LG Electronics LG Lifes Good Blu ray Player BD560C User Manual

OWNER’S MANUAL  
Network Blu-ray Disc™/  
DVD Player  
Please read this manual carefully before operating  
your set and retain it for future reference.  
MODEL  
BD560C  
P/NO : MFL62881820  
BD561-N-BCANLLK-ENG.indd  
1
2010.1.22 8:31:24 PM  
Safety Information  
3
1
1
Safety Information  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK  
CAUTION: This product employs a Laser System.  
To ensure proper use of this product, please read  
this owner’s manual carefully and retain it for future  
reference. Shall the unit require maintenance,  
contact an authorized service center.  
Use of controls, adjustments or the performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
DO NOT REMOVE COVER (OR BACK) NO USER-  
SERVICEABLE PARTS INSIDE REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL.  
This lightning flash with arrowhead  
symbol within an equilateral triangle  
is intended to alert the user to the  
presence of uninsulated dangerous  
voltage within the product’s  
To prevent direct exposure to laser beam, do not try  
to open the enclosure. Visible laser radiation when  
open. DO NOT STARE INTO BEAM.  
enclosure that may be of sufficient magnitude to  
constitute a risk of electric shock to persons.  
CAUTION concerning the Power Cord  
The exclamation point within an  
equilateral triangle is intended  
to alert the user to the presence  
Most appliances recommend they be placed upon a  
dedicated circuit;  
of important operating and  
That is, a single outlet circuit which powers only  
that appliance and has no additional outlets or  
branch circuits. Check the specification page of this  
owner’s manual to be certain. Do not overload wall  
outlets. Overloaded wall outlets, loose or damaged  
wall outlets, extension cords, frayed power cords, or  
damaged or cracked wire insulation are dangerous.  
Any of these conditions could result in electric  
shock or fire. Periodically examine the cord of your  
appliance, and if its appearance indicates damage  
or deterioration, unplug it, discontinue use of the  
appliance, and have the cord replaced with an exact  
replacement part by an authorized service centre.  
Protect the power cord from physical or mechanical  
abuse, such as being twisted, kinked, pinched, closed  
in a door, or walked upon. Pay particular attention  
to plugs, wall outlets, and the point where the cord  
exits the appliance. To disconnect power from the  
mains, pull out the mains cord plug. When installing  
the product, ensure that the plug is easily accessible.  
maintenance (servicing) instructions  
in the literature accompanying the product.  
Cautions and Warnings  
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK  
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN  
OR MOISTURE.  
WARNING: Do not install this equipment in a  
confined space such as a book case or similar unit.  
CAUTION: Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the  
product and to protect it from over heating. The  
openings shall be never be blocked by placing  
the product on a bed, sofa, rug or other similar  
surface. This product shall not be placed in a built-  
in installation such as a bookcase or rack unless  
proper ventilation is provided or the manufacturer’s  
instruction has been adhered to.  
BD561-N-BCANLLK-ENG.indd  
3
2010.1.22 8:31:27 PM  
4
Safety Information  
This device is equipped with a portable battery or  
accumulator.  
Notes on Copyrights  
Because AACS (Advanced Access Content System)  
is approved as content protection system for BD  
format, similar to use of CSS (Content Scramble  
System) for DVD format, certain restrictions are  
imposed on playback, analog signal output, etc.,  
of AACS protected contents. The operation of this  
product and restrictions on this product may vary  
depending on your time of purchase as those  
restrictions may be adopted and/or changed by  
AACS after the production of this product.  
Safety way to remove the battery or the battery  
from the equipment: Remove the old battery  
or battery pack, follow the steps in reverse order  
than the assembly. To prevent contamination of  
the environment and bring on possible threat  
to human and animal health, the old battery or  
the battery put it in the appropriate container at  
designated collection points. Do not dispose of  
batteries or battery together with other waste.  
It is recommended that you use local, free  
1
Furthermore, BD-ROM Mark and BD+ are  
additionally used as content protection systems  
for BD format, which imposes certain restrictions  
including playback restrictions for BD-ROM  
Mark and/or BD+ protected contents. To obtain  
additional information on AACS, BD-ROM Mark,  
BD+, or this product, please contact an authorized  
Customer Service Centre.  
reimbursement systems batteries and accumulators.  
The battery shall not be exposed to excessive heat  
such as sunshine, fire or the lile.  
CAUTION: The apparatus shall not be exposed to  
water (dripping or splashing) and no objects filled  
with liquids, such as vases, shall be placed on the  
apparatus.  
Many BD-ROM/DVD discs are encoded with  
copy protection. Because of this, you should only  
connect your player directly to your TV, not to a  
VCR. Connecting to a VCR results in a distorted  
picture from copy-protected discs.  
This product incorporates copyright protection  
technology that is protected by U.S. patents  
and other intellectual property rights. Use of  
this copyright protection technology must be  
authorized by Macrovision, and is intended for  
home and other limited viewing uses only unless  
otherwise authorized by Macrovision. Reverse  
engineering or disassembly is prohibited.  
Under the U.S. Copyright laws and Copyright  
laws of other countries, unauthorized recording,  
use, display, distribution, or revision of television  
programs, videotapes, BD-ROM discs, DVDs, CDs  
and other materials may subject you to civil and/  
or criminal liability.  
BD561-N-BCANLLK-ENG.indd  
4
2010.1.22 8:31:28 PM  
Safety Information  
5
13. Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
Important Safety  
Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture,  
does not operate normally, or has been dropped.  
1
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has  
two blades with one wider than the other. A  
grounding type plug has two blades and a third  
grounding prong. The wide blade or the third  
prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
11. Only use attachments/accessories specified by  
the manufacturer.  
12. Use only with the cart, stand, tripod, bracket,  
or table specified by the  
manufacturer, or sold with the  
apparatus. When a cart is used,  
use caution when moving the  
cart/apparatus combination to  
avoid injury from tip-over.  
BD561-N-BCANLLK-ENG.indd  
5
2010.1.22 8:31:28 PM  
6
Contents  
3
Installation  
14  
14  
15  
16  
Connecting to Your TV  
HDMI Connection  
What is SIMPLINK?  
1
Component Video  
Connection  
Safety Information  
16  
Video/Audio (Left/Right)  
Connection  
3
Cautions and Warnings  
17  
18  
18  
Resolution Setting  
Connecting to an Amplifier  
2
Connecting to an Amplifier  
via HDMI Output  
Preparation  
8
Introduction  
19  
19  
Connecting to an Amplifier  
via Digital Audio Output  
8
About the “ ” Symbol  
Display  
Connecting to an Amplifier  
via 2 Channel Audio Output  
8
Symbols Used in this  
Manual  
20  
20  
21  
Connecting to your Home Network  
Wired network connection  
Wired Network Setup  
8
Supplied Accesorries  
Playable Discs  
9
10  
11  
11  
File compatibility  
Regional Code  
23  
23  
USB device connection  
Playback content in the  
USB device  
AVCHD (Advanced Video  
Codec High Definition)  
24  
24  
25  
26  
27  
28  
29  
30  
Settings  
11  
Certain System  
Requirements  
Adjust the Setup Settings  
[DISPLAY] Menu  
[LANGUAGE] Menu  
[AUDIO] Menu  
11  
Compatibility Notes  
12  
13  
13  
Remote control  
Front panel  
Rear panel  
[LOCK] Menu  
[NETWORK] Menu  
[OTHERS] Menu  
BD561-N-BCANLLK-ENG.indd  
6
2010.1.22 8:31:28 PM  
7
4
7
Operation  
Appendix  
31  
General Playback  
61  
Controlling a TV with the Supplied  
Remote Control  
1
33  
37  
40  
41  
Advanced Playback  
On-Screen display  
62  
64  
65  
66  
68  
70  
71  
Network Software Update  
Area Code List  
Enjoying BD-LIVE  
Language code List  
Trademarks and Licenses  
Audio Output Specifications  
Video Output Resolution  
Specifications  
Playing a movie file and VR disc  
Viewing a photo  
2
3
4
5
6
7
42  
44  
Listening to music during a  
slide show  
45  
45  
47  
Listening to music  
Audio CD Recording  
72  
Important Information Relating to  
Network Services  
Viewing information from  
Gracenote Media Database  
73  
Open source software notice  
48  
Using the NetCast™ Entertainment  
Access  
48  
52  
Playing YouTube™ videos  
Viewing Picasa™ Web  
Albums  
55  
Using the AccuWeather  
5
Maintenance  
57  
57  
Notes on Discs  
Handling the Unit  
6
Troubleshooting  
58  
59  
59  
60  
General  
Picture  
Sound  
Network  
BD561-N-BCANLLK-ENG.indd  
7
2010.1.22 8:31:28 PM  
8
Preparation  
2
Preparation  
Music files contained in  
the USB/Disc  
2 Introduction  
MUSIC  
PHOTO  
Photo files  
About the “ ” Symbol Display  
may appear on your TV display during  
Supplied Accesorries  
operation and indicates that the function  
explained in this owner’s manual is not  
available on that specific media.  
Symbols Used in this Manual  
Video cable (1)  
Audio cables (1)  
NOTE  
Indicates special notes and operating features.  
CAUTION  
Remote control (1)  
Batteries (2)  
Indicates cautions for preventing possible  
damages from abuse.  
A section whose title has one of the following  
symbols are applicable only to the disc  
represented by the symbol.  
BD  
BD-ROM disc  
DVD-Video, DVD R/RW in  
Video mode or VR mode  
and finalized  
DVD  
DVD R/RW in AVCHD  
format  
AVCHD  
ACD  
Audio CDs  
Movie files contained in  
the USB/Disc  
MOVIE  
BD561-N-BCANLLK-ENG.indd  
8
2010.1.22 8:31:29 PM  
Preparation  
9
Playable Discs  
NOTE  
Blu-ray Disc  
Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD R/RW)  
disc itself, some CD-R/RW (or DVD R/RW) discs  
cannot be played on the unit.  
-
Discs such as movies that can  
be purchased or rented.  
BD-R/RE discs that contain  
Movie, Music or Photo files.  
-
Depending on the recording software & the  
finalization, some recorded discs (CD-R/RW,  
DVD R/RW or BD-R/RE) may not be playable.  
DVD-VIDEO (8 cm / 12 cm disc)  
Discs such as movies that can be  
purchased or rented.  
2
BD-R/RE, DVD R/RW and CD-R/RW discs  
recorded using a personal computer or a DVD or  
CD Recorder may not play if the disc is damaged  
or dirty, or if there is dirt or condensation on the  
player’s lens.  
DVD R (8 cm / 12 cm disc)  
-
-
Video mode and finalized only  
Supports the dual layer disc  
also  
Finalized AVCHD format  
DVD R discs that contain  
Movie, Music or Photo files.  
If you record a disc using a personal computer,  
even if it is recorded in a compatible format,  
there are cases in which it may not play because  
of the settings of the application software used  
to create the disc. (Check with the software  
publisher for more detailed information.)  
-
-
DVD-RW (8 cm / 12 cm disc)  
-
VR mode, Video mode and  
finalized only  
Finalized AVCHD format  
DVD-RW discs that contain  
Movie, Music or Photo files.  
This player requires discs and recordings to meet  
certain technical standards in order to achieve  
optimal playback quality.  
-
-
Pre-recorded DVDs are automatically set to  
these standards. There are many different  
types of recordable disc formats (including  
CD-R containing MP3 or WMA files) and these  
require certain pre-existing conditions to ensure  
compatible playback.  
DVD+RW (8 cm / 12 cm disc)  
-
-
-
Video mode and finalized only  
Finalized AVCHD format  
DVD+RW discs that contain  
Movie, Music or Photo files.  
Hybrid disc have both BD-ROM and DVD (or CD)  
layers on one side. On such discs, BD-ROM layer  
will be only played back in this player.  
Audio CD (8 cm / 12 cm disc)  
Customers should note that permission is  
required in order to download MP3 / WMA files  
and music from the Internet. Our company has  
no right to grant such permission. Permission  
should always be sought from the copyright  
owner.  
CD-R/RW (8 cm / 12 cm disc)  
CD-R/RW discs that contain audio  
titles, Movie, Music or Photo files.  
You have to set the disc format option to  
[Mastered] in order to make the discs compatible  
with the LG players when formatting rewritable  
discs. When setting the option to Live System,  
you cannot use it on LG player. (Mastered/Live  
File System : Disc format system for windows  
Vista)  
BD561-N-BCANLLK-ENG.indd  
9
2010.1.22 8:31:30 PM  
10  
Preparation  
File compatibility  
NOTE  
HD movie files contained on the CD or USB  
1.0/1.1 may not played properly. BD, DVD or USB  
2.0 are recommended to play back HD movie  
files.  
Overall  
Available File extensions: .jpg, “.jpeg, “.png, “  
.avi, “.divx, “.mpg, “.mpeg, “.mkv, “.mp4, “.mp3,  
.wma, “.wav”  
This player support H.264/MPEG-4 AVC profile  
Main, High at Level 4.1. For a file with higher  
level, the warning message will appear on the  
screen.  
Some wav files are not supported on this  
player.  
2
The file name is limited to 180 characters.  
This player does not support the file that are  
Depending on the size and number of the  
files, it may take several minutes to read the  
contents on the media.  
recorded with GMC 1 or Qpel 2. Those are video  
*
*
encoding techniques in MPEG4 standard, like  
DivX or XVID have.  
Maximum Files/Folder: Less than 2000 (total  
number of files and folders)  
CD-R/RW, DVD R/RW, BD-R/RE Format:  
ISO 9660+JOLIET, UDF and UDF Bridge format  
*1 GMC – Global Motion Compensation  
*2 Qpel – Quarter pixel  
MUSIC  
MOVIE  
Sampling frequency: within 8 - 48 kHz  
(WMA), within 11 - 48 kHz (MP3)  
Bit rate: within 8 - 320 kbps (WMA, MP3)  
Available resolution size: 1920 x 1080 (W x H)  
pixels  
Playable subtitle: SubRip (.srt / .txt), SAMI  
(.smi), SubStation Alpha (.ssa/.txt), MicroDVD  
(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),  
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD  
Subtitle System (.txt)  
Playable Codec format: “DIVX3.xx”, “DIVX4.  
xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard  
playback only), H.264/MPEG-4 AVC, MPEG1 SS,  
MPEG2 PS, MPEG2 TS  
NOTE  
This unit cannot support the ID3 Tag embedded  
MP3 file.  
The total playback time indicated on the screen  
may not be correct for VBR files.  
Playable Audio format: “Dolby Digital”, “DTS”,  
“MP3”, “WMA”, “AAC”, “AC3”  
PHOTO  
Recommended size:  
Less than 4,000 x 3,000 x 24 bit/pixel  
Less than 3,000 x 3,000 x 32 bit/pixel  
Not all the WMA and AAC Audio format are  
compatible with this unit.  
Sampling frequency: within 32-48 kHz  
(WMA), within 16-48 kHz (MP3)  
Bit rate: within 20-320Kbps (WMA), within  
32-320Kbps (MP3)  
Progressive and lossless compression photo  
image files are not supported.  
BD561-N-BCANLLK-ENG.indd 10  
2010.1.22 8:31:30 PM  
Preparation  
11  
For Dolby® Digital Plus, Dolby TrueHD and DTS-  
HD multi-channel audio playback:  
Regional Code  
This unit has a regional code printed on the  
rear of the unit. This unit can play only BD-ROM  
or DVD discs labeled same as the rear of the  
unit orALL”.  
An amplifier/receiver with a built-in (Dolby  
Digital, Dolby Digital Plus, Dolby TrueHD,  
DTS or DTS-HD) decoder.  
Main, centre, surround speakers and  
subwoofer as necessary for chosen format.  
AVCHD (Advanced Video Codec  
High Definition)  
2
Compatibility Notes  
This player can playback AVCHD format  
discs. These discs are normally recorded and  
used in camcorders.  
Because BD-ROM is a new format,  
certain disc, digital connection and other  
compatibility issues are possible. If you  
experience compatibility problems, please  
contact an authorized Customer Service  
Centre.  
The AVCHD format is a high definition  
digital video camera format.  
The MPEG-4 AVC/H.264 format is capable  
of compressing images at higher efficiency  
than that of the conventional image  
compressing format.  
Viewing high-definition content and up-  
converting standard DVD content may  
require a HDMI-capable input or HDCP-  
capable DVI input on your display device.  
Some AVCHD discs use thex.v.Color”  
format.  
Some BD-ROM and DVD discs may restrict  
the use of some operation commands or  
features.  
This player can playback AVCHD discs using  
“x.v.Colorformat.  
Dolby TrueHD, Dolby Digital Plus and DTS-  
HD are supported with maximum 7.1  
channels if you use HDMI connection for  
the audio output of the unit.  
Some AVCHD format discs may not play  
depending on the recording condition.  
AVCHD format discs need to be finalized.  
“x.v.Coloroffers a wider colour range than  
normal DVD camcorder discs.  
You can use a USB device that is used  
to store some disc related information,  
including downloaded on-line content. The  
disc you are using will control how long this  
information is retained.  
Certain System Requirements  
For high definition video playback:  
High definition display that has  
COMPONENT or HDMI input jacks.  
BD-ROM disc with high definition content.  
HDMI or HDCP capable DVI input on your  
display device is required for some content  
(as specified by disc authors).  
For up-conversion of standard definition  
DVD, a HDMI or HDCP capable DVI input  
on your display device is required for copy  
protected content.  
BD561-N-BCANLLK-ENG.indd 11  
2010.1.22 8:31:31 PM  
12  
Preparation  
Remote control  
• • • • • •  
• • • • • •  
ENTER ( ): Acknowledges  
a
menu selection.  
(POWER): Switches the  
player ON or OFF.  
1
RETURN ( ): Exits the menu  
O
or resumes playback. The  
resume play function may not  
work depending on the BD-  
ROM disc.  
Z
(OPEN/CLOSE): Opens and  
closes the disc tray.  
2
0-9 numerical buttons:  
Selects numbered options in  
a menu or inputs letters in the  
keypad menu.  
TITLE/POPUP: Displays the  
DVD title menu or BD-ROM’s  
pop-up menu, if available.  
CLEAR: Removes a mark on  
the search menu or a number  
when setting the password.  
DISC MENU: Accesses the  
menu on a disc.  
• • • • • •  
• • • • • •  
d
REPEAT: Repeats a desired  
section or sequence.  
Coloured (R, G, Y, B) buttons:  
Use to navigate BD-ROM  
menus. They are also used for  
[MOVIE], [PHOTO], [MUSIC] and  
[NetCast] menu.  
• • • • • •  
• • • • • •  
b
m M  
/
(SCAN): Searches  
backward or forward.  
MARKER: Marks any point  
during playback.  
. >  
/
next or previous chapter / track  
/ file.  
(SKIP): Goes to the  
SEARCH: Displays or exits the  
search menu.  
x
(STOP): Stops playback.  
ZOOM: Displays or exits the  
[Zoom] menu.  
N
(PLAY): Starts playback.  
X
(PAUSE): Pauses playback.  
Battery Installation  
TV Control Buttons: See page  
61.  
• • • • • •  
• • • • • •  
c
HOME ( ): Displays or exits  
the [Home Menu].  
MUSIC ID: When connected  
to the network, can provide  
information about the current  
song during movie playback.  
Remove the battery cover  
on the rear of the Remote  
Control, and insert two R03  
(size AAA) batteries with  
and matched correctly.  
INFO/DISPLAY ( ): Displays or  
exits On-Screen Display.  
Direction buttons: Selects an  
option in the menu.  
BD561-N-BCANLLK-ENG.indd 12  
2010.1.22 8:31:31 PM  
Preparation  
13  
Front panel  
2
Disc Tray  
N X  
/
(PLAY / PAUSE)  
a
f
g
h
i
Z
(OPEN/CLOSE)  
x
(STOP)  
b
1
(POWER) Button  
. >  
/
(SKIP)  
c
Display Window  
USB Port  
d
Remote Sensor  
e
Rear panel  
AC power cord  
LAN port  
a
b
c
d
e
f
g
DIGITAL AUDIO OUT (COAXIAL)  
VIDEO OUT  
HDMI OUT (Type A, Version 1.3)  
COMPONENT VIDEO OUT (Y PB PR)  
2CH AUDIO OUT (Left/Right)  
BD561-N-BCANLLK-ENG.indd 13  
2010.1.22 8:31:32 PM  
14  
Installation  
3
Installation  
HDMI Connection  
Connecting to Your TV  
If you have a HDMI TV or monitor, you can  
connect it to this player using a HDMI cable  
(Type A, Version 1.3). Connect the HDMI jack  
on the player to the HDMI jack on a HDMI  
compatible TV or monitor.  
Make one of the following connections,  
depending on the capabilities of your existing  
equipment.  
3
HDMI connection (page 14-15)  
HDMI Connection  
Component Video connection (page 16)  
Video/Audio (Left/Right) Connection (page  
16)  
BD Player  
NOTE  
Depending on your TV and other equipment  
you wish to connect, there are various ways you  
could connect the player. Use only one of the  
connections described in this manual.  
Please refer to the manuals of your TV, Stereo  
System or other devices as necessary to make  
the best connections.  
TV  
HDMI  
Cable  
Do not connect the player’s AUDIO OUT jack to  
the phono in jack (record player) of your audio  
system.  
Do not connect your player via your VCR. The  
image could be distorted by the copy protection  
system.  
Set the TV’s source to HDMI (refer to TV’s  
Owner’s manual).  
BD561-N-BCANLLK-ENG.indd 14  
2010.1.22 8:31:32 PM  
Installation  
15  
What is SIMPLINK?  
NOTE  
If a connected HDMI device does not accept  
the audio output of the player, the HDMI device  
’s audio sound may be distorted or may not  
output.  
Some functions of this unit are controlled by  
the TV’s remote control when this unit and LG  
TVs with SIMPLINK are connected through  
HDMI connection.  
When you use HDMI connection, you can  
change the resolution for the HDMI output.  
(Refer to “Resolution Settingon page 17.)  
Controllable functions by LG TV’s remote  
control; Play, Pause, Scan, Skip, Stop, Power Off,  
etc.  
Select the type of video output from the HDMI  
OUT jack using [HDMI Color Setting] option on  
the [Setup] menu (see page 26).  
Changing the resolution when the connection  
has already been established may result in  
malfunctions. To solve the problem, turn off the  
player and then turn it on again.  
Refer to the TV owner’s manual for the details  
of SIMPLINK function.  
3
LG TV’s with SIMPLINK function has the logo as  
shown above.  
When the HDMI connection with HDCP is not  
verified, TV screen is changed to black screen.  
In this case, check the HDMI connection, or  
disconnect the HDMI cable.  
NOTE  
If there are noises or lines on the screen, please  
check the HDMI cable (length is generally  
limited to 4.5m).  
Depending on the disc type or playing status,  
some SIMPLINK operation may differ from your  
purpose or not work.  
Additional Information for HDMI  
When you connect a HDMI or DVI  
compatible device make sure of the  
following:  
-
Try switching off the HDMI/DVI device  
and this player. Next, switch on the  
HDMI/DVI device and leave it for around  
30 seconds, then switch on this player.  
The connected device’s video input is set  
correctly for this unit.  
The connected device is compatible with  
720x480p, 1280x720p, 1920x1080i or  
1920x1080p video input.  
-
-
Not all HDCP-compatible HDMI or DVI  
devices will work with this player.  
The picture will not be displayed properly  
with non-HDCP device.  
This player does not playback and TV  
screen is changed to black screen.  
-
-
BD561-N-BCANLLK-ENG.indd 15  
2010.1.22 8:31:33 PM  
16  
Installation  
Component Video Connection  
Video/Audio (Left/Right)  
Connection  
Connect the COMPONENT VIDEO OUT jacks on  
the player to the corresponding input jacks on  
the TV using component video cable. Connect  
the left and right AUDIO OUT jacks of the  
player to the audio left and right IN jacks on  
the TV using the audio cables.  
Connect the VIDEO OUT jack on the player to  
the video in jack on the TV using a video cable.  
Connect the left and right AUDIO OUT jacks of  
the player to the audio left and right IN jacks  
on the TV using the audio cables.  
Component Connection  
Video/Audio Connection  
BD Player  
BD Player  
3
Audio  
cable  
Component  
video cable  
Video cable  
Audio  
cable  
TV  
TV  
NOTE  
When you use COMPONENT VIDEO OUT  
connection, you can change the resolution for the  
output. (Refer toResolution settingon page 17.)  
BD561-N-BCANLLK-ENG.indd 16  
2010.1.22 8:31:33 PM  
Installation  
17  
Resolution Setting  
NOTE  
The player provides several output resolutions  
for HDMI OUT and COMPONENT VIDEO OUT  
jacks. You can change the resolution using  
[Setup] menu.  
If your TV does not accept the resolution you  
have set on the player, you can set resolution to  
480p as follows:  
1. Press to open the disc tray.  
Z
1. Press HOME ( ).  
2
Press (STOP) for more than 5 seconds.  
x
I i  
/ to select the [Setup] and press  
2. Use  
Since several factors affect the resolution of  
video output, seeVideo Output Resolutionon  
page 70.  
ENTER ( ). The [Setup] menu appears.  
3
U u  
to select [DISPLAY] option then  
press to move to the second level.  
3. Use  
/
i
U u  
/ to select the [Resolution] option  
4. Use  
then press ENTER ( ) to move to the third  
level.  
U u  
/ to select the desired resolution  
5. Use  
then press ENTER ( ) to confirm your  
selection.  
BD561-N-BCANLLK-ENG.indd 17  
2010.1.22 8:31:34 PM  
18  
Installation  
Connecting to an Amplifier via  
HDMI Output  
Connecting to an  
Amplifier  
Connect the player’s HDMI OUT jack to the  
corresponding in jack on your amplifier using  
a HDMI cable. You will need to activate the  
player’s digital output. (See[AUDIO] Menuon  
pages 27-28.)  
Make one of the following connections,  
depending on the capabilities of your existing  
equipment.  
HDMI Connection  
HDMI Audio connection (page 18)  
Digital Audio connection (page 19)  
2CH Analog Audio connection (page 19)  
BD Player  
Since many factors affect the type of audio  
output, seeAudio Output Specificationsfor  
details (pages 68-69).  
3
About Digital Multi-channel sound  
A digital multi-channel connection provides  
the best sound quality. For this, you need  
a multi-channel Audio/Video Receiver that  
supports one or more of the audio formats  
supported by your player. Check the receiver  
manual and the logos on the front of the  
receiver. (PCM Stereo, PCM Multi-Ch, Dolby  
Digital, Dolby Digital Plus, Dolby TrueHD, DTS  
and/or DTS-HD)  
HDMI cable  
Receiver/Amplifier  
HDMI cable  
TV  
Connect the amplifier’s HDMI output jack to  
HDMI input jack on your TV using a HDMI cable  
if your amplifier has HDMI output jack.  
BD561-N-BCANLLK-ENG.indd 18  
2010.1.22 8:31:34 PM  
Installation  
19  
Connecting to an Amplifier via  
Digital Audio Output  
Connecting to an Amplifier via  
2 Channel Audio Output  
Connect the player’s DIGITAL AUDIO OUT jack  
to the corresponding in jack (COAXIAL) on your  
amplifier. Use an optional digital audio cable.  
You will need to activate the player’s digital  
output. (See[AUDIO] Menuon pages 27-28.)  
Connect the Left and Right 2CH AUDIO OUT  
jacks on the player to the audio left and right  
in jacks on your amplifier, receiver, or stereo  
system using audio cables.  
2CH Analog Audio Connection  
Digital Audio Connection  
BD Player  
BD Player  
3
Coaxial  
cable  
Audio cable  
Receiver/Amplifier  
Receiver/Amplifier  
BD561-N-BCANLLK-ENG.indd 19  
2010.1.22 8:31:34 PM  
20  
Installation  
Connecting to your  
Home Network  
Wired Network Connection  
Router/Modem  
This player can be connected to a local area  
network (LAN) via the LAN port on the rear  
panel.  
By connecting the unit to a broadband home  
network, you have access to services such as  
software updates, BD-LIVE interactivity and  
on-line services.  
Broadband  
service  
PC  
PC  
3
Wired network connection  
Connect the player’s LAN port to the  
corresponding port on your Modem or Router  
using a commercially available LAN or Ethernet  
cable (CAT5 or better with RJ45 connector).  
NOTE  
LAN cable  
When plugging or unplugging the LAN cable,  
hold the plug portion of the cable. When  
unplugging, do not pull on the LAN cable but  
unplug while pressing down on the lock.  
Do not connect a modular phone cable to the  
LAN port.  
Since there are various connection  
configurations, please follow the specifications  
of your telecommunication carrier or internet  
service provider.  
BD Player  
BD561-N-BCANLLK-ENG.indd 20  
2010.1.22 8:31:35 PM  
Installation  
21  
Wired Network Setup  
NOTE  
If there is a DHCP server on the local area  
network (LAN) via wired connection, this player  
will automatically be allocated an IP address.  
After making the physical connection, a small  
number of home networks may require the  
player’s network setting to be adjusted. Adjust  
the [NETWORK] setting as follow.  
If there is no DHCP server on the network and you  
want to set the IP address manually, select [Static]  
then set [IP Address], [Subnet Mask], [Gateway]  
and [DNS Server] using  
buttons. If you make a mistake while entering a  
number, press CLEAR to clear the highlighted part.  
U u I i  
and numerical  
/
/
/
3. Select [OK] and press ENTER ( ) to apply  
network settings.  
Preparation  
4. The player will ask you to test the network  
Before setting the wired network, you need to  
connect the broadband internet to your home  
network.  
connection. Select [OK] and press ENTER  
(
) to complete the network connection.  
3
5. If you select [Test] and press ENTER  
1. Select [Connection Setting] option in the  
(
) at step 4 above, the network  
[Setup] menu then press ENTER ( ).  
connection status is displayed on the  
screen.  
You can also test it on the [Connection  
Status] in the [Setup] menu.  
U u I i  
to select the IP mode  
2. Use  
/
/
/
between [Dynamic] and [Static].  
Normally, select [Dynamic] to allocate an IP  
address automatically.  
BD561-N-BCANLLK-ENG.indd 21  
2010.1.22 8:31:35 PM  
22  
Installation  
Any fees charged by an ISP including,  
without limitation, connection charges are  
your responsibility.  
Notes on Network Connection:  
Many network connection problems during  
set up can often be fixed by re-setting the  
router or modem. After connecting the  
player to the home network, quickly power  
off and/or disconnect the power cable of  
the home network router or cable modem.  
Then power on and/or connect the power  
cable again.  
A 10 Base-T or 100 Base-TX LAN port is  
required for wired connection to this player.  
If your internet service does not allow for  
such a connection, you will not be able to  
connect the player.  
You must use a Router to use xDSL service.  
Depending on the internet service provider  
(ISP), the number of devices that can  
receive internet service may be limited by  
the applicable terms of service. For details,  
contact your ISP.  
A DSL modem is required to use DSL service  
and a cable modem is required to use cable  
modem service. Depending on the access  
method of and subscriber agreement with  
your ISP, you may not be able to use the  
internet connection feature contained in  
this player or you may be limited to the  
number of devices you can connect at the  
same time. (If your ISP limits subscription  
to one device, this player may not be  
allowed to connect when a PC is already  
connected.)  
3
Our company is not responsible for  
any malfunction of the player and/or  
the internet connection feature due to  
communication errors/malfunctions  
associated with your broadband internet  
connection, or other connected equipment.  
The features of BD-ROM discs made  
available through the Internet Connection  
feature are not created or provided  
by our company, and our company is  
not responsible for their functionality  
or continued availability. Some disc  
related material available by the Internet  
Connection may not be compatible with  
this player. If you have questions about such  
content, please contact the producer of the  
disc.  
The use of aRoutermay not be allowed  
or its usage may be limited depending on  
the policies and restrictions of your ISP. For  
details, contact your ISP directly.  
Some internet contents may require a  
higher bandwidth connection.  
Even if the player is properly connected and  
configured, some internet contents may  
not operate properly because of internet  
congestion, the quality or bandwidth of  
your internet service, or problems at the  
provider of the content.  
Some internet connection operations may  
not be possible due to certain restrictions  
set by the Internet service provider (ISP)  
supplying your broadband Internet  
connection.  
BD561-N-BCANLLK-ENG.indd 22  
2010.1.22 8:31:36 PM  
Installation  
23  
3. Select [Movie], [Photo] or [Music] using  
I i  
USB device  
connection  
/
, and press ENTER ( ).  
This player can play movie, music and photo  
files contained in the USB device.  
I i  
/ , and  
4. Select the [USB] option using  
Playback content in the USB  
device  
press ENTER ( ).  
1. Insert a USB device to the USB port until it  
3
fits into place.  
USB device connection  
U u I i  
, and press PLAY  
5. Select a file using  
/
/
/
or ENTER ( ) to play the file.  
When you connect the USB device on the  
HOME menu, the player plays a music fi  
le contained in the USB storage device  
automatically. If the USB storage device is  
containing various types of files, a menu for  
the file type selection will appear.  
6. Withdraw the USB device carefully.  
File loading may takes few minutes depending  
on the number of content stored in the USB  
storage device. Press ENTER ( ) while [Cancel]  
is selected to stop loading.  
2. Press HOME ( ).  
BD561-N-BCANLLK-ENG.indd 23  
2010.1.22 8:31:36 PM  
24  
Installation  
Settings  
NOTE  
This player supports USB flash memory/external  
HDD formatted in FAT16, FAT32 and NTFS when  
accessing files (music, photo, movie). However,  
for BD-LIVE and Audio CD recording, only FAT16  
and FAT32 formats are supported. Use the USB  
flash memory/external HDD formatted in either  
FAT16 or FAT32 when using BD-LIVE and Audio  
CD recording.  
Adjust the Setup Settings  
You can change the settings of the player in  
the [Setup] menu.  
1. Press HOME ( ).  
The USB device can be used for the local storage  
for enjoying BD-LIVE discs with Internet.  
This unit can support up to 4 partitions of the  
USB device.  
Do not extract the USB device during operation  
(play, etc.).  
3
A USB device which requires additional program  
installation when you have connected it to a  
computer, is not supported.  
I i  
to select the [Setup] and press  
ENTER ( ). The [Setup] menu appears.  
2. Use  
/
USB device: USB device that supports USB1.1  
and USB2.0.  
Movie, music and photo files can be played.  
For details of operations on each file, refer to  
relevant pages.  
Regular back up is recommended to prevent  
data loss.  
If you use a USB extension cable, USB HUB or  
USB Multi-reader, the USB device may not be  
recognized.  
U u  
to select the first setup option, and  
press to move to the second level.  
3. Use  
/
i
Some USB device may not work with this unit.  
Digital camera and mobile phone are not  
supported.  
USB Port of the unit cannot be connected to PC.  
The unit cannot be used as a storage device.  
BD561-N-BCANLLK-ENG.indd 24  
2010.1.22 8:31:36 PM  
Installation  
25  
U u  
to select a second setup option,  
and press ENTER ( ) to move to the third  
level.  
4. Use  
/
NOTE  
You cannot select [4:3 Letter Box] and [4:3 Pan  
Scan] option when the resolution is set to higher  
than 720p.  
Resolution  
Sets the output resolution of the Component  
and HDMI video signal. Refer to page 17 and  
70 for details about the resolution setting.  
U u  
to select a desired setting, and  
press ENTER ( ) to confirm your selection.  
5. Use  
/
[Auto]  
If the HDMI OUT jack is connected to  
TVs providing display information (EDID),  
automatically selects the resolution  
best suited to the connected TV. If the  
COMPONENT VIDEO OUT is only connected,  
this changes the resolution to 1080i as  
default resolution.  
3
[DISPLAY] Menu  
TV Aspect Ratio  
Select a TV aspect ratio option according to  
your TV type.  
[1080p]  
Outputs 1080 lines of progressive video.  
[4:3 Letter Box]  
[1080i]  
Select when a standard 4:3 TV is connected.  
Displays theatrical images with masking  
bars above and below the picture.  
Outputs 1080 lines of interlaced video.  
[720p]  
Outputs 720 lines of progressive video.  
[4:3 Pan Scan]  
Select when a standard 4:3 TV is connected.  
Displays pictures cropped to fill your TV  
screen. Both sides of the picture are cut off.  
[480p]  
Outputs 480 lines of progressive video.  
[480i]  
[16:9 Original]  
Outputs 480 lines of interlaced video.  
Select when a 16:9 wide TV is connected.  
The 4:3 picture is displayed with an original  
4:3 aspect ratio, with black bars appearing  
at the left and right sides.  
[16:9 Full]  
Select when a 16:9 wide TV is connected.  
The 4:3 picture is adjusted horizontally (in a  
linear proportion) to fill the entire screen.  
BD561-N-BCANLLK-ENG.indd 25  
2010.1.22 8:31:37 PM  
26  
Installation  
1080p Display Mode  
[LANGUAGE] Menu  
When the resolution is set to 1080p, select  
[24Hz] for smooth presentation of film material  
(1080p/24 Hz) with a HDMI-equipped display  
compatible with 1080p/24 Hz input.  
Display Menu  
Select a language for the [Setup] menu and  
on-screen display.  
NOTE  
Disc Menu/Disc Audio/Disc Subtitle  
Select the language you prefer for the audio  
track (disc audio), subtitles, and the disc menu.  
When you select [24 Hz], you may experience  
some picture disturbance when the video  
switches video and film material. In this case,  
select [60 Hz].  
[Original]  
Even when [1080p Display Mode] is set to  
[24 Hz], if your TV is not compatible with  
1080p/24 Hz, the actual frame frequency of the  
video output will be 60 Hz to match the video  
source format.  
Refers to the original language in which the  
disc was recorded.  
3
[Other]  
Press ENTER ( ) to select another language.  
Use number buttons then press ENTER (  
)
to enter the corresponding 4-digit number  
according to the language code list on  
page 65.  
HDMI Color Setting  
Select the type of output from the HDMI  
OUT jack. For this setting, please refer to the  
manuals of your display device.  
[Off] (Disc Subtitle only)  
Turn off Subtitle.  
[YCbCr]  
Select when connecting to a HDMI display  
device.  
NOTE  
[RGB]  
Depending on the disc, your language setting may  
not work.  
Select when connecting to a DVI display  
device.  
BD561-N-BCANLLK-ENG.indd 26  
2010.1.22 8:31:37 PM  
Installation  
27  
[AUDIO] Menu  
NOTE  
Each disc has a variety of audio output options.  
Set the player’s Audio options according to the  
type of audio system you use.  
When [HDMI] option is set to [PCM Multi-Ch],  
the audio may output as PCM Stereo if the PCM  
Multi-Ch information is not detected from HDMI  
device with EDID.  
If the [HDMI] or [Digital Output] option is set to  
[DTS re-encode], the DTS Re-encode audio is  
output for BD-ROM discs with secondary audio  
and the original audio is output for the other  
discs (like [Primary Pass-Thru]).  
NOTE  
Since many factors affect the type of audio output,  
seeAudio Output Specificationson page 68-69 for  
details.  
Sampling Freq.  
(Digital Audio Output)  
HDMI / Digital Output  
3
Select the output sound format when a device  
equipped with a HDMI or Digital Audio input  
jack is connected to the HDMI OUT or DIGITAL  
AUDIO OUT jack on this player.  
[192 kHz]  
Select this if your A/V Receiver or Amplifier  
is capable of handling 192 kHz signals.  
[96 kHz]  
[PCM Stereo]  
Select this if your A/V Receiver or Amplifier  
is not capable of handling 192 kHz signals.  
When this choice is made, this unit  
automatically converts any 192 kHz signals  
to 96 kHz so your system can decode them.  
Select if you connect this unit’s HDMI OUT  
or DIGITAL AUDIO OUT jack to a device with  
two-channel digital stereo decoder.  
[PCM Multi-Ch] (HDMI only)  
Select if you connect this unit’s HDMI OUT  
jack to a device with multi-channel digital  
decoder.  
[48 kHz]  
Select this if your A/V Receiver or Amplifier  
is not capable of handling 192 kHz and  
96 kHz signal. When this choice is made,  
this unit automatically converts any 192 kHz  
and 96 kHz signals to 48 kHz so your system  
can decode them.  
[DTS Re-Encode]  
Select if you connect this unit’s HDMI OUT  
or DIGITAL AUDIO OUT jack to a device with  
DTS decoder.  
[Primary Pass-Thru]  
Check the documentation for your A/V  
Receiver or Amplifier to verify its capabilities.  
Select if you connect this unit’s DIGITAL  
AUDIO OUT and HDMI OUT jack to a device  
with LPCM, Dolby Digital, Dolby Digital Plus,  
Dolby TrueHD, DTS and DTS-HD decoder.  
BD561-N-BCANLLK-ENG.indd 27  
2010.1.22 8:31:37 PM  
28  
Installation  
If you forget your password  
DRC (Dynamic Range Control)  
When a title encoded in Dolby Digital or Dolby  
Digital Plus is playing back, you may wish to  
compress the dynamic range of the audio  
output (the difference between the loudest  
sounds and the quietest ones). This allows you  
to listen to a movie at a lower volume without  
losing clarity of sound. Set [DRC] to [On] for  
this effect.  
If you forget your password, you can clear it  
using the following steps:  
1. Remove any disc that might be in the  
player.  
2. Select [Password] option in the [Setup]  
menu.  
3. Use Number buttons to enter210499. The  
password is cleared.  
NOTE  
The DRC setting can be changed only when a  
disc is not inserted or the unit is in complete stop  
mode.  
NOTE  
3
If you make a mistake before pressing ENTER ( ),  
press CLEAR. Then input the correct password.  
DVD Rating  
Blocks playback of rated DVD based on their  
content. (Not all discs are rated.)  
[LOCK] Menu  
The [LOCK] settings affect only BD and DVD  
playback.  
[Rating 1-8]  
Rating one (1) has the most restrictions and  
rating eight (8) is the least restrictive.  
To access the any features in [LOCK] settings,  
you must enter the 4-digit security code you  
have created.  
If you have not entered a password yet, you are  
prompted to do so. Enter a 4-digit password  
twice, and press ENTER ( ) to create a new  
password.  
[Unlock]  
If you select [Unlock], parental control is not  
active and the disc plays in full.  
BD Rating  
Password  
You can create, or change the password.  
Sets an age limit for BD-ROM playback. Use  
number buttons to input an age limit for BD-  
ROM viewing.  
[None]  
Enter a 4-digit password twice, and press  
ENTER ( ) to create a new password.  
[255]  
All BD-ROM can be played.  
[Change]  
[0-254]  
Enter the current password and press ENTER  
Prohibits play of BD-ROM with  
corresponding ratings recorded on them.  
(
). Enter a 4-digit password twice, and  
press ENTER ( ) to create a new password.  
BD561-N-BCANLLK-ENG.indd 28  
2010.1.22 8:31:38 PM  
Installation  
29  
[NETWORK] Menu  
NOTE  
The [BD rating] will be applied only for the BD disc  
that containing the Advanced Rating Control.  
The [NETWORK] settings are needed to use the  
software update, BD Live and on-line features.  
Area Code  
Connection Setting  
Enter the code of the area whose standards  
were used to rate the DVD video disc, based  
on the list on page 64.  
If your home network environment is ready to  
connect to the player, the player needs to be  
set up for network communication.  
(SeeConnecting to your Home Networkon  
pages 20-22.)  
Connection Status  
3
If you want to check the network status on  
this player, select the [Connection Status]  
options and press ENTER ( ) to check whether  
a connection to the network and the internet  
have been established.  
BD-LIVE connection  
You can restrict Internet access when BD-LIVE  
functions are used.  
[Permitted]  
Internet access is permitted for all BD-LIVE  
contents.  
[Partially permitted]  
Internet access is permitted only for BD-  
LIVE contents which have content owner  
certificates. Internet access and AACS  
Online functions are prohibited for all BD-  
LIVE contents without a certificate.  
[Prohibited]  
Internet access is prohibited for all BD-LIVE  
contents.  
BD561-N-BCANLLK-ENG.indd 29  
2010.1.22 8:31:38 PM  
30  
Installation  
Auto Power Off  
[OTHERS] Menu  
The screen saver appears when you leave  
the player in Stop mode for about five  
minutes. If you set this option to [On], the unit  
automatically turns itself off after the Screen  
Saver is displayed for 25 minutes.  
DivX VOD  
ABOUT DIVX VIDEO: DivX® is a digital video  
format created by DivX, Inc. This is an official  
DivX Certified device that plays DivX video.  
software tools to convert your files into DivX  
video.  
Set this option to [O] to leave the screen  
saver until the unit is operated by the user.  
Initialize  
Factory Set  
You can reset the player to its original  
factory settings.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX  
Certified® device must be registered in order to  
play DivX Video-on-Demand (VOD) content.  
To generate the registration code, locate the  
DivX VOD section in the device setup menu.  
Go to vod.divx.com with this code to complete  
the registration process and learn more about  
DivX VOD.  
3
BD Storage Clear  
Initializes the BD contents from the  
connected USB storage.  
[Register]  
NOTE  
Displays the registration code of your player.  
If you reset the player to its original factory settings  
using [Factory Set] option, you have to set the  
network settings again.  
[Deregister]  
Deactivate your player and display the  
deactivation code.  
Software  
Information  
Displays the current software version.  
NOTE  
All the downloaded videos from DivX VOD with  
this player’s registration code can only be played  
back on this unit.  
Update  
You can update the software by connecting  
the unit directly to the software update  
server (see page 62-63).  
Disclaimer Notice  
Press ENTER ( ) to view the notice of Network  
Service Disclaimer on page 72.  
BD561-N-BCANLLK-ENG.indd 30  
2010.1.22 8:31:38 PM  
Operation  
31  
4
Operation  
I i  
/ , and  
5. Select the [Disc] option using  
General Playback  
press ENTER ( ).  
Playing Discs  
1. Press (OPEN/CLOSE), and place a disc on  
Z
the disc tray.  
Insert a disc  
This step is needed only when a disc and a  
USB device are connected simultaneously  
in this unit.  
4
U u I i  
, and press  
6. Select a file using  
/
/
/
B
(PLAY) or ENTER ( ) to play the file.  
NOTE  
Playback functions described in this manual are  
not always available in every files and media.  
Some functions can be restricted depending on  
many factors.  
2. Press (OPEN/CLOSE) to close the disc  
Z
tray.  
Depending on the BD-ROM titles, a USB device  
connection may be needed for the proper  
playback.  
For the most Audio CD, BD-ROM and  
DVD-ROM discs, playback starts  
automatically.  
3. Press HOME ( ).  
4. Select [Movie], [Photo] or [Music] using  
I i  
/
, and press ENTER ( ).  
BD561-N-BCANLLK-ENG.indd 31  
2010.1.22 8:31:39 PM  
32  
Operation  
To stop playback  
Using the disc menu  
Press (STOP) during playback.  
x
BD  
DVD  
AVCHD  
To pause playback  
To display the disc menu  
Press (PAUSE) during playback.  
X
The menu screen may be displayed first after  
loading a disc which contains a menu. If you  
want to display the disc menu during playback,  
press DISC MENU.  
Press (PLAY) to resume playback.  
B
To play frame-by-frame  
Press (PAUSE) while movie playback.  
X
U u I i  
buttons to navigate through  
menu items.  
Use  
/
/
/
Press (PAUSE) repeatedly to play Frame-by-  
X
Frame playback.  
To display the Pop-up menu  
Some BD-ROM discs contain a Pop-up menu  
that appears during playback.  
To scan forward or backward  
Press  
or  
to play fast forward or fast  
m
M
reverse during playback.  
You can change the various playback speeds  
Press TITLE/POPUP during playback, and use  
U u I i  
buttons to navigate through menu  
/
/
/
by pressing  
or  
repeatedly.  
m
M
items.  
4
To slow down the playing speed  
While the playback is paused, press  
M
repeatedly to play various speeds of slow  
motion.  
To skip to the next/previous  
chapter/track/file  
During playback, press  
or  
to go to  
.
>
the next chapter/track/file or to return to the  
beginning of the current chapter/track/file.  
Press  
twice briefly to step back to the  
.
previous chapter/track/file.  
BD561-N-BCANLLK-ENG.indd 32  
2010.1.22 8:31:40 PM  
Operation  
33  
Resume playback  
Advanced Playback  
BD  
DVD  
AVCHD MOVIE ACD  
MUSIC  
The unit records the point where you pressed  
the (STOP) depending on the disc.  
Repeat Playback  
x
BD  
DVD  
AVCHD  
ACD MUSIC  
If“  
Xx  
(Resume Stop)appears on the screen  
briefly, press (PLAY) to resume playback  
(from the scene point).  
B
During playback, press REPEAT repeatedly to  
select a desired repeat mode.  
If you press (STOP) twice or unload the disc,  
x
(Complete Stop)appears on the screen.  
x
BDs/DVDs  
A- – Selected portion will be repeated  
continually.  
The unit will clear the stopped point.  
– The current chapter will be  
Chapter  
played back repeatedly.  
NOTE  
– The current title will be played  
back repeatedly.  
Title  
The resume point may be cleared when a  
button is pressed (for example; (POWER),  
1
(OPEN/CLOSE), etc).  
Z
To return to normal playback, press REPEAT  
repeatedly to select [O].  
On BD-Video discs with BD-J, the resume  
playback function does not work.  
4
If you press (STOP) once during BD-ROM  
interactive title playback, the unit will be in  
Complete Stop mode .  
x
Audio CDs/Music files  
– The current track or file will be  
Track  
played back repeatedly.  
– All the tracks or files will be played  
back repeatedly.  
All  
– The tracks or files will be played back  
in random order.  
– All the tracks or files will be  
All  
played back repeatedly in random order.  
– Selected portion will be repeated  
A-B  
continually. (Audio CD only)  
To return to normal playback, press CLEAR.  
BD561-N-BCANLLK-ENG.indd 33  
2010.1.22 8:31:40 PM  
34  
Operation  
Enlarge the playback image  
NOTE  
BD  
DVD  
AVCHD MOVIE PHOTO  
If you press  
Track playback, the repeat playback cancels.  
once during Repeat Chapter/  
>
1. During playback or pause mode, press  
ZOOM to display the [Zoom] menu.  
This function may not work on some disc or title.  
2. Use red (R) or green (G) colored button to  
zoom out or in the picture.  
You can move through the zoomed picture  
U u I i  
buttons.  
using  
/
/
/
Repeating a specific portion  
BD  
DVD  
AVCHD  
ACD  
3. To return to the normal picture size, press  
yellow (Y) colored button.  
This player can repeat a portion you have  
selected.  
4. Press RETURN (O) to exit the [Zoom]  
menu.  
1. During playback, press REPEAT to select [A-]  
at the beginning of the portion you wish to  
repeat.  
Marker Search  
BD  
2. Press ENTER ( ) at the end of the portion.  
Your selected portion will be repeated  
continually.  
DVD  
AVCHD MOVIE  
4
You can start playback from up to nine  
memorized points.  
3. To return to normal playback, press REPEAT  
repeatedly to select [O].  
To enter a marker  
1. During playback, press MARKER at the  
desired point. The Marker icon appears on  
the TV screen briefly.  
NOTE  
You cannot select a portion less than 3 seconds.  
This function may not work on some disc or title.  
2. Repeat step 1 to add up to nine markers.  
To recall a marked scene  
1. Press SEARCH and the search menu appears  
on the screen.  
2. Press a number button to select a marker  
number that you want to recall. Playback  
starts from the marked scene.  
BD561-N-BCANLLK-ENG.indd 34  
2010.1.22 8:31:40 PM  
Operation  
35  
To delete a Marker  
1. Press SEARCH and the search menu appears  
To start playback from a marked  
scene  
on the screen.  
1. Press SEARCH and the search menu appears  
on the screen.  
u
2. Press to highlight a marker number. Use  
I i  
/
to select a marked scene that you  
want to playback.  
u
2. Press to highlight a marker number. Use  
3. Press ENTER ( ) to start playback from the  
I i  
/
to select a marked scene that you  
want to delete.  
marked scene.  
3. Press CLEAR and the marked scene is erased  
from the search menu.  
NOTE  
This function may not work depending on discs,  
titles.  
NOTE  
This function may not work depending on discs,  
titles.  
All marked points are cleared if the title is in  
4
complete stop ( ) mode, the title is changed or  
x
if you unload the disc.  
If the total length of the title is less than 10  
seconds, this function is not available.  
Using the search menu  
BD  
DVD  
AVCHD MOVIE  
Using search menu, you can easily to find the  
point where you want to start playback.  
To search a point  
1. During playback, press SEARCH to display  
the search menu.  
I i  
/ to skip the playback 15 seconds  
2. Press  
forward or backward. You can select a  
point that you want to skip by pressing and  
I i  
/ button.  
holding  
BD561-N-BCANLLK-ENG.indd 35  
2010.1.22 8:31:41 PM  
36  
Operation  
Changing content list view  
MOVIE MUSIC PHOTO  
Viewing content information  
MOVIE  
On the [Movie], [Music] or [Photo] menu, you  
can change the content list view.  
The player can display the content information.  
U u I i  
.
1. Select a file using  
/
/
/
2. Press INFO/DISPLAY ( ) to display the  
Method 1  
Press red (R) coloured button repeatedly.  
option menu.  
U u  
,
3. Select the [Information] option using  
/
and press ENTER ( ).  
The file information appears on the screen.  
During movie playback, you can display the file  
information by pressing TITLE/POPUP.  
NOTE  
The information displayed on the screen may  
not be correct compared to the actual content  
information.  
4
Last Scene Memory  
BD  
DVD  
This unit memorizes the last scene from the  
last disc that is viewed. The last scene remains  
in memory even if you remove the disc from  
the unit or switch off the unit. If you load a disc  
that has the scene memorized, the scene is  
automatically recalled.  
NOTE  
Last Scene Memory function for a previous disc  
is erased once a different disc is played.  
Method 2  
1. On the content list, press INFO/DISPLAY (  
This function may not work depending on the  
disc.  
)
to display the option menu.  
On BD-Video discs with BD-J, the last scene  
memory function does not work.  
U u  
/ to select the [View Change]  
2. Use  
option.  
This unit does not memorize settings of a disc if  
you switch off the unit before commencing to  
play it.  
3. Press ENTER ( ) to change the content list  
view.  
BD561-N-BCANLLK-ENG.indd 36  
2010.1.22 8:31:41 PM  
Operation  
37  
Movie Information – Select this option  
i
On-Screen display  
and press ENTER ( ) to display movie  
information from Gracenote Media  
Database (BD/DVD only).  
You can display and adjust various information  
and settings about the content.  
U u  
/ .  
2. Select an option using  
I i  
to adjust the selected option  
3. Use  
value.  
/
Displaying content information  
on-screen  
4. Press RETURN ( ) to exit the On-Screen  
O
display.  
BD  
DVD  
AVCHD MOVIE  
1. During playback, press INFO/DISPLAY ( ) to  
NOTE  
show various playback information.  
If no button is pressed for a few seconds, the on-  
screen display disappears.  
a
b
c
A title number cannot be selected on some  
discs.  
Available items may differ depending on discs  
or titles.  
4
d
If BD interactive title is playing back, some  
setting information is displayed on the screen  
but prohibited to be changed.  
e
f
g
h
i
To use the [Movie Information] option, the player  
must be connected to the broadband internet  
for accessing the Gracenote Media Database.  
If the information from the Gracenote Media  
Database is either not correct or does not exist,  
Title – current title number/total number  
a
b
c
d
LG is a licensee of Gracenote technology and is  
not responsible or reliable for information from  
the Gracenote Media Database.  
of titles  
Chapter – current chapter number/total  
number of chapters  
Time – elapsed playing time/total  
playback time  
Audio – selected audio language or  
channel  
Subtitle – selected subtitle  
e
f
Angle – selected angle/total number of  
angles  
TV Aspect Ratio – selected TV aspect  
Ratio  
g
h
Picture Mode – selected picture mode  
BD561-N-BCANLLK-ENG.indd 37  
2010.1.22 8:31:42 PM  
38  
Operation  
Playing from selected time  
NOTE  
BD  
DVD  
AVCHD MOVIE  
Some discs allow you to change audio selections  
only via the disc menu. In this case, press TITLE/  
POP-UP or DISC MENU button and choose the  
appropriate audio from the selections on the  
disc menu.  
1. Press INFO/DISPLAY ( ) during playback.  
The time search box shows the elapsed  
playing time.  
2. Select the [Time] option and then input the  
required start time in hours, minutes, and  
seconds from left to right.  
Immediately after you have switched sound,  
there may be a temporary discrepancy between  
the display and actual sound.  
For example, to find a scene at 2 hours, 10  
minutes, and 20 seconds, enter21020.  
On BD-ROM disc, the multi audio format (5.1CH  
or 7.1CH) is displayed with [MultiCH] in the on-  
screen display.  
I i  
/ to skip the playback 60 seconds  
Press  
forward or backward.  
3. Press ENTER ( ) to start playback from  
selected time.  
Selecting a subtitle language  
BD  
DVD  
AVCHD MOVIE  
NOTE  
1. During playback, press INFO/DISPLAY ( ) to  
4
display the On-Screen display.  
This function may not work on some disc or titles.  
U u  
/
2. Use  
to select the [Subtitle] option.  
I i  
/
3. Use  
to select desired subtitle language.  
Hearing different audio  
4. Press RETURN ( ) to exit the On-Screen  
O
display.  
BD  
DVD  
AVCHD MOVIE  
1. During playback, press INFO/DISPLAY ( ) to  
display the On-Screen display.  
NOTE  
U u  
2. Use  
/
to select the [Audio] option.  
Some discs allow you to change subtitle selections  
only via the disc menu. If this is the case, press  
TITLE/POPUP or DISC MENU button and choose  
the appropriate subtitle from the selections on the  
disc menu.  
I i  
3. Use  
/
to select desired audio language,  
audio track or audio channel.  
BD561-N-BCANLLK-ENG.indd 38  
2010.1.22 8:31:42 PM  
Operation  
39  
Watching from a different  
angle  
Changing the Picture Mode  
BD  
DVD  
AVCHD MOVIE  
BD  
DVD  
You can change the [Picture mode] option  
during playback.  
If the disc contains scenes recorded at different  
camera angles, you can change to a different  
camera angle during playback.  
1. During playback, press INFO/DISPLAY ( ) to  
display the On-Screen display.  
1. During playback, press INFO/DISPLAY ( ) to  
display the On-Screen display.  
U u  
/
2. Use  
to select the [Picture Mode]  
option.  
U u  
2. Use  
/
to select the [Angle] option.  
to select desired angle.  
I i  
3. Use  
/
to select desired option.  
I i  
/
3. Use  
4. Press RETURN ( ) to exit the On-Screen  
O
4. Press RETURN ( ) to exit the On-Screen  
O
display.  
display.  
Setting the [User setting] option  
1. During playback, press INFO/DISPLAY ( ) to  
Changing the TV Aspect Ratio  
BD  
DVD  
AVCHD MOVIE  
display the On-Screen display.  
You can change the TV aspect ratio setting  
during playback.  
U u  
option.  
2. Use  
/
to select the [Picture Mode]  
4
1. During playback, press INFO/DISPLAY ( ) to  
I i  
3. Use  
/
to select the [User setting] option,  
display the On-Screen display.  
and press ENTER ( ).  
U u  
/
2. Use  
to select the [TV Aspect Ratio]  
option.  
I i  
/
3. Use  
to select desired option.  
4. Press RETURN ( ) to exit the On-Screen  
O
display.  
NOTE  
U u I i  
to adjust the [Picture Mode]  
4. Use  
options.  
Select [Default] option then press ENTER  
/
/
/
Even if you change the value of the [TV Aspect  
Ratio] option in On-Screen display, the [TV Aspect  
Ratio] option in the [Setup] menu is not changed.  
(
) to reset the all video adjustments.  
U u I i  
to select the [Close] option,  
5. Use  
/
/
/
and press ENTER ( ) to finish setting.  
BD561-N-BCANLLK-ENG.indd 39  
2010.1.22 8:31:42 PM  
40  
Operation  
3. Press HOME ( ), and set the [BD-LIVE  
connection] option on the [Setup] menu  
(page 29).  
Enjoying BD-LIVE  
Depending on the disc, the BD-LIVE  
function may not be operated if [BD-  
LIVE connection] option is set to [Partially  
Permitted].  
This unit allows you to enjoy functions such as  
picture-in-picture, secondary audio and Virtual  
packages, etc., with BD-Video supporting  
BONUSVIEW (BD-ROM version 2 Profile 1  
version 1.1/ Final Standard Profile). Secondary  
video and audio can be played from a disc  
compatible with the picture-in-picture  
function. For the playback method, refer to the  
instructions in the disc.  
4. Insert a BD-ROM with BD-LIVE.  
The operations may differ depending on  
the disc. Refer to the manual supplied with  
the disc.  
In addition to the BONUSVIEW function, BD-  
Video supporting BD-LIVE (BD-ROM version  
2 Profile 2) that has a network extension  
function allows you to enjoy more functions  
such as downloading new movie trailers by  
connecting this unit to the internet.  
CAUTION  
Do not extract the connected USB device while  
content is being downloaded or a Blu-ray disc is  
still in the disc tray. Doing so may damage the  
connected USB device and BD-LIVE features may  
not operate properly with the damaged USB  
device anymore. If the connected USB device  
seems damaged from such an action, you can  
format the connected USB device from the PC and  
reuse it with this player.  
4
1. Check the network connection and settings  
(pages 20-22).  
2. Insert a USB storage device to the USB port  
on the front panel.  
A USB storage device is needed to  
download bonus content.  
NOTE  
Some BD-LIVE contents may be restrictively  
accessed in some territories by contents  
provider’s own decision.  
USB device connection  
It may take up to several minutes to load and  
start enjoying BD-LIVE contents.  
BD561-N-BCANLLK-ENG.indd 40  
2010.1.22 8:31:43 PM  
Operation  
41  
Playing a movie file  
and VR disc  
NOTE  
The file requirements are described on page 10.  
You can use various playback functions. Refer to  
pages 31-39.  
Unfinalized DVD VR format discs may not be  
played in this player.  
You can play DVD-RW discs that are recorded  
in Video Recording (VR) format and movie files  
contained in a disc/USB device.  
Some DVD-VR discs are made with CPRM data  
by DVD RECORDER. This unit cannot support  
these kinds of discs.  
1. Press HOME ( ).  
What is CPRM?  
CPRM is a copy protection system (with  
scramble system) only allowing the recording of  
‘copy oncebroadcast programs. CPRM stands  
for Content Protection for Recordable Media.  
Selecting a subtitle file  
MOVIE  
I i  
/ , and press ENTER  
2. Select [Movie] using  
).  
4
(
I i  
/ , and  
3. Select [Disc] or [USB] option using  
If a movie file name and the subtitle file  
name are the same, subtitle file is played  
automatically when playing the movie file.  
press ENTER ( ).  
If the subtitle file name is different with the  
movie file name, you need to select the subtitle  
file on the [Movie] menu before playing the  
movie.  
U u I i  
to select the subtitle file you  
1. Use  
/
/
/
wish to play in the [Movie] menu.  
This step is needed only when a disc and a  
USB device is connected simultaneously to  
this unit.  
2. Press ENTER ( ).  
U u I i  
, and press  
4. Select a file using  
/
/
/
B
(PLAY) or ENTER ( ) to play the file.  
Press ENTER ( ) again to deselect the  
subtitle file. Selected subtitle file will be  
displayed when you play the movie file.  
BD561-N-BCANLLK-ENG.indd 41  
2010.1.22 8:31:43 PM  
42  
Operation  
Viewing a photo  
NOTE  
If you press (STOP) during playback, the subtitle  
x
selection is cancelled.  
You can view photo files using this player.  
1. Press HOME ( ).  
Changing subtitle code page  
MOVIE  
If the subtitle is not displayed properly, you  
can change the subtitle code page to view the  
subtitle file properly.  
1. During playback, press INFO/DISPLAY ( ) to  
I i  
, and press ENTER  
2. Select [Photo] using  
).  
/
display the On-Screen display.  
(
U u  
2. Use  
/
to select the [Code Page] option.  
to select desired code option.  
I i  
,
3. Select the [Disc] or [USB] option using  
/
I i  
/
3. Use  
and press ENTER ( ).  
4
This step is needed only when a disc and a  
USB device is connected simultaneously on  
this unit.  
4. Press RETURN ( ) to exit the On-Screen  
O
display.  
U u I i  
, and press  
4. Select a file using  
/
/
/
ENTER ( ) to view the photo in full screen.  
BD561-N-BCANLLK-ENG.indd 42  
2010.1.22 8:31:44 PM  
Operation  
43  
To play a slide show  
Current photo/Total number of photos  
a
b
c
d
e
f
g
h
I i  
/ to view previous/next photo.  
Press (PLAY) to start slide show.  
– Use  
B
Slide Show – Press ENTER ( ) to start or  
pause slide show.  
To stop a slide show  
Music Select – Select the background  
music for the slide show (page 44).  
Press (STOP) during slide show.  
x
Music –Press ENTER ( ) to start or pause  
background music.  
To pause a slide show  
Press (PAUSE) during slide show.  
X
Rotate – Press ENTER ( ) to rotate the  
photo clockwise.  
Press (PLAY) to re-start the slide show.  
B
Zoom – Press ENTER ( ) to display the  
[Zoom] menu.  
To skip to the next/previous photo  
While viewing a photo in full screen, press or  
I
I i  
to select a transition  
Effect – Use  
effect between photos in a slide show.  
I i  
/
i
to go to the previous or next photo.  
Speed – Use  
/
to select a delaying  
NOTE  
speed between photos in a slide show.  
The file requirements are described on page 10.  
3. Press RETURN ( ) to exit the option menu.  
O
4
You can use various playback functions. Refer to  
pages 31-39.  
Options while viewing a photo  
You can use various options while viewing a  
photo in full screen.  
1. While viewing a photo in full screen, press  
INFO/DISPLAY ( ) to display the option  
menu.  
U u  
/ .  
2. Select an option using  
a
b
c
d
e
f
g
h
BD561-N-BCANLLK-ENG.indd 43  
2010.1.22 8:31:44 PM  
44  
Operation  
U u  
to select a device, and press ENTER  
7. Use  
).  
/
Listening to music during a  
slide show  
(
Devices that you can select may differ  
depending on the location of the photo file  
you are displaying in full screen.  
You can display photo files while listening to  
music files.  
1. Press HOME ( ).  
U u  
/ to select a file or a folder you wish  
8. Use  
to play.  
I i  
/ , and press  
2. Select [Photo] using  
ENTER ( ).  
Select a folder and press ENTER ( ) to  
display the lower directory.  
I i  
/ ,  
3. Select the [Disc] or [USB] option using  
and press ENTER ( ).  
Select and press ENTER ( ) to display  
the upper directory.  
4
i
9. Use to select [OK], and press ENTER (  
)
to complete music selection.  
U u I i  
, and press  
4. Select a file using  
/
/
/
ENTER ( ) to view the photo.  
5. Press INFO/DISPLAY ( ) to display the  
option menu.  
U u  
/ to select [Music Select] option,  
6. Use  
and press ENTER ( ) to display the [Music  
Select] menu.  
BD561-N-BCANLLK-ENG.indd 44  
2010.1.22 8:31:45 PM  
Operation  
45  
Listening to music  
NOTE  
The file requirements are described on page 10.  
You can use various playback functions. Refer to  
pages 31-39.  
The player can play Audio CDs and music files.  
1. Press HOME ( ).  
Audio CD Recording  
You can record one desired track or all of the  
tracks from an Audio CD to a USB storage  
device.  
1. Insert a USB storage device to the USB port  
I i  
/ , and press ENTER  
on the front panel.  
2. Select [Music] using  
).  
(
2. Press (OPEN/CLOSE), and place an Audio  
Z
I i  
/ ,  
CD on the disc tray.  
3. Select the [Disc] or [USB] option using  
and press ENTER ( ).  
Press (OPEN/CLOSE) to close the disc  
Z
tray. The playback starts automatically.  
4
3. Press INFO/DISPLAY to display the option  
menu.  
U u  
/ to select [CD Recording] option,  
4. Use  
and press ENTER to display the [CD  
Recording] menu.  
U u  
to select a track you wish to copy  
on the menu, and press ENTER.  
5. Use  
/
This step is needed only when a disc and a  
USB device is connected simultaneously on  
this unit.  
Repeat this step to select tracks as many as  
you want.  
4. Select a music file or audio track using  
U u I i  
, and press ENTER ( ) to play the  
/
/
/
music.  
Select all the tracks on an Audio  
CD.  
Selects an encoding option from  
the pop-up menu (128kbps,  
192kbps, 320kbps or Lossless).  
Cancels the recording and  
returns to the previous screen.  
BD561-N-BCANLLK-ENG.indd 45  
2010.1.22 8:31:45 PM  
46  
Operation  
U u I i  
ENTER.  
6. Use  
/
/
/
to select [Start], and press  
NOTE  
U u I i  
to be copied.  
7. Use  
/
/
/
to select a destination folder  
The table below shows the average recording  
time from an audio track with 4 minutes of  
playback time to a music file with 192kbps as an  
example.  
stop mode  
1.4 min.  
during playback  
2 min.  
All times in the above table are approximate.  
Actual ripping time for USB storage device varies  
depending on the USB storage device’s ability.  
If you want to create a new folder, use  
U u I i  
to select [New Folder] and press  
ENTER.  
Make sure that there is minimum of 50 MB free  
space when recording into the USB storage  
device.  
/
/
/
Enter a folder name using the virtual  
keyboard, and press ENTER while [OK] is  
selected.  
The length of the music should be longer than  
20 seconds for the proper recording.  
Do not turn off this player or extract the  
connected USB storage device during Audio CD  
recording.  
U u I i  
to select [OK], and press  
8. Use  
/
/
/
4
ENTER to start Audio CD Recording.  
If you want to stop the Audio CD  
Recording, press ENTER ( ) while [Cancel]  
is highlighted.  
The making of unauthorized copies of copy-  
9. A message appears when Audio CD  
Recording is completed.  
protected material, including computer programs,  
files, broadcasts and sound recordings, may be  
an infringement of copyrights and constitute a  
criminal offense.  
This equipment should not be used for such  
purposes.  
Press ENTER ( ) to check the music file  
created in the destination folder.  
Be responsible  
Respect copyrights  
BD561-N-BCANLLK-ENG.indd 46  
2010.1.22 8:31:46 PM  
Operation  
47  
Viewing information from  
Gracenote Media Database  
NOTE  
The player must be connected to the broadband  
internet for accessing the Gracenote Media  
Database.  
The player can access to the Gracenote Media  
Database and loads the music information so  
that Track name, Artist Name, Genre and other  
text information can be displayed on the list.  
If the music information is not in the Gracenote  
Media Database, message appears on the  
screen.  
If the information from the Gracenote Media  
Database is either not correct or does not exist,  
Audio CD  
When you insert an Audio CD, the player starts  
playback automatically and load the music title  
from the Gracenote Media Database.  
Depending on the cases, it will takes a few  
minutes to load music information from the  
Gracenote Media Database.  
If there is no music information in the database,  
music titles will not be displayed on the screen.  
Information may be displayed in English, if your  
own language is not available on the Gracenote  
Media Database.  
Music file  
This function is not available for on-line content.  
U u I i  
.
1. Select a music file using  
/
/
/
LG is a licensee of Gracenote technology and is  
not responsible or reliable for information from  
the Gracenote Media Database.  
4
2. Press INFO/DISPLAY ( ) to display the  
option menu.  
U u  
/ ,  
3. Select the [Information] option using  
and press ENTER ( ).  
The player accesses Gracenote Media  
Database for the music information.  
BD/DVD/Movie file  
While listening to music from the movie  
playback, press MUSIC ID to start loading  
music information from the Gracenote Media  
Database.  
BD561-N-BCANLLK-ENG.indd 47  
2010.1.22 8:31:46 PM  
48  
Operation  
Playing YouTube™ videos  
Using the NetCast™  
Entertainment Access  
You can use various content services via  
Internet with the NetCast Entertainment  
Access feature.  
You can browse, search and watch YouTube™  
videos over the internet on your TV via your LG  
BD player.  
1. Check the network connection and settings  
(pages 20-22).  
Watch YouTube™ videos on your TV  
1. On the player, select the [YouTube™] option  
2. Press HOME ( ).  
I i  
, and press  
in the [NetCast] menu using  
ENTER ( ).  
/
I i  
3. Select the [NetCast] using  
/
, and press  
ENTER ( ).  
U
2. Press to select the option menu bar.  
I i  
to select an option and press  
I i  
4. Select an option using  
/
, and press  
3. Use  
/
ENTER ( ).  
ENTER ( ) to search videos.  
YouTube™ – See page 48-51  
4
I i  
to select a video and press ENTER  
4. Use  
/
Picasa™ Web Albums – See page 52-54  
(
) or (play) to play the video.  
B
AccuWeather – See page 55-56  
Button  
Operation  
5. While enjoying on-line content from  
NetCast, press blue (B) colored button to go  
to the NetCast Home screen.  
Starts playback of the video  
with content detail.  
or ENTER  
B
INFO/  
DISPLAY  
Toggle between playback in  
full screen and playback screen  
with content detail.  
NOTE  
The background image on the NetCast home  
indicates the weather of your favorite city in the  
AccuWeather feature.  
To pause a video while it is  
playing. To resume playing a  
X
x
paused video, press again.  
B
Stops the video and displays  
related videos list.  
Skip the playback forward or  
backward .  
/
. >  
BD561-N-BCANLLK-ENG.indd 48  
2010.1.22 8:31:46 PM  
Operation  
49  
About the YouTube™ menu  
There are various options on the  
NOTE  
U u I i  
to select an  
option and press ENTER ( ) to select the  
options as described below.  
YouTube™ menu. Use  
/
/
/
The YouTube™ menu can display 5 videos in the  
videos list. Press green (G) or yellow (Y) buttons  
to display previous/next 5 videos.  
If you select the [Most Viewed] or [Top Rated]  
option in the YouTube™ menu, the period  
options appear at the bottom of the screen. Use  
Featured – The featured videos list will be  
displayed.  
U u I i  
to select a period option and press  
/
/
/
Recent Videos – The most recently updated  
videos list will be displayed.  
ENTER ( ) to display the videos list within the  
selected period.  
Most Viewed – The most viewed videos list  
will be displayed. The period option appears  
at the bottom of the screen.  
The videos list searched from the player may  
differ with the list searched from a web browser  
on PC.  
The playback of YouTube™ videos may be  
paused, stopped or buffering occurring often  
depending on your broadband speed. We  
recommend a minimum connection speed  
of 1.5 Mbps. For the best playback condition,  
a connection speed of 4.0 Mbps is required.  
Sometimes your broadband speed varies based  
on your ISP’s network conditions. Contact your  
ISP if you have problems maintaining a fast  
connection that is reliable, or if you want to  
increase your connection speed. Many ISPs offer  
a variety of broadband speed options.  
Top Rated – The best rated videos list from  
YouTube™ server will be displayed. The period  
option appears at the bottom of the screen.  
Search – The virtual keyboard will be  
displayed. SeeSearching videoson page 51  
for more detail.  
4
History – The videos list that you previously  
played on this unit will be displayed.  
Maximum of 25 videos can be stored.  
Favorites – This option will only appear  
when the unit is in sign-in status. Displays the  
videos list that is arranged in the YouTube™  
server with your account. Some videos may  
not appear on the [Favorites] list, even if the  
videos are arranged in the server.  
Sign in (Sign Out) – Displays the virtual  
keyboard to sign in or returns to the sign-  
out status. SeeSign in with your YouTube™  
accounton page 51 for more details.  
Local site – Choose which country’s videos  
you would like to view. The countries listed on  
the [Local Site] menu may be different from  
those listed on the YouTube™ web site.  
BD561-N-BCANLLK-ENG.indd 49  
2010.1.22 8:31:47 PM  
50  
Operation  
Keypad Mode  
Using the virtual keyboard  
On the virtual keyboard, there are two input  
modes for the entering a character. Press  
the yellow (Y) coloured button to toggle the  
display between keyboard mode and keypad  
mode.  
This mode allows you to enter letters by  
pressing the buttons on the remote control.  
Press the buttons with the required letter once,  
twice, three or four times until the letter is  
displayed.  
Keyboard Mode  
U u I i  
Use / to select a letter on the screen,  
/
/
and press ENTER to confirm your selection.  
Button  
Operation  
CLEAR  
Deletes the previous character  
at the cursor position.  
4
REPEAT  
Inserts a space at the cursor  
position.  
[Cancel] – Returns to the previous screen.  
[Space] – Inserts a space at the cursor  
position.  
Changes the character set of  
the remote control (#+-=&,  
123, ABC or abc)  
/
m M  
[Backspace] – Deletes the previous character  
at the cursor position.  
[ABC / abc / #+-=&] – Changes the virtual  
keyboard settings to capital letters, small  
letters or symbols.  
NOTE  
The keypad mode is available only in the  
[YouTube™] and [Picasa™ Web Albums] features.  
Press CLEAR to clear all entered characters.  
To enter a letter with an accent mark:  
U u I i  
on the virtual  
1. Select a letter using  
/
/
/
key board.  
2. Press INFO/DISPLAY ( ) to display the  
extended character set.  
I i  
/ to select a character then press  
3. Use  
ENTER.  
Available languages to enter on the keyboard  
mode are as follows: English, Spanish, Italian,  
French, German, Dutch, Portuguese, Swedish,  
Polish and Czech.  
BD561-N-BCANLLK-ENG.indd 50  
2010.1.22 8:31:47 PM  
Operation  
51  
Searching videos  
You can search for videos by entering search  
words of up to 128 characters.  
U u I i  
to select a character then  
press ENTER ( ) to confirm your selection  
on the virtual keyboard.  
2. Use  
/
/
/
Refer toUsing the virtual keyboardon  
page 50 for using virtual keyboard.  
I i  
to select [Search] option from the  
menu and press ENTER ( ) to display the  
virtual keyboard.  
1. Use  
/
3. When you finish entering the username  
and the password, select [OK] and press  
ENTER ( ) to sign in.  
Refer toUsing the virtual keyboardon  
page 50 for using virtual keyboard.  
4. If you want to sign out, select the [Sign Out]  
from the YouTube™ menu and press  
ENTER ( ).  
This unit can automatically store up to 5  
username which were previously signed-in.  
The username list appears when you select the  
[Sign In] option.  
When you are entering a character,  
maximum of 5 suggestion words will be  
displayed.  
Select a stored username on the list and press  
ENTER ( ) to display the keyboard menu with  
the selected username entered. You will then  
only need to enter the password to sign in.  
4
2. When you finish entering the search words,  
select [OK] and press ENTER ( ) to display  
the related video list.  
Sign in with your YouTube™ account  
To watch videos from your [Favorites] video list  
on the YouTube™ server with your account, you  
need to sign in with your YouTube™ account.  
I i  
to select [Sign In] option from the  
menu and press ENTER ( ) to display the  
virtual keyboard.  
1. Use  
/
Select the [X] symbol and press ENTER ( ) to  
delete the stored username.  
BD561-N-BCANLLK-ENG.indd 51  
2010.1.22 8:31:47 PM  
52  
Operation  
Options while viewing a photo  
You can use various options during viewing a  
photo in full screen.  
Viewing Picasa™ Web Albums  
1. While viewing a photo in full screen, press  
INFO/DISPLAY ( ) to display the option  
menu.  
Enjoy photo albums from friends and family on  
the Picasa™ on-line service.  
U u  
.
2. Select an option using  
/
View Picasa™ Web Albums on your  
TV  
1. On the player, select the [Picasa™ Web  
a
b
c
d
e
f
g
Albums] option in the [NetCast] menu  
I i  
/ , and press ENTER ( ).  
using  
Featured photos are displayed on the  
screen.  
U u I i  
to select a photo and press  
2. Use  
/
/
/
ENTER ( ) to view the photo in full screen.  
Current photo/Total number of photos  
a
b
c
d
e
f
g
I i  
/ to view previous/next photo.  
– Use  
4
Slide Show – Press ENTER ( ) to start or  
pause slide show.  
Button  
Operation  
Starts a slide show.  
B
Add to NetCast Friends List – Add the  
current photo owner to my friend list.  
INFO/  
DISPLAY  
Displays the photo option  
menu.  
Rotate – Press ENTER ( ) to rotate the  
photo clockwise.  
Pauses a slide show. To resume  
X
x
slide show, press again.  
B
Zoom – Press ENTER ( ) to display the  
[Zoom] menu.  
Stops the slide show and  
I i  
to select a transition  
Effect – Use  
effect between photos in a slide show.  
I i  
to select a delay time  
/
return to the Picasa™ menu.  
I i  
/
Moves to the next or previous  
photo.  
Speed – Use  
/
between photos in a slide show.  
3. Press RETURN ( ) to exit the option menu.  
O
BD561-N-BCANLLK-ENG.indd 52  
2010.1.22 8:31:48 PM  
Operation  
53  
About the Picasa™ menu  
Adding friends  
There are various options on the Picasa™  
If you add your friends on the [NetCast Friends]  
menu, you can see the photos of your friend’s  
public photos directly.  
U u I i  
to select an menu option  
menu. Use  
/
/
/
and press ENTER ( ) to select the options as  
described below.  
1. Select the [NetCast Friends] on the  
U u I i  
, and press  
Picasa™ menu using  
ENTER ( ).  
/
/
/
Home – The featured photo list will be  
displayed.  
2. Press ENTER ( ) to display the virtual  
NetCast Friends – List of your friends will be  
displayed.  
keyboard.  
4
3. Enter a name using the virtual keyboard.  
Search – Enter a search word to find related  
photos. The virtual keyboard will be displayed  
(page 54).  
Refer toUsing the virtual keyboardon  
page 50 for using virtual keyboard.  
U u I i  
, and press  
ENTER ( ) to display the web album of  
your friend.  
4. Select [OK] using  
/
/
/
My Photos – Displays the photos organized  
in my Picasa™ Web Albums. This option is  
available only when the unit is in sign-in  
status.  
NOTE  
Favorites – Displays up to 50 favorite web  
albums that are arranged in the Picasa™  
web server with your account. This option  
is available only when the unit is in sign-in  
status.  
If you want to delete your friend from the list,  
press green (G) coloured button while the web  
album is selected.  
If you want to add more friends, press red (R)  
coloured button on the list.  
Sign in (Sign Out) – Displays the virtual  
keyboard to sign in or returns to the sign-out  
status (page 54)  
You can add more web albums of your friends  
up to 50.  
NOTE  
Photos displayed in [My Photos] and [Favorites]  
may differ from the photos from a web browser on  
PC.  
BD561-N-BCANLLK-ENG.indd 53  
2010.1.22 8:31:48 PM  
54  
Operation  
3. Enter the password using the virtual  
keyboard, and press ENTER ( ) while [OK] is  
selected.  
Searching photos  
You can enter a search word to find related  
photos.  
Your web album is displayed on the screen.  
1. Select the [Search] on the Picasa™ menu  
U u I i  
, and press ENTER ( ).  
4. If you want to sign out, select the [Sign Out]  
from the Picasa™ menu and press  
ENTER ( ).  
using  
/
/
/
2. Enter a search word using the virtual  
keyboard.  
This unit can automatically store up to 5 user  
names which were previously signed-in. The  
user name list appears when you select the  
[Sign In] option.  
Refer toUsing the virtual keyboardon  
page 50 for using virtual keyboard.  
U u I i  
, and press  
3. Select [OK] using  
/
/
/
ENTER ( ) to display the search result.  
Select a stored user name on the list and press  
ENTER ( ) to display the virtual keyboard with  
the selected user name is entered. You will  
then only need to enter the password to sign  
in.  
NOTE  
The search result from the player may differ from  
the result when searched from a web browser on  
PC.  
4
Signing in with your account  
To display photos in your web album on the  
screen, you need to sign in with your Picasa™  
account.  
1. Select the [Sign In] on the Picasa™ menu  
U u I i  
, and press ENTER ( ).  
using  
/
/
/
Select the [X] symbol and press ENTER ( ) to  
delete the stored user name.  
2. Enter your user name using the virtual  
keyboard, and press ENTER ( ) while [OK] is  
selected.  
Refer toUsing the virtual keyboardon  
page 50 for using the virtual keyboard.  
BD561-N-BCANLLK-ENG.indd 54  
2010.1.22 8:31:49 PM  
Operation  
55  
U u I i  
to select [Home] and press  
ENTER ( ) to display weather information  
of the selected city.  
6. Use  
/
/
/
Using the AccuWeather  
See on-line local and global weather forecasts  
from AccuWeather.com.  
Viewing weather information  
1. On the player, select the [AccuWeather]  
Press red (R) coloured button to toggle  
display between Fahrenheit or Celsius  
thermometer.  
I i  
,
option in the [NetCast] menu using  
and press ENTER ( ).  
/
The city selection menu appears on the  
screen.  
I i  
to select previous or next city, and  
7. Use  
/
press ENTER ( ) to display the weather  
information.  
This step works only when you add more  
than 1 city to the [Favorite city List].  
4
NOTE  
The weather information is not always correct.  
The weather information may be displayed in  
English, if your own language is not available on  
the AccuWeather service.  
2. Press ENTER while [Add City to Favorite City  
List] is selected.  
U u  
/ , and press ENTER  
3. Select a region using  
).  
(
U u I i  
4. Select a, country using  
/
/
/
, and press  
ENTER ( ).  
U u I i  
5. Select a city using  
/
/
/
, and press  
ENTER ( ).  
BD561-N-BCANLLK-ENG.indd 55  
2010.1.22 8:31:49 PM  
56  
Operation  
Adding more cities  
I i  
/ to select [Favorite City List] on the  
1. Use  
AccuWeather menu, and press ENTER ( ).  
2. Press ENTER ( ) while [Add City to Favorite  
City List] is selected.  
3. Select a region, country and city using  
U u I i  
and ENTER ( ).  
/
/
/
4. Repeats step 2-3 to add up to 5 cities.  
4
Select the [X] symbol and press ENTER (  
to delete the stored favorite city.  
)
U u  
/ to select a city form the [Favorite  
5. Use  
City List], and press ENTER ( ) to display  
the weather information.  
BD561-N-BCANLLK-ENG.indd 56  
2010.1.22 8:31:50 PM  
Maintenance  
57  
5
Maintenance  
Notes on Discs  
Handling the Unit  
Handling Discs  
When shipping the unit  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that fingerprints  
do not get on the surface. Never stick paper or  
tape on the disc.  
Please save the original shipping carton and  
packing materials. If you need to ship the unit,  
for maximum protection, re-pack the unit as it  
was originally packed at the factory.  
Storing Discs  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as  
insecticide spray near the unit.  
After playing, store the disc in its case. Do not  
expose the disc to direct sunlight or sources of  
heat and never leave it in a parked car exposed  
to direct sunlight.  
Wiping with strong pressure may damage  
the surface.  
Do not leave rubber or plastic products in  
contact with the unit for a long period of  
time.  
5
Cleaning Discs  
Fingerprints and dust on the disc can cause  
poor picture quality and sound distortion.  
Before playing, clean the disc with a clean  
cloth. Wipe the disc from the centre to out.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If  
the surfaces are extremely dirty, use a soft  
cloth lightly moistened with a mild detergent  
solution. Do not use strong solvents such as  
alcohol, benzine, or thinner, as these might  
damage the surface of the unit.  
Do not use strong solvents such as alcohol,  
benzine, thinner, commercially available  
cleaners, or anti-static spray intended for older  
vinyl records.  
Maintaining the Unit  
The unit is a high-tech, precision device. If  
the optical pick-up lens and disc drive parts  
are dirty or worn, the picture quality could be  
diminished. For details, please contact your  
nearest authorized service centre.  
BD561-N-BCANLLK-ENG.indd 57  
2010.1.22 8:31:50 PM  
58  
Troubleshooting  
6
Troubleshooting  
General  
Symptom  
Cause & Solution  
The Power does not turn  
on.  
Plug the power cord into the wall outlet securely.  
The unit does not start  
playback.  
Insert a playable disc. (Check the disc type, colour system,  
and regional code.)  
Place the disc with the playback side down.  
Place the disc on the disc tray correctly inside the guide.  
Clean the disc.  
Cancel the Rating function or change the rating level.  
The angle cannot be  
changed.  
Multi-angles are not recorded on the DVD Video being  
played.  
Cannot play music/photo/  
movie files.  
The files are not recorded in a format that the unit can play.  
The unit does not support the codec of the movie file.  
The remote control does  
not work properly.  
The remote control is not pointed at the remote sensor of  
the unit.  
6
The remote control is too far from the unit.  
There is an obstacle in the path of the remote control and  
the unit.  
The batteries in the remote control are exhausted.  
The unit is plugged in, but You can reset the unit as follows.  
the power will not turn on 1. Press and hold the POWER button for at least five seconds.  
or off.  
This will force the unit to power off then turn the unit back  
on.  
The unit is not operating  
normally.  
2. Unplug the power cord, wait at least five seconds, and then  
plug it in again.  
BD561-N-BCANLLK-ENG.indd 58  
2010.1.22 8:31:51 PM  
Troubleshooting  
59  
Picture  
Symptom  
Cause & Solution  
There is no picture.  
Select the appropriate video input mode on the TV so the  
picture from the unit appears on the TV screen.  
Connect the video connection securely.  
Check the [HDMI Colour Setting] in the [Setup] menu is  
set to the appropriate item that conforms to your video  
connection.  
Your TV may not support the resolution you have set on the  
player. Change the resolution that your TV accepts.  
The player’s HDMI OUT jack is connected to a DVI device that  
does not support copyright protection.  
Picture noise appears  
You are playing a disc recorded in a colour system that is  
different from your TV.  
Set the resolution which your TV accepts.  
Sound  
Symptom  
Cause & Solution  
There is no sound or the  
sound is distorted.  
Connect the audio connection securely.  
The input source setting on the amplifier or the connection  
to the amplifier is incorrect.  
6
The unit is in scan, slow motion, or pause mode.  
The sound volume is low.  
Check that the connected amplifier is compatible with the  
audio format output from the player.  
The player’s HDMI OUT jack is connected to a DVI device. The  
DVI jack does not accept audio signal.  
Check the device connected to player’s HDMI OUT jack is  
compatible with audio format output from the player.  
BD561-N-BCANLLK-ENG.indd 59  
2010.1.22 8:31:52 PM  
60  
Troubleshooting  
Network  
Symptom  
Cause & Solution  
BD-LIVE feature does not  
work.  
The connected USB storage may not have enough space.  
Connect the USB storage with at least 1GB free space.  
Ensure that the unit is correctly connected to the local area  
network and can access the internet (see pages 20-22).  
Your broadband speed may not be fast enough to use the  
BD-LIVE features. Contact your Internet Service Provider (ISP)  
and increase the broadband speed is recommended.  
The [BD-LIVE connection] option in the [Setup] menu is set  
to [Prohibited]. Set the option to [Permitted].  
Streaming video services  
(such as YouTube™, etc.) are  
often stopped orbuffered”  
during playback.  
Your broadband service speed may not be fast enough to  
stream video services. Contact your Internet Service Provider  
(ISP) and increase the broadband speed is recommended.  
6
Customer Support  
You can update the Player using the latest software to enhance the products operation and/or  
add new features. To obtain the latest software for this player (if updates have been made),  
BD561-N-BCANLLK-ENG.indd 60  
2010.1.22 8:31:53 PM  
Appendix  
61  
7
Appendix  
Setting up the remote to  
control your TV  
Controlling a TV with  
the Supplied Remote  
Control  
You can operate your TV with the supplied  
remote control.  
If your TV is listed in the table below, set the  
appropriate manufacturer code.  
1. While holding down (TV POWER) button,  
1
You can control your TV using the buttons  
below.  
and press the manufacturer code for your  
TV with the numerical buttons (see the  
table below).  
Manufacturer  
LG  
Code Number  
1(Default), 2  
Zenith  
1, 3, 4  
1, 2  
6, 7  
8, 9  
4
GoldStar  
Samsung  
Sony  
Button  
Operation  
Hitachi  
Turn the TV on or off.  
1 (TV POWER)  
Switch the TV’s input  
source between the TV  
and other input sources.  
2. Release the (TV POWER) button to  
1
AV/INPUT  
complete setting.  
Depending on your TV, some or all buttons  
may not function on the TV, even after  
entering the correct manufacturer code. When  
you replace the batteries of the remote, the  
code number you have set may be reset to  
the default setting. Set the appropriate code  
number again.  
Scan up or down  
through memorized  
channels.  
7
PR/CH U/u  
Adjust the volume of  
the TV  
VOL +/–  
NOTE  
Depending on the unit being connected, you may  
not be able to control your TV using some of the  
buttons.  
BD561-N-BCANLLK-ENG.indd 61  
2010.1.22 8:31:54 PM  
62  
Appendix  
Option 2:  
Network Software  
Update  
If the software update is available from the  
update server, theUpdateicon appears at  
the bottom of the Home menu. Press blue (B)  
coloured button to start the update procedure.  
Network update notification  
Software Update  
From time to time, performance improvements  
and/or additional features or services may be  
made available to units that are connected to  
a broadband home network. If there is new  
software available and the unit is connected  
to a broadband home network, the player will  
inform you about the update as follows.  
You can update the player using the latest  
software to enhance the products operation  
and/or add new features. You can update the  
software by connecting the unit directly to the  
software update server.  
CAUTION  
Option 1:  
Before updating the software in your player,  
remove any disc and USB Device from the player.  
1. The update menu will appear on the screen  
when you turn on the player.  
Before updating the software in your player, turn  
the player off and then turn it back on.  
I i  
/
2. Use  
to select a desired option and then  
press ENTER ( ).  
During the software update procedure, do  
not turn off the player or disconnect AC  
power, or do not press any button.  
If you cancel the update, turn off the power and  
turn it on for stable performance.  
This unit cannot be updated to previous  
software version.  
1. Check the network connection and settings  
(page 20-22).  
[OK]  
Starts the software update.  
2. Select [Software] option in the [Setup]  
menu then press ENTER ( ).  
[Cancel]  
Exits the update menu and displays it next  
booting.  
7
[Hide]  
Exits the update menu and it does not  
appear until next software is uploaded in  
the update server.  
BD561-N-BCANLLK-ENG.indd 62  
2010.1.22 8:31:54 PM  
Appendix  
63  
3. Select [Update] option, and press ENTER  
).  
8. Select [OK] to start updating.  
(
(Selecting [Cancel] will end the update and  
downloaded file will not be re-usable. To  
update software the next time, the software  
update procedure has to be started from  
the beginning again.)  
CAUTION  
Do not turn off the power during the software  
update.  
The player will check for the newest update.  
NOTE  
NOTE  
Pressing ENTER while checking for the update  
will end the process.  
If the software includes the driver update, disc tray  
may open during the process.  
If there is no update available, the Message, “No  
update is found.appears. Press ENTER to return  
to the [Home Menu].  
9. When update is completed, the message,  
“Update is complete.will appear, and then  
power will turn off automatically after 5  
seconds.  
4. If newer version exists, the messageA  
new update was found. Do you want to  
download it?appears.  
10. Turn the power back on. The system now  
operates with the new version.  
NOTE  
The Software Update function may not work  
properly depending on your internet environment.  
In this case, you can obtain the latest software from  
the authorized LG Electronics Service Centre then  
update your player. Refer toCustomer Supporton  
page 60.  
5. Select [OK] to download the update.  
(Selecting [Cancel] will end the update.)  
6. The player starts downloading the newest  
update from the server. (Downloading will  
takes several minutes depending on your  
home network condition)  
7
7. When downloading is completed, the  
message, “Download is complete. Do you  
want to update?appears.  
BD561-N-BCANLLK-ENG.indd 63  
2010.1.22 8:31:54 PM  
64  
Appendix  
Area Code List  
Choose an area code from this list.  
Area  
Code Area  
AF Fiji  
Code Area  
FJ Monaco  
Code Area  
MC Singapore  
MN Slovak Republic  
MA Slovenia  
NP South Africa  
NL South Korea  
Spain  
Code  
SG  
SK  
Afghanistan  
Argentina  
Australia  
Austria  
AR Finland  
AU France  
AT Germany  
BE Great Britain  
BT Greece  
BO Greenland  
BR Hong Kong  
KH Hungary  
CA India  
FI Mongolia  
FR Morocco  
DE Nepal  
SI  
ZA  
KR  
Belgium  
Bhutan  
GB Netherlands  
GR Netherlands  
ES  
Antilles  
AN  
Bolivia  
GL  
Sri Lanka  
LK  
New Zealand  
HK  
NZ  
Brazil  
Sweden  
SE  
Nigeria  
NG  
Cambodia  
Canada  
Chile  
HU  
Switzerland  
CH  
TW  
TH  
TR  
Norway  
IN  
NO  
Taiwan  
Oman  
OM  
CL Indonesia  
CN Israel  
ID  
Thailand  
Pakistan  
IL  
PK  
China  
Turkey  
Panama  
PA  
Colombia  
Congo  
CO Italy  
IT  
Uganda  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Paraguay  
JM  
PY  
CG Jamaica  
CR Japan  
Ukraine  
Philippines  
PH  
Costa Rica  
Croatia  
JP  
United States  
Poland  
KE  
PL  
HR Kenya  
Uruguay  
Portugal  
PT  
Czech Republic  
Denmark  
Ecuador  
Egypt  
CZ Kuwait  
DK Libya  
KW  
Uzbekistan  
Romania  
LY  
RO  
Vietnam  
Russian  
EC Luxembourg  
EG Malaysia  
SV Maldives  
ET Mexico  
LU  
Zimbabwe  
RU  
Federation  
MY  
Saudi Arabia  
MV  
SA  
SN  
El Salvador  
Ethiopia  
Senegal  
MX  
7
BD561-N-BCANLLK-ENG.indd 64  
2010.1.22 8:31:55 PM  
Appendix  
65  
Language code List  
Use this list to input your desired language for the following initial settings: [Disc Audio],  
[Disc Subtitle] and [Disc Menu].  
Language  
Afar  
Code Language  
6565 French  
6570 Frisian  
Code Language  
7082 Lithuanian  
7089 Macedonian  
7176 Malagasy  
7565 Malay  
Code Language  
7684 Sindhi  
7775 Singhalese  
7771 Slovak  
7783 Slovenian  
7776 Spanish  
7773 Sudanese  
7782 Swahili  
7779 Swedish  
7778 Tagalog  
7865 Tajik  
Code  
8368  
8373  
8375  
8376  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8469  
8472  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Afrikaans  
Albanian  
Ameharic  
Arabic  
8381 Galician  
6577 Georgian  
6582 German  
7289 Greek  
6869 Malayalam  
6976 Maori  
Armenian  
Assamese  
Aymara  
6583 Greenlandic  
6588 Guarani  
6590 Gujarati  
6665 Hausa  
7576 Marathi  
7178 Moldavian  
7185 Mongolian  
7265 Nauru  
Azerbaijani  
Bashkir  
Basque  
6985 Hebrew  
7387 Nepali  
7869 Tamil  
Bengali; Bangla 6678 Hindi  
7273 Norwegian  
7285 Oriya  
7879 Telugu  
7982 Thai  
Bhutani  
Bihari  
6890 Hungarian  
6672 Icelandic  
6682 Indonesian  
6671 Interlingua  
7789 Irish  
7383 Panjabi  
8065 Tonga  
Breton  
7378 Pashto, Pushto 8083 Turkish  
Bulgarian  
Burmese  
Byelorussian  
Chinese  
Croatian  
Czech  
7365 Persian  
7165 Polish  
7065 Turkmen  
8076 Twi  
6669 Italian  
7384 Portuguese  
7465 Quechua  
7578 Rhaeto-Romance  
7583  
8084 Ukrainian  
8185 Urdu  
Uzbek  
9072 Japanese  
7282 Kannada  
6783 Kashmiri  
6865 Kazakh  
8277  
Vietnamese  
7
Rumanian  
8279  
Danish  
7575  
Volapük  
Russian  
7589  
8285  
Dutch  
7876 Kirghiz  
Welsh  
Samoan  
8377  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
6978 Korean  
7579  
Wolof  
Sanskrit  
7585  
8365  
6979 Kurdish  
6984 Laothian  
7079 Latin  
Xhosa  
Scots Gaelic  
7168  
7679  
Yiddish  
Serbian  
7665  
8382  
Yoruba  
Serbo-Croatian 8372  
Shona 8378  
7074 Latvian, Lettish 7686  
Zulu  
Finnish  
7073 Lingala  
7678  
BD561-N-BCANLLK-ENG.indd 65  
2010.1.22 8:31:55 PM  
66  
Appendix  
Trademarks and  
Licenses  
“AVCHDand theAVCHDlogo are trademarks of  
Panasonic Corporation and Sony Corporation.  
This product is licensed under the AVC patent  
portfolio license and VC-1 patent portfolio license  
for the personal and non-commercial use of a  
consumer to (i) encode video in compliance with  
the AVC Standard and VC-1 Standard (“AVC/VC-1  
Video”) and/or (ii) decode AVC/VC-1 Video that was  
encoded by a consumer engaged in a personal and  
non-commercial activity and/or was obtained from  
a video provider licensed to provide AVC/VC-1 Video.  
No license is granted or shall be implied for any other  
use. Additional information may be obtained from  
“Blu-ray Discis a trademark.  
“BD-LIVElogo is a trademark of Blu-ray Disc  
Association.  
“BONUSVIEWis trademark of Blu-ray Disc  
Association.  
YouTube™ is a trademark of Google Inc.  
Java and all Java-based trademarks and logos  
are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and other  
countries.  
Picasa™ Web Albums is a trademark of Google Inc.  
Manufactured under license under U.S. Patent #’s:  
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;  
6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 &  
other U.S. and worldwide patents issued & pending. DTS  
is a registered trademark and the DTS logos, Symbol,  
DTS-HD and DTS-HD Master Audio are trademarks of  
DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of  
Dolby Laboratories.  
7
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI licensing LLC.  
DivX is a registered trademark of DivX, Inc., and is  
used under license.  
“x.v.Colouris a trademark of Sony Corporation.  
“DVD Logois a trademark of DVD Format/Logo  
Licensing Corporation.  
BD561-N-BCANLLK-ENG.indd 66  
2010.1.22 8:31:55 PM  
Appendix  
67  
payment to you for any information that you provide.  
You agree that Gracenote, Inc. may enforce its rights  
under this Agreement against you directly in its own  
name.  
On the LG products, an innovative power  
consumption system in stand-by mode is built.  
Therefore, the small amounts of electricity  
areconsumed even though the power plug is  
inserted.  
The Gracenote service uses a unique identifier to  
track queries for statistical purposes. The purpose of  
a randomly assigned numeric identifier is to allow  
the Gracenote service to count queries without  
knowing anything about who you are. For more  
information, see the web page for the Gracenote  
Privacy Policy for the Gracenote service.  
The Gracenote Software and each item of Gracenote  
Data are licensed to youAS IS.” Gracenote makes  
no representations or warranties, express or implied,  
regarding the accuracy of any Gracenote Data from  
in the Gracenote Servers. Gracenote reserves the  
right to delete data from the Gracenote Servers or to  
change data categories for any cause that Gracenote  
deems sufficient. No warranty is made that the  
Gracenote Software or Gracenote Servers are error-  
free or that functioning of Gracenote Software or  
Gracenote Servers will be uninterrupted. Gracenote  
is not obligated to provide you with new enhanced  
or additional data types or categories that Gracenote  
may provide in the future and is free to discontinue  
its services at any time.  
Gracenote®, Gracenote logo and logotype, and the  
“Powered by Gracenotelogo are either registered  
trademarks or trademarks of Gracenote, Inc. in the  
United States and/or other countries.  
Music recognition technology and related data are  
provided by Gracenote®.  
Gracenote® End User License Agreement  
This application or device contains software from  
Gracenote, Inc. of Emeryville, California  
(“Gracenote”). The software from Gracenote (the  
“Gracenote Software”) enables this application to  
perform disc and/or file identification and obtain  
music-related information, including name, artist,  
track, and title information (“Gracenote Data”) from  
online servers or embedded databases (collectively,  
“Gracenote Servers”) and to perform other functions.  
You may use Gracenote Data only by means of the  
intended End-User functions of this application or  
device.  
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS  
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,  
IMPLIED WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND  
NON-INFRINGEMENT. GRACENOTE DOES NOT  
WARRANT THE RESULTS THAT WILL BE OBTAINED BY  
YOUR USE OF THE GRACENOTE SOFTWARE OR ANY  
GRACENOTE SERVER. IN NO CASE WILL GRACENOTE  
BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL  
DAMAGES OR FOR ANY LOST PROFITS OR LOST  
REVENUES.  
You agree that you will use Gracenote Data, the  
Gracenote Software, and Gracenote Servers for  
your own personal non-commercial use only. You  
agree not to assign, copy, transfer or transmit the  
Gracenote Software or any Gracenote Data to any  
third party. YOU AGREE NOT TO USE OR EXPLOIT  
GRACENOTE DATA, THE GRACENOTE SOFTWARE,  
OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY  
PERMITTED HEREIN.  
© Gracenote, Inc. 2009  
7
You agree that your non-exclusive license to use  
the Gracenote Data, the Gracenote Software, and  
Gracenote Servers will terminate if you violate  
these restrictions. If your license terminates, you  
agree to cease any and all use of the Gracenote  
Data, the Gracenote Software, and Gracenote  
Servers. Gracenote reserves all rights in Gracenote  
Data, the Gracenote Software, and the Gracenote  
Servers, including all ownership rights. Under no  
circumstances will Gracenote become liable for any  
BD561-N-BCANLLK-ENG.indd 67  
2010.1.22 8:31:56 PM  
68  
Appendix  
Audio Output  
Specifications  
4
Jack/Setting  
Analog  
Digital Output (DIGITAL AUDIO OUT)  
*
DTS Re-encode*3 *5  
2CH Output  
Source  
PCM Stereo  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
Primary Pass-Thru  
Dolby Digital  
Dolby Digital  
Dolby Digital  
DTS  
Dolby Digital  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS-HD  
DTS  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
Jack/Setting  
Source  
HDMI OUT  
DTS Re-encode*3 *5 Primary Pass-Thru *1 *2 *3  
3
PCM Stereo  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM Multi-Ch  
PCM 5.1ch  
PCM 5.1ch  
PCM 5.1ch  
PCM 5.1ch  
PCM 7.1ch  
PCM 2ch  
*
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS-HD  
DTS-HD  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
PCM 5.1ch  
PCM 7.1ch  
*1 The secondary and interactive audio may  
not be included in the output bitstream if  
[Digital Output] or [HDMI] option is set to  
[Primary Pass-Thru]. (Except LPCM Codec :  
the output always includes interactive and  
secondary audio.)  
*3 The [PCM Multi-CH]/[Primary Pass-Thru]  
setting of the [HDMI] option and [DTS re-  
encode] setting of the [Digital Output]  
option cannot be set together. If you set  
them together, the [HDMI] or [Digital  
Output] option is set to [PCM Stereo]  
automatically.  
7
*2 This player automatically selects the HDMI  
audio according to the decoding capability  
of the connected HDMI device even though  
[HDMI] option is set to [Primary Pass-Thru].  
*4 On the PCM audio output, the sampling  
frequency of DIGITAL AUDIO OUT is limited  
to 96 kHz.  
BD561-N-BCANLLK-ENG.indd 68  
2010.1.22 8:31:56 PM  
Appendix  
69  
*5 If the [HDMI] or [Digital Output] option is  
set to [DTS re-encode], the audio output is  
limited to 48 kHz and 5.1Ch. If the [HDMI]  
or [Digital Output] option is set to [DTS  
re-encode], the DTS Re-encode audio is  
output for BD-ROM discs, and the original  
audio is output for the other discs (like  
[Primary Pass-Thru]).  
Multi-channel Digital Surround Sound via  
digital connection can only be obtained  
if your receiver is equipped with a Digital  
Multi-channel decoder.  
If [HDMI] option is set to [PCM Multi-CH]  
and [Digital Output] option is set to [Primary  
Pass-Thru] while playback Dolby Digital Plus  
or TrueHD audio, DIGITAL AUDIO OUT is  
limited toPCM 2ch.  
If the HDMI connection is version 1.3 and  
Dolby Digital Plus/Dolby TrueHD is output  
from HDMI OUT jack, DIGITAL AUDIO OUT  
jack is limited toPCM 2ch(When the HDMI  
and DIGITAL AUDIO OUT are connected  
simultaneously).  
The audio is outputted as PCM 48 kHz/  
16 bit for MP3/WMA file and PCM  
44.1 kHz/16 bit for Audio CD while playback.  
The Dolby TrueHD audio recorded on some  
Blu-ray discs consists of Dolby Digital and  
TrueHD audio. Dolby Digital audio is output  
through DIGITAL AUDIO OUT jacks andDD  
displays on the screen if TrueHD audio is  
not output (for example, when [HDMI] is set  
to [PCM Stereo] and [Digital Output] is set  
to [Primary Pass-Thru]).  
You must select a digital audio output and  
a maximum sampling frequency that your  
Amplifier (or AV receiver) accepts using  
[Digital Output], [HDMI] and [Sampling  
Freq.] options on the [Setup] menu (see  
page 27).  
7
With digital audio connection (DIGITAL  
AUDIO OUT or HDMI), Disc Menu button  
sounds of BD-ROM may not be heard if the  
[Digital Output] or [HDMI] option is set to  
[Primary Pass-Thru].  
If the audio format of the digital output  
does not match the capabilities of your  
receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
BD561-N-BCANLLK-ENG.indd 69  
2010.1.22 8:31:56 PM  
70  
Appendix  
Video Output  
Resolution  
When the non-copy protected media is playing back  
Video Out  
HDMI OUT  
COMPONENT VIDEO OUT  
HDMI connected HDMI disconnected  
Resolution  
480i  
480p  
720p  
1080i  
480p  
480p  
480i  
480p  
720p  
1080i  
720p  
1080i  
1080p /24 Hz  
1080p / 60 Hz  
1080p / 24 Hz  
1080p / 60 Hz  
480i  
480i  
1080i  
1080i  
When the copy protected media is playing back  
Video Out  
HDMI OUT  
COMPONENT VIDEO OUT  
HDMI connected  
HDMI disconnected  
Resolution  
480i  
480p  
720p  
1080i  
480p  
480p  
480i  
480p  
720p  
480i  
480i  
480i  
480i  
480p  
480p  
480p  
480p  
1080i  
1080p /24 Hz  
1080p / 60 Hz  
1080p / 24 Hz  
1080p / 60 Hz  
The 1080p video output frame rate may  
be automatically set to either 24 Hz or  
60 Hz depending both on the capability  
and preference of the connected TV and  
based on the native video frame rate of the  
content on the BD-ROM disc.  
HDMI OUT connection  
If you select a resolution manually and then  
connect the HDMI jack to TV and your TV  
does not accept it, the resolution setting is  
set to [Auto].  
If you select a resolution that your TV  
does not accept, the warning message  
will appear. After resolution change,  
if you cannot see the screen, please  
wait 20 seconds and the resolution will  
automatically revert back to the previous  
resolution.  
7
COMPONENT VIDEO OUT  
Connection  
BD and DVD video stream could prevent up-  
scaling on analog output.  
VIDEO OUT connection  
The resolution of the VIDEO OUT jack is always  
output at 480i resolution.  
BD561-N-BCANLLK-ENG.indd 70  
2010.1.22 8:31:56 PM  
Appendix  
71  
System  
Specifications  
Laser:  
Semiconductor laser  
405 nm / 650 nm  
General  
wavelength:  
Power requirements:  
AC 120 V ~, 60 Hz  
20 W  
Signal system:  
Standard NTSC colour TV system  
Power consumption:  
Frequency response:  
20 Hz to 20 kHz  
(48 kHz, 96 kHz, 192 kHz sampling)  
Dimensions (W x H x D):  
Approx. 430 x 44 x 204 mm without foot  
Signal-to-noise ratio:  
Net Weight (Approx.):  
More than 100 dB  
2 kg  
(ANALOG OUT connectors only)  
Operating temperature:  
Harmonic distortion:  
5 °C to 35 °C  
Less than 0.008 %  
More than 95 dB  
Operating humidity:  
Dynamic range:  
LAN port:  
5 % to 90 %  
Outputs  
Ethernet jack x 1, 10BASE-T/100BASE-TX  
Bus Power Supply (USB):  
VIDEO OUT:  
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1  
DC 5 V 500 mA  
COMPONENT VIDEO OUT:  
(Y) 1.0 V (p-p), 75 Ω, sync negative,  
RCA jack x 1,  
Design and specifications are subject to  
change without notice.  
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2  
HDMI OUT (video/audio):  
19 pin (HDMI standard, Type A), Version 1.3  
7
ANALOG AUDIO OUT:  
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1  
DIGITAL OUT (COAXIAL):  
0.5 V (p-p), 75 Ω, RCA jack x 1  
BD561-N-BCANLLK-ENG.indd 71  
2010.1.22 8:31:57 PM  
72  
Appendix  
UNDER NO CIRCUMSTANCES AND UNDER NO  
LEGAL THEORY, WHETHER IN CONTRACT, TORT,  
STRICT LIABILITY OR OTHERWISE, SHALL LG BE  
LIABLE TO YOU OR ANY THIRD PARTY FOR ANY  
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, STATUTORY,  
CONSEQUENTIAL OR OTHER DAMAGES OR  
ATTORNEY FEES OR EXPENSES RELATING TO OR  
ARISING OUT OF THE NETWORK SERVICES EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR  
IF SUCH DAMAGES COULD HAVE BEEN REASONABLY  
FORESEEN.  
Important Information  
Relating to Network  
Services  
PLEASE READ CAREFULLY. USE OF THE NETWORK  
SERVICES IS SUBJECT TO THE FOLLOWING TERMS  
AND CONDITIONS.  
The Network Services may be terminated or  
interrupted at any time, and LG makes no  
Use of the Network Services requires an Internet  
connection which is sold separately and for which  
you are solely responsible. The Network Services may  
be limited or restricted depending upon the quality,  
capabilities and technical limitations of your Internet  
service.  
representation or warranty that any Network Service  
will remain available for any period of time. Use of the  
Network Services may be subject to additional terms  
and conditions of the respective third party service  
provider. The Network Services are transmitted by  
third parties by means of networks and transmission  
facilities over which LG has no control. LG EXPRESSLY  
DISCLAIMS ANY RESPONSIBILITY OR LIABILITY  
FOR ANY INTERRUPTION OR SUSPENSION OF ANY  
NETWORK SERVICE.  
The Network Services belong to third parties and  
may be protected by copyright, patent, trademark  
and/or other intellectual property laws. The Network  
Services are provided solely for your personal and  
noncommercial use. Unless expressly authorized by  
the respective content owner or service provider,  
you shall not modify, copy, republish, upload, post,  
transmit, translate, sell, create derivative works,  
exploit, or distribute in any manner or medium any  
content or services accessible through this product.  
LG shall be neither responsible nor liable for  
customer service related to the Network Services.  
Any question or request should be made directly to  
the respective Network Service providers.  
“Network Service(s)means the third party services  
accessible through this product including but  
not limited to all data, software, links, messages,  
video and other content found thereon or used in  
connection therewith.  
LG IS NOT RESPONSIBLE FOR YOUR USE OF  
THE NETWORK SERVICES. THE NETWORK  
SERVICES ARE PROVIDEDAS IS.TO THE FULLEST  
EXTENT PERMISSIBLE BY LAW, LG MAKES NO  
REPRESENTATIONS OR WARRANTIES OF ANY KIND  
WHATSOEVER (i) FOR THE ACCURACY, VALIDITY,  
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY  
NETWORK SERVICE MADE AVAILABLE THROUGH  
THIS PRODUCT; OR (ii) THAT THE NETWORK SERVICES  
ARE FREE OF VIRUSES OR OTHER COMPONENTS  
THAT MAY INFECT, HARM, OR CAUSE DAMAGE TO  
THIS PRODUCT, YOUR COMPUTER, TELEVISION,  
OTHER EQUIPMENT, OR ANY OTHER PROPERTY. LG  
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,  
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE.  
“LGmeans LG Electronics, Inc. its parent company  
and all of their respective subsidiaries, affiliates and  
related companies worldwide.  
7
BD561-N-BCANLLK-ENG.indd 72  
2010.1.22 8:31:57 PM  
Appendix  
73  
OpenSSL:  
Open source software  
notice  
cryptographic software written by Eric Young  
software written by Tim Hudson  
software developed by the OpenSSL Project  
for use in the OpenSSL Toolkit.  
(http://www.openssl.org)  
The following GPL executables and LGPL libraries  
used in this product are subject to the GPL2.0/  
LGPL2.1 License Agreements:  
png: copyright © 2004 Glenn Randers-Pehrson  
portmap : copyright © 1990 The Regents of the  
University of California  
ptmalloc : copyright © 2001-2006 Wolfram Gloger  
UnitTest++ : copyright © 2006 Noel Llopis and  
Charles Nicholson  
UPnP SDK : copyright © 2000-2003 Intel  
Corporation  
strace :  
GPL EXECUTABLES: Linux kernel 2.6, bash, busybox,  
cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils,  
net-tools, procps, samba-3.0.25b, sysutils, tcpdump,  
tftpd, tinylogin, unzip, utelnetd  
LGPL LIBRARIES: uClibc, DirectFB, blowfish, cairo,  
ffmpeg, iconv, libusb, mpg123  
copyright © 1991, 1992 Paul Kranenburg  
copyright © 1993 Branko Lankester  
copyright © 1993 Ulrich Pegelow  
copyright © 1995, 1996 Michael Elizabeth Chastain  
copyright © 1993, 1994, 1995, 1996 Rick Sladkey  
copyright © 1999,2000 Wichert Akkerman  
xml2 : copyright © 1998-2003 Daniel Veillard  
XML-RPC For C/C++:  
gSOAP Public License 1.3 LIBRARY: gsoap  
LG El ectronics offers to provide source code to  
you on CD-ROM for a charge covering the cost of  
performing such distribution, such as the cost of  
media, shipping and handling upon e-mail request  
to LG Electronics at: [email protected]  
This offer is valid for a period of three(3) years from  
the date of the distribution of this product by LG  
Electronics.  
copyright © 2001 by First Peer, Inc. All rights  
reserved.  
You can obtain a copy of the GPL, LGPL licenses  
licenses/lgpl-2.1.html .  
copyright © 2001 by Eric Kidd. All rights reserved.  
zlib: copyright © 1995-2002 Jean-loup Gailly and  
Mark Adler.  
All rights reserved.  
Also you can obtain a copy of gSOAP public license  
Permission is hereby granted, free of charge, to  
any person obtaining a copy of this software and  
associated documentation files (theSoftware”), to  
deal in the Software without restriction, including  
without limitation the rights to use, copy, modify,  
merge, publish, distribute, sublicense, and/or sell  
copies of the Software, and to permit persons to  
whom the Software is furnished to do so, subject to  
the following conditions:  
This software is based in part on the work of the  
Independent JPEG Group copyright © 1991 - 1998,  
Thomas G. Lane.  
This product includes  
boost C++: copyright © Beman Dawes 1999-2003  
c-ares : copyright © 1998 by the Massachusetts  
Institute of Technology  
7
curl: copyright © 1996 - 2008, Daniel Stenberg  
expat: copyright © 2006 expat maintainers  
freetype: copyright © 2003 The FreeType Project  
(www.freetype.org).  
jpeg: This software is based in part on the work of  
the Independent JPEG Group copyright © 1991 –  
1998, Thomas G. Lane.  
mng: copyright © 2000-2007 Gerard Juyn, Glenn  
Randers-Pehrson  
ntp : copyright © David L. Mills 1992-2006  
THE SOFTWARE IS PROVIDEDAS IS, WITHOUT  
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,  
INCLUDING BUT NOT LIMITED TO THE WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT. IN NO EVENT  
SHALL THE AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER  
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,  
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN  
CONNECTION WITH THE SOFTWARE OR THE USE OR  
OTHER DEALINGS IN THE SOFTWARE.  
BD561-N-BCANLLK-ENG.indd 73  
2010.1.22 8:31:57 PM  
As an ENERGY STAR® Partner, LG has  
determined that this product or  
product models meet the ENERGY STAR  
® guidelines for energy efficiency.  
LG Customer Information Center  
CANADA  
1-888-542-2623  
®
ENERGY STAR is a U.S. registered mark.  
BD561-N-BCANLLK-ENG.indd 74  
2010.1.22 8:31:57 PM  

Pyramid Car Audio PB881X User Manual
Pioneer Car Stereo System DEH 2350UBSW User Manual
Philips GoGear LUXE SA2447BT User Manual
Oster Blender PN 133093 004 User Manual
Olympus Digital Camera E 5 User Manual
Nikon Digital Cameras User Manual
Lexicon DD 8 User Manual
Kenwood KDC C669 User Manual
JVC KD AR7500 User Manual
JVC High Definition Camcorder GZ E200 User Manual