Jabra BT2090 User Manual

Jabra BT2090  
User manual  
THANK YOU  
Thank you for purchasing the Jabra BT2090 Bluetooth® headset.  
We hope you enjoy it! This instruction manual will get you started  
and ready to make the most of your headset.  
ABOUT YOUR JABRA BT2090  
A. Answer/end button  
B.  
C. StatusDisplayTM  
With battery indicator and Bluetooth connection indicator  
D. Charging socket  
E. Volume up/down  
F. Ear hook  
D
B
A
E
C
F
JABRA BT2090  
2
 
WHAT YOUR HEADSET CAN DO  
Your Jabra BT2090 lets you do all this:  
-
-
-
-
-
-
-
-
-
-
Answer calls  
End calls  
See battery status  
See Bluetooth connection status  
Reject calls*  
Voice dialling*  
Last number redial*  
Mute  
Transfer calls  
Adjust volume  
-
-
-
-
-
-
-
-
Talk time 6 hours  
Standby time 8 days  
B
.1 with EDR and eSCO  
Weight 8 gram  
Operating range up to 10 meters (approximately 33 feet)  
Supported B  
Internal rechargeable battery charged by wall charger  
Always see your battery and connection status on the  
Jabra StatusDisplay™  
GETTING STARTED  
You should follow three steps before using your headset  
1
2
Charge your headset  
Activate Bluetooth on your mobile phone (refer to the  
manual for your mobile phone)  
3
Pair your headset to your mobile phone  
The Jabra BT2090 is easy to operate. The answer/end button on  
you press it.  
JABRA BT2090  
3
* Phone dependent  
 
Instruction  
Tap  
Duration of press  
Press  
Approx: 1 second  
Approx: 5 seconds  
Press and hold  
CHARGE YOUR HEADSET  
Make sure that your headset is fully charged for two hours before  
you start using it. Use the AC power supply to charge from a  
power socket. When the battery indicator has a solid red light,  
your headset is charging. When the headset is fully charged the  
.
Use only the charger provided in the box - do not use chargers  
from any other devices as this may damage your headset.  
Please note: T  
if your device is left uncharged for a long period. We therefore  
recommend that you recharge your device at least once a month.  
TURNING YOUR HEADSET ON AND OFF  
Slide the switch to the 'I' position to power on, and to the 'O' position  
to power oꢀ.  
PAIRING IT WITH YOUR PHONE  
Headsets are connected to phones using a procedure called  
‘pairing. By following a few simple steps, a phone can be paired  
with a headset in a matter of minutes.  
1
Put the headset in pairing mode  
-
When you turn on your Jabra BT  
9
headset will automatically start up on pairing mode – i.e. it is  
discoverable for your phone. When the headset is in pairing  
mode the Bluetooth status indication on the StatusDisplay™ is  
.
JABRA BT2090  
4
 
2
Set your Bluetooth phone to ‘discover’ the Jabra BT2090  
-
Follow your phone’s instruction guide. First make sure that  
Bluetooth is activated on your mobile phone. Then set your  
phone to discover new devices. This usually involves going  
to a ‘setup,connector ‘Bluetoothmenu on your phone and  
selecting the option to ‘discoveror ‘adda Bluetooth device.*  
3
9
-
BT2090.  
Your phone then asks if you want to pair with the headset.  
Accept by pressing ‘Yesor ‘OKon the phone. You may be asked  
. Then use 0000 (4 zeros). Your  
Bluetooth  
light to steady light.  
CONNECTIVITY  
DEVICES FOUND  
Jabra BT2090  
Jabra BT2090  
HANDSFREE  
MobilSurf  
Jabra BT2090  
added.  
The handsfree is  
now ready for use  
BLUETOOTH  
Infrared port  
Wap options  
Synchronization  
Networks  
Passkey:  
****  
SELECT  
SELECT  
OK  
SELECT  
Manual pairing mode  
pairing process was interrupted, you can manually set the headset  
to pairing mode.  
Make sure the headset is on. Press and hold the answer/end  
button for approximately 5 seconds until the Bluetooth icon turns  
. Then repeat steps 2 and 3 in  
the above pairing guide.  
CONNECTING WITH YOUR PHONE  
used together. When the headset and phone have been paired  
once, they will automatically connect when the headset is on and  
Bluetooth is activated on the phone. The headset can be used  
when it is “connectedto the phone. If the devices are paired, but  
do not immediately connect, tap the answer/end button. When  
your headset is connected the Bluetooth connection icon in the  
StatusDisplay™ will be constant on for 3 seconds.  
JABRA BT2090  
5
* Phone dependent  
 
WEAR IT HOW YOU LIKE IT  
The Jabra BT2090 can be worn on either ear with or without  
earhook. Simply remove the earhook if you prefer this wearing  
your preference.  
HOW TO  
Answer a call  
-
Tap (less than 1 sec) the answer/end button on your headset to  
answer a call.  
End a call  
-
Tap the answer/end button to end an active call.  
Reject a call*  
-
Press (approx 1 sec) the answer/end button when the phone  
rings to reject an incoming call. Depending on your phone  
settings, the person who called you will either be forwarded to  
your voice mail or will hear a busy signal.  
Make a call  
-
When you make a call from your mobile phone, the call will  
(subject to phone settings) automatically transfer to your  
headset. If your phone does not allow this feature, tap on the  
Jabra BT2090’s answer/end button to transfer the call to the  
headset. Press answer/end button and volume up button at the  
same time, you can transfer the call back to phone.  
Activate voice dialling*  
-
Press the answer/end button. For best results, record the voice  
dialling tag through your headset. Please consult your phone’s  
user manual for more information about using this feature.  
Redial last number*  
-
Double tap the answer/end button when the headset is  
connected to your phone.  
Adjust sound and volume*  
Tap the volume up or down to adjust the volume.  
-
JABRA BT2090  
6
* Phone dependent  
 
Mute/un-mute  
-
To mute, press both volume up and down at the same time.  
A low beep alert plays during a muted call.  
-
To un-mute, tap either of the volume buttons.  
Call waiting and placing a call on hold*  
-
This lets you put a call on hold during a conversation and  
answer a waiting call.  
-
Press the answer/end button once to put the active call on hold  
and answer the waiting call.  
-
-
Press the answer/end button to switch between the two calls.  
Tap the answer/end button to end the active conversation.  
HOW THE STATUSDISPLAY™ WORKS  
Bluetooth  
Indicator  
Indicates if your headset is connected to your  
phone  
- Solid light means headset is connected to your  
phone  
- Flashing light means headset is in ‘pairing  
modeand ready to be connected to a new  
phone  
Battery  
Indicator  
Indicates battery level and if headset is  
turned ON  
- Green light indicates that the headset has more  
than 10 minutes of talk time remaining  
- Red light indicates that the headset has less  
than 10 minutes of talk time remaining  
T
.
Get an instant status from the Jabra StatusDisplay™ by a tap on  
any button on the headset when you are not on a call.  
JABRA BT2090  
7
* Phone dependent  
 
TROUBLESHOOTING & FAQ  
I hear crackling noises  
-
Bluetooth is a radio technology, which means it is sensitive to  
objects between the headset and the connected device. It is  
designed for the headset and the connected device to be used  
within 33 feet (10 meters) of each other, with no major objects  
in the way (walls, etc.).  
I cannot hear anything in my headset  
-
-
-
Increase the volume in the headset.  
Ensure that the headset is paired to the device that you wish to use.  
Make sure your phone is connected to the headset by tapping  
the Answer/End button. See the Jabra StatusDisplay™.  
I am having pairing problems  
-
You may have deleted your headset pairing connection in your  
mobile phone.  
Follow the pairing instructions.  
I want to reset the headset  
It is possible to reset and test the headset by ’Press and holdthe  
volume down and answer/end buttons at the same time. In the  
StatusDisplayTM the battery icon and B  
simultaneously. In this mode, the pairing list is reset, and you can  
test if the headset works as you will be able to hear audio in the  
speaker from the microphone.  
T
. 10 seconds.  
The next time you power on, the headset will go into pairing  
BT2090 on.  
Will the Jabra BT2090 work with other Bluetooth equipment?  
-
The Jabra BT2090 is designed to work with Bluetooth mobile  
phones. It can also work with other Bluetooth devices that are  
compliant with Bluetooth version 1.1 or higher and support a  
.
I cannot use Reject call, call on hold, Redial or voice dialling  
These features are dependent on the ability of your phone to  
.
implemented reject call, call hold and voice dialling are optional  
features which are not supported by all devices. Please consult  
your device manual for details.  
JABRA BT2090  
8
 
NEED MORE HELP?  
1. Web:  
(for the latest support info and online User Manuals)  
2. E-mail:  
Deutsch  
English  
Español  
Français  
Italiano  
Nederlands  
Information: [email protected]  
Polska  
Scandinavian  
Россия  
3. Phone:  
Belgique/Belgie 00800 722 52272  
Danmark  
Deutschland  
Die Schweiz  
España  
702 52272  
0800 1826756  
00800 722 52272  
900 984572  
France  
0800 900325  
800 786532  
Italia  
Luxembourg  
Nederland  
Norge  
00800 722 52272  
0800 0223039  
800 61272  
Österreich  
Polska  
00800 722 52272  
0801 800 550  
00800 722 52272  
00800 722 52272  
020792522  
Portugal  
Suomi  
Sverige  
United Kingdom 0800 0327026  
Россия  
+7 495 660 71 51  
00800 722 52272  
International  
JABRA BT2090  
9
 
TAKING CARE OF YOUR HEADSET  
-
Always store the Jabra BT  
protected  
9
-
Avoid storage at extreme temperatures (above 45°C/113°F – in-  
cluding direct sunlight – or below -10°C/14°F). This can shorten  
. High temperatures may  
also degrade performance.  
-
Do not expose the Jabra BT2090 to rain or other liquids.  
WARNING!  
EXCESSIVE VOLUME LEVELS CAN CAUSE PERMANENT  
HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.  
Headsets are capable of delivering sounds at loud volumes and  
high pitched tones which under certain circumstances can result  
in permanent hearing loss damage. Avoid prolonged use of the  
headset at excessive sound pressure levels. Please read the safety  
guidelines below prior to using this headset.  
You can reduce the risk of hearing damage by following these  
safety guidelines  
1. Prior to using this product follow these steps  
-
Before putting on the headset, turn the volume control to its  
lowest level,  
-
-
Put the headset on, and then  
Slowly adjust the volume control to a comfortable level.  
2. During the use of this product  
-
Keep the volume at the lowest level possible and avoid using  
the headset in noisy environments where you may be inclined  
to turn up the volume;  
-
-
If increased volume is necessary, adjust the volume control slowly;  
If you experience discomfort or ringing in your ears, immediately  
discontinue using the headset and consult a physician.  
With continued use at high volume, your ears may become  
accustomed to the sound level, which may result in permanent  
damage to your hearing without any noticeable discomfort.  
JABRA BT2090  
10  
 
SAFETY INFORMATION!  
-
Use of a headset will impair your ability to hear other sounds.  
Use caution while using your headset when you are engaging  
in any activity that requires your full attention.  
-
-
If you have a pace maker or other electrical medical devices,  
you should consult your physician before using this device.  
This package contains small parts that may be hazardous to  
children and should be kept out of reach from children. The  
bags themselves or the many small parts they contain may  
cause choking if ingested.  
-
Never try to dismantle the product yourself. None of the  
components can be replaced or repaired by users. Only authorized  
dealers or service centers may open the product. If any parts  
of your product require replacement for any reason, including  
normal wear and tear or breakage, contact your dealer.  
-
-
Avoid exposing your product to rain, moisture or other liquids  
to protect against damage to the product or injury to you.  
Observe all signs and instructions that require an electrical  
device or R  
areas such as hospitals or aircrafts.  
Remember: Always drive safely, avoid distractions and follow  
local laws!  
Using the headset while operating a motor vehicle, motorcycle,  
watercraft or bicycle may be dangerous, and is illegal in some  
jurisdictions, just as use of this headset with both ears covered  
while driving is not permitted in certain jurisdictions. Check your  
local laws. Use caution while using your headset when you are  
engaging in any activity that requires your full attention. Also,  
do not take notes or read documents.  
BUILTꢀIN BATTERY CARE:  
-
Your device is powered by a rechargeable battery.  
-
The full performance of a new battery is achieved only after  
two or tree complete charge and discharge cycles.  
-
The battery can be charged and discharged hundreds of times,  
but will eventually wear out. Recharge your battery only with  
the provided approved chargers designated for this device.  
JABRA BT2090  
11  
 
-
Unplug the charger from the electrical plug and the device  
when not in use. Do not leave a fully charged battery connected  
to a charger, since overcharging may shorten its lifetime.  
-
-
If left unused, a fully charged battery will lose its charge over  
time.  
Leaving the device in hot or cold places, such as in a closed car  
in the summer and winter conditions, will reduce the capacity  
and lifetime of the battery.  
-
Always try to keep the battery between 15°C and 25°C (59°F and  
77°F). A device with a hot or cold battery may not work temporary,  
even when the battery is fully charged. Battery performance is  
particularly limited in temperatures well below freezing.  
-
-
.
Batteries may also explode if damaged.  
Battery warning!  
-
-
-
-
-
-
”CautionThe battery used in this device may present a risk of  
.
Do not attempt to open the product or replace the battery. It is  
built-in and not changeable.  
and the warranty will be terminated.  
Recharge your battery only with the provided approved  
chargers designated for this device.  
Dispose of batteries according to local regulations. Please  
recycle when possible. Do not dispose as household waste.  
Always store product out of the reach of children.  
CHARGER CARE:  
-
Do not attempt to charge your headset with anything other  
than the AC adaptor provided. The use of any other types  
may damage or destroy the headset and may invalidate any  
approval or warranty, and may be dangerous. For availability  
of approved enhancements, please check with your dealer.  
JABRA BT2090  
12  
 
Important: The headset cannot be used while charging  
Charger warning!  
-
-
-
When you disconnect the power cord or any enhancement,  
grasp and pull the plug, not the cord, never use a charger that  
is damaged.  
Do not attempt to disassemble the charger as it may expose  
you to dangerous electric shock. Incorrect reassembly can cause  
.
Avoid charging your headset in extremely high or low temperatures  
and do not use the charger outdoors or in damp areas.  
WARRANTY  
Limited One (1) -year Warranty  
GN Netcom A/S (“GN”) warrants this Product to be free from  
defects in materials and workmanship (subject to the terms set  
forth below) for a period of one (1) year from the date of purchase  
(“Warranty Period”). During the Warranty Period, GN will repair  
or replace (at GN’s discretion) this Product or any defective parts  
(“Warranty Service”). If repair or replacement is not commercially  
practicable or cannot be timely made, GN may choose to refund  
. Repair or  
replacement under the terms of this Warranty does not give right  
to any extension or a new beginning of the period of Warranty.  
Claims under the Warranty  
To obtain Warranty Service, please contact the GN dealer from  
further information about customer support. You will need to  
return this Product to the dealer or ship it to the dealer or to GN (if  
. You will bear  
the cost of shipping the product to GN. If the Product is covered  
by the warranty, GN will bear the cost of shipping product back  
to you after the completion of service under this warranty. Return  
shipping will be charged to you for products not covered by the  
warranty or requiring no warranty repair.  
JABRA BT2090  
13  
 
The Following information must be presented to obtain Warranty  
Service: (a) the product, and (b) proof of purchase, which clearly  
indicates the name and address of the seller, the date of purchase  
and the product type, which is evidence that this product is  
within the Warranty Period. Please further include (c) your return  
address. (d) daytime telephone number, and (e) reason for return.  
A
you understand that the product may consist of reconditioned  
equipment that contains used components, some of which have  
been reworked. The used components all live up to GN’s high  
quality standards and comply with the GN product performance  
. You understand that replaced parts  
or components will become the property of GN.  
Limitation of Warranty  
This Warranty is only valid for the original purchaser and will  
automatically terminate prior to expiration, if this Product is sold  
or otherwise transferred to another party. The Warranty provided  
by GN in this statement applies only to Products purchased for  
use, and not for resale. It does not apply to open box purchases,  
which are sold “as isand without any warranty.  
exempt from Warranty are limited-life consumable components  
subject to normal wear and tear, such as microphone windscreens,  
and other accessories. This Warranty is invalid if the factory-applied  
serial number, date code label, or product label has been altered  
or removed from this Product. This Warranty does not cover  
defects or damages that result from: (a) improper storage, misuse  
or abuse, accident or neglect, such as physical damage (cracks,  
scratches, etc.) to the surface of the Product resulting from misuse;  
(b) contact with water, extreme humidity, sand, dirt or the like or  
extreme heat; (c) use of the Product or accessories for commercial  
purposes or subjecting the Product or accessories to abnormal  
usage or conditions; or (d) other acts which are not the fault of GN.  
This Warranty does not cover damage due to improper operation,  
maintenance or installation, or attempted repair by anyone other  
than GN or a GN dealer which is authorized to do GN warranty  
work. Any unauthorized repairs will void this Warranty. This  
Warranty does not cover defects or damages that result from the  
peripheral equipment.  
JABRA BT2090  
14  
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS  
WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER.  
GNSHALL NOT BE LIABLE FOR ANY INCIDENTAL OR  
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR  
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT  
PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN  
LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHAT  
SO EVER, INCLUDING BUT NOT LIMITED TO THE WARRANTY OF  
MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.  
NOTE! T  
. You may  
have other rights which vary from location to location. Some  
jurisdictions do not allow the exclusion or limitation of incidental  
or consequential damages or implied warranties, so the above  
exclusions may not apply to you. T  
legal (statutory) rights under your applicable national or local laws.  
CERTIFICATION  
CE  
This product is CE marked according to the provisions of theR &TTE  
Directive (99/5/EC). Hereby, GN Netcom A/S, declares that this product  
is in compliance with the essential requirements and other relevant  
provisions of Directive 1999/5/EC. For further information please  
Bluetooth  
The Bluetooth® word mark and logos are owned by the Bluetooth  
SIG, Inc. and any use of such marks by GN Netcom A/S is under  
license. Other trademarks and trade names are those of their  
respective owners.  
Dispose of the product according to local standards and regulations.  
JABRA BT2090  
15  
 
GLOSSARY  
1
Bluetooth is a radio technology that connects devices, such  
as mobile phones and headsets, without wires or cords over  
a short distance (approx. 10 meters/33 feet). Bluetooth is safe  
to use. It is secure too, so once a connection has been made  
no-one can listen in and there is no interference from other  
Bluetooth devices either. Get more information at  
2
Bluetooth  
devices communicate with other devices. Bluetooth phones  
. In  
implement certain mandatory features within the phone’s  
software.  
3
4
5
Pairing creates a unique and encrypted link between two  
Bluetooth devices and lets them communicate with each other.  
Bluetooth devices will not work if the devices have not been  
paired.  
Passkey or PIN is a code that you enter on your Bluetooth  
enabled device (e.g. a mobile phone) to pair it with your Jabra  
BT2090. This makes your device and the Jabra BT2090 recog-  
nize each other and automatically work together.  
Standby mode is when the Jabra BT2090 is passively waiting  
for a call. When you ‘enda call on your mobile phone, the  
headset goes into standby mode.  
Dispose of the product according  
to local standards and regulations.  
JABRA BT2090  
16  
 
© 2009 GN Netcom A/S. All rights reserved. Jabra® is a registered  
trademark of GN Netcom A/S. All other trademarks included herein  
are the property of their respective owners. The Bluetooth® word  
mark and logos are owned by the Bluetooth SIG, Inc. and any use  
of such marks by GN Netcom A/S is under license. (Design and  
specifications subject to change without notice).  
MADE IN CHINA  
TYPE: OTE4  

ATN MK 6650 User Manual
Audiovox CD4720 User Manual
Canon Camcorder PC800S User Manual
Canon UC 100 User Manual
Insignia NS BRDVD4 CA User Manual
JBL Professional JBL Vertical Array Bracket Assembly MTC 23V User Manual
JL Audio C2 650cw User Manual
JVC GR AX777UM User Manual
JVC GR AXM23 User Manual
JVC GR SXM67ED User Manual