Kenwood KVT 737DVD User Manual

MONITOR WITH DVD RECEIVER  
KVT-737DVD  
KVT-747DVD  
KVT-767DVD  
INSTRUCTION MANUAL  
© B64-3111-00/00 (MV/XV/VV)  
Source Select.............................................. 44  
Displaying the Control screen  
Sound Effects Menu................................... 64  
Sound Effects Menu .............................................64  
Displaying the Control screen  
Displaying the Source Select screen  
Displaying the Sound Effects Menu screen  
Adjusting the Monitor Display Position  
and Quality............................................. 45  
Displaying the Screen Control screen  
Audio Control ........................................................65  
Displaying the Audio Control 1 screen  
Displaying the Audio Control 2 screen  
Displaying the Angle Control screen  
Equalizer ................................................................66  
Displaying the Equalizer screen  
Tone curve setup  
Setup Menu................................................ 46  
Setup Menu............................................................46  
Displaying the Control screen  
Zone Control .........................................................68  
Displaying the Zone Control screen  
Displaying the Setup Menu screen  
Audio Set Up .........................................................47  
Displaying the Audio Set Up screen  
Crossover Network Setup  
Muting Audio Volume upon Reception of  
Phone call ............................................... 69  
Muting Audio Volume upon Reception of Phone  
call  
DVD Setup .............................................................49  
Displaying the DVD SETUP 1 screen  
Displaying the DVD SETUP 2 screen  
Displaying the DVD SETUP 3 screen  
Language Setup  
Glossary...................................................... 70  
Troubleshooting Guide ............................. 71  
Specifications ........................................... 75  
Parental Level Setup  
System Setup ........................................................53  
Displaying the System 1 screen  
Displaying the System 2 screen  
AV Interface ...........................................................54  
Displaying the AV I/F 1 screen  
Displaying the AV I/F 2 screen  
Displaying the AV I/F 3 screen  
User Interface ........................................................56  
Displaying the User I/F 1 screen  
Displaying the User I/F 2 screen  
Touch Panel Adjustment  
Clock  
Security Code Setup  
Set Up Memory  
TV Setup .................................................................61  
Displaying the TV1 Area Set screen  
Displaying the TV2 Area Set screen  
RDS Setup...............................................................62  
Displaying the RDS Set UP1 screen  
Displaying the RDS Set UP2 screen  
AMP Control...........................................................63  
Displaying the AMP Control screen  
|
English  
3
Before Use  
Audio units you can control from the  
KVT-737DVD/KVT-747DVD/KVT-767DVD  
Receiver (As of June, 2005):  
KTC-V500P, KTC-V500N, KHD-C710, KDC-CPS89MP, KDC-CPS87,  
KDC-CPS85, KDC-CPS82, KDC-C719, KDC-C717, KDC-C715,  
KDC-C712, KDC-C669, KDC-C667, KDC-C665, KDC-C662,  
KDC-C469, KDC-C462, KDV-C830, KDV-C840,  
2WARNING  
To prevent injury or fire, take the following  
precautions:  
To prevent a short circuit, never put or leave any metallic  
objects (such as coins or metal tools) inside the unit.  
Do not touch the liquid crystal fluid if the LCD is damaged  
or broken due to shock. The liquid crystal fluid may be  
dangerous to your health or even fatal.  
KDV-C860, KDC-D301, KDC-D300, KMD-D400, KDC-CMP21V  
(Set the "O-N" switch to "N" position if provided.)  
If the liquid crystal fluid from the LCD contacts your body or  
clothing, wash it off with soap immediately.  
Navigation units you can control from the  
KVT-737DVD/KVT-747DVD/KVT-767DVD  
Receiver (As of June, 2005): KNA-DV2600  
2CAUTION  
To prevent damage to the machine, take  
the following precautions:  
Loading and Replacing the  
battery  
1. Use two "R03"/"AAA"-size batteries.  
Slide the cover while pressing  
downwards to remove it as  
illustrated.  
Make sure to ground the unit to a negative 12V DC power  
supply.  
Do not install the unit in a spot exposed to direct sunlight  
or excessive heat or humidity. Also avoid places with too  
much dust or the possibility of water splashing.  
2. Insert the batteries with the + and  
- poles aligned properly, following  
the illustration inside the case.  
Do not place the faceplate or the faceplate case in areas  
exposed to direct sunlight, excessive heat or humidity. Also  
avoid places with too much dust or the possibility of water  
splashing.  
To prevent deterioration, do not touch the terminals of the  
unit or faceplate with your fingers.  
Do not subject the faceplate to excessive shock, as it is a  
piece of precision equipment.  
When replacing a fuse, only use a new fuse with the  
prescribed rating. Using a fuse with the wrong rating may  
cause your unit to malfunction.  
2WARNING  
Store unused batteries out of the reach of children. Contact a  
doctor immediately if the battery is accidentally swallowed.  
Do not set the remote control on hot places such as above the  
dashboard.  
Do not use your own screws. Use only the screws provided.  
If you use the wrong screws, you could damage the unit.  
You cannot view video pictures whilst the vehicle is moving.  
To enjoy TV/video pictures, find a safe place to park and  
engage the parking brake.  
The provided batteries are intended for use in operation  
checking, and their service life may be short.  
When the remote controllable distance becomes short, replace  
both of the batteries with new ones.  
NOTE  
Cleaning the panel and monitor  
If you experience problems during installation, consult your  
Kenwood dealer.  
If the unit fails to operate properly, press the Reset button  
to restore factory settings.  
When the operator panel and monitor panels are dirty, wipe  
and clean them using a soft cloth (such as a commercially  
available silicon coated cloth). When contaminated  
excessively, clean them using a cloth dipped in a neutral  
detergent first, then remove the detergent using a dry cloth.  
Do not use a hard cloth and a volatile chemical (such as  
an alcohol). If used, the panel surface may be scratched or  
printed letters may be erased.  
OPEN/CLOSE  
ATT  
DISP  
Cleaning the disc slot  
Reset button  
As dust can accumulate in the disc slot, clean it occasionally.  
Your discs can get scratched if you put them in a dusty disc  
slot.  
Screen brightness during low temperatures  
When the temperature of the unit falls such as during winter,  
the liquid crystal panel's screen will become darker than usual.  
Normal brightness will return after using the monitor for a  
whilst.  
Lens Fogging  
Right after you turn on the car heater in cold weather, dew  
or condensation may form on the lens in the disc player of  
the unit. Called lens fogging, discs may be impossible to  
play. In such a situation, remove the disc and wait for the  
condensation to evaporate. If the unit still does not operate  
normally after a whilst, consult your Kenwood dealer.  
|
4
English  
Region codes in the world  
The DVD players are given a region code according to the country or area it is marketed, as shown in the following map.  
1
5
2
1
2
1
4
5
2
4
Icons on the DVD discs  
Icon  
Description  
Indicates the region code where the disc can be played.  
Number of voice languages recorded with the audio function. The number in the icon indicates the number  
of voice languages. (Max. 8 languages)  
8
Number of subtitle languages recorded with the subtitle function. The number in the icon indicates the  
number of subtitle languages. (Max. 32 languages)  
32  
Number of angles provided by the angle function. The number in the icon indicates the number of angles.  
(Max. 9 angles)  
9
Aspect ratios that can be selected. "LB" stands for Letter Box and "PS" for Pan/Scan. In the example on the left,  
the 16:9 video can be converted into letter box video.  
16:9 LB  
Unplayable discs  
This player cannot play back any of the following discs.  
• DVD-ROM/DVD-RAM discs  
• HQ-VCD/SVCD discs  
• CDV discs (Only the audio part can be reproduced)  
• Photo CD discs  
• CD-G/CD-EG/CD-EXTRA discs (Only the audio can be reproduced)  
• DVD-Audio  
Also, you cannot play back the DVD-R/RW and DVD+R/RW discs if not recorded in the DVD-Video format.  
Explanation of icons used on this manual  
Restrictions due to difference between discs  
Some DVD and VCD discs can be played  
Inhibition  
icon  
Indicates the key operation on the receiver.  
Indicates the button you must touch.  
only in certain playback modes according  
to the intentions of the software producers.  
As this player plays discs according to their  
intentions, some functions may not work as  
intended by you. Please be sure to read the  
instructions provided with each disc. When an  
inhibition icon is displayed on the monitor, it  
indicates that the disc being played is under  
the restriction as described above.  
Indicates the key or joystick operation on the  
remote controller.  
The initial value of each setup is shown.  
Gives an additional information or an operation  
advice.  
The illustrations of the display and the panel appearing  
in this manual are examples used to explain more clearly  
how the controls are used. Therefore, what appears on the  
display in the illustrations may differ from what appears  
on the display on the actual equipment, and some of  
the illustrations on the display may represent something  
impossible in actual operation.  
Time is displayed on each control screen in the 12-hour  
clock display type (with AM/PM displayed) or in the  
24 hour clock display type (without AM/PM displayed)  
depending on the sales area. The display type cannot be  
changed. In this instruction manual, screens of the 24-hour  
display type are used as examples.  
|
English  
5
Notes on playing MP3/WMA/JPEG/MPEG  
This unit can play MP3 (MPEG1 Audio Layer 3)/  
WMA/JPEG/MPEG (MPEG 1/MPEG 2). Note, however,  
Play mode may not be possible when portions of the functions  
that the MP3/WMA/JPEG/MPEG recording media  
and formats acceptable are limited. When writing  
MP3/WMA/JPEG/MPEG, pay attention to the  
following restrictions.  
of Windows Media Player 9 or higher are used.  
*1 A part of picture will not be displayed if the size of a picture  
exceeds maximum.  
*2 A picture will not be displayed if the size of a picture exceeds  
maximum.  
Acceptable media  
When you write for MPEG 2 data, please be sure to use DVD  
media.  
When you write data in DVD media, please be sure to set a setup  
of a DVD writer to "Disc at once".  
The MP3/WMA/JPEG/MPEG recording media acceptable to  
this unit are CD-ROM, CD-R, CD-RW,DVD-R/RW and DVD+R/  
RW.  
When using CD-RW, do full format not quick format to prevent  
malfunction.  
Entering ID3 tag  
The Displayable ID3 tag is ID3 version 1.x.  
For the character code, refer to the List of Codes.  
Acceptable medium formats  
The following formats are available for the media used in this  
unit. The maximum number of characters used for file name  
including the delimiter (".") and three-character extension are  
indicated in parentheses.  
• ISO 9660 Level 1 (12 characters)  
• ISO 9660 Level 2 (31 characters)  
• Joliet (64 characters)  
• Romeo (128 characters)  
Up to 200 characters can be displayed in the long file name  
format. For a list of available characters, see the instruction  
manual of the writing software and the section Entering file  
and folder names below.  
The media reproducible on this unit has the following  
limitations:  
• Maximum number of directory levels: 8  
• Maximum number of files per folder: 255  
• Maximum number of characters for folder name: 200  
• Maximum number of folders: 254  
MP3/WMA/JPEG/MPEG written in the formats other than the  
above may not be successfully played and their file names or  
folder names are not properly displayed.  
Entering file and folder names  
You can use only characters shown on the code table for file  
name and folder name.  
If you use any other character for entry, the file and folder  
names are not displayed correctly. They may neither be  
displayed correctly depending on the CD/DVD writer used.  
The MP3/WMA/JPEG/MPEG file must have the MP3/WMA/  
JPEG/MPEG extension (.mp3/.wma/.jpg/.mpg).  
Settings for your MP3/WMA/JPEG/MPEG encoder  
and CD/DVD writer  
Do the following setting when compressing audio data in  
MP3/WMA data with the MP3/WMA encoder.  
MP3/WMA  
• Transfer bit rate: MP3: 32 —320 kbps  
WMA: 48 —192 kbps  
• Sampling frequency: MP3: 32, 44.1, 48 kHz  
WMA: 32, 44.1, 48 kHz  
A file with a name entered with characters not on the code list  
may not play correctly.  
Writing files into a medium  
When a medium containing MP3/WMA/JPEG/MPEG data is  
loaded, the unit checks all the data on the medium. If the  
medium contains a lot of folders or non-MP3/WMA/JPEG/  
MPEG files, therefore, it takes a long time until the unit starts  
playing MP3/WMA/JPEG/MPEG.  
In addition, it may take time for the unit to move to the next  
MP3/WMA/JPEG/MPEG file or a File Search or Folder Search  
may not be performed smoothly.  
Do the following setting when compressing video/audio data  
in JPEG/MPEG data with the JPEG/MPEG encoder.  
JPEG  
• Picture size: Baseline format: 5,120 (W) x 3,840 (H) pixels  
(Maximum size)*1  
Progressive format: 2,048 (W) x 1,536 (H) pixels  
Loading such a medium may produce loud noise to damage the  
speakers.  
(Maximum size)*2  
MPEG  
Do no attempt to play a medium containing a non-MP3/WMA/  
JPEG/MPEG file with the MP3/WMA/JPEG/MPEG extension.  
The unit mistakes non-MP3/WMA/JPEG/MPEG files for MP3/  
WMA/JPEG/MPEG data as long as they have the MP3/WMA/  
JPEG/MPEG extension.  
Do not attempt to play a medium containing non MP3/WMA/  
JPEG/MPEG.  
• Video format: MPEG1, MPEG2  
• Picture size: MPEG1: 320x240, 352x240 (NTSC), 352x288 (PAL)  
MPEG2: 640x480, 704x480 (NTSC), 704x576 (PAL)  
• Audio format: MPEG1 Audio Layer2  
• Transfer bit rate: 32—384 kbps CBR  
• Sampling frequency: 32, 44.1,48 kHz  
When you use your CD/DVD writer to record MP3/WMA/JPEG/  
MPEG up to the maximum disc capacity, disable additional  
writing. For recording on an empty disc up to the maximum  
capacity at once, check Disc at Once.  
|
6
English  
MP3/WMA/JPEG/MPEG playing order  
When selected for play, Folder Search, File Search, or for Folder  
Select, files and folders are accessed in the order in which they  
were written by the CD/DVD writer.  
Because of this, the order in which they are expected to be  
played may not match the order in which they are actually  
played. You may be able to set the order in which MP3/WMA/  
JPEG/MPEG are to be played by writing them onto a medium  
such as a CD-R with their file names beginning with play  
sequence numbers such as "01" to "99", depending on your  
CD/DVD writer.  
JPEG  
JPEG is a standardized image compression mecha-  
nism. JPEG stands for Joint Photographic Experts  
Group, the original name of the committee that  
wrote the standard. JPEG is designed for compress-  
ing either full color or gray scale images.  
MPEG 1  
The most common implementations of the MPEG  
1 standard provide a video resolution of 352-by-  
240 at 30 frames per second (fps). This produces  
video quality slightly below the quality of conven-  
tional VCR videos.  
MPEG 2  
MPEG 2 offers resolutions of 720x480 and  
1280x720 at 60 fps (NTSC), with full CD-quality  
audio. This is sufficient for all the major TV stan-  
dards, including NTSC, and even PAL. MPEG 2 is  
used by DVD-ROMs. MPEG-2 can compress a 2-  
hour video into a few gigabytes.  
|
English  
7
Opening/Closing the Monitor and Power Switch  
Open the monitor  
[OPEN/CLOSE] key  
Close the monitor  
Turn the power on  
Hold down the [SRC] key more than  
one second to turn it off.  
[SRC] key  
Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components,  
you may be hurt or the equipment may be damaged.  
Do not try to open or close the monitor by hand.  
You can automatically open or close the monitor when you turn on or off the ignition key (page 45).  
If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement is  
canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also canceled  
by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] key again.  
|
8
English  
Removing/Attaching the Protection Panel  
Remove the protection panel  
Attach the protection panel  
Two hooks  
Place the right end of the protection panel onto  
hooks and push it until clicked and locked.  
Then, push the left end of the panel to lock it.  
Close the monitor first, then remove or attach the protection panel.  
After you have removed the protection panel, you cannot operate the receiver.  
After you have removed the protection panel, you can flash the burglar alarm lamp (page 58).  
|
English  
9
KVT-737DVD/747DVD/767DVD Basic operations  
When the monitor is open  
SCRN MODE M.CTRL V.SEL V.OFF  
FNC AV OUT SEL  
S
M
V
F
OPEN/CLOSE  
ATT  
DISP  
When the monitor is closed  
OPEN/CLOSE  
ATT  
DISP  
1
2
3
Play Disc  
[Disc insertion slot]  
A disc is played when you insert it.  
4
5
6
Search Selectors  
[22]/[33] key  
Searches a disc backward or forward.  
Stop to Play  
[7] key  
Stops to play.  
Eject Disc  
[0] key  
The disc is ejected.  
Play/Pause  
[38] key  
Pauses and replays a disc.  
Video source selection/V.OFF  
[V.SEL]key  
Video source selection changes in the following order  
each time you press the key.  
|
10  
English  
Band/Folder Selectors  
[FM]/[AM] key  
[FM] key switches to the FM1/2/3 band or next folder/  
disc.  
DVD/VCD  
TV */ Video  
R-CAM *  
[AM] key switches to the AM band or previous folder/  
disc.  
p
Attenuater  
[ATT] key  
Attenuaters the volume.  
Press it again to cancel muting.  
Navigation *  
* Optional accessory  
Traffic Information (KVT-737DVD only)  
[TI] key  
Hold down more than 1 second to turn the Traffic  
Information function On or Off. (page 36)  
You can also turn off the video display by pressing the  
key longer than 1 second.  
When you press the key again, the previous video  
display comes back on.  
q
w
Screen Setup  
[SCREEN] key  
Displays the Screen Setup or Angle Setup screen.  
(page 45)  
7 Audio Source Selection/Power Supply  
[SRC] key  
Audio source selection changes in the following order  
each time you press the key.  
Function/AV OUT SEL  
[FNC] key  
The video source function changes in the following  
order each time you press the key.  
TUNER  
Picture & Easy Control Panel  
Source Control  
Built-in Disc player  
External Disc player *  
TV */ Video  
Picture  
External Disc Changer *  
AUX EXT *  
Switches the source that is output at the AV OUTPUT  
terminal when it is pressed more than 1 second.  
e
Switch Screen Mode/M.CTRL  
[MODE] key  
Navigation *  
Switches the screen mode. (page 17)  
The DVD Disc Menu screen appears when you hold  
down the key more than 1 second. (page 22)  
Standby Mode  
* Optional accessory  
DVD Disc Menu is not available when the top menu of the  
DVD is shown.  
You can also turn off the power by pressing the key  
longer than 1 second.  
When you press the key again,the power turns on.  
r
Small Display  
[DISP] key  
Switches to the Small Display. (page 16)  
8 Volume Controls  
[5]/[] key  
Adjusts the volume.  
9 Joystick  
Track/Station Selectors  
Aside from the navigation system, the display turns on  
when you apply the parking brake.  
[4]/[¢] key  
Selects a music or chapter, track, or frequency.  
It is necessary to set "Navigation Source" of <AV Interface>  
to "On" to add Navigation as an audio source that can be  
selected the with [SRC] key. (page 55)  
It is necessary to engage the shift knob of car to "Reverse"  
to switch to rear view camera video display.  
|
English  
11  
Basic Operations of Remote Controller  
2
NAV  
NAV  
3
5
TV  
TV  
DVD  
AUD  
DVD  
AUD  
ENTER  
18  
15  
ENTER  
1
14  
CANCEL  
CANCEL  
MENU  
MENU  
RETURN  
RETURN  
BAND+  
BAND+  
ZOOM  
OUT  
ZOOM  
OUT  
6
u
u
ATT  
ATT  
4
¢
38  
4
¢
38  
VOL  
d
VOL  
d
4
7
ZOOM  
IN  
ZOOM  
IN  
8
POSITION  
POSITION  
17  
16  
11  
10  
MODE  
PBC  
ROUTEM  
VIEW  
SC1  
ZOOM  
9
1 . ? &  
4 GHI  
2 ABC  
5 JKL  
8 TUV  
3 DEF  
AUDIO  
TOP MENU MENU  
MAPDIR  
VOICE  
SC2  
OPEN  
6 MNO  
SUBTITLE  
12  
19  
2-ZONE AV OUT  
u
7
PQRS  
9
WXYZ  
13  
0
#
BS  
d
20  
21  
REAR  
VOL  
CLEAR  
ANGLE  
DIRECT  
MODE  
ROUTEM  
SC1  
TOP MENU MU  
ZOOM  
1
Remote Control Mode selector switch  
5 [V.SEL] key  
Selects one of the following remote control modes  
when switched to AV control mode with [NAV] switch.  
TV: TV source  
Video source selection changes in the following order  
each time you press the key.  
DVD: Built-in DVD/VCD/CD/MP3/WMA/JPEG/MPEG  
player source  
AUD: Tuner source or attached disc changer source  
DVD/VCD  
TV */ Video  
R-CAM *  
2
[NAV] switch  
Pressing the switch until it locks enters into the  
navigation system control mode. Pressing the switch  
again returns to the AV control mode.  
Navigation *  
3
4
[SRC] key  
Audio source changes each time you press the key.  
* Optional accessory  
[VOL] key  
DISC  
TV  
TUNER  
Adjusts the volume. When you press the key, the  
volume attenuates. When you press the key again, the  
volume returns to the previous level.  
NAV  
It is necessary to engage the shift knob of car to "Reverse"  
to switch to rear view camera (R-CAM) video display.  
Zooms in or out the navigation map.  
|
12  
English  
6
[BAND] key  
w [2-ZONE] key  
(When 1 is set to "DVD" or "AUD")  
DISC  
DISC  
TV  
TUNER  
Select a disc and a folder.  
Turns Zone function on or off each time you press the  
key. (see page 68 for the <Zone Control>)  
NAV  
(When 1 is set to "TV" or "AUD")  
TV  
BAND: Switches to TV1, TV2, VIDEO1, or VIDEO2.  
(When 1 is set to "AUD")  
Plays Voice guidance.  
TUNER  
+: Switches to the FM1, FM2, or FM3 band.  
–: Switches to the AM band.  
NAV  
e
r
[REAR VOL] key  
DISC  
TV  
TUNER  
You can adjust the rear channel volume when Zone  
function is on.  
Selects the icon.  
7
8
9
[4]/ [¢] key  
[MENU] key  
(When 1 is set to "DVD" or "AUD")  
DISC  
(When 1 is set to "DVD")  
DVD  
Selects a song.  
Stops to play the built-in disc play.  
NAV  
Displays Main menu.  
(When 1 is set to "TV" or "AUD")  
TV  
Select a channel.  
(When 1 is set to "AUD")  
TUNER  
Selects a station.  
NAV  
Selects an icon or scrolls horizontally.  
t
[CANCEL] key  
(When 1 is set to "DVD")  
VCD  
DVD  
Returns to the previous screen when the DVD/VCD  
Disc Menu is displayed.  
NAV  
Displays previous screen (same as the [Return] button  
on the navigation screen).  
[38] key  
(When 1 is set to "DVD" or "AUD")  
DISC  
Plays or pauses.  
(When 1 is set to "TV" or "AUD")  
(When 1 is set to "AUD")  
TV  
TUNER  
y
u
[ZOOM] key  
Selects the Seek mode.  
(see page 34/40 for the <Seek Mode>)  
NAV  
(When 1 is set to "DVD")  
VCD  
DVD  
Each time you press the button, the zoom ratio  
switches.  
NAV  
Displays the current position.  
Jumps to the function registered in Shortcut 1.  
[TOP MENU] key  
(When 1 is set to "DVD")  
DVD  
[MENU] key  
Calls the Top menu of DVD Disc Menu.  
(When 1 is set to "DVD")  
DVD  
DISC  
TV  
TUNER  
Calls the DVD Disc Menu.  
Switches the Screen mode. (page 17) (When 1 is set  
to "TV" or "AUD")  
NAV  
(When 1 is set to "DVD")  
VCD  
Turns the PBC (Playback Control) function On or Off.  
NAV  
Switches between 2D and 3D map displays.  
Displays Route Option menu.  
p
[AV OUT] key  
i
Joystick  
DVD  
DISC  
TV  
TUNER  
Selects an AV source to be output at the AV OUTPUT  
port.  
NAV  
Switches between the heading up navigation and  
north up navigation map displays.  
Enters your selection from the DVD Disc Menu.  
NAV  
Scrolls the map, or moves the cursor.  
Also performs the selected function when you press  
the button down.  
q
[OPEN] key  
DISC  
TV  
TUNER  
Opens or closes the monitor each time you press the  
key.  
NAV  
Jumps to the function registered in Shortcut 2.  
: An operation during DVD playback  
: An operation during VCD playback  
DVD  
VCD  
: An operation during DVD, VCD, CD, MP3/WMA/JPEG/MPEG or MD playback  
: An operation during TV source  
DISC  
TV  
: An operation during FM/AM broadcasting source  
: An operation during Navigation (KNA-DV2600) control mode  
TUNER  
NAV  
|
English  
13  
Basic Operations of Remote Controller  
o
[0] – [9] key (When 1 is set to "TV" or "AUD")  
[
]/[ ] key  
(When 1 is set to "TV")  
(When 1 is set to "AUD")  
TV  
TUNER  
(When 1 is set to "DVD")  
VCD  
Slow Backward.  
Slow Forward.  
DVD  
:
:
1 . ? &  
6 MNO  
: Recall the stations on memory.  
NAV  
[ANGLE] key  
(When 1 is set to "DVD")  
You can enter a character/number.  
DVD  
[SUBTITLE] key  
0
: Switches the view angle.  
(When 1 is set to "DVD")  
: Switches a subtitle language.  
DVD  
6 MNO  
; [DIRECT] key  
Selects the Direct Search mode.  
(see page 23/31/36/41 for <Direct Search>)  
[AUDIO] key  
(When 1 is set to "DVD")  
VCD  
: Switches an audio language.  
DVD  
3 DEF  
a [CLEAR] key  
(When 1 is set to "DVD")  
Clears a numeric value you have entered in the built-in  
disc player during direct search.  
DVD  
[1]/[¡] key  
(When 1 is set to "DVD")  
DVD  
VCD  
CD  
1: Fast Backward (Rewind). The speed changes each  
time it is pressed.  
: Fast Forward. The speed changes each time it is  
pressed.  
¡
|
14  
English  
About discs  
Handling discs  
Removing discs  
When removing discs from this unit pull them out horizontally.  
Do not touch the recording surface of the disc.  
Discs that cannot be used  
Discs that are not round cannot be used.  
CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to damage  
than a normal music CD. Use a CD-R/RW, DVD-R/RW, or  
DVD+R/RW after reading the caution items on the package  
etc.  
Do not stick a tape, sticker, etc., on the disc.  
Also, do not use a disc with those materials pasted on it.  
Discs with coloring on the recording surface or that are dirty  
cannot be used.  
This unit can only play the CDs with one of  
labels.  
When using a new disc  
If the disc center hole or outside rim has burrs, use it after  
removing them with a ball pen etc.  
Discs without the label may not be played on the unit.  
A CD-R or CD-RW that hasn’t been finalized cannot be  
played. (For the finalization process refer to your CD-R/CD-  
RW writing software user’s guide, and your CD-R/CD-RW  
recorder instruction manual.)  
Disc storage  
Do not leave discs in direct sunlight (On the seat or  
dashboard etc.) and where the temperature is high.  
Put discs in their cases.  
Burrs  
Burrs  
Disc shaped accessory  
Do not insert a disc shape accessory into the unit.  
Disc cleaning  
Wipe from the center of the disc to outward.  
|
English  
15  
Switching Small Display  
The Small Display screen mode changes each time the [DISP] key is pressed.  
S
M
V
F
OPEN/CLOSE  
ATT  
DISP  
[DISP] key  
"AUX EXT"  
Navigation  
"NAV"  
STANDBY  
"STANDBY"  
* Hold down the [DISP] key more than 1 second to switch to the Frequency display.  
|
16  
English  
Switching Screen Mode  
The Screen mode of the monitor changes each time the [MODE] key is pressed.  
S
M
V
F
OPEN/CLOSE  
ATT  
DISP  
[MODE] key  
Full picture mode (FULL)  
Justify picture mode (JUST)  
Cinema picture mode (CINEMA)  
Zoom picture mode (ZOOM)  
Normal picture mode (NORMAL)  
When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically.  
The screen mode of these displays cannot be changed.  
You can set the screen mode for each of the DVD/VCD, TV, and video images.  
|
English  
17  
Controlling during DVD Video, Video CD , JPEG or MPEG Playback  
Various control screens appear when you play back a DVD Video (DVD), a Video CD (VCD) disc, a JPEG or  
MPEG files.  
Displaying the DVD/VCD/JPEG/MPEG  
Playback screen  
1 Title Number Display  
You can use the following operations when  
displaying DVD/VCD/JPEG/MPEG images.  
2 Chapter Number Display  
3 Play Time Display  
Plays back the  
DVD/ VCD or  
JPEG/MPEG  
files.  
4 Forward Chapter Search Area  
V
J
I  
T
Selects the next chapter.  
5 Backward Chapter Search Area  
DVD playback screen  
Selects the previous chapter.  
1
2
MODE: FU L L AV-OUT: DVD  
3
DVD VIDEO  
Title 1 Chap 3  
T
0:02:37  
6 DVD Disc Menu Control Buttons Area (page 22)  
5
4
6
When you touched during DVD menu played it will change  
to Highlight screen. (page 22).  
7
7 Information Display Button Area (page 23)  
VCD playback screen  
8 Scene/Track Number Display  
8
3
DVD VCD  
Scene  
2
P
2:37  
PBC  
VER2  
9 Forward Scene/Track Search Area  
Selects the next scene (when PBC is On) or track  
(when PBC is Off).  
MODE: FU L L AV-OUT: DVD  
11  
9
10  
p Backward Scene/Track Search Area  
Selects the previous scene (when PBC is On) or  
track (when PBC is Off).  
12  
q Zoom Control Button Area  
Displays the Zoom Control buttons (page 23).  
w Information Display Button Area (page 23)  
For DVD/VCD playback, DVD/VCD picture selection, or  
controller key operations, see <KVT-737DVD/747DVD/  
767DVD Basic Operations> (page 10).  
The information display is cleared automatically after  
approximately 5 seconds. Also, the information can be  
displayed automatically when it is updated (page 56).  
|
18  
English  
JPEG/MPEG playback screen  
e Folder/File Number Display  
13  
3
MODE: FU L L AV-OUT: DVD  
1
P
0:01:48 18  
DVD MEDIA  
r Forword File Search Area  
Selects the next folder or file.  
16  
14  
15  
t Backword File Search Area  
Selects the previous folder or file.  
17  
y Picture Control Button Area (page 23)  
JPEG playback only.  
u Information Display Button Area (page 23)  
i Play Time Display  
The Easy control panel functions are seeing page 24.  
Displaying the Easy Control Panel  
o Adjusts the volume.  
The Control Panel is displayed in a floating position  
of the DVD/VCD screen.  
; Switches the source.  
a Stops to play.  
When pressed twice, the disc is played from its  
beginning when you play it in the next time.  
F
s Fast Forwards or Fast Backwards  
Displaying the Easy Control Panel  
d Chapter Search  
DVD  
T i t l e  
1
MODE: FU L L AV-OUT: DVD  
C h a p  
3
T
0 : 0 5 : 3 2  
19  
DVD VIDEO  
Searches for a chapter.  
Scene/Track Search  
VCD  
Selects a scene (when PBC is On) or a track (when  
PBC is Off).  
f Plays or pauses.  
20  
21  
22  
22  
23  
23  
24  
SRC  
DVD VIDEO  
T i t l e  
1
C h a p  
3
T
0 : 0 5 : 3 219  
IN  
The Easy Control Panel is hidden when you touch a central  
area of the monitor.  
|
English  
19  
Displaying the DVD/VCD Control  
screen  
g Ejects the disc from the built-in disc player.  
h Calls the Sound Effects Menu. (page 64)  
j Calls the Setup Menu. (page 46)  
Plays a DVD/VCD using various functions.  
F
k Displays the Source Select screen. (page 44)  
l Fast Forwards or Fast Backwards.  
DVD/VCD Control screen  
/ Stops to play.  
When pressed twice, the disc is played from its  
beginning when you play it in the next time.  
DVD VIDEO  
13:50  
33  
31  
33  
30  
26  
27  
32  
31  
z Selects a chapter, a scene or a track.  
When the DVD/VCD is paused, touch this button to  
start single-frame stepping.  
29  
29  
28  
34  
IN  
41  
35REP  
TIME37  
36  
Next  
38  
PBC  
SCRL  
T0:05:20  
Title  
KENWOOD  
1
Chap  
43  
3
x Plays or pauses.  
39 40  
25  
c Slow Forwards or Backwards.  
DVD  
T-REP  
42  
v Turns the PBC function of VCD On or Off. (VCD Ver  
2.0)  
b Switches the Repeat Play operations in the  
following sequence.  
DVD: Title Repeat, Chapter Repeat, Repeat Off  
VCD: Track Repeat, Repeat Off (Available when the  
PBC is off)  
n Scrolls the display text.  
m Switches the play time display in the following  
sequence.  
DVD: Title, chapter, remaining titles  
VCD: Track, disc, remaining discs (Available when  
the PBC is off)  
, Title Number Display  
DVD  
. Chapter/Scene/Track Number Display  
P Play Time Display  
Q Appears when a disc is inserted.  
W Function Indicator  
E Volume Label Display  
|
20  
English  
Controlling  
during DVD Video, Video CD, JPEG or MPEG Playback  
|
English  
21  
DVD Disc Menu  
2 Select Disc Menu options  
Disc Menu  
Selects an option from the DVD Disc Menu.  
1 Display the Disc Menu Control screen  
Cancel  
DVD Disc Menu Control Buttons  
Area (page 18)  
MenuCtrl  
Audio  
SUB 1 0 / 1 0  
1 / 1  
1
3
4
MenuCtrl  
Top  
Menu  
Return  
3
6
1
5
3
3
5
2
6
Zoom  
1 / 1  
Angle  
Exit  
8
4
3
2
7
Enter  
Highlight  
Cancel  
Exit  
1 Calls the Menu Control.  
2 Switches the picture angle.  
(during program playback only)  
3 Switches the caption language.  
(during program playback only)  
1 Calls the Menu.  
2 Returns to the Disc Menu Control screen.  
3 Selects a menu option.  
4 Enters your menu selection.  
5 Returns to the previous menu screen.  
6 Displays the Top Menu.  
4 Switches the voice language.  
(during program playback only)  
5 Displays the Zoom Control screen.  
7 Highlight Control.  
6 Clears the Disc Menu Control.  
8 Clears the Disc Menu Control.  
Zoom Control  
Highlight Control  
You can select a chapter and title for the DVD  
Menu screen. When you touch a chapter and  
title, it is played back.  
Zoom  
ZoomCtrl  
2
Highlight  
2
2
Off : MODE Key  
DVD Menu  
DVD Menu  
1. KENWOOD  
1. KENWOOD  
1
2
3
4
Zoom  
x 2  
Cancel  
Exit  
2. KENWOOD  
2. KENWOOD  
3. KENWOOD  
3. KENWOOD  
1 Changes the zoom ratio at 4 levels (2 times, 3  
times, 4 times, or off) each time you touch.  
2 Scrolls the screen in the direction you touch.  
3 Returns to the Disc Menu Control screen.  
4 Clears the Disc Menu Control.  
4. KENWOOD  
4. KENWOOD  
5. KENWOOD  
5. KENWOOD  
6. KENWOOD  
6. KENWOOD  
To cancel Highlight Control, press "MODE" key. (page  
11)  
|
22  
English  
Controlling  
during DVD Video, Video CD, JPEG or MPEG Playback  
VCD Zoom Control  
Information Display  
Displays an enlarged VCD screen.  
Displays the DVD and AV information.  
Information Display  
Button Area  
1 Display the Zoom Control screen  
(page 18,19)  
Zoom Control Button Area  
(page 18)  
The information is displayed for 5 seconds.  
ZoomCtrl  
2
Direct Search  
You can search for a DVD/VCD chapter, scene or  
2
2
track by entering its number.  
1 Select the Direct Search mode  
1
2
3
Zoom  
x 2  
Exit  
#
BS  
DIRECT  
1 Changes the zoom ratio at 4 levels (2 times, 3  
times, 4 times, or off) each time you touch.  
2 Scrolls the screen in the direction you touch.  
3 Clears the Zoom Control button.  
The following items can be searched directly each  
time it is pressed.  
DVD: Title, Chapter, Time, Direct number  
VCD (when PBC is On): Scene, Direct number  
VCD (when PBC is Off): Track, Time  
However, the direct search may not be supported  
for some discs.  
Picture Control  
Rotates picture for JPEG files.  
1 Display the Picture Control screen  
2 Enter a number or time  
Picture Control Button Area  
(page 19)  
0
9
WXYZ  
PictureCtrl  
When playing back a VCD, enter a PBC screen  
number (if PBC is On) or a track number (if PBC is  
Off).  
1
3
4
To clear your incorrect entry, press  
(CLEAR).  
CLEAR  
2
5
Exit  
3 Search  
1 Switch the picture flip horizontal.  
2 Switch the picture flip vertical.  
3 Rotate the picture counter clockwise.  
4 Rotate the picture clockwise.  
38  
POSITION  
5 Clears the Picture Control button.  
The operation ends automatically if you do not operate  
within 10 seconds.  
|
English  
23  
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control  
You can call various control screens during CD/MP3/WMA/JPEG/MPEG/Disc Changer playback.  
Displaying the Easy Control Panel  
1 Adjusts the volume.  
The CD/MP3/WMA/JPEG/MPEG/Disc Changer Play  
Control Panel is displayed in a floating position of  
the selected picture.  
2 Switches the source.  
3 Stops to play the built-in disc player.  
4 Fast Forwards or Fast Backwards. (only when a CD is  
played back on the built-in disc player)  
F
5 Selects a song or data.  
When you continue to touch button:  
Fast Forwards or Fast Backwards.  
( Disabled when a JPEG is being played.)  
Displaying the Easy Control Panel  
During CD playback  
6 Plays or pauses.  
1
DVD CD  
MODE: FU L L AV-OUT: DVD  
7 Selects a folder. (only when an MP3/WMA/JPEG/  
MPEG is played back onthe built-in disc player)  
8 Selects a disc. (only when a disc is played back on  
the disc changer)  
2
3
4
4
5
5
6
SRC  
DVD CD  
Tr a c k  
3
P
0 5 : 3 2  
1
For CD/MP3/WMA/JPEG/MPEG/Disc Changer playback and  
receiver key operations, see <KVT-737DVD/747DVD/767DVD  
Basic Operations> (page 10).  
IN  
During MP3/WMA/JPEG/MPEG playback  
The Easy Control Panel is hidden when you touch a central  
area of the monitor.  
3
7
7
5
5
6
+
SRC  
3
1
P
0 : 0 5 : 3 2  
DVD MEDIA  
During playback on disc changer  
8
D
D 1  
8
D
T 3  
5
5
6
6
SRC  
CD CH  
-
+
P
5 : 3 2  
During playback on CD player  
5
5
SRC  
CD  
T
3
P
5 : 3 2  
|
24  
English  
Displaying the CD/MP3/WMA/ JPEG/  
MPEG/Disc Changer Control screen  
During CD playback  
You can play the CD/MP3/WMA/disc changer using  
various functions.  
9 Adjusts the volume.  
p Calls the CD Menu.  
q Calls the Sound Effects Menu. (page 64)  
w Displays the Source Select screen. (page 44)  
e Calls the Setup Menu. (page 46)  
r Ejects the disc from the built-in disc player.  
t Selects a track.  
F
CD Control screen  
9
9
DVD CD  
13:50  
10  
27  
Menu  
11  
13  
y Fast Forwards or Fast Backwards.  
u Plays or pauses.  
15  
17  
15  
16  
16  
12  
IN  
26  
i Starts or stops Scan Play (that plays the beginning  
18  
20  
21  
DISP  
P
22  
REP19  
of each song or data one after the other).  
SCN  
24 Track  
RDM  
SCRL TIME23  
4
KENWOOD  
2:09 25  
o Repeats to play (the present track).  
9
9
14  
; Starts or stops Random Play (to play songs in  
REP  
28  
random order).  
a Selects the Disc Name (see <Set Disc Name>, page  
29), Disc Text, or Track Text mode for text display.  
s Scrolls the display text.  
d Switches the play time display between Track, Disc,  
and Disc Remaining Time.  
f Track Number Display  
g Play Time Display  
h Appears when a disc is inserted.  
j Stops to play the built-in disc player.  
When pressed twice, the disc is played from its  
beginning when you play it in the next time.  
k Function Indicator  
|
English  
25  
MP3/WMA/JPEG/MPEG Control screen  
During MP3/WMA/JPEG/MPEG play  
l Calls the MP3/WMA/JPEG/MPEG Menu.  
/ Ejects a disc.  
DVD MEDIA  
Menu  
13:50  
32  
35  
35  
+
29  
33  
34  
33  
31  
31  
z Fast Forwards or Fast Backwards.  
45  
IN  
( Disabled when a JPEG is being played.)  
41  
36  
38  
39  
DISP SCRL  
40  
SCN REP37 RDM  
Next  
x Stops to play.  
3
1
P
0:00:38  
30  
43  
KENWOOD  
When pressed twice, the disc is played from its  
beginning when you play it in the next time.  
44  
REP 46  
c Selects a song or data.  
v Plays or pauses.  
FREP  
42  
b Selects a folder.  
n Starts or stops Scan Play (that plays the beginning  
of each song or data one after the other).  
m Repeats to play (the present song).  
, Starts or stops Random Play (to play songs of the  
present folder in random order).  
. Selects the Folder name, File name, Title (ID3/WMA  
tag), Artist name (ID3/WMA tag), or Album name  
(ID3 tag) for text display.  
P Scrolls the display text.  
Q Switches the button display.  
W Repeats to play the song or data of the present  
folder.  
E Folder and File Number Display  
R Play Time Display  
T Appears when a disc is inserted.  
Y Function Indicator  
|
26  
English  
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control  
Disc changer/CD player Control screen  
During play by the disc changer/CD player  
CD CH  
13:50  
48  
49  
47  
48  
+
Menu  
U Calls the Disc Changer/ CD player Menu.  
Disc  
50  
I Selects a track.  
49  
Starts Fast Forward or Fast Backwards when it is  
held down.  
-
Disc  
57  
52  
SCN REP RDM  
51  
53  
59  
TIME  
58  
DISP SCRL  
56  
Next  
O Selects a disc. (Function of Disc Changer)  
60  
61  
62  
3:25  
D
3
T
7
P
: Plays or pauses.  
63  
REP  
A Starts or stops Scan Play (that plays the beginning  
54  
55  
DREP MRDM  
of each song one after the other).  
S Repeats to play (the present track).  
D Starts or stops Random Play (to play songs in  
random order).  
F Repeats to play disc (the present disc). (Function of  
Disc Changer)  
G Starts or stops Magazine Random Play (to play  
songs of the disc changer in random order).  
(Function of Disc Changer)  
H Switches the button display.  
J Selects the Disc Name (see <Set Disc Name>, page  
29), Disc Text, or Track Text mode for text display.  
K Scrolls the display text.  
L Switches the play time display between Track, Disc,  
and Disc Remaining Time.  
Disc Number Display (Function of Disc Changer)  
Track Number Display  
Play Time Display  
Function Indicator  
The functions that can be used and the information that  
can be displayed will differ depending on the models being  
connected.  
|
English  
27  
Displaying the CD/MP3/WMA/JPEG/  
MPEG/Disc Changer Menu screen  
Selects options from various function menus.  
You can select menu options using various  
functions.  
Returns to the CD/MP3/WMA/JPEG/MPEG/Disc  
Changer Control screen.  
Menu  
The available functions vary depending on the source used.  
CD Menu screen  
DV D C D  
Name Set  
64  
65  
|
28  
English  
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control  
Set Disc Name  
Directory List (during MP3/WMA/JPEG/  
MPEG play)  
Names a CD.  
The directory of an MP3/WMA disc are listed for  
quick search.  
1 Play a CD you wish to name  
2 Call the CD/Disc Changer Menu  
1 Call the MP3/WMA/JPEG/MPEG Menu  
Menu  
3 Select the Set Name mode  
Name Set  
Menu  
2 Start the Directory List  
Directory List  
Upper Fo l d e r Name  
Fo l d e r Name  
Fo l d e r Name  
F i l e Name  
DVD MEDIA  
3
4
5
The  
position varies  
Name Set  
7
depending on the disc you are playing.  
7
2
4 Enter a name  
1
Root  
Fol  
F i l e Name  
6
For character entry details, see <Character Entry>  
(page 42).  
Open  
0 : 35 : 27  
F i l e Name  
5 Exit the Set Name mode  
1 Returns to the root directory.  
2 Displays the next higher level of hierarchy.  
3 Displays a directory if the subdirectory has  
O k  
a directory. When you touch the directory, it  
opens.  
4 Displays a directory if the subdirectory has  
files without a directory. When you touch the  
directory, it opens and songs in the directory  
are played.  
5 Displays the MP3/WMA/JPEG/MPEG files. When  
you touch a file, its song is played back.  
You cannot name an MD or MP3/WMA/JPEG/MPEG  
disc.  
Number of discs that can be stored in memory  
Built-in disc player: 10  
External CD changer/ player:  
Varies depending on the CD changer/ player. Refer to  
the CD changer/ player manual.  
6 Plays the selected directory.  
7 Scrolls the list.  
3 Select a song  
F i l e Name  
Display the desired song and touch the file display.  
|
English  
29  
ID3/WMA TAG Display (during MP3/  
WMA play)  
Disc Select (during play by disc  
changer)  
The ID3/WMA TAG information of MP3/WMA file is  
listed.  
The discs loaded on the disc changer are listed for  
quick disc selection.  
1 Call the MP3/WMA/JPEG/MPEG Menu  
1 Call the Disc Changer Menu  
Menu  
Menu  
2 Display the ID3/WMA TAG  
2 Call the Disc Select Menu  
Information  
Disc Select  
1
C D C H  
1. Disc Name  
2. Disc Name  
DVD MEDIA  
ALBUM:  
Title:  
2
DISP  
3. Disc Name  
4. Disc Name  
5. Disc Name  
6. Disc Name  
Artist:  
3
1
Album:  
3
1
P
2 : 3 5  
1 Scrolls the list.  
1 Plays the displayed disc.  
2 Selects the Disc Name or Disc Text mode for  
text display.  
3 Scrolls the list.  
(It is not displayed when a disc changer having  
6 or less discs is used.)  
3 Select the desired disc  
1. Disc Name  
Touch the desired disc display.  
|
30  
English  
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control  
Direct Search  
Searches for a disc or a track when its number is  
entered.  
During play on the built-in disc player  
1 Select the Direct Search mode  
#
BS  
DIRECT  
The following items can be searched directly each  
time it is pressed.  
CD: Track number, Total play time  
MP3/WMA/JPEG/MPEG: Folder, File  
2 Enter a track number  
0
9
WXYZ  
3 Search  
When searching for a track:  
38  
POSITION  
During play on an external in disc player or disc  
changer  
1 Enter a disc or track number  
0
9
WXYZ  
2 Search  
When searching for a track:  
4
¢
When searching for a disc:  
BAND+  
The operation ends automatically if you do not operate  
within 10 seconds.  
|
English  
31  
Tuner Control  
Various control screens appear in the Tuner Source mode.  
Displaying the Easy Control Panel  
1 Adjusts the volume.  
The Tuner Control Panel is displayed in a floating  
position of the selected picture.  
2 Switches the source.  
3 Switches the band (to AM or FM1/2/3).  
4 Tunes in a station  
F
5 Switches the Seek mode.  
(see page 34 for the <Seek Mode>)  
Displaying the Easy Control Panel  
1
For receiver key operations, see <KVT-737DVD/747DVD/  
767DVD Basic Operations> (page 10).  
MODE:FULL AV-OUT:DVD  
The Easy Control Panel is hidden when you touch a central  
area of the monitor.  
1
3
3
5
2
4
4
SEEK  
9 8 . 1 M H z  
SRC  
TUNER  
A M F M  
P r e s e t  
F M 1  
1
Displaying the Tuner Control screen  
6 Adjusts the volume.  
You can tune in a station using various functions.  
7 Calls the Tuner Menu.  
8 Calls the Sound Effects Menu. (page 64)  
9 Displays the Source Select screen. (page 44)  
p Calls the Setup Menu. (page 46)  
q Switches to the FM1/2/3 band.  
w Switches to the AM band.  
F
Tuner Control screen  
6
6
T U N E R  
13:50  
7
11  
12  
FM  
AM  
e Tunes in a station.  
8
13  
16  
13  
Use the <Seek Mode> to change the frequency  
switching.  
10  
9
6
1
r Switches between  
to  
buttons and  
15  
LO.S  
17  
18  
19  
20  
14  
Next  
SCRL MONO  
AME SEEK DISP  
Preset  
Function buttons to use.  
FM  
1
1
98 . 1 MHz  
23  
22  
LO.S  
t
Turns the Local Seeek function On or Off.  
6
<Function of KVT-737DVD>  
6
AUTO1  
21  
CRSC  
Turns the CRSC function On or Off. (Only  
1
2
3
4
5
6
when receiving the FM broadcast. The CRSC  
indicator displayed when the CRSC function is Off.)  
<Function of KVT-747DVD/767DVD>  
y Selects the Auto Memory mode.  
(see page 34 for the <Auto Memory>)  
u Switches the Seek mode.  
(see page 34 for the <Seek Mode>)  
i Selects the Program Service Name or Radio Text  
mode for text display. (KVT-737DVD only)  
|
32  
English  
o Scrolls the display text.  
(KVT-737DVD only)  
; Select the Monaural reception mode. (Only when  
receiving the FM broadcast) (KVT-737DVD only)  
6
1
a When  
to  
buttons appear, you can recall  
the stations on memory.  
For memory of broadcasting stations, see <Auto  
Memory> (page 34) or <Manual Memory> (page  
34).  
s Indicates current Seek mode.  
d Memory Number Display  
Displaying the Tuner Menu screen  
f Selects option from various function menus.  
You can select menu options using various  
functions.  
g Returns to the Tuner Control screen.  
The available functions vary depending on the model used  
(the tuner specifications and the broadcasting system that  
can be received).  
Menu  
Tuner Menu screen  
24  
T U N E R  
25  
|
English  
33  
Seek Mode  
Manual Memory  
Sets a station selection.  
Stores the current receiving station in memory.  
1 Select a station you wish to store in memory  
SEEK  
FM  
AM  
Next  
SEEK  
If  
is not shown, touch  
.
The mode is switched in following order each time  
you touch the button.  
2 Store in memory  
2sec.  
2sec.  
6
1
Tunes in a station with good  
reception automatically.  
AUTO1  
Tunes in stations in memory one  
6
1
Next  
AUTO2  
If  
to  
are not shown, touch  
.
after another.  
Continue to touch until the memory number  
appears.  
Switches to the next channel  
manually.  
MANU  
Auto Memory  
Stores stations with good reception in memory  
automatically.  
1 Select a band you wish to store in memory  
FM  
2 Select the Auto Memory mode  
AME  
AM  
Next  
AME  
If  
is not shown, touch  
.
3 Start Auto Memory  
Touch  
or  
.
Auto Memory terminates when 6 stations are  
stored or when all stations are tuned in.  
The operation ends automatically if you do not operate  
within 10 seconds.  
|
34  
English  
Tuner Control  
Preset Select  
Function of KVT-747DVD/764DVD  
Set Station Name  
Lists and tunes in stations in memory one after the  
other.  
Names a station.  
1 Call the Tuner Menu  
Menu  
1 Tune in a station you wish to name  
FM  
AM  
2 Call the Preset Select Menu  
2 Call the Tuner Menu  
Menu  
Preset Select  
1
T U N E R  
FM1 1) 87.5 MHz  
3 Select the Set Name mode  
Name Set  
4
FM1 2) 90.1 MHz  
FM1 3) 98.1 MHz  
FM1 4) 106.1 MHz  
FM1 5) 108.0 MHz  
FM1 6) 87.5 MHz  
2
2
4 Enter a name  
3
F M 9 8 . 1  
For character entry details, see <Character Entry>  
(page 42).  
1 Tunes in the displayed station.  
The station name is displayed if previously set.  
5 Exit the Set Name mode  
2 Switches the band of the displayed station list.  
3 Shows the band and frequency.  
4 Returns to the Tuner Menu.  
O k  
You can store up to 30 stations in memory.  
You can set a station name only after you have applied  
the parking brake.  
|
English  
35  
Direct Search  
Function of KVT-737DVD  
Traffic Information  
Tunes in a station when its frequency is entered.  
1 Select a band  
When a traffic bulletin starts, any source is switched  
to the traffic information and it is displayed  
automatically.  
BAND+  
When the traffic bulletin starts...  
The Traffic Information screen appears  
automatically.  
2 Selects the Direct Search mode  
#
BS  
Traffic Information screen  
DIRECT  
1
1
T U N E R  
13:50  
3 Enter a frequency  
2
3
9
WXYZ  
0
1
1
When you enter frequency, signal reception starts.  
Example: When you receive FM 92.1 MHz  
Traffic Information  
0
9
WXYZ  
2 ABC  
1 . ? &  
1 Adjusts the volume.  
2 Calls the Sound Effects Menu. (page 64)  
Example: When you receive AM 810 kHz  
0
8
TUV  
1 . ? &  
0
3 Calls the Setup Menu. (page 46)  
If you continue to listen to the audio source  
during traffic bulletin...  
The operation ends automatically if you do not operate  
within 10 seconds.  
It is necessary to have Traffic Information function set  
to On in order to have the Traffic Information screen  
appear automatically.  
During reception of traffic information the adjusted  
volume is automatically remembered, and the next  
time it switches to traffic information it's automatically  
the remembered volume.  
|
36  
English  
Tuner Control  
Function of KVT-737DVD  
Function of KVT-737DVD  
Search for Program Type  
Radio Text  
A program is tuned when you set its program type.  
You can display the radio text.  
(Only when receiving the FM broadcast.)  
(Only when receiving the FM broadcast.)  
1 Call the Tuner Menu  
1 Call the Tuner Menu  
Menu  
Menu  
2 Call the PTY Search Menu  
2 Display the Radio Text  
PTY Search  
Radio Text  
T U N E R  
All Speech  
All Music  
T U N E R  
1
2
4
1
Radio Text  
2
2
News  
Current Affairs  
Information  
3
SRCH  
F M 9 8 . 1  
Not Found  
F M 9 8 . 1  
1 Selects a program type.  
2 Scrolls the program type list.  
3 Searches for the program type.  
It is displayed when the Program Type is  
selected.  
1 Displays the Radio Text.  
2 Returns to the Tuner Menu.  
4 Returns to the Tuner Menu.  
3 Select a program type  
News  
etc.  
4 Search for the program type  
SRCH  
|
English  
37  
TV/ VIDEO Control  
Various control screens appear in the TV/ Video Source mode. (You can only operate TV with the optional  
accessory TV Tuner connected.)  
Displaying the TV Picture screen  
1 TV Band Number Display  
Various control screens appear in the TV Source  
mode.  
2 TV Area Group Display (page 61)  
3 Memory Number Display  
Select the TV  
Pictures.  
4 Channel Number Display  
F
5 Channel Up Area  
Increase the channel.  
TV Picture screen  
6 Channel Down Area  
G r o u p 1  
T V 1  
2
MODE:FULL AV-OUT:DVD  
P r e s e t  
1
3
2 c h  
4
1
Decrease the channel.  
7 Band/Video Switch Area  
6
5
7
Switches to TV1, TV2, or VIDEO.  
8 Information Display Button Area  
8
For TV picture selection and receiver key operations, see  
<KVT-737DVD/747DVD/767DVD Basic Operations> (page  
10).  
TV  
TV1  
G r o u p 1  
P r e s e t  
1
2 c h  
The information display is cleared automatically after  
approximately 5 seconds. Also, the information can be  
displayed automatically when it is updated (page 56).  
Displaying the Easy Control Panel  
9 Adjusts the volume.  
The Control Panel is displayed in a floating position  
of the TV picture.  
p Switches the source.  
q Switches to Video (VIDEO).  
w Switches the TV band (to TV1 or TV2).  
F
e Select a channel.  
Use the <Seek Mode> (page 40) to change the  
channel tuning sequence.  
Displaying the Easy Control Panel  
r Switches the Seek mode.  
T V 1  
P r e s e t  
MODE:FULL AV-OUT:DVD  
1
2 c h  
9
(see page 40 for the <Seek Mode>)  
The Easy Control Panel display is hidden when you touch a  
central area of the monitor.  
10  
11  
12  
T V  
13  
13  
14  
SEEK  
2 c h  
SRC  
TV  
VID  
TV1 G r o u p 1  
9
P r e s e t  
1
|
38  
English  
Displaying the TV Control screen  
t Adjusts the volume.  
You can tune in a TV station using various  
functions.  
y Calls the TV Menu.  
u Calls the Sound Effects Menu. (page 64)  
i Displays the Source Select screen. (page 44)  
o Calls the Setup Menu. (page 46)  
; Switches to VIDEO.  
F
TV Control screen  
a Switches to TV1 or TV2.  
15  
15  
s Select a channel.  
T V  
17  
13:50  
22  
16  
20  
VIDEO  
TV  
Use the <Seek Mode> (page 40) to change the  
channel tuning sequence.  
22  
24  
19  
21  
18  
6
1
d Switches between  
Function buttons to use.  
f Selects the Auto Memory mode.  
to  
buttons and  
25  
23  
2ch  
Next  
AME SEEK  
TV1 Group1 Preset  
28  
1
29  
(see page 40 for the <Auto Memory>)  
AUTO1  
15  
15  
27  
g Switches the Seek mode.  
26  
1
2
3
4
5
6
(see page 40 for the <Seek Mode>)  
6
1
h When  
to  
buttons appear, you can  
recall channels on memory.  
For memory of broadcasting stations, see <Auto  
Memory> (page 40) or <Manual Memory> (page  
40).  
j Indicates current Seek mode.  
k TV Area Group Display (page 61)  
l Memory Number Display  
Displaying the TV Menu screen  
/ Selects option from various function menus.  
You can select menu options using various  
functions.  
z Returns to the TV Control screen.  
The available functions vary depending on the model used  
(the tuner specifications and the broadcasting system that  
can be received).  
Menu  
TV Menu screen  
T V  
30  
31  
|
English  
39  
Seek Mode  
Manual Memory  
Sets a station selection.  
Stores the current receiving channel in memory.  
1 Select a channel you wish to store in memory  
SEEK  
TV  
Next  
SEEK  
If  
is not shown, touch  
.
The mode is switched in following order each time  
you touch the button.  
2 Store in memory  
2sec.  
2sec.  
6
1
Tunes in a station with good  
reception automatically.  
AUTO1  
Tunes in stations in memory one  
6
1
Next  
AUTO2  
If  
to  
are not shown, touch  
.
after another.  
Continue to touch until the memory number  
appears.  
Switches to the next channel  
manually.  
MANU  
Preset Select  
Lists and tunes in stations in memory one after the  
other.  
Auto Memory  
Stores stations with good reception in memory  
automatically.  
1 Select a band you wish to call  
1 Select a band you wish to store in memory  
TV  
TV  
2 Select the Auto Memory mode  
AME  
2 Call the TV Menu  
Menu  
(Page 39 y)  
3 Call the Preset Select Menu  
Next  
AME  
If  
is not shown, touch  
.
Preset Select  
3 Start Auto Memory  
1
T V  
TV1 1) 1ch  
2
TV1 2) 2ch  
TV1 3) 3ch  
TV1 4) 4ch  
TV1 5) 5ch  
TV1 6) 6ch  
Touch  
or  
.
Auto Memory terminates when 6 stations are  
stored or when all stations are tuned in.  
T V  
3 c h  
1 Tunes in the displayed station.  
The station name is displayed if previously set..  
2 Returns to the TV Menu.  
The operation ends automatically if you do not operate  
within 10 seconds.  
|
40  
English  
TV/ VIDEO Control  
Function of KVT-737DVD (NTSC TV type only)  
Set Station Name  
Direct Search  
Names a station.  
Tunes in a station when its channel number is  
entered.  
1 Select a station you wish to name  
TV  
1 Selects the Direct Search mode  
#
BS  
DIRECT  
2 Call the TV Menu  
2 Enter a channel number  
Menu  
(Page 39 y)  
9
WXYZ  
0
3 Select the Set Name mode  
When you enter a channel number, signal  
reception starts.  
Name Set  
Example: When you receive Channel 06  
4 Enter a name  
0
6 MNO  
For character entry details, see <Character Entry>  
(page 42).  
Direct Search ends automatically if you do not operate  
within 10 seconds.  
5 Exit the Set Name mode  
O k  
You can store up to 20 stations in memory.  
You can set a station name only after you have applied  
the parking brake.  
|
English  
41  
Character Entry  
How To Use the Character Entry  
screen  
1 Shifts the cursor.  
When you select the Set Disc Name mode or  
others, the following screen appears for character  
entry.  
2 Enters a space.  
If you erase a character, locate the cursor on it and  
touch this button.  
Character Entry screen  
3 Enters characters.  
1
1
4 Scrolls up or down the character button display.  
KENWOOD  
3
5 Exits the Character Entry mode and returns to the  
a
h
o
v
b
c
d
k
r
e
l
f
g
previous screen.  
i
j
m
t
n
u
4
p
w
2
q
x
s
z
You can enter characters only after you have applied the  
parking brake.  
4
y
5
S p a c e  
O k  
|
42  
English  
|
English  
43  
Source Select  
The source you wish to listen to can be selected quickly.  
Displaying the Control screen  
The Source Select screen can be displayed from the control  
screen of any source  
F
Press this key several times unit the Control screen  
appears.  
Control screen  
DVD VIDEO  
13:50  
IN  
REP  
Chap  
KENWOOD  
TIME  
SCRL  
T0:05:20  
Next  
PBC  
Title  
1
3
T-REP  
Displaying the Source Select screen  
1 Adjusts the volume.  
2 Select the source.  
3 Returns to the Control screen previously displayed.  
Source Select screen  
1
1
STANDBY  
2
TUNER  
DVD  
3
VIDEO  
CD CH  
AUX EXT  
1
1
|
44  
English  
Adjusting the Monitor Display Position and Quality  
You can adjust the position and picture quality of the monitor.  
Displaying the Screen Control screen  
1 Brightness Control  
You can adjust the picture quality using the  
Disabled if the Auto Dimmer is On.  
following keys.  
2 Tint Control  
Displayed for an NTSC system image on TV or  
S
Video.  
3 Color Control  
Displayed on the TV/Video screen only.  
Screen Control screen  
4 Contrast Control  
Au t o D I  
M
5 Black Level Adjustment  
1
2
3
1
2
3
7
7
6 Displays the Adjust Monitor Position screen.  
(see <Displaying the Angle Control screen>, page  
45)  
6
4
5
4
5
7 Auto Dimmer Setup  
When turned "On", the display is dimmed  
automatically when the ambient becomes dark.  
8
8 Returns to the previous screen.  
The Screen Control screen is displayed only when you have  
applied the parking brake.  
The picture quality can be set for each source.  
Displaying the Angle Control screen  
9 Monitor Angle Adjustment  
You can set the monitor position and open/close  
speed.  
p Forward/Backward Monitor Position Adjustment  
q Monitor Open/Close Setup  
When turned "On", the monitor is opened or closed  
automatically when you turn on or off the ignition  
key.  
Angle Control screen  
w Monitor Action Setup  
When set to "Quick", the monitor is opened quickly.  
9
9
e Returns to the Screen Control screen.  
r Returns to the previous screen.  
10  
10  
13  
Screen  
11  
12  
AUTO OP-CL  
MONI ACT  
Of f  
Normal  
14  
OK  
|
English  
45  
Setup Menu  
Setup Menu  
You can set up various receiver parameters.  
Displaying the Control screen  
You can call the same Setup Menu for the Control screen of  
each source.  
F
Press this key several times until the Control screen  
appears.  
Control screen  
DVD VIDEO  
13:50  
IN  
REP  
Chap  
KENWOOD  
TIME  
SCRL  
T0:05:20  
Next  
PBC  
Title  
1
3
T-REP  
Displaying the Setup Menu screen  
1 Adjusts the volume.  
2 Scrolls the Setup Menu.  
3 Calls each Setup Menu.  
4 Calls the Sound Effects Menu. (page 64)  
Setup Menu screen  
5 Returns to the Control screen of the previous  
1
1
source.  
3
4
Your setup on the Sound Effects menu is adjusted  
automatically according to your <Audio Set Up> (page  
47) on the Setup menu. We recommend you to complete  
the <Audio Set Up> first, then set up the <Sound Effects  
menu>.  
5
2
2
The available functions vary depending on the model used  
(the tuner specifications and the broadcasting system that  
can be received).  
1
1
|
46  
English  
Audio Set Up  
You can setup a speaker network, etc.  
Displaying the Audio Set Up screen  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
Speaker setup screen  
1
5 Displays the X'Over setup screen. (page 48)  
1
4
6 Sets up the front speaker type to fine-tune for the  
optimal equalizer curves.  
3
7
Standard: Setup for general diameter speakers  
Narrow: Setup for small diameter speakers  
Middle: Setup for middle diameter speakers  
2
5
Wide:  
Setup for large diameter speakers  
6
6
7 Set the use or no use of Subwoofer.  
1
1
|
English  
47  
Crossover Network Setup  
You can set a crossover frequency of speakers.  
(page 47 5)  
X'Over setup screen  
X'Over  
HPF Front FREQ  
1
2
3
220Hz  
HPF Rear FREQ  
180Hz  
LPF SUB FREQ  
120Hz  
4
SUB Phase  
Normal  
5
Re t u r n  
1 Sets a Front High Pass Filter frequency.  
You can select any of the following frequency.  
Through, 40, 60, 80, 100, 120, 150, 180, 220 Hz  
2 Sets a Rear High Pass Filter frequency.  
You can select any of the following frequency.  
Through, 40, 60, 80, 100, 120, 150, 180, 220 Hz  
3 Sets a Subwoofer Low Pass Filter frequency.  
You can select any of the following frequency.  
50, 60, 80, 100, 120, Through Hz  
4 Sets the phase of subwoofer output.  
The phase is reversed 180 degrees when set to  
"Reverse".  
5 Returns to the Speaker setup screen.  
Set in both the front channel and rear channel  
simultaneously when using high pass filter function. You  
cannot set a correct crossover network if the high pass filter  
function is only used for one channel.  
The SUB Phase button is not displayed when the Sub-  
woofer Low Pass Filter is set to "Through".  
|
48  
English  
Setup Menu  
DVD Setup  
You can set up the DVD play.  
Displaying the DVD SETUP 1 screen  
1 Returns to the Control screen of the previous  
source.  
2 Calls the Sound Effects Menu. (page 64)  
3 Calls the Setup Menu.  
4 Selects a disc menu language.*1  
DVD SETUP 1 screen  
(See <Language Setup>, page 51)  
5 Selects a subtitle language.*1  
3
Menu LANG  
2
en  
Sub t i t l e LANG  
en  
Aud i o LANG  
en  
Set  
Set  
Set  
4
5
(See <Language Setup>, page 51)  
6 Selects an audio language.*1  
1
(See <Language Setup>, page 51)  
6
7
Dynam i c R ange Con t r o l  
Normal  
7 Sets the dynamic range.( Wide)  
The dynamic range is reduced by changing  
from "Wide" to "Normal" and from "Normal" to  
"Midnight". You can easy to listen a small sound  
when the dynamic range is narrow.  
7
DVD SETUP 1  
8
This is effective only when you are using a Dolby  
Digital software.  
8 Displays the DVD SETUP 2 screen.  
If  
is not shown, touch  
or  
to display it.  
*1 Disabled when a DVD is being played.  
|
English  
49  
Displaying the DVD SETUP 2 screen  
9 Sets an angle mark display. ( On)  
p Selects the screen display mode.*1 ( 16:9)  
"16:9": Displays wide pictures.  
"4:3 LB": Displays wide pictures in the Letter Box  
format (having black stripes at the top and  
bottom of screen).  
DVD SETUP 2 screen  
"4:3 PS": Displays wide pictures in the Pan & Scan  
format (showing pictures cut at the right  
and left ends).  
Angle Mark  
9
Screen Ratio  
9
On  
Off  
Set  
13  
10  
10  
16:9  
Parental Level  
Off  
q Displays the Parental Lock screen.*1 ( Off)  
11  
(See <Parental Level Setup>, page 52)  
w Displays the DVD SETUP 1 screen.  
12  
DVD SETUP 2  
e Displays the DVD SETUP 3 screen.  
*1 Disabled when a DVD is being played.  
Displaying the DVD SETUP 3 screen  
r Selects the picture display time. *1( Middle)  
The Display of a JPEG picture is changed.  
"Short", "Middle", "Long"  
t Selects the Picture Effect.*1( Random)  
y Selects the Picture Signal Type. *1( PAL)  
"NTSC" or "PAL" (Function of KVT-737DVD)  
u Displays the DVD SETUP 2 screen.  
DVD SETUP 3 screen  
Picture Display Time  
Middle  
14  
Picture Transition  
Random  
Picture signal Type  
PAL  
15  
*1 Disabled when a DVD is being played.  
16  
17  
DVD SETUP 3  
|
50  
English  
Setup Menu  
Language Setup  
Abbreviation  
aa  
ab  
af  
Language  
Abbreviation  
lv  
Language  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Afar  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
German  
Bhutani  
Greek  
mg  
mi  
mk  
ml  
mn  
mo  
mr  
ms  
mt  
my  
na  
ne  
nl  
no  
oc  
om  
or  
pa  
pl  
Selects a language you use for the speech and  
menus.  
am  
ar  
as  
1 Display the Language Setup screen  
ay  
az  
ba  
be  
bg  
bh  
bi  
bn  
bo  
br  
ca  
co  
cs  
cy  
da  
de  
dz  
el  
en  
eo  
es  
et  
See <Displaying the DVD SETUP 1 screen> (page  
49) and select a language you wish to use.  
Malay  
Maltese  
Burmese  
Nauru  
Nepali  
Dutch  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Punjabi  
Polish  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance  
Kirundi  
Romanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangho  
Serbo-Croatian  
Singhalese  
Slovak  
Slovenian  
Samoan  
Shona  
Somali  
Albanian  
Serbian  
Audio LANG  
en  
1
a
h
o
b
i
c
j
d
k
r
e
l
f
g
n
u
m
t
p
q
s
v
w
x
y
z
ORIGN  
4
3
2
5
C l e a r  
C a n c e l  
E n t e r  
ps  
pt  
qu  
rm  
rn  
1 Enters a language code.  
2 Cancels the language setup and returns to the  
DVD SETUP 1 screen.  
3 Clears the language code.  
4 Sets the original audio language.  
(It appears during audio language setup.)  
5 Sets the language and returns to the DVD  
SETUP 1 screen.  
(It appears after you have entered a language  
code.)  
English  
Esperanto  
Spanish  
Estonian  
Basque  
Persian  
Finnish  
ro  
ru  
rw  
sa  
sd  
sg  
sh  
si  
eu  
fa  
fi  
fj  
fo  
Fiji  
Faroese  
French  
Frisian  
fr  
fy  
sk  
sl  
ga  
gd  
gl  
gn  
gu  
ha  
he  
hi  
Irish  
sm  
sn  
so  
sq  
sr  
ss  
st  
su  
sv  
sw  
ta  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
2 Enter a language code  
See the Language Code Table shown at right to  
select the desired language.  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Telugu  
Hebrew  
Hindi  
hr  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
3 Set the language you use  
hu  
hy  
ia  
ie  
ik  
te  
tg  
th  
E n t e r  
Tajik  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tongan  
Turkish  
Tsonga  
Tatar  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Wolof  
Xhosa  
Yoruba  
Chinese  
Zulu  
id  
is  
it  
ja  
Indonesian  
Icelandic  
Italian  
Japanese  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Korean  
Kashmiri  
Kurdish  
ti  
tk  
tl  
tn  
to  
tr  
ts  
tt  
tw  
uk  
ur  
uz  
vi  
vo  
wo  
xh  
yo  
zh  
zu  
jv  
ka  
kk  
kl  
km  
kn  
ko  
ks  
ku  
ky  
la  
Kirghiz  
Latin  
Luxembourgish  
Lingala  
Laotian  
lb  
ln  
lo  
lt  
Lithuanian  
|
English  
51  
Parental Level Setup  
3 Display the Parental Level Setup screen  
Sets a parental level.  
E n t e r  
1
Display the Parental Level code number screen  
Parental Level  
Set  
(Page 50 q)  
Level 5  
Parental Pass  
* * * *  
1
1
1
1
2
3
5
8
0
4
7
6
Level 5  
2
4
R e t u r n  
9
1 Sets a parental level.  
3
2
5
C l e a r  
C a n c e l  
E n t e r  
2 Returns to the DVD SETUP 2 screen.  
4 Set a parental level  
1 Enters a code number.  
2 Cancels the current setup and returns to the  
DVD SETUP 2 screen.  
3 Clears the code number.  
4 Indicates the present parental lock level.  
5 Determines the code number and displays the  
5 Complete the parental level setup  
Parental Level Setup screen.  
R e t u r n  
2 Enter the code number  
0
9
If a disc has a higher parental lock level, the audience  
needs to enter the code number.  
The parental lock level varies depending on a loaded  
disc.  
The number you enter first is set as your code number.  
If a disc has no parental lock, any audience can play it  
back even when you have set the parental lock.  
You can clear the code number by pressing the Reset  
button.  
|
52  
English  
Setup Menu  
System Setup  
You can set up the system parameters.  
Displaying the System Set Up 1  
screen  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
System Set Up 1 screen  
5 Turns the key touch tone On or Off. ( On)  
1
1
4
6 Allows scrolling of text display on the Source  
Beep  
3
5
5
6
7
O
n
O
O
f f  
f f  
Control screen. ( Auto)  
Scroll  
A u t o  
Remote Sensor  
"Auto":  
Scrolls the screen automatically.  
2
"Manual": Allows you to scroll the screen manually.  
7
O
n
7 Selects a remote control signal. ( On)  
When turned "Off", the remote control of TV  
reception is rejected.  
System Set Up 1  
8
1
1
8 Displays the System Set Up 2 screen.  
If  
is not shown, touch  
or  
to display it.  
Displaying the System Set Up 2  
screen  
9 Sets a music CD playback. ( 1)  
"1": Automatically recognizes and plays back an  
MP3/WMA disc, a DVD or a music CD.  
"2": Forcibly plays back a disc as a music CD. Select  
"2" if you wish to play a music CD having a  
special format or if you cannot play a disc in  
the "1" position.  
System Set Up 2 screen  
CD Read  
1
9
Key ILLUMI  
G r e e n  
DISP ILLUMI  
K e y S y n c  
10  
11  
You cannot play an MP3/WMA/VCD disc in the "2" position.  
Also, you may not play some music CDs in the "2" position.  
Your setup is disabled when the disc is being played.  
p Selects an illumination color of receiver keys.  
Green)  
"Green": Green  
"Red": Red  
q Selects an illumination color of the Small Display.  
Blue)  
"Blue":  
12  
System Set Up 2  
(
(
A blue color display  
"Key Sync": The same color as the this unit button  
illumination color  
w Displays the System Set Up 1 screen.  
|
English  
53  
AV Interface  
You can set audio and visual (AV) interface parameters. >  
Displaying the AV I/F 1 screen  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
AV I/F 1 screen  
5 Selects a navigation system connection. ( RGB)  
"RGB": Allows the Kenwood’s Navigation System  
to connect via its interface cable.  
1
4
3
1
5
6
5
6
"AV-IN": Allows a third-party navigation system to  
connect via the AV INPUT port.  
2
7
On  
"Off":  
Must be used if no navigation system  
is connected. (The navigation display  
is cancelled when the AV source is  
switched.)  
8
1
1
6 Sets a name to be displayed when you select a  
system that is connected via the AV INPUT port.  
(
VIDEO)  
If you have set the navigation system connection to "AV IN",  
the display is fixed to "NAV".  
7 Sets an image display of the system that is  
connected via the AV INPUT port. ( Off)  
"Off": When the image source is switched, an  
image entered via the AV INPUT2 port is  
displayed.  
"On": When an image signal is entered via the AV  
INPUT2 port, this image is displayed.  
8 Displays the AV I/F 2 screen.  
If  
is not shown, touch  
or  
to display it.  
|
54  
English  
Setup Menu  
Displaying the AV I/F 2 screen  
9 Sets a method to switch to the rear view camera  
video display. ( Off)  
"On": Switches to the rear view camera video  
display when engaging the shift knob of car  
to "Reverse".  
"Off":Switches to the the rear view camera video  
display when engaging the shift knob of car  
to "Reverse" and then pressing the [V.SEL]  
switch several times.  
AV I/F 2 screen  
O n  
9
10  
11  
p You can flip the left and right of the rear view  
camera video display. Set to "Reverse" and the the  
rear view will be displayed left and right in mirror  
image on the screen. ( Normal)  
DV D  
11  
13  
12  
q Selects an AV source to be output at the AV  
OUTPUT port. ( AV-IN)  
w Displays the AV I/F 1 screen.  
e Displays the AV I/F 3 screen.  
Displaying the AV I/F 3 screen  
r Selects speakers used for voice guidance of the  
navigation system. ( F-Left)  
"F-Left": Uses the front left side speaker for voice  
guidance.  
"F-Right": Uses the front right side speaker for  
voice guidance.  
AV I/F 3 screen  
"Front-All":Uses both front speakers for voice  
guidance.  
14  
15  
16  
17  
F-Left  
t Adjusts the volume for voice guidance of the  
15  
navigation system. ( 19)  
y Mutes the volume during voice guidance of the  
navigation system. ( On)  
When turned "On", the volume level drops for voice  
guidance.  
18  
u Sets a selecting method of audio source from the  
Navigation system. ( Off)  
"On": Allows you to select the audio source input  
from the Navigation system interface by  
pressing [SRC] or selecting it on Source Select  
screen.  
"Off":The audio source cannot be selected using  
[SRC] or on Source Select screen.  
i Displays the AV I/F 2 screen.  
|
English  
55  
User Interface  
You can set up user interface (IF) parameters.  
Displaying the User I/F 1 screen  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
User I/F 1 screen  
1
5 Switches the wall paper.  
1
4
6 Displays the User I/F 2 screen.  
3
5
5
2
If  
is not shown, touch  
or  
to display it.  
6
1
1
Displaying the User I/F 2 screen  
7 Sets an on-screen display of the navigation screen.  
Auto)  
(
"Auto": Information is displayed for 5 seconds when  
updated.  
"MANU": Information is displayed when you touch  
on the screen.  
User I/F 2 screen  
8 Sets an on-screen display of the video playback  
screen. ( Auto)  
7
8
9
"Auto": Information is displayed for 5 seconds when  
updated.  
"MANU": Information is displayed when you touch  
on the screen.  
10  
T V  
9 Sets an on-screen display of the DVD playback  
screen. ( MANU)  
11  
"Auto": Information is displayed for 5 seconds when  
updated.  
"MANU": Information is displayed when you touch  
on the screen.  
p Sets an on-screen display of the TV screen.  
(
Auto) (with the optional accessory TV tuner  
connected only)  
"Auto": Information is displayed for 5 seconds when  
updated.  
"MANU": Information is displayed when you touch  
on the screen.  
q Displays the User I/F 1 screen.  
|
56  
English  
Setup Menu  
Touch Panel Adjustment  
Clock  
You can adjust the touch panel operations.  
1 Display the Touch Panel Adjust screen  
You can adjust the clock time.  
1 Display the Clock screen  
Touch  
Clock  
Touch  
Clock  
If  
is not shown,  
to display it.  
If  
is not shown,  
to display it.  
touch  
or  
touch  
or  
1
1
1
1
4
4
6
6
7
7
Menu  
Touch Adjust  
3
2
5
3
2
5
S e t  
11:25  
8
9
9
O
n
O
f f  
RDS SYNC  
To u c h  
C l o c k  
1
1
1
1
1 Adjusts the volume.  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
2 Returns to the Control screen of the previous  
source.  
source.  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
5 Allows you to start touch panel adjustment.  
5 Clock time display.  
KVT-737DVD (24-hour Clock display)  
KVT-747DVD/767DVD (12-hour Clock display)  
6 Adjusts hours.  
2 Start to adjust the touch panel  
S e t  
7 Adjusts minutes.  
8 Sets "00" minute.  
Setup examples: 3:00~3:29 3:00  
3:30~3:59 4:00  
Touch Adjust  
1
2
9 Sets the clock time in synchronization with the  
time data sent from the RDS station. ( On)  
When turned "On", the synchronized mode  
starts and the clock cannot be adjusted  
manually. (Function of KVT-737DVD)  
2 Adjust the clock time  
1 Cancels the adjustment and returns to the  
Touch Panel Adjust screen.  
2 Resets to the initial status.  
3 Adjust the positions  
Touch the center of left lower and right upper  
when requested.  
|
English  
57  
Security Code Setup  
2 Start the security code registration  
You can set a security code to protect your receiver  
system against theft.  
S e t  
Pass Word  
1st  
When the Security Code function is activated it cannot be  
released.  
Note, your Security Code is the 4 digit number entered in  
your "Car Audio Passport" in this package.  
1
1
4
7
2
5
8
0
3
6
9
1 Display the Security Code Setup screen  
3
2
4
C l e a r  
C a n c e l  
E n t e r  
Security  
1Enters the numbers to your security code.  
2 Clears your entry.  
3 Cancels the registration and returns to the  
Security Code Setup screen.  
Security  
If  
is not shown,  
to display it.  
touch  
or  
1
1
4 Registers your security code.  
4
5
S e c u r i t y C o d e  
S e t  
f f  
3
2
3 Enter a security code  
6
6
O
n
O
D S I  
9
0
S e c u r i t y  
Input a four-digit number.  
1
1
4 Register your security code  
E n t e r  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
5 Allows you to start security code registration.  
6 Turns the DSI function on or off.  
If turned "On", the burglar alarm lamp flashes  
5 Reenter the security code  
Reenter the same security code as that you have  
entered in Step 3 for confirmation.  
when the protection panel is removed. ( On)  
If you enter a different security code, the screen returns  
to Step 3 (for the first code entry).  
If you have already completed the code registration,  
S e t  
is not available.  
6 Register the security code again  
E n t e r  
Now, your security code is registered.  
If you press the Reset button or if you disconnect  
your receiver from the battery after the code  
registration, you need to enter the registered  
security code.  
See below for details.  
|
58  
English  
Setup Menu  
If you have pressed the Reset button or if you have  
disconnected the Receiver from battery...  
1 Enter the correct security code  
9
0
You must enter the same security code as that you  
have entered in Step 3 above.  
2 Enter the security code  
E n t e r  
Now, you can use your Receiver.  
If you enter an incorrect security code, you cannot use  
your Receiver for a while. (Function of KVT-737DVD)  
Incorrect entry count  
Receiver inoperable time  
1
2
5 minutes  
1 hour  
24 hours  
3
4 or more  
|
English  
59  
1 Recalls the memorized settings.  
2 Memorizes the current Audio Set Up and AV  
Set Up Memory  
Audio Set Up and AV Interface settings can be  
memorized. The memorized settings can be recalled  
at any time. For example, even when the settings  
are cleared due to replacement of the battery, the  
settings can be restored.  
Interface settings.  
3 Clears the currently memorized settings.  
4 Returns to Set Up Memory screen.  
3 Memorize or recall the settings.  
When memorizing the Audio Set Up and AV  
Interface settings:  
1 Display the Set Up Memory screen  
Set Up Memory  
If settings have already been memorized, a  
confirmation message appears. Touch  
To cancel memorization, touch  
.
Set Up Memory  
If  
is not shown,  
to display it.  
.
touch  
or  
When recalling the memorized settings:  
1
1
4
3
5
6
5
Would You Like to  
Memorize or Recall the  
Audio & AV setup?  
2
Touching the screen displays a confirmation  
message. Touch  
.
6
To cancel recalling, touch  
.
1
1
When clearing the currently memorized  
settings:  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
Touching the screen displays a confirmation  
message. Touch  
To cancel clearing, touch  
.
5 Locks the Audio Set Up and AV Interface settings.  
When  
is selected, you cannot set the  
.
Audio Set Up and AV Interface settings.  
6 Memorizes or recalls the settings. To cancel the  
4 Quit memorization/recalling of settings.  
function, touch  
.
To cancel memorization, touch  
.
The Setup Menu screen appears again.  
2 Display the Memory screen  
When the settings have already been memorized, it will be  
cleared if you set up memory function without connecting  
a monitor and a receiver unit.  
4
Please Select the  
Desired Function from  
the Choices Below.  
2
3
1
|
60  
English  
Setup Menu  
TV Setup <Function of KVT-737DVD (PAL TV type only)/747DVD/767DVD>  
The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only)  
Displaying the TV1 Area Set screen  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
TV Set Up  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
TV1 Area Set screen  
1
5 Sets the present TV1 receiving area.  
6 Displays the TV2 Area Set screen.  
1
4
Menu  
China  
3
2
TV Set Up  
If  
is not shown, touch  
or  
to display it.  
5
1
2
3
4
5
6
T V 1 A r e a S e t  
1
1
Displaying the TV2 Area Set screen  
7 Sets the present TV2 receiving area.  
8 Displays the TV1 Area Set screen.  
TV2 Area Set screen  
Menu  
China  
7
1
2
3
4
5
8
T V 2 A r e a S e t  
|
English  
61  
RDS Setup (Function of KVT-737DVD )  
The related RDS parameters can be set.  
Displaying the RDS Set Up 1 screen  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
RDS Set Up  
3 Calls the Sound Effects Menu. (page 64)  
4 Calls the Setup Menu.  
RDS Set Up 1 screen  
5 Sets a news bulletin interrupt time.  
6 Turns the Alternative Frequency function On or Off.  
1
1
4
Menu  
News  
5
A F  
3
2
5
6
7
O f f  
O
(
On)  
7 Turns the Region Restriction function On or Off.  
On)  
n
n
O
O
f f  
f f  
6
Regional  
(
7
O
O
Auto TP Seek  
8
8 Turns the Auto TP Seek function On or Off. ( On)  
8
n
O
f f  
9 Displays the RDS Set Up 2 screen.  
RDS Set Up 1  
9
1
1
RDS Set Up  
If  
is not shown, touch  
or  
to display it.  
Displaying the RDS Set Up 2 screen  
p Selects a display language for the PTY function.  
q Displays the RDS Set Up 1 screen.  
RDS Set Up 2 screen  
Menu  
Language Select  
10  
10  
G e r m a n  
11  
RDS Set Up 2  
|
62  
English  
Setup Menu  
AMP Control  
Sets the power amp connected via the LX bus. (with the optional accessory LX Power Amp connected only)  
Displaying the AMP Control screen  
1 Adjusts the volume.  
2 Calls the Setup Menu.  
AMP Ctrl  
3 Calls the Sound Effects Menu. (page 64)  
4 Returns to the Control screen of the previous  
source.  
AMP Control screen  
5 Setup option and value display  
6 Select a setup option.  
7 Selects a set value.  
1
1
2
Menu  
6
6
3
4
7
7
8 Enters the set value.  
S e t  
8
5
A M P  
1
VO LT 1 4 . 4 V  
AMP Ctrl  
If  
is not shown, touch  
A M P C o n t r o l  
or  
to display it.  
1
1
For the model name of amp you can control from the  
system, see the amp’s catalog.  
For the options and values you can change and for the  
amp’s operation when changed, see the amp’s instruction  
manual.  
|
English  
63  
SoundEffects Menu  
Sound Effects Menu  
You can set up the receiver sound effects.  
Displaying the Control screen  
You can display the same Sound Effects Menu on the  
Control screen of any source.  
F
Control screen  
DVD VIDEO  
13:50  
TIME  
IN  
REP  
Chap  
Next  
PBC  
Title  
KENWOOD  
SCRL  
1
3
T0:05:20  
T-REP  
Displaying the Sound Effects Menu  
screen  
1 Adjusts the volume.  
2 Calls the Sound Effects Menu.  
3 Calls the Setup Menu. (page 46)  
4 Returns to the Control screen of the previous  
Sound Effects screen  
source.  
1
1
2
Your setup on the <Sound Effects Menu> is adjusted  
automatically according to your <Audio Set Up> ( page  
47) on the Setup menu. We recommend you to complete  
the <Audio Set Up> first, then set up the <Sound Effects  
Menu>.  
3
4
1
1
|
64  
English  
Audio Control  
You can adjust the front and rear and right and left audio balance.  
Displaying the Audio Control 1  
screen  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
3 Calls the Setup Menu. (page 46)  
4 Calls the Sound Effects Menu.  
Audio Control 1 screen  
1
5 Adjusts the right and left volume balance.  
6 Adjusts the front and rear volume balance.  
1
6
6
4
7 Adjusts the volume of the present source based on  
5
5
3
the difference level of original volume.  
2
8
8
7
9
7
- 1  
If you have increased the volume first, then reduced the  
volume using the "Vol. Offset", the sound generated if you  
suddenly switch to another source may be extremely loud.  
10  
1
1
8 Adjusts the subwoofer volume.  
9 Turns the Loudness control function On or Off.  
If turned "On", high and low tones are automatically  
enhanced during low volume. ( On)  
p Displays the Audio Control 2 screen.  
Displaying the Audio Control 2  
screen  
q Adjusts the bass boost of the B.M.S power amplifier  
(optional accessory).  
You may not set some models of power amp boost to "+18".  
See the catalog or instruction manual of power amplifier.  
Audio Control 2 screen  
w Sets the center frequency of bass boost you have  
set for "AMP Bass". (optional accessory)  
Menu  
BMS AMP Bass  
If you set the center frequency to "Low", it will be  
dropped approximately 20% to 30%.  
11  
11  
+
BMS AMP FREQ  
6 d B  
12  
Normal  
Low 12  
e Displays the Audio Control 1 screen.  
Audio Control 2  
13  
|
English  
65  
Equalizer  
You can set up the equalizer.  
Displaying the Equalizer screen  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
Equalizer  
3 Calls the Setup Menu. (page 46)  
4 Calls the Sound Effects Menu.  
Equalizer screen  
5 Selects an equalizer curve type.  
1
1
You can select any of the following equalizer  
curves.  
4
7
Menu  
To n e  
3
2
• "Natural"  
• "Rock"  
• "Pops"  
• "Easy"  
• "Top40"  
• "Jazz"  
5
System Q-EX  
Equalizer  
5
6
On  
1
1
6 Selects items to be adjusted for tone curve setup.  
If turned "Off", only Level can be setup for tone  
curves.  
7 Displays the Tone curve setup screen. (page 67)  
Equalizer curve can be set for each source.  
|
66  
English  
Sound Effects Menu  
Tone curve setup  
4 Set a level  
Level  
You can set a Tone curve.  
1 Display the Tone setup screen  
5 Set a Q factor  
To n e  
(Page 66 7)  
Q Factor  
Tone setup screen  
1
1
You can set it up only when Bass or Middle is  
adjusted.  
2
3
6 Close the Tone setup screen  
4
6
5
7
1
1
1 Adjusts the volume.  
2 Bass adjustment items are displayed.  
3 Middle adjustment items are displayed.  
4 Treble adjustment items are displayed.  
5 Bass DC Extend settings  
If turned "On", it extends the bass center  
frequency to the low register by approximately  
20%.  
6 Tone curve becomes flat.  
7 Returns to the Equalizer screen.  
Tone curve can be set for each source.  
2 Select a frequency band you wish to adjust  
You can adjust the following frequency bands.  
Bass:  
40, 50, 60, 70, 80, 100, 120, 150 Hz  
Middle: 500, 1k, 1.5k, 2k Hz  
Treble: 10k, 12.5k, 15k, 17.5k Hz  
3 Set a center frequency  
FREQ  
|
English  
67  
Sound Effects Menu  
Zone Control  
You can set the front and rear audio source.  
Displaying the Zone Control screen  
1 Adjusts the volume.  
2 Returns to the Control screen of the previous  
source.  
3 Calls the Setup Menu. (page 46)  
4 Calls the Sound Effects Menu.  
Zone Control screen  
1
5 Turns the Zone Function (that sets different source  
1
4
5
sounds for front and rear speakers) On or Off.  
When turned On,  
and  
are shown.  
7
3
2
6 Sets the front and rear audio source separately.  
(This button appears when the Zone function is  
On.)  
8
6
6
1
1
When the rear speaker sound is switched, the audio source  
that is output at the AV OUTPUT terminal is also switched to  
the same source.  
However, if you have set the "Area" to "Reverse", the audio  
source that is output at the AV OUTPUT terminal is switched  
depending on the front sound source.  
7 Switches the front and rear audio sources.  
(This button appears when the Zone function is  
On.)  
Use "Reverse" to change over the front and rear  
audio sources.  
8 Adjusts the volume of the rear channel.  
There are following limitations when zone function is set to  
"On".  
- There is no output from the subwoofer or center.  
- Audio Setup function (page 47) and Equalizer setting  
function (page 66) are not available.  
|
68  
English  
Muting Audio Volume upon Reception of Phone call  
Muting Audio Volume upon Reception  
of Phone call  
When the telephone is called, the system is paused  
automatically.  
When the telephone is called...  
The Phone Call ("CALL") screen appears, and  
systemis paused.  
Phone Call ("CALL") screen  
C A L L  
13:50  
If you want to continue to listen to the audio  
source during phone call...  
The system resumes audio play during the phone  
call.  
When the call ends...  
Hang up the phone.  
The system resumes playing automatically.  
|
English  
69  
Glossary  
DVD: Digital Versatile Disc  
Title number (DVD)  
A type of disc which contains recording of audio/  
video packaged media with high video and audio  
quality, such as a movie, featuring large recording  
capacity and digital signal processing capability.  
The title is the largest unit of video and audio  
recorded in a DVD. It usually corresponds to a  
single movie of video software or an album (some-  
times a piece of music) of music software. The  
numbers assigned to individual titles are referred  
to as the title numbers.  
VCD: VIDEO CD  
A type of CD which contains the recording of mov-  
ing images. It compresses image information by  
about 1/120 and audio information by about 1/6  
and accommodates up to 74 minutes of recording  
in a disc with the same diameter as ordinary music  
CD of 12 cm.  
Chapter number (DVD)  
The chapter is a section of video and audio record-  
ed in a DVD. A title is composed of several chap-  
ters. The numbers assigned to individual chapters  
are referred to as the chapter numbers.  
Some VCDs do not have the P.B.C. compatibility  
and are capable of playback only, while some are  
P.B.C.-compatible and are capable of various spe-  
cial playback control operations. This player can  
play both of these VCDs.  
Subtitles (DVD)  
Some DVD discs contains the recording of more  
than one subtitle language. This player allow you  
to select one of the recorded subtitle languages  
during playback.  
MPEG: Moving Picture Experts Group  
This is an international standard for digital video  
and audio compression and decompression in  
media.  
Track number (CD, VCD)  
A track is also a section of video and audio record-  
ed in a disc. The numbers assigned to individual  
tracks are referred to as the track numbers.  
With most of music CDs, a track is assigned to a  
piece of music. However, with a VCD, the sections  
of the contents do not always correspond to the  
assigned tracks.  
As (special) playback functions such as skipping  
and programming of ordinary CDs are based on  
track number data, such playback functions are  
sometimes impossible with some VCDs.  
Dolby Digital  
This is a digital audio compression technology  
developed by Dolby Laboratories. It is compatible  
with 5.1-channel surround audio as well as normal  
stereo (2-channel) audio and can accommodate a  
large amount of audio data efficiently in a disc.  
DTS  
Name of a digital surround system developed by  
Digital Theater Systems, Inc.  
P.B.C.: Play-Back Control (VCD)  
When a VIDEO CD carries "Play Back Control  
capable" or similar message on the disc or jacket,  
desired scenes and information can be played back  
in an interactive manner using a hierarchical struc-  
ture while viewing the menu screens displayed on  
the TV screen.  
Top menu/menu (DVD)  
Some DVDs display more than one title in a screen.  
This screen is referred to as the top menu.  
The menu is the item display (menu screen) for use  
in setting operations. The menu can be recalled  
any time during playback to perform settings  
according to the current software, including the  
audio switching between Dolby Digital and PCM,  
switching of language used in the subtitles and  
spoken voice.  
|
70  
English  
Troubleshooting Guide  
What might appear to be a malfunction in your unit may just be the result of slight misopera-  
tion or miswiring. Before calling service, first check the following table for possible problems.  
The parking brake is not engaged.  
For safety reasons no television/video images  
are displayed while the vehicle is moving.  
Engaging the parking brake will cause images  
to be displayed.  
General  
The power does not turn on.  
?
The fuse has blown.  
After checking for short circuits in the wires,  
replace the fuse with one having the same  
rating.  
The screen is dark.  
?
The unit is in a location where temperature is  
low.  
The speaker wire has a short-circuit or touches  
the chassis of the vehicle, and then the  
protection function is activated.  
If the temperature of the monitor unit drops,  
the screen may appear darker when power is  
first turned on due to the characteristics of a  
liquid crystal panel. Wait a while after turning  
power on for the temperature to rise. Normal  
brightness will return.  
Wire or insulate the speaker cable properly and  
press the reset button.  
The desired source is NOT selected although  
you pressed the SRC button.  
?
A non-connected source cannot be selected.  
A non-connected source is not selected. See  
<INSTALLATION MANUAL> and connect the  
unit correctly.  
The screen does not darken when the vehicle’s  
lights are turned on.  
?
The unit is set to auto dimmer.  
When the unit is set to auto dimmer, it is not  
linked to the vehicle's light switch.  
The RESET button is not pressed yet although  
the optional unit has been connected to the  
system.  
The illumination wire has not been connected.  
(If manual dimmer is set)  
Press the reset button (page 4).  
Make proper connections according to  
<INSTALLATION MANUAL>.  
The "O-N" switch of the optional unit is at the  
"O" position.  
Set the "O-N" switch to the "N" position.  
AM/FM radio reception is poor and/or there is  
noise.  
?
A disc changer not supported by the system is  
used.  
The TV antenna and vehicle‘s radio antenna are  
too close.  
Use a disc changer supported by the system  
(page 4).  
Separate the two antennas as far as possible.  
Turn off the main unit.  
Nothing happens when the buttons are  
pressed.  
?
?
The remote controller does not operate.  
?
?
The remote control mode selector is not set  
correctly.  
The computer chip in the unit is not  
functioning normally.  
Switch the remote control mode selector  
according to the source you select (page 12).  
Press the reset button on the unit (page 4).  
The message "Disconnected cable found.  
Please confirm a connection line" is displayed  
and the unit cannot be used.  
No sound can be heard, or the volume is low.  
Attenuator is turned on.  
Turn off Attenuator.  
Receiver unit is disconnected.  
The fader or balance settings are set all the  
way to one side.  
Connect the wire correctly, referring to the  
section on <INSTALLATION MANUAL>.  
Reset the fader and/or balance settings.  
No television/video image appears.  
?
The input/output wires or wiring harness are  
connected incorrectly.  
The unit is not connected to the parking brake  
detection switch.  
Reconnect the input/output wires or the  
wiring harness correctly. See the section on  
<INSTALLATION MANUAL>.  
Make proper connections according to  
<INSTALLATION MANUAL>.  
|
English  
71  
The sound quality is poor or distorted.  
The voice (or subtitle) language cannot be  
changed.  
?
?
One of the speaker wires is being pinched by a  
screw in the car.  
The DVD disc being played does not contain  
the recording of more than one audio (or  
subtitle) language.  
Check the speaker wiring.  
The speakers are not wired correctly.  
Reconnect the speaker wires so that each  
output terminal is connected to a different  
speaker.  
The voice (or subtitle) language cannot be  
changed when the DVD disc being played  
does not contain the recording of more than  
one voice (or subtitle) language.  
Radio reception is poor.  
?
?
The viewing angle cannot be changed.  
?
The car antenna is not extended.  
Pull the antenna out all the way.  
The DVD disc being played does not contain  
the recording of more than one angle.  
The viewing angle cannot be changed when  
the DVD disc being played does not contain  
the recording of more than one angle.  
The antenna control wire is not connected.  
Connect the wire correctly, referring to the  
section on <INSTALLATION MANUAL>.  
The memory is erased when the ignition is  
turned off.  
You are attempting to switch the angle in a  
DVD section where more than one angle is not  
recorded.  
The battery wire has not been connected to  
the proper terminal.  
More than one viewing angle may be recorded  
only in limited sections in a disc.  
Connect the wire correctly, referring to the  
section on <INSTALLATION MANUAL>.  
Playback will not start even after a title is  
selected.  
?
?
The ignition and battery wire are incorrectly  
connected.  
A viewing restriction (RATING) has been set for  
Connect the wire correctly, referring to the  
section on <INSTALLATION MANUAL>.  
the disc.  
Check the viewing restriction level (RATING)  
setting.  
The sound/picture skips on a DVD/VCD/CD.  
?
?
The disc is scratched or dirty.  
The voice or subtitle language selected in the  
initial setting is not played.  
Clean the disc, referring to the section on  
<Disc cleaning> (page 15).  
The DVD disc being played does not contain  
the recording of the selected voice or subtitle  
language.  
Does not switch to the rear view camera video  
display when pressing the [V.SEL] button.  
Use a DVD disc containing the recording of the  
selected voice or subtitle language.  
The reverse sensor wire is disconnected.  
Connect the wire correctly, referring to the  
section on <INSTALLATION MANUAL>.  
A track will not play.  
?
?
Random play has been selected.  
Turn off random play.  
A VCD cannot be played using menus.  
The VCD disc being played is not compatible  
with P.B.C.  
Menu playback is available only with VCD discs  
recorded with P.B.C.  
The subtitle is not displayed.  
?
The DVD disc being played does not contain  
the recording of subtitles.  
The subtitle cannot be displayed when the  
DVD disc being played does not contain the  
recording of subtitles.  
|
72  
English  
Troubleshooting Guide  
Disc source  
Cannot remove disc.  
?
The disc control mode cannot be selected.  
?
The cause is that more than 10 minutes has  
elapsed since the vehicle ACC switch was  
turned OFF.  
No wire has been connected to the disc  
changer input terminal on the unit.  
Connect the wire to the disc changer input  
terminal on the unit.  
The disc can only be removed within 10  
minutes of the ACC switch being turned OFF.  
If more than 10 minutes has elapsed, turn  
the ACC switch ON again and press the Eject  
button.  
The specified disc does not play, but another  
one plays instead.  
?
The specified CD is quite dirty.  
Clean the CD.  
MP3/WMA source  
The CD is upside-down.  
Load the CD with the labeled side up.  
Cannot play an MP3/WMA.  
?
The disc is loaded in a different slot from that  
specified.  
The media is scratched or dirty.  
Clean the media, referring to the Disc cleaning  
of the section on <About discs> (page 15).  
Eject the disc magazine and check the number  
for the specified disc.  
The sound skips when an MP3/WMA is being  
played.  
?
The disc is severely scratched.  
Try another disc instead.  
The media is scratched or dirty.  
Clean the media, referring to the Disc cleaning  
of the section on <About discs> (page 15).  
The sound skips.  
?
Something is touching the disc changer.  
Remove whatever is touching it.  
The recording condition is bad.  
Record the media again or use another media.  
The CD is scratched or dirty.  
If skipping happens at the same place when  
the car is stopped, something with the CD is  
wrong. Clean the CD.  
The MP3/WMA track time is not displayed  
correctly.  
?
?
---  
There are times when it isn’t displayed correctly  
according to the MP3/WMA recording  
conditions.  
The display shows that the changer is being  
played, but no sound can be heard.  
?
?
?
The computer chip in the unit is not  
functioning normally.  
Press the reset button on the unit (page 4).  
Can not display the ID3 tag information  
correctly.  
Record is not made in conformity with the ID3  
tag version 1.x.  
Record in conformity with the ID3 tag version  
1.x.  
Also, the display may be incorrect if an  
MP3/WMA file uses the ID3 tag v1.x standard  
and if this standard has been expanded after  
production of the machine software.  
The specified track will not play.  
Random play or magazine random play has  
been selected.  
Turn off random play or magazine random  
play.  
Track repeat, disc repeat, track scan, disc scan,  
random play, and magazine random play start  
by themselves.  
The setting is not cancelled.  
The settings for these functions remain on until  
the setting to off or the disc ejected, even if  
the power is turned off or the source changed.  
|
English  
73  
Troubleshooting Guide  
The following messages are displayed when  
certain problems are occurring in your sys-  
tem. Take the recommended actions.  
Hot Error  
The protective circuit in the unit activates when the  
temperature inside the unit exceeds 60°C (140°F),  
stopping all operation.  
]Cool down the unit by opening the windows or  
turning on the air conditioner. As the temperature  
falls below 60°C (140°F), the disc will start playing  
again.  
Hold Error  
The protective circuit in the unit activates when  
the temperature inside the automatic disc changer  
exceeds 60°C (140°F), stopping all operation.  
]Cool down the unit by opening the windows or  
turning on the air conditioner. As the temperature  
falls below 60°C (140°F), the disc will start playing  
again.  
Mecha Error  
The disc player is malfunctioning.  
]Eject the disc and try inserting it again. Contact the  
Kenwood dealer if this indicator continues blinking  
or the disc cannot be ejected.  
Disc Error  
The unplayable discs is inserted.  
Read Error  
The disc is upside-down.  
]Load the disc with the labeled side up.  
The disc is quite dirty.  
]Clean the disc, referring to the section on <Disc  
cleaning> (page 15).  
Region code Error  
The DVD software encoded for other region code.  
Parental level Error  
The parental level is set to high levels.  
Error 07 — 67  
The unit is malfunctioning for some reason.  
]Press the reset button on the unit. If the "Error ##"  
code does not disappear, consult your nearest  
service center.  
|
74  
English  
Specifications  
Specifications subject to change without notice.  
Monitor section  
AM Tuner section (KVT-747DVD/767DVD)  
Picture size  
Frequency range (9kHz)  
: 531kHz~1611kHz  
Usable sensitivity  
: 28dBμ  
: 6.95 inches wide  
154.1(W)×87.1(H)mm  
Display system  
: Transparent TN LCD panel  
Drive system  
LW Tuner section (KVT-737DVD)  
: TFT active matrix system  
Frequency range (9kHz)  
: 153kHz~281kHz  
Usable sensitivity  
: 45μV  
Number of pixels  
: 336,960 (480H×234V×RGB)  
Effective pixels  
: 99.99%  
Pixel arrangement  
: RGB striped arrangement  
MW Tuner section (KVT-737DVD)  
Frequency range (9kHz)  
: 531kHz~1611kHz  
Back lighting  
: Cold Cathode Fluorescent Tube  
Usable sensitivity  
: 45μV  
DVD section  
D/A Converter  
: 24Bit  
Decoder  
Video section  
Color system of external video input  
: NTSC/PAL  
: Linear PCM/Dolby Digital/dts/MP3/WMA  
External video input level (RCA jacks)  
: 1Vp-p/75Ω  
Wow & Flutter  
: Below Measurable Limit  
External audio max input level (RCA jacks)  
: 1V/22kΩ  
Frequency response  
Sampling frequency;96k: 20~22,000Hz  
Analog RGB input  
: 0.7Vp-p/75Ω  
Sampling frequency;48k: 20~22,000Hz  
Sampling frequency;44.1k: 20~20,000Hz  
Total harmonic distortion (1k)  
: 0.007%  
Audio section  
Signal to Noise ratio  
Maximum Power (Front&Rear)  
: 50W×4  
Full Bandwidth Power (Front&Rear)(at Less than 1%THD)  
: 22W×4  
Preout level (V)  
: 5V/10kΩ  
Preout impedance  
: 80Ω  
: 98dB (DVD-Video 96kHz)  
Dynamic range  
: 98dB (DVD-Video 96kHz)  
DISC Format  
: DVD-Video/VIDEO-CD/CD-DA  
Sampling frequency  
: 44.1kHz/48kHz, 96kHz  
Quantifying bit number  
: 16/20/24bit  
Tone action  
Bass: 100 Hz 10 dB  
Middle: 1 kHz 10 dB  
Treble: 10 kHz 10 dB  
FM Tuner section  
Frequency range (50kHz)  
: 87.5~108.0MHz  
Usable sensitivity (S/N=30dB)  
: 9.3dBf (0.8μV/75Ω)  
Quieting sensitivity (S/N=50dB)  
: 15.2dBf (1.6μV/75Ω)  
Frequency response ( 3.0dB)  
: 30Hz~15kHz  
S/N (dB) (MONO)  
: 70dB  
Selectivity ( 400kHz)  
: ≥ 80dB  
Stereo separation  
: 40dB (1kHz)  
General  
Operating voltage  
: 14.4V (11V~16V)  
Current consumption  
: 15A  
Dimensions (W×H×D)  
Main unit: 182mm×53mm×161mm  
Hideaway unit: 225mm×40mm×168mm  
Operational temperature range  
: -10°C~60°C  
Storage temperature range  
: -20°C~85°C  
Weight  
Main unit: 2.2kg  
Hideaway unit: 1.1kg  
Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light  
incorrectly.  
|
English  
75  
The marking of products using lasers (Except for some areas)  
CLASS 1  
LASER PRODUCT  
The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1.  
It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the  
unit.  
is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.  
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property  
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other  
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.  
Manufactured under license from Dolby Laboratories.  
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.  
"DTS" and "DTS 2.0 + Digital Out" are trademarks of Digital Theater Systems, Inc.  

Pioneer CDX P686 User Manual
Pelco Camera Accessories TB1750 User Manual
Pelco Camera Accessories PT573 User Manual
Metra Electronics 99 7425 User Manual
Mellerware ROBOT 300 85200 User Manual
LG Electronics 4000 User Manual
Land Pride Car Video System 4220ST User Manual
Kenwood KFCX1300P User Manual
Kenwood FFINELINE RFU 6100 User Manual
JVC KD LH810 User Manual