Version 1.10
GY-HD250U Systems Reference Manual
1
Version 1.10
Table of contents
Page
40
41
42
42
Section V Supplementary Information
VF Signal Menu
How to use Sony 26Pin Cable with KA-HD250U
How to use Sony 26Pin cable with RMP210U
GY-HD250U/KA-HD250U and JVC CCUs Power connectivity table
HD-SDI Cable Lengths
Telecast Fiber Rattler – Fiber Tx/Rx
43
43
44
45
46
47
48
49
50
51
52
54
KA-R25U Return Video Box
KA-BP250U Intermediate Plate
HD 1/3”mount bayonet lenses
V-R70P-JVC Marshall 7” LCD Studio Monitor
VC-Y250US XLR 4-pin Power Y cable
KA-P250U XLR 4-pin/20-pin Power cable
KA-V400U 6-pin/20-pin Viewfinder adapter
RM-LP25U Local Remote Control Panel
RM-HP250AU HD 26Pin CCU
VF-HP840U JVC’s Professional 8.4” Studio monitor
3
Version 1.10
Section I Short Length Multi Core Studio Configurations
Application
SD -production studio, Schools etc
DT-109
VF-P400U
w/KA-V400U
VC-PxxxU Control cable
DT-109
RM-P210U
Live video
Switcher
SD Analog
Component
DT-109
VF-P400U
w/KA-V400U
DT-109
VC-PxxxU Control cable
House
Sync
SD System Diagram
Version 1.10
SD Studio Key features and user benefits
„
The GY-HD250U w/KA-HD250U can be used to construct an economical SD studio system that produces stunning 16:9
or 4:3 SD images.
„
„
Investment is future proofed. Upgrading from an SD to an HD system will require changing the video interface only.
When replacing a GY-DV550U, the original CCU the RM-P210U; the 26pin control cable and the studio viewfinder VF-
P400U can continue to be used.
„
When needed, the GY-HD250U can be used as an ENG camera by detaching it from the KA-HD250U.
SD Composite
SD Component
Genlock, VBS
Return Video
Audio(L,R)
Intercom(2 wire or 4 wire)
GY-HD250U/KA-HD250U
RM-P210U
Call/Tally
Control
Power
Fig. 1 Signal Flow between CCU and Camera
Version 1.10
Additional Information
„
GY-HD250U View Finder menu should be set to RGB when VF-P400U is used. All VF displays are available except focus
assist
„
„
„
SD CMP available only; RM-P210U can not pass full bandwidth HD Y, R-Y, B-Y.
Genlock must be NTSC VBS only – HD Tri level sync can not be passed by RM-P210U back to the GY-HD250U.
Superimpose characters on Analog output should be turned off – otherwise they will appear at RM-P210U component
outputs.
Sony 26pin Cable can be used to connect RM-P210U with the KA-HD250U.
„
Version 1.10
SD System Components price list
Model
Description
Pro HD Camcorder
Pro HD Camcorder
Studio Adapter
4" Viewfinder
20-pin/6-pin Adapter
Camera Control Unit
Multi core Camera Cable 5M
Multi core Camera Cable 20M
Multi core Camera Cable 50M
Multi core Camera Cable 100M
Quantity
Cost
Price
Note
GY-HD250CHU
GY-HD250U
KA-HD250U
VF-P400U
0
0
0
0
0
0
0
0
0
0
$9,995.00
$10,995.00
$3,000.00
$875.00
$225.00
$1,995.00
$480.00
$1,050.00
$1,850.00
$3,250.00
$0.00 without 16X lens
$0.00 With 16X Lens
$0.00
$0.00
$0.00
$0.00
$0.00 Up to 100m
$0.00
$0.00
KA-V400U
RM-P210U
VC-P110U
VC-P112U
VC-P113U
VC-P114U
$0.00
Optional Components
Th 13X3.5BRM
Th 17X5BRM
HTs18x4.2BRM-M48
KT20x5BKRS
HZ-FM13
Fujinon Wide Angle
Fujinon Wide Angle
Fujinon 18x High Quality Lens
Canon 20x High Quality Lens
Manual Focus Control
Manual Focus Control
Manual Focus Control
Zoom Servo Control
0
0
0
0
0
0
0
0
0
0
$7,650.00
$3,300.00
$10,800.00
$9,800.00
$685.00
$685.00
$820.00
$750.00
$2,880.00
$799.00
$0.00
$0.00
$0.00
$0.00
$0.00 Fujinon 17X, 13X,17.18X
$0.00 Canon 20X
$0.00 Fujinon 16X
$0.00 Fujinon 16X
$0.00 Fujinon
$0.00
HZ-FM15
HZ FM-500
HZ-ZS13U
MS-11
ACM-12
Zoom & Focus Kit for Fuji 18X
1/2" to 1/3" Mount Converter
Total
$0.00
Third Party Components
DT-109
K109.38
Headset without connecting cable
DT-109 1.5m connecting cable
0
0
$419.00
$49.50
$0.00 BeyerDynamic
$0.00 BeyerDynamic
7
Version 1.10
V-R70P-JVC w/KA-P250U
VF-HP840U
VC-PxxxU Control cable
DT-109
RM-LP25U
(RM-LP55U/LP57U)
DT-109
RM-HP250AU
HD SDI Switcher
V-R70P-JVC w/KA-P250U
VF-HP840U
HD-SDI *
DT-109
HD-SDI*
or
VC-PxxxU Control cable
RM-LP25U
(RM-LP55U/LP57U)
DT-109
House sync
HD System Diagram with RM-HP250AU SYSTEM 1 (HD SDI)
* Either the HD-SDI outputs of the RM-HP250AU derived from the HD component signal or the HD-SDI output of the GY-
HD250U can be applied to the HD-SDI switcher inputs.
8
Version 1.10
V-R70P-JVC w/KA-P250U
VF-HP840U
VC-PxxxU Control cable
DT-109
RM-LP25U
(RM-LP55U/LP57U)
DT-109
RM-HP250AU
HD Analog Switcher
V-R70P-JVC w/KA-P250U
VF-HP840U
HD Analog
Component
DT-109
VC-PxxxU Control cable
DT-109
RM-LP25U/LP55U/LP57U
House sync
HD System Diagram with RM-HP250AU SYSTEM 2 (HD analog component)
* The component HD signal output of the RM-HP250AU can be applied to a HD component analog switcher.
9
Version 1.10
V-R70P-JVC w/KA-P250U
VF-HP840U
VC-PxxxU Control cable
DT-109
DT-109
RM-P210U
HD SDI Switcher
V-R70P-JVC w/KA-P250U
VF-HP840U
HD-SDI
DT-109
VC-PxxxU Control cable
DT-109
House sync
HD System Diagram with RM-P210U
10
Version 1.10
HD Studio Key features and user benefits
„
„
The GY-HD250U w/KA-HD250U can be used to build an economical HD studio system that produces stunning images.
Both HD component and HD-SDI video is supported giving user flexibility of using a component switcher or a HD-SDI
switcher.
„
„
„
The new RM-HP250AU gives the user the flexibility of connecting an additional local remote control to the studio system.
A live 720P or 1080i signal can be outputted depending on the user’s switcher requirements.
When replacing a GY-DV550U based studio system, the original 26pin control cable and studio viewfinder VF-P400U can
continue to be used.
„
Existing user’s 26Pin Sony Cable can be used to connect RM-HP250AU and KA-HD250U.
„
When needed, the GY-HD250U can be readily detached from the KA-HD250U(Sled) and used as an ENG camera.
SD Composite
SD Component/HD Component
Genlock, VBS/Tri-level sync
Return Video
RM-HP250AU/RM-P210U
Audio(L,R)
GY-HD250U w/KA-HD250U
Intercom(2 wire or 4 wire)
Call/Tally
RED- with RM-HP250AU
HD-SDI
Control
Power
Fig 2 HD System Signal Flow between CCU and Studio Camera
11
Version 1.10
Additional Information
„
When using a HD Monitor(VF-HP840U or V-R70P-JVC), as a view finder and a component switcher:
Turn the Analog characters. Menu setting in the GY-HD250U to OFF.
Set the GY-HD250U View Finder menu to Component.
„
When using a HD Monitor (V-R70P-JVC), as a view finder and a Digital switcher:
Turn the Analog output superimpose characters Menu setting for the HD-SDI output on the GY-HD250U to OFF.
Set the GY-HD250U View Finder menu to Component.
„
„
If a VF-P400U is used as the view finder, set the GY-HD250U’s View Finder menu to RGB.
Do not turn on Superimpose characters on the HD-SDI output.
Set GY-HD250U TALLY MENU setting to “STUDIO”.
12
Version 1.10
HD System components price List
Model
GY-HD250CHU
GY-HD250U
KA-HD250U
VF-P400U
Description
Pro HD Camcorder
Quantity
Cost
Price
$0.00 Camcorder without lens
Note
0
0
0
0
0
0
0
0
0
0
0
0
0
0
$9,995.00
$10,995.00
$3,000.00
$875.00
Pro HD Camcorder
Studio Adapter
$0.00 With 16X lens
$0.00 with Y cable up to 70m
$0.00 B & W SD VF
4" SD Viewfinder
KA-V400U
VR70P-JVC
VCY250US
KA-P250
20-pin/6-pin Adapter
7" HD LCD Monitor
Y XLR Power Cable
Delayed power cable
SD Camera Control
HD Camera Control
Camera Cable 5M
Camera Cable 20M
Camera Cable 50M
Camera Cable 100M
$225.00
$0.00 Pwr & Signal cable Availability to be determined
$1,810.00
$75.00
$0.00 RGB cable + Articulated arm
$0.00 Use when 26 Pin cable is less than 70m
$450.00
$0.00 Use when 26Pin Cable > 70m with 7" LCD Monitor
RM-P210U
RM-HP250AU
VC-P110U
VC-P112U
VC-P113U
VC-P114U
Options
$1,995.00
$3,495.00
$480.00
$0.00
$0.00 Shipping -TBA
$0.00
$0.00
$0.00
$0.00
$1,050.00
$1,850.00
$3,250.00
Th13X3.5BRM
Th17X5BRM
HTs18x4.2BRM
KT20x5BKRS
HZ-FM15
Fujinon Wide Angle
0
0
0
0
0
0
0
0
$7,650.00
$3,300.00
$10,800.00
$9,800.00
$685.00
$0.00
Fujinon Zoom Lens
$0.00
Fujinon 18x High Quality Lens
Canon 20x High Quality Lens
Manual Focus Control
Manual Focus Control
Manual Focus Control
Zoom Servo Control
$0.00
$0.00
$0.00 Canon 20X
HZ-FM13
$685.00
$0.00 Fujinon 17X, 13X
$0.00 Fujinon 16X
HZ-FM500
$685.00
HZ-ZS13U
$750.00
$0.00 Fujinon 13X,16X,17X, 18X & Canon 20X
13
Version 1.10
HD System components price List(continued)
Model
Description
1/2">1/3" Mount Converter
1/2">2/3" Mount Converter
Remote Control
Quantity
Cost
Price
Note
0
0
0
0
0
0
$799.00
$799.00
$815.00
$910.00
$0.00
ACM-12
$0.00
ACM-17
$0.00
RM-LP55U
RM-LP57U
RM-LP25U
Total
$0.00
Remote Control
$0.00
Remote Control
$0.00 Price & Shipping TBA
$0.00
Third Part Components
DT-109
K109.38
RG-59
RG-6
Headset
0
0
0
0
0
$419.00
$49.50
$0.00 Third party vendor
$0.00
1.5m DT-109 Connecting cable
HD-SDI Cable
$0.00 Belden, Canare
$0.00 Belden, Canare
$0.00 Belden, Canare
$0.00
HD-SDI Cable
RG-11
Total
HD-SDI Cable
Version 1.10
Section II Medium Length Fiber Cable Studio Configurations
Typical Applications
Medium length Fiber Cable Studio Configurations are used for EFP, Sports and Events requiring the CCU to be located
more than 100m from the Camera’s location. When multi-core cable lengths exceed 100m, the multi-Core cable weight
becomes excessive. For lengths greater than 100m a fiber cable can be used for applications that do not need power to be
delivered to the camera or a hybrid (combined fiber and copper cable) that also delivers power is used to connect the Studio
Camera to the base station. Camplex and Telecast Fiber are two companies that produce systems that use either fiber or
CAMPLEX
CAMPLEX produces economical hybrid cable connected systems that integrate with the GY-HD250U. Their system consists
of a Camera Adapter mounted on the Camera, a Hybrid Fiber Cable and a Base Station.
CP-301C/CP-701C
Camera Adapter
GY-HD250U
Base Station (CCU)
Power and Signals
Hybrid Cable
Cabling
Camplex System Diagram
The Camera Adapter with additional cabling provides a signal interface between the camera and the Hybrid Cable.
The Hybrid cable consists of a coaxial cable whose center conductor gauge depends on the customer’s power
requirements and a fiber cable. Both are enclosed in a single sheath.
The Fiber cable carries the HD-SDI optical signal back to the base station where it is converted back to an electrical signal
HD-SDI signal.
adapter.
Version 1.10
Camplex System Key features and Customer Benefit
z
z
Complex's (CP-301C and CP-701C) systems provide an economical medium cable length (up to 900m) solution.
Due to the camera adapter’s light weight (CP301C – 2lbs/CP701 -2.5 lbs) the camera can be shoulder mounted and
operated for long periods of time without fatiguing the user.
The CP-301C CCU and the CP-701C CCU primarily differ in their signal handling capabilities. The CP-701C can pass
z
Component SD signals between the camera and the base station and has a asynchronous return video path back to the
camera.
Limitations
„
„
„
Maximum cable length is limited to 900m with RG11.
The Hybrid cable becomes very heavy as the cable length increases.
If the cable is abused, internal fiber or coax can be damaged. It is not as reliable and robust as the tactical fiber cable. In
the case that the optical fiber is damaged a spare fiber that is part of the cable can be substituted.
The CP-301C can pass an HD Tri level genlock signal, but the CP-701C can not pass an HD Tri level genlock signal.
„
Version 1.10
DT-109
BKW - V mount Plate
KA-R25U
Battery Powered
Power
Signal
Cabling
CP-301C/CP-701C
GY-HD250U
Hybrid Cable- BNC and ST
Fiber connectors
RM-LP25U
(RM-LP55U/
LP57U)
HD-SDI
DT-109
HD-SDI Switcher
900m
Base Station CP301C/CP701C
Shoulder/Tripod mounted CP-301C/CP-701C studio system diagram
17
Version 1.10
SD Composite
SD Component
HD/SD SDI
Genlock(Black Burst)/Tri-level sync
Asynchronous Return Video
Program Audio 1
Program Audio 2
Intercom(2 wire or 4 wire)
Call or Tally, Call+Tally
IFB or Retrun Audio or Timecode
Control
Camera Adapter
Exclusive CP701 system only feature in red
Exclusive CP301 system only feature in blue
Power(48 watts, 4 amps)
Fig 3. Signal Flow between Camera Adapter and Base Station
18
Version 1.10
Shoulder/Tripod mountable studio components price list
Model
GY-HD250CHU
GY-HD250U
RM-LP25U
RM-LP55U
RM-LP57U
KA-R25U
Description
Quantity
Cost
Price
$0.00 Without lens
Note
Pro HD Camcorder
0
0
0
0
0
0
$9,995.00
$10,995.00
$3,995.00
$815.00
$910.00
$599.00
Pro HD Camcorder
$0.00 With 16X lens
Camera Local Remote control
Camera Local Remote control
Camera Local Remote control
Return Video Box
$0.00
$0.00
$0.00
$0.00 Return video box
Options
Th13X3.5BRM
Th17X5BRM
HTs18x4.2BRM
KT20x5BKRS
HZ-FM15U
HZ-FM13U
HZ-FM500
HZ-ZS13U
MS-11
Fujinon Wide Angle lens
Fujinon Zoom Lens
0
0
0
0
0
0
0
0
0
0
0
$7,650.00
$3,300.00
$10,800.00
$9,800.00
$685.00
$0.00
$0.00
Fujinon 18x High Quality Lens
Canon 20x High Quality Lens
Manual Focus Control
$0.00
$0.00
$0.00 Canon 20X
$0.00 Fujinon 13X, 17X
$0.00 Fujinon 16X
Manual Focus Control
$685.00
Manual Focus Control
$685.00
Zoom Servo Control
$750.00
$0.00 Fujinon 13x, 16X, 17X, Canon 20X
Zoom & Focus kit Fuji 18X lens
1/2">1/3" Mount Converter
1/2">2/3" Mount Converter
$2,880.00
$799.00
$0.00 Fujinon 18x
$0.00
ACM-12
ACM-17
$799.00
$0.00
Total
$0.00
Third party components
Model
Description
#
Cost
Price
Note
Camera Adapter + Base station +
Pwr
Camera Adapter + Base stationm
+ Pwr
Camera Adapter + Base Station +
Battery Mount
CP701
0
0
13,335
0 This price includes all necessary options
$8,984.00
$0.00 For Battery powered applications
CP301C S2
Hybrid cable
2 Fibers + Coax
0
0
0
0
$1.50
$625.00
$500.00
$425.00
$0.00 Camplex
Power Surge Absorber
Reel
$0.00 Absorbs additional current draw used
$0.00 Camplex
Interface Cabling
$0.00 Camplex Fiber $400 to $450
19
Version 1.10
VF-HP840U
DT-109
V-R70P-JVC
BKW - V mount Plate
Battery Powered
Camera Adapter
AB mount
+ Plate
GY-HD250U/KA-HD250U
Hybrid Cable
RM-LP25U
(RM-LP55U/
LP57U)
HD-SDI Switcher
DT-109
HD-SDI
48watts
Base Station
Sled Mounted GY-HD250U Studio System Diagram
20
Version 1.10
Key Features and User Benefit
„
„
„
„
The CP-301C/CP-701C Sled mounted configuration is an economical medium distance CCU solution.
This configuration enables viewing and focusing the camera images on a high definition studio monitor..
Up to 48 Watts of power is supplied to the camera and attached options at an economical price.
GY-HD250U can be quickly detached from the Sled and used as an ENG camera.
ƒ Flexibility of both hand held and tripod mounted operation.
Additional Information
„
VF menu should be set to Component.
In the CP-301C system, there is no separate return video signal. The return video signal, providing it is genlocked, can be
„
applied to the CP-301C’s Genlock input. On the camera side, the Genlock signal can be used simultaneously as a Genlock
and a return video signal. When using the CP301C’s camera adapter’s Genlock signal for Genlock and for return video, the
signal must be an NTSC VBS.
ƒ Set GY-HD250U TALLY MENU setting to “STUDIO”.
21
Version 1.10
Sled Mounted GY-HD250U studio system price list
Description
Quantity
Cost
Price
$0.00 Without lens
Note
Pro HD Camcorder
0
0
0
0
0
0
0
$9,995.00
$3,000.00
$875.00
$225.00
$1,810.00
$3,200.00
$75.00
$0.00
Studio Adapter
SD 4" B&W monitor CRT
20Pin to 6Pin Adapter
7" HD LCD Monitor
$0.00 SD View Finder
$0.00 To connect VF-P400U to sled
$0.00 Marshall HD Monitor
$0.00 Available Jan. 2008
$0.00 Distribute power to KA-HD250U and HD monitor
$0.00 Call JVC branch
8.4" HD/SD Viewfinder
Y XLR Power cable
Intermediate plate
N.C.
Camera Local Remote Control
Camera Local Remote Control
Camera Local Remote Control
0
0
0
$815.00
$910.00
$3,995.00
$0.00
$0.00
$0.00 Price & Shipping Date: TBD
Fujinon Wide Angle
0
0
0
0
0
0
0
0
0
0
0
$7,650.00
$3,300.00
$10,800.00
$9,800.00
$685.00
$0.00
Fujinon Zoom Lens
$0.00
Fujinon 18x High Quality Lens
Canon 20x High Quality Lens
Manual Focus Control
$0.00
$0.00
$0.00 Canon 20X
$0.00 Fujinon 13X, 17X
$0.00 Fujinon 16X
$0.00 Fujinon 13X, 16X, 17X, Canon 20X
$0.00 Fujinon 18X
$0.00
Manual Focus Control
$685.00
Manual Focus Control
$820.00
Zoom Servo Control
$750.00
Zoom & Focus kit Fuji 18X lens
1/2">1/3" Mount Converter
1/2">2/3" Mount Converter
$2,880.00
$799.00
$799.00
$0.00
22
Version 1.10
Sled Mounted GY-HD250U studio system price list(continued)
Third party components
Model
CP301C S5
Hybrid cable
Description
Camera System
Quantity
Cost
Price
Note
0
0
0
0
0
0
0
0
0
0
0
$10,134.00
$1.50
$0.00 Camera adapter +Base Station + Powerm+ Cabling
$0.00 Camplex/Clark RG59 - Short cable run
$0.00 Camplex/Clark RG6 Medium cable run
$0.00 Camplex/Clark RG11 Long cable run
$0.00 Camplex Absorbs additional current draw
$0.00 Camplex
2 Fibers + Coax
2 Fibers + Coax
2 Fibers + Coax
Power Surge Absorber
Reel
$2.00
$2.25
PSA-31
$625.00
$500.00
$125.00
$125.00
$419.00
$49.50
Q-X2
Anton Bauer Mount plate
IDX Mount Plate
Head Set
$0.00 For mounting CP301C to back of sled
$0.00 For mounting CP301C to back of sled
$0.00 Beyerdynamic
P-V
DT-109
K109.38
Total
DT-109 Connecting cable
$0.00
$0.00
23
Version 1.10
Section III Long Length Fiber Cable connected Studio Configurations
Telecast Fiber
Telecast Fiber also produces a fiber connected CCU. Their system consists of a Camera Adapter(Copper Head) , a Power
Module (Power Plus) connected to the GY-HD250U; a Hybrid Fiber Cable connects the Camera adapter to the Base Station
and an optional Power module. This Configuration can be operated with cable lengths of up to 2K meters
GY-HD250U
Power Module
Base Station
Camera Adapter
Power Unit
SMPTE 311
HYBRID Cable
Telecast Fiber system with Power
The Camera Adapter provides a signal interface between the camera and the two fibers inside the Hybrid Cable. The Power
module converts the 250V AC signal on the copper conductors inside the Hybrid cable to 12V Camera power. The two fibers
One fiber strand is dedicated to carrying the HD-SDI signal from the camera back to the base station.
The second fiber strand carries all of the other required signals between the camera adapter and the base station.
Key Features and Customer Benefit
„
„
„
„
Up to 150Watts of power is supplied to the studio camera and attached accessories.
Telecast Fiber system can pass a both a SD VBS or a HD Tri level sync Genlock signal.
Flexibility of Hand held or Tripod mounted operation
GY-HD250U can be powered and operated with cable lengths up to 2K meters.
Version 1.10
KA-R25U
DT-109
Signal
Cabling
Power Plus
Camera
Adapter
GY-HD250U
RM-LP25U
(RM-LP55U/
LP57U)
SMPTE 311
Hybrid Cable
HD-SDI Switcher
DT-109
HD-SDI
Up to 2K meters
Power Plus
Base Station
Hand Held/w power studio system diagram
Version 1.10
HD/SD SDI
Fig 4 Signal Flow between Camera Adapter and Base Station
Version 1.10
Hand Held/Tripod mounted with Power studio system price list
GY-HD250U
RM-LP55U
RM-LP57U
RM-LP25U
KA-R25U
Pro HD Camcorder
0
0
0
0
0
$10,995.00
$0.00 With 16X lens
$0.00
Camera Local Remote Control
Camera Local Remote Control
Camera Local Remote Control
Return Video Box
$815.00
$910.00
$0.00
$3,995.00
$599.00
$0.00 Joystick
$0.00
Options
Th13X3.5BRM
Fujinon Wide Angle
0
$7,650.00
$0.00
Th17X5BRM
HTs18x4.2BRM
KT20x5BKRS
HZ-FM15U
HZ-FM13U
HZ-FM500
HZ-ZS13U
MS-11
Fujinon Zoom Lens
0
0
0
0
0
0
0
0
0
$3,300.00
$10,800.00
$9,800.00
$685.00
$0.00
Fujinon 18x High Quality Lens
Canon 20x High Quality Lens
Manual Focus Control
$0.00
$0.00
$0.00 Canon 20X
$0.00 Fujinon 13X, 17X
$0.00 Fujinon 16X
$0.00 Fujinon 13X, 16X, 17X, Canon 20X
$0.00 Fujinon 18X
$0.00
Manual Focus Control
$685.00
Manual Focus Control
$820.00
Zoom Servo Control
$750.00
Zoom & Focus kit Fuji 18X lens
1/2' > 1/3" Mount Converter
$2,880.00
$799.00
ACM-12
ACM-17
Total
1/2">2/3" Mount Converter
0
$799.00
$0.00
$0.00
Third Party Components
Copperhead+
Base Station
Camera Tx/Rx
0
$15,000.00
$0.00 Telecast Fiber
Reel
0
0
0
$500.00
$4,500.00
$1.45
$0.00 Telecast Fiber
Power Plus
150 Watt supply
Has 2 fibers + copper for power
$0.00 150W power module at base station and at camera
$0.00 Telecast Fiber Cost per foot
SMPTE hybrid
cable
Additional Camera cabling
0
$500.00
Telecast Fiber $400 to $600
$0.00
Total
27
Version 1.10
V-R70P-JVC
DT-109
Intermediate
mount plate
Camera
Adapter
Power Plus
GY-HD250U
SMPTE 311
Hybrid Cable
RM-LP25U
(RM-LP55U/
LP57U)
HD-SDI Switcher
DT-109
HD-SDI
Up to 2K meters
Power Plus
Sled Mounted/w Power studio system diagram
28
Version 1.10
Telecast System Key Features and User Benefit
„
„
„
„
Sled mounted configuration provides reliable CCU camera operation using SMPTE approved hybrid cable.
This configuration enables viewing and precise focusing of the camera images on a high definition studio monitor..
Up to 150Watts of continuous power and 200Watts of peak power is supplied to the camera and attached accessories.
GY-HD250U can be quickly detached from the Sled and used as an ENG camera.
„
VF menu should be set to Component.
„
Set GY-HD250U TALLY MENU setting to “STUDIO”.
29
Version 1.10
Sled mounted/w power studio system components price list
GY-HD250CHU
GY-HD250U
KA-HD250U
VF-P400U
KA-V400U
VR70P-JVC
VF-HP840U
RM-LP55U
RM-LP57U
RM-LP25U
KA-BP250
Pro HD Camcorder
0
0
0
0
0
0
0
0
0
0
0
$9,995.00
$10,995.00
$3,000.00
$875.00
$225.00
$1,810.00
$3,200.00
$0.00 Camcorder without lens
$0.00 With 16X lens
Pro HD Camcorder
Studio Adapter
$0.00 with Y cable up to 70m
$0.00 B & W SD VF
4" SD Viewfinder
20-pin/6-pin Adapter
7" HD LCD Monitor
$0.00 Pwr & Signal cable Availability to be determined
$0.00 RGB cable + Articulated arm
$0.00 Available Jan. 2008
$0.00
8.4" HD/SD Viewfinder
Camera Local Remote Control
Camera Local Remote Control
Camera Local Remote Control
Intermediate Plate
$815.00
$910.00
$3,995.00
N.C.
$0.00
$0.00 Price: TBD
$0.00 Call JVC branch
Fujinon Wide Angle
Th13X3.5BRM
Th17X5BRM
HTs18x4.2BRM
KT20x5BKRS
HZ-FM15
0
0
0
0
0
0
0
0
0
0
$7,650.00
$3,300.00
$10,800.00
$9,800.00
$685.00
$0.00
Fujinon Zoom Lens
$0.00
Fujinon 18x High Quality Lens
Canon 20x High Quality Lens
Manual Focus Control
Manual Focus Control
$0.00
$0.00
$0.00 Canon 20X
$0.00 Fujinon 17X, 13X
$0.00 Fujinon 16X
$0.00 Fujinon
$0.00
HZ-FM13
$685.00
HZ-FM500
MS-11
$685.00
Zoom & Focus Kit 18X
$2,880.00
$799.00
ACM-12
1/2">1/3" Mount Converter
2/3">1/3" Mount Converter
ACM-17
$799.00
$0.00
30
Version 1.10
Sled mounted/w power studio system components price list(continued)
Third Party Components
Model
Description
Camera adapter + base station
Reel
Quantity
Cost
Price
$0.00
$0.00
Note
Copperhead
0
0
0
0
0
0
0
0
0
0
$15,000.00
$500.00
$4,500.00
$1.45
Power Plus
150 Watt supply
$0.00 power module at base station and at camera
$0.00 Cost per foot
SYMPTE Hybrid cabHas 2 fibers + copper for power
Camera cabling
$500.00
$125.00
$125.00
$419.00
$49.50
$0.00 $400 to $600 Telecast Fiber
$0.00 For Mounting Copperhead
$0.00 For Mounting Copperhead
$0.00 Beyerdynamic
Q-X2
Anton Bauer Plate
P-V
IDX Mount plate
DT-109
K109.38
MS-11
Total
Head Set
1.5m DT-109 Connecting cable
Zoom & Focus kit Fujinon 18X
$0.00
$2,880.00
$0.00 Fujinon 18X
$0.00
31
Version 1.10
Telecast Fiber CCU locally Power
For applications requiring light weight and long cable lengths of up to 20K meters, Telecast Fiber’s Camera Adapter (Copper
Head) can be connected to the base station via two Tactical fibers. Power to the camera can be supplied via a battery, an
off-board four-pin XLR power supply or on-board AC Power supply.
GY-HD250U
Camera Adapter
Base Station
Tactical Fiber
Cabling
Extremely long length Telecast Fiber Studio System
There are two fibers contained within the Tactical fiber cable. One fiber is used to carry the HD-SDI signal between the
camera and the Base station. The second fiber carries all of the other required signals between the Camera Adapter and the
Base station. Power must be supplied either locally or via an attached battery. One fiber contains the HD-SDI signal. The
second fiber contains all of the other required signals.
32
Version 1.10
KA-R25U
DT-109
Titan70
Dionic 90/160
Signal Cabling
Camera Adapter
GY-HD250U
HD-SDI
Tactical 2 fiber
HD-SDI Switcher
RM-LP25U
(RM-LP55U/
LP57U)
DT-109
Up to 20K meters
Base Station
Hand Held battery powered studio system diagram
33
Version 1.10
Hand Held battery powered studio system components price list
GY-HD250CHU
GY-HD250U
RM-LP55U
RM-LP57U
RM-LP25U
KA-R25U
Pro HD Camcorder
0
0
0
0
0
0
$9,995.00
$10,995.00
$815.00
$0.00 Without lens
Pro HD Camcorder
$0.00 With 16X lens
Camera Local Remote Control
Camera Local Remote Control
Camera Local Remote Control
Return Video Box
$0.00
$0.00
$0.00
$0.00
$910.00
$3,995.00
$599.00
Options
Th13X3.5BRM
Th17X5BRM
HTs18x4.2BRM
KT20x5BKRS
HZ-FM15U
HZ-FM1U3
HZ-ZS13BU
MS-11
Fujinon Wide Angle
0
0
0
0
0
0
0
0
0
0
$7,650.00
$3,300.00
$10,800.00
$9,800.00
$685.00
$0.00
Fujinon Zoom Lens
$0.00
Fujinon 18x High Quality Lens
Canon 20x High Quality Lens
Manual Focus Control
$0.00
$0.00
$0.00 Canon 20X
Manual Focus Control
$685.00
$0.00 Fujinon 13X, 17X
Zoom Servo Control
$750.00
$0.00 Fujinon 13X, 16X, 17X, Canon 20X
Zoom & Focus kit Fuji 18X lens
1/2">1/3" Mount Converter
2/3">1/3" Mount Converter
$2,880.00
$799.00
$0.00 Fujinon 18X
ACM-12
$0.00
$0.00
$0.00
ACM-17
$799.00
Total
Third Party Components
Copperhead
Camera Adapter + Base station
0
0
0
0
0
$15,000.00
$1.35
$0.00 Telecast Fiber
Tactical Fiber 2
2 fibers in cable
Reel
$0.00 Telecast Fiber cost per foot
$0.00 Telecast Fiber
$500.00
$500.00
$500.00
Hermaphrodite connectors
Camera cabling
$0.00 Telecast Fiber Need two per system
Telecast Fiber $400 to $600
$0.00
Total
Version 1.10
VF-HP840U
Dionic 90/160
Titan70
DT-109
or
Camera Adapter
Intermediate
mount plate
GY-HD250U
Tactical 2 fiber
RM-LP25U
(RM-LP55U/
LP57U)
HD-SDI Switcher
DT-109
HD-SDI
Up to 20K meters
Base Station
Sled Mounted with battery or off board of on board AC power studio system diagram
Version 1.10
Sled Mounted with battery power studio system components price list
Model
GY-HD250CHU
GY-HD250U
KA-HD250U
VRP70-JVC
VF-HP840U
VCY250US
RM-LP55U
RM-LP57U
RM-LP25U
KA-BP250
Description
Quantity
Cost
Price
Note
Pro HD Camcorder
0
0
0
0
0
0
0
0
0
0
$9,995.00
$10,995.00
$3,000.00
$1,810.00
$3,200.00
$75.00
$0.00 Without lens
Pro HD Camcorder
$0.00 With 16X lens
$0.00
Studio Adapter
7" HD LCD Monitor
$0.00
8.4" HD/SD Viewfinder
Y XLR power cable
$0.00 Available Jan. 2008
$0.00 Distribute pwr to Sled + Monitor
Camera Local Remote Control
Camera Local Remote Control
Camera Local Remote Control
Intermediate plate
$815.00
$910.00
$3,995.00
N.C.
$0.00
$0.00
$0.00 Price:TBD
$0.00 Call JVC branch
Options
Th13X3.5BRM
Th17X5BRM
Fujinon Wide Angle
Fujinon Zoom Lens
0
0
0
0
0
0
0
0
0
0
$7,650.00
$3,300.00
$10,800.00
$9,800.00
$685.00
$0.00
$0.00
HTs18x4.2BRM-M48Fujinon 18x High Quality Lens
$0.00
KT20x5BKRS
HZ-FM15U
HZ-FM13U
HZ-ZS13BU
MS-11
Canon 20x High Quality Lens
Manual Focus Control
$0.00
$0.00 Canon 20X
$0.00 Fujinon 13X, 17X
$0.00 Fujinon 13X, 16X, 17X, Canon 20X
$0.00 Fujinon 18X
$0.00
Manual Focus Control
$685.00
Zoom Servo Control
$750.00
Zoom & Focus kit Fujinon 18X
1/2">1/3" Mount Converter
2/3">1/3" Mount Converter
$2,880.00
$799.00
ACM-12
ACM-17
$799.00
$0.00
Version 1.10
Sled Mounted with battery power studio system components price list
Third Party Components
Model
Copperhead
Tactical Fiber 2
Description
Camera adapter + base station
2 fibers incable $1.5/ft
Reel
Quantity
Cost
Price
$0.00
Note
0
0
0
0
0
0
0
0
0
$15,000.00
$1.35
$0.00 cost per foot
$0.00
$500.00
$500.00
$500.00
$125.00
$125.00
$419.00
$49.50
Hermaphrodite connectors
Camera cabling
$0.00 Need two per system
$0.00 $400 to $600 Telecast Fiber
$0.00 For Mounting Copperhead
$0.00 For Mounting Copperhead
$0.00 Beyerdynamic
$0.00
Q-X2
Anton Bauer Plate
P-V
IDXMount plate
DT-109
K109.38
Total
Head Set
1.5m DT-109 Connecting cable
$0.00
37
Version 1.10
Section IV POV System configuration
GY-HD250CHU/200CHU
HD SDI (BNC or Fiber)
or Component
MD lens
Camera control
Live Switcher HD-SDI or HD CMP
ESI P/T head
CAT 5 cable
ES960379-xxx
ESI Control Extender
Model 55 Base
RM-LP55U
POV Pan/Tilt System
38
Version 1.10
Key features and user benefits
Affordable HD POV pan tilt system replacement for the SD POV KY-560U system. If user is converting form a SD Pan Tilt
system some of the existing components such as Pan/Tilt controller, cables, power supplies, etc. can be reused.
„
„
„
„
„
A live 1080i or 720P60 HD-SDI or HD Component signal can be outputted and applied to the switcher.
Cameras can be controlled from up to 2000 ft.
When needed the GY-HD250U/GY-HD200U can be easily used as an ENG camera by detaching it from the Pan/Tilt head.
Upon request ESI can supply camera power to the camera from the Pan/Tilt head.
POV System Components Price List
Model
GY-HD250CH
GY-HD200CHU
Th17x5BMDU
RM-LP55U
Options
Description
Quantity
Cost
Price
Note
Pro HD Camcorder
0
$9,995.00
$7,995.00
$4,000.00
$815.00
0 Camcorder head
0
Pro HD Camcorder
Fujinon 17x MD Lens
Local Remote Control Unit
0
0
0 Motorized Lens
0 Remote control
ACM-12
1/2">1/3" Mount Converter
1/2">2/3" Mount Converter
0
0
$799.00
$799.00
0
0
0
ACM-17
Total
Third Party Components
DPT130
Pan/Tilt Head
0
0
0
0
$5,735.00
$3,950.00
$2.15
0 from ESI
Model 180
ES960379-xxx
IA60a
Pan/Tilt Controller
0 Controls up to 4 P/T heads
0 price per foot of cable ESI
0 for GY-HD200/250
CAT5 cable (RS-422 Cable)
IDX Battery Charger/Supply
Base Unit
$395.00
$1,020.00
ase
Model 55 B
0 ESI Camera remote control extender – extends up to 4
RM-LP55U
Model 55 Cam unit RS-422 to RS232C Converter
Total
0
$305.00
0 One for each camera in system.
0
39
Version 1.10
Section V Supplementary Information
VF Signal Menu
VF
Y, Pr, Pb
Mode
Y, Pr, Pb
20-Pin out
Eng VF
Signal
RGB
CPS
CMP
Y
Y, Pr, Pb
No Output
Y, Pr , Pb 720p60
No Output
Y, Pr, Pb 480i
720p60
RGB 480i
CPS 480i
OK
No visible video
No visible video
No visible video
HDV
Y, Pr, Pb 720p60
Y 480i
RGB
CPS
CMP
Y
RGB
CPS
OK
No output
Y, Pr, Pb 480i
No output
No visible video
No visible video
No visible video
DV
Y, Pr, Pb
480i
480i
Y
40
Version 1.10
How to use Sony 26Pin Cable with KA-HD250U
1. Disconnect the CABLE from the CN3 on the KA-HD250U’s MAIN board *.
2. Reconnect cable to CN4 on the MAIN board.
* See service manual for disassembly instructions
CN3
CN4
41
Version 1.10
How to use Sony 26Pin cable with RM-P210U
1- Setup for Sony Cable
Remove the top-cover and change the setting of S35 & S36 dip-switch blocks
located on the 26-pin connector board.
(a) S35: All switches must be set UP.
(b) S36: All switches must be set DOWN.
2- Adjustment
Re-adjustment of the transmit Voltage (refer to SM).
(a) VOLT ADJ 15V: adjust to 15VDC +/- 0.2V
(b) VOLT ADJ 17V: adjust to 16VDC +/- 0.2V
(c) VOLT ADJ 19V: adjust to 16VDC +/- 0.2V
Note 1: If the Voltage is not correct, the viewfinder may be damaged due to over heating.
Note 2: Receive Voltage at pin-A and pin-B of the 26-pin MUST be lower than 15V. If the voltage exceeds 15VDC, adjustment
of (a) “VOLT ADJ 17V” and (b) “VOLT ADJ 19V” must be re-adjusted from 16VDC to 15VDC.
GY-HD250U/KA-HD250U and JVC CCUs Power connectivity table
RM-P210U
RM-P200U
RM-P300U
VF-P400
VF-P550B
VF-P400
VF-P550B
VF-P400
VF-P550B
20m(VC-P112)
50m(VC-P113)
100m(VC-P114)
Operation
Operation
Operation
OK
OK
OK
OK
OK
OK
NG
NG
NG
NG
NG
NG
OK
OK
NG
OK
OK
NG
42
Version 1.10
HD-SDI Cable Lengths
RG-11
RG-7
150
125
100
80
500
400
330
260
RG-6
RG-59
Telecast Fiber Rattler – Fiber Tx/Rx
The rattler Tx and Rx converts a electrical digital signal to an optical signal at the Tx end and from a optical signal to a digital
signal at the Rx end. It is used to extend the transmission distance of a HD/SD SDI signal up to 30K meters
Up to 30km
ST Connection
5- 15v
5- 15v
Rx
$1000
$1000
43
Version 1.10
Section VI Accessories
Routes Camera video or Return video to ENG view finder
controlled by Lens Return button requires third party cabling.
Set camera TALLY MENU to “STUDIO”.
Return Video Box
Camera
VF out
VF in
Ret_(CTRL)
Ret(in)
Version 1.10
KA-BP250 Intermediate Plate (handled by JPC)
Back of
KA-HD250U
Intermediate Plate
AB Mount plate
IDX Plate - JVC-PV
Four screws to mount plate onto back of KA-HD250U
The intermediate plate mounts on the back of the KA-HD250U. To this plate either an Anton Bauer of an IDX mount plate
can be attached. The Camplex or Telecast Fiber Camera adapter can then be attached to the KA-HD250U.
· Enables mounting an Anton Bauer or IDX Mount on the back of the KA-HD250U
· AB Mount plate: QX2
· IDX Mount plate: JVC-PV
· Intermediate Plate Part TBD
CONTACT : JVC Professional for availability of plate.
Version 1.10
HD 1/3”mount bayonet lenses
Focal Length
Model
Angle of View
74º - 6.3º
51º - 3.2º
55º - 3.3º
55º - 3.3º
63º - 4.0º
52º - 2.8º
Filter Screw
IRIS Range
mm
Th13X3.5BRM
3.5-46
82mmx0.75mm
82mmx0.75mm
82mmx0.75mm
82mmx0.75mm
82mmx0.75mm
82mmx0.75mm
F1.4 – F16
F1.4 – F16
F1.4 – F16
F1.4 – F16
F1.4 – F16
F1.4 – F16
Th16X5.5BRM
Fujinon
5.5-88
Th17X5BRM
Fujinon
5.0-85
5.0-85
Th17X5BRD
Fujinon
HTs18X4.2BRM
Fujinon
4.2-76
KT20X5KRS
Canon
5.0-100
Version 1.10
V-R70P-JVC Marshall 7” LCD Studio Monitor (USA exclusive model)
·
HD/SD Compatible
§
·
800H x 480V Resolution
Analog Inputs –
§
§
§
·
Composite
Component (3 BNC with loop through outputs)
Y/C
Blue Screen mode
·
4:3 Aspect Markers
·
Built-in Tally LEDs
·
·
·
·
V-mount plate for Battery power
JVC exclusive 16X9, 4:3, 16:9 + 4:3 Safety Markers
12DV AC Power Supply with XLR cable
¼”-20 mounting plate – Provides mounting LCD to NOGA arm
V-R70P-JVC Kit Contents
Contents of V-R70P-JVC
•
•
•
•
RGB Cable
Noga Arm
Power supply
Hood
47
Version 1.10
VC-Y250US XLR Power Y cable (handled by JPC)
Used to supply the KA-HD250U’s power to the GY-HD250U and the attached monitor.
Use when 26-pin control cable is less than 70 meters.
V-R70P-JVC
GY-HD250U
Y Power cable
YC-Y250US
Noga
Arm
KA-HD250U
48
Version 1.10
KA-P250U
20Pin to 4pin XLR power cable
ƒ Applies the 12v power outputted by the KA-HD250U’ on its 20pin connector to an attached monitor.
ƒ Use of this cable ensures reliable powering up of the GY-HD250U and the attached monitor.
ƒ Should be used if the 26Pin multi core cable exceeds 70 meters
V-R70P-JVC
XLR 4 Pin
Noga Arm
20 Pin
KA-HD250U
49
Version 1.10
KA-V400U
Enables owners of VF-P400 to reuse their SD VF with a KA-HD250 studio adapter
This cable supplies video and power to the VF-P400U from the KA-HD250U.
The built in RGB matrix circuit allows the VF-P400U to display all VF functions except focus assist.
VF-P400U
6 Pin
KA-V400U
20 Pin
KA-HD250U
50
Version 1.10
RM-LP25U
Local remote control panel with granular control of the GY-HD250U’s video image. Includes a robust joystick for
control of IRIS and Master Black.
To use all of the RM-LP25U’s features the GY-HD250U firmware must be updated. The GY-HD250U has the
proper firmware if the camcorder has a “Tally” menu. The “Tally” menu item should be on page two of the GY-
HD250U’s “Others” menu. If the “Tally” menus is not there the camcorder’s firmware should be updated. To
update the camcorder’s firmware visit JVC’s professional products website at http://pro.jvc.com/ Click on the
support tab; then click on the firmware update link. Follow the firmware update page instructions.
Interface cable - 5m cable with mini-din male connector
9V supply voltage
2W power dissipation
Male 6pin mini din pin out
Copperhead base station
RM-HP250AU
6pin mini din to
DB9
6pin mini din to
5m /6pin mini din
DB9
5m /6pin mini din
5m /6pin mini din
Cable made by system integrator
RM-LP25U
RM-LP25U
RM - LP25U Interconnect Diagram
51
Version 1.10
RM-HP250AU – Available Nov 2007
HD/SD 26Pin CCU – HD equivalent of the RM-HP210U with expanded capabilities:
New Features
ƒ HD/SD – component outputs
ƒ Genlock – BB or HDTV Trilevel sync
ƒ 6pin mini DIN – Local remote control panel port
ƒ Expanded Camera menu access
Accessories not included:
ƒ 26Pin cable
- VC-Pxx
ƒ Remote Control Panels – RM-LP55, RM-LP57,RM-LP25, RM-LP35
Firmware Upgrade:
Firmware upgrade of GY-HD250U is required for the new camera control features introduced by the RM-HP250AU to be activated.
To check if your camcorder has the required firmware visit JVC’s professional products website at http://pro.jvc.com/;
click on the support tab; then click on the firmware update link. Follow the firmware update page instructions.
26pin cable
VC-P110U -5m
VC-P112U -20m
VC-P113U -50m
VC-P114U -100m
Cable Coupler
KA-280U *
* Max cable length with
extension is 100m
52
Version 1.10
RM-HP250AU
26Pin
GY-HD250U w/Sled
or
6pin Hirose din
to 6pin Mini din
or
5m /6pin mini din
Copperhead base station
RM-LP25U/55/57
or
RM-LP35U)
Cable made by system integrator
Camplex Base station
RM-HP250AU Interconnect Diagram
53
Version 1.10
VF-HP840U -
Color Studio View Finder - Available Jan 2008
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
16:9 mode - 1024 X 576 pixels
Multi Format monitor –HD/SD 60Hz/50Hz SD RGB, HD/SD CMP, Y,
1:1 pixel display mode
Return video input – B&W: CPS or HD Y
PWR requirements – 12V, 12W
20Pin - Signal/Power input
Front and rear Tally light
Power Input – XLR or 20Pin KA-HD250U VF cable
Built in:
1. Aspect and safety zone markers
2. Customizable Zebra settings
3. Focus assist – Red, Green, Blue
Included Accessories:
ƒ
ƒ
Hood
20Pin KA-HD250U VF cable
20Pin GY-HD250 VF cable - Model and Part Number TBA
ƒ
Firmware Upgrade:
Firmware upgrade of GY-HD250U is required for the VF-HP840U return video switching and
tally display to work. To check if your camcorder has the required firmware visit JVC’s
the firmware update link. Follow the firmware update page instructions.
Version 1.10
VF-HP840U
20Pin KA-HD250U VF cable
Carries VF Video and Power
Version 1.10
VF-HP840U
20Pin to 20Pin VF cable
VF Video
BNC - Ret Video
The Model name of Cable TBA
OR
CP301C
Y XLR Power Cable
YC-Y250US
VF-HP840U without KA-HD250U Interconnect Diagram
Version 1.10
57
|