JVC GR FXM65 User Manual

CONTENTS

GETTING STARTED

8–15

Power............................................. 8

Clock (Lithium) Battery Insertion/Removal ... 10

Date/Time Settings ........................... 11

Recording Mode Setting ...................... 12

Tape Length Setting ........................... 12

Loading/Unloading A Cassette .............. 13

Grip Adjustment ............................... 14

Viewfinder Adjustment ....................... 14

Shoulder Strap Attachment .................. 15

Tripod Mounting ............................... 15

COMPACT VHS

CAMCORDER

VIDEO RECORDING

16–19

GR-FXM65

Basic Recording ................................ 16

DIGITAL STILL CAMERA

(D.S.C.) SHOOTING

Basic Shooting ................................. 20

20–23

RECORDING

24–43

Basic Features ................................. 24

Advanced Features ............................ 29

VIDEO PLAYBACK

44–47

Basic Playback ................................. 44

Features ........................................ 45

Using The Cassette Adapter ................. 47

PLAYBACK

48–49

Basic Connections And Tape Dubbing ....... 48

D.S.C. PLAYBACK

50–57

Basic Playback ................................. 50

Connection...................................... 51

Advanced Features ............................ 52

USING THE REMOTE

CONTROL UNIT

Random Assemble Editing .................... 60

Insert Editing (VIDEO) ........................ 64

Insert Editing (Insert A Still Image

From The Built-in Memory Onto A Tape) .... 65

Audio Dubbing ................................. 66

TROUBLESHOOTING

INDEX

67–69

70–73

Controls, Connectors And Indicators ........ 70

Indications ...................................... 72

Terms ........................................... 74

INSTRUCTIONS

USER MAINTENANCE

CAUTIONS

SPECIFICATIONS

77–79

LYT0285-001A

EN3

Crossed Out Dust Bin Mark

NOTES:

●The rating plate (serial number plate) and safety

caution are on the bottom and/or the back of

the main unit.

Ⅲ The Crossed Out Dust Bin

Mark on the battery pack

indicates that the product

complies with Directives

91/157/EEC and 93/86/EEC.

Ⅲ Nickel-Cadmium (Ni-Cd)

battery pack must be

●The rating plate (serial number plate) of the AC

Power Adapter/Charger is on its bottom.

recycled or disposed of

properly.

This camcorder is designed to be used with PAL-

type colour television signals. It cannot be used

for playback with a television of a different

standard. However, live recording and LCD

monitor/ viewfinder playback are possible

anywhere. Use the BN-V12U/V20U battery

packs and, to recharge them, the provided multi-

voltage AC Power Adapter/Charger. (An

appropriate conversion adapter may be

necessary to accommodate different designs of

AC outlets in different countries.)

This unit is produced to comply with Standard

IEC Publ. 65.

SOME DO’S AND DON’TS ON THE SAFE

USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any

electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

read the operating instructions before you attempt to use the equipment.

ensure that all electrical connections (including the mains plug, extension leads and interconnections

between pieces of equipment) are properly made and in accordance with the manufacturer’s

instructions. Switch off and withdraw the mains plug when making or changing connections.

consult your dealer if you are ever in doubt about the installation, operation or safety of your

equipment.

be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is

damaged in any way — switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for

unattended operation or has a standby mode. Switch off using the switch on the equipment and make

sure that your family knows how to do this. Special arrangements may need to be made for infirm or

handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of

road safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating

will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the

manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

— NEVER let anyone especially children push anything into holes, slots or any other opening in the case —

this could result in a fatal electrical shock;

— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

MAJOR FEATURES

REMEMBER

Digital Still Camera Built-in

(PC communication capable)

(੬ pg. 20 – 23, 50 – 57)

Menu Adjustment

(੬ pg. 34, 35, 36)

Integrated Auto Light

(੬ pg. 28)

Programme AE with Special

Effects (੬ pg. 30, 31)

Picture Stabilizer (੬ pg. 27)

Ⅲ Electronic Fog Filter

Ⅲ ND Effect

Ⅲ Sepia

Ⅲ Twilight

Ⅲ Sports

Ⅲ Nega/Posi

Ⅲ 1/2000 sec. High Speed Shutter

Digital Hyper Zoom

(੬ pg. 26)

Zoom in

LCD Colour Monitor

(੬ pg. 18)

Zoom out

Ⅲ This camcorder is designed exclusively for the

VHS-C video cassette. Only cassettes marked

VHS-C can be used with this unit.

Ⅲ HQ VHS is compatible with existing VHS

equipment.

EN5

PROVIDED ACCESSORIES

•AC Power Adapter/

Charger AA-V15EK

•Cassette Adapter C-P7U

•Battery Pack BN-V12U

•Cable Adapter

•Remote Control

Unit RM-V709U

•Shoulder Strap

•Lithium Battery CR2025 x 2

(for clock operation and

remote control unit)

•Editing cable

•DC Cord

•CD-ROM including

two software

programmes

•PC Connection

Cable x 1

(for Windows^®PC)

QUICK OPERATION GUIDE (VIDEO)

The image you shoot is recorded onto a video tape.

SUPPLY POWER

INSERTING A VIDEO

CASSETTE

Hook on.

Push in.

4 _{PUSH Button}

BATTERY RELEASE

EJECT Switch

Using the battery pack

1 Open the LCD monitor to an angle of over 60

degrees.

Hook its end to the camcorder ( ) and push the

battery pack in until it locks in place ( ).

(Charging procedure, ੬ pg. 8)

2 Slide EJECT to open the cassette holder.

3 Insert a video cassette.

To remove the battery pack

Slide BATTERY RELEASE and pull out the battery

pack.

4 Press PUSH to close the cassette holder.

(For more details, ੬ pg. 13)

PLAYBACK

SHOOTING

REW (2) Button

LENS COVER

Open/Close Ring

Set to “AUTO”

or “PRO.”

4 ^P₍^LAY/PAUSE

4/6) Button

Set to “PLAY”

Recording Start/Stop Button

STOP (5) Button

Set to “VIDEO”

1 Set the System Select Switch to “VIDEO”.

2 Set the Power Switch to “PLAY”.

3 Press REW (2).

— The tape will automatically stop at the

beginning of the tape.

4 Press PLAY/PAUSE (4/6).

— Playback starts and the playback picture

appears.

•To stop playback, press STOP (5).

(For more details, ੬ pg. 44.)

•The viewfinder switches off automatically to

save power when the LCD monitor is opened

at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is

opened/closed at approx. 60 degrees.

1 Turn the LENS COVER Open/Close Ring to

open the lens cover.

2 Set the System Select Switch to “VIDEO”.

3 Set the Power Switch to “AUTO” or “PRO.”.

— The power lamp will light and an image

will appear.

4 Press the Recording Start/Stop Button.

— Recording starts.

•To stop recording temporarily, momentarily

press the Recording Start/Stop Button once

again.

(For more details, ੬ pgs. 16 – 19)

•The viewfinder switches off automatically to

save power when the LCD monitor is opened

at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is

opened/closed at approx. 60 degrees.

Or simply play back the tape on a VHS VCR

using the Cassette Adapter. ੬ pg. 47

QUICK OPERATION GUIDE (D.S.C.)

A still image you shoot is stored in the camcorder's built-in memory.

EN7

SHOOTING

SUPPLY POWER

Hook on.

Push in.

SNAPSHOT Button

LENS COVER

Open/Close Ring

Set to “AUTO”

or “PRO.”

System Select Switch

Set to “D.S.C.”

BATTERY RELEASE

Using the battery pack

Hook its end to the camcorder ( ) and push the

battery pack in until it locks in place ( ).

(Charging procedure, ੬ pg. 8)

To remove the battery pack

Slide BATTERY RELEASE and pull out the battery

pack.

1 Turn the LENS COVER Open/Close Ring to

open the lens cover.

2 Set the System Select Switch to “D.S.C.”.

3 Set the Power Switch to “AUTO” or “PRO.”.

— The power lamp will light and an image

will appear.

4 Press the SNAPSHOT Button.

— A still image is shot and is stored in the

camcorder’s memory.

PLAYBACK

(For more details, ੬ pgs. 20 – 23)

•The viewfinder switches off automatically to

save power when the LCD monitor is opened

at an angle of over 60 degrees.

REW (2/PAGE –) Button,

FF (3/PAGE +) Button

•The LCD monitor turns on/off when it is

opened/closed at approx. 60 degrees.

Set to “PLAY”

System Select Switch

Set to “D.S.C.”

1 Set the System Select Switch to “D.S.C.”.

2 Set the Power Switch to “PLAY”.

— A still image stored in memory appears.

3 Press REW (2/PAGE –) or FF (3/PAGE +) to

select the still image you want to view.

(For more details, ੬ pg. 50.)

•The viewfinder switches off automatically to

save power when the LCD monitor is opened

at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is

opened/closed at approx. 60 degrees.

GETTING STARTED

Marks

Power

This camcorder’s 3-way power supply system lets you choose

the most appropriate source of power.

To AC outlet

CHARGE indicator

NOTES:

● No function is available without power supply.

● Use only the specified power supply.

● Do not use provided power supply units with other

equipment.

CHARGING THE BATTERY PACK

REFRESH switch

SUPPLY POWER

1 _{Connect the charger’s AC power cord to a wall outlet.}

REFRESH indicator

ATTACH BATTERY PACK

2 _{Align the marks and slide the battery pack in the}

REFRESH

direction of the arrow until it locks in place.

The AC Power Adapter/Charger features a

REFRESH function that allows you to fully

discharge the battery pack before recharg-

ing.

Perform the REFRESH function after no less

than 5 chargings.

•The CHARGE indicator begins blinking to indicate

charging has started.

DETACH BATTERY PACK

3 _{When the CHARGE indicator stops blinking but stays lit,}

charging is finished. Slide the battery pack opposite the

direction of the arrow.

To discharge the battery . . .

.... attach the battery pack to the adapter as

shown in the above illustration. Then

push REFRESH. The REFRESH indicator

lights when discharging starts, and goes

out when discharging is complete.

Battery pack

BN-V12U

BN-V20U

Charging time

approx. 1 hr. 10 min.

approx. 1 hr. 50 min

Discharging time

approx. 3 hrs. 30 min.

approx. 6 hrs. 40 min.

USING THE BATTERY PACK

Hook on.

ATTACH BATTERY PACK

1 _{Hook its end to the camcorder (}

) and push the battery

Push in.

pack in until it locks in place (

) .

DETACH BATTERY PACK

2 _{Slide BATTERY RELEASE and pull out the battery pack.}

Approximate recording time (unit: min.)

LCD

Battery pack monitor on/

monitor off/

monitor on/

Viewfinder off Viewfinder on Viewfinder on

BN-V12U

BN-V20U

50 (35)

85 (55)

55 (35)

90 (55)

45 (30)

75 (50)

BATTERY RELEASE

(

) : when the video light is on.

INFORMATION:

ATTENTION:

VU-V856KIT is a set composed of the BN-V856U battery pack

and AA-V80EK AC Power Adapter/Charger.

Before detaching the power source,

make sure that the camcorder’s power

is turned off. Failure to do so can result

in a camcorder malfunction.

The BN-V856U battery pack provides approx. 7 hours of

recording time when the viewfinder is on and the LCD

monitor and the video light are off. Also read thoroughly the

VU-V856KIT’s instruction manuals.

It is impossible to charge the BN-V856U battery pack using

the provided AC Power Adapter/Charger. Use the optional

AA-V80EK AC Power Adapter/Charger.

EN9

Charge Marker

A charge marker is provided on the battery pack to

help you remember whether it has been charged or

not. Two colours are provided (red and black)—you

choose which one means charged and which means

discharged.

Charge marker

NOTES:

● The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the

frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.

● Charging times noted on page 8 are for a fully discharged battery pack, and discharging times are for a fully

charged battery pack.

● Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

● Remember to set the charge marker after charging a battery pack or after detaching a discharged one from

your camcorder.

● Perform the REFRESH function after no less than 5 chargings.

● While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to

discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does

not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/

Charger to store it.

● High temperatures can damage the battery pack, so use only where good ventilation is available. Do not

allow it to discharge in a container, such as a bag.

● If you stop recharging or discharging part way through, make sure to remove the battery pack before

unplugging the adapter’s AC cord.

● Remove the battery pack from the adapter immediately after discharging.

● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

● Make sure you unplug the DC cord before charging or discharging the battery pack.

● The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been

stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The

CHARGE indicator should blink during recharging. If it doesn’t, contact your nearest JVC dealer.

USING AC POWER

To AC outlet

To DC IN jack

Use the AC Power Adapter/Charger (connect as

shown in the illustration.

DC OUT

terminal

NOTES:

● The provided AC Power Adapter/Charger features

automatic voltage selection in the AC range from

110 V to 240 V.

● When using the DC cord, make sure you connect

the end of the cord with the core filter to the

camcorder. The core filter reduces interference.

AC Power

Adapter/Charger

AA-V15EK

DC Cord

USING A CAR BATTERY

Use the optional Car Battery Charger/Adapter

(connect as shown in the illustration.

To car’s cigarette

lighter socket

NOTES:

● When using the car battery, leave the engine

idling.

● The optional Car Battery Charger/Adapter (BH-V3E)

can also be used to charge the battery pack (except

BN-V20U/V856U).

● When using the optional Car Battery Charger/

Adapter or Car Battery Cord (AP-V7U), refer to the

respective instruction booklet.

Car Battery

Charger/Adapter

BH-V3E (optional)

GETTING STARTED (cont.)

Slot

Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to

perform date/time settings.

SWITCH OFF POWER

1 _{Switch off the unit’s power and remove the power}

supply unit (battery pack, AC Power Adapter/Battery

Charger, etc.).

REMOVE BATTERY HOLDER

2 _{Pull out the battery holder.}

Battery holder

INSERT BATTERY IN HOLDER

3 _{Insert the battery in the holder, and be sure to have}

the “+” mark visible.

RE-INSERT HOLDER

4 _{Slide the holder back into the slot until you hear a}

click.

NOTES:

● See “SAFETY PRECAUTIONS” (੬ pg. 2) for information

on safe handling of lithium batteries.

● To avoid losing the battery and/or battery holder, place

the camcorder with the grip side up as shown in the

illustration when inserting/removing the battery.

EN11

Date/Time Settings

SELECT OPERATION SYSTEM AND

1 _MODE

System

Select Switch

Set the System Select Switch to “VIDEO” or “D.S.C.” ,

and set the Power Switch to “PRO.”.

•The power lamp comes on.

ACCESS MENU SCREEN

2 _{Press MENU.}

SELECT FUNCTION

MENU Button

3 _{Rotate the Select Dial to move the highlight bar to}

“DATE/TIME”, then press it. The DATE/TIME Menu

appears.

Power lamp

•If you decide you want to return the date and time

to the previous settings, rotate the Select Dial to

move the highlight bar to “EXIT” and press it, then

go to step 7.

•If you want to set only the time without changing

the date, go to step 5.

Select Dial

Power Switch

SET DATE

4 _{Rotate the Select Dial to move the highlight bar to the}

Display

item you want to set and then press it. When the

setting begins blinking, rotate the Select Dial until the

correct setting appears and then press it. The setting

stops blinking.

Menu Screen

M.W.B.

AUTO

D . ZOOM

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

PICTURE

FINE

FULL

•Repeat this procedure until you’re satisfied with the

Date settings (“YEAR”, “MONTH” and “DAY”).

SNAPSHOT

4RETURN

SET TIME

5 _{Rotate the Select Dial to move the highlight bar to}

DATE TIME

DATE/TIME Menu

24-hour indication

“TIME” and then press it. When the hour setting

begins blinking, rotate the Select Dial until the correct

setting appears and then press it. When the hour

setting stops blinking and the minute setting begins

blinking, rotate the Select Dial until the correct setting

appears and then press it. The minute setting stops

blinking.

YEAR

1999

MONTH

DAY

TIME

22 : 50

EXIT

START CLOCK OPERATION

6 _{When none of these settings (“YEAR”, “MONTH”,}

M.W.B.

AUTO

D . ZOOM

“DAY”, “TIME”) blinks, rotate the Select Dial to move

the highlight bar to “EXIT”, and press it. The Menu

Screen reappears with the highlight bar on

“RETURN”.

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

PICTURE

FINE

FULL

SNAPSHOT

4RETURN

CLOSE MENU SCREEN

7 _{Press the Select Dial.}

NOTE:

To display the date and time in the camcorder’s display

and on a connected TV, see “Date/Time Insert”

(੬ pg. 32).

GETTING STARTED (cont.)

Recording Mode Setting

Set depending on your preference.

SET RECORDING MODE

System

Select Switch

1 _{First set the System Select Switch to “VIDEO”, then}

set the Power Switch to “AUTO” or “PRO.”. Press SP/

LP for more than 1 second. “SP” (Standard Play)

provides higher picture and sound quality and is

better for dubbing, while “LP” (Long Play) is more

economical, providing twice the recording time.

NOTE:

MENU Button

SP/LP Recording

If the recording mode is switched during recording, the

playback picture will be blurred at the switching point.

Mode Button

Tape Length Setting

Set the tape length according to the length of the tape

used.

Select Dial

Viewfinder

Power Switch

ACCESS MENU SCREEN

1 _{First set the System Select Switch to “VIDEO”, then}

Tape length indicator

T45

set the Power Switch to “PRO.”. Press MENU.

SELECT FUNCTION

Recording mode

indicator

2 _{Rotate the Select Dial to move the highlight bar to}

“TAPE LENGTH”, then press it. The TAPE LENGTH

Setting Menu appears.

SET TAPE LENGTH

Display

3 _{Rotate the Select Dial to move the highlight bar to the}

correct setting. T30=30 minutes of recording time,

T45=45 minutes, and T60=60 minutes (in SP).

Menu Screen

M.W.B.

AUTO

D . ZOOM

TELE MACRO OFF

DATE TIME

•If you decide you want to return the tape length to

the previous setting, rotate the Select Dial to move

the highlight bar to “EXIT”.

TAPE LENGTH T45

PICTURE

FINE

FULL

SNAPSHOT

RETURN

CLOSE MENU SCREEN

4 _{Press the Select Dial. The Menu Screen reappears}

TAPE LENGTH

with the highlight bar on “RETURN”. Press the Select

Dial again to close the Menu Screen.

TAPE LENGTH

Setting Menu

T30

T45

T60

NOTE:

The tape remaining time (੬ pg. 17) displayed in the

viewfinder is correct only if the correct tape length has

been selected.

EXIT

M.W.B.

AUTO

D . ZOOM

TELE MACRO OFF

DATE TIME

TAPE LENGTH T60

PICTURE

FINE

FULL

SNAPSHOT

4RETURN

EN13

Cassette holder

Loading/Unloading A Cassette

OPEN LCD MONITOR

1 _{Open the LCD monitor to an angle of over 60}

degrees.

OPEN CASSETTE HOLDER

2 _{Slide EJECT until the holder opens. Do not use force}

to open.

INSERT/REMOVE CASSETTE

3 _{Make sure the label is facing outward.}

PUSH Button

EJECT Switch

CLOSE CASSETTE HOLDER

4 _{Press PUSH and make sure the holder is closed and}

locked.

CLOSE LCD MONITOR

5 _{First make sure the holder is closed. Then close the}

LCD monitor.

Turn to take

up slack.

NOTES:

● Closing the LCD monitor while the cassette holder is still

open may cause damage to the LCD monitor.

● The cassette holder can’t be opened unless a power

supply is attached.

Erase Protection

Gear

● Make sure that the tape is not slack when loading the

cassette. If there is any slack, turn the gear on the

cassette in the direction of the arrow to take up the

slack.

● Make sure the Erase Protection tab is in the position that

allows recording. If not, slide the tab. Some cassettes

have removable tabs. If the tab has been removed, cover

the hole with adhesive tape.

● The cassette holder cannot be opened while the

camcorder is in the record mode.

GETTING STARTED (cont.)

Grip Adjustment

Power Zoom Lever

EXPAND LOOP

1 _{Separate the Velcro strip.}

INSERT HAND

2 _{Pass your right hand through the loop and grasp the}

grip.

ADJUST STRAP LENGTH

3 _{Adjust so that your thumb and fingers can easily}

operate the Recording Start/Stop Button and Power

Zoom Lever. Refasten the Velcro strip.

Recording Start/Stop Button

Viewfinder Adjustment

SELECT OPERATION MODE

1 _{Set the Power Switch to “CAMERA” (“AUTO” or}

“PRO.”).

POSITION VIEWFINDER

180°

2 _{Adjust the viewfinder manually for best viewability}

(see illustration on left).

ADJUST DIOPTRE

3 _{Turn the Dioptre Adjustment Control until the}

indications in the viewfinder are clearly focused.

Set “POWER” to

“CAMERA”

(“AUTO” or “PRO.”)

PAUSE

EN15

Shoulder Strap Attachment

ATTACH STRAP

1 _{Following the illustration on left, thread the strap}

through the top of the eyelet 1, then fold it back and

thread it through the buckle 2. Repeat the procedure

to attach the other end of the strap to the other eyelet

3, making sure the strap is not twisted.

ADJUST LENGTH

2 _{Adjust as shown in the illustration on left 4.}

Tripod Mounting

ALIGN AND TIGHTEN

1 _{Align the screw and camera direction stud on the}

tripod with the camera’s mounting socket and stud

hole. Then tighten the screw.

CAUTION:

When using a tripod, be sure to open and extend

its legs fully to stabilize the camcorder. To

prevent damage to the unit caused by falling

over, do not use a small-sized tripod.

VIDEO RECORDING Basic Recording

System Select Switch

LENS COVER

Open/Close Ring

NOTE:

You should already have performed the procedures listed

below. If not, do so before continuing.

● Power (੬ pg. 8)

● Recording Mode Setting (੬ pg. 12)

● Tape Length Setting (੬ pg. 12)

● Grip Adjustment (੬ pg. 14)

● Viewfinder Adjustment (੬ pg. 14)

LOAD A CASSETTE

1 _{First open the LCD monitor to an angle of over 60}

degrees.

Slide EJECT to open the cassette holder, then insert

the cassette with the label facing out. Press PUSH to

ensure the holder is closed and locked.

Power Switch

Recording Start/Stop Button

EJECT Switch

Shooting While Watching The Viewfinder

Power lamp

ENTER RECORD-STANDBY MODE

2 _{Make sure the LCD monitor is closed and locked.}

Turn the LENS COVER Open/Close Ring to open the

lens cover. Set the System Select Switch to “VIDEO”,

then set the Power Switch to “CAMERA” (“AUTO” or

“PRO.”).

•The power lamp lights and the camcorder enters the

Record-Standby mode.

Tally lamp

(lights while recording is in progress)

•The scene you are aimed at appears on the

viewfinder screen, with the word “PAUSE”

superimposed upon it.

START SHOOTING

3 _{Press the Recording Start/Stop Button.}

•“

” appears in the viewfinder while recording is

in progress.

Power Switch Position

According to the Power Switch position you have selected, the following functions are available:

AUTO

(Full Auto mode):

PRO.

(PRO. mode):

POWER OFF:

Allows you to record using

Allows you to set various

recording functions using the

menus. If you want more creative

capabilities than full auto

recording, try this mode.

Allows you to switch off the

camcorder.

NO special effects or manual

adjustments. Suitable for

standard recording.

EN17

Tape remaining time indicator

STOP RECORDING

4 _{Press the Recording Start/Stop Button again to stop}

25MIN

MIN

(Now calculating)

recording.

•The camcorder re-enters the Record-Standby mode.

120MIN

119MIN

NOTES:

● When the Power Switch is set to “CAMERA” and the

LCD monitor is opened at an angle of 60 degrees or

more, the LCD monitor switches on and the viewfinder

switches off automatically to save power.

3MIN

● The cassette holder cannot be opened unless a power

supply is attached.

2MIN

(Blinking)

● There may be a delay after you slide EJECT until the

holder opens. Do not use force.

● The tape remaining time is only displayed in the

viewfinder as shown.

1MIN

(Blinking)

● The remaining time indicated in the viewfinder is

approximate.

● The time required to calculate the remaining tape

length, and the accuracy of the calculation, may vary

according to the type of tape used.

0MIN

(Blinking)

● The tape remaining time indicator is correct only if the

correct tape length has been selected (੬ pg. 12).

● “TAPE END” appears when the tape reaches its end, and

the power goes off automatically if left in this condition

for 5 minutes. “TAPE END” also appears when a cassette

whose tape is already at its end is loaded.

Recording Start/Stop Button

● If the Record–Standby mode continues for 5 minutes

without performing Zoom or any other operations, the

camcorder’s power shuts off automatically. Set the

Power Switch to “POWER OFF”, and then back to

“CAMERA” to turn the camcorder on again.

● If the Recording Start/Stop button is pressed after the

Record-Standby mode has continued for over

5 minutes, recording may not start immediately.

● If you are recording on a cassette from the middle (such

as when a tape is removed and re-inserted during

recording), use the Retake function (੬ pg. 27) to find

the end of the last recording so you don’t erase any of it.

● The LENS COVER warning blinks for about 5 seconds

when the camcorder is turned on with the cover closed.

● While shooting, sound is not heard from the speaker.

● To turn the tally lamp off during recording, refer to pgs.

34 and 36.

DISPLAY Button

LCD Monitor/Viewfinder Indications

Press DISPLAY to make the following indications appear/

disappear from the camcorder’s display: cassette warning,

tape remaining time, battery pack remaining power

indicator and tape length indicator (੬ pg. 64, 65).

PRESS DISPLAY BUTTON

1 _{To turn off the indications, press DISPLAY for more}

than 1 second.

Press again for more than 1 second to make the

indications reappear.

NOTE:

Even if the indications are off, the tape remaining time

appears blinking when the tape is near its end, and the

battery pack remaining power indicator appears blinking

when the power is almost gone.

VIDEO RECORDING Basic Recording (cont.)

Shooting While Watching The LCD Monitor

Before the following steps, perform step 1 (੬ pg. 16).

90°

180°

ENTER RECORD–STANDBY MODE

2 _{Make sure the LCD monitor is fully open. Turn the}

LENS COVER Open/Close Ring to open the lens

cover. Set the System Select Switch to “VIDEO”,

then set the Power Switch to “CAMERA” (“AUTO” or

“PRO.”).

•The power lamp lights and the camcorder enters the

Record-Standby mode.

•The scene you are aimed at appears in the LCD

monitor, with the word “PAUSE” superimposed

upon it.

System Select Switch

LENS COVER

Open/Close Ring

START SHOOTING

3 _{Tilt the LCD monitor upward/downward for best}

viewability (੬ pg. 19) and press the Recording Start/

Stop Button.

•“

” appears in the LCD monitor while recording

is in progress.

STOP RECORDING

4 _{Press the Recording Start/Stop Button again to stop}

Power Switch

recording.

•The camcorder re-enters the Record-Standby mode.

Recording Start/Stop Button

Power lamp

NOTES:

● When you use the LCD monitor outdoors in direct

sunlight, the LCD monitor may be difficult to see. If this

happens, we recommend that you use the viewfinder

(੬ pg. 16).

● To turn the tally lamp off during recording, refer to pgs.

34 and 36.

● For other notes, refer to pg. 17.

Tally lamp

(lights while recording is in progress)

EN19

Journalistic Shooting

In some situations different angles of shooting may be

required for more dramatic results.

OPEN LCD MONITOR

1 _{Make sure the LCD monitor is fully open.}

TILT LCD MONITOR

2 _{Tilt the LCD monitor in the most convenient}

direction.

•The LCD monitor can rotate almost full circle (270°:

90° downward, 180° upward).

Interface Shooting

The person you shoot can view himself/herself in the

LCD monitor, and you can even shoot yourself while

viewing your own image in the LCD monitor.

TILT LCD MONITOR UPWARD

1 _{Open the LCD monitor and tilt it upward to 180}

degrees so that it faces forward.

•When the LCD monitor is tilted upward to an angle

of over approx. 105 degrees, the monitor image is

inverted vertically, and the viewfinder also switches

on.

START RECORDING

2 _{Point the lens toward the subject (yourself when self-}

recording) and start recording.

•During Interface Shooting, the monitor image and

indications do not appear inverted as they would

when viewing a mirror.

Self-recording

NOTE:

The monitored image can be viewed on the LCD monitor

and in the viewfinder.

Brightness Control

You can adjust the brightness of the LCD monitor by

turning the BRIGHT Dial.

ADJUST BRIGHTNESS

1 _{If you want to brighten the image . . .}

Turn the Dial towards “+”.

If you want to darken the image . . .

Turn the Dial towards “–”.

BRIGHT Dial

DIGITAL STILL CAMERA (D.S.C.) SHOOTING

SNAPSHOT Button LENS COVER

Basic Shooting

Open/Close Ring

When shooting a still image, it is not recorded onto the

tape, but it is stored in the camcorder's built-in memory in

the selected Picture Mode. A stored still image data can be

transferred to a PC, saved, and processed using a Paint

Software program (੬ pg. 51).

System

Select

Switch

A still image processed on the PC can be also inserted

onto a tape (੬ pg. 51, 65).

MODE SELECTION

SELECT OPERATION SYSTEM AND

1 _MODE

MENU Button

Turn the LENS COVER Open/Close Ring to open the

lens cover, then set the System Select Switch to

“D.S.C.”. Set the Power Switch to “PRO.”.

Power lamp

• The power lamp lights and an image appears.

SELECT PICTURE MODE

2 _{Do steps 2 and 3 of “OPERATION” on pg. 22.}

Set “PICTURE” to “FINE” or “STANDARD” in the

Menu Screen as required.

Select Dial

Display

Power Switch

Menu Screen

•There are two modes: FINE allows you to shoot up

to approx. 30 still images with higher resolution,

and STANDARD allows you to shoot up to approx.

60 still images with lower resolution.

M.W.B.

AUTO

D . ZOOM

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

SELECT SNAPSHOT MODE

PICTURE

FINE

FULL

3 _{Rotate the Select Dial to move the highlight bar to}

SNAPSHOT

“SNAPSHOT”, and press it. The SNAPSHOT Menu

appears.

RETURN

Rotate the Select Dial to move the highlight bar to the

appropriate mode among the 5 Snapshot modes

(੬ pg. 21), and press it. Selection is complete.

SNAPSHOT

SNAPSHOT Menu

FULL

PIN UP

MULTI

CLOSE MENU SCREEN

M.DRIVE

4 _{The Menu Screen reappears with the highlight bar on}

“RETURN”. Press the Select Dial again to close the

Menu Screen.

EXIT

STILL IMAGE STORAGE

Menu Screen

M.W.B.

AUTO

TAKE SNAPSHOT

D . ZOOM

1 _{Press SNAPSHOT.}

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

•Regardless of the Power Switch position (“AUTO”

or “PRO.”), Snapshot recording takes place using

the selected Snapshot mode.

PICTURE

FINE

PIN-UP

SNAPSHOT

4RETURN

•A still image is stored in the built-in memory and

displayed for approx. 2 seconds. While the still

image remains displayed, that image is in the

process of being stored in memory, and it is

therefore impossible to take another shot during that

time. When the still image disappears and the scene

you are currently aimed at appears on the screen,

you may take another shot.

Normal Screen

During Snapshot mode

No display

(Pin-Up)

(Full)

MD (M.DRIVE)

M4 (MULTI-4)

•The remaining number of shots available is

displayed.

M9 (MULTI-9)

EN21

NOTES:

FINE 12

Remaining number

of shots

● The remaining number of shots varies according to the

selected Picture Mode. In the “STANDARD” mode,

twice as many still images can be shot as in the “FINE”

mode.

30 29

(Blinking)

● Some sample images have been stored in the built-in

memory at the factory.

Pictrue mode

display

If you wish to delete them, first remove the “Protect”

function (੬ pg. 55), then perform the “Delete” function

(੬ pg. 56).

● When the Power Switch is set to “AUTO”, it is not

possible to select the Snapshot mode. You can use the

Snapshot mode you selected in the “PRO.” mode.

● If a Snapshot is taken while the camcorder is in the

WIDE mode (੬ pg. 35), the Snapshot image is recorded

without the black bars at the top and bottom of the

screen.

FULL*

(Snapshot mode with

no frame)

PIN-UP*

(Pin-Up mode)

MULTI-4 **

(Multi-Analyzer 4)

MULTI-9**

(Multi-Analyzer 9)

* There is a momentary camera shutter-type blackout

together with the image.

** Continuous camera shutter-type blackout takes place 4

or 9 times with the image, like serial photography, then

the 4 or 9 still images you took are displayed.

M. DRIVE

(Motor Drive mode)

Stores 4 still images continuously for approx. 2 seconds.

During still image storage, “MD” blinks and the 4 still

images are displayed in the order that you took them.

There is no sound effect of a shutter closing.

CONTINUED ON NEXT PAGE

D.S.C. SHOOTING (cont.)

SNAPSHOT Button

FEATURE: Picture Mode Setting

PURPOSE:

There are two image settings you can choose from

when storing in the camcorder's memory: FINE and

STANDARD. FINE allows you to shoot up to approx.

30 still images in a format based on JPEG (Joint

Photographic Experts Group) format. Since the quality

of image is better than “STANDARD”, “FINE” is more

suitable for post-production on a PC. “STANDARD”

allows you to shoot up to approx. 60 still images in a

format based on JPEG (Joint Photographic Experts

Group) format. Since in this mode, twice as many still

images can be shot as in the “FINE” mode, select this

mode when you wish to shoot many still images.

System

Select

Switch

MENU Button

OPERATION:

1) Turn the LENS COVER Open/Close Ring to open the

lens cover, and set the System Select Switch to

“D.S.C.”. Set the Power Switch to “PRO.”.

2) Press MENU. The Menu Screen appears.

Ⅲ If you wish the Picture Mode to return to the previous

setting, rotate the Select Dial to move the highlight

bar to “RETURN”.

3) Rotate the Select Dial to move the highlight bar to

“PICTURE”, and press it. The PICTURE Menu

appears.

Rotate the Select Dial to move the highlight bar to

“FINE” or “STANDARD”, and press it. Selection is

complete.

4) The Menu Screen reappears with the highlight bar

on “RETURN”. Press the Select Dial again to close

the Menu Screen.

Select Dial

Display

Power Switch

Menu Screen

M.W.B.

AUTO

D . ZOOM

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

PICTURE

FINE

FULL

SNAPSHOT

RETURN

PICTURE

PICTURE Menu

FINE

STANDARD

EXIT

Menu Screen

M.W.B.

D . ZOOM

AUTO

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

PICTURE

STD

FULL

SNAPSHOT

4RETURN

Normal Screen

Remaining number

of shots

STD 12

(Blinking)

Picture mode display

STD FINE

EN23

NOTES:

● The picture mode’s factory-preset is FINE.

● Some sample images have been stored in the built-in memory at the factory.

If you wish to delete them, first remove the “Protect” function (੬ pg. 55), then perform the “Delete”

function (੬ pg. 56).

● To store the still images you shot, we recommend that you transfer them to a computer and save them on

disk (੬ pg. 51), or transfer them to a VCR connected to the camcorder and record them onto a tape.

● When the Power Switch is set to “CAMERA” (“AUTO” or “PRO.”) and the LCD monitor is opened at an

angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically

to save power. When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be

difficult to see. If this happens, we recommend that you use the viewfinder.

● When the remaining number indicator displays “0” (blinking), it is not possible to continue storing pictures

until you delete some shots to make room for new ones. Perform “DELETE” function in the Menu Screen

to remove pictures you do not need (੬pg. 56).

● The Picture Mode can be switched to either “FINE”or “STANDARD”. Since the remaining number of shots

available depends on the selected Picture Mode, switching the Picture Mode will vary this number.

● The LENS COVER warning blinks for approx. 5 seconds when the camcorder is turned on with the cover

closed.

● When SNAPSHOT is pressed with the System Select Switch set to “VIDEO”, the picture is stored in the

camcorder's built-in memory (in the Snapshot mode selected in the “VIDEO” system) and also onto the tape

(if a tape is in the camcorder) (੬ pg. 24).

● When you shoot in a dark environment, the still image will become coarse and its true colors will be lost.

RECORDING Basic Features

SNAPSHOT Button LENS COVER

Open/Close Ring

Snapshot

This interesting feature lets you record two types of digital

still images that look like photographs onto a tape, as well

as keeping them in the camcorder’s built-in memory. It is a

great way to spice up footage of events such as parties,

weddings and graduations.

SNAPSHOT MODE SELECTION

SELECT OPERATION SYSTEM AND

1 _MODE

Turn the LENS COVER Open/Close Ring to open the

lens cover, and set the System Select Switch to

“VIDEO”. Set the Power Switch to “PRO.”

System Select Switch

MENU Button

•The power lamp lights and the camcorder enters

Record-Standby mode.

Power lamp

SELECT SNAPSHOT MODE

2 _{Press MENU. The Menu Screen appears.}

Rotate the Select Dial to move the highlight bar to

“SNAPSHOT”, and press it. SNAPSHOT Menu

appears.

Rotate the Select Dial to move the highlight bar to

“FULL” or “PIN-UP”, and press it. Selection is

complete.

Select Dial

Display

Power Switch

CLOSE MENU SCREEN

Menu Screen

3 _{The Menu Screen reappears with the highlight bar on}

M.W.B.

AUTO

D . ZOOM

“RETURN”. Then press the Select Dial to close the

Menu Screen.

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

PICTURE

FINE

FULL

SNAPSHOT

4RETURN

SNAPSHOT

SNAPSHOT Menu

FULL

PIN UP

EXIT

Menu Screen

M.W.B.

AUTO

D . ZOOM

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

PICTURE

FINE

PIN-UP

SNAPSHOT

4RETURN

(Pin-Up)

No display

(Full)

EN25

SNAPSHOT

SNAPSHOT RECORDING

TAKE SNAPSHOT

1 _{Press SNAPSHOT.}

Display (ex. Pin-Up)

•Regardless of the Power Switch position (“AUTO”

or “PRO.”), Snapshot recording takes place using

the selected Snapshot mode.

•A still image is recorded onto the tape and into the

camcorder’s built-in memory.

•First there is a momentary camera shutter-type

blackout together with the sound effect of a shutter

closing, then a still image appears. The scene you

are currently aimed at starts in the center of a black

screen and wipes in toward the corners.

The screen changes as shown in the illustrations 1

to 5 and the screens 1 to 5 are recorded onto the

tape in the selected mode. Only the still image 3 is

stored in the built-in memory in the selected mode,

then the camcorder resumes normal recording.

If you press during Record-Standby mode . . .

.... the screens 1 to 3 are recorded onto the tape in

the selected mode. Then the camcorder re-enters

the Record-Standby mode.

NOTES:

● When the remaining number indicator displays “0”

(blinking), the still image will be recorded onto the

tape but not in the built-in memory. If you wish to store

a still image in the built-in memory, ੬ pg. 56.

● The Picture Mode can be switched to either “FINE” or

“STANDARD”. Since the remaining number of shots

available depends on the selected Picture Mode,

switching the Picture Mode will vary this number.

● If SNAPSHOT is pressed with the System Select Switch

set to “D.S.C.”, ੬ pg. 20.

● Image data stored in the camcorder’s built-in memory

can be transferred to a Windows^®PC and saved using

the provided image transfer software, Picture Navigator

(੬ pg. 51). The image data transferred to a Windows^®

PC can also be further processed using Mr. Photo Gold.

● If a snapshot is taken while the camcorder is in the

WIDE mode (੬ pg. 35), the snapshot image is

recorded without the black bars at the top and bottom

of the screen.

● When a Snapshot is taken in a dark environment, the

still image recorded onto the tape and stored in

memory will become coarse and its true colors will be

lost.

FULL

(Snapshot mode with

no frame)

PIN-UP

(Pin-Up mode)

RECORDING Basic Features (cont.)

FEATURE: Zooming

Zoom in

PURPOSE:

To produce the zoom in/out effect, or an instantaneous

change in image magnification.

Digital circuitry extends the maximum magnification

offered by optical zoom. This system is called Digital

Zoom.

Zoom out

OPERATION:

Zoom In

Push the Power Zoom Lever towards “T”.

Zoom Out

Display

Push the Power Zoom Lever towards “W”.

Ⅲ The harder you push the Power Zoom Lever, the

quicker the zoom action.

Zoom indicator bar

Zoom level indicator

NOTES:

● Focusing may become unstable during Zooming. In

this case, set the zoom while in Record–Standby,

lock the focus by using the manual focus

(੬ pg. 39), then zoom in or out in Record mode.

● The zoom level indicator (5) moves during zoom.

Once the zoom level indicator reaches the top of

the zoom indicator bar, all magnification from that

point is through digital processing.

Approximate zoom ratio

Power Zoom Lever

● When using Digital Zoom, the quality of image may

suffer. To deactivate Digital Zoom, set “D.ZOOM”

to “OFF” in the Menu Screen (੬ pg. 35).

Power Switch

EN27

P. STABILIZER Button

FEATURE: Quick Review

PURPOSE:

To check the end of the last recording.

OPERATION:

1) Press “ ” and release quickly during the Record–

Standby mode.

Ⅲ Tape is rewound for about 1 second and played

back automatically, then pauses in Record–Standby

mode for the next shot.

NOTE:

Distortion may occur at the start of playback. This is

normal.

FEATURE: Retake

RETAKE (R/F) Button

PURPOSE:

To re-record certain segments.

OPERATION:

1) Make sure the camcorder is in the Record–Standby

mode.

2) Press and hold either RETAKE to reach the start point

for new recording. Pressing “F” forwards the tape

and pressing “R” reverses it.

Display

3) Press the Recording Start/Stop Button to start

recording.

Picture stabilizer

indicator

NOTE:

Noise bars appear and pictures may become

monochrome or darken during Retake. This is normal.

FEATURE: Picture Stabilizer

PURPOSE:

To compensate for unstable images caused by camera-

shake, particularly at high magnification.

OPERATION:

1) Press P. STABILIZER. “

”appears.

Ⅲ To switch off the Picture Stabilizer, press

P. STABILIZER. The indicator disappears.

NOTES:

● Accurate stabilisation may not be possible if hand

shake is excessive, or under the following conditions:

•When shooting subjects with vertical or horizontal

stripes.

•When shooting dark or dim subjects.

•When shooting subjects with excessive backlighting.

•When shooting scenes with movement in various

directions.

•When shooting scenes with low-contrast backgrounds.

● Switch off the Picture Stabilizer when recording

with the camcorder on a tripod.

● The “

” indicator appears blinking if the

Stabilizer cannot be used.

RECORDING Basic Features (cont.)

FEATURE: Video Light

PURPOSE:

To brighten the scene when natural lighting is too dim.

OPERATION:

1) Set the LIGHT OFF/AUTO/ON Switch as required:

OFF : Turns off the light.

AUTO : Automatically turns on the light when the

camcorder senses insufficient lighting on the

subject.

: Always keeps the light on as long as the

camcorder is turned on.

LIGHT OFF/AUTO/ON Switch

Ⅲ The video light can only be used with the

camcorder’s power on.

Ⅲ It is recommended to set the white balance

(੬ pg. 40) to

when you use the video light.

Ⅲ When not using the video light, turn it off to save

battery power.

DANGER

NOTES:

Ⅲ The video light can become extremely

hot. Do not touch it either while in

operation or soon after turning it off,

otherwise serious injury may result.

Ⅲ Do not place the camcorder into the

carrying case immediately after using the

video light, since it remains extremely

hot for some time.

● Even if the battery indicator (

) does not blink if

the battery pack’s charge is low, the camcorder may

turn off automatically when you turn on the video

light, or when you start recording with the video light

turned on.

● When the LIGHT OFF/AUTO/ON Switch is set to

“AUTO”:

•Depending on the lighting conditions, the video

light may keep turning on and off. In this case,

manually switch the light on or off using the

LIGHT OFF/AUTO/ON switch.

•While the “Sports” or “High Speed Shutter” mode

(੬ pg. 31) is engaged, the light is likely to stay on.

•While the “Twilight” mode (੬ pg. 31) is engaged,

the light will not activate.

Ⅲ When operating, keep a distance of

about 30 cm. between the video light

and people or objects.

Ⅲ Do not use near flammable or explosive

materials.

Ⅲ It is recommended that you consult your

nearest JVC dealer for replacing the video

light.

RECORDING Advanced Features

EN29

[Ex.: Fader]

Fade in

Fade/Wipe

These effects let you make pro-style scene transitions.

Fade- or wipe-in works at recording start, and fade- or

wipe-out works at recording end.

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to "VIDEO", and set the

Power Switch to “PRO.”.

Fade out

Display

ENGAGE FADE- OR WIPE-STANDBY

2 _MODE

EFFECT

After 2 sec.

MOSAIC

Press EFFECT to cycle through the modes as shown at

left. Once the desired mode appears, it is selected

and reserved.

EFFECT

MOSAIC

•The selected mode’s name and its indication are

displayed for approx. 2 seconds. Then the name

disappears, and only the indication remains.

START OR END RECORDING

3 _{Press the Recording Start/Stop Button to activate fade-}

in/out or wipe-in/out.

FADER

MOSAIC

SHUTTER

SLIDE

TO CANCEL FADE- OR WIPE-STANDBY

4 _MODE

Press EFFECT repeatedly until “OFF” appears.

•“OFF” is displayed for approx. 2 seconds and the

fade/wipe standby mode is canceled.

OFF

(No indication)

OFF

FADER

Fades in/out to a black screen.

MOSAIC (Fader)

Gradually turns/returns the picture into/from a mosaic

pattern.

SHUTTER (Wipe)

A black screen moves in from the top and bottom, closing

over the image like a shutter, or a new image pushes open

the black screen vertically from the centre.

SLIDE (Wipe)

A black screen moves in from the left to gradually cover

the image, or a new image moves in from right to left.

Power

Switch

EFFECT Button

NOTES:

● Pressing and holding the Recording Start/Stop Button

allows you to vary the length for the image during fade

in/out or wipe in/out.

● The screen becomes slightly reddish when the Fade/

Wipe is used with Sepia (੬ pg. 31).

● With the Electronic fog filter mode (੬ pg. 31) engaged,

the image fades in/out to a white screen.

● Even if you start shooting with the Fade/Wipe indication

displayed during Digital Still Camera Shooting, the Fade/

Wipe does not function.

System Select Switch

Recording Start/Stop

Button

RECORDING Advanced Features (cont.)

Display

P.AE

SEPIA

Programme AE With Special Effects

After 2 sec.

All you have to do to access any of the variety of shooting

effects is press P.AE.

SELECT OPERATION SYSTEM AND

P.AE

1 _MODE

SEPIA

Set the System Select Switch to “D.S.C.” or “VIDEO”,

and set the Power Switch to “PRO.”.

SELECT MODE

2 _{Press P.AE to cycle through the modes as shown on}

the left.

SEPIA

•The selected mode’s name and its indication are

displayed for approx. 2 seconds. Then the name

disappears, and only the indication remains. The

mode is activated.

SPORTS

ND ND EFFECT

NOTES:

FG FOG

TWILIGHT

● Only one mode can be engaged at a time.

● The screen becomes slightly reddish when the Fade/

Wipe (੬ pg. 29) is used in the Sepia mode.

● The screen becomes slightly dark in the High Speed

Shutter mode. Use in well-lit situations.

S1/2000

● In the “High Speed Shutter” or “Sports” modes, picture

colour may be adversely affected if the subject is lit by

alternating discharge-type light sources such as

flourescent or mercury-vapour lights.

NEGA/POSI

OFF

(No indication)

P.AE Button

Power Switch

System Select Switch

EN31

Display

Mode

Display

Mode

Sepia

Twilight

SEPIA

TWILIGHT

Sepia

Twilight

The scene being shot is recorded in sepia-tinted

(reddish-brown) monochrome, giving the effect of

an older movie. Use together with Wide (੬ pg. 35)

for the authentic look of a classic Hollywood

movie.

Dusk, twilight scenery, fireworks, etc., look more

natural and dramatic. The following happens when

Twilight mode is selected:

•Auto gain control is turned off.

•White Balance is set to “

” (FINE day mode),

•When the Power Switch is set to “D.S.C.”, the

scene is stored in black-and-white in the

camcorder’s memory.

but can also be manually changed to another

mode (੬ pg. 40).

•Auto Focus becomes available only in the range of

10 m to infinity. To focus when the subject-to-

camera distance is less than 10 m, use manual

focusing (੬ pg. 39).

Sports

SPORTS

1/2000 sec.

High Speed Shutter

Sports

S1/2000

High shutter speed clearly captures fast-moving

action.

High-Speed Shutter (1/2000s.)

Captures faster action than Sports mode.

ND Effect

ND ND EFFECT

Nega/Posi

NEGA POSI

ND Effect

A black mist darkens the picture, as when an ND

filter is used. Helps to counter the effects of glare on

the subject.

Nega/Posi (Negative/Positive)

The colours of a picture are reversed.

Electronic

Fog Filter

FG FOG

Electronic Fog Filter

Makes the picture look misty white, as when an

external fog filter is attached to the lens. Softens the

image and gives it a “fantasy” look.

NEGA POSI mode

RECORDING Advanced Features (cont.)

Date/Time Insert

This feature allows you to display the date and time on the

LCD monitor, in the viewfinder, or on a connected colour

monitor, as well as to record them manually or

automatically.

System

Select

Switch

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “VIDEO”, and set the

Power Switch to “PRO.”.

ACCESS MENU SCREEN

2 _{Press the Select Dial to display the Menu Screen.}

ACCESS “DATE/TIME DISP.” MENU

3 _{Move the highlight bar to “DATE/TIME DISP.” by}

rotating the Select Dial while in Record-Standby.

Then press it to display the DATE/TIME DISP. Menu.

Select Dial

Display

Power Switch

Menu Screen

SELECT THE DESIRED MODE

4 _{Move the highlight bar to the desired mode by}

FOCUS

AUTO

OFF

rotating the Select Dial, then press it. The desired

mode is activated.

EXPOSURE

WIDE

S . LX

MAX

TITLE

DATE TIME DISP.

•You should have already performed the Date/Time

Setting procedure (੬ pg. 11). If you haven’t, do so

first.

RETURN

CLOSE MENU SCREEN

DATE TIME DISP.

5 _{The Menu Screen reappears with the highlight bar on}

DATE/TIME DISP.

AUTO DATE

DATE

“RETURN”. Then press the Select Dial to close the

Menu Screen.

TIME

DATE&TIME

OFF

NOTES:

DISPLAY

EXIT

● The selected display can be recorded.

● If you do not want to record the display, select the OFF

mode before shooting.

● Even if you shoot with the date/time displayed during

Digital Still Camera Shooting, they will not be recorded.

FOCUS

EXPOSURE

WIDE

AUTO

OFF

S . LX

MAX

TITLE

DATE TIME DISP.

AUTO DATE

● Your camcorder automatically records the date for about

5 seconds after recording is initiated in the following

situations:

4RETURN

•After changing the date.

•After loading a cassette.

•After Auto Date Record mode is selected by rotating

the Select Dial.

● In this mode, the date is replaced after 5 seconds with

“AUTO DATE” but this is not recorded.

25 . 12 . 99

AUTO DATE

25 . 12 . 99

(DATE)

22 : 50 : 00

(TIME)

25 . 12 . 99

22 : 50 : 00

(DATE&TIME)

OFF

(No indication)

EN33

Instant Titles

The camcorder has eight preset titles in memory. You can

superimpose one of them over a picture as shown in the

illustration on left.

System

Select

Switch

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “VIDEO”, and set the

Power Switch to “PRO.”.

ACCESS MENU SCREEN

2 _{Press the Select Dial to display the Menu Screen.}

ACCESS “TITLE” MENU

3 _{Move the highlight bar to “TITLE” by rotating the}

Select Dial while in Record-Standby. Then press it to

display the TITLE Menu.

SELECT THE DESIRED MODE

4 _{Move the highlight bar to the desired mode by}

Select Dial

Display

AUTO

Power Switch

Menu Screen

rotating the Select Dial, then press it. The desired

mode is activated.

•If you wish to make the title indication disappear,

select “OFF”.

FOCUS

EXPOSURE

WIDE

AUTO

OFF

CLOSE MENU SCREEN

S . LX

TITLE

MAX

5 _{The Menu Screen reappears with the highlight bar on}

DATE TIME DISP.

“RETURN”. Then press the Select Dial to close the

Menu Screen.

RETURN

NOTE:

TITLE

Even if you shoot with the Title displayed during Digital

Still Camera Shooting, this is not recorded.

OFF

TITLE Menu

HAPPY BIRTHDAY

HAPPY HOLIDAYS

OUR FAMILY

MOVIE STAR

PARTY TIME

MERRY CHRISTMAS

WEDDING DAY

CONGRATULATIONS

EXIT

FOCUS

EXPOSURE

WIDE

AUTO

OFF

S . LX

MAX

TITLE

DATE TIME DISP.

4RETURN

CONGRATULATIONS

RECORDING Advanced Features (cont.)

Using Menu For Detailed Adjustment

This camcorder is equipped with an easy-to-use,

on-screen menu system that simplifies many of the more

detailed camcorder settings.

System Select Switch

SELECT OPERATION SYSTEM AND MODE

1 _{The operation system depends on the function you wish}

to select.

Set the System Select Switch to “VIDEO” or “D.S.C.”

according to each function's “*/**” explanation

described at the bottom of pages 35 and 36, and set the

Power Switch to “PRO.”.

Select Dial

MENU Button

Menu Screen 1

ACCESS MENU SCREEN

Display

(ex. Menu Screen available

using the MENU Button)

2 _{Menu access depends on the function you select.}

If you select the functions from the “Menu Screen

Available Using The Select Dial” described on pg. 35 . . .

.... press the Select Dial. The Menu Screen appears.

M.W.B.

AUTO

If you select the functions from the “Menu Screen

Available Using The MENU Button” described on

pg. 35 and 36 . . .

D . ZOOM

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

.... press MENU. The Menu Screen appears.

PICTURE

FINE

FULL

SNAPSHOT

SELECT FUNCTION

RETURN

3 _{Rotate the Select Dial to place the highlight bar on the}

desired function.

Menu Screen 2

BACK

• To go from Menu Screen 1 to Menu Screen 2, rotate the

Select Dial to “NEXT” and press it. To go back to Menu

Screen 1 from Menu Screen 2, rotate the Select Dial to

“BACK”, and press it.

• If the setting you want cannot be found in the Menu Screen,

place the highlight bar on “RETURN”, then go to step 6.

REC. TIME

INT. TIME

OFF

TALLY LAMP ON

JLIP ID NO

DEMO MODE OFF

RETURN

MAKE SETTING

4 _{Press the Select Dial. The setting procedure depends on}

the function you select.

REC TIME

Setting Menu

(ex. REC TIME)

If you select “FOCUS”, “EXPOSURE”, “TITLE”, “DATE/

TIME DISP.”, “DATE/ TIME”, “PICTURE” or "SNAP-

SHOT". . .

.... see respective pages (FOCUS: ੬ pg. 38, 39,

EXPOSURE: ੬ pg. 37, TITLE: ੬ pg. 33,

DATE/TIME DISP.: ੬ pg. 32, DATE/TIME: ੬ pg. 11,

PICTURE: ੬ pg. 22, SNAPSHOT: ੬ pg. 20, 25).

If you select “WIDE”, “D.ZOOM”, “TELE MACRO” or

“DEMO MODE” . . .

OFF

1 4S

1 2S

1 S

5 S

EXIT

.... the selected function’s parameter starts blinking.

Rotate the Select Dial until the desired parameter

appears. Go to step 5.

BACK

REC. TIME

INT. TIME

OFF

TALLY LAMP ON

If you select “JLIP ID NO.” . . .

JLIP ID NO

DEMO MODE OFF

.... press the Select Dial so that the number blinks, then

rotate it until the desired number appears, and press

it. Then rotate the Select Dial to move the highlight

bar to “EXIT”.

4RETURN

If you select any other functions . . .

.... rotate the Select Dial to move the highlight bar to the

Normal Screen

desired setting.

• If you decide you want to return to the previous setting,

rotate the Select Dial to move the highlight bar to “EXIT”.

END SETTING

NOTE:

5 _{Press the Select Dial. The Menu Screen reappears with}

No menu functions except “FOCUS” and

“EXPOSURE” are available while in the Record

mode.

the highlight bar on “RETURN”.

CLOSE MENU SCREEN

6 _{Press the Select Dial. The normal screen reappears.}

EN35

MENU SCREEN EXPLANATIONS

Menu Screen Available Using The Select Dial

Adjusts focus automatically.

FOCUS

AUTO

MANU

AUTO

MANU

OFF

Allows you to adjust focus manually (੬ pg. 38, 39).

Adjusts exposure automatically.

EXPOSURE

WIDE

Allows you to adjust exposure manually (੬ pg. 37).

Does not display black bars.

Allows you to record black bars at the top and bottom of the screen

to produce a cinema-like “wide-screen” effect.

If a snapshot (੬ pg. 20, 24) is taken while the camcorder is in

the WIDE mode, the snapshot image is recorded without the

black bars at the top and bottom of the screen.

To record a subject in a darkly lit environment, when it is more

convenient to shoot the subject with a brighter image even if the

picture becomes slightly coarse.

S.LX

MAX

To record a subject in a dimly lit environment, when it is more

convenient to shoot with a less coarse picture although the

subject becomes slightly dark.

NORMAL

OFF

Allows you to shoot dark scenes with no picture brightness

adjustment.

TITLE*

Allows you to superimpose one of eight preset titles (੬ pg. 33).

DATE/TIME

DISP.*

Makes the date/time settings appear in the camcorder or on a connected monitor

(੬ pg. 32).

Menu Screen Available Using The MENU Button

This Menu Screen cannot be accessed while recording.

AUTO

: FINE

This camcorder’s Automatic Colour Temperature system senses

the colour temperature of the ambient lighting for automatic

white balance adjustment. However, precise colour adjustment

is not possible under the following conditions:

•When an object is in various shades of the same colour.

•When a predominantly red or brown object is being shot outdoors.

M.W.B.

: CLOUD

: HALOGEN

In these cases, use the camcorder’s built-in preset filters for

white balance adjustment (੬ pg. 40, 41).

MWB

D. ZOOM

Allows you to use the Digital Zoom. By digitally processing and

magnifying images, zooming is possible from 16 times (the optical

zoom limit), to a maximum of 50 times digital magnification.

Digital Zoom is not available. Only optical zoom (maximum

16x magnification) can function. When set to “OFF” during

Digital Zoom, zoom magnification changes to 16x.

OFF

* Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”,

this function will not be activated although the highlight bar will move on the Menu Screen like the setting

procedure.

Functions listed without an asterisk are available with the System Select Switch set to either “D.S.C.” or

“VIDEO”.

: Factory-preset

CONTINUED ON NEXT PAGE

RECORDING Advanced Features (cont.)

Menu Screen Available Using The MENU Button (cont.)

TELE MACRO

OFF

Usually the distance to a subject where the lens is in focus

depends on the zoom magnification. Unless there is a distance of

more than 1m to the subject, the lens is out of focus at the

maximum telephoto setting. When set to “ON”, you can shoot a

subject as large as possible at a distance of approx. 60 cm.

•Depending on the zoom position, the lens may go out of focus.

DATE/TIME

Allows you to set the current date and time (੬ pg. 11).

TAPE LENGTH* Allows you to set the tape length depending on the tape used (੬ pg. 12).

Allows you to select the image setting “FINE” or “STD” when storing in the

camcorder’s memory (੬ pg. 22).

PICTURE**

SNAPSHOT

FULL

Displayed with the System Select Switch set to either “VIDEO”

(੬ pg. 24) or “D.S.C.” (੬ pg. 21).

PIN-UP

MULTI-4

MULTI-9

M.DRIVE

Displayed only with the System Select Switch set to “D.S.C.”

(੬ pg. 21).

REC TIME*

INT. TIME

This feature allows you to set the parameters for Animation and Time-Lapse

recording (੬ pg. 43).

This feature allows you to set the parameters for Self-Timer (੬ pg. 42) and Time-

Lapse recording (੬ pg. 43).

TALLY LAMP*

OFF

The tally lamp remains off at all times.

The tally lamp comes on to signal the start of recording.

JLIP ID NO.

This number is necessary when connecting the camcorder to a device such as a computer

using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.

DEMO MODE*

OFF

Automatic demonstration will not take place.

Demonstrates certain functions such as Fade/Wipe, etc. When

“DEMO MODE” is set to “ON” and the Menu Screen is closed,

the demonstration starts.

NOTES:

●When a tape whose Erase Protection tab is in the position that

allows recording is loaded in the camcorder, demonstration is

not available.

●By turning off the camcorder or inserting a tape whose Erase

Protection tab is in the position that allows recording into it,

“DEMO MODE” is set to “OFF” automatically.

●During the demonstration, all functions except zoom are

disabled.

* Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”,

this function will not be activated although the highlight bar will move on the Menu Screen like the setting

procedure.

** Activated only with the System Select Switch set to “D.S.C.”. If the System Select Switch is set to “VIDEO”,

this function will not be activated although the highlight bar will move on the Menu Screen like the setting

procedure.

Functions listed without an asterisk are available with the System Select Switch set to either “D.S.C.” or

“VIDEO”.

: Factory-preset

EN37

Exposure Control

This feature automatically adjusts the iris for the best

available picture quality, but you can override and make

the adjustment manually.

System

Select Switch

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “D.S.C.” or “VIDEO”,

and set the Power Switch to “PRO.”.

ACCESS MENU SCREEN

2 _{Press the Select Dial to display the Menu Screen.}

ACCESS “EXPOSURE” MENU

3 _{Rotate the Select Dial to move the highlight bar to}

“EXPOSURE” and press it.

ACCESS MANUAL EXPOSURE

4 _{Rotate the Select Dial to move the highlight bar to}

Select Dial

Display

Power Switch

Menu Screen

“MANU”, then press it. “00” (exposure control level

counter) appears.

ADJUST EXPOSURE

5 _{To brighten the image . . .}

FOCUS

AUTO

OFF

.... rotate the Select Dial upward. The exposure

control level counter increases (maximum +06).

EXPOSURE

WIDE

S . LX

TITLE

MAX

Go to step 6.

DATE TIME DISP.

To darken the image . . .

.... rotate the Select Dial downward. The exposure

control level counter decreases (maximum –06).

4RETURN

Go to step 6.

EXPOSURE

EXPOSURE Menu

END ADJUSTMENT OF EXPOSURE

AUTO

MANU

6 _{Press the Select Dial. The Menu Screen reappears}

with the highlight bar on “RETURN”.

CLOSE MENU SCREEN

7 _{Press the Select Dial. The Menu Screen disappears}

EXIT

and the exposure control level counter reappers to

indicate the exposure is adjusted.

Manual Exposure

Screen

NOTES:

● To return to the factory setting, select “AUTO” in step 4.

● To re-adjust exposure, repeat the procedure from step 2.

Exposure control

level counter

To brighten the image

–06

To darken the image

RECORDING Advanced Features (cont.)

Focus detection zone

Focusing

AUTO FOCUS

The camcorder’s Full Range AF system offers continuous

shooting ability from close-up to infinity. However, correct

focus may not be obtainable in the situations listed below

(in these cases use manual focusing):

•When two subjects overlap in the same scene.

•When illumination is low.*

•When the subject has no contrast (difference in bright-

ness and darkness), such as a flat, one-colour wall, or a

clear, blue sky.*

•When a dark object is barely visible in the viewfinder.*

•When the scene contains minute patterns or identical

patterns that are regularly repeated.

•When the scene is affected by sunbeams or light

reflecting off the surface of a body of water.

•When shooting a scene with a high-contrast background.

* The low-contrast warning “

” appears.

NOTES:

● If the lens is smeared or blurred, accurate focusing is not

possible. Keep the lens clean, wiping with a piece of soft

cloth if it gets dirty. When condensation occurs, wipe

with a soft cloth or wait for it to dry naturally.

● When shooting a subject close to the lens, zoom out first

(੬ pg. 26). If zoomed in in the auto focus mode, the

camcorder could automatically zoom out depending on

the distance between the camcorder and the subject.

When Tele Macro (੬ pg. 36) is activated, the

camcorder will not zoom out automatically.

EN39

MANUAL FOCUS

NOTE:

You should already have made the necessary viewfinder

adjustments (੬ pg. 14). If you haven’t, do so before

continuing.

System

Select Switch

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “D.S.C.” or “VIDEO”,

and set the Power Switch to “PRO.”.

ACCESS MENU SCREEN

2 _{Press the Select Dial to display the Menu Screen.}

ACCESS “FOCUS” MENU

3 _{Move the highlight bar to “FOCUS” by rotating the}

Select Dial, then press it.

ACCESS MANUAL FOCUS

Select Dial

Display

Power Switch

Menu Screen

4 _{Rotate the Select Dial to move the highlight bar to}

“MANU”, then press it. “ ” and “ ” appear. The

focus is locked at this point.

ADJUST FOCUS

FOCUS

AUTO

OFF

5 _{To farther subject . . .}

EXPOSURE

WIDE

.... rotate the Select Dial upward. “ ” appears and

blinks.

S . LX

TITLE

MAX

DATE TIME DISP.

Go to step 6.

To nearer subject . . .

4RETURN

.... rotate the Select Dial downward. “ ” appears

and blinks.

FOCUS

FOCUS Menu

Go to step 6.

AUTO

MANU

END ADJUSTMENT OF FOCUS

6 _{Press the Select Dial. The Menu Screen reappears}

with the highlight bar on “RETURN”.

EXIT

CLOSE MENU SCREEN

7 _{Press the Select Dial. The Menu Screen disppears and}

“

” reappears to indicate the focus is locked.

Manual Focus Screen

NOTES:

● To return to Auto Focus, select “AUTO” in step 4.

● To re-adjust Manual Focus, repeat the procedure from

step 2.

● Be sure to focus the lens in the maximum telephoto

position when you use the Manual Focus mode. If you

focus in on a certain subject in the wide-angle position,

sharply focused images cannot be obtained when

zoomed in because the depth-of-field is reduced at

longer focal lengths.

● When the focus level cannot be adjusted any farther or

closer, “ ” or “ ” will blink.

RECORDING Advanced Features (cont.)

White Balance Adjustment

A term that refers to the correctness of colour reproduction

under various lighting. If the white balance is correct, all

other colours will be accurately reproduced.

System

Select Switch

The white balance is usually adjusted automatically.

However, the more advanced camcorder operator would

prefer to control this function manually and achieve a

more professional colour/tint reproduction.

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “D.S.C.” or “VIDEO”,

and set the Power Switch to “PRO.”.

MENU Button

ACCESS MENU SCREEN

2 _{Press MENU. The Menu Screen appears.}

ACCESS WHITE BALANCE

3 _ADJUSTMENT

Move the highlight bar to “M.W.B.” by rotating the

Select Dial, then press it. The Menu Screen disap-

pears and the M.W.B. Menu appears.

Select Dial

Display

Power Switch

Menu Screen

SET FUNCTION PARAMETERS

4 _{Move the highlight bar to the required white balance}

by rotating the Select Dial.

M.W.B.

AUTO

D . ZOOM

“AUTO”

TELE MACRO OFF

DATE TIME

The white balance is adjusted automatically. This is

the factory preset position.

TAPE LENGTH T45

PICTURE

FINE

FULL

SNAPSHOT

“

: FINE”

When shooting outdoors on a sunny day.

: CLOUD”

When shooting outdoors on a cloudy day.

: HALOGEN”

4RETURN

“

M.W.B.

M.W.B. Menu

AUTO

“

FINE

CLOUD

HALOGEN

When using a video light or other similar type of

lighting.

MWB

“MWB”

When shooting with the white balance already

having been set on the subject (to set “MWB”,

੬ pg. 41).

EXIT

CLOSE MENU SCREEN

5 _{Press the Select Dial. The Menu Screen reappears}

with the highlight bar on “RETURN”. Press the Select

Dial again to close the Menu Screen.

To Return To Automatic White Balance . . .

.... select “AUTO” in step 4. Or set the Power Switch to

“AUTO”.

NOTE:

White balance cannot be used when Sepia (੬ pg. 31) is

activated.

EN41

Manual White Balance Operation

White paper

If the camera is operating in PRO. mode, perform a

Manual White Balance when shooting under various types

of lighting.

SELECT OPERATION SYSTEM AND

1 _MODE

Follow steps 1 through 4 of the white balance

adjustment (੬ pg. 40), and select “MWB”.

SET MANUAL WHITE BALANCE

2 _{Hold a sheet of plain white paper in front of the}

subject. Adjust zoom or position yourself so that the

white paper fills the screen.

System Select Switch

ENTER SETTING

3 _{Press the Select Dial until “MWB” begins blinking.}

•When the setting is completed, “MWB” stops

blinking, and the Menu Screen reappears with the

highlight bar on “RETURN”.

CLOSE MENU SCREEN

4 _{Press the Select Dial again to close the Menu Screen.}

Select Dial

Display

Power Switch

Menu Screen

To Change The Tint For Recording . . .

.... in step 2, substitute coloured paper for white. The

white balance is adjusted based on the colour,

changing the tint. Red paper — deeper green; blue

paper — orange; yellow paper — deeper purple.

M.W.B.

AUTO

D . ZOOM

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

NOTES:

PICTURE

FINE

FULL

● In step 2, it may be difficult to focus on the white paper

in some circumstances. In such a case, adjust focus

manually (੬ pg. 39).

SNAPSHOT

RETURN

● A subject can be shot under various types of lighting

conditions indoors (natural, flourescent, candlelight,

etc.). Because the colour temperature is different

depending on the light source, the tint of the subject will

differ depending on the white balance settings. Use this

function for a more natural result.

M.W.B.

M.W.B. Menu

AUTO

FINE

CLOUD

HALOGEN

MWB

● Once you adjust white balance during Manual White

Balance operation, the setting is retained even if the

power is turned off or the battery removed.

EXIT

RECORDING Advanced Features (cont.)

Self-Timer

You can set the delay between pressing the Recording

Start/Stop button and the actual start of recording. If you

secure the camcorder, you (or whoever is operating the

camcorder) can enter the scene before recording starts.

System

Select Switch

NOTE:

Before performing the following steps, make sure that:

● The System Select Switch is set to “VIDEO” or “D.S.C.”

according to your needs.

● The Power Switch is set to “PRO.”.

● The camcorder is in the Record-Standby mode.

MENU Button

ACCESS MENU SCREEN

1 _{Press MENU.}

ACCESS “INT. TIME” MENU

2 _{Rotate the Select Dial to move the highlight bar to}

“NEXT” in Menu Screen 1 and press it to display

Menu Screen 2. Then, move the highlight bar to “INT.

TIME” and press it.

Select Dial

Display

Recording Start/Stop

Button

SET INTERVAL TIME

3 _{Rotate the Select Dial to move the highlight bar to the}

Menu Screen 1

desired time, then press it. The Menu Screen

reappears with the highlight bar on “RETURN”.

M.W.B.

AUTO

D . ZOOM

TELE MACRO OFF

DATE TIME

TAPE LENGTH T45

CLOSE MENU SCREEN

PICTURE

FINE

FULL

4 _{Press the Select Dial.}

SNAPSHOT

RETURN

START DELAYED RECORDING

5 _{If you set the System Select Switch to “VIDEO” . . .}

.... press the Recording Start/Stop Button. When the

selected time has elapsed, recording begins

automatically.

Menu Screen 2

4BACK

REC. TIME

INT. TIME

OFF

TALLY LAMP ON

JLIP ID NO

DEMO MODE OFF

If you set the System Select Switch to “D.S.C.”. . .

.... press SNAPSHOT. When the selected time has

elapsed, a still image is shot automatically.

RETURN

To Cancel Self-Timer . . .

If you set the System Select Switch to “VIDEO” . . .

.... before the recording begins, press the Recording Start/

INT. TIME

REC TIME

OFF

1 4S

1 2S

1 S

15S

Stop Button to display “

TIME” in the Menu Screen to “OFF”.

”, then set “INT.

30S

1 MIN

5 MIN

5 S

If you set the System Select Switch to “D.S.C.” . . .

.... before shooting a still image, press SNAPSHOT, then

set “INT.TIME” in the Menu Screen to “OFF”.

EXIT

INT. TIME Menu

REC TIME Menu

INT. TIME indicator

REC TIME indicator

15S

INT. TIME and REC TIME indications on the normal

screen

EN43

You can record sequentially at preset time spans.

Leaving the camcorder aimed at a specific subject,

you can record subtle changes over an extended

period of time.

Animation

Time-Lapse

You can give stationary scenes or objects an illusion

of movement. This function allows you to shoot a

series of pictures, each slightly different, of the same

object for a brief period of time.

NOTE:

Before performing the following steps, make sure

that:

Before performing the following steps, make sure

that:

● The System Select Switch is set to “VIDEO”.

● The Power Switch is set to “PRO.”.

● The camcorder is in the Record-Standby mode.

● The recording mode is set to “SP”.

● The System Select Switch is set to “VIDEO”.

● The Power Switch is set to “PRO.”.

● The camcorder is in the Record-Standby mode.

● The recording mode is set to “SP”.

ACCESS MENU SCREEN

1 _{Press MENU.}

SET RECORDING TIME

SET INTERVAL BETWEEN

2 _{Rotate the Select Dial to move the highlight bar}2 _RECORDINGS

to “NEXT” in Menu Screen 1 and press it to

display Menu Screen 2. Then, move the

Rotate the Select Dial to move the highlight bar

to “NEXT” in Menu Screen 1 and press it to

display Menu Screen 2. Then, move the

highlight bar to “INT. TIME” and press it. The

INT. TIME Menu appears. Rotate the Select Dial

to move the highlight bar to the desired time,

then press it. The Menu Screen reappears.

highlight bar to “REC TIME” and press it. The

REC TIME Menu appears. Rotate the Select Dial

to move the highlight bar to the desired time,

then press it. The Menu Screen reappears with

the highlight bar on “RETURN”. Press the Select

Dial again to close the Menu Screen.

SET RECORDING TIME

3 _{Rotate the Select Dial to move the highlight bar}

START RECORDING

3 _{Press the Recording Start/Stop Button after}

to “REC TIME”, then press it. The REC TIME

Menu appears. Rotate the Select Dial to move

the highlight bar to the desired time, then press

it. The Menu Screen reappears with the

highlight bar on “RETURN”. Press the Select

Dial again to close the Menu Screen.

focusing on the subject. The recording stops

automatically after the selected period of time.

ASSEMBLE SERIES OF PICTURES

4 _{Repeat step 3 for the desired number of}

pictures.

START TIME-LAPSE RECORDING

RELEASE ANIMATION MODE

4 _{Press the Recording Start/Stop Button. Recording}

5 _{Set “REC TIME” in the Menu screen to “OFF”.}

and intervals alternate automatically.

RELEASE TIME-LAPSE MODE

NOTES:

5 _{To release when “}

” is displayed, set

● For best results, make sure the camcorder is

secured when shooting in Animation or Time-

Lapse mode.

“REC TIME” and “INT. TIME” in the Menu

Screen to “OFF”. To release when

“

” and “

press the Recording Start/Stop Button to display

”, then set “REC TIME” and “INT.

TIME” in the Menu Screen to “OFF”.

” are not displayed,

● Fade- or wipe-in/out cannot be performed during

Animation or Time-Lapse shooting.

“

● Before performing other operations following

Animation or Time-Lapse recording, make sure

the Animation or Time-Lapse mode is deactivated.

● Self-Timer, Animation and Time-Lapse are

canceled when the power is shut off or when the

cassette is ejected.

VIDEO PLAYBACK Basic Playback

LOAD A CASSETTE

Power lamp

1 _{First open the LCD monitor to an angle of over 60}

degrees. Slide EJECT to open the cassette holder, then

insert the cassette with the label facing out. Press

PUSH to ensure the holder is closed and locked.

Power Switch

SELECT OPERATION SYSTEM AND

2 _MODE

Make sure the LCD monitor is fully open. Set the

System Select Switch to “VIDEO”, and set the Power

Switch to “PLAY”.

System

Select

Switch

PLAY BACK

3 _{Press PLAY/PAUSE (}

4/6). The playback picture

appears.

STOP PLAYBACK

4 _{Press STOP (5).}

EJECT Switch

REW (2) Button

Rewind or Fast-Forward the tape

Press REW (2) to rewind, or FF (3) to fast-forward the

FF (3) Button

tape during Stop mode.

PLAY/PAUSE (4/6)

Button

NOTES:

● The camcorder shuts off automatically after about

5 minutes in Stop mode. To turn on again, set the Power

Switch to “POWER OFF”, then to “PLAY”.

STOP (5) Button

● When the Power Switch is set to “PLAY” and the LCD

monitor is opened at an angle of 60 degrees or more, the

LCD monitor switches on and the viewfinder switches

off automatically to save power.

LCD Monitor in Retracted Position

● The playback picture can also be viewed in the

viewfinder (with the LCD monitor shut) or on a

connected TV (੬ pg. 48, 49). Camcorder operation is

the same as described in this section.

● You can also view the playback picture on the LCD

monitor with it flipped over and retracted.

● If a blank portion on the tape is played back, the screen

may become black. This is not a malfunction.

Battery pack remaining power indicator

Tape counter

Recording mode indicator

Tape running

S ET SP

M 1 23 45

indicator

:Playback

:Fast-Forward/

Forward Search

:Rewind/Reverse

TAPE END

:Still Playback

VOLUNE

LCD monitor/viewfinder

indications

VIDEO PLAYBACK Features

EN45

Adjust the brightness of the LCD monitor

To brighten the image, turn the BRIGHT Dial towards “+”.

Speaker

To darken the image, turn the Dial towards “–”.

P.AE Button

EFFECT Button

Speaker Volume Control

You can adjust the speaker volume by pushing the Power

Zoom Lever.

Power Zoom Lever

ADJUST VOLUME

1 _{If you want to turn up the volume . . .}

.... push the Power Zoom Lever towards “T”.

If you want to turn down the volume . . .

.... push the Power Zoom Lever towards “W”.

Tracking

This function can be used to eliminate noise bars that

appear on-screen during playback. Initial setting is Auto

Tracking. Manual Tracking is also available.

BRIGHT Dial

ACTIVATE MANUAL TRACKING

Set to “VIDEO”.

1 _{Press P.AE and EFFECT simultaneously. Then, press}

P.AE or EFFECT as many times as necessary until the

noise bars disappear.

Display

•To return to Auto Tracking, press P.AE and EFFECT

simultaneously. “AT” blinks. When Auto Tracking

finishes, the indication disappears.

NOTES:

● When noise bars appear during playback, the

camcorder enters the Auto Tracking mode and “AT” is

displayed.

● Manual Tracking may not work with tapes recorded on

other VCRs or camcorders.

BRIGHT

VOLUME

VIDEO PLAYBACK Features (cont.)

Power Switch

FEATURE: Still Playback

PURPOSE:

To pause during playback.

OPERATION:

1) Press PLAY/PAUSE (4/6) during playback.

2) To resume normal playback, press PLAY/PAUSE

(4/6) again.

Set to “VIDEO”.

NOTE:

Noise bars appear and pictures may become

monochrome during Still Playback. This is normal.

FEATURE: Shuttle Search

PURPOSE:

To allow high-speed search in either direction.

OPERATION:

1) Press FF (3) to search forward or press REW (2

to reverse during playback.

)

REW (2) Button

FF (3) Button

2) To resume normal playback, press PLAY/PAUSE

(4/6).

NOTES:

● During playback, press and hold REW (2) or

PLAY/PAUSE (4/6)

FF (3). The search continues as long as you hold

the button. Once you release it, normal playback

resumes.

Button

STOP (5) Button

● Noise bars appear and pictures may become

monochrome or darken during Shuttle Search. This

is normal.

COUNTER R/M Button

FEATURE: Counter Memory Function

PURPOSE:

To make it easier to locate a specific tape segment.

OPERATION:

1) Press COUNTER R/M and hold for more than

1 second. The counter resets to “0:00:00”.

2) Press COUNTER R/M for less than 1 second. “M”

appears.

3) After recording or playback, press STOP (5), then

REW (2). The tape automatically stops at or close

to 0:00:00.

4) Press PLAY/PAUSE (4/6) to start playback.

NOTES:

● The counter memory functions in the Fast-Forward

and Rewind modes.

● To disable the Counter Memory Function, press

COUNTER R/M for less than 1 second so that “M”

disappears.

VIDEO PLAYBACK Using The Cassette Adapter

EN47

Cassette Adapter

Use this to play back a VHS-C video cassette recorded

with this camcorder on a VHS VCR. It is fully compatible

with any VHS video cassette recorder. The C-P7U adapter

is battery powered and automatically performs tape

loading and unloading.

INSERT BATTERY

1 _{Slide the battery cover up to remove it, and install}

one “R6 (AA)” size battery as shown in the

illustration on left, then reattach the cover.

VCR

INSERT CASSETTE IN ADAPTER

2 _{Slide the latch to open the adapter compartment}

door, then insert the cassette and close the

compartment door.

Compartment door

PLAY BACK ON CONNECTED VCR

3 _{Load the cassette adapter into the VCR and play the}

tape back as you would any other.

REMOVE CASSETTE FROM ADAPTER

4 _{Slide the latch and the compartment door opens}

automatically. This may take around 10 seconds. Do

not attempt to force the adapter open. Then, insert

your finger in the hole on the underside of the

adapter as shown in the illustration on left, and push

up and remove the cassette.

Sliding latch

NOTES:

Compact video cassette

● During tape loading and unloading, do not touch the

reels for safety and tape protection.

● During special-effect playback (slow motion, still frame,

etc.), the picture may vibrate or noise bars may appear

on the screen.

Reels

● To record on a VCR using a compact cassette and the

adapter, cover the adapter’s recording safety hole with

adhesive tape.

Recording safety hole

PLAYBACK Basic Connections And Tape Dubbing

These are some basic types of connections. When making connections, refer also to your VCR and TV

instruction manuals.

Basic Connections

Use optional Video and Audio cables.

To Video

Output

Video cable (optional)

To AUDIO and

VIDEO IN connectors

To TV or VCR

VCR

Audio cable (optional)

To Audio

Output

If your TV/VCR has the SCART connector,

use the provided cable adapter.

Connector cover*

Connection For Tape Dubbing

Use optional Video and Audio cables.

Power Switch

PLAY/PAUSE (4/6) Button

To Video

Output

Video cable (optional)

To AUDIO and

VCR (Recording deck)

VIDEO IN connectors

Audio cable (optional)

To Audio

Output

Connector cover*

If your TV/VCR has the SCART connector,

use the provided cable adapter.

* When connecting the cables, open this cover.

EN49

Basic Connections

Tape Dubbing

CONFIRM POWER-OFF STATUS

CONNECT EQUIPMENT

1 _{Make sure the camcorder’s power is off.}

1 _{Following the illustration on pg. 48, connect the}

camcorder and the VCR.

CONNECT CAMCORDER TO TV OR

2 _VCR

PREPARE FOR DUBBING

2 _{Set the camcorder’s Power Switch to “PLAY”,}

Pull out the connector cover and open it.

turn on the VCR’s power, and insert the

appropriate cassettes in the camcorder and the

VCR.

Connect as shown in the illustration (੬ pg. 48).

If using a VCR . . . go to step 3.

If not . . . go to step 4.

SELECT VCR MODE

CONNECT VCR OUTPUT TO TV

3 _{Engage the VCR’s AUX and Record-Pause}

3 _INPUT

modes.

Refer to your VCR’s instruction manual.

FIND EDIT-IN POINT

4 _{Engage the camcorder’s Play mode to find a spot}

SUPPLY POWER

4 _{Turn on the camcorder, the VCR and the TV.}

just before the edit-in point. Once it is reached,

press PLAY/PAUSE (4/6) on the camcorder.

SELECT MODE

5 _{Set the VCR to its AUX input mode, and set the}

START EDITING

5 _{Press PLAY/PAUSE (}

TV to its VIDEO mode.

4/6) on the camcorder and

engage the VCR’s Record mode.

NOTES:

STOP EDITING TEMPORARILY

● It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery

pack (੬ pg. 9).

6 _{Engage the VCR’s Record-Pause mode and press}

PLAY/PAUSE (4/6) on the camcorder.

● To monitor the picture and sound from the

camcorder without inserting a tape, set the

camcorder’s Power Switch to “CAMERA” (“AUTO”

or “PRO.”), then set your TV to the appropriate

input mode.

EDIT MORE SEGMENTS

7 _{Repeat steps 4 through 6 for additional editing,}

then stop the VCR and camcorder when

finished.

● Make sure you adjust the TV sound volume to its

minimum level to avoid a sudden burst of sound

when the camcorder is turned on.

● If you have a TV or speakers that are not specially

shielded, do not place the speakers adjacent to the

TV as interference will occur in the camcorder

playback picture.

NOTE:

If you wish to dub still images recorded with the

System Select Switch set to “D.S.C.”, play back the

still images (੬ pg. 50 – 54) instead of doing the

above steps 4 thorough 6, engage the VCR’s Record

mode and record them onto a tape.

D.S.C. PLAYBACK Basic Playback

Still images shot using this camcoder are automatically

numbered, then stored in numerical order in the built-in

memory. You can view the still images stored in memory,

one at a time, much like flipping through a photo album.

System

Select Switch

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “D.S.C.”, and set the

Power Switch to “PLAY”.

•The power lamp lights.

•The still image stored in memory is displayed.

•When no still image is stored in memory, the screen

becomes blue.

Power lamp

PLAY BACK

2 _{Press FF (}

3/PAGE+) or REW (2/PAGE–) to select

the still image you want to view.

•Each time REW (2/PAGE–) is pressed, the page

goes back, while each time FF (3/PAGE+) is

pressed, the page goes next.

•Even if you shoot a new picture after playing back a

still image with a low number, this will not

overwrite the existing picture because new pictures

are automatically stored after the still image most

recently stored in memory.

Power Switch

To move

the page next

Display

NOTES:

● When the Power Switch is set to “PLAY” and the LCD

monitor is opened at an angle of 60 degrees or more, the

LCD monitor switches on and the viewfinder switches

off automatically to save power.

● The playback picture can also be viewed in the

viewfinder (with the LCD monitor shut) or on a

connected TV (੬ pg. 48, 49). Camcorder operation is

the same as described in this section.

● When viewing a playback picture on a connected TV, it

may jitter slightly.

● You can also view the playback picture on the LCD

monitor with it flipped over and retracted.

To move

the page back

D.S.C. PLAYBACK Connection

EN51

Connection to a Windows^®PC

Image data stored in the camcorder's built-in memory can

be transferred to a Windows^®PC and saved using the

provided image transfer software, Picture Navigator. The

image data transferred to a Windows^®PC can also be

further processed using Mr. Photo Gold, and the still image

processed on the PC can be inserted onto a tape

(੬ pg. 65).

System

Select Switch

To assure safety, make sure all units are turned off before

making any connection.

Open the cover.

CONNECT TO PERSONAL

To DIGITAL

connector

1 _COMPUTER

Connect the camcorder’s DIGITAL connector to the

COM Port (RS-232C) on a Windows^®PC, using the

provided PC connection cable.

PC connection

cable (provided)

SELECT OPERATION SYSTEM AND

2 _MODE

For Windows^®:

To COM Port

(RS-232C)

Set the System Select Switch to “D.S.C.”, then set the

Power Switch to “PLAY”.

•A still image stored in memory appears.

•When transferring still images to a computer, be

sure that a still image is displayed on the screen.

RUN IMAGE TRANSFER SOFTWARE

3 _{Launch the provided software on your Windows PC.}

Transfer the still images stored in the camcorder’s

memory to the Windows^®PC. Refer to the software’s

instruction manual on the provided CD-ROM for

details.

•During transfer of the still image, the camcorder’s

screen becomes blue and “

” is dis-

Display

played. After transferring is finished, the screen

displays the same still image as in step 2.

END TRANSFERRING

4 _{Close the software, then switch off the camcorder.}

PC MODE

NOTES:

● Before transferring still images from your personal computer to the camcorder’s built-in memory, perform the

camcorder’s Picture Mode Setting (੬ pg. 20). The still images will be transferred from the personal

computer in the selected Picture Mode.

● When transferring still images from your personal computer to the camcorder, make sure the number of

images to be transferred is smaller than the camcorder's remaining number of shots available.

● Use the AC Power Adapter/Charger as the power supply instead of the battery pack.

● The still images stored in the camcorder’s memory are not automatically removed after being transferred to

the PC. If you wish to remove those still images from the camcorder's memory, delete them (੬ pg. 56, 57).

● Windows^®are trademarks of Microsoft Corporation, registered in the U.S.A. and other countries.

D.S.C. PLAYBACK Advanced Features

Using Menu For Detailed Adjustment

This camcorder is equipped with an easy-to-use,

on-screen menu system that simplifies many of the more

detailed camcorder settings.

System

Select Switch

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “D.S.C.”, and set the

Power Switch to “PLAY”.

ACCESS MENU SCREEN

2 _{Press MENU. The Menu Screen appears.}

MENU Button

SELECT FUNCTION

3 _{Rotate the Select Dial to place the highlight bar on}

the desired function.

•If the setting you want cannot be found in the Menu

Screen, place the highlight bar on “RETURN”, then

press the Select Dial.

Select Dial

Power Switch

Menu Screen

MAKE SETTING

4 _{Press the Select Dial. The setting menu of the selected}

Display

function appears. The setting procedure depends on

the function you select.

INDEX

If you select “SLIDE SHOW 1” or “SLIDE SHOW 2” . . .

SLIDE SHOW 1

SLIDE SHOW 2

PROTECT

.... a slide-show will start (੬ pg. 53).

DELETE

If you select any other functions . . .

.... see respective pages (INDEX: ੬ pg. 54,

PROTECT: ੬ pg. 55, DELETE: ੬ pg. 56, 57)

and do each procedure from step 4.

4RETURN

^EXIT<PROTECT>

Setting Menu

(ex. PROTECT)

INDEX

SLIDE SHOW 1

SLIDE SHOW 2

PROTECT

DELETE

4RETURN

Normal Screen

EN53

Menu Screen Explanations

Mode

Effect

INDEX

All still images stored in memory can be displayed six at a time. This mode is a

convenient way to look for the still image you want to view and to check the still

images you shot beforehand (੬ pg. 54).

SLIDE SHOW 1

After doing steps 1 through 4 on pg. 52, you can run through all the still images

stored in memory automatically in numerical order. Each still image is displayed.

This mode is like a regular slide-show. If you wish to stop the slide-show, press the

Select Dial twice.

SLIDE SHOW 2

After doing steps 1 through 4 on pg. 52, you can run through all the still images

stored in memory automatically in numerical order. The still image wipes in over

the last one from the bottom of the screen to the top. If you wish to stop the slide-

show, press the Select Dial twice.

PROTECT

DELETE

Lets you protect selected still images from accidental erasure. Select a still image for

which you want to perform “Protect” to put a padlock mark next to it. A still image

with a padlock mark cannot be deleted. When selecting a still image to protect, you

can check six still images stored in memory at a time (੬ pg. 55).

Allows you to delete some still images already stored in memory (੬ pg. 56).

CAUTION:

While “ENTER” is selected on the Delete Execute Menu and it is blinking, switching

off the camcorder or removing the power supply unit (battery pack or AC Power

Adapter/Charger) may cause the camcorder’s built-in memory to become corrupt.

Never remove the power supply unit at this stage.

SELECT

Allows you to check 6 still images stored in memory at a time, to select

the still images you want to delete.

ALL

Allows you to delete all the still images at once except protected

images.

D.S.C. PLAYBACK Advanced Features (cont.)

Index

You can view all still images stored in memory six at a

time. Use this mode when looking for a still image you

want to view and when checking the still images you shot

beforehand.

System

Select Switch

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “D.S.C.”, and set the

Power Switch to “PLAY”.

ACCESS MENU SCREEN

MENU Button

2 _{Press MENU. The Menu Screen appears.}

ACCESS “INDEX” MENU

3 _{Rotate the Select Dial to move the highlight bar to}

“INDEX” and press it. The “INDEX” Menu appears.

VIEW INDEX IMAGES

4 _{Rotate the Select Dial to move the frame to the}

Select Dial

Power Switch

desired still image, then press it. The one you selected

is displayed on the whole screen, then the screen

enters normal playback.

Display

•On the INDEX Menu, 6 still images are displayed at

a time. When viewing the still images that follow

the 6th one, rotate the Select Dial to move the

frame from Index No. 1 to No. 6, and then rotate it

further downward. The frame is placed on the 7th

still image automatically. Images after the 7th one

can also be accessed in the same way.

Menu Screen

INDEX

SLIDE SHOW 1

SLIDE SHOW 2

PROTECT

DELETE

4RETURN

•If the desired still image cannot be found, place the

highlight bar on “EXIT”, then press the Select Dial

twice to exit the Menu.

EXIT

<INDEX>

INDEX Menu

NOTES:

● When moving the frame from the 7th still image back to

the 6th, rotate the Select Dial upward to place the

highlight bar on “EXIT”, then rotate it further upward.

The frame is moved to the 6th still image. Perform the

same procedure for the 13th image.

● On the INDEX Menu, a star mark is displayed next to a

still image you shot in the FINE mode.

Playback Screen

EN55

Protect

This mode helps prevent accidental erasure of images. Put

a padlock mark next to the desired still image, and that still

image cannot be deleted.

System

Select Switch

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “D.S.C.”, and set the

Power Switch to “PLAY”.

ACCESS MENU SCREEN

2 _{Press MENU. The Menu Screen appears.}

MENU Button

ACCESS “PROTECT” MENU

3 _{Rotate the Select Dial to move the highlight bar to}

“PROTECT”, and press it. The PROTECT Menu

appears.

•If you do not want to perform “Protect” for any still

image, go to step 5.

Select Dial

Power Switch

Menu Screen

SET PROTECT

4 _{Rotate the Select Dial to move the frame to the}

Display

desired still image, then press it. The padlock mark

appears above the selected image.

INDEX

SLIDE SHOW 1

SLIDE SHOW 2

PROTECT

•On the PROTECT Menu, all still images are

displayed six at a time. To perform “Protect” for the

still images that come after the 6th one, rotate the

Select Dial to move the frame from Index No. 1 to

No. 6, then rotate it further downward. The frame is

placed automatically on the 7th still image. Images

after the 7th one can also be accessed in the same

way.

DELETE

4RETURN

^EXIT<PROTECT>

PROTECT Menu

•To complete “Protect”, go to step 5.

CLOSE MENU SCREEN

5 _{Rotate the Select Dial upward to place the highlight}

bar on “EXIT”, then press it twice.

To remove “Protect” . . .

^EXIT<PROTECT>

.... perform steps 1 through 3, rotate the Select Dial to

move the frame to the desired still image with the

padlock mark, then press it. The padlock mark located

above the still image disappears and the image is no

longer protected. When finished removing protection,

perform step 5.

A padlock mark

appears.

NOTES:

● To move the frame from Index No. 7 to 6, place the

highlight bar on “EXIT” by rotating the Select Dial

upward. Rotate the Select Dial further upward. The

frame is moved to the 6th still image automatically.

Perform the same procedure for still images that follow

the 13th one.

● On the PROTECT Menu, a star mark is displayed next to

a still image you shot in the FINE mode.

D.S.C. PLAYBACK Advanced Features (cont.)

Delete

When the memory in which still images are stored

becomes full, the number of remaining shots available

reaches “0” (blinking). In this situation it becomes

impossible to take your next shot. Delete some still images

already stored in memory to make room for new shots.

System

Select Switch

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “D.S.C.”, and set the

Power Switch to “PLAY”.

MENU Button

ACCESS MENU SCREEN

2 _{Press MENU. The Menu Screen appears.}

ACCESS “DELETE” MENU

3 _{Rotate the Select Dial to move the highlight bar to}

“DELETE”, and press it. The DELETE Menu appears.

SELECT DELETE MODE

Select Dial

Power Switch

4 _{Rotate the Select Dial to move the highlight bar to}

“SELECT” or “ALL”, then press it.

To select a still image by checking the still images

stored in memory . . .

Display

Menu Screen

INDEX

.... select “SELECT”, then go to step 5.

To delete all the still images stored in memory at

once without checking them . . .

SLIDE SHOW 1

SLIDE SHOW 2

PROTECT

DELETE

.... select “ALL”, then go to step 6.

To quit the Delete Mode . . .

.... rotate the Select Dial to place the highlight bar

on “EXIT”, then press it twice.

4RETURN

DELETE

DELETE Menu

SELECT ON DELETE SELECT MENU

SELECT

ALL

5 _{Rotate the Select Dial to move the frame to the}

desired still image, then press it. “ ” appears above

the selected still image. When you have finished

selecting all the desired still images, rotate the Select

Dial upward to place the highlight bar on “NEXT”,

then press the Select Dial.

In case of “ALL”

EXIT

^NEXT<DELETE>

•On the Delete Select Menu, the still images are

displayed six at a time. To delete the still images

that follow the 6th one, rotate the Select Dial to

move the frame from No. 1 to No. 6, then rotate it

further downward. The frame is moved to the 7th

still image automatically. Perform the same

In case of

“SELECT”

procedure for still images that follow the 7th one.

Delete Select Menu

DELETE

CANCEL

ENTER

Delete Execute Menu

Menu Screen

EN57

In case of “SELECT”

ACCESS DELETE EXECUTE MENU

6 _{Rotate the Select Dial to move the highlight bar to}

NEXT <DELETE>

“CANCEL” or “ENTER”, then press it.

•“CANCEL” does not delete the selected still images

and the screen returns to the Menu Screen.

•“ENTER” deletes the selected still images. While

“ENTER” blinks, they are in the process of being

deleted from memory. After deleting is finished, the

screen returns to the Menu Screen.

CLOSE MENU SCREEN

7 _{Press the Select Dial again to exit the Menu Screen.}

CAUTION:

If you check the remaining still images on

INDEX Menu after deleting...

While “ENTER” is selected on the Delete

Execute Menu and it is blinking, switching off

the camcorder or removing the power supply

unit (battery pack or AC Power Adapter/Charger)

may cause the camcorder’s built-in memory to

become corrupt. Never remove the power

supply unit at this stage.

EXIT

<INDEX>

NOTES:

● Before deleting some still images stored in memory,

perform “Protect” for the necessary ones (੬ pg. 55) or

save them on a PC so that you do not lose them

accidentally (੬ pg. 51).

● Even if “ALL” is selected on the DELETE Menu, it is not

possible to delete a still image with a padlock mark.

“ALL” only deletes all still images that are not protected.

After images are deleted from memory, the remaining

images are automatically moved up to fill in any gaps in

the numerical sequence. The Index No. for images

protected (with the padlock mark) may therefore change.

● When selecting the desired still image in step 5, to move

the frame from No. 7 to 6, place the highlight bar on

“EXIT” by rotating the Select Dial upward. Rotate it

further upward to move the frame to No. 6. Perform the

same procedure for still images that follow the 13th one.

● On the Delete Select Menu, a star mark is displayed next

to a still image you shot in the FINE mode.

● If the remaining number of shots is not 30 in the FINE

mode or 60 in the STANDARD mode when “ALL” is

selected on the DELETE Menu, initialize the camcorder’s

memory (੬ pg. 69).

USING THE REMOTE CONTROL UNIT

The Full-Function Remote Control Unit can operate this

camcorder from a distance as well as the basic operations

(Playback, Stop, Pause, Fast-Forward and Rewind) of your

VCR. The RM-V709U remote control unit makes

additional recording functions possible.

Lock hole

Installing The Battery

The remote control uses one lithium battery (CR2025).

PULL OUT BATTERY HOLDER

1 _{Pull out the battery holder while sliding the lock}

hole.

INSERT BATTERY IN HOLDER

2 _{Insert the battery in the holder, and be sure to have}

the “+” mark visible.

RE-INSERT HOLDER

3 _{Slide the holder back in until you hear a click.}

•Read the caution concerning lithium batteries

(੬ pg. 2).

RM-V709U (provided)

Functions

Buttons

With the camcorder’s Power Switch set

to “CAMERA” (“AUTO” or “PRO.”).

With the camcorder’s Power Switch

set to “PLAY”.

1 PAUSE IN Connector

—

੬ pg. 61

2 Infrared beam

Transmits the beam signal.

transmitting window

3 MBR SET Button

4 INT. TIME Button

5 REC TIME Button

6 FF Button

—

੬ pg. 60

Self-Timer/Time-Lapse (੬ pg. 59)

Animation/Time-Lapse (੬ pg. 59)

Retake (forward) (੬ pg. 27)

—

Fast-Forward, Forward Shuttle Search

(੬ pg. 44, 46)

7 REW Button

Retake (rewind)/Quick Review (੬ pg. 27) Rewind, Reverse Shuttle Search

(੬ pg. 44, 46)

8 PAUSE Button

9 PLAY Button

—

Pause (੬ pg. 46)

Playback start (੬ pg. 44)

—

0 SNAPSHOT Button

Functions same as snapshot button on

the camcorder. (੬ pg. 20, 24)

! START/STOP Button

@ VISS Button

Functions the same as the Recording Start/Stop Button on the camcorder.

Ineffective

# ZOOM (T/W) Buttons

$ VCR CTL Button

% DUB Button

Zoom in and out (੬ pg. 26)

—

੬ pg. 60

Audio dubbing (੬ pg. 66)

Stop (੬ pg. 44)

^ STOP Button

& INSERT Button

* R.A.EDIT Buttons

Insert Editing (੬ pg. 64, 65)

੬ pg. 62

EN59

FEATURE: Self-Timer, Animation and

Time-Lapse

Transmitted beam

effective area

PURPOSE:

The remote control lets you set/release Interval Timer

and Rec Time functions without using the Menu

Screen.

OPERATION:

Remote sensor

Self-Timer

1) Set

Instead of performing steps 1 through 4 on pg. 42

(“Self-Timer”), press INT. TIME on the remote control.

Each time INT. TIME is pressed, the Interval Timer

indicator appears, changing in the following order:

15S, 30S, 1MIN, 5MIN and No indication (off).

2) Release

When using the remote control, be sure to point it at

the remote sensor. The illustration shows the

approximate transmitted beam effective area for

indoor use.

The transmitted beam may not be effective or may

cause incorrect operation outdoors or when the

remote sensor is directly exposed to sunlight or

powerful lighting.

Instead of setting “INT. TIME” to “OFF” in the Menu,

press INT. TIME on the remote control until the

Interval Timer indicator disappears.

Animation

Interval timer indicator

1) Set

Instead of performing steps 1 and 2 on pg. 43

(“Animation”), press REC TIME on the remote

control. Each time REC TIME is pressed, the Rec

Time indicator appears, changing in the following

order: 1/4S, 1/2S, 1S, 5S and No indication (off).

2) Release

Index code

marking

1MIN

INDEX

Instead of using the Menu in step 5 on pg. 43, press

REC TIME on the remote control until the Rec Time

indicator disappears.

Rec time indicator

Time-Lapse

1) Set

Instead of performing steps 1 through 3 on pg. 43

(“Time-Lapse”), press INT. TIME and REC TIME on

the remote control. Each time INT. TIME is pressed,

the Interval Timer indicator appears, changing in the

following order: 15S, 30S, 1MIN, 5MIN and No

indication (off). Each time REC TIME is pressed, the

Rec Time indicator appears, changing in the

following order: 1/4S, 1/2S, 1S, 5S and No indication

(off).

Remote sensor

2) Release

Instead of using the Menu in step 5 on pg. 43, press

INT. TIME and REC TIME on the remote control until

the indicators disappear.

NOTE:

Also refer to pgs. 42 and 43.

START/STOP

REC TIME

INT. TIME

RM-V709U

(provided)

USING THE REMOTE CONTROL UNIT (cont.)

Random Assemble Editing [R.A.Edit]

Create edited videos easily using your camcorder as

the source player. You can select up to 8 “cuts” for

VCR (Recording deck)

automatic editing, in any order you like. R.A.Edit is

more easily performed when the RM-V709U MBR

(Multi-Brand Remote, ੬ pg. 58) is set to operate

with your brand of VCR (see VCR CODE LIST), but

can also be performed by operating the VCR

manually.

Before operation, make sure the lithium battery is

installed in the remote control RM-V709U

(੬ pg. 58).

SET REMOTE/VCR CODE

SET REMOTE TO OPERATE VCR

MBR SET

VCR CTL

1 _{Turn off the power to the VCR and point the}

remote towards the VCR’s infrared sensor. Then,

referring to the VCR CODE LIST on the left,

press and hold MBR SET, and press button (A)

and then (B).

RM-V709U

(provided)

•The code is automatically set once you release

MBR SET, and the VCR’s power comes on.

OPERATE VCR

2 _{Make sure the VCR’s power is on. Then, while}

VCR CODE LIST

holding VCR CTL, press the button on the

remote for the desired function. The functions

the remote can control are PLAY, STOP, PAUSE,

FF, REW and VCR REC STBY (you do not need

to press VCR CTL for this one).

VCR BRAND

NAME

BUTTONS

(A) (B)

VCR BRAND

NAME

BUTTONS

(A) (B)

AKAI

2ꢀ

4ꢀ

PHILIPS

9ꢀ

5ꢀ

1ꢀ

4ꢀ

1ꢀ

6ꢀ

2ꢀ

3ꢀ

2ꢀ

You are now ready to try Random Assemble

Editing.

BLAUPUNKT

FERGUSON

7ꢀ

8ꢀ

IMPORTANT

Although the MBR is compatible with JVC VCRs and

those of many other makers, it may not work with

yours or may offer limited functions.

GRUNDIG

HITACHI

4ꢀ

ꢀ

SANYO

6ꢀ

NOTES:

6ꢀ

SELECO,

REX

1ꢀ

● If the VCR’s power does not come on in step 1, try

another code from the VCR CODE LIST.

● Some brands of VCR do not come on automati-

cally. In this case, turn the power on manually and

try step 2.

JVC

1ꢀ

6ꢀ

SHARP

5ꢀ

`ꢀ

9ꢀ

1ꢀ

6ꢀ

7ꢀ

SONY

MITSUBISHI

7ꢀ

● If the remote control is not able to control the VCR,

use the controls on the VCR.

● When the remote control’s battery runs out, the

VCR brand you have set will be erased.

In that case, replace the old battery with a new one

and reset the VCR brand.

NEC

7ꢀ

ꢀ

THOMSON,

TELEFUNKEN,

SABA,

PANASONIC

3ꢀ

7ꢀ

1ꢀ

4ꢀ

NORDMENDE

TOSHIBA

9ꢀ

EN61

MAKE CONNECTIONS

CONNECT TO . . .

JVC VCR EQUIPPED WITH REMOTE

PAUSE TERMINAL

Connect the editing cable to the Remote PAUSE

terminal.

JVC VCR NOT EQUIPPED WITH REMOTE

PAUSE TERMINAL BUT EQUIPPED WITH

R.A. EDIT CONNECTOR

Open

the cover.

Open the cover.

Connect the editing cable to the R.A.EDIT

connector.

To J terminal

(JLIP)

To Audio

Output

To Video

Output

VCR OTHER THAN TYPE

Connect the editing cable to the RM-V709U’s

PAUSE-IN connector.

PREPARE CAMCORDER

2 _{Insert a recorded tape. Set the System Select Switch to}

Audio cable

(optional)

Video cable

(optional)

“VIDEO”, and set the Power Switch to “PLAY”.

PREPARE VCR

Editing cable

(provided, ø3.5

mini-plug cable)

3 _{Turn the power on, insert a recordable tape and}

engage the AUX mode (refer to the VCR’s instructions).

To AUDIO

and VIDEO IN

connectors

If your TV/VCR has the

SCART connector, use the

provided cable adapter.

To Remote

PAUSE

VCR

To PAUSE-IN

RM-V709U

(provided)

CONTINUED ON NEXT PAGE

USING THE REMOTE CONTROL UNIT (cont.)

SELECT SCENES

Remote sensor

START SOURCE PLAYBACK

4 _{Press PLAY, then press ON/OFF on the remote}

control. Make sure to point the remote control at the

camcorder’s remote sensor.

•The R.A. Edit counter display appears.

5 _{Press REW or FF to locate the beginning of the scene}

you want, then press IN/OUT to register that point.

•The data appears under “IN” on the display.

6 _{Press REW or FF to locate the end of the scene and}

press IN/OUT to register it.

Power Switch

•The data appears under “OUT” on the display.

•The total time of the registered scene(s) is displayed

PAUSE

CANCEL

ON/OFF

REW

PLAY

IN/OUT

at the bottom of the screen.

7 _{Repeat steps 5 and 6 for each additional scene}

(as many as 8).

RM-V709U

(provided)

MAKE CORRECTIONS (IF NECESSARY)

8 _{Press CANCEL during steps 5 and 6 to erase the most}

recently registered point.

OUT

0 00 25

-- -- --

NOTES:

● There must be at least one second between an in-point

and its corresponding out-point.

● To ensure correct operation, there should be at least

15 seconds between an out-point and the next in-point.

● Blank portions of a tape cannot be registered as in-points

or out-points.

● If it takes more than 5 minutes to search for an in-point,

the VCR’s Record-Pause mode is cancelled and editing

does not take place.

● Pressing ON/OFF clears all in- and out-points from

memory.

● Leave a small margin for error around each in-point to

ensure the scene is recorded in its entirety.

● Turning off the camcorder’s power erases all registered

in- and out-points.

COUNTER

TOTAL

0 00 25

0 00 00

OUT

0 00 25

0 01 05

0 03 18

0 03 31

0 02 33

0 02 53

0 04 11

-- -- --

COUNTER

TOTAL

0 04 11

0 01 13

EN63

AUTOMATIC EDITING TO VCR

Original tape (camcorder)

PREPARE SOURCE TAPE

OUT

IN OUT

OUT

9 _{Rewind the tape in the camcorder to the beginning of}

the scene you want to edit and press PAUSE.

ENGAGE VCR’S RECORD-PAUSE MODE

10 _{Point the remote control towards the VCR’s infrared}

sensor and press VCR REC STBY, or manually engage

Edited tape (VCR)

the VCR’s Record-Pause mode.

STOP (5) Button

BEGIN AUTOMATIC EDITING

REW (2) Button

Press MENU/DISPLAY on the camcorder, and the

previously selected scenes are copied to the VCR in

the specified order.

PAUSE (6) Button

While editing, the R.A. Edit counter of the scene

which is being copied is shown with a blinking

highlight.

Remote Sensor

•Pressing START/STOP on the remote control does

not start editing.

MENU/DISPLAY

Button

END AUTOMATIC EDITING

12 _{When all selected scenes have been copied, the}

camcorder and VCR enter the Still or Pause mode.

Press STOP on both units. To make the R.A. Edit

counter display disappear, press ON/OFF.

Power

Switch

Recording Start/Stop

Button

•When finished editing, be sure to disconnect the

editing cable and the audio/video cable.

RM-V709U

(provided)

NOTES:

● If you performed step 1

on page 61 (“MAKE CONNEC-

TIONS”), keep the remote control pointed at the VCR during

editing.

ON/OFF

VCR REC STBY

● The on-screen display only appears while the camcorder

searches for each scene.

● There may be noise at in- or out-points on the edited tape

with certain VCRs.

SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL

Using the RM-V709U, it is also possible to perform deck-to-deck

Random Assemble Editing. The playback deck must be an R.A. Edit-

capable JVC VCR. The recording deck can be...

Ⅲ a VCR other than JVC, or

AV OUT

Player (JVC VCR)

Ⅲ a JVC VCR which has neither a Remote PAUSE nor an R.A. EDIT

connector

To R.A. EDIT Editing cable

(provided)

AV IN

How to use:

— Connect the playback deck and RM-V709U as shown on the left.

— Set the RM-709U to correspond to the brand of the recording

deck. (੬ pg. 60)

Recording deck

— For Random Assemble Editing procedure, please refer to the

instruction manual of the JVC VCR you are using as the playback

deck.

To PAUSE IN

Notes:

Ⅲ RM-V709U cannot be used to control the playback deck.

Ⅲ RM-V709U is capable of controlling basic operations of the

recording deck. While pressing VCR CTL, press PLAY, STOP,

PAUSE, FF or REW for these functions. (Not possible with some

brands and models.) Other buttons cannot be used.

Ⅲ To put the recording deck in the Record-Pause mode, use the

controls on the recording deck itself.

RM-V709U

(provided)

USING THE REMOTE CONTROL UNIT (cont.)

Insert Editing (VIDEO)

Power Switch

You can record a new scene onto a previously recorded

tape, replacing a section of the original recording with

minimal picture distortion at the in- and out-points. The

original audio remains unchanged.

System Select Switch

NOTE:

Use the RM-V709U remote control unit to perform this

procedure.

SELECT OPERATION SYSTEM AND

1 _MODE

Set the System Select Switch to “VIDEO”, and set the

Power Switch to “PLAY”.

REW (2) Button

FIND EDIT-OUT POINT

2 _{Play back the tape, locate the Edit Out point and}

FF (3) Button

PLAY/PAUSE (4/6) Button

press PAUSE on the camcorder or the remote control.

RESET COUNTER

STOP (5) Button

3 _{Press and hold COUNTER R/M for more than}

1 second to reset the tape counter, then press again

for less than 1 second so that “M” appears.

COUNTER R/M Button

FIND EDIT-IN POINT

Display

4 _{Press REW to go a little beyond the beginning of the}

Insert editing

indicator

scene you want to replace, press PLAY to view the

recorded tape, and press PAUSE exactly at the Edit-In

point where the new scene should start.

M 0 12 34

Tape counter

ENGAGE INSERT EDITING MODE

5 _{Press and hold INSERT, and without releasing}

INSERT, press and release PAUSE. The Insert Editing

mode is engaged. When the scene the camcorder is

aimed at appears on the screen, go to the next step.

Remote sensor

BEGIN INSERT EDITING

6 _{Press START/STOP. When the counter reaches}

“0:00:00”, editing stops automatically and the

camcorder enters the Insert-Pause mode.

END INSERT EDITING

7 _{Press STOP.}

NOTES:

● During Insert Editing, the original audio will be heard

from the speaker.

● After step 5, Retake (੬ pg. 27) can be performed.

● The tape may stop slightly before or after the designated

end point, and noise bars may appear. Neither indicates

a defect in the unit.

● Only the video signal is recorded in the Insert Editing

mode.

START/STOP

PAUSE

REW

STOP

INSERT

PLAY

RM-V709U

(provided)

EN65

Insert Editing (Insert A Still Image From

Power Switch

The Built-in Memory Onto A Tape)

You can insert a still image stored in the camcorder's built-

in memory into a previously recorded tape, replacing a

section of the original recording with minimal picture

distortion at the in- and out-points. The original audio

remains unchanged.

System Select Switch

Perform steps 1 through 5 in Insert Editing (VIDEO)

(੬ pg. 64) before the following procedure.

NOTE:

Use the RM-V709U remote control unit to perform this

procedure.

SELECT STILL IMAGE

REW (2/PAGE–) Button

1 _{First set the System Select Switch to “D.S.C.”. Press}

FF (3/PAGE+) Button

PLAY/PAUSE (4/6) Button

REW (2/PAGE–) or FF (3/PAGE+) to select the

still image you wish to insert.

BEGIN INSERT EDITING

STOP (5) Button

2 _{Press START/STOP. When the counter reaches}

“0:00:00”, editing stops automatically and the

camcorder enters the Insert-Pause mode.

COUNTER R/M Button

To insert still images in sequential order onto the

tape . . .

Display

... press REW (2/PAGE–) or FF (3/PAGE+) to

move the page forward.

Insert editing

indicator

To insert still images at random onto the tape . . .

... first record the still image you selected in step 1

onto the tape, then press START/STOP to engage

the Insert-Pause mode. To select another still

M 0 12 34

Tape counter

image, press REW (2/PAGE–) or FF (3

PAGE+) again, then press START/STOP. Insert-

Editing begins.

Remote sensor

END INSERT EDITING

3 _{Press STOP.}

NOTES:

● The tape may stop slightly before or after the designated

end point, and noise bars may appear. Neither indicates

a defect in the unit.

● Only video signal is recorded in the Insert Editing mode.

START/STOP

PAUSE

REW

STOP

PLAY

INSERT

RM-V709U

(provided)

USING THE REMOTE CONTROL UNIT (cont.)

Display

Audio Dubbing

Audio dubbing

indicator

You can record a new soundtrack on a prerecorded tape

M 0 05 20

(normal audio only).

Perform steps 1, 2 and 3 of the Insert Editing (VIDEO)

procedure (੬ pg. 64) before continuing.

•The sound comes from the built-in microphone.

FIND EDIT-IN POINT

1 _{Press REW to go a little beyond the beginning of the}

scene onto which you want to dub the new audio,

press PLAY to view the recorded tape, then press

PAUSE at exactly the point where dubbing should

start.

Remote sensor

ENGAGE AUDIO DUB-STANDBY MODE

2 _{Press and hold A. DUB, and without releasing}

A. DUB, press and release PAUSE.

BEGIN AUDIO DUBBING

3 _{Press PLAY. When the counter reaches “0:00:00”,}

Audio Dubbing stops automatically and the

camcorder enters the Audio Dub-Standby mode.

Microphone

END AUDIO DUBBING

4 _{Press STOP.}

Set to “VIDEO”

PAUSE

NOTES:

● Do not press FF or REW during Audio Dub-Standby, or

the edit points will not be accurate.

A. DUB

STOP

● If the microphone is too close to the TV, or if the TV’s

volume is too high, whistling or howling may occur.

REW

PLAY

NOTES (for Insert Editing and

Audio Dubbing):

RM-V709U

(provided)

● Insert Editing and Audio Dubbing may not work

correctly if the tape contains blank segments, or if the

recording speed was changed during the original

recording.

● To edit/dub onto a tape, make sure the Erase Protection

tab is in the position that allows recording. If not, slide

the tab. Some cassettes have removable tabs. If the tab

has been removed, cover the hole with adhesive tape.

● Do not press STOP during Insert Editing or Audio

Dubbing, or the edit points will not be accurate.

● During Insert Editing and Audio Dubbing, when Insert-

Pause or Audio Dub-Standby is engaged, the counter

may go slightly past “0:00:00”. Recording, however,

stops at exactly 0:00:00.

TROUBLESHOOTING

If, after following the steps in the chart below, the problem still exists, please consult your JVC dealer.

EN67

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might

prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power

Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as usual from the beginning.

SYMPTOM

POSSIBLE CAUSE(S)

POWER

No power is supplied.

● The battery pack has not been attached correctly (੬pg. 8).

● The battery pack is not charged (੬ pg. 8).

●

The power supply has not been correctly connected (

੬

pg. 9).

The power suddenly goes off and

does not come back on by itself.

● The battery pack has completely discharged.

● Remove the cassette and disconnect the power source, then

after a few minutes, try turning the power back on. If it still

doesn’t come on, consult your nearest JVC dealer.

OTHER

Some functions are not available.

● The Power Switch is set to “AUTO”.

●

Certain combinations of modes or effects are not possible to use.

During recording, the indications do

not appear.

● Press DISPLAY for longer than 1 second to make the

indications appear (੬ pg. 17).

Vertical white lines appear when

shooting a very bright object.

●

This sometimes occurs when the contrast between the back-

ground and the object is great. It is not a defect of the camcorder.

Bright, crystal-shaped spots appear in

the LCD monitor and the viewfinder.

● Sunlight is directly entering the lens. This is not a defect of

the camcorder.

The rear of the LCD monitor is hot.

● The light used to illuminate the LCD monitor causes it to be

hot. Close the LCD monitor to turn it off or set the power

switch to “OFF”, and let the unit cool down.

Coloured bright spots appear all over

the LCD monitor or the viewfinder.

●

The LCD monitor and the viewfinder are made with high-precision

technology. However, black spots or bright spots of light (red, green

or blue) may appear constantly on the LCD monitor or in the

viewfinder. These spots are not recorded on the tape. This is not

due to any defect of the unit. (Effective dots: more than 99.99 %.)

The indicators and the picture colour

on the LCD monitor are not clear.

● This may occur when the surface or the edge of the LCD

monitor is pressed.

The LCD monitor, the viewfinder and

the lens have become dirty (ex.

fingerprints).

● Wipe them gently with soft cloth. Gently wipe the LCD

monitor in a semicircle because wiping strongly spreads the

stain and it won’t come out easily.

An error number (i.e. E03) appears.

●

Turn the camcorder’s power off, then disconnect the power

source. After a few minutes, try turning the power on again. If

the error number still appears, consult your nearest JVC dealer.

The image is out of focus.

● The dioptre needs to be adjusted (੬ pg. 14).

● The scene being shot is adversely affecting the operation of

Auto Focus (੬ pg. 38).

Even though the Lens Cover is open,

the Lens Cover Warning indicator

blinks.

● The Lens Cover Warning indicator may blink when the

camcorder is used in dark areas, regardless of the position

of the Lens Cover.

TROUBLESHOOTING (cont.)

When the System Select Switch is set to “VIDEO”:

SYMPTOM

POSSIBLE CAUSE(S)

RECORDING

Recording cannot be performed.

● Make sure the Erase Protection tab is in the position that

allows recording. If not, slide the tab. Some cassettes have

removable tabs. If the tab has been removed, cover the

hole with adhesive tape (੬ pg. 13).

● If the System Select Switch is set to “D.S.C.”, it is not

possible to record onto the tape. Change the Switch

position to “VIDEO” (੬ pg. 16).

Animation or Time-Lapse is not

available.

● Before recording in the Animation mode at the very

beginning of a tape, set the camcorder to the Recording

mode for about 5 seconds, so that the tape runs smoothly.

Using the Fade-in function at this point is a good way to

begin an animated programme (੬ pg. 43, 59).

Recording does not start.

● The camcorder Power Switch has not been set to

“CAMERA” (“AUTO“ or “PRO.“) (੬ pg. 16).

PLAYBACK

The tape is running, but there is no

playback picture.

● The TV has not been set to its VIDEO mode or channel.

● If A/V connection is used, the TV’s VIDEO/TV Switch has

not been set to VIDEO.

Playback cannot be performed.

● If the System Select Switch is set to “D.S.C.”, it is not

possible to play back a tape. Change the Switch position to

“VIDEO” (੬ pg. 44).

Playback picture is blurred or

interrupted.

● The video heads are dirty or worn out. Consult your nearest

JVC dealer for head cleaning or replacement.

The counter indication is blurred

during Still playback.

● This is normal.

TAPE TRANSPORT

The tape stops during fast-forward or

● The Counter Memory Function has been activated

(੬ pg. 46).

rewind.

Rewinding or fast-forwarding cannot

be performed.

● The tape is already fully wound on one reel or the other.

OTHER

The picture is blurred in the Quick

Review or Retake mode.

● This is normal while recording in the LP mode. Some noise

may be present while recording in the SP mode (੬ pg. 12).

The date and time displays

disappear.

● If you remove the power source from the camcorder while

the power is on, all settings and selections are erased. Make

sure to turn the camcorder’s power off before disconnecting

the power source.

The wrong date and time are

displayed/recorded.

● If you have not performed Date/Time Setting (੬ pg. 11),

the date and time are not displayed/recorded correctly. Be

sure that Date/Time setting is carried out.

The tape will not eject.

● The battery pack is running low.

● If the LCD monitor is not open over 60 degrees, EJECT

switch does not function.

EN69

When the System Select Switch is set to “D.S.C.”:

SYMPTOM

POSSIBLE CAUSE(S)

SHOOTING

Although the SNAPSHOT Button is

pressed, a still image is not stored in

the built-in memory.

● When the number of remaining shots available reaches “0”

(blinking), it becomes impossible to take your next shot.

Perform “DELETE” function to remove some still images

already stored in memory (੬ pg. 56).

Self-Timer Shooting is not available.

● Pressing the Recording Start/Stop Button does not start

recording in the Self-Timer Shooting procedure. Press the

SNAPSHOT Button (੬ pg. 42).

It is not possible to shoot in

sucession.

● A still image is in the process of being stored in memory for

approx. 2 seconds after the SNAPSHOT Button is pressed.

During that time, it is impossible to take another shot. When

the still image disappears and the scene you are currently

aimed at appears on the screen, take another shot (੬pg. 20).

PLAYBACK

Although “ALL” is selected in the

DELETE Menu Screen, all still images

cannot be deleted.

● The “Protect” function is in effect for some still images. If

they are not necessary, cancel the “Protect” function, then

try deleting all still images again (੬ pg. 55).

OTHER

Date/Time Insert is not performed

● It is not possible to display the date/time on a still image.

● It is not possible to display the Instant Titles on a still image.

● It is not possible to set “REC TIME” in the Menu Screen.

while shooting a still image.

Instant Titles are not displayed while

shooting a still image.

Some settings cannot be changed in

the Menu Screen.

Since the camcorder is a microcomputer-controlled device, external noise and interference (from a TV, a

radio, etc.) might prevent it from functioning properly. For example, when a still image you shot is stored

in the camcorder's built-in memory, the above may cause the following: Although the remaining number

of shots indicator shows that shooting is possible, a still image cannot be stored in memory after shooting.

In such a case, initialize the memory by following steps 1 through 3 below. Please note that initialization

deletes all the still images (including ones for which you performed the “Protect” function) stored in the

camcorder’s memory. If you wish to keep any of the still images that are stored in memory, before

initialization first transfer them to a PC and save them. If image data is corrupt, transfer is impossible.

1. Set the System Select Switch to “D.S.C.”, then set the Power Switch to

“PLAY”.

FORMAT

CANCEL

ENTER

2. Press the SP/LP Recording Mode Button for more than 2 seconds. The

FORMAT Menu Screen appears.

3. Rotate the Select Dial to move the highlight bar to “CANCEL” or

“ENTER”, then press it.

•“CANCEL” does not initialize the memory.

•“ENTER” initializes the memory. During initialization, “ENTER” blinks.

When initialization is complete, the screen becomes blue back.

FORMAT Menu

CAUTION:

While “ENTER” is selected and it is blinking, switching off the camcorder or removing the power supply

unit (battery pack or AC Power Adapter/Charger) may cause the camcorder’s built-in memory to become

corrupt. Never remove the power supply unit at this stage.

INDEX Controls, Connectors And Indicators

u 2

e r

3 4 5 6

y * ( i )

EN71

Controls

Connectors

1 Dioptre Adjustment Control ................. ੬ pg. 14

w DC IN Jack ............................................ ੬ pg. 9

2 Lens Cover Open/Close Ring................ ੬ pg. 16

The connectors e to y are located beneath the

cover.

3 Video Light Switch

[LIGHT OFF/AUTO/ON]...................... ੬ pg. 28

e Video Output Connector ...................... ੬ pg. 48

4 Snapshot Button [SNAPSHOT] ....... ੬ pg. 20, 24

r Audio Output Connector ..................... ੬ pg. 48

5 •Power Zoom Lever [T/W] .................. ੬ pg. 26

t J Terminal [JLIP (Joint Level Interface Protocol)

•Speaker Volume Control [VOL.] ........ ੬ pg. 45

Connector]

•Connect the editing cable when performing

Random Assemble Editing (੬ pg. 60 – 63).

•It is used to connect the camcorder to a device

such as a personal computer.

For further details consult your nearest JVC

dealer.

•JLIP-controlled editing from camcorder to VCR

is not possible if the VCR is not equipped with a

J terminal.

6 Picture Stabilizer Button

[P.STABILIZER]..................................... ੬ pg. 27

7 Programme AE Button [P.AE] ................ ੬ pg. 30

8 Fade/Wipe Button [EFFECT] ................. ੬ pg. 29

9 System Select Switch

[D.S.C./VIDEO] ................ ੬ pg. 16, 20, 44, 50

0 •Rewind Button

[

2, REW/PAGE–] ...................... ੬ pg. 44, 50

y Digital Connector ............................... ੬ pg. 51

•Retake Rewind Button [RETAKE R]..... ੬ pg. 27

•Quick Review Button [ R] ............. ੬ pg. 27

Indicators

! •Fast-Forward Button

[3, FF/PAGE+] .......................... ੬ pg. 44, 50

u Tally Lamp ........................................... ੬ pg. 16

i Power Lamp ........................................ ੬ pg. 16

•Retake Forward Button [RETAKE F] .... ੬ pg. 27

@ Stop Button [5, STOP] ......................... ੬ pg. 44

# Play/Pause Button

Other Parts

[4/6, PLAY/PAUSE]............................. ੬ pg. 44

o Battery Pack Mount ............................... ੬ pg. 8

p Viewfinder ........................................... ੬ pg. 14

Q Grip Strap ............................................ ੬ pg. 14

$ •Select Dial [+, –, PUSH] .............. ੬ pg. 11, 34

•Bright Dial [BRIGHT] ........................ ੬ pg. 19

% MENU/DISPLAY Button ................. ੬ pg. 17, 34

W •Camera sensor

^ •Counter Reset/Memory Button

Be careful not to cover this area; a sensor

necessary for shooting is built-in here.

•Remote sensor .................................. ੬ pg. 59

[COUNTER R/M] .............................. ੬ pg. 46

•Recording Mode Button [SP/LP] ......... ੬ pg. 12

& EJECT Switch ....................................... ੬ pg. 13

* Recording Start/Stop Button.................. ੬ pg. 16

( Power Switch .................... ੬ pg. 16, 20, 44, 50

E Video Light .......................................... ੬ pg. 28

R Microphone......................................... ੬ pg. 66

T Eyepiece .............................................. ੬ pg. 78

Y Speaker ............................................... ੬ pg. 45

U LCD Monitor ....................................... ੬ pg. 19

I Shoulder Strap Eyelets .......................... ੬ pg. 15

O Clock Battery Slot ................................ ੬ pg. 10

P Tripod Mounting Socket ....................... ੬ pg. 15

) Battery Release Switch

[BATTERY RELEASE] .............................. ੬ pg. 8

q PUSH Button ....................................... ੬ pg. 13

INDEX Indications

2 3

30MIN

S T45

REC SP

FINE 12

)

FADER

(

NORM

LENS COVER

PAUSE

20X

INDEX

15S

TAPE END

MERRY CHRISTMAS

25. 12. 99

BRIGHT

22 50 00

EN73

1 Cassette Warning/

% Battery Pack Remaining Power Indicator

Tape Remaining Time .......................... ੬ pg. 17

Changes as follows according to the battery

pack’s remaining power level:

When no cassette is inserted: the cassette (

warning blinks.

When the Erase Protection tab is not in the

position that allows recording: the cassette (

warning lights. Otherwise, the tape remaining

time is displayed and the tape remaining time

warning blinks when the tape is about to reach

its end.

When the Power Switch is set to “PLAY” and a

tape is loaded: the cassette (

)

“

”. When the power is

almost gone, the indicator “ ” blinks (battery

power warning), then the unit shuts off. Replace

the battery pack with a fully charged one.

Note: The symbol containing 3 darkened squares —

— does not necessarily mean that the battery

pack is fully charged.

)

^ Focus Indicator.................................... ੬ pg. 38

& Exposure Control Level Counter ........... ੬ pg. 37

* White Balance Mode Indicator ............ ੬ pg. 40

) mark is

displayed regardless of the Erase Protection tab’s

position.

( •Record–Standby Mode Indicator ....... ੬ pg. 16

2 Recording Mode (SP/LP) Indicator ........ ੬ pg. 12

•Lens Cover Warning:

3,8 Programme AE Indicator ................. ੬ pg. 30

Displayed at 3 for approx. 2 seconds when

Programme AE with special effects is switched

from one mode to another by pressing P.AE., then

only the indicator remains at 8.

3,9 Fade/Wipe-Standby Indicator .......... ੬ pg. 29

Displayed at 3 for approx. 2 seconds when the

Fade/Wipe is switched from one effect to another

by pressing EFFECT, then only the indicator

remains at 9.

LENS COVER .................................... ੬ pg. 17

) Clock Battery Warning

Blinks for approx. 10 seconds when the power is

turned on. This display also blinks when the clock

(lithium) battery is either not installed or has

discharged. Install or replace the old battery with

a new one (੬ pg. 10).

q •Tape End Display: TAPE END ............ ੬ pg. 17

Appears when the end of the tape is reached

during playback, recording or fast-forward.

•Condensation Warning:

4 •Picture Mode Display ................. ੬ pg. 21, 22

•Remaining Number Of Shots

When this indication appears, all functions

except tape eject and power on/off are disabled.

Turn the unit off (without removing the power

source) for a few hours, and when you turn it on

again the indication should disappear.

•Head Clog Warning:

Appears if dirty heads are detected during

recording. In such a case, use the optional

Cleaning Cassette. If, after using it, the problems

still exist, consult your nearest JVC dealer.

Indicator ..................................... ੬ pg. 21, 22

5 Tape Length Indicator .......................... ੬ pg. 12

6 Zoom Indicator Bar ............................. ੬ pg. 26

Zoom Level Indicator

Approximate Zoom Ratio

7 Recording Indicator ............................. ੬ pg. 16

0 Picture Stabilizer Indicator ................... ੬ pg. 27

! Interval Timer/Recording Time

Indicator ....................................... ੬ pg. 42, 59

@ Instant Title Display ............................. ੬ pg. 33

# Date/Time Display ............................... ੬ pg. 32

$ •Bright Level Indicator ........................ ੬ pg. 45

•Speaker Volume Indicator ................. ੬ pg. 45

INDEX Terms

AC Power Adapter/Charger .............................. pg. 8

Animation Recording ................................pg. 43, 59

Audio Dubbing ............................................. pg. 66

Auto Date Record .......................................... pg. 32

Auto Focus .................................................... pg. 38

Auto Shut Off ...........................................pg. 17, 44

Fade-In/Out ................................................... pg. 29

Fast-Forward Tape ......................................... pg. 44

FINE Mode .................................................... pg. 22

Full Image ................................................pg. 21, 25

Grip Adjustment ............................................ pg. 14

Battery Pack ...............................................pg. 8, 77

Brighten The LCD Monitor ............................. pg. 19

High Speed Shutter Mode .............................. pg. 31

INDEX Menu ................................................. pg. 54

Index Mode ................................................... pg. 54

Index Number ............................................... pg. 54

Insert Editing.............................................pg. 64, 65

Instant Titles .................................................. pg. 33

Interface Shooting .......................................... pg. 19

Car Battery ...................................................... pg. 9

Cassette Adapter ............................................ pg. 47

Charge Marker................................................. pg. 9

Charging The Battery Pack ............................... pg. 8

Clean The Camcorder .................................... pg. 76

Clock (Lithium) Battery .................................. pg. 10

COM Port (RS-232C) ..................................... pg. 51

Connection To A VCR/TV .............................. pg. 48

Connection To A Windows PC/Macintosh ...... pg. 51

Contents ................................................. Cover page

Counter Memory ........................................... pg. 46

JLIP ID NO. ................................................... pg. 36

Journalistic Shooting ...................................... pg. 19

JPEG.............................................................. pg. 22

LCD monitor/Viewfinder, Indications.........pg. 72, 73

Load A Tape .................................................. pg. 13

Darken The LCD Monitor .............................. pg. 19

Date/Time Display ......................................... pg. 32

Date/Time Settings .......................................... pg. 11

DELETE Menu ............................................... pg. 56

Delete Mode ................................................. pg. 56

Delete Select Menu ....................................... pg. 56

Demonstration Mode ..................................... pg. 36

Digital Zoom ................................................. pg. 35

Digital Still Camera................................. pg. 20 – 23

Dioptre Adjustment ....................................... pg. 14

Discharge The Battery Pack ............................. pg. 8

Manual Focus................................................ pg. 39

Menu Screen ...................................... pg. 35, 36, 53

Modem Port .................................................. pg. 51

Move The Page Back ..................................... pg. 50

Move The Page Next ..................................... pg. 50

ND Effect Mode............................................. pg. 31

Nega/Posi Mode ............................................ pg. 31

Electronic Fog Filter Mode ............................. pg. 31

Erase Protection ............................................. pg. 13

Exposure Control ........................................... pg. 37

EN75

Padlock Mark ................................................ pg. 55

Picture Mode Setting...................................... pg. 22

Picture Stabilizer ........................................... pg. 27

Pin-Up Image ...........................................pg. 21, 25

Playback (D.S.C.)........................................... pg. 50

Playback (VIDEO).......................................... pg. 44

Power Switch Position ................................... pg. 16

Printer Port .................................................... pg. 51

Program AE With Special Effects ...............pg. 30, 31

PROTECT Menu ............................................ pg. 55

Protect Mode ................................................. pg. 55

Provided Accessories ....................................... pg. 5

Tally .............................................................. pg. 36

Tape Counter ................................................. pg. 44

Tape Dubbing...........................................pg. 48, 49

Tape Length Setting ........................................ pg. 12

Tele Macro .................................................... pg. 36

Time-Lapse Shooting ................................pg. 43, 59

Tracking ........................................................ pg. 45

Tripod Mounting ............................................ pg. 15

Twilight Mode ............................................... pg. 31

Unload A Tape .............................................. pg. 13

Video Light .................................................... pg. 28

Quick Review ............................................... pg. 27

White Balance Adjustment............................. pg. 40

Wide Mode ................................................... pg. 35

Wipe-In/Out .................................................. pg. 29

Recording, Advanced Features (VIDEO) ... pg. 29 – 43

Recording, Start/Stop (VIDEO) ...................pg. 16, 17

Recording Mode ............................................ pg. 12

Record-Standby ............................................. pg. 16

Remote Control ............................................. pg. 58

Retake ........................................................... pg. 27

Rewind The Tape ........................................... pg. 44

Zooming ....................................................... pg. 26

Self-Recording ............................................... pg. 19

Self-Timer .................................................pg. 42, 59

Sepia Mode ................................................... pg. 31

Shooting,

Advanced Features (D.S.C.) ............ pg. 30, 35 – 42

Shooting (D.S.C.) .................................... pg. 20 – 23

Shoulder Strap Attachment............................. pg. 15

Shuttle Search................................................ pg. 46

Slide Show Mode .......................................... pg. 53

Snapshot Mode ........................................pg. 20, 24

Snapshot (VIDEO).....................................pg. 24, 25

Specifications ................................................ pg. 80

Sports Mode .................................................. pg. 31

STANDARD Mode......................................... pg. 22

Star Mark On The Setting Menus ......... pg. 54, 55, 57

Still Image Data Transfer ................................ pg. 51

Still Playback ................................................. pg. 46

Store A Still Image In The Built-In Memory ..... pg. 20

Super LoLux (S.LX) ......................................... pg. 35

USER MAINTENANCE

LENS COVER Open/Close Ring

After Use

Set the Power Switch to “POWER OFF” to turn off

1 _{the camcorder.}

Open the LCD monitor to an angle of over 60

2 _{degrees. Slide EJECT to open the cassette holder, then}

remove the cassette.

Close and lock the cassette holder by pressing PUSH.

Close and lock the LCD monitor.

BATTERY RELEASE

Set to “POWER OFF”.

Slide BATTERY RELEASE to remove the battery pack.

Turn the LENS COVER Open/Close Ring to close

6 _{the lens cover.}

Cleaning The Camcorder

CLEAN EXTERIOR

1 _{Wipe gently with a soft cloth.}

Remove.

•Put cloth in diluted mild soap and wring it well to

wipe off heavy dirt, then wipe again with a dry

cloth.

PUSH

EJECT

CLEAN LCD MONITOR

2 _{Open the LCD monitor and wipe it gently with a soft}

cloth. Be careful not to damage the monitor. Close

the LCD monitor.

CLEAN LENS

3 _{Blow it with a blower brush, then wipe it gently with}

lens cleaning paper.

REMOVE EYEPIECE

4 _{Turn the eyepiece counterclockwise and pull it out.}

CLEAN VIEWFINDER

5 _{Remove dust using a blower brush.}

RE-ATTACH EYEPIECE

6 _{Re-attach the eyepiece and turn it clockwise.}

NOTES:

● Avoid using strong cleaning agents such as benzine or alcohol.

● Cleaning should be done only after the battery pack has been removed or other power units have been

disconnected.

● Mould may form if the lens is left dirty.

● When using a cleaner or chemically treated cloth, refer to the cautions that came with it.

● When removing the eyepiece, be sure to hold the viewfinder securely.

CAUTIONS

EN77

DANGER:

Video Light

•The video light becomes extremely hot. Do not

touch it either while in operation or soon after

turning it off, otherwise serious injury may result.

•Do not place the camcorder into the carrying case

immediately after using the video light, since it

remains extremely hot for some time.

•When operating, keep a distance of about 30 cm

between the video light and people or object.

•Do not use near flammable or explosive materials.

•It is recommended that you consult your nearest

JVC dealer for replacing the video light.

Battery Packs

The battery packs are nickel-cadmium

or nickel metal-hydride batteries.

Before using the supplied battery pack

or an optional battery pack, be sure to

read the following cautions:

1.To avoid hazard . . .

... do not burn.

Terminals

... do not short-circuit the terminals.

... do not modify or disassemble.

... use only specified chargers.

2. To prevent damage and prolong service life . . .

... do not subject to unnecessary shock.

... avoid repeated charging without fully discharg-

ing.

... charge in an environment where temperatures

are within the tolerances shown in the chart

below. This is a chemical reaction type

battery—cooler temperatures impede chemical

reaction, while warmer temperatures can

prevent complete charging.

... store in a cool, dry place. Extended exposure to

high temperatures will increase natural

discharge and shorten service life.

... avoid prolonged uncharged storage.

... remove from charger or powered unit when

not in use, as some machines use current even

when switched off.

General Battery Precautions

•When the C-P6U or C-P7U (cassette adapter) is not

functioning even when correctly operated, the

battery is exhausted. Replace it with a fresh one.

•Use only the following battery:

C-P6U or C-P7U..................... R6 (AA) size

Please make note of the following rules for battery

use. When misused, battery can leak or explode.

1. Refer to the C-P6U/C-P7U instructions when

replacing the battery.

2. Do not expose the battery to excessive heat as it

can leak or explode.

3. Do not dispose of battery in a fire.

4. Remove battery from the unit if it is to be stored for

an extended period to avoid battery leakage which

can cause malfunctions.

NOTES:

●It is normal for the battery pack to be warm after

charging, or after use.

Temperature Range Specifications

Charging .............................. 10°C to 35°C

Operation ............................ 0°C to 40°C

Storage ................................ –10°C to 30°C

●Recharging time is based on room temperature of

20°C.

●The lower the temperature, the longer recharging

takes.

Cassettes

Main Unit

To properly use and store your cassettes, be sure to

read the following cautions:

1.For safety, DO NOT . . .

... open the camcorder’s chassis.

... disassemble or modify the unit.

... short-circuit the terminals of the battery pack.

Keep it away from metallic objects when not in

use.

... allow inflammables, water or metallic objects

to enter the unit.

... remove the battery pack or disconnect the

power supply while the power is on.

... leave the battery pack attached when the

camcorder is not in use.

1.During use . . .

... make sure the cassette bears the VHS-C mark.

... be aware that recording onto prerecorded tapes

automatically erases the previously recorded

video and audio signals.

... make sure the cassette is positioned properly

when inserting.

... do not load and unload the cassette

repeatedly without allowing the tape to run at

all. This slackens the tape and can result in

damage.

2.Avoid using the unit . . .

... in places subject to excessive humidity or dust.

... in places subject to soot or steam such as near

a cooking stove.

... do not open the front tape cover. This exposes

the tape to fingerprints and dust.

2.Store cassettes . . .

... in places subject to excessive shock or

vibration.

... near a television set.

... near appliances generating strong magnetic or

electric fields (speakers, broadcasting antennas,

etc.).

... in places subject to extremely high (over 40°C )

or extremely low (under 0°C) temperatures.

... away from heaters or other heat sources.

... out of direct sunlight.

... where they won’t be subject to unnecessary

shock or vibration.

... where they won’t be exposed to strong

magnetic fields (such as those generated by

motors, transformers or magnets).

... vertically, in their original cases.

3.DO NOT leave the unit . . .

... in places of over 50°C.

... in places where humidity is extremely low.

(below 35%) or extremely high (above 80%).

... in direct sunlight.

... in a closed car in summer.

... near a heater.

4.To protect the unit, DO NOT . . .

... allow it to become wet.

... drop the unit or strike it against hard objects.

... subject it to shock or excessive vibration during

transportation.

... keep the lens directed at extremely bright

objects for long periods.

... direct the eyepiece of the viewfinder at the sun.

... carry it by holding the viewfinder or the LCD

monitor. Be sure to hold the main unit with

both hands or use the grip.

... swing it excessively when using the shoulder

strap.

EN79

SPECIAL NOTES ON VIDEO HEADS

LCD Monitor

Dust and dirt on video heads

1.To prevent damage to the LCD monitor, DO

NOT . . .

1. Always allow enough time for your camcorder to

acclimatize to its environment before using it.

2. Do not use the unit in areas of high humidity.

(Typical areas of high humidity are given below.)

•From being used or stored in a very cold outdoor

situation, then immediately being used in a

warm indoor situation.

... push it strongly or apply any shocks.

... place the camcorder with the LCD monitor on

the bottom.

2.To prolong service life . . .

... avoid rubbing it with coarse cloth.

3.Be aware of the following phenomena for

LCD monitor use. These are not malfunc-

tions . . .

•While using the camcorder, the surface around the

LCD monitor and/or the back of the LCD monitor

may heat up.

•From being used or stored in a cool air-

conditioned situation, then being used in a high-

humidity outdoor situation.

•Other areas where rapid large temperature

changes can occur.

3. Taking care of your “C” format video cassette tapes.

•Store the video cassette tapes in a vertical

position, complete in their cassette cases.

•During transportation, always store cassettes in

their cassette cases.

•If you leave power on for a long time, the surface

around the LCD monitor becomes hot.

4. Check recorded information at regular intervals.

If the camcorder is equipped with a quick review

facility, use this facility to check whether the

picture is clear or not.

How to handle a CD-ROM

•Take care not to soil or scratch the mirror surface

(opposite to the printed surface). Do not write

anything or put a sticker on either the front or back

surface. If the CD-ROM gets dirty, gently wipe it

with a soft cloth outward from the centre hole using

a circular motion.

If the quick review or playback picture is not clear,

then the video heads may be dirty.

NOTE:

As a maladjusted tracking control can give similar

symptoms to dirty video heads, please check that the

tracking control of the unit is in the centre position.

•Do not use conventional disc cleaners or cleaning

spray.

•Do not bend the CD-ROM or touch its mirror

surface.

•Do not store your CD-ROM in a dusty, hot or

humid environment. Keep it away from direct

sunlight.

Cleaning the video heads

Accumulation of dirt and other particles on the video

heads may cause the playback picture to become

blurred or interrupted. Although this camcorder is

equipped with a built-in head cleaner which automati-

cally cleans the heads, reducing the likelihood of dirty

heads, if such troubles are encountered, we recom-

mend the use of the cleaning cassette specifically

designed for JVC camcorders, model number TCC-2U.

Please use the cleaning cassette as indicated below:

About moisture condensation . . .

● You may have observed that pouring a cold

liquid into a glass will cause drops of water to

form on the glass’ outer surface. This same

phenomenon occurs on the head drum of a

camcorder when it is moved from a cool place

to a warm place, after heating a cold room,

under extremely humid conditions or in a

place directly subjected to the cool air from an

air conditioner.

1 After inserting the cleaning cassette, activate the

Play mode for a maximum of 15 seconds

(normally, 5 seconds is sufficient).

2 Remove the cleaning cassette and check the play-

back picture with a previously good-recorded tape.

3 If the picture is clear, then recording on a new

tape can begin when desired.

4 If the picture is not clear, repeat steps 1 to 3 up to

two more times.

● Moisture on the head drum can cause severe

damage to the video tape, and can lead to

internal damage to the camcorder itself.

5 If the picture is still unclear, consult your local

JVC dealer.

Important Note:

If heads have become dirty, the associated tape will also

be damaged, please do not use the tape again.

● A built-in head cleaner automatically cleans the video

heads and head drum whenever a cassette is loaded

and unloaded to reduce head clogging.

● Cleaning cassette TCC-2U is available from your JVC

local dealer.

Serious malfunctioning

If malfunctioning occurs, stop using the unit

immediately and consult your local JVC dealer.

SPECIFICATIONS

Camcorder

General

Format

: VHS PAL standard

: DC 6.0 V

Operating temperature: 0°C to 40°C

Operating humidity : 35% to 80%

Storage temperature : –20°C to 50°C

Power source

Power consumption

LCD monitor off,

viewfinder on

LCD monitor on,

viewfinder off

LCD monitor on,

viewfinder on

Video light

Weight

Dimensions

: Approx. 890 g

: 6.5 W

: 7.0 W

: 99 (W) x 119 (H) x 198 (D) mm

(with the LCD monitor closed

and with the viewfinder fully

tilted downward)

: 7.6 W

: 2.9 W

: PAL-type

Pickup

Lens

: 1/4” format CCD

: F1.6, f = 3.9 to 62.4 mm, 16:1

power zoom lens with auto iris

and macro control, filter

diameter 40.5 mm

Signal system

Video recording system

Luminance

: FM recording

: Converted sub-carrier

direct recording

Viewfinder

: Electronic viewfinder

with 0.5” black/white CRT

Colour

White balance

adjustment

LCD monitor

Conforms to VHS standard

: Auto/Manual adjustment

: 2.5” diagonally measured, LCD

panel/TFT active matrix system

: Monaural

Cassette

Tape speed

cassette

: 23.39 mm/sec.

: 11.70 mm/sec.

Speaker

Recording time (max.)

Connectors

JLIP

: 60 minutes

: 120 minutes

(with EC-60 cassette)

: ø3.5 mm, 4-pole, mini-head

jack

(compatible with RC-5325 plug)

: 1 Vp-p, 75 Ω unbalanced,

analogue output

(via Video output connector)

: –8 dBs, 1 kΩ analogue output

(via Audio output connector)

: ø2.5 mm, 4-pole, mini-head

jack

D.S.C. format

Recording format

Video

: Digital data storage (based on

JPEG)

Recording medium : Built-in flash memory,

Audio

2 Mbyte

Number of storable

shots

Digital

: FINE mode:

approx. 30 shots

STANDARD mode:

approx. 60 shots

: 640 x 480 pixels

Image size

Provided Accessories ..................

pg. 5

AC Power Adapter/Charger AA-V15EK

੬

Power requirement

: AC 110 V to 240 V`,

50/60 Hz

Optional Accessories

Power consumption : 23 W

•Battery Packs BN-V12U, BN-V20U, BN-V856U

•Car Battery Charger BH-V3E

Output

Charge

VTR

: DC 8.5 V

: DC 6.3 V

, 1.3 A

, 1.8 A

•Compact VHS-C (

) Cassettes EC-60/45/30

•Active Carrying Bag CB-V7U

•Remote Control Unit RM-V700U

Charging system

: Constant current, peak

detection, timer controlled

: 140 (W) x 42 (H) x 68 (D) mm

: Approx. 350 g

Dimensions

Weight

Some accessories are not available in some areas. Please

consult your nearest JVC dealer for details on accessories

and their availability.

Cassette Adapter C-P7U

Specifications shown are for SP mode unless otherwise

indicated.

E & O.E. Design and specifications subject to change

without notice.

Dimensions

Weight

Accessory

: 188 (W) x 25 (H) x 104 (D) mm

: Approx. 240 g

: “R6 (AA)”-size battery x 1

MEMO

EN81

MEMO

VICTOR COMPANY OF JAPAN, LIMITED

⁰^P⁴^ri⁹ⁿ⁹^te^F^d^Oⁱ^Vⁿ*^Ja^U^p^N^a*^{n VP}

Aiwa CDC X517M User Manual
Blaupunkt CASABLANCA CD52 7 642 295 310 User Manual
Burnham ALP080 User Manual
Clarion APX4360 User Manual
Crown Boiler BWF128 User Manual
Dicota Hypertec N16408NHY User Manual
Duracell MX1400 User Manual
Franklin Industries, L L C FCW20T User Manual
Hitachi VM 2700A User Manual
Imperial Range 36BR 126 User Manual