Kenwood KIV700 User Manual

DIGITAL MEDIA RECEIVER  
KIV-BT900  
KIV-700  
INSTRUCTION MANUAL  
Before reading this manual, click the button below to check the latest edition  
and the modified pages.  
Check the latest edition  
Take the time to read through this instruction manual.  
Familiarity with installation and operation procedures will help you obtain the best  
performance from your new Digital Media-receiver.  
For your records  
Record the serial number, found on the back of the unit, in the spaces designated on the  
warranty card, and in the space provided below. Refer to the model and serial numbers  
whenever you call upon your Kenwood dealer for information or service on the product.  
Model KIV-BT900/ KIV-700 Serial number  
US Residents Only  
Register Online  
Register your Kenwood product at www.Kenwoodusa.com  
© 10ORD_IM316_Ref_en_01_K  
Before Use  
Notes  
2WARNING  
• If you experience problems during installation,  
consult your Kenwood dealer.  
• When you purchase optional accessories, check with  
your Kenwood dealer to make sure that they work  
with your model and in your area.  
• Characters that conform to ISO 8859-1 can be  
displayed.  
• The RDS or RBDS feature won’t work where the  
service is not supported by any broadcasting  
station.  
• The illustrations of the display and the panel  
appearing in this manual are examples used to  
explain more clearly how the controls are used.  
Therefore, what appears on the display in the  
illustrations may differ from what appears on the  
display on the actual equipment, and some of the  
illustrations on the display may be inapplicable.  
To prevent injury or fire, take the following  
precautions:  
• Do not watch or fix your eyes on the unit’s display  
when you are driving for any extended period.  
• To prevent a short circuit, never put or leave any  
metallic objects (such as coins or metal tools) inside  
the unit.  
Do not use this unit before canceling  
Demonstration mode  
This unit is initially set on the Demonstration mode.  
When using this unit for the first time, cancel  
the Demonstration mode. Refer to <Exit of the  
The demonstration is an operation image. It may be  
different from actual operation.  
How to reset your unit  
If this unit or the connected unit (auto disc changer,  
etc.) fails to operate properly, reset the unit. While  
pressing the [Volume] knob and the [MENU] button,  
press the [SRC] button for at least 3 seconds. The unit  
returns to factory settings when the reset operation  
is complete.  
SRC MENU Volume  
Cleaning the Unit  
If the faceplate of this unit is stained, wipe it with a  
dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain off with  
a cloth moistened with neutral cleaner, then wipe it  
again with a clean soft dry cloth.  
¤
Applying spray cleaner directly to the unit may affect its  
mechanical parts. Wiping the faceplate with a hard cloth or  
using a volatile liquid such as thinner or alcohol may scratch  
the surface or erases characters.  
English  
|
3
 
Component Names and Functions  
1
2
3
4
5
Rear view  
AUX  
6
7
8
9
10  
11  
12  
13  
1
[MENU] button  
7
[SRC] button  
To select a song or set functions. See <Menu List  
To turn on this unit and select the Source (press  
the button).  
To turn off this unit (press the button at least 1  
second).  
2
3
[DISP] button  
To change display item (press the button).  
8
9
[
4
] / [  
¢] buttons  
[Volume] knob  
To select a station and song. (press the button).  
To adjust volume (turn the knob).  
To select menu setting item (turn and press the  
details.  
[
38] button  
To start or interrupt playback for audio file and  
iPod. (press the button).  
KIV-BT900 : To display Play mode in the Menu List  
(press the knob at least 1 second).  
KIV-700 : To make a voice dialing call (press the  
knob at least 1 second). *1 See <Make a Voice  
To select the remove mode, and remove the USB  
device or an iPod (press the button at least 2  
seconds or more).  
10 KIV-BT900: [ ] button  
To enter Bluetooth mode (press the button).  
To make a voice dialing call (press the button at  
least 1 second). See <Make a Voice Dialing Call>  
4
5
[SEARCH MODE] button  
To enter Search mode (iPod), move between  
folders (Audio file), etc. For more details, see  
operations of each source described in page 6  
or later.  
KIV-700: [PLAY MODE] button  
To display Play mode in the Menu List (press the  
button). *1  
Microphone (KIV-BT900)  
The microphone for hands free phone is  
supplied.  
When your voice cannot be recognized due  
to the low microphone volume or noises in  
the vehicle, adjust the microphone settings by  
11 Display window  
12 [FAV] button  
To recall a registered favorite item (press the  
button).  
To register to Favorite (press the button at least  
1 second).  
6
Auxiliary Input Terminal  
Portable audio device can be connected with the  
mini-plug (3.5 mm ø).  
13 USB Terminal  
A USB device or an iPod can be connected.  
Use the mini-plug cable which is stereo type and does  
not have any resistance.  
*1 Only with KCA-BT300/BT200 (optional accessory)  
connected.  
|
4
KIV-BT900/ KIV-700  
General Operation  
Exit of the Demonstration Mode  
Menu List Operation  
Turn off the demonstration mode when you use it  
for the first time after installation.  
The basic operating procedure for using this  
function is described below. The individual function  
items are covered in the operating procedures.  
1
Press the [Volume] knob to quit the  
demonstration mode when the message “To  
Cancel DEMO Press the volume knob” is displayed  
(approx. 15 seconds).  
1
Select the source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Function items vary from source to source. For a list  
of the function items, refer to <Menu List> (page 68).  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
2
Turn the [Volume] knob to select “YES” and then  
press the [Volume] knob.  
Power and Source Select  
2
3
Enter Menu List mode  
Press the [MENU] button.  
Turns the power ON by pressing the [SRC]  
button.  
Select the setting item  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Repeat the operation until your desired setup item  
is selected.  
Press the [MENU] button to return to the  
previous item.  
Operation example:  
When the power is ON, select a source.  
• SRC Select mode 1: Press the [SRC] button and  
then turn the [Volume] knob. To determine the  
selected source, press the [Volume] knob.  
• SRC Select mode 2: Pressing the [SRC] button  
each time switches between sources.  
Tuner (“TUNER”) USB, iPod or Zune (“USB,  
“iPod, or “Zune”) Internal Memory (“Int.  
Mem.) Auxiliary input (“AUX”) Standby  
(“STANDBY”)  
4
[Volume]  
1[Volume]  
2
4
3
2
Music  
3
2
Playlists  
My  
Keeping pressing the [SRC] button for at least 1  
second turns the power OFF.  
Best 25  
1
1
Artists  
Albums  
[MENU]  
3[MENU]  
Videos  
Play Mode  
The SRC Select mode can be set in “Source Select” of <Initial  
1 sec.  
Auxiliary input source is initially set to “OFF. Set “Built in  
AUX” described in <Initial Settings> (page 38) to “ON.  
When an optional accessory is connected, the source name  
for each device appears.  
When connection of the iPod is recognized, the source  
display changes from “USB” to “iPod, Zune.  
In this manual, the above selection is indicated as  
Select “Music” > “Playlists” > “My Best 25.  
4
5
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
Internal Memory source cannot be selected when “AV Out  
Set” described in <Initial Settings> (page 38) is set to “ON.  
Exit Menu Setting mode  
Press the [MENU] button for at least 1 second to  
return to the first hierarchy.  
Press the [MENU] button in the first hierarchy to  
exit the Menu List mode.  
Volume  
Turning the [Volume] knob adjusts the sound  
volume.  
English  
|
5
   
iPod/iPhone Operation  
SRC MENU Volume  
DISP  
SEARCH MODE  
iPod  
AUDIO OUT  
iPod  
VIDEO OUT  
4
38  
¢
/ PLAY MODE  
Basic Operation  
For more details on USB HUB, see <About USB device>  
Playing iPod  
• Connect an iPod  
When connected, the source is switched  
automatically and a song starts playing.  
Switching display  
Press the [DISP] button to select display mode.  
Selects the Artwork small, Artwork large, Video or  
Clock.  
• Select iPod source  
Press the [SRC] button. Turn the [Volume]  
knob and press it when the desired item is  
displayed.  
Select the “iPod” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
The Video mode is displayed only when you  
have applied the parking brake.  
Display example of Artwork small mode  
3
1
Song Select  
4
Press the [4] or [¢] button.  
This unit cannot be operated for a few seconds  
while reading Artwork after selecting a song.  
2
5
1 Song information (see <Customization of  
2 Play time and play time bar  
3 Browse item  
4 Album art  
5 Play mode indicator (see <Display Indicator  
Fast Forwards or Fast Backwards  
Hold down the [4] or [¢] button.  
Pause and Play  
Press the [38] button to pause or resume  
playback.  
Remove iPod  
Press the [38] button for at least 2 seconds.  
The unit enters the USB REMOVE mode (“USB  
REMOVE” is displayed), and the iPod can be  
removed safely.  
USB Device select  
iPod may not be recognized when USB HUB is used.  
Switch to the device to be connected.  
1. Enter Menu List mode  
Press the [MENU] button.  
2. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select “Port Up.  
Repeat these steps to switch to the device to  
be connected.  
|
6
KIV-BT900/ KIV-700  
 
mode after searching a song, the memorized position is  
displayed. Press the [MENU] button for at least 1 second to  
move to the first hierarchy, select a Menu item, and set it’s  
parameters.  
Characters which cannot be displayed are left blank. If non  
of the characters can be displayed, the browse item name  
and digits are displayed.  
Selecting a Song by Browsing iPod  
Display  
Items  
“Music”  
“Playlists”  
“Artists”  
Playlists  
Artists  
“Albums”  
“Songs”  
Albums  
Songs  
Items  
Playlists  
Artists  
Albums  
Songs  
Display  
“PLIST***” Podcasts  
“ART***”  
“ALB***”  
“PRGM***”  
Items  
Display  
“PDCT***”  
“GEN***”  
“COM***”  
“Podcasts”  
“Genres”  
Podcasts  
Genres  
Genres  
Composers  
“Composers”  
“Audiobooks”  
“Videos”*1  
Composers  
Audio books  
“CAT***, LIST***, or “PRGM***” may be displayed  
depending on the hierarchy of Video files folders.  
“Video Playlists” Video Playlists  
“Movies” Movies  
“Music Videos” Music Videos  
“TV Shows” TV Shows  
“Video Podcasts” Video Podcasts  
“Rentals” Rentals  
*1 Name and number of items displayed in “Videos” are the  
same as the iPod.  
1
2
Select iPod source  
Enter Menu List mode  
Press the [MENU] button.  
3
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Music” or “Videos.  
4
Select a song  
Operation type  
Move between items  
Select an item  
Operation  
Turn the [Volume] knob.  
Press the [Volume] knob.  
Page up or down  
Press the [DISP] or [ ] / [PLAY MODE]  
button.  
Press the [DISP] or [ ] / [PLAY MODE]  
button for at least 1 second to continuously  
scroll. Press the button again to stop  
scrolling.  
Return to previous item  
Return to Top menu  
Press the [MENU] button.  
Press the [MENU] button for at least 1  
second.  
For example: Searching by Artist name.  
Select “Music” > “Artists” > Artist name > Album  
name > Song title  
Cancelling the Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
The unit memorizes the position where you have found a  
song in the Search mode. When you enter the Menu List  
English  
|
7
 
iPod/iPhone Operation  
This mode is not compatible with music information  
display. The display will show “iPod By Hand Mode.  
iPod can be operated when it conforms to the iPod  
control function.  
When you cancel the hand mode while playing a video  
file, the video file stops and a music file starts.  
Play Mode  
You can select a Play Mode, such as Random play  
and Repeat play.  
1
2
Select iPod source  
Enter Play Mode in the Menu List  
KIV-BT900: Press the [Volume] knob for at least  
1 second.  
KIV-700: Press the [PLAY MODE] button.  
You can also select from “Play Mode” in Menu  
List mode.  
3
Select the Play Mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Display  
Overview  
“Play Mode”  
“iPod By Hand When set toON, allows you to operate iPod  
Mode”  
with the control on the iPod.  
On “”/ Off “”  
“Folder Random” When set toON, plays the music in the folder  
randomly. (Music only)  
On “”/ Off “”  
“All Random”  
“File Repeat”  
When set toON, plays all songs in iPod  
randomly. (Music only)  
On “”/ Off “”  
When set toON, plays the music repeatedly.  
On “”/ Off “”  
(
: Factory setting)  
4
5
Make a setting  
Press the [Volume] knob.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
Remarks  
• All Random  
The time required to turn on the all random function  
may become longer depending on the number of songs  
in iPod.  
Turning on the all random function changes the iPod  
browse item to “Songs. This browse item will not be  
changed even if the all random function is turned off.  
If the browse item is changed to search for music while  
the all random function is on, the all random function is  
turned off and the songs in the browse item are played  
at random.  
• iPod By Hand Mode (iPod Control by Hand Mode)  
Allows you to operate iPod with the control on the iPod.  
In the iPod Control by Hand Mode, controllable  
functions of iPod using this unit are those described in  
<Basic Operation>.  
|
8
KIV-BT900/ KIV-700  
 
iPod Setting  
Selecting the Search Mode  
You can select following iPod Setting items.  
You can select the most suited search method for  
the desired song.  
1
2
Select iPod source  
Search mode in Normal playing  
Enter Menu List mode  
Press the [MENU] button.  
Display  
Overview  
“Direct Search”  
You can quickly search the desired song by  
specifying its Search item (artist, album, etc.)  
and character.  
Searches for music of the same artist or genre  
as the one being played. (Music only)  
Registers a song to My Playlist and play it.  
3
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Settings.  
“Related Search”  
4
Select the setting item  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
“Recall My Playlist”  
“Delete My Playlist”  
“Register My Playlist”  
Display  
Overview  
“Settings”  
“Skip Search”  
Sets the ratio of skip performed with <Skip  
Search mode in Browsing  
“0.5%”/ “1%”/ “5%”/ “10%”  
Display the version of the firmware of this unit.  
Display  
“Direct Search”  
Overview  
“Device F/W  
Version”  
“Delete My  
Playlist”  
You can quickly search the desired song by  
specifying its Search item (artist, album, etc.)  
and character.  
You can select an alphabetic character from  
the list in the browse item (artist, album, etc.)  
selected now.  
The number of songs to be skipped is  
determined by the ratio of the total number of  
songs in the list which is selected now.  
Deletes the registered My Playlist.  
Refer to <My Playlist> (page 12) for the  
operation.  
“Delete One”/ “Delete All” “YES”/ “NO”  
Sets the audio book playback speed.  
“Slower”/ “Normal”/ “Faster”  
“Alphabet Search”  
“Skip Search”  
“Audiobook  
Speed”  
“Sound Check“ Sets the sound volume of all songs to the same  
level. The sound volume adjustment is required  
using iTunes.  
“ON”/ “OFF”  
(
: Factory setting)  
“Register My Playlist” Registers a song to My Playlist.  
5
6
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
1
2
Select iPod source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “iPod” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
Enter Search mode  
The setting of “Skip Search” in <iPod Setting> (page 9)  
and that in <USB Setting> (page 17) are always the same.  
Changing the setting of one reflects the other.  
Press the [SEARCH MODE] button.  
The search mode you can select changes  
depending on normal playback or browsing. For  
browsing operation, see <Selecting a Song by  
3
4
Select the Search mode  
Turn the [Volume] knob.  
Start the search mode  
Press the [Volume] knob.  
Cancelling Search mode  
Press the [SEARCH MODE ] button.  
English  
|
9
 
iPod/iPhone Operation  
Direct Search  
Characters that can be entered are alphabetical characters  
You can quickly search the desired song by  
specifying its Search item (artist, album, etc.) and  
character.  
(A to Z), numerical characters (0 to 9), and “ * .  
“ * ” indicates characters other than alphabetical and  
numerical characters. You cannot enter any more characters  
when entering “ * ” in the first character position.  
If the first character string begins with an article “a, an, or  
“the” in the Direct Search mode, it is searched for in defiance  
of the article.  
1
2
Select iPod source  
Enter Search mode  
Press the [SEARCH MODE] button.  
3
Enter Direct Search mode  
Turn the [Volume] knob and press it when the  
Related Search  
desired item is displayed.  
Searches for music of the same artist or genre as the  
one being played. (Music only)  
Select “Direct Search.  
4
Select the browse item  
Turn the [Volume] knob and press it when the  
desired browse item is selected.  
1
2
Play the music in iPod  
Press the [SEARCH MODE] button.  
Display  
Items  
Display  
Items  
3
Enter Related Search mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
“Music”  
“Videos”*1  
“Playlists”  
“Artists”  
Playlists  
Artists  
“Video  
Playlists”  
“Movies”  
“Music Videos” Music Videos  
“TV Shows” TV Shows  
“Video  
Video Playlists  
Movies  
Select “Related Search.  
“Albums”  
“Songs”  
Albums  
Songs  
4
Select the browse item  
Turn the [Volume] knob and press it when the  
“Podcasts”  
“Genres”  
Podcasts  
Genres  
Video Podcasts  
desired browse item is selected.  
Podcasts”  
“Rentals”  
“Composers” Composers  
“Audiobooks” Audio books  
*1 Name and number of items displayed in “Videos” are the  
same as the iPod.  
Display  
Browses music  
Rentals  
“Search Artist”  
“Search Album”  
Displays the album of the same artist.  
Displays music in the album in which the one  
being played is included.  
“Search Genre”  
Displays the artist of the same genre.  
5
6
Select the character to be searched for  
“Search Composer” Displays the album including music created by the  
same composer.  
Operation type  
Operation  
Move between items  
Select an item  
Turn the [Volume] knob.  
Press the [Volume] knob.  
After this step, you need to browse. See step 4 of  
select a song.  
Move to the next column  
Press the [4] or [¢] button.  
Up to 3 characters can be entered.  
Cancelling the Related Search  
Press the [SEARCH MODE] button.  
Determine the selected character  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “DONE.  
Related search cannot be performed while playing the  
video file.  
Start search. When the search is completed,  
the music search mode is selected again at the  
selected character position.  
When the music being played has no information on  
browsing items or no music was found, “Not Found” is  
displayed.  
After this step, you need to browse. See step 4 of  
select a song.  
Cancelling the Direct Search  
Press the [SEARCH MODE] button.  
|
10 KIV-BT900/ KIV-700  
   
Alphabet Search  
Skip Search  
You can select a song by alphabet. This function  
searches songs whose name contain the specified  
character(s) in the list of the selected Search item  
(artist, album, etc).  
You can scroll up or down according to the number  
of the selected Search items so that you can quickly  
switch the display position.  
1
2
Select iPod source  
1
2
Select iPod source  
Enter browsing mode  
Press the [MENU] button.  
Enter browsing mode  
Press the [MENU] button.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Music” or “Videos” > category > brows  
item.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Music” or “Videos” > category > brows  
item.  
3
4
Enter Skip Search mode  
3
4
Enter Alphabet Search mode  
Press the [SEARCH MODE] button.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Press the [SEARCH MODE] button.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Skip Search.  
Select “Alphabet Search.  
Search for item  
Search for item  
Operation type  
Move between items  
Select an item  
Operation  
Turn the [Volume] knob.  
Press the [Volume] knob.  
Operation type  
Operation  
Select the character  
Press the [DISP] or [ ] / [PLAY MODE]  
button.  
Skip Search  
Press the [DISP] or [ ] / [PLAY MODE]  
button.  
Move between items  
Select an item  
Return to previous item  
Turn the [Volume] knob.  
Press the [Volume] knob.  
Press the [MENU] button.  
Keep pressing the button for 3 seconds or  
longer skips songs at 10% irrespective of  
the setting.  
Sets the ratio of skip  
performed  
Return to previous item  
Press the [  
4] or [¢] button.  
Cancelling the Alphabet Search  
Press the [SEARCH MODE] button.  
Press the [MENU] button.  
The time of search by alphabet may become long  
depending on the number of songs or items in iPod.  
If the first character string begins with an article “a, an,  
or “the” in the Alphabet Search mode, it is searched for in  
defiance of the article.  
Cancelling the Skip Search  
Press the [SEARCH MODE] button.  
Set the ratio with “Skip Search” in <iPod Setting> (page 9).  
English  
|
11  
   
iPod/iPhone Operation  
Deleting a Song from the Playlist  
My Playlist  
1
2
Press the [SEARCH MODE] button.  
Allows you to register your favorite songs in the  
Playlist of this unit. You can register up to 30 songs  
in the Playlist.  
Enter Delete Playlist mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Delete My Playlist.  
Registering Songs in the Playlist  
1
2
Play the song you want to register  
3
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Press the [SEARCH MODE] button.  
Select ”Delete One” or ”Delete All.  
Selecting “Delete All” moves to step 5 and all songs  
are deleted.  
3
Register the song  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Register My Playlist.  
“## Stored (Registration number)” is displayed.  
4
5
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select the song you want to delete.  
Make a Playlist from the songs stored in one iPod. If you  
attempt to register a song stored in a different iPod, ”No  
Information” appears and then ”ALL Delete?” appears.  
Select “YES” to delete the Playlist when you want to  
remake it.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select ”YES.  
“Completed” is displayed.  
The song displayed in the Music Search mode can be  
registered in the same manner. For how to use the music  
search function, refer to <Selecting a Song by Browsing  
You can also delete all songs from the Playlist by  
selecting “Delete My Playlist” described in <iPod Setting>  
If you attempt to register the 31st song, ”Memory Full”  
appears and you cannot register it accordingly. To  
register the song, delete an unnecessary song.  
Do not register Podcasts. Songs you do not want to  
register may be registered, or playback may not be  
carried out correctly.  
If you connect the different iPod from one registered to  
My Playlist, “Delete One” and “Delete All” will not appear  
and all songs be deleted.  
Playing the Song in the Playlist  
1
2
Press the [SEARCH MODE] button.  
Enter My Playlist mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Recall My Playlist.  
3
Play the song in the Playlist  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select the song you want to play.  
Turning ACC OFF or the power OFF cancels the My  
Playlist mode.  
The ending of a song may be cut unless the song has a  
silence of 1 second or longer at the end.  
Random play cannot be performed during playback of a  
song in the Playlist.  
|
12 KIV-BT900/ KIV-700  
 
English  
|
13  
USB device/ Zune/ Internal Memory Operation  
When connecting the  
USB device, usage of  
the CA-U1EX (option) is  
recommended.  
SEARCH MODE  
SRC MENU Volume  
DISP  
4
38  
¢
/ PLAY MODE  
Multi card reader Drive Search  
Selecting the device inserted in the Multi Card  
Reader.  
Basic Operation  
Playing USB device  
1. Enter Menu List mode  
Press the [MENU] button.  
2. Select a drive  
• Connect a USB device  
When connected, the source is switched  
automatically and a song starts playing.  
Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select “Drive Select” > “Drive#.  
• Select USB/ Zune/ Internal memory source  
Press the [SRC] button. Turn the [Volume]  
knob and press it when the desired item is  
displayed.  
Switching display  
Press the [DISP] button to select display mode.  
Selects the Artwork small, Artwork large, Video or  
Clock.  
Select the “USB, Zune” or “Int.Mem.” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
The Video mode is displayed only when you  
have applied the parking brake.  
Moving to the next folder (Except for Music  
Editor media or Zune)  
Press the [SEARCH MODE] button.  
Display example of Artwork small mode  
Song Select  
Press the [4] or [¢] button.  
1
Fast Forwards or Fast Backwards  
4
Hold down the [4] or [¢] button.  
2
Pause and Play  
Press the [38] button to pause or resume  
playback.  
3
5
1 Song information (see <Customization of  
2 Play time and file number  
3 File format indicator  
4 Album art  
5 Play mode indicator (see <Display Indicator  
Remove USB device  
Press the [38] button for at least 2 seconds.  
The unit enters the USB REMOVE mode (“USB  
REMOVE” is displayed), and the USB device can be  
removed safely.  
USB Device select  
USB device may not be recognized when USB HUB  
is used. Switch to the device to be connected.  
1. Enter Menu List mode  
Press the [MENU] button.  
About Internal Memory  
Audio files, Video files or Picture files can be stored  
by copying from a USB device.  
• Built-in flash memory: 512 MB  
2. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select “Port Up.  
Repeat these steps to switch to the device to  
be connected.  
|
14 KIV-BT900/ KIV-700  
   
For example: Searching for ¡".  
Select “USB List” > 1 > 2 > ¡"  
File Search  
Selecting the file you want to listen to from the  
device being played now.  
1
2
¡"  
¡!  
¡#  
USB device/ Internal memory source  
Display  
Items  
Cancelling the Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
“USB List”/  
“Internal Memory  
List”  
Folder or file name list.  
Music Editor media  
When you search a song in the File Search mode, the unit  
memorizes the position of the song being played after the  
search. To set a different Menu item after searching a song,  
press the [MENU] button for at least 1 second to move to  
the first hierarchy.  
Display  
Items  
“Music”  
“Playlists”  
Playlists  
Artists  
Albums  
Songs  
“Artists”  
“Albums”  
“Songs”  
“Genres”  
Remarks  
• Displaying picture files  
Genres  
The playback of audio file continues even when a picture  
file is selected during playback. Pressing the [4] or [¢]  
button switches between picture files.  
Zune  
Display  
“Music”  
“Genres”  
Items  
Genres  
Artists  
Albums  
Songs  
“Artists”  
“Albums”  
“Songs”  
“Playlists”  
Playlists  
1
2
Select USB/ Zune/ Internal memory source  
Enter Menu List mode  
Press the [MENU] button.  
3
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “USB List, Internal Memory List” or  
“Music.  
4
Select a file  
Operation type  
Move between items  
Select an item  
Operation  
Turn the [Volume] knob.  
Press the [Volume] knob.  
Page up or down  
Press the [DISP] or [ ] / [PLAY MODE]  
button.  
Press the [DISP] or [ ] / [PLAY MODE]  
button for at least 1 second to continuously  
scroll. Press the button again to stop  
scrolling.  
Return to previous item  
Return to Top menu  
Press the [MENU] button.  
Press the [MENU] button for at least 1  
second.  
English  
|
15  
 
USB device/ Zune/ Internal Memory Operation  
Function of Zune/ Music Editor media  
Play Mode  
Skip Search  
You can select a Play Mode, such as Random play  
and Repeat play.  
You can scroll up or down according to the number  
of the selected Search items so that you can quickly  
switch the display position.  
1
2
Select USB/ Zune/ Internal memory source  
Enter Play Mode in the Menu List  
KIV-BT900: Press the [Volume] knob for at least  
1 second.  
1
2
Select USB or Zune source  
Enter File Search mode  
Press the [MENU] button.  
KIV-700: Press the [PLAY MODE] button.  
You can also select from “Play Mode” in Menu  
List mode.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Music” > item.  
3
Select the setting item  
Turn the [Volume] knob and press it when the  
3
4
Enter Skip Search mode  
desired item is displayed.  
Press the [SEARCH MODE] button.  
Display  
Overview  
Search for item  
“Play Mode”  
“File Scan”  
Operation type  
Move between items  
Select an item  
Operation  
Turn the [Volume] knob.  
Press the [Volume] knob.  
When set toON, plays the intro of the music in  
the folder successively.  
On “”/ Off “”  
“Folder Random” When set toON, plays the music in the folder  
Skip Search  
Press the [DISP] or [ ] / [PLAY MODE]  
button.  
randomly.  
Keep pressing the button for 3 seconds or  
longer skips songs at 10% irrespective of  
the setting.  
On “”/ Off “”  
“All Random”*1 When set toON, plays all songs in USB device  
randomly.  
Sets the ratio of skip  
performed  
Press the [  
4] or [¢] button.  
On “”/ Off “”  
“File Repeat”  
When set toON, plays the music repeatedly.  
On “”/ Off “”  
Return to previous item  
Press the [MENU] button.  
“Folder Repeat”*1 When set toON, plays the music in the folder  
After this step, see step 4 of <File Search> (page 15)  
to select a song.  
repeatedly.  
On “”/ Off “”  
Cancelling the Skip Search  
(
: Factory setting)  
*1 Not selectable when Music Editor media or Zune is used.  
Press the [SEARCH MODE] button.  
4
5
Make a setting  
Press the [Volume] knob.  
Set the ratio with “Skip Search” in <iPod Setting> (page 9).  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
|
16 KIV-BT900/ KIV-700  
   
Function of remote control  
USB Setting  
Direct Music Search  
You can select following USB Setting items.  
Searching the music by entering the file number.  
1
2
Select USB source  
1
2
3
Enter Direct Music Search mode  
Press the [DIRECT] button on the remote  
control.  
Enter Menu List mode  
Press the [MENU] button.  
3
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Settings.  
Enter the music number  
Press the number buttons on the remote  
control.  
4
Select the setting item  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Search the music  
Press the [4] or [¢] button.  
Cancelling Direct Music Search  
Press the [DIRECT] button.  
Display  
“Settings”  
Overview  
“Skip Search”*1 Sets the ratio of skip performed with <Skip  
Direct Music Search cannot be performed during playing of  
Zune/ “Music Editor” media, Random play, or scan play.  
“0.5%”/ “1%”/ “5%”/ “10%”  
“Device F/W  
Version”  
Display the version of the firmware of this unit.  
“Device F/W  
Update”  
Updates the firmware. The update information  
will be posted on the following URL as necessary.  
(
: Factory setting)  
*1 Selectable when Music Editor media or Zune is used.  
5
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
The setting of “Skip Search” in <iPod Setting> (page 9)  
and that in <USB Setting> (page 17) are always the same.  
Changing the setting of one reflects the other.  
English  
|
17  
   
USB device/ Zune/ Internal Memory Operation  
Function of USB source  
desired item is displayed.  
Select “EXIT.  
Returns to step 3 if “NEXT” is selected.  
Copying from USB device  
Copy files and folders from USB device to internal  
memory.  
If a folder is selected, the files in the folder are copied.  
Sub folders are not copied.  
USB  
(
]
)
(
]
Int Mem)  
¡File1  
Folder4  
¡File1  
^
If there is a file or folder with the same name, a message  
is displayed. If you select “OK, a number is added as  
“Name_001.  
]
]
¡
¡
¡
If there is not enough space for the selected files or  
folders, “MEMORY OVER” is displayed. Reduce the number  
of files to copy or erase unnecessary files in the USB  
memory.  
]
Folder4  
¡
]
^
:
An empty folder  
If copying is canceled or if space runs out while copying,  
the files copied up to that point remain.  
The displayed space is a rough estimate. The actual size  
may be smaller or greater.  
Audio files with DRM can be copied, but cannot be  
played.  
Depending on the digital audio player, it may not be  
able to copy files.  
When files are copied from Music Editor media, the  
copied audio files are played as normal audio file. Song  
selection using the Music Editor media function is not  
possible.  
Files may be lost if the engine is started while copying.  
Copy with the engine running.  
The file in the internal memory cannot be copied to  
another media.  
If a Hands-Free phone call is received while copying files  
from the USB device, the copying stops.  
Only the following controls can be used while copying,  
or erasing:  
¡
1
Select USB source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “USB” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
2
3
Enter Menu List mode  
Press the [MENU] button.  
Enter Copy mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Copy from USB.  
4
Select a file or folder to copy  
Operation type  
Move between items  
Select an item  
Operation  
Turn the [Volume] knob.  
Press the [Volume] knob.  
Press the [DISP] or [ ] / [PLAY MODE]  
button.  
- Volume  
- Attenuator  
- Power off  
High Speed Search  
Return to previous item  
Return to Top menu  
Press the [MENU] button.  
Press the [MENU] button for at least 1  
second, and then press it again briefly.  
When copying is interrupted  
If ACC is turned off while copying, a screen to  
confirm whether to continue copying appears next  
time ACC is turned on (Resume function).  
5
6
Determine the selected file or folder  
Press the [Volume] knob for at least 3 seconds.  
1
2
3
When “Continue USB Copy?” is displayed.  
Turn on the engine and then select “YES.  
Start copy  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “OK.  
Press the [Volume] knob.  
Copying resumes.  
“Completed” is displayed when copying completes.  
Cancelling copy  
1. Press the [Volume] knob.  
2. Turn the [Volume] knob and press it when  
the desired item is displayed. Select “YES.  
7
Exit Copy mode  
Turn the [Volume] knob and press it when the  
|
18 KIV-BT900/ KIV-700  
 
Function of Internal memory source  
Deleting file or folder  
Deleting Files in Memory  
1
2
Select Internal memory source  
Deleting Files in Memory.  
Enter Menu List mode  
Press the [MENU] button.  
Display  
Items  
“Settings”  
3
Enter Delete mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Settings” > “Internal Memory Delete.  
“Internal Memory Delete a folder or file.  
Delete”  
“Internal Memory Perform format to delete all files stored in  
Format”  
internal memory.  
4
Select a file or folder to delete  
Internal Memory Format  
Operation type  
Move between items  
Select an item  
Operation  
Turn the [Volume] knob.  
Press the [Volume] knob.  
Press the [DISP] or [ ] / [PLAY MODE]  
button.  
1
Select Internal memory source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “Int.Mem.” display.  
High Speed Search  
Return to previous item  
Return to Top menu  
Press the [MENU] button.  
Press the [MENU] button for at least 1  
second, and then press it again briefly.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
2
3
Enter Menu List mode  
5
6
Determine the selected file or folder  
Press the [Volume] knob for at least 3 seconds.  
Press the [MENU] button.  
Enter Internal memory Format mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Start deleting  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “OK.  
”Completed” is displayed when deleting completes.  
Canceling delete  
1. Press the [Volume] knob.  
2. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select “YES.  
Select “Settings” > “Internal Memory Format.  
4
5
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “YES.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
7
Exit Delete mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “EXIT.  
Returns to step 4 if “NEXT” is selected.  
English  
|
19  
 
USB device/ Zune/ Internal Memory Operation  
Function of USB or Internal memory source  
Function of USB or Internal memory source  
Picture File Viewing  
Wallpaper Downloading  
You can select and view a picture file in the device.  
You can use downloaded picture for the display of  
this unit.  
1
2
Select USB or Internal memory source  
1
Connect the USB device  
Connect the USB device containing the files to be  
Select a picture file  
See <File Search> (page 15) and select a picture file  
downloaded into this unit.  
A picture file can be downloaded from Internal  
memory.  
to be displayed.  
1. Press the [MENU] button.  
2. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select “USB List” or “Internal Memory List”  
> folder > picture file.  
2
Select files to be downloaded  
See <File Search> (page 15) and select the picture  
file to be downloaded.  
1. Press the [MENU] button.  
2. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select “USB List” or “Internal Memory List”  
> folder > picture file.  
To select a file  
Press the [4] or [¢] button.  
Slide show  
1
Enter Menu List mode  
Press the [MENU] button.  
3
Enter Menu List mode  
Press the [MENU] button.  
If the first hierarchy is displayed at this step, skip  
If the first hierarchy is displayed at this step, skip  
step 2 and proceed to step 3.  
2
3
Press the [MENU] button for at least 1 second to  
move to the first hierarchy.  
step 4 and proceed to step 5.  
4
5
Press the [MENU] button for at least 1 second to  
move to the first hierarchy.  
Select the slide show  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Slide” > “START” or “STOP.  
Start downloading  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Save as Wallpaper.  
When the downloading finishes, “Completed” is  
displayed.  
4
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
6
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
Cancelling the picture file  
Press the [DISP] button.  
Setting the downloaded picture as wallpaper  
Press [DISP] button to select Artwork small  
mode.  
The playback of audio file continues even when a picture  
file is selected during playback Cancel your picture file  
viewing to operate audio files.  
If picture files are started to play while playing a video file,  
the video play stops.  
The Slide show is displayed only when you have applied the  
parking brake.  
Set “Graphic Select” in <Customization of  
A wallpaper (picture file) cannot be downloaded during the  
slide show. Cancel the slide show, and then download a  
wallpaper.  
When a new wallpaper is downloaded, it will overwrite the  
currently downloaded wallpaper. There is no way to delete  
the downloaded pictures.  
|
20 KIV-BT900/ KIV-700  
   
English  
|
21  
Disc Changer Control (Optional)  
Play Mode  
SEARCH MODE  
DISP  
SRC MENU Volume  
You can select a Play Mode, such as Random play  
and Repeat play.  
1
2
Select CD changer source  
Enter Play Mode in the Menu List  
KIV-BT900: Press the [Volume] knob for at least  
1 second.  
4
38  
¢
/ PLAY MODE  
KIV-700: Press the [PLAY MODE] button.  
You can also select from “Play Mode” in Menu  
List mode.  
Basic Operation  
Select CD changer source  
3
Select the setting item  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “CD CH” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
Display  
Overview  
“Play Mode”  
“Track Scan”  
When set toON, plays the intro of the music on  
the disc successively.  
Moving to the next disc  
Press the [SEARCH MODE] button.  
On “”/ Off “”  
“Disc Random” When set toON, plays the music on the disc  
Song Select  
Press the [4] or [¢] button.  
randomly.  
On “”/ Off “”  
“Magazine  
Random”  
When set toON, plays the music in the disc  
changer randomly.  
On “”/ Off “”  
Fast Forwards or Fast Backwards  
Hold down the [4] or [¢] button.  
Pause and Play  
“Track Repeat” When set toON, plays the music repeatedly.  
On “”/ Off “”  
When set toON, plays the music on the disc  
repeatedly.  
Press the [38] button to pause or resume  
playback.  
“Disc Repeat”  
Switching display  
Press the [DISP] button to select display mode.  
Selects the Information or Clock.  
On “”/ Off “”  
(
: Factory setting)  
4
5
Make a setting  
Display example of information display mode  
Press the [Volume] knob.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
1
2
3
1 Song information (see <Customization of  
2 Play time and track number  
3 Play mode indicator (see <Display Indicator  
|
22 KIV-BT900/ KIV-700  
 
Function of remote control  
Direct Music Search  
Searching the music by entering the track number.  
1
2
3
Enter Direct Music Search mode  
Press the [DIRECT] button on the remote  
control.  
Enter the music number  
Press the number buttons on the remote  
control.  
Search the music  
Press the [4] or [¢] button.  
Cancelling Direct Music Search  
Press the [DIRECT] button.  
Direct Music Search cannot be performed during playing of  
Random play or scan play.  
Function of disc changer with remote control  
Direct Disc Search  
Searching the disc by entering the disc number.  
1
2
3
Enter Direct Disc Search mode  
Press the [DIRECT] button on the remote  
control.  
Enter the disc number  
Press the number buttons on the remote  
control.  
Search the disc  
Press the [FM+] or [AM–] button.  
Cancelling Direct Disc Search  
Press the [DIRECT] button.  
Direct Disc Search cannot be performed during Random  
play or scan play.  
Input “0” to select disc 10.  
English  
|
23  
   
Tuner Operation  
Tuner Setting  
SRC MENU  
SEARCH MODE  
Volume  
You can select following Tuner Setting items.  
1
2
Select Tuner source  
Enter Menu List mode  
Press the [MENU] button.  
3
Turn the [Volume] knob and press it when the  
desired item is displayed.  
4
¢
Select “Settings.  
Basic Operation  
4
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Selecting Tuner source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “TUNER” display.  
Display  
Overview  
“Settings”  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
“Seek Mode”  
Selects the tuning mode of the radio.  
“Auto1”: Automatic search for a station.  
“Auto2”: Search in order of the stations in the  
Preset memory.  
Selecting the Receiving Band  
1. Enter Menu List mode  
“Manual”: Normal manual tuning control.  
Press the [MENU] button.  
“Auto Memory” Memorizes 6 stations with good reception  
automatically.  
“YES”/ “NO”  
2. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select “FM1, FM2, FM3” or “AM.  
“TI”  
Switches to the traffic information automatically  
when the traffic bulletin starts.  
“ON”/ “OFF”  
Selecting the Receiving station  
Press the [4] or [¢] button.  
Details of the station selecting in operation are  
set in the “Seek Mode” of <Tuner Setting> (page  
24).  
“TAG Memory” Displays the tag memory usage of RDS station  
receiver. Up to 50 tags can be registered to  
this unit.  
“##/50”  
“Tagging”  
Turns ON / OFF the tag memory function of RDS  
station receiver.  
Switching display  
Press the [DISP] button to select display mode.  
Selects the Information or Clock.  
”ON”/ “OFF”  
“Forced MONO” Reduces the noise when stereo broadcasts are  
received as monaural.  
“ON”/ “OFF”  
Display example of information display mode  
(
: Factory setting)  
5
6
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
1
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
2
and then press it again briefly.  
1 Station information (see <Customization of  
Remarks  
• Forced MONO  
2 Status indicator (see <Display Indicator items>  
Strong electrical fields (such as from power lines) may  
cause unstable sound quality when it is set to ON. In such  
a situation, turn it OFF.  
• Traffic information (TI)  
Turns ON or OFF the Traffic Information function.  
When the function is set to ON, “TI” indicator is ON.  
If traffic bulletin starts when the function is ON,  
|
24 KIV-BT900/ KIV-700  
   
Traffic INFO” is displayed and traffic information is  
received.  
If the volume is adjusted during reception of traffic  
information, the adjusted volume is memorized  
automatically. The memorized volume will be applied next  
time the Traffic Information function is turned ON.  
Auto Memory Entry  
Putting stations with good reception in the memory  
automatically.  
1
2
3
Select the radio band you wish to store in the  
preset memory  
Enter Menu List mode  
Press the [MENU] button.  
Station Preset Memory  
Putting a station in the memory.  
Enter Auto Memory Entry mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
1
Select the radio band and tune in a desired  
radio station you wish to store in the preset  
memory  
Select “Settings” > “Auto Memory.  
4
Open Auto Memory Entry  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “YES.  
When 6 stations that can be received are put in the  
memory, auto memory entry closes.  
2
3
Enter Menu List mode  
Press the [MENU] button.  
Enter Preset Memory mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “List & Memory.  
4
Select the number to put in the memory  
Turn the [Volume] knob and press it for at least  
2 seconds when the desired item is displayed.  
Select a preset number.  
Preset Tuning  
Recalling the stations in the memory.  
1
2
Select the radio band  
Display  
“List & Memory”  
“-1”  
Overview  
Select a desired station in the memory  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Preset number 1.  
Preset number 2.  
“-2”  
Select “List & Memory” > Preset number.  
“-6”  
Preset number 6.  
English  
|
25  
     
Tuner Operation  
Function of remote control  
iTunes Tagging  
Direct Access Tuning  
Using an iTunes Tagging enabled RDS station  
receiver you can tag your music. When you hear a  
song you enjoy on your local RDS station, you only  
have to press the [SEARCH MODE] button. The  
song’s information will then be saved on this unit.  
The saved songs will then show up in a playlist  
called “Tagged” in iTunes the every next time you  
sync your iPod to your computer. So then you just  
need to click and then easily buy and download  
the song you were tagging directly from the Apple  
iTunes Music Store.  
Tuning in a desired radio station by entering the  
frequency.  
1
2
Select the radio band  
Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote  
control.  
“– – – –” is displayed.  
3
Enter the frequency  
Press the number buttons on the remote  
control.  
Example:  
1
Enter iTunes tagging mode  
Press the [SEARCH MODE] button.  
” will be displayed when song information  
TAG  
Desired frequency Press button  
can be registered.  
92.1 MHz (FM)  
810 kHz (AM)  
[9], [2], [1]  
[8], [1], [0]  
Turn “ON” the “TAGGING” of <Tuner Setting> (page 24)  
when using this function.  
Up to 50 TAGs (song’s information) can be registered to  
this unit. When iPod is connected, the TAG information  
registered to this unit is transferred to the connected  
iPod.  
4
Tune in to the entered frequency  
Press the [4] or [¢] button.  
Cancelling Direct Access Tuning  
Press the [DIRECT] button on the remote  
control.  
The memory usage can be checked by selecting “TAG  
MEMORY” of <Tuner Setting> (page 24).  
|
26 KIV-BT900/ KIV-700  
 
PTY (Program Type)  
Program Type Preset  
Selecting the Program Type below and searching  
for a station.  
Putting the Program Type in the Preset button  
memory and quick recall.  
Program Type Display  
Program Type Display  
Presetting the Program Type  
Speech  
Music  
News  
“Speech”  
“Music”  
“News”  
Soft  
“Soft”  
1
2
3
Select the Program Type to preset  
Nostalgia  
Jazz  
“Nostalga”  
“Jazz”  
Information  
Sports  
Talk  
“Inform”  
“Sports”  
“Talk”  
Classical  
R & B  
“Classicl”  
“R & B”  
Enter Program Type Preset mode  
Press the [SEARCH MODE] button.  
Soft R & B  
Language  
“Soft R&B ”  
“Language”  
Select the number to put in the memory  
Turn the [Volume] knob and press it for at least  
2 seconds when the desired item is displayed.  
Select the preset number.  
Rock  
“Rock”  
Classic Rock  
Adult Hits  
Soft Rock  
Top 40  
Country  
Oldies  
“Cls Rock”  
“Adlt Hit”  
“Soft Rck”  
“Top 40”  
“Country”  
“Oldies”  
Religious Music “Rel Musc”  
Religious Talk “Rel Talk”  
Personality  
Public  
“Persnlty”  
“Public”  
Recalling the preset Program Type  
College  
Weather  
“College”  
“Weather”  
1
2
3
Enter PTY mode  
Speech and Music include the Program type shown  
below.  
Enter Program Type Preset mode  
Press the [SEARCH MODE] button.  
Speech: Items in the white letters.  
Music: Items in the black letters.  
Select a desired Program Type in the memory  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
1
2
Enter Menu List mode  
Press the [MENU] button.  
Select the preset number.  
Select the FM band  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “FM1, FM2, or “FM3.  
3
4
Enter Menu List mode  
Press the [MENU] button.  
Enter PTY mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “PTY Search.  
5
6
7
Select the Program Type  
Turn the [Volume] knob.  
Search for the selected Program Type station  
Press the [4] or [¢] button.  
Exit PTY mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
This function cannot be used during a traffic bulletin or  
AM reception.  
When the selected Program Type is not found, “No PTY”  
is displayed. Select another Program Type.  
The operation ends automatically if you do not operate  
within 30 seconds.  
English  
|
27  
 
Function of KIV-700 with KCA-BT300/BT200 (Optional Accessory)  
Bluetooth Audio Operation  
Basic Operation  
SRC MENU  
Volume  
Selecting Bluetooth Audio source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “BT AUD EXT” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
4
38  
¢
Pause and play  
Press the [38] button.  
Connecting a Bluetooth Device  
Music Search  
Press the [4] or [¢] button.  
Before using the Bluetooth device, you need to  
connect Bluetooth device to this unit.  
Switching display  
Press the [DISP] button to select display mode.  
Selects the Information or Clock.  
Pairing (Registering from Bluetooth devices)  
To make your Bluetooth Audio player usable with  
this unit, you need to register it (pairing).  
Display example of information display mode  
1
Turn on this unit  
Press the [SRC] button.  
2
Start registering this unit by operating the  
Bluetooth device  
1
By operating the Bluetooth device, register the  
audio player (pairing). Select “KCA-BT300”/ “KCA-  
BT200” from the list of connected units.  
1 Song information*1  
(Only with KCA-BT300 (optional accessory)  
connected)  
3
4
Enter a PIN code  
Input the PIN code (“0000”) in the Bluetooth  
device.  
Check that registration is complete on the  
Bluetooth device.  
PIN code is set to “0000” as the default. You can  
change this code. Refer to <Registering PIN  
*1 If the Bluetooth Audio player supports AVRCP1.3  
profile, these items can be displayed.  
All or some of the operations above cannot be  
performed if the Bluetooth audio player is not ready for  
remote control.  
By operating the Bluetooth device, start  
Bluetooth connection.  
Switching between Bluetooth audio sources does  
not start or stop playback automatically. Perform the  
operation for starting or stopping playback.  
Some audio players cannot be controlled remotely or  
reconnected after Bluetooth disconnection. Operate the  
main unit of the audio player to connect Bluetooth.  
If pairing does not succeed, try followings.  
– PIN code is set to “0000. See <Registering PIN Code>  
– Turn off the power of this unit and turn it back on. And  
then try the pairing operation again.  
– If other audio players have been registered, delete  
them. And then try the pairing operation again. See  
When registering from this unit, refer to <Registering  
For details on the Bluetooth Audio player which can be  
connected, see <About the Bluetooth Audio player> in  
the instruction manual of the Bluetooth Unit.  
|
28 KIV-BT900/ KIV-700  
English  
|
29  
Function of KIV-BT900  
KIV-700 with KCA-BT300/BT200 (Optional Accessory)  
Operation of Hands-Free Phoning  
SRC MENU Volume  
DISP  
When registering from this unit, refer to <Registering  
For details on the Bluetooth cell-phone with the hands-  
free function, see <About the Cell-Phone> (page 67).  
Receiving a Call  
4
38  
¢
/ PLAY MODE  
Answering a Phone Call  
Connecting a Bluetooth Device  
Press the [Volume] knob.  
Before using the Bluetooth device, you need to  
connect Bluetooth device to this unit. The following  
3 steps procedure is necessary.  
The following operations disconnect the line:  
- Connect a USB device.  
The name of the calling party is displayed if it has already  
been registered in the Phone Book.  
Step 1. Pairing (Registering from Bluetooth  
devices)  
To make your Bluetooth device (cell-phone) usable  
with this unit, you need to register it (pairing).  
Rejecting an Incoming Call  
Press the [SRC] button or press the [ ] / [PLAY  
MODE] button for at least 1 second.  
1
2
Turn on this unit  
Press the [SRC] button.  
During a Call  
Start registering this unit by operating the  
Bluetooth device  
Disconnecting a Call  
Press the [SRC] button or press the [ ] / [PLAY  
MODE] button for at least 1 second.  
By operating the Bluetooth device, register the  
hands-free unit (pairing). Select “KENWOOD BT  
USB/R-3P1”/ “KCA-BT300”/ “KCA-BT200” from the list  
of connected units.  
Switching to the Private Mode  
Press the [38] button.  
Switches between Private talk (“PRIVATE”) and  
Hands-free talk each time this button is pressed.  
3
Enter a PIN code  
Input the PIN code (“0000”) in the Bluetooth  
device.  
Check that registration is complete on the  
Bluetooth device.  
PIN code is set to “0000” as the default. You can  
change this code. Refer to <Registering PIN  
Depending on the type of your cell-phone, switching  
to the private talk mode may select the source that was  
used before commencing the hands-free connection.  
If this happens, the source cannot be switched back to  
the hands-free talk mode by operating this unit. Operate  
your cell-phone to return to the hands-free talk mode.  
4
By operating the Bluetooth device, start hands-  
free connection.  
Adjusting the Voice Volume during a Call  
Turn the [Volume] knob.  
Step 2. Connection  
If you have registered 2 or more cell-phones, you  
need to select one of them. For more details, see  
When a cell-phone is connected, the “BT” indicator  
is light up.  
Step 3. Hands-free phoning  
You can do hand-free phoning when the  
connection is made.  
|
30 KIV-BT900/ KIV-700  
Call Waiting  
Making a Call  
1
Enter Bluetooth mode  
Answering Another Incoming Call with the  
Current Call Suspended  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
Select “Answer.  
2
Select a dialing method  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Answering another Incoming Call after  
Terminating the Current Call  
Press the [SRC] button or press the [ ] / [PLAY  
MODE] button for at least 1 second.  
Display  
Overview  
Preset Call” Calling a number in the preset.  
Phonebook” Selecting the character to be searched for the  
phone book.  
Continuing the Current Call  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
In Call”  
Out Call”  
Calling a number in the incoming call list.  
Calling a number in the outgoing call list.  
Select “Reject.  
Missed Call” Calling a number in the missed calls list.  
Number Dial” Making a call by entering phone number.  
Answering the Waiting Call after Terminating  
the Current Call  
Press the [SRC] button or press the [ ] / [PLAY  
MODE] button for at least 1 second.  
Operation method of each mode is described  
below.  
3
Exit the dialing method mode  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
Switching between the Current Call and Waiting  
Call  
Press the [Volume] knob.  
Each pressing of this knob switches the calling  
party.  
Speed Dialing (Preset Dial)  
Other Functions  
1
2
3
Enter Bluetooth mode  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
Clearing the Disconnection Message  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
Select the preset dial mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
“HF Disconnect” disappears.  
Select “Preset Call.  
Select the number you want to recall from the  
memory  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select the preset number.  
Phone number is displayed.  
4
Make a call  
Press the [Volume] knob.  
You need to register the preset dial number. Refer to  
English  
|
31  
 
Function of KIV-BT900  
KIV-700 with KCA-BT300/BT200 (Optional Accessory)  
Operation of Hands-Free Phoning  
Calling a Number in the Phone Book  
The outgoing call list and the incoming call list, and the  
1
2
3
Enter Bluetooth mode  
missed call list are the lists of calls originated from and  
received at this unit. They are not the ones stored in the  
cell-phone memory.  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
Select the Phone Book mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Dial a Number  
1
2
3
Enter Bluetooth mode  
Select “Phonebook.  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
Select the character to be searched for  
Operation type  
Operation  
Select the number dial mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Move to the next character. Turn the [Volume] knob.  
Determine the selected  
character.  
Press the [Volume] knob.  
Select “Number Dial.  
4
5
Select the name or phone number  
Turn the [Volume] knob.  
Switching between Display Modes  
Press the [DISP] button.  
Pressing this button each time switches between  
name and telephone number.  
Enter a phone number  
Operation type  
Operation  
Turn the [Volume] knob.  
Select the numbers.  
Move to the next digit.  
Delete the last digit.  
Press the [  
Press the [  
¢
] button.  
] button.  
4
Make a call  
Press the [Volume] knob.  
• Press the number ([1] – [0]), #([FM]), *([AM]), or  
+([¢]) button on the remote controller.  
To erase the entered phone number digit  
by digit:  
During search, a non-accent character such as “u” is  
searched for instead of an accent character such as “ü.  
Press the [4] button on the remote  
controller.  
4
Make a call  
Calling a Number in the Call log  
• Press the [Volume] knob.  
• Press the [DIRECT] button on the remote  
controller.  
1
Enter Bluetooth mode  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
You can input max 25 (KIV-BT900)/ 32 (KIV-700) digits.  
2
Select the call log mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Out Call” (outgoing call), “In Call”  
(incoming call), or “Missed Call” (missed call).  
3
4
Select a name or phone number  
Turn the [Volume] knob.  
Switching between Display Modes  
Press the [DISP] button.  
Pressing this button each time switches between  
name and telephone number.  
Make a call  
Press the [Volume] knob.  
|
32 KIV-BT900/ KIV-700  
     
Make a Voice Dialing Call  
Registering to the Preset Dial Number  
List  
1
Enter voice recognition mode  
KIV-BT900: Press the [ ] button for at least 1  
second.  
1
Select the phone number you wish to register  
Select the phone number with reference to the  
following:  
KIV-700: Press the [VOL] button for at least 1  
second.  
2
3
“Phonebook Name?” is displayed.  
When a beep is heard, say the name within 2  
seconds.  
2
3
Enter Preset Memory mode  
Press the [Volume] knob for at least 2 seconds.  
“Phonebook Type?” is displayed.  
When a beep is heard, say the category name  
within 2 seconds.  
Select the preset number to put in the  
memory  
4
Make a call  
Press the [Volume] knob.  
Turn the [Volume] knob.  
Select the preset number.  
This step is the same as step 4 of the procedure  
32). You can make a call or select a category.  
4
Determine the preset number to put in the  
memory  
Press the [Volume] knob for at least 2 seconds.  
Exit the Preset Memory mode  
If your voice cannot be recognized, a message is  
displayed. Pressing the [Volume] knob allows you to retry  
voice input. Refer to <Troubleshooting Guide> (page 80).  
Both the name and category require registration of  
a voice tag. Refer to <Setting a Voice Command for  
Press the [MENU] button.  
Display of Phone Number Type  
(category)  
Audio sound is not output during voice recognition.  
The category items in the Phone Book are displayed  
as follows:  
Display  
Information  
“General”/“  
General  
“Home”/“  
“Office”/“  
“Mobile”/“  
“Other”/“  
Home  
Office  
Mobile  
Other  
English  
|
33  
   
Display Settings  
SRC MENU Volume  
DISP  
Display  
Overview  
“Settings”  
“Display &  
Illumination”  
“Display Select” Selecting and customizing the Display type.  
Making Display and Illumination settings.  
“Display Off  
Mode”  
If this unit is not operated at least 5 seconds  
with“OFF”selected, the display turns off. During  
a setup mode, the display will not turn off even  
if 5 seconds lapse.  
“ON”/ “OFF”  
Basic Operation  
“Display  
Dimmer”  
Reduces the display Illumination brightness.  
“Auto”: Dims the illumination in conjunction  
with the Light switch of the vehicle.  
“OFF”: Does not dim the illumination.  
Specifies whether the text is scrolled  
automatically.  
Switching display  
Press the [DISP] button.  
“Text Scroll”  
Mode  
Display Type  
Artwork small  
Displays song information. (Only for iPod/ USB/  
Zune/ Internal Memory source)  
“Auto”/ “Manual”  
“Key Color  
Select”  
Selecting the Illumination Color of the panel.  
Reduces the key Illumination brightness.  
“Auto”: Dims the illumination in conjunction  
with the Light switch of the vehicle.  
“Manual1”: Dims the illumination constantly.  
“Manual2”: Dims the illumination darker than  
Manual 1.  
Artwork large  
Displays artwork and song information, etc.,  
separately. (Only for iPod/ USB/ Zune/ Internal  
Memory source)  
Displays video of a video file. (Video file only)  
Displays station information, etc. (Except for iPod/  
USB/ Zune/ Internal Memory source)  
Displays the clock.  
“Key ILLUMI  
Dimmer”  
Video*1  
Information  
Clock  
*1 The Video mode is displayed only when you have  
applied the parking brake.  
“OFF”: Does not dim the illumination.  
“ILLUMI Effect” Sets whether the key illumination brightness is  
changed in conjunction with the key operation.  
“ON”/ “OFF”  
Text scroll  
Press the [DISP] button for at least 1 second.  
The displayed text scrolls.  
“ILLUMI Music Sets whether the key illumination brightness is  
SYNC”  
changed in conjunction with the sound volume.  
“ON”/ “OFF”  
“Aspect Set”*1 Sets the aspect ratio of video files.  
Display Setting  
“Full”: Displays in Wide screen by 16:9 aspect  
ratio.  
“Normal”: Displays in Standard screen by 4:3  
aspect ratio.  
You can select following Display Setting items.  
1
Select the source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
“Monitor Setup”  
“Brightness” Adjusting the display Brightness.  
“-3” – “0” – “+3”  
“Contrast” Adjusting the display contrast.  
“-3” – “0” – “+3”  
2
3
Enter Menu List mode  
Press the [MENU] button.  
(
: Factory setting)  
*1 Only for iPod/ USB/ Internal Memory source.  
Enter Display Setting mode  
Turn the [Volume] knob and press it when the  
5
6
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
desired item is displayed.  
Select “Settings” > “Display & Illumination.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
4
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
|
34 KIV-BT900/ KIV-700  
 
Illumination Color Selection  
Customization of Clock Display  
Selecting the Illumination Color of the panel.  
You can customize the display of the Clock Display  
mode.  
1
Enter Menu List mode  
Press the [MENU] button.  
1
Select the source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
2
Enter Illumination color selection mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Settings” > “Display & Illumination” >  
“Key Color Select.  
2
3
Enter Menu List mode  
Press the [MENU] button.  
3
Select the Illumination Color  
Turn the [Volume] knob and then press the  
[Volume] knob when the desired item is  
displayed.  
Enter Display Setting mode and Select the  
Clock Display  
Turn the [Volume] knob and press it when the  
Select the color from “Variable Scan”/ “Color1” —  
desired item is displayed.  
“Color 10”/ “User.  
Select “Settings” > “Display & Illumination”  
> “Display Select” > “Type Select” > Clock  
Display.  
Creating “User” color  
You can create your original color during the  
selection from “Color1” — “Color10.  
The color you created can be called when you  
select “User.  
4
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
1. Press the [Volume] knob for at least 1 second.  
Enter the detail color adjustment mode.  
2. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select the color to adjust. (red, green, or  
blue).  
Display  
“Display Select”  
“Type Select” Selects the Clock Display mode.  
“Text Select” Sets the text display.  
“Graphic  
Select”  
Setting  
Switches between single and dual clock and  
between analog and digital display.  
3. Turn the [Volume] knob to adjust color  
(Range: 0 – 9), and then press the [Volume]  
knob.  
4. Press the [Volume] knob for at least 1 second.  
Exit the detail color adjustment mode.  
5
6
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
4
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
English  
|
35  
   
Display Settings  
Text Display Selection  
In FM Tuner source  
Customization of Display  
You can customize the display of the Artwork small,  
Artwork large, or Information mode.  
Frequency & Program Service  
name (“Frequency/PS”)  
Song title*1 (“Song Title”)  
Artist name*1 (“Artist Name”)  
Station name*1 (“Station Name”) Spectrum analyzer (“Speana”)  
Blank (“Blank”)  
Radio text plus*1 (“Radio Text  
Plus”)  
Radio text (“Radio Text”)  
Date (“Date”)  
1
Select the source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
*1 Information of Radio text plus is displayed.  
2
3
Enter Menu List mode  
Press the [MENU] button.  
In AM Tuner source  
Frequency (“Frequency”)  
Date (“Date”)  
Spectrum analyzer (“Speana”)  
Blank (“Blank”)  
Enter Display Setting mode and Select the  
Information Display  
Turn the [Volume] knob and press it when the  
In USB/ iPod/ Internal Memory source  
Song title (“Song Title”)  
My rate (“My rate”) : iPod only  
Date (“Date”)  
Spectrum analyzer (“Speana”)  
Blank (“Blank”)  
desired item is displayed.  
Artist name (“Artist Name”)  
Album name (“Album Name”)  
Folder name (“Folder Name”)  
File name (“File Name”)  
Select “Settings” > “Display & Illumination”  
> “Display Select” > “Type Select” > Artwork  
small, Artwork large, or Information.  
4
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
In Auxiliary input source  
Source name (“Source Name”)  
Date (“Date”)  
Spectrum analyzer (“Speana”)  
Blank (“Blank”)  
Display  
Setting  
“Display Select”  
In Standby  
“Type Select” Selects from Artwork small, Artwork large, or  
Information mode.  
“Side Select”*1 Sets the icon display.  
Appear/ Disappear  
Source name (“Source Name”)  
Date (“Date”)  
Blank (“Blank”)  
In Bluetooth audio source (Optional : KIV-700 only)  
“Text Select” Sets the text display.  
Bluetooth audio (“Source Name”) Date (“Date”)  
“Graphic  
Changes the wallpaper.  
Song title*1 (“Song Title”)  
Spectrum analyzer (“Speana”)  
Blank (“Blank”)  
Select”*1  
Original/ User Wallpaper*2  
Artist name*1 (“Artist Name”)  
Album name*1 (“Album Name”)  
*1 Only for Artwork small or Information mode.  
*1 Only with KCA-BT300 (optional accessory) connected  
5
6
Make a setting  
In Disc changer source (Optional)  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
When selecting “Text Select”:  
1. Turn the [Volume] knob to select the text  
display part, and then press the [Volume]  
knob.  
Source name (“Source Name”)  
Disc title (“Disc Title”)  
Track title (“Track Title”)  
Date (“Date”)  
Spectrum analyzer (“Speana”)  
Blank (“Blank”)  
In HD Radio source (Optional)  
Frequency (“Frequency”)  
Artist name*1 (“Artist Name”)  
Date (“Date”)  
Spectrum analyzer (“Speana”)  
Blank (“Blank”)  
2. Turn the [Volume] knob to select the text,  
and then press the [Volume] knob.  
Station name (“Station Name”)  
Song title (“Song Title”/“Title”)  
Album name*1 (“Album Name”)  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
*1 Only with KTC-HR300 (optional accessory) connected  
and then press it again briefly.  
|
36 KIV-BT900/ KIV-700  
 
In SIRIUS source (Optional)  
Auxiliary Input Display Setting  
Channel Name (“Channel Name”) Band & Channel Number  
Selecting the display when changing to Auxiliary  
input source.  
(“Channel Number”)  
Date (“Date”)  
Spectrum analyzer (“Speana”)  
Blank (“Blank”)  
Song Title (“Song Title”)  
Artist name (“Artist Name”)  
Composer name (“Composer  
Name”)  
Category Name (“Category  
Name”)  
1
Select the AUX source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “AUX” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
In XM source (Optional)  
Channel Name (“CHANNEL  
NAME”)  
Song title (“SONG TITLE”)  
Artist name (“ARTIST NAME”)  
Category Name (“CATEGORY”)  
Band & Channel Number  
(“CHANNEL NUMBER”)  
Date (“Date”)  
Spectrum analyzer (“Speana”)  
Blank (“Blank”)  
2
3
Enter Menu List mode  
Press the [MENU] button.  
Enter Auxiliary input display setting mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Settings” > “Name Set.  
If the selected display item does not have any information,  
alternative information is displayed.  
4
5
Select the Auxiliary input display  
Turn the [Volume] knob.  
Select “AUX, DVD, PORTABLE, GAME, VIDEO, or  
Some items cannot be selected depending on the display  
type and row.  
When selecting “Folder Name” while playing with iPod,  
names will be displayed depending on currently selected  
browsing items.  
“TV.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
If the iPod Control by Hand Mode is set to on while playing  
the iPod, “iPod By Hand Mode” is displayed.  
If all characters cannot be displayed while playing with iPod,  
the file number in the list is displayed.  
The Auxiliary input display can be set only when the  
built-in auxiliary input or the auxiliary input of optional  
KCA-S220A is used. On the KCA-S220A, “AUX EXT” is  
displayed by default.  
Information  
Music title  
Folder name  
File name  
Display  
“TITLE***”  
“FLD***”  
“FILE***”  
AUX source is initially set to “OFF. Before display setting,  
set “Built in AUX” described in <Initial Settings> (page 38)  
to “ON.  
English  
|
37  
 
Clock and Other Functions  
5
6
7
Select Summer Time  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Summer Time” > “ON” or “OFF.  
SRC MENU Volume  
Enter Date adjustment mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Date Adjust.  
Adjusting Date  
1. Turn the [Volume] knob and press it when  
Clock and Date Adjustment  
the desired item is displayed.  
Select month, day or year.  
2. Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
3. Press the [MENU] button.  
You can adjust the clock and date.  
Display  
Overview  
“Settings”  
“Clock & Date”  
“Clock Adjust”*1  
Sets the clock and Time zone.  
8
9
Enter Date format mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Date Mode.  
“Time Synchronized” Synchronizing the RDS station time data  
and this unit’s clock.  
“ON”/ “OFF”  
Advances the clock one hour when set  
“Summer Time”*1  
to ON.  
“ON”/ “OFF”  
Select Date format  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select from 7 types.  
“Sub Clock Adjust” Adjusts the time difference caused by  
summer time.  
“-1h”/ “0h”/ “+1h”  
“Date Adjust”  
“Date Mode”  
Sets the date.  
Sets the date display mode.  
10Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
(
: Factory setting)  
*1 The “Time Synchronized” is set to “OFF.  
Remarks  
• Time zone  
1
2
Enter Menu List mode  
Press the [MENU] button.  
Set a time zone for your area as “Home. When you set a  
time zone for different area to the “Sub, clocks for two  
time zones can be displayed on the clock display. See  
For time zone list, see <Time zone list> (page 72).  
Select RDSs automatic time adjustment  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Settings” > “Clock & Date” > “Time  
Synchronized” > “ON” or “OFF.  
When selected “OFF, proceed to step 3.  
When selected “ON, proceed to step 6.  
Initial Settings  
You can select following Initial Setting items.  
3
4
Enter Clock adjustment mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
1
Select the Standby  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “STANDBY” display.  
Select “Clock Adjust.  
Adjusting Clock and Time zone  
1. Turn the [Volume] knob and press it when  
the desired item is displayed.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
Select hours, minutes or time zone (home or  
sub).  
2
Enter Menu List mode  
Press the [MENU] button.  
2. Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
3. Press the [MENU] button.  
|
38 KIV-BT900/ KIV-700  
   
3
4
Enter Initial Setting mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Initial Settings.  
Demonstration Mode Setting  
Turning the demonstration mode ON/OFF.  
1
2
Enter Menu List mode  
Press the [MENU] button.  
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Enter Demonstration mode setting  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Display  
Overview  
Select “DEMO Mode.  
“Initial Settings”  
“Source Select” Sets the source selection method.  
3
4
Set the Demonstration mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
“1”/ “2”  
“Beep”  
Setting the operation check sound (beep sound)  
ON/OFF.  
Select “ON” or “OFF.  
“ON”/ “OFF”  
“Menu Language You can select the display language for the  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
Select”  
Menu list item.  
“English”/ “Français”/ “Español”  
When this is set to ON, AUX source can be  
selected.  
“Built in AUX”  
“ON”: Allows AUX source to be selected. Use  
this setting when the built-in AUX terminal  
is connected to the external equipment all  
the time.  
“OFF”: Disable AUX source selection. Use this  
setting when the built-in AUX terminal is  
not used.  
Function of KIV-700  
Muting Volume upon Reception of  
Phone Call  
The audio system automatically mutes when a call  
comes in.  
“Favorite Delete” Deletes Favorite Preset Memory.  
When a call comes in  
“CALLis displayed.  
The audio system pauses.  
“Built in AMP”  
Selecting“OFF”turns off the built-in amplifier.  
Turning off the built-in amplifier improves the  
quality of the sound from Preout.  
“ON”/ “OFF”  
Listening to the audio during a call  
Press the [SRC] button.  
The “CALLdisplay disappears and the audio system  
“AV Out Set”  
Changes the iPod setting from AV Output to  
output-only terminal.  
comes back ON.  
“ON”/ “OFF”  
When the call ends  
Hang up the phone.  
The “CALLdisplay disappears and the audio system  
comes back ON.  
“System F/W  
Update”  
Updates the firmware. The update information  
will be posted on the following URL as  
necessary.  
(
: Factory setting)  
To use the TEL Mute feature, you need to hook up the MUTE  
wire to your telephone using a commercial telephone  
76).  
5
6
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
English  
|
39  
 
Audio Adjustments  
“2Zone Select”  
“2Zone Front/Rear”  
“Preset”  
Sets the Dual Zone System.  
SRC MENU Volume  
Sets the audio preset.  
(
: Factory setting)  
1
Select the source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select a source other than “STANDBY.  
Audio Control  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
You can adjust following Audio Setting items.  
Display  
“Subwoofer Level”  
Overview  
You can set subwoofer level.  
“–15” — “0” — “+15”  
“Bypass”: Disables the DSP function.  
“Through”: Enables the DSP function.  
Sets the sound quality.  
2
3
Enter Audio Control mode  
Press the [Volume] knob.  
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
“DSP Set”  
“Equalizer”  
Sets the Bass Boost level in two steps.  
“OFF”/ “STEP1”/ “2”  
Compensates the low volume or bass sound  
being lost by road noises to make vocal sound  
clearer.  
4
5
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
“BassBoost”  
“HIGHWAY-SOUND”  
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
“OFF”/ “STEP1”/ “2”/ “3”  
Remarks  
• DSP Set  
“Supreme+”  
“Position”  
Turns ON/OFF the Supreme plus function.  
Can be set while USB, iPod and Internal  
Memory source.  
When “DSP Set” is set to “Bypass, the DSP function is  
disabled , and the colored items cannot be set.  
“ON”/ “OFF”  
• HIGHWAY-SOUND  
Compensates the sound environment in  
accordance with the listening position.  
42).  
Adjusts left/right speaker balance.  
(Left) “L15” — “0” — “R15” (Right)  
Adjusts front/rear speaker balance.  
(Rear) “R15” — “0” — “F15” (Front)  
Increases the volume of faintest sound being lost by road  
noises to make the sound more audible. Additionally, it  
accentuates bass sound being lost by road noises to make  
the bass sound more dynamic.  
HIGHWAY-SOUND is not available in tuner source and  
HD Radio source.  
“Balance”  
“Fader”  
• Supreme+ (Supreme Plus)  
Technology to extrapolate and supplement with  
proprietary algorithm, the high-frequency range that is cut  
off when encoding. The bass and vocal sound that are cut  
off by encoding are supplemented for the reproduction  
of natural sound quality. Supplementing is optimized by  
compression format and processed according to bit rate.  
The effect is negligible with music that is encoded at high  
bit rate, variable bit rate or has minimal high frequency  
range.  
“2Zone Rear Volume” Refer to <Dual Zone System> (page 43).  
“Subwoofer”  
Turns on/off the subwoofer output.  
“ON”/ “OFF”  
“Detailed Setup”  
“Car Type”  
“Speaker Setting”  
“Car Type Adjust”  
“X'Over”  
To get clear sound, set the sound environment  
according to the location and size of physically  
installed speakers with reference to the  
followings:  
• Dual Zone System  
Main source and sub source output Front channel and  
Rear channel separately.  
“Volume Offset”  
Sets each source’s volume as a difference from  
the basic volume.  
“–8” — “0” (AUX: “-8”— “+8”)  
|
40 KIV-BT900/ KIV-700  
 
Preset Equalizer Curve Select  
Manual Equalizer Control  
You can select following Equalizer curve.  
You can adjust following Equalizer Control items.  
Display  
“Natural”  
“User”  
“Rock”  
“Pops”  
“Easy”  
“Top40”  
“Jazz”  
“Game”  
“iPod”  
Equalizer curve  
Natural  
User*  
Rock  
Pops  
Easy  
Top 40  
Jazz  
Band  
Item  
Range  
“BAND1”(62.5 Hz) “GAIN”Band level  
“EFCT”Bass Effect  
“BAND2”(250 Hz) “GAIN”Band level  
“BAND3”(1 kHz)  
“BAND4”(4 kHz)  
“BAND5”(16 kHz) “GAIN”Band level  
-9 –+9 dB  
“ON”/OFF”  
-9 –+9 dB  
-9 –+9 dB  
-9 –+9 dB  
-9 –+9 dB  
“GAIN”Band level  
“GAIN”Band level  
1
2
Enter Audio Control mode  
Press the [Volume] knob.  
Game  
iPod (During iPod source only)  
Enter Manual Equalizer Control mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
* The Equalizer curve set in the section <Manual Equalizer  
Control> is recalled.  
1
2
Enter Audio Control mode  
Press the [Volume] knob.  
Select “Equalizer” > “Manual Equalizer.  
3
4
5
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Enter Preset Equalizer mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Equalizer” > “Preset Equalizer.  
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
3
Select the Equalizer curve  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select the iPod Equalizer curve  
You can select from 22 Equalizer curve types for  
iPod when “iPod” is selected.  
1. Enter iPod Equalizer mode  
Press the [Volume] knob.  
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
When “iPod” is selected in the section <Preset Equalizer  
Curve Select> (page 41), Manual Equalizer Control is  
disabled.  
2. Select the iPod Equalizer curve  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
You can select for each source.  
4
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
You can select for each source.  
English  
|
41  
   
Audio Adjustments  
Listening Position Selection  
Listening Position Fine Adjustments  
The sound environment can be compensated in  
accordance with the selected position. According to  
the listening position, select the position from the  
following settings.  
Making fine adjustment of the value specified at  
Preset position selection per speaker.  
1
Enter Audio Control mode  
Press the [Volume] knob.  
Compensation seat  
Not compensating.  
Front-Left seat  
Front-Right seat  
Front seat  
Display  
“ALL”  
“FL”  
“FR”  
“F ALL”  
2
Enter Manual position setting mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Position” > “DTA.  
3
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
1
2
Enter Audio Control mode  
Press the [Volume] knob.  
Enter Preset position setting mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Item  
Setting overview  
Front Left speaker  
Front Right speaker  
Rear Left speaker  
Rear Right speaker  
Subwoofer Left  
“Front”/“L”  
“Front”/“R”  
“Rear”/“L”  
“Rear”/“R”  
“SW”/“L”  
“SW”/“R”  
“INITIAL”  
Select “Position” > “Preset Position.  
3
4
Select the seat you want to compensate  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
Subwoofer Right  
Initialize the setting values.  
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
4
5
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
Adjust between 0 and 5.58 feet.  
Press the [Volume] knob for at least 1 second if you  
want to execute the “INITIAL”.  
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
|
42 KIV-BT900/ KIV-700  
   
The source set as a sub source cannot be operated  
during the dual zone mode. Cancel the mode and then  
operate the source.  
Dual Zone System  
The separate sources can be selected for Front  
channel and Rear channel.  
Display  
Overview  
“2Zone Rear Volume”*1 Adjust the volume of Rear channel.  
“0” — “35”  
“Detailed Setup”  
“2Zone Select”  
The Dual Zone System is enabled by selecting  
a sub source.  
“OFF”/ “USB” (“iPod”/ “Zune”)/ “INT MEM”/  
“AUX”  
“2Zone Front/Rear”*1 Specifies the destination of sub source sound  
when the Dual Zone function is turned on.  
“Rear”/ “Front”  
(
: Factory setting)  
*1 The Dual Zone System is enabled.  
1
Select the source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select a source other than “STANDBY.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
2
3
Enter Audio Control mode  
Press the [Volume] knob.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Detailed Setup.  
4
5
6
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
Select Main source by [SRC] button.  
Adjust the volume of Front channel by [Volume] knob.  
The Audio Control has no effect on sub source.  
“USB, iPod” and “Int.Mem.” (Internal memory) cannot be  
set at the same time for the main and sub sources.  
There are following limitations when Dual Zone System  
is enabled.  
- There is no output from the subwoofer.  
- “Fader, Subwoofer Levelof <Audio Control> (page 40)  
and DSP function are not available.  
The Bluetooth audio source can be set exclusively to the  
front speaker. Set “2Zone Front/Rear” to “Rear.  
English  
|
43  
 
DSP Setup  
Speaker Setting  
SRC MENU Volume  
The speaker X’Over is automatically set when the  
position and size of each speaker are selected from  
the following items.  
Speaker  
“FRONT”  
Item  
“Location” Speaker Location Front  
“Door, On Dash, Under Dash”  
Speaker Size Front  
Range  
“Size”  
“O.E.M., 4inch, 5inch, 6 1/2inch,  
“6 3/4inch, 7inch, 4x6, 5x7, 6x8,  
“6x9, 7x10”  
Car Type Selection  
You can compensate the delay of the sound arrival  
time by selecting your environment from the  
following car types.  
“Tweeter” Speaker Size Tweeter  
“None, Use”  
“Location” Speaker Location Rear  
• “Door, Rear Deck”  
“REAR”  
Display  
Overview  
• “2nd Row, 3rd Row” (Car Type:  
“Minivan, Minivan (Long)”)  
Speaker Size Rear  
“None, O.E.M., 4inch, 5inch, 6  
1/2inch, 6 3/4inch, 7inch, 4x6,  
“5x7, 6x8, 6x9, 7x10”  
Speaker Size Subwoofer  
“Off”  
Not compensating.  
Compact car  
Full size car  
Station wagon  
Minivan  
Sport-utility vehicle  
Long Minivan  
“Compact”  
“FullSize Car”  
“Wagon”  
“Minivan”  
“SUV”  
“Size”  
“Size”  
“SUB W”  
“None, 6 1/2inch, 8inch, 10inch,  
“12inch, 15inch Over”  
“Minivan (Long)”  
1
2
Enter Audio Control mode  
Press the [Volume] knob.  
1
2
Enter Audio Control mode  
Press the [Volume] knob.  
Enter Car Type select mode  
Turn the [Volume] knob and press it when the  
Enter Speaker setting mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Detailed Setup” > “Speaker Setting.  
desired item is displayed.  
Select “Detailed Setup” > “Car Type.  
3
4
Select the car type  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
3
4
5
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
You can compensate the distances in more details by  
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
|
44 KIV-BT900/ KIV-700  
   
5
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
Car Type Fine Adjustments  
Adjusting fine tuning of the speaker position  
compensation value specified at <Car Type  
Display  
“Front”  
“Rear”  
“SW”  
Item  
Range  
Front speaker  
Rear speaker  
Subwoofer  
0 – 14.44 feet  
0 – 14.44 feet  
0 – 14.44 feet  
1
2
Enter Audio Control mode  
Press the [Volume] knob.  
Enter Car Type Adjustment mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Detailed Setup” > “Car Type Adjust.  
3
4
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
The settings of the delay time are automatically  
identified and compensated by specifying the  
distances of each speaker from the center of the  
vehicle interior.  
1 Set the front and rear positions and the height  
of the reference point to the position of the ears  
of the person sitting in the front seat, and set  
the right and left positions to the center of the  
vehicle interior.  
2 Measure the distances from the reference point  
to the speakers.  
3 Calculate the distance difference in accordance  
with the farthest speaker.  
Reference point  
+3.2 feet  
FRONT  
FRONT  
REAR  
1.7 feet  
2.6 feet  
REAR  
4.9 feet  
+2.3 feet  
+0 feet  
SUB-W  
English  
|
45  
 
DSP Setup  
X’Over Setting  
Audio Preset Memory  
Fine adjusting the following setting values  
corresponding to the X’Over values set in the  
Registering the value setup by Sound Control.  
1
Setup Sound Control  
Refer to the following operations to setup the  
Sound Control.  
Display  
Item  
Range  
“X’Over”  
“Front”  
“FC”  
Front High Pass Filter  
Through, 30, 40, 50, 60, 70, 80, 90,  
100, 120, 150, 180, 220, 250 (Hz)  
“SLOPE” Front High Pass Slope  
-6, -12, -18, -24 dB/Oct  
Rear High Pass Filter  
Through, 30, 40, 50, 60, 70, 80, 90,  
100, 120, 150, 180, 220, 250 (Hz)  
“Rear”  
“FC”  
2
Enter Audio preset memory mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Detailed Setup” > “Preset” > “Preset  
Memory.  
“SLOPE” Rear High Pass Slope  
-6, -12, -18, -24 dB/Oct  
Subwoofer Low Pass Filter  
30, 40, 50, 60, 70, 80, 90, 100, 120,  
150, 180, 220, 250, Through (Hz)  
“Subwoofer” “FC”  
“SLOPE” Subwoofer Slope  
-6, -12, -18, -24 dB/Oct  
“PHASE” Subwoofer Phase  
Reverse (180°)/ Normal (0°)  
3
4
Select the number to put in the memory  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select a preset number.  
1
2
Enter Audio Control mode  
Press the [Volume] knob.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “YES.  
Enter X’Over setting mode  
Turn the [Volume] knob and press it when the  
“Completed” is displayed.  
desired item is displayed.  
Select “Detailed Setup” > “X’Over.  
5
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
3
Select the speaker you want to set  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Register 6 patterns of Audio Preset Memory.  
Preset number “1”:  
Select “Front, Rear, or “Subwoofer.  
When you press the Reset, all the sources will be the  
setting value which is registered.  
Preset number “1” and “2”:  
The memory cannot be erased by the Reset button.  
This function cannot be registered when the iPod  
4
5
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
6
7
Repeat steps 3 to 5 to complete the X’Over  
settings  
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
|
46 KIV-BT900/ KIV-700  
   
Audio Preset Recall  
Recalling the sound setup registered by <Audio  
1
Select the source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
2
Enter Audio preset recall mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Detailed Setup” > “Preset” > “Preset  
Recall.  
3
4
Select the number to recall in the memory  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select the preset number.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “YES.  
“Completed” is displayed.  
5
Exit Audio Control mode  
Press the [MENU] button for at least 1 second.  
changed to the value which was recalled.  
The Equalizer curve is changed to the value which was  
recalled by the selected source.  
English  
|
47  
 
Favorite Control  
If the contents in iPod are changed after the FAVORITE  
registration, the list registered in this unit becomes  
different from that in iPod. In this case, perform the  
FAVORITE registration again.  
FAV  
SRC MENU Volume  
Favorite Preset Recall  
Retrieving an item registered to Favorite.  
1
Enter Favorite Preset Recall mode  
Press the [FAV] button.  
Favorite Preset Memory  
2
Select the number to recall in the Favorite  
memory  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select the preset number.  
Registering the operation procedure to select your  
favorite broadcast station or iPod Playlists/ Artists,  
etc.  
1
Display a favorite item  
Source  
Registerable items  
Cancelling the Favorite Preset Recall mode  
TUNER/SIRIUS/XM/HD Frequency or channel  
Press the [FAV] button.  
iPod  
Browse item such as Playlists/ Artists/  
Albums, etc.  
Menu list Setting  
Audio control  
Hands-free phone  
Menu list Setting item  
Audio control item  
Telephone number retrieval.  
When iPod is selected for the source, the list selection  
screen for Playlists/ Artists/ Albums, etc. is displayed.  
Songs will not be automatically played.  
” is displayed when the operation procedure  
FAV  
When connecting an iPod via USB hub, Favorite preset  
can be recalled only during the playback of the iPod.  
can be registered.  
iPod setting  
The desired list in the first hierarchy can be  
registered.  
1st hierarchy  
2nd hierarchy  
3rd hierarchy  
iPod  
PLAYLISTS  
ALL ARTISTS  
ARTISTS 1  
ARTISTS 2  
ARTISTS 3  
ARTISTS  
ALBUMS  
ALL ALBUMS  
ALBUM 1  
ALBUM 2  
COMPOSERS  
AUDIOBOOKS  
ALBUM 3  
2
3
4
Enter Favorite Preset Memory mode  
Press the [FAV] button for at least 1 second.  
Select the number to put in the memory  
Turn the [Volume] knob.  
Put the Favorite Preset in the memory  
Press the [Volume] knob.  
Cancelling the Favorite Preset Memory mode  
Press the [FAV] button.  
Registering the operation procedure to an existing  
preset number overwrites the existing procedure.  
Register 6 of Favorite Preset Memory.  
The memory cannot be erased by the Reset button.  
|
48 KIV-BT900/ KIV-700  
Favorite Preset Memory Delete  
Deleting an item registered to Favorite.  
1
Select the Standby  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “STANDBY” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
2
3
Enter Menu List mode  
Press the [MENU] button.  
Enter Favorite Preset Memory Delete mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Initial Settings” > “Favorite Delete.  
4
5
Select the number you want to delete  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select the preset number.  
Select “ALLif you want to delete all.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “YES.  
“Completed” is displayed.  
Exit Favorite Preset Memory Delete mode.  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
English  
|
49  
 
Function of KIV-BT900  
KIV-700 with KCA-BT300/BT200 (Optional Accessory)  
Bluetooth Setup  
“Bluetooth HF”/ You can specify output speakers for hands-free  
“Bluetooth HF/ voice communication and Bluetooth audio  
SRC MENU  
Volume  
Audio”*1  
sound.  
“Front”: Outputs voice from the front speakers.  
“All”: Outputs voice from the front and rear  
speakers.  
“Call Beep”  
You can output a beep from the speaker when  
a call comes in.  
“ON”: Beep is heard.  
“OFF”: Beep is canceled.  
“BT F/W Update” Display the version of the firmware of this unit.  
Bluetooth Setting  
“Mic Gain”*2  
Adjust the sensitivity of the microphone for a  
telephone call. Adjust the voice of caller. Setting  
to“+”increases the voice volume.  
“–3” – “0” – “+3”  
You can select following Bluetooth Setting items.  
1
Enter Bluetooth mode  
“Noise  
Reduce the noises generated by surrounding  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
Reduction”*2 environment without changing the microphone  
volume. Adjust the voice of caller when it is  
not clear. Setting to“+”increases the noise  
reduction.  
2
3
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “BT Settings.  
“–3” – “0” – “+3”  
“Echo Cancel  
Level”*2  
Adjust the level of echo cancellation. Setting to  
“+”increases the echo cancel reduction.  
“–2” – “0” – “+2”  
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
(
: Factory setting)  
*1 Function of KIV-700 with KCA-BT300/BT200 (Optional  
Accessory)  
Display  
Overview  
*2 Function of KIV-BT900/ KIV-700 with KCA-BT300  
(Optional Accessory)  
“SMS Inbox”  
Display the received short message.  
“BT Settings”  
4
5
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
“Phone Selection” Select a cell-phone or Bluetooth audio player  
“Audio Selection”*1  
connection.  
Exit BT Setting mode  
Press the [MENU] button for at least 1 second.  
“SMS Download” Download a short message.  
“Voice Tag”  
Remarks  
Registers voice for voice recognition and voice  
to select the Phone number category in Phone  
book.  
• “Auto Answer” (Setting the Time Interval for Automatic  
Answer)  
This function automatically answers (responds to) a call  
after lapse of the preset time interval for automatic answer.  
“OFF” : Does not answer the phone call automatically.  
“0” : Automatically answers the phone call at once.  
“1s” – “99s” : Automatically answers the phone call after  
lapse of 1 – 99 seconds.  
“Detailed Setup” Move to detailed item.  
“Device  
Register a Bluetooth device (pairing).  
Registration”  
“Special Device  
Select”  
If the time set in the cell-phone is shorter than that set in  
the unit, the former will be used.  
“Device Delete” Cancel registration of the Bluetooth device.  
“PIN Code Edit” Specify the PIN code required when registering  
this unit using the Bluetooth device.  
“Auto Answer” Answer a call automatically after lapse of the  
preset time interval for automatic answer.  
“OFF”/ “0s” – “8s” – “99s”  
This function does not work for call waiting.  
• “BT F/W Update” (Displaying the Firmware Version)  
Display the version of the firmware of this unit.  
For how to update the firmware, access our web site.  
|
50 KIV-BT900/ KIV-700  
 
Registering Special Bluetooth device  
Allow registration of a special device that cannot be  
registered normally (pairing).  
1. Select Special device registration mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Registering Bluetooth Device  
To make your Bluetooth device (cell-phone) usable  
with this unit, you need to register it (pairing). You  
can register up to 5 Bluetooth devices to this unit.  
Registering from this unit  
Select “BT Settings” > “Detailed Setup” > “Special  
Device Select.  
A list is displayed.  
1
Enter Bluetooth mode  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
2. Select a device name  
Turn the [Volume] knob and push the center  
when the desired device name is displayed.  
If “Completed” is displayed, registration is  
completed.  
3. Go through the procedure step 3 of  
the registration (pairing).  
2
Enter Bluetooth device registration mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “BT Settings” > “Detailed Setup” >  
“Device Registration.  
Search for the Bluetooth device.  
When search is completed, “Finished” is displayed.  
Cancelling Special device registration mode  
Press the [MENU] button for at least 1 second.  
3
4
5
Select a Bluetooth device  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
If the device name is not in the list, select “Other Phones.  
“Pairing” is displayed (KCA-BT300 only)  
If “Pairing Success” is displayed, proceed to step 7.  
If “PIN Code NG” is displayed, proceed to steps 5.  
Input the PIN code  
1. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select the digit.  
2. Turn the [Volume] knob to select the  
numbers, and then press the [Volume] knob.  
6
Transmit the PIN code  
Press the [Volume] knob for at least 1 second.  
If “Pairing Success” is displayed, registration is  
completed.  
If the error message appears even though the  
PIN code is correct, try <Registering Special  
7
8
Return to the device list  
Press the [Volume] knob.  
Exit BT Setting mode  
Press the [MENU] button for at least 1 second.  
This unit allows up to eight digits to be input for a PIN  
code. If a PIN code cannot be input from this unit, it can  
be input from the Bluetooth device.  
If there are 5 or more Bluetooth devices registered, you  
cannot register a new Bluetooth device.  
English  
|
51  
     
Function of KIV-BT900  
KIV-700 with KCA-BT300/BT200 (Optional Accessory)  
Bluetooth Setup  
Registering PIN Code  
Selecting the Bluetooth Device You  
Wish to Connect  
By operating the Bluetooth device, specify the PIN  
code necessary for registering this unit.  
When two or more Bluetooth devices have already  
been registered, you need to select the Bluetooth  
device you wish to use.  
1
Enter Bluetooth mode  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
1
Enter Bluetooth mode  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
2
Enter PIN code edit mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “BT Settings” > “Detailed Setup” > “PIN  
Code Edit.  
2
Select Bluetooth device selection mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
The current setting of PIN code is displayed.  
Cell-phone  
3
Input the PIN code  
Select “BT Settings” > “Phone Selection.  
1. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select the digit.  
2. Turn the [Volume] knob to select the  
numbers, and then press the [Volume] knob.  
Audio player (KIV-700 only)  
Select “BT Settings” > “Audio Selection.  
“(name)” is displayed.  
3
4
Select the Bluetooth device  
Turn the [Volume] knob.  
4
5
Register a PIN code  
Press the [Volume] knob for at least 1 second.  
If “Completed” is displayed, registration is  
completed.  
Set up the Bluetooth device  
Press the [Volume] knob.  
(name)” or “ (name)” is displayed.  
” (blue): The selected Bluetooth device is busy.  
” (gray): The selected Bluetooth device is on  
standby.  
Exit BT Setting mode  
Press the [MENU] button for at least 1 second.  
“ “ (blank): The Bluetooth device is deselected.  
By default, “0000” is specified.  
A PIN code can be specified with up to eight digits.  
5
Exit BT Setting mode  
Press the [MENU] button for at least 1 second.  
If a Bluetooth device is already selected, deselect it, and  
then select a different one.  
If you cannot select a device using the audio player,  
connect the device with the audio player.  
|
52 KIV-BT900/ KIV-700  
   
Deleting a Registered Bluetooth  
Device  
Downloading the Phone Book  
Download the phone book data from the cell-  
phone to this unit so that you can use the Phone  
Book of this unit.  
You can delete a registered Bluetooth device.  
1
Enter Bluetooth mode  
To download automatically  
If the cell-phone supports a phone book  
synchronization function, the phone book is  
downloaded automatically after Bluetooth  
connection.  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
2
Enter Bluetooth device deletion mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Setting on the cell-phone may be required.  
If no phone book data is found in the unit even after  
the compete display, your cell-phone may not support  
automatic download of phone book data. In this case, try  
downloading manually.  
Select “BT Settings” > “Detailed Setup” >  
“Device Delete.  
“(name)” is displayed.  
3
Select the Bluetooth device  
Turn the [Volume] knob.  
To download from the cell-phone manually  
4
5
Delete the selected Bluetooth device  
Press the [Volume] knob.  
1
By operating the cell-phone, end the hands-free  
connection.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “YES.  
2
By operating the cell-phone, send the phone  
book data to this unit  
By operating the cell-phone, download the phone  
“Delete” is displayed.  
book data to this unit.  
6
Exit BT Setting mode  
Press the [MENU] button for at least 1 second.  
• During downloading:  
“Downloading” is displayed.  
• After completion of downloading:  
“Completed” is displayed.  
When a registered cell-phone is deleted, its Phone Book,  
log, SMS, and voice tag are also deleted.  
3
By operating the cell-phone, start the hands-  
free connection.  
To clear the downloading completion message  
Press any button.  
Up to 1000 phone numbers can be registered for each  
registered cell-phone.  
Up to 25 (KIV-BT900)/ 32 (KIV-700) digits can be  
registered for each phone number along with up to 50*  
characters representing a name.  
(* 50: Number of alphabetical characters. Fewer  
characters can be input depending on the type of  
characters.)  
To cancel downloading of the phone book data, operate  
the cell-phone.  
English  
|
53  
 
Function of KIV-BT900  
KIV-700 with KCA-BT300/BT200 (Optional Accessory)  
Bluetooth Setup  
Select “Phonebook Name Check” (Play)  
Adding a Voice Dialing Command  
5
Press the [Volume] knob.  
Play the registered voice and return to step 3.  
Add a voice tag to the phone book for voice dialing.  
You can register up to 35 voice tags.  
Select “Phonebook Name Delete” (Delete)  
1
Enter Bluetooth mode  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
5
6
Delete a voice tag  
Press the [Volume] knob.  
Turn the [Volume] knob to select “YES, and  
then press the [Volume] knob.  
2
Enter Phone book name edit mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “BT Settings” > “Voice Tag” >  
“Phonebook Name Edit.  
Exit BT Setting mode  
Press the [MENU] button for at least 1 second.  
Audio sound is not output during voice tag registration.  
3
4
Search for the name to register  
Select the name to register with reference to 4 in  
If a voice tag has already been registered for a  
name, “*” is displayed before the name.  
Select a mode  
Turn the [Volume] knob.  
Display  
Operation  
“Phonebook Name Registration” Register a voice tag.  
“Phonebook Name Check”*  
“Phonebook Name Delete”*  
Play a voice tag.  
Delete a voice tag.  
* Displayed only when a name for which a voice tag has  
been registered is selected.  
Select “Phonebook Name Registration”  
(Registration)  
5
Register a voice tag (first)  
“Enter Voice 1” is displayed.  
When a beep is heard, say a voice tag within 2  
seconds.  
6
Confirm the voice tag (second)  
“Enter Voice 2” is displayed.  
When a beep is heard, say the same voice tag as  
that you said in step 6 within 2 seconds.  
“Completed” is displayed.  
7
End registration  
Press the [Volume] knob.  
Return to step 3. You can register another voice tag  
continuously.  
If your voice cannot be recognized, a message is  
displayed. Pressing the [Volume] knob allows you to retry  
voice input. Refer to <Troubleshooting Guide> (page 80).  
|
54 KIV-BT900/ KIV-700  
 
Setting a Voice Command for  
Category  
Add a voice tag to the phone number category  
(type) for voice calling.  
1
Enter Bluetooth mode  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
2
Enter Phone Number type edit mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “BT Settings” > “Voice Tag” >  
“Phonebook Type Edit.  
3
4
Select the category (type) you wish to set  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “General, Home, Office, Mobile, or  
“Other.  
Select a mode  
Turn the [Volume] knob.  
Display  
Operation  
“Phonebook Type Registration” Register a voice tag.  
“Phonebook Type Check”*  
“Phonebook Type Delete”*  
Play a voice tag.  
Delete a voice tag.  
* Displayed only when a name for which a voice tag has  
been registered is selected. Function of KIV-700 with  
KCA-BT300/BT200 (Optional Accessory)  
5
6
Register the category (type) by performing  
Exit BT Setting mode  
Press the [MENU] button for at least 1 second.  
Set the voice tag for all the 5 categories. If the voice tag  
is not registered for all the categories, the Phone book  
may not be recalled by voice command.  
English  
|
55  
 
Function of KIV-BT900  
KIV-700 with KCA-BT300/BT200 (Optional Accessory)  
SMS (Short Message Service)  
Display the SMS  
SRC MENU  
Volume  
DISP  
The SMS arrived at the cell-phone is displayed on  
the receiver.  
A newly arrived message is displayed.  
¤
To prevent car accidents, the driver should not read the  
SMS while driving.  
/ PLAY MODE  
When a new message arrives  
“SMS RECEIVED” is displayed.  
The display disappears with any operations.  
Downloading the SMS  
Download the short message (SMS) arrived at the  
cell-phone so that it can be read on this unit.  
Displaying the SMS  
1
2
Enter Bluetooth mode  
1
2
3
Enter Bluetooth mode  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
KIV-BT900: Press the [ ] button.  
KIV-700: Press the [PLAY MODE] button for at  
least 1 second.  
Enter SMS Inbox mode  
Enter SMS download mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “BT Settings” > “SMS Download.  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “SMS Inbox.  
A message list appears.  
Start downloading  
3
4
Select a message  
Turn the [Volume] knob.  
Each pressing of the [DISP] button switches  
between telephone number or name and message  
reception date.  
Press the [Volume] knob.  
“SMS Downloading” is displayed.  
When the downloading finishes, “Completed” is  
displayed.  
4
Exit BT Setting mode  
Press the [MENU] button for at least 1 second.  
Display the text  
Press the [Volume] knob.  
Turning the [Volume] knob scrolls the message.  
Pressing the [Volume] knob again returns to the  
message list screen.  
The cell-phone must be able to transmit the SMS using  
Bluetooth. Setting on the cell-phone may be required.  
If the cell-phone does not support SMS function, the  
SMS download item in Function Control mode is not  
displayed.  
5
6
Exit SMS Inbox mode  
Press the [MENU] button.  
When the SMS is downloaded from the cell-phone, the  
unopened messages in the cell-phone are opened.  
The already-read and unread short messages can be  
respectively downloaded up to 75.  
Exit BT Setting mode  
Press the [MENU] button for at least 1 second.  
The unopened message is displayed at the beginning  
of the list. Other messages are displayed in the order of  
reception.  
The SMS that has arrived when the cell-phone is not  
linked with Bluetooth cannot be displayed. Download  
the SMS.  
The short message cannot be displayed during  
downloading the SMS.  
|
56 KIV-BT900/ KIV-700  
   
English  
|
57  
Satellite Radio Tuner Control (Optional)  
Satellite Radio Setting  
SRC MENU  
Volume  
You can select following Satellite Radio Setting  
items.  
1
2
Select Satellite Radio source  
Enter Menu List mode  
Press the [MENU] button.  
4
¢
3
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Settings.  
Basic Operation  
4
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Selecting Satellite Radio source  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “SIRIUS, or “XM Radio” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
Display  
Selectable setting/item  
“Settings”  
“Seek Mode” Selects the tuning mode of the radio.  
“Channel”: Normal manual seeking control.  
“Preset”: Search in order of the channels in the  
Preset memory  
You need to register to the service provider to receive  
the service by Satellite Radio. Consult the service  
provider if “CALL … TO SUBSCRIBE” appears.  
The radio may take a little time to start receiving after  
you select the Satellite Radio source.  
“ESN”  
Displays the Electronic Serial Number of satellite  
radio.  
“ESN=”  
(
: Factory setting)  
If the signal reception fails, “Acquiring Signal”/ “No Signal”  
appears.  
5
6
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
Selecting the channel  
Press the [4] or [¢] button.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
Selecting the Preset Band  
1. Enter Menu List mode  
Press the [MENU] button.  
2. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select “SR1, SR2, SR3” or “SR4. (SIRIUS)  
Select “XM1, XM2, XM3” or “XM4. (XM)  
Category and Channel Search  
Selecting the channel and category you want to  
receive.  
Switching display  
Press the [DISP] button to select display mode.  
Selects the Information or Clock.  
1
2
Select Satellite Radio source  
Enter Menu List mode  
Press the [MENU] button.  
Display example of information display mode  
3
Enter Category and Channel Search mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
1
Select “Channel Search.  
4
5
Select the Category  
Turn the [Volume] knob to select Category, and  
then press the [Volume] knob.  
1 Station information (see <Customization of  
Select the Channel  
Turn the [Volume] knob to select Channel, and  
then press the [Volume] knob.  
|
58 KIV-BT900/ KIV-700  
     
Cancelling Category and Channel Search mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
Channel Scan  
Every receivable Channel is checked for 10 seconds.  
1
2
Select Satellite Radio source  
You cannot Channel search until the category  
information is acquired.  
Enter Menu List mode  
Press the [MENU] button.  
3
Start Channel Scan  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Channel Scan.  
Preset Memory  
Putting the channel in the memory.  
1
2
3
Select the channel you wish to store in the  
preset memory  
4
Release it when the channel you want to listen  
to is received  
Press the [Volume] knob.  
Enter Menu List mode  
Press the [MENU] button.  
Function of remote control  
Enter Preset Memory mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Direct Access Tuning  
Entering the channel and tuning.  
Select “List & Memory.  
1
2
Select Satellite Radio source  
4
Select the number to put in the memory  
Turn the [Volume] knob and press it for at least  
2 seconds when the desired item is displayed.  
Select the preset number.  
Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote  
control.  
3
4
Enter the channel  
Press the number buttons.  
Only the channel number is stored. Category information  
is not stored.  
Tune in to the entered channel  
Press the [4] or [¢] button.  
Preset Tuning  
Cancelling Direct Access Tuning  
Press the [DIRECT] button on the remote  
control.  
Recalling the channels in the memory.  
1
2
Select Satellite Radio source  
Enter Menu List mode  
Press the [MENU] button.  
If you make no button operation for 10 seconds, the  
Direct Access Tuning mode is automatically canceled.  
If you cannot receive any signal in the input Channel due  
to bad conditions on radio wave or other such problems,  
“Acquiring Signal”/ “No Signal” appears.  
3
Select a desired station in the memory  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “List & Memory” > Preset number.  
English  
|
59  
       
HD Radio™ Tuner Control (Optional)  
Station Preset Memory  
SRC MENU  
SEARCH MODE  
Volume  
Putting a station in the memory.  
1
Select the radio band and tune in a desired  
radio station you wish to store in the preset  
memory  
2
3
Enter Menu List mode  
Press the [MENU] button.  
4
¢
Enter Preset Memory mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Basic Operation  
Selecting HD Radio source  
Select “List & Memory.  
Press the [SRC] button. Turn the [Volume] knob  
and press it when the desired item is displayed.  
Select the “HD RADIO” display.  
SRC Select mode 2: Pressing the [SRC] button  
repeatedly also switches source.  
4
Select the number to put in the memory  
Turn the [Volume] knob and press it for at least  
2 seconds when the desired item is displayed.  
Select the preset number.  
Selecting the Receiving Band  
1. Enter Menu List mode  
Auto Memory Entry  
Press the [MENU] button.  
Putting stations with good reception in the memory  
automatically.  
2. Turn the [Volume] knob and press it when  
the desired item is displayed.  
Select “FM1, FM2, FM3” or “AM.  
1
2
3
Select the radio band you wish to store in the  
preset memory  
Selecting the Receiving station  
Press the [4] or [¢] button.  
During reception of stereo stations the “ST”  
indicator lights up.  
Details of the station selecting in operation are  
set in the “Seek Mode” of <HD Radio™ Setting>  
Enter Menu List mode  
Press the [MENU] button.  
Enter Auto Memory Entry mode  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Settings” > “Auto Memory.  
Switching display  
Press the [DISP] button to select display mode.  
Selects the Information or Clock.  
4
Open Auto Memory Entry  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “YES.  
Display example of information display mode  
When 6 stations that can be received are put in the  
memory, auto memory entry closes.  
1
2
1 Station information (see <Customization of  
2 Status indicator (see <Display Indicator items>  
|
60 KIV-BT900/ KIV-700  
     
Preset Tuning  
HD Radio™ Setting  
Recalling the stations in the memory.  
You can select following HD Radio Setting items.  
1
2
Select the radio band  
1
2
Select the HD Radio source  
Enter Menu List mode  
Press the [MENU] button.  
Enter Menu List mode  
Press the [MENU] button.  
3
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “Settings.  
3
Select a desired station in the memory  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Select “List & Memory” > Preset number.  
4
Select the setting item to adjust  
Turn the [Volume] knob and press it when the  
desired item is displayed.  
Display  
Overview  
“Settings”  
“Seek Mode”  
Selects the tuning mode of the radio.  
“Auto1”: Automatic search for a station.  
“Auto2”: Search in order of the stations in the  
Preset memory.  
“Manual”: Normal manual tuning control.  
“Auto Memory” Memorizes 6 stations with good reception  
automatically.  
“YES”/ “NO”  
“Receive Mode” Sets the receive mode of the HD Radio receiver.  
“Auto”: Automatically tunes to analog broadcast  
when there is no digital broadcast.  
“Digital”: Digital broadcasts only.  
“Analog”: Analog broadcasts only.  
“TAG Memory”*1 Displays the tag memory usage of HD Radio  
receiver. Up to 50 tags can be registered to  
this unit.  
“##/50”  
“Tagging”*1  
Turns ON / OFF the tag memory function of HD  
Radio receiver.  
“ON”/ “OFF”  
(
: Factory setting)  
*1 Only with KTC-HR300 (optional accessory) connected  
5
6
Make a setting  
Turn the [Volume] knob to select a setting  
value, and then press the [Volume] knob.  
Exit Menu List mode  
Press the [MENU] button for at least 1 second,  
and then press it again briefly.  
English  
|
61  
   
HD Radio™ Tuner Control (Optional)  
Function of remote control  
Function of KTC-HR300 (optional accessory)  
Direct Access Tuning  
iTunes Tagging  
Tuning in a desired radio station by entering the  
frequency.  
Using an iTunes Tagging enabled HD Radio receiver  
you can tag your music. When you hear a song you  
enjoy on your local HD Radio station, you only have  
to press the [SEARCH MODE] button. The song’s  
information will then be saved on this unit. The  
saved songs will then show up in a playlist called  
Tagged” in iTunes the every next time you sync  
your iPod to your computer. So then you just need  
to click and then easily buy and download the song  
you were tagging directly from the Apple iTunes  
Music Store.  
1
2
Select the radio band  
Enter Direct Access Tuning mode  
Press the [DIRECT] button.  
“– – – –” is displayed.  
3
Select Tuning item  
Press the [DIRECT] button.  
Pressing the [DIRECT] button each time switches  
the tuning items as follows.  
1
Enter iTunes tagging mode  
Press the [SEARCH MODE] button.  
Items  
Frequency  
Channel  
Cancelling Direct Access Tuning  
Display  
“– – – –”  
“HD –”  
” will be displayed when song information  
TAG  
can be registered.  
4
5
Enter the frequency or Channel  
Press the number buttons.  
Example of frequency input:  
Turn “ON” the “TAGGING” of <HD Radio™ Setting> (page  
61) when using this function.  
Up to 50 TAGs (song’s information) can be registered to  
this unit. When iPod is connected, the TAG information  
registered to this unit is transferred to the connected  
iPod.  
Desired frequency  
92.1 MHz (FM)  
810 kHz (AM)  
Press button  
[9], [2], [1]  
[8], [1], [0]  
The memory usage can be checked by selecting “TAG  
Tune in to the entered frequency  
Press the [4] or [¢] button.  
Cancelling Direct Access Tuning  
Press the [DIRECT] button on the remote  
control.  
You can enter the FM band frequency in steps of a  
minimum of 0.1 MHz.  
|
62 KIV-BT900/ KIV-700  
 
English  
|
63  
Basic Operations of Remote Control  
In Tuner/HD Radio source  
• Band select: [FM+]/[AM–]  
• Station select: [4]/[¢]  
• Recall preset stations: [1] — [6]  
VOL  
SRC  
ATT  
ENT/ 38  
In USB/ Internal Memory source  
5/∞  
• Music select: [4]/[¢]  
• Folder select: [FM+]/[AM–]  
• Pause/Play: [38]  
AUD  
EXIT  
AM–  
FM+  
• Movement between Menulist mode: [5]/[]  
• Return to previous folder: [  
]
0 — 9  
In iPod source  
DIRECT  
(page17,23,23,26,32,59,62)  
• Movement between Menulist mode:  
[5]/[]  
• Return to previous item: [  
• Music select: [4]/[¢]  
• Pause/Play: [38]  
]
General control  
• Volume control: [VOL]  
• Source select: [SRC]  
• Volume reduce: [ATT]  
When the button is pressed again, the volume  
returns to the previous level.  
In Satellite Radio tuner source  
• Preset band select: [FM]  
• Channel select: [4]/[¢]  
• Recall preset channels: [1] — [6]  
• Return to previous item: [  
• Exit from mode: [EXIT]  
• Selection of item: [5]/[]  
• Determination: [ENT]  
]
• Enter Audio Control mode: [AUD]  
|
64 KIV-BT900/ KIV-700  
Hands-free phone control  
Preparing the remote control unit  
Making a call  
Pull the battery sheet out from the remote control  
unit to the direction of the arrow.  
• Enter the dialing method selection mode: [  
• Select a dialing method: [ENT]  
• Number dial input:  
]
Input a digit: [0] – [9]  
Input “+”: [¢]  
Input “#”: [FM+]  
Input “*”: [AM]  
Clear the entered phone number: [4]  
• Make a call: [DIRECT]  
Changing the battery of the remote control  
unit  
Receiving a call  
Use a commercially available  
button battery (CR2025).  
Insert the battery with the +  
and – poles aligned properly,  
following the illustration  
inside the case.  
Push on slide  
• Answer the call: [  
]
• Switch between the private talk mode and the  
hands-free talk mode: [ENT]  
CR2025  
(+side)  
Pull out  
Call waiting  
• Answer Another Incoming Call with the Current  
Call Suspended: [  
]
• Answer another Incoming Call after Terminating  
the Current Call: [SRC]  
• Continue the Current Call: [1]  
During a call  
• End the call: [SRC]  
¤ CAUTION  
• Do not set the remote control in hot places such  
as on the dashboard.  
• Lithium battery.  
Danger of explosion if the battery is incorrectly  
replaced.  
Replace only with the same or equivalent type.  
• The battery pack or batteries shall not be exposed  
to excessive heat such sunshine, fire or the like.  
• Keep battery out of reach of children and in  
original package until ready to use. Dispose of  
used batteries promptly. If swallowed contact  
physician immediately.  
English  
|
65  
Appendix  
About Audio file  
About Picture files  
Playable Audio file  
AAC-LC (.m4a)  
Acceptable picture files  
JPEG (.jpg)  
BMP (.bmp)  
MP3 (.mp3)  
WMA (.wma)  
Linear PCM (WAV) (.wav)  
Acceptable media  
Mass-storage-class USB device  
Playable USB device  
USB mass storage class  
Playable USB device file system  
FAT16, FAT32  
Acceptable USB device file system, file and folder  
names and playing order are the same as those for  
audio files. See <About Audio files>.  
Although the audio files are complied with the  
standards listed above, the play maybe impossible  
depending on the types or conditions of media or  
device.  
iPod/iPhone that can be connected to this  
unit  
Made for  
• iPod nano (1st generation) • iPod nano (2nd generation)  
• iPod nano (3rd generation) • iPod nano (4th generation)  
• iPod nano (5th generation) • iPod with video  
Playing order of the Audio file  
In the example of folder/file tree shown below, the  
files are played in the order from to .  
• iPod classic  
• iPod touch (1st generation)  
^
¡
:
:
Audio file  
Folder  
Root  
(1)  
• iPod touch (2nd generation)  
Works with  
¡!  
2
• iPhone  
• iPhone 3G  
• iPhone 3GS  
3
¡"  
¡#  
4
¡$  
5
¡%  
¡P  
• Update iPod/iPhone software to the latest version.  
An online manual about audio files is put on the site,  
manual, detailed information and notes which are not  
written in this manual are provided. Make sure to read  
through the online manual as well.  
• Type of control available varies depending on the  
type of connected iPod. See www.kenwood.com/  
cs/ce/ipod/ for further details.  
• The word “iPod” appearing in this manual indicates  
the iPod or the iPhone connected with the iPod  
connection cable. (Not supported model KCA-iP500)  
Refer to the web site for connectable iPod and iPod  
connection cable.  
In this manual, the word “USB device” is used for flash  
memories and digital audio players which have USB  
terminals.  
• If you start playback after connecting the iPod, the  
music that has been played by the iPod is played  
first.  
About Video files  
Acceptable video files  
H.264/MPEG-4 AVC (.mp4, .avi : Baseline Profile)  
MPEG-4 (.mp4, .avi : Simple Profile)  
WMV 9 (.wmv)  
In this case, “RESUMING” is displayed without  
displaying a folder name, etc. Changing the browse  
item will display a correct title, etc.  
• You cannot operate iPod if “KENWOOD” or “”  
displayed on iPod.  
Picture size  
QVGA 320 x 240  
Acceptable media  
Mass-storage-class USB device, iPod  
Acceptable USB device file system, file and folder  
names and playing order are the same as those for  
audio files. See <About Audio files>.  
|
66 KIV-BT900/ KIV-700  
 
About USB device  
About the Cell-Phone  
This unit conforms to the following Bluetooth  
specifications:  
• When the USB device is connected to this unit,  
it can be charged up provided that this unit is  
powered.  
KIV-BT900  
• Install the USB device in the place where it will not  
prevent you from driving your vehicle properly.  
• You can use the USB hub with up to 3 ports. The  
USB hub with 4 and more ports can also be used,  
but available ports are up to 3 of them.  
• Do not connect more than 2 USB hubs to this unit.  
This unit cannot recognize the USB hubs if more  
than 2 USB hubs are connected.  
Version  
Profile  
Bluetooth Standard Ver. 2.0  
HFP (Hands Free Profile)  
OPP (Object Push Profile)  
PBAP (Phone Book Access Profile)  
SYNC (Synchronization Profile)  
KIV-700  
You need to register your cell-phone to your  
Bluetooth Unit beforehand. Make sure to read the  
instruction manual of the Bluetooth Unit as well.  
For the cell-phones verified for compatibility, access  
the following URL:  
• Only one iPod can be connected to a USB hub.  
• Connect the Multi Card Reader directly to this unit.  
if connected to an USB hub, proper operation of the  
unit is not guaranteed.  
• Take backups of the audio files used with this unit.  
The files can be erased depending on the operating  
conditions of the USB device.  
We shall have no compensation for any damage  
arising out of erasure of the stored data.  
• No USB device comes with this unit. You need to  
purchase a commercially available USB device.  
• When connecting the USB device, usage of the  
CA-U1EX (option) is recommended.  
• Normal playback is not guaranteed when a cable  
other than the USB compatible cable is used.  
Connecting a cable whose total length is longer  
than 4 m can result in abnormal playback.  
The units supporting the Bluetooth function have been  
certified for conformity with the Bluetooth Standard  
following the procedure prescribed by Bluetooth  
SIG. However, it may be impossible for such units to  
communicate with your cell-phone depending on its type.  
HFP is a profile used to make a hands-free call.  
OPP is a profile used to transfer data such as a phone book  
between units.  
About Satellite Radio tuner (Optional)  
This unit supports Satellite Radio tuners which are  
released by SIRIUS and XM.  
Refer to the instruction manual of Satellite radio tuner.  
About “KENWOOD Music Editor”  
• This unit supports the PC application “KENWOOD  
Music Editor Lite ver1.0” or later.  
• When you use the audio file with database  
information added by the “KENWOOD Music Editor  
Lite ver1.0, you can search a file by title, album or  
artist name using the <File Search> (page 15).  
• In the Instruction manual, the term “Music Editor  
media” is used to mean the device that contains  
audio files with database information added with  
KENWOOD Music Editor.  
About HD Radio Reception (Optional)  
When you connect an HD Radio tuner, Tuner features  
of the unit are disabled and changed to HD Radio  
tuner features. With the HD Radio tuner, you can use  
the similar functions of Tuner features.  
• “KENWOOD Music Editor Lite ver1.0” is available from  
the following web site:  
• For further information on “KENWOOD Music Editor  
Lite ver1.0, refer to the site above or the application  
help.  
English  
|
67  
   
Appendix  
Function items appearing when the iPod source  
is selected  
Menu List  
Common function items  
Display  
“Settings”  
Display  
Page  
Page  
“Music”  
“Playlists”  
“Artists”  
“Albums”  
“Songs”  
“Podcasts”  
“Genres”  
“Clock & Date”  
“Clock Adjust”  
“Time Synchronized”  
“Summer Time”  
“Sub Clock Adjust”  
“Date Adjust”  
“Composers”  
“Audiobooks”  
“Date Mode”  
“Display & Illumination”  
“Display Select”  
“Type Select”  
“Videos”  
“Video Playlists”  
“Movies”  
“Music Videos”  
“TV Shows”  
“Video Podcasts”  
“Rentals”  
“Side Select”  
“Text Select”  
“Graphic Select”  
“Display Off Mode”  
“Display Dimmer”  
“Text Scroll”  
“Key Color Select”  
“Key ILLUMI Dimmer”  
“ILLUMI Effect”  
“ILLUMI Music SYNC”  
“Aspect Set”  
“Play Mode”  
“iPod By Hand Mode”  
“Folder Random”  
“All Random”  
“File Repeat”  
“Port Up”  
“Settings”  
“Skip Search”  
“Monitor Setup”  
“RDS Setting”  
“TI”  
“DEMO Mode”  
“Device F/W Version”  
“Delete My Playlist”  
“Audiobook Speed”  
“Sound Check“  
Function items appearing during standby  
Display  
“Settings”  
“Clock & Date”  
“Display & Illumination”  
“Initial Settings”  
“Source Select”  
“Beep”  
“Clock & Date”  
“Display & Illumination”  
“RDS Setting”  
Page  
“Menu Language Select”  
“Built in AUX”  
“Favorite Delete”  
“Built in AMP”  
“AV Out Set”  
“System F/W Update”  
|
68 KIV-BT900/ KIV-700  
 
Function items appearing when the USB source  
is selected  
Function items appearing when the Zune  
source is selected  
Display  
Display  
Page  
Page  
“USB List”  
“Music”  
“Copy from USB”  
“Play Mode”  
“File Scan”  
“Genres”  
“Artists”  
“Albums”  
“Folder Random”  
“Songs”  
“All Random”  
“File Repeat”  
“Folder Repeat”  
“Playlists”  
“Play Mode”  
“File Scan”  
“Port Up”  
“Drive Select”  
“Slide”  
“Save as Wallpaper”  
“Settings”  
“Folder Random”  
“File Repeat”  
“Port Up”  
“Settings”  
“Skip Search”  
“Device F/W Version”  
“Clock & Date”  
“Display & Illumination”  
“RDS Setting”  
“Device F/W Version”  
“Device F/W Update”  
“Clock & Date”  
“Display & Illumination”  
“RDS Setting”  
Function items appearing when the Internal  
memory source is selected  
Function items appearing when the Music  
Editor media source is selected  
Display  
“Music”  
Display  
“Internal Memory List”  
“Play Mode”  
Page  
Page  
“Playlists”  
“File Scan”  
“Artists”  
“Albums”  
“Songs”  
“Genres”  
“Folder Random”  
“All Random”  
“File Repeat”  
“Folder Repeat”  
“Settings”  
“Copy from USB”  
“Play Mode”  
“Internal Memory Delete”  
“File Scan”  
“Folder Random”  
“File Repeat”  
“Internal Memory Format”  
“Clock & Date”  
“Display & Illumination”  
“RDS Setting”  
“Port Up”  
“Drive Select”  
“Settings”  
“Skip Search”  
“Device F/W Version”  
“Device F/W Update”  
“Clock & Date”  
“Display & Illumination”  
“RDS Setting”  
Next page 3  
English  
|
69  
Appendix  
Function items appearing when the Disc  
changer source is selected  
Display  
Function items appearing when the Hands-Free  
source is selected  
Page  
Display  
Page  
“Play Mode”  
“Preset Call”  
“Phonebook”  
“In Call”  
“Track Scan”  
“Disc Random”  
“Magazine Random”  
“Track Repeat”  
“Disc Repeat”  
“Out Call”  
“Missed Call”  
“SMS Inbox”  
“Number Dial”  
“BT Settings”  
“Settings”  
“Clock & Date”  
“Display & Illumination”  
“RDS Setting”  
“Phone Selection”  
“Audio Selection”  
“SMS Download”  
“Voice Tag”  
Function items appearing when the Tuner  
source is selected  
Display  
“List & Memory”  
“FM1”  
“FM2”  
“Detailed Setup”  
Page  
“Device Registration”  
“Special Device Select”  
“Device Delete”  
“PIN Code Edit”  
“Auto Answer”  
“Bluetooth HF”/  
“Bluetooth HF/Audio”  
“Call Beep”  
“FM3”  
“AM”  
“PTY Search”  
“Settings”  
“Seek Mode”  
“Auto Memory”  
“TI”  
“TAG Memory”  
“Tagging”  
“BT F/W Update”  
“Mic Gain”  
“Noise Reduction”  
“Echo Cancel Level”  
Function items appearing when the Bluetooth  
Audio source is selected  
“Forced MONO”  
“Clock & Date”  
“Display & Illumination”  
Display  
Page  
“Settings”  
Function items appearing when an AUX source  
is selected  
“Audio Selection”  
“Detailed Setup”  
“Device Registration”  
Display  
“Settings”  
Page  
“Special Device Select”  
“Device Delete”  
“PIN Code Edit”  
“Name Set”  
“Clock & Date”  
“Display & Illumination”  
“RDS Setting”  
“BT F/W Update”  
“Clock & Date”  
“Display & Illumination”  
“RDS Setting”  
|
70 KIV-BT900/ KIV-700  
Function items appearing when the Satellite  
Radio tuner source is selected  
Display Indicator items  
Source Display Overview  
Display  
Page  
General “ATT”  
Indicates that the attenuator is active.  
“List & Memory”  
“SR1”/“XM1”  
“SR2”/“XM2”  
“SR3”/“XM3”  
“SR4”/“XM4”  
“Channel Search”  
“Channel Scan”  
“Settings”  
“FAV”  
iPod/ USB “MP3”  
“WMA”  
Indicates that the Favorite can be registered.  
Identifies the MP3 file.  
Identifies the WMA file.  
Identifies the AAC-LC file.  
Identifies the WAVE file.  
Identifies the MPEG4 file.  
Identifies the H.264 file.  
Identifies the WMV file.  
Indicates that the Scan function is ON.  
“AAC”  
“WAV”  
“MPG4”  
“H.264”  
“WMV”  
“SCAN”  
“Seek Mode”  
“ESN”  
“Clock & Date”  
“Display & Illumination”  
“RDS Setting”  
“Fo•RDM” Indicates that the Folder Random function is ON.  
“ALL•RDM” Indicates that the All Random function is ON.  
“Fo•REP” Indicates that the Folder Repeat function is ON.  
“Fi•REP” Indicates that the File Repeat function is ON.  
“SCAN”  
“RDM”  
CD  
Changer  
Indicates that the Scan function is ON.  
Indicates that the Track Random function is ON.  
Function items appearing when the HD Radio™  
tuner source is selected  
“M•RDM” Indicates that the Magazine Random function is ON.  
“D•REP”  
“T•REP”  
“REP”  
“ST”  
Indicates that the Disc Repeat function is ON.  
Indicates that the Track Repeat function is ON.  
Indicates that the Repeat function is ON.  
Indicates that stereo broadcast is being received.  
Indicates the reception state of traffic information. (On: TP  
is being received. Blinking: TP is not being received.)  
Indicates that Tagging is enabled.  
Display  
“List & Memory”  
“FM1”  
Page  
Tuner  
"TI"  
“FM2”  
“FM3”  
“AM”  
“TAG”  
HD Radio "HD A"  
"HD D"  
Indicates that analog broadcast is being received.  
Indicates that digital broadcast is being received.  
Indicates whether the reception channel is main or sub.  
(On: The channel is main. Blinking: The channel is sub.)  
Indicates that Multi channel is being received.  
Indicates that stereo broadcast is being received.  
Indicates that Tagging is enabled.  
“Settings”  
“Seek Mode”  
“Auto Memory”  
“Receive Mode:”  
“TAG Memory”  
“Tagging”  
"M/S"  
"MC"  
"ST"  
“TAG”  
Hands- “BT”  
Free  
Bluetooth cell-phone connection status.  
Battery level of cell-phone.  
“Clock & Date”  
“Display & Illumination”  
Full  
>
>
>
Nearly dead  
Indicates that the battery level of cell-phone cannot be  
obtained.  
Signal strength of cell-phone.  
Maximum  
>
>
>
Minimum  
Indicates the out of coverage zone.  
Indicates that the signal strength of cell-phone cannot  
be obtained.  
“CALL WAIT” Indicates call-waiting.  
“PRIVATE” Indicates that cell-phone is busy in the private mode.  
English  
|
71  
 
Appendix  
Time zone list  
Continent  
City  
Time Difference  
–6:00  
Kansas City  
Kathmandu  
Kingston  
Krasnoyarsk  
Kuala Lumpur  
Kuwait  
Kyiv  
Las Vegas  
Lima  
London  
Los Angeles  
Madrid  
Magadan  
Manila  
Mexico City  
Midway Is.  
Minsk  
Continent  
City  
Time Difference  
–10:00  
–9:00  
–8:00  
–7:00  
–7:00  
–6:00  
–5:00  
–5:00  
–4:00  
–2:00  
+1:00  
+4:00  
+9:30  
+2:00  
+1:00  
–9:00  
+2:00  
+2:00  
–5:00  
+12:00  
+3:00  
+4:00  
+7:00  
+8:00  
+2:00  
+1:00  
–5:00  
–3:00  
+1:00  
+2:00  
+1:00  
–3:00  
+2:00  
–1:00  
–4:30  
–6:00  
+1:00  
–7:00  
–5:00  
+6:00  
+5:00  
+2:00  
+2:00  
+8:00  
+5:00  
+2:00  
+7:00  
+2:00  
+2:00  
+4:30  
+5:45  
–5:00  
+7:00  
+8:00  
+3:00  
+2:00  
–8:00  
–5:00  
+0:00  
–8:00  
+1:00  
+11:00  
+8:00  
–6:00  
–11:00  
+2:00  
+3:00  
+3:00  
+11:00  
+5:30  
–6:00  
–5:00  
–3:30  
+6:00  
+13:00  
+1:00  
–5:00  
–5:00  
+1:00  
+1:00  
+1:00  
–8:00  
–4:00  
+1:00  
–8:00  
+8:00  
+3:00  
+1:00  
+10:00  
+8:00  
+3:30  
+9:00  
–5:00  
+1:00  
–8:00  
+1:00  
+1:00  
+6:30  
+1:00  
+1:00  
Area  
Hawaii  
Alaska  
Pacific Time  
Arizona  
Mountain Time  
Central Time  
Eastern time  
Indiana  
Atlantic Time  
Mid-Atlantic  
W.Central Africa  
Abu Dhabi  
Adelaide  
Amman  
City  
Amsterdam  
Anchorage  
Ankara  
Athens  
Atlanta  
Auckland  
Baghdad  
Baku  
Bangkok  
Beijing  
Moscow  
Nairobi  
New Caledonia  
New Delhi  
New Orleans  
New York  
Newfoundland  
Novosibirsk  
Nuku’alofa  
Oslo  
Ottawa  
Panama  
Paris  
Prague  
Rome  
San Francisco  
Santiago  
Sarajevo  
Seattle  
Singapore  
St. Petersburg  
Stockholm  
Sydney  
Taipei  
Tehran  
Tokyo  
Toronto  
Beirut  
Berlin  
Bogotá  
Brasilia  
Brussels  
Bucharest  
Budapest  
Buenos Aires  
Cairo  
Cape Verde Is.  
Caracas  
Chicago  
Copenhagen  
Denver  
Detroit  
Dhaka  
Ekaterinburg  
Harare  
Helsinki  
Tunis  
Vancouver  
Vienna  
Warsaw  
Yangon  
Zagreb  
Hong Kong  
Islamabad  
Istanbul  
Jakarta  
Jerusalem  
Johannesburg  
Kabul  
Zurich  
(GMT)  
|
72 KIV-BT900/ KIV-700  
 
English  
|
73  
Appendix  
FCC WARNING  
IC (Industry Canada) Notice  
This equipment may generate or use radio  
frequency energy. Changes or modifications to this  
equipment may cause harmful interference unless  
the modifications are expressly approved in the  
instruction manual. The user could lose the authority  
to operate this equipment if an unauthorized change  
or modification is made.  
Operation is subject to the following two conditions:  
(1) This device may not cause interference, and  
(2) this device must accept any interference, including  
interference that may cause undesired operation  
of the device.  
The term “IC: ” before the certification/registration  
number only signifies that the Industry Canada  
technical specification were met.  
FCC NOTE  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment may cause harmful interference to radio  
communications, if it is not installed and used in  
accordance with the instructions. However, there  
is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment  
off and on, the user is encouraged to try to correct  
the interference by one or more of the following  
measures:  
This product contains a CR Coin Cell Lithium Battery  
which contains Perchlorate Material – special handling  
may apply.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment  
and receiver.  
• Connect the equipment into an outlet on a  
circuit different from that to which the receiver is  
connected.  
HD Radio™ and the HD Radio Ready logo are  
proprietary trademarks of iBiquity Digital Corporation.  
“Adobe Reader” is a trademark of Adobe Systems  
Incorporated.  
• Consult the dealer or an experienced radio/TV  
technician for help.  
The “AAC” logo is a trademark of Dolby Laboratories.  
The Bluetooth word mark and logos are owned by  
the Bluetooth SIG, Inc. and any use of such marks  
by Kenwood Corporation is under license. Other  
trademarks and trade names are those of their  
respective owners.  
Contains Transmitter Module  
FCC ID : RKXCK5000NVIA  
Contains Transmitter Module  
IC ID: 5119A-CK5000NVIA  
Microsoft, Zune™ and the Zune™ logo are trademarks  
of the Microsoft group of companies.  
iTunes is a trademark of Apple Inc.  
iPod is a trademark of Apple Inc., registered in the U.S.  
and other countries.  
iPhone is a trademark of Apple Inc.  
“Made for iPod” means that an electronic accessory  
has been designed to connect specifically to iPod and  
has been certified by the developer to meet Apple  
performance standards.  
“Works with iPhone” means that an electronic  
accessory has been designed to connect specifically  
to iPhone and has been certified by the developer to  
meet Apple performance standards.  
Apple is not responsible for the operation of this  
device or its compliance with safety and regulatory  
standards.  
|
74 KIV-BT900/ KIV-700  
Accessories/ Installation Procedure  
chassis of the vehicle and the protection function may  
have been activated. Therefore, the speaker wire should be  
checked.  
Accessories  
1
2
3
4
5
If your car’s ignition does not have an ACC position, connect  
the ignition wires to a power source that can be turned on  
and off with the ignition key. If you connect the ignition  
wire to a power source with a constant voltage supply, as  
with battery wires, the battery may die.  
If the fuse blows, first make sure the wires aren’t touching  
to cause a short circuit, then replace the old fuse with one  
with the same rating.  
Insulate unconnected wires with vinyl tape or other similar  
material. To prevent a short circuit, do not remove the caps  
on the ends of the unconnected wires or the terminals.  
Connect the speaker wires correctly to the terminals to  
which they correspond. The unit may be damaged or fail to  
work if you share the - wires or ground them to any metal  
part in the car.  
When only two speakers are being connected to the  
system, connect the connectors either to both the front  
output terminals or to both the rear output terminals (do  
not mix front and rear). For example, if you connect the +  
connector of the left speaker to a front output terminal, do  
not connect the - connector to a rear output terminal.  
After the unit is installed, check whether the brake lamps,  
blinkers, wipers, etc. on the car are working properly.  
Reception may drop if there are metal objects near the  
Bluetooth antenna.  
..........1  
..........2  
..........4  
..........4  
6
7*  
2 m ..........1  
2.5 m ..........1  
3 m ..........1  
* KIV-BT900 only  
Installation Procedure  
1
To prevent a short circuit, remove the key from the  
ignition and disconnect the - battery.  
Make the proper input and output wire  
connections for each unit.  
Connect the speaker wires of the wiring harness.  
2
3
4
Connect the wiring harness wires in the following  
order: ground, battery, ignition.  
5
6
7
8
Connect the wiring harness connector to the unit.  
Install the unit in your car.  
Reconnect the - battery.  
While pressing the [Volume] knob and the [MENU]  
button, press the [SRC] button for at least 3  
Bluetooth antenna unit  
About CD players/disc changers connected  
to this unit  
If the CD player/ disc changer has the “O-N” switch, set  
it to the “N” position.  
The functions you can use and the information that  
can be displayed may differ depending on the models  
being connected.  
2WARNING  
If you connect the ignition wire (red) and the battery wire  
(yellow) to the car chassis (ground), you may cause a short  
circuit, that in turn may start a fire. Always connect those  
wires to the power source running through the fuse box.  
For Good Reception  
To assure good reception, note the following:  
• Communicate with the cell-phone within the line-  
of-sight distance of 10 m (30 ft). The communication  
range becomes shorter depending on the  
surrounding environment. The communication  
range also becomes shorter when there is an  
obstacle between this unit and the cell-phone. The  
above maximum communication range (10 m) is  
not always assured.  
¤
Mounting and wiring this product requires skills and  
experience. For safety’s sake, leave the mounting and wiring  
work to professionals.  
Make sure to ground the unit to a negative 12V DC power  
supply.  
Do not install the unit in a spot exposed to direct sunlight  
or excessive heat or humidity. Also avoid places with too  
much dust or the possibility of water splashing.  
Do not use your own screws. Use only the screws provided.  
If you use the wrong screws, you could damage the unit.  
If the power is not turned ON (“Protect” is displayed), the  
speaker wire may have a short-circuit or touched the  
• A broadcast station or walkie-talkie located nearby  
can interfere with communication due to too strong  
signal.  
English  
|
75  
Connecting Wires to Terminals  
For the sake of safety, be sure to connect  
the parking sensor.  
Do not remove the cap when you do not use  
USB device  
(commercially  
available)  
the USB cable. The connector will cause the  
unit to malfunction if it gets in touch with any  
metallic part of the vehicle.  
Connect to the vehicle’s parking  
brake detection switch harness.  
Parking sensor wire (Light Green)  
iPod  
(commercially  
available)  
Parking sensor wire Junction cable  
(Light Green) (Accessory 3)  
USB connector (1m)  
iPod audio output (Left: White, Right: Red)  
iPod visual output (Yellow)  
R
L
iPod  
AUDIO OUT  
Rear output  
iPod  
VIDEO OUT  
Front output  
iPod cable  
(Accessory 4)  
Sub Woofer output  
Microphone input  
(KIV-BT900 only)  
Microphone  
(Accessory 7)  
(KIV-BT900 only)  
Antenna Cord  
FM/AM antenna input (JASO)  
AUX input (Stereo)  
R
L
Fuse (10A)  
Use the mini-plug (3.5 mm ø) which  
is stereo type and does not have any  
resistance.  
Wiring harness (Accessory 1)  
To Kenwood disc changer/External optional  
accessory  
White  
White/Black  
To front left speaker  
To connect these leads, refer to the  
relevant instruction manuals.  
Gray  
Gray/Black  
To front right speaker  
To rear left speaker  
To rear right speaker  
Green  
Green/Black  
Purple  
If no connections are made, do not  
let the wire come out from the tab.  
Purple/Black  
Power control/Motor antenna control wire  
(Blue/White)  
When using the optional power amplifier, connect to its power control  
terminal.  
P.CONT  
Motor antenna control wire (Blue)  
Depending on what antenna you are using, connect either to the control  
terminal of the motor antenna, or to the power terminal for the booster  
amplifier of the film-type or short pole type antenna.  
ANT.  
CONT  
Mute control wire (Brown)  
To connect the Kenwood navigation system, consult your navigation  
manual.  
MUTE  
Connect to the terminal that is grounded when either the telephone  
Steering remote control wire  
(Light Blue/Yellow)  
rings or during conversation. (KIV-700 only)  
To use the steering wheel remote control feature, you need to an exclusive  
remote adapter (not supplied) matches your car is required.  
STEERING WHEEL  
REMOTECONT.  
REMOTEINPUT  
Dimmer control wire (Orange / White)  
To car light control switch  
Ignition key switch  
ACC  
ILLUMI  
Ignition wire (Red)  
Car fuse box  
(Main fuse)  
Battery wire (Yellow)  
Car fuse box  
Battery  
Ground wire (Black) · (To car chassis)  
|
76 KIV-BT900/ KIV-700  
 
Installation/Removing the Unit  
Non-Japanese Cars  
Removing the Hard Rubber Frame  
1
Engage the catch pins on the removal tool and  
remove the two locks on the upper level.  
Lift up and pull the frame forward as shown in the  
figure.  
Lock  
Catch  
Bend the tabs of the mounting  
sleeve with a screwdriver or similar  
utensil and attach it in place.  
Accessory2  
Removal tool  
Make sure that the unit is installed securely in place. If the  
unit is unstable, it may malfunction (for example, the sound  
may skip).  
2
When the upper level is removed, remove the  
lower two locations.  
The frame can be removed from the bottom side in the  
same manner.  
Japanese Cars  
1
Refer to the section <Removing the Hard Rubber  
Frame> and then remove the hard rubber frame.  
Removing the Unit  
2
Align the holes in the unit (two locations on each  
side) with the vehicle mounting bracket and secure  
the unit with the accessory screws.  
1
2
3
Refer to the section <Removing the Hard Rubber  
Frame> and then remove the hard rubber frame.  
Insert the two removal tools deeply into the slots  
on each side, as shown.  
Lower the removal tool toward the bottom, and  
pull out the unit halfway while pressing towards  
the inside.  
T
N
T/N  
T
N
T: Toyota cars  
N: Nissan cars  
Accessory 2  
8 mm  
MAX.  
8mm  
MAX.  
5
6
ø5mm  
ø5mm  
Accessory5...for Nissan car  
Accessory6...for Toyota car  
¤
Be careful to avoid injury from the catch pins on the  
removal tool.  
4
Pull the unit all the way out with your hands, being  
careful not to drop it.  
¤ CAUTION  
Install this unit in the console of your vehicle.  
Do not touch the metal part of this unit during and  
shortly after the use of the unit. Metal part such as  
the heat sink and enclosure become hot.  
English  
|
77  
Installation/Removing the Unit  
Accessory of KIV-BT900  
Installation the Microphone Unit  
1
Check the installation position of the microphone  
(accessory 7).  
2
Remove oil and other dirt from the installation  
surface.  
3
4
Install the microphone.  
Wire the microphone cable up to the hands-free  
box with it secured at several positions using tape  
or the like.  
Accessory 7  
Fix a cable with a commercial  
item of tape.  
Peel the release coated paper of double-face adhesive tape to  
fix on the place shown above.  
Adjust the direction of the microphone to the driver.  
Install the microphone as far as possible from the cell-  
phone.  
|
78 KIV-BT900/ KIV-700  
Troubleshooting Guide  
Some functions of this unit may be disabled by  
some settings made on this unit.  
What might seem to be a malfunction in your unit  
may just be the result of slight misoperation or  
miswiring. Before calling service, first check the  
following table for possible problems.  
!
• Cannot set up the subwoofer.  
• No output from the subwoofer.  
• Cannot set up the subwoofer position of Manual  
position setting.  
General  
? The Touch Sensor Tone does not sound.  
• The Dual zone function is enabled.  
• In the speaker select option, None is selected for  
the subwoofer.  
The preout jack is being used.  
The Touch Sensor Tone cannot be output from  
the preout jack.  
? The illumination flashes when the knob or button  
is operated.  
This is the key illumination effect.  
!
• Cannot set up the equalizer.  
• Cannot set up the Bass Boost.  
• Cannot set up the Highway sound.  
• Cannot set up the Supreme.  
• Cannot set up the Position control.  
• The Dual zone function is enabled.  
You set this effect in “ILLUMI Effect” of <Display  
? The key illumination effect brought about in  
conjunction with the sound volume is small.  
The key illumination effect may be insufficient  
depending on the sound volume and sound quality.  
• The DSP function is disabled.  
“DSP Set” of <Audio Control> (page 40)  
• In the speaker select option, None is selected for  
the rear speakers.  
Tuner source  
? Radio reception is poor.  
The car antenna is not extended.  
Pull the antenna out all the way.  
!
• Cannot select the output destination of the  
subsource in the Dual zone.  
Audio file source  
• Cannot adjust the volume of the rear speakers.  
? The sound skips when an Audio file is being  
The Dual zone function is disabled.  
played.  
The recording condition is bad.  
Record the media again or use another media.  
!
!
• Cannot set up Display.  
turned off.  
• Cannot switch to USB/iPod or Internal Memory  
source.  
• The Dual zone function is set to USB/iPod or  
Internal Memory.  
• AV output function is set to ON.  
“AV Out Set” of <Initial Settings> (page 38)  
!
The number of songs contained in “Songs”  
category of this unit is different from that  
contained in “Songs” category of iPod.  
Podcast files are not counted in this unit as this unit  
does not support the playback of podcast files.  
English  
|
79  
Troubleshooting Guide  
Hands-free  
The messages shown below display your  
systems condition.  
? The hands-free talk volume is low.  
The hands-free talk volume is set at a low level.  
TOC Error:  
• No disc has been loaded in the disc  
magazine.  
The hands-free talk volume can be adjusted  
independently. Adjust it during hands-free talk.  
“Mic Gain” and “Noise Reduction” <Bluetooth  
• The CD is quite dirty. The CD is upside-  
down. The CD is scratched a lot.  
Error 05:  
Error 77:  
The disc is unreadable.  
? No sound is heard from the rear speakers.  
You are talking in the hand-free talk mode.  
The unit is malfunctioning for some reason.  
Press the reset button on the unit. If the  
“Error 77” code does not disappear, consult  
your nearest service center.  
No sound is heard from the rear speakers in the  
hands-free talk mode.  
? No beep is heard at reception of an incoming call.  
Error 99:  
Something is wrong with the disc magazine.  
Or the unit is malfunctioning for some reason.  
Check the disc magazine. And then press  
the reset button on the unit. If the “Error  
99” code does not disappear, consult your  
nearest service center.  
No beep is heard depending on the type of your  
cell-phone.  
TheCall Beepof <Bluetooth Setting> (page 50) is  
set ON.  
? Voice is not recognized.  
The vehicle window is open.  
Protect (Blink):  
If the surrounding noise is large, voice cannot be  
recognized properly. Close the vehicle windows  
to reduce noise.  
The speaker wire has a short-circuit or  
touches the chassis of the vehicle, and then  
the protection function is activated.  
Wire or insulate the speaker cable properly  
and press the reset button. If the “Protect”  
code does not disappear, consult your  
nearest service center.  
Small voice.  
If voice is too small, it cannot be recognized  
properly. Speak into the microphone a little more  
loudly and naturally.  
The person uttering the voice tag is not the one who  
registered the it.  
Unsupported File:  
An Audio file is played with a format that this  
Only the voice of the person who registered the  
voice tag can be recognized.  
unit can’t support.  
Copy Protection:  
A copy-protected file is played.  
Bluetooth audio source  
Read Error:  
The file system of the connected USB device  
is broken.  
Copy the files and folders for the USB  
device again. If the error message is still  
displayed, initialize the USB device or use  
other USB devices.  
? The Bluetooth audio player cannot be registered  
(pairing).  
The PIN code is fixed.  
When a PIN code is specified in the Instruction  
Manual for Bluetooth Audio Player, register it  
52) to register the Bluetooth audio player. If no PIN  
code is specified in the Instruction Manual, try  
“0000.  
No Device:  
N/A Device:  
The USB device is selected as a source  
although no USB device is connected.  
Change the source to any source other  
than USB. Connect an USB device, and  
change the source to USB again.  
? The sound from the Bluetooth audio player is  
discontinuous.  
The distance between this unit and audio player is  
too far.  
• An unsupported USB device is connected.  
• Connection to the iPod has failed.  
Check that the connected iPod is an iPod  
that is supported. See <iPod/iPhone that  
information on supported iPods.  
Move the audio player nearer to this unit.  
Another Bluetooth device is affecting the Bluetooth  
communication.  
Turn off another Bluetooth device.  
Move another Bluetooth device away from this  
unit.  
No Media File/Error 15:  
• The connected USB device contains no  
Another Bluetooth device or profile is used for  
communication.  
playable audio file.  
• Media was played that does not have data  
recorded that the unit can play.  
The downloading of the Phone book or the SMS  
disconnects the sound.  
|
80 KIV-BT900/ KIV-700  
 
USB ERROR:  
iPod Error:  
Some trouble may have occurred to the  
connected USB device.  
Remove the USB device, then cycle the  
power switch to ON. If the same display is  
repeated, use another USB device.  
No Entry:  
The cell-phone has not been registered  
(pairing).  
HF Disconnect: The unit cannot communicate with the cell-  
phone.  
HF Error 07:  
The memory cannot be accessed.  
Turn off the power and on again. If this  
message still appears, press the reset  
button on the control unit.  
Connection to the iPod has failed.  
Remove the USB device and then  
reconnect it.  
Confirm that the software for the iPod is  
the latest version.  
HF Error 68:  
The unit cannot communicate with the cell-  
phone.  
Turn off the power and on again. If this  
message still appears, press the reset  
button on the control unit.  
USB REMOVE (Blink):  
The Remove mode has been selected for the  
USB device/iPod. You can remove the USB  
device/iPod safely.  
Un Known:  
Device Full:  
The Bluetooth device cannot be detected.  
Over Capacity: Recording or copying was canceled because  
internal memory space ran out while copying  
from USB device.  
5 Bluetooth device have already been  
registered. No more Bluetooth device cannot  
be registered.  
Delete unnecessary files and record or  
copy once more.  
PIN Code NG: The PIN code is wrong.  
Connect NG: The unit cannot be connected to the device.  
Pairing Failed: Pairing error.  
Copy Error:  
• An incompatible digital audio player was  
used.  
• Cannot copy because the USB device is not  
firmly inserted.  
Err No Matching:  
Delete Error:  
The voice tag is wrong. Voice cannot be  
recognized because of an unregistered voice  
tag, etc.  
Format Error: Abnormal condition detected while deleting  
or formatting.  
Repeat the operation once more. This may  
take some time. If the message recurs,  
contact your nearest Kenwood dealer.  
Too Soft:  
Too Loud:  
Too Long:  
Voice is too small and cannot be recognized.  
Voice is too large to be recognized.  
Can’t Download:  
Download Error:  
The word or utterance is too long to be  
recognized.  
This unit does not work properly for some  
reason.  
No Phonebook: Data is not contained in the phone book.  
No Message: No short message in In Box.  
Press the reset button to download it  
again. If this error is still displayed, consult  
a local Kenwood dealer.  
Try all over again from the start. If this error  
is still displayed, consult a local Kenwood  
dealer.  
No Record:  
The voice tag is not registered in the phone  
book.  
Memory Full: The number of voice tags reaches the  
maximum number to be registered in the  
phone book.  
Writing Error: Writing failed while the file was downloaded.  
Try the downloading again.  
Memory Full: The TAG Memory of HD Radio or RDS is full.  
Favorite: No Memory:  
The procedure is not registered to Favorite  
Preset Memory  
iPod Full:  
The iPod Memory is full.  
No TAG Function:  
No Access:  
No Voice:  
The procedure preset with Favorite Control  
cannot be available. The preset content may  
not be recalled depending on the selected  
source or mode.  
iPod which does not support the TAG  
Memory is connected.  
N/A Channels: No receivable channel and category.  
No call.  
No Number:  
• The calling party does not notify a caller ID.  
• There is no phone number data.  
No Data:  
• There is no outgoing call list.  
• There is no incoming call list.  
• There is no missed call list.  
• There is no phone book list.  
English  
|
81  
Specifications  
FM tuner section  
USB Interface  
Frequency Range (200 kHz Space)  
: 87.9 MHz – 107.9 MHz  
USB Standard  
: USB 2.0 (Full speed)  
Usable sensitivity (S/N = 30dB)  
: 9.3dBf (0.8 μV/75 Ω)  
Maximum Supply current  
: 5V, 500 mA  
Quieting Sensitivity (S/N = 50dB)  
: 15.2dBf (1.6 μV/75 Ω)  
File System  
: FAT16/ 32  
Frequency response ( 3 dB)  
: 30 Hz – 15 kHz  
D/A Converter  
: 24 Bit  
Signal to Noise ratio (MONO)  
: 70 dB  
Frequency response ( 1 dB)  
: 10 Hz – 20 kHz  
Selectivity ( 400 kHz)  
: ≥ 80 dB  
Signal to Noise ratio (1 kHz)  
: 110 dB  
Stereo separation (1 kHz)  
: 40 dB  
Dynamic range  
: 93 dB  
Video decode  
: H.264/ MPEG4 AVC, MPEG 4, WMV  
Audio decode  
: MP3, WMA, AAC, WAV (Linear PCM)  
AM tuner section  
Frequency range (10 kHz space)  
: 530 kHz – 1700 kHz  
Usable sensitivity (S/N = 20dB)  
: 28 dBµ (25 µV)  
Monitor section  
Picture Size  
: 3 inches (diagonal) wide  
: 65.52 mm (W) x 36.84 mm (H)  
Display System  
: Transparent TN LCD panel  
Drive System  
: TFT active matrix system  
Number of Pixels  
: 76,800 (320H x 240V x RGB)  
Pixel Arrangement  
: RGB delta arrangement  
Back Lighting  
: LED  
Bluetooth section (KIV-BT900)  
Version  
: Bluetooth Ver. 2.0 Certified  
Frequency range  
: 2.402 – 2.480 GHz  
Output Power  
: +4dBm (MAX), 0dBm (AVE) Power Class 2  
Maximum Communication range  
: Line of sight approx.10m (32.8 ft)  
Profiles  
: HFP (Hands Free Profile)  
: HSP (Headset Profile)  
: SPP (Serial Port Profile)  
: PBAP (Phone Book Access Profile)  
: OPP (Object Push Profile)  
: SYNC (Synchronization Profile)  
|
82 KIV-BT900/ KIV-700  
Audio/ Video section  
Maximum output power  
: 50 W x 4  
Full Bandwidth Power (at less than 1% THD)  
: 22 W x 4  
Speaker Impedance  
: 4 – 8 Ω  
Tone action  
BAND1 (62.5 Hz): 9 dB  
BAND2 (250 Hz): 9 dB  
BAND3 (1 kHz): 9 dB  
BAND4 (4 kHz): 9 dB  
BAND5 (16 kHz): 9 dB  
Preout level / Load (CD/CD-CH)  
: 4000 mV/10 kΩ  
Preout impedance  
: ≤ 600 Ω  
iPod terminal  
Video output level : 1 Vp-p (75 Ω)  
Audio output level : 1.2 V (10 kΩ)  
Auxiliary input  
Frequency response ( 1 dB)  
: 20 Hz – 20 kHz  
Input Maximum Voltage  
: 1200 mV  
Input Impedance  
: 10 kΩ  
General  
Operating voltage  
KIV-BT900 (10.5 – 16V allowable) : 14.4 V  
KIV-700 (11 – 16V allowable) : 14.4 V  
Maximum Current consumption  
: 10 A  
Installation Size (W x H x D)  
: 182 x 53 x 158 mm  
7-3/16 x 2-1/16 x 6-1/4 inch  
Weight  
: 2.6 lbs (1.20 kg)  
Specifications subject to change without notice.  
Although the effective pixels for the liquid crystal panel is  
given as 99.99% or more, 0.01% of pixels may not light or  
may light incorrectly.  
English  
|
83  
This symbol mark indicates that  
Kenwood manufactured this product  
so as to decrease harmful influence on  
the environment.  

PYLE Audio PYLE Plus Series PLCD72MP User Manual
Olympus Camcorder FE 5050 User Manual
LG Electronics LG Lifes Good Car Stereo System SH32SD SZ User Manual
Kettler 08947 460 User Manual
Kenwood FP510 series User Manual
Kenwood DDX8036BT User Manual
Kenwood Car Stereo System KDC 2027SA User Manual
JVC KD SHX900 User Manual
JVC KD AR5500 User Manual
JVC KD A315 User Manual