Jensen MP6512i User Manual

MP6512i  
TABLE OF CONTENTS  
Introduction ..............................................................................................1  
Installation ................................................................................................2  
Wiring .......................................................................................................5  
Front Panel Release ................................................................................6  
Operation .................................................................................................7  
Tuner Operation .....................................................................................10  
CD Player Operation ..............................................................................12  
MP3/WMA Operation .............................................................................13  
Satellite Radio Operation .......................................................................17  
iPod Operation .......................................................................................19  
Remote Control ......................................................................................20  
Care and Maintenance ...........................................................................21  
Troubleshooting .....................................................................................22  
Specifications .........................................................................................23  
i
MP6512i  
ii  
MP6512i  
INTRODUCTION  
Congratulations on your purchase of the Jensen MP6512i Mobile Receiver.  
It’s a good idea to read all of the instructions before beginning the  
installation. We recommend having your Jensen MP6512i installed by a  
reputable installation shop.  
SD Card - Playback of MP3 and WMA files  
3.5mm Audio Only Input  
Chassis  
Detachable Faceplate  
1.0 DIN (Import / ISO-DIN Mountable)  
8 Character / Segment Type LCD Display  
Features  
CD / MP3 / WMA  
General  
ID3 Tag Compatible  
Last Position Memory  
Infrared Remote Control  
Programmable Volume Control  
MediaPlex AudioCore offers Adjustable Bass, Midrange and Treble  
Center Frequencies as well as Bass and Midrange Q Adjustments  
Five Preset EQ Curves  
Loudness  
Rotary Encoder Audio Control  
Beep Tone Confirmation (On-OFF Option)  
Variable Subwoofer Line Output w/ Multiple X-over Frequency Settings  
Front and Rear Line Output  
Directory Search (MP3 / WMA Only)  
MP3/WMA search by Track, File and Character  
Audible Forward / Reverse Track Search  
Random, Repeat and Intro  
Play, Pause, Stop, Next Track and Previous Track  
ESP Buffer (Electronic Shock Protection)  
AM-FM  
RDS-Radio Data System  
USA / Europe Frequency Spacing  
30 Station Presets (18 FM / 12 AM)  
Auto Stereo / Mono  
Local / Distance  
Auto Store / Preview Scan  
200-Ohm Preamp Line Outputs  
2VRMS Line Outputs  
Optional Accessories  
• jLinkCable - iPod interface Cable  
Sat Radio Ready  
Compatible with XM and Sirius Tuners (Sold Separately)  
Requires XMDJEN100 and JXMC Cables (Sold Separately)  
Satellite Channel Name, Category, Artist, or Song Title can be  
displayed  
iPod  
JLinkDirect - High Speed Direct Connect Interface To Access iPod  
Playlists, Artists, Albums, Songs.  
Intuitive Interface for Easy iPod Navigation  
Power Management Charges iPod While Connected  
Requires jLinkCable (Sold Separately)  
2
MediaLink  
Under Dash Interface Allows Portable Media Devices to be Connected  
MediaLink2 Includes the Following connectivity:  
jLinkDirect 8-pin DIN for iPod  
USB - Supports Hard Drives and Flash Memory Drives  
1
MP6512i  
Kit Installation  
CAUTION: For proper operation of the CD player, the chassis must be  
mounted within 20° of horizontal. Make sure the unit is mounted within  
this limitation.  
If your vehicle requires the use of an installation kit to mount this radio,  
follow the instructions included with the installation kit to attach the radio to  
the mounting plate supplied with the kit.  
1. Wire and test the radio as outlined in the Mounting Sleeve Installation  
instructions.  
2. Install the radio/mounting plate assembly to the sub-dashboard  
according to the instructions in the installation kit.  
3. Attach the support strap to the radio and dashboard as described in the  
Universal Installation instructions.  
4. Place the radio in front of the dashboard opening so the wiring can be  
brought through the mounting sleeve. Follow the wiring diagram  
carefully and make certain all connections are secure and insulated  
with wire nuts or electrical tape. See “Wiring” on page 5. After  
completing the wiring connections, turn the unit on to confirm operation  
(vehicle ignition must be on). If the unit does not operate, re-check all  
wiring until the problem is corrected.  
4. Replace the dashboard trim panel.  
5. Make sure the radio is right-side up, then  
ISO Installation  
SPRING CLIP  
carefully slide the radio into the mounting  
This unit has threaded holes in the chassis  
side panels which may be used with the  
original factory mounting brackets of some  
vehicles to mount the radio to the  
dashboard. Please consult with your local  
car stereo shop for assistance on this type  
of installation.  
sleeve until it is fully seated and the spring clips  
lock it into place.  
6. Secure the rear of the unit to the car body  
using the mounting bolt and rubber cushion.  
7. Test the radio using the Operating Instructions  
that follow.  
1. Remove the existing factory radio  
from the dashboard or center console  
mounting. Save all hardware and  
BEND TABS  
brackets as they will be used to mount the new radio.  
2. Carefully unsnap the plastic frame from the front of the new radio  
chassis. Remove and discard the frame.  
3. Remove the factory mounting brackets and hardware from the existing  
radio and attach them to the new radio. Do not exceed M5 x 9 MM  
maximum screw size. Longer screws may damage components inside  
the chassis.  
MOUNTING  
SLEEVE  
RUBBER  
CUSHION  
MOUNTING BOLT  
RADIO  
4. Wire the new radio to the vehicle as outlined in the Universal Installation  
instructions.  
TRIM RING  
5. Mount the new radio assembly to the dashboard or center console  
using the reverse procedure of step 1.  
Fuses  
When replacing a fuse, make sure the new fuse is the correct type and  
amperage. Using an incorrect fuse could damage the radio.  
Reconnect Battery  
When wiring is complete, reconnect the battery negative terminal.  
3
MP6512i  
Removing the Radio  
To remove the radio after installation,  
remove the trim ring by lifting in the  
center and pulling it off from either  
side. Insert the removal keys straight  
back until they lock, then pull the  
radio out. If removal keys are inserted  
at an angle, they will not lock properly  
and will not release the unit.  
Technical Assistance  
If you require assistance, contact Technical Support at 1-800-323-4815  
from 9:00am to 6:00pm EST Monday through Friday.  
4
MP6512i  
FRONT PANEL RELEASE  
The open button (1) releases the mechanism that holds the front panel to  
the chassis.  
Detaching the Front Panel  
To detach the front panel:  
1. Press and hold the power button (2) to turn the unit off.  
2. Press and hold the open button (1). The panel will slide down.  
3. Pull to release the right side of the panel.  
4. Pull the left side of the panel to remove it.  
5. After removing the front panel, store it in the supplied carrying case and  
take it with you when you leave the car.  
The motorized mechanism will close automatically after 10 seconds.  
Re-attaching the Front Panel  
To re-attach the front panel, make sure the electrical terminals on the back  
of the panel are free of dust and dirt, as debris could cause intermittent  
operation or other malfunctions. Position the right side of the panel in place  
until correctly engaged, then lightly press the left side of the panel until the  
mechanism locks it into place.  
6
MP6512i  
OPERATION  
Power  
Press the power button (2) to turn the unit on. Press and hold the power  
MP6512i  
button again to turn the unit off.  
UNIVERSAL SERIAL BUS  
/
SAT  
READY  
NOTE: LCD panels may take longer to respond when subjected to cold  
temperatures for an extended period of time. In addition, the visibility  
of the numbers on the LCD may decrease slightly. The LCD display  
will return to normal when the temperature increases to a normal  
range.  
Source  
Press the SRC button (7) to select a different mode of operation, as  
indicated on the display panel. Available modes include tuner (FM1, FM2,  
FM3, AM1, AM2), CD, auxiliary (AUX), SD, USB, SAT and iPod. CD, SD,  
USB, SAT and iPod mode only appear when the source is available.  
Bass  
To adjust Bass options, press the MENU button (22) to access the audio  
menu. Turn the rotary encoder until “BASS” appears in the display. Press  
the MENU button repeatedly (22) to access the following Bass settings:  
Audio Mute  
Press the mute button (2) to silence the audio volume. “Mute” appears on  
the display. Press mute again to restore volume to the previous setting.  
Bass Center Frequency  
Turn the rotary encoder clockwise to adjust the Bass Center Frequency  
to 60, 80, 100 or 200.  
Volume / Audio Control  
To increase the volume, turn the rotary encoder (22) clockwise. To decrease  
the volume, turn the rotary encoder counter-clockwise. When volume is  
adjusted, the volume level will be shown on the display panel as a number  
ranging from “0” (lowest) to “46” (highest).  
Bass  
Turn the rotary encoder clockwise to increase or counter-clockwise to  
decrease the Bass level from “-6” to “+6”. “0” represents a flat response.  
Bass Quality Factor  
Turn the rotary encoder to select one of the following Bass Quality  
Factor options: Q1, Q2, Q3, Q4. The following chart depicts the curve  
characteristics for each step:  
Press the MENU button (22) to access the audio menu. Turn the rotary  
encoder to step through the following audio functions: bass (BAS), mid-  
range (MID), treble (TRE), balance (BAL), fader (FAD), subwoofer (SUB)  
and volume (VOL). The unit automatically exits audio control mode after five  
seconds of inactivity.  
Bass Quality Factor Curve Characteristics  
7
MP6512i  
Mid-Range  
Balance  
To adjust Mid-Range options, press the MENU button (22) to access the  
audio menu. Turn the rotary encoder until “MID” appears in the display.  
Press the MENU button repeatedly to access the following Mid-Range  
settings:  
To adjust the balance from “12L” (full left) to ”12R” (full right), press the  
MENU button (22) to access the audio menu. Turn the rotary encoder until  
“BAL” appears in the display. Press the MENU button once to select “BAL”  
and then turn the rotary encoder to adjust the balance between the left and  
right speakers. “L = R” represents a center balance.  
Mid-Range Center Frequency  
Turn the rotary encoder clockwise to adjust the Mid-Range Center  
Frequency to 500, 1000, 1500 or 2500 (500Hz, 1KHz, 1.5KHz, 2.5KHz).  
Mid-Range  
Turn the rotary encoder clockwise to increase or counter-clockwise to  
decrease the Mid-Range level from “-6” to “+6”. “0” represents a flat  
response.  
Fader  
To adjust the fader from “12F” (full front) to “12R” (full rear), press the  
MENU button (22) to access the audio menu. Turn the rotary encoder until  
“FAD” appears in the display. Press the MENU button once to select “FAD”  
and then turn the rotary encoder to adjust the fader between the front and  
rear speakers. “F = R” represents a center fader level.  
Mid-Range Quality Factor  
Subwoofer  
Turn the rotary encoder to select one of the following Mid-Range  
Quality Factor options: Q1, Q2, Q3, Q4. The following chart depicts the  
curve characteristics for each step:  
To adjust Subwoofer options, press the MENU button (22) to access the  
audio menu. Turn the rotary encoder until “SUB” appears in the display.  
Press the MENU button to access the following Subwoofer settings:  
Middle Quality Factor Curve Characteristics  
Sub-woofer Low Pass Filter  
The sub-woofer LPF control is only applicable if the unit is connected to  
an optional sub-woofer speaker and a subwoofer level is selected. Turn  
the rotary encoder to select one of the following four Low Pass Filter  
options: Flat, 80Hz, 120Hz, 160Hz. (“Flat” turns the LPF off, allowing  
the sub-woofer to play full range.)  
Subwoofer Level  
The sub-woofer level control is only applicable if the unit is connected to  
an optional sub-woofer speaker. Turn the rotary encoder to turn the  
subwoofer ON/OFF or adjust the sub-woofer level from “00” to “12”.  
Equalizer Selector  
Treble  
The equalizer function applies preset sound effects to the unit’s audio  
output signal. Press EQ (18) to step through the following equalizer options:  
“ROCK”, “HIP-HOP”, “DANCE”, “RAVE”, “URBAN” and “EQ OFF”.  
To adjust Treble options, press the MENU button (22) to access the audio  
menu. Turn the rotary encoder until “TRE” appears in the display. Press the  
MENU button repeatedly to access the following Treble settings:  
When the equalizer function is activated, the most recently selected bass/  
treble levels cannot be adjusted. When the equalizer function is not active,  
the unit will return to the most recently selected bass and treble levels.  
Treble Center Frequency  
Turn the rotary encoder clockwise to adjust the Treble Center  
Frequency to 10k, 12k, 15k or 17k.  
Loudness On/Off  
Treble  
Turn the rotary encoder clockwise to increase or counter-clockwise to  
decrease the Treble level from “-6” to “+6”. “0” represents a flat  
response.  
When listening to music at low volume levels, this feature will boost the  
bass and treble ranges to compensate for the characteristics of human  
hearing. To change the loudness setting, press the LOUD button (5) to  
8
MP6512i  
select “OFF”, “LOW”, “MID” or “HIGH”. When activated, “LOUDNESS”  
appears on the display panel.  
Brightness Adjustment  
This option allows you to adjust the brightness of the LCD screen. Turn the  
rotary encoder to select a brightness level between “1” and “8”, with “8”  
being the brightest.  
Local/Distant Reception (LO/DX)  
When the Local function is on, only radio stations with a strong signal are  
played. To activate Local reception mode, press the LO/DX button (6).  
Clock Set  
1. Press and hold the DISP button until the clock blinks.  
2. Turn the rotary encoder (22) to the right the set the hour and to the left  
to set the minutes.  
NOTE: Distant mode is indicated by a triangle with circles above it.  
Menu Operation  
Reset Button  
Press and hold the MENU button (22) for more than two seconds to access  
the menu. Press the MENU button repeatedly to move through the following  
menu options: 12/24 HOUR, VOL LAST/VOL ADJ, BEEP ON/OFF, AREA  
SET, BRIGHT. The following procedures assume you have already  
accessed the menu.  
The RESET button (4) is located on the front panel below the rotary  
encoder. The reset circuitry protects the microprocessor circuitry. Since  
resetting the unit will erase the time and preset memories, it should only be  
activated upon initial installation after all wiring is complete, or if there is a  
malfunction of any of the switches on the unit. In these circumstances,  
pressing the RESET button will clear the system and return the unit to  
normal operation.  
12/24 Hour Time Format  
This option allows selection of a 12 hour or 24 hour clock format. “12  
HOUR” is the default setting. Turn the rotary encoder to change to the 24  
hour clock format.  
Programmable Turn-on Volume Level  
Press the MENU button (22) to select “VOL LAST” or “VOL ADJ”.  
VOL LAST: When the unit is turned on, the volume will resume at the  
level selected when last turned off.  
VOL ADJ: After selecting “VOL ADJ”, press the MENU button and then  
turn the rotary encoder (22) to select the desired level. When this option  
is selected, the unit will revert to the adjusted volume each time the unit  
is turned on.  
Beep Tone  
The beep tone feature allows the selection of an audible beep tone to be  
heard each time a button is pressed on the face of the radio. “BEEP ON” is  
the default setting.  
To turn the audible beep off:  
1. Press the MENU button (22) to select “BEEP ON”.  
2. Turn the rotary encoder to select the “BEEP OFF” option.  
Frequency Spacing (AREA SET)  
This option allows you to select the appropriate frequency spacing for your  
area. “U.S.A.” is the default setting. Turn the rotary encoder to select  
“EUROPE”, if needed.  
9
MP6512i  
TUNER OPERATION  
The MP6512i allows you to receive channels in U.S.A. or EUROPE mode.  
See “Frequency Spacing (AREA SET)” on page 9 to learn how to change  
the tuner options.  
Preview Scan  
Press the SCAN button (16) to scan all strong stations in the current band.  
The unit will stop at each station for five seconds before continuing to the  
next station. Press SCAN again to stop scanning and listen to the current  
station.  
Automatic Store (AS)  
MP6512i  
UNIVERSAL SERIAL BUS  
Select six strong stations and store them in the current band using the  
Automatic Store feature. To enable this feature, press the AS button (15).  
The radio will automatically “SEARCH” the band in use and enter strong  
stations into the preset memory positions for that band. After entering the  
stations into memory, the unit will automatically stop at each station for five  
seconds, allowing you to preview each selection. When using the Automatic  
Store feature, the new stations replace any stations already stored in preset  
memory for the selected band.  
/
SAT  
READY  
Program Type (PTY)  
PTY defines the type of program being broadcast, when applicable. Not all  
stations are broadcast with PTY information. You can use the PTY function  
to play stations broadcast in the following categories:  
Select a Band  
Press the BAND button (3) to change between three FM and two AM  
bands. Each band stores up to six preset stations.  
All PTY (any station with PTY information is searched)  
Traffic (the TA (Traffic Announcement) icon appears lit when a station  
broadcasting PTY Traffic Reports is selected)  
News  
Information  
Sports  
Talk  
Tuning  
Auto Seek Tuning  
Press the TUNE/TRACK >>| or |<< buttons (19) to move to the next/  
previous station automatically.  
Manual Tuning  
Rock  
Press and hold the TUNE/TRACK >>| or |<< buttons (19) for more than  
three seconds to enter manual tuning mode. Next, press the >>| or |<<  
buttons to move the radio frequency number up or down one step.  
Classic Rock  
Adult Hits  
Soft Rock  
Top 40  
Country  
Oldies  
Soft  
Nostalgia  
Jazz  
Classical  
Rhythm and Blues  
Soft Rhythm and Blues  
Preset Stations  
Up to six stations on each band can be stored as presets, which can then  
be instantly recalled by pressing the associated preset button (14). To store  
a station, turn the radio on and select the desired band and station. Press  
and hold the desired preset button (numbered one through six on the face  
of the radio) for more than two seconds. When stored, the preset number  
will appear in the display. The station is now stored and can be recalled by  
pressing the corresponding preset button. Repeat for the remaining five  
presets on the current band and for presets on the other four bands.  
10  
MP6512i  
Language  
Religious Music  
Religious Talk  
Personality  
Public  
College  
Weather  
Emergency Test  
Emergency  
To search for stations in a PTY category:  
1. Press the PTY button (17) to view the current PTY category.  
2. Use the TUNE/TRACK >>| or |<< buttons (19) to move through the list  
of available categories.  
3. After 2 seconds of inactivity, the radio will automatically scan and play  
the first station it locates in the selected category.  
NOTE: PTY is a new broadcast technology that may not be extensively  
available in your area.  
11  
MP6512i  
MP3/WMA OPERATION  
MP3 and WMA (Windows Media Audio) music files are digital audio files  
that are compressed to allow more files on a single CD. This unit can play  
MP3/WMA directly from files contained on a CD-R/RW, SD card or USB  
device using the buttons on the receiver (or optional remote control) as  
described below. Many types of software are available for converting audio  
files into MP3/WMA formats. Jensen recommends Nero or Roxio Easy CD  
Creator. Depending on the media type and recording method, some CD-R/  
RWs may be incompatible with this unit. This unit supports playback of  
MP3/WMA and CDDA (CDA), Mixed-Mode CDs and CD-Extra (including  
multi-session discs). Discs on which the session has not been closed will  
not play.  
MP3/WMA Encoder and CD Writer Settings  
Use the following settings when compressing audio data with the MP3  
encoder.  
Transfer bit rate: 8 - 320 kbps  
Sampling frequency: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz  
When using a CD writer to record MP3/WMA up to the maximum disc  
capacity, disable additional writing. To record an empty disc up to the  
maximum capacity at once, select the “disc at once” option.  
Entering ID3 Tag  
This unit supports ID3 tag versions 1.0  
and 1.1. For character codes, refer to  
the table to the right.  
Notes on MP3/WMA Play  
This unit can play MP3 (MPEG1, 2, 2.5 Audio Layer 3). However, the MP3  
recording media and accepted formats are limited. When writing MP3/  
WMA, pay attention to the following restrictions.  
Entering File and Folder Names  
Names using the code list characters  
are the only file names and folder  
names that can be entered and  
displayed. Using any other character will  
cause the file and folder names to be  
displayed incorrectly. The unit  
Acceptable Media  
The MP3/WMA recording media acceptable to this unit are SD card, USB  
hard drive or flash drive, CD-ROM, CD-R and CD-RW. When using CD-RW,  
use full format rather than quick format to prevent malfunction.  
Acceptable Medium Formats  
recognizes and plays only files with the MP3/WMA extension.  
The following formats are available for the media used in this unit. The  
maximum number of characters used for file name including the delimiter  
(".") and three-character extension are indicated in parentheses.  
NOTE: A file name entered with characters not on the code list may  
not play correctly.  
ISO 9660 Level 1 (11 characters)  
ISO 9660 Level 2 (31 characters)  
Joliet (31 characters)  
Writing Files into a Medium  
When a medium containing MP3/WMA data is loaded, the unit checks all  
data. If the medium contains a large number of folders or non-MP3/WMA  
files, MP3/WMA play will be delayed, it may take time for the unit to move to  
the next file, and searches may not be performed smoothly. Loading such a  
medium may produce loud noise and cause damage to the speakers. Do  
not attempt to play a medium containing a non-MP3/WMA file with the  
MP3/WMA extension or a medium containing non MP3/WMA files.  
Romeo (31 characters)  
Up to 200 characters can be displayed in the long file name format. For a  
list of available characters, see the instruction manual of the writing  
software and the section “Entering File and Folder Names” below. The  
media reproducible on this unit has the following limitations:  
Maximum number of nested folders: 8  
Maximum number of files per disc: 999  
Maximum number of folders per disc: 255  
Electronic Shock Protection  
10 seconds for CD-DA (CDA)  
>45 seconds for MP3 recorded at 44.1kHz, 128kbps  
>90 seconds for WMA recorded at 44.1kHz, 128kbps  
MP3/WMA files written in formats other than those listed above will not play  
successfully and their file or folder names will not display properly.  
13  
MP6512i  
Bit Rates  
Loading an SD Card  
Insert the SD card, label side down, into the SD slot on the front of the  
The unit supports bit rates from 32 - 320 kbps.  
MP3 Playing Order  
2
MediaLink . The unit will read the files on the card automatically. The “SD”  
card icon flashes when an SD card is being read.  
When selected for play, files and folders (Folder Search, File Search or  
Folder Select) are accessed in the order they were written by the CD writer.  
As a result, the order in which they are expected to be played may not  
match the order in which they are actually played. You may be able to set  
the order in which MP3/WMA files are to be played by writing them onto a  
medium such as a CD-R with their file names beginning with play sequence  
numbers such as "01" to "99". For example, a medium with the following  
folder/file hierarchy is subject to Folder Search, File Search or Folder Select  
as shown below.  
3.5mm  
Audio Only  
SD SLOT  
To remove the card, first press the SRC button (7) to switch to another  
mode and stop SD playback. Grasp the SD card and pull it straight out.  
Loading a USB Device  
2
1. Locate the USB jack on the MediaLink .  
3.5mm  
Audio Only  
USB JACK  
2. Insert the USB device into the USB jack. The unit will read the files on  
the USB device automatically. The “USB” icon flashes when a USB  
device is being read.  
To remove the USB device, press the SRC button (7) to switch to another  
mode and then remove the USB device from the USB jack.  
The MP6512i player will only recognize three folder levels and does not  
display folders containing only other folders. In the example above, the unit  
will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain  
any tracks directly. Folder 5 is not recognized at all since it is at the fourth  
level.  
Loading an MP3/WMA Disc  
After the disc is loaded, “CD Read” is displayed then “MAX” followed by the  
number of tracks is displayed. The unit will then display ID3 information  
pertaining to the last selected category (Folder, File, Track, Artist, Album, or  
Track number and Elapsed time).  
14  
MP6512i  
Track Select  
Press the TUNE/TRACK >>| or |<< buttons (19) for less than one second to  
advance to the next track on the source, or for more than one second to fast  
forward or fast reverse through the track. Playback begins when the button  
is released.  
MP6512i  
UNIVERSAL SERIAL BUS  
/
SAT  
READY  
Navigating Folders  
Press the folder UP (13) button (also the “5” button) to advance 10 songs.  
Press the folder DN (12) button (also the “6” button) to move 10 songs in  
reverse.  
Press and hold the folder UP button to skip to the next folder or the folder  
DN button to return to the previous folder.  
Intro Scan (INT)  
Pause  
Press the INT button (9) once to select “INT ON” and play the first 10  
seconds of each track.  
Press INT twice to select “INT FOLDER” and play the first 10 seconds  
of each track in the current folder.  
To turn off intro scan and play the current track, press the INT button  
until “INT OFF” appears on the display.  
Press the pause >/|| button (8) to suspend play. Press the pause >/|| button  
again to resume play.  
Accessing the ID3 Tag  
Press the DISP button (21) repeatedly during MP3/WMA play to access the  
ID3 information manually. The display will show any of the following  
information that is programmed on the source: Folder Name, File Name,  
Track Title, Artist Title, Album Name.  
Repeat (RPT)  
Press the RPT button (10) once to select “RPT ON” and repeatedly play  
the current file.  
Press RPT twice to select “RPT FOLD” and repeatedly play all files in  
the current folder.  
To turn off repeat play, press the RPT button until “RPT OFF” appears  
on the display.  
ICON  
DESCRIPTION  
FOLDER ICON  
FILE ICON  
TRACK ICON  
ARTIST ICON  
ALBUM ICON  
Random (RDM)  
Press the RDM button (11) once to select “RDM ON” and randomly play  
all files on the source.  
Press RDM twice to select “RDM FOLD” and randomly play all files in  
the current folder.  
To turn off random play, press the RDM button until “RDM OFF”  
appears on the display.  
15  
MP6512i  
MP3/WMA File or Folder Search  
The unit offers three methods of searching for files or folders on a disc.  
Direct Track Search  
1. Press the AS button (15) to activate the Track Search function. The  
LCD will display "TRK SCH".  
2. Press the MENU (Enter) button (22) to confirm.  
3. Turn the rotary encoder (22) to select the third digit.  
4. Press MENU to confirm and move to the second digit position.  
5. Turn the rotary encoder to select the second digit.  
6. Press MENU to confirm and move to the first digit position.  
7. Turn the rotary encoder to select the first digit.  
8. Press MENU to confirm and play the selected track.  
Navigation Search  
1. Press the AS button (15) twice. The LCD will display "NAVIGATE".  
2. Turn the rotary encoder (22) to navigate through all folders and sub-  
folders on the disc. The folder names will be displayed on the LCD.  
Press MENU for less than three seconds to access the sub-folders  
or files.  
Turn the rotary encoder to navigate, then press the select knob to  
confirm and begin file play.  
During navigation search, turn the rotary encoder to the left to move  
back to the last upper level of a folder.  
Direct Character Search  
1. Press the AS button (15) three times. The LCD will display "CHAR -  
SCH".  
2. Turn the rotary encoder (22) to choose a character, including letters A-  
Z, numbers 0-9 and blank spaces.  
3. Press the MENU button (22) to confirm entry and move to the next  
character space. After the last character is entered, press and hold the  
MENU button to access the file (if a match is found).  
4. If only two characters are entered and there is more then one file that  
begins with these characters, turn the rotary encoder to navigate the  
files or folders.  
5. Press MENU to confirm and play the file.  
16  
MP6512i  
SATELLITE RADIO OPERATION  
Selecting a Station  
®
Listeners can subscribe to XM Radio on the Web by visiting  
Press the TUNE/TRACK >>| or |<< button (19) to change to another  
station. Press and hold the TUNE/TRACK >>| or |<< button for more than  
one second to fast forward or fast reverse through the stations.  
have their Radio ID ready (see “Displaying the Identification (ID)  
Code”). Customers can receive a limited number of free-to-air  
channels without activation.  
Preset Stations  
Press the BAND button (3) to change between three SAT Radio bands.  
Each band stores up to six preset stations. You can store and recall a total  
of 18 preset stations.  
®
Listeners can subscribe to Sirius Radio on the Web by visiting  
have their Sirius ID ready (Sirius ID is located on the Satellite Radio  
Tuner, sold separately). Customers can listen to music samples by  
tuning to channel 184.  
Store a Station  
1. Select a band (if needed), then select a station.  
2. Hold a preset button (14) for three seconds. The preset number  
appears in the display.  
Accessing Satellite Radio Mode  
Recall a Station  
To switch to Satellite Radio mode, press SRC (7) until “- - SAT - -” appears  
on the display. This will not be displayed unless the unit is connected to an  
optional XM or Sirius receiver.  
1. Select a band (if needed).  
2. Press a preset button (14) to select the corresponding stored station.  
Direct Tuning Mode  
To enter a station directly, perform the following steps.  
1. Press the AS button (15) once. “Direct” appears on the screen.  
2. Press the MENU button (22) to display CH 001.  
3. Turn the rotary encoder to select the third digit of the desired channel  
(0-9).  
MP6512i  
UNIVERSAL SERIAL BUS  
/
SAT  
READY  
4. Press MENU (22) to enter the number and move to the second position.  
5. Turn the rotary encoder again to select the second digit of the desired  
channel (0 - 9).  
6. Press MENU to enter the second number and move to the first position.  
7. Turn the rotary encoder again to select the first digit of the channel you  
want to tune to (0 - 2).  
8. Press MENU to enter the final number and access the channel.  
NOTE: If the channel is unauthorized or invalid, “CH Unavail” appears  
on the LCD and the unit returns to the input interface after 2 seconds.  
Displaying the Identification (ID) Code  
Before you listen to Satellite Radio, you must subscribe to the service using  
your radio’s identification number. To display the radio ID, press the TUNE/  
TRACK |<< button (19) to access channel 000. The screen displays  
“RADIO ID” followed by the ID number.  
17  
MP6512i  
Category Tuning Mode  
To select stations in a specific category, perform the following steps.  
1. Press the AS button (15) twice. “CATEGORY” appears on the screen.  
2. Turn the rotary encoder to move through the available categories.  
3. Press the MENU button (22) to select the displayed category.  
4. Once a category is selected, turn the rotary encoder to select stations in  
the current category.  
5. Press MENU to select the displayed channel.  
Display Modes  
Press the DISP button (21) to change the mode to the following options in  
the order listed.  
Channel Name  
Genre (News, Sports, Hits, Kids, etc.)  
Artist name  
Song Name  
If the selected channel name, artist, or title exceeds eight characters, the  
display information will scroll upon selection.  
18  
MP6512i  
IPOD OPERATION  
Accessing iPod Mode  
iPod Category Search  
Press the SRC button (7) to change to iPod playback mode. iPod playback  
Press the 6 UP button (13) to enter the iPod menu. Turn the rotary encoder  
begins automatically when an iPod is connected.  
(22) to choose from the following categories:  
PLIST  
ARTIST  
ALBUM  
GENRE  
SONG  
MP6512i  
UNIVERSAL SERIAL BUS  
/
CMPOSER  
SAT  
READY  
Press the MENU button (22) to select an option. At any point, you can press  
the 6 UP button (13) to return to the previous option.  
Some search categories require multiple selections before accessing a  
track, depending on the file structure on your iPod and availability of items  
in a particular search category. For example, after selecting GENRE you  
may be required to select GENRE > ARTIST > ALBUM > SONG before  
accessing the desired track. Continue using the rotary encoder/MENU  
button until you locate the track you would like to play.  
Selecting a Track  
Press the TUNE/TRACK >>| or |<< button (19) to select a track.  
Press and hold the TUNE/TRACK >>| or |<< button (19) to fast forward or  
fast reverse through the track.  
Display Modes  
Press the DISP button (21) to change the ID3 display to the following  
options in the order listed.  
Track number and elapsed playing time  
Song name  
Artist name  
Album name  
If the selected album name, artist, or title exceeds eight characters, the  
display information will scroll upon selection.  
19  
MP6512i  
REMOTE CONTROL  
The remote control will allow you to control many functions of the MP6512i.  
Replacing the Battery  
When the range of operation of the card remote control becomes short or  
stops functioning, replace the battery with a new lithium battery. Be sure to  
observe the proper polarity, as indicated below.  
(CR 2025)  
MUTE  
SRC  
VOL  
SEL  
AS  
MENU  
CH/CAT  
PTY  
SCAN  
EQ  
BAND  
2
1
4
2
3
1
/
INT  
RPT  
RDM  
DISP  
5
6
Operating Range  
The remote control sensor (20) is located to the right of the SRC button.  
The remote control can operate within a distance of 3~5m.  
REMOTE SENSOR  
20  
MP6512i  
CARE AND MAINTENANCE  
CD Player  
Compact Discs  
The following guidelines will help you extend the life of your CD player:  
CD-R and CD-RW Capability  
1. When cleaning the vehicle interior, do not get water or cleaning fluids on  
the unit.  
2. The CD player will not operate properly in extreme hot/cold or under  
damp conditions. In case of such conditions, wait until the vehicle  
interior reaches a normal temperature or any condensation on the disc  
player lens has evaporated before using the player.  
3. Never insert anything other than round 5” CDs into the player.  
Attempting to insert CDs of other sizes (even with an adaptor) will  
cause damage not covered by the warranty.  
4. Always remove the CD when the player is not in use.  
5. The unit is designed with a vibration dampening CD mechanism to  
minimize interruption of disc play due to normal vibration in a moving  
vehicle. However, occasional sound skips may occur when driving on  
very rough roads. This will not scratch or damage the disc, and normal  
play will resume when the rough conditions cease.  
Depending on media type and method of "recording/burning", some CD-R/  
RWs may be incompatible with this unit. After "recording/burning", the  
session must be closed. Please refer to your software's recommended  
procedures for closing a disc/session. Review your recording software to  
familiarize yourself with the correct "recording/burning" procedures. We  
TM  
TM  
recommend using the latest versions of ROXIO or NERO burning  
software.  
In addition, this unit will only recognize the CDDA (Compact Disc Digital  
Audio), .MP3 and .WMA formats "recorded / burned" onto a CD-R/RW. This  
unit does not support .WAV, .OGG or other formats.  
CD Care and Handling  
Dirt, dust, scratches and warpage can cause skips in the playback and  
deterioration of sound quality. Please follow these guidelines to take care of  
your compact discs.  
1. Carefully wipe fingerprints, dust and dirt from the disc’s playing surface  
with a soft cloth. Wipe in a straight motion from the inside to the outside  
of the disc.  
2. Never use chemicals such as record sprays or household cleaners to  
clean CDs, as they can irreparably damage the disc’s surface.  
3. Discs should be kept in their storage cases when not in use.  
4. Do not expose discs to direct sunlight, high temperatures or high  
humidity for long periods.  
5. Do not stick paper, tape or CD labels on disc surfaces, as internal  
damage may occur.  
21  
MP6512i  
TROUBLESHOOTING  
Problem  
Cause  
Corrective Action  
Does not operate No power to yellow  
Check connection with test  
(display does not wire; no power to red light; check vehicle fuse with  
light)  
wire  
test light  
Inline fuse blown  
Inline fuse blown  
Replace fuse  
Check/replace fuse  
No power to unit  
No speakers oper- No speaker harness,  
Connect speaker harness;  
check speaker wires  
ate (display lights speakers not con-  
normally)  
nected  
Not all speakers  
operate  
Incorrect splices or  
connections  
Check all splices and connec-  
tions  
Speaker wires shorting Check splices; insulate all  
to chassis ground or to bare wires  
each other  
Blows fuses  
Power wire shorting to Make sure wire is not pinched  
ground  
Speaker wires shorting Make sure wire is not pinched  
to ground  
Incorrect fuse; fuse too Install fuse of correct rating  
small  
22  
MP6512i  
SPECIFICATIONS  
General  
CEA Power Ratings  
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 to 16VDC, negative ground  
Power Antenna (Blue) . . . . . . . . . . . . . . . . . . . . . . . . .500mA max, current limited protection  
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-20C ~ 65C  
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-amp, ATO type  
DIN chassis dimensions . . . . . . . . . . . . . . . . . . . . . 7" X 7" X 2" (178mm x 178mm x 50mm)  
*Specifications subject to change without notice.  
Power Output . . . . . . . . . . . . . . . .18 watts RMS X 4 channels into 4-ohms @ < 1% THD+N  
Signal to Noise Ratio. . . . . . . . . . . . . . . 70dBA below reference (reference: 1 watt, 4-ohms)  
Frequency Response . . . . .20Hz to 20kHz (-3dB), Auxiliary input used as source reference  
Reference Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14.4VDC  
CD Player  
Compatible Disc Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD-R / RW  
Compatible Media Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD-DA, MP3, WMA  
Signal to Noise Ratio @ 1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 90dB  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz to 20 kHz, -3dB  
Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 60dB @ 1 kHz  
D/A Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1bit/channel  
FM Tuner  
Tuning Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5MHz - 107.9MHz  
Mono Sensitivity (-30dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11dBf  
Quieting Sensitivity (-50dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15dBf  
Signal to Noise Ratio @ 1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58dB  
Stereo Separation @ 1 kHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >30dB  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Hz - 12kHz, -3dB  
AM Tuner  
Tuning Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 kHz - 1710 kHz  
Sensitivity (-20dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15uV  
Signal to Noise Ratio @ 1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50dB  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Hz - 2kHz, -3dB  
Auxiliary Input  
Input Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . .400mV RMS for 1 watt RMS into 4-ohms  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz to 20kHz, -3dB  
Input Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10k ohms  
23  
MP6512i  
24  
Limited Warranty  
DO NOT RETURN THIS PRODUCT TO THE STORE  
CD or Multimedia Radios/Headunits  
Audiovox Electronics Corporation (“the Company”) is committed to  
quality and customer service, and are pleased to offer you this  
Warranty. Please read it thoroughly and contact the Company at 1-800-  
323-4815 with any questions.  
Limitations  
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY  
IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,  
IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE  
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.  
Who is covered?  
The Company extends this warranty to the original retail purchaser of products  
purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or  
Canada. This warranty is not transferable or assignable. Proof of purchase is  
required in the form of an original sales receipt.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED  
WARRANTIES,  
INCLUDING  
ANY  
IMPLIED  
WARRANTY  
OF  
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS  
WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY  
HEREUNDER  
MERCHANTABILITY MUST BE BROUGHT WITHIN  
INCLUDING  
ANY  
IMPLIED  
WARRANTY  
OF  
What is covered?  
A
PERIOD OF 24  
The Company warrants that should this product or any part thereof, under normal  
use, be proven defective in material or workmanship within 12 months from the  
date of original purchase, such defect(s) will be repaired or replaced with a new or  
reconditioned product (at the Company's option) without charge for parts and  
repair labor.  
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE  
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS  
OR IMPLIED, WHATSOEVER. No person or representative is authorized to  
assume for the Company any liability other than expressed herein in connection  
with the sale of this product.  
What is not covered?  
This Warranty does not cover the following:  
Some states do not allow limitations on how long an implied warranty lasts or the  
exclusion or limitation of incidental or consequential damage so the above  
limitations or exclusions may not apply to you. This Warranty gives you specific  
legal rights and you may also have other rights which vary from state to state.  
x
Damage incurred during shipping or transporting the product to the  
Company or a service center  
x
x
x
x
x
Elimination of car static or motor noise  
Defects in cosmetic, decorative or non-operative structural parts  
Correction of antenna problems  
Costs incurred for installation, removal or reinstallation of the product  
Consequential damage to compact discs, USB devices, digital media  
cards, accessories or vehicle electrical systems  
Obtaining Warranty Service  
x
To obtain repair or replacement within the terms of this Warranty,  
call 1-800-323-4815 for the location of a warranty station serving  
your area.  
x
x
x
Damage caused by improper installation, mishandling, misuse, neglect,  
accident, blown fuse, battery leakage, theft or improper storage  
Products whose factory serial number/bar code label(s) or markings  
have been removed or defaced  
Damage resulting from moisture, humidity, excessive temperature,  
extreme environmental conditions or external natural causes  
x
You must prepay the initial shipping charges to the Company.  
The Company will pay the return shipping charges for all  
warranteed products returned to an address within the U.S.A.,  
Puerto Rico or Canada.  
Please package the product securely to avoid shipping damage.  
We recommend using a carrier that provides tracking service to  
prevent lost packages. Lost or damaged packages are not  
covered by this warranty.  
x
x
Please review the “Care and Maintenance” section of your Installation  
and Operation Manual for additional information regarding the proper  
use of your product.  
Provide a detailed description of the problem(s) for which you  
require service.  
Audiovox Electronics Corporation  
Hauppauge, NY 11788  
Technical Assistance: 1-800-323-4815  
© 2007 Audiovox  
Ver. 052107  
Printed in China  

Asus VH222 User Manual
Audiovox Rampage ACD85 User Manual
Blaupunkt BROOKLYN MP35 User Manual
Canon HF M400 User Manual
Canon WFT E6 User Manual
Cornelius Agitator Motor 569000207 User Manual
Fellowes C 380CMM User Manual
HP (Hewlett Packard) HP Prime Graphing Calculator HWPNW280AAABA User Manual
JVC 1004DTSMDTJEIN KD G152 User Manual
JVC GR D252 User Manual