CD RECEIVER
KD-LX1
KD-LX1
KD-LX1
RECEPTOR CON CD
RECEPTEUR CD
SSM
KD-LX1
BAND
SOUND
RPT
RND
INT
10
MONO
11
6LO12
MODE
DISP
BBE
FUNC
OFF/0
SEL
1
7
2
8
3
9
4
5
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Model No.
Serial No.
LVT0223-001A
[J]
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
BASIC OPERATIONS....................................................5
RADIO OPERATIONS...................................................6
Listening to the radio ..................................................................... 6
Searching a station automatically: Auto search ........................... 6
Searching a station manually: Manual search ............................. 7
Storing stations in memory ............................................................ 8
FM station automatic preset: SSM ...............................................8
Manual preset.............................................................................. 9
Tuning into a preset station ......................................................... 10
CD OPERATIONS.......................................................11
Playing a CD ................................................................................. 11
Playing a CD Text ......................................................................... 12
Locating a track or a particular portion on a CD ..................... 13
Selecting CD playback modes...................................................... 14
Prohibiting CD ejection ............................................................... 15
SOUND ADJUSTMENTS .............................................16
Adjusting the sound...................................................................... 16
Turning on/off the BBE function ................................................. 17
Selecting preset sound modes ...................................................... 18
Storing your own sound adjustments ......................................... 19
OTHER MAIN FUNCTIONS .........................................20
Setting the clock ............................................................................ 20
Controlling the volume automatically (Audio Cruise) .............. 21
Changing the general settings (PSM) ......................................... 23
Assigning names to the sources ................................................... 27
To be continued on the next page
How to Reset your unit
After installing the unit or when you have
troubles with operations, reset the
microcomputer built in this unit.
Press the reset button on the front panel
using a ball-point pen or a similar tool.
• REMEMBER your preset adjustments such
as preset channels or sound adjustments will
also be erased from memory.
3
CD CHANGER OPERATIONS ......................................29
Playing CDs ................................................................................... 29
Selecting CD playback modes...................................................... 31
MAINTENANCE.........................................................33
Handling CDs ................................................................................ 33
TROUBLESHOOTING .................................................34
SPECIFICATIONS .......................................................35
To activate “DEMO” (Demonstration)
While holding DISP, press
lower part of the display.
¢ until “DEMO” appears on the
Various functions and display illumination modes equipped for
this unit will be demonstrated repeatedly in sequence.
• The DEMO mode will turn off automatically after 1 hour.
To turn off the DEMO mode, press
DISP until “DEMO” disappears from the lower part of the display.
¢ again while holding
How to use the number buttons:
After pressing MODE (while “MODE” remains on the display), the number buttons work
as other different function buttons.
To use these buttons as number buttons after pressing MODE, wait for 5 seconds
without pressing any number button so that “MODE” disappears from the display.
• Pressing MODE again also erases “MODE” from the display.
4
BASIC OPERATIONS
Note:
When you use this unit for the
first time, set the built-in clock
correctly, see page 20.
1
3
2
1
2
Turn on the power.
The display illuminates and the control panel comes out.
Select the source.
Each time you press the button, the source changes as described to
the left:
*
CD
CD
To operate the tuner, see pages 6 – 10.
To operate the CD player, see pages 11 – 15.
To operate the CD changer, see pages 29 – 32.
FM
or
AM
**
changer
Notes:
* If a CD is not in the loading slot, you cannot select CD as the source to play.
** Without connecting the CD changer, you cannot select it as the source to play.
3
4
Adjust the volume.
CD-CH
BBE
Volume level meter
Adjust the sound as you want (see pages 16 – 19).
To drop the volume in a moment
Press FUNC (function) for more than 1 second while listening to any source. “ATT” starts
flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button for more than 1 second again.
To turn off the power
Press and hold OFF/ 0 until “SEE YOU” appears on the display.
5
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual searching to tune into a particular station.
Searching a station automatically: Auto search
FUNC
LO MODE
1
2
1
2
Select the band (FM1, FM2, FM3 or AM) you want.
If a CD is in the loading slot or the CD changer is connected, first select
the tuner using FUNC. (See page 5.)
CD-CH
BBE
Level meter (see page 25)
Selected band (then clock time: see
page 25) appears.
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to
an FM broadcast.
To search stations of
Start searching a station.
higher frequencies
When a station is received, searching stops.
To search stations of
lower frequencies
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in FM stations only with strong signals
This function works only while searching FM stations, including SSM preset (see page 8).
1 Press MODE.
“MODE” appears on the lower part of the display, and the number buttons can work as
different function buttons.
2 Press LO (Local), while “MODE” is still on the display, so that the LOCAL indicator lights up
on the display.
Each time you press the button, the LOCAL indicator lights up and goes off alternately.
6
Searching a station manually: Manual search
MODE
MONO
1
2, 3
1
2
Select the band (FM1, FM2, FM3 or AM) you want.
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to
an FM broadcast.
Press and hold
¢ or 4
until “M” (Manual)
starts flashing on the display.
LOUD
CD-CH
BBE
3
To tune into stations
Tune into a station you want while
“M” is flashing.
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
of higher frequencies
To tune into stations
of lower frequencies
When an FM stereo broadcast is hard to receive:
1 Press MODE while listening to an FM stereo broadcast (the STEREO indicator lights up
while receiving an FM stereo broadcast).
“MODE” appears on the lower part of the display, and the number buttons can work as
different function buttons.
2 Press MONO (monaural), while “MODE” is still on the display, so that the MONO indicator
lights up on the display.
The sound you hear becomes monaural but reception will be improved (the STEREO indicator
goes off).
Each time you press the button, the MONO indicator lights up and goes off alternately.
7
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
2
1
1
2
Select the FM band number (FM1, FM2 or FM3) you
want to store FM stations into.
AM
FM1
FM2
FM3
Press and hold both buttons for more than
2 seconds.
LOUD
CD-CH
BBE
“SSM” appears, then disappears when automatic
preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3).These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
8
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
3
1
2
1
2
Select the FM1 band.
Tune into a station of 88.3 MHz.
See page 6 to tune into a station.
3
Press and hold the number button (in this example, 1)
for more than 2 seconds.
CD-CH
BBE
FM band number and “MEMO”
appears alternately for a while.
CD-CH
BBE
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
9
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 8
and 9.
1
2
1
2
Select the band (FM1, FM2, FM3 or AM) you want.
Select the number (1 – 6) for the preset station you want.
When using this unit in an area other than North or South America:
You need to change the AM/FM channel intervals. See “To change the AM/FM channel
intervals” on page 26.
10
CD OPERATIONS
Playing a CD
FUNC
1
1
2
Open the loading slot.
The display panel moves down, and the loading slot appears.
Insert a disc into the loading slot.
The unit draws a CD, the display panel moves up, and CD play starts
automatically.
Total track number Total playing time of
of the inserted disc the inserted disc
Elapsed
playing time
Current track
Notes:
• When a CD is in the loading slot, selecting “CD” as the source by pressing FUNC starts CD play.
• When a CD is inserted upside down, “CD EJECT” appears on the display and the CD automatically
ejects.
• When you play a CD Text, the disc title and performer appear on the display. Then the current track
and elapsed playing time appears on the display. See also “Playing a CD Text” (page 12) and “To
select the scroll mode” (page 26).
If a CD Text includes much text information, some may not appear on the display.
To stop play and eject the CD
Press OFF/0 briefly.
CD play stops, the display panel moves down, then the CD automatically ejects from the loading
slot.
• If you change the source, the CD play also stops (without ejecting the CD this time).
To close the display panel, press
¢ or 4
.
CAUTION: NEVER insert your finger between the display
panel and the unit, as it may get caught in the
unit.
Note:
If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into the
loading slot to protect it from dust. (CD play will not start this time.)
11
Playing a CD Text
In a CDText, some information about the disc (its disc title, performer and track title) is recorded.
You can show these disc information on the display.
DISP
Select text display mode while playing a CD Text.
Each time you press the button, the display changes as follows:
Disc Title / Performer
Current track no.
Track Title
and Elapsed playing time
Notes:
• The display shows up to 10 characters at one time and scrolls if there are more than 10 characters.
See also “To select the scroll mode” on page 26.
Some characters or symbols will not be shown (and be blanked) on the display.
(Ex. “ABCå!d#” ] “ABCA D ”)
• When you press DISP while playing a conventional CD, “NO NAME” appears for the disc title/
performer and the track title.
12
Locating a track or a particular portion on a CD
¢
4
Number buttons
To fast-forward or reverse the track
Press and hold
¢, while playing a CD, to fast-forward the track.
Press and hold 4
, while playing a CD, to reverse the track.
To go to the next tracks or the previous tracks
Press
¢ briefly, while playing a CD, to go ahead to the beginning of
the next track.Each time you press the button consecutively, the beginning
of the next tracks is located and played back.
Press 4
briefly, while playing a CD, to go back to the beginning of
the current track. Each time you press the button consecutively, the
beginning of the previous tracks is located and played back.
To go to a particular track directly
Press the number button corresponding to the track number to start its
playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
13
Selecting CD playback modes
RND
RPT
INT MODE
To play back tracks at random (Random Play)
You can play back all tracks on the CD at random.
1 Press MODE while playing a CD.
“MODE” appears on the lower part of the display, and the number buttons
can work as different function buttons.
2 Press RND (Random), while “MODE” is still on the display, so that the
RND indicator lights up on the display.
Each time you press the button, CD random play mode turns on and off
alternately.
When the random mode is turned on, the RND indicator lights up on the
display and a track randomly selected starts playing.
RND
CD-CH
BBE
To play back tracks repeatedly (Repeat Play)
You can play back the current track repeatedly.
1 Press MODE while playing a CD.
“MODE” appears on the lower part of the display, and the number buttons
can work as different function buttons.
2 Press RPT (Repeat), while “MODE” is still on the display, so that the RPT
indicator lights up on the display.
Each time you press the button, CD repeat play mode turns on and off
alternately.
When the repeat mode is turned on, the RPT indicator lights up on the
display.
Track number of the currently playing track
RPT
CD-CH
BBE
14
To play back only intros (Intro Scan)
You can play back the first 15 seconds of each track sequentially.
1 Press MODE while playing a CD.
“MODE” appears on the lower part of the display, and the number buttons
can work as different function buttons.
2 Press INT (Intro), while “MODE” is still on the display.
Each time you press the button, CD intro scan mode turns on and off
alternately.
When the intro scan mode is turned on, “INT” appears on the display for
5 seconds and the track number flashes.
Track number of the currently playing track
CD-CH
BBE
Prohibiting CD ejection
OFF/0
FUNC
You can prohibit CD ejection and can lock a CD in the loading slot.
While pressing FUNC (Function), press and hold OFF/0 for more than 2 seconds.“NO EJECT”
flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected.
CD-CH
BBE
To cancel the prohibition and unlock the CD, press and hold OFF/0 for more than 2
seconds again, while pressing FUNC.“EJECT OK”flashes on the display for about 5 seconds,
and the CD is unlocked.
15
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your preference.
2
1
1
Select the item you want to adjust.
BASS
VOLUME
TREBLE
FADER
BAL
Indication
BASS
To do:
Adjust the bass
Adjust the treble
Range
–06 (min.) — +06 (max.)
TREBLE
FADER*
–06 (min.) — +06 (max.)
Adjust the front and rear speaker
balance
R06 (Rear only) — F06 (Front only)
BAL
Adjust the left and right speaker
balance
L06 (Left only) — R06 (Right only)
00 (min.) — 50 (max.)
VOLUME Adjust the volume
Note:
* If you are using a two-speaker system, set the fader level to “00.”
2
Adjust the level.
Note:
Normally + / – button works as the volume control. So you do not
have to select “VOLUME” to adjust the volume level.
16
Turning on/off the BBE function
The BBE* function restores the brilliance and clarity of the original live sound in recording,
broadcasts, etc.
When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing
high-frequency sounds to take longer to reach the ear than low frequency sounds. The BBE
function adjusts the phase relationship between the low, mid and high frequencies by adding
a progressively longer delay time to the low and mid frequencies, so that all frequencies
reach the listener’s ears at the proper time.
In addition, the BBE function boosts low and high frequencies, which loudspeakers tend to be
less efficient in reproducing, through dynamic, program-driven augmentation.When combined
with the phase compensation feature, the resulting sound has a clearer, more finely detailed
“live” presence.
* Under license from BBE Sound, Inc.
is a trademark of BBE Sound, Inc.
BBE
Each time you press BBE, the BBE function turns on and off alternately.
CD-CH
BBE
CD-CH
BBE
17
Selecting preset sound modes
You can select a preset sound adjustment suitable to the music genre.
2
1
1
2
Light “MODE” on the lower part of the display.
The number buttons can work as different function buttons.
Within
5 seconds
Select the sound control mode (SCM) you want.
Each time you press SOUND, the sound control mode (SCM) changes
as follows.
SCM BEAT
SCM SOFT
SCM POP
SCM OFF
Indication
For:
Preset values
Bass
00
Treble
00
BBE
SCM OFF
(Flat sound)
On
On
Off
Off
SCM BEAT Rock or disco music
+02
+01
+04
00
SCM SOFT Quiet background music
–03
+01
SCM POP
Light music
Notes:
• You can adjust the preset sound control mode to your preference, and store in memory.
If you want to adjust and store your original sound control mode, see “Storing your own sound
adjustments” on page 19.
• To adjust only the bass/treble reinforcement levels and BBE to your preference, see “Adjusting the
sound” on page 16 and “Turning on/off the BBE function” on page 17.
18
Storing your own sound adjustments
You can adjust the sound control modes (BEAT, SOFT, POP:see page 18) to your preference
and store your own adjustments in memory.
3-
2
BBE
3-
1
2, 4
1
1
Light “MODE” on the lower part of the display.
The number buttons can work as different function buttons.
REMEMBER you must finish the following steps while “MODE”
is still on the display. Otherwise, the setting will be canceled.
2
3
Select the sound control mode (SCM) you want.
For details, see page 18.
2
1
To adjust the bass or treble level
1 Select “BASS” or “TREBLE.”
2 Adjust the bass or treble level.
To turn on or off the BBE function
See page 17.
4
5
Press and hold SOUND.
Your adjustment made for the selected sound control mode is stored in
memory.
Repeat the same procedure to adjust other items.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 18.
19
OTHER MAIN FUNCTIONS
Setting the clock
1, 4
2, 3
2, 3
1
2
Press and hold SEL (Select) for more than 2 seconds
so that one of the PSM items appears on the display.
1
1
2
Set the hour.
1 Select “CLOCK HOUR” if not
shown on the display.
2 Adjust the hour.
3
4
2
Set the minute.
1 Select “CLOCK MIN.”
2 Adjust the minute.
Finish the setting.
To check the current clock time while the unit is turned off, press + or –.
The power turns on, the clock time is shown for 5 seconds, then the power turns off.
20
Controlling the volume automatically (Audio Cruise)
You can select the proper cruise mode for your car.
This unit change the volume level automatically (at 3 possible levels) based on the driving
speed of your car by detecting the alternator’s generating frequency (Audio Cruise).
If you want to use this mode, follow the procedures below.When shipped from the factory, this
mode is set to “CRUISE OFF.”
• CRUISE 1:
• CRUISE 2:
Select this if your car is relatively quiet.
Select this if your car is relatively loud.
The volume increase rate is twice as much as that of the CRUISE 1
setting.
• CRUISE OFF: Cancels Audio Cruise.
1, 4
3
2
1
2
Press and hold SEL (Select) for more than 2 seconds
so that one of the PSM items appears on the display.
Select “CRUISE.”
3
4
Select desired setting.
Each time you press the button, the Audio Cruise mode changes as
follows:
CRUISE 1
CRUISE 2
CRUISE OFF
Finish the setting.
21
When this function is turned on (the CRUISE indicator lights up on the display), the proper
volume level is automatically selected among the 3 possible levels according to the driving
speed, and the selected level is shown on the display.
When the driving speed increases.
When the driving speed decreases.
To adjust the volume increase rate
If you find Audio Cruise increases (or decreases) the volume either too much or too little as
the driving speed changes, you can adjust the increase rate by changing the boost level.
To change it, follow the procedure below.
1 Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2 Press
3 Press + or – to select either “CRUISE 1” or “CRUISE 2.”
4 Press ) to select “BOOST.”
¢ or 4
repeatedly until “CRUISE” appears on the display.
¢ (or 4
The current boost level also appears on the display.
5 Press + or – to select the desired boost level (among 01 to 15).
6 Press SEL again to finish the setting.
If Audio Cruise does not function correctly
You may need to store the idling speed into memory to make Audio Cruise function correctly.
NOTICE that a number of factors, such as electric power steering, wipers, power windows, air
conditioner, etc. do generate noises and, as a result, may cause Audio Cruise not to function
correctly. If this is the main cause of malfunction, connect the memory backup lead (yellow
lead) directly to the car battery to prevent these noises from affecting Audio Cruise.
1 Start the engine and let it warm up.
2 Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
3 Press
4 Press + or – to select either “CRUISE 1” or “CRUISE 2.”
5 Press ) to select “RPM SET (+OR– SET).”
¢ or 4
repeatedly until “CRUISE” appears on the display.
¢ (or 4
6 Press + or – to select the desired idling speed.
7 Press SEL again to finish the setting.
When the setting is complete, the unit automatically checks to see if Audio Cruise functions
correctly with this new idling setting. If it does not function correctly, Audio Cruise is canceled
automatically and the idling setting becomes invalid.
• If this happens, see the NOTICE above.
22
Changing the general settings (PSM)
You can change the items listed on the next page by using the PSM (Preferred Setting Mode)
control.
Basic Procedure
1, 4
3
2
1
2
Press and hold SEL (Select) for more than 2 seconds
so that one of the PSM items appears on the display.
Select the PSM item you want to adjust. (See page
24.)
3
4
Adjust the PSM item selected above.
Finish the setting.
23
1
2
3
Factory-preset See
settings
page
Set.
Select.
Back
Back
Advance
Advance
CLOCK HOUR
CLOCK MIN
CLOCK DISP
LEVEL
Hour adjustment
Minute adjustment
Clock display
Level display
Dimmer mode
1:00
20
25
25
CLOCK OFF
CLOCK ON
CLOCK ON
NORMAL
6 types (See page 25.)
DIMMER
OFF
AUTO
25
21
AUTO
ON
CRUISE
Audio cruise
CRUISE 1
CRUISE 2
CRUISE OFF
CRUISE OFF
—
RPM SET (+OR– SET)* Idling speed
800 rpm
BOOST 05
BEEP ON
22
22
25
BOOST*
Boost
BOOST 01 –15
BEEP SW
P. AMP SW
Key-touch tone
BEEP OFF
BEEP ON
Power amplifier
switch
26
P. AMP ON
P. AMP OFF
P. AMP ON
SCROLL
Scroll mode
ONCE
AUTO
26
26
ONCE
OFF
AREA
Channel interval
AREA US
AREA US
AREA EU
*
When you select “CRUISE 1” or “CRUISE 2” for Audio Cruise Mode, you can adjust these
items.
4
Press SEL to finish the setting.
24
To select the clock display
You can select either the clock or the source name to be shown on the lower part of the
display. When shipped from the factory, the clock is selected.
• CLOCK ON:
Clock
• CLOCK OFF: Source name (or station band)
To check the other information during play
Press DISP (Display). Each time you press the button, the other information (either the clock
or the source name) will be shown on the lower part of the display for a while.
To select the level meter
You can select the level meter display according to your preference. When shipped from the
factory, “NORMAL” is selected.
• NORMAL:
• HIGHWAY:
• SIDE:
Normal audio level meter
Level meter illuminates as if you are driving on a highway.
Level meter illuminates horizontally.
• RACE:
Level meter illuminates as if cars are racing.
• LEVEL OFF: Level meter stays lit and does not change its illumination.
• ALL OFF: Level meter turns off.
To select the dimmer mode
When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• AUTO: Activates Auto Dimmer.
• OFF:
• ON:
Cancels Auto Dimmer.
Always dims the display.
Note on Auto Dimmer:
Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
To turn on/off the key-touch tone
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. When shipped from the factory, the key-touch tone is activated.
• BEEP ON: Activates the key-touch tone.
• BEEP OFF: Deactivates the key-touch tone.
25
To turn on/off the power amplifier switch
You can switch off the built-in amplifier and send the audio signals only to the external
amplifier(s) to get clear sounds and to prevent internal heat buildup inside this unit. When
shipped from the factory, the power amplifier switch is turned on so that the built-in amplifier
works.
• P. AMP ON:
• P. AMP OFF:
Select this mode when not using external amplifier(s).
Select this mode when using external amplifier(s).
To select the scroll mode
You can select the scroll mode for the disc information if it consists of more than 10 characters.
When shipped from the factory, Auto Scroll mode is set to “ONCE.”
• ONCE:
• AUTO:
• OFF:
Scrolls only once.
Repeats the scroll (5-second intervals in between).
Cancels Auto Scroll.
Note:
Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP for more than 1
second.
To change the AM/FM channel intervals
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and
200 kHz for FM (AREA US settings).
You will have to change the channel intervals when using this unit in an area other than North
America and South America.
• AREA EU: Select this when using this unit in an area other than North and South America.
(9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM)
• AREA US: Select this when using this unit in North or South America. (10 kHz for AM and
200 kHz for FM)
26
Assigning names to the sources
You can assign names to station frequencies and CDs. After assigning a name, it will appear
on the display when you select the source.
Sources
Maximum number of the characters
Station frequencies Up to 10 characters (up to 30 station
frequencies including both FM and AM)
CDs*
Up to 32 characters (up to 40 discs)
* You cannot assign a name to a CD Text.
6
3
2
4
1
2
Select a source you want to assign a name to.
Press and hold SEL (Select) for more than 2
seconds while pressing DISP.
When you select a station frequency
as the source:
When you select the CD as the
source:
C
3
Select the character you want while “_” is flashing.
Each time you press the button, the character changes.
About the available characters, see page 28.
To be continued on the next page
27
4
Move the cursor to the next (or previous) character
position.
5
6
Repeat steps 3 and 4 until you finish inputting the name.
Press the button while the last selected character is
flashing.
The input name is stored in memory.
To erase the input characters
Insert spaces using the same procedure described above.
Available characters
A
K
B
L
V
5
C
D
E
F
G H
I
J
M N O P Q R
S
2
<
T
3
>
0
–
1
/
U
W X
Y
8
Z
9
4
6
7
Space
Notes:
• When you assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case,
delete unwanted names before assignment.)
• When the CD changer CH-X1200 connected, you can assign names to CDs in CH-X1200. These
names can also be shown on the display if you insert the CDs in this unit.
28
CD CHANGER OPERATIONS
We recommend that you use one of the CH-X series (ex: CH-X1200) with your unit.
If you have another CD automatic changer, consult your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K)
for connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your CD changer.
• If no discs are in the magazine of the CD changer or the discs are inserted upside
down, “NO DISC” will appear on the display. If this happens, remove the magazine and
set the discs correctly.
• If “RESET 1 - RESET 8”appears on the display, something is wrong with the connection
between this unit and the CD changer. If this happens, check the connection, connect
the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.
Playing CDs
FUNC
Number buttons
¢
4
Select the CD automatic changer.
Each time you press the button, the source changes as
described on page 5.
Playback starts from the first track of the first disc.
All tracks of all discs are played back.
Elapsed playing time
Track number
CD-CH
BBE
Disc number (then clock time:
see page 25) appears.
Note:
When a CD is in the CD changer, selecting CD changer as the source by pressing FUNC (Function)
starts CD play.
29
To fast-forward or reverse the track
Press and hold
¢, while playing a CD, to fast-forward the track.
, while playing a CD, to reverse the track.
Press and hold 4
To go to the next tracks or the previous tracks
Press
¢ briefly, while playing a CD, to go ahead to the beginning of
the next track.Each time you press the button consecutively, the beginning
of the next tracks is located and played back.
Press 4
briefly, while playing a CD, to go back to the beginning of
the current track. Each time you press the button consecutively, the
beginning of the previous tracks is located and played back.
To go to a particular disc directly
Press the number button corresponding to the disc number to start its
playback (while the CD changer is playing).
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
Ex. When disc number 3 is selected
Track number
CD-CH
BBE
Disc number
To show the CD Text information
This is possible only when connecting a JVC CD automatic changer equipped with CD Text
reading capability.
See “Playing a CD Text” on page 12.
30
Selecting CD playback modes
RND
INT MODE
RPT
To play back tracks at random (Random Play)
1 Press MODE while playing a CD.
“MODE” appears on the lower part of the display, and the number buttons
can work as different function buttons.
2 Press RND (Random), while “MODE” is still on the display, so that the
RND indicator lights up on the display.
Each time you press the button, CD random play mode changes as follows:
RND 1
RND 2
(Random 2)
(Random 1)
Canceled
Mode
RND 1
RND Indicator
Plays at random
Lights
All tracks of the current disc, then the tracks of the
next disc, and so on.
RND 2
Flashes
All tracks of all discs inserted in the magazine.
To play back tracks repeatedly (Repeat Play)
1 Press MODE while playing a CD.
“MODE” appears on the lower part of the display, and the number buttons
can work as different function buttons.
2 Press RPT (Repeat), while “MODE” is still on the display, so that the RPT
indicator lights up on the display.
Each time you press the button, CD repeat play mode changes as follows:
RPT 2
RPT 1
(Repeat 1)
(Repeat 2)
Canceled
Mode
RPT 1
RPT 2
RPT Indicator
Lights
Plays repeatedly
The current track (or specified track).
Flashes
All tracks of the current disc (or specified disc).
31
To play back only intros (Intro Scan)
1 Press MODE while playing a CD.
“MODE”appears on the lower part of the display, and the number buttons
can work as different function buttons.
2 Press INT (Intro), while “MODE” is still on the display.
Each time you press the button, CD intro scan mode changes as follows:
INT 1
INT 2
(Intro 2)
(Intro 1)
Canceled
Mode
INT 1
Indication
Plays the beginnings (15 seconds)
Of all tracks on all inserted discs.
Track number flashes
Disc number flashes (when
it is shown on the display)
INT 2
Of the first track on each inserted disc.
32
MAINTENANCE
Handling CDs
COMPACT
This unit has been designed only to reproduce the CDs bearing the
Other discs cannot be played back.
and
marks.
DIGITAL AUDIO
How to handle CDs
Center holder
When removing a CD from its case, press down the center holder of
the case and lift the CD out, holding it by the edges.
• Always hold the CD by the edges. Do not touch its recording surface.
When storing a CD into its case, gently insert the CD around the
center holder (with the printed surface facing up).
• Make sure to store CDs into the cases after use.
To keep CDs clean
A dirty CD may not play correctly. If a CD does become dirty, wipe it with
a soft cloth in a straight line from center to edge.
To play new CDs
New CDs may have some rough spots around the inner and outer edges.
If such a CD is used, this unit may reject the CD.
To remove these rough spots, rub the edges with a pencil or ball-point
pen, etc.
Moisture condensation
Moisture may condense on the lens inside the CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may malfunction. In this case, eject the CD and leave the
unit turned on for a few hours until the moisture evaporates.
CAUTIONS:
• Do not insert 8cm (3 3/16") CDs (single CDs) into the loading slot. (Such CDs cannot be
ejected.)
• Do not insert any CD of unusual shape — like a heart or flower; otherwise, it will cause a
malfunction.
• Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high
temperature and humidity. Do not leave them in a car.
• Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.)
to clean CDs.
About mistracking:
Mistracking may result from driving on extremely rough roads.This does not damage the
unit and the CD, but will be annoying.
We recommend that you stop CD play while driving on such rough roads.
33
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a
service centre.
Symptoms
Causes
Remedies
• CD cannot be played back.
CD is inserted upside down.
Insert the CD correctly.
• CD sound is sometimes
interrupted.
You are driving on rough roads.
Stop CD play while driving on
rough roads.
CD is scratched.
Change the CD.
Connections are incorrect.
Check the cords and
connections.
• Sound cannot be heard from
the speakers.
The volume level is set to the
minimum level.
Adjust it to the optimum level.
Connections are incorrect.
Signals are too weak.
Check the cords and
connections.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Store stations manually.
• Static noise while listening to
the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
Insert CD.
• “NO DISC” appears on the
display.
No CD is in the magazine.
• “RESET 8” appears on the
display.
This unit is not connected to a
CD changer correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
• “RESET 1-RESET 7” appears
on the display.
Press the reset button of the
CD changer.
• “EJECT ERR” appears on the The CD player may function
Press and hold – of the + / –
display and CD cannot be
ejected.
incorrectly.
button for more than 5 seconds.
• No message appears on the
display but CD cannot be
ejected.
While holding
reset button. Release the reset
button, then release
(Be careful not to drop the CD
when ejecting.)
¢, press the
¢.
• This unit does not work at all.
• The CD changer does not
work at all.
The built-in microcomputer may
function incorrectly due to noise,
etc.
Press the reset button on the
front panel. (See page 3.)
34
SPECIFICATIONS
AUDIO AMPLIFIER SECTION
Maximum Power Output:
CD PLAYER SECTION
Type: Compact disc player
Front: 40 watts per channel
Rear: 40 watts per channel
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Continuous Power Output (RMS):
Front: 16 watts per channel into 4 Ω, 40
to 20,000 Hz at no more than
0.8 % total harmonic distortion.
Rear: 16 watts per channel into 4 Ω, 40
to 20,000 Hz at no more than
0.8 % total harmonic distortion.
Load Impedance: 4 Ω (4 to 8 Ω allowance)
Tone Control Range:
Bass: ±10 dB at 100 Hz
Treble:±10 dB at 10 kHz
Frequency Response: 40 to 20,000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
Number of channels: 2 channels (stereo)
Frequency Response: 5 to 20,000 Hz
Dynamic Range: 96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
GENERAL
Power Requirement:
Operating Voltage: DC 14.4 volts (11 to
16 volts allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C (32°F to 104°F)
Dimensions (W x H x D):
Installation Size:
2.0 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
182 x 52 x 160 mm
(7-3/16" x 2-1/16" x 6-5/16")
Panel Size: 188 x 58 x 8 mm
(7-7/16" x 2-5/16" x 3/8")
TUNER SECTION
Frequency Range:
FM: 87.5 to 107.9 MHz
(with channel interval set to 200
kHz)
Mass:1.7 kg (3.8 lbs) (excluding accessories)
Design and specifications subject to change
without notice.
87.5 to 108.0 MHz
(with channel interval set to 50 kHz)
AM: 530 to 1,710 kHz
(with channel interval set to 10 kHz)
531 to 1,602 kHz
If a kit is necessary for your car, consult
your telephone directory for the nearest
car audio speciality shop.
(with channel interval set to 9 kHz)
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 to 15,000 Hz
Stereo Separation: 35 dB
Capture Ratio: 1.5 dB
[AM Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
35
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to Reset
Still having trouble??
USA ONLY
Call 1-800-252-5722
We can help you!
VICTOR COMPANY OF JAPAN, LIMITED
EN, SP, FR
0299MNMMDWJES
|