Kenwood KDC 8090R User Manual

CD-RECEIVER  
KDC-PS9590R  
KDC-9090R  
KDC-8090R  
INSTRUCTION MANUAL  
COMPACT  
DIGITAL AUDIO  
B64-1900-00 (EN)  
Safety precautions  
IMPORTANT INFORMATION  
About the disc changer to be  
connected:  
To connect a disc changer having the "O-N"  
switch to this unit, set the "O-N" switch to  
"N".  
When you connect a model with no "O-N"  
switch, the converter cord CA-DS100  
available as an option may be required. For  
details, consult your Kenwood dealer.  
If a model with no "O-N" switch is  
connected, some unavailable functions and  
information that cannot be displayed are  
generated, such as the DNPS, DNPP,  
Magazine random play, and CD Text display.  
Note that none of the KDC-C100, KDC-C302,  
C205, C705, and non-Kenwood CD changers  
can be connected.  
2WARNING  
2CAUTION  
To prevent injury and/or fire, take the  
following precautions:  
Insert the unit all the way until it is fully  
locked in place. Otherwise it may fly out of  
place during collisions and other jolts.  
When extending the ignition, battery or  
ground cables, make sure to use  
automotive-grade cables or other cables  
with an area of 0.75mm (AWG18) or more  
to prevent cable deterioration and damage  
to the cable coating.  
To prevent short circuits, never put or leave  
any metallic objects (e.g., coins or metal  
tools) inside the unit.  
If the unit starts to emit smoke or strange  
smells, turn off the power immediately and  
consult your Kenwood dealer.  
To prevent damage to the machine,  
take the following precautions:  
Make sure to ground the unit to a negative  
12V DC power supply.  
Do not open the top or bottom covers of the  
unit.  
Do not install the unit in a spot exposed to  
direct sunlight or excessive heat or  
humidity. Also avoid places with too much  
dust or the possibility of water splashing.  
Do not subject the faceplate to excessive  
shock, as it is a piece of precision  
equipment.  
2
When replacing a fuse, only use a new one  
with the prescribed rating. Using a fuse with  
the wrong rating may cause your unit to  
malfunction.  
Make sure not to get your fingers caught  
between the faceplate and the unit.  
Be careful not to drop the unit or subject it  
to strong shock.  
The unit may break or crack because it  
contains glass parts.  
2CAUTION  
To prevent short circuits when replacing a  
fuse, first disconnect the wiring harness.  
Do not place any object between the  
faceplate and the unit.  
During installation, do not use any screws  
except for the ones provided. The use of  
improper screws might result in damage to  
the main unit.  
Do not apply excessive force to the moving  
faceplate. Doing so will cause damage or  
malfunction.  
You can damage both your unit and  
the CD changer if you connect them  
incorrectly.  
Do Not Load 8-cm (3-in.) CDs in the  
CD slot  
If you try to load an 8-cm CD with its adapter  
into the unit, the adapter might separate  
from the CD and damage the unit.  
Do not apply excessive force to the open  
faceplate or place objects on it. Doing so  
will cause damage or breakdown.  
— 3 —  
Safety precautions  
The illustrations of the display and the panel  
appearing in this manual are examples used  
to explain more clearly how the controls are  
used. Therefore, what appears on the  
display in the illustrations may differ from  
what appears on the display on the actual  
equipment, and some of the illustrations on  
the display may represent something  
impossible in actual operation.  
The functions that can be used and the  
information that can be displayed will differ  
depending on the external disc players  
being connected.  
Mask key  
NOTE  
If you have transmitted the Mask Key's  
signal once to the unit in advance, you will  
have to transmit it once again if the unit has  
been removed from the battery. This  
function helps prevent theft.  
When using the unit for the first time:  
In order to deactivate the demonstration  
mode, be sure to press the transmit button  
to transmit the Mask Key's signal.  
If this procedure is not carried out, the  
control panel of the unit will re-open in two  
seconds even with your vehicle's ignition  
turned off.  
If you experience problems during  
installation, consult your Kenwood dealer.  
Egnlish  
If the unit fails to operate properly, press the  
RESET button. The unit returns to factory  
settings when the RESET button is pressed.  
After you press the reset button, the Mask  
Key will be needed to restart the unit. If the  
unit still fails to operate properly after the  
RESET button has been pressed, contact  
your local KENWOOD dealer for assistance.  
Press the reset button if the CD auto  
changer is first controlled and operates  
incorrectly. The original operating condition  
will return.  
2CAUTION  
Do not loose the "Mask Key".  
If power is disconnected from the unit,  
correct operation can only be restored by the  
"Mask Key's" signal.  
DAB  
OFF  
U
VOL ADJ  
AUD  
NF  
The "Mask Key" will also be required for  
service repair.  
NOTE  
Reset button  
If you send products in for repair that include  
a mask key, make sure to present the unit  
together with the mask key.  
— 4 —  
Cleaning the Faceplate Terminals  
If the terminals on the unit or faceplate get  
dirty, wipe them with a dry, soft cloth.  
Cleaning the CD Slot  
Lens Fogging  
As dust can accumulate in the CD slot, clean  
it occasionally. Your CDs can get scratched if  
you put them in a dusty CD slot.  
Right after you turn on the car heater in cold  
weather, dew or condensation may form on  
the lens in the CD player of the unit. Called  
lens fogging, CDs may be impossible to play.  
In such a situation, remove the disc and wait  
for the condensation to evaporate. If the unit  
still does not operate normally after a whilst,  
consult your Kenwood dealer.  
Cleaning the Unit  
If the faceplate of this unit is stained, wipe it  
with a dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the  
stain off with a cloth moistened with neutral  
cleaner, then wipe neutral detergent off.  
2CAUTION  
Applying spray cleaner directly to the unit  
may affect its mechanical parts. Wiping the  
faceplate with a hard cloth or using a volatile  
liquid such as thinner or alcohol may scratch  
the surface or erases characters.  
The marking of products using lasers  
(Except for some areas)  
CLASS 1  
LASER PRODUCT  
The label is attached to the chassis/case and  
says that the component uses laser beams  
that have been classified as Class 1. It  
means that the unit is utilizing laser beams  
that are of a weaker class. There is no  
danger of hazardous radiation outside the  
unit.  
— 5 —  
Handling Compact discs  
Playing a CD that is dirty, scratched  
or warped can cause the sound to  
skip and the unit to operate  
incorrectly, resulting in worsened  
sound quality. Take the following  
precautions to prevent your CDs from  
getting scratched or damaged.  
Storing CDs  
Checking New CDs for Burrs  
Do not store CDs in areas exposed to direct  
sunlight – such as a car seat or above the  
fascia panel (dashboard) – or other hot  
places.  
A CD-R or CD-RW is more susceptible than  
a music CD to damage from high  
temperatures and humidity, and in some  
cases, may become unusable if left in the  
car for long periods of time.  
When playing a new CD for the first time,  
check that there are not any burrs stuck to  
the perimeter of the disc or in the central  
hole. CDs with burrs stuck on them may not  
load properly or may skip whilst playing.  
Remove burrs using a ballpoint pen or a  
similar utensil.  
Egnlish  
Handling CDs  
Remove CDs from the unit when not  
listening to them for a whilst, and put them  
back in their cases. Do not stack CDs that  
have been removed from their cases or  
prop them against something.  
Do not touch the recorded side of the CD  
(i.e., the side opposite the label) when  
holding it.  
Burrs  
Burrs  
Cleaning CDs  
If a CD has become dirty, wipe it off gently  
using a commercially available cleaning cloth  
or a soft cotton cloth, starting from the  
centre of the disc and moving outward. Do  
not clean CDs with conventional record  
cleaners, anti- static formulas, or chemicals  
such as paint thinner or benzene.  
The reflective film on a CD-R or a CD-RW is  
more fragile than that on an ordinary music  
CD, and may peel off if scratched.  
Fingerprints on a CD-R or CD-RW are also  
more likely to cause skipping when the disc  
is played. For these reasons, handle the  
disc very carefully. Detailed handling  
instructions will appear on the CD-R or CD-  
RW package: read this information carefully  
before using the disc.  
Do not stick tape on either side of the CD.  
Tape  
— 6 —  
Do Not Load CD Accessories in Slot  
Do Not Use Special Shape CDs  
Do Not Use CDs with Sticker on the  
Labelled Side  
Do not use the CD with the label sticker  
stuck on it.  
Using such a CD may cause the CD to be  
deformed and the sticker to peel off,  
resulting in malfunction of the unit.  
Do not use commercially available CD  
accessories that can be loaded into the CD  
slot, such as stabilisers, protective sheets,  
or CD cleaning discs, since they can cause  
the unit to malfunction.  
Be sure to use round shape CDs only for  
this unit and do not use any special shape  
CDs. Use of special shape CDs may cause  
the unit to malfunction.  
Removing the CD  
Only remove the CD from the machine in a  
horizontal direction. You may damage the  
surface of the CD if you try pulling it down  
as it ejects.  
Be sure to use CDs with disc mark  
only for this unit.  
CD-Rs and CD-RWs which have not  
undergone finalization processing cannot be  
played. (For more information on finalization  
processing, refer to the manual for your  
CD-R/CD-RW writing software or CD-R/CD-  
RW recorder.) Additionally, depending on  
the recording status, it may prove  
impossible to play certain CDs recorded on  
CD-R or CD-RW.  
— 7 —  
General features  
KDC-PS9590R/9090R  
5
¢
Description about this indicator for these features can be displayed  
by setting the Lower Part Display (page 12) to  
"... + Function indicator."  
FM  
ANG  
SRC/  
OFF  
Egnlish  
ANG  
PTY  
DAB  
OFF  
MENU  
VOL ADJ  
AUD  
LOUD  
DISP  
NAME  
Power  
NF  
You can help prevent theft of the unit by reversing the  
faceplate so that the control panel cannot be seen, hiding the  
unit, and shutting off the audio.  
AM/  
NF  
CLK  
ATT/  
LOUD  
DISP  
Q
Power ON/OFF:  
4
5
When you turn your vehicle’s ignition on, the unit’s power will  
also turn on, with the faceplate reversing to show the control  
panel.  
KDC-PS9590R/9090R  
When you turn your vehicle's ignition off, the faceplate will  
reverse to hide the control panel after a period of time which  
you have set in the "Time setting for removing the faceplate" in  
the menu. The unit's power will turn off.  
Alternatively, you can remove the faceplate during that period.  
For details, refer to the "Removing the faceplate" (page 14).  
NOTE  
• After installation of your Mask unit, be sure to transmit the  
Mask Key's signal to deactivate the demonstration mode.  
If this procedure is not carried out, the control panel of the unit  
will re-open in two seconds even with your vehicle's ignition  
turned off.  
• When the moving faceplate is hit by an object, it will stop and  
return to its original state. Remove the object and repeat the  
action.  
LOUD indicator  
KDC-8090R  
2CAUTION  
Using the Unit in Vehicles with Covered Consoles  
• Make sure the console is uncovered whilst the faceplate is  
reversed.  
• Do not exert any excess force on the movable parts of the unit,  
including the faceplate, as it can cause failure in the unit’s  
mechanism.  
LOUD indicator  
— 8 —  
• To enable the selection of External disc control mode 2/AUX  
mode, you should connect optional switching adapter KCA-  
S210A (which allows you to select both External disc control  
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-  
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or  
switching adapter CA-C1AX (which allows you to select AUX  
mode only).  
Volume  
Increasing Volume:  
Press the button to turn up the volume.  
Decreasing Volume:  
Press the button to turn down the volume.  
During the AUX mode, "AUX" (or AUX-name display) will show  
in the display.  
When the CA-C1AX is being used, the AUX Mode will replace  
the External Disc Control Mode.  
• If you have selected Standby mode, the timer function that  
turns the power off automatically will be activated.  
To find out how to set the time on the timer, and how to cancel  
the timer function, refer to the section on the Power OFF Timer  
function under Menu settings (page 42).  
Switching Modes  
Switching Modes:  
Each time you press the SRC button, the mode switches as  
follows:  
NOTE  
Selecting AUX-name display  
Holding down the DISP button for two seconds or more during  
the AUX mode, AUX-name display is blinked for AUX-name  
selection mode.  
Tuner mode  
CD mode  
Pressing 4 or ¢ button during this mode allows you to select  
"AUX" , "TV" , "VCP" , "GAME" or "PORTABLE" in the AUX mode.  
The AUX-name selection mode can be exited by pressing the  
DISP button or doing nothing for 10 seconds.  
External disc control mode 1  
External disc control mode 2 / AUX mode  
Standby mode  
Selecting the standby mode:  
Press the SRC button repeatedly to select to "ALL OFF" .  
When "ALL OFF" is displayed, the standby mode is turned on.  
The standby mode turns all functions off although leaving the  
unit’s power on. Use this mode when you want to have the  
display illuminated but do not want to listen to anything.  
Attenuator  
This function allows you to turn down the volume quickly.  
Turning Attenuator On/Off:  
NOTE  
Press the ATT button to switch the attenuator on and off.  
When the attenuator is off, the volume returns to the original  
level.  
• The mode switches to the next mode from any mode which  
cannot be used.  
• The external disc control mode will differ depending on the unit  
that is connected.  
NOTE  
Turning the volume up, or turning it all the way down deactivates  
the attenuator function.  
— 9 —  
General features  
Loudness  
Switching Full-Screen Display  
This function amplifies low and high tones when the volume is  
This function switches the type of information on the display  
turned down.  
in the full screen display mode.  
Egnlish  
The LOUD indicator lights up, when the loudness function is  
on.  
Each time you press the CLK button, the full screen display  
changes as follows:  
Turning Loudness On/Off:  
In Source mode:  
Hold down the LOUD button for one second or more to switch  
the loudness on and off.  
Demonstration  
NOTE  
Spectrum Analyzer 1  
Spectrum Analyzer 2  
Spectrum Analyzer 3  
The loudness function does not affect non-fading pre-out.  
Spectrum Analyzer 4 (KDC-PS9590R/9090R)/  
Each source display+ Graphic (KDC-8090R)  
Faceplate Angle Adjustment  
You can adjust the faceplate angle for easy viewing.  
Sliding the faceplate:  
In Stand by mode:  
Hold down the ANG button for one second or more.  
Demonstration  
Date + Clock + Function indicator  
"ALL OFF"  
NOTE  
Please see the menu settings about selecting the display mode.  
For details refer to the Switching Display Mode page for the  
menu settings. (page 37)  
NOTE  
Do not apply excessive force to the faceplate under setting 2.  
Switching the Upper Part Display  
This function switches the type of information on the upper  
part display when the display mode is in vertical division  
display.  
— 10 —  
Each time you press the DISP button, the upper part display  
changes as follows:  
• If you try to display the name of a disc that does not have  
one, "NO NAME" is displayed instead.  
• When there is an attempt to display the title of a disc for  
which the disc title/track title has not been recorded, "NO  
TEXT" is displayed for CD and "NO TITLE/NO NAME" is  
displayed for MD.  
• If you attempt to display disc title/track title when  
connecting the CD changer not supported for CD text  
feature, caution messages such as "NO TEXT" or "Reading"  
may be displayed.  
• Depending on the type of characters of the CD Text, some  
characters may not be displayable.  
In Tuner mode:  
Programme Service name (only during RDS station reception) /  
Station frequency  
Radio text (only during RDS station reception)  
Displaying Frequencies during programme service name  
display:  
Hold down the DISP button for one second or more.  
The frequency for the RDS station will be displayed for five  
seconds instead of the station name.  
NOTE  
• Please see the menu settings about selecting the display mode.  
For details refer to the Switching Display Mode page for the  
menu settings. (page 37)  
• The same items cannot be selected for both the upper part and  
the lower part.  
NOTE  
If the RDS station currently tuned to is transmitting no text  
whilst the Radio Text Display mode is turned on, "NO TEXT"  
will appear in the display. Whilst awaiting reception, "Waiting"  
will be displayed.  
2WARNING  
To prevent accidents, drivers should not look at the display  
whilst driving.  
In CD/External disc control mode:  
Track Time  
Disc name (DNPS)(only when being preset)  
Disc Title (Units featuring CD text/MD only)  
Track Title (Units featuring CD text/MD only)  
NOTE  
• You can give names to discs through the presetting disc  
name function (page 30).  
Note that depending on the unit, display may not be  
possible.  
— 11 —  
General features  
In CD/External disc control mode:  
Switching the Lower Part Display  
This function switches the type of information on the lower  
part display when the display mode is in vertical division  
display.  
Spectrum Analyzer1  
Egnlish  
Spectrum Analyzer2 + Clock  
Each time you press the CLK button, the lower part display  
changes as follows:  
Spectrum Analyzer2 + Graphic (KDC-8090R only)  
Graphic + Clock (KDC-8090R only)  
In Tuner mode:  
Date + Function indicator (KDC-PS9590R/9090R)/  
Date (KDC-8090R)  
Spectrum Analyzer1  
Disc name (DNPS)* + Function indicator (KDC-PS9590R/9090R)/  
Disc name (DNPS)* (KDC-8090R)  
Spectrum Analyzer2 + Clock  
Spectrum Analyzer2 + Graphic (KDC-8090R only)  
Graphic + Clock (KDC-8090R only)  
Disc Title** + Function indicator (KDC-PS9590R/9090R)/  
Disc Title** (KDC-8090R)  
Track Title** + Function indicator (KDC-PS9590R/9090R)/  
Track Title** (KDC-8090R)  
Date + Function indicator (KDC-PS9590R/9090R)  
Date (KDC-8090R)  
*
(only when being preset)  
Radio text + Function indicator (KDC-PS9590R/9090R)  
Radio text (KDC-8090R)  
** (Units featuring CD text/MD only)  
(only during RDS station reception)  
NOTE  
• You can give names to discs through the presetting disc  
name function (page 30).  
NOTE  
Note that depending on the unit, display may not be  
possible.  
If the RDS station currently tuned to is transmitting no text  
whilst the Radio Text Display mode is turned on, "NO TEXT"  
will appear in the display. Whilst awaiting reception, "Waiting"  
will be displayed.  
• If you try to display the name of a disc that doesn't have  
one, "NO NAME" is displayed instead.  
• When there is an attempt to display the title of a disc for  
which the disc title/track title has not been recorded, "NO  
TEXT" is displayed for CD and "NO TITLE/NO NAME" is  
displayed for MD.  
2WARNING  
To prevent accidents, drivers should not look at the display  
whilst driving.  
• If you attempt to display disc title/track title when  
connecting the CD changer not supported for CD text  
feature, caution messages such as "NO TEXT" or "Reading"  
may be displayed.  
• Depending on the type of characters of the CD Text, some  
characters may not be displayable.  
— 12 —  
NOTE  
Speaker & Woofer setting  
• Please see the menu settings about selecting the display mode.  
For details refer to the Switching Display Mode page for the  
menu settings. (page 37)  
• The same items cannot be selected for both the upper part and  
the lower part.  
Speaker setting allows the System Q settings to be fine-tuned  
according to the type of speakers.  
Woofer setting allows for Network configuration according to  
the type of subwoofers.  
1 Press the SRC button repeatedly to select the standby mode.  
"ALL OFF" is displayed when the standby mode is selected.  
2 Press the Q button to enter the speaker setting mode.  
System Q  
3 Each time you press the FM/AM button, the mode switches as  
follows:  
You can recall the best audio setting preset for different types  
of the music.  
Speaker setting mode  
Switching the Preset Sound Setting:  
Each time you press the Q button, the preset sound setting  
switches as follows:  
Woofer setting mode (KDC-PS9590R/9090R only)  
Scan of Flat – Easy  
(Default setting)  
Easy  
Jazz  
Pops  
4 •In speaker setting mode  
Press either the 4 or ¢ button to select the type of  
speaker. The setting switches as follows.  
Off ("Speaker Setting OFF") /  
User memory*  
*User memory:  
Flat  
For 6/6x9 in. speaker ("Speaker Setting 6 9/6 inch") /  
The unit returns to the state  
adjusted the last time with  
the audio control setting feature.  
Top 40  
*
For 5/4 in. speaker ("Speaker Setting 5/4 inch") /  
Rock  
For the OEM speaker ("Speaker Setting O.E.M.")  
• In woofer setting mode  
Press either the 4 or ¢ button to select the type of Sub  
NOTE  
woofer. The setting switches as follows.  
"Woofer OFF" / "12in type A" / "10in type A" / "12in type B" /  
"10in type B" / "12in type C" / "10in type C" / "8inch" / "12in  
type D" / "10in type D"  
The System Q function changes the values of the following  
sound quality parameters:  
Bass centre frequency, bass level, bass quality factor, bass  
extend, middle centre frequency, middle level, middle quality  
factor, treble centre frequency, treble level non-fading level, high-  
pass filter frequency for front output, high-pass filter frequency  
for rear output, and low-pass filter frequency for non-fading  
output.  
5 Press the Q button to end the speaker setting mode and  
woofer setting mode.  
NOTE  
• Speaker setting function allows for tuning of bass, middle and  
treble.  
• Woofer setting allows for tuing of high-pass filter frequency,  
low-pass filter frequency and non-fading level.  
Note that some of these parameters cannot be controlled by the  
audio control setting feature. (KDC-8090R)  
Their setting values are different depending on the setting of the  
speaker and woofer setting mode.  
— 13 —  
General features  
Forced Closing  
Removing the Faceplate  
This function prevents tampering with the unit your car is  
being serviced etc.  
The faceplate can be detached from the unit, helping to deter  
theft.  
Egnlish  
Hiding the unit with the ignition turned on (forced closing):  
Hold down the SRC button for one second or more.  
The faceplate will slide open. When the period of time which  
you have set in the "Time setting for removing the faceplate" in  
the menu has passed, the faceplate automatically reverses to  
hide the control panel. However, you can remove the faceplate  
during that period. For details, refer to the "Removing the  
faceplate" (page 14).  
Removing the faceplate:  
1 Choose the way from among the following and open the  
faceplate.  
Turn the ignition off, hold down the SRC button for one second  
or more when the control panel has been hidden.  
2 Holding the centre part of the faceplate, pull it out during the  
period which you have set in the "Time setting for removing  
the faceplate" (page 38) in the menu.  
NOTE  
The faceplate bracket will automatically close.  
• When the closing faceplate is hit by an object, the unit will turn  
off without the faceplate closing all the way. Remove the object  
and press the SRC button to turn the unit back on, then turn it  
off again to make it close properly.  
• Do not try to press the buttons on the control panel as the  
faceplate is moving, as excessive force may damage the unit.  
• During the forced closing of the unit (i.e., having the unit left  
closed whilst ignition is turned on), the faceplate will not open  
no matter how often the ignition is turned on or off.  
2CAUTION  
You can prevent tampering of the unit when letting someone  
else drive your car by keeping it closed this way.  
• When removing the faceplate, pull it out only when it is fully  
open. The detachment of the faceplate whilst it is moving might  
result in damage to the unit.  
• Do not apply excessive force to the faceplate bracket without  
attaching the faceplate. Doing so will cause the faceplate  
bracket to be deformed.  
To cancel the forced closing of unit and open control panel:  
Press the left part at the upper side of the faceplate.  
The faceplate will open and show the control panel.  
• Do not touch the connector on the faceplate bracket after  
removing the faceplate. Touching the connector may cause  
damage to the unit.  
NOTE  
• The faceplate is a precision piece of equipment and can be  
damaged by shocks or jolts. For that reason, keep the faceplate  
in its special storage case whilst detached.  
• Do not expose the faceplate or its storage case to direct  
sunlight or excessive heat or humidity. Also avoid places with  
too much dust or the possibility of water splashing.  
— 14 —  
Reattaching the Faceplate:  
Function of the KDC-PS9590R/KDC-9090R  
1 Hold the faceplate so that the control panel faces the front  
toward you and set the left side of the faceplate in the  
faceplate bracket.  
Non-Fading Output  
You can turn the non-fading output on and off whilst the  
preout is switched to the non-fading preout.  
2CAUTION  
Turning non-fading output On/Off :  
Do not set the right side of the faceplate in the faceplate bracket  
first, when reattaching the faceplate. Doing so may cause the  
connector on the faceplate bracket to malfunction.  
Hold down the NF button for one second or more to set the  
function ON or OFF.  
"NF ON" is displayed when the non-fading output is set ON.  
2 Press the right side of the faceplate until it locks.  
TEL Mute  
Shut down the audio system temporarily whenever an  
incoming call is received.  
NOTE  
The function will not work if a cable is not connected to the car  
phone.  
When the telephone rings:  
When a call is received, "CALL" is displayed and all the unit  
functions are temporarily interrupted.  
Restoring Original Unit Source During Phone Call:  
Press the SRC button.  
"CALL" disappears from the display, and the volume of the  
original source is restored gradually.  
Turning TEL Mute Function Off After Phone Call:  
Hang the phone up.  
"CALL" disappears from the display.  
The original source (i.e., the one used before the phone call) is  
returned to automatically, and the volume restored gradually.  
— 15 —  
Audio control features  
Audio Control Setting  
Adjust various parameters of sound quality.  
¢
FM  
1 Hold down the AUD button for one second or more to enter  
Egnlish  
the control mode.  
ANG  
PTY  
2 Selecting mode  
DAB  
OFF  
Press either the FM or AM button.  
Each time the button is pressed, the adjustment mode will  
change.  
Please refer to the following for the contents of the  
adjustment modes.  
MENU  
VOL ADJ  
AUD  
LOUD  
DISP  
NAME  
NF  
NOTE  
Source tone memory  
AUD  
AM  
Each source (CD, MD, FM, AM, and disc changer) has its own  
memory in which to store the bass, middle, treble and N-F level  
settings. (N-F level : KDC-PS9590R/9090R only)  
4
The settings made for a particular source are then recalled  
automatically whenever you use that source (e.g., FM mode  
uses the tone settings made for FM, AM for AM, etc.).  
KDC-PS9590R/9090R  
Selecting mode  
Setting value  
3 Adjust each mode  
Press the 4/¢ button.  
Look at the table to adjust the mode being displayed.  
4 Press the AUD button to end the control mode.  
NOTE  
• Determining the parameters in the audio control setting will  
clear all the adjustments made in the System Q and they are  
replaced with the values made in the audio control setting.  
• The following parameters can be set when the System Q  
function on the menu settings is ON.  
Bass centre frequency, bass quality factor, bass extend, middle  
centre frequency, middle quality factor, and treble centre  
frequency.  
KDC-8090R  
Selecting mode  
Setting value  
— 16 —  
Bass Centre Frequency  
Middle Centre Frequency  
Adjust the centre frequency of the bass.  
Adjust the centre frequency of the middle.  
Display and setting:  
Display and setting:  
"Bass FRQ" : 60 / 70 / 80 / 100 (Only when the bass quality  
factor is set to 1.00, 1.25 or 1.50) / 150 (Only  
when the bass quality factor is set to 2.00) Hz.  
"MID FRQ" : 0.5 / 1.0 / 1.5 / 2.0 kHz.  
Middle Level  
Adjust the middle level.  
Bass Level  
Adjust the bass level.  
Display and setting:  
"MID" : - 8 – + 8  
Display and setting:  
"Bass" : - 8 – + 8  
Middle Quality Factor  
Adjust the middle quality factor.  
Bass Quality Factor  
Adjust the Bass quality factor.  
Display and setting:  
"Middle Q" : 1.0 / 2.0  
Display and setting:  
"Bass Q" : 1.00 / 1.25 / 1.50 / 2.00  
Treble Centre Frequency  
Adjust the centre frequency of the treble.  
Display and setting:  
Bass Extend  
Switch the Bass Extend mode on/off.  
"TRE FRQ" : 10.0 / 12.5 / 15.0 / 17.5 kHz  
Display and setting:  
"Bass EXT" : ON / OFF (When the bass extend mode is set to  
on, low frequency response is extended by 20%.)  
Treble Level  
Adjust the treble level.  
Display and setting:  
"TRE" : - 8 – + 8  
— 17 —  
Audio control features  
NOTE  
Balance Level  
You can separately set the high-pass filter for front and rear  
output, including preouts. The high-pass filter does not affect the  
non-fading preout.  
Adjust the balance level.  
Display and setting:  
Egnlish  
"Balance" : Left 15 – Right 15  
Function of the KDC-PS9590R/KDC-9090R  
High-pass Filter Frequency for Rear Output  
Adjust the frequency of the High-pass filter for rear output.  
Fader Level  
Adjust the fader level.  
Display and setting:  
Display and setting:  
"Fader" : Rear 15 – Front 15  
"HPF Rear" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /  
150Hz / 180Hz / 220Hz  
NOTE  
You can separately set the high-pass filter for front and rear  
output, including preouts. The high-pass filter does not affect the  
non-fading preout.  
Function of the KDC-PS9590R/KDC-9090R  
Non-Fading Level  
Adjust the Non-fading output level.  
Display and setting:  
"NF Level" : - 15 – + 15  
Function of the KDC-PS9590R/KDC-9090R  
NOTE  
Low-pass Filter Frequency for Non-Fading Output  
Adjust the frequency of the Low-pass filter for Non-Fading  
output.  
• This mode is available only when the non-fading output function  
is set to on.  
• Not available during the Dual zone system is on.  
Display and setting:  
"LPF NF" : 50 Hz / 80 Hz / 120 Hz / Through  
NOTE  
Function of the KDC-PS9590R/KDC-9090R  
High-pass Filter Frequency for Front Output  
Adjust the frequency of the High-pass filter for front output.  
• This mode is available only when the non-fading output function  
is set to on.  
• Not available during the Dual zone system is on.  
Display and setting:  
"HPF Front" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /  
150Hz / 180Hz / 220Hz  
— 18 —  
Tuner features  
Function of the KDC-PS9590R/KDC-9090R  
¢
FM  
Phase for Non-Fading Output  
Adjust the phase for Non-Fading output.  
SRC  
Display and setting:  
"NF Phase" : Normal (0°) / Reverse (180°)  
NOTE  
ANG  
PTY  
DAB  
OFF  
AUD  
• This mode is available only when the non-fading output function  
is set to on.  
• Not available during the Dual zone system is on.  
MENU  
VOL ADJ  
LOUD  
DISP  
NAME  
NF  
#1-6  
AM  
4
Volume Offset  
Set the sound level of the each source selected by adjusting  
the level difference between the basic sound level and the  
required level.  
KDC-PS9590R/9090R  
Frequency  
Preset station number  
Display and setting:  
"Volume Offset"/"VOL Offset" : - 8 –  
0
ST indicator  
Band display  
KDC-8090R  
Frequency  
Preset station number  
Band display  
ST indicator  
— 19 —  
Tuner features  
KDC-PS9590R/9090R  
Direct Access Tuning  
When you know the frequency of the station that you want to  
listen to, you can input it directly for quick access.  
(Function of remote control)  
Description about this indicator for these features can be displayed  
by setting the Lower Part Display (page 12) to  
"... + Function indicator."  
Egnlish  
1 Select the band by pressing the FM or AM button.  
2 Press the DIRECT button.  
"----" is displayed for 10 seconds.  
Tuning  
If you make no input in the 10-second period, direct access  
tuning is automatically cancelled.  
1 Press the SRC button repeatedly until the tuner mode is  
obtained. "TUNER" is displayed only when the tuner mode is  
selected.  
3 Enter the frequency of the desired station.  
If you want to listen to an FM station at 92.1 MHz, for  
example, press 0, 9, 2, and 1.  
If you want to listen to an AM station at 810 kHz, for example,  
press 0, 8, 1, and 0.  
NOTE  
2 Press either the FM or AM button to select the band.  
Each time you press the FM button, the band switches  
between the FM1, FM2 and FM3.  
Press the AM button to select the MW and LW bands.  
• You cannot enter frequencies above or below what a band can  
3 • Auto Seek Tuning  
receive.  
Press the ¢ button to seek increasing frequencies.  
Press the 4 button to seek decreasing frequencies.  
• Preset station seek tuning  
• FM frequencies can only be input in 0.1 MHz steps, and not  
0.01MHz steps.  
Press the ¢ button to move to the next preset station (i.e.,  
the one with the next highest number), and the 4 button to  
move to the last preset station (i.e., the one with the next  
lowest number).  
Cancelling Direct Access Tuning:  
Press the DIRECT button again.  
NOTE  
If the frequencies stored at the preset numbers receive  
stations which were not originally memorized when travelling  
long distances, the preset number is not displayed. In such  
cases, pressing the 4/¢ button to use preset station  
seek will receive channel 1.  
• Manual Tuning  
Press the ¢ button to increase the frequency by one step.  
Press the 4 button to decrease the frequency by one step.  
NOTE  
• The ST indicator lights up when stereo broadcasts are being  
received.  
• Please see the menu settings about selecting tuning mode.  
(page 40)  
— 20 —  
NOTE  
Station Preset Memory  
Store the frequency of the station currently being listened to.  
You can then recall that station with a single touch of a  
button.  
Changing the Displayed Band  
Pressing the FM button switches between the FM1, FM2, FM3  
and AM displays, in that order.  
Pressing the AM button switches between the displays in the  
reverse direction.  
1 Select the band/station that you want to have stored.  
2 Once the name is displayed for the station you want to  
listen to  
2 Hold down the button (#1-6) that you want to use for the  
station, for two seconds or more.  
Press the OK button.  
Reception starts of the displayed station, and the seek mode  
ends.  
The button number blinks once in the display to indicate that  
the data has been stored.  
Cancelling mode during input:  
Press the DNPP button.  
Recalling a Preset Station:  
Press the preset station button (#1-6) for the desired station.  
The number of the recalled station is displayed.  
The seek mode is cancelled.  
NOTE  
You can store 6 stations in each of the FM1, FM2, FM3, and AM  
(MW and LW) bands.  
Preset station seek with Programme service  
name  
(Function of Remote Control)  
You can search for the preset station with Programme Service  
name.  
1 Press the DNPP button on the remote control.  
"SNPP" will be displayed once the seek mode is entered.  
The names of the stations preset in the band currently listened  
to are displayed for 5 seconds each.  
The display band switches in the following order:  
= FM1 Ô FM2 Ô FM3 Ô AM +  
Each time you press the ¢ button, the station display  
switches in the forward direction.  
Each time you press the 4 button, the station display  
switches in the reverse direction.  
Stations which have no names will be displayed as  
frequencies.  
— 21 —  
RDS features  
KDC-PS9590R/9090R  
¢
FM  
Description about this indicator for these features can be displayed  
by setting the Lower Part Display (page 12) to  
"... + Function indicator."  
PTY  
Egnlish  
ANG  
PTY  
DAB  
OFF  
MENU  
VOL ADJ  
AUD  
LOUD  
DISP  
NAME  
RDS (Radio Data System)  
NF  
RDS is a digital information system that lets you receive  
signals besides those of regular radio programmes, such as  
network information being transmitted from radio stations.  
When listening to an RDS station (ie, a station with RDS  
capability), the programme service name of the station is  
displayed along with the frequency, advising you quickly  
which station is being received.  
DISP  
CLK  
#1-6  
TI/  
VOL ADJ  
AM  
4
RDS (Radio Data System) stations also transmit frequency data  
for the same station. When you are making long trips, this  
function automatically switches to the particular frequency  
with the best reception for the particular network of stations  
that you want to listen to. The data is automatically stored,  
allowing you to switch quickly to another RDS stations,  
broadcasting the same programme, that has better reception.  
These include stations stored in the station preset memory  
that you often listen to.  
KDC-PS9590R/9090R  
Programme Service name  
Radio text  
TI indicator  
Enhanced Other Network  
KDC-8090R  
Stations that offer <Enhanced Other Network> also transmit  
information about other RDS stations that have traffic  
information. When you are tuned to a station that is not  
transmitting traffic information, but another RDS station starts  
transmitting a traffic bulletin, the tuner automatically switches  
to the other station for the duration of the bulletin.  
Programme Service name  
Radio text  
TI indicator  
— 22 —  
NOTE  
Alarm  
• When you are listening to a tape or disc, you cannot change to  
another TI station.  
• When the auto TP seek function is turned on and reception  
starts to weaken, the tuner automatically seeks traffic  
information stations with better reception.  
When an emergency transmission (announcing disasters, etc.)  
is sent, all current functions are interrupted to allow the  
warning to be received.  
• If you are tuned to a station that is not a traffic information  
station itself but which provides <Enhanced Other Network>  
services, you can still have traffic information received.  
• Holding down the TI button for one second or more when the  
TI function is on in the tape or disc mode results in a change to  
the frequency display of the traffic information station for five  
seconds.  
Traffic Information Function  
You can listen to traffic information. If you are listening to  
tapes or discs, they will continue playing until a traffic bulletin  
is broadcast.  
Turning TI function On/Off:  
Press the TI button to turn the function on and off.  
When the function is on, the TI indicator is turned on.  
When none is being received, the TI indicator will blink on and  
off. When a traffic information station is being received, the TI  
indicator will turn on.  
When a traffic bulletin begins to be broadcast, "Traffic Info" will  
be displayed, and reception will begin at the preset volume.  
If you are listening to a tape or disc when a traffic bulletin  
begins, they will automatically be turned off. When the bulletin  
ends or poor reception is experienced, the tape or disc will  
begin playing again.  
Presetting Volume for Traffic Information/News  
Preset the volume level to be used for traffic information and  
news broadcasts.  
1 Tune into the station for which you want to set the volume.  
2 Adjust the volume to the desired level.  
3 Hold down the VOL ADJ button for two seconds or more.  
The volume level blinks once in the display to indicate that the  
data has been stored.  
Future traffic information/news broadcasts are heard at the  
preset level.  
NOTE  
NOTE  
Pressing the TI button whilst in the MW/LW band automatically  
switches reception to the FM band. However, the MW/LW band  
is not returned to when the TI button is pressed again.  
Switching to a Different Traffic Information Station:  
Use the 4 / ¢ buttons to make an auto seek of the TI  
stations in a certain band.  
• The volume cannot be lowered by this function during tuner  
reception. The volume is only set when it is louder than the  
listening volume of the tuner.  
• You can arrange only to listen to traffic information or news  
bulletins with at preset volume with the volume set at  
minimum.  
— 23 —  
RDS features  
24. Jazz Music  
(Jazz Music)  
Programme Type (PTY) Function  
Conduct auto seek tuning only on those stations with selected  
kinds of programmes.  
25. Country Music  
26. National Music  
27. Oldies Music  
28. Folk Music  
(Country Music)  
(National Music)  
(Oldies Music)  
(Folk Music)  
Egnlish  
1 Press the PTY button.  
29. Documentary  
(Documentary)  
"PTY Select" is displayed, and the Programme Type Selection  
(PTY) Mode entered.  
(Speech.....1~9,16~23, 29, Music.....10~15, 24~28)  
• You can select the type of programme directly by pressing a  
preset button. The buttons are factory-set to the following  
type of programmes:  
If you make no key input in 30 seconds, the mode will  
automatically turn off.  
NOTE  
1. Music  
4. Other Music  
2. Speech  
5. Serious Classical  
3. News  
6. Varied  
You cannot use this function whilst the traffic bulletin is received.  
NOTE  
Changing the Preset Button Settings for Programme Type  
2 Select the type of programme to be received  
• Press either the FM or AM button repeatedly until the type of  
programme you want to listen to.  
After selecting the type of programme to be stored in a certain  
preset button, hold down that button for two seconds or more.  
The previously stored data for that button are erased and the  
new programme type is stored.  
The selection includes:  
Speech  
(All Speech)  
(All Music)  
(News)  
Music  
1. News  
3 Seeking the selected programme type  
Press the 4 or ¢ button to make a seek of frequencies  
2. Current Affairs  
3. Information  
4. Sports  
(Current Affairs)  
(Information)  
(Sport)  
with your selected type of programme.  
The display blinks and the seek starts.  
If your selected type of programme is found, the name of the  
station is displayed and the station is tuned into.  
"PTY Found" is displayed for about 30 seconds.  
If you make no key input in 30 seconds, the PTY selection  
mode will turn off automatically.  
5. Education  
6. Drama  
(Education)  
(Drama)  
7. Culture  
(Cultures)  
8. Science  
(Science)  
9. Varied  
(Varied Speech)  
(Pop Music)  
(Rock Music)  
(Easy Listening M)  
(Light Classic M)  
(Serious Classics)  
(Other Music)  
(Weather & Metr)  
(Finance)  
NOTE  
10. Pop Music  
11. Rock Music  
12. Easy Listening Music  
13. Light Classical  
14. Serious Classical  
15. Other Music  
16. Weather  
If no programme can be found, "NO PTY" is displayed.  
If you want to select another type of programme, repeat steps 2  
and 3 above.  
Switching to Other Stations with the Same Type of  
Programme:  
When "PTY Found" is displayed, perform auto seek tuning.  
The tuner scans for another station with the same type of  
programme.  
17. Finance  
18. Children’s programmes (Children's Prog)  
19. Social Affairs  
20. Religion  
21. Phone In  
22. Travel  
(Social Affairs)  
(Religion)  
Cancelling Programme Type Function During Its Operation:  
Press the PTY button.  
(Phone In)  
(Travel & Touring)  
(Leisure & Hobby)  
23. Leisure  
— 24 —  
To scroll automatically:  
Changing Language for Programme Type(PTY)  
Function  
Changing the display language to another language.  
1 Press the DISP or CLK button to display radio text on the  
upper or lower part display.  
The text will be displayed in one scrolling display.  
2 Holding down the DISP button for one second or more with  
radio text displayed on the upper part display scrolls the text  
once.  
1 Press the PTY button.  
"PTY Select" is displayed, and the Programme Type Selection  
(PTY) Mode entered.  
NOTE  
2 Enter the Changing Language Mode  
• Please see the menu settings (page 42) about switching  
between manual scrolling and automatic scrolling.  
• You can scroll text when the vertical division display mode has  
been selected by the switching display mode function.  
For details refer to the Switching Display Mode page for the  
menu settings. (page 37)  
Press the DISP button to enter the changing language mode.  
3 Changing the Display Language  
Press the FM or AM button.  
Each time the button is pressed, the display language will  
change as follows:  
English  
Spanish  
French  
Dutch  
German  
Swedish  
Portuguese  
Norwegian  
4 Press the DISP button to end the changing language mode.  
Radio Text Scroll  
This function permits the text to be scrolled and the entire text  
to be displayed. The scrolling method differs depending on the  
setting of scrolling in the menu.  
To scroll manually:  
1 Press the DISP button to display radio text on the upper part  
display.  
2 Holding down the DISP button for one second or more results  
in one scrolling display of the text.  
— 25 —  
CD/External disc control features  
KDC-PS9590R/9090R  
¢
Description about this indicator for these features can be displayed  
by setting the Lower Part Display (page 12) to  
"... + Function indicator."  
38  
0
DISC+  
SRC  
Egnlish  
ANG  
PTY  
DAB  
OFF  
AUD  
Playing CDs  
MENU  
VOL ADJ  
LOUD  
DISP  
NAME  
NF  
Playing CDs:  
Press the 0(EJECT) button to slide open the faceplate,  
showing the CD (insertion) slot. Holding the CD with the  
labeled side facing up, insert it in the slot.  
The faceplate will close, and the CD will start playing.  
The IN indicator will light when a CD has been inserted.  
DISP/  
NAME  
CLK  
SCAN  
REP  
M.RDM  
DISC-  
4
RDM  
Playing CDs Already Inserted:  
KDC-PS9590R/9090R  
Disc number Track number  
Press the SRC button repeatedly until the CD mode is  
obtained. "CD" is displayed when the CD mode has been  
selected.  
Track time  
The CD will start playing.  
Pausing and Restarting CD Play:  
Press the 38 button to make the disc pause.  
Press the same button again to start play again.  
Eject:  
Press the 0(EJECT) button. The faceplate will slide to eject the  
Disc title/Track title/DNPS  
CD.  
IN indicator  
KDC-8090R  
Press the 0(EJECT) button to close the faceplate.  
2CAUTION  
• Do not attempt to insert a CD into the slot if another one is  
already there.  
Track number  
Track time  
• The unit can only play 12-cm (5-inch) CDs. If you insert an 8-cm  
(3-inch) CD, it will get stuck inside and can cause the unit to  
malfunction.  
• When the faceplate has been slid open, it might interfere with  
the gear lever or something else. If this happens, pay attention  
to safety and move the gear lever or take an appropriate action,  
then operate the unit.  
Disc title/Track title/DNPS  
IN indicator  
— 26 —  
NOTE  
Fast Forwarding and Reversing Disc Play  
• The sound will be temporarily muted whilst the faceplate is  
moving.  
• When you load a CD and eject it right away, the next time you  
try to insert the CD may not load. In such a situation, take the  
CD out for a moment and then reinsert it.  
Fast Forwarding Disc Play:  
Hold down on the ¢ button.  
Release your finger to play the disc at that point.  
Reversing Disc Play:  
Hold down on the 4 button.  
Release your finger to play the disc at the point.  
NOTE  
You cannot use reverse play between tracks depending on the  
model being connected. Instead, the reverse play function is  
cancelled when it reaches the beginning of a track, at which  
point normal play automatically resumes.  
Playing Other Disc mode  
This function permits the connection of optional players and  
the playing of discs other than the loaded CD (in the current  
unit).  
Playing Discs:  
Track Search  
Search forwards or backwards through the tracks on the disc  
until you reach the one that you want to listen to.  
Press the SRC button repeatedly to select the external disc  
control mode.  
The disc will start playing.  
NOTE  
Making a Reverse Track Search:  
Press the 4 button to display the desired track number.  
Press once to search back to the beginning of the current  
track, twice to search back to the beginning of the previous  
track, and so forth.  
The external disc control mode will differ, depending on the unit  
that is connected.  
Mode Display Examples  
• "CD2" ...when a CD player is connected  
• "CD-CH"/"MD-CH"/"DISC" ...when a disc changer is connected  
• "CD-CH1"/"MD-CH1"/"DISC1" , "CD-CH2"/"MD-CH2"/"DISC2"  
...when two disc changers are connected  
Play starts at the beginning of the displayed track number.  
NOTE  
(For disc changers)  
Pressing the 4 button whilst listening to track 1 only searches  
back to the beginning of that track. The reverse search is not  
"recycled" to the last track on the disc.  
Pausing and Restarting Disc Play:  
Press the 38 button to make the disc pause.  
Press the same button again to start play again.  
Making a Forward Track Search:  
NOTE  
Press the ¢ button to display the desired track number.  
Press once to fast forward to the next track, twice to fast  
forward to the track after that, and so forth.  
When one disc has finished playing its last track, the next disc in  
the changer starts playing. When the last disc in the changer has  
finished, the player returns to the first disc and starts playing it.  
Play starts at the beginning of the displayed track number.  
NOTE  
(For disc changers)  
You cannot make a forward track search when listening to the  
last track on a disc.  
— 27 —  
CD/External disc control features  
NOTE  
Disc Search  
(Function of disc changers)  
Repeat play is cancelled when you eject the disc.  
Search forwards or backwards through the discs in a disc  
changer until you reach the one that you want to listen to.  
Egnlish  
Making a Reverse Disc Search:  
Press the DISCbutton to display the desired disc number.  
Each time the button is pressed, the displayed disc number  
decreases by one.  
Track Scan  
Successively play the beginning of each track on a disc until  
you find the track that you want to listen to.  
Play starts at the beginning of the displayed disc.  
Starting the Track Scan:  
Making a Forward Disc Search:  
Press the SCAN button. "Scan ON" is displayed and the first 10  
seconds of each track are played, and the tracks are played in  
order.  
Press the DISC+ button to display the desired disc number.  
Each time the button is pressed, the displayed disc number  
increases by one.  
The track number currently being heard blinks in the display.  
Play starts at the beginning of the displayed disc.  
NOTE  
Stopping to Listen to the Track Being Scanned:  
Press the 38 or SCAN button again to stop the scan and keep  
on listening to a track normally.  
"Load" is displayed when discs are being exchanged on the disc  
changer.  
NOTE  
• The track scan function is cancelled when you eject the disc.  
• The track scan function only scans each track on a disc once.  
Track / Disc Repeat  
Repeat playing the current track or disc.  
Random Play  
Play all the tracks on the current disc in random order.  
Turning Repeat Play Function On/Off:  
Press the REP button to switch the repeat play function on and  
off as follows :  
1 Press the RDM button to switch the random play function on  
and off.  
Track Repeat ON  
"Random ON" is displayed when random play is turned on.  
The display of the track number changes continuously as the  
next track is being selected.  
Disc Repeat ON (Function of disc changers)  
When the track has been selected, play starts.  
The selected track number blinks in the display as it is being  
played.  
Repeat OFF  
"Track Repeat ON"/"Repeat ON" is displayed and the track  
number blinks in the display when track repeat is on.  
"Disc Repeat ON" is displayed and the disc number blinks in  
the display when disc repeat is on.  
NOTE  
(For disc changers)  
When all the tracks on a certain disc have been played using the  
random play function, the next disc on the changer starts playing  
(with the random play function still turned on).  
— 28 —  
2 To change the track being heard, press the ¢ button.  
2 Holding down the DISP button for one second or more results  
Another track is selected and played.  
in one scrolling display of the titles.  
NOTE  
To scroll automatically:  
1 Press the DISP or CLK button to display the disc or track title  
Random play is cancelled when you eject the disc.  
on the upper or lower part display.  
The titles will be displayed in one scrolling display.  
NOTE  
When the disc or track to be played changes, the title is  
displayed in one scrolling display.  
Magazine Random Play  
(Function of disc changers)  
Play the tracks on all the discs in the disc changer in random  
2 Holding down the DISP button for one second or more with  
the disc or track title displayed on the upper part display scrolls  
the title once.  
order.  
1 Press the M.RDM button to switch the magazine random play  
function on and off.  
NOTE  
"M.Random ON" is displayed when magazine random play is  
turned on.  
• Please see the menu settings (page 42) about switching  
between manual scrolling and automatic scrolling.  
• You can scroll text when the vertical division display mode has  
been selected by the switching display mode function.  
For details refer to the Switching Display Mode page for the  
menu settings. (page 37)  
The display of the disc and track numbers change continuously  
as the next track is being selected.  
When the disc/track has been selected, play starts.  
The selected disc/track number blinks in the display as it is  
being played.  
2 To change the track being heard, press the ¢ button.  
Another disc/track is selected and played.  
NOTE  
• Magazine random play is cancelled when you eject the disc.  
• The time needed for random selection depends on the number  
of discs loaded in the disc magazine.  
Text Scroll  
This function permits the text to be scrolled and the entire text  
to be displayed. The scrolling method differs depending on the  
setting of scrolling in the menu.  
To scroll manually:  
1 Press the DISP button to display the disc or track title on the  
upper part display.  
— 29 —  
CD/External disc control features  
NOTE  
Presetting Disc Names (DNPS)  
Direct Alphabet Input  
Store the names of discs to be displayed when played.  
(Function of remote control with number/letter entry buttons)  
If the disc changers that were manufactured and sold after 1997  
(except for KDC-C560) are connected, you can directly input  
letters using the number/letter entry buttons on the remote  
control.  
1 Play the disc whose name you want to preset.  
NOTE  
Egnlish  
• This function is not available for disc changers that do not  
feature the Disc Name Preset function.  
Example: Use the following table to enter the name "DANCE".  
• The Disc Name Preset function cannot be used during the  
Magazine random play as well as whilst a disc title or track title  
is displayed.  
Character  
Button to press  
# Times pressed  
#3  
#2  
#6  
#2  
#3  
1
1
2
3
2
“D”  
“A”  
“N”  
“C”  
“E”  
2 Hold down the NAME button for two seconds or more.  
"NAME SET" is displayed and the disc name preset mode is  
entered.  
The cursor blinks in the position where character input can be  
made.  
3 Press either the 4 or ¢ button to move the cursor to the  
desired position.  
5 Continue steps 3 and 4 until all the characters are chosen for  
The 4 button moves the cursor to the left, and the ¢  
the name.  
NOTE  
button to the right.  
You can also move the cursor left or right by pressing the 4  
or ¢ buttons, respectively, on the remote control.  
You can enter up to 12 characters for each name.  
4 Each press of the 38 button results in the type of characters  
that are to be entered changing between alphabet and  
numerals/symbols.  
6 Press either the NAME button on the main unit or the OK  
button on the remote control.  
The disc name is stored and the disc name preset mode is  
cancelled.  
Press the DISC+ or DISCbutton to display the desired  
character.  
If you make no entry in a 10-second period, the name will be  
stored with the characters input so far.  
Characters that can be displayed are as follows.  
NOTE  
Alphabet (upper case): A ~ Z  
• The number of discs whose names can be stored will differ  
depending on the disc changer that is connected. Please see  
your disc changer manual for details.  
Alphabet (lower case): a ~ z  
Up to 30 CDs can be registered with this unit.  
Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ]  
• Discs are identified by their total length and number of tracks. If  
another disc happens to have the same specifications as one  
that you have already stored a name for, the name will be  
displayed for it, too.  
Special characters: á  
à
ä
é
è
í
ì
ó
ò
ú
ù
Ñ
î
ê
ï
ë
ô
ö
û
ü
ñ
ç
©
â
— 30 —  
• If you want to change the name of a disc, repeat steps 1 and 2  
to display the name, and then repeat steps 3 and 4 to input the  
changes.  
• Pressing the reset button erases the disc names stored in this  
unit, but does not erase the names stored in a disc changer.  
Direct Disc Search  
(Function of disc changers with remote control)  
Using the remote control, make direct input of the disc  
number that you want to listen to.  
1 Using the numeric buttons on the remote control, enter the  
number of the disc that you want to listen to.  
The selected disc number blinks in the display for 10 seconds.  
If you make no further input in the 10-second period, the  
number entry mode will automatically be cancelled.  
Direct Track Search  
(Function of remote control)  
NOTE  
Using the remote control, make direct input of the track  
• Input "0" to select disc #10.  
number that you want to listen to.  
• If you enter more than two numbers all at once, a search will  
be made only of the last number entered.  
• You cannot use the direct disc search function during random  
play or magazine random play.  
1 Using the numeric buttons on the remote control, enter the  
number of the track that you want to listen to.  
The selected track number blinks in the display for 10 seconds.  
If you make no further input in the 10-second period, the  
number entry mode will automatically be cancelled.  
2 Press either the DISC+ or DISCbutton whilst the number  
inputted is blinking.  
The disc specified in step 1 starts playing.  
2 Press either the 4 or ¢ button whilst the track number is  
blinking.  
Cancelling Direct Disc Search During Its Operation:  
Press the 38 button.  
The track specified in step 1 starts playing.  
Cancelling Direct Track Search During Its Operation:  
Press the 38 button.  
NOTE  
You cannot use the direct track search function during random or  
magazine-random play.  
— 31 —  
CD/External disc control features  
To cancel DNPP mode:  
Disc Name Preset Play (DNPP)  
Press the DNPP button.  
(Function of Remote Control)  
The disc name preset play (DNPP) mode will be cancelled.  
If you have preset the name of a disc that you want to listen to  
in the disc changer, you can look for it by name and start  
playing it.  
Egnlish  
1 Press the DNPP button on the remote control.  
"DNPP" will appear in the display, and the disc name preset  
play mode is entered.  
The names of all the discs in the disc changer will appear  
successively in the display for five seconds each.  
Discs whose names have not been preset will appear as "NO  
NAME" in the display.  
NOTE  
• This function can only be used in disc changers that were  
manufactured or sold as of 1997. Also note that some units  
cannot provide a display unless the disc name preset has been  
made by the unit that is playing.  
• Discs in the disc changer that have never been played before  
will appear as "NO ACCESS" when the disc names are  
displayed. When you cannot identify a disc because of the "NO  
ACCESS" display after inserting a disc magazine, try playing it to  
display the disc name.  
Also note that "NO DISC" will be displayed when a disc has not  
been loaded.  
Rapid display (forward / reverse):  
Press the DISC+ or DISCbutton.  
Pressing the DISC+ button will rapidly display the preset  
names/disc titles in order.  
Pressing the DISCbutton will rapidly display the preset  
names/disc titles in reverse order.  
2 When the name appears for the disc you want to play  
Press the OK button.  
The disc whose name is displayed will be recalled, and the disc  
name preset play (DNPP) mode will end.  
— 32 —  
Menu settings  
KDC-PS9590R/9090R  
Signal sensor  
¢
Description about this indicator for these features can be displayed  
by setting the Lower Part Display (page 12) to  
"... + Function indicator."  
FM  
SRC  
38  
Menu System  
You can set the defaults for additional functions in the menu  
mode. Make a setting for each function, referring to the  
following operations.  
AUTO  
1 Enter the menu mode  
Hold down the MENU button for one second or more.  
"MENU" is displayed when the menu mode is entered.  
The function that you can adjust is indicated with the current  
settings displayed.  
DISP  
MENU  
AM  
#1-6  
4
KDC-PS9590R/9090R  
2 Selecting function to set  
Press the FM button to search through the functions until you  
see the one you want to adjust in the display.  
Press the AM button to search through the functions  
backward.  
Function items change in the order of features that follow in  
the menu system.  
Menu display  
Example: If you want to switch the setting of the touch sensor  
tone function from on to off, first search through the  
functions until you see "Beep ON" in the display.  
NEWS indicator  
RDS indicator  
3 Changing setting for currently displayed function  
Press either the 4 or ¢ button.  
KDC-8090R  
The setting will change for each function.  
Example: The setting of the touch sensor tone will switch from  
on to off, and "Beep OFF" is displayed.  
Menu display  
4 Ending the menu mode  
Press the MENU button.  
NOTE  
Make sure to end the menu mode when finished.  
If you fail to end the menu mode, several functions may not  
operate properly, including the Traffic Information function, the  
News Bulletin function with PTY news timeout setting, and the  
Alarm function.  
RDS indicator  
NEWS indicator  
AUTO indicator  
— 33 —  
Menu settings  
• If the Mask Key’s signal does not be received correctly, the  
Function of the KDC-PS9590R/KDC-9090R  
display will return to "BAR BAR  
procedure in step 4.  
1" . In this case, repeat the  
Mask Key <In Stand by mode>  
If you have transmitted the Mask Key's signal once to the unit  
in advance, you will have to transmit it once again if the unit  
has been removed from the battery. This function helps  
prevent theft.  
5 Hold down the transmit button on the Mask key until "BAR  
Egnlish  
BAR BAR" is displayed.  
If you press the RESET button or remove the battery:  
The first time you turn the unit on again, "BAR BAR  
appear in the display, indicating the setting mode has been  
entered. Repeat steps 4 and 5 above, and transmit the signal.  
You can start operating the unit again when "BAR BAR BAR"  
appears in the display.  
1" will  
When using the unit for the first time:  
In order to deactivate the demonstration mode, be sure to  
press the transmit button to transmit the Mask Key's signal.  
If this procedure is not carried out, the control panel of the unit  
will re-open in two seconds even with your vehicle's ignition  
turned off.  
1 Press the SRC button repeatedly to select the standby mode.  
Function of the KDC-8090R  
"ALL OFF" is displayed when the standby mode is selected.  
Mask Key <In Stand by mode>  
2 Hold down the MENU button for one second or more.  
"MENU" is displayed and "Mask key" appears in the display.  
If you have transmitted the Mask Key's signal once to the unit  
in advance, you will have to transmit it once again if the unit  
has been removed from the battery. This function helps  
prevent theft.  
3 Hold down either the 4 or ¢ button for one second or  
more.  
"BAR BAR  
1" will appear in the display, indicating the  
setting mode has been entered.  
When using the unit for the first time:  
In order to deactivate the demonstration mode, be sure to  
press the transmit button to transmit the Mask Key's signal.  
If this procedure is not carried out, the control panel of the unit  
will re-open in two seconds even with your vehicle's ignition  
turned off.  
4 Hold down the transmit button on the Mask key until "BAR  
BAR BAR" is displayed.  
"BAR BAR  
2" will be displayed.  
1 Press the SRC button repeatedly to select the standby mode.  
Transmission part  
Transmit button  
"ALL OFF" is displayed when the standby mode is selected.  
2 Hold down the MENU button for one second or more.  
"MENU" is displayed first and then "Mask key" is displayed.  
3 Hold down either the 4 or ¢ button for one second or  
more.  
"TRANSMIT 1" will appear in the display, indicating the setting  
mode has been entered.  
NOTE  
4 Hold down the transmit button on the Mask key until the full  
transmit level indicator lights up in the display.  
"TRANSMIT 2" will be displayed.  
• Keep the Mask Key close to the signal sensor when you  
transmit the Mask Key’s signal.  
— 34 —  
Manual Time Adjustment  
Adjust the time manually.  
Transmission part  
Transmit button  
NOTE  
This adjustment is available only when the automatic time  
adjustment is set to off. (page 37)  
Display and setting:  
1 Select the display "Clock Adjust" during the selecting function  
in the menu system.  
NOTE  
2 Hold down either the 4 or ¢ button for one second or  
more to enter the Manual time adjustment mode.  
The time display will blink.  
• Keep the Mask Key close to the signal sensor when you  
transmit the Mask Key’s signal.  
• If the Mask Key’s signal does not be received correctly, the  
display will return to "TRANSMIT 1" . In this case, repeat the  
procedure in step 4.  
3 • Adjusting the hours  
Press the FM button to advance the hours, or press the AM  
button to make the hours go back.  
• Adjusting the minutes  
5 Hold down the transmit button on the Mask key again until the  
full transmit level indicator lights up in the display.  
"APPROVED" will appear in the display, with the Mask key  
function turning on.  
Press the ¢ button to advance the minutes, or press the  
4 button to make the minutes go back.  
4 Press the MENU button to end the Manual Time Adjustment  
mode.  
If you press the RESET button or remove the battery:  
The first time you turn the unit on again, "TRANSMIT 1" will  
appear in the display, indicating the setting mode has been  
entered. Repeat steps 4 and 5 above, and transmit the signal.  
You can start operating the unit again when "APPROVED"  
appears in the display.  
Exiting the Manual Time Adjustment mode would start the  
clock counting.  
Touch Sensor Tone  
This function produces a beep sound that accompanies button  
operation. It can be switched on or off.  
Display and setting:  
"Beep ON" : Beep setting is on. (Default setting)  
"Beep OFF" : Beep setting is off.  
NOTE  
The beep sound is not output from the preout jacks.  
— 35 —  
Menu settings  
Calendar Adjustment  
Memo Mode  
Adjust the date for the unit so that you can use the calendar  
function.  
You can input the text to be displayed and set the date when  
that text will appear in the display with the calendar function.  
Egnlish  
Display and setting:  
Display and setting:  
1 Select the display "Date Adjust" during the selecting function in  
1 Select the display "Memo Mode" during the selecting function  
the menu system.  
in the menu mode.  
2 Hold down either the 4 or ¢ button for one second or  
more to enter the Calendar adjustment mode.  
The date display will blink.  
2 Hold down either the 4 or ¢ button for one second or  
more to enter the Memo mode.  
The date display will blink.  
3 Selecting the item (day, month, or year) to adjust  
Press the 4 or ¢ button.  
3 Selecting the set of the date and text to be displayed  
Press the FM and AM button.  
The item blinking in the display can be adjusted.  
If you want to input a new text, select the blank display.  
4 Adjusting the date  
4 Entering the month or day setting mode  
Press the 4 and ¢ button to enter the month or day  
setting mode.  
Press the FM or AM button.  
The item of the date blinking in the display will change.  
The month display will blink enter the month setting mode, the  
day display will blink enter the day setting mode.  
5 Press the MENU button to end the Calendar Adjustment  
mode.  
5 Changing the month or day  
Press the FM and AM button.  
6 Entering the text input mode  
Press the ¢ button to enter the text input mode.  
The cursor blinks in the position where character input can be  
made.  
Calendar Mode  
You can set the date formats of the calendar function.  
7 Inputting / Changing the text  
• Moving the cursor  
Display and setting:  
1 Select the display "Date Mode" during the selecting function in  
Press the 4 and ¢ button.  
• Changing the type of characters  
Press the 38 button.  
the menu system.  
2 Press the 4 and ¢ button to select the date format you  
want to show in the display.  
Each time the button is pressed, the type of characters  
switches as follows.  
The sample of the date format for today is displayed.  
— 36 —  
Adjusting Time Automatically:  
Tune into an RDS station for 3 or 4 minutes.  
The time adjusts automatically to the correct local time.  
Alphabet (upper case): A ~ Z  
NOTE  
Alphabet (lower case): a ~ z  
The time is not adjusted when the RDS station you are tuned to  
is not transmitting a time signal. Choose another RDS station in  
such a case.  
Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ]  
Special characters: á  
à
ä
é
è
í
ì
ó
ò
ú
ù
Ñ
î
ê
ï
ë
ô
ö
û
ü
ñ
ç
©
â
• Selecting the character  
Press the FM and AM button.  
Selectable Illumination  
You can switch the colour of the button illumination between  
green and red.  
8 Press the MENU button to end the Memo Mode.  
NOTE  
• The text you selected automatically appears on the date you set  
when the unit’s power is first turned on. (Calendar function)  
Pressing the DISP button for one second or more scrolls the  
display once, regardless of the text scroll setting.  
Pressing a button other than the DISP button will cause the text  
to disappear from the display.  
Display and setting:  
"Button Color Green"/"Button Green" :  
The colour of the illumination is green.  
"Button Color Red"/"Button Red" :  
The colour of the illumination is red.  
• You can enter up to 32 characters for each text.  
• The calendar function can be set up to 30 cases.  
• To delete the date and text setting, set both the month and day  
of the date to "00" or set all of the text to blanks.  
Switching Display Mode  
You can select the display mode of this unit.  
Display and setting:  
"Display Type A" : Divide the display into the upper and lower  
parts to separately provide different  
information. (Vertical division display)  
(page 10/11/12) (Default setting)  
Function of the KDC-PS9590R/KDC-9090R  
Automatic Time Adjustment  
With automatic time adjustment, you can set the clock time  
automatically according to time data sent from RDS stations  
(after receiving RDS signals for several minutes). You can also  
set the time manually if the automatic time adjustment  
function is turned off.  
"Display Type B" : The display will turn on by using only the  
upper part of the display and clock.  
"Display Type C" : Use the entire display to provide a single  
type of information. (Full screen display)  
(page 10)  
Display and setting:  
"SYNC ON" : Automatic time adjustment (Default setting)  
"SYNC OFF" : Manual time adjustment  
— 37 —  
Menu settings  
Function of the KDC-PS9590R/KDC-9090R  
Dimmer  
You can dim the display.  
Icon/Spectrum analyzer Select  
This function permits switching of the spectrum analyzer  
NOTE  
display.  
Egnlish  
The dimmer function is not available for units if the dimmer cable  
is not connected.  
Display and setting:  
1 Select the display "Icon/Speana Select" during the selecting  
Display and setting:  
function in the menu system.  
"Dimmer ON" : The dimmer setting is on. (Default setting)  
"Dimmer OFF" : The dimmer setting is off.  
2 Pressing the 4 or ¢ button switches the Icon/Spectrum  
analyzer.  
Time setting for removing the faceplate  
You can set the interval during which the open control panel  
cannot reverse to be hidden. During the period you have set,  
the faceplate can be removed from the faceplate bracket.  
Function of the KDC-PS9590R/KDC-9090R  
Font Select  
You can change the font used on the display.  
Display and setting:  
Display and setting:  
1 Select the display "Font Select" during the selecting function in  
"Off Wait" : 0sec / 3sec (Default setting) / 5sec / 10sec / 15sec  
/ 20sec / 25sec (sec=seconds)  
the menu system.  
2 Pressing the 4 or ¢ button switches the font on the  
display.  
System Q  
When this system is set to on, the System Q factors (Bass  
centre frequency, Bass quality factor, Bass extend, Middle  
centre frequency, Middle quality factor, and Treble centre  
frequency) appear during the audio control mode.  
Function of the KDC-8090R  
Brightness level adjustment  
You can adjust the brightness level of the unit separately  
when your car's light switch has been turned on or off.  
Display and setting:  
Display and setting:  
"System Q ON" : The System Q factors appear and can be  
adjusted. (Default setting)  
"Bright 0" – "Bright 10"  
"System Q OFF" : The System Q factors do not appear.  
NOTE  
The initial setting value whilst your car's light switch is turned on  
is "5" , and whilst the light is turned off is "10".  
— 38 —  
Function of the KDC-PS9590R  
NOTE  
Built-in Amp Mute Control <In Stand by mode>  
Toggles on or off the mute control on the built-in amplifier.  
Turning on this control enhances the preout quality.  
• You must purchase the optional KCA-S210A/CA-C1AX/KDC-  
CPS82/KDC-CX82/KDC-CPS85/KDC-CX85/KDC-CPS87/KDC-  
CX87 device before you can use this function.  
• You can choose to send the AUX input through the rear  
channel, and the unit’s tuner or audio source through the front  
channel.  
Display and setting:  
"Builtin AMP Mute ON" : Built-in Amp Mute is ON.  
"Builtin AMP Mute OFF" : Built-in Amp Mute is OFF. (Default  
setting)  
• The Bass, Middle, Treble and Loudness adjustments do not  
affect the rear channel.  
• When the Dual zone system is turned on, the External disc  
control features cannot be used.  
• When you set the Dual zone system to on whilst the non-fading  
preout is switched on, the sound of the non-fading preout does  
not be outputted.  
Function of the KDC-9090R  
Switching preout  
Switch the preout between the rear and non-fading. When you  
switch to non-fading, you can adjust the volume separately.  
Display and setting:  
External Amp Control  
Adjust the bass boost level of the external amplifier using the  
main unit.  
"SWPRE Rear" : Rear preout (Default setting)  
"SWPRE N-Fad" : Non-fading preout  
NOTE  
You cannot use the high-pass filter with non-fading preout.  
Display and setting:  
"AMP Bass Flat" : Bass boost level is flat. (Default setting)  
"AMP Bass +6" : Bass boost level is low (+6dB).  
"AMP Bass +12" : Bass boost level is high (+12dB).  
NOTE  
Dual Zone System <In AUX mode>  
As of December 2000, the power amplifiers controllable by the  
main unit are as follows:  
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T  
The following operation allows separate sound sources to  
control the output of the front and rear speakers. The Dual  
zone system can only be switched on or off when the source is  
set to the AUX mode.  
Display and setting:  
"Zone 2 ON" : The dual zone system function is on.  
"Zone 2 OFF" : The dual zone system function is off. (Default  
setting)  
— 39 —  
Menu settings  
Selecting Tuning Mode <In Tuner mode>  
You can choose from three tuning modes: auto seek, preset  
station seek, and manual.  
The AUTO 1 indicator lights up when auto seek tuning is  
selected, and the AUTO 2 indicator lights when preset station  
seek tuning is selected. (KDC-8090R)  
News Bulletin Function with PTY News Timeout  
Setting  
You can arrange to have news bulletins interrupt your current  
listening source, including other radio stations. When the  
News Bulletin function is on, the PTY News Timeout setting  
allows you to set the interval during which further news  
interruption cannot take place. You can adjust the PTY news  
interruption period from 10 to 90 minutes for each journey.  
Egnlish  
Display and setting:  
"Seek Mode Auto 1" : Auto seek tuning mode (Default setting)  
"Seek Mode Auto 2" : Preset station seek tuning mode  
"Seek Mode Manual" : Manual tuning mode  
Display and setting:  
"News OFF" (Default setting) , "News 00min" - "News 90min"  
(min= minutes)  
: When you select the news interruption timeout interval, the  
News function turns on and the NEWS indicator lights up.  
When a news bulletin is received, "NEWS" will be displayed  
and reception will begin at the preset volume.  
Auto Memory Entry <In Tuner mode>  
You can automatically store all the receivable frequencies in  
the band currently being listened to, and then recall them with  
the touch of a button later. This function is especially useful  
when you are travelling and do not know what stations are  
available. Up to 6 frequencies can be stored this way.  
NOTE  
• If you choose the "20min" setting, further news bulletins will not  
be received for 20 minutes once the first news bulletin is  
received.  
• This function is only available if the desired station sends PTY-  
code for news bulletin or belongs to <Enhanced Other  
Network>-Network sending PTY-code for news bulletin.  
• If you turn on the news bulletin function in the MW/LW band,  
the band is switched automatically to the FM band.  
However, the MW/LW band is not returned to when you turn  
off the function.  
Display and setting:  
1 Select the display "Auto-Memory" during the selecting function  
in the menu system.  
2 Hold down either the 4 or ¢ button for two seconds or  
more to start auto memory function.  
The numbers of the preset station buttons showed in order.  
When all the stations in a certain band are stored in the preset  
memory, the auto memory entry stops. The tuner then plays  
the last station received.  
NOTE  
Local Seek Function <In Tuner mode>  
With the local seek function turned on, auto seek tuning skips  
stations with relatively poor reception.  
• When the AF function is turned on whilst auto memory entry  
takes place, only RDS stations (i.e., stations with RDS  
capability) are stored. RDS stations that have been preset for  
FM1 cannot also be preset in FM2 or FM3.  
• When the local seek function is turned whilst auto memory  
entry takes place, stations with poor reception are not stored.  
• When the Traffic Information function is on, only the local traffic  
information station frequency will be stored.  
Display and setting:  
"Local.S ON" : The local seek function is on.  
"Local.S OFF" : The local seek function is off. (Default setting)  
— 40 —  
Cancelling Auto Memory Entry During Its Operation:  
Press the 4 / ¢ button whilst auto memory entry is taking  
place to stop the process.  
NOTE  
Sometimes stations in the same network broadcast different  
programmes or use different programme service names.  
Recalling a Preset Station:  
Press the preset station button (#1-6) for the desired station.  
The number of the recalled station is displayed.  
Auto TP Seek Function  
When the TI function is on and poor reception conditions are  
experienced when listening to a traffic information station,  
another traffic information station with better reception will be  
searched for automatically. This function is on, when unit is  
first powered on.  
AF (Alternative Frequency) Function  
When poor reception is experienced, automatically switch to  
another frequency broadcasting the same programme in the  
same RDS network with better reception.  
Display and setting:  
The RDS indicator lights up when the AF function is turned on.  
"ATPS ON" : The Auto TP Seek Function is on.  
If the traffic information station you are tuned to  
experiences poor reception, this function  
automatically seeks another TP station. (Default  
setting)  
Display and setting:  
"AF ON" : The AF function is on. (Default setting)  
"AF OFF" : The AF function is off.  
NOTE  
"ATPS OFF" : The Auto TP Seek Function is off.  
When no other stations with stronger reception are available for  
the same programme in the RDS network, you may hear the  
incoming broadcast in bits and snatches. Turn off the AF function  
in such a case.  
Monaural Reception  
<In FM reception of Tuner mode>  
When poor stereo reception is experienced, this function will  
reduce noise and improve listening conditions.  
Restricting RDS Region (Region Restrict Function)  
You can choose whether or not to restrict the RDS channels,  
received with the AF function for a particular network, to a  
specific region. When the Region Restrict Function is on, the  
region is restricted.  
Display and setting:  
"MONO ON" : The monaural reception is on.  
"MONO OFF" : The monaural reception is off. (Default setting)  
Display and setting:  
"Regional ON" : The Region Restrict Function is on. (Default  
setting)  
"Regional OFF" : The Region Restrict Function is off.  
— 41 —  
Menu settings  
Basic Operations of remote control  
Text Scroll  
This function permits the CD text, MD title, Radio text, and  
Calender function to be scrolled and the entire text to be  
displayed. Switching between manual scrolling and automatic  
scrolling is permitted.  
Egnlish  
Display and setting:  
"Scroll Auto" : Automatic scrolling  
"Scroll Manual" : Manual scrolling (Default setting)  
Power OFF Timer  
Set the time for the OFF Timer function activated when you  
selected Standby mode.  
If the predefined time elapses, this unit's power is  
automatically turned off.  
Display and setting:  
"OFF – – – –" : Power OFF Timer function is cancelled.  
"OFF 20min" : Unit's power goes OFF after 20 minutes.  
(Default setting)  
"OFF 40min" : Unit's power goes OFF after 40 minutes.  
"OFF 60min" : Unit's power goes OFF after 60 minutes.  
— 42 —  
2CAUTION  
Do not set the remote control on hot places such as above the  
dashboard.  
Tuner mode  
CD mode  
Loading and Replacing the Batteries:  
Use one lithium battery (CR2025).  
External disc control mode 1  
Remove the case following the instructions as illustrated.  
External disc control mode 2 / AUX mode  
Standby mode  
Keep on slide  
1
NOTE  
• The mode switches to the next mode from any mode which  
cannot be used.  
• The external disc control mode will differ depending on the unit  
that is connected.  
2
Pull out  
• To enable the selection of External disc control mode 2/AUX  
mode, you should connect optional switching adapter KCA-  
S210A (which allows you to select both External disc control  
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-  
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or  
switching adapter CA-C1AX (which allows you to select AUX  
mode only).  
Insert the batteries with the + and poles aligned properly,  
following the illustration inside the case.  
2WARNING  
Store unused batteries out of the reach of children. Contact a  
doctor immediately if the battery is accidentally swallowed.  
During the AUX mode, "AUX" (or AUX-name display) will show  
in the display.  
When the CA-C1AX is being used, the AUX Mode will replace  
the External Disc Control Mode.  
• If you have selected Standby mode, the timer function that  
turns the power off automatically will be activated.  
To find out how to set the time on the timer, and how to cancel  
the timer function, refer to the section on the Power OFF Timer  
function under Menu settings (page 42).  
Basic operations  
• VOL buttons  
Press the 5 button to turn the volume up.  
Press the button to turn the volume down.  
• SRC button  
• ATT button  
Each time you press the SRC button, the mode switches as  
follows:  
Turns down the volume quickly. To return the volume to its  
original level, press the button again. Turning the volume up, or  
turning it all the way down deactivates the attenuator function.  
— 43 —  
Basic Operations of remote control  
38 button  
Tuner features  
When a disc is playing, this button pauses the play.  
Press the same button again to start play again.  
Selects the type of characters at the time of entering the disc  
name.  
4/¢ buttons  
Press the 4 button to make decreasing seeks (using the  
preset tuning mode).  
Egnlish  
Press the ¢ button to make increasing seeks (using the preset  
• OK button  
tuning mode).  
During disc name input, stores the already input data in memory  
and ends the input mode.  
Selects disc during the disc name preset play mode.  
• AM/FM buttons  
Press the AM button to select the MW and LW bands.  
Press the FM button to select and switch between FM1, FM2,  
and FM3 bands.  
• DNPP button (for disc changers)  
Enters and cancels the Disc Name Preset Play mode.  
• DIRECT/OK button  
• Number / letter entry buttons  
During Preset station seek with programme service name mode,  
selects station.  
Used to specify the track (disc) number used in direct track  
(disc) searches.  
Enters and cancels the Direct access tuning mode.  
Use to enter letters during disc name preset.  
• DNPP button  
Enters and cancels the Preset station seek with programme  
service name mode.  
38 button  
Enters and cancels the Programme Type Selection (PTY) mode.  
• Number/letter entry buttons  
Press buttons #1-6 to recall preset stations.  
Use to enter frequency of the desired station during Direct  
access tuning mode.  
CD/External disc control features  
4/¢ buttons  
Press the 4 button to search through the tracks backwards.  
Press the ¢ button to search through the tracks forwards.  
Used to move the cursor whilst entering disc name.  
• DISC buttons (for disc changers)  
Press the DISCbutton to search through the discs backwards.  
Press the DISC+ button to search through the discs forwards.  
Selects numbers and symbols whilst entering disc name.  
— 44 —  
Accessories  
2CAUTION  
• If your car is not prepared for this special connection-system,  
consult your KENWOOD dealer.  
External view  
External view  
......... Number of items  
......... Number of items  
• Only use antenna conversion adapters (ISO-JASO) when the  
antenna cord has an ISO plug.  
• Make sure that all cable connections are securely made by  
inserting jacks until they lock completely.  
1
2
3
4
5
• If your vehicle's ignition does not have an ACC position, or if  
the ignition cable is connected to a power source with constant  
voltage such as a battery cable, the power will not be linked  
with the ignition (i.e., it will not turn on and off along with the  
ignition). If you want to link the unit's power with the ignition,  
connect the ignition cable to a power source that can be turned  
on and off with the ignition key.  
.........1  
.........2  
.........1  
.........1  
• If the fuse blows, first make sure that the cables have not  
caused a short circuit, then replace the old fuse with one with  
the same rating.  
.........1  
• Do not let unconnected cables or terminals touch metal on the  
car or anything else conducting electricity. To prevent short  
circuits, also do not remove the caps on the ends of the  
unconnected cables or the terminals.  
• Connect the speaker cables correctly to the terminals to which  
they correspond. The unit may receive damage or fail to work if  
you share the - cables and/or ground them to any metal part  
in the car.  
• After the unit is installed, check whether the brake lamps,  
indicators, wipers, etc. on the car are working properly.  
• Insulate unconnected cables with vinyl tape or other similar  
material.  
• Some disc changers need conversion cables for connection.  
See the section on "Safety Precautions" for details.  
• If the console has a lid, make sure to install the unit so that the  
faceplate does not hit the lid when closing and opening.  
• Mount the unit so that the mounting angle is 30° or less.  
2CAUTION  
The use of any accessories except for those provided might  
result in damage to the unit. Make sure only to use the  
accessories shipped with the unit, as shown above.  
Installation Procedure  
1. To prevent short circuits, remove the key from the ignition and  
disconnect the -terminal of the battery.  
2. Make the proper input and output cable connections for each  
unit.  
3. Connect the cable on the wiring harness.  
4. Take Connector B on the wiring harness and connect it to the  
speaker connector in your vehicle.  
5. Take Connector A on the wiring harness and connect it to the  
external power connector on your vehicle.  
6. Connect the wiring harness connector to the unit.  
7. Install the unit in your car.  
8. Reconnect the - terminal of the battery.  
9. Press the left part at the upper side of the faceplate once to  
make the faceplate control panel appear.  
— 45 —  
Connecting Cables to Terminals  
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)  
Rear right output (Red)/  
Non-fading right output (Red) (KDC-9090R only)  
Antenna Cord (ISO)  
Connector Function Guide  
FM/AM  
antenna input  
Rear left output (White)/  
Non-fading left output (White) (KDC-9090R only)  
Pin Numbers for  
Cable Colour  
Functions  
ISO Connectors  
Non-fading right output (Red) (KDC-PS9590R only)  
Egnlish  
External Power  
Non-fading left output (White) (KDC-PS9590R only)  
Front right output (Red)  
Connector  
A–4  
A–5  
A–6  
A–7  
A–8  
Yellow  
Blue/White  
Orange/White Dimmer  
Red  
Battery  
Power Control  
Front left output (White)  
Ignition (ACC)  
Earth (Ground)  
Connection  
To KENWOOD disc changer/  
Black  
DAB control input/  
KPA-SD100/KPA-HD100/KPA-SS100  
Speaker  
Connector  
Fuse(10A)  
NOTE  
To connect these leads, refer to the  
relevant instruction manuals.  
B–1  
B–2  
B–3  
B–4  
B–5  
B–6  
B–7  
B–8  
Purple  
Purple/Black  
Gray  
Gray/Black  
White  
White/Black  
Green  
Rear Right (+)  
Rear Right ()  
Front Right (+)  
Front Right ()  
Front Left (+)  
Front Left ()  
Rear Left (+)  
Rear Left ()  
Wiring harness  
(Accessory1)  
External amplifier control cable  
Green/Black  
(Pink / Black)  
To "EXT.AMP.CONT." terminal of the  
amplifier having the external amp  
control function.  
EXT.CONT  
Battery cable (Yellow)  
TEL mute cable (Brown)  
Ignition cable (Red)  
Connect to the terminal that is  
grounded when either the telephone  
rings or during conversation.  
TEL MUTE  
NOTE  
To connect the KENWOOD navigation  
system, consult your navigation manual.  
Connect either to the power control  
terminal when using the optional  
power amplifier, or to the antenna  
control terminal in the vehicle.  
Power control/ Motor antenna  
A–7 Pin (Red)  
control cable (Blue/White)  
P.CONT  
A–4 Pin (Yellow)  
ANT.CONT  
8
7
6
5
4
3
2
1
NOTE  
Connector A  
Connector B  
If no connections are  
made, do not let the cable  
come out from the tab.  
8
7
6
5
4
3
2
1
— 46 —  
Installtion  
2WARNING  
Installation  
Connecting the ISO Connector (see p.46)  
The pin arrangement for the ISO connectors depends on the  
type of vehicle you drive. Make sure to make the proper  
connections to prevent damage to the unit.  
Firewall or metal support  
The default connection for the wiring harness is described in 1  
below. If the ISO connector pins are set as described in 2 or 3,  
make the connection as illustrated.  
Screw (M4X8)  
(commercially  
available)  
1 (Default setting) The A-7 pin (red) of the vehicle's ISO  
connector is linked with the ignition, and the A-4 pin (yellow)  
is connected to the constant power supply.  
Unit  
Vehicle  
Ignition cable (Red)  
A–7 Pin (Red)  
Bend the tabs of the  
mounting sleeve  
with a screwdriver or  
similar utensil and  
attach it in place.  
Battery cable (Yellow)  
A–4 Pin (Yellow)  
Self-tapping  
screw  
(commercially  
available)  
Metal mounting  
strap  
(commercially  
available)  
2 The A-7 pin (red) of the vehicle's ISO connector is connected  
to the constant power supply, and the A-4 pin (yellow) is  
linked to the ignition.  
NOTE  
Unit  
Vehicle  
Make sure that the unit is installed securely in place. If the unit  
is unstable, it may malfunction (eg, the sound may skip).  
Ignition cable (Red)  
A–7 Pin (Red)  
Battery cable (Yellow)  
A–4 Pin (Yellow)  
3 The A-7 pin (red) of the vehicle's ISO connector is not  
connected to anything, whilst the A-4 pin (yellow) is connected  
to the constant power supply (or both the A-7 (red) and A-4  
(yellow) pins are connected to the constant power supply).  
Unit  
Vehicle  
Connect to a power source that can be  
turned on and off with the ignition key.  
Ignition cable (Red)  
2CAUTION  
To attach this unit, make sure the front of the control panel faces  
you and fit it into the mounting sleeve by pressing the four corners  
of the hard rubber frame at the same time.  
Battery cable (Yellow)  
A–4 Pin (Yellow)  
Do not apply strong pressure to other sections than the corners;  
otherwise troubles such as the impossibility of opening or closing  
the panel may result.  
— 47 —  
Removing the Unit  
Removing the Unit  
Removing the hard rubber frame  
Insert the removal tool into the indentations in the hard rubber  
frame, and pull it gently until the lock is released.  
1
Refer to the section “Removing the hard rubber frame” and  
then remove the hard rubber frame.  
2
3
Remove the Hex-head screw with integral washer (M4´8) on  
Egnlish  
the back panel.  
Insert the two removal tools deeply into the slots on each  
side, as shown.  
Screw (M4X8)  
(commercially  
available)  
Catch facing up  
Accessory4  
Removal tool  
Accessory2  
Removal tool  
4
Push upward the removal  
tool toward the top, and  
pull out the unit halfway  
whilst pressing towards the  
inside.  
2CAUTION  
Be careful to avoid injury from the catch pins on the removal  
tool.  
5
Pull the unit all the way out  
with your hands, being  
careful not to drop it.  
— 48 —  
Locking the faceplate to the unit  
Locking the faceplate to the unit  
If you want to lock the faceplate to the unit so that it does not  
fall off, follow the directions below.  
1
2
Refer to the function "Removing the faceplate (page 14)" and  
remove the faceplate.  
Insert the provided screw into the hole at the centre of the  
bottom side of the faceplate which you have removed from  
the unit.  
Accessory5  
3
Refer to the section "Removing the faceplate (page 14)" and  
then reattaching the faceplate.  
2CAUTION  
Never insert the taptite screws (ø2 ´ 4 mm) in any other screw  
holes than the one specified. If you insert it in another hole, it  
will contract and may cause damage to the mechanical parts  
inside the unit.  
— 49 —  
Troubleshooting Guide  
What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring.  
Before calling service, first check the following table for possible problems.  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
The power does not turn on.  
The fuse has blown.  
After checking for short circuits in the cables, replace  
the fuse with one having the same rating.  
Egnlish  
No ACC position on vehicle ignition.  
Connect the same cable to the ignition as the battery cable.  
If you have selected Standby  
mode, the power will go OFF  
automatically.  
The Power Off Timer function has been activated.  
If you do not want the power to go OFF automatically,  
cancel the Power Off Timer function.  
Nothing happens when the  
buttons are pressed.  
The computer chip in the unit is not functioning normally.  
Press the reset button on the unit (see page 4).  
Radio reception is poor.  
The car antenna is not extended.  
Pull out the antenna all the way.  
The antenna control cable is not connected.  
Connect the cable correctly, referring to the section on  
"Connecting Cables to Terminals".  
The memory is erased when  
the ignition is turned off.  
The battery cable has not been connected to the proper  
terminal.  
Connect the cable correctly, referring to the section on  
"Connecting Cables to Terminals".  
The ignition and battery cable are incorrectly connected.  
Connect the cable correctly, referring to the section on  
"Connecting Cables to Terminals".  
The faceplate does not open or  
close.  
The faceplate is incorrectly attached.  
Reattach the faceplate correctly, See the section on  
"Removing the Faceplate".(page.14)  
The TEL mute function does  
not work.  
The TEL mute cable is not connected properly.  
The TEL mute cable is touching a metal part of the car.  
Connect the cable correctly, referring to the section on  
"Connecting Cables to Terminals".  
The TEL mute function turns  
on even though the TEL mute  
cable is not connected.  
Pull the TEL mute cable away from the metal part of the  
car.  
Free switching of the sound  
quality.  
The system Q function is set on Scan mode.  
The system Q function is set on Scan mode.  
Refer to the “System Q” page and switch it to a  
function other than Scan mode. (see page 13)  
Audio control setting cannot be  
achieved.  
Refer to the “System Q” page and switch it to a  
function other than Scan mode.(see p. 13).  
— 50 —  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
No sound can be heard, or the  
volume is low.  
The Attenuator function is turned on.  
Turn off the Attenuator function.  
The fader and/or balance settings are set all the way to  
one side.  
Reset the fader and/or balance settings.  
The input/output cables or wiring harness are connected  
incorrectly.  
Reconnect the input/output cables and/or the wiring  
harness correctly. See the section on "Connecting  
Cables to Terminals".  
The values of Volume offset are low.  
Increase the values of Volume offset. (see p. 19)  
Check the speaker wiring.  
A speaker cable may be pinched by a screw in the car.  
The speakers are not wired correctly.  
The sound quality is poor or  
distorted.  
Reconnect the speaker cables so that each output  
terminal is connected to a different speaker.  
A CD ejects as soon as it is  
loaded.  
The CD is upside-down.  
The CD is quite dirty.  
Load the CD with the labelled side up.  
Clean the CD, referring to the section on "Cleaning CDs"  
(see page 6).  
The sound skips on a CD.  
The CD is scratched or dirty.  
Clean the CD, referring to the section on "Cleaning CDs"  
(see page 6).  
The specified track does not  
play.  
Random play has been selected.  
Turn off the random play function.  
Can’t remove disc.  
The cause is that more than 10 minutes has elapsed  
since the vehicle ACC switch was turned OFF.  
The disc can only be removed within 10 minutes of the  
ACC switch being turned OFF. If more than 10 minutes  
has elapsed, turn the ACC switch ON again and press  
the Eject button.  
— 51 —  
Troubleshooting Guide  
CD/External disc control mode  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
The disc control mode cannot  
be selected.  
No cable has been connected to the disc changer input  
terminal on the unit.  
Connect the cable to the disc changer input terminal on  
the unit.  
Egnlish  
The specified disc does not  
play, but another one plays  
instead.  
The specified CD is very dirty.  
Clean the CD.  
The CD is upside-down.  
Load the CD with the labelled side up.  
The disc is loaded in a different slot from that specified.  
Eject the disc magazine and check the number for the  
specified disc.  
The disc is severely scratched.  
Try another disc instead.  
The sound skips.  
Something is touching the disc changer.  
The CD is scratched or dirty.  
Remove whatever is touching it.  
If skipping happens at the same place when the car is  
stopped, something is wrong with the CD. Clean the CD.  
The display shows that the  
changer is being played, but no  
sound can be heard.  
The computer chip in the unit is not functioning normally.  
Press the reset button on the unit (see page 4).  
Turn off the random play or magazine random play  
function.  
The specified track does not  
play.  
Random play or magazine random play has been  
selected.  
Track repeat, disc repeat, track  
scan, random play, and  
magazine random play start by  
themselves.  
The setting is not cancelled.  
The settings for these functions remain on until the  
setting to off or the disc ejected, even if the power is  
turned off or the source changed.  
Cannot play CD-R or CD-RW.  
Finalization processing is not being conducted for CD-  
R/CD-RW.  
Conduct finalization processing with CD recorder.  
A non-compatible CD changer is being used to play the  
CD-R/CD-RW.  
Use a CD changer compatible with CD-R/CD-RW to play.  
If the following situations, consult your nearest service centre:  
• Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.  
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is  
entered when switching modes.  
— 52 —  
The following messages are displayed when certain problems are occurring in your system. Take the  
recommended actions.  
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.  
Eject  
] Load the disc magazine properly.  
No CD in the unit.  
] Insert the CD.  
No disc has been loaded in the disc magazine.  
] Load a disc into the disc magazine.  
No Disc  
No disc has been loaded in the disc magazine.  
] Load a disc into the disc magazine.  
TOC Error  
The CD is very dirty. The CD is upside-down. The CD is scratched a lot.  
] Clean the CD and load it correctly.  
Nothing has been recorded on the MD.  
Blank DISC  
No Tr DISC  
NO PANEL  
No tracks are recorded on the MD, although it has a title.  
The faceplate of the slave unit being connected to this unit has been removed.  
] Replace it.  
The unit is malfunctioning for some reason.  
] Press the reset button on the unit. If the "E- 77", code does not disappear, consult your nearest service centre.  
E-77  
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.  
] Check the disc magazine. And then, press the reset button on the unit.  
Mecha Error  
If the "Mecha Error" code does not disappear, consult your nearest service center.  
The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),  
Hold Error  
IN  
stopping all operation.  
] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F),  
the disc starts playing again.  
If this indicator blinks, the CD player is malfunctioning.  
] Eject the CD and try inseting it again.  
If the CD cannot be ejected, press the eject button and hold it in until the CD is ejected.  
— 53 —  
Specifications  
Specifications subject to change without notice.  
FM tuner section  
Audio section  
Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz  
Usable sensitivity (S/N = 26dB) .................................0.7 µV/75 ½  
Quieting Sensitivity (S/N = 46dB) ..............................1.6 µV/75 ½  
Frequency response ( 3.0 dB)..............................30 Hz – 15 kHz  
Signal to Noise ratio (MONO)..............................................65 dB  
Selectivity (DIN) ( 400 kHz)..............................................³ 80 dB  
Stereo separation (1 kHz) ....................................................35 dB  
Maximum output power.................................................50 W ´ 4  
Full Bandwidth Power (DIN 45324, +B=14.4V) ..............30 W ´ 4  
Tone action  
Egnlish  
Bass : ..........................................................100 Hz 10 dB  
Middle : .........................................................1 kHz 10 dB  
Treble : ........................................................10 kHz 10 dB  
Preout level / Load (during disc play)  
KDC-PS9590R/9090R..................................4500 mV/10 k½  
KDC-8090R.................................................1800 mV/10 k½  
Preout impedance (during disc play)  
MW tuner section  
Frequency range (9 kHz space) .....................531 kHz – 1611 kHz  
Usable sensitivity (S/N = 20dB) ...........................................25 µV  
KDC-PS9590R/9090R ...................................................80½  
KDC-8090R..............................................................² 600½  
LW tuner section  
Frequency range .............................................153 kHz – 281 kHz  
Usable sensitivity (S/N = 20dB) ...........................................45 µV  
General  
Operating voltage (11 – 16V allowable) ..............................14.4 V  
Current consumption.............................................................10 A  
Installation Size (W x H x D) ..........................182 ´ 53 ´ 162 mm  
Weight ................................................................................1.9 kg  
CD player section  
Laser diode....................................................GaAlAs (l=780 nm)  
Digital filter (D/A) .....................................8 Times Over Sampling  
D/A Converter .......................................................................1 Bit  
Spindle speed ..............................................500 – 200 rpm (CLV)  
Wow & Flutter........................................Below Measurable Limit  
Frequency response ( 1 dB).................................10 Hz – 20 kHz  
Total harmonic distortion (1 kHz) ......................................0.01 %  
Signal to Noise ratio (1 kHz) ..............................................105 dB  
Dynamic range  
KDC-PS9590R..........................................................100 dB  
KDC-9090R/8090R.....................................................93 dB  
Channel separation..............................................................96 dB  
— 54 —  
— 55 —  

Research In Motion Blackberry Bluetooth Headset HS 250 User Manual
QSC Audio Car Speaker K8 YOKE User Manual
Pioneer GM 3300T User Manual
Perle Systems Cable Box S 4GPT DSFP XT User Manual
Nokia BH 600 User Manual
Motorola Tx500 Wireless Bluetooth Car Hands Free Kit 89494N User Manual
Motorola HK201 User Manual
Mitutoyo Caller ID Box LSM 6900 User Manual
Kenwood CT 2050 User Manual
JVC GZ HD500U User Manual