JVC KD SH99 User Manual

CD RECEIVER

KD-SH99

RECEPTOR CON CD

RECEPTEUR CD

ATT

ANGLE

DAB

DISC

PRESET

DISC

AUX

SEL

VOLUME

RM-RK100

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

For customer Use:

Enter below the Model No. and

Serial No. which are located on

the top or bottom of the cabinet.

Retain this information for future

reference.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

Model No.

Serial No.

LVT0654-001A

[J]

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ...............................

SOUND ADJUSTMENTS .................. 21

Adjusting the sound ................................. 21

Reinforcing the bass sound ...................... 21

Selecting preset sound modes ................. 22

Storing your own sound adjustments ....... 23

LOCATION OF THE BUTTONS............

Control panel ...........................................

Remote controller ....................................

Preparing the remote controller ................

OTHER MAIN FUNCTIONS ............... 24

Setting the clock ...................................... 24

Changing the general settings (PSM) ...... 24

Assigning names to the sources .............. 28

Changing the control panel angle............. 29

Detaching the control panel...................... 30

BASIC OPERATIONS ......................

RADIO BASIC OPERATIONS .............

Listening to the radio ................................

Storing stations in memory .......................

Tuning into a preset station ...................... 10

EXTERNAL COMPONENT OPERATIONS.. 31

CD OPERATIONS .......................... 11

Playing a CD ............................................ 11

Locating a track or particular portion

Playing external components ................... 31

CD CHANGER OPERATIONS ............. 33

Playing CDs ............................................. 33

Selecting CD playback modes.................. 34

on a CD ................................................. 12

Selecting CD playback modes.................. 12

Playing a CD Text .................................... 13

Prohibiting disc ejection ............................ 13

ADDITIONAL INFORMATION............. 35

TROUBLESHOOTING...................... 36

MP3 INTRODUCTION ..................... 14

What is MP3? .......................................... 14

How are MP3 files recorded and

MAINTENANCE ............................ 38

Handling discs ......................................... 38

played back? ......................................... 14

SPECIFICATIONS .......................... 39

MP3 OPERATIONS ........................ 16

Playing an MP3 disc ................................. 16

Locating a file or particular portion

on an MP3 disc ..................................... 17

Selecting MP3 playback modes ............... 20

About the demonstration mode (DEMO MODE)...

When shipped from the factory, “DEMO MODE” is set to “DEMO ON” in this unit.

The following demonstration, introducing the main features equipped with this unit, will appear on the

display automatically if no sound comes in for 3 minutes. (See page 27.)

• MP3

: (Enables you to play MP3 discs.)

• 24bit DAC

: (24 bit digital-analog converter: Gives you a high quality sound after D/A

conversion.)

• HS TUNER

: (High-sensitivity Tuner: Enables a fine reception of stations.)

• EQUALIZER : (Enables you to fine-adjust the sound to match your preference.)

• SUB WOOFER: (Enables you to connect a subwoofer and to adjust its output level.)

CAUTION on Volume Setting

CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for

example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the

volume before playing a disc and adjust it as required during playback.

LOCATION OF THE BUTTONS

Control panel

1 0 (eject) button

2 Control dial

q MP3 INPUT jack

(control panel release) button

3 SEL (select) button

e Remote sensor

4 EQ (equalization) button

r Number buttons

5 S.BASS (S) (super bass) button

6 DISP (D) (display) button

7 BAND (B) button

• MO (monaural) button

• LO (local) button

• INT (intro scan) button

• RPT (repeat) button

• RND (random) button

8 MODE (M) button

4/¢

buttons

• DVD/Video component operation buttons

t SOURCE (standby/on) button

y Reset button

•

Also function as SSM buttons when pressed

together.

ATT (angle/attenuator) button

How to use MODE (M):

If you press MODE (M), this button functions as the Mode button and the unit goes into functions

mode whereby the number buttons and 4/¢ buttons work as different function buttons.

Normally

Equalizing

pattern indicator

During

functions mode

Time countdown

indicator

To use these buttons as number buttons and 4/¢ buttons again after pressing MODE (M),

wait for 5 seconds without pressing any number button until the functions mode is cleared.

• Pressing MODE (M) again also clears the functions mode.

4 Selects the sound modes.

Each time you press the button, sound modes

change.

Remote controller

5 • Searches for stations while listening to the

radio.

ATT

• Fast-forwards or reverses the track/file if

pressed and held while listening to any disc.

• Skips to the beginning of the next track/file or

goes back to the beginning of the current (or

previous) track/file if pressed briefly while

listening to any disc. (See pages 12 and 17.)

ANGLE

DAB

DISC

6 • Changes the preset channel number while

listening to the radio.

PRESET

R D

Each time you press the button, the preset

channel number changes, and the selected

station is tuned into.

• Skips to the first file of the next directory or

the first file of the previous directory if

pressed and held while listening to an MP3

disc. (See page 18.)

• Skips to the first file of the next directory or

the first file of the previous directory of the

same hierarchy level if pressed briefly while

listening to an MP3 disc. (See page 19.)

DISC

AUX

SEL

VOLUME

RM-RK100

7 • Changes the disc number while listening to

the CD changer.

1 • Turns on the unit if pressed when the unit

is turned off.

Each time you press the button, the disc

number changes, and the selected disc

starts playing.

• Skips to the first file of a directory of an upper

hierarchy level or a lower hierarchy level if

pressed briefly while listening to an MP3 disc.

(See page 19.)

• Turns off the unit if pressed and held until

“SEE YOU” appears on the display.

• Drops the volume level if pressed briefly,

and “ATT” flashes on the display.

Press again to resume the volume.

2 • CD : Selects CD player.

• FM : Selects FM tuner.

8 Skips to the root directory while listening to an

MP3 disc. (See page 19.)

Each time you press the button, FM

band (FM1, FM2 and FM3) changes.

9** Selects the sound adjustment items.

Each time you press the button, the items

change.

•

Does not function as the DAB button.

• AM : Selects AM tuner.

• CH : Selects CD changer.*

• AUX : Selects the external components.

Each time you press the button,

“AUX INPUT” and “LINE INPUT” are

alternately selected.

p** • Changes the volume.

• Adjusts the sound mode (after SEL is

pressed).

Without connecting the CD changer, you cannot

select it as the source to play.

3 Changes the angle of the control panel to

four positions.

** These buttons do not function for the preferred

setting mode adjustment.

2. Place the battery.

Preparing the remote controller

Slide the battery into the holder with the + side

facing upwards so that the battery is fixed in

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no

obstacle in between.

the holder.

Lithium coin battery

(product number:

CR2025)

3. Return the battery holder.

Insert again the battery holder pushing it until

you hear a clicking sound.

Remote sensor

(back side)

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of the

remote controller decreases, replace the battery.

WARNING:

• Store the battery in a place where children cannot

1. Remove the battery holder.

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point

pen or a similar tool.

reach.

If a child accidentally swallows the battery,

consult a doctor immediately.

• Do not recharge, short, disassemble, heat or

dispose the battery in a fire.

2) Remove the battery holder.

Doing any of these things may cause the battery to

give off heat, crack or start a fire.

• Do not leave the battery with other metallic

materials.

Doing this may cause the battery to give off heat,

crack or start a fire.

(back side)

• When throwing away or saving the battery, wrap it

in tape and insulate; otherwise, the battery may

start to give off heat, crack or start a fire.

• Do not poke the battery with tweezers or similar

tools.

Doing this may cause the battery to give off heat,

crack or start a fire.

BASIC OPERATIONS

Note:

When you use this unit for

the first time, set the built-in

clock correctly, see page 24.

1 Turn on the power and select the

source.

2 Adjust the volume.

To increase the volume.

When you press the button

for the first time, the power

comes on. Then each time

you press the button, the

source changes as follows:

To decrease the volume.

Volume level appears.

FM TUNER

CD PLAY

CD CHANGER

AM TUNER

AUX INPUT

LINE INPUT

Volume level indicator

If a disc is not in the loading slot, you cannot

select CD as the source to play.

Note:

After adjusting the volume, you can push in the

control dial to avoid unintended operations.

To use it again, push the control dial again to

make it come out.

** Without connecting the CD changer, you

cannot select it as the source to play.

To operate the tuner (FM or AM),

see pages 8 – 10.

To play a CD,

see pages 11 – 13.

To play an MP3 disc,

3 Adjust the sound as you want.

(See page 21.)

see pages 16 – 20.

To operate external components

(AUX INPUT and LINE INPUT),

see pages 31 – 32.

To operate the CD changer,

see pages 33 – 34.

To drop the volume in a moment

Press and hold

/ATT while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press and

hold the button again.

• If you turn the control dial clockwise, you can

also restore the sound.

To turn off the power

Press and hold SOURCE

appears on the display.

until “SEE YOU”

RADIO BASIC OPERATIONS

To stop searching before a station is received,

press the same button you have pressed for

searching.

Listening to the radio

You can use either automatic searching or

manual searching to tune into a particular station.

To tune into FM stations only with strong signals

1 Press MODE (M) to enter the functions mode

while listening to an FM broadcast.

2 Press LO (local) while still in the functions

mode, so that the LOCAL indicator lights up on

the display.

This function works only while searching FM

stations, including SSM preset.

Each time you press the button, the LOCAL

indicator lights up and goes off alternately.

Searching a station automatically:

Auto search

1 Select the band (FM1 – 3, AM).

1 Press SOURCE

repeatedly to select the

tuner as the source.

2 If necessary, press

BAND (B) repeatedly to

select FM or AM.

Each time you press the

button, the band changes

as follows:

Searching a station manually:

Manual search

1 Select the band (FM1 – 3, AM).

1 Press SOURCE

FM 1

FM 2

FM 3

repeatedly to select the

tuner as the source.

Selected band appears.

2 If necessary, press

BAND (B) repeatedly to

select FM or AM.

Each time you press the

button, the band

changes as follows:

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

FM 1

FM 2

FM 3

Note:

2 Start searching a station.

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

Press ¢

to search

stations of higher

frequencies.

Press

stations of lower

frequencies.

4 to search

When a station is received, searching stops.

2 Press and hold ¢

4 until

Storing stations in memory

“M” (manual) starts flashing on the

display.

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2 and FM3).

3 Tune into a station you want while “M”

is flashing.

1 Select the FM band (FM1 – 3) you want

to store FM stations into.

1 Press SOURCE

Press ¢

to tune

into stations of higher

frequencies.

repeatedly to select the

tuner as the source.

2 If necessary, press

BAND (B) repeatedly to

select the FM band.

Each time you press the

button, the band changes

as follows:

Press

into stations of lower

frequencies.

4 to tune

• If you release your finger from the button,

the manual mode will automatically turn off

after 5 seconds.

• If you hold down the button, the frequency

keeps changing until you release the

button.

FM 1

FM 2

FM 3

When an FM stereo broadcast is hard to

receive:

2 Press and hold both buttons for more

than 2 seconds.

1 Press MODE (M) to enter the

functions mode while listening to

an FM stereo broadcast.

2 Press MO (monaural) while still in

the functions mode, so that the

MO indicator lights up on the

display.

• Each time you press the button,

the MO and ST (stereo) indicators

light up alternately.

“SSM” appears, then

disappears when automatic

preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2 or FM3).

These stations are preset in the number buttons

— No.1 (lowest frequency) to No.6 (highest

frequency).

Lights up when receiving

an FM broadcast in stereo.

The MO indicator lights

up.

When automatic preset is over, the station stored

in number button 1 will be automatically tuned into.

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved (the ST indicator

goes off).

Manual preset

You can preset up to 6 stations in each band

(FM1, FM2, FM3 and AM) manually.

Tuning into a preset station

You can easily tune into a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on page 9.

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

1 Select the band (FM1 – 3, AM).

1 Press SOURCE

repeatedly to select the

tuner as the source.

1 Press SOURCE

repeatedly to select the

tuner as the source.

2 If necessary, press

BAND (B) repeatedly to

select FM 1.

Each time you press the

button, the band

changes as follows:

2 If necessary, press

BAND (B) repeatedly to

select FM or AM.

Each time you press the

button, the band changes

as follows:

FM 1

FM 2

FM 3

FM 1

FM 2

FM 3

2 Select the number (1 – 6) for the preset

station you want.

2 Tune into a station of 88.3 MHz.

Press ¢

to tune

into stations of higher

frequencies.

Press

into stations of lower

frequencies.

4 to tune

If the sound quality decreases and the

stereo effect is lost while listening to

an FM station...

In some areas, adjacent stations may interfere

with each other. If this interference occurs, this

unit can automatically reduce this interference

noise (the initial setting when shipped from the

factory). However, in this case, the sound

quality will be degraded and the stereo effect

will be also lost.

3 Press and hold the number button (in

this example, 1) for more than 2

seconds.

“P1” flashes for a while.

If you do not want to degrade the sound quality

and to lose the stereo effect, rather than to

eliminate the interference noise, see “To

change the FM tuner selectivity – IF FILTER”

on page 27.

When using this until in an area other than

North or South America:

You need to change the AM/FM channel

intervals. See “To change the AM/FM channel

intervals – AREA” on pages 26 and 27.

4 Repeat the above procedure to store

other stations into other preset

numbers.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example, during

battery replacement). If this occurs, preset the stations

again.

CD OPERATIONS

When playing an MP3 disc, refer also to

“MP3 OPERATIONS” on pages 16 to 20.

Notes:

• When a disc is in the loading slot, selecting “CD”

as the source by pressing SOURCE

play.

starts CD

Playing a CD

• When a disc is inserted upside down, the disc

automatically ejects.

1 Open the loading slot.

The control panel moves down,

and the loading slot appears.

• When you play a CD Text, the disc title and

performer appear on the display. Then the current

track title appears on the display, followed by the

track number and elapsed playing time. See also

“Playing a CD Text” (page 13) and “To select the

scroll mode – SCROLL” (page 26).

Note:

When an external component is connected to the MP3

INPUT jack, be careful of handling a CD.

If a CD Text includes too much text information, some

may not appear on the display.

• If you change the source, CD play also stops (without

ejecting the disc).

2 Insert a disc into the loading slot.

The unit draws the

disc, the control panel

goes back to its

previous position (see

page 29), and CD play

starts automatically.

To stop play and eject the disc

Press 0.

CD play stops, the control panel moves down, and

the disc automatically ejects from the loading slot.

To return the control panel to its previous

position, press 0 again.

• All the tracks on the

disc will be played

repeatedly until you

stop playback—All

Track Repeat Play.

• If you keep the loading slot open for one minute

(or 30 seconds when you have ejected a disc with

the ignition key turned to “OFF”), a beep sounds

and the control panel returns to its previous

position.

Note:

Do not insert any 8 cm disc into the loading slot as it

will get stuck inside.

Be careful not to get the disc or your finger

caught in between the control panel and the unit.

The display changes to show the following:

Note:

If the ejected disc is not removed within 15 seconds, the

disc is automatically inserted again into the loading slot

to protect it from dust. (CD play will not start this time.)

Total track

Total playing time of

number of the the inserted disc

inserted disc

Current track

Elapsed playing time

Selecting CD playback modes

Locating a track or particular

portion on a CD

To play back tracks at random (Random Play)

1 Press MODE (M) while

playing a disc. The unit enters

the functions mode.

2 Press RND (random) while still

in the functions mode, so that

the RND indicator lights up on

the display.

Then, each time you press

RND, the random play mode

turns on and off alternately.

To fast-forward or reverse the track

Press and hold ¢

while playing a disc, to

fast-forward the track.

Press and hold

while playing a disc, to

reverse the track.

To go to the next track or the previous tracks

Press ¢

briefly while

playing a disc, to go ahead

to the beginning of the next

track. Each time you press

the button consecutively, the

beginning of the next track is

located and played back.

When the random mode is turned on, the RND

indicator lights up on the display and a track

randomly selected starts playing.

To play back the current track repeatedly

(One Track Repeat Play)

Press

4 briefly while

playing a disc, to go back to

the beginning of the current

track. Each time you press

the button consecutively, the

beginning of the previous

tracks is located and played

back.

1 Press MODE (M) while

playing a disc. The unit enters

the functions mode.

2 Press RPT (repeat) while still

in the functions mode, so that

the RPT indicator lights up on

the display.

Then, each time you press

RPT, the One Track Repeat

Play mode turns on and off

alternately.

To go to a particular track directly

Press the number button corresponding to the track

number to start its playback.

• When One Track Repeat

Play is turned off, All Track

Repeat Play is activated.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

Elapsed playing time

Track number

To play back only intros (Intro scan)

You can play back the first 15 seconds of each

track sequentially.

Prohibiting disc ejection

You can prohibit disc ejection and can lock a disc

in the loading slot.

1 Press MODE (M) while

playing a disc. The unit enters

the functions mode.

2 Press INT (intro scan) while still

in the functions mode, so that

the “INT”appears on the display.

Then, each time you press INT,

the intro scan play mode turns

on and off alternately.

While pressing SEL (select),

press and hold 0 for more than 2

seconds.

“NO EJECT” flashes on the

display for about 5 seconds, and

the disc is locked and cannot be

ejected.

Track number of the

currently playing track

Note:

If you press 0 while disc ejection is prohibited, the

control panel moves down, but the disc cannot be

ejected.

To return the display panel to its previous position,

press 0.

Playing a CD Text

In a CD Text, some information about the disc (its

disc title, performer and track title) is recorded.

You can show these disc information on the

display.

To cancel the prohibition and unlock the disc,

press and hold 0 for more than 2 seconds again,

while pressing SEL.

“EJECT OK” flashes on the display for about 5

seconds, and the disc is unlocked.

1 Select text display mode while

playing a CD Text.

Each time you press the button,

the display changes as follows:

Disc Title / Performer

Current track no.

and Elapsed playing time

Track Title

Notes:

• The display shows up to 10 characters at one time

and scrolls if there are more than 10 characters.

See also “To select the scroll mode – SCROLL” on

page 26.

• When you press DISP (D) while playing a

conventional CD, “NO NAME” appears for the disc

title/performer and the track title.

MP3 INTRODUCTION

What is MP3?

How are MP3 files recorded

and played back?

MP3 is an abbreviation of Motion Picture Experts

Group (or MPEG) Audio Layer 3. MP3 is simply a

file format with a data compression ratio of 1:10

(128 Kbps*). That means, by using MP3 format,

one CD-R or CD-RW can contain 10 times as

much data volume as a regular CD can.

MP3 “files (tracks)” can be recorded in

“directories (folders)”—in PC terminology.

During recording, the files and directories can be

arranged in a way similar to arranging files and

directories/folders of computer data.

“Root” is similar to the root of a tree. Every file

and directory can be linked to and be accessed

from the root.

In compliance with ISO 9660, the maximum

allowable depth of nested directories—so-called

“hierarchy”—is eight (inclusive of the root

directory).

*Bit rate is the average number of bits that one second of

audio data will consume.The unit used is Kbps (1000 bits/

second).To get a better audio quality, choose a higher bit

rate. The most popular bit rate for encoding is 128 Kbps.

This unit is incorporated with an MP3 decoder.

You can play back MP3 files (tracks) recorded on

CD-Rs, CD-RWs, and CD-ROMs.

Playback order, file search order, and directory

search order of the MP3 files recorded on a disc

are determined by the writing (or encoding)

application; therefore, playback order may be

different from the one you have intended while

recording the directories and the files.

Compatible with ID3v1

Extra information data such as album title, performer

name, song title, recording year, music genre and a

brief comment can be stored within an MP3 file.

This unit can show ID3v1 tags (album name,

performer name and song title) on the display.

• Some characters cannot be shown correctly.

• This unit is not compatible with ID3v2.

The illustration on the next page shows an

example of how MP3 files are recorded on a

CD-R or CD-RW, how they are played back, and

how they are searched on this unit.

Other Main Features in this unit:

• Maximum number of hierarchy levels:8

• Maximum number of directories/files: 255

(Total)

• Available characters: A–Z, 0–9, _ (underscore)

• Maximum number of characters for file name

(ISO 9660 Level 1): 12 (inclusive of

separation mark—“.” and

Notes:

• The unit can read a CD-ROM containing MP3

files. However, if non-MP3 files are recorded

together with MP3 files, this unit will take a longer

time to scan the disc. It may also cause the unit to

malfunction.

• The unit cannot read or play an MP3 file without

the extension code—mp3.

• The unit is not compatible with Playlist**.

extension code—“mp3”)

(ISO 9660 Level 2): 31 (inclusive of

separation mark—“.” and

extension code—“mp3”)

• Maximum number of characters for directory

name: 31

**A playlist is a simple text file, used on a PC, which enables

users to make their own playback order without physically

rearranging the files.

Precautions when recording MP3 files

on a CD-R or CD-RW

This unit can only read MP3 files that are recorded

in the format that is compliant with ISO 9660 Level 1

or Level 2.

MP3 directory/file configuration

ROOT

Notes:

• In compliance with ISO 9660, the maximum number of hierarchy

ROOT

: Root

levels is eight, including the root directory.

• When a multi-session disc is loaded, you can only play back the

contents of the last session.

: Directories

: MP3 files

MP3 playback/search order (page 17)

• The numbers in circles next to the MP3 files ( ) indicate the playback order and search order of

the MP3 files. Normally this unit plays back MP3 files in the recorded order.

• The numbers inside the directories indicate the playback order and search order of the directories

on an MP3 disc. Normally this unit plays back MP3 files in the directories in the recorded order.

Movement between the directories (page 19)

You can move to another directory on the same hierarchy level (e.g. from Directory 3, you can go to

Directory 5 or 9) or on a different hierarchy level (e.g. from Directory 5, you can go to Directory 4 or 6).

MP3 OPERATIONS

Refer also to “CD OPERATIONS” on pages 11 to

13.

Playback starts automatically from the first file

of the first directory once file check is

completed.

Then, the display changes to show the

following:

Playing an MP3 disc

• When “TAG ON” is selected (initial

setting: see page 27)

1 Open the loading slot.

The control panel moves down,

and the loading slot appears.

Album name/performer name (directory

name)* = Track title (file name)* =

Elapsed playing time

2 Insert an MP3 disc into the loading slot.

The unit draws the

* If an MP3 file does not have ID3 tags,

directory name and file name appear.

disc, the control panel

goes back to its

previous position (see

page 29), and

• When “TAG OFF” is selected

Directory name and file name appear.

playback starts

automatically.

Notes:

• All the files on the disc will be played repeatedly

until you stop playback—All File Repeat Play.

• MP3 discs require a longer readout time**.

(It differs due to the complexity of the directory/file

configuration.)

**Readout time is the time taken by the unit to scan or

check the disc for files and file information.

Ex.: When the disc contains 13 directories and

125 MP3 files.

To change the display information

Locating a file or particular

portion on an MP3 disc

While playing back an MP3 file, you

can change the file information

shown on the display.

To fast-forward or reverse the file

Each time you press DISP (D), the

display changes to show the

following:

Press and hold ¢

while playing an MP3 disc,

to fast-forward the file.

• When “TAG ON” is selected (initial

setting: see page 27)

Press and hold

while playing an MP3 disc,

to reverse the file.

Album name/

Performer name

(Directory name)

Track title

(File name)

Elasped playing time

To skip to the next file or the previous files

* If an MP3 file does not have ID3 tags,

directory name and file name appear.

Press ¢

briefly while

playing, to skip ahead to the

beginning of the next file.

Each time you press the

button consecutively, the

beginning of the next file is

located and played back.

(See “MP3 playback/search

order” on page 15.)

• When “TAG OFF” is selected

Directory name

Elasped playing time

File name

Note:

• The display shows up to 10 characters at one time

and scrolls if there are more than 10 characters.

See also “To select the scroll mode – SCROLL” on

page 26.

Press

4 briefly, while

playing, to skip back to the

beginning of the current file.

Each time you press the

button consecutively, the

beginning of the previous

files is located and played

back. (See “MP3 playback/

search order” on page 15.)

To stop play and eject the disc

Press 0.

Playback stops, the control panel moves down

and the disc automatically ejects from the loading

slot.

To skip to the next directory—either on

the same hierarchy level or on a different

hierarchy level

To go to a particular directory directly

IMPORTANT:

To directly select the directories using the

number button(s), it is required that directories

are assigned 2 digit numbers at the beginning of

their directory names. (This can only be done

during the recording of CD-Rs or CD-RWs.)

Ex.: If directory name is “01 ABC”

press 1 to go to directory 01 ABC

If directory name is “1 ABC”

On the control panel:

1 Press MODE (M) while

playing an MP3 disc. The unit

enters the functions mode.

2 Press ¢

briefly while

still in the functions mode.

Each time you repeat steps

1 and 2, the next directory is

located (and the first file in

the directory starts playing, if

recorded).

pressing 1 does not work

If directory name is “12 ABC”

press and hold 6 (12) to go to

directory 12 ABC

(See “MP3 playback/search

order” on page 15.)

Press the number button corresponding to the

directory number to start playing the first file in

the selected directory.

On the remote controller:

PRESET

Each time you press and hold

the button consecutively, the

next directory is located (and the

first file in the directory starts

playing, if recorded).

• To select a directory number from 01 – 06:

Press 1 (7) – 6 (12) briefly.

• To select a directory number from 07 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

(See “MP3 playback/search

order” on page 15.)

To skip to the previous directory—either

on the same hierarchy level or on a

different hierarchy level

Notes:

• If “MP3” flashes on the display after you have

selected a directory, it means that the directory does

not contain any MP3 files.

• You cannot directly select a directory with a number

greater than 12.

On the control panel:

1 Press MODE (M) while

playing an MP3 disc. The unit

enters the functions mode.

2 Press

in the functions mode.

4 briefly while still

To select a particular file in a directory, press

Each time you repeat steps

1 and 2, the previous

directory is located (and the

first file in the directory starts

playing, if recorded).

4 after selecting the directory.

(See “MP3 playback/search

order” on page 15.)

On the remote controller:

PRESET

Each time you press and hold

the button consecutively, the

previous directory is located

(and the first file in the directory

starts playing, if recorded).

(See “MP3 playback/search

order” on page 15.)

To skip to the next directory on the same

hierarchy level

To skip to the directories on the lower

hierarchy levels

On the remote controller:

PRESET

Each time you press the button

consecutively, the next directory

on the same hierarchy level is

located (and the first file in the

directory starts playing, if

recorded).

consecutively, a directory on the

DISC

lower hierarchy level is located

(and the first file in the directory

starts playing, if recorded).

Ex.1: While playing an MP3 file in Directory 1

(see the illustration on page 15)

Ex.1: While playing an MP3 file in Directory 4

(see the illustration on page 15)

Ex.2: While playing an MP3 file in Directory 4

(see the illustration on page 15)

Ex.2: While playing an MP3 file in Directory 5

(see the illustration on page 15)

To skip to the directories on the upper

hierarchy levels

To skip to the previous directory on the same

hierarchy level

On the remote controller:

DISC

Each time you press the button

PRESET

Each time you press the button

consecutively, a directory on the

upper hierarchy level is located

(and the first file in the directory

starts playing, if recorded).

consecutively, the previous

directory on the same hierarchy

level is located (and the first file

in the directory starts playing, if

recorded).

Ex.1: While playing an MP3 file in Directory 3

(see the illustration on page 15)

Ex.1: While playing an MP3 file in Directory 4

(see the illustration on page 15)

ROOT

Ex.2: While playing an MP3 file in Directory 5

(see the illustration on page 15)

Ex.2: While playing an MP3 file in Directory 5

(see the illustration on page 15)

ROOT

• If you reach the root, playback will not begin.

•

To go back to the root directly, press R D on

the remote controller.You can go back to the root

from any directory.

• If files are recorded on the first hierarchy level

without putting them into a directory, this unit

starts playing the files.

Note:

If there is no MP3 file in a directory that you have

skipped to, its directory name appears on the display

with “MP3” flashing. If this happens, the unit pauses

automatically.

To play back only intros (Intro scan)

You can play back the first 15 seconds of each file

sequentially.

Selecting MP3 playback modes

To play back files at random (Random Play)

1 Press MODE (M) while

playing an MP3 disc. The unit

enters the functions mode.

2 Press INT (intro scan) while still

in the functions mode, so that

“INT” appears on the display.

1 Press MODE (M) while

playing an MP3 disc. The unit

enters the functions mode.

2 Press RND (random) while

still in the functions mode, so

that the RND indicator lights

up on the display.

Then, each time you press

RND, the random play mode

turns on and off alternately.

Then, each time you press INT,

the intro scan play mode turns

on and off alternately.

File number of the

currently playing file

When the random mode is turned on, the RND

indicator lights up on the display and a file

randomly selected from all the files on the disc

starts playing.

To play back files repeatedly (Repeat Play)

1 Press MODE (M) while

playing an MP3 disc. The unit

enters the functions mode.

2 Press RPT (repeat) while still

in the functions mode, so that

the RPT indicator lights up on

the display.

Then, each time you press

RPT, the repeat play mode

changes as follows:

RPT 1

RPT 2

Canceled

Ex.: When “RPT 1” is selected.

Plays repeatedly

Mode

RPT

Indicator

RPT 1

RPT 2

Lights

The current file (or

specified file).

Flashes

All files of the current

directory (or specified

directory).

SOUND ADJUSTMENTS

Adjusting the sound

Reinforcing the bass sound

You can adjust the sound characteristics to your

preference.

The richness and fullness of the bass sound is

clearly maintained regardless of how low you set

the volume – Super Bass.

1 Select the item you want to adjust.

Each time you press the button,

the adjustable items change as

follows:

• You can also adjust the level of Super Bass.

1 Press S.BASS.

“S.BASS” appears on the

display.

FAD*

BAL

(Fader)

(Balance)

VOL

WOOFER**

(Volume)

(Subwoofer)

2 Adjust Super Bass level from

“S. BASS 00” (min.) to “S. BASS 08”

(max.).

Indication

To do:

Range

FAD*

Adjust the front

and rear speaker

balance.

R06 (Rear only)

F06 (Front only)

To increase the level.

To decrease the level.

BAL

Adjust the left

and right speaker

balance.

L06 (Left only)

R06 (Right only)

WOOFER** Adjust the

subwoofer output

level.

00 (min.)

12 (max.)

VOL

Adjust the volume. 00 (min.)

50 (max.)

If you are using a two-speaker system, set the fader

level to “00.”

Bass level indicator changes

according to the adjusted level.

** This takes effect only when a subwoofer is

connected.

2 Adjust the level.

To increase the level.

To decrease the level.

Note:

Normally, the control dial works as the volume

control. So you do not have to select “VOL” to adjust

the volume level.

Notes:

Selecting preset sound modes

• You can adjust each sound mode to your preference,

and store it in memory.

If you want to adjust and store your original sound

mode, see “Storing your own sound adjustments”

on page 23.

You can select a preset sound mode suitable to

the music genre.

• To adjust the bass reinforcement level temporarily,

see page 21.

1 Press EQ.

The last selected sound mode

is recalled, and it is applied to

the current source.

To store a sound mode separately for

each playback source (EQ Link)

The EQ indicator lights up.

Once you select a sound mode, it is stored in

memory. It will be recalled every time you select

the same source.

A sound mode can be stored for each of the

following sources — FM1, FM2, FM3, AM, CD

and external components.

Ex.: When you have selected “FLAT” previously

2 Select the sound mode you want.

As you turn the control

• See also “Changing the general settings (PSM)”

on page 24.

dial, the sound modes

change as follows:

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢

4 to select “EQ LINK”

(Equalization Link).

FLAT O Hard Rock O R & B*O POP O

JAZZ O DanceMusic O Country O Reggae O

Classic O USER 1 O USER 2 O USER 3 O

(back to the beginning)

3 Turn the control dial clockwise to select “LINK

ON.”

4 Press SEL (select) to finish the setting.

To cancel EQ Link, repeat the same procedure

and select “LINK OFF” by turning the control dial

counterclockwise in step 3.

* Rhythm and Blues

• When “EQ LINK” is set to “LINK ON”

The selected sound mode can be stored in

memory for the current source.

Each time you change to the same source, the

same sound mode is also recalled, and shown

after the source name.

EQ level changes as you select the sound mode.

Ex.: When you select “POP”

• When “EQ LINK” is set to “LINK OFF”

The selected sound mode effect applies to all

the sources selected.

To cancel the sound mode, select “FLAT” in

step 2.

Storing your own sound

adjustments

3 Adjust the selected sound element.

• Refer to the table below for adjusting the

selected sound element.

You can adjust the sound modes to your preference

and store your own adjustments in memory

(USER 1, USER 2 and USER 3).

• There is a time limit in doing the following

procedure. If the setting is canceled before

you finish, start from step 1 again.

4 Repeat steps 2 and 3 to adjust the

1 Press EQ.

other sound elements.

The last selected sound mode

is recalled, and is applied to

the current source.

5 Select one of the user sound modes

(USER 1, USER 2, USER 3).

Ex.: When you have selected “POP” previously

2 Press SEL (select) to select sound

elements to adjust.

Each time you press the

button, the sound elements

change as follows:

Ex.: When you select “USER 2”

LOW FREQ.* = LOW WIDTH = LOW LEVEL =

MID FREQ.* = MID WIDTH = MID LEVEL =

HIGH FREQ.* = HIGH LEVEL =

6 Press EQ to store the adjustments.

(back to the beginning)

FREQ. (LOW, MID, HIGH):

Select the center frequency to adjust.

WIDTH (LOW, MID):

Select the band width level (Q).

LEVEL (LOW, MID, HIGH):

To reset to the factory settings

Repeat the same procedure and reassign the

preset values listed in the table on page 35.

Adjust the enhancement level.

Preset values

Indication

* By pressing ¢

4, you

LOW

MID

HIGH

8 kHz

12 kHz

can directly move as follows:

50 Hz

80 Hz

120 Hz

700 Hz

1 kHz

2 kHz

LOW FREQ.

MID FREQ.

HIGH FREQ.

FREQ.

WIDTH

LEVEL

1 (min.)

4 (max.)

1 (min.)

2 (max.)

–06 (min.) –06 (min.) –06 (min.)

+06 (max.) +06 (max.) +06 (max.)

OTHER MAIN FUNCTIONS

Changing the general settings

Setting the clock

(PSM)

1 Press and hold SEL (select) for more

than 2 seconds so that one of the PSM

items appears on the display.

(See page 25.)

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode)

control.

Basic Procedure

1 Press and hold SEL (select) for more

than 2 seconds so that one of the PSM

items appears on the display.

(See page 25.)

2 Set the hour.

1 Select “CLOCK HOUR” if not shown on

the display.

2 Adjust the hour.

2 Select a PSM item you want to adjust.

(See page 25.)

3 Set the minute.

1 Select “CLOCK MIN.”

2 Adjust the minute.

3 Adjust the PSM item selected.

4 Press SEL (select) to finish the setting.

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Press SEL (select) to finish the setting.

To check the current clock time while the unit

is turned off, press DISP (D) (display).

The power turns on, the clock time is shown for 5

seconds, then the power turns off.

Preferred Setting Mode (PSM) items

Factory-preset See

Set.

settings

page

Counter-

clockwise

Clockwise

Hold.

Select.

Back

Advance

CLOCK HOUR Hour adjustment

1:00

CLOCK MIN

EQ LINK

Minute adjustment

Sound control memory

linkage

LINK OFF

CLOCK ON

LEVEL+EQ

LINK OFF

LINK ON

CLOCK DISP

LEVEL/EQ

Clock display

CLOCK OFF

EQ ONLY

CLOCK ON

LEVEL+EQ

Equalizer/Level indicator

LEVEL ONLY

AUTO

OFF

DIMMER

Dimmer mode

AUTO

BEEP SW

P.AMP SW

CONTRAST

SCROLL

Key-touch tone

Power amplifier switch

Display contrast

Scroll mode

BEEP ON

P.AMP ON

BEEP OFF

P.AMP OFF

BEEP ON

P.AMP ON

CONTRAST 5

ONCE

CONTRAST 1 – CONTRAST 10

ONCE

AUTO

OFF

FREQ LOW

FREQ MID

CUTOFF F

Subwoofer cutoff

frequency

FREQ MID

AREA US

L.ADJ 00

A.ADJ 00

FREQ HIGH

AREA US AREA EU

AREA

Tuner interval

LINE ADJ

Line input level

adjustment

L.ADJ 00 – L.ADJ 05

A.ADJ 00 – A.ADJ 05

AUX ADJ

Auxiliary input level

adjustment

DVD

VCR

KEY SELECT

External key-operation

mode selection

DVD

OFF

IF FILTER

Intermediate frequency

filter

WIDE

AUTO

DEMO OFF

TAG OFF

DEMO ON

TAG ON

DEMO MODE

TAG DISP

Demonstration mode

Tag display

DEMO ON

TAG ON

• Press SEL (select) to finish the setting.

• P. AMP ON: Select this mode when not using

external amplifier(s).

• P. AMP OFF: Select this mode when using

external amplifier(s).

To set the clock display – CLOCK DISP

You can set the clock to be shown on the display

when the unit is turned on.

When shipped from the factory, the clock is set to

be shown on the display.

• CLOCK ON: Clock display is turned on.

• CLOCK OFF: Clock display is turned off.

To adjust the display contrast level

– CONTRAST

You can adjust the display contrast level among 1

(dark) to 10 (bright). When shipped from the

factory, the display contrast level is set at level 5.

To select the level meter – LEVEL/EQ

You can select the level display according to your

preference.

When shipped from the factory, this mode is set to

“LEVEL+EQ.”

To select the scroll mode – SCROLL

You can select the scroll mode for the disc

information if it consists of more than 10

characters.

When shipped from the factory, Auto Scroll mode

is set to “ONCE.”

• EQ ONLY:

Equalizer pattern is displayed.

• LEVEL+EQ: Equalizer pattern is displayed

along with audio level meter.

• LEVEL ONLY: Audio Level meter illuminates

upward and downward from

center.

• ONCE: Scrolls only once.

• AUTO: Repeats the scroll (5-second

intervals in between).

To select the dimmer mode – DIMMER

When you turn on the car headlights, the display

automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer

mode is activated.

• AUTO: Activates Auto Dimmer.

• OFF: Cancels Auto Dimmer.

• OFF:

Cancels Auto Scroll.

Note:

Even if the scroll mode is set to “OFF,” you can scroll

the display by pressing DISP (D) for more than 1

second.

• ON:

Always dims the display.

To select the subwoofer cutoff frequency

– CUTOFF F

When a subwoofer is connected to this unit,

select an appropriate cutoff frequency level for

your subwoofer.

Note:

Auto Dimmer equipped for this unit may not work

correctly on some vehicles, particularly on those having

a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

When shipped from the factory, the subwoofer

cutoff frequency is set to “FREQ MID.”

To turn on/off the key-touch tone – BEEP SW

You can deactivate the key-touch tone if you do

not want it to beep each time you press a button.

When shipped from the factory, the key-touch tone

is activated.

• FREQ LOW: Frequencies higher than 50 Hz

are cut off to the subwoofer.

• FREQ MID: Frequencies higher than 80 Hz

are cut off to the subwoofer.

• FREQ HIGH: Frequencies higher than 120 Hz

are cut off to the subwoofer.

• BEEP ON: Activates the key-touch tone.

• BEEP OFF: Deactivates the key-touch tone.

To change the AM/FM channel intervals

– AREA

When this unit is shipped from the factory, the

channel intervals are set to 10 kHz for AM and

200 kHz for FM (AREA US settings).

You will have to change the channel intervals

when using this unit in an area other than North

America and South America.

To turn on/off the power amplifier switch

– P. AMP SW

You can switch off the built-in amplifier and send

the audio signals only to the external amplifier(s)

to get clear sounds and to prevent internal heat

buildup inside this unit.

When shipped from the factory, the power

amplifier switch is turned on so that the built-in

amplifier works.

• AREA EU:

Select this when using this unit in

an area other than North and

South America. (9 kHz for AM and

50 kHz (for manual tuning) /

100 kHz (for searching) for FM)

Select this when using this unit in

North or South America. (10 kHz

for AM and 200 kHz for FM)

To change the FM tuner selectivity

– IF FILTER

In some areas, adjacent stations may interfere

with each other. If this interference occurs, noise

may be heard. This unit has been preset to

automatically reduce this interference noise

(“AUTO”) when shipped from the factory.

• AREA US:

Note:

• AUTO: When this type of interference occurs,

this unit automatically increases the

tuner selectivity so that interference

noise will be reduced. (But the stereo

effect will also be lost.)

If the channel intervals settings are changed, the names

assigned to the stations will be erased from memory. To

reassign the names, see “Assigning names to the

sources” on pages 28.

• WIDE:

Subject to the interference from

adjacent stations, but sound quality

will not be degraded and the stereo

effect will not be lost.

To adjust the line input level – LINE ADJ

Adjust the line input level properly when an

external component is connected to the LINE IN

plugs.

When shipped from the factory, the line input level

is set at level 00.

If the input level of the connected component is

not high enough, increase the input level properly.

Without adjusting the line input level, you may be

surprised at a loud sound when you change the

source from the external component to another

source.

To turn the demo mode on or off – DEMO MODE

You can turn the demo mode on or off.

When shipped from the factory, “DEMO ON” is

selected.

• DEMO ON: Turns the demo mode on. The

demonstration will start

automatically if no sound comes

in for 3 minutes.

• DEMO OFF: Turns the demo mode off.

To adjust the auxiliary input level

– AUX ADJ

Adjust the auxiliary input level properly when an

external component is connected to the MP3 INPUT

jack.

Note:

If the unit has been reset (and the power is on),

demonstration will start if no sound comes in for about

10 seconds.

When shipped from the factory, the auxiliary input

level is set at level 00.

To turn the tag display on or off – TAG DISP

An MP3 file can contain file information called “ID3

Tag” where its album name, performer, track title,

etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version 1)

and ID3v2 (ID3 Tag version 2). This unit is

compatible only with ID3v1.

When shipped from the factory, “TAG ON” is

selected.

If the input level of the connected component is

not high enough, increase the input level properly.

Without adjusting the line input level, you may be

surprised at a loud sound when you change the

source from the external component to another

source.

To select the target component to operate

through this receiver – KEY SELECT

You can operate either JVC’s DVD player or VCR

through this receiver, by using the number buttons

on the control panel.

• TAG ON: Turns on the ID3 tag display while

playing MP3 files.

* If an MP3 file does not have ID3 tags,

directory and file name appear.

When shipped from the factory, these number

buttons are set to be used for the DVD operations.

To use these number buttons on the control panel

for DVD or VCR operations, see page 32.

Note:

If you change the setting from “TAG

OFF” to “TAG ON” while playing an

MP3 file, the tag display will be

activated when the next file starts

playing.

• TAG OFF: Turns off the ID3 tag display while

playing MP3 files. (Only the directory

name and file name can be shown.)

Assigning names to the sources 3 Select the character set you want while

“

” is flashing.

You can assign names to station frequencies,

CDs and the external components.

After assigning a name, it will appear on the

display when you select the source.

Each time you press the button,

the character set changes as

follows:

Capital letters (

)

Small letters (

)

Sources

Maximum number of

the characters

Numbers and symbols (

)

Station frequencies

up to 10 characters (up to

30 station frequencies

including both FM and AM)

4 Select a character.

About the available

characters, see page 35.

CDs*

up to 32 characters

(up to 40 discs)

External components up to 10 characters

(LINE INPUT and

AUX INPUT)

*You cannot assign a name to a CD Text or an MP3 disc.

5 Move the cursor to the next

(or previous) character position.

1 Select a source you want to assign a

name to.

Each time you press the

6 Repeat steps 3 to 5 until you finish

button, the source changes

as described on page 7.

inputting the name.

7 Finish the procedure while the last

2 Press and hold SEL (select) for

more than 2 seconds while pressing

DISP (D).

selected character is flashing.

To erase the input characters

Insert spaces using the same procedure

described above.

When you select an FM station as the source

Notes:

• When you try to assign a name to the 41st disc,

“NAME FULL” appears on the display. (In this

case, delete unwanted names before assignment.)

• When the CD changer is connected, you can assign

names to discs in the CD changer. These names can

also be shown on the display if you insert the discs

in this unit.

Changing the control panel

angle

CAUTION:

NEVER insert your finger

between the control panel

and the unit, as it may get

caught or hurt.

You can change the angle of the control panel to

four positions.

Adjust the angle to the position you want.

Each time you press the button,

the panel angle changes as

follows:

When using the remote controller

Press ANGLE ∞ repeatedly. Each time you press the button, the control panel changes its angle — Å,

ı, Ç, then Î positions in sequence.

To restore the control panel to its original position

Press ANGLE 5 repeatedly. Each time you press the button, the control panel changes its angle in

reverse — Î, Ç, ı, then Å positions in sequence.

Attaching the control panel

Detaching the control panel

1 Insert the left side of the control panel

You can detach the control panel when leaving

the car.

into the groove on the panel holder.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel:

• Be sure to turn off the power

• Be sure to return the control panel to its

original position

2 Press the right side of the control

panel to fix it to the panel holder.

1 Unlock the control panel.

The control panel

comes out toward you.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

2 Move the control panel to the right,

then pull it out of the unit.

To minimize this possibility, periodically wipe

the connectors with a cotton swab or cloth

moistened with alcohol, being careful not to

damage the connectors.

3 Put the detached control panel into the

provided case.

Connectors

EXTERNAL COMPONENT OPERATIONS

MP3 player, MD player, etc.

MP3 INPUT*

* This MP3 INPUT is not compatible with digital signals.

Playing external components

1 Select the external component (AUX

INPUT or LINE INPUT).

When you select a source,

the power automatically

You can connect two external components to this

unit.

Connect one to the MP3 INPUT jack on the

control panel, and the other to the LINE IN plugs

on the rear.

comes on.

Each time you press the

button, the source changes

as described on page 7.

You can connect a JVC DVD player or VCR

to the LINE IN plugs.

You can operate a JVC DVD player or VCR

through this receiver using the number

buttons on the control panel.

When you operate the VCR, you have to

change the operation mode of the number

buttons from the DVD operation mode to the

VCR operation mode. (See “To select the

target component to operate through this

receiver – KEY SELECT” on page 27.)

AUX INPUT: To select the component

connected to the MP3 INPUT

jack on the control panel

If the input level of the external

components is not high enough, increase

the input level properly.

LINE INPUT: To select the component

connected to the LINE IN plugs

on the rear

Without adjusting the input level, you may be

surprised at a loud sound when you change

the source from the external components to

another. (See “To adjust the line input level –

LINE ADJ” and “To adjust the auxiliary input

level – AUX ADJ” on page 27.)

CONTINUED ON THE NEXT PAGE

When connecting a VCR:

2 Turn on the connected component

Turns on and off the power.

Starts playback.

and start playing the source.

¡: Fast-winds a tape when pressed and

held.

• If connecting a JVC DVD player or VCR,

you can perform the following operations:

1: Rewinds a tape when pressed and held.

Stops playback.

Note:

When you press the above buttons, the display shows

“VCR” and its operation mode (such as 3, 7).

When connecting a DVD player:

Turns on and off the power.

Starts playback.

¡: • Fast-forward the track when pressed

and held.

3 Adjust the volume.

• Skip to the beginning of the next tracks

when pressed briefly.

To increase the level.

1: • Reverses the track when pressed and

held.

To decrease the level.

• Go back to the beginning of the current

track when pressed briefly.

Go back to the beginning of the

previous tracks when pressed

consecutively.

4 Adjust the sound you want.

Stops playback.

(See page 21.)

Note:

When you press the above buttons, the display shows

“DVD” and its operation mode (such as 3, 7).

CD CHANGER OPERATIONS

We recommend that you use one of the CH-X series

with your unit.

To fast-forward or reverse the track

Press and hold ¢

while playing a disc, to

fast-forward the track.

If you have another CD automatic changer, consult

your JVC car audio dealer for connections.

• For example, if your CD automatic changer is one of

the KD-MK series, you need a cord (KS-U15K) for

connecting it to this unit.

Press and hold

while playing a disc, to

reverse the track.

Before operating your CD automatic changer:

• Refer also to the Instructions supplied with your

CD changer.

• If no discs are in the magazine of the CD

changer or the discs are inserted upside down,

“NO DISC” will appear on the display. If this

happens, remove the magazine and set the

discs correctly.

• If “RESET 1” – “RESET 8” appears on the

display, something is wrong with the

connection between this unit and the CD

changer.If this happens, check the connection

and make sure the cords are connected firmly.

Then, press the reset button of the CD

changer.

To go to the next track or the previous tracks

Press ¢

briefly, while

playing a disc, to go ahead

to the beginning of the next

track. Each time you press

the button consecutively, the

beginning of the next track is

located and played back.

Press

4 briefly, while

playing a disc, to go back to

the beginning of the current

track. Each time you press

the button consecutively, the

beginning of the previous

tracks is located and played

back.

Playing CDs

Select the CD automatic changer (CD

CHANGER).

When you select a source,

the power automatically

comes on.

Each time you press the

button, the source changes

as described on page 7.

Disc number

Track number Elapsed playing time

To go to a particular disc directly

To play back tracks repeatedly (Repeat Play)

Press the number button corresponding to the disc

number to start its playback (while the CD changer

is playing).

1 Press MODE (M) while playing

a disc. The unit enters the

functions mode.

2 Press RPT (repeat) while still

in the functions mode, so that

the RPT indicator lights up on

the display.

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

Then, each time you press

RPT, the repeat play mode

changes as follows:

RPT 1

RPT 2

Canceled

Disc number

Plays repeatedly

Mode

RPT

Indicator

RPT 1

RPT 2

Lights

The current track (or

specified track).

Elapsed playing time

Track number

Flashes

All tracks of the current

disc (or specified disc).

Ex.: When disc number 3 is selected

Selecting CD playback modes

To play back only intros (Intro scan)

You can play back the first 15 seconds of each

track sequentially.

To play back tracks at random (Random Play)

1 Press MODE (M) while playing

a disc. The unit enters the

functions mode.

2 Press RND (random) while

still in the functions mode, so

that the RND indicator lights

up on the display.

Then, each time you press

RND, the random play mode

changes as follows:

1 Press MODE (M) while playing

a disc. The unit enters the

functions mode.

2 Press INT (intro scan) while still

in the functions mode, so that

“INT” appears on the display.

Then, each time you press INT,

the intro scan mode changes as

follows:

INT 1

Canceled

INT 2

RND 1

RND 2

Canceled

Plays at random

RND

Indicator

Mode

Indicator

Mode

INT 1

INT 2

Plays the beginnings

(15 seconds)

RND 1

Lights

All tracks of the current

disc, then the tracks of

the next disc and so on.

Track number

flashes

Of all tracks on all

inserted discs.

Disc number Of the first track on

flashes

each inserted disc.

RND 2

Flashes

All tracks of all discs

inserted in the magazine.

ADDITIONAL INFORMATION

Sound modes (preset value settings)

The list below shows the preset value settings for each sound mode.

If you have changed their settings, you can reset to the factory settings by reassigning the

preset values below. (See page 23 for reassignment procedures.)

Indication

Preset equalizing values

FREQ.

50 Hz

80 Hz

120 Hz

80 Hz

50 Hz

80 Hz

120 Hz

50 Hz

WIDTH

LOW LEVEL

FREQ.

700 Hz

2 kHz

WIDTH

MID LEVEL

FREQ.

8 kHz

12 kHz

8 kHz

12 kHz

8 kHz

HIGH LEVEL

FLAT

Hard Rock

R & B

+03

+02

+03

+04

+02

+03

+02

+03

+02

+03

+01

+02

+01

–02

POP

2 kHz

JAZZ

1 kHz

DanceMusic

Country

Reggae

Classic

User 1

User 2

User 3

700 Hz

2 kHz

+02

1 kHz

700 Hz

Available characters

You can use the following characters to assign names to CDs, radio stations, and external

components. (See page 28.)

Capital letters

Small letters

Numbers and symbols

”

(

)

’

–

space

;

space

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Remedies

Symptoms

Causes

Insert the disc correctly.

• Disc cannot be played

back.

Disc is inserted upside down.

(“DISC ERR” appears on the

display.)

Stop playback while driving on

rough roads.

• Sound is sometimes

interrupted.

You are driving on rough

roads.

Change the disc.

Disc is scratched.

Check the cords and

connections.

Connections are incorrect.

Adjust it to the optimum level.

• Sound cannot be heard

from the speakers.

The volume level is set to the

minimum level.

Check the cords and

connections.

Connections are incorrect.

Change the disc.

• “DISC ERR” appears on

the display.

Contents on the disc are not

compatible with the unit.

While pressing

, press and

• “NO DISC” or “EJECT

ERR” appears on the

display and disc cannot be

ejected.

The unit may function

incorrectly.

hold 0 for more than 2 seconds.

(Be careful not to drop the disc

when ejecting.)

• No message appears on

the display but disc cannot

be ejected.

Press the reset button on the

control panel. (See page 2.)

• This unit or CD changer

does not work at all.

The built-in microcomputer

may function incorrectly due

to noise, etc.

Store stations manually.

Signals are too weak.

• SSM (Strong-station

Sequential Memory)

automatic preset does not

work.

Connect the antenna firmly.

Insert a disc.

The antenna is not connected

firmly.

• Static noise while listening

to the radio.

No disc is in the magazine.

• “NO DISC” appears on the

display.

Connect this unit and the CD

changer correctly and press the

reset button of the CD changer.

This unit is not connected to

a CD changer correctly.

• “RESET 8” appears on the

display.

Press the reset button of the

CD changer.

• “RESET 1” – “RESET 7”

appears on the display.

Symptoms

Causes

Remedies

• Disc cannot be played back. No MP3 files are recorded on Change the disc.

the disc.

MP3 files do not have the

Add the extension code—mp3

extension code—mp3 in their to their file names.

file names.

MP3 files are not recorded in Change the disc.

the format compliant with ISO (Record MP3 files using a

9660 Level 1 or 2.

compliant application.)

• Noise is generated.

The file played back is not an Skip to another file or change

MP3 file (although it has the

extension code—mp3).

the disc.

(Do not add the extension

code—mp3 to non-MP3 files.)

• A longer readout time is

required (“FILE CHECK”

keeps flashing on the

display).

Readout time varies due to

the complexity of the

directory/file configuration.

Do not use too many

hierarchies and directories.

Also, do not record any other

types of audio tracks together

with MP3 files.

• Files cannot be played back Playback order is determined

as you have intended them

to play.

when the files are recorded.

• Elapsed playing time is not

correct.

This sometimes occurs

during play. This is caused by

how the files are recorded on

the disc.

• “MP3” flashes on the

display.

The current directory does

not contain any MP3 files.

Select another directory.

• Correct characters are not

This unit can only display

displayed. (Tag Display, e.g. alphabets (capital: A–Z,

album name) small: a–z) and numbers.

MAINTENANCE

CAUTIONS:

Handling discs

•

Do not insert 8 cm (3 3/16") discs (single CDs)

into the loading slot. (Such discs cannot be

ejected.)

Do not insert any disc of unusual shape — like a

heart or flower; otherwise, it will cause a

malfunction.

Do not expose discs to direct sunlight or any heat

source or place them in a place subject to high

temperature and humidity. Do not leave them in a

car.

This unit has been designed to reproduce the

discs bearing the following marks.

COMPACT

DIGITAL AUDIO

You can also play back your original CD-Rs

(Recordable) and CD-RWs (Rewritable) either in

audio CD format or in MP3 format.

How to handle discs

When removing a disc

from its case, press down

the center holder of the

Center holder

•

Do not use any solvent (for example, conventional

record cleaner, spray, thinner, benzine, etc.) to

clean discs.

case and lift the disc out,

When playing a CD-R or CD-RW

holding it by the edges.

• Always hold the disc by

the edges. Do not touch its recording surface.

You can play back your original CD-Rs or CD-RWs

recorded in audio CD format or in MP3 format.

(However, they may not be played back depending

on their characteristics or recording conditions.)

• User-edited CD-Rs (Recordable) and CD-RWs

(Rewritable), where audio CD tracks are

recorded, can be played back only if they are

already “finalized.”

When storing a disc into its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs into the cases after

use.

• Before playing back CD-Rs or CD-RWs, read

their instructions or cautions carefully.

• Some CD-Rs or CD-RWs may not be played

back on this unit because of their disc

characteristics, damage or stain on them, or if

the player’s lens is dirty.

• CD-Rs or CD-RWs are susceptible to high

temperatures or high humidity; so do not leave

them inside your car.

To keep discs clean

A dirty disc may not play

correctly. If a disc does become

dirty, wipe it with a soft cloth in

a straight line from center to

edge.

To play new discs

• CD-RWs may require a longer readout time.

(This is caused by the fact that the reflectance

of CD-RWs is lower than for regular CDs.)

New discs may have some

rough spots around the inner

and outer edges. If such a disc

is used, this unit may reject the

disc.

About mistracking:

To remove these rough spots, rub the edges with

a pencil or ball-point pen, etc.

Mistracking may result from driving on

extremely rough roads. This does not damage

the unit and the disc, but will be annoying.

We recommend that you stop disc playback

while driving on such rough roads.

Moisture condensation

Moisture may condense on the lens inside the

unit in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the unit may malfunction. In

this case, eject the disc and leave the unit

turned on for a few hours until the moisture

evaporates.

SPECIFICATIONS

CD PLAYER SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Type: Compact disc player

Front: 50 W per channel

Rear: 50 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Continuous Power Output (RMS):

Front: 19 W per channel into 4 Ω, 40 Hz to

20 000 Hz at no more than

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range:

98 dB

0.8 % total harmonic distortion.

Rear: 19 W per channel into 4 Ω, 40 Hz to

20 000 Hz at no more than

Signal-to-Noise Ratio: 102 dB

Wow and Flutter: Less than measurable limit

MP3 decoding format: MPEG1/2 Audio Layer 3

Max. Bit Rate: 320 Kbps

0.8 % total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Equalizer Control Range:

LOW: ±12 dB (50 Hz, 80 Hz, 120 Hz)

MID: ±12 dB (700 Hz, 1 kHz, 2 kHz)

HIGH: ±12 dB (8 kHz, 12 kHz)

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-In Level/Impedance:

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F)

Dimensions (W x H x D):

LINE IN: 1.5 V/20 kΩ load

MP3 INPUT: 3.5 mm dia. stereo mini jack

(analog)

Installation Size:

Line-Out Level/Impedance:

182 mm x 52 mm x 161 mm

(7-3/16" x 2-1/16" x 6-3/8")

Panel Size: 188 mm x 58 mm x 17 mm

(7-7/16" x 2-5/16" x 11/16")

Mass: 1.8 kg (4.0 lbs) (excluding accessories)

4.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range:

Design and specifications subject to change without

notice.

FM: 87.5 MHz to 107.9 MHz

(with channel interval set to 200 kHz)

87.5 MHz to 108.0 MHz

(with channel interval set to 50 kHz)

AM: 530 kHz to 1 710 kHz

(with channel interval set to 10 kHz)

531 kHz to 1 602 kHz

If a kit is necessary for your car, consult your

telephone directory for the nearest car audio

speciality shop.

(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

http://www

.jvcmobile.com

Visit us on-line for

Technical Support & Customer Satisfaction Survey.

US RESIDENTS ONLY

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to Reset

Still having trouble??

USA ONLY

Call 1-800-252-5722

http://www.jvcservice.com

We can help you!

VICTOR COMPANY OF JAPAN, LIMITED

EN, SP, FR

0401MNMMDWJES

KD-SH99

Installation/Connection Manual

Manual de instalación/conexión

Manuel d’installation/raccordement

0401MNMMDWJES

EN, SP, FR

LVT0661-001A

[J]

ENGLISH

ESPAÑOL

FRANÇAIS

• This unit is designed to operate on 12 V DC, NEGATIVE ground • Esta unidad está diseñada para funcionar con 12 V de CC, con • Cet appareil est conçu pour fonctionner sur des sources de

electrical systems.

sistemas eléctricos de masa NEGATIVA.

courant continu de 12 V à masse NEGATIVE.

INSTALLATION (IN-DASH

MOUNTING)

INSTALACION (MONTAJE EN EL

TABLERO DE INSTRUMENTOS)

INSTALLATION (MONTAGE DANS LE

TABLEAU DE BORD)

• The following illustration shows a typical installation. However, • La siguiente ilustración muestra una instalación típica. Sin • L’illustration suivante est un exemple d’installation typique.

you should make adjustments corresponding to your specific

car. If you have any questions or require information regarding

installation kits, consult your JVC car audio dealer or a company

supplying kits.

embargo usted deberá efectuar los ajustes correspondientes

a su automóvil. Si tiene alguna pregunta o necesita información

acerca de las herramientas para instalación, consulte con su

concesionario de JVC de equipos de audio para automóviles o

a una compañía que suministra tales herramientas.

Cependant, vous devez faire les ajustements correspondant à

votre voiture particulière. Si vous avez des questions ou avez

besoin d’information sur des kits d’installation, consulter votre

revendeur d’autoradios JVC ou une compagnie

d’approvisionnement.

1 Before mounting: Press

(Control Panel Release button)

1 Antes de instalar: Pulse

(botón de liberación del panel

de control) para desenganchar el panel de control, si ya

está fijado.

1 Avant le montage: Appuyer sur

(dèblocage du

panneau de commande) pour èventeullement détacher

le panneau de commande.

to detach the control panel if already attached.

* When shipped from the factory, the control panel is packed

in the hard case.

* El panel de control se expide de fábrica dentro del

estuche duro.

* Lorsque ce panneau de commande sort d’usine, il est

rangé dans un étui de transport.

2 Remove the trim plate.

3 Remove the sleeve after disengaging the sleeve locks.

1 Stand the unit.

2 Retire la placa de guarnición.

2 Retirer la plaque d’assemblage.

3 Libérer les verrous du manchon et retirer le manchon.

1 Poser l’appareil à la verticale.

3 Retire la cubierta después de desenganchar los retenes de

la cubierta.

Note: When you stand the unit, be careful not to damage

the fuse on the rear.

1 Ponga la unidad vertical.

Remarque: Lorsque vous mettez l’appareil à la

verticale, faire attention de ne pas endommager le

fusible situé sur l’arrière.

Nota: Al poner la unidad vertical, tenga cuidado de no

dañar el fusible provisto en la parte posterior.

2 Insert the 2 handles between the unit and the sleeve, as

illustrated, to disengage the sleeve locks.

2 Inserte las dos manijas entre la unidad y la cubierta tal

como en la ilustración y desenganche los retenes de la

cubierta.

3 Remove the sleeve.

2 Insérer les 2 poignées entre l’appareil et le manchon

comme indiqué pour désengagé les verrous de

manchon.

Note: Be sure to keep the handles for future use after

installing the unit.

3 Retire la cubierta.

3 Retirer le manchon.

4 Install the sleeve into the dashboard.

Nota: Después de instalar la unidad, asegúrese de

guardar las manijas para uso futuro.

Remarque: S’assurer de garder les poignées pour une

utilisation ultérieur, après l’’installation de l’appareil.

* After the sleeve is correctly installed in the dashboard, bend

the appropriate tabs to hold the sleeve firmly in place, as

illustrated.

4 Instale la cubierta en el tablero de instrumentos.

4 Installer le manchon dans le tableau de bord.

* Después de que la cubierta esté correctamente instalada

en el tablero de instrumentos, doble las lengüetas

correspondientes para sostener la cubierta firmemente en

su lugar, tal como se muestra.

* Après installation correcte du manchon dans le tableau

de bord, plier les bonnes pattes pour maintenir

fermement le manchon en place, comme montré.

5 Fix the mounting bolt to the rear of the unit’s body and place

the rubber cushion over the end of the bolt.

6 Do the required electrical connections.

7 Slide the unit into the sleeve.

8 Attach the trim plate.

5 Monter le boulon de montage sur l’arrière du corps de

l’appareil puis passer l’amortisseur en caoutchouc sur

l’extrémité du boulon.

5 Fije el perno de montaje en la parte trasera del cuerpo de la

unidad y coloque el cojín de goma sobre el extremo del

perno.

6 Réalisez les connexions électriques.

9 Attach the control panel.

6 Realice las conexiones eléctricas requeridas.

7 Faites glisser l’appareil dans le manchon jusqu’à ce qu’il

7 Deslice la unidad dentro de la cubierta hasta que quede

soit verrouillé.

trabada.

8 Attachez la plaque d’ajustage.

9 Remonter le panneau de commande.

8 Coloque la placa de guarnición.

9 Coloque el panel de control.

Dashboard

Tablero de instrumentos

Tableau de bord

Handle

Manija

Poignée

Rubber cushion

Cojín de goma

Amortisseur en caoutchouc

184 mm

(7-1/4")

Sleeve

Cubierta

Manchon

Lock Plate

Placa de bloqueo

Plaque de verrouillage

53 mm

(2-1/8")

Slot

Ranura

Fente

Control panel

Panel de control

Panneau de commande

Mounting bolt

Perno de montaje

Boulon de montage

Fuse

Fusible

See “ELECTRICAL CONNECTIONS.”

Véase “CONEXIONES ELECTRICAS”.

Référez-vous “RACCORDEMENTS

ELECTRIQUES” .

Trim plate

Placa de guarnición

Plaque d’assemblage

Trim plate

Placa de guarnición

Plaque d’assemblage

Sleeve

Cubierta

Manchon

Control panel

Panel de control

Panneau de commande

TROUBLESHOOTING

• The fuse blows.

LOCALIZACION DE AVERIAS

• El fusible se quema.

EN CAS DE DIFFICULTES

• Le fusible saute.

* Are the red and black leads connected correctly?

• Power cannot be turned on.

* Is the yellow lead connected?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in

common?

• Unit becomes hot.

* Les fils rouge et noir sont-ils racordés correctement?

• L’appareil ne peut pas être mise sous tension.

* Le fil jaune est-elle raccordée?

• Pas de son des enceintes.

* Le fil de sortie de d’enceinte est-il court-circuité?

* ¿Están los conductores rojo y negro correctamente conectados?

• No es posible conectar la alimentación.

* ¿Está el cable amarillo conectado?

• No sale sonido de los altavoces.

* ¿Está el cable de salida del altavoz cortocircuitado?

• El sonido presenta distorsión.

* ¿Está el cable de salida del altavoz conectado a masa?

* ¿Están los terminales “–” de los altavoces L y R conectados a

una masa común?

• Le son est déformé.

* Le fil de sortie de d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-elles mises

ensemble à la masse?

• L’appareil devient chaud.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in

common?

* Le fil de sortie de d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-elles mises

ensemble à la masse?

• La unidad se calienta.

* ¿Está el cable de salida del altavoz conectado a masa?

* ¿Están los terminales “–” de los altavoces L y R conectados a

una masa común?

•When installing the unit without using the sleeve

•Instalación de la unidad sin utilizar la cubierta

•When using the optional stay

•Cuando emplea un soporte opcional

•Lors de l’utilisation du hauban en option

•Lors de l’installation de l’appareil sans utiliser de manchon

In a Toyota for example, first remove the car radio and install the unit in its place.

En un Toyota por ejemplo, primero extraiga la radio del automóvil y luego instale la unidad en su

lugar.

Fire wall

Tabique a prueba de incendios

Cloison

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.

* Not included with this unit.

* No suministrado con esta unidad.

* Non fourni avec cet appareil.

Flat type screws (M5 x 6 mm)*

Tornillos tipo plano (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Stay (option)

Soporte (opción)

Hauban (en option)

Washer

Arandela

Rondelle

Dashboard

Tablero de instrumentos

Tableau de bord

Lock nut

Tuerca de seguridad

Ecrou d’arrêt

Bracket*

Ménsula*

Support*

Screw (option)

Tornillo (opción)

Vis (en option)

Flat type screws (M5 x 6 mm)*

Tornillos tipo plano (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Pocket

Compartimiento

Poche

Bracket*

Ménsula*

Mounting bolt

Perno de montaje

Boulon de montage

Support*

Note: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If

longer screws are used, they could damage the unit.

Sleeve

Cubierta

Manchon

Nota: Cuando instala la unidad en la ménsula de montaje, asegúrese de utilizar los tornillos de

6 mm de longitud. Si se utilizan tornillos más largos, éstos pueden dañar la unidad.

Remarque: Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des

vis d’une longueur de 6 mm. Si des vis plus longues sont utilisées, elles peuvent endommager

l’appareil.

Removing the unit

Extracción de la unidad

Retrait de l’appareil

• Before removing the unit, release the rear section.

• Antes de extraer la unidad, libere la sección trasera.

1 Extraiga el panel de control.

• Avant de retirer l’appareil, libérer la section arrière.

1 Remove the control panel.

1 Retirer le panneau de commande.

2 Remove the trim plate.

2 Retire la placa de guarnición.

2 Retirer la plaque d’assemblage.

3 Insert the 2 handles into the slots, as shown.Then, while gently 3 Inserte las 2 manijas entre las ranuras, como se muestra.

3 Introduire les deux poignées dans les fentes, comme montré.

Puis, tout en tirant doucement les poignées écartées, faire

glisser l’appareil pour le sortir. (S’assurer de conserver les

poignées après l’installation de l’appareil.)

pulling the handles away from each other, slide out the unit.

Luego, separe shavemente las manijas y extraiga la unidad.

(Asegúrese de conservar las manijas después de

instalarlo.)

(Be sure to keep the handles after installing it.)

Control panel

Panel de control

Panneau de commande

Trim plate

Placa de guarnición

Plaque d’assemblage

Handle

Manija

Poignée

Parts list for installation and connection

The following parts are provided with this unit.

After checking them, please set them correctly.

Lista de piezas para instalación y conexión

Con esta unidad se suministran las siguientes piezas.

Después de inspeccionarlas, colóquelas correctamente.

Liste des pièces pour l’installation et

raccordement

Les pièces suivantes sont fournies avec cet appareil.

Après vérification, veuillez les placer correctement.

Hard case/Control panel

Estuche duro/Panel de control

Etui de transport/Panneau de

commande

Sleeve

Cubierta

Manchon

Trim plate

Placa de guarnición

Plaque d’assemblage

Remote controller

Control remoto

Télécommande

Battery

Pila

Pile

ANGLE

CR2025

AUX

SEL

VOLUME

AM-RK100

Power cord

Cordón de alimentación

Cordon d’alimentation

Handles

Manijas

Poignées

Washer (ø5)

Arandela (ø5)

Rondelle (ø5)

Lock nut (M5)

Tuerca de seguridad (M5)

Ecrou d’arrêt (M5)

Mounting bolt (M5 x 20 mm)

Perno de montaje (M5 x 20 mm)

Boulon de montage (M5 x 20 mm)

Rubber cushion

Cojín de goma

Amortisseur en caoutchouc

ELECTRICAL CONNECTIONS

CONEXIONES ELECTRICAS

RACCORDEMENTS ELECTRIQUES

To prevent short circuits, we recommend that you disconnect the Para evitar cortocircuitos, recomendamos que desconecte el Pour éviter tout court-circuit, nous vous recommandons de

battery’s negative terminal and make all electrical connections terminal negativo de la batería y que efectúe todas las conexiones débrancher la borne négative de la batterie et d’effectuer tous les

before installing the unit. If you are not sure how to install this unit eléctricas antes de instalar la unidad. Si usted no está seguro de raccordements électriques avant d’installer l’appareil. Si l’on n’est

correctly, have it installed by a qualified technician.

cómo instalar correctamente la unidad, hágala instalar por un pas sûr de pouvoir installer correctement cet appareil, le faire installer

técnico cualificado.

par un technicien qualifié.

Note:

Nota:

Remarque:

This unit is designed to operate only on 12 V DC, NEGATIVE

ground electrical systems. If your vehicle does not have this

system, a voltage inverter is required, which can be purchased at

JVC car audio dealers.

Esta unidad está diseñada para funcionar con 12 V de CC, con

sistemas eléctricos de masa NEGATIVA solamente. Si su vehículo

no posee este sistema, será necesario un inversor de tensión, que

puede ser adquirido en los concesionarios de JVC de equipos de

audio para automóviles.

• Reemplace el fusible por uno con la corriente especificada. Si el

fusible se quemase frecuentemente consulte con su

concesionario de JVC de equipos de audio para automóviles.

• Si el ruido fuese un problema...

Esta unidad tiene un filtro de ruido en el circuito de alimentación.

Sin embargo, en algunos vehículos, pueden producirse

chasquidos u otros ruidos indeseados. En tal caso conecte el

terminal de tierra posterior (véase diagrama de conexión) del

receptor al chasis del automóvil, utilizando cordones más gruesos

y cortos tales como alambre de cobre trenzado o de grueso

calibre. Si el ruido persiste, consulte a su concesionario de JVC

de equipos de audio para automóvil.

• La entrada máxima de los altavoces traseros no debe ser no

más que 50 W en el trasero y 50 W en la frontal, con una

impedancia de 4 Ω a 8 Ω.

• Asegúrese de conectar esta unidad a tierra en el chasis del

automóvil.

• El sumidero térmico estará muy caliente después del uso.

Asegúrese de no tocarlo al desmontar esta unidad.

Cet appareil est conçu pour fonctionner sur des sources de courant

continu de 12 V à masse NEGATIVE seulement. Si votre véhicule

n’offre pas ce type d’alimentation, il vous faut un convertisseur de

tension, que vous pouvez acheter chez un revendeur d’autoradios

JVC.

• Replace the fuse with one of the specified rating. If the fuse

blows frequently, consult your JVC car audio dealer.

• If noise is a problem...

This unit incorporates a noise filter in the power circuit.However,

with some vehicles, clicking or other unwanted noise may occur.

If this happens, connect the unit’s rear ground terminal (see

connection diagram) to the car’s chassis using shorter and thicker

cords, such as copper braiding or gauge wire. If noise still

persists, consult your JVC car audio dealer.

• Maximum input of the speakers should be no more than 50 W at

the rear and 50 W at the front, with an impedance of 4 Ω to 8 Ω.

• Be sure to ground this unit to the car’s chassis.

• The heat sink becomes very hot after use. Be careful not to

touch it when removing this unit.

• Remplacer le fusible par un de la valeur précisée.Si le fusible saute

souvent, consulter votre revendeur d’autoradios JVC.

• Si le bruit est un problème...

Cet appareil incorpore un filtre de bruit dans le circuit d’alimentation.

Cependant, avec certains véhicules, quelques claquements ou

autres bruits non désirés risquent de se produire. Si cela arrive,

raccorder la borne arrière de masse de l’appareil au châssis de

la voiture (voir le schéma de raccordement) en utilisant des cordons

les plus gros et les plus courts possibles telle qu’une barre de cuivre

ou une tresse. Si le bruit persiste, consulter votre revendeur

d’autoradios JVC.

• La puissance admissible des enceintes devrait n’être pas plu qu’c

50 W à l’arrière et à 50 W l’avant, avec une impédance de 4 Ω à 8 Ω.

• S’assurer de raccorder la mise à la masse de cet appareil au

châssis de la voiture.

• Le dissipateur de chaleur devient très chaud après usage. Faire

attention de ne pas le toucher en retirant cet appareil.

Heat sink

Sumidero térmico

Dissipateur de chaleur

ENGLISH

ESPAÑOL

FRANÇAIS

A Typical Connections / Conexiones típicas / Raccordements typiques

Antes de la conexión: Verifique atentamente el conexionado del Avant de commencer la connexion: vérifiez attentivement le

vehículo para no cometer errores al conectar esta unidad. Una câblage du véhicule pour ne pas connecter incorrectement cet

conexión incorrecta podría producir daños graves en la unidad. appareil. Une connexion incorrecte peut endommager

sérieusement l’appareil.

Before connecting: Check the wiring in the vehicle carefully not

to fail in connecting this unit. Incorrect connection may cause a

serious damage to this unit.

1 Conecte los conductores de color del cable de alimentación

1 Connect the colored leads of the power cord to the car battery,

speakers and automatic antenna (if any) in the following

sequence.

a la batería del automóvil, altavoces y antena automática (si 1 Connectez les fils de couleur du cordon d’alimentation à la

la hubiere) en la secuencia siguiente.

1 Negro: a tierra

2 Amarillo: a la batería del automóvil (12 V constantes)

3 Rojo: a un terminal de accesorio

4 Azul con rayas blancas: a la antena automática

(200 mA máx.)

5 Naranja con rayas blancas: al interruptor de control de

las luces del automóvil

6 Otros: a los altavoces

batterie de la voiture, aux enceintes et à l’antenne automatique

(s’il y en a une) dans l’ordre suivant.

1 Black: ground

1 Noir: a la masse

2 Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to automatic antenna

(200 mA max.)

2 Jaune: a la batterie de la voiture (12 Vconstant)

3 Rouge: à la prise accessoire

4 Bleu avec bande blanche: à l’antenne automatique

(200 mA max.)

5 Orange with white stripe: to car light control switch

6 Others: to speakers

5 Orange avec bande blanche: à l’interrupteur d’éclairage

de la voiture

6 Autres fils: aux enceintes

2 Connect the antenna cord.

2 Conecte el cable de antena.

2 Connectez le cordon d’antenne.

3 Finally connect the wiring harness to the unit.

3 Por último, conecte a la unidad el cableado preformado.

3 Finalement, connectez le faisceau de fils à l’appareil.

Before connecting the CD changer, make sure that the unit is turned off.

Antes de conectar el cambiador de CD, asegúrese de que la unidad esté apagada.

Avant de connecter le changeur CD, s’assurer que l’unité est éteinte.

Rear ground terminal

Terminal de tierra posterior

When connecting a CD changer, we recommend that you connect one of the CH-X series

CD changers.

• If your CD changer is one of the KD-MK series, you need an optional cord (KS-U15K).

Antenna terminal

Borne arrière de masse

Terminal de la antena

To antenna

A la antena

A l’antenne

Borne de l’antenne

Cuando conecte un cambiador de CD, se recomienda utilizar uno de la serie CH-X.

• Si su cambiador de CD es de la serie KD-MK, necesitará un cable opcional (KS-U15K).

LINE OUT (FRONT)

(see diagram B )

Salida de linea

(Delantera)

(véase diagrama B )

Sortie de ligne (avant)

(voir le diagramme B )

JVC CD changer jack

Jack del cambiador de CD de JVC

Prise de changeur CD JVC

Lors de la connexion d’un changeur CD, nous vous recommandons d’utiliser un des

changeurs CD de la série CH-X.

• Si votre changeur appartient à la série KD-MK, vous avez besoin d’un cordon optionnel

(KS-U15K).

JVC CD changer

Cambiador de CD JVC

Changeur de CD JVC

LINE OUT (REAR)

(see diagram B )

Salida de linea

(Trasera)

(véase diagrama B )

Sortie de ligne (arriere)

(voir le diagramme B )

Ignition switch

Interruptor de encendido

Interrupteur d’allumage

Not supplied with this unit.

No suministrado con esta unidad.

Non fourni avec cet appareil.

15 A fuse

Fusible de 15 A

Fusible 15 A

Black

Negro

Noir

To metallic body or chassis of the car

A un cuerpo metálico o chasis del automóvil

Au corps métallique ou châssis de la voiture

SUBWOOFER OUT

(see diagram B )

Salida de SUBWOOFER

(véase diagrama B )

Sortie de caisson de grave

(voir le diagramme B )

Yellow*¹

Amarillo*¹

Jaune*¹

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch)

2 ^{A un terminal activo del bloque de fusibles conectado a la}

batería del automóvil (desviando el interruptor de encendido)

CONTROL cord

(see diagram B )

Cable de control

(véase diagrama B )

Cordon de commande

(voir le diagramme B )

Àune borne sous tension du porte-fusible connectée à la batterie

Red

Rojo

Rouge

LINE IN

de la voiture (en dérivant l’interrupteur d’allumage)

(see diagram B )

Entrada de linea

(véase diagrama B )

Entrée de ligne

Fuse block

Bloque de fusibles

Porte-fusible

To an accessory terminal in the fuse block

A un terminal accesorio del bloque de fusibles

Blue with white stripe

Azul con rayas blancas

(voir le diagramme B )

À la prise accessoire du porte-fusible

Bleu avec bande blanche

To automatic antenna if any

A la antena automática si la hubiere

À l’antenne automatique s’il y en a une

To car light control switch

Al interruptor de control

de las luces del automóvil

À l’interrupteur d’éclairage

de la voiture

Orange with white stripe

Naranja con rayas blancas

Orange avec bande blanche

*1: Before checking the operation of this unit prior to installation, this

lead must be connected, otherwise power cannot be turned on.

*1: Antes de comprobar el funcionamiento de esta unidad previa

a la instalación, es necesario conectar este cable, de lo

contrario no se podrá conectar la alimentación.

*1: Pour vérifier le fonctionnement de cet appareil avant installation,

ce fil doit être raccordé, sinon l’appareil ne peut pas être mis

sous tension.

(ILLUMINATION)

White with black stripe

Blanco con rayas negras

Blanc avec bande noire

White

Blanco

Blanc

Gray with black stripe

Gris con rayas negras

Gris avec bande noire

Gray

Gris

Green with black stripe

Verde con rayas negras

Vert avec bande noire

Green Purple with black stripe

Purple

Púrpura

Violet

Verde

Púrpura con rayas negras

Violet avec bande noire

Vert

Right speaker (front)

Altavoz derecho (frontal)

Enceinte droit (avant)

Left speaker (rear)

Altavoz izquierdo (trasero)

Enceinte gauche (arrière)

Left speaker (front)

Altavoz izquierdo (frontal)

Enceinte gauche (avant)

Right speaker (rear)

Altavoz derecho (trasero)

Enceinte droit (arrière)

PRECAUTIONS on power supply and speaker

connections:

PRECAUCIONES sobre las conexiones de la

fuente de alimentación y de los altavoces:

PRECAUTIONS sur l’alimentation et la

connexion des enceintes:

• DO NOT connect the speaker leads of the power cord to the • NO conecte los conductores de altavoz del cable de • NE CONNECTEZ PAS les fils d’enceintes du cordon

car battery; otherwise, the unit will be seriously damaged.

• Connect the black lead (ground), yellow lead (to car battery,

alimentación a la batería de automóvil, pues podrían

producirse graves daños en la unidad.

d’alimentation à la batterie; sinon, l’appareil serait

sérieusement endommagé.

constant 12V), and red lead (to an accessory terminal) correctly. • Conecte correctamente el conductor negro (a tierra), el • Connectez correctement le fil noir (a la masse), le fil jaune (a la

• BEFORE connecting the speaker leads of the power cord to the

speakers, check the speaker wiring in your car.

– If the speaker wiring in your car is as illustrated in Fig. 1 • ANTES de conectar a los altavoces los conductores de altavoz • AVANT de connecter les fils d’enceintes du cordon

conductor amarillo (a la batería del automóvil, 12 V constantes),

y el conductor rojo (a un terminal de accesorio).

batterie de la voiture,12 V constant) et le fil rouge (à la prise

accessoire).

and Fig. 2 below, DO NOT connect the unit using that original

speaker wiring. If you do, the unit will be seriously damaged.

Redo the speaker wiring so that you can connect the unit to

the speakers as illustrated in Fig. 3.

– If the speaker wiring in your car is as illustrated in Fig. 3, you

can connect the unit using the original speaker wiring in your car.

– If you are not sure of the speaker wiring of your car, consult

your car dealer.

del cable de alimentación, verifique el conexionado de altavoz

de su automóvil.

d’alimentation aux enceintes, vérifiez le câblage des enceintes

de votre voiture.

– Si el conexionado de altavoz de su automóvil es como

se indica en las Fig. 1 y Fig. 2 de abajo, NO conecte la

unidad utilizando ese conexionado de altavoz original. Si lo

hace, se producirán daños graves en la unidad.

Vuelva a efectuar el conexionado de altavoz de manera que

pueda conectar la unidad a los altavoces de la manera

indicada en la Fig.3.

– Si el conexionado de altavoz de su automóvil es como

se indica en la Fig. 3, podrá conectar la unidad utilizando

el conexionado de altavoz original de su automóvil.

– Si tiene dudas sobre el conexionado de altavoz de su

automóvil, consulte con su concesionario.

– Si le câblage des enceintes de votre voiture est réalisé

comme montré sur la Fig. 1 ou Fig. 2 ci-dessous, NE

CONNECTEZ PAS l’appareil en utilisant ce câblage original

d’enceintes. Si vous le faites, l’appareil sera sérieusement

endommagé.

Recommencez le câblage des enceintes de façon que vous

puissiez connecter l’appareil aux enceintes comme montré

sur la Fig. 3.

– Si le câblage des enceintes de votre voiture est comme

montré sur la Fig. 3, vous pouvez connecter l’appareil en

utilisant ce câblage original d’enceintes pour votre voiture.

– Si vous n’êtes pas sûrs du câblage d’enceintes de votre

voiture, consulter le concessionnaire de votre voiture.

Fig. 1

Fig. 2

Fig. 3

Connecting the leads / Conexión de los conductores / Raccordement des fils

Twist the core wires when

connecting.

CAUTION / PRECAUCION / PRECAUTION:

Solder the core wires to connect them securely.

Suelde los alambres de alma para conectarlos con

firmeza.

Souder les âmes desfils pour les raccorder entre eux de

façon sûre.

Retuerza los alambres de

alma para conectarlos.

Torsader les âmes des fils en

les raccordant.

•

To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

Para evitar cortocircuitos, cubra los cables NO UTILIZADOS con cinta aislante.

Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS utilisés avec de

la bande isolante.

B Connections Adding Other Equipment / Conexiones para añadir otros equipos / Raccordement pour ajouter d’autres appareils

Usted podrá conectar un amplificador y otros equipos para Vous pouvez connecter un amplificateur ou autre appareil pour

mejorar el sistema estéreo de su automóvil. améliorer votre système autoradio.

• Conecte el conductor remoto (azul con rayas blancas) al • Connectez le fil de commande à distance (bleu avec bande

You can connect an amplifier and other equipment to upgrade

your car stereo system.

• Connect the remote lead (blue with white stripe) to the remote

lead of the other equipment so that it can be controlled through

this unit.

conductor remoto del otro equipo para poderlo controlar a

través de esta unidad.

blanche) au fil de commande à distance de l’autre appareil de

façon qu’il puisse être commandé via cet appareil.

• Para el amplificador:

• Pour l’amplificateur:

• For amplifier:

– Conecte los terminales de salida de línea de esta unidad a – Raccorder les fiches de sortie ligne de cet appareil aux fiches

– Connect this unit’s line-out terminals to the amplifier’s line-in

terminals.

los terminales de entrada de línea del amplificador.

– Desconecte los altavoces de esta unidad y conéctelos

al amplificador. Deje los conductores de los altavoces

de esta unidad sin usar.

d’entrée ligne de l’amplificateur.

– Déconnectez les enceintes de cet appareil et connectez-les

à l’amplificateur. Laissez les fils d’enceintes de cet appareil

inutilisés.

– Disconnect the speakers from this unit, connect them to

the amplifier. Leave the speaker leads of this unit unused.

– You can switch off the built-in amplifier and send the audio

signals only to the external amplifier(s) to get clear sounds

and to prevent internal heat built-up inside the unit. See page

26 of the Instructions (separate volume).

– The line output level of this unit is kept high to maintain the

hi-fi sounds reproduced from this unit.

When connecting an external amplifier to this unit, turn

down the gain control on the external amplifier to obtain the

best performance from this unit.

– Podrá desconectar el amplificador incorporado y enviar las – Vous pouvez désactiver l’amplificateur intégré et envoyer les

señales de audio solamente al(los) amplificador(es)

externo(s) para obtener sonidos nítidos y evitar que se

caliente el interior de la unidad. Véase la página 26 de las

instrucciones (volumen separado).

– El nivel de salida de línea de esta unidad permanece alto – Le niveau de sortie de ligne de cet appareil est maintenu à un

para que corresponda con los sonidos de alta fidelidad

reproducidos por esta unidad.

Cuando conecte un amplificador externo a esta unidad,

disminuya el control de ganancia del amplificador externo

para obtener un óptimo rendimiento de esta unidad.

signaux audio uniquement à un ou plusieurs amplificateurs

extérieurs afin d’obtenir un son clair et pour éviter un échauffement

interne de l’appareil.Référez-vous à la page 26 du mode d’emploi

(volume séparé).

niveau élevé pour maintenir une qualité Hi-Fi pour les sons

reproduits par cet appareil.

Lors de la connexion d’un amplificateur extérieur à cet

appareil, diminuez le réglage du gain sur l’amplificateur extérieur

pour obtenir les meilleures performances de cet appareil.

Amplifier / Amplificador / Amplificateur

Rear speakers

Altavoces traseros

Enceintes arrière

Remote lead

Cable remoto

Fil d’alimentation à distance

Y-connector (not supplied with this unit)

Conector en Y (no suministrado con esta unidad)

Connecteur Y (non fourni avec cet appareil)

CAUTION / PRECAUCION / PRECAUTION:

• To prevent internal heat built-up inside this unit,

place this unit UNDER the other equipment.

• Para evitar el aumento del calor interior de esta

unidad, póngala DEBAJO del otro equipo.

• Pour éviter un échauffement interne de cet

appareil, placez-le SOUS l’autre appareil.

INPUT

JVC Amplifier

Amplificador de JVC

Amplificateur JVC

Remote lead (Blue with white stripe)

Cable remoto (Azul con rayas blancas)

Fil d’alimentation à distance (Bleu avec bande blanche)

To automatic antenna if any

Signal cord (not supplied with this unit)

A la antena automática, si la hubiere

Vers l’antenne automatique, s’il y en a une

Cable de señal (no suministrado con esta unidad)

Cordon de signal (non fourni avec cet appareil)

LINE OUT

(FRONT)

LINE OUT

(REAR)

You can connect

Podrá conectar otro

Vous pouvez connecter

un autre amplificateur de

puissance pour les

another power

amplifier for front

speakers.

amplificador de potencia

para los altavoces

delanteros.

KD-SH99

enceintes avant.

Signal cord (not supplied with this unit)

Front speakers

Cable de señal (no suministrado con esta unidad)

Cordon de signal (non fourni avec cet appareil)

Altavoces delanteros

Enceintes avant

Subwoofer (SUB WOOFER OUT) / Subwoofer (Salida de SUB WOOFER) / Caisson de grave (Sortie de caisson de grave)

You can connect a subwoofer through an amplifier to reinforce

the bass.

• For their connections, refer to the instructions supplied with

your subwoofer.

Vous pouvez connecter un caisson de grave par un amplificateur

pour renforcer les graves.

• Pour la connexion, référez-vous aux instructions fournies avec

le caisson de grave.

Usted podrá conectar un subwoofer a través de un

amplificador para reforzar los graves.

• Con respecto a sus conexiones, refiérase a las

instrucciones suministradas con sus subwoofer.

Signal cord (not supplied with this unit)

Cable de señal (no suministrado con esta unidad)

Cordon de signal (non fourni avec cet appareil)

Subwoofer

Caisson de grave

SUB WOOFER OUT

Salida de SUBWOOFER

Sortie de caisson de grave

JVC Amplifier

Amplificador de JVC

KD-SH99

Amplificateur JVC

DVD, VCR or TV / DVD, VCR o TV / DVD, Magnétoscope ou Téléviseur

Signal cord (not supplied with this unit)

Cable de señal (no suministrado con esta unidad)

Cordon de signal (non fourni avec cet appareil)

Signal cord (not supplied with this unit)

Cable de señal (no suministrado con esta unidad)

Cordon de signal (non fourni avec cet appareil)

You can connect the DVD player (KV-DV7).

Podrá conectar el reproductor DVD (KV-DV7).

KV-DV7

Vous pouvez connecter un lecteur de DVD (KV-DV7).

LINE IN

OUTPUT

VIDEO

* To the mobile color monitor system or the audio-video input terminal of a stereo

audio-video TV

AUDIO

KD-SH99

* Al sistema de monitor de color móvil o al terminal de entrada de audio-vídeo del TV

de audio-vídeo estereofónico

* Au système mobile de moniteur couleur ou aux prises d’entrée audio-vidéo d’un

DIGITAL

OUTPUT

(OPTICAL)

REMOTE

SENSOR

INPUT

téléviseur stéréo audio-vidéo

CONTROL cord

Remote control data cord (supplied with KV-DV7)

Cable de CONTROL

Cordon de commande

Cable de datos de control remoto (suministrado con KV-DV7)

Cordon de données de télécommande (fourni avec le KV-DV7)

Radio Shack SYSTEM 440 User Manual
Planar Systems Car Video System PT1745S User Manual
Panasonic Camcorder DMC FH25 User Manual
Onkyo CR 515 CR 315 User Manual
Newcon Optik AN 25 125X80 User Manual
Mazda 2009 CX 7 User Manual
Lindy 32555 User Manual
Kicker SOLOCLASSIC S10C User Manual
Kenwood Car Stereo System KDC CMP21V User Manual
JVC LYT2077 001B M User Manual