JVC GV LS2 User Manual

JVC CAM Control (for iPhone)  
User Guide  
English  
This is the instruction manual for the software (for iPhone) for  
Live Streaming Camera GV-LS2/GV-LS1 made by JVC KENWOOD  
Corporation.  
The models compatible with this app are iPhone 4, iPhone 4S or the  
4th generation iPod touch with iOS 5.1.1.  
Chapter 1 Quick Operation Guide  
1. Have You Completed the Camera Setup?  
Camera setup must be performed before JVC CAM Control is used.  
Be sure to check that the camera video and audio can be played from the Web browser  
before proceeding to the next step.  
For details on setting up the camera, refer to the instruction manual supplied with the camera.  
2. Installing from the App Store  
Open the App Store on the iPhone, and search for "JVC CAM Control".  
Select "JVC CAM Control" from the search results list, and touch [Install].  
3. Starting the App  
After the app installation is completed, the icon is displayed on the iPhone  
Home screen.  
Touch this icon to start JVC CAM Control.  
For details on changing the username and password, refer to the instruction  
manual supplied with the camera.  
4. Registering the Camera to Use  
The app starts.  
Touch the [CAMERA SELECT] button.  
[Caution]  
This app can only be used with a Wi-Fi connection. If  
an error is displayed after touching the button, check  
whether the iPhone is connected to a Wi-Fi network.  
The [CAMERA SELECT] screen is displayed, and the  
cameras in your network are listed.  
From the listed cameras, touch the camera you want to  
use.  
A login screen is displayed. Log in to the camera using  
the username and password that you set in the camera  
setup.  
[Caution]  
To prevent video from being leaked accidentally to third  
parties, be sure to change the username and password  
that are set when the camera is shipped.  
For details on changing the username and password,  
refer to the instruction manual supplied with the camera.  
1
Chapter 1 Quick Operation Guide  
5. Viewing Video  
After successfully logging in, the monitor display is  
displayed.  
In this screen, you can operate the camera and view video.  
(For details on the functions of each button, refer to  
"Chapter 3 Screen Descriptions".)  
6. Stopping Video Viewing  
Touch the [SETTING] button at the bottom of the monitor  
display, and then touch the [CAMERA SELECT] button. A  
disconnection confirmation screen is displayed. Touch [OK]  
to disconnect.  
7. Exiting the App  
Press the iPhone Home button to exit the app.  
2
Chapter 2 Advanced Operations  
Using the Internet to View Video from a Camera in a Remote Location  
You can view video from a camera in a remote location via  
the Internet.  
1. Assign a URL to the camera, for example by using the  
camera's DDNS function. For details on assigning a URL to  
the camera using a function such as the DDNS function,  
refer to the camera's instruction manual.  
2. Touch the [ADD CAMERA] button displayed in the bottom  
area of the [CAMERA SELECT] screen.  
3. Enter the camera URL and a camera name. Enter any name  
for the camera, selecting one that makes it easy for you to  
identify the camera. Be sure not to use the same name as  
another camera.  
4. The camera you entered in step 3 is displayed in the camera  
list. Touch this camera.  
5. Touch [START] to start logging in.  
6. After successfully logging in, you can operate the camera in  
the same way as the other cameras.  
[Caution]  
Viewing video may not be possible depending on your provider or network configuration.  
If you cannot view video properly, first check the settings carefully, and if the problem persists,  
contact your provider or network administrator.  
Video from the same camera cannot be viewed at the same time by multiple people.  
Camera video posted on the Internet can be viewed by anyone who knows the username and  
password. This means it is very risky to use a password that anyone can guess.  
Set a username and password that cannot be identified by other people. For details on  
changing the username and password, refer to the camera's instruction manual.  
3
Chapter 3 Screen Descriptions - [CAMERA SELECT] Screen  
[CAMERA SELECT] Screen  
"
#
$
[MAIN] button  
"
#
Displays the setting screen.  
Camera registration slots  
Register cameras in this location.  
Touch to select the slot in which to register the  
camera.  
[ADD CAMERA] button  
$
Use to add a camera manually.  
Use in situations such as when viewing a camera  
in a remote location via the Internet.  
4
Chapter 3 Screen Descriptions - Monitor Display  
[PAN/TILT]  
)
*
+ ,  
-
.
"
#
$
%
&
'
(
Video display  
Camera direction, zoom ratio  
Recording/stopped indicators  
"
)
You can change the camera direction by dragging  
your finger on the display.  
*
: Recording  
: Stopped  
Recording quality  
[ZOOM]  
#
+
,
SD card indicators  
[PAN/TILT]  
$ %  
: SD card inserted  
: SD card not inserted  
: Write lock applied  
Changes the direction of the camera.  
Touch  
to change the movement speed.  
Approximate time available for recording  
-
.
[PRESET]  
&
'
(
Power indicators  
[REC/FOCUS]  
[SETTING]  
: When battery power used  
: When AC power used  
5
Chapter 3 Screen Descriptions - Monitor Display  
[PRESET]  
#
"
[PRESET] buttons  
"
#
You can restore pan/tilt and zoom positions for  
the camera.  
Touch  
before touching a [PRESET] button to  
save the current pan/tilt and zoom positions of  
the camera.  
Return camera to center  
Returns the camera direction to the center.  
6
Chapter 3 Screen Descriptions - Monitor Display  
[REC/FOCUS]  
"
#
Start recording, stop recording  
"
Starts or stops video recording.  
To record a video, touch the button to unlock,  
and then start recording.  
To record, the camera stream setting must be  
[MotionJPEG] and an SD card must be inserted.  
[FOCUS]  
#
: Adjusts the focus automatically.  
: Use to adjust the focus manually.  
Adjust by touching the and  
buttons.  
7
Chapter 3 Screen Descriptions - Monitor Display  
[SETTING]  
"
#
$
%
[CAMERA SELECT]  
"
#
Displays the screen for canceling the camera  
currently being used and selecting another  
camera.  
[CAMERA RESOURCE]  
Displays the screen for configuring the video and  
audio settings.  
Use to configure camera settings such as the  
shutter speed and video brightness.  
$
%
[APP SETTINGS]  
Use to configure settings related to the app.  
8
Chapter 3 Screen Descriptions - [CAMERA RESOURCE SETTING] Screen  
Use to configure settings such as video and audio for the  
currently used camera.  
1. Touch  
.
2. Touch [CAMERA RESOURCE].  
3. Select the item to set by touching it.  
[STREAM SETTING] button  
"
Use to change the stream setting for the camera.  
Various restrictions apply depending on the stream  
setting of the camera, so use the setting appropriate for  
the time or situation.  
"
[MPEG-2 TS(HD) + MotionJPEG]  
Use to stream via the Internet in HD quality using  
"Camera Driver".  
Recording onto the camera cannot be performed in this  
mode.  
[MPEG-2 TS(SD) + MotionJPEG]  
Use to stream via the Internet in standard quality using  
"Camera Driver".  
Recording onto the camera cannot be performed in this  
mode.  
[MotionJPEG]  
Recording onto the camera can only be performed in  
this mode.  
[Caution]  
The stream setting cannot be configured when  
connected to the camera via the Internet.  
9
Chapter 3 Screen Descriptions - [CAMERA SETTINGS] Screen  
Use to configure settings for the currently used camera.  
1. Touch  
.
2. Touch [CAMERA SETTINGS].  
3. Select the item to set by touching it.  
Configure the settings for the camera.  
10  
Chapter 3 Screen Descriptions - [APP SETTINGS] Screen  
Use to configure settings related to the app.  
1. Touch  
.
2. Touch [APP SETTINGS].  
3. Select the item to set by touching it.  
"
#
$
%
[ZOOM SPEED]  
"
#
$
Sets the speed for zooming the camera.  
[BACKGROUND]  
You can change the background color of the app.  
&
[SPLASH]  
Sets whether to display the splash screen after starting the  
app.  
[GO TO MAIN AFTER CAMERA SELECT]  
%
&
Sets whether to display the monitor display after selecting  
a camera.  
When set to [OFF], the [CAMERA RESOURCE SETTING]  
screen is displayed after selecting a camera.  
[CAMERA RESOURCE SETTING]  
[VIDEO]: When registering the camera, set whether to use  
video.  
[AUDIO]: When registering the camera, set whether to use  
audio.  
[CONTROL]: When registering the camera, set whether to  
perform camera control.  
11  

Amphony 1520 User Manual
Canon ES75 User Manual
Canon PUB DIE 310B HG21 User Manual
Citizen Calculator SRP 145N User Manual
Cuisinart SMARTPOWER CLASSIC 0511000 User Manual
Curtis GPD358 User Manual
Eizo FlexScan LCD Monitor MX240W User Manual
Fusion Electronics Car Stereo System CA ML600 User Manual
Jensen VM9214 User Manual
JVC Everio GZ HM320U User Manual