Kenwood KDV MP7032 User Manual

KDV-MP7032  
DVD-RECEIVER  
INSTRUCTION MANUAL  
RECEPTOR DVD  
MANUAL DE INSTRUCCIONES  
RECEPTOR DVD  
MANUAL DE INSTRUÇÕES  
© B64-4223-08/03 LVT1909-001A (R)  
Before use  
2WARNING  
Cautions on the monitor  
• The monitor built in this unit has been produced  
with high precision, but it may have some  
ineffective dots. This is inevitable and is not  
malfunction.  
To prevent injury or fire, take the  
following precautions:  
• To prevent a short circuit, never put or leave any  
metallic objects (such as coins or metal tools) inside  
the unit.  
• Do not watch or fix your eyes on the unit’s display  
when you are driving for any extended period.  
• DO NOT operate the unit while driving. If you need  
to operate the unit while driving, be sure to look  
around carefully.  
• Do not expose the monitor to direct sunlight.  
• When the temperature is very cold or very hot.  
– Chemical changes occur inside, causing  
malfunction.  
– Pictures may not appear clearly or may move  
slowly. Pictures may not be synchronized with  
the sound or picture quality may decline in such  
environments.  
How to reset your unit  
• If the unit fails to operate properly, press the Reset  
button. The unit returns to factory settings when  
the Reset button is pressed.  
Cleaning the Unit  
If the faceplate of this unit is stained, wipe it with a  
dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain off  
with a cloth moistened with neutral cleaner, then  
wipe it again with a clean soft dry cloth.  
e Set  
ours/24Hours  
Clock  
¤
Applying spray cleaner directly to the unit may affect its  
mechanical parts. Wiping the faceplate with a hard cloth  
or using a volatile liquid such as thinner or alcohol may  
scratch the surface or erases characters.  
Reset button  
How to forcibly eject a disc  
Cleaning the Faceplate Terminals  
If the terminals on the unit or faceplate get dirty,  
wipe them with a clean soft dry cloth.  
NO EJECT?  
EMERGENCY EJECT?  
Lens Fogging  
NO EJECT?  
EMERGENCY EJECT?  
When you turn on the car heater in cold weather,  
dew or condensation may form on the lens in the  
disc player of the unit. Called lens fogging, this  
condensation on the lens may not allow discs to  
play. In such a situation, remove the disc and wait  
for the condensation to evaporate. If the unit still  
does not operate normally after a while, consult your  
Kenwood dealer.  
English | 3  
Notes  
About DivX  
• If you experience problems during installation,  
consult your Kenwood dealer.  
DivX is a popular media technology created by DivX,  
Inc. DivX media Files contain highly compressed  
video with high visual quality that maintains a  
relatively small file size. DivX files can also include  
advanced media features like menus, subtitles, and  
alternate audio tracks. Many DivX media files are  
available for download online, and you can create  
your own using your personal content and easy-to-  
use tools from DivX.com.  
• When you purchase optional accessories, check  
with your Kenwood dealer to make sure that they  
work with your model and in your area.  
• The illustrations of the display and the panel  
appearing in this manual are examples used to  
explain more clearly how the controls are used.  
Therefore, what appears on the display in the  
illustrations may differ from what appears on the  
display on the actual equipment, and some of the  
illustrations on the display may be inapplicable.  
About DivX Certified  
DivX Certified products are officially tested by the  
creators of DivX and guaranteed to play all versions  
of DivX video, including DivX 6. Certified products  
qualify for one of several DivX Profiles that designate  
the type of video the product supports, from  
compact portable video to high-definition video.  
• If you have parked the car for a long time in hot or  
cold weather, wait until the temperature in the car  
becomes normal before operating the unit.  
Handling discs  
• Do not touch the recording surface of the disc.  
This product incorporates copyright protection  
technology that is protected by U.S. patents and  
other intellectual property rights. Use of this  
copyright protection technology must be authorized  
by Macrovision, and is intended for home and  
other limited viewing uses only unless otherwise  
authorized by Macrovision. Reverse engineering or  
disassembly is prohibited.  
• Do not stick tape etc. on the disc, or use a disc with  
tape stuck on it.  
• Do not use disc type accessories.  
• Clean from the center of the disc and move  
outward.  
• When removing discs from this unit, pull them out  
horizontally.  
• If the disc center hole or outside rim has burrs,  
use the disc only after removing the burrs with a  
ballpoint pen etc.  
Manufactured under license under U.S. Patent #:  
5,451,942 & other U.S. and worldwide patents issued  
& pending. DTS and DTS Digital Out are registered  
trademarks and the DTS logos and Symbol are  
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All  
Rights Reserved.  
Discs that cannot be used  
• Discs that are not round cannot be used.  
is a trademark of DVD Format/Logo Licensing  
Corporation registered in the U.S., Japan and other  
countries.  
• Discs with coloring on the recording surface or  
discs that are dirty cannot be used.  
• This unit can only play the CDs with  
This unit may not correctly play discs which do not  
have the mark.  
• You cannot play a CD-R or CD-RW that has not  
been finalized. (For the finalization process refer to  
your CD-R/CD-RW writing software, and your CD-  
R/CD-RW recorder instruction manual.)  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
.
DivX, DivX Ultra Certified, and associated logos are  
trademarks of DivX, inc. and are used under license.  
Official DivX® Ultra Certified product  
Plays all versions of DivX® video (including DivX® 6)  
with enhanced playback of DivX® media files and the  
DivX® Media Format  
Microsoft and Windows Media are either registered  
trademarks or trademarks of Microsoft Corporation in  
the United States and/or other countries.  
4 | KDV-MP7032  
The marking of products using lasers  
(Except for some areas)  
CLASS 1  
LASER PRODUCT  
The label is attached to the chassis/case and says  
that the component uses laser beams that have been  
classified as Class 1. It means that the unit is utilizing  
laser beams that are of a weaker class. There is no  
danger of hazardous radiation outside the unit.  
English | 5  
Playable disc type  
Disc type  
DVD  
Recording format, file type, etc.  
DVD Video (Region Code: 4)*1  
Playable  
DVD Audio  
DVD-ROM  
DVD Recordable/Rewritable  
(DVD-R*2/-RW, +R/+RW*3)  
• Compliant to UDF bridge format  
• DVD-RAM cannot be played.  
DVD Video  
DivX/MPEG1/MPEG2  
JPEG  
MP3/WMA/WAV  
MPEG4  
DVD-VR, +VR  
DVD side  
Non-DVD side  
Audio CD/CD Text (CD-DA)  
VCD (Video CD)  
DTS-CD*4  
Dual Disc  
CD/VCD  
CD-ROM  
CD-I (CD-I Ready)  
CD-DA  
MP3/WMA/WAV  
JPEG  
DivX/MPEG1/MPEG2  
MPEG4  
CD Recordable/Rewritable  
(CD-R/-RW)  
• Compliant to ISO 9660 level 1,  
level 2, Romeo, Joliet  
1
*
*
*
If you insert a DVD Video disc of an incorrect Region Code, “Region code error” appears on the monitor.  
DVD-R recorded in multi-border format is also playable (except for dual layer discs).  
It is possible to play back finalized +R/+RW (Video format only) discs. However, the use of +R double layer disc is  
not recommended.  
2
3
4
*
To reproduce DTS sound, use the digital connection. (Installation/Connection Manual)  
• “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other  
countries.  
Caution for DualDisc playback  
Notes on reproduced sound (page 38)  
Through the analog terminals (Speaker out/LINE  
OUT) of this unit...  
• Multi-channel signals are downmixed.  
• DTS sound cannot be reproduced.  
The Non-DVD side of a “DualDisc” does not comply  
with the “Compact Disc Digital Audio” standard.  
Therefore, the use of Non-DVD side of a DualDisc on  
this product may not be recommended.  
6 | KDV-MP7032  
Before operating the unit  
Cancel the display demonstration and set the clock. (also pages 28 and 29)  
Indication language: In this manual, English indications are used for purpose of explanation. You  
can select the indication language on the monitor. (page 29)  
Setup menu icon  
AV Menu  
ENT  
Setup  
Enter  
Currently selected menu  
~ Turn on the power.  
Ÿ Display <AV Menu>.  
! Enter the <Setup> menu.  
Select <Display> ] <Demonstration>, then activate the <Demonstration> screen.  
Setup  
Display  
Demonstration  
Display  
Demonstration  
Wall Paper  
Scroll  
Tag Display  
Dimmer  
Off  
Clock  
On  
Disc Setup 1  
Disc Setup 2  
Tuner  
ENT  
Demonstration  
On  
Exit  
Currently selected submenu  
Current setting  
@ Cancel the display demonstrations.  
Select <Off>.  
Demonstration  
Off  
On  
ENT  
Exit  
Continued on the next page  
English | 7  
INTRODUCTION  
(twice)  
Clock  
Time Set  
12Hours/24Hours  
OSD Clock  
1:00AM  
¤ Return to the <Setup> menu.  
Select either the 12-hour or 24-hour  
system.  
# Select <Clock> ]<Time Set>, then  
12Hours/24Hours  
12 Hours  
activate the <Time Set> screen.  
24 Hours  
Set the clock time.  
Time Set  
Hours  
ENT  
Exit  
^ Return to the <Clock> menu.  
Select <OSD Clock>.  
1 : 00AM  
ENT  
Exit  
& Activate the <OSD Clock> screen.  
Select the <OSD Clock> setting.  
Time Set  
Minutes  
Off: The clock time is not displayed while  
playing back a video source.  
3 : 45PM  
On: The clock time is displayed while playing  
back a video source.  
ENT  
Exit  
* Finish the procedure.  
$ Return to the <Clock> menu.  
Select <12Hours/24Hours>.  
% Activate the <12Hours/24Hours>  
screen.  
8 | KDV-MP7032  
Basic operations — Control panel  
• Turn on the power.  
• Turn off the power [Hold].  
• Attenuate the sound (if the  
power is on).  
Select the source.  
TUNER = DISC (DVD/VCD/CD), =  
AV-IN =(back to the beginning)  
• You cannot select these sources if they are not ready.  
Change the aspect ratio.  
Display or erase  
Change the control panel  
tilt (Tilt1 – Tilt4).  
<AV Menu>*1.  
Change the display information.  
Display window  
Adjust the  
volume.  
Eject the disc.  
Remote sensor  
Reset the unit.  
• Use only when the internal  
system malfunctions.  
• DISC: Start playback.  
• On menus: Enter. (  
ENT  
: [Press]/  
ENT  
4 / ¢  
: [Hold])  
• TUNER: Search for stations.  
• DISC: Select chapters/tracks.  
• On menus: Go to previous/  
next step.  
5 / *3  
• TUNER: Select preset stations.  
• DISC: Select titles/folders.  
• On menus: Select items.  
Detach the control panel*2.  
• TUNER: Select the bands.  
• DISC: Stop playback.  
• On menus: Back.  
*1 <AV Menu> screens  
You can use the menus to set up various settings.  
The <AV Menu> screen consists of the following sub-menus—  
Setup/Equalizer/Sound/Mode/List.  
• For details, see page 27.  
*2 To attach the control panel  
3
*
By holding 5 / , you can display the list accessible for the  
selected source.  
English | 9  
Basic operations — Remote controller  
Installing the lithium coin battery (CR2025)  
Main elements and features  
If the range of effectiveness of the remote controller  
decreases, replace the battery.  
For USA-California Only  
This product contains a CR Coin Cell Lithium Battery  
which contains Perchlorate Material—special  
handling may apply.  
Before using the remote controller:  
• Aim the remote controller directly at the remote  
sensor on the unit.  
• DO NOT expose the remote sensor to bright light  
(direct sunlight or artificial lighting).  
1
• Turns on the power.  
• Attenuates the sound if the power is on.  
• Turns off the power if pressed and held (while  
the power is on).  
2
3
4
Selects the source.  
The unit is equipped with the steering wheel  
remote control function.  
• See the Installation/Connection Manual (separate  
volume) for connection.  
Selects the FM/AM, and satellite radio bands.  
Changes the aspect ratio of the playback  
pictures.  
Not used for this unit.  
Adjusts the volume level.  
5
6
Warning:  
To prevent accidents and damage  
• Not used as 2nd VOL button for this unit.  
7*1 • DVD/DivX 6: Shows the disc menu.  
• VCD: Resumes PBC playback (page 21).  
8*1 Not used as SETUP button for this unit.  
• Do not install any battery other than CR2025 or  
its equivalent.  
• Store the battery in a place where children  
cannot reach.  
9
SHIFT button  
• Do not recharge, short, disassemble, or heat the  
battery or dispose of it in a fire.  
• Do not leave the battery with other metallic  
materials.  
• Do not poke the battery with tweezers or similar  
tools.  
• Wrap the battery with tape and insulate when  
throwing away or saving it.  
10 | KDV-MP7032  
p
q
7 (stop), 3 (play), 8 (pause)  
3 (play) also functions as ZOOM button when  
pressed with SHIFT button (page 22).  
For advanced disc operations:  
5 / ∞  
DVD: Selects the titles.  
Other discs except VCD/CD: Selects the folders.  
4 / ¢:  
Press briefly: reverse skip/forward skip  
Press and hold: reverse search/forward search  
1 / ¡: reverse search/forward search  
For FM/AM operations:  
5 / : Changes the preset stations.  
4 / ¢:  
– Functions to search for stations.  
Press briefly: Auto Search  
Press and hold: Manual Search  
Shows the on-screen bar.  
w
• Also functions as DIRECT button when pressed  
with SHIFT button. (pages 20 and 21)  
e*1 • DVD/DivX 6: Shows the disc menu.  
• VCD: Resumes PBC playback. (page 21)  
r*1 • Makes selection/settings.  
~: Skips back or forward by 5 minutes for  
DivX/MPEG1/MPEG2.  
t*1 RETURN button  
y
• DVD: Selects audio language (  
subtitles ( ), angle ( )*2.  
• DivX: Selects audio language (  
subtitles ( ).  
),  
),  
• VCD: Selects audio channel (  
).  
1
*
Functions as number buttons when pressed with  
SHIFT button.  
TUNER: Selects preset station.  
DISC: Selects chapter/title/folder/track.  
Not used as SURROUND button for this unit.  
2
*
English | 11  
Listening to the radio  
POWER]ON  
Band  
Preset No.  
page 25  
FLAT  
TUNER  
FM1 Preset1  
ABC Radio  
87.5 MHz  
3: 45PM  
MO DX  
Assigned station name  
(page 26). If no name  
is assigned, “No Name”  
appears.  
Tuner indicators  
~ Select “TUNER”.  
Ÿ Select the bands.  
! Search for a station—Auto Search.  
• Manual Search: Hold either 4 or ¢ until “Manual Search” appears on the display, then press it  
repeatedly.  
• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.  
4
When an FM stereo broadcast is  
hard to receive  
Mono  
Off  
On  
1
AV Menu  
ENT  
Exit  
Reception improves, but stereo effect will be lost.  
• The MO indicator lights up.  
ENT  
Setup  
Enter  
2
3
To restore stereo effect, select <Off> in step 4.  
AV Menu  
ENT  
Mode  
Enter  
Mode menu icon  
Mode  
Mono  
DX/Local  
SSM  
Title Entry  
Off  
12 | KDV-MP7032  
Tuning in to stations with  
sufficient signal strength  
FM station automatic presetting  
—SSM (Strong-station  
This function works only for FM bands.  
Once you have activated this function (selected  
<Local>), it always works when searching for FM  
stations.  
Sequential Memory)  
This function works only for FM bands.  
You can preset six stations for each band.  
1
AV Menu  
AV Menu  
1
ENT  
Setup  
Enter  
ENT  
Setup  
Enter  
2
3
2
AV Menu  
AV Menu  
ENT  
Mode  
Enter  
ENT  
Mode  
Enter  
Mode menu icon  
Mode menu icon  
3
4
Mode  
Mode  
Mono  
Mono  
DX/Local  
SSM  
DX/Local  
SSM  
Title Entry  
Title Entry  
ENT  
Start  
DX  
Local FM stations with the strongest signals are  
searched and stored automatically in the FM band.  
DX/Local  
DX  
Local  
ENT  
Exit  
Only stations with sufficient signal strength will be  
detected.  
• The DX indicator goes off, then the LO indicator  
lights up.  
English | 13  
Manual presetting  
Selecting preset stations  
Ex.: Storing FM station of 92.5 MHz into preset  
number 4 of the FM1 band.  
On the remote:  
1
2
1
1
4
2
5
3
6
2 Tune in to a station you want to preset.  
No Name  
92.5 MHz  
or  
3
ENT  
Store  
FM1  
On the unit:  
1
2
3
4
5
6
87.5  
89.9  
97.9  
105.9  
108.0  
107.9  
ENT  
Preset List appears.*  
4 Select a preset number.  
or  
1
ENT  
FM1  
Store  
ENT  
Store  
FM1  
1
2
3
4
5
6
87.5  
89.9  
1
2
3
4
5
6
87.5  
89.9  
97.9  
97.9  
105.9  
108.0  
107.9  
92.5  
108.0  
107.9  
ENT  
ENT  
5
FLAT  
TUNER  
• Each time you hold the button,  
you can change the FM bands.  
FM1 Preset4  
No Name  
92.5 MHz  
3:45PM  
DX  
2
ENT  
FM1  
Store  
1
2
3
4
5
6
87.5  
89.9  
97.9  
92.5  
108.0  
The station selected in step 2 is now stored in  
preset number 4.  
107.9  
ENT  
* Each time you hold the button, you can change  
the FM bands.  
• Preset List can also be accessed through <AV  
Menu> = <List>. (right)  
• Preset List can also be accessed through <AV  
Menu> = <List>.  
AV Menu  
ENT  
Setup  
Enter  
Enter  
AV Menu  
ENT  
List  
List menu icon  
14 | KDV-MP7032  
Disc operations  
The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends  
on its internal program).  
If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the  
disc.  
If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do.  
• In some cases, without showing “ ”, operations will not be accepted.  
Insert the disc.  
Playback starts automatically.  
Caution:  
Label side  
Do not place your finger behind the  
control panel.  
Caution on volume setting:  
Discs produce very little noise compared  
with other sources. Lower the volume  
before playing a disc to avoid damaging  
the speakers by the sudden increase of the  
output level.  
DISP: Press if no playback picture appears, but disc  
information (pages 16 and 17) screen is displayed.  
DISC  
Now Reading ...  
3:45PM  
0: Eject the disc.  
7: Stop playback.  
3: Start playback if necessary.  
English | 15  
While playing the following discs, press  
.
• Each time you press the button, playback picture and disc information screens appear alternately.  
• For discs except DVD and VCD: The control screen appears on the connected external monitor. (page 37)  
page 25  
Audio format  
Disc type  
VIDEO  
DIGITAL  
FLAT  
DVD  
T 01 C 02  
0:45:38  
PM  
CHAP. RPT  
3:45  
4 ¢ Press: Select chapter  
Hold: Reverse/forward search*1  
Press: Select title  
Playback mode  
Title no./Chapter no./Playing time  
5∞  
page 25  
DivX  
FLAT  
CD  
T 01 C 02  
0:45:38  
Current Folder Name  
Current File Name.avi  
PM  
RPT  
3:45  
Press: Select track  
Hold: Reverse/forward search for DivX/MPEG*2  
Press: Select folder  
Hold: Display Folder List  
For DivX/MPEG: Folder no./Track no./Playing time  
For JPEG: Folder no./Track no.  
5∞  
page 25  
PBC  
FLAT  
VCD  
01 0:45:38  
PM  
3:45  
Press: Select track  
Hold: Reverse/forward search*1  
PBC indicator  
lights up when PBC is in use.  
Track no./Playing time  
16 | KDV-MP7032  
page 25  
FLAT  
CD  
01 0:45:38  
Disc Title  
Artist Name  
Current Track Title  
RPT  
PM  
3:45  
Press: Select track  
Hold: Reverse/forward search*1  
Disc title/Artist name/Track  
title (only for CD Text)*3  
Track no./Playing time  
Audio format  
(MP3/WMA/WAV)  
page 25  
MP3  
FLAT  
CD  
01  
02  
0:45:38  
Current Folder Name  
Current File Name.mp3  
PM  
RPT  
3:45  
4
Press: Select track  
Hold: Reverse/forward search*1  
Press: Select folder  
Hold: Display Folder List  
Folder no./Track no./Playing time  
*
5∞  
1
2
3
4
*
*
*
*
Search speed: x2 ]x10.  
Search speed: ¡1 ]¡2.  
“No Name” appears for conventional CDs.  
Tag data will be shown instead of folder/file names when they are recorded and <Tag Display> is set to <On>. (page  
28)  
English | 17  
Selecting playback modes  
You can use only one of the following playback  
modes—Intro/Repeat/Random.  
Ex. To select Track Repeat  
3
4
Mode  
Off  
All Off  
Intro  
Repeat  
Random  
AV Menu  
1
Repeat  
ENT  
Setup  
Enter  
Off  
Track  
Folder  
2
AV Menu  
ENT  
Set  
When one of the playback modes is selected,  
the corresponding indicator lights up on the disc  
information screen.  
ENT  
Mode  
Enter  
Mode menu icon  
To cancel, select <All Off> in step 3 or <Off> in  
step 4.  
Disc type  
Intro  
Repeat  
Random  
Chapter: Repeats current  
chapter  
Title: Repeats current title  
Track: Plays the first 15  
seconds of each track (for  
VCD: PBC not in use)  
Track: Repeats current track Disc: Randomly plays all tracks  
(for VCD: PBC not in use) (for VCD: PBC not in use)  
Track: Plays the first 15  
seconds of each track  
Folder: Plays the first 15  
seconds of the first track of  
each folder  
Track: Repeats current track Folder: Randomly plays all  
Folder: Repeats all tracks of  
tracks of current folder,  
then tracks of next folders  
Disc: Randomly plays all tracks  
the current folder  
Track: Repeats current track  
Folder: Repeats current folder  
Folder: Repeats current folder  
18 | KDV-MP7032  
Selecting tracks on the list  
Prohibiting disc ejection  
If a disc includes folders, you can display the Folder/  
Track (File) Lists, then start playback.  
You can lock a disc in the loading slot.  
1
Folder List  
My Best  
Cinema  
NO EJECT?  
EMERGENCY EJECT?  
Pops  
My Best2  
Favorite Song  
Cinema2  
“No Eject” appears.  
ENT  
To cancel the prohibition, repeat the same  
procedure to select “EJECT OK?”.  
Folder List appears.  
• Hold the button to see the next/previous folders.  
2 Select a folder, then activate the Track List.  
Folder List  
My Best  
Cinema  
Pops  
My Best2  
Favorite Song  
Cinema2  
ENT  
Track List of the selected folder appears.  
3 Select a track, and start playing.  
File List  
Song011.mp3  
Song012.mp3  
Song013.mp3  
Song014.mp3  
Song015.mp3  
Song016.mp3  
ENT  
• Folder List can also be accessed through <AV  
Menu> = <List>.  
AV Menu  
ENT  
Setup  
Enter  
Enter  
AV Menu  
ENT  
List  
List menu icon  
English | 19  
Operations using the remote controller  
:
:
:
Stop playback.  
Pause (Frame by frame playback if pressed during pause).  
Start playback.  
:
Reverse/forward search*1. (No sound can be heard.)  
(Slow motion*2 during pause. No sound can be heard.)  
:
Press: Select chapter (within the same title, during play or pause).  
Hold: Reverse/forward search*3  
: Select title (during play or pause).  
:
:
:
:
Select aspect ratio.  
Using menu driven features...  
1
2 Select an item you want to  
Select subtitle language.  
Select audio language.  
Select view angle.  
start play.  
+(  
=
) =  
:
3
Select chapter (during play or pause).  
Select title (when not playing).  
+(  
=
=
) =  
:
Select title (during play or pause).  
: Stop playback.  
: Pause (Frame by frame playback if pressed  
during pause).  
For DivX 6: Using menu driven features...  
1
2 Select an item you want to start play.  
: Start playback.  
: Reverse/forward search*4. (No sound  
can be heard.)  
: Press: Select track.  
3
Hold: Reverse/forward search*5. (No  
sound can be heard.)  
While playing...  
: Select folder.  
: Select aspect ratio.  
: Select subtitle language. (DivX only)  
: Select audio language. (DivX only)  
: Return/advance the scenes by 5 minutes.  
Current playback position  
+(  
=
) =  
:
2nd press  
3rd press  
1st press  
Select track (within the same folder).  
2nd press  
1st press  
20 | KDV-MP7032  
: Stop playback.  
+(  
=
) =  
:
: Shows the current file until you change it.  
: Start playback (Slide show: each file is shown  
for a few seconds.).  
Select track (within the same folder).  
: Select track.  
: Select folder.  
: Select aspect ratio.  
:
:
Stop playback.  
Pause (Frame by frame playback if pressed  
during pause).  
Start playback.  
+(  
=
) =  
:
:
Select track.  
:
During PBC playback...  
+(  
Select an item on the menu.  
:
Reverse/forward search*1. (Forward slow  
motion*2 during pause. No sound can be  
heard.)  
=
) =  
• To return to the previous menus, press  
.
• Reverse slow motion does not work.  
:
To cancel PBC playback  
1
Press: Select track.  
2
+(  
=
) =  
/
Hold: Reverse/forward search*3. (No sound  
can be heard.)  
• To resume PBC, press  
:
:
Select aspect ratio.  
Select audio channel (ST: stereo, L: left,  
R: Right).  
: Stop playback.  
: Pause.  
+(  
=
) =  
:
: Start playback.  
Select track (within the same folder).  
: Reverse/forward search*1.  
: Press: Select tracks.  
Hold: Reverse/forward search*3.  
: Select folder.  
1
*
*
*
*
*
Search speed: x2 ]x5 ]x10 ]x20 ]x60  
Slow motion speed: 1/32 ]1/16 ]1/8 ]1/4 ]1/2  
Search speed: x2 ]x10  
Search speed: ¡1 ]¡2 ]¡3  
Search speed: ¡1 ]¡2  
: Stop playback.  
: Pause.  
2
3
4
5
: Start playback.  
: Reverse/forward search*1.  
: Press: Select track.  
Hold: Reverse/forward search*3.  
+(  
=
) =  
: Select track.  
English | 21  
Enlarging the view (Zoom in)  
During moving picture playback...  
While pausing...  
ZOOM 1  
ZOOM 2  
ZOOM OFF  
ZOOM 1  
ZOOM 2  
ZOOM 6  
ZOOM 3  
ZOOM 4  
ZOOM OFF  
ZOOM 5  
To cancel zoom, select “ZOOM OFF”.  
Move the enlarged  
portion.  
Operations using the on-screen bar (DVD/VCD/DivX/MPEG1/MPEG2/  
JPEG)  
These operations are possible on the monitor using the remote controller.  
~ Display the on-screen bar. (page23)  
(twice)  
Ÿ Select an item.  
! Make a selection.  
If a pop-up menu appears...  
• For entering time/numbers...  
: Move the entry position  
: Select a number  
To remove the on-screen bar  
22 | KDV-MP7032  
On-screen bar  
Information  
Operation  
T02-C03 TOTAL 1:25:58  
C. RPT  
CHAP RPT  
DVD-V  
TIME  
TITLE  
Above example is of DVD Video. Items shown on the bar vary due to the disc type.  
1 Disc type  
6 Playback status  
2 • DVD: Audio signal format  
• VCD: PBC  
Play  
Reverse/forward search  
3 Playback mode*  
DVD Video:  
Reverse/forward slow-motion  
Pause  
Stop  
T. RPT:  
C. RPT:  
Title repeat  
Chapter repeat  
7 Operation icons  
DivX/MPEG:  
Change time indication (see 5)  
Time Search (Specify a certain scene  
by entering time.)  
Title Search (by its number)  
Chapter Search (by its number)  
Track Search (by its number)  
Repeat play*  
Intro play*  
Random play*  
Change the audio language or audio  
channel  
TIME  
T. RPT:  
F. RPT:  
Track repeat  
Folder repeat  
TITLE  
CHAP  
TRACK  
JPEG:  
VCD:  
F. RPT:  
Folder repeat  
RPT  
INT  
T. RPT:  
Track repeat  
D. RND: Disc random  
T. INT: Track intro  
4 Playback information  
RND  
Current title/chapter  
T02-C03  
TRACK 01  
F001-T001  
F001-F002  
Current track  
Current folder/track  
Current folder/file  
Change the subtitle language  
Change the view angle  
5 Time indication  
* page 18  
TOTAL  
Elapsed playing time of the disc  
Remaining title time (for DVD)  
Remaining disc time (for others)  
Elapsed playing time of the current  
chapter/track  
Remaining time of the current  
chapter/track  
T. REM  
TIME  
REM  
English | 23  
Listening to other external components  
AV-INPUT  
You can connect an external component to the LINE IN/VIDEO IN plugs.  
DISP: Press if no playback picture appears, but source information (this) screen is displayed.  
Assigned title (page 26)  
page 25  
POWER]ON  
FLAT  
AV-IN  
AV-INPUT  
3: 45PM  
~ Select “AV-IN.”  
Ÿ Turn on the connected component and start playing the source.  
If you select <Camera Mirror> for <AV Input> (page 32), some status messages such as  
volume level change will not appear on the monitor while viewing the picture.  
24 | KDV-MP7032  
Sound equalization  
POWER]ON  
Edit  
+03  
ENT  
60.0 Hz  
Store  
Storing your own adjustment  
You can store your adjustment into User1, User2, and  
User3.  
Selecting sound mode  
~
AV Menu  
1 Repeat steps ~ and Ÿ, then...  
ENT  
Setup  
Enter  
Equalizer  
Flat  
Hard Rock  
R&B  
Pop  
Ÿ
Jazz  
Equalizer menu icon  
ENT  
Exit  
AV Menu  
Edit  
+03  
Equalizer  
ENT Enter  
ENT  
60.0 Hz  
Store  
!Select a sound mode.  
2 Adjust.  
Equalizer  
Flat  
Hard Rock  
R&B  
Pop  
Jazz  
ENT  
Exit  
• For preset values of each sound mode, page  
39  
3 Store.  
User Store  
User1  
User2  
User3  
ENT  
Store  
English | 25  
Assigning titles to the sources  
Press: Change character set  
Hold: Erase title  
POWER]ON  
Title Entry  
Station Name  
ABC Radio  
DISP  
ENT  
Store  
A a 0 Á á  
You can assign titles as follows.  
3
Mode  
FM/AM stations Up to 16 characters—up to 30  
Mono  
DX/Local  
SSM  
stations.  
Title Entry  
AV-IN  
Up to 16 characters  
• If you try to assign a title to a 31st station, “Name  
Full” flashes on the monitor. Delete unwanted titles  
before assignment.  
Ex. When you select FM as the source  
Title Entry  
Station Name  
ABC  
~ Select the source.  
DISP  
ENT  
Store  
A a 0 Á á  
• For FM/AM stations: Select the band, then  
tune into a station.  
! Assign a title.  
1 Select a character, then move the entering  
• For “AV-IN”: Select the source.  
position.  
Ÿ Display the title entry screen.  
1
AV Menu  
ENT  
Setup  
Enter  
• To change the character set, press DISP.  
(For available characters, page 38.)  
2 Repeat step 1 until you finish entering the  
title.  
2
AV Menu  
Mode  
Finish the procedure.  
ENT  
Enter  
Mode menu icon  
26 | KDV-MP7032  
Menu operations  
POWER]ON  
Setup  
Equalizer  
Sound  
AV Menu  
ENT  
Setup  
Enter  
Mode  
List  
Ex. Changing the <High Pass Filter> setting  
!
Sound  
Fader/Balance  
Volume Adjust  
Subwoofer  
High Pass Filter  
Crossover  
AV Menu  
~
Through  
ENT  
Enter  
Setup  
• For some items, repeat this steps to set the  
sub-items.  
Non-available items will be displayed being  
shaded.  
Ÿ
Sound menu icon  
High Pass Filter  
Through  
On  
AV Menu  
ENT  
Exit  
Sound  
ENT Enter  
Menu items  
Display  
Clock  
Setup  
Equalizer  
Sound  
AV Menu  
Setup  
Disc Setup 1  
Disc Setup 2  
Tuner  
ENT  
Enter  
List  
Input  
Mode  
Others  
• The display indications may change according to change of the specifications.  
English | 27  
Initial: Underlined  
Setup  
Menu items  
Demonstration  
Selectable settings, [reference page]  
Off : Cancels.  
On : Activates the demonstration on the monitor.  
Wall Paper  
Scroll  
You can select the background picture of the monitor.  
Off : Cancels.  
Once : Scrolls the disc information once.  
Auto : Repeats scrolling (5-second intervals).  
• Holding DISP scrolls the information regardless of this setting.  
Tag Display  
Dimmer  
Off : Cancels.  
On : Shows the Tag data while playing MP3/WMA/WAV tracks.  
Off : Cancels.  
On : Activates dimmer.  
Auto : Dims the monitor when you turn on the headlights.*1  
Time Set : Press ENT (or ¢) to display the time setting screen, then  
set the Dimmer On/Off times.  
Bright  
You can adjust brightness of the monitor.  
–15 (darkest) to +15 (brightest); Initial 00  
Picture Adjust*2  
You can adjust the following to make the monitor clear and legible for  
watching the playback picture. The setting will be stored separately for  
“DISC” and “AV-IN”.  
–15 to +15; Initial 0  
Bright : Adjust if the picture is too bright or too dark.  
Contrast : Adjust the contrast.  
Color : Adjust the color of the picture—lighter or darker.  
Tint : Adjust the tint if the human skin color is unnatural.  
1
2
*
*
The ILLUMINATION CONTROL lead connection is required. (Installation/Connection Manual)  
Adjustable only when the source is a disc containing pictures or movies, or “AV-IN”.  
28 | KDV-MP7032  
Menu items  
Selectable settings, [reference page]  
Aspect*3  
You can change the aspect ratio of the picture.  
Aspect ratio of incoming signal  
4:3 16:9  
Full :  
For 16:9 original  
pictures  
Auto :  
For “DISC”: Aspect ratio is automatically  
selected to match to the incoming signals.  
For the other video sources: Aspect ratio is  
fixed to <Regular>.  
Regular :  
For 4:3 original pictures  
Language*4  
Select the indication language shown on the monitor.  
English, Spanish, French, German, Italian, Dutch, Swedish,  
Danish, Russian  
Time Set  
Initial 1:00 AM, [8]  
12 Hours, 24 Hours, [8]  
Off, On, [8]  
12Hours/24Hours  
OSD Clock  
3
4
*
*
Not adjustable for audio sources.  
After you change the indication language setting, turn off then on the power so that your setting takes effect.  
English | 29  
Menu items  
Selectable settings, [reference page]  
Menu Language  
Select the initial disc menu language; Initial English (also page  
39).  
Audio Language  
Subtitle  
Select the initial audio language; Initial English (also page 39).  
Select the initial subtitle language or erase the subtitle (<Off>); Initial  
Off (also page 39).  
OSD Language  
Select the on-screen language used for the external monitor connected  
to the VIDEO OUT plug; Initial English.  
Monitor Type  
Select the monitor type to watch a wide screen picture on the external  
monitor.  
16:9  
4:3 Letterbox  
16:9 : Select when the aspect ratio of the external monitor is 16:9.  
4:3 Letterbox/4:3 Pan Scan : Select when the aspect ratio of the  
external monitor is 4:3. Refer to the illustrations on the left to see  
how the pictures are shown on the monitor.  
4:3 Pan Scan  
OSD Position  
Select the position of the on-screen bar, [23].  
1 : Higher position  
Position 1  
Position 2  
2 : Lower position  
File Type  
Select playback file type when a disc contains different types of files.  
Audio : Plays back audio files.  
Still Picture : Plays back JPEG files.  
Video : Plays back DivX/MPEG1/MPEG2 files.  
DivX Regist. (Registration)  
This unit has its own Registration Code. Once you have played back a  
disc in which the Registration Code recorded, this unit’s Registration  
Code is overwritten for copyright protection.  
5
*
Selectable only for “DISC” (disc playback pauses).  
30 | KDV-MP7032  
Menu items  
Selectable settings, [reference page]  
D. Audio Output  
Select the signal format emitted through the DIGITAL OUT (optical)  
terminals. (also page 38)  
PCM Only : Select this when connecting an amplifier or a decoder  
incompatible with Dolby Digital, DTS, or MPEG Audio, or  
connecting to a recording device.  
Dolby Digital : Select this when connecting an amplifier or a decoder  
compatible with Dolby Digital.  
Stream : Select this when connecting an amplifier or a decoder  
compatible with Dolby Digital, DTS, or MPEG Audio.  
Down Mix  
When playing back a multi-channel disc, this setting affects the signals  
reproduced through the LINE OUT plugs.  
Dolby Surround : Select this to enjoy multi-channel surround audio  
by connecting an amplifier compatible with Dolby Surround.  
Stereo : Normally select this.  
D. (Dynamic) Range Compres. You can enjoy a powerful sound at a low volume level while playing  
(Compression)  
Dolby Digital software.  
Auto : Select to apply the effect to multi-channel encoded software.  
On : Select this to always use this function.  
IF Band Width  
Auto : Increases the tuner selectivity to reduce interference noises  
between adjacent stations. (Stereo effect may be lost.)  
Wide : Subject to the interference from adjacent stations, but sound  
quality will not be degraded and the stereo effect will remain.  
Area Setting  
US : When using in North/Central/South America. FM/AM intervals are  
set to 200 kHz/10 kHz.  
Europe : When using in any other areas. FM/AM intervals are set to 50  
kHz (100 kHz during auto search)/9 kHz.  
South America : When using in South American countries where FM  
interval is 100 kHz. AM interval is set to 10 kHz.  
5
*
Selectable only for “DISC” (disc playback pauses).  
English | 31  
Menu items  
AV Input  
Selectable settings, [reference page]  
You can determine the use of LINE IN and VIDEO IN plugs.  
Off : Select when no component is connected (“AV-IN” is skipped while  
selecting the source).  
Audio&video : Select when connecting an AV component such as a  
VCR.  
Audio : Select when connecting an audio component such as a digital  
audio player.  
Camera*6: Select when connecting the rear view camera.  
Camera Mirror*6: The mirror image of the rear view is displayed on  
the monitor. (The monitor on the unit only; the normal rear view  
appears on the external monitor.)  
External Input  
Beep  
Keep “Changer” to use.  
Off : Cancels.  
On : Activates the key-touch tone.  
Telephone Muting*7  
Off : Cancels.  
Muting1, Muting2 : Select either one which mutes the sounds while  
using the cellular phone.  
Initialize  
Initialize all settings you have made in <AV Menu>. Press ENT, then  
reset the unit (page 3).  
6
7
*
Reverse lamp lead connection is required. See Installation/Connection Manual (separate volume). The rear view  
through the camera appears on the monitor in “Full” aspect ratio (regardless of the aspect ratio setting) when you  
shift the gear to the reverse (R) position.  
*
The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume).  
32 | KDV-MP7032  
Equalizer  
Menu items  
Selectable settings, [reference page]  
Flat/Hard Rock/R&B/Pop/Jazz/  
Dance/Country/Reggae/Classic/  
User1/User2/User3  
[25]  
Sound  
Menu items  
Selectable settings, [reference page]  
Fader/Balance  
Adjusts fader  
Adjust fader—speaker output balance between the front and rear  
speakers.  
• Upmost—front only  
• Downmost—rear only  
When using a two-speaker system, set the fader to the center (00).  
Adjust balance—speaker output balance between the left and right  
speakers.  
Adjust balance  
• Leftmost—left only  
• Rightmost—right only  
Volume Adjust  
Adjust and store auto-adjustment volume level for each source,  
comparing to the FM volume level. The volume level will automatically  
increase or decrease when you change the source.  
–12 to +12; Initial 00  
Subwoofer  
Adjust the settings below in the submenu:  
Phase : Subwoofer phase. Select either <Normal> or <Reverse>,  
which reproduces a better sound.  
Level: Subwoofer output level. Level: –06 to +08; Initial 00  
High Pass Filter  
Crossover  
Through : Select when the subwoofer is not connected.  
On : Select when the subwoofer is connected.  
Adjust the crossover frequency between the front/rear speakers and the  
subwoofer.  
80Hz, 120Hz, 150Hz  
Amplifier Gain  
You can change the maximum volume level of this unit.  
Off : Deactivates the built-in amplifier.  
Low Power : VOL 00 to 30 (Select this if the maximum power of the  
speakers is less than 50 W)  
High Power : VOL 00 to 50  
English | 33  
Mode*8  
Menu items  
Selectable settings, [reference page]  
Mono  
Only for FM. (Off, On), [12]  
DX/Local  
SSM  
Only for FM. (DX, Local), [13]  
Only for FM. [13]  
Title Entry  
Only for FM/AM stations, and “AV-IN”. [26]  
All Off/Intro/Repeat/Random Only for disc playback. [18]  
List  
The accessible lists differ depending on the sources, [14, 19]  
8
*
Items listed under <Mode> vary among the playback sources.  
34 | KDV-MP7032  
More about this unit  
Ejecting a disc  
General  
• If the ejected disc is not removed within 15 seconds,  
the disc is automatically inserted again into the  
loading slot to protect it from dust. (Disc playback  
starts.)  
Turning on the power  
• By pressing SRC (source) on the unit, you can also  
turn on the power. If the source is ready, playback  
starts.  
Changing the source  
• If you change the source, playback also stops without  
ejecting the disc.  
FM/AM  
Storing stations in memory  
• When SSM is over, received stations are preset in No.  
1 (lowest frequency) to No. 6 (highest frequency).  
Next time you select “DISC” for the playback source,  
disc play starts from where it stopped previously.  
Playing Recordable/Rewritable discs  
Disc  
• This unit can recognize a total of 5 000 files and 250  
folders (a maximum of 999 files per folder).  
• Use only “finalized” discs.  
• This unit can play back multi-session discs; however,  
unclosed sessions will be skipped while playing.  
• This unit can recognize a total 25 characters for file/  
folder names.  
General  
• In this manual, words “track” and “file” are  
interchangeably used.  
• This unit can also play back 8 cm (3-3/16”) discs.  
• This unit can only play back audio CD (CD-DA) files  
if different type of audio files (MP3/WMA/WAV) are  
recorded in the same disc.  
• Some discs or files may not be played back due to  
their characteristics or recording conditions.  
• This unit can display only one-byte characters. No  
other characters can be correctly displayed.  
Inserting a disc  
• When a disc is inserted upside down, “Cannot play  
this disc Check the disc” appears on the monitor. Eject  
the disc.  
English | 35  
Playing DivX files  
Playing MP3/WMA/WAV files  
• This unit can play back DivX files with the extension  
code <.divx>, <.div>, <.avi> (regardless of the  
letter case—upper/lower).  
• This unit can play back files with the extension code  
<.mp3>, <.wma>, or <.wav> (regardless of the  
letter case—upper/lower).  
• This unit supports the DivX files whose resolution is  
720 x 576 pixels or less.  
• This unit can play back the files meeting the  
conditions below:  
• This unit supports DivX 6.x, 5.x, 4.x, and 3.11.  
• Audio stream should conform to MP3 or Dolby Digital.  
• This unit does not support GMC (Global Motion  
Compression).  
• The file encoded in the interlaced scanning mode  
may not be played back correctly.  
– Bit rate: MP3/WMA: 32 kbps — 320 kbps  
– Sampling frequency:  
48 kHz, 44.1 kHz, 32 kHz (for MPEG1)  
24 kHz, 22.05 kHz, 16 kHz (for MPEG2)  
48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz (for WMA)  
44.1 kHz (for WAV)  
• The maximum bit rate for video is 4 Mbps (average).  
• This unit can show ID3 Tag Version  
1.0/1.1/2.2/2.3/2.4 (for MP3). This unit can also show  
WAV Tag and WMA Tag.  
• This unit can play back files recorded in VBR (variable  
bit rate).  
Files recorded in VBR have a discrepancy in elapsed  
time indication.  
• This unit cannot play back the following files:  
Playing MPEG files  
• This unit can play back MPEG files with the extension  
code <.mpg> or <.mpeg>.  
• The stream format should conform to MPEG system/  
program stream.  
• The file format should be MP@ML (Main Profile at  
Main Level)/SP@ML (Simple Profile at Main Level)/  
MP@LL (Main Profile at Low Level).  
MP3 files encoded with MP3i and MP3 PRO format.  
– MP3 files encoded with Layer 1/2.  
– WMA files encoded with lossless, professional,  
and voice format.  
– WMA files which are not based upon Windows  
Media® Audio.  
• Audio streams should conform to MPEG1 Audio  
Layer-2.  
• The maximum bit rate for video is 4 Mbps (average).  
– WMA files copy-protected with DRM.  
– Files which have the data such as AIFF, ATRAC3,  
etc.  
Playing JPEG files  
• This unit can play back JPEG files with the extension  
code <.jpg> or <.jpeg>.  
• It is recommended that you record a file at 640 x 480  
resolution.  
• This unit can play back baseline JPEG files.  
Progressive JPEG files or lossless JPEG files cannot be  
played.  
36 | KDV-MP7032  
CD  
Control screen  
• The following control screens appear only on the  
external monitor.  
TIME  
00:14  
T. RPT  
Track : 6 / 14  
DivX/MPEG1/MPEG2/JPEG/MP3/WMA/WAV  
Cloudy  
Fair  
Fog  
Hail  
Indian summer  
Rain  
Shower  
Snow  
Thunder  
Typhoon  
Wind  
Track Information  
Album  
Four seasons  
Artist  
Robert M. Smith  
Title  
Rain  
T. RPT  
TIME 00:00:14  
Folder :  
2 / 3  
Track : 6 / 14 (Total 41)  
01 Music  
02 Music  
03 Music  
Cloudy.mp3  
Fair.mp3  
Fog.mp3  
Hail.wma  
Winter sky  
Indian summer.mp3  
Rain.mp3  
Shower.mp3  
Snow.mp3  
Thunder.wma  
Typhoon.mp3  
Wind.mp3  
Track Information  
Album  
Weather  
Artist  
Robert M. Smith  
Title  
1 Selected playback mode  
2 Elapsed playing time of the current track  
3 Operation status  
Winter sky.mp3  
Rain  
4 Current track number/total number of tracks  
on the disc  
5 Track information  
6 Track list  
7 Current track (highlighted bar)  
1 Current folder (highlighted bar)  
2 Current folder number/total folder number  
3 Folder list  
4 Selected playback mode  
5 Elapsed playing time of the current track (not  
displayed for JPEG)  
6 Operation status  
Menu settings  
• If you change the <Amplifier Gain> setting  
from <High Power> to <Low Power> while  
the volume level is set higher than “30”, the unit  
automatically changes the volume level to “VOL 30”.  
• After you change any of <Menu Language/Audio  
Language/Subtitle> settings, turn off then on the  
power, and re-insert the disc (or insert another disc)  
so that your setting takes effect.  
7 Current track number/total number of tracks  
in the current folder (total number of tracks on  
the disc)  
8 Track information (only for MP3/WMA/WAV)  
9 Track list  
p Current track (highlighted)  
• When you select <16:9> for a picture whose aspect  
ratio is 4:3, the picture slightly changes due to the  
process for converting the picture width.  
• Even if <4:3 Pan Scan> is selected, the screen size  
may become <4:3 Letterbox> for some discs.  
English | 37  
Sound signals emitted through the rear terminals  
Through the analog terminals (Speaker out/LINE OUT)  
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.  
• DTS sound cannot be reproduced.  
Through the DIGITAL OUT terminal  
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted.  
• To reproduce the multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a  
decoder compatible with these multi-channel sources to this terminal, and set <D. Audio Output> correctly.  
(page 31)  
Output signals  
Dolby Digital  
D. Audio Output  
Playback disc  
Stream  
PCM Only  
DVD  
48 kHz, 16/20/24 bits Linear PCM  
96 kHz, Linear PCM  
48 kHz, 16 bits stereo Linear PCM*  
48 kHz, 16 bits stereo Linear PCM  
48 kHz, 16 bits stereo  
Linear PCM  
with Dolby Digital  
Dolby Digital bitstream  
DTS bitstream  
48 kHz, 16 bits stereo Linear PCM  
44.1 kHz, 16 bits stereo Linear PCM /  
with DTS  
with MPEG Audio  
MPEG bitstream  
Audio CD, Video CD  
48 kHz, 16 bits stereo Linear PCM  
Audio CD with DTS  
DTS bitstream  
48 kHz, 16 bits stereo  
Linear PCM  
DivX with Dolby Digital  
Dolby Digital bitstream  
with MPEG Audio  
MPEG1/MPEG2  
MP3/WMA  
32/44.1/48 kHz, 16 bits Linear PCM  
44.1/48 kHz, 16 bits Linear PCM  
32/44.1/48 kHz, 16 bits Linear PCM  
44.1 kHz, 16 bits stereo Linear PCM  
WAV  
*
Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the  
discs are not copy-protected.  
Characters shown on the monitor  
In addition to the roman alphabet (A – Z,  
a – z), the following characters will be  
used to show the various information on  
the monitor.  
• You can also use the following  
characters to assign titles. (page 26).  
Numbers and symbols  
Upper and lower cases  
38 | KDV-MP7032  
Language codes (for DVD/DivX language selection)  
Code Language  
Code Language  
Code Language  
Code Language  
Code Language  
AA Afar  
FA Persian  
KL Greenlandic  
KM Cambodian  
KN Kannada  
KO Korean (KOR)  
KS Kashmiri  
KU Kurdish  
KY Kirghiz  
LA Latin  
LN Lingala  
LO Laothian  
OC Occitan  
OM (Afan) Oromo  
OR Oriya  
PA Panjabi  
PL Polish  
PS Pashto, Pushto TG Tajik  
PT Portuguese  
QU Quechua  
ST Sesotho  
SU Sundanese  
SW Swahili  
TA Tamil  
AB Abkhazian  
AF Afrikaans  
AM Ameharic  
AR Arabic  
FI  
FJ  
Finnish  
Fiji  
FO Faroese  
FY Frisian  
GA Irish  
GD Scots Gaelic  
GL Galician  
GN Guarani  
GU Gujarati  
HA Hausa  
TE Telugu  
AS Assamese  
AY Aymara  
AZ Azerbaijani  
BA Bashkir  
BE Byelorussian  
BG Bulgarian  
BH Bihari  
TH Thai  
TI Tigrinya  
RM Rhaeto-Romance TK Turkmen  
RN Kirundi  
RO Rumanian  
TL  
Tagalog  
LT  
Lithuanian  
TN Setswana  
TO Tonga  
TR Turkish  
TS Tsonga  
TT Tatar  
HI  
HR Croatian  
BN Bengali, Bangla HU Hungarian  
Hindi  
LV Latvian, Lettish RW Kinyarwanda  
MG Malagasy  
MI Maori  
BI  
Bislama  
SA Sanskrit  
SD Sindhi  
SG Sangho  
BO Tibetan  
BR Breton  
CA Catalan  
CO Corsican  
CS Czech  
HY Armenian  
MK Macedonian  
ML Malayalam  
MN Mongolian  
MO Moldavian  
MR Marathi  
MS Malay (MAY)  
MT Maltese  
MY Burmese  
NA Nauru  
IA  
IE  
IK  
IN  
IS  
Interlingua  
Interlingue  
Inupiak  
Indonesian  
Icelandic  
SH Serbo-Croatian TW Twi  
SI  
Singhalese  
UK Ukrainian  
UR Urdu  
UZ Uzbek  
SK Slovak  
SL Slovenian  
SM Samoan  
SN Shona  
SO Somali  
SQ Albanian  
SR Serbian  
SS Siswati  
CY Welsh  
DZ Bhutani  
VI  
Vietnamese  
IW Hebrew  
JI Yiddish  
JW Javanese  
KA Georgian  
KK Kazakh  
VO Volapuk  
WO Wolof  
XH Xhosa  
YO Yoruba  
ZU Zulu  
EL  
Greek  
EO Esperanto  
ET Estonian  
EU Basque  
NE Nepali  
NO Norwegian  
Preset equalizing values  
Frequency  
60 Hz  
150 Hz  
400 Hz  
1 kHz  
2.5 kHz 6.3 kHz  
15 kHz  
Sound mode  
Flat  
Hard Rock  
R&B  
Pop  
Jazz  
00  
00  
00  
+01  
+02  
00  
+01  
00  
00  
00  
+01  
00  
00  
00  
00  
00  
00  
00  
00  
+03  
+03  
00  
+03  
+04  
+02  
+03  
+02  
00  
+03  
+02  
+02  
+02  
+02  
+01  
00  
+02  
+01  
+01  
+03  
+01  
+01  
+02  
+02  
00  
+01  
+03  
+02  
+02  
+01  
+02  
+03  
00  
+01  
+01  
+01  
–01  
00  
+02  
00  
00  
00  
+01  
–02  
00  
+01  
00  
Dance  
Country  
Reggae  
Classic  
User1/2/3  
+03  
00  
00  
00  
English | 39  
Troubleshooting  
What appears to be trouble is not always serious. Check the following points before calling a service center.  
Symptoms  
Remedies/Causes  
• No sound comes out of the speakers.  
• Adjust the volume to the optimum level.  
• Check the cords and connections.  
• DTS sound cannot be reproduced through the analog  
terminals (Speaker out/LINE OUT).  
• The monitor is not clear and legible.  
Sunshine from the windshield may cause this symptom.  
Adjust <Bright>. (page 28)  
• The unit does not work at all.  
• “No Signal” appears.  
Reset the unit. (page 3)  
• Change the source.  
• Start the playback on the external component connected  
to VIDEO IN plug.  
• Check the cords and connections.  
• Signal input is too weak.  
• SSM automatic presetting does not work.  
• Static noise while listening to the radio.  
Store stations manually. (page 14)  
Connect the antenna firmly.  
• Disc can be neither recognized nor played .  
• Disc cannot be ejected.  
Eject the disc forcibly. (page 3)  
Unlock the disc. (page 19)  
• Recordable/Rewritable discs cannot be  
played back.  
• Tracks on the Recordable/Rewritable discs  
cannot be skipped.  
• Insert a finalized disc.  
• Finalize the discs with the component which you used  
for recording.  
• Playback does not start.  
• Insert the disc correctly again.  
• Region code of the DVD is not correct. (page 6)  
• The format of files is not supported by the unit.  
• The playback picture is not clear and legible. Adjust items in <Picture Adjust>. (page 28)  
• Sound and pictures are sometimes  
interrupted or distorted.  
• Stop playback while driving on rough roads.  
• Change the disc.  
• No playback picture appears on the monitor. Parking brake lead is not connected properly.  
(Installation/Connection Manual)  
• No picture appears on the external monitor. • Connect the video cord correctly.  
• Select the correct input on the external monitor.  
40 | KDV-MP7032  
Symptoms  
Remedies/Causes  
• Disc cannot be played back.  
• Change the disc.  
• Record the tracks using a compliant application in the  
appropriate discs. (page 6)  
• Add appropriate extension codes to the file names.  
• Noise is generated.  
The track played back is not a playable file format. Skip to  
another file.  
• Tracks are not played back as you have  
intended them to play.  
Playback order may differs from the one played back using  
other players.  
• Elapsed playing time is not correct.  
This sometimes occurs during playback. This is caused by  
how the tracks are recorded.  
• No picture appears on the monitor.  
• Turn on the video component if it is not on.  
• This unit is not connected to the video component  
correctly. Connect it correctly.  
• The playback picture is not clear and legible. Adjust items in <Picture Adjust>. (page 28)  
English | 41  
Specifications  
Power Output:  
20 W RMS × 4 Channels at 4 Ω  
and ≤ 1% THD+N  
Signal-to-Noise Ratio:  
Load Impedance:  
Equalizer Control Range: Frequencies:  
80 dBA (reference: 1 W into 4 Ω)  
4 Ω (4 Ω to 8 Ω allowance)  
60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.5 kHz,  
6.3 kHz, 15 kHz  
Level:  
10 dB  
Audio Output Level  
LINE OUT (FRONT/  
REAR)/SUBWOOFER:  
Color System:  
Line-Out Level/Impedance:  
Output Impedance:  
2.5 V/20 kΩ load (full scale)  
1 kΩ  
NTSC  
Video Output (composite):  
Other Terminals:  
1 Vp-p/75 Ω  
LINE IN, VIDEO IN, Antenna input  
VIDEO OUT, DIGITAL OUT (optical)  
Input:  
Output:  
Frequency Range:  
FM (with channel interval set to  
100 kHz or 200 kHz):  
87.5 MHz to 107.9 MHz  
87.5 MHz to 108.0 MHz  
530 kHz to 1 710 kHz  
531 kHz to 1 602 kHz  
FM (with channel interval set to  
50 kHz):  
AM (with channel interval set to  
10 kHz):  
AM (with channel interval set to  
9 kHz):  
FM Tuner  
AM Tuner  
Usable Sensitivity:  
11.3 dBf (1.0 μV/75 Ω)  
16.3 dBf (1.8 μV/75 Ω)  
65 dB  
50 dB Quieting Sensitivity:  
Alternate Channel Selectivity  
(400 kHz):  
Frequency Response:  
Stereo Separation:  
40 Hz to 15 000 Hz  
35 dB  
Sensitivity/Selectivity:  
20 μV/35 dB  
42 | KDV-MP7032  
Signal Detection System: Non-contact optical pickup (semiconductor laser)  
Frequency Response:  
DVD, fs=48 kHz:  
DVD, fs=96 kHz:  
VCD/CD:  
16 Hz to 22 000 Hz  
16 Hz to 22 000 Hz  
16 Hz to 20 000 Hz  
93 dB  
Dynamic Range:  
Signal-to-Noise Ratio:  
Wow and Flutter:  
95 dB  
Less than measurable limit  
Screen Size:  
2.7 inch wide liquid crystal display  
Number of Pixel:  
Drive Method:  
Color System:  
Aspect Ratio:  
123 200 pixels: 560 (horizontal) × 220 (vertical)  
TFT (Thin Film Transistor) active matrix format  
PAL/NTSC  
16:9 (wide)  
Allowable Storage Temperature:  
Allowable Operating Temperature:  
–10°C to +60°C (14°F to 140°F)  
0°C to +40°C (32°F to 104°F)  
Power Requirement:  
Operating Voltage:  
DC 14.4 V (11 V to 16 V allowance)  
Negative ground  
Grounding System:  
Allowable Operating Temperature:  
Dimensions (W × H × D): Installation Size (approx.):  
0°C to +40°C (32°F to 104°F)  
182 mm × 52 mm × 160 mm  
(7-3/16” × 2-1/16” × 6-5/16”)  
Panel Size (approx.):  
188 mm × 58 mm × 14 mm  
(7-7/16” × 2-5/16” × 5/8”)  
Mass (approx.):  
2.1 kg (4.7 lbs) (excluding accessories)  
Design and specifications are subject to change without notice.  
If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.  
English | 43  

Planar Systems Car Video System PT1745RPF User Manual
Pioneer XDV P9II User Manual
Philips Car Stereo System CE132 User Manual
Nikon 5x15D CF User Manual
Newcon Optik NEWCON LRB 3000 PRO User Manual
Network Technologies RACKMUX Series User Manual
MB QUART FX450 User Manual
LG Electronics LG Lifes Good Car Video System W2246T User Manual
Kenwood VIDEO CD AUTO CHANGER KDC C20V User Manual
JVC LYT2257 002A M User Manual