Live content from the
connected USB storage.
Note
,
If you reset the player to its original factory
settings using [Factory Set] option, you have to
set all the activation for the online services and
network settings again.
Operating 29
Using the Smart Share
You can play video, photo and audio content on
the unit by inserting a disc, connecting an USB
device or using home network (DLNA).
Home Menu Display
Using [HOME] menu
The home menu appears when you press HOME
1. Press HOME ( ) to display the home menu.
2. Select [Smart Share] and press ENTER (b).
(
). Use W/S/A/Dto select a category and
press ENTER (b).
Note
,
4
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
a
b
c
Displays all linked devices.
Displays video, photo or audio content.
Displays the file or folder on linked device.
a
b
[Smart Share] - Displays Smart Share menu.
[Premium] - Displays the Premium home
[LG Smart World] - Displays LG Apps titles
provided to the unit. (page 47)
c
[My Apps] - Displays the [My Apps] screen.
d
e
f
g
[Settings] - Adjusts the system settings.
[Search] - Searches for desired LG Apps and
other content.
[Log In] - Displays login menu.
30 Operating
Playing Blu-ray 3D disc
Playing the Linked
Devices
e
This player can play the Blu-ray 3D disc which
contains separate views for the left and right eyes.
Playing a disc
Preparation
erot
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
1. Press B(OPEN/CLOSE), and place a disc on the
disc tray.
Check your TV is 3D capable and has HDMI
input(s).
y
y
y
y
2. Press B(OPEN/CLOSE) to close the disc tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
Wear 3D glasses to enjoy the 3D experience
if it is necessary.
3. Press HOME ( ) and then select [Smart Share].
4. Select disc icon.
Check whether the BD-ROM title is the Blu-
ray 3D disc or not.
Connect an HDMI cable (Type A, High
Speed HDMI™ Cable) between the player’s
HDMI output and TV’s HDMI input.
Note
,
Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
y
y
4
1. Press HOME ( ), and set the [3D Mode] option
on the [Settings] menu to [On] (page 25).
Depending on the BD-ROM titles, an USB
device connection may be needed for the
proper playback.
2. Press B(OPEN/CLOSE), and place a disc on the
disc tray.
3. Press B(OPEN/CLOSE) to close the disc tray.
Unfinalized DVD-VR format discs may not
be played in this player.
y
y
The playback starts automatically.
4. Refer to the owner’s manual of your 3D-ready
TV for the further instruction.
Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
Caution
Watching a 3D content for a long period
time may cause dizziness or tiredness.
>
y
y
It is not recommended to watch a video
in 3D mode for infirm, child and pregnant
woman.
If you are experiencing headache, tiredness
or dizziness while viewing content in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
y
Operating 31
Notes on USB device
Playing a file on disc/USB
device
This player supports USB flash drive/external
HDD formatted in FAT32 and NTFS when
y
yui
accessing files (music, photo, movie). However,
for BD-Live and Audio CD recording, use the USB
flash drive / external HDD formatted in FAT32.
This player can play video, audio and photo files
contained in the disc or USB device.
This unit can support up to 4 partitions of the
USB device.
y
y
y
1. Insert a data disc on the tray or connect an USB
device.
Do not extract the USB device during operation
(play, etc.).
An USB device which requires additional
program installation when you have connected
it to a computer, is not supported.
USB device: USB device that supports USB1.1
and USB2.0.
y
y
Video, audio and photo files can be played. For
details of operations on each file, refer to relevant
pages.
When you connect the USB device on the HOME
menu, the player plays an audio file contained in
the USB storage device automatically. If the USB
storage device is containing various types of files, a
menu for the file type selection will appear.
Regular back up is recommended to prevent
data loss.
y
y
4
If you use an USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
File loading may takes few minutes depending on
the number of content stored in the USB storage
device. Press ENTER (b) while [Cancel] is selected
to stop loading.
Some USB device may not work with this unit.
y
y
Digital camera and mobile phone are not
supported.
2. Press HOME ( ).
USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
y
3. Select [Smart Share] and press ENTER (b).
4. Select the desired linked device in the category.
5. Select [Movie], [Photo] or [Music].
6. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
32 Operating
Note
,
Playing a file on a network
server
yui
This player can play video, audio and photo files
located in a DLNA server through your home
network.
The file requirements are described on page
y
y
The thumbnail of the unplayable files can
be displayed, but those cannot be played
on this player.
The subtitle file name and video file name
have to be the same and located at the
same folder.
y
1. Check the network connection and settings
The playback and operating quality may be
affected by your home network condition.
y
y
y
2. Press HOME ( ).
3. Select [Smart Share] and press ENTER (b).
You may experience connection problems
depending on your server’s environment.
To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC.
4. Select a DLNA media server in the category.
5. Select [Movie], [Photo] or [Music].
4
6. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
Operating 33
MAC OS X
1. Start up your computer, and insert the supplied
CD-ROM disc into your computer’s CD-ROM
drive.
Using Home Network
Server for PC
2. Browse the CD-ROM drive and open the
“MediaHome_4_Essentials_MAC”folder.
DLNA stands for Digital Living Network Alliance,
which allows users to access video, photo and
audio files stored in server and enjoy them on TV
via home networking.
3. Double-click the“Nero MediaHome.dmg”image
file. The Nero MediaHome window is opened.
Before connecting to PC to play a file , Nero
MediaHome 4 Essentials program should be
installed on your PC.
4. In the Nero MediaHome window, drag the Nero
MediaHome icon either to the Applications
folder within the window or to any other
desired location.
Installing Nero MediaHome 4
Essentials
5. You can now start the application by double-
clicking the Nero MediaHome icon in the
location you dragged it to.
Windows
Sharing files and folders
On your computer, you must share the folder
contained video, audio and/or photo content to
play them on this player.
Start up your computer, and insert the supplied CD-
ROM disc into your computer’s CD-ROM drive. An
installation wizard will walk you through the quick
and uncomplicated installation process. To install
Nero MediaHome 4 Essentials, proceed as follows:
4
This parts explains the procedure for selecting the
shared folders on your computer.
1. Close all Microsoft Windows programs and exit
any anti-virus software that may be running.
1. Double-click the“Nero MediaHome 4 Essentials”
icon.
2. Insert the supplied CD-ROM disc into your
computer’s CD-ROM drive.
2. Click [Network] icon on the left and define your
network name in the [Network name] field. The
Network name you enter will be recognized by
your player.
3. Click [Nero MediaHome 4 Essentials].
4. Click [Run] to start installation.
5. Click [Nero MediaHome 4 Essentials]. The
installation is prepared and the installation
wizard appears.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares] screen.
6. Click the [Next] button to display the serial
number input screen. Click [Next] to go to the
next step.
5. Click [Add] icon to open the [Browse Folder]
window.
6. Select the folder containing the files you want
to share. The selected folder is added to the list
of shared folders.
7. If you accept all conditions, click [I accept
the License Conditions] check box and click
[Next]. Installation is not possible without this
agreement.
7. Click [Start Server] icon to start the server.
8. Click [Typical] and click [Next]. The installation
process is started.
Note
,
If the shared folders or files are not displayed
on the player, click the folder on the [Local
Folders] tab and click [Rescan Folder] at the
[More] button.
y
y
9. If you want to take part in the anonymous
collection of data, select the check box and click
the [Next] button.
10. Click the [Exit] button to complete the
installation.
and software tools.
34 Operating
About Nero MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for
sharing video, audio and photo files stored on your
computer to this unit as a DLNA-compatible digital
media server.
System requirements
Windows PC
Windows® XP (Service Pack 2 or higher), Windows
Vista® (no Service Pack required), Windows® 7
(no Service Pack required), Windows® XP Media
Center Edition 2005 (Service Pack 2 or higher),
Windows Server® 2003
y
Note
,
The Nero MediaHome 4 Essentials CD-
ROM is designed for PCs and should not
be inserted in this player or in any product
other than a PC.
y
y
y
y
Windows Vista® 64-bit edition (application runs
in 32-bit mode)
y
y
y
Windows® 7 64-bit edition (application runs in
32-bit mode)
The supplied Nero MediaHome 4 Essentials
CD-ROM is a customized software edition
only for sharing files and folders to this
player.
Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome stand-
alone
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
y
The supplied Nero MediaHome 4 Essentials
software does not support following
functions: Transcoding, Remote UI, TV
control, Internet services and Apple iTunes.
Memory: 256 MB RAM
y
y
Graphics card with at least 32 MB video memory,
minimum resolution of 800 x 600 pixels, and 16-
bit color settings
4
The supplied Nero MediaHome 4 Essentials
software can be downloaded at
Windows® Internet Explorer® 6.0 or higher
DirectX® 9.0c revision 30 (August 2006) or higher
Network environment: 100 Mb Ethernet, WLAN
y
y
y
-
download.php?id=nmhlgewin
-
download.php?id=nmhlgemac
Macintosh
This manual explains operations with
the English version of Nero MediaHome
4 Essentials as examples. Follow the
explanation referring to the actual
operations of your language version.
y
Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard)
y
y
y
Macintosh computer with an Intel x86 processor
Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome stand-
alone
Memory: 256 MB RAM
y
Operating 35
Basic operations for photo
content
General Playback
To play a slide show
Press d(PLAY) to start slide show.
Basic operations for video and
audio content
To stop a slide show
Press Z(STOP) while slide show.
To stop playback
Press Z(STOP) during playback.
To pause a slide show
Press M(PAUSE) while slide show.
Press d(PLAY) to re-start the slide show.
To pause playback
Press M(PAUSE) during playback.
Press d(PLAY) to resume playback.
To skip to the next/previous photo
While viewing a photo in full screen, press Aor D
to go to the previous or next photo.
To play frame-by-frame (Video)
Press M(PAUSE) during video playback.
Press M(PAUSE) repeatedly to play Frame-by-Frame
playback.
Using the disc menu
ero
4
To scan forward or backward
Press cor vto play fast forward or fast reverse
during playback.
To display the disc menu
You can change the various playback speeds by
pressing cor vrepeatedly.
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu during playback, press
DISC MENU.
To slow down the playing speed
While the playback is paused, press vrepeatedly
to play various speeds of slow motion.
Use W/S/A/Dbuttons to navigate through
menu items.
To skip to the next/previous
chapter/track/file
During playback, press Cor Vto go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears during playback.
Press TITLE/POPUP during playback, and use W/
S/A/Dbuttons to navigate through menu
items.
Press Ctwice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have
many types of content in a folder together. In this
case, press Cor Vto go to the previous or
next content with same type.
36 Operating
Resume playback
Last scene memory
eroyt
u
er
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
The unit records the point where you pressed the
Z(STOP) depending on the disc.
If“MZ(Resume Stop)”appears on the screen briefly,
press d(PLAY) to resume playback (from the scene
point).
If you press Z(STOP) twice or unload the disc,
“Z(Complete Stop)”appears on the screen. The unit
will clear the stopped point.
Note
,
Last Scene Memory function for a previous
disc is erased once a different disc is played.
y
y
y
y
This function may not work depending on
the disc.
Note
,
The resume point may be cleared when a
button is pressed (for example; 1(POWER),
B(OPEN/CLOSE), etc).
y
On BD-ROM discs with BD-J, the last scene
memory function does not work.
This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
On BD-ROM discs with BD-J, the resume
playback function does not work.
y
y
If you press Z(STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode.
4
Operating 37
Displaying content information on-
screen
On-Screen Display
You can display and adjust various information and
settings about the content.
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
To control video playback
ENTER (b).
eroy
You can control playback and set options while
watching videos.
During playback, press INFO/MENU (m).
4
a Title – Current title number/total number of
a Progress bar - Displays the current position
titles.
and total playing time.
b Chapter – Current chapter number/total
b [Disc Menu] - Accesses menu on a disc.
number of chapters.
c [Title/Popup] - Displays the DVD title menu
c Time – Elapsed playing time/total playback
or BD-ROM’s pop-up menu, if available.
time.
d [Option] - Displays playback information.
d Audio – Selected audio language or channel.
e [Repeat] - Repeats a desired section or
e Subtitle – Selected subtitle.
sequence. (page 39)
f Angle – Selected angle/total number of
f [3D] - Adjusts the 3D setting. (page 43)
angles.
g TV Aspect Ratio – Selected TV aspect ratio.
h Picture Mode – Selected picture mode.
38 Operating
Note
,
Setting the slide show option
You can use various options during viewing a
photo in full screen.
If no button is pressed for a few seconds,
the on-screen display disappears.
y
y
y
y
A title number cannot be selected on some
discs.
1. While viewing pictures, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
Available items may differ depending on
discs or titles.
ENTER (b)
If an interactive Blu-ray Disc is playing back,
some setting information is displayed on
the screen but prohibited to be changed.
To control photo view
Controls playback and sets options while viewing
pictures in full screen.
You can control playback and set options while
viewing pictures in full screen.
a [Speed] - Use A/Dto select a delaying
While viewing pictures, press INFO/MENU (m).
speed between photos in a slide show.
4
b [Effect] - Use A/Dto select a transition
effect between photos in a slide show.
c [Music Select] – Select the background music
for the slide show (page 43).
a [Slideshow] - Starts or pause slide show.
b [Music] - Select the background music for the
slide show (page 43).
c [Option] - Displays slide show options.
d [Rotate] - Rotates the photo clockwise.
e [Zoom] - Displays the [Zoom] menu.
Operating 39
Repeating a specific portion
eroty
This player can repeat a portion you have selected.
Advanced Playback
Repeat playback
1. During playback, press REPEAT (h) to select
[A-B] and press ENTER (b) at the beginning of
the portion you wish to repeat.
erotu
y
2. Press ENTER (b) at the end of the portion. Your
Blu-ray Disc / DVD / Video files
selected portion will be repeated continually.
During playback, press REPEAT (h) to select a
3. To return to normal playback, press CLEAR.
desired repeat mode.
Note
,
A-B – Selected portion will be repeated continually.
You cannot select a portion less than 3
seconds.
y
y
Chapter – The current chapter will be played back
repeatedly.
This function may not work on some disc or
title.
Title – The current title will be played back
repeatedly.
All – All the titles or files will be played back
repeatedly.
Playing from selected time
eroy
1. During playback, press INFO/MENU (m).
Off – Returns to normal playback.
To return to normal playback, press CLEAR.
Audio CDs/Audio files
4
2. Select an [Option] using A/D, and press
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
ENTER (b)
3. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
– Selected portion will be repeated continually.
(Audio CD only)
Track– The current track or file will be played
back repeatedly.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter“21020”.
All – All the tracks or files will be played back
repeatedly.
Press A/Dto skip the playback 60 seconds
forward or backward.
All – All the tracks or files will be played
back repeatedly in random order.
4. Press ENTER (b) to start playback from selected
time.
– The tracks or files will be played back in
random order.
Note
,
This function may not work on some disc or
titles.
y
y
To return to normal playback, press CLEAR.
This function may not work depending on
the file type and ability of the DLNA server.
Note
,
This function may not work on some disc or
title.
40 Operating
Selecting a subtitle language
eroy
1. During playback, press INFO/MENU (m).
Watching from a different
angle
er
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
2. Select an [Option] using A/D, and press
ENTER (b)
3. Use W/Sto select the [Subtitle] option.
1. During playback, press INFO/MENU (m).
4. Use A/Dto select desired subtitle language.
2. Select an [Option] using A/D, and press
By pressing ENTER (b), you can set various
subtitle options.
ENTER (b)
3. Use W/Sto select the [Angle] option.
4. Use A/Dto select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Note
,
5. Press BACK (1) to exit the On-Screen display.
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
4
Hearing a different audio
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
eroy
ENTER (b)
1. During playback, press INFO/MENU (m).
3. Use W/Sto select the [TV Aspect Ratio]
2. Select an [Option] using A/D, and press
option.
ENTER (b)
4. Use A/Dto select desired option.
3. Use W/Sto select the [Audio] option.
5. Press BACK (1) to exit the On-Screen display.
4. Use A/Dto select desired audio language,
Note
audio track or audio channel.
,
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
Note
,
Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POPUP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
y
Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
y
y
On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
Operating 41
Setting the [User setting] option
1. During playback, press INFO/MENU (m).
Changing subtitle Code Page
y
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
2. Select an [Option] using A/D, and press
ENTER (b)
4. Use W/Sto select the [Picture Mode] option.
5. Use A/Dto select the [User setting] option,
1. During playback, press INFO/MENU (m).
and press ENTER (b).
2. Select an [Option] using A/D, and press
ENTER (b)
3. Use W/Sto select the [Code Page] option.
4. Use A/Dto select desired code option.
6. Use W/S/A/Dto adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
4
7. Use W/S/A/Dto select the [Close] option,
and press ENTER (b) to finish setting.
5. Press BACK (1) to exit the On-Screen display.
Viewing content information
Changing the Picture Mode
eroy
You can change the [Picture mode] option during
playback.
y
The player can display the content information.
1. Select a file using W/S/A/D.
2. Press INFO/MENU (m) to display the option
1. During playback, press INFO/MENU (m).
menu.
2. Select an [Option] using A/D, and press
The file information appears on the screen.
ENTER (b)
During video playback, you can display the file
information by pressing TITLE/POPUP.
3. Use W/Sto select the [Picture Mode] option.
4. Use A/Dto select desired option.
Note
,
5. Press BACK (1) to exit the On-Screen display.
The information displayed on the screen
may not correct comparing actual content
information.
42 Operating
Changing content list view
Selecting a subtitle file
yui
y
On the [Smart Share] menu, you can change the
content list view.
If the subtitle file name is different from the video
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
Press red (R) colored button repeatedly.
1. Use W/S/A/Dto select the subtitle file you
wish to play in the [Movie] menu.
2. Press ENTER (b).
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the video file.
4
Note
,
If you press Z(STOP) during playback, the
y
y
subtitle selection is cancelled.
This function is not available for playing file
on a server via home network.
Operating 43
Listening to music during slide Setting the [3D] option
show
i
y
This function allows you to play 3D content in case
of file encorded in 3D.
You can display photo files while listening to audio
files.
1. During playback, press INFO/MENU (m).
2. Select [3D] using A/D, and press ENTER (b)
3. Use W/S/A/Dto select desired options.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an [Option] using A/D, and press
You can adjust 3D’s depth and distance on the
[3D Setting] option.
ENTER (b).
3. Use W/Sto select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
On [3D Setting], select [Init] option then press
ENTER (b) to reset the all adjustments.
4. Use W/Sto select a device, and press ENTER
(b).
Available device may differ depending on the
location of the current photo file.
Photo location
Disc, USB
Available Device
Disc, USB
4
DLNA server
DLNA server
5. Use W/Sto select a file or a folder you wish to
play.
Select gand press ENTER (b) to display the
upper directory.
Note
,
When selecting audio file from a server, folder
selection is not available. Only file selection is
available.
6. Use Dto select [OK], and press ENTER (b) to
complete music selection.
44 Operating
To select a server from the device list, files or
folders must be shared by DLNA server from the
connected Wi-Fi Direct™ device.
Advanced Features
Wi-Fi Direct™
6. Select [Movie], [Photo] or [Music] using W/S/
A/D, and press ENTER (b).
Connecting to a Wi-Fi Direct™
certified device
yui
This player can play movie, music and photo files
located in a Wi-Fi Direct™ certified device. The Wi-Fi
Direct™ technology make the player to be directely
connected to a Wi-Fi Direct™ certified device
without connecting to a network device such as an
access point.
7. Select a file using W/S/A/D, and press
ENTER (b) to play the file.
On Wi-Fi Direct™ certified device
Note
,
1. Turn on the Wi-Fi Direct™ certified device and
run its Wi-Fi Direct function.
For the purpose of the better transmission,
placing the player from the Wi-Fi Direct™
certified server as close as possible.
y
2. Run DLNA application on the device.
4
This unit can connect only 1 device at a
time. Multiple connection is not available.
y
y
On your player
3. Select [NETWORK] option in the [Settings]
If you try to connect wireless network while
a device is connected by Wi-Fi Direct™
function , Wi-Fi Direct™ connection will be
force disconnected.
menu then press ENTER (b).
4. Select [Wi-Fi Direct] option, and press ENTER
(b).
If this player and a Wi-Fi Direct™ device
are connected to the different local area
network, Wi-Fi Direct™ connection may not
available.
y
If a Wi-Fi Direct™ certified device is not in
Wi-Fi direct standby mode, this product
cannot find the device.
y
y
When you connect a Wi-Fi Direct™
certified device to your player, PIN network
connection is not supported.
5. Select a Wi-Fi Direct™ device on the list using
W/S, and press ENTER (b).
Wi-Fi Direct™ connection will be proceeded.
follow the procedure on the screen.
If you want to rescan available Wi-Fi Direct™
device, Select the [Refresh List] and press ENTER
(b).
Operating 45
Caution
>
Enjoying BD-Live™
Do not extract the connected USB device
while content is being downloaded or a Blu-
ray disc is still in the disc tray. Doing so may
damage the connected USB device and BD-
Live features may not operate properly with
the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
e
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers
by connecting this unit to the internet.
1. Check the network connection and settings
2. Insert an USB storage device to the USB port on
the front panel.
An USB storage device is needed to download
bonus content.
Note
,
Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
y
3. Press HOME ( ), and set the [BD-LIVE
connection] option on the [Settings] menu
It may take up to several minutes to load
and start enjoying BD-Live content.
y
y
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option
is set to [Partially Permitted].
For BD-Live, use the USB flash drive /
external HDD formatted in FAT32 only.
4
4. Insert a BD-ROM with BD-Live.
The operations may differ depending on the
disc. Refer to the manual supplied with the disc.
LG AV Remote
You can control this player with your iPhone
or Android phone via your home network. This
player and your phone must be connected to your
wireless network device such as access point. Visit
“Apple iTunes”or“Google Android Market (Google
Play Store)”for detailed information of“LG AV
Remote”.
Private Sound Mode
By downloading“LG AV Remote”application on
your smart phone or tablet, you can connect your
headsets, and enjoy the sound from your player on
your smart devices.
This feature transmits video signal to TV through
HDMI and Audio signal to smart phone or tablet
through Wi-Fi. For more detailed information,
please refer to the Help menu on“LG AV Remote”
application.
46 Operating
Caution
The recording or copying features on this
player are provided for your personal and
non-commercial use. The making of
>
Audio CD recording
You can record one desired track or all of the tracks
in Audio CD to an USB storage device.
1. Insert an USB storage device to the USB port on
the front panel.
unauthorized copies of copy-protected
material, including computer programs, files,
broadcasts and sound recordings, may be an
infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes. LG expressly disclaims
any responsibility for illegal distribution or
use of unauthorized content in commercial
purpose.
2. Insert an Audio CD into the player.
The playback starts automatically.
3. Press red (R) colored button to start [CD
Recording].
During
Stop mode
playback
Be Responsible
Recording
track
Respect Copyrights
All of the tracks
4X speed
playing track
Recording
time
normal
speed.
Note
,
4
For audio CD recording, use the USB flash
drive / external HDD formatted in FAT32
only.
y
Audio track is recorded to an audio file with
192 kbps.
y
y
y
Recording times in the table above are
approximate.
Actual recording time for USB storage
device varies depending on the USB storage
device’s ability.
Make sure that there is minimum of 50 MB
free space is needed when recording into
the USB storage device.
y
The length of the audio should be longer
than 20 seconds for the proper recording.
y
y
Do not turn off this player or extract the
connected USB storage device during Audio
CD recording.
Operating 47
Using the Premium
You can use various content services via Internet
with the Premium feature.
Using the LG Smart
World
You can use the LG application services on
this player via Internet. You can easily find and
download various applications from LG Smart
World.
1. Check the network connection and settings
2. Press HOME ( ).
3. Select the [Premium] using A/D, and press
1. Check the network connection and settings
ENTER (b).
2. Press HOME ( ).
3. Select the [LG Smart World], and press ENTER
(b).
4. Select an online service using W/S/A/D,
and press ENTER (b).
Note
,
4. Select a category using A/D, and press ENTER
For detailed information of each service,
contact to the content provider or visit
support link of the service.
y
y
4
(b).
5. Use W/S/A/Dto select an application, and
press ENTER (b) to display the information.
The content of Premium services and
service related information, including user
interface, is subject to changes. Please refer
to the web site of each service for most up-
to-date information.
6. Press ENTER (b) while [Install] icon is
highlighted. The application will be installed to
the player.
To install an application to the player, user
information of signning in.
Using Premium features with wireless
network connection may result in improper
streaming speed by interference from
household devices that are using radio
frequencies.
y
y
7. Press yellow (Y) colored button to display the
[My Apps] screen.
8. Select the installed application and press ENTER
For the first time to access [Premium] or
[LG Smart World] feature, current country
setting appears. If you want to change
the country setting, select [Edit] and press
ENTER (b).
(b) to excute it.
Note
,
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
y
y
To install a paid application, you need to be
more information.
48 Operating
Signing in
Searching online content
To use the [LG Smart World] feature, you need to
sign in with your account.
If you are having difficulties finding specific content
from online services, you can use the all-in-one
search function by entering keywords in the
[Search] menu.
1. On the [LG Smart World] or [My Apps] screen,
press red (R) colored button.
1. Press HOME ( ).
2. Fill the [ID] and [Password] field using the virtual
keyboard.
2. Select the [Search] icon on the home menu
using W/S/A/D, and press ENTER (b).
If you do not have an account, press red (R)
colored button to register.
The [Search] menu appears on the screen with
virtual keyboard.
3. Use W/S/A/Dto select [OK], and press
ENTER (b) to sign in with your account.
3. Use
W/S/A/D
to select letters then press
ENTER (b) to confirm your selection on the
virtual keyboard.
If you select the [Auto Sign In] check box,
your ID and password are remembered and
automatically signed in without entering them.
4. When you finish entering the keyword, select
[OK] and press ENTER (b) to display search
result.
Note
,
If you want to sign in with other account,
press red (R) colored button on [LG Smart
World] or [My Apps] screen, and select
[Change User] option.
y
y
5. Use W/S/A/Dto select a desired content,
and press ENTER (b) to move to the selected
content directly.
4
Note
To view the information of your account and
applications, press red (R) colored button on
[LG Apps] or [My Apps] screen, and select
[Account Setting] option.
,
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
y
y
The [Search] function does not search
content in every online services. It works
only in certain online services.
Operating 49
Using the My Apps
Menu
You can move or delete an installed application in
the [My Apps] menu.
1. Press HOME ( ).
2. Select the [My Apps], and press ENTER (b).
Move an application
1. Select an application, and press green (G)
colored button to display the options.
2. Use W/Sto select [Move], and press ENTER
4
(b).
3. Use W/S/A/Dto select a position you want
to move to, and press ENTER (b).
Delete an application
1. Select an application, and press green (G)
colored button to display the options.
2. Use W/Sto select [Delete], and press
ENTER(b).
3. Use A/Dto select [Yes], and press ENTER (b)
to confirm.
Note
,
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
50 Troubleshooting
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turned on.
Plug the power cord into the wall outlet securely.
y
The unit does not start
playback.
Insert a playable disc. (Check the disc type, color system, and regional
code.)
y
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
y
y
y
y
Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
y
y
y
y
If you use an USB extension cable or USB HUB, the USB devices may
not be recognized.
An USB device which requires additional program installation when
you have connected it to a computer is not supported.
This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
5
The angle cannot be changed.
Multi-angles are not recorded on the DVD Video being played.
y
Cannot play video, photo or
audio files.
The files are not recorded in a format that the unit can play.
The unit does not support the codec of the video file.
y
y
The remote control does not
work properly.
The remote control is not pointed at the remote sensor of the unit.
The remote control is too far from the unit.
y
y
y
y
There is an obstacle in the path of the remote control and the unit.
The batteries in the remote control are exhausted.
The unit is plugged in, but the You can reset the unit as follows.
power will not turn on or off.
Unplug the power cord, wait at least five seconds, and then plug it in
y
again.
The unit is not operating
normally.
Troubleshooting 51
Network
Symptom
Cause & Solution
BD-Live feature does not work.
The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
y
y
y
Ensure that the unit is correctly connected to the local area network
and can access the internet (page 16).
Your broadband speed may not fast enough to use the BD-Live
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
The [BD-LIVE connection] option in the [Settings] menu is set to
[Prohibited]. Set the option to [Permitted].
y
y
Streaming video services (such
as YouTube™, etc.) are often
stopped or“buffer”during
playback.
Your broadband service speed may not be fast enough to stream
video services. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
Media servers are not displayed
on the device list.
The firewall or anti-virus software on your media server is running.
Turn off the firewall or anti-virus software running on your media
server.
y
The player is not connected to the local area network that your media
server is connected.
y
y
Cannot connect the player to
the access point or wireless
LAN router.
The wireless communication may be interrupted from household
devices that are using radio frequencies. Move the player away from
them.
5
Access point is not displayed
on the“Access point name”list.
The access point or wireless LAN router may not broadcast its SSID.
Set your access point to broadcast its SSID through your computer.
y
y
Your network device such as access point may not set with available
frequency range and channel that this player can support.
Try setting the frequency range and channel on the network device
setting.
52 Troubleshooting
Picture
Symptom
Cause & Solution
There is no picture.
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
y
Connect the video connection securely.
y
y
Check the [HDMI Color Setting] in the [Settings] menu is set to the
appropriate item that conforms to your video connection.
Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
y
y
The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears
You are playing a disc recorded in a colour system that is different
from your TV.
y
Set the resolution which your TV accepts.
y
y
Blu-ray 3D disc playback does
not output 3D views.
Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable).
Your TV may not support“HDMI 3D mandatory format”.
y
y
The [3D Mode] option in the [Settings] menu is set to [Off].
Set the option to [On].
5
Customer support
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
Open source software notice
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit
available to download with the source code.
Appendix 53
Setting up the remote to
Controlling a TV with
the Supplied Remote
Control
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
You can control your TV using the buttons below.
1. While holding down 1(TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the table
below).
Manufacturer
LG
Code number
1(Default), 2
Zenith
1, 3, 4
1, 2
6, 7
8, 9
4
GoldStar
Samsung
Sony
By pressing
You can
1(TV POWER)
Turn the TV on or off.
Switch the TV’s input source
between the TV and other
input sources.
INPUT
Hitachi
2. Release the 1(TV POWER) button to complete
VOL +/–
Adjust the volume of the TV
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Note
,
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
6
54 Appendix
Software update
Network Software
Update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
Network update notification
Note
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
,
Before updating the software in your player,
remove any disc and USB Device from the
player.
y
Before updating the software in your player,
turn the player off and then turn it back on.
y
y
During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
Option 1:
1. The update menu will appear on the screen
when you turn off the player.
If you cancel the update, turn off the power
and turn it on for stable performance.
y
y
2. Use A/Dto select a desired option and then
This unit cannot be updated to previous
software version.
press ENTER (b).
1. Check the network connection and settings
2. Select [Software] option in the [Settings] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
[OK]
Starts the software update.
6
Exits the update menu and turns
the power off.
[Cancel]
Option 2:
The player will check for the newest update.
If the software update is available from the update
server, the“Update”icon appears in the Home
menu. Press blue (B) colored button to start the
update procedure.
Note
,
Pressing ENTER (b) while checking for the
y
y
update will end the process.
If there is no update available, the Message,
“No update is found.”appears. Press ENTER
(b) to return to the [Home Menu].
Appendix 55
4. If newer version exists, the message“Do you
want to download it?”appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your home
network condition)
7. When downloading is completed, the message,
“Download is complete. Do you want to
update?”appears.
8. Select [OK] to start updating. (Selecting [Cancel]
will end the update and downloaded file will
not be re-usable. To update software the next
time, the software update procedure has to be
started from the beginning again.)
Caution
>
Do not turn off the power during the software
update.
Note
,
If the software includes the driver update, disc
tray may open during the process.
9. When update is completed, the power will be
turned off automatically in a few seconds.
10. Turn the power back on. The system now
operates with the new version.
Note
6
,
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
56 Appendix
Additional Information
File requirement
Video files
File
Location
File
Extension
Audio
Format
Codec Format
Subtitle
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v”(DRM
free), “.vob”, “.3gp”,
“.mov”, “.trp”, “.m2t”,
“.mpe”, “.m1v”, “.m2v”,
“.wm”, ”.flv”, “.ts”, “.dat”
XVID, MPEG1 SS, Dolby
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub (.sub),
H.264/MPEG-4
AVC, MPEG2 PS,
MPEG2 TS, VC-1
SM (WMV3)
Digital,
DTS, MP3,
Disc,
USB
WMA, AAC, SubViewer 1.0 (.sub), SubViewer
AC3
2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v”(DRM
free), “.3gp”, “.mov”,
“.trp”, “.m2t”, “.mpe”,
“.m1v”, “.m2v”, ”.flv”, “.ts”,
“.dat”
XVID, MPEG1 SS, Dolby
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), SubViewer
H.264/MPEG-4
AVC, MPEG2 PS,
MPEG2 TS, VC-1
SM (WMV3)
Digital,
DTS, MP3,
DLNA
WMA, AAC, 1.0 (.sub), SubViewer 2.0 (.sub/.txt),
AC3
TMPlayer (.txt), DVD Subtitle System
(.txt)
Audio files
File
Location
File
Extension
Sampling Frequency
Bitrate
within 32 - 192 kbps
(WMA), within 32 - 320 not supported on
kbps (MP3)
Note
6
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
Some wav files are
Disc,
USB
this player.
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free)
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320 not supported on
kbps (MP3)
Some wav files are
DLNA
this player.
Photo files
File
Location
File
Extension
Recommended
Size
Note
Disc,
USB,
DLNA
“.jpg”, “.jpeg”,
“.png”, “.gif”
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
are not supported.
Supplied bundle DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA
and WMV.
y
Appendix 57
Note
Note
,
,
The file name is limited to 180 characters.
y
y
A“avi”file which is encoded“WMV 9 codec”
is not supported.
y
y
Maximum files/Folder: Less than 2000 (total
number of files and folders)
This player supports UTF-8 files even it
contains Unicode subtitle content. This
player can not support the pure Unicode
subtitle files.
Depending on the size and number of the
files, it may take several minutes to read the
content on the media.
y
Depending on the types of file or ways of
recording, it may not play back.
y
y
File compatibility may differ depending on
the server.
y
y
A disc which was recorded by multi-session
on normal PC is not supported on this
player.
Because the compatibility on DLNA server
are tested on the bundle DLNA server
(Nero MediaHome 4 Essentials Windows
edition) environment, file requirements and
playback functions may differ depending on
media servers.
To be playback a video file, video file name
and Subtitle file name must be the same.
y
y
When you play a video file with a extension
such as“.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp”or“.m2t”,
your player may not support subtitle files.
not always compatible. There may have
some restrictions by file features and media
server’s ability.
y
y
y
The total playback time of audio file
indicated on the screen may not correct for
VBR files.
y
y
Playing video subtitle files are only available
on DLNA media server created by supplied
Nero MediaHome 4 Essentials software on
this player package.
Video / Audio codec compatibility may
differ depending on video file.
The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
AVCHD (Advanced Video
Codec High Definition)
This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
This unit cannot support the ID3 Tag
embedded MP3 file.
y
y
y
The total playback time of audio file
indicated on the screen may not correct for
VBR files.
6
The AVCHD format is a high definition digital
video camera format.
y
y
HD video files contained on the CD/DVD or
USB 1.0/1.1 may not played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD video files.
y
The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. A file with
higher level may not be supported.
y
y
This player can playback AVCHD discs using
“x.v.Color”format.
y
y
This player does not support files that are
Some AVCHD format discs may not play
depending on the recording condition.
2
recorded with GMC 1 or Qpel
.
*
*
AVCHD format discs need to be finalized.
y
y
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
“x.v.Color”offers a wider color range than normal
DVD camcorder discs.
58 Appendix
About DLNA
Compatibility notes
This Player is a DLNA Certified digital media player
that can display and play video, photo and audio
content from your DLNA-compatible digital media
server (PC and Consumer Electronics).
Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
y
The Digital Living Network Alliance (DLNA) is a
cross-industry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing
of digital media through your home network.
This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-in-
picture function. For the playback method, refer
to the instructions in the disc.
y
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies with
DLNA Interoperability Guidelines v1.5.
Viewing high-definition content and up-
converting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
y
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software or
other devices may be required. Please refer to the
operating instructions for the software or device for
more information.
Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
y
y
Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection for the audio output of the
unit.
Certain system requirements
For high definition video playback:
High definition display that has HDMI input jack.
BD-ROM disc with high definition content.
y
y
y
You can use an USB device to store some disc
related information, including downloaded
online content. The disc you are using will
control how long this information is retained.
y
HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
6
An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
y
Main, center, surround speakers and subwoofer
as necessary for chosen format.
y
Appendix 59
Audio Output Specifications
3
Jack/Setting
COAXIAL (DIGITAL AUDIO OUT)
*
Source
4
BitStream
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS Re-encode
*
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
Dolby Digital
Dolby Digital
Dolby Digital
DTS
DTS-HD
DTS
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
PCM 2ch
PCM 2ch
Jack/Setting
Source
HDMI OUT
4
1
2
BitStream
* *
PCM Stereo
PCM Multi-Ch
PCM 2ch
DTS Re-encode
*
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
Dolby Digital
PCM 2ch
Dolby Digital Plus
Dolby TrueHD
DTS
PCM 2ch
PCM 2ch
DTS-HD
PCM 2ch
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 5.1ch
PCM 7.1ch
6
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [BitStream]. (Except
LPCM Codec : the output always include
interactive and secondary audio.)
*4 If the [Digital Output] option is set to [DTS re-
encode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[BitStream]).
*2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDMI device even though
[Digital Output] option is set to [BitStream].
If the HDMI OUT jack is connected to your TV
with High Speed HDMI™ Cable and Dolby Digital
Plus/Dolby TrueHD is outputted from HDMI OUT
jack, DIGITAL AUDIO OUT jack is limited to“PCM
2ch”(When the HDMI and DIGITAL AUDIO OUT
are connected simultaneously).
y
*3 On the PCM audio output, the sampling
frequency of DIGITAL AUDIO OUT is limited to
96 kHz.
60 Appendix
The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio
CD during playback.
y
y
You must select a digital audio output and
a maximum sampling frequency that your
Amplifier (or AV receiver) accepts using [Digital
Output] and [Sampling Freq.] options on the
With digital audio connection (DIGITAL AUDIO
OUT or HDMI OUT), Disc Menu button sounds of
BD-ROM may not be heard if the [Digital Output]
option is set to [BitStream].
y
y
y
If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver
is equipped with a Digital Multi-channel decoder.
6
Appendix 61
Area Code List
Choose an area code from this list.
Area
Code Area
AF Fiji
Code Area
FJ Monaco
Code Area
Code
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
Singapore
Slovak Republic
SG
Afghanistan
Argentina
Australia
Austria
FI Mongolia
FR Morocco
DE Nepal
SK
SI
AR Finland
AU France
AT Germany
BE Great Britain
BT Greece
BO Greenland
BR Hong Kong
KH Hungary
CA India
Slovenia
South Africa
South Korea
Spain
ZA
KR
Belgium
Bhutan
GB Netherlands
GR Antilles
GL New Zealand
HK Nigeria
HU Norway
IN Oman
ES
Sri Lanka
Sweden
LK
Bolivia
SE
Brazil
Switzerland
Taiwan
CH
TW
TH
TR
Cambodia
Canada
Chile
ID Pakistan
IL Panama
Thailand
Turkey
CL Indonesia
CN Israel
China
PA
IT Paraguay
JM Philippines
JP Poland
PY
Uganda
UG
UA
US
UY
UZ
VN
ZW
Colombia
Congo
CO Italy
PH
PL
Ukraine
CG Jamaica
CR Japan
United States
Uruguay
Uzbekistan
Vietnam
Costa Rica
Croatia
HR Kenya
KE Portugal
KW Romania
LY Russian
PT
Czech Republic
Denmark
Ecuador
Egypt
CZ Kuwait
DK Libya
RO
Federation
RU
SA
SN
LU
Zimbabwe
EC Luxembourg
EG Malaysia
SV Maldives
ET Mexico
Saudi Arabia
MY
6
Senegal
El Salvador
Ethiopia
MV
MX
62 Appendix
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Afar
Code Language
6565 French
6570 Frisian
Code Language
7082 Lithuanian
7089 Macedonian
7176 Malagasy
7565 Malay
Code Language
Code
8368
8373
8375
8376
6983
8385
8387
8386
8476
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Sindhi
Singhalese
Slovak
Afrikaans
Albanian
Amharic
Arabic
8381 Galician
6577 Georgian
6582 German
7289 Greek
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
6869 Malayalam
6976 Maori
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
6583 Greenlandic
6588 Guarani
6590 Gujarati
6665 Hausa
7576 Marathi
7178 Moldavian
7185 Mongolian
7265 Nauru
7387 Nepali
Tamil
Basque
6985 Hebrew
6678 Hindi
7273 Norwegian
7285 Oriya
Telugu
Thai
Bengali; Bangla
Bhutani
Bihari
6890 Hungarian
6672 Icelandic
6682 Indonesian
6671 Interlingua
7789 Irish
7383 Panjabi
Tonga
7378 Pashto, Pushto
7365 Persian
Turkish
Turkmen
Twi
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Croatian
Czech
7165 Polish
7384 Portuguese
7465 Quechua
Ukrainian
Urdu
6669 Italian
9072 Japanese
7282 Kannada
6783 Kashmiri
6865 Kazakh
7876 Kirghiz
6978 Korean
6979 Kurdish
6984 Laotian
7079 Latin
6
7578 Rhaeto-Romance 8277
Uzbek
7583 Rumanian
7575 Russian
7589 Samoan
7579 Sanskrit
7585 Scots Gaelic
7679 Serbian
7665 Serbo-Croatian
7686 Shona
8279
8285
8377
8365
7168
8382
8372
8378
Vietnamese
Volapük
Welsh
Danish
Dutch
Wolof
English
Xhosa
Esperanto
Estonian
Faroese
Fiji
Yiddish
Yoruba
Zulu
7074 Latvian, Lettish
7073 Lingala
Finnish
7678
Appendix 63
Trademarks and
Licenses
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol together are
registered trademarks & DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
“DVD Logo”is a trademark of DVD Format/Logo
Licensing Corporation.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks
of the Digital Living Network Alliance.
Java is a trademark of Oracle and/or its affiliates.
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a trademark of
the Wi-Fi Alliance.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
6
“AVCHD”and the“AVCHD”logo are trademarks of
Panasonic Corporation and Sony Corporation.
“x.v.Color”is a trademark of Sony Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
64 Appendix
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commercially-
produced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
request additional information about Cinavia by
mail, send a postcard with your mailing address
to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2012
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
6
Appendix 65
Specifications
General
Power requirements
Power consumption
Dimensions (W x H x D)
Net Weight (Approx.)
Operating temperature
Operating humidity
Refer to main label on the rear panel.
12 W
Approx. 360 mm x 39.5 mm X 199 mm (14.1”x 1.5”x 7.8”)
1.4 kg (3.0 lbs)
5 °C to 35 °C (41 °F to 95 °F)
5 % to 90 %
Outputs
HDMI OUT (video/audio)
19 pin (Type A, HDMI™ Connector)
0.5 V (p-p), 75 Ω, RCA jack x 1
DIGITAL AUDIO OUT (COAXIAL)
System
Laser
Semiconductor laser
wavelength
405 nm / 650 nm
Signal system
Standard NTSC color TV system
Ethernet jack x 1, 10BASE-T / 100BASE-TX
IEEE 802.11b/g/n (2.4 GHz band)
DC 5 V 0500 mA
LAN port
Wireless LAN (internal antenna)
Bus Power Supply (USB)
Design and specifications are subject to change without notice.
y
6
66 Appendix
Notes on discs
Maintenance
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Keeping the exterior surfaces clean
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Do not use volatile liquids such as insecticide
spray near the unit.
y
y
y
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Maintaining the unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
6
Appendix 67
Important Information
relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a“Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-to-
date information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.
|