LG Electronics LG Lifes Good Blu ray Player BD660 User Manual
OWNER’S MANUAL  
Blu-ray Disc™/DVD Player  
Please read this manual carefully before operating  
your set and retain it for future reference.  
BD660  
P/NO : SAC35093911  
Getting Started  
3
Safety Information  
CAUTION  
CAUTION: This product employs a Laser System.  
To ensure proper use of this product, please read  
1
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
this owner’s manual carefully and retain it for future  
reference. Shall the unit require maintenance,  
contact an authorized service centre.  
Use of controls, adjustments or the performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
To prevent direct exposure to laser beam, do not try  
to open the enclosure. Visible laser radiation when  
open. DO NOT STARE INTO BEAM.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK DO NOT REMOVE COVER (OR BACK) NO  
USER-SERVICEABLE PARTS INSIDE REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL.  
This lightning flash with arrowhead  
symbol within an equilateral triangle  
is intended to alert the user to the  
presence of uninsulated dangerous  
voltage within the product’s  
CAUTION concerning the Power Cord  
Most appliances recommend they be placed upon  
a dedicated circuit;  
enclosure that may be of sufficient magnitude to  
constitute a risk of electric shock to persons.  
That is, a single outlet circuit which powers only  
that appliance and has no additional outlets or  
branch circuits. Check the specification page of this  
owner’s manual to be certain. Do not overload wall  
outlets. Overloaded wall outlets, loose or damaged  
wall outlets, extension cords, frayed power cords, or  
damaged or cracked wire insulation are dangerous.  
Any of these conditions could result in electric  
shock or fire. Periodically examine the cord of your  
appliance, and if its appearance indicates damage  
or deterioration, unplug it, discontinue use of the  
appliance, and have the cord replaced with an  
exact replacement part by an authorized service  
centre. Protect the power cord from physical or  
mechanical abuse, such as being twisted, kinked,  
pinched, closed in a door, or walked upon. Pay  
particular attention to plugs, wall outlets, and  
the point where the cord exits the appliance. To  
disconnect power from the mains, pull out the  
mains cord plug. When installing the product,  
ensure that the plug is easily accessible.  
The exclamation point within an  
equilateral triangle is intended  
to alert the user to the presence  
of important operating and  
maintenance (servicing)  
instructions in the literature accompanying the  
product.  
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK  
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN  
OR MOISTURE.  
WARNING: Do not install this equipment in a  
confined space such as a book case or similar unit.  
CAUTION: Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the  
product and to protect it from over heating. The  
openings shall be never be blocked by placing  
the product on a bed, sofa, rug or other similar  
surface. This product shall not be placed in a built-  
in installation such as a bookcase or rack unless  
proper ventilation is provided or the manufacturer’s  
instruction has been adhered to.  
4
Getting Started  
This device is equipped with a portable battery or  
accumulator.  
LG Electronics hereby declares that this/  
these product(s) is/are in compliance  
with the essential requirements and  
Safety way to remove the battery or the  
battery from the equipment: Remove the  
old battery or battery pack, follow the steps  
in reverse order than the assembly. To prevent  
contamination of the environment and bring on  
possible threat to human and animal health, the  
old battery or the battery put it in the appropriate  
container at designated collection points. Do  
not dispose of batteries or battery together with  
other waste. It is recommended that you use  
local, free reimbursement systems batteries and  
accumulators. The battery shall not be exposed to  
excessive heat such as sunshine, fire or the like.  
other relevant provisions of Directive 2004/108/EC,  
2006/95/EC and 2009/125/EC.  
1
European representative : LG Electronics Service  
Europe B.V. Veluwezoom 15, 1327 AE Almere, The  
Netherlands (Tel : +31-(0)36-547-8888)  
CAUTION: The apparatus shall not be exposed to  
water (dripping or splashing) and no objects filled  
with liquids, such as vases, shall be placed on the  
apparatus.  
Disposal of your old appliance  
1. When this crossed-out wheeled bin  
symbol is attached to a product it  
means the product is covered by the  
European Directive 2002/96/EC.  
2. All electrical and electronic products  
shall be disposed of separately  
from the municipal waste stream  
via designated collection facilities  
appointed by the government or the  
local authorities.  
3. The correct disposal of your old  
appliance will help prevent potential  
negative consequences for the  
environment and human health.  
4. For more detailed information about  
disposal of your old appliance, please  
contact your city office, waste disposal  
service or the shop where you  
purchased the product.  
Getting Started  
5
Notes on Copyrights  
Important Notice for TV colour  
system  
The colour system of this player differs according to  
currently playing discs.  
Because AACS (Advanced Access Content  
System) is approved as content protection  
system for Blu-ray Disc format, similar to use of  
CSS (Content Scramble System) for DVD format,  
certain restrictions are imposed on playback,  
analogue signal output, etc., of AACS protected  
contents. The operation of this product and  
restrictions on this product may vary depending  
on your time of purchase as those restrictions  
may be adopted and/or changed by AACS after  
the production of this product.  
y
1
For example, when the player plays the disc  
recorded in the NTSC colour system, the image is  
output as an NTSC signal.  
Only the multi system colour TV can receive all  
signals output from the player.  
If you have a PAL colour system TV, you will see  
just distorted images when using discs or video  
contents recorded in NTSC.  
y
Furthermore, BD-ROM Mark and BD+ are  
y
additionally used as content protection systems  
for Blu-ray Disc format, which imposes certain  
restrictions including playback restrictions for  
BD-ROM Mark and/or BD+ protected contents.  
To obtain additional information on AACS, BD-  
ROM Mark, BD+, or this product, please contact  
an authorized Customer Service centre.  
The multi system colour TV changes the colour  
system automatically according to input signals.  
In case that the colour system is not changed  
automatically, turn it off and then on to see  
normal images on screen.  
y
Even if the disc recorded in NTSC colour system  
are well displayed on your TV, these may not be  
recorded correctly on your recorder.  
y
Many BD-ROM/DVD discs are encoded with  
copy protection. Because of this, you should only  
connect your player directly to your TV, not to a  
VCR. Connecting to a VCR results in a distorted  
picture from copy-protected discs.  
y
y
Regional Code  
This unit has a regional code printed on the rear of  
the unit. This unit can play only BD-ROM or DVD  
discs labelled same as the rear of the unit or“ALL”.  
This product incorporates copyright protection  
technology that is protected by U.S. patents  
and other intellectual property rights. Use of  
this copyright protection technology must be  
authorized by Rovi, and is intended for home and  
other limited viewing uses only unless otherwise  
authorized by Rovi. Reverse engineering or  
disassembly is prohibited.  
System Select (Optional)  
Remove any disc that might be in the unit, open  
the disc tray using the B(OPEN/CLOSE) button  
and then,Press and hold PAUSE (M) for more than  
five seconds to be able to select a system (PAL /  
NTSC /AUTO).  
Under the U.S. Copyright laws and Copyright  
laws of other countries, unauthorized recording,  
use, display, distribution, or revision of television  
programs, videotapes, BD-ROM discs, DVDs, CDs  
and other materials may subject you to civil and/  
or criminal liability.  
y
6
Table of Contents  
3
System Setting  
Table of Contents  
23 Settings  
23 – Adjust the Setup Settings  
23 – [DISPLAY] Menu  
25 – [LANGUAGE] Menu  
25 – [AUDIO] Menu  
27 – [LOCK] Menu  
1
Getting Started  
3
5
5
8
8
Safety Information  
– Regional Code  
– System Select (Optional)  
Introduction  
– Playable Discs and symbols used in  
this manual  
27 – [NETWORK] Menu  
28 – [OTHERS] Menu  
4
Operating  
9
– About the “7” Symbol Display  
29 General Playback  
29 – Using [HOME] menu  
29 – Playing a Disc  
10 – File compatibility  
11  
– AVCHD (Advanced Video Codec High  
Definition)  
29 – Playing a file on a disc/USB device  
30 – Playing Blu-ray 3D disc  
30 – Enjoying BD-LiveTM  
31 – Playing a file on a network server  
32 – Basic operations for video and audio  
content  
32 – Basic operations for photo content  
32 – Using the disc menu  
32 – Resume playback  
12 – About DLNA  
12 – Certain System Requirements  
12 – LG Remote  
12 – Compatibility Notes  
13  
14  
14  
Remote control  
Front panel  
Rear panel  
33 Advanced Playback  
33 – Repeat Playback  
2
Connecting  
15  
Connecting to Your TV  
33 – Repeating a specific portion  
33 – Enlarge the playback image  
34 – Marker Search  
34 – Using the search menu  
35 – Changing content list view  
35 – Viewing content information  
35 – Selecting a subtitle file  
36 – Last Scene Memory  
36 – Options while viewing a photo  
36 – Listening to music while slide show  
37 On-Screen display  
37 – Displaying content information on-  
screen  
37 – Playing from selected time  
38 – Hearing a different audio  
38 – Selecting a subtitle language  
38 – Watching from a different angle  
38 – Changing the TV Aspect Ratio  
39 – Changing the Picture Mode  
39 – Changing subtitle code page  
15 – HDMI Connection  
16 – What is SIMPLINK?  
16 – Video/Audio (Left/Right) Connection  
16 – Resolution Setting  
17  
17  
18 – Connecting to an Amplifier via HDMI  
Output  
18 – Connecting to an Amplifier via Digital  
Audio Output  
19 – Connecting to an Amplifier via 2  
Channel Audio Output  
19  
Connecting to an Amplifier  
– About Digital Multi-channel sound  
Connecting to your Home Network  
19 – Wired network connection  
20 – Wired Network Setup  
22 USB device connection  
22 – Playback content in the USB device  
Table of Contents  
7
40 Enjoying the NetCast™ Entertainment  
Access  
1
5
Troubleshooting  
41  
41  
Troubleshooting  
– General  
42 – Network  
42 – Picture  
43 – Sound  
43 – Customer Support  
43 – Open source software notice  
2
3
4
5
6
6
Appendix  
44 Controlling a TV with the Supplied  
Remote Control  
44 – Setting up the remote to control your  
TV  
45 Network Software Update  
45 – Network update notification  
45 – Software Update  
46 About Nero MediaHome 4 Essentials  
46 – Installing Nero MediaHome 4  
Essentials  
47 – Sharing files and folders  
48 Area Code List  
49 Language Code List  
50 Trademarks and Licenses  
51  
Audio Output Specifications  
53 Specifications  
54 Maintenance  
54 – Handling the Unit  
54 – Notes on Discs  
55 Important Information Relating to  
Network Services  
8
Getting Started  
Introduction  
1
Playable Discs and symbols used in this manual  
Media/Term  
Logo  
Symbol  
Description  
Discs such as movies that can be purchased or  
rented.  
y
e
“Blu-ray 3D”discs and“Blu-ray 3D ONLY”discs  
BD-R/RE discs that are recorded in BDAV format.  
y
y
Blu-ray  
BD-R/RE discs that contain Movie, Music or  
Photo files.  
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
y
Discs such as movies that can be purchased or  
rented.  
y
r
Video mode and finalized only  
Supports the dual layer disc also  
y
y
DVD-ROM  
DVD-R  
DVD-RW  
DVD+R  
Finalized AVCHD format  
o
DVD+RW  
(8 cm / 12  
cm disc)  
DVD R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
DVD-RW  
(VR)  
(8 cm / 12  
cm disc)  
VR mode and finalized only  
Audio CD  
r
Audio CD  
(8 cm / 12  
cm disc)  
t
CD-R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
CD-R/RW  
(8 cm / 12  
cm disc)  
ISO 9660+JOLIET, UDF and UDF Bridge format  
Indicates special notes and operating features.  
Note  
–
–
,
>
Indicates cautions for preventing possible  
damages from abuse.  
Caution  
Getting Started  
9
Note  
,
About the “ ” Symbol Display  
7
Depending on the conditions of the  
recording equipment or the CD-R/RW (or  
DVD R/RW) disc itself, some CD-R/RW (or  
DVD R/RW) discs cannot be played on the  
unit.  
y
“7”may appear on your TV display during  
operation and indicates that the function explained  
in this owner’s manual is not available on that  
specific media.  
1
Depending on the recording software & the  
finalization, some recorded discs (CD-R/RW,  
DVD R/RW, BD-R/RE) may not be playable.  
y
y
BD-R/RE, DVD R/RW and CD-R/RW discs  
recorded using a personal computer or a  
DVD or CD Recorder may not play if the  
disc is damaged or dirty, or if there is dirt or  
condensation on the player’s lens.  
If you record a disc using a personal  
computer, even if it is recorded in a  
compatible format, there are cases in which  
it may not play because of the settings of  
the application software used to create the  
disc. (Check with the software publisher for  
more detailed information.)  
y
This player requires discs and recordings to  
meet certain technical standards in order to  
achieve optimal playback quality.  
y
y
Pre-recorded DVDs are automatically set to  
these standards. There are many different  
types of recordable disc formats (including  
CD-R containing MP3 or WMA files) and  
these require certain pre-existing conditions  
to ensure compatible playback.  
Customers should note that permission  
is required in order to download MP3 /  
WMA files and music from the Internet.  
Our company has no right to grant such  
permission. Permission should always be  
sought from the copyright owner.  
y
y
You have to set the disc format option  
to [Mastered] in order to make the discs  
compatible with the LG players when  
formatting rewritable discs. When setting  
the option to Live System, you cannot use  
it on LG player. (Mastered/Live File System :  
Disc format system for windows Vista)  
10 Getting Started  
File compatibility  
Movie files  
1
File  
Location  
File  
Extension  
Codec Format  
Audio Format  
Subtitle  
“.divx”, “.avi”,  
“.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx  
“.mkv”, “.mp4”,  
“.asf”, “.wmv”,  
“.m4v”(DRM  
free)  
DIVX3.xx, DIVX4.xx,  
Dolby Digital,  
DTS, MP3,  
WMA, AAC,  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), VobSub  
(.sub), SubViewer 1.0 (.sub),  
SubViewer 2.0 (.sub/.txt), TMPlayer  
(.txt), DVD Subtitle System (.txt)  
Disc,  
USB  
(standard playback  
only), XVID, MPEG1 SS, AC3  
H.264/MPEG-4 AVC,  
MPEG2 PS, MPEG2 TS  
“.avi”, “.divx”,  
“.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx  
“.mkv”, “.mp4” (standard playback  
DIVX3.xx, DIVX4.xx,  
Dolby Digital,  
DTS, MP3,  
WMA, AAC,  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), SubViewer  
1.0 (.sub), SubViewer 2.0 (.sub/  
.txt), TMPlayer (.txt), DVD Subtitle  
System (.txt)  
DLNA,  
PC  
only), XVID, MPEG1 SS, AC3  
H.264/MPEG-4 AVC,  
MPEG2 PS, MPEG2 TS  
Music files  
File  
Location  
File  
Extension  
Sampling Frequency  
Bitrate  
Note  
Disc,  
USB,  
DLNA,  
PC  
“.divx”, “.mp3”,  
“.wma”, “.wav”,  
“.m4a”(DRM  
free)  
within 32 - 48 kHz  
(WMA),  
within 16 - 48 kHz (MP3) within 32 - 320  
kbps (MP3)  
within 32 - 192  
kbps (WMA),  
Some WAV files are  
not supported on this  
player.  
Photo files  
File  
Location  
File  
Extension  
Recommended  
Size  
Note  
Disc,  
USB,  
DLNA,  
PC  
“.jpg”, “.jpeg”,  
“.png”  
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless  
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files  
are not supported.  
Getting Started 11  
Note  
Note  
,
,
The file name is limited to 180 characters.  
y
y
This player supports UTF-8 files even it  
contains Unicode subtitle contents. This  
player can not support the pure Unicode  
subtitle files.  
y
A“avi”file which is encoded“WMV 9 codec”  
is not supported.  
1
Depending on the size and number of the  
files, it may take several minutes to read the  
contents on the media.  
y
Depending on the types of file or ways of  
recording, it may not play back.  
y
y
A disc which was recorded by multi-session  
on normal PC is not supported on this  
player.  
File compatibility may differ depending on  
the server.  
y
y
Because the compatibility on DLNA server  
are tested on the bundle DLNA server (Nero  
MediaHome 4 Essentials) environment, file  
requirements and playback functions may  
differ depending on media servers.  
To be playback a movie file, movie file name  
and Subtitle file name must be the same.  
y
y
y
If video codec is MPEG2 TS or MPEG2 PS,  
subtitle does not play back.  
The file requirements on 10 are not  
always compatible. There may have some  
restrictions by file features and media  
server’s ability.  
y
y
The total playback time of music file  
indicated on the screen may not correct for  
VBR files.  
Playing a movie subtitle files are only  
available on share folder of a PC or DLNA  
media server created by supplied Nero  
MediaHome 4 Essentials software on this  
player package.  
AVCHD (Advanced Video  
Codec High Definition)  
This player can playback AVCHD format discs.  
These discs are normally recorded and used in  
camcorders.  
y
The files from removable media such as USB  
drive, DVD-drive etc. on your media server  
may not be shared properly.  
y
The AVCHD format is a high definition digital  
video camera format.  
y
y
This unit cannot support the ID3 Tag  
embedded MP3 file.  
y
y
The MPEG-4 AVC/H.264 format is capable of  
compressing images at higher efficiency than  
that of the conventional image compressing  
format.  
The total playback time of music file  
indicated on the screen may not correct for  
VBR files.  
This player can playback AVCHD discs using  
“x.v.Colour”format.  
y
y
HD video files contained on the CD or USB  
1.0/1.1 may not played properly. Blu-ray  
Disc, DVD or USB 2.0 are recommended to  
play back HD video files.  
y
y
y
Some AVCHD format discs may not play  
depending on the recording condition.  
This player supports H.264/MPEG-4 AVC  
profile Main, High at Level 4.1. For a file  
with higher level, the warning message will  
appear on the screen.  
AVCHD format discs need to be finalized.  
y
y
“x.v.Colour”offers a wider Colour range than  
normal DVD camcorder discs.  
This player does not support files that are  
2
recorded with GMC 1 or Qpel  
.
*
*
*1 GMC – Global Motion Compensation  
*2 Qpel – Quarter pixel  
12 Getting Started  
About DLNA  
LG Remote  
This Player is a DLNA Certified digital media player  
that can display and play movie, photo and music  
content from your DLNA-compatible digital media  
server (PC and Consumer Electronics).  
You can control this player with your iPhone  
or Android phone via your home network. This  
player and your phone must be connected to your  
wireless network device such as access point.  
Visit“Apple iTunes”or“Google Apps Marketplace”for  
detailed information of“LG Remote”.  
1
The Digital Living Network Alliance (DLNA) is a  
cross-industry organization of consumer electronics,  
computing industry and mobile device companies.  
Digital Living provides consumers with easy sharing  
of digital media through your home network.  
Note  
,
“LG Remote”function could be supported  
through updating the Network Software in the  
first half of 2011. We recommend update of  
the player using the latest software to add this  
feature. (See page 45)  
The DLNA certification logo makes it easy  
to find products that comply with the DLNA  
Interoperability Guidelines. This unit complies with  
DLNA Interoperability Guidelines v1.5.  
When a PC running DLNA server software or  
other DLNA compatible device is connected to  
this player, some setting changes of software or  
other devices may be required. Please refer to the  
operating instructions for the software or device for  
more information.  
Compatibility Notes  
Because BD-ROM is a new format, certain disc,  
digital connection and other compatibility issues  
are possible. If you experience compatibility  
problems, please contact an authorized  
Customer Service centre.  
y
Certain System Requirements  
This unit allows you to enjoy functions such  
as picture-in-picture, secondary audio and  
Virtual packages, etc., with BD-ROM supporting  
BONUSVIEW (BD-ROM version 2 Profile 1 version  
1.1/ Final Standard Profile). Secondary video and  
audio can be played from a disc compatible with  
the picture-in-picture function. For the playback  
method, refer to the instructions in the disc.  
y
For high definition video playback:  
High definition display that has HDMI input jacks.  
BD-ROM disc with high definition content.  
y
y
y
HDMI or HDCP capable DVI input on your display  
device is required for some content (as specified  
by disc authors).  
Viewing high-definition content and up-  
converting standard DVD content may require a  
HDMI-capable input or HDCP-capable DVI input  
on your display device.  
y
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD  
multi-channel audio playback:  
An amplifier/receiver with a built-in (Dolby  
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or  
DTS-HD) decoder.  
y
Some BD-ROM and DVD discs may restrict the  
use of some operation commands or features.  
y
y
Main, centre, surround speakers and subwoofer  
as necessary for chosen format.  
y
Dolby TrueHD, Dolby Digital Plus and DTS-HD are  
supported with maximum 7.1 channels if you  
use HDMI connection for the audio output of the  
unit.  
For playing files on your PC’s share folder via your  
home network, the PC requires below.  
Windows® XP (Service Pack 2 or higher),  
Windows Vista® (no Service Pack required)  
Windows 7® (no Service Pack required)  
y
You can use a USB device to store some discs  
related information, including downloaded on-  
line content. The disc you are using will control  
how long this information is retained.  
y
1.2 GHz Intel® Pentium® III or AMD  
Sempron™ 2200+ processors  
y
Network environment: 100 Mb Ethernet, WLAN  
y
y
More than 1 folder on your PC has to be shared.  
Visit support link of your operating system for  
more information on file share settings.  
Getting Started 13  
Remote control  
• • • • • • a • • • • • •  
TITLE/POP-UP: Displays the DVD  
title menu or BD-ROM’s pop-up  
menu, if available.  
1(POWER): Switches the player  
ON or OFF.  
1
DISC MENU: Accesses menu on a  
disc.  
B(OPEN/CLOSE): Opens and  
closes the disc tray.  
0-9 numerical buttons: Selects  
numbered options in a menu or  
inputs letters in the keypad menu.  
• • • • • • d • • • • •  
Colored (R, G, Y, B) buttons:  
Use to navigate BD-ROM menus.  
They are also used for [MOVIE],  
[PHOTO], [MUSIC] or [NetCast].  
CLEAR: Removes a mark on the  
search menu or a number when  
setting the password.  
MARKER: Marks any point during  
REPEAT (h): Repeats a desired playback.  
section or sequence.  
* : The button is not available for  
any function.  
• • • • • • b • • • • •  
ZOOM: Displays or exits the  
[Zoom] menu.  
c/v(SCAN): Searches  
backward or forward.  
TV Control Buttons: See page 44.  
C/V(SKIP): Goes to the  
next or previous chapter / track /  
file.  
Z(STOP): Stops playback.  
d(PLAY): Starts playback.  
M(PAUSE): Pauses playback.  
• • • • • • c • • • • •  
HOME (n): Displays or exits the  
[Home Menu].  
SEARCH: Displays or exits the  
search menu.  
INFO/DISPLAY (m): Displays or  
exits On-Screen Display.  
Battery Installation  
Direction buttons: Selects an  
option in the menu.  
ENTER (b): Acknowledges menu  
selection.  
BACK (x): Exits the menu or  
resumes playback. The resume  
play function may not work  
depending on the BD-ROM disc.  
Remove the battery cover on the  
rear of the Remote Control, and  
insert two R03 (size AAA) batteries  
with 4and 5matched correctly.  
14 Getting Started  
Front panel  
1
a Disc Tray  
e N(PLAY / PAUSE)  
f Z(STOP)  
b Display Window  
c Remote Sensor  
d B(OPEN/CLOSE)  
g 1(POWER) Button  
h USB Port  
Rear panel  
a AC power cord  
b VIDEO OUT  
e DIGITAL AUDIO OUT (OPTICAL)  
f LAN port  
c 2CH AUDIO OUT (Left/Right)  
d HDMI OUT  
Connecting 15  
HDMI Connection  
Connecting to Your TV  
Make one of the following connections, depending  
on the capabilities of your existing equipment.  
If you have a HDMI TV or monitor, you can connect  
it to this player using a HDMI cable (Type A, High  
Speed HDMITM Cable). Connect the HDMI jack on  
the player to the HDMI jack on a HDMI compatible  
TV or monitor.  
HDMI connection (page 15)  
Video connection (page 16)  
y
y
Note  
,
Depending on your TV and other  
equipment you wish to connect, there are  
various ways you could connect the player.  
Use only one of the connections described  
in this manual.  
y
Rear of the unit  
2
Please refer to the manuals of your TV,  
Stereo System or other devices as necessary  
to make the best connections.  
y
y
y
Do not connect the player’s AUDIO OUT  
jack to the phono in jack (record player) of  
your audio system.  
HDMI  
cable  
Do not connect your player via your VCR.  
The image could be distorted by the copy  
protection system.  
TV  
Set the TV’s source to HDMI (refer to TV’s Owner’s  
manual).  
Additional Information for HDMI  
When you connect a HDMI or DVI compatible  
device make sure of the following:  
y
-
Try switching off the HDMI/DVI device and  
this player. Next, switch on the HDMI/DVI  
device and leave it for around 30 seconds,  
then switch on this player.  
-
-
The connected device’s video input is set  
correctly for this unit.  
The connected device is compatible with  
720x576p, 1280x720p, 1920x1080i or  
1920x1080p video input.  
Not all HDCP-compatible HDMI or DVI devices  
will work with this player.  
y
-
The picture will not be displayed properly  
with non-HDCP device.  
-
This player does not playback and TV screen  
is changed to black screen.  
16 Connecting  
Note  
,
Video/Audio (Left/Right)  
Connection  
Connect the VIDEO OUT jack on the player to the  
video in jack on the TV using a video cable. Connect  
the left and right AUDIO OUT jacks of the player to  
the audio left and right IN jacks on the TV using the  
audio cables.  
If a connected HDMI device does not accept  
y
the audio output of the player, the HDMI  
device’s audio sound may be distorted or  
may not output.  
When you use HDMI connection, you can  
change the resolution for the HDMI output.  
(Refer to“Resolution Setting”on page 16.)  
y
y
y
Select the type of video output from the  
HDMI OUT jack using [HDMI Color Setting]  
option on the [Setup] menu (see page 24).  
2
Rear of the unit  
Changing the resolution when the  
connection has already been established  
may result in malfunctions. To solve the  
problem, turn off the player and then turn it  
on again.  
When the HDMI connection with HDCP  
is not verified, TV screen is changed to  
black screen. In this case, check the HDMI  
connection, or disconnect the HDMI cable.  
y
y
If there are noises or lines on the screen,  
please check the HDMI cable (length is  
generally limited to 4.5 m(15 ft.)).  
Audio  
/ Video cable  
TV  
What is SIMPLINK?  
Some functions of this unit are controlled by the  
TV’s remote control when this unit and LG TV’s with  
SIMPLINK are connected through HDMI connection.  
Resolution Setting  
The player provides several output resolutions for  
HDMI OUT. You can change the resolution using  
[Setup] menu.  
Controllable functions by LG TV’s remote control;  
Play, Pause, Scan, Skip, Stop, Power Off, etc.  
Refer to the TV owner’s manual for the details of  
SIMPLINK function.  
1. Press HOME (n).  
LG TV’s with SIMPLINK function has the logo as  
shown above.  
2. Use A/Dto select the [Setup] and press  
ENTER (b). The [Setup] menu appears.  
Note  
3. Use W/Sto select [DISPLAY] option then  
,
Depending on the disc type or playing status,  
some SIMPLINK operation may differ from your  
purpose or not work.  
press to move to the second level.  
D
Connecting 17  
4. Use W/Sto select the [Resolution] option  
Connecting to an  
Amplifier  
then press ENTER (b) to move to the third level.  
Make one of the following connections, depending  
on the capabilities of your existing equipment.  
HDMI Audio connection (page 18)  
Digital Audio connection (page 18)  
2CH Analogue Audio connection (page 19)  
y
y
y
5. Use W/Sto select the desired resolution then  
2
press ENTER (b) to confirm your selection.  
Since many factors affect the type of audio output,  
see“Audio Output Specifications”for details (page  
51).  
Note  
,
If your TV does not accept the resolution  
you have set on the player, you can set  
resolution to 576p as follows:  
y
About Digital Multi-channel  
sound  
1. Press Bto open the disc tray.  
2. Press Z(STOP) for more than 5 seconds.  
A digital multi-channel connection provides the  
best sound quality. For this, you need a multi-  
channel Audio/Video Receiver that supports one  
or more of the audio formats supported by your  
player. Check the logos on the front of the Audio/  
Video receiver and the manual. (PCM Stereo, PCM  
Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby  
TrueHD, DTS and/or DTS-HD)  
When you set the resolution to 576i with  
HDMI connection, actual resolution is  
outputted to 576p.  
y
y
If you select a resolution manually and then  
connect the HDMI jack to TV and your TV  
does not accept it, the resolution setting is  
set to [Auto].  
If you select a resolution that your TV  
does not accept, the warning message  
will appear. After resolution change,  
if you cannot see the screen, please  
wait 20 seconds and the resolution will  
automatically revert back to the previous  
resolution.  
y
The 1080p video output frame rate may  
be automatically set to either 24 Hz or  
50 Hz depending both on the capability  
and preference of the connected TV and  
based on the native video frame rate of the  
content on the BD-ROM disc.  
y
y
The resolution of the VIDEO OUT jack is  
always outputted at 576i resolution.  
18 Connecting  
Connecting to an Amplifier via  
HDMI Output  
Connect the player’s HDMI OUT jack to the  
corresponding in jack on your amplifier using a  
HDMI cable.  
Connecting to an Amplifier via  
Digital Audio Output  
Connect the player’s DIGITAL AUDIO OUT jack  
to the corresponding in jack (OPTICAL) on your  
amplifier using an optional digital audio cable.  
Rear of the unit  
Rear of the unit  
2
Optical  
cable  
HDMI cable  
Receiver/Amplifier  
HDMI  
cable  
TV  
Receiver/Amplifier  
You will need to activate the player’s digital output.  
(See“[AUDIO] Menu”on page 25.)  
Connect the amplifier’s HDMI output jack to HDMI  
input jack on your TV using a HDMI cable if your  
amplifier has HDMI output jack.  
You will need to activate the player’s digital output.  
(See“[AUDIO] Menu”on page 25.)  
Connecting 19  
Connecting to an Amplifier via  
2 Channel Audio Output  
Connect the Left and Right 2CH AUDIO OUT jacks  
on the player to the audio left and right in jacks  
on your amplifier, receiver, or stereo system using  
audio cables.  
Connecting to your  
Home Network  
This player can be connected to a local area  
network (LAN) via the LAN port on the rear panel.  
By connecting the unit to a broadband home  
network, you have access to services such as  
software updates, BD-Live interactivity and  
streaming services.  
2
Rear of the unit  
Wired network connection  
Using a wired network provides the best  
performance, because the attached devices  
connect directly to the network and are not subject  
to radio frequency interference.  
Please refer to the documentation for your network  
device for further instructions.  
Connect the player’s LAN port to the corresponding  
port on your Modem or Router using a  
commercially available LAN or Ethernet cable.  
Audio cable  
Receiver/Amplifier  
20 Connecting  
Note  
,
Wired Network Setup  
When plugging or unplugging the LAN  
y
If there is a DHCP server on the local area network  
(LAN) via wired connection, this player will  
automatically be allocated an IP address. After  
making the physical connection, a small number of  
home networks may require the player’s network  
setting to be adjusted. Adjust the [NETWORK]  
setting as follow.  
cable, hold the plug portion of the cable.  
When unplugging, do not pull on the LAN  
cable but unplug while pressing down on  
the lock.  
Do not connect a modular phone cable to  
the LAN port.  
y
y
Since there are various connection  
configurations, please follow the  
specifications of your telecommunication  
carrier or internet service provider.  
Preparation  
Before setting the wired network, you need to  
connect the broadband internet to your home  
network.  
2
If you want to access content from PCs  
or DLNA servers, this player must be  
connected to the same local area network  
with them via a router.  
y
1. Select [Connection Setting] option in the  
[Setup] menu then press ENTER (b).  
Broadband  
service  
2. Select [Yes] and press ENTER (b) to continue.  
The new connection settings reset the current  
network settings.  
3. Use W/S/A/Dto select the IP mode  
Router  
between [Dynamic] and [Static].  
Normally, select [Dynamic] to allocate an IP  
address automatically.  
PC and/or  
DLNA certified  
server  
Note  
,
If there is no DHCP server on the network and  
you want to set the IP address manually, select  
[Static] then set [IP Address], [Subnet Mask],  
[Gateway] and [DNS Server] using  
W/S/A/Dand numerical buttons. If you  
make a mistake while entering a number, press  
CLEAR to clear the highlighted part.  
Rear of the unit  
4. Select [OK] and press ENTER (b) to apply  
network settings.  
Connecting 21  
5. The player will ask you to test the network  
connection. Select [OK] and press ENTER (b) to  
complete the network connection.  
Some internet connection operations may not  
be possible due to certain restrictions set by the  
Internet service provider (ISP) supplying your  
broadband Internet connection.  
y
6. If you select [Test] and press ENTER (b) at  
step 5 above, the network connection status is  
displayed on the screen.  
Any fees charged by an ISP including, without  
limitation, connection charges are your  
responsibility.  
y
y
You can also test it on the [Connection Status]  
in the [Setup] menu.  
A 10 Base-T or 100 Base-TX LAN port is required  
for wired connection to this player. If your  
internet service does not allow for such a  
connection, you will not be able to connect the  
player.  
2
You must use a Router to use xDSL service.  
y
y
A DSL modem is required to use DSL service and  
a cable modem is required to use cable modem  
service. Depending on the access method of and  
subscriber agreement with your ISP, you may not  
be able to use the internet connection feature  
contained in this player or you may be limited  
to the number of devices you can connect at  
the same time. (If your ISP limits subscription to  
one device, this player may not be allowed to  
connect when a PC is already connected.)  
Notes on Network Connection:  
Many network connection problems during  
set up can often be fixed by re-setting the  
router or modem. After connecting the player  
to the home network, quickly power off and/  
or disconnect the power cable of the home  
network router or cable modem. Then power on  
and/or connect the power cable again.  
y
The use of a“Router”may not be allowed or its  
usage may be limited depending on the policies  
and restrictions of your ISP. For details, contact  
your ISP directly.  
y
Depending on the internet service provider (ISP),  
the number of devices that can receive internet  
service may be limited by the applicable terms  
of service. For details, contact your ISP.  
y
y
Our company is not responsible for any  
malfunction of the player and/or the internet  
connection feature due to communication  
errors/malfunctions associated with your  
broadband internet connection, or other  
connected equipment.  
The features of BD-ROM discs made available  
through the Internet Connection feature are not  
created or provided by our company, and our  
company is not responsible for their functionality  
or continued availability. Some disc related  
material available by the Internet Connection  
may not be compatible with this player. If you  
have questions about such content, please  
contact the producer of the disc.  
y
Some internet contents may require a higher  
bandwidth connection.  
y
y
Even if the player is properly connected and  
configured, some internet contents may not  
operate properly because of internet congestion,  
the quality or bandwidth of your internet service,  
or problems at the provider of the content.  
22 Connecting  
Note  
,
USB device connection  
This player can play movie, music and photo files  
contained in the USB device.  
This player supports USB flash drive/external  
HDD formatted in FAT16, FAT32 and NTFS  
when accessing files (music, photo, movie).  
However, for BD-Live only FAT16 and FAT32  
formats are supported. Use the USB flash  
drive/external HDD formatted in either  
FAT16 or FAT32 when using BD-Live.  
y
y
Playback content in the USB  
device  
1. Insert a USB device to the USB port until it fits  
into place.  
The USB device can be used for the local  
storage for enjoying BD-Live discs with  
Internet.  
2
This unit can support up to 4 partitions of  
the USB device.  
y
y
y
Do not extract the USB device during  
operation (play, etc.).  
A USB device which requires additional  
program installation when you have  
connected it to a computer, is not  
supported.  
USB device: USB device that supports  
USB1.1 and USB2.0.  
y
y
When you connect the USB device on the HOME  
menu, the player plays a music file contained in the  
USB storage device automatically. If the USB storage  
device is containing various types of files, a menu  
for the file type selection will appear.  
Movie, music and photo files can be played.  
For details of operations on each file, refer to  
relevant pages.  
Regular back up is recommended to  
prevent data loss.  
y
y
File loading may takes few minutes depending on  
the number of content stored in the USB storage  
device. Press ENTER (b) while [Cancel] is selected  
to stop loading.  
If you use a USB extension cable, USB HUB  
or USB Multi-reader, the USB device may not  
be recognized.  
2. Press HOME (n).  
Some USB device may not work with this  
unit.  
y
y
y
3. Select [Movie], [Photo] or [Music] using A/D,  
and press ENTER (b).  
Digital camera and mobile phone are not  
supported.  
4. Select the [USB] option using W/S, and press  
ENTER (b).  
USB Port of the unit cannot be connected  
to PC. The unit cannot be used as a storage  
device.  
5. Select a file using W/S/A/D, and press  
PLAY or ENTER (b) to play the file.  
6. Withdraw the USB device carefully.  
System Setting 23  
[DISPLAY] Menu  
Settings  
TV Aspect Ratio  
Select a TV aspect ratio option according to your TV  
type.  
Adjust the Setup Settings  
You can change the settings of the player in the  
[Setup] menu.  
[4:3 Letter Box]  
1. Press HOME (n).  
Select when a standard 4:3 TV is connected.  
Displays theatrical images with masking bars  
above and below the picture.  
[4:3 Pan Scan]  
Select when a standard 4:3 TV is connected.  
Displays pictures cropped to fill your TV screen.  
Both sides of the picture are cut off.  
2. Use A/Dto select the [Setup] and press  
3
ENTER (b). The [Setup] menu appears.  
[16:9 Original]  
Select when a 16:9 wide TV is connected. The  
4:3 picture is displayed with an original 4:3  
aspect ratio, with black bars appearing at the  
left and right sides.  
[16:9 Full]  
Select when a 16:9 wide TV is connected. The  
4:3 picture is adjusted horizontally (in a linear  
proportion) to fill the entire screen.  
3. Use W/Sto select the first setup option, and  
press Dto move to the second level.  
Note  
,
You cannot select [4:3 Letter Box] and  
[4:3 Pan Scan] option when the resolution is  
set to higher than 720p.  
4. Use W/Sto select a second setup option, and  
press ENTER (b) to move to the third level.  
5. Use W/Sto select a desired setting, and press  
ENTER (b) to confirm your selection.  
24 System Setting  
Resolution  
HDMI Color Setting  
Sets the output resolution HDMI video signal. Refer  
to page 16 for details about the resolution setting.  
Select the type of output from the HDMI OUT jack.  
For this setting, please refer to the manuals of your  
display device.  
[Auto]  
[YCbCr]  
If the HDMI OUT jack is connected to  
TVs providing display information (EDID),  
automatically selects the resolution best suited  
to the connected TV.  
Select when connecting to a HDMI display  
device.  
[RGB]  
[1080p]  
Select when connecting to a DVI display  
device.  
Outputs 1080 lines of progressive video.  
[1080i]  
3D Mode  
Outputs 1080 lines of interlaced video.  
Select the type of output mode for Blu-ray 3D disc  
playback.  
3
[720p]  
Outputs 720 lines of progressive video.  
[Off]  
[576p]  
Blu-ray 3D disc playback will output as 2D  
mode like a normal BD-ROM disc playback.  
Outputs 576 lines of progressive video.  
[576i]  
[On]  
Outputs 576 lines of interlaced video.  
Blu-ray 3D disc playback will output as 3D  
mode.  
1080p Display Mode  
Wallpaper  
Changes the background of the initial screen.  
When the resolution is set to 1080p, select  
[24 Hz] for smooth presentation of film material  
(1080p/24 Hz) with a HDMI-equipped display  
compatible with 1080p/24 Hz input.  
Note  
,
When you select [24 Hz], you may  
experience some picture disturbance when  
the video switches video and film material.  
In this case, select [50 Hz].  
y
y
Even when [1080p Display Mode] is set to  
[24 Hz], if your TV is not compatible with  
1080p/24 Hz, the actual frame frequency of  
the video output will be 50 Hz to match the  
video source format.  
System Setting 25  
[LANGUAGE] Menu  
[AUDIO] Menu  
Each disc has a variety of audio output options. Set  
the player’s Audio options according to the type of  
audio system you use.  
Display Menu  
Select a language for the [Setup] menu and on-  
screen display.  
Note  
,
Since many factors affect the type of audio  
output, see“Audio Output Specifications”on  
page 51 for details.  
Disc Menu/Disc Audio/  
Disc Subtitle  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
HDMI / Digital Output (SPDIF)  
[Original]  
[PCM Stereo]  
Refers to the original language in which the  
disc was recorded.  
Select if you connect this unit’s HDMI OUT or  
DIGITAL AUDIO OUT jack to a device with two-  
channel digital stereo decoder.  
3
[Other]  
Press ENTER (b) to select another language.  
Use number buttons then press ENTER (b)  
to enter the corresponding 4-digit number  
according to the language code list on page 49.  
[PCM Multi-Ch] (HDMI only)  
Select if you connect this unit’s HDMI OUT jack  
to a device with multi-channel digital decoder.  
[DTS Re-Encode]  
[Off] (Disc Subtitle only)  
Select if you connect this unit’s HDMI OUT or  
DIGITAL AUDIO OUT jack to a device with DTS  
decoder.  
Turn off Subtitle.  
Note  
,
Depending on the disc, your language setting  
may not work.  
[Primary Pass-Thru]  
Select if you connect this unit’s DIGITAL AUDIO  
OUT and HDMI OUT jack to a device with  
LPCM, Dolby Digital, Dolby Digital Plus, Dolby  
TrueHD, DTS and DTS-HD decoder.  
Note  
,
When [HDMI] option is set to [PCM Multi-  
Ch], the audio may output as PCM Stereo  
if the PCM Multi-Ch information is not  
detected from HDMI device with EDID.  
y
y
If the [HDMI] or [Digital Output (SPDIF)]  
option is set to [DTS Re-Encode], the DTS  
Re-Encode audio is outputted for BD-ROM  
discs with secondary audio and the original  
audio is outputted for the other discs (like  
[Primary Pass-Thru]).  
26 System Setting  
Sampling Freq.  
DTS Neo:6  
(Digital Audio Output)  
If the player is connected to the multi-channel  
Audio Receiver by HDMI connection, set this option  
to enjoy the multi-channel surround sound with  
the 2-channel audio source.  
[192 kHz]  
Select this if your A/V Receiver or Amplifier is  
capable of handling 192 kHz signals.  
[Off]  
[96 kHz]  
Outputs the stereo sound via front speakers.  
Select this if your A/V Receiver or Amplifier is  
not capable of handling 192 kHz signals. When  
this choice is made, this unit  
automatically converts any 192 kHz signals to  
96 kHz so your system can decode them.  
[Music]  
Outputs the multi-channel sounds that are  
optimized for listening to music.  
[Cinema]  
[48 kHz]  
Outputs the multi-channel sounds that are  
optimized for watching movie.  
Select this if your A/V Receiver or Amplifier is  
not capable of handling 192 kHz and 96 kHz  
signal. When this choice is made, this unit  
automatically converts any 192 kHz and 96 kHz  
signals to 48 kHz so your system can decode  
them.  
3
Note  
,
This function is not available on an on-line  
service.  
y
y
Only the audio source with less than 48  
kHz sampling frequency is available for this  
function.  
Check the documentation for your A/V Receiver or  
Amplifier to verify its capabilities.  
This function is available only when [HDMI]  
option is set to [PCM Multi-Ch].  
y
DRC (Dynamic Range Control)  
This function allows you to listen to a movie at a  
lower volume without losing clarity of sound.  
[Off]  
Turns off this function.  
[On]  
Compress the dynamic range of the Dolby  
Digital, Dolby Digital Plus or Dolby TrueHD  
audio output.  
[Auto]  
The dynamic range of the Dolby TrueHD audio  
output is specified by itself.  
And the dynamic range of the Dolby Digital  
and Dolby Digital Plus are operated as same as  
the [On] mode.  
Note  
,
The DRC setting can be changed only when a  
disc is not inserted or the unit is in complete  
stop mode.  
System Setting 27  
Blu-ray Disc Rating  
Set an age limit of BD-ROM play. Use number  
buttons to input an age limit for BD-ROM viewing.  
[LOCK] Menu  
The [LOCK] settings affect only Blu-ray Disc and  
DVD playback.  
To access the any features in [LOCK] settings, you  
must enter the 4-digit security code you have  
created.  
[255]  
All BD-ROM can be played.  
If you have not entered a password yet, you are  
prompted to do so. Enter a 4-digit password twice,  
and press ENTER (b) to create a new password.  
[0-254]  
Prohibits play of BD-ROM with corresponding  
ratings recorded on them.  
Password  
You can create or change the password.  
Note  
,
The [Blu-ray Disc Rating] will be applied  
only for the Blu-ray Disc that containing the  
Advanced Rating Control.  
[None]  
3
Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
Area Code  
[Change]  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list  
on page 48.  
Enter the current password and press ENTER (b).  
Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
If you forget your password  
[NETWORK] Menu  
If you forget your password, you can clear it using  
the following steps:  
The [NETWORK] settings are needed to use the  
software update, BD Live and NetCast features.  
1. Remove any disc that might be in the player.  
2. Select [Password] option in the [Setup] menu.  
Connection Setting  
3. Use Number buttons to enter“210499”. The  
password is cleared.  
If your home network environment is ready  
to connect the player, the player needs to be  
set the wired network connection for network  
communication. (See“Connecting to your Home  
Network”on page 19.)  
Note  
,
If you make a mistake before pressing  
ENTER (b), press CLEAR. Then input the  
correct password.  
Connection Status  
If you want to check the network status on this  
player, select the [Connection Status] options and  
press ENTER (b) to check whether a connection  
to the network and the internet have been  
established.  
DVD Rating  
Blocks playback of rated DVD based on their  
content. (Not all discs are rated.)  
[Rating 1-8]  
Rating one (1) has the most restrictions and  
rating eight (8) is the least restrictive.  
[Unlock]  
If you select [Unlock], parental control is not  
active and the disc plays in full.  
28 System Setting  
Note  
BD-LIVE connection  
You can restrict Internet access when BD-Live  
functions are used.  
,
All the downloaded videos from DivX VOD  
with this player’s registration code can only be  
played back on this unit.  
[Permitted]  
Internet access is permitted for all BD-Live  
contents.  
Auto Power Off  
The screen saver appears when you leave the player  
in Stop mode for about five minutes. If you set this  
option to [On], the unit automatically turns itself off  
after the Screen Saver is displayed for 20 minutes.  
Set this option to [Off] to leave the screen saver  
until the unit is operated by the user.  
[Partially permitted]  
Internet access is permitted only for BD-  
Live contents which have content owner  
certificates. Internet access and AACS Online  
functions are prohibited for all BD-Live contents  
without a certificate.  
Initialize  
[Prohibited]  
3
[Factory Set]  
Internet access is prohibited for all BD-Live  
contents.  
You can reset the player to its original factory  
settings.  
NetCast  
[Blu-ray Storage Clear]  
Initializes the BD-Live contents from the  
connected USB storage.  
[Country Setting]  
Select your area for displaying proper services  
and contents on the [NetCast] feature.  
Note  
,
If you reset the player to its original factory  
settings using [Factory Set] option, you have  
to set all the activation for the on-line services  
and network settings again.  
[OTHERS] Menu  
DivX® VOD  
ABOUT DIVX VIDEO: DivX® is a digital video format  
created by DivX, Inc. This is an official DivX Certified®  
device that plays DivX video. Visit divx.com for more  
information and software tools to convert your files  
into DivX video.  
Software  
[Information]  
Displays the current software version.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX  
Certified® device must be registered in order to play  
purchased DivX Video-on-Demand (VOD) movies.  
To obtain your registration code, locate the DivX  
VOD section in your device setup menu. Go to vod.  
divx.com for more information on how to complete  
your registration.  
[Update]  
You can update the software by connecting  
the unit directly to the software update server  
(see page 45).  
Disclaimer Notice  
Press ENTER (b) to view the notice of Network  
Service Disclaimer on page 55.  
[Register]  
Displays the registration code of your player.  
[Deregister]  
Deactivate your player and display the  
deactivation code.  
Operating 29  
Note  
,
General Playback  
Playback functions described in this manual  
are not always available in every file and  
media. Some functions can be restricted  
depending on many factors.  
y
y
Using [HOME] menu  
The home menu appears when you press  
HOME (n). Use A/Dto select a category and  
press ENTER (b).  
Depending on the BD-ROM titles, a USB  
device connection may be needed for the  
proper playback.  
Unfinalized DVD VR format discs may not be  
played in this player.  
y
y
Some DVD-VR discs are made with CPRM  
data by DVD RECORDER. This unit cannot  
support these kinds of discs.  
Playing a file on a disc/USB  
device  
yui  
This player can play video, audio and photo files  
contained in the disc or USB device.  
4
a
b
c
d
e
[Movie] - Plays video contents.  
1. Insert a data disc on the tray or connect a USB  
device. ( When you insert the USB device, the  
USB option menu will be appeared to select for  
[Movie], [Photo] or [Music]. )  
[Photo] - Plays photo contents.  
[Music] - Plays audio contents.  
[NetCast] - Access to the NetCast Home.  
[Setup] - Adjusts the system settings.  
2. Select [Movie], [Photo] or [Music] using A/D,  
and press ENTER (b).  
3. Select [Data] or [USB] option using W/S, and  
Playing a Disc  
press ENTER (b).  
ert  
4. Select a file using W/S/A/D, and press  
d(PLAY) or ENTER (b) to play the file.  
1. Press B(OPEN/CLOSE), and place a disc on the  
disc tray.  
2. Press B(OPEN/CLOSE) to close the disc tray.  
For the most Audio CD, BD-ROM and  
DVD-ROM discs, playback starts automatically.  
3. Press HOME (n).  
4. Select [Movie] or [Music] using A/D, and press  
ENTER (b).  
5. Select [Blu-ray Disc], [DVD], [VR] or [Audio]  
option using W/S, and press ENTER (b).  
Note  
,
When a disc is in the unit and the power is ON,  
playback is not started automatically.  
30 Operating  
Playing Blu-ray 3D disc  
Enjoying BD-LiveTM  
e
e
This player can play the Blu-ray 3D discs which  
contains separate views for the left and right eyes.  
BD-ROM supporting BD-Live (BD-ROM version 2  
Profile 2) that has a network extension function  
allows you to enjoy more functions such as  
downloading new movie trailers by connecting this  
unit to the internet.  
Preparation  
In order to playback Blu-ray 3D title in  
stereoscopic 3D mode, you need to:  
1. Check the network connection and settings  
(page 19).  
Check your TV is 3D capable and has HDMI  
1.4 input(s).  
y
y
y
y
2. Insert a USB storage device to the USB port on  
the front panel.  
Wear 3D glasses to enjoy the 3D experience  
if it is necessary.  
A USB storage device is needed to download  
bonus content.  
Check whether the BD-ROM title is the Blu-  
ray 3D disc or not.  
3. Press HOME (n), and set the [BD-LIVE  
connection] option on the [Setup] menu (page  
30).  
Connect an HDMI cable (Type A, High  
Speed HDMITM Cable) between the player’s  
HDMI output and TV’s HDMI input.  
Depending on a disc, the BD-Live function may  
not be operated if [BD-LIVE connection] option  
is set to [Partially Permitted].  
4
1. Press HOME (n), and set the [3D Mode] option  
4. Insert a BD-ROM with BD-Live.  
on the [Setup] menu to [On] ( page 24).  
The operations are differ depending on the disc.  
Refer to the manual supplied with the disc.  
2. Press B(OPEN/CLOSE), and place a disc on the  
disc tray.  
3. Press B(OPEN/CLOSE) to close the disc tray.  
Caution  
>
Do not extract the connected USB device  
while content is being downloaded or a Blu-  
ray disc is still in the disc tray. Doing so may  
damage the connected USB device and BD-  
Live features may not operate properly with  
the damaged USB device anymore. If the  
connected USB device seems damaged from  
such an action, you can format the connected  
USB device from the PC and reuse it with this  
player.  
The playback starts automatically.  
4. Refer to the owner’s manual of your 3D-ready  
TV for the further instruction.  
You may need to adjust the display settings and  
focus on your TV’s setting for the improved 3D  
effect.  
Caution  
Watching a 3D content for a long period  
time may cause dizziness or tiredness.  
>
y
y
It is not recommended to watch a movie  
in 3D mode for infirm, child and pregnant  
woman.  
Note  
,
Some BD-Live contents may be restrictively  
accessed in some territories by contents  
provider’s own decision.  
y
y
If you are experiencing headache, tiredness  
or dizziness while viewing contents in 3D,  
it is strongly recommended to stop the  
playback and rest until you feel normal.  
y
It may take up to several minutes to load  
and start enjoying BD-Live contents.  
Operating 31  
Entering a network user ID and the  
password  
Depending on your PC’s environment, you may  
need to enter a network user ID and the password  
for accessing a shared folder.  
Playing a file on a network  
server  
yui  
This player can play video, audio and photo files  
located in a PC or a DLNA server through your  
home network.  
1. The keyboard menu appears automatically if the  
network user ID and the password are required.  
1. Check the network connection and settings  
(page 19).  
2. Use W/S/A/Dto select a character then  
press ENTER (b) to confirm your selection on  
the virtual keyboard.  
2. Press HOME (n).  
To enter a letter with an accent mark, press  
INFO/DISPLAY (m) to display the extended  
character set.  
3. Select [Movie], [Photo] or [Music] using A/D,  
and press ENTER (b).  
4. Select a DLNA media server or a share folder  
on your PC on the list using W/S, and press  
ENTER (b).  
4
[Cancel] – Clear all entered characters.  
[Space] – Inserts a space at the cursor position.  
[<–] – Deletes the previous character at the  
cursor position.  
If you want to rescan available media server,  
press the green (G) coloured button.  
[ABC / abc / #+-=&] – Change the keyboard  
menu settings to capital letters, small letters or  
symbols.  
5. Select a file using W/S/A/D, and press  
ENTER (b) to play the file.  
Note  
,
3. When you finish entering the network user ID  
and password, select [OK] using W/S/A/D  
and press ENTER (b) to access the folder.  
The file requirements are described on page  
10.  
y
y
The thumbnail of the unplayable files can  
be displayed, but those cannot be played  
on this player.  
The network user ID and password will be  
remembered after accessing the folder for your  
convenience. If you do not want the network user  
ID and password to be remembered, press red (R)  
coloured button to un-tick the [Remember] check  
box before accessing the folder.  
The subtitle file name and movie file name  
have to be the same and located at the  
same folder.  
y
The playback and operating quality may be  
affected by your home network condition.  
y
y
You may experience connection problems  
depending on your server’s environment.  
32 Operating  
Basic operations for video and  
audio content  
Basic operations for photo  
content  
To stop playback  
To play a slide show  
Press Z(STOP) while playback.  
Press d(PLAY) to start slide show.  
To pause playback  
To stop a slide show  
Press M(PAUSE) while playback.  
Press d(PLAY) to resume playback.  
Press Z(STOP) while slide show.  
To pause a slide show  
Press M(PAUSE) while slide show.  
To play frame-by-frame (Video)  
Press M(PAUSE) while movie playback.  
Press M(PAUSE) repeatedly to play Frame-by-Frame  
playback.  
Press d(PLAY) to re-start the slide show.  
To skip to the next/previous photo  
While viewing a photo in full screen, press Aor D  
to go to the previous or next photo.  
To scan forward or backward  
Press cor vto play fast forward or fast reverse  
during playback.  
Using the disc menu  
You can change the various playback speeds by  
4
pressing cor vrepeatedly.  
ero  
To slow down the playing speed  
While the playback is paused, press vrepeatedly  
to play various speeds of slow motion.  
To display the disc menu  
The menu screen may be displayed first after  
loading a disc which contains a menu. If you want  
to display the disc menu while playback, press DISC  
MENU.  
To skip to the next/previous  
chapter/track/file  
During playback, press Cor Vto go to the  
next chapter/track/file or to return to the beginning  
of the current chapter/track/file.  
Use W/S/A/Dbuttons to navigate through  
menu items.  
To display the Pop-up menu  
Some BD-ROM discs contain Pop-up menu that  
appears while playback.  
Press Ctwice briefly to step back to the previous  
chapter/track/file.  
Press TITLE/POPUP while playback, and use  
W/S/A/Dbuttons to navigate through menu  
items.  
In the file list menu of a server, there may have  
many types of contents in a folder together. In this  
case, press Cor Vto go to the previous or  
next content with same type.  
Resume playback  
eroyt  
u
The unit records the point where you pressed the  
Z(STOP) depending on the disc.  
If“MZ(Resume Stop)”appears on the screen briefly,  
press d(PLAY) to resume playback (from the scene  
point).  
If you press Z(STOP) twice or unload the disc,  
“Z(Complete Stop)”appears on the screen. The unit  
will clear the stopped point.  
Operating 33  
Note  
Note  
,
,
The resume point may be cleared when a  
button is pressed (for example; 1(POWER),  
B(OPEN/CLOSE), etc).  
If you press Vonce during Repeat  
Chapter/Track playback, the repeat playback  
cancels.  
y
y
y
This function may not work on some disc or  
title.  
On BD-ROM discs with BD-J, the resume  
playback function does not work.  
y
y
If you press Z(STOP) once during BD-ROM  
interactive title playback, the unit will be in  
Complete Stop mode .  
Repeating a specific portion  
eroty  
This player can repeat a portion you have selected.  
Advanced Playback  
1. While playback, press REPEAT (h) to select  
[A-] at the beginning of the portion you wish to  
repeat.  
Repeat Playback  
2. Press ENTER (b) at the end of the portion. Your  
erotu  
y
During playback, press REPEAT (h) repeatedly to  
select a desired repeat mode.  
selected portion will be repeated continually.  
3. To return to normal playback, press REPEAT (h)  
repeatedly to select [Off].  
4
Note  
,
You cannot select a portion less than 3  
seconds.  
y
y
Blu-ray discs/DVDs/MOVIE  
jA- – Selected portion will be repeated continually.  
This function may not work on some discs  
or titles.  
jChapter – The current chapter will be played  
back repeatedly.  
jTitle – The current title will be played back  
repeatedly.  
jAll – All the tracks or files will be played back  
repeatedly.  
Enlarge the playback image  
eroyi  
1. During playback or pause mode, press ZOOM to  
display the [Zoom] menu.  
To return to normal playback, press REPEAT (h)  
repeatedly to select [Off].  
2. Use red (R) or green (G) coloured button to  
zoom out or in the picture. You can move  
through the zoomed picture using  
W/S/A/Dbuttons.  
Audio CDs/Audio files  
kA-B – Selected portion will be repeated  
continually. (Audio CD only)  
;Track – The current track or file will be played  
back repeatedly.  
3. To return to the normal picture size, press yellow  
(Y) coloured button.  
:All – All the tracks or files will be played back  
repeatedly.  
4. Press BACK (x) to exit the [Zoom] menu.  
l:All – All the tracks or files will be played  
back repeatedly in random order.  
l – The tracks or files will be played back in  
random order.  
To return to normal playback, press CLEAR.  
34 Operating  
Marker Search  
Using the search menu  
eroy  
You can start playback from up to nine memorized  
points.  
eroy  
Using search menu, you can easily to find the point  
where you want to start playback.  
To enter a marker  
To search a point  
1. While playback, press MARKER at the desired  
point. The Marker icon appears on the TV screen  
briefly.  
1. During playback, press SEARCH to display the  
search menu.  
2. Repeat step 1 to add up to nine markers.  
To recall a marked scene  
1. Press SEARCH and the search menu appears on  
the screen.  
2. Press A/Dto skip the playback 15 seconds  
forward or backward. You can select a point that  
you want to skip by pressing and holding  
A/Dbutton.  
2. Press a number button to select a marker  
number that you want to recall. Playback starts  
from the marked scene.  
To start playback from a marked  
scene  
1. Press SEARCH and the search menu appears on  
the screen.  
To delete a Marker  
1. Press SEARCH and the search menu appears on  
the screen.  
4
2. Press Sto highlight a marker number.  
Use A/Dto select a marked scene that you  
want to start playback.  
3. Press ENTER (b) to start playback from the  
marked scene.  
2. Press Sto highlight a marker number.  
Use A/Dto select a marked scene that you  
want to delete.  
Note  
,
This function may not work depending on  
discs, titles, server ability.  
y
y
3. Press CLEAR and the marked scene is erased  
from the search menu.  
This function may not work depending on  
the file type and ability of the media server.  
Note  
,
This function may not work depending on  
discs, titles, server ability.  
y
y
All marked points are cleared if the title  
is in complete stop (Z) mode, the title is  
changed or if you unload the disc.  
If the total length of the title is less than 10  
seconds, this function is not available.  
y
Operating 35  
Changing content list view  
Viewing content information  
yui  
On the [Movie], [Music] or [Photo] menu, you can  
change the content list view.  
y
The player can display the content information.  
1. Select a file using W/S/A/D.  
2. Press INFO/DISPLAY (m) to display the option  
Method 1  
Press red (R) coloured button repeatedly.  
menu.  
3. Select the [Information] option using W/S,  
and press ENTER (b).  
The file information appears on the screen.  
While movie playback, you can display the file  
information by pressing TITLE/POPUP.  
Note  
,
The information displayed on the screen  
may not correct comparing actual content  
information.  
Selecting a subtitle file  
4
y
If the subtitle file name is different from the movie  
file name, you need to select the subtitle file on the  
[Movie] menu before playing the movie.  
1. Use W/S/A/Dto select the subtitle file you  
wish to play in the [Movie] menu.  
2. Press ENTER (b).  
Method 2  
Press ENTER (b) again to deselect the subtitle  
file. Selected subtitle file will be displayed when  
you play the movie file.  
1. On the content list, press INFO/DISPLAY (m) to  
display the option menu.  
Note  
2. Use W/Sto select the [View Change] option.  
,
If you press Z(STOP) while playback, the  
y
y
3. Press ENTER (b) to change the content list  
subtitle selection is cancelled.  
view.  
This function is not available for playing file  
on a server via home network.  
36 Operating  
Last Scene Memory  
er  
This unit memorizes the last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the unit or switch  
off the unit. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
e Rotate – Press ENTER ( ) to rotate the  
b
photo clockwise.  
f Zoom – Press ENTER (b) to display the  
[Zoom] menu.  
g Effect – Use A/Dto select a transition  
effect between photos in a slide show.  
h Speed – Use A/Dto select a delaying  
speed between photos in a slide show.  
Note  
,
3. Press BACK (x) to exit the option menu.  
Last Scene Memory function for a previous  
disc is erased once a different disc is played.  
y
y
y
y
Listening to music while slide  
show  
This function may not work depending on  
the disc.  
On BD-ROM discs with BD-J, the last scene  
memory function does not work.  
i
This unit does not memorize settings of  
a disc if you switch off the unit before  
commencing to play it.  
You can display photo files while listening to audio  
files.  
1. While viewing a photo in full screen, press INFO/  
DISPLAY (m) to display the option menu.  
4
2. Use W/Sto select [Music Select] option, and  
press ENTER (b) to display the [Music Select]  
menu.  
Options while viewing a photo  
i
3. Use W/Sto select a device, and press  
You can use various options during viewing a  
photo in full screen.  
ENTER (b).  
Device that you can select are differ depending  
on the location of the photo file you are  
displaying in full screen.  
1. While viewing a photo in full screen, press INFO/  
DISPLAY (m) to display the option menu.  
2. Select an option using W/S.  
Photo location  
Disc, USB  
Available Device  
Disc, USB  
Share Folder (PC)  
DLNA server  
Share Folder (PC)  
DLNA server  
4. Use W/Sto select a file or a folder you wish to  
play.  
a Current photo/Total number of photos  
– Use A/Dto view previous/next photo.  
b Slide Show – Press ENTER (b) to start or  
pause slide show.  
Select gand press ENTER (b) to display the  
upper directory.  
c Music Select – Select the background  
music for the slide show (page 36).  
d Music –Press ENTER (b) to start or pause  
background music.  
Operating 37  
Note  
2. Select an option using W/S.  
,
When selecting music file from a server, folder  
selection is not available. Only file selection is  
available.  
3. Use A/Dto adjust the selected option value.  
4. Press BACK (x) to exit the On-Screen display.  
Note  
,
5. Use Dto select [OK], and press ENTER (b) to  
If no button is pressed for a few seconds,  
the on-screen display disappears.  
y
y
y
y
complete music selection.  
A title number cannot be selected on some  
discs.  
On-Screen display  
You can display and adjust various information and  
settings about the content.  
Available items may differ depending on  
discs or titles.  
If an interactive Blu-ray Disc is playing back,  
some setting information is displayed on  
the screen but prohibited to be changed.  
Displaying content information  
on-screen  
eroy  
Playing from selected time  
eroy  
1. While playback, press INFO/DISPLAY (m) to  
show various playback information.  
4
1. Press INFO/DISPLAY (m) during playback. The  
time search box shows the elapsed playing  
time.  
2. Select the [Time] option and then input the  
required start time in hours, minutes, and  
seconds from left to right.  
For example, to find a scene at 2 hours, 10  
minutes, and 20 seconds, enter“21020”.  
Press A/Dto skip the playback 60 seconds  
forward or backward.  
3. Press ENTER (b) to start playback from selected  
time.  
Note  
,
This function may not work on some disc or  
titles.  
y
y
a Title – current title number/total number of  
titles  
This function may not work depending on  
the file type and ability of the DLNA server.  
b Chapter – current chapter number/total  
number of chapters  
c Time – elapsed playing time/total playback  
time  
d Audio – selected audio language or channel  
e Subtitle – selected subtitle.  
f Angle – selected angle/total number of  
angles  
g TV Aspect Ratio – selected TV aspect Ratio  
h Picture Mode – selected picture mode  
38 Operating  
Hearing a different audio  
Watching from a different  
angle  
er  
If the disc contains scenes recorded at different  
camera angles, you can change to a different  
camera angle during playback.  
eroy  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Use W/Sto select the [Audio] option.  
3. Use A/Dto select desired audio language,  
audio track or audio channel.  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
Note  
,
2. Use W/Sto select the [Angle] option.  
3. Use A/Dto select desired angle.  
Some discs allow you to change audio  
selections only via the disc menu. In this  
case, press TITLE/POP-UP or DISC MENU  
button and choose the appropriate audio  
from the selections on the disc menu.  
y
4. Press BACK (x) to exit the On-Screen display.  
Changing the TV Aspect Ratio  
eroy  
You can change the TV aspect ratio setting while  
playback.  
Immediately after you have switched sound,  
there may be a temporary discrepancy  
between the display and actual sound.  
y
y
On BD-ROM disc, the multi audio format  
(5.1CH or 7.1CH) is displayed with [MultiCH]  
in the on-screen display.  
4
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Use W/Sto select the [TV Aspect Ratio]  
option.  
Selecting a subtitle language  
3. Use A/Dto select desired option.  
eroy  
4. Press BACK (x) to exit the On-Screen display.  
1. During playback, press INFO/DISPLAY (m) to  
Note  
,
display the On-Screen display.  
Even if you change the value of the [TV Aspect  
Ratio] option in On-Screen display, the [TV  
Aspect Ratio] option in the [Setup] menu is  
not changed.  
2. Use W/Sto select the [Subtitle] option.  
3. Use A/Dto select desired subtitle language.  
4. Press BACK (x) to exit the On-Screen display.  
Note  
,
Some discs allow you to change subtitle  
selections only via the disc menu. If this is the  
case, press TITLE/POPUP or DISC MENU button  
and choose the appropriate subtitle from the  
selections on the disc menu.  
Operating 39  
Changing the Picture Mode  
Changing subtitle code page  
eroy  
y
You can change the [Picture mode] option while  
playback.  
If the subtitle is displayed in broken letter, you can  
change the subtitle code page to view the subtitle  
file properly.  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
1. During playback, press INFO/DISPLAY (m) to  
display the playback menu.  
2. Use W/Sto select the [Picture Mode] option.  
3. Use A/Dto select desired option.  
2. Use W/Sto select the [Code Page] option.  
3. Use A/Dto select desired code option.  
4. Press BACK (x) to exit the On-Screen display.  
Setting the [User setting] option  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Use W/Sto select the [Picture Mode] option.  
3. Use A/Dto select the [User setting] option,  
and press ENTER (b).  
4
4. Press BACK (x) to exit the On-Screen display.  
4. Use W/S/A/Dto adjust the [Picture Mode]  
options.  
Select [Default] option then press ENTER (b) to  
reset the all video adjustments.  
5. Use W/S/A/Dto select the [Close] option,  
and press ENTER (b) to finish setting.  
40 Operating  
Enjoying the NetCast™  
Entertainment Access  
You can use various content services via Internet  
with the NetCast Entertainment Access feature.  
1. Check the network connection and settings  
(page 19).  
2. Press HOME (n).  
3. Select the [NetCast] using A/D, and press  
ENTER (b).  
4. Select an option using W/S/A/D, and press  
ENTER (b).  
4
Note  
,
Detailed information of each service,  
contact to the content provider or visit  
support link of the service.  
y
y
The content of NetCast services and service  
related information, including user interface,  
is subject to changes. Please refer to the  
web site of each service for most up-to-date  
information.  
When you are first time to access [NetCast]  
feature, current country setting appears.  
If you want to change the country setting,  
select [Edit] and press ENTER (b).  
y
Troubleshooting 41  
Troubleshooting  
General  
Symptom  
Cause & Solution  
The Power does not turned on.  
Plug the power cord into the wall outlet securely.  
y
The unit does not start  
playback.  
Insert a playable disc. (Check the disc type, colour system, and  
regional code.)  
y
Place the disc with the playback side down.  
Place the disc on the disc tray correctly inside the guide.  
Clean the disc.  
y
y
y
y
Cancel the Rating function or change the rating level.  
The angle cannot be changed.  
Multi-angles are not recorded on the DVD Video being played.  
y
Cannot play movie, photo or  
music files.  
The files are not recorded in a format that the unit can play.  
The unit does not support the codec of the movie file.  
y
y
The remote control does not  
work properly.  
The remote control is not pointed at the remote sensor of the unit.  
The remote control is too far from the unit.  
y
y
y
y
There is an obstacle in the path of the remote control and the unit.  
The batteries in the remote control are exhausted.  
5
The unit is plugged in, but the You can reset the unit as follows.  
power will not turn on or off.  
Unplug the power cord, wait at least five seconds, and then plug it in  
y
again.  
The unit is not operating  
normally.  
42 Troubleshooting  
Network  
Symptom  
Cause & Solution  
BD-Live feature does not  
work.  
The connected USB storage may not have enough space. Connect  
the USB storage with at least 1GB free space.  
y
y
y
Ensure that the unit is correctly connected to the local area network  
and can access the internet (see page 19).  
Your broadband speed may not fast enough to use the BD-Live  
features. Contact your Internet Service Provider (ISP) and increase the  
broadband speed is recommended.  
The [BD-LIVE connection] option in the [Setup] menu is set to  
[Prohibited]. Set the option to [Permitted].  
y
y
Streaming video services (such  
as YouTube™, etc.) are often  
stopped or“buffer”during  
playback.  
Your broadband service speed may not be fast enough to stream  
video services. Contact your Internet Service Provider (ISP) and  
increase the broadband speed is recommended.  
Shared folder or files from your  
PC or a media server are not  
displayed on the device list.  
The firewall or anti-virus software on your media server is running.  
Turn off the firewall or anti-virus software running on your PC or  
media server.  
y
y
The player is not connected to the local area network that your PC or  
the media server are connected.  
Picture  
5
Symptom  
Cause & Solution  
There is no picture.  
Select the appropriate video input mode on the TV so the picture  
from the unit appears on the TV screen.  
y
Connect the video connection securely.  
y
y
Check the [HDMI Color Setting] in the [Setup] menu is set to the  
appropriate item that conforms to your video connection.  
Your TV may not support the resolution you have set on the player.  
Change the resolution that your TV accepts.  
y
y
The player’s HDMI OUT jack is connected to a DVI device that does  
not support copyright protection.  
Picture noise appears.  
You are playing a disc recorded in a Colour system that is different  
from your TV.  
y
Set the resolution which your TV accepts.  
y
y
Blu-ray 3D disc playback does  
not output 3D views.  
Connect the player to your TV with HDMI cable (Type A, High Speed  
HDMI™ Cable).  
Your TV may not support“HDMI 1.4 3D mandatory format”.  
y
y
The [3D Mode] option in the [Setup] menu is set to [Off].  
Set the option to [On].  
Troubleshooting 43  
Sound  
Symptom  
Cause & Solution  
There is no sound or the sound  
is distorted.  
Connect the audio connection securely.  
y
y
The input source setting on the amplifier or the connection to the  
amplifier is incorrect.  
The unit is in scan, slow motion, or pause mode.  
The sound volume is low.  
y
y
y
Check that the connected amplifier is compatible with audio format  
output from the unit.  
The unit’s HDMI OUT jack is connected to a DVI device. The DVI jack  
does not accept audio signal.  
y
y
Check the device connected to unit’s HDMI OUT jack is compatible  
with audio format output from the unit.  
Customer Support  
You can update the Player using the latest software to enhance the products operation and/or add new  
features. To obtain the latest software for this player (if updates have been made),  
please visit http://lgservice.com or contact LG Electronics customer care centre.  
Open source software notice  
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit  
http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are  
available to download with the source code.  
5
44 Appendix  
Setting up the remote to  
control your TV  
Controlling a TV with  
the Supplied Remote  
Control  
You can operate your TV with the supplied remote  
control.  
If your TV is listed in the table below, set the  
appropriate manufacturer code.  
You can control your TV using the buttons below.  
1. While holding down 1(TV POWER) button,  
and press the manufacturer code for your  
TV with the numerical buttons (see the table  
below).  
Manufacturer  
LG  
Code Number  
1(Default), 2  
Zenith  
1, 3, 4  
1, 2  
6, 7  
8, 9  
4
GoldStar  
Samsung  
Sony  
By pressing  
You can  
1(TV POWER)  
Turn the TV on or off.  
Switch the TV’s input source  
between the TV and other  
input sources.  
Hitachi  
AV/INPUT  
2. Release the 1(TV POWER) button to complete  
setting.  
Scan up or down through  
memorized channels.  
PR/CH W/S  
Depending on your TV, some or all buttons may not  
function on the TV, even after entering the correct  
manufacturer code. When you replace the batteries  
of the remote, the code number you have set may  
be reset to the default setting. Set the appropriate  
code number again.  
VOL +/–  
Adjust the volume of the TV  
Note  
,
Depending on the unit being connected, you  
may not be able to control your TV using some  
of the buttons.  
6
Appendix 45  
Software Update  
Network Software  
Update  
You can update the player using the latest software  
to enhance the products operation and/or add  
new features. You can update the software by  
connecting the unit directly to the software update  
server.  
Network update notification  
Note  
,
From time to time, performance improvements  
and/or additional features or services may be  
made available to units that are connected to a  
broadband home network. If there is new software  
available and the unit is connected to a broadband  
home network, the player will inform you about the  
update as follows.  
Before updating the software in your player,  
remove any disc and USB Device from the  
player.  
y
Before updating the software in your player,  
turn the player off and then turn it back on.  
y
y
During the software update procedure,  
do not turn off the player or disconnect  
AC power, or do not press any button.  
Option 1:  
1. The update menu will appear on the screen  
when you turn on the player.  
If you cancel the update, turn off the power  
and turn it on for stable performance.  
y
y
2. Use A/Dto select a desired option and then  
This unit cannot be updated to previous  
software version.  
press ENTER (b).  
1. Check the network connection and settings  
(page 19).  
2. Select [Software] option in the [Setup] menu  
then press ENTER (b).  
3. Select [Update] option, and press ENTER (b).  
[OK]  
Starts the software update.  
6
[Cancel]  
Exits the update menu and  
displays it next booting.  
[Hide]  
Exits the update menu and  
it does not appear until next  
software is uploaded in the  
update server.  
The player will check for the newest update.  
Note  
,
Pressing ENTER (b) while checking for the  
y
y
Option 2:  
update will end the process.  
If the software update is available from the update  
server, the“Software Update”icon appears at the  
bottom of the Home menu. Press blue (B) colored  
button to start the update procedure.  
If there is no update available, the Message,  
“No update is found.”appears. Press  
ENTER (b) to return to the [Home Menu].  
4. If newer version exists, the message“A new  
update was found. Do you want to download  
it?”appears.  
46 Appendix  
5. Select [OK] to download the update. (Selecting  
[Cancel] will end the update.)  
About Nero  
MediaHome 4  
Essentials  
6. The player starts downloading the newest  
update from the server. (Downloading will  
takes several minutes depending on your home  
network condition)  
7. When downloading is completed, the message,  
“Download is complete. Do you want to  
update?”appears.  
Nero MediaHome 4 Essentials is a software for  
sharing video, audio and photo files stored on your  
computer to this player as a DLNA-compatiable  
digital media server.  
8. Select [OK] to start updating.  
(Selecting [Cancel] will end the update and  
downloaded file will not be re-usable. To update  
software the next time, the software update  
procedure has to be started from the beginning  
again.)  
Note  
,
The Nero MediaHome 4 Essentials CD-  
ROM is designed for PCs and should not  
be inserted in this player or in any product  
other than a PC.  
y
y
y
y
Caution  
>
The supplied Nero MediaHome 4 Essentials  
CD-ROM is a customized software edition  
only for sharing files and folders to this  
player.  
Do not turn off the power during the software  
update.  
Note  
,
The supplied Nero MediaHome 4 Essentials  
software does not support following  
functions: Transcoding, Remote UI, TV  
control, Internet services and Apple iTunes  
If the software includes the driver update, disc  
tray may open during the process.  
9. When update is completed, the power will be  
turned off automatically in a few seconds.  
This manual explains operations with  
the English version of Nero MediaHome  
4 Essentials as examples. Follow the  
explanation referring to the actual  
operations of your language version.  
10. Turn the power back on. The system now  
operates with the new version.  
Note  
,
The Software Update function may not  
work properly depending on your internet  
environment. In this case, you can obtain  
the latest software from the authorized LG  
Electronics Service centre then update your  
player. Refer to“Customer Support”on page 43.  
6
Installing Nero MediaHome 4  
Essentials  
Before you install Nero MediaHome 4 Essentials,  
check the system requirement shown below.  
Windows® XP (Service Pack 2 or higher), Windows  
Vista® (no Service Pack required), Windows® XP  
Media Centre Edition 2005 (Service Pack 2 or  
higher), Windows Server® 2003  
y
Windows Vista® 64-bit edition (application runs  
in 32-bit mode)  
y
y
Hard drive space: 200 MB hard drive space for a  
typical installation of Nero MediaHome stand-  
alone  
1.2 GHz Intel® Pentium® III or AMD  
Sempron™ 2200+ processors  
y
y
Memory: 256 MB RAM  
Appendix 47  
Graphics card with at least 32 MB video memory,  
minimum resolution of 800 x 600 pixels, and 16-  
bit Colour settings.  
y
Sharing files and folders  
On your computer, you must share the folder  
contained movie, music and/or photo content to  
play them on this player.  
Windows® Internet Explorer® 6.0 or higher  
DirectX® 9.0c revision 30 (August 2006) or higher  
Network environment: 100 Mb Ethernet, WLAN  
y
y
y
This parts explains the procedure for selecting the  
shared folders on your computer.  
Start up your computer, and insert the supplied CD-  
ROM disc into your computer’s CD-ROM drive. An  
installation wizard will walk you through the quick  
and uncomplicated installation process. To install  
Nero MediaHome 4 Essentials, proceed as follows:  
1. Double-click the“Nero MediaHome 4 Essentials”  
icon on the desktop.  
2. Click [Network] icon on the left and define your  
network name in the [Network name] field. The  
Network name you enter will be recognized by  
your player.  
1. Close all Microsoft Windows programs and exit  
any anti-virus software that may be running.  
3. Click [Shares] icon on the left.  
2. Insert the supplied CD-ROM disc into your  
computer’s CD-ROM drive.  
4. Click [Local Folders] tab on the [Shares] screen.  
5. Click [Add] icon to open the [Browse Folder]  
window.  
3. Click [Nero MediaHome 4 Essentials].  
4. Click [Run] to start installation.  
6. Select the folder containing the files you want  
to share. The selected folder is added to the list  
of shared folders.  
5. Click [Nero MediaHome 4 Essentials]. The  
installation is prepared and the installation  
wizard appears.  
7. Click [Start Server] icon to start the server.  
6. Click the [Next] button to display the serial  
number input screen. Click [Next] to go to the  
next step.  
Note  
,
If the shared folders or files are not displayed  
on the player, click the folder on the [Local  
Folders] tab and click [Rescan Folder] at the  
[More] button.  
y
y
7. If you accept all conditions, click [I accept  
the License Conditions] check box and click  
[Next]. Installation is not possible without this  
agreement.  
Visit www.nero.com for more information  
and software tools.  
8. Click [Typical] and click [Next]. The installation  
process is started.  
6
9. If you want to take part in the anonymous  
collection of data, select the check box and click  
the [Next] button.  
10. Click the [Exit] button to complete the  
installation.  
48 Appendix  
Area Code List  
Choose an area code from this list.  
Area  
Code Area  
AF Fiji  
Code Area  
FJ Monaco  
Code Area  
Code  
SG  
SK  
MC  
MN  
MA  
NP  
NL  
AN  
NZ  
NG  
NO  
OM  
PK  
Singapore  
Afghanistan  
Argentina  
Australia  
Austria  
FI Mongolia  
FR Morocco  
DE Nepal  
Slovak Republic  
Slovenia  
AR Finland  
AU France  
AT Germany  
BE Great Britain  
BT Greece  
BO Greenland  
BR Hong Kong  
KH Hungary  
CA India  
SI  
South Africa  
South Korea  
Spain  
ZA  
KR  
Belgium  
Bhutan  
GB Netherlands  
GR Antilles  
GL New Zealand  
HK Nigeria  
HU Norway  
IN Oman  
ES  
Sri Lanka  
Sweden  
LK  
Bolivia  
SE  
Brazil  
Switzerland  
Taiwan  
CH  
TW  
TH  
TR  
Cambodia  
Canada  
Chile  
ID Pakistan  
IL Panama  
Thailand  
CL Indonesia  
CN Israel  
PA  
Turkey  
China  
IT Paraguay  
JM Philippines  
JP Poland  
PY  
Uganda  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Colombia  
Congo  
CO Italy  
PH  
PL  
Ukraine  
CG Jamaica  
CR Japan  
United States  
Uruguay  
Costa Rica  
Croatia  
HR Kenya  
KE Portugal  
KW Romania  
LY Russian  
PT  
RO  
Uzbekistan  
Vietnam  
Czech Republic  
Denmark  
Ecuador  
Egypt  
CZ Kuwait  
DK Libya  
Federation  
RU  
SA  
SN  
LU  
Zimbabwe  
EC Luxembourg  
EG Malaysia  
SV Maldives  
ET Mexico  
Saudi Arabia  
MY  
Senegal  
6
El Salvador  
Ethiopia  
MV  
MX  
Appendix 49  
Language Code List  
Use this list to input your desired language for the following initial settings: [Disc Audio],  
[Disc Subtitle] and [Disc Menu].  
Language  
Afar  
Code Language  
6565 French  
6570 Frisian  
Code Language  
7082 Lithuanian  
7089 Macedonian  
7176 Malagasy  
7565 Malay  
Code Language  
Code  
8368  
8373  
8375  
8376  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8469  
8472  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
7684 Sindhi  
7775 Singhalese  
7771 Slovak  
7783 Slovenian  
7776 Spanish  
7773 Sudanese  
7782 Swahili  
7779 Swedish  
7778 Tagalog  
7865 Tajik  
Afrikaans  
Albanian  
Ameharic  
Arabic  
8381 Galician  
6577 Georgian  
6582 German  
7289 Greek  
6869 Malayalam  
6976 Maori  
Armenian  
Assamese  
Aymara  
6583 Greenlandic  
6588 Guarani  
6590 Gujarati  
6665 Hausa  
7576 Marathi  
7178 Moldavian  
7185 Mongolian  
7265 Nauru  
Azerbaijani  
Bashkir  
Basque  
6985 Hebrew  
6678 Hindi  
7387 Nepali  
7869 Tamil  
Bengali; Bangla  
Bhutani  
Bihari  
7273 Norwegian  
7285 Oriya  
7879 Telugu  
7982 Thai  
6890 Hungarian  
6672 Icelandic  
6682 Indonesian  
6671 Interlingua  
7789 Irish  
7383 Panjabi  
8065 Tonga  
8083 Turkish  
7065 Turkmen  
8076 Twi  
Breton  
7378 Pashto, Pushto  
7365 Persian  
Bulgarian  
Burmese  
Byelorussian  
Chinese  
Croatian  
Czech  
7165 Polish  
6669 Italian  
7384 Portuguese  
7465 Quechua  
8084 Ukrainian  
8185 Urdu  
9072 Japanese  
7282 Kannada  
6783 Kashmiri  
6865 Kazakh  
7876 Kirghiz  
7578 Rhaeto-Romance 8277 Uzbek  
6
7583 Rumanian  
7575 Russian  
7589 Samoan  
7579 Sanskrit  
7585 Scots Gaelic  
7679 Serbian  
7665 Serbo-Croatian  
7686 Shona  
8279 Vietnamese  
Danish  
8285 Volapük  
8377 Welsh  
8365 Wolof  
7168 Xhosa  
8382 Yiddish  
8372 Yoruba  
8378 Zulu  
Dutch  
Korean  
English  
6978  
6979  
6984  
7079  
7074  
7073  
Kurdish  
Esperanto  
Estonian  
Faroese  
Fiji  
Laothian  
Latin  
Latvian, Lettish  
Lingala  
7678  
Finnish  
50 Appendix  
Trademarks and  
Licenses  
Manufactured under license under U.S. Patent  
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;  
6,226,616; 6,487,535; 7,212,872; 7,333,929;  
7,392,195; 7,272,567 & other U.S. and worldwide  
patents issued & pending. DTS and the symbol  
are registered trademarks, & DTS-HD, DTS-HD  
Master Audio, and the DTS logos are trademarks  
of DTS, Inc. Product includes software. © DTS, Inc.  
All Rights Reserved.  
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,  
BONUSVIEW™ and the logos are trademarks of  
the Blu-ray Disc Association.  
“DVD Logo”is a trademark of DVD Format/Logo  
Licensing Corporation.  
Java and all Java-based trademarks and logos  
are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and other  
countries.  
DLNA®, the DLNA Logo and DLNA CERTIFIED® are  
trademarks, service marks, or certification marks  
of the Digital Living Network Alliance.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI licensing LLC.  
“x.v.Colour”is a trademark of Sony Corporation.  
6
“AVCHD”and the“AVCHD”logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
DivX®, DivX Certified® and associated logos  
are trademark of DivX, Inc., and are used under  
license.  
Appendix 51  
Audio Output Specifications  
4
Jack/Setting  
Digital Output (SPDIF) (DIGITAL AUDIO OUT)  
*
Analog  
Source  
2CH Output  
DTS Re-encode*3 *5  
Primary Pass-Thru  
Dolby Digital  
Dolby Digital  
Dolby Digital  
DTS  
PCM Stereo  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS  
DTS  
DTS (2ch)  
DTS  
DTS-HD  
DTS  
DTS  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
DTS  
PCM 2ch  
DTS  
PCM 2ch  
DTS  
PCM 2ch  
Jack/Setting  
Source  
HDMI OUT  
DTS Re-encode*3 *5  
1
2
3
3
Primary Pass-Thru  
* * *  
PCM Stereo  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM Multi-Ch  
PCM 2ch  
*
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
PCM 2ch  
DTS  
PCM 2ch  
DTS (2ch)  
DTS  
PCM 5.1ch  
PCM 7.1ch  
PCM 2ch  
DTS-HD  
DTS  
DTS-HD  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
DTS  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
PCM 5.1ch  
PCM 7.1ch  
DTS  
DTS  
6
*1 The secondary and interactive audio may  
not be included in the output bitstream if  
[Digital Output (SPDIF)] or [HDMI] option is set  
to [Primary Pass-Thru]. (Except LPCM Codec  
: the output always include interactive and  
secondary audio.)  
*5 If the [HDMI] or [Digital Output (SPDIF)] option  
is set to [DTS re-encode], the audio output is  
limited to 48 kHz and 5.1Ch. If the [HDMI] or  
[Digital Output (SPDIF)] option is set to [DTS re-  
encode], the DTS Re-encode audio is outputted  
for BD-ROM discs, and the original audio is  
outputted for the other discs (like [Primary Pass-  
Thru]).  
*2 This player automatically selects the HDMI audio  
according to the decoding capability of the  
connected HDMI device even though [HDMI]  
option is set to [Primary Pass-Thru].  
If the HDMI OUT jack is connected to your TV  
with High Speed HDMITM Cable and Dolby Digital  
Plus/Dolby TrueHD is outputted from HDMI OUT  
jack, DIGITAL AUDIO OUT jack is limited to“PCM  
2ch”(When the HDMI and DIGITAL AUDIO OUT  
are connected simultaneously).  
y
*3 The [PCM Multi-CH]/[Primary Pass-Thru]  
setting of the [HDMI] option and [DTS re-  
encode] setting of the [Digital Output (SPDIF)]  
option cannot be set together. If you set them  
together, the [HDMI] or [Digital Output (SPDIF)]  
option is set to [PCM Stereo] automatically.  
The audio is outputted as PCM 48 kHz/16 bit for  
MP3/WMA file and PCM 44.1kHz/16 bit for Audio  
CD while playback.  
y
*4 On the PCM audio output, the sampling  
frequency of DIGITAL AUDIO OUT is limited to  
96 kHz.  
52 Appendix  
You must select a digital audio output and  
a maximum sampling frequency that your  
Amplifier (or AV receiver) accepts using [Digital  
Output (SPDIF)], [HDMI] and [Sampling Freq.]  
options on the [Setup] menu (see page 26).  
y
With digital audio connection (DIGITAL AUDIO  
OUT or HDMI), Disc Menu button sounds of BD-  
ROM may not be heard if the [Digital Output  
(SPDIF)] or [HDMI] option is set to [Primary Pass-  
Thru].  
y
If the audio format of the digital output does  
not match the capabilities of your receiver, the  
receiver will produce a strong, distorted sound  
or no sound at all.  
y
y
Multi-channel Digital Surround Sound via digital  
connection can only be obtained if your receiver  
is equipped with a Digital Multi-channel decoder.  
6
Appendix 53  
Specifications  
General  
Power requirements  
Power consumption  
Dimensions (W x H x D)  
Net Weight (Approx.)  
Operating temperature  
Operating humidity  
Refer to main label on the rear panel.  
16 W  
Approx. 430 x 45 x 190 mm  
1.6 kg  
5 °C to 35 °C  
5 % to 90 %  
Outputs  
VIDEO OUT  
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1  
19 pin (Type A, HDMITM Connector)  
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1  
3 V (p-p), Optical jack x 1  
HDMI OUT (video/audio)  
ANALOG AUDIO OUT  
DIGITAL AUDIO OUT (OPTICAL)  
System  
Laser  
Semiconductor laser  
wavelength  
405 nm / 650 nm  
Signal system  
Standard NTSC /PAL Colour TV system  
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)  
More than 90 dB (ANALOG OUT connectors only)  
Less than 0.02%  
Frequency response  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
LAN port  
More than 95 dB  
6
Ethernet jack x 1, 10BASE-T / 100BASE-TX  
DC 5 V 0500 mA  
Bus Power Supply (USB)  
Design and specifications are subject to change without notice.  
y
54 Appendix  
Notes on Discs  
Maintenance  
Handling Discs  
Do not touch the playback side of the disc. Hold  
the disc by the edges so that fingerprints do not  
get on the surface. Never stick paper or tape on the  
disc.  
Handling the Unit  
When shipping the unit  
Please save the original shipping carton and  
packing materials. If you need to ship the unit, for  
maximum protection, re-pack the unit as it was  
originally packed at the factory.  
Storing Discs  
After playing, store the disc in its case. Do not  
expose the disc to direct sunlight or sources of heat  
and never leave it in a parked car exposed to direct  
sunlight.  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide  
spray near the unit.  
y
y
y
Cleaning Discs  
Wiping with strong pressure may damage the  
surface.  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the centre to out.  
Do not leave rubber or plastic products in  
contact with the unit for a long period of time.  
Cleaning the unit  
Do not use strong solvents such as alcohol,  
benzine, thinner, commercially available cleaners,  
or anti-static spray intended for older vinyl records.  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution. Do not  
use strong solvents such as alcohol, benzine, or  
thinner, as these might damage the surface of the  
unit.  
Maintaining the Unit  
The unit is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty  
or worn, the picture quality could be diminished.  
For details, please contact your nearest authorized  
service centre.  
6
Appendix 55  
Important Information  
Relating to Network  
Services  
All information, data, documents, communications,  
downloads, files, text, images, photographs,  
graphics, videos, webcasts, publications, tools,  
resources, software, code, programs, applets,  
widgets, applications, products and other content  
(“Content”) and all services and offerings (“Services”)  
provided or made available by or through any  
third party (each a“Service Provider”) is the sole  
responsibility of the Service Provider from whom it  
originated.  
The availability of and access to Content and  
Services furnished by the Service Provider through  
the LGE Device are subject to change at any time,  
without prior notice, including, but not limited to  
the suspension, removal or cessation of all or any  
part of the Content or Services.  
Should you have any inquiry or problem related  
to the Content or Services, you may refer to the  
Service Provider’s website for the most updated  
information. LGE is neither responsible nor liable  
for customer service related to the Content and  
Services. Any question or request for service  
relating to the Content or Services should be made  
directly to the respective Content and Service  
Providers.  
6
Please note that LGE is not responsible for any  
Content or Services provided by the Service  
Provider or any changes to, removal of, or cessation  
of such Content or Services and does not warrant  
or guaranty the availability of or access to such  
Content or Services.  

Raritan Computer Calculator PMG 0I v203 E User Manual
Planar Systems Car Video System PT1745S User Manual
Philips 170B6 User Manual (2)
Panasonic Strada CN NVD905U User Manual
Panasonic Lumix H FS014042 User Manual
Panasonic HDC DX1P User Manual
Panasonic Camera Lens H FS14140 User Manual
Panasonic AJ SPX900E User Manual
Orion Car Audio Coaxial Speaker XTR522 User Manual
LG Electronics HBM 760 User Manual