Kenwood Ez700SR User Manual

Ez900HDS  
Ez700SR  
CD-RECEIVER  
INSTRUCTION MANUAL  
AMPLI-TUNER-LECTEUR DE CD  
MODE D’EMPLOI  
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM  
MANUAL DE INSTRUCCIONES  
Take the time to read through this instruction manual.  
Familiarity with installation and operation procedures will help  
you obtain the best performance from your new CD-receiver.  
For your records  
Record the serial number, found on the back of the unit, in the spaces  
designated on the warranty card, and in the space provided below.  
Refer to the model and serial numbers whenever you call upon your  
KENWOOD dealer for information or service on the product.  
Model Ez900HDS/700SR  
Serial number  
© B64-3019-00/00 (K)(A)  
Safety precautions  
Notes  
• If you experience problems during installation,  
consult your Kenwood dealer.  
• If the unit fails to operate properly, press the Reset  
button. The unit returns to factory settings when  
the Reset button is pressed.  
• Press the reset button if the disc auto changer fails  
to operate correctly. Normal operation should be  
restored.  
About CD players/disc changers  
connected to this unit  
KENWOOD disc changers/ CD players released in  
1999 or later can be connected to this unit.  
Refer to the catalog or consult your Kenwood  
dealer for connectable models of disc changers/  
CD players.  
Note that any KENWOOD disc changers/ CD players  
released in 1998 or earlier and disc changers made  
by other makers cannot be connected to this unit.  
Unsupported connection may result in damage.  
Setting the "O-N" Switch to the "N" position for the  
applicable KENWOOD disc changers/ CD players.  
The functions that can be used and the information  
that can be displayed will differ depending on the  
models being connected.  
What is HD Radio?  
2WARNING  
HD Radio is a technology that enables to send  
digital broadcasting as well as analog one using  
existing frequencies for FM or AM broadcasting.  
To prevent injury or fire, take the  
following precautions:  
• To prevent a short circuit, never put or leave any  
metallic objects (such as coins or metal tools)  
inside the unit.  
Quality of broadcast is improved to the level of  
music CD in digital FM and that of analog FM in  
digital AM.  
Moreover, if receiving condition is good, you can  
listen to programs in stereo with the digital AM  
broadcast.  
2CAUTION  
To prevent damage to the machine, take  
the following precautions:  
• Make sure to ground the unit to a negative 12V  
DC power supply.  
• Do not install the unit in a spot exposed to direct  
sunlight or excessive heat or humidity. Also avoid  
places with too much dust or the possibility of  
water splashing.  
• Do not set the removed faceplate or the faceplate  
case in areas exposed to direct sunlight, excessive  
heat or humidity. Also avoid places with too much  
dust or the possibility of water splashing.  
• To prevent deterioration, do not touch the  
terminals of the unit or faceplate with your  
fingers.  
• Do not subject the faceplate to excessive shock,  
as it is a piece of precision equipment.  
• When replacing a fuse, only use a new one with  
the prescribed rating. Using a fuse with the wrong  
rating may cause your unit to malfunction.  
• Do not apply excessive force to the moving  
faceplate. Doing so will cause damage or  
malfunction.  
c.s.  
Digital broadcasting can send other information  
than audio, so you can display data such as title of  
music.  
Reset button  
• We recommend the use of <Security Code>  
(page 28) to prevent theft.  
• Characters in the LCD may become difficult to  
read in temperatures below 41 ˚F (5 ˚C).  
• The illustrations of the display and the panel  
appearing in this manual are examples used to  
explain more clearly how the controls are used.  
Therefore, what appears on the display in the  
illustrations may differ from what appears on  
the display on the actual equipment, and some  
of the illustrations on the display may represent  
something impossible in actual operation.  
You can damage both your unit and the CD changer if  
you connect them incorrectly.  
LX-bus connection  
The LX AMP and the sensor unit cannot be  
connected simultaneously.  
You must connect any of them at a time.  
Lens Fogging  
Right after you turn on the car heater in cold  
weather, dew or condensation may form on  
the lens in the CD player of the unit. Called lens  
fogging, CDs may be impossible to play. In such  
a situation, remove the disc and wait for the  
condensation to evaporate. If the unit still does  
not operate normally after a while, consult your  
Kenwood dealer.  
Cleaning the Unit  
If the faceplate of this unit is stained, wipe it with a  
dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain off  
with a cloth moistened with neutral cleaner, then  
wipe neutral detergent off.  
• Do not use your own screws. Use only the screws  
provided. If you use the wrong screws, you could  
damage the unit.  
Applying spray cleaner directly to the unit may affect its  
mechanical parts. Wiping the faceplate with a hard cloth  
or using a volatile liquid such as thinner or alcohol may  
scratch the surface or erases characters.  
Attach the panel while you are on the  
vehicle  
The panel lock arm will be appeared when the  
panel is removed. Therefore, the panel must be  
attached during the driving.  
Cleaning the Faceplate Terminals  
If the terminals on the unit or faceplate get dirty,  
wipe them with a dry, soft cloth.  
Do Not Load 3-in. CDs in the CD slot  
If you try to load a 3 in. CD with its adapter into the  
unit, the adapter might separate from the CD and  
damage the unit.  
/05&  
5IJTꢀ$MBTTꢀ#ꢀEJHJUBMꢀBQQBSBUVTꢀDPNQMJFTꢀXJUIꢀ  
$BOBEJBOꢀ*$&4ꢁꢂꢂꢃꢄ  
|
English  
|
4
English  
5
Activating your SIRIUS subscription  
About CDs  
What is Sirius Satellite Radio?  
Handling CDs  
Removing CDs  
Activating your SIRIUS subscription  
• Don’t touch the recording surface of the CD.  
When removing CDs from this unit pull them out  
horizontally.  
Sirius is radio the way it was meant to be: up to  
100 new channels of digital quality programming  
delivered to listeners coast to coast via satellite. That  
means 60 channels of completely commercial-free  
music. Plus up to 40 more channels of news,  
sports, and entertainment from names like CNBC,  
Discovery, SCI-FI Channel, A&E, House of Blues, NPR,  
Speedvision and Comedy World.  
You can listen to SIRIUS radio program, you must  
subscribe to SIRIUS receive the service by SIRIUS  
Satellite Radio.  
CDs that can’t be used  
• CDs that aren’t round can’t be used.  
1 Selecting SIRIUS source  
Press the [SRC] button.  
Select the "SIRIUS" display.  
• CD-R and CD-RW are easier to damage than a  
normal music CD. Use a CD-R or a CD-RW after  
reading the caution items on the package etc.  
• Don’t stick tape etc. on the CD.  
Also, don’t use a CD with tape stuck on it.  
2 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
Sirius is live, dynamic entertainment, completely  
focused on listeners. Every minute of every day of  
every week will be different.  
All 60 commercial-free music channels are created  
in-house and hosted by DJs who know and love the  
music. Do you like Reggae?  
How about Classic Rock or New Rock? Sirius has an  
array of choices spanning a vast range of musical  
tastes including the hits of the 50’s, 60’s, 70’s, &  
80’s as well as Jazz, Country, Blues, Pop, Rap, R&B,  
Bluegrass, Alternative, Classical, Heavy Metal, Dance  
and many others...  
• CDs with coloring on the recording surface or that  
are dirty can’t be used.  
• This unit can only play the CDs with  
3 Select the SIRIUS ID (ESN) display  
Press the [AUDIO] knob.  
Your unit’s unique 12 digit SIRIUS ID Number will  
be displayed. Write the number down and have  
your credit card handy.  
When using a new CD  
If the CD center hole or outside rim has burrs, use it  
after removing them with a ball pen etc.  
.
It may not correctly play discs which do not have  
the mark.  
• A CD-R or CD-RW that hasn’t been finalized can’t  
be played. (For the finalization process refer to  
your CD-R/CD-RW writing software, and your CD-  
R/CD-RW recorder instruction manual.)  
This function can be used the [FM] / [AM] button.  
Burrs  
4 Exit Menu mode  
Press the [MENU] button for at least 1 second.  
Burrs  
5 Contact SIRIUS Satellite Radio  
sirius.com and follow the on-screen instructions  
(GET SIRIUS).  
You can also call SIRIUS toll-free at 1-888-539-  
SIRIUS (7474). The customer support will instruct  
you.  
CD storage  
From its state-of-the-art, digital broadcasting  
facility in Rockefeller Center, New York City, Sirius  
will deliver the broadest, deepest mix of radio  
entertainment from coast to coast.  
Sirius will bring you music and entertainment  
programming that is simply not available on  
traditional radio in any market across the country.  
It’s radio like you’ve never heard before.  
So Get Sirius and Listen Up! For more information,  
visit <www.sirius.com>.  
• Don’t place them in direct sunlight (On the seat  
or dashboard etc.) and where the temperature is  
high.  
• Store CDs in their cases.  
CD accessories  
Don’t use disc type accessories.  
CD cleaning  
Clean from the center of the disc and move  
outward.  
|
English  
|
6
English  
7
Notes on playing MP3/WMA  
Ez900HDS/Ez700SR can play MP3 (MPEG1, 2 Audio  
Layer 3)/WMA. Note, however, that the MP3/WMA  
recording media and formats acceptable are  
limited. When writing MP3/WMA, pay attention to  
the following restrictions.  
When you use your CD writer to record MP3/WMA  
up to the maximum disc capacity, disable additional  
writing. For recording on an empty disc up to the  
maximum capacity at once, check Disc at Once.  
When a File Search is executed with file ¡$  
being played ...  
Loading such a medium may produce loud noise to  
damage the speakers.  
Operation of  
(Current file: ¡$)  
the knob  
Do no attempt to play a medium containing a non-MP3/  
WMA file with the MP3/WMA extension.  
4 Knob  
Beginning of file ¡$ ¡#  
Acceptable media  
Play mode may not be possible when portions of the  
functions of Windows Media Player 9 or higher are used.  
The unit mistakes non-MP3/WMA files for MP3/WMA data  
as long as they have the MP3/WMA extension.  
Do not attempt to play for non-MP3/WMA discs.  
The MP3/WMA recording media acceptable to this  
unit are CD-ROM, CD-R, and CD-RW.  
When using CD-RW, do full format not quick format  
to prevent malfunction.  
¢ Knob  
¡% ¡&  
Entering ID3 tag and Contents Description  
The Displayable ID3 tag is ID3 version 1.x.  
For the character code, refer to the List of Codes.  
When a Folder Search is executed with file ¡$  
being played ...  
MP3/WMA playing order  
Acceptable medium formats  
When selected for play, Folder Search, File Search,  
or for Folder Select, files and folders are accessed  
in the order in which they were written by the CD  
writer.  
Operation of  
(Current folder: 4)  
the button  
The following formats are available for the media  
used in this unit. The maximum number of  
characters used for file and folder name including  
the delimiter (".") and three-character extension are  
indicated in parentheses.  
AM Button  
FM Button  
3 2 1 8 ...  
Because of this, the order in which they are  
expected to be played may not match the order in  
which they are actually played. You may be able to  
set the order in which MP3/WMA are to be played  
by writing them onto a medium such as a CD-R  
with their file names beginning with play sequence  
numbers such as "01" to "99", depending on your  
CD writer.  
5 6 7 8 1 ...  
• ISO 9660 Level 1 (12 characters)  
• ISO 9660 Level 2 (31 characters)  
• Joliet (64 character; Up to 32 characters are  
displayed)  
• Romeo (128 character; Up to 64 characters are  
displayed)  
• Long file name (200 characters; Up to 64  
characters are displayed)  
• Maximum number of characters for folder name:  
64 (Joliet; Up to 32 characters are displayed)  
For a list of available characters, see the instruction  
manual of the writing software and the section  
Entering file and folder names below.  
The media reproducible on this unit has the  
following limitations:  
When Folder Select is selected with file ¡$  
being played to move from folder to folder ...  
Operation of  
the knob or  
button  
(Current folder: 4)  
Entering file and folder names  
4 Knob  
¢ Knob  
AM Button  
FM Button  
3
6
2
5
For example, a medium with the following folder/  
file hierarchy is subject to Folder Search, File Search,  
or Folder Select as shown below.  
The code list characters are the only file names and  
folder names that can be entered and displayed.  
If you use any other character for entry, the file and  
folder names are not displayed correctly. They may  
neither be displayed correctly depending on the CD  
writer used.  
Example of a mediums folder/file hierarchy  
Folder  
The unit recognizes and plays only those MP3/WMA  
which have the MP3/WMA extension (.MP3/.WMA).  
File  
Root  
A file with a name entered with characters not on the  
code list may not play correctly.  
• Maximum number of directory levels: 8  
• Maximum number of files per folder: 255  
• Maximum number of folders: 50  
Writing files into a medium  
When a medium containing MP3/WMA data is  
loaded, the unit checks all the data on the medium.  
If the medium contains a lot of folders or non-MP3/  
WMA files, therefore, it takes a long time until the  
unit starts playing MP3/WMA.  
In addition, it may take time for the unit to move  
to the next MP3/WMA file or a File Search or Folder  
Search may not be performed smoothly.  
• Maximum number of files and folders: 512  
MP3/WMA written in the formats other than the  
above may not be successfully played and their file  
names or folder names are not properly displayed.  
Settings for your MP3/WMA encoder and  
CD writer  
Do the following setting when compressing  
audio data in MP3/WMA data with the MP3/WMA  
encoder.  
• Transfer bit rate: MP3: 8 —320 kbps  
WMA: 48 —192 kbps  
• Sampling frequency  
Level 1  
Level 3  
Level 5  
MP3: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz  
WMA: 32, 44.1, 48 kHz  
Level 2  
Level 4  
|
English  
|
8
English  
9
General features  
AUDIO/ 4/ ¢  
DISP  
OPEN VOL/ATT/LOUD  
When the Bass Extend is set to ON, low frequency  
response is extended by 20%.  
*¹ This mode is available only when <Subwoofer  
Output> (page 14) is ON.  
*² This mode is available only when <System Q  
Setting> (page 29) is ON.  
Loudness  
Compensating for low and high tones during low  
volume.  
OPEN  
Press the [LOUD] knob for at least 1 second.  
Each time the knob is pressed for at least 1  
second the Loudness turns ON or OFF.  
When it’s ON, "LOUD ON" is displayed.  
c.s.  
5 Exit Audio Control mode  
Press the [AUDIO] knob for at least 1 second.  
Audio Control  
Audio Setup  
MENU  
SRC  
AM/SW FM  
1 Select the source for adjustment  
Press the [SRC] button.  
1 Select the source for adjustment  
Press the [SRC] button.  
2 Enter Audio Control mode  
Press the [AUDIO] knob.  
2 Enter Audio Setup mode  
Press the [AUDIO] knob for at least 1 second.  
ST  
TI DAB NEWS MP3 WMA  
3 Select the Audio / Sub item for adjustment  
For Audio item : Press the [AUDIO] knob.  
Each time the knob is pressed the audio items  
that can be adjusted switch as shown below.  
For Sub item : Press the [FM] / [AM] button.  
Each time the button is pressed the sub items  
switches when audio item selected for Bass,  
Middle and Treble level.  
3 Select the setup item for adjustment  
Press the [AUDIO] knob.  
Each time the knob is pressed the items that can  
be adjusted switch as shown below.  
M
P
S
ATT DIGITAL ANALOG RDS PTY  
ATT indicator  
4 Adjust the Audio Setup item  
Turn the [4] / [¢] knob.  
Power  
Subscribe to SIRIUS  
Setup Item  
Display  
Range [Sound setting]  
You can use for all source in this unit when  
you subscribe to SIRIUS receive the service  
by SIRIUS Satellite Radio. Refer to <Activating  
your SIRIUS subscription> (page 6).  
System Q*¹  
"Flat/User/ [Flat/User memory/  
Rock/Pops/ Rock/Pops/  
Turning ON the Power  
Press the [SRC] button.  
4 Adjust the Audio / Sub item  
Turn the [4] / [¢] knob.  
Easy/Top40/ Easy/Top40/  
Jazz"  
Jazz]  
Turning OFF the Power  
Audio Item [Sub Item] Display  
Range  
Front High Pass Filter "HPF F"  
Rear High Pass Filter "HPF R"  
Through/100/125/170 Hz  
Through/200Hz  
Press the [SRC] button for at least 1 second.  
Sub woofer level*¹  
Bass [level]  
"SW Level" –15 — +15  
"Bass"  
–8 — +8  
Sub woofer Low Pass "LPF SW"  
Filter*²  
50/80/120/Through Hz  
[
Center Frequency]*² "Bass F"  
60/70/80/100 or 150 Hz  
Volume  
[Extend]*²  
"Bass EXT" ON/OFF  
Selecting the Source  
Volume offset  
"V- Offset" –8 —  
0
[Q Factor]*²  
Middle [level]  
"Bass Q"  
"Middle"  
1.00/1.25/1.50/2.00  
–8 — +8  
Increasing Volume  
Turn the [VOL] knob clockwise.  
Press the [SRC] button.  
[
Center Frequency]*² "MID F"  
[Q Factor]*²  
Treble [level]  
Center Frequency]*² "TRE F"  
"Balance" Left 15 — Right 15  
"Fader" Rear 15 — Front 15  
0.5/1.0/1.5/2.0 kHz  
Source required  
SIRIUS  
HD Radio*² (Ez900HDS)  
Tuner*² (Ez700SR) or HD Radio*²  
(Ez700SR : Optional accessory)  
CD*²  
External disc*² (Optional accessory)  
Auxiliary input*² (Optional accessory)  
Auxiliary input*¹, ²  
Display  
"SIRIUS"  
"HD Radio"  
*¹System Q: You can recall the best sound setting  
Decreasing Volume  
Turn the [VOL] knob counterclockwise.  
"Middle Q" 1.0/2.0  
"Treble" –8 — +8  
10.0/12.5/15.0/17.5 kHz  
preset for different types of music.  
- User memory: The values set on the <Audio  
Control> (page 11).  
- Each setting value is changed with the <Speaker  
Setting> (page 12).  
[
Balance  
Fader  
"TUNER" or "HD Radio"  
"CD"  
Attenuator  
- First, select the speaker type with the Speaker  
setting.  
"CD CH"  
"AUX EXT"  
"AUX"  
Turning the volume down quickly.  
According to the Bass Q Factor setting value, the  
frequencies that can be set in Bass Center Frequency  
change as shown below.  
*² This mode is available only when <Subwoofer  
Output> (page 14) is ON.  
Volume offset: Each source’s volume can be set as a  
difference from the basic volume.  
Press the [ATT] knob.  
Each time the knob is pressed the Attenuator  
turns ON or OFF.  
Standby (Illumination only mode)  
"STANDBY"  
Bass Q Factor  
1.00/1.25/1.50  
2.00  
Bass Center Frequency  
60/70/80/100  
60/70/80/150  
When it’s ON, the "ATT" indicator blinks.  
5 Exit Audio Setup mode  
Press the [AUDIO] knob for at least 1 second.  
*¹ You can select this source when <Built-in Auxiliary  
input Setting> (page 32) is set to "AUX ON".  
|
English  
|
10  
English  
11  
General features  
In MP3/WMA source  
Speaker Setting  
Station/Disc Naming (SNPS/DNPS)  
Information  
Display  
"TITLE"  
"ALBUM"  
"FOLDER NAME"  
"FILE NAME"  
"P-Time"  
Fine-tuning so that the System Q value is optimal  
when setting the speaker type.  
Attaching a title to a Station or CD.  
When operation stops for 10 seconds the name at  
that time is registered, and Name Set mode closes.  
Memory numbers  
- FM: 32 stations  
- AM: 16 stations  
Song title & Artist name  
Album name & Artist name  
Folder name  
File name  
Track number & Play time  
1 Receive/play the station/disc you want to  
attach a title to  
1 Enter Standby  
Press the [SRC] button.  
Select the "STANDBY" display.  
- Internal CD player: 30 discs  
Refer to the <Switching Display> (page 12) and select  
either "DNPS" or "SNPS". No name can be attached to  
the source if "DNPS" or "SNPS" cannot be selected for  
it.  
- External CD changer/ player: Varies according to the  
CD changer/ player. Refer to the CD changer/ player  
manual.  
The title of station/CD can be changed by the same  
operation used to name it.  
2 Enter Speaker Setting mode  
Press the [AUDIO] knob.  
In SIRIUS source  
Information  
Channel name  
Song Title  
Display  
"Channel Name"  
"Song Title"  
"Artist Name"  
"Composer"  
"Category"  
3 Select the Speaker type  
Turn the [4] / [¢] knob.  
Each time the knob is turned the setting switches  
as shown below.  
2 Enter name set mode  
Press the [DISP] button for at least 2 seconds.  
"NAME SET" is displayed.  
Artist name  
Composer name  
Category name  
Band & Channel number  
3 Move the cursor to the enter character  
position  
Press the [AUDIO] knob .  
Speaker type  
OFF  
Display  
"SP OFF"  
Auxiliary Input Display Setting  
"Channel No"  
Selecting the display when this device is switched  
to Auxiliary input source.  
For 5 & 4 in. speaker  
For 6 & 6x9 in. speaker  
For the OEM speaker  
"SP 5/4 inch"  
"SP 6*9/6 inch"  
"SP O.E.M."  
In HD Radio source  
1 Select Auxiliary input source  
Press the [SRC] button.  
Select the "AUX"/"AUX EXT" display.  
Information  
Station name  
Song title/ Artist name/  
Album name/ Genre  
Frequency  
Display  
"Station Name"  
"Title"  
This function can be used the [FM] / [AM] button.  
4 Select the character type  
Press the [MENU] button.  
Each time the button is pressed the character  
type switches as shown below.  
4 Exit Speaker Setting mode  
Press the [AUDIO] knob.  
2 Enter Auxiliary input display setting mode  
Press the [DISP] button for at least 2 seconds.  
The presently selected AUX Name is blinks.  
"Frequency"  
In Auxiliary input source  
Character type  
Alphabet upper case  
Alphabet lower case  
Numbers and symbols  
Special characters (Accent characters)  
Switching Display  
3 Select the Auxiliary input display  
Information  
Auxiliary input name  
Switching the information displayed.  
Turn the [4] / [¢] knob.  
Each time the knob is turned it switches through  
Press the [DISP] button.  
Each time the button is pressed the display  
switches as shown below.  
the below displays.  
• "AUX"/"AUX EXT"  
• "TV"  
• "VIDEO"  
• "GAME"  
If the Disc title, Track title, Song title & Artist name, or  
5 Select the characters  
Turn the [4] / [¢] knob.  
Album name & Artist name is selected when the disc  
which does not have Disc title, Track title, Song title,  
Album name, or Artist name is played, track number  
and play time are displayed.  
In Tuner source  
Information  
Display  
• "PORTABLE"  
• "DVD"  
Station name or Frequency  
Frequency  
"BAND+SNPS"  
"BAND+FREQ"  
Characters can be entered by using a remote with a  
number buttons.  
The Album name cannot be displayed during WMA  
play.  
If the text, including Channel name, etc. is selected  
when the channel which does not have text, including  
Channel name, etc. is played, band & channel number  
is displayed. (In SIRIUS source)  
4 Exit Auxiliary input display setting mode  
Press the [DISP] button.  
Example: If "DANCE" is entered.  
In CD & External disc source  
Character  
"D"  
"A"  
"N"  
"C"  
Button  
[3]  
[2]  
[6]  
[2]  
Times pressed  
Information  
Disc title  
Track title  
Track number & Play time  
Disc name  
Display  
"D-TITLE"  
"T-TITLE"  
"P-Time"  
"DNPS"  
1
1
2
3
2
When operation stops for 10 seconds, the name  
at that time is selected, and Auxiliary input display  
setting mode closes.  
The Auxiliary Input Display (AUX) can be set only  
when <Built-in Auxiliary input Setting> (page 32) is set  
to "AUX ON".  
The Auxiliary Input Display (AUX EXT) can be set only  
when the auxiliary input of optional KCA-S210A is  
used.  
Displayed information except "Frequency" are shown  
only when you receive text in digital broadcasting. If  
text cannot be displayed, frequency will be shown. (In  
HD Radio source)  
Display mode setting item (LX AMP) can be displayed  
when connecting the LX AMP unit.  
"E"  
[3]  
6 Repeat steps 3 through 5 and enter the name.  
7 Exit name set mode  
Press the [DISP] button.  
|
English  
|
12  
English  
13  
Function of the Ez700SR  
General features  
Tuner features  
SRC  
AM FM  
4/ ¢  
Theft Deterrent Faceplate  
Subwoofer Output  
The faceplate of the unit can be detached and  
taken with you, helping to deter theft.  
Turning the Subwoofer output ON or OFF.  
Press the [SW] button for at least 1 second.  
Each time the button is pressed Subwoofer  
output switches ON or OFF.  
OPEN  
Removing the Faceplate  
c.s.  
1 Press the [OPEN] button.  
Drop open the faceplate.  
When it’s ON, "Sub-W ON" is displayed.  
2 Drawing the faceplate to left side pull it to  
the front and remove it.  
TEL Mute  
1 - 6  
AUTO/AME  
The audio system automatically mutes when a  
call comes in.  
ST indicator  
Preset station number  
When a call comes in  
"CALL" is displayed.  
The audio system pauses.  
Listening to the audio during a call  
Press the [SRC] button.  
The "CALL" display disappears and the audio  
system comes back ON.  
ST  
TI DAB NEWS MP3 WMA  
M
P
S
ATT DIGITAL ANALOG RDS PTY  
The faceplate is a precision piece of equipment and  
can be damaged by shocks or jolts. For that reason,  
keep the faceplate in its special storage case while  
detached.  
Do not expose the faceplate or its storage case to  
direct sunlight or excessive heat or humidity. Also  
avoid places with too much dust or the possibility of  
water splashing.  
When the call ends  
Hang up the phone.  
The "CALL" display disappears and the audio  
system comes back ON.  
Frequency display  
Band display  
Tuning  
Tuning Mode  
Selecting the station.  
Choose the tuning mode.  
Reattaching the Faceplate  
Press the [AUTO] button.  
Each time the button is pressed the Tuning  
mode switches as shown below.  
1 Align the shaft on the unit with the  
depression on the faceplate.  
1 Select tuner source  
Press the [SRC] button.  
Select the "TUNER" display.  
Tuning mode  
Display  
Operation  
Automatic search for a station.  
Search in order of the stations  
in the Preset memory.  
Normal manual tuning control.  
2 Select the band  
Press the [FM] / [AM] button.  
Each time the [FM] button is pressed it switches  
between the FM1, FM2, and FM3 bands.  
Auto seek  
"Auto 1"  
Preset station seek "Auto 2"  
Manual "Manual"  
3 Tune up or down band  
Turn the [4] / [¢] knob.  
2 Push the faceplate in until it clicks.  
The faceplate is locked in place, allowing you to  
use the unit.  
During reception of stereo stations the "ST" indicator  
is ON.  
|
English  
|
14  
English  
15  
Function of the Ez700SR  
Function of the Ez700SR  
Tuner features  
HD Radio control features  
SRC  
AM FM  
4/ ¢  
Function of remote  
Auto Memory Entry  
Direct Access Tuning  
Putting stations with good reception in the  
memory automatically.  
Entering the frequency and tuning.  
OPEN  
1 Select the band for Auto Memory Entry  
Press the [FM] / [AM] button.  
1 Select the band  
Press the [FM] / [AM] button.  
c.s.  
2 Open Auto Memory Entry  
2 Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote.  
"– – – –" is displayed.  
Press the [AME] button for at least 2 seconds.  
When 6 stations that can be received are put in  
the memory Auto Memory Entry closes.  
3 Enter the frequency  
Press the number buttons on the remote.  
Example:  
1 - 6  
AUTO/AME  
Preset station number  
ST indicator  
Desired frequency  
92.1 MHz (FM)  
810 kHz (AM)  
Press button  
[0], [9], [2], [1]  
[0], [8], [1], [0]  
Preset Tuning  
Calling up the stations in the memory.  
1 Select the band  
Press the [FM] / [AM] button.  
Canceling Direct Access Tuning  
Press the [DIRECT] button on the remote.  
ST  
TI DAB NEWS MP3 WMA  
M
P
S
2 Call up the station  
Press the desired [1] — [6] button.  
ATT DIGITAL ANALOG RDS PTY  
If you make no button operation for 10 seconds, the  
Direct Access Tuning mode is automatically canceled.  
Band display  
Frequency display  
Station Preset Memory  
3 Tune up or down band  
Turn the [4] / [¢] knob.  
NOTE  
With the HD Radio tuner, you can use the similar  
functions to <Tuning Mode>, <Station Preset  
Memory>, <Auto Memory Entry>, and <Preset  
Tuning> of Tuner features. Refer to Tuner features  
(page 15,16) for how to use the functions.  
Putting the station in the memory.  
1 Select the band  
Press the [FM] / [AM] button.  
When you connect an HD Radio, Tuner features of  
the unit are disabled and switched to HD Radio tuner  
features. A portion of the setting methods including  
the Tuning Mode will change.  
2 Select the frequency to put in the memory  
Turn the [4] / [¢] knob.  
Tuning  
During reception of stereo stations the "ST" indicator  
is ON.  
The setting of the CRSC is always ON. Switching to  
OFF is not possible.  
Using <Receive mode Setting> (page 30) the modes  
can be switched to digital broadcast automatic  
switching, analog broadcast only, or digital broadcast  
only.  
3 Put the frequency in the memory  
Press the desired [1] — [6] button for at least  
2 seconds.  
The preset number display blinks 1 time.  
On each band, 1 station can be put in the  
memory on each [1] — [6] button.  
Selecting the station.  
1 Select HD Radio source  
Press the [SRC] button.  
Select the "HD Radio" display.  
2 Select the band  
Press the [FM] button.  
Each time the [FM] button is pressed it switches  
between the HF1, HF2, and HF3 bands.  
When the [AM] button is pressed, it switches  
HA band.  
When "Digital" has been set with <Receive mode  
Setting> (page 30), the seek time will be longer to  
allow a check of whether the transmission is a digital  
broadcast.  
|
English  
|
16  
English  
17  
Function of the Ez900HDS  
HD Radio features  
SRC  
AM FM  
4/ ¢  
SCROLL  
Station Preset Memory  
Putting the station in the memory.  
1 Select the band  
Press the [FM] / [AM] button.  
OPEN  
c.s.  
2 Select the frequency to put in the memory  
Turn the [4] / [¢] knob.  
3 Put the frequency in the memory  
Press the desired [1] — [6] button for at least  
2 seconds.  
The preset number display blinks 1 time.  
On each band, 1 station can be put in the  
memory on each [1] — [6] button.  
1 - 6  
AUTO/AME  
Frequency display  
Preset station number  
ST indicator  
Auto Memory Entry  
Putting stations with good reception in the  
memory automatically.  
ST  
TI DAB NEWS MP3 WMA  
M
P
S
ATT DIGITAL ANALOG RDS PTY  
1 Select the band for Auto Memory Entry  
Press the [FM] / [AM] button.  
DIGITAL indicator  
ANALOG indicator  
Band display  
2 Open Auto Memory Entry  
Press the [AME] button for at least 2 seconds.  
When 6 stations that can be received are put in  
the memory Auto Memory Entry closes.  
Using <Receive mode Setting> (page 30) the modes  
can be switched to digital broadcast automatic  
switching, analog broadcast only, or digital broadcast  
only.  
When "Digital" has been set with <Receive mode  
Setting> (page 30), the seek time will be longer to  
allow a check of whether the transmission is a digital  
broadcast.  
Tuning  
Selecting the station.  
1 Select HD Radio source  
Press the [SRC] button.  
Select the "HD Radio" display.  
Preset Tuning  
Calling up the stations in the memory.  
2 Select the band  
Press the [FM] button.  
Each time the [FM] button is pressed, it switches  
between the HF1, HF2, and HF3 bands.  
When the [AM] button is pressed, it switches  
HA band.  
1 Select the band  
Press the [FM] / [AM] button.  
Tuning Mode  
2 Call up the station  
Press the desired [1] — [6] button.  
Choose the tuning mode.  
Press the [AUTO] button.  
Each time the button is pressed the Tuning  
mode switches as shown below.  
3 Tune up or down band  
Turn the [4] / [¢] knob.  
Text Scroll  
Tuning mode  
Display  
Operation  
When "DIGITAL" indicator is displayed that digital  
broadcast is being received.  
When "ANALOG" indicator is displayed that analog  
broadcast is being received.  
During reception of stereo stations the "ST" indicator  
is ON.  
Auto seek  
Preset station seek "Auto 2"  
"Auto 1"  
Automatic search for a station.  
Search in order of the stations  
in the Preset memory.  
Scrolls the displayed title.  
Press the [SCROLL] button for at least 1  
second.  
Manual "Manual"  
Normal manual tuning control.  
|
English  
|
18  
English  
19  
SIRIUS features  
FM  
AUDIO/ 4/ ¢  
SCROLL  
SRC  
Preset Tuning  
Channel Skip/ Lock function  
Calling up the channels in the memory.  
You can Skip and Lock unwanted channels while  
tuning and prohibit access particular channels.  
1 Select the band  
Press the [FM] button.  
OPEN  
Channel Skip:  
With hundreds over of Channel available, you  
may wish to limit the accessible listed only those  
you like.  
2 Call up the channel  
Press the desired [1] — [6] button.  
c.s.  
Channel Lock:  
You can LOCK particular channels so that can  
be accessed only with Lock Code (4 digit code)  
that you define. Channel Lock function useful  
for preventing their children access to specific  
content.  
Channel Scan  
38  
AUTO  
1 - 6  
Every receivable Channel is checked for 10  
seconds.  
Preset channel number  
1 Start Channel Scan  
Press the [AUTO] button for at least 1 second.  
The channel number display blinks.  
You can choose the skip and lock channels with  
<Preset Tuning> (page 21) and <Direct Access  
Tuning> (page 22).  
Refer to <SIRIUS Channel Skip/ Lock Setting> (page31)  
and <SIRIUS Lock Code Setting> (page32).  
2 Release it when the song you want to listen  
to is received  
Press the [AUTO] button for at least 1 second.  
MP3  
ST  
TI DAB NEWS  
WMA  
M
P
S
ATT DIGITAL ANALOG RDS PTY  
Listen to Channel Lock content  
When you choose the Lock Channels directory  
with <Preset Tuning> (page 21) or <Direct Access  
Tuning> (page 22). When you choose Lock  
Channel, "CODE ----" is appeared on display. You  
can listen the channel when input Lock Code (4  
digit) is correctly.  
Band display  
Channel display  
Switching Seek Mode  
Sets the seeking mode.  
Tuning  
Selecting SIRIUS source  
Press the [AUTO] button.  
Each time the button is pressed the Seek mode  
switches as shown below.  
Selecting the channel.  
Selecting SIRIUS source  
Press the [SRC] button.  
Select the "SIRIUS" display.  
Turn the [4] / [¢] knob.  
1 Select the digits to enter  
Press the [AUDIO] knob.  
Display  
"Channel"  
"Preset"  
Operation  
Normal manual seeking control.  
Search in order of the channels in the Preset  
memory.  
This function can be used the [FM] / [AM] button.  
You need to subscribe to SIRIUS receive the service by  
SIRIUS Satellite Radio. Consult SIRIUS if "CALL 888-539  
SIRIUS TO SUBSCRIBE" appears. Refer to <Activating  
your SIRIUS subscription> (page6).  
It may take a little time to start receiving after you  
selected the SIRIUS source.  
If you cannot receive any signal in the input Channel  
due to a bad condition on radio wave or another  
problem, "Acquiring Signal" appears.  
Channel Preset Memory  
2 Select the Lock Code numbers  
Turn the [4] / [¢] knob.  
3 Repeat steps 1 and 2, and complete the Lock  
Code.  
Putting the channels in the memory.  
1 Select the band  
Press the [FM] button.  
2 Select the channel to put in the memory  
Turn the [4] / [¢] knob.  
4 Confirm the Lock Code  
Press the [AUDIO] knob for at least 1 second.  
"APPROVED" is displayed.  
3 Put the channel in the memory  
Press the desired [1] — [6] button for at least  
2 seconds.  
The preset number display blinks 1 time.  
On each band, 1 channel can be put in the  
memory on each [1] — [6] button.  
When the wrong code is entered, this function is  
canceled.  
Selecting the Preset Band  
Press the [FM] button.  
Each time the button is pressed the preset band  
switches between the SR1, SR2, SR3 and SR4.  
|
English  
|
20  
English  
21  
SIRIUS features  
CD/MP3/WMA/External disc control features  
OPEN  
SRC  
AM  
FM  
AUDIO/  
4/ ¢  
SCROLL  
Category and Channel Search  
Text Scroll  
Select the category and channel you wish to  
listen to.  
Scrolls the displayed channel name and other  
items.  
OPEN  
Press the [SCROLL] button for at least 1  
second.  
1 Enter category and channel search mode  
Press the [38] button.  
c.s.  
2 Select the item (category or channel)  
Press the [AUDIO] knob.  
Each time the knob is pressed the search mode  
switches category or channel.  
SCAN RDM/ REP F.SEL M.RDM  
3
38  
3 Select the category or channel  
Turn the [4] / [¢] knob.  
Disc number  
4 Canceling category and channel search  
mode  
Press the [38] button.  
You cannot operate this function until all the Category  
information is acquired.  
ST  
TI DAB NEWS MP3 WMA  
M
P
S
ATT DIGITAL ANALOG RDS PTY  
Function of remote  
MP3 indicator  
IN indicator  
WMA indicator  
Direct Access Tuning  
Entering the channel and tuning.  
Playing External Disc  
1 Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote.  
Playing discs set in the optional accessory disc  
player connected to this unit.  
Press the [SRC] button.  
Select the display for the disc player you want.  
Display examples:  
2 Enter the channel  
Press the number buttons.  
3 Do Channel Search  
Press the [4] / [¢] button.  
Display  
"CD2"  
Disc player  
CD player  
Canceling Direct Access Tuning  
Press the [DIRECT] button on the remote.  
"CD CH"  
"MD CH"  
CD changer  
MD changer  
Pause and play  
Press the [38] button.  
Each time the button is pressed it pauses and  
plays.  
If you make no button operation for 10 seconds, the  
Direct Access Tuning mode is automatically canceled.  
You can set up until Channel number 223.  
You cannot search for channel number which is not  
broadcasting.  
Disc 10 is displayed as "0".  
The functions that can be used and the information  
that can be displayed will differ depending on the  
external disc players being connected.  
|
English  
|
22  
English  
23  
CD/MP3/WMA/External disc control features  
Function of remote  
Playing CD & MP3/WMA  
Scan Play  
Direct Track/File Search  
Playing the first part of each song on the disc  
or MP3/WMA folder you are listening to and  
searching for the song you want to listen to.  
3 in. (8cm) disc can’t be played. Using an adapter and  
inserting them into this unit can cause damage.  
When there is no disc inserted  
Doing Track/File Search by entering the track/file  
number.  
1 Drop open the faceplate  
Press the [OPEN] button.  
The MP3/WMA media that this unit can play are CD-  
ROM, CD-R, and CD-RW.  
1 Start Scan Play  
Press the [SCAN] button.  
"Scan ON" is displayed.  
1 Enter the track/file number  
Press the number buttons on the remote.  
2 Insert a disc.  
3 Press the faceplate on the left side, and  
return it to its former position.  
The medium formats must be ISO 9660 Level 1, Level  
2, Joliet, or Romeo. The methods and precautions to  
be followed for writing MP3/WMA data are covered in  
<Notes on playing MP3/WMA> (page 8).  
Check that section before creating your MP3/WMA  
media.  
2 Do Track/File Search  
Press the [4] / [¢] button.  
2 Release it when the song you want to listen  
to is played  
Press the [SCAN] button.  
Canceling Direct Track/File Search  
Press the [38] button.  
When the faceplate has been dropped open, it might  
interfere with the shift lever or something else. If this  
happens, pay attention to safety and move the shift  
lever or take an appropriate action, then operate the  
unit.  
Do not use the unit with the faceplate in the open  
condition. If it’s used in the open position dust can  
enter the inside part and cause damage.  
Function of disc changers with remote  
Random Play  
Direct Disc Search  
Fast Forwarding and Reversing  
Play all the songs on the disc or MP3/WMA folder  
in random order.  
Doing Disc Search by entering the disc number.  
Fast Forwarding  
Press the [RDM] button.  
Each time the button is pressed Random Play  
turns ON or OFF.  
Hold turn on the [¢] knob.  
Release your finger to play the disc at that point.  
1 Enter the disc number  
When a disc is inserted, the "IN" indicator is ON.  
During MP3 is playing, the "MP3" indicator is ON.  
During WMA is playing, the "WMA" indicator is ON.  
Press the number buttons on the remote.  
Reversing  
2 Do Disc Search  
Press the [DISC–] / [DISC+] button.  
When it’s ON, "Random ON" is displayed.  
Hold turn on the [4] knob.  
Release your finger to play the disc at that point.  
When a disc is inserted  
Press the [SRC] button.  
Select the "CD" display.  
Canceling Direct Disc Search  
Press the [38] button.  
When the [¢] knob is turned, the next song select  
starts.  
The sound is not output while the MP3/WMA is  
played.  
Pause and play  
Press the [38] button.  
Each time the button is pressed it pauses and  
plays.  
Input "0" to select disc 10.  
Function of disc changer  
Magazine Random Play  
Track/File Search  
Eject the disc  
Track/File/Disc/Folder Repeat  
Play the songs on all the discs in the disc changer  
in random order.  
Searching for a song on the disc or in the MP3/  
WMA folder.  
1 Drop open the faceplate  
Press the [OPEN] button.  
Replaying the song, disc in the Disc changer or  
MP3/WMA folder you’re listening to.  
Press the [M.RDM] button.  
Each time the button is pressed the Magazine  
Random Play turns ON or OFF.  
Turn the [4] / [¢] knob.  
2 Eject the disc  
Press the [0] button.  
Press the [REP] button.  
Each time the button is pressed the Repeat Play  
switches as shown below.  
When it’s ON, "M-Random ON" is displayed.  
Function of disc changer/ MP3/ WMA  
In CD & External disc source  
Disc Search/Folder Search  
When the [¢] knob is turned, the next song select  
starts.  
Repeat play  
Track Repeat  
Disc Repeat (In Disc Changer)  
OFF  
Display  
"Repeat ON"/"T-Repeat ON"  
"D-Repeat ON"  
"Repeat OFF"  
Selecting the disc set in the Disc changer or the  
folder recorded on the MP3/WMA media.  
Press the [AM] / [FM] button.  
In MP3/WMA source  
3 Press the faceplate on the left side, and  
return it to its former position.  
Repeat play  
File Repeat  
Folder Repeat  
OFF  
Display  
"File REP ON"  
"FOLD REP ON"  
"Repeat OFF"  
|
English  
|
24  
English  
25  
CD/MP3/WMA/External disc control features  
Menu system  
AM FM AUDIO/ 4/ ¢  
SRC  
Function of MP3/WMA  
Text/Title Scroll  
Folder Select  
Scrolling the displayed CD text, MP3/WMA text,  
or MD title.  
Quickly selecting the folder you want to listen to.  
OPEN  
Press the [SCROLL] button for at least 1  
second.  
1 Enter Folder Select mode  
Press the [F.SEL] button.  
c.s.  
"Select Mode" is displayed.  
During Select mode the folder information is  
displayed as shown below.  
Function of disc changers with remote  
Folder name display  
Displays the current folder name.  
DNPP (Disc Name Preset Play)  
MENU  
Selecting the CD displayed in the DNPS of the  
CDs set in the Disc changer.  
Menu display  
1 Enter DNPP mode  
ST  
TI DAB NEWS MP3 WMA  
Press the [DNPP] button on the remote.  
When "DNPP" is displayed the DNPS display in  
order.  
M
P
S
ATT DIGITAL ANALOG RDS PTY  
2 Select the folder level  
Press the [FM] / [AM] button.  
Forward / Reverse display  
ST  
TI DAB NEWS MP3 WMA  
With the [FM] button you move 1 level down  
and with the [AM] button 1 level up.  
Press the [DISC+] / [DISC–] button.  
M
P
S
ATT DIGITAL ANALOG RDS PTY  
2 When the disc you want is displayed  
Press the [OK] button on the remote.  
The disc being displayed is played.  
Selecting a folder in the same level  
Turn the [4] / [¢] knob.  
Clock display  
With the [4] knob you move to the previous  
folder, and with the [¢] knob to the next  
folder.  
Canceling the DNPP mode  
Press the [DNPP] button on the remote.  
Menu System  
3 Set the menu item  
Turn the [4] / [¢] knob.  
Example: When "Beep" is selected, each time the  
knob is turned it switches "Beep ON"  
or "Beep OFF". Select 1 of them as the  
setting.  
Returning to the top level  
Press the [3] button.  
Setting during operation beep sound etc.  
functions.  
The Menu system basic operation method is  
explained here. The reference for the Menu items  
and their setting content is after this operation  
explanation.  
3 Decide the folder to play  
Press the [AUDIO] knob.  
The Folder Select mode releases, and the MP3/  
WMA in the folder being displayed is played.  
You can continue by returning to step 2 and  
setting other items.  
1 Enter Menu mode  
4 Exit Menu mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
• The methods for moving to other folders in the folder  
select mode are different from those in the folder  
search mode.  
See <Notes on playing MP3/WMA> (page 8) for  
details.  
Press the [MENU] button for at least 1 second.  
2 Select the menu item  
Press the [AUDIO] knob.  
Example: When you want to set the beep sound  
select the "Beep" display.  
When other items that are applicable to the basic  
operation method above are displayed afterwards  
their setting content chart is entered. (Normally the  
uppermost setting in the chart is the original setting.)  
Also, the explanation for items that aren’t applicable  
('Manual Clock Adjustment' etc.) are entered step by  
step.  
Canceling the Folder Select mode  
Press the [F.SEL] button.  
This function can be used the [FM] / [AM] button.  
|
English  
|
26  
English  
27  
Menu system  
In Standby mode  
Press the Reset button and when its removed  
from the battery power source  
DSI (Disabled System Indicator)  
Display  
"SystemQ ON"  
"SystemQ OFF"  
Setting  
The System Q factors are displayed.  
The System Q factors aren’t displayed.  
Security Code  
A red indicator will blink on the unit after the  
faceplate is removed, warning potential thieves.  
1 Turn the power ON.  
2 Do the step 4 through 7 operation, and enter  
the Security Code.  
"APPROVED" is displayed.  
The unit can be used.  
Because authorization by the Security Code is  
required when it’s removed from the vehicle,  
personalizing this unit is by using the Security  
Code is a help in preventing theft.  
Display  
"DSI ON"  
"DSI OFF"  
Setting  
LED flashes.  
LED OFF.  
In Standby mode  
Built-in Amp Mute Setting  
When the Security Code function is activated, the code  
can’t be changed and the function can’t be released.  
Note, the Security Code can be set as the 4 digit number  
of your choice.  
Toggles ON or OFF the mute control on the built-  
in amplifier.  
Turning ON this control enhances the preout  
quality.  
Touch Sensor Tone  
Selectable Illumination  
Setting the operation check sound (beep sound)  
ON or OFF.  
Selecting the button illumination color as green  
or red.  
1 Enter Standby  
Press the [SRC] button.  
Select the "STANDBY" display.  
Display  
"AMP Mute OFF"  
"AMP Mute ON"  
Setting  
The built-in amplifier activates.  
The built-in amplifier deactivates.  
Display  
Setting  
Display  
Setting  
"Beep ON"  
"Beep OFF"  
Beep is heard.  
Beep canceled.  
"Button Red"  
"Button Green"  
The illumination color is red.  
The illumination color is green.  
2 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
When "MENU" is displayed, "Security" is displayed.  
3 Enter Security Code mode  
In Built-in Auxiliary input source  
Manual Clock Adjustment  
Press the [MENU] button.  
Contrast Adjustment  
Dual Zone System  
When "ENTER" is displayed, "CODE" is displayed.  
1 Select Clock Adjustment mode  
Press the [AUDIO] knob.  
Select the "Clock Adjust" display.  
Adjusting the display contrast.  
Makes the sound different for the front channel  
and rear channel.  
4 Select the digits to enter  
Press the [AUDIO] knob.  
Display and Setting  
"Contrast 0"  
Display  
Setting  
"Zone2 OFF"  
"Zone2 ON"  
The front and rear are the same source sound.  
The front and rear are the different source sound.  
This function can be used the [FM] / [AM] button.  
• This function can be used the [FM] / [AM] button.  
"Contrast 7" (Original setting)  
"Contrast 10"  
5 Select the Security Code numbers  
Turn the [4] / [¢] knob.  
2 Enter Clock Adjust mode  
Press the [MENU] button.  
The time indicator (hours) is blinks.  
6 Repeat steps 4 and 5, and complete the  
When the Dual Zone System is on, there is only sound  
effect including Audio control for except selected  
source.  
When you set the Dual zone system to ON while the  
sub woofer preout is switched ON, the sound of the  
sub woofer preout isn’t output.  
Security Code.  
3 Select the item (hours or minutes)  
Press the [AUDIO] knob.  
7 Confirm the Security Code  
Press the [AUDIO] knob for at least 3 seconds.  
When "RE-ENTER" is displayed, "CODE" is  
displayed.  
Dimmer  
Dimming this unit’s display automatically when  
the vehicle light switch is turned ON.  
• This function can be used the [FM] / [AM] button.  
4 Adjust the hours or minutes  
8 Do the step 4 through 7 operation, and  
reenter the Security Code.  
"APPROVED" is displayed.  
Display  
"Dimmer ON"  
"Dimmer OFF"  
Setting  
The display dims.  
The display doesn’t dim.  
Turn the [4] / [¢] knob.  
When the Dual Zone System is OFF  
5 Exit Clock adjustment mode  
Press the [MENU] button.  
The Security Code function activates.  
Dual Zone System Setting  
Setting the Front channel and Rear channel  
sound in the Dual Zone System.  
When the wrong Code is entered in steps 4 through 6,  
repeat from step 4.  
System Q Setting  
Clock Display  
Display  
Setting  
Setting whether the display indicates the System  
Q factors (Bass center frequency, Bass Q factor,  
Bass extend, Middle center frequency, Middle  
Q factor, and Treble center frequency) in Audio  
control.  
Setting the clock display ON or OFF.  
"Zone2 Rear"  
The front is except the rear selected source, and  
the rear is selected source sound.  
Display  
"Clock ON"  
"Clock OFF"  
Setting  
The clock are displayed.  
The clock aren’t displayed.  
"Zone2 Front"  
The rear is except the front selected source, and  
the front is selected source sound.  
|
English  
|
28  
English  
29  
Menu system  
In SIRIUS source  
B.M.S. (Bass Management System)  
5 Exit Channel Skip/ Lock mode  
Receive mode Display  
Operation  
Auto mode  
"Auto"  
Press the [MENU] button.  
SIRIUS ID (ESN) display  
Analog broadcasts and digital  
broadcasts will be switched  
automatically.  
When both are being transmitted,  
the digital broadcast will have  
priority.  
Adjust the bass boost level of the external  
amplifier using the main unit.  
Canceling the Channel Lock mode  
Displaying the SIRIUS ID (Electronic Serial  
Number) display.  
1 Select Channel Skip/ Lock mode  
Press the [AUDIO] button.  
Select the "Skip/ Lock" display.  
Display  
Setting  
"AMP Bass FLT"  
"AMP Bass +6"  
"AMP Bass +12"  
"AMP Bass +18"  
Bass boost level is flat.  
Display  
"ESN = ************"  
Bass boost level is low (+6dB).  
Bass boost level is mid (+12dB).  
Bass boost level is high (+18dB).  
Digital  
"Digital"  
"Analog"  
Digital broadcasts only.  
Analog broadcasts only.  
Analog  
• This function can be used the [FM] / [AM] button.  
Serial & SIRIUS ID (ESN)  
2 Enter Channel Skip/ Lock mode  
Press the [MENU] button.  
"CH- *** - - " is displayed.  
It is especially important to retain the unit serial  
number and the electronic SIRIUS Identification  
number for service activation and potential future  
service changes.  
This function can be used the [FM] / [AM] button.  
Refer to the catalog or instruction manual for power  
4 Exit Receive mode  
Press the [MENU] button.  
amplifiers that can be controlled from this unit.  
For amplifiers there are the model that can be set  
from Flat to +18 dB, and the model that can be set  
from Flat to +12 dB.  
When an amplifier that can only be set to +12 is  
connected to the unit, "AMP Bass +18" won’t work  
correctly even if it’s selected.  
3 Select the channels  
Turn the [4] / [¢] knob.  
Even if the "Auto" setting, an analog broadcast will be  
received during the reception of a ball game mode  
(non-delayed broadcast program).  
4 Cancel for Lock mode  
Press the [AUDIO] knob for at least 1 second.  
"CODE ----" is displayed.  
In SIRIUS source  
SIRIUS Channel Skip/ Lock Setting  
You can Skip and Lock unwanted channels while  
tuning and prohibit access to the particular  
channels. (Channel Lock function without channel  
number 184)  
5 Select the digits to enter  
Press the [AUDIO] knob.  
In FM reception (Ez700SR)  
B.M.S. Frequency Offset  
In HD Radio (FM) mode (Ez900HDS)  
This function can be used the [FM] / [AM] button.  
Setting the central frequency boosted by B.M.S.  
CRSC (Clean Reception System  
Circuit)  
1 Select Channel Skip/ Lock mode  
Press the [AUDIO] button.  
Select the "Skip/ Lock" display.  
6 Select the Lock Code numbers  
Turn the [4] / [¢] knob.  
7 Repeat steps 5 and 6, and complete the Lock  
Code.  
Display  
Setting  
"AMP Freq NML"  
"AMP Freq Low"  
Boost with the normal central frequency.  
Drop the normal central frequency 20%.  
Temporarily have reception switched from  
stereo to mono to reduce multi-path noise when  
listening to the FM station.  
• This function can be used the [FM] / [AM] button.  
8 Confirm the Lock Code  
Display  
"CRSC ON"  
"CRSC OFF"  
Setting  
The CRSC is ON.  
The CRSC is OFF.  
2 Enter Channel Skip/ Lock mode  
Press the [MENU] button.  
"CH- *** - - " is displayed.  
Press the [AUDIO] knob for at least 1 second.  
"APPROVED" is displayed.  
In HD Radio mode  
Receive mode Setting  
9 Exit Channel Skip/ Lock mode  
Press the [MENU] button.  
Sets the receive mode.  
3 Select the channels  
Turn the [4] / [¢] knob.  
Strong electrical fields (such as from power lines) may  
1 Select the Receive mode  
Press the [AUDIO] knob.  
Select the "Receive Mode" display.  
cause unstable sound quality when CRSC is turned  
ON. In such a situation, turn it OFF.  
4 Set the item (Channel Skip or Lock)  
For Channel Skip:  
Press the [AUDIO] knob.  
When it's ON, "CH- *** S - " is displayed.  
Each time the [AUDIO] knob is pressed, the  
Channel Skip switches ON or OFF.  
For Channel Lock:  
Press the [AUDIO] knob for at least 1 second.  
When it’s ON, "CH- *** S L " is displayed.  
• This function can be used the [FM] / [AM] button.  
2 Enter Receive mode  
Press the [MENU] button.  
3 Set the Receive mode  
Press the [AUDIO] knob.  
Each time the knob is pressed the Receive mode  
switches as shown below.  
Channel Skip is automatically set in the unit when you  
set the Channel Lock function.  
|
English  
|
30  
English  
31  
Menu system  
In SIRIUS source  
When LX AMP unit connecting  
Text Scroll  
SIRIUS Lock Code Setting  
AMP Control  
Setting the displayed text scroll.  
If you have locked any streams in the channel  
lock mode, you will need to enter 4 digit Lock  
Code to unlock them. You can change the Lock  
Code (default is “0000”) as you like.  
You can control the LX AMP connected to the  
unit.  
Display  
"Scroll Auto"  
"Scroll MANU"  
Setting  
Repeats scroll.  
Scrolls when the display changes.  
1 Select AMP Control mode  
Press the [AUDIO] knob.  
1 Select Lock Code mode  
Press the [AUDIO] button.  
Select the "Lock Code" display.  
Select the "AMP Control" display.  
The text scrolled is shown below.  
- CD text  
- Folder name/ File name/ Song title/ Artist name/  
Album name  
- MD title  
• This function can be used the [FM] / [AM] button.  
2 Enter AMP Control mode  
Press the [MENU] button.  
• This function can be used the [FM] / [AM] button.  
- Text for the SIRIUS source, HD Radio source,  
including Channel name, etc.  
2 Enter Lock Code mode  
Press the [MENU] button.  
"CURRENT" is displayed.  
3 Select the AMP Control item for adjustment  
Press the [AUDIO] knob.  
3 Enter current Lock Code (default is “0000”)  
Select the digits to enter  
Press the [AUDIO] knob.  
For the details of the AMP Control item, see the  
Instruction manual attached to the LX AMP.  
Built-in Auxiliary input Setting  
Set the Built-in Auxiliary Input function.  
• This function can be used the [FM] / [AM] button.  
4 Adjust the AMP Control item  
Display  
"AUX OFF" When selecting the source there’s no Auxiliary Input.  
"AUX ON" When selecting the source there’s Auxiliary Input.  
Setting  
This function can be used the [FM] / [AM] button.  
Turn the [4] / [¢] knob.  
4 Select the Lock Code numbers  
Turn the [4] / [¢] knob.  
5 Exit AMP Control mode  
Press the [MENU] button.  
5 Repeat steps 3 and 4, and complete the Lock  
Code.  
You cannot use the LX AMP operation during standby  
mode.  
In Standby mode  
6 Confirm the Lock Code  
Press the [AUDIO] knob for at least 1 second.  
"NEW CODE" is displayed.  
CD Read Setting  
When there is a problem on playing a CD with  
special format, this setting play the CD by force.  
Display  
"CD READ 1"  
"CD READ 2"  
Setting  
Play CD and MP3/WMA.  
Play CD by force.  
When the wrong Code is entered in steps 3 through 5,  
repeat from step 1.  
7 Enter New Lock Code  
Repeat steps 3 through operations, enter  
New Lock Code.  
Setting "CD READ 2" cannot play MP3/WMA.  
"RE-ENTER" is displayed.  
Some music CDs may not be played back even in the  
"CD READ 2" mode.  
8 Reenter New Lock Code  
Repeat steps 3 through operations, reenter  
New Lock Code.  
"CODE CHANGED" is displayed.  
The Lock Code function activates.  
When the wrong Code is entered in step 8, repeat  
from step 1.  
9 Exit Channel Lock Code mode  
Press the [MENU] button.  
|
English  
|
32  
English  
33  
Basic Operations of remote  
In Tuner source  
In SIRIUS source  
[FM]/ [AM] buttons  
Select the band.  
[FM] button  
Select the preset band.  
SRC  
SRC  
Each time the [FM] button is pressed it switches  
between the FM1, FM2, and FM3 bands.  
VOL.  
[4]/ [¢] buttons  
Search up or down channel.  
ATT  
ATT  
38  
[4]/ [¢] buttons  
Tune up or down band.  
VOL.  
38  
[0] — [9] buttons  
Press buttons [1] — [6] to recall preset channels.  
FM+  
DISC  
FM/AM/DISC+/DISC–  
4
¢
[0] — [9] buttons  
AM–  
[DIRECT] button  
Enters and cancels the <Direct Access Tuning>  
(page 22) mode.  
Press buttons [1] — [6] to recall preset stations.  
4/¢  
DNPP  
DNPP  
/SBF  
DIRECT  
/OK  
[DIRECT] button  
Enters and cancels the <Direct Access Tuning>  
(page 16) mode.  
Not Used  
DIRECT  
ABC  
JKL  
TUV  
QZ  
DEF  
MNO  
WXY  
GHI  
[0] — [9]  
PRS  
In Disc source  
[4]/ [¢] buttons  
Doing track/file forward and backward.  
[DISC+]/ [DISC–] buttons  
Doing disc/folder forward and backward.  
[38] button  
Each time the button is pressed the song pauses  
and plays.  
Loading and Replacing the battery  
Basic operations  
[DNPP] button  
Enters and cancels the <DNPP (Disc Name Preset  
Play)> (page 26) mode.  
Use two "AA"-size batteries.  
[VOL.] buttons  
Adjusting the volume.  
Slide the cover while pressing downwards to  
remove it as illustrated.  
[SRC] button  
Each time the button is pressed the source  
switches.  
For the source switching order refer to <Selecting  
the Source> (page 10).  
[0] — [9] buttons  
Insert the batteries with the + and – poles aligned  
properly, following the illustration inside the case.  
When in <Direct Track/File Search> (page 25) and  
<Direct Disc Search> (page 25), enter the track/  
file/disc number.  
[ATT] button  
Turning the volume down quickly.  
When it is pressed again it returns to the previous  
level.  
In HD Radio source  
[FM] button  
Select the band.  
2WARNING  
Each time the [FM] button is pressed it switches  
between the HF1, HF2, and HF3 bands.  
Store unused batteries out of the reach of children.  
Contact a doctor immediately if the battery is  
accidentally swallowed.  
[AM] button  
Select the HA band.  
[4]/ [¢] buttons  
Tune up or down band.  
Do not set the remote on hot places such as above  
the dashboard.  
[0] — [9] buttons  
Press buttons [1] — [6] to recall preset stations.  
|
English  
|
34  
English  
35  
Accessories/ Installation Procedure  
Connecting Wires to Terminals  
Ez900HDS/Ez700SR  
Aux input  
Rear output  
Front output  
Subwoofer output  
Accessories  
Installation Procedure  
Left output (White), Right output (Red)  
A
B
C
D
See next page for Mounting  
the SIRIUS Antenna.  
Sirius antenna  
1. To prevent a short circuit, remove the key from  
the ignition and disconnect the - battery.  
2. Make the proper input and output wire  
connections for each unit.  
3. Connect the speaker wires of the wiring harness.  
4. Connect the wiring harness wires in the  
following order: ground, battery, ignition.  
5. Connect the wiring harness connector to the  
unit.  
6. Install the unit in your car.  
7. Reconnect the - battery.  
8. Press the reset button.  
1
A
B
(Accessory8)  
• Do not bend Sirius  
antenna input code  
strongly.  
• Connection part is  
fixed on vinyl tape so  
that Sirius antenna is  
does not come out.  
Sirius antenna input  
..........1  
C
2
D
To KENWOOD disc changer/  
External optional accessory  
To connect these leads, refer to  
the relevant instruction manuals.  
..........2  
FM/AM antenna input  
Fuse (10A)  
3
If no connections are made, do not let the wire come out  
from the tab.  
2WARNING  
Wiring harness  
(Accessory1)  
If you connect the ignition wire (red) and the battery wire  
(yellow) to the car chassis (ground), you may cause a short  
circuit, that in turn may start a fire. Always connect those  
wires to the power source running through the fuse box.  
..........4  
When using the optional power amplifier, connect  
to its power control terminal.  
P.CONT  
Power control wire (Blue/White)  
Motor antenna control wire (Blue)  
Depending on what antenna you are using, connect  
either to the control terminal of the motor antenna, or to  
the power terminal for the booster amplifier of the film-  
type antenna.  
Connect to the terminal that is grounded when either  
the telephone rings or during conversation.  
To connect the KENWOOD navigation system,  
consult your navigation manual.  
4
ANT  
CONT  
If your car’s ignition does not have an ACC position,  
connect the ignition wires to a power source that can be  
turned on and off with the ignition key. If you connect  
the ignition wire to a power source with a constant  
voltage supply, as with battery wires, the battery may die.  
If the console has a lid, make sure to install the unit so  
that the faceplate will not hit the lid when closing and  
opening.  
If the fuse blows, first make sure the wires aren’t touching  
to cause a short circuit, then replace the old fuse with  
one with the same rating.  
Insulate unconnected wires with vinyl tape or other  
similar material. To prevent a short circuit, do not remove  
the caps on the ends of the unconnected wires or the  
terminals.  
Connect the speaker wires correctly to the terminals to  
which they correspond. The unit may be damaged or fail  
to work if you share the - wires or ground them to any  
metal part in the car.  
When only two speakers are being connected to the  
system, connect the connectors either to both the front  
output terminals or to both the rear output terminals  
(do not mix front and rear). For example, if you connect  
the + connector of the left speaker to a front output  
terminal, do not connect the - connector to a rear  
output terminal.  
..........4  
MUTE  
TEL mute wire (Brown)  
5
6
7
8
To "EXT.AMP.CONT." terminal of the amplifier having the  
external amp control function.  
External amplifier control wire  
(Pink / Black)  
To car light control switch  
To front left speaker  
To front right speaker  
To rear left speaker  
..........1  
..........1  
..........2  
..........1  
Dimmer control wire (Orange / White)  
White/Black  
White  
FRONT  
FRONT  
REAR  
L
Gray/Black  
Gray  
R
Green/Black  
Green  
L
Purple/Black  
Purple  
To rear right speaker  
REAR  
R
Ignition key  
switch  
Car fuse  
box  
Ignition wire (Red)  
ACC  
1
2
Car fuse box  
(Main fuse)  
After the unit is installed, check whether the brake lamps,  
blinkers, wipers, etc. on the car are working properly.  
Mount the unit so that the mounting angle is 30° or less.  
Battery wire (Yellow)  
Ground wire (Black) - (To car chassis)  
3
Battery  
+
|
English  
|
36  
English  
37  
Installation  
Mounting the SIRIUS Antenna  
Japanese cars  
Screwing the Faceplate on the Unit  
The SIRIUS antenna has powerful magnetic  
mounting to hold on place to metal surface. The  
antenna’s tail protects the exposed portion of  
antenna cable from the elements. The tail has  
an adhesive strip that will firmly adhere it to the  
vehicle.  
It is important that the insulation on the SIRIUS antenna  
cable does not become cut or nicked during the installa-  
tion produce.  
Do not route or pull the SIRIUS antenna cable against  
sharp edges or around sharp corners.  
If you want to fasten the faceplate to the main  
unit so that it does not fall off.  
1 Refer to the section <Removing the hard rubber  
frame> (page 40) and then remove the hard  
rubber frame.  
2 Align the holes in the unit (two locations on each  
side) with the vehicle mounting bracket and  
secure the unit with the accessory screws.  
1 Refer to the section <Removing the hard rubber  
frame> (page 40) and then remove the hard  
rubber frame.  
8 Route the cable from lowest point of the window  
in to the trunk. Running antenna cable under the  
interior trim that connecting the antenna input  
to the unit.  
2 Drop open the faceplate by pressing the Release  
button.  
1 Find an antenna location on a metal surface al  
least 12"x12" (30.5cm x 30.5cm). Best reception  
is achieved with antenna mounted on the  
roof; mounting on the trunk lid will work for  
convertibles.  
T
3 Tighten the screws (ø2.6 × 12 mm) (Accessory  
N
5) in the holes shown on the diagram.  
T/N  
T
N
SIRIUS antenna installation should be carried out at or  
above room temperature. Colder temperatures could  
affect the curing time antenna tails adhesive. At room  
temperature, maximum adhesion usually occurs within  
72 hours. During this period, car washes and other  
contact with antenna and tail should be avoided. Warmer  
temperatures will also make it easier to route the antenna  
cable around any windows or other obstructions.  
Accessory5  
T: Toyota cars  
N: Nissan cars  
Roof  
6½"  
Rear Window  
Trunk lid  
8 mm  
MAX.  
8mm  
MAX.  
3
4
6½"  
ø5mm  
ø5mm  
Accessory3...for Nissan car  
Accessory4 ...for Toyota car  
non-Japanese cars  
For the best reception, the antenna should be mounted  
exactly 6.5" (16.5cm) away from the vehicle’s rear  
window, so that only the portion of the cable that will be  
protected by the tail is exposed.  
If the vehicle has a roof rack or skid ribs, it may be  
necessary to mount antenna off-center, away from  
obstructions that could interfere with reception.  
Metal mounting strap  
(commercially available)  
During installation, do not use any screws except for  
those provided. The use of different screws might result  
in damage to the main unit.  
Damage may occur if a screwdriver or similar tool is used  
with excessive force during the installations.  
4 Tighten the screws (ø2 × 4 mm) (Accessory 6) in  
the holes shown on the diagram.  
Firewall or metal support  
2 Use the provided alcohol wipe (Accessory8-3) to  
clean the general aria where the antenna and tail  
are to be mounted on the vehicle.  
Accessory6  
3 Place the antenna at the selected location. The  
magnet will adhere it to the vehicle.  
5 Tighten the screws (ø2 × 6 mm) (Accessory 7) in  
4 Dry-fit the antenna tail (Accessory8-1)onto the  
antenna cable, ensuring that the tail fits snugly  
against the antenna housing, and that the  
entire cable properly fit into the recess on the  
underside of the tail.  
5 Remove the protective form one side of the  
adhesive (Accessory8-2) and firmly adhere the  
stripe to the bottom of the tail, attaching it to the  
antenna cable.  
6 Remove the protective form other side of the  
adhesive (Accessory8-2), place the antenna  
housing in the location you have selected and  
firmly adhere the tail to the vehicle.  
7 Route the exposed portion of the antenna cable  
from the end of the tail to the vehicle’s interior  
by tucking it underneath the rubber molding  
around the vehicle’s rear window.  
the holes shown on the diagram.  
Bend the tabs of the  
mounting sleeve with a  
screwdriver or similar utensil  
and attach it in place.  
Accessory7  
Self-tapping screw  
(commercially available)  
Screw (M4X8)  
(commercially available)  
Make sure that the unit is installed securely in place. If  
the unit is unstable, it may malfunction (for example, the  
sound may skip).  
Never insert the screws in any other screw hole than the  
one specified. If you screw them in another hole, it will  
contact and may cause damage to the mechanical parts  
inside the unit.  
|
English  
|
38  
English  
39  
Removing the Unit  
Troubleshooting Guide  
What might seem to be a malfunction in your unit  
may just be the result of slight misoperation or  
miswiring. Before calling service, first check the  
following table for possible problems.  
Removing the hard rubber frame  
Removing the Unit  
? The TEL mute function turns ON even though the  
mute wire is not connected.  
1 Engage the catch pins on the removal tool and  
remove the two locks on the upper level.  
Upper the frame and pull it forward as shown in  
the figure.  
1 Refer to the section <Removing the hard rubber  
frame> (page 40) and then remove the hard  
rubber frame.  
The TEL mute wire is touching a metal part of the  
car.  
Pull the TEL mute wire away from the metal  
part of the car.  
2 Remove the screw (M4 × 8) on the back panel.  
General  
3 Insert the two removal tools deeply into the slots  
? No sound can be heard, or the volume is low.  
The fader or balance settings are set all the way to  
one side.  
? Can't select the source.  
on each side, as shown.  
Can't be selecting the source without SIRIUS.  
Screw (M4X8)  
(commercially available)  
Center the fader and balance settings.  
Subscribe to SIRIUS. Refer to <Activating your  
SIRIUS subscription> (page6).  
Lock  
The input/output wires or wiring harness are  
connected incorrectly.  
Catch  
? The power does not turn ON.  
Reconnect the input/output wires or the  
wiring harness correctly. See the section on  
<Connecting Wires to Terminals>.  
The fuse has blown.  
After checking for short circuits in the wires,  
replace the fuse with one with the same  
rating.  
Accessory2  
Removal tool  
The values of Volume offset are low.  
Turn up the Volume offset, referring to the  
section on <Audio Setup> (page 11).  
2 When the upper level is removed, remove the  
The speaker wire has a short-circuit or touches  
the chassis of the vehicle, and then the protection  
function is activated.  
lower two locations.  
The <Built-in Amp Mute Setting> (page 29) is ON.  
Turn it OFF.  
Wire or insulate the speaker cable properly  
and press the reset button.  
? The sound quality is poor or distorted.  
Accessory2  
Removal tool  
One of the speaker wires is being pinched by a  
screw in the car.  
? There’s a source you can’t switch.  
No subscription is established.  
Check the speaker wiring.  
4 Lower the removal tool toward the bottom, and  
pull out the unit halfway while pressing towards  
the inside.  
Subscribe to SIRIUS. Refer to <Activating your  
SIRIUS subscription> (page6).  
The speakers are not wired correctly.  
Reconnect the speaker wires so that each  
output terminal is connected to a different  
speaker.  
There’s no media inserted.  
Set the media you want to listen to. If there’s  
no media in this unit, you can’t switch to each  
source.  
? The Touch Sensor Tone doesn’t sound.  
The preout jack is being used.  
The Disc changer isn’t connected.  
The Touch Sensor Tone can’t be output from  
the preout jack.  
Connect the Disc changer. If the Disc changer  
isn’t connected to it’s input terminal, You can’t  
switch to an external disc source.  
The frame can be removed from the bottom side in the  
same manner.  
? The Dimmer function doesn’t work.  
The Dimmer wire isn’t connected correctly.  
Check the Dimmer wire connection.  
The <Dimmer> (page 29) is OFF.  
Turn it ON.  
? The memory is erased when the ignition is  
turned OFF.  
The ignition and battery wire are incorrectly  
connected.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
Be careful to avoid injury from the catch pins on the  
removal tool.  
Tuner source  
? There’s no loudness effect.  
You’re using Subwoofer preout.  
Loudness has no effect in Subwoofer preout.  
5 Pull the unit all the way out with your hands,  
? Radio reception is poor.  
The car antenna is not extended.  
being careful not to drop it.  
Pull the antenna out all the way.  
The antenna control wire is not connected.  
? Even if Loudness is turned ON, high-pitched tone  
isn’t compensated for.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
Tuner source is selected.  
High-pitched tone isn’t compensated for when  
in Tuner source.  
? The desired frequency can’t be entered with the  
Direct Access Tuning.  
A station that can’t be received is being entered.  
? The TEL mute function does not work.  
The TEL mute wire is not connected properly.  
Enter a station that can be received.  
You’re trying to enter a frequency with a 0.01 MHz  
unit.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
What can be designated in the FM band is to  
0.1 MHz.  
|
English  
|
40  
English  
41  
Troubleshooting Guide  
NO ACCESS:  
Waiting :  
After setting it in the Disc Changer, DNPP  
was done without having it been played at  
least 1 time.  
Disc source  
The messages shown below display your  
systems condition.  
? The MP3/WMA track time isn’t displayed  
correctly.  
? "AUX EXT" is displayed without achieving  
---  
External disc control mode.  
EJECT:  
No disc magazine has been loaded in  
the changer. The disc magazine is not  
completely loaded.  
There are times when it isn’t displayed  
correctly according to the MP3/WMA  
recording conditions.  
HD Radio text data is being received.  
Unsupported disc changer is connected.  
Use the disc changer mentioned in the  
<About CD players/disc changers connected  
to this unit> (page 4) of the section on <Safety  
precautions>.  
"IN" indicator is blink (page 23):  
The CD player section is not operating  
Load the disc magazine properly.  
No CD in the unit.  
Insert the CD.  
properly.  
HD Radio source  
Reinsert the CD. If the CD cannot be  
ejected or the display continues to flash  
even when the CD has been properly  
reinserted, please switch off the power  
and consult your nearest service center.  
? No sound can be heard, or the volume is low.  
? The specified disc does not play, but another one  
plays instead.  
No Disc:  
No disc has been loaded in the disc  
magazine.  
The preset broadcast station is not transmitting  
in the mode that was set with <Receive mode  
Setting> (page 30).  
The specified CD is quite dirty.  
Load a disc into the disc magazine.  
Clean the CD.  
Please set <Receive mode Setting> to "Auto".  
TOC Error:  
No disc has been loaded in the disc  
magazine.  
The disc is loaded in a different slot from that  
specified.  
Unsupported : A MP3/WMA is played with a format that  
In digital AM broadcasting, receive mode switches  
between stereo and monaural too often.  
this unit can’t support.  
----  
Load a disc into the disc magazine.  
The CD is quite dirty. The CD is upside-  
down. The CD is scratched a lot.  
Clean the CD and load it correctly.  
Eject the disc magazine and check the  
number for the specified disc.  
Receiving condition is bad or unstable.  
Stereo is chosen when receiving condition is  
good, and it switches to monaural when the  
condition becomes bad.  
The disc is severely scratched.  
Try another disc instead.  
Protected :  
A copy-protected file is played.  
----  
E-05:  
The CD is upside-down.  
Load the CD correctly.  
In digital broadcasting, receive mode switches  
between "DIGITAL" and "ANALOG" too often.  
? Can’t remove disc.  
The cause is that more than 10 minutes has  
ANT ERROR : SIRIUS Antenna is not connected.  
Make sure the antenna is connected  
correctly and then turn ON/OFF of the  
unit.  
Receiving condition is bad or unstable.  
elapsed since the vehicle ACC switch was turned  
OFF.  
Blank Disc:  
No Track:  
Nothing has been recorded on the MD.  
<Receive mode Setting> (page 30) is chosen  
the "Analog" when receiving condition is bad.  
HD Radio tuner is connected to KCA-S210A or  
other units (Ez700SR).  
The disc can only be removed within 10  
minutes of the ACC switch being turned OFF.  
If more than 10 minutes has elapsed, turn  
the ACC switch ON again and press the Eject  
button.  
No tracks are recorded on the MD,  
although it has a title.  
TUNER ERROR : Broadcast (SIRIUS) cannot be received due  
to an error in this unit.  
Connect the HD Radio tuner directly to the  
control unit.  
Turn ON/OFF of the unit or press the  
reset button of the unit.  
Make sure the antenna is connected  
correctly and then turn ON/OFF of the  
unit.  
No Panel:  
E-77:  
The faceplate of the slave unit being  
connected to this unit has been removed.  
Replace it.  
? Radio reception is poor  
? The disc won’t insert.  
There’s already another disc inserted.  
Press the [0] button and remove the disc.  
The car antenna is not extended.  
Pull the antenna out all the way.  
The antenna control wire is not connected.  
The unit is malfunctioning for some reason.  
Press the reset button on the unit. If the  
"E-77" code does not disappear, consult  
your nearest service center.  
ESN ERROR :  
ESN (SIRIUS) is not registerd in tis unit.  
Turn ON/OFF of the unit or press the  
reset button of the unit.  
? Direct Search can’t be done.  
Another function is ON.  
Turn Random Play or other functions OFF.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
Mecha Error: Something is wrong with the disc  
magazine. Or the unit is malfunctioning for  
some reason.  
LOCKED CHANNEL : Choose the Lock Channels Broadcast  
(SIRIUS)  
SIRIUS source  
? Track Search can’t be done.  
For the discs/folders first or last song.  
Input the Lock Code or Choose  
the without Lock Channels.  
If you use this for the first time, it may be  
difficult to receive signals in the beginning. In  
such a case, leave the SIRIUS source ON for 3  
minutes and turn it OFF and ON.  
Check the disc magazine. And then  
press the reset button on the unit. If the  
"Mecha Error" code does not disappear,  
consult your nearest service center.  
For each disc/folder, Track Search can’t be  
done in the backward direction for the first  
song or in the forward direction for the last  
song.  
INVALID CHANNEL : The invalid channel was chosen  
(SIRIUS).  
Choose another Channels.  
Hold Error:  
The protective circuit in the unit activates  
when the temperature inside the  
automatic disc changer exceeds 60°C  
(140°F), stopping all operation.  
Cool down the unit by opening  
the windows or turning on the air  
conditioner. As the temperature falls  
below 60°C (140°F), the disc will start  
playing again.  
? No broadcast can be received.  
MP3/WMA source  
Updating Channels : Channel information was updated  
The Sirius antenna in not connected.  
(SIRIUS).  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
? Cannot play an MP3/WMA.  
Leave the SIRIUS source ON for 3  
minutes.  
The media is scratched or dirty.  
No subscription is established.  
Clean the media, referring to the CD cleaning  
of the section on <About CDs> (page 7).  
Subscribe to SIRIUS. Refer to <Activating your  
SIRIUS subscription> (page6).  
Subscription Updated : The subscription information  
(subscription, cancellation) was  
updated (SIRIUS).  
? The sound skips when an MP3/WMA is being  
played.  
Leave the SIRIUS source ON for 3  
minutes.  
The media is scratched or dirty.  
NO NAME:  
Attempted to display DNPS during the CD  
play having no disc names preset.  
Clean the media, referring to the CD cleaning  
of the section on <About CDs> (page 7).  
The recording condition is bad.  
Record the media again or use another media.  
Load:  
Discs are being exchanged in the Disc  
changer.  
Reading:  
The unit is reading the data on the disc.  
|
English  
|
42  
English  
43  
Specifications  
Specifications subject to change without notice.  
D/A Converter  
: 1 Bit  
Spindle speed  
: 500 – 200 rpm (CLV)  
Wow & Flutter  
: Below Measurable Limit  
Frequency response ( 1 dB)  
: 10 Hz – 20 kHz  
Total harmonic distortion (1 kHz)  
: 0.01 %  
Signal to Noise ratio (1 kHz)  
: 105 dB  
Dynamic range  
: 93 dB  
Channel separation  
: 96 dB  
Analog FM tuner section  
Frequency range (200 kHz space)  
: 87.9 MHz – 107.9 MHz  
Usable sensitivity (S/N = 30dB)  
: 9.3dBf (0.8 µV/75 Ω)  
Quieting Sensitivity (S/N = 50dB)  
: 15.2dBf (1.6 µV/75 Ω)  
Frequency response ( 3 dB)  
: 30 Hz – 15 kHz  
Signal to Noise ratio (MONO): 70 dB  
Selectivity ( 400 kHz): 80 dB  
Stereo separation (1 kHz): 40 dB  
Digital FM tuner section (Ez900HDS)  
Frequency range (200 kHz space)  
: 87.9 MHz – 107.9 MHz  
Frequency response ( 3 dB)  
: 30 Hz – 15 kHz  
MP3 decode  
: Compliant with MPEG-1/2 Audio Layer-3  
WMA decode  
: Compliant with Windows Media Audio  
Signal to Noise ratio (STEREO): 85 dB  
Analog AM tuner section  
Frequency range (10 kHz space)  
: 530 kHz – 1700 kHz  
Audio section  
Maximum output power  
: 50 W x 4  
Full Bandwidth Power (at less than 1% THD)  
: 22 W x 4  
Tone action  
Bass : 100 Hz 10 dB  
Middle : 1 kHz 10 dB  
Treble : 10 kHz 10 dB  
Usable sensitivity (S/N = 20dB): 28 dBµ (25 µV)  
Digital AM tuner section (Ez900HDS)  
Frequency range (10 kHz space)  
: 530 kHz – 1700 kHz  
Frequency response ( 3 dB)  
: 30 Hz – 15 kHz  
Preout level / Load (during disc play)  
: 2000 mV/10 kΩ  
Signal to Noise ratio (STEREO): 70 dB  
Preout impedance  
: ≤ 600 Ω  
Sirius tuner section  
Frequency range (Overall): 2320MHz–2332.5MHz  
Frequency range (TDM Channel#1(fc))  
: 2322.293MHz  
Frequency range (COFDM Channel#1(fc))  
: 2326.25MHz  
Frequency range (TDM Channel#2(fc))  
: 2330.207MHz  
Usable sensitivity (TDM Channel)  
: -91dBµ – -55dBµ  
Auxiliary input  
Frequency response ( 1 dB)  
: 20 Hz – 20 kHz  
Input Maximum Voltage  
: 1200 mV  
Input Impedance  
: 100 kΩ  
Usable sensitivity (COFDM Channel)  
: -88dBµ – +4dBµ  
Audio Sampling: 48KHz  
General  
Operating voltage (11 – 16V allowable)  
: 14.4 V  
Current consumption  
CD player section  
Laser diode  
: GaAlAs  
Digital filter (D/A)  
: 8 Times Over Sampling  
: 10 A  
Installation Size (W x H x D)  
: 178 x 50 x 165 mm  
7 x 1-15/16 x 6-1/2 inch  
Weight  
: 3.1 lbs (1.4 kg)  
|
English  
|
44  
English  
45  

Rockford Fosgate RFB 1082 User Manual
Radio Shack PLWV104 2R User Manual
Pelco Camera Accessories PT570 User Manual
Panasonic Palmcorder PV DV402 User Manual
Panasonic CQ C1401U User Manual
Panasonic Cordless Phone With Answering Machine KX TG7622 User Manual
Kenwood KDC C705 User Manual
Kenwood Car Stereo System krc 669 User Manual
Jwin JC CD260 User Manual
JVC GZ MG57E User Manual