JVC GR DV 3 User Manual

CONTENTS  
ABOUT DV  
PROVIDED ACCESSORIES  
GETTING STARTED  
5
6
8
Charging The Battery Pack..................... 8  
Installing The Battery Pack .................... 9  
Indoor Use ..................................... 10  
Using The Battery Holder .................... 10  
Date/Time Settings ........................... 11  
Loading/Unloading A Cassette .............. 12  
Recording Mode Setting ...................... 13  
Grip Strap Attachment........................ 14  
Tripod Mounting ............................... 15  
Dioptre Adjustment ........................... 15  
Remote Control Unit .......................... 16  
Operation Mode ............................... 17  
DIGITAL VIDEO CAMERA  
GR-DV3  
Please visit our CyberCam Homepage on  
the World Wide Web and answer our  
Consumer Survey (in English only):  
RECORDING  
18  
Basic Recording ................................ 18  
Advanced Features ............................ 23  
PLAYBACK  
46  
Basic Playback ................................. 46  
Advanced Features ............................ 48  
Basic Connections ............................. 52  
Advanced Connections ........................ 56  
EDITING  
58  
Dubbing ......................................... 58  
Digital Dubbing ................................ 59  
Brand Setting .................................. 60  
Random Assemble Editing .................... 61  
For More Accurate Editing .................... 64  
Audio Dubbing ................................. 66  
TROUBLESHOOTING  
AFTER USE  
68  
73  
CONTROLS, INDICATIONS  
AND CONNECTORS  
74  
Camcorder ...................................... 74  
AC Charger Station............................ 76  
Indications During Recording ................ 77  
Indications During Playback ................. 78  
Warning Indications ........................... 79  
CAUTIONS  
80  
82  
84  
85  
INSTRUCTIONS  
SPECIFICATIONS  
GLOSSARY OF TERMS  
INDEX  
LYT0193-001B  
EN  
3
CAUTION (applies to the AC Charger Station):  
SOME DO’S AND  
TO REDUCE THE RISK OF FIRE, DO NOT  
REMOVE COVER (OR BACK). NO USER–  
SERVICEABLE PARTS INSIDE. REFER SERVIC-  
ING TO QUALIFIED SERVICE PERSONNEL.  
DON’TS ON THE SAFE  
USE OF EQUIPMENT  
This equipment has been designed and manufac-  
tured to meet international safety standards but,  
like any electrical equipment, care must be taken if  
you are to obtain the best results and safety is to be  
assured.  
NOTES:  
The rating plate (serial number plate) and  
safety caution are on the bottom and/or the  
back of the main unit.  
The rating plate (serial number plate) of the  
AC Charger Station is on its bottom.  
DO  
read the operating instructions before you  
attempt to use the equipment.  
DO  
ensure that all electrical connections (including  
the mains plug, extension leads and intercon-  
nections between pieces of equipment) are  
properly made and in accordance with the  
manufacturer’s instructions. Switch off and  
withdraw the mains plug when making or  
changing connections.  
This camcorder is designed to be used with  
PAL-type colour television signals. It cannot be  
used for playback with a television of a different  
standard. However, live recording and  
viewfinder playback are possible anywhere.  
Use the BN-V607U or BN-V615U battery pack  
and, to recharge it, the provided multi-voltage  
AC Charger Station AA-V60EK. (An appropriate  
conversion adapter may be necessary to  
accommodate different designs of AC outlets in  
different countries.)  
DO  
DO  
consult your dealer if you are ever in doubt  
about the installation, operation or safety of  
your equipment.  
be careful with glass panels or doors on  
equipment.  
DON’T continue to operate the equipment if you are in  
any doubt about it working normally, or if it is  
damaged in any way — switch off, withdraw  
the mains plug and consult your dealer.  
DON’T remove any fixed cover as this may expose  
dangerous voltages.  
DON’T leave equipment switched on when it is  
unattended unless it is specifically stated that it  
is designed for unattended operation or has a  
standby mode. Switch off using the switch on  
the equipment and make sure that your family  
knows how to do this. Special arrangements  
may need to be made for infirm or handi-  
capped people.  
This unit is produced to comply with Standard  
IEC Publ. 65.  
DON’T use equipment such as personal stereos or  
radios so that you are distracted from the  
requirements of road safety. It is illegal to watch  
television whilst driving.  
DON’T listen to headphones at high volume, as such  
use can permanently damage your hearing.  
DON’T obstruct the ventilation of the equipment, for  
example with curtains or soft furnishings.  
Overheating will cause damage and shorten the  
life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with  
wood screws — to ensure complete safety  
always fit the manufacturer’s approved stand or  
legs with the fixings provided according to the  
instructions.  
This camcorder is designed exclusively for  
the  
digital video cassette. Only  
cassettes marked  
unit.  
can be used with this  
Before recording an important scene . . .  
.... make sure you only use cassettes with the Mini  
DV mark.  
.... remember that this camcorder is not compatible  
with other digital video formats.  
.... remember that the this camcorder is intended  
for private consumer use only. Any commercial  
use without proper permission is prohibited.  
(Even if you record an event such as a show,  
performance or exhibition for personal  
enjoyment, it is strongly recommended that you  
obtain permission beforehand.)  
DON’T allow electrical equipment to be exposed to  
rain or moisture.  
ABOVE ALL  
— NEVER let anyone especially children push anything  
into holes, slots or any other opening in the case —  
this could result in a fatal electrical shock;  
— NEVER guess or take chances with electrical  
equipment of any kind — it is better to be safe than  
sorry!  
4
EN  
About Batteries  
DANGER! Do not attempt to take the batteries  
apart, or expose them to flame or excessive heat, as  
there is a risk of fire or explosion.  
SAFETY PRECAUTIONS  
Do not point the lens or the viewfinder directly into  
the sun. This can cause eye injuries, as well as lead  
to the malfunctioning of internal circuitry. There is  
also a risk of fire or electric shock.  
WARNING! Do not allow the battery terminals, or  
the battery itself, to come in contact with metals, as  
this can result in a short circuit and possibly start a  
fire.  
CAUTION! The following notes concern possible  
physical damage to the camcorder and to the user.  
The Benefits Of Lithium-Ion Batteries  
When carrying, be sure to always attach and use  
the provided hand strap. Hold the camcorder firmly  
in your hand, with the strap securely around your  
wrist. Carrying or holding the camcorder by the  
viewfinder can result in dropping the unit, or in a  
malfunction.  
Lithium-ion battery packs are small but possess a  
large power capacity. However, when the battery  
pack becomes cool in an environment subject to  
cold temperatures (below 10°C), the battery pack  
has a characteristic that its usage time becomes  
shorter and may cease to function. If this happens,  
place the battery pack in your pocket or other  
warm, protected place for a short time, then re-  
attach it to the camcorder. As long as the battery  
pack itself is not cold, it should not affect perform-  
ance.  
Take care not to get your finger caught in the  
cassette cover. Do not let children operate the  
camcorder, as they are particularly susceptible to  
this type of injury.  
(If you’re using some kind of heating pad, make  
sure the battery pack does not come in direct  
contact with the pad.)  
Do not use a tripod on unsteady or unlevel surfaces.  
It could tip over, causing serious damage to the  
camcorder.  
CAUTION! Attaching the camcorder to the AC  
Charger Station, connecting cables (AUDIO/VIDEO,  
S-VIDEO, Editing, DC) and leaving the unit on top  
of the TV is not recommended, as tripping on the  
cables will cause the camcorder to fall, resulting in  
damage.  
Lithium-ion is vulnerable in colder temperatures.  
ABOUT DV  
EN  
5
The digital video camera converts incoming audio and video signals into digital form for recording.  
A video signal is composed of a luminance signal (Y) and colour signals (R-Y and B-Y). These signals are  
identified and recorded digitally (Digital Component Recording). The A/D (Analogue to Digital) converter  
samples the Y signal at 13.5 MHz, and R-Y and B-Y at 6.75 MHz, and changes them to an 8-bit quantum signal.  
Sound sampled at 48 kHz is changed to a 16-bit quantum signal, and sound sampled at 32 kHz is converted  
to a 12-bit signal.  
NOTE:  
The data recorded on a tape is digital, but the output of the this camcorder is analogue.  
VIDEO  
Luminance Signal (Y)  
A/D  
Recording by  
rotating head  
helical scan  
Lens  
conversion  
Colour Difference  
Signal (R-Y/B-Y)  
Chrominance (C)  
Chromatic  
Analysis  
A/D  
conversion  
Signal  
compression  
AUDIO  
Mic  
A/D  
conversion  
This camcorder separates the data into blocks, writing one block of each data type on each track of the tape.  
Tape direction  
Sub-Code Area  
Video Area  
Audio Area  
ITI Area  
Head tracking direction  
12 tracks/frame  
1 Sub-Code Area  
3 Audio Area  
The Time Code and Date/Time data are  
written here, separate from the video  
data. This enables you to display the date  
and time during playback, even if they  
weren’t displayed while recording.  
The digital audio signal is recorded here.  
4 ITI (Insert and Tracking  
Information) Area  
Insert editing and post-recording editing  
tracking signals are recorded here.  
2 Video Area  
The digital video signal is recorded here.  
PROVIDED ACCESSORIES  
6
EN  
AC Charger Station  
AA-V60EK  
DC cord  
Grip/Hand strap  
Battery pack BN-V607U  
VIDEO/AUDIO cable  
(AC Charger Station to TV or VCR,  
RCA plug 4 RCA plug)  
VIDEO/AUDIO cable  
(camcorder to TV or VCR,  
ø3.5 mini-plug 4 RCA plug)  
S-VIDEO cable  
Editing cable  
(ø3.5 mini-plug, 2 poles)  
EN  
7
T
W
Remote control unit  
RM-V712U  
MiniDV Cassette Tape 30 min  
(DVM-30) M-DV30ME  
Cable adapter  
Lithium battery CR2025  
(for remote control unit)  
GETTING STARTED  
8
EN  
Charging The Battery Pack  
The battery pack has not been charged at the factory. Before using it, be sure to charge it with the AC  
Charger Station.  
ATTACH  
DETACH  
Battery pack BN-V607U  
To AC outlet  
Power cord  
Power cord  
AC Charger Station  
AA-V60EK  
Charger indicator  
Power lamp  
DC OUT jack  
NOTES:  
SUPPLY POWER TO CHARGER  
1 Plug the AC Charger Station’s power cord in to  
an AC outlet. The power lamp comes on.  
If you connect the camcorder’s DC cord to the AC  
Charger Station during battery charging, power is  
supplied to the camcorder and charging stops  
(pg. 10).  
ATTACH BATTERY  
2
Attach while making sure the  
marks are  
When using the AC Charger Station, be sure to  
use the supplied power cord only.  
When charging the Battery Pack for the first time  
or after a long storage period, the Charger  
Indicator may not light. In this case, remove the  
Battery Pack from the AC Charger Station, then try  
charging again.  
Since the AC Charger Station processes electricity  
internally, it becomes warm during use. Be sure to  
use it only in well-ventilated areas.  
If the battery operation time remains extremely  
short even after having been fully charged, the  
battery is worn out and needs to be replaced.  
Please purchase a new one.  
facing down and aligned with the correspond-  
ing marks on the AC Charger Station.  
The Charger Indicator begins blinking to  
indicate charging has started.  
CONFIRM STATUS  
3 When the charger indicator stops blinking but  
stays lit, charging is finished.  
DETACH BATTERY  
4 Slide the battery in the direction of the arrow  
and lift off.  
Remember to unplug the AC Charger  
Stations power cord from an AC outlet.  
INFORMATION:  
The AC Charger Station (provided) enables you  
to charge not only one battery pack but also  
one battery pack installed in the camcorder  
(pg. 53).  
Battery  
Approximate charging time  
BN-V607U  
90 min.  
BN-V615U  
(optional)  
180 min.  
EN  
9
Charging Environment  
Perform charging where the temperature is between 10° and 30°C. 20° to 25°C is the ideal temperature range  
for charging. If the environment is too cold, charging may be incomplete.  
Continuous Shooting  
Continuous shooting is possible (See table below for recording time) under the following conditions:  
The temperature is approximately 20°C  
However, . . .  
If the temperature is below 10°C, or  
If zoom or Record-Standby is engaged repeatedly, continuous shooting capability is reduced significantly.  
Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the  
planned shooting time.  
Approximate recording  
No. of batteries to supply power  
time (unit: min)  
Using one battery (BN-V607U) installed in the camcorder  
60  
Using one battery (BN-V615U) installed in the optional Battery Holder  
(CU-V615U) attached to the camcorder  
120  
BN-V607U x 2  
120  
180  
420  
Using two batteries; one (BN-V607U) installed in the  
camcorder and one (BN-V607U or BN-V615U)  
installed in the optional Battery Holder (CU-V615U)  
BN-V607U &  
attached to the camcorder  
BN-V615U  
Using a BN-V856U battery*  
* The BN-V856U battery, as well as the AA-V80EK AC Power Adapter/Charger for charging it, is included in  
the optional VU-V856KIT Extended-Use Battery Pack Kit.  
Installing The Battery Pack  
The battery pack has not been charged at the factory. Before installing it in the camcorder, be sure to charge  
it with the AC Charger Station (pg. 8). It is also possible to charge the battery pack installed in the  
camcorder (pg. 53).  
OPEN BATTERY COVER  
1 Slide down the open switch.  
INSERT CHARGED BATTERY  
Open switch  
(BATTERY)  
2 Insert the  
mark end of the battery first.  
Inserting the battery backwards will result in  
malfunction.  
CLOSE BATTERY COVER  
3
NOTES:  
To remove the battery pack, turn off the  
camcorder and open the battery cover so that the  
battery pack comes out halfway. Then pull out the  
battery pack.  
Be careful not to drop the battery pack.  
Battery cover  
Battery  
GETTING STARTED (Cont.)  
10  
EN  
Indoor Use  
When using the camcorder indoors, you can use the AC Charger Station (provided) instead of a battery.  
Slide down the open switch.  
Power lamp  
When power is supplied,  
the power lamp lights.  
To AC outlet  
Remove.  
Power cord  
To DC OUT jack  
Coupler  
Core filter  
AC Charger Station  
AA-V60EK  
DC cord  
CONNECT DC CORD TO CAMCORDER  
Insert the coupler of the provided DC cord into  
the camcorder.  
SUPPLY POWER TO AC CHARGER  
1
3 STATION  
Plug the AC Charger Station’s power cord into  
an AC outlet.  
CONNECT DC CORD TO AC  
2 CHARGER STATION  
NOTE:  
Connect the DC cord to the AC Charger  
Station’s DC OUT jack.  
Since the AC Charger Station processes electricity  
internally, it becomes warm during use. Be sure to use  
it only in well-ventilated areas.  
Using The Battery Holder  
For extended use, prepare the Battery Holder (CU-V615U), which can be loaded with one battery pack. This  
Battery Holder can be used together with the battery installed in the camcorder.  
INSERT CHARGED BATTERY  
1
2
To insert a battery pack, slide the battery lock  
switch to the release position and insert the  
battery  
end first. To prevent the battery  
pack from falling out, be sure to slide the  
battery lock switch to the lock position.  
ATTACH TO CAMCORDER  
Insert the Battery Holder’s nub into the  
mounting socket on the bottom of the  
camcorder and slide the camcorder lock lever  
to the lock position.  
Camcorder  
connector  
Nub  
To detach the camcorder, press the release  
button on the lock lever and slide the lock  
lever to the release position. Then slide the  
battery lock switch to the release position.  
Mark  
NOTES:  
Camcorder lock lever  
(with release button)  
When the battery remaining power indicator appears  
as  
, that means the battery power is close to nil.  
When the battery power is exhausted, power turns  
off automatically.  
Battery lock switch  
Battery  
Each time you start shooting, the camcorder chooses  
the battery pack that has more remaining power, and  
uses that as the power supply. That means both  
battery packs will be exhausted at roughly the same  
time.  
EN  
11  
Date/Time Settings  
Date and time will automatically be recorded on tape at all times. It is your choice to display it or not during  
playback (pg. 51).  
Display  
Lock button  
REC MODE  
WIDE MODE  
ZOOM  
SP  
Power lamp  
OFF  
40X  
ON  
DIS  
GAIN UP  
TO DATE / TIME MENU  
TO SYSTEM MENU  
AGC  
4
M
END  
Power Dial  
Recording Menu  
ON SCREEN  
DISPLAY  
DATE / TIME  
OFF  
ON  
1 . 1 . 00  
0 : 00  
Select Dial  
4
MENU button  
RETURN  
Date/Time Menu  
Regarding Built-in Rechargeable Battery  
SELECT OPERATION MODE  
To store the date/time in memory, a rechargeable  
clock lithium battery is integrated in the camcorder.  
While the camcorder is connected to an AC outlet  
using the AC Charger Station, or while the battery  
pack installed in the camcorder continues to supply  
power to the camcorder, the clock lithium battery is  
always charged. However, if the camcorder is not  
used for approx. 3 months, the clock lithium battery  
will become discharged and the date/time stored in  
memory will be lost. When this occurs, first connect  
the camcorder to an AC outlet using the AC Charger  
Station etc. for over 24 hours to charge the clock  
lithium battery. Then perform the date/time setting  
before using the camcorder.  
1 Set the Power Dial to “  
M
” while pressing down  
the lock button located on the dial, and pull  
out the viewfinder fully.  
•The power lamp comes on and the  
camcorder is turned on.  
ACCESS RECORDING MENU  
2 Press MENU. The Recording Menu appears.  
ACCESS DATE/TIME MENU  
3 Move the pointer and highlight bar to “TO  
DATE/TIME MENU” by rotating the Select Dial.  
Press the Select Dial and the Date/Time Menu  
appears.  
It is also possible to use the camcorder without the  
date/time setting.  
INPUT DATE AND TIME  
4 Move the pointer and highlight bar to “DATE/  
TIME” by rotating the Select Dial. Press the  
Select Dial and “day” is highlighted and begins  
blinking.  
NOTE:  
If you don’t exit the Date/Time Menu, the clock  
display will not move but the camcorder’s internal  
clock continues to operate. Once you close the  
menu, the date and time begin operation from the  
current date and time, with no delay or loss.  
Rotating the Select Dial, input the day. Press  
the Select Dial. Repeat the procedure to input  
the month, year, hour and minute.  
Press the Select Dial twice when the pointer  
and highlight bar are set to “RETURN” to exit.  
GETTING STARTED (Cont.)  
12  
EN  
Loading/Unloading A Cassette  
The camcorder needs to be powered up to load or eject a cassette.  
OPEN/EJECT  
switch  
Cassette holder  
Cassette cover  
PUSH HERE  
Make sure the window  
side is facing out.  
Erase protection switch**  
NOTES:  
OPEN CASSETTE COVER  
It takes a few seconds for the cassette holder to  
open. Do not apply force.  
1 Turn the power on, then slide the OPEN/EJECT  
switch in the direction of the arrow. The  
cassette cover releases. Open the cover in the  
direction of the arrow until it locks. The holder  
opens automatically.  
If you wait a few seconds and the cassette holder  
does not open, close the cassette cover and try  
again.  
When the camcorder is suddenly moved from a  
cold place to a warm environment, wait a short  
time before opening the cover.  
Closing the cassette cover before the cassette  
holder comes out may cause damage to the  
camcorder.  
Even when the camcorder is switched off, a  
cassette can be loaded or unloaded. After the  
cassette holder is closed with the camcorder  
switched off, however, it may not recede. It is  
recommended to turn the power on before  
loading or unloading.  
When shooting again after already shooting a  
scene, a blank portion is recorded on the tape or  
a previously recorded scene is erased (recorded  
over) if you open the cassette cover, regardless of  
whether the cassette holder comes out or not. See  
page 20 for information about recording from the  
middle of a tape.  
Do not touch internal components.  
INSERT/REMOVE TAPE  
2 Insert or remove a tape and press “PUSH  
HERE” to close the cassette holder.  
Once the cassette holder is closed, it recedes  
automatically. Wait until it recedes  
completely before closing the cassette cover.  
When the batterys charge is low, you may  
not be able to close the cover. Do not apply  
force. Replace the battery with a fully  
charged one before continuing.  
Approximate recording time  
Recording mode  
Tape  
SP  
LP  
DVM-30  
DVM-60  
30 min.  
60 min.  
45 min.  
90 min.  
** To protect valuable recordings . . .  
.... slide the erase protection switch on the back of  
the tape in the direction of “SAVE”. This  
prevents this tape from being recorded over. If  
you decide later that you do want to record on  
this tape, slide the switch back to “REC” before  
loading the tape.  
EN  
13  
Recording Mode Setting  
Set depending on your preference.  
Display  
Lock button  
Power lamp  
Recording Menu  
4
REC MODE  
SP  
WIDE MODE  
ZOOM  
OFF  
40X  
ON  
DIS  
M
GAIN UP  
AGC  
TO DATE / TIME MENU  
TO SYSTEM MENU  
END  
Power dial  
4
REC MODE  
WIDE MODE  
ZOOM  
SP  
OFF  
40X  
ON  
MENU button  
Select Dial  
DIS  
GAIN UP  
AGC  
TO DATE / TIME MENU  
TO SYSTEM MENU  
Recording mode indicator  
SP  
SP  
LP  
END  
NOTES:  
SELECT OPERATION MODE  
If the recording mode is switched during  
1 Set the Power Dial to “  
M
” while pressing down  
recording, the playback picture will be blurred at  
the switching point.  
the lock button located on the dial.  
PULL OUT VIEWFINDER  
Pull out the viewfinder fully.  
The power lamp comes on and the camcorder  
is turned on.  
It is recommended that tapes recorded in the LP  
mode on this camcorder be played back on this  
camcorder.  
During playback of a tape recorded on another  
camcorder, blocks of noise may appear or there  
may be momentary pauses in the sound.  
2
ACCESS RECORDING MENU  
3 Press MENU. The Recording Menu appears.  
SET RECORDING MODE  
4 First move the pointer and highlight bar to  
“REC MODE” by rotating the Select Dial. Press  
the Select Dial and the parameter “SP” or “LP”  
is highlighted. Select “SP” or “LP” by rotating  
the Select Dial. Press the Select Dial twice to  
exit from the Recording Menu.  
•“LP” (Long Play) is more economical,  
providing 1.5 times the recording time.  
•Audio Dubbing is impossible on a tape  
recorded in the LP mode.  
GETTING STARTED (Cont.)  
14  
EN  
Grip Strap Attachment  
Pad  
START/STOP  
Grip Strap  
Pad  
3
Sub hand strap eyelet  
Bottom of  
camcorder  
1
Length adjuster  
2
Hand strap eyelet  
Loop  
ATTACH GRIP STRAP TO HAND  
1 STRAP EYELET  
ATTACH GRIP STRAP TO SUB  
2 HAND STRAP EYELET  
Open the pad and pull the grip strap in the  
direction of the arrow to remove the grip strap  
from the pad.  
Open the pad and thread the grip strap through  
the pad. Next, thread the end of the grip strap  
through the sub hand strap eyelet.  
Thread the end of the grip strap through the  
hand strap eyelet, then thread the other end of  
the grip through the loop. Pull firmly to ensure  
secure attachment.  
ADJUST LENGTH  
3
Adjust so that your thumb and fingers can  
easily operate the START/STOP button and the  
zoom switch 1. Position the pad so that it  
contacts the back of your hand and thread the  
grip strap through the length adjuster 2, then  
re-attach the pad 3.  
To use the strap as a hand strap, thread the  
strap through the length adjuster when  
attaching it to the camcorder.  
EN  
15  
Tripod Mounting  
Align the tripod’s screw with the mounting socket  
on the bottom of the camcorder.  
Bottom of  
camcorder  
Dioptre Adjustment  
Adjust the viewfinder display for best viewing.  
Display  
Diopter adjust lever  
PAUSE  
SELECT OPERATION MODE  
ADJUST DIOPTRE  
1 Set the Power Dial to “  
2
A
M
3 Slide the Dioptre Adjust Lever located on the  
” or “ ”.  
bottom of the viewfinder.  
TURN ON CAMCORDER  
Pull out the viewfinder fully.  
•Slide in either direction, while looking at the  
viewfinder display, until it looks best to you.  
GETTING STARTED (Cont.)  
16  
EN  
Remote Control Unit  
You can use the RM-V712U to control the camcorder. When using the remote control, be sure to point it at  
the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam  
may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or  
powerful lighting.  
START/STOP Button (pg. 18)  
PAUSE IN connector (pg. 61)  
Zoom Buttons (pg. 48)  
AUDIO MONITOR Button  
(pg. 51)  
DISPLAY Button  
(pg. 58)  
T
W
SHIFT Button (pg. 48)  
MBR SET Button (pg. 60)  
SLOW Rewind/Forward  
Buttons (pg. 47)  
Down Button (pg. 48)  
Left/Right Buttons  
(pg. 48)  
A.DUB Button (pg. 66)  
FADE/WIPE Button  
(pg. 61)  
Up Button (pg. 48)  
EFFECT Button  
(pg. 49)  
Operation Buttons  
(pg. 48, 58)  
EFFECT ON/OFF Button  
(pg. 49)  
R.A. EDIT Buttons (pg. 61 – 63)  
Installing The Battery  
The RM-V712U uses one lithium battery (CR2025).  
PULL OUT BATTERY HOLDER  
1
2
Pull out in the direction of the arrow while  
pressing the knob as shown.  
INSERT BATTERY IN HOLDER  
Insert the battery in the holder, and be sure to  
have the “+” mark visible.  
RE-INSERT HOLDER  
3 Slide the holder back in until you hear a click.  
•Read the warning concerning lithium  
Knob  
batteries (pg. 2).  
EN  
17  
Operation Mode  
Tuning the Power Dial allows you to choose the appropriate operation mode among the following modes:  
A
M
Full Auto mode ( ), Manual mode ( ), 5 second mode recording (5S), Self-Timer mode ( ) and “PLAY”.  
According to the Power Dial position you have selected, “F.AUTO”  
or “MANUAL” appears in the upper left corner.  
A
M
When set to “  
When set to “ ”, “5S” or “  
F . AUTO  
MANUAL  
PAUSE  
PAUSE  
To turn on the camcorder, first turn  
the Power Dial to any operation mode  
except “OFF”, then pull out the  
viewfinder fully. When turning the  
Power Dial from “OFF” to any other  
position, press and hold the lock  
button located on the dial.  
Lock button  
Power lamp  
Power Dial Position  
Function  
Allows you to record using NO special effects or manual adjustments.  
Suitable for standard recording.  
A
Full Auto:  
Allows you to set various recording functions using the Menus. If you want  
more creative capabilities than Full Auto recording, try this mode.  
M
Manual:  
Allows you to record in 5-second clips to keep the action moving.  
Other menu settings are the same as Full Auto mode, however manually  
adjusted White Balance Adjustment settings are effective.  
5 second mode  
recording: 5S  
Allows you (camcorder operator) to become part of the scene once the  
camcorder is set. This mode is similar to the Self-Timer on film cameras.  
Self-Timer:  
Playback: PLAY  
OFF  
Allows you to play back a recording, pg. 46 – 57.  
Allows you to switch off the camcorder. After setting to this position, Manual  
Focus and Exposure Control are automatically reset to “AUTO”.  
RECORDING Basic Recording  
18  
EN  
A
You should already have performed the necessary preparations (pg. 8 – 17). Set the Power Dial to “  
and try recording that way before attempting to use more advanced features.  
NOTE:  
Before starting recording, make sure you set the date and time (pg. 11). Even if they don’t appear during  
recording, you can display them during playback (pg. 51).  
Display  
Lock button  
REC  
444  
Power lamp  
M
Power Dial  
During recording  
START/STOP button  
PAUSE  
Select  
Dial  
IND.ON/OFF  
button  
Record-Standby  
Tally lamp  
Camera sensor  
SELECT OPERATION MODE  
END RECORDING  
1 Set the Power Dial to “  
A
5 When you’re finished recording, push back the  
viewfinder; the lens cover closes and the  
power lamp goes out.  
” while pressing down  
the lock button located on the dial.  
PULL OUT VIEWFINDER  
2
Pull out the viewfinder fully.  
•When transporting, make sure the viewfinder  
is pushed back.  
To turn power on again, pull out the  
viewfinder.  
•The lens cover opens, the power lamp comes  
on and the scene you’re aimed at appears.  
The Record-Standby mode is engaged.  
OR  
Set the Power Dial to “OFF”.  
START RECORDING  
3 When “PAUSE” appears, press START/STOP. A  
beep signals the start of recording and the tally  
lamp comes on.  
•When turning to “OFF”, it is not necessary to  
press down the lock button.  
STOP RECORDING  
4
Press START/STOP again to stop recording.  
The camcorder re-enters Record-Standby  
mode.  
EN  
19  
NOTES:  
Tape Remaining Indicator  
Be careful not to cover the camera sensor; built-in  
here is the sensor necessary for shooting.  
If 5 minutes elapse in the Record-Standby mode,  
power shuts off automatically to conserve energy  
and protect the heads. To turn the camcorder on  
again, push back and pull out the viewfinder  
again. As long as you don’t take out the tape you  
were using or play it back, you can continue from  
where you left off with no noticeable break on the  
recorded video.  
The time remaining on the tape is automatically  
monitored and displayed (pg. 77). When the  
tape ends, “TAPE END” appears. If the indications  
are turned off, the tape remaining indicator appears  
when remaining time reaches 2 minutes.  
Display  
90 min  
REC  
When a blank portion is left between recorded  
scenes on the tape, the time code is interrupted  
and errors may occur when editing the tape.  
Continue recording from where you stop so there  
are no gaps by following “Recording from the  
middle of a tape” (pg. 20).  
Record-Standby means that a tape is loaded and  
the camcorder is ready to record.  
During recording, sound is not heard from the  
speaker. If you want to hear the sound, connect  
optional headphones to the headphones jack. The  
sound volume at this point is the same as the level  
it was adjusted during playback.  
2 min  
3 min  
89 min  
To make the indications disappear, press and hold  
the IND.ON/OFF button for more than approx. 1  
second. However, it is impossible to remove the  
tape running indicator 444” and warning  
indications and so on (pg. 79).  
blinking  
1 min  
0 min  
When the battery remaining power indicator  
appears as  
, that means the battery power is  
blinking  
blinking  
close to nil. When the battery power is exhausted,  
power turns off automatically.  
Viewfinder Indications  
You can make the Viewfinder indications appear/  
disappear.  
Brightness Control  
You can adjust the brightness of the display by  
rotating the Select Dial.  
PRESS IND.ON/OFF BUTTON  
1
When you do not want the indications to  
appear, press the IND.ON/OFF button for  
longer than approximately 1 second. Certain  
indications disappear.  
– – – – –6– – – – –  
BRIGHT  
Press again for longer than approx. 1 second to  
make the indicaitons reappear.  
NOTE:  
ADJUST BRIGHTNESS  
1 Rotate the Select Dial until the brightness  
indicator moves and the display reaches its  
appropriate brightness.  
It is impossible to make the tape running indicator  
and warnings etc. disappear from the viewfinder.  
For the indications that can be removed, pg. 77.  
•The brightness indication appears on the  
display.  
RECORDING Basic Recording (Cont.)  
20  
EN  
Recording From The Middle Of A Tape  
When removing a tape on which you were recording, or when you resume recording on a tape after playing  
back the recording previously made (without taking the tape out between recordings), perform this proce-  
dure.  
Power Dial  
Stop button  
Play/Pause button  
Rewind button  
Fast-forward  
button  
Power lamp  
Lock button  
START/STOP button  
SELECT OPERATION MODE  
START RECORDING  
1 Turn the Power Dial to “PLAY” while pressing 5 Turn the Power Dial to any operation mode  
down the lock button located on the dial.  
•The power lamp comes on.  
except “PLAY” and “OFF”, then press START/  
STOP.  
•Start recording from a point prior to the end  
of the last recording. A few seconds of the  
end of the last recording will be erased.  
PULL OUT VIEWFINDER  
2 Pull out the viewfinder fully.  
START SEARCH  
NOTE:  
3 Press 6/  
4, then press  
2
or 3. Watch in the  
Even if you start recording from the end of the  
previous recording leaving no blank space, there  
may be situations where a clean transition is not  
possible.  
viewfinder for the spot where you want to  
begin recording.  
ENGAGE STILL MODE  
4 Once you find the spot at which you want to  
start recording, press 6/4 twice to engage the  
Still mode.  
EN  
21  
Time Code  
During recording, a time code is recorded on the tape. This code is to confirm the location of the  
recorded scene on the tape during playback.  
If recording starts from a blank portion, the time code begins counting from “00:00:00”  
(minute:second:frame). If recording starts from the end of a previously recorded scene, the time code  
continues from the last time code number.  
To perform Random Assemble Editing (pg. 61), time code is necessary. If during recording a blank  
portion is recorded partway through the tape, the time code is interrupted. When recording is resumed,  
the time code starts counting up again from “00:00:00”. This means the camcorder may record the same  
time codes as those existing in a previously recorded scene. To prevent leaving a blank portion on a  
tape, perform the procedure in “Recording From The Middle of A Tape” (pg. 20) in the following  
cases;  
•After playing back the recorded tape, when  
Display  
you shoot again.  
Time code is displayed  
during playback.  
•When power shuts off during shooting.  
•When a tape is removed and re-inserted  
during shooting.  
Minutes  
•When shooting using a partially recorded tape.  
•When shooting on a blank portion located  
partway through the tape.  
Seconds  
•When shooting again after already shooting a  
scene and opening/closing the cassette cover.  
Frames  
(25 frames = 1 second)  
TC 12 : 34 : 24  
NOTES:  
The Time Code cannot be reset.  
During fast-forwarding and rewinding, time code indication does not move smoothly.  
When blank portion is recorded on a tape  
Time code  
00:00:00  
Time code  
05:43:21  
Time code  
00:00:00  
Tape  
Already recorded scene  
Blank  
Newly recorded scene  
Shooting start point  
Shooting stop point  
Shooting start point  
Proper recording  
Time code  
00:00:00  
Time code  
05:43:21  
Time code  
05:44:00  
Tape  
Already recorded scene  
New scene  
Latest scene  
Shooting start point  
Shooting start point  
Shooting start point  
RECORDING Basic Recording (Cont.)  
22  
EN  
Zoom  
Select any one of the three powers of magnification and get “closer” to the subject (pg. 30).  
Simply set the zoom switch to either zoom in (towards “T”) or zoom out (towards “W”). The zoom speed is  
variable — the quicker you set the zoom switch, the quicker the zoom action.  
NOTES:  
A
In Full Auto mode (when the Power Dial is set to “ ”), zoom magnification of up to 40X is possible. In  
M
Manual mode (when the Power Dial is set to “ ”), zooming is possible to a maximum of 100X.  
Zoom magnification of over 10X is done through Digital image processing, and is therefore called Digital  
Zoom.  
During Digital Zoom, the quality of image may suffer.  
Digital zoom cannot be used while functions done through Digital image processing (5SD mode,  
pg. 24, Picture Wipe/Dissolve function, pg. 35, Snapshot, pg. 26, etc.) are activated.  
Macro shooting (as close as approx. 5 cm to the subject) is possible when the zoom switch is set all the  
way to “W”.  
Zoom in (T: Telephoto)  
D
T
D
T
D
T
D
T
W
W
W
W
Zoom out (W: Wide angle)  
D
T
Digital zoom  
zone  
Zoom switch  
W
10X (optical)  
zoom zone  
Zoom display  
RECORDING Advanced Features  
Displaying The Date And Time During Recording  
EN  
23  
M
When the Power Dial is set to “ ”, “5S” or “ ”, you can choose whether to display the date and time  
during recording or not. You must first set the date and time (see “Date/Time Settings” pg. 11). Set  
“DISPLAY” to “ON” in the Date/Time Menu. The Date/Time is always displayed when the Power Dial is set  
A
to “ ”.  
Display  
Lock button  
REC MODE  
WIDE MODE  
ZOOM  
SP  
OFF  
40X  
ON  
DIS  
GAIN UP  
TO DATE / TIME MENU  
TO SYSTEM MENU  
AGC  
4
M
END  
Power Dial  
Recording Menu  
ON SCREEN  
DISPLAY  
DATE / TIME  
OFF  
ON  
1 . 1 . 00  
0 : 00  
Select Dial  
MENU button/  
IND.ON/OFF button  
4
RETURN  
Date/Time Menu  
SELECT OPERATION MODE  
SET FUNCTION PARAMETERS  
5 Cycle through the available settings of the  
selected functions by rotating the Select Dial  
and stop when the one you want is displayed.  
Then press it and the pointer and highlight bar  
automatically move to “RETURN”.  
1 First turn the Power Dial to “  
M
” while pressing  
down the lock button located on the dial,  
make sure the viewfinder is pulled out.  
ACCESS RECORDING MENU  
2 Press MENU. The Recording Menu appears.  
CLOSE RECORDING MENU  
6 Press the Select Dial twice. Selection is  
complete and the menu disappears.  
NOTES:  
ACCESS DATE/TIME MENU  
3
Move the pointer and highlight bar to “TO  
DATE/TIME MENU” by rotating the Select Dial.  
Press it and the Date/Time Menu appears.  
Connect the camcorder to a TV and set “ON  
SCREEN” to “ON” in the Date/Time Menu. The  
display appears on the connected TV .  
The Indicator/Display function overrides these  
settings. Even if you have set “ON SCREEN” to  
“ON”, pressing the IND.ON/OFF button for  
longer than 1 second removes the indications  
from the screen. Pressing it for longer than 1  
second again makes the indications re-appear.  
SELECT FUNCTION  
4
Move the pointer and highlight bar to  
“DISPLAY” by rotating the Select Dial, then  
press it. The pointer stops blinking, indicating  
that the function has been selected.  
RECORDING Advanced Features (Cont.)  
24  
EN  
Scene (5-second recording)  
Record a vacation or an important event in 5-second clips to keep the action moving. The 5-Second  
function may also be activated during Full Auto operation. But the White Balance remains in the previously  
adjusted condition. While the 5-Second mode is activated, Fade/Wipe (pg. 33), P.AE/Effects (pg. 39)  
and other manual operations cannot be performed.  
Display  
Lock button  
MANUAL  
REC  
444  
5S  
START/STOP button  
Power Dial  
5S MODE  
Dissolves during 5 second mode recording  
Select “5SD” at the System Menu (pg. 32).  
After 5 sec.  
MANUAL  
“5SD MODE” appears in step 2 below.  
Record one 5-second clip, and the image at  
the end of the clip is stored. If you record the  
next clip within 5 minutes, the previous  
scene dissolves as the new scene appears.  
PAUSE  
5S MODE  
•If you turn the power off, the stored image  
will be lost.  
Record-Standby  
SELECT OPERATION MODE  
END 5-SECOND MODE RECORDING  
1 Turn the Power Dial to “5S” while pressing 4 Set the Power Dial to the “  
A
M
”, “ ” or “OFF”  
down the lock button located on the dial.  
position.  
PULL OUT VIEWFINDER  
Pull out the viewfinder fully. “5S MODE”  
appears.  
To Take A Snapshot In The 5-Second Mode . . .  
.... instead of pressing START/STOP in step 3, press  
SNAPSHOT. The camcorder records a 6-second  
still (pg. 26). When “SCENE” is set to  
“ANIM.” (pg. 32), this function is not  
available.  
2
ENGAGE 5S MODE  
3 Then press START/STOP. The tally lamp lights  
and beep sounds to indicate the start of  
recording, and after 5 seconds the camcorder  
enters Record-Standby mode.  
NOTE:  
When “SCENE” is set to “ANIM.” in the System  
Menu, the 5-second recording function is not  
available. Animation recording of a 1/8-second clip  
is taken instead (pg. 32).  
If you press and hold START/STOP within  
5 seconds after recording starts, Record-  
Standby mode is not engaged.  
EN  
25  
Self-Timer  
Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way  
adding the final touch to a memorable picture.  
Display  
Lock button  
MANUAL  
– – –  
Power lamp  
PAUSE  
Self-Timer indication  
Power Dial  
After 15 sec.  
START/STOP button  
MANUAL  
REC  
444  
When the START/STOP button is pressed,  
the tally lamp changes as shown below:  
During recording  
Begins blinking  
(Self-Timer starts)  
Blinks quickly  
(Self-Timer shooting  
starts soon)  
Stops blinking  
and stays on  
(Self-Timer  
¥
¥
4
shooting starts)  
After approx. 15 sec.  
SELECT OPERATION MODE  
END SELF-TIMER RECORDING  
1 Turn the Power Dial to “  
5 Set the Power Dial to the “  
A
M
” while pressing  
”, “ ” or “OFF”  
down the lock button located on the dial.  
position.  
PULL OUT VIEWFINDER  
Pull out the viewfinder fully. The Self-Timer  
indication appears.  
•When turning to “OFF”, it is not necessary to  
2
press down the lock button.  
To Take A Snapshot In The Self-Timer Mode . . .  
.... in step 3, press SNAPSHOT instead of  
START/STOP. After 15 seconds, a 6-second still  
is recorded. After that, the camcorder enters the  
Record-Standby mode.  
•The camcorder enters the Record-Standby  
mode.  
ENGAGE SELF-TIMER MODE  
3 Press START/STOP.  
After 15 seconds, the beep sounds and  
recording begins.  
STOP SELF-TIMER RECORDING  
4 Press START/STOP.  
•The camcorder re-enters Record-Standby  
mode.  
RECORDING Advanced Features (Cont.)  
26  
EN  
Snapshot  
Use your camcorder like a regular camera and take a snapshot, or several of them in succession.  
Display  
REC MODE  
WIDE MODE  
ZOOM  
SP  
PHOTO MODE  
SCENE  
BEEP / TALLY  
WIND CUT  
SOUND MODE 32kHz  
ID NUMBER  
FRAME  
5S  
OFF  
40X  
ON  
ON  
PHOTO  
DIS  
OFF  
GAIN UP  
TO DATE / TIME MENU  
TO SYSTEM MENU  
AGC  
06  
OFF  
4
DEMO. MODE  
END  
4
RETURN  
During snapshot  
Recording Menu  
System Menu  
SNAPSHOT button  
Lock button  
Power Dial  
M
Select Dial  
MENU buton  
SELECT OPERATION MODE  
SELECT SNAPSHOT MODE  
1 First turn the Power Dial to “  
M
4 Move the pointer and highlight bar to “PHOTO  
MODE” by rotating the Select Dial. Press it and  
choose the appropriate mode among the five  
Snapshot modes (pg. 27) by rotating it. Stop  
when the one you want is displayed and press  
it again. The pointer and highlight bar  
” while pressing  
down the lock button located on the dial.  
Make sure the viewfinder is pulled out.  
ACCESS RECORDING MENU  
2
3
Press MENU. The Recording Menu appears.  
automatically move to “RETURN”. Press the  
Select Dial twice. Selection is complete and  
the menu disappears.  
ACCESS SYSTEM MENU  
Move the pointer and highlight bar to “TO  
SYSTEM MENU” by rotating the Select Dial.  
Press it and the System Menu appears.  
TAKE SNAPSHOT  
5
Press the SNAPSHOT Button.  
If you press during Record-Standby . . .  
.... “PHOTO” appears and a still image will be  
recorded for approx. 6 seconds, then the  
camcorder re-enters the Record-Standby  
mode.  
If you press during Recording . . .  
.... “PHOTO” appears and a still image will be  
recorded for approx. 6 seconds, then the  
normal recording resumes.  
EN  
27  
FULL*  
(Snapshot mode  
with no frame)  
FRAME*  
(Snapshot mode  
with frame)  
PIN-UP  
(Pin-Up mode)  
MULTI 4  
(Multi-Analyzer 4)  
MULTI 9  
(Multi-Analyzer 9)  
* : There is a momentary camera shutter-type blackout.  
Motor Drive mode:  
NOTES:  
Keeping the SNAPSHOT Button pressed provides an  
effect similar to serial photography. (The interval  
between the still pictures: approx. 0.7 seconds.)  
In Full Auto mode, all Snapshot modes are  
available. However, the Snapshot mode cannot  
be changed.  
During playback as well, all Snapshot modes are  
available.  
However, during playback, “MULTI 4” and  
“MULTI 9” are not available when the  
“MONOTONE” or “SEPIA” playback effect  
(pg. 49) is selected.  
The Snapshot mode (except FULL mode) is not  
possible while Digital Zoom (zoom magnification  
of over 10X, pg. 30) is activated.  
If certain P.AE/Effects (pg. 40) are activated,  
some Snapshot modes cannot be used. If you  
select a Snapshot mode that is unusable in the  
current situation, the “PHOTO” indication blinks  
when you press the SNAPSHOT button.  
RECORDING Advanced Features (Cont.)  
28  
EN  
Menus  
The Recording Menu allows you to set these functions:  
Recording Mode, Wide Mode, Zoom Magnification, Digital Image Stabilizer, Gain Up, Date/Time Menu,  
System Menu. The following selection procedure applies to Recording Mode, Wide Mode, Zoom Magnifica-  
tion, Stabilization and Gain Up.  
Please refer to pages 29, 30 for details.  
Display  
Lock button  
4
REC MODE  
WIDE MODE  
ZOOM  
SP  
OFF  
40X  
ON  
DIS  
GAIN UP  
TO DATE / TIME MENU  
TO SYSTEM MENU  
AGC  
M
END  
Power Dial  
Recording Menu  
REC MODE  
WIDE MODE  
ZOOM  
SP  
OFF  
40X  
ON  
DIS  
Select Dial  
GAIN UP  
AGC  
TO DATE / TIME MENU  
TO SYSTEM MENU  
MENU button  
4
END  
SELECT OPERATION MODE  
SET FUNCTION PARAMETERS  
4 Cycle the available settings of the selected  
function by rotating the Select Dial. Stop when  
the one you need is displayed. Then press it,  
and the pointer and highlight bar automatically  
move to “END”.  
1 First turn the Power Dial to “  
M
” while pressing  
down the lock button located on the dial,  
make sure the viewfinder is pulled out.  
ACCESS RECORDING MENU  
2 Press MENU. The Recording Menu appears.  
To set the parameters for a different function,  
repeat steps 3 and 4.  
SELECT FUNCTION  
3
Move the pointer and highlight bar to the  
desired function by rotating the Select Dial,  
then press it. The pointer stops blinking,  
indicating that the function has been selected.  
CLOSE RECORDING MENU  
5 Press the Select Dial. Selection is complete and  
the menu disappears.  
EN  
29  
SP  
LP  
REC MODE  
WIDE MODE  
ZOOM  
SP  
OFF  
SQUEEZE  
CINEMA  
OFF  
40X  
ON  
DIS  
GAIN UP  
TO DATE / TIME MENU  
TO SYSTEM MENU  
AGC  
10X  
40X  
100X  
ON  
OFF  
AUTO A  
AGC  
OFF  
4
END  
REC MODE (Recording mode)  
You can change the tape recording speed. LP tape speed is slower than SP, allowing LP to record 1.5 times  
longer than SP. If you have shot in SP mode, Audio Dubbing will be possible later.  
NOTES:  
Tapes shot in LP mode are recommended to be played back on this unit. Playback may not be successful  
on other units.  
A
When the Power Dial is set to “ ”, Rec Mode remains as originally selected.  
WIDE MODE  
This recording mode is compatible with wide-screen TVs (16:9 aspect ratio). When using this mode, please  
refer to your wide-screen TV’s instruction manual.  
SQUEEZE  
screen without distortion.  
elongated vertically.  
–For playback on TVs with an aspect ratio of 16:9. Naturally expands the image to fit the  
appears. During playback/recording on 4:3 TVs/viewfinder, the image is  
CINEMA  
–Inserts black bands at the top and bottom of the screen. During playback on wide-screen TVs,  
the black bands at the top and bottom of the screen are cut and the screen ratio becomes 16:9. During  
playback/recording on 4:3 TVs/viewfinder, black bands are inserted at the top and bottom of the screen and  
the image appears like a letterboxed 16:9 movie.  
OFF–Select “OFF” when you don’t want to use either of the above modes.  
NOTES:  
When playing back a tape recorded in Squeeze and Cinema, Squeeze cannot be distinguished from  
Cinema during fast-forward or rewind.  
During Full-Auto operation, both Squeeze and Cinema modes are unusable.  
CONTINUED ON NEXT PAGE  
RECORDING Advanced Features (Cont.)  
30  
EN  
ZOOM (Zoom magnification)  
You can select 10X, 40X, or 100X maximum zoom magnifications.  
10X–Optical zoom that does not degrade the quality of the recording.  
40X–Electronic processing (Digital zoom) that lets you get closer up.  
100X–Electronically-processed images at 100-times magnification.  
NOTES:  
Even if 40X or 100X is selected, Digital Zoom (magnification of over 10X) cannot be used while functions  
done through Digital image processing (5SD mode, pg. 24, Picture Wipe/Dissolve function, pg. 35,  
Snapshot, pg. 26, etc.) are activated.  
During Full-Auto mode, 40X is selected automatically.  
DIS (Digital Image Stabilizer)  
When recording while holding the camcorder in your hand, or when shooting a subject with little or no  
contrast, subtle hand movements will cause shakiness in the recorded image.  
ON –Compensates for relatively small shakes that occur when shooting close up. “ ” appears during  
recording.  
OFF–When shooting with the camcorder in a fixed position or on a tripod, set the Stabilizer to “OFF”.  
If you leave it on and then move or turn the camera to follow a moving subject, unnecessary compensation  
occurs and this can result in an unnatural recorded image.  
NOTES:  
Even if the stabilizer is set to “OFF” in Manual mode, it is automatically set to “ON  
Mode.  
” in Full Auto  
The Stabilizer cannot compensate for drastic hand movements while shooting.  
The Stabilizer will not work if the scene has little or no contrast.  
The “ ” indicator appears blinking if the Stabilizer cannot be used.  
GAIN UP  
Bright, natural recordings can be taken even in areas with low or poor lighting.  
AGC–This is automatically activated during Full Auto mode. The overall appearance is jagged, but the image  
is bright.  
AUTO  
–The shutter speed is automatically adjusted (1/25 — 1/200 sec.). Shooting a subject in low or  
poor lighting at 1/25 sec. shutter speed provides a brighter image than in the AGC mode, but the subject's  
movements are not smooth or natural. When set to this mode, “ ” is displayed.  
OFF–Select this setting when lighting is not a problem. Enables recording of the actual brightness you see.  
A
A
EN  
31  
System Menu  
The System Menu allows you to set the following functions: Photo Mode, Scene, Beep/Tally, Wind Cut,  
Sound Mode, ID numbers and Demonstration Mode (pg. 32).  
Display  
Lock button  
REC MODE  
WIDE MODE  
ZOOM  
SP  
OFF  
40X  
ON  
DIS  
GAIN UP  
AGC  
M
TO DATE / TIME MENU  
TO SYSTEM MENU  
4
END  
Power Dial  
Recording Menu  
PHOTO MODE  
SCENE  
BEEP / TALLY  
WIND CUT  
SOUND MODE 32kHz  
ID NUMBER  
DEMO. MODE  
FRAME  
5S  
ON  
OFF  
Select Dial  
06  
OFF  
MENU button  
4
RETURN  
System Menu  
SELECT OPERATION MODE  
SET FUNCTION PARAMETERS  
1 First turn the Power Dial to “  
M
5 Rotate the Select Dial to cycle through the  
available settings for the selected function, and  
stop when the desired setting appears. Then  
press it, and the pointer and highlight bar  
automatically move to “RETURN”.  
” while pressing  
down the lock button located on the dial,  
make sure the viewfinder is pulled out.  
ACCESS RECORDING MENU  
2
Press MENU. The Recording Menu appears.  
To set the parameters for a different function,  
repeat steps 4 and 5.  
ACCESS SYSTEM MENU  
3 Move the pointer and highlight bar to “TO  
SYSTEM MENU” by rotating the Select Dial,  
then press it. The System Menu appears.  
CLOSE SYSTEM MENU  
6 Press the Select Dial twice. Setting is complete  
and the System Menu disappears.  
SELECT FUNCTION  
4 Move the pointer and highlight bar to the  
desired function by rotating the Select Dial,  
then press it. The pointer stops blinking,  
indicating that the function has been selected.  
RECORDING Advanced Features (Cont.)  
32  
EN  
PIN-UP  
FRAME  
5S  
FULL  
MULTI 4  
MULTI 9  
PHOTO MODE  
SCENE  
BEEP / TALLY  
WIND CUT  
SOUND MODE 32kHz  
ID NUMBER  
DEMO. MODE  
FRAME  
5S  
5SD  
ANIM.  
ON  
OFF  
ON  
OFF  
32kHz  
OFF  
ON  
06  
OFF  
48kHz  
This number is necessary when connecting  
the camcorder to a computer [01 to 99].  
4
RETURN  
OFF  
ON  
PHOTO MODE  
See pages 26 and 27.  
WIND CUT  
When activated, this mode helps cut down on noise  
created by wind.  
SCENE (5-Second Mode) (pg. 24)  
5S–Pressing START/STOP allows you to take a 5-  
ON–When shooting in high winds, set to “ON” to  
reduce noise.  
second “clip”. Press repeatedly for a succession of  
short recordings.  
•“ ” appears.  
The quality of the sound will change. This is normal.  
5SD–If you record a 5-second clip within 5 minutes  
after the previous one, the end of the old scene  
dissolves and is replaced by the new scene over a  
2-second period.  
ANIM. (Animation)–Each time you press START/  
STOP, a 1/8-second recording is taken. By using an  
inanimate object and changing its position between  
shots, you can record the subject as though it’s  
moving.  
OFF–This function is disabled.  
NOTE:  
The Wind Cut mode is disabled during Full Auto  
operation.  
SOUND MODE  
Sound signals can be sampled at 32 kHz or 48 kHz.  
32 kHz–This setting enables recording of stereo  
sound on four separate channels, and is recom-  
mended for use when performing Audio Dubbing.  
48 kHz–This setting enables recording of stereo  
sound on two separate channels.  
Animation is not available in the LP mode. If you  
tried to record in the LP mode after setting ANIM.,  
the recording mode indicator "LP" begins to blink,  
and recording goes on in the SP mode.  
NOTE:  
NOTE:  
During use of SCENE effect, focus (pg. 41) and  
exposure control (pg. 42) enter Full Auto operation.  
A tape recorded at 48 kHz cannot be used for  
Audio Dubbing.  
BEEP/TALLY  
The beep sounds when the power is turned on or  
off, and at the beginning and end of recording.  
Tally lamp lights up during recording.  
ONTo activate the beep and tally lamp.  
OFFTo turn off the beep and tally lamp.  
DEMO. MODE (Demonstration Mode)  
This setting demonstrates certain functions such as  
P.AE/Effects (pg. 40), etc., and can be used to  
confirm how these functions operate. When the  
camcorder is turned off, “DEMO. MODE” is set to  
“OFF”.  
NOTE:  
NOTE:  
A
When the Power Dial is set to “ ”, Beep/Tally  
If a tape is in the camcorder, the Demo mode  
cannot be turned on.  
remains as originally selected.  
EN  
33  
FADE/WIPE Effects  
IMPORTANT:  
If certain P.AE/Effects (pg. 40) are activated, some Fade/Wipe Effects cannot be used. If you select a Fade/  
Wipe Effect that is unusable in the current situation, the indication blinks.  
Use these to spice up the transition from one scene to the next. You can also vary transitions from scene to  
scene. Refer to pages 33 – 38 for Fade/Wipe effects and techniques.  
Select any one effect from the Fader/Wipe Menu.  
Display  
FADER / WIPE  
MANUAL  
W
H
FOCUS  
AUTO  
AUTO  
AUTO  
OFF  
EXPOSURE  
W. BALANCE  
FADER  
P
WIPESHUTTER  
RANDOM  
PAUSE  
?
R
H
4
OFF  
W
/ WIPE  
P. AE  
/ EFFECT  
SEL.  
4
FADERWHITE  
FADERBLACK  
FADERMOSAIC  
FADERB.W  
BK  
OFF  
B W  
RETURN  
Manual Mode Item Menu  
Fader/Wipe Menu  
Lock button  
Power Dial  
Select Dial  
START/STOP  
button  
M
SELECT OPERATION MODE  
•The Fader/Wipe Menu disappears and the  
effect is reserved. The indicator representing  
the selected effect appears.  
M
1 First turn the Power Dial to “  
” while pressing  
down the lock button located on the dial,  
make sure the viewfinder is pulled out.  
START RECORDING  
ACCESS MANUAL MODE ITEM  
5 Press START/STOP to start recording and  
2 MENU  
activate fade- or wipe- in  
Press the Select Dial.  
OR . . .  
ACCESS FADER/WIPE MENU  
3 Move the pointer and highlight bar to “FADER/  
WIPE” by rotating the Select Dial and then  
press it. The Fader/Wipe Menu appears.  
END RECORDING  
Press START/STOP to end recording and  
activate fade- or wipe- out.  
TO CANCEL FADE/WIPE EFFECTS  
6 In step 4, move the pointer and highlight bar to  
“OFF”. Press the Select Dial.  
SELECT EFFECT  
4
Move the pointer and highlight bar to the  
desired effect by rotating the Select Dial, then  
press it.  
RECORDING Advanced Features (Cont.)  
34  
EN  
Fades and Wipes  
A scene gradually appears on a black or white screen (Fade In/Wipe In), or disappears, leaving a black or  
white screen (Fade Out/Wipe Out). Select Fade or Wipe at the Fader/Wipe Menu (pg. 33).  
BK  
Select any one effect from  
W
H
,
,
,
B W  
,
,
,
,
,
and  
of the Fader/Wipe Menu.  
FADE  
Example  
FADER – WHITE  
W
H
Fade In  
Fade Out  
WIPE  
Example  
WIPE – SCROLL  
Wipe In  
M
START/STOP  
button  
Wipe Out  
NOTE:  
ACTIVATE FADE IN OR WIPE IN  
1 Press START/STOP to start recording, and the  
Fade In or Wipe In occurs automatically.  
You can extend the length of a fade or wipe by  
pressing and holding the START/STOP button.  
ACTIVATE FADE OUT OR WIPE OUT  
2 When you want to stop recording the scene,  
press START/STOP. Before the camcorder  
enters the Record-Standby mode, the Fade Out  
or Wipe Out occurs automatically.  
EN  
35  
Picture Wipe/Dissolve  
Combine the Picture Wipe and Dissolve functions for a professional transition effect. There are 6 Picture  
Wipe effects and 1 Dissolve effect. Select the Picture Wipe effect at the Fader/Wipe Menu (pg. 33).  
Select any one effect from  
P
,
P
,
,
,
,
and  
of the Fader/Wipe Menu.  
P
P
P
P
P
Previous scene end  
Example  
WIPE – SCROLL  
P
The next scene gradually wipes in over the  
previous scene.  
Within 5 minutes . . .  
START/STOP  
button  
M
Wipe In  
NOTES:  
START RECORDING  
If the power is turned off after a scene is finished  
recording, the stored point is erased.  
This disables the Picture Wipe/Dissolve  
combination. When this happens, the Picture  
Wipe/Dissolve indicator blinks. Try recording  
again, but don’t turn the power off when you’re  
finished. Please be advised that power also shuts  
off automatically if 5 minutes elapse in the  
Record-Standby mode.  
1 Press START/STOP.  
ENGAGE RECORD-STANDBY MODE  
2 Press START/STOP when one scene is finished.  
The point at which the scene ended is stored in  
memory.  
RESUME RECORDING  
3 If you start recording a new scene within 5  
minutes of the end of the previous recording  
(without having turned the camcorders power  
off), the previous scene wipes out, revealing  
the new scene.  
The sound at the end of the last recorded scene is  
not stored.  
RECORDING Advanced Features (Cont.)  
36  
EN  
Random Variations  
?
R
When  
is selected, the camcorder chooses one of  
W
H
BK  
the fades/wipes at random.  
START RECORDING  
1 Press START/STOP. The camcorder does the  
rest, selecting an effect at random.  
•The recording starts with a Fade In or Wipe  
In. If you press START/STOP during record-  
ing, Record-Standby mode is preceded by a  
Fade Out or Wipe Out; when you resume  
recording, it begins with a Fade In or Wipe  
In.  
NOTE:  
The Picture Wipe/Dissolve feature is not available  
when Random Fader is activated.  
M
START/STOP  
button  
EN  
37  
FADER AND WIPE MENU  
MENU  
EFFECT  
Fade in or out with a white screen.  
FADER — WHITE  
W
H
Fade in or out with a black screen.  
FADER — BLACK  
FADER — MOSAIC  
FADER — B.W  
B
K
Fade in or out with a full-screen mosaic effect.  
Fade in to a colour screen from a black and white screen, or  
fade out from colour to black and white.  
B W  
Wipe in on a black screen from the upper right to the lower left  
corner, or wipe out from lower left to upper right, leaving a black  
screen.  
WIPE — CORNER  
The scene starts in the centre of a black screen and wipes in  
toward the corners, or comes in from the corners, gradually  
wiping out to the centre.  
WIPE — WINDOW  
WIPE — SLIDE  
Wipe in from right to left, or wipe out from left to right.  
Wipe in as the two halves of a black screen open to the left and  
right, revealing the scene, or wipe out and the black screen  
reappears from left and right to cover the scene.  
WIPE — DOOR  
The scene wipes in from the bottom to the top of a black screen,  
or wipes out from top to bottom, leaving a black screen.  
WIPE — SCROLL  
WIPE — SHUTTER  
Wipe in toward the centre of a black screen from the top and  
bottom, or wipe out from the centre toward the top and bottom,  
leaving a black screen.  
CONTINUED ON NEXT PAGE  
RECORDING Advanced Features (Cont.)  
38  
EN  
FADER AND WIPE MENU (cont.)  
MENU  
EFFECT  
The new scene gradually appears as the old one gradually  
disappears.  
DISSOLVE  
P
The new scene wipes in over the previous one from the upper  
right corner to the lower left corner.  
WIPE — CORNER  
P
The next scene gradually wipes in from the centre of the screen  
toward the corners, covering the previous scene.  
WIPE — WINDOW  
P
The next scene gradually wipes in over the previous one from  
right to left.  
WIPE — SLIDE  
P
The previous scene wipes out from the centre to the right and  
left, like a door being pushed open to reveal the next scene.  
WIPE — DOOR  
P
The new scene wipes in over the last one from the bottom of the  
screen to the top.  
WIPE — SCROLL  
P
The new scene wipes in over the previous one from the centre  
toward the top and bottom of the screen.  
WIPE — SHUTTER  
P
When this function is activated, the camcorder randomly selects  
the effect used in scene transition (from the Fade and Wipe  
effects).  
RANDOM  
?
R
EN  
39  
P.AE/Effects  
IMPORTANT:  
If certain Fades or Wipes (pg. 37, 38) are activated, some P.AE/Effects cannot be used. If you select a  
P.AE/Effect that is unusable in the current situation, the effect’s symbol begins flashing.  
You can choose any one of the effects (pg. 40) from the P.AE/Effect Menu.  
Display  
P. AE / EFFECT  
FOCUS  
AUTO  
AUTO  
AUTO  
OFF  
EXPOSURE  
W. BALANCE  
FADER  
1
2
SLOW X4  
SLOW X10  
OFF  
1/50  
PAUSE  
1/50  
1/50  
/ WIPE  
P. AE  
/ EFFECT  
SEL.  
4
SHUTTER  
4
OFF  
1/100 SHUTTER 1/100  
1/250  
1/500  
1/250  
1/500  
SHUTTER  
SHUTTER  
RETURN  
The indicator for the selected  
mode appears, and the  
Manual Mode Item Menu  
P.AE/EFFECT Menu  
selected mode is engaged.  
Select Dial  
Lock button  
Power Dial  
M
SELECT OPERATION MODE  
SELECT EFFECT  
M
1 First turn the Power Dial to “  
4 Move the pointer and highlight bar to the  
desired effect by rotating the Select Dial, then  
press it.  
” while pressing  
down the lock button located on the dial,  
make sure the viewfinder is pulled out.  
ACCESS MANUAL MODE ITEM  
•The P.AE/Effect Menu disappears and the  
selected mode is activated. The symbol of the  
selected mode appears.  
2 MENU  
Press the Select Dial and move the pointer and  
highlight bar to "P.AE/EFFECT" by rotating the  
Select Dial.  
START RECORDING  
5 Press START/STOP. The image begins with the  
selected effect.  
ACCESS P.AE/EFFECT SELECT MENU  
Press the Select Dial. The P.AE/Effect Menu  
appears.  
3
DISABLE P.AE/EFFECT  
6 To turn off the selected effect, re-access the  
P.AE/Effect Menu and move the pointer and  
highlight bar to “OFF” by rotating the Select  
Dial. Then press it.  
NOTE:  
P.AE/Effects can be changed during recording or  
during Record-Standby.  
RECORDING Advanced Features (Cont.)  
40  
EN  
SHUTTER  
(Variable Shutter  
(Speed)  
CLASSIC FILM  
1/50–The shutter speed is fixed at 1/50th of a  
second. Black bands that usually appear when  
shooting a TV screen become narrower.  
1/100–The shutter speed is fixed at 1/100th of a  
second. The flickering that occurs when shooting  
under a fluorescent light or mercury-vapour lamp  
is reduced.  
Gives recorded scenes a strobe effect.  
STROBE  
1/250, 1/500–These settings allow fast-moving  
images to be captured one frame at a time, for  
vivid, stable slow-motion playback. The faster the  
shutter speed, the darker the picture becomes.  
Use the shutter function under good lighting  
conditions.  
Your recording looks like a series of consecutive  
snapshots.  
SLOW (Slow Shutter)  
You can light dark subjects or areas even brighter  
than they would be under good natural lighting.  
TWILIGHT  
SLOW X4  
The Shutter Speed is set to 1/12.5th of a second  
to quadruple the sensitivity.  
Makes evening scenes look more natural.  
White Balance (pg. 44) is initially set to  
but can be changed to your desired setting.  
When Twilight is chosen, the camcorder  
automatically adjusts the focus from approx.  
,
SLOW X10  
10 m to infinity. From less than 10 m, adjust the  
focus manually.  
The Shutter Speed is set to 1/5th of a second to  
provide 10 times the sensitivity.  
SEPIA  
Recorded scenes have a brownish tint like old  
photos. Combine this with the Cinema mode for  
a classic look.  
NOTES:  
When using Slow Shutter, the image takes on a  
strobe-like effect.  
Use Slow Shutter only in dark areas.  
The Manual Focus indication may appear and  
flash when Slow Shutter is in use.  
If the image is out of focus, adjust manually. It  
is also recommended that you use a tripod, if  
possible.  
MONOTONE  
Like classic black and white films, your footage is  
shot in B/W. Used together with the Cinema  
mode, it enhances the “classic film” effect.  
EN  
41  
Manual Focus Adjustment  
The camcorder, in most cases, adjusts the focus from approx. 5 cm to infinity automatically. However, when  
focusing is difficult or when the subject is not in the middle of the viewfinder, adjust the focus manually.  
Factory preset is “AUTO”.  
Display  
Lock button  
4
FOCUS  
MANUAL  
AUTO  
AUTO  
OFF  
EXPOSURE  
W. BALANCE  
FADER  
/ WIPE  
P. AE  
/ EFFECT  
M
OFF  
RETURN  
Power Dial  
Manual Mode  
Item Menu  
FOCUS  
Select Dial  
Focus zone  
(Focus is adjusted at the  
center of the screen)  
Manual focus indicator  
SELECT OPERATION MODE  
END ADJUSTMENT OF FOCUS  
Press the Select Dial. Focus adjustment is  
complete. The indication changes from  
“FOCUS” to “MANUAL”.  
M
1
First turn the Power Dial to “ ” while pressing  
5
down the lock button located on the dial,  
make sure the viewfinder is pulled out.  
•If you want to reset the focus, repeat from  
ACCESS MANUAL MODE ITEM  
step 2.  
2 MENU  
Press the Select Dial. The Manual Mode Item  
Menu appears.  
To Change To Auto Focus . . .  
.... rotate the Select Dial to display “AUTO” then  
press it in step 3. The manual focus indicators  
ACCESS MANUAL FOCUS  
A
disappear. Or set the Power Dial to “ ”.  
3
Move the pointer and highlight bar to “FOCUS”  
by rotating the Select Dial, then press it. Rotate  
the Select Dial to display “MANUAL”, then  
press it. The Manual Mode Item Menu disap-  
pears and “FOCUS” is displayed in the upper  
left corner. The focus is locked at this point.  
NOTES:  
After the Power Dial is set to “OFF”, Manual  
Focus is reset to “AUTO”.  
Manual focus is recommended in the following  
situations:  
When shooting a flat wall, a blue sky or an  
object with little or no contrast.  
When wire or other obstacles come between the  
camcorder and the subject.  
When shooting objects with a detailed design or  
pattern.  
When shooting under flourescent or flickering  
lighting.  
ADJUST FOCUS  
4 Rotate the Select Dial.  
•“ ” blinks while rotating the Select Dial  
upward to focus on faraway targets, and  
blinks while rotating the Select Dial down-  
ward to focus on closer targets.  
•When the focus reaches its near or far limit,  
the “ ” or “ ” will begin blinking.  
•When focus cannot be adjusted manually, try  
zooming in or out, then try the manual focus  
adjustment again.  
RECORDING Advanced Features (Cont.)  
42  
EN  
Exposure Control  
Usually this is adjusted automatically. However, when the background is too bright or too dark in compari-  
son with the subject, the exposure could be corrected manually. Factory preset is “AUTO”.  
Display  
Lock button  
FOCUS  
AUTO  
MANUAL  
AUTO  
OFF  
4
EXPOSURE  
W. BALANCE  
FADER  
/ WIPE  
P. AE  
/ EFFECT  
M
OFF  
RETURN  
Power Dial  
Manual Mode  
Item Menu  
EXP.  
0
Select Dial  
Exposure control indicator  
To Return To Automatic Exposure Control . . .  
SELECT OPERATION MODE  
.... rotate the Select Dial to display “AUTO” then  
press it in step 3. The Exposure Control  
indicator disappears. Or set the Power Dial to  
A
1 First turn the Power Dial to “  
M
” while pressing  
down the lock button located on the dial,  
make sure the viewfinder is pulled out.  
”.  
ACCESS MANUAL MODE ITEM  
NOTES:  
2 MENU  
After the Power Dial is set to “OFF”, Exposure  
Control is reset to “AUTO”.  
Press the Select Dial. The Manual Mode Item  
Menu appears.  
Manual exposure adjustment is recommended in  
the following situations:  
When shooting using reverse lighting or when  
the background is too bright.  
When shooting on a reflective natural back-  
ground such as at the beach or when skiing.  
When the background is overly dark or the  
subject light.  
ACCESS EXPOSURE CONTROL  
3 Move the pointer and highlight bar to “EXPO-  
SURE” by rotating the Select Dial, then press it.  
Rotate the Select Dial to display “MANUAL”,  
then press it. The Manual Mode Item Menu  
disappears and “EXP.” and the Exposure  
Control indicator are displayed.  
ADJUST EXPOSURE  
4 Rotate the Select Dial to brighten or darken the  
image.  
Brightness control of the display  
To adjust the brightness of the display, rotate the  
Select Dial (pg. 19). Note that the actual  
recorded image's brightness can not be changed by  
rotating this dial.  
The adjustment range is from –6 to +6.  
END ADJUSTMENT OF EXPOSURE  
5
Press the Select Dial. Exposure adjustment is  
complete. The indication “EXP.” changes to  
“MANUAL”.  
If you want to reset the exposure, repeat step 2.  
EN  
43  
Iris Lock  
Use this function when shooting a moving subject, when zooming, when the subject changes its distance  
(thus its size in the viewfinder), or when you want to lock the brightness level.  
When the subject is close, keep the iris locked. Even when the subject moves away from you, the image will  
not darken.  
Display  
FOCUS  
AUTO  
MANUAL  
AUTO  
OFF  
EXPOSURE  
W. BALANCE  
FADER  
/ WIPE  
P. AE  
/ EFFECT  
OFF  
Lock button  
Power Dial  
4
RETURN  
M
Manual Mode Item Menu  
0 L  
Select Dial  
Iris lock  
indicator  
To Return To Automatic Iris Control . . .  
.... rotate the Select Dial to display “AUTO” then  
press it in step 3. The Exposure Control indicator  
SELECT OPERATION MODE  
1 First turn the Power Dial to “  
M
” while pressing  
down the lock button located on the dial,  
make sure the viewfinder is pulled out.  
L
and “ ” disappear. Or set the Power Dial to  
A
”.  
ACCESS MANUAL MODE ITEM  
NOTES:  
2 MENU  
Iris lock is recommended in the following situa-  
tions:  
Press the Select Dial. The Manual Mode Item  
Menu appears.  
When shooting on a reflective natural background  
such as at the beach or when skiing.  
When shooting objects under a spotlight.  
When the subject is backing away.  
When zooming.  
ACCESS EXPOSURE CONTROL  
Move the pointer and highlight bar to “EXPO-  
SURE” by rotating the Select Dial and then  
press it. Rotate the Select Dial to display  
“MANUAL”, then press it. “EXP.” is displayed.  
3
4
To lock the exposure control and the iris . . .  
CENTRE SUBJECT, LOCK IRIS  
Adjust zoom so that the subject fills the  
viewfinder, then press and hold the Select Dial  
for over 2 seconds. The exposure setting  
.... after step 3, adjust the exposure rotating the  
Select Dial. Then lock the iris in step 4. For  
automatic locking, rotate the Select Dial to  
display "AUTO", then press it in step 3. The iris  
becomes automatic after about 2 seconds.  
L
display and “ ” appear, indicating that the iris  
is locked.  
Iris  
Press the Select Dial. The indication displayed  
in the upper left corner changes from “EXP.” to  
“MANUAL”.  
Works like the pupil of the human eye. In a well-lit  
environment, the human pupil contracts to keep too  
much light from enterintg. In low lighting, the pupil  
dilates to allow more light in.  
RECORDING Advanced Features (Cont.)  
44  
EN  
White Balance Adjustment  
A term that refers to the correctness of colour reproduction under various lighting. If the white balance is  
correct, all other colours will be accurately reproduced.  
The white balance is usually adjusted automatically. However, the more advanced camcorder operator  
would prefer to control this function manually and achieve a more professional colour/tint reproduction.  
Display  
W . BAL .  
FOCUS  
AUTO  
AUTO  
AUTO  
OFF  
FOCUS  
AUTO  
AUTO  
AUTO  
OFF  
EXPOSURE  
W. BALANCE  
FADER  
EXPOSURE  
W. BALANCE  
FADER  
4
AUTO  
/ WIPE  
P. AE  
/ EFFECT  
/ WIPE  
P. AE  
/ EFFECT  
OFF  
OFF  
4
RETURN  
RETURN  
Manual Mode Item Menu  
White Balance Adjustment  
Lock button  
Power Dial  
M
Select Dial  
SELECT OPERATION MODE  
CLOSE WHITE BALANCE ADJUST-  
1 First turn the Power Dial to “  
M
5 MENT  
” while pressing  
down the lock button located on the dial,  
make sure the viewfinder is pulled out.  
Press the Select Dial again. Selection is complete.  
The indication “W. BAL.” changes to “MANUAL”.  
ACCESS MANUAL MODE ITEM  
To Return To Automatic White Balance . . .  
2 MENU  
.... select “AUTO” in step 3. Or set the Power Dial  
A
to “ ”.  
Press the Select Dial. The Manual Mode Item  
Menu appears.  
NOTES:  
White balance cannot be used when P.AE/Effects  
Sepia or Monotone are activated.  
ACCESS WHITE BALANCE ADJUST-  
3 MENT  
During 5-second recording, manually adjusted White  
Balance Adjustment settings are used, although other  
menu settings are the same as in Full Auto mode.  
Move the pointer and highlight bar to  
“W.BALANCE” by rotating the Select Dial.  
Then press it. The Manual Mode Item menu  
disappears and “W.BAL.” appears in the upper  
left corner and “AUTO” appears on the screen.  
AUTO–The white balance is adjusted automatically.  
This is the factory preset position.  
”– When shooting with the white balance  
already having been set on the subject  
(pg. 45).  
”– When shooting outdoors on a sunny day.  
”– When shooting outdoors on a cloudy day.  
SET FUNCTION PARAMETERS  
4 Cycle through the available settings of the  
selected functions by rotating the Select Dial,  
and stop when the one you want is displayed.  
”– When using a video light or other similar  
type of lighting.  
EN  
45  
Manual White Balance Operation  
If the camera is operating in manual mode, perform a Manual White Balance when shooting under various  
types of lighting  
Display  
White paper  
FOCUS  
AUTO  
AUTO  
AUTO  
OFF  
EXPOSURE  
W. BALANCE  
FADER  
4
/ WIPE  
P. AE  
/ EFFECT  
OFF  
RETURN  
Lock button  
Power Dial  
Manual Mode  
Item Menu  
M
MANUAL  
Select Dial  
Manual White Balance  
Adjustment  
To Change The Tint For Recording . . .  
.... in step 2, substitute coloured paper for white. The  
white balance is adjusted based on the colour,  
changing the tint. Red paper — deeper green;  
blue paper — orange; yellow paper — deeper  
purple.  
SELECT OPERATION MODE  
1 Follow steps 1 through 4 of the white balance  
adjustment (pg. 44), select “  
MAN.”.  
SET MANUAL WHITE BALANCE  
Hold a sheet of plain white paper in front of  
the subject. Adjust zoom or position yourself  
so that the white paper fills the screen.  
2
NOTES:  
A subject can be shot under various types of  
lighting conditions indoors (natural, flourescent,  
candlelight, etc.). Because the colour temperature  
is different depending on the light source, the tint  
of the subject will differ depending on the white  
balance settings. Use this function for a more  
natural result.  
ENTER SETTING  
3 Press the Select Dial until the  
begins  
blinking.  
•When the setting is completed, the  
blinking.  
stops  
Once you adjust white balance during Manual  
White Balance operation, the setting is retained  
even if the power is turned off or the battery  
removed.  
EXIT MANUAL WHITE BALANCE  
4 ADJUSTMENT  
Press the Select Dial. The indication “W.BAL.”  
changes to “MANUAL” and only the Manual  
White Balance indicator  
is displayed.  
PLAYBACK Basic Playback  
46  
EN  
You can watch what you’ve recorded in the viewfinder.  
Display  
Power Dial  
Tape running indicator  
4
Power lamp  
Lock button  
SELECT OPERATION MODE  
VIEWING RECORDING  
1
2
Turn the Power Dial to “PLAY” while pressing  
down the lock button located on the dial. The  
Power lamp comes on.  
4
5
Press 6/4  
.
4
appears and the recorded  
footage can be viewed. The sound is heard  
from the speaker.  
PULL OUT VIEWFINDER  
END PLAYBACK  
Pull out the viewfinder.  
Press 5. Set the Power Dial to “OFF”.  
REWIND TAPE  
•When turning to “OFF”, it is not necessary to  
press down the lock button.  
3 Press  
2
.
2
is displayed. If you rewind all  
the way to the end of the tape, it stops  
automatically.  
EN  
47  
To Perform High-Speed Search . . .  
Slow-Motion Playback  
.... press  
2
or  
3
after pressing 6/4. The tape  
To perform Slow-motion playback, the remote  
control is necessary.  
will move at approximately 9 times the normal  
playback speed. Watch in the viewfinder and,  
when you reach the spot you want to see, press  
6/4 and normal playback resumes.  
To change from normal to slow-motion playback,  
press the Pause button at the point where you  
want to start playback in slow motion, point the  
remote control at the remote sensor, and press the  
Slow Rewind or Slow Forward button on the  
remote control unit. After playing back for about  
20 seconds in Slow Rewind or after playing back  
for about 60 seconds in Slow Forward, normal  
playback resumes. To stop slow-motion playback  
in progress, press the Play button.  
.... during playback, press and hold  
2
or 3. The  
search continues as long as you hold the  
button. Once you release it, normal playback  
resumes.  
.... a slight mosaic effect appears on screen during  
High-Speed Search. This is not a malfunction.  
During slow-motion playback, due to digital  
image processing, the picture may take on a  
mosaic effect.  
Still Playback  
To temporarily stop playback, press 6/4. Press  
again to resume playback. If still playback contin-  
ues for more than about 3 minutes, the camcorder’s  
Stop mode is automatically engaged. After 5  
minutes in the stop mode, the camcorders power is  
automatically turned off.  
After the Slow Rewind or Slow Forward button is  
pressed, the still image may be displayed for a  
few seconds, then the screen may become blue  
back for a few seconds. This is not a malfunction.  
There may be a small margin between the slow-  
motion playback start point you chose and the  
start point at which the camcorder actually begins  
playback in slow motion.  
During Slow-motion playback, there will be  
disturbances in video. This is not a malfunction.  
NOTES:  
The sound is not available during High-Speed  
Search.  
Copy guarded tapes cannot be played back. The  
screen becomes blue back.  
PLAYBACK Advanced Features  
48  
EN  
Playback Zoom  
The recorded pictures can be magnified up to 10X at any time during playback.  
Remote sensor  
Press (Right) to  
move image  
Normal playback  
Press T  
Power Dial  
Lock button  
Zoom buttons  
SHIFT  
T
W
Stop button  
Play button  
Left/Right/Up/  
Down buttons  
PLAY  
STOP  
FIND THE SCENE OF INTEREST  
END ZOOM  
1 Press the Play button to start playback.  
4 Press and hold W until magnification returns to  
normal. Or, press STOP and then press PLAY.  
ACTIVATE ZOOM  
2 Press the zoom buttons (T/W) on the remote  
control. Make sure the remote control is  
pointed at the camcorder's remote sensor.  
NOTES:  
Zoom can also be used during slow-motion and  
still playback.  
During digital image processing, the quality of the  
image may suffer.  
Pressing T zooms in.  
LOCATE PORTION OF MAGNIFIED  
3 SCENE  
You can move the image on screen around to  
find a particular portion of the picture. While  
holding down SHIFT, press (Left),  
(Right), (Up) and (Down).  
EN  
49  
Playback Effects  
These effects allow you to be creative with the playback picture. You can use any one of the 4 effects.  
PLAYBACK EFFECT  
PLAYBACK EFFECT Select  
Menu  
4
OFF  
1
2
3
4
CLASSIC FILM  
MONOTONE  
SEPIA  
B/W  
STROBE  
Remote sensor  
Power Dial  
Lock button  
T
W
Play button  
PLAY  
EFFECT ON/OFF  
EFFECT  
NOTES:  
START PLAYBACK  
To deactivate the selected effect, press EFFECT  
ON/OFF on the remote control. Pressing it again  
re-activates the selected effect.  
1 Press the Play button (  
4).  
ACCESS PLAYBACK EFFECT SELECT  
2 MENU  
Repeat from step 2 when you want to change the  
selected effect.  
When “MONOTONE” or “SEPIA” is activated, the  
“MULTI 4” and “MULTI 9” Snapshot modes  
(pg. 27) are not available.  
Point the remote control at the camcorder’s  
remote sensor and press EFFECT. The  
PLAYBACK EFFECT Select Menu appears.  
SELECT PLAYBACK EFFECT  
Move the pointer and highlight bar to the  
desired effect by pressing EFFECT. The selected  
function is activated and after 2 seconds the  
menu disappears.  
The effects that can be used during playback are  
Classic Film, Monotone, Sepia and Strobe. The  
effects work the same in playback as they did in  
recording. Refer to page 40 for more information.  
3
PLAYBACK Advanced Features (Cont.)  
50  
EN  
Playback Menu  
The Playback Menu allows you to set the following functions:  
Playback Sound (32 kHz, 48 kHz), Synchro Comp, Display and Time Code. The following procedure applies  
to all except Synchro Comp (pg. 64, 65).  
Display  
FULL SOUND  
FULL SOUND  
SOUND2  
SOUND2  
SOUND1  
48kHz MODE  
32kHz MODE  
SYNCHRO  
FULL SOUND  
SOUND1  
0 . 0  
4
48kHz MODE  
32kHz MODE  
SYNCHRO  
FULL SOUND  
SOUND1  
0 . 0  
SOUND1  
DISPLAY  
ON  
DISPLAY  
ON  
ON  
OFF  
TIMECODE  
OFF  
TIMECODE  
OFF  
ON  
4
END  
END  
OFF  
Playback Menu  
Power Dial  
Lock button  
Select Dial  
MENU button  
SELECT OPERATION MODE  
SET FUNCTION PARAMETERS  
4 Rotate the Select Dial to cycle through the  
available settings for the selected function, and  
stop when the desired setting appears. Then  
press the Select Dial, and the pointer and  
highlight bar automatically move to “END”.  
1 First turn the Power Dial to “PLAY” while  
pressing down the lock button located on the  
dial. Pull out the viewfinder fully.  
ACCESS PLAYBACK MENU  
2 Press MENU. The Playback Menu appears in  
the viewfinder and on the connected TV.  
To set parameters for other functions, repeat  
steps 3 and 4.  
SELECT FUNCTION  
CLOSE MENU  
3
Move the pointer and highlight bar to the  
desired function by rotating the Select Dial.  
Press the Select Dial to activate.  
5 Press the Select Dial again, and the menu  
disappears.  
EN  
51  
Playback Sound  
During playback, the camcorder detects the sound mode in which the recording was made, and plays the  
sound back. Select the type of sound to accompany your playback picture. (32 kHz is preset to “SOUND 1”  
and 48 kHz is preset to “FULL SOUND”.)  
RECORDING SOUND  
DISPLAY  
FULL SOUND  
SOUND 1  
OUTPUT SOUND  
32 kHz  
Stereo sound  
Stereo sound  
SOUND 2  
48 kHz  
FULL SOUND  
SOUND 1  
“L” sound is output on both channels  
“R” sound is output on both channels  
SOUND 2  
When watching a tape recorded at 32 kHz, if you want to change the output sound, access the Playback  
Menu and, in step 3 on page 50, select “32kHz MODE” and set it for “FULL SOUND”, “SOUND 1” or  
“SOUND 2”. When playing back a tape recorded at 48kHz, set in the same manner. For information on  
output sound during Audio Dubbing, see page 66.  
NOTES:  
You can also use the remote control’s AUDIO MONITOR button to change the output sound (without  
having to access the Playback Menu). Make sure you point the remote control at the camcorder’s remote  
sensor.  
During playback, the camcorder detects the sound mode in which the recording was made. This detection  
cannot be made during fast-forward or rewind. During playback the sound mode is displayed in the upper  
left corner.  
Display  
Minutes  
Seconds  
25 . 12 . 98  
TC 12 : 34 : 24  
10 : 35  
Frames*  
*25 frames = 1 second  
TIME CODE  
(Displaying The Time Code During Playback)  
DISPLAY  
(Displaying the Date During Playback)  
You can display the Time Code on screen during  
playback. This is especially useful for editing. This  
function is preset to “OFF”. To turn it on, select  
“TIME CODE” at the Playback Menu and change  
the setting (pg. 50).  
If the time has been set, the date is automatically  
recorded separately from the recorded video signal.  
You can display or remove the date anytime during  
playback. This function is preset to “ON”. To turn it  
off, select “DISPLAY” at the Playback Menu and  
change the setting (pg. 50).  
ON– The Time Code is displayed on the playback  
screen.  
ON– The date is displayed on the playback screen.  
OFFThe Time Code does not appear.  
OFFThe date is not displayed.  
PLAYBACK Basic Connections  
VCR/TV Connection (when connecting directly to the camcorder)  
Please refer to your VCR and/or TV instruction manual(s) when connecting.  
52  
EN  
Cable adapter (provided)  
If your TV or VCR has  
the 21-pin AV input  
Connector is  
under the cover.  
TV  
connector (SCART), use  
the provided cable adapter.  
To AUDIO IN  
connector (L/R)  
To  
White to AUDIO L  
Red to AUDIO R  
TV or VCR  
To AV OUT  
connector  
VIDEO/AUDIO cable  
(provided)  
VCR  
Yellow to VIDEO  
To VIDEO IN  
connector  
VIDEO OUT select  
switch (Set to CVBS)  
NOTES:  
CONFIRM POWER-OFF STATUS  
It is recommended to use the AC Charger Station  
as the power supply instead of the battery pack.  
(pg. 10)  
1 Make sure the camcorder’s power is off.  
CONNECT CAMCORDER TO TV OR VCR  
2 Pull out the connector cover and open it.  
Connect as shown in the illustration above.  
Never connect any other VIDEO/AUDIO cable  
than the provided VIDEO/AUDIO cable to the  
camcorder’s AV OUT connector.  
Make sure you adjust the TV sound volume to its  
minimum level to avoid a sudden burst of sound  
when the camcorder is turned on.  
To keep the camcorder's display from appearing  
on the TV screen during playback, press the IND.  
ON/OFF button for longer than 1 second.  
If Using A VCR . . . go to step 3.  
If not . . . go to step 4.  
CONNECT VCR OUTPUT TO TV INPUT  
3 Refer to your VCR’s instruction manual.  
TURN ON POWER  
4 Turn the Power Dial to “PLAY” while pressing  
down the lock button located on the dial and  
turn on the TV/VCR.  
SELECT TV’S VIDEO MODE  
5 Set the TV to the channel or mode appropriate  
for video playback.  
To choose whether or not the following displays  
appear on the connected TV . . .  
Date/Time, Time Code  
.... set to “ON” or “OFF” in the Playback Menu  
(pg. 50).  
Playback Sound Mode Display  
M
.... set the Power Dial to “ ”, press the MENU  
button, and set “ON SCREEN” in the Date/  
Time Menu (pg. 11) to “ON” or “OFF”.  
Then set the Power Dial back to “PLAY”.  
EN  
53  
VCR/TV Connection (using AC Charger Station)  
Attach the camcorder to the AC Charger Station, then connect the AC Charger Station to a TV or VCR  
(pg. 54, 55), as described in the following steps.  
To AC outlet  
Power cord  
Mark  
Power lamp  
CAMERA charger  
indicator  
Lock!  
Lock lever (with the Release button)  
CONFIRM POWER-OFF STATUS  
1 Make sure the camcorder’s power is off.  
ATTACH AND LOCK  
2 Align the mark on the camcorder with the one on the AC Charger Station and slide the camcorder to  
the AC Charger Station in the direction of the arrow. Slide the lock lever on the AC Charger Station in  
the direction of the arrow until it clicks. The camcorder and the AC Charger Station are now securely  
attached.  
•When removing the camcorder, press the Release button and slide the lock lever in the opposite  
direction of the arrow and detach the camcorder in the opposite direction of the arrow.  
•The AC Charger Station cannot function using the camcorders battery pack.  
NOTE:  
Never touch the connector on the bottom of the camcorder or on the AC Charger Station. If the pins are  
damaged, the connectors will become unusable due to contact failure.  
INFORMATION:  
Charging The Camcorder Battery Pack  
If you attach the camcorder with the battery installed to the AC Charger Station, you can charge the  
battery pack. After doing steps 1 and 2 above, plug the AC Charger Station’s power cord into an AC  
outlet. The AC Charger Station’s CAMERA charger indicator starts blinking to indicate that charging has  
begun. When it stops blinking but stays on, charging is complete. The charging time for one BN-V607U  
battery pack is approx. 100 minutes.  
Charging Two Battery Packs  
If two battery packs are attached to the AC Charger Station (one attached to the AC Charger Station and  
one in the camcorder attached to it), they will be charged in the order that they were attached.  
The charging time for two BN-V607U battery packs is approx. 190 minutes.  
NOTE:  
To charge the battery pack installed in the camcorder, be sure to switch off the camcorder first. If it is  
not switched off, charging will not begin.  
PLAYBACK Basic Connections (Cont.)  
VCR/TV connection (using the AC Charger Station) (Cont.)  
Please refer to your VCR and/or TV instruction manual(s) when connecting.  
54  
EN  
Connection to a TV or VCR equipped  
with a SCART connector compatible  
only with regular video signal  
1
TV  
Cable adapter (provided)  
To AUDIO OUT  
connectors (L/R)  
To AUDIO IN  
connectors (L/R)  
Core filter  
To  
Red  
White  
Red  
TV or VCR  
White  
VIDEO/AUDIO  
cable (provided)  
Yellow  
To VIDEO OUT connector  
Yellow  
To VIDEO IN connector  
VCR  
Yellow: VIDEO  
White: AUDIO L  
Red: AUDIO R  
VIDEO OUT select  
switch (Set to CVBS)  
Connection to a TV or VCR equipped  
wiht a SCART connector compatible  
with Y/C signal  
2
Yellow: Not connected  
White: AUDIO L  
Red: AUDIO R  
TV  
Cable adapter (provided)  
To AUDIO OUT  
connectors (L/R)  
To AUDIO IN  
connectors (L/R)  
Core filter  
To  
Red  
White  
White  
Red  
TV or VCR  
VIDEO/AUDIO  
cable (provided)  
VCR  
Yellow: Not connected  
To S-VIDEO OUT  
connector  
S-VIDEO cable  
(provided)  
To S-VIDEO IN  
connector  
VIDEO OUT select  
switch (Set to Y/C)  
Core filter  
EN  
55  
Connection to a TV or VCR equipped  
with an S-VIDEO IN and/or A/V  
input (RCA type) connectors  
3
Yellow: VIDEO  
White: AUDIO L  
Red: AUDIO R  
TV  
To AUDIO OUT  
connectors (L/R)  
To AUDIO IN  
connectors (L/R)  
VIDEO/AUDIO  
cable (provided)  
To  
Red  
White  
Yellow  
White  
Red  
TV or VCR  
Core filter  
Yellow  
connect when the S-VIDEO  
cable is not used  
To VIDEO OUT  
connector  
To VIDEO IN  
connector  
VCR  
(
)
To S-VIDEO OUT  
connector  
S-VIDEO cable  
(provided)  
To S-VIDEO IN  
connector  
Core filter  
NOTES:  
CONNECT AC CHARGER STATION  
1 TO TV OR VCR  
Never connect any VIDEO/AUDIO cable or S-  
VIDEO cable other than those provided to the  
AC Charger Station’s connectors.  
Connect as shown in the illustration 1, 2 or 3  
(pg. 54, 55).  
When using the provided VIDEO/AUDIO cable,  
S-VIDEO cable or editing cable, make sure you  
connect the end of the cable with the core filter to  
the camcorder. The core filter improves perform-  
ance of equipment.  
Make sure you adjust the TV sound volume to its  
minimum level to avoid a sudden burst of sound  
when the camcorder is turned on.  
To keep the camcorder's display from appearing  
on the TV screen during playback, press the  
IND.ON/OFF button for longer than 1 second.  
Set the VIDEO OUT select switch of the cable  
adapter as required:  
Y/C: When connecting to a TV or VCR which  
accepts Y/C signals and uses an S-VIDEO cable.  
CVBS: When connecting to a TV or VCR which  
does not accept Y/C signals and uses an audio/  
video cable.  
If Using A VCR . . . go to step 2.  
If not . . . go to step 3.  
CONNECT VCR OUTPUT TO TV  
2 INPUT  
Refer to your VCR’s instruction manual.  
TURN ON POWER  
3
SELECT TV’S VIDEO MODE  
4 Set the TV to the channel or mode appropriate  
for video playback.  
To choose whether or not the following displays  
appear on the connected TV . . .  
Date/Time, Time Code  
.... set to “ON” or “OFF” in the Playback Menu  
(pg. 50).  
Playback Sound Mode Display  
M
.... set the Power Dial to “ ”, press the MENU  
button, and set “ON SCREEN” in the Date/  
Time Menu (pg. 11) to “ON” or “OFF”.  
Then set the Power Dial back to “PLAY”.  
PLAYBACK Advanced Connections  
56  
EN  
Connection To A Video Unit Equipped With A DV Connector  
Connection to the Digital Printer GV-DT1 (optional) allows you to print out the images or to transfer the  
captured image from the Digital Printer to a personal computer. It is also possible to copy recorded scenes  
from the camcorder onto another video unit equipped with a DV connector. This function is called Digital  
Dubbing (pg. 59), which offers virtually no image or sound deterioration.  
To AC outlet  
PC  
To PARALLEL  
(PRINTER)  
connector  
Video unit equipped  
with a DV input  
connector  
Printer cable  
(commercially available)  
2 way-Parallel Interface  
Lock!  
To DV IN connector  
To PARALLEL  
connector  
DV cable (optional)  
To DV OUT connector  
To DV IN connector  
Connector is  
under the cover.  
Digital Printer  
EN  
57  
CONFIRM POWER-OFF STATUS  
SUPPLY POWER  
1 Make sure all the units are turned off.  
5 Plug the AC Charger Station’s power cord into  
an AC outlet.  
ATTACH CAMCORDER TO AC  
2 CHARGER STATION  
TURN ON POWER  
6
Turn the camcorders Power Dial to “PLAY”,  
Attach the camcorder to the AC Charger  
Station referring to step 2 as shown in the  
illustration on pg. 53.  
A
M
” or “ ” while pressing down the lock  
button located on the dial and turn on the  
other units.  
CONNECT CAMCORDER TO PRINTER  
3 OR VIDEO UNIT EQUIPPED WITH  
DV INPUT CONNECTOR  
NOTES:  
You cannot use the battery pack installed in the  
camcorder as the power supply since a digital  
signal is output from the DV OUT connector  
only when using the AC Charger Station.  
When using the camcorder for dubbing, be sure  
to use it as a player. The camcorder's DV  
connector is only for output.  
Pull out the connector cover and open it. Make  
connections to the device you want to connect  
to using the DV cable, as shown in the  
illustration.  
CONNECT PRINTER TO PC  
4 Connect the printer cable to the printers  
PARALLEL connector and the PC’s PARALLEL  
(PRINTER) connector.  
Also refer to the instruction manuals of the  
connected units.  
EDITING  
58  
EN  
Dubbing  
You can copy recorded scenes from the camcorder onto a videotape. Refer to your VCR’s instruction manual  
for details.  
T
W
Stop button  
Play button  
DISPLAY  
PLAY  
STOP  
Power Dial  
Lock button  
Player  
Remote sensor  
Recorder  
IND. ON/OFF  
button  
VCR  
(Recording deck)  
Lock!  
NOTES:  
MAKE CONNECTIONS  
You can use Playback Zoom (pg. 48) or  
Playback Effects (pg. 49) in step 2.  
1 Connect the AC Charger Station to your VCR  
as shown in the illustration on page 54 or 55.  
Please also refer to your VCR’s instruction  
manual before dubbing.  
Before you start dubbing, make sure that the  
indications do not appear on the connected TV. If  
they do appear during dubbing, they are being  
recorded onto the new tape.  
To clear the Playback Sound Mode Display, press  
DISPLAY on the remote control.  
Select “DISPLAY” and “TIME CODE” from the  
Playback Menu (pg. 50) to show or hide the  
Date/Time and the Time Code on the recording.  
To show or hide all indications, press the  
IND.ON/OFF button on the camcorder for longer  
than 1 second.  
START PLAYBACK  
2
Press the Play button (4) to play back the  
source tape.  
START RECORDING  
3 While watching on the connected TV, engage  
your VCR’s record mode from the spot on the  
source tape you want to begin recording.  
PAUSE RECORDING  
4 Engage your VCR’s pause mode to stop  
recording a segment.  
END RECORDING  
5 Press the Stop button (5) to stop the source  
tape, and engage the VCR’s stop mode.  
EN  
59  
Digital Dubbing  
It is also possible to copy recorded scenes from the camcorder onto other video unit equipped with a DV  
connector. Since a digital signal is sent, there is little if any image or sound deterioration.  
To AC outlet  
T
W
Connector is  
under the cover.  
PLAY  
STOP  
Lock!  
Video unit equipped  
with DV connector  
DV cable (optional)  
To DV IN  
connector  
To DV OUT  
connector  
NOTES:  
CONFIRM POWER-OFF STATUS  
You cannot use the battery pack installed in the  
camcorder as the power supply since a digital  
signal is output from the DV OUT connector  
only when using the AC Charger Station.  
When using the camcorder for dubbing, be sure  
to use it as a player. The camcorder's DV  
connector is only for output.  
1 Make sure the camcorder's power is off.  
MAKE CONNECTIONS  
2 Attach the camcorder to the AC Charger  
Station referring to step 2 as shown in the  
illustration on pg. 53.  
Connect the camcorder to your video unit  
equipped with a DV connector using the DV  
cable (optional) as shown in the illustration.  
If a blank portion is played back during dubbing,  
an unusual image may be dubbed.  
Even though the DV cable is connected correctly,  
sometimes the image may not appear in step 3. If  
the above occurs, turn off power and make  
START PLAYBACK  
3
Press the Play button (4) to play back the  
source tape.  
connections again.  
1
The image with Digital Zoom, Fade/Wipe Effects,  
P.AE/Effects and Snapshot is not output from the  
DV OUT connector. Only the original playback  
image is output from it.  
START RECORDING  
4 While watching the playback picture, engage  
the DV connector-equipped video unit's record  
mode from the spot on the source tape you  
want to begin recording.  
EDITING (Cont.)  
60  
EN  
Brand Setting  
Before you can perform Random Assemble Editing  
(pg. 61 – 63), or control the VCR using the  
remote control, you must set the VCR brand.  
VCR (Recording deck)  
SET REMOTE/VCR CODE  
Before operation, make sure the lithium battery is  
installed in the remote control (pg. 16).  
SET REMOTE TO OPERATE VCR  
1 Turn off the power to the VCR and point the  
remote towards the VCRs infrared sensor.  
Then, referring to the VCR CODE LIST on the  
left, press and hold MBR SET, and press button  
(A) and then (B).  
3
T
W
MBR SET  
SHIFT  
1
6
2
4
5
•The code is automatically set once you  
release the MBR SET button, and the VCR’s  
power comes on.  
OPERATE VCR  
2 Make sure the VCR’s power is on. Then, while  
holding SHIFT, press the button on the remote  
for the desired function. The functions the  
remote can control are PLAY, STOP, PAUSE, FF,  
REW and VCR REC STBY (you don’t need to  
press SHIFT for this one).  
7 8 9 `  
VCR CODE LIST  
VCR BRAND BUTTONS  
VCR BRAND BUTTONS  
You’re now ready to try Random Assemble  
Editing.  
NAME  
(A) (B)  
NAME  
(A) (B)  
AKAI  
6
6
7
2ꢀ  
4ꢀ  
7
PHILIPS  
1
9
1
9
9
9
1
3
7
9ꢀ  
5ꢀ  
1ꢀ  
4ꢀ  
1ꢀ  
6ꢀ  
2ꢀ  
3ꢀ  
2ꢀ  
IMPORTANT  
Although the MBR is compatible with JVC VCRs  
and those of many other makers, it may not work  
with yours or may offer limited functions.  
BLAUPUNKT  
FERGUSON  
1
3
9
9
3
7ꢀ  
8ꢀ  
2
NOTES:  
If the VCR’s power doesn’t come on in step 1, try  
another code from the VCR CODE LIST.  
Some brands of VCR don’t come on automati-  
cally. In this case, turn the power on manually  
and try step 2.  
GRUNDIG  
HITACHI  
1
3
4ꢀ  
4
SANYO  
3
3
9
9
1
1
6
6
3
3
9
9
9
3
6
6
6ꢀ  
5
1ꢀ  
6
5ꢀ  
`
5ꢀ  
`ꢀ  
9ꢀ  
1ꢀ  
1ꢀ  
6ꢀ  
7ꢀ  
2
9ꢀ  
1
6
6
6ꢀ  
3
SELECO,  
REX  
If the remote control is not able to control the  
VCR, use the controls on the VCR.  
When the remote control's battery runs out, the  
VCR brand you have set will be erased.  
In that case, replace the old battery with a new  
one to reset the VCR brand.  
JVC  
A
B
C
9
9
9
1ꢀ  
6ꢀ  
3
SHARP  
SONY  
MITSUBISHI  
6
6
7ꢀ  
8
NEC  
3
3
7ꢀ  
8
THOMSON,  
TELEFUNKEN,  
SABA,  
PANASONIC  
1
1
1
9
1
3ꢀ  
7ꢀ  
1ꢀ  
4ꢀ  
8
NORDMENDE  
TOSHIBA  
EN  
61  
Random Assemble Editing  
Using the remote control, you can use P.AE/Effects and make an original edited tape.  
To EDIT connector  
Editing cable  
(provided)  
To remote  
pause  
connecter  
Core filter  
DISPLAY  
T
W
PLAY  
VIDEO/  
AUDIO cable  
(provided)  
FADE/WIPE  
R.A. EDIT  
ON/OFF  
Red to AUDIO R  
White to AUDIO L  
Yellow to VIDEO  
White to AUDIO L  
Red to AUDIO R  
Yellow to VIDEO  
Core filter  
VCR  
(Recording deck)  
To S-VIDEO OUT connector  
Cable adapter (provided)  
If your VCR has the 21-  
pin AV input connector  
(SCART), use the provided  
cable adapter.  
S-VIDEO cable  
(provided)  
Core  
filter  
VIDEO OUT  
select switch  
(Y/C or CVBS)  
Remote sensor  
Source tape  
(Camcorder)  
New tape  
(VCR)  
NOTES:  
MAKE CONNECTIONS  
When using a JVC VCR with a remote pause  
terminal, connect the EDIT connector on the AC  
Charger Station to the VCRs remote pause terminal  
using an editing cable.  
1 Make sure that the playback picture and sound  
are available on the connected TV (pg. 54,  
55).  
If you use a JVC VCR not equipped with a remote  
pause terminal or a non-JVC VCR, connect the AC  
Charger Stations EDIT connector to the remote  
control’s remote pause connector using an editing  
cable.  
Connections should be made while the power  
is off. Making connections with the power on  
can lead to electrical shock or malfunctions.  
START SOURCE PLAYBACK  
Set the VIDEO OUT select switch of the cable  
adapter as required:  
2
First turn the Power Dial to “PLAY” while  
pressing down the lock button located on the  
dial. Press PLAY and then press R.A. EDIT ON/  
OFF on the remote control. Make sure to point  
the remote control at the camcorder’s remote  
sensor.  
Y/C: When connecting to a TV or VCR which accepts  
Y/C signals and uses an S-VIDEO cable.  
CVBS: When connecting to a TV or VCR which does  
not accept Y/C signals and uses an audio/video cable.  
Before Random Assemble Editing, make sure the  
indications don’t appear on the TV monitor. If they  
appear during Random Assemble Editing, they will  
be recorded onto the new tape. To clear the Playback  
Sound Mode Display, press DISPLAY on the remote  
control. Select “DISPLAY” and “TIME CODE” from  
the Playback Menu (pg. 50) to show or hide the  
Date/Time and the Time Code on the recording. To  
show or hide all indications except for the Random  
Assemble Editing Menu, press IND. ON/OFF on the  
camcorder for longer than 1 second. When Random  
Assemble Editing starts, its indications disappear and  
are not recorded on the new tape.  
•The Random Assemble Editing Menu appears  
on the TV screen.  
EXECUTE FADE/WIPE IN  
3 (IF NECESSARY)  
Press FADE/WIPE on the remote control.  
•Cycle through the effects by pressing  
repeatedly, and stop when the one you want  
is displayed.  
You can’t use a Picture Wipe/Dissolve at the  
beginning of Program 1.  
CONTINUED ON NEXT PAGE  
EDITING (Cont.)  
62  
EN  
Remote sensor  
Program  
IN  
OUT  
MODE  
1 – –– : ––  
~
~
~
~
~
~
~
~
2
3
4
5
6
7
8
Power Dial  
TIME CODE  
TOTAL  
–– : ––  
00 : 00  
T
W
Random Assemble  
Editing Menu  
FADE/WIPE  
EFFECT  
EDIT IN/OUT  
CANCEL  
PLAY  
R.A.EDIT ON/OFF  
NOTES:  
SET EDIT-IN POINT  
To cancel the registered scene, press the CANCEL  
button on the remote control. Each time CANCEL  
is pressed, the latest registered scene is erased.  
When the source tape has more than 2 identical  
time codes (pg. 21), the camcorder may not  
find the Edit-In point you chose and a malfunc-  
tion may occur.  
4 At the beginning of the scene, press EDIT IN/  
OUT on the remote control. The Edit-In  
position appears on the Random Assemble  
Editing Menu.  
SET EDIT-OUT POINT  
5 At the end of the scene, press EDIT IN/OUT.  
The Edit-Out position appears on the Random  
Assemble Editing Menu.  
When choosing a scene, set Edit-In and Edit-Out  
points so that there’s a relatively large difference  
between them.  
If the search time for an in-point exceeds 5  
minutes, the recording decks Record-Standby  
mode will be cancelled and editing will not take  
place.  
If there are blank portions before or after the  
Edit-In and Edit-Out points, a blue-backed screen  
may be included in the edited version.  
Since time codes register time only as accurately  
as seconds, the time code total time may not  
match the total programme time exactly.  
Turning off the camcorders power erases all  
registered Edit-In and Edit-Out points.  
If you use Sepia or Monotone P.AE/Effects, you  
can’t use the Dissolve or Black & White Fader. In  
this case the Dissolve or Black & White indicator  
begins blinking. Once the next Edit-In point is  
registered, the effect is turned off. To combine  
these effects, use Sepia or Monotone during  
recording, then use Dissolve or Black & White  
Fader during Random Assemble Editing.  
During Digital Dubbing, Fade/Wipe Effects and  
P.AE/Effects are not available.  
USE FADE WIPE ON SCENE  
6 TRANSITION (IF NECESSARY)  
Press FADE/WIPE.  
Cycle through the effects by pressing  
repeatedly, and stop when the one you want  
is displayed.  
If you select a Fade/Wipe effect for an  
Edit-Out point, the effect is automatically  
applied to the following Edit-In point.  
You can’t use a Picture Wipe/Dissolve at the  
end of the last scene.  
When you use Fade/Wipe effects, that time is  
included in the total time (this does not apply  
to Picture Wipe/Dissolve).  
USE P.AE/EFFECT (IF NECESSARY)  
7 Press EFFECT.  
Cycle through the effects by pressing  
repeatedly, and stop when the one you want  
is displayed.  
You can use Classic Film, Monotone, Sepia  
or Strobe effects.  
EN  
63  
Remote Sensor  
Stop button  
Pause button  
Rewind button  
Power Dial  
START/STOP button  
IN  
00 : 25  
07 : 18  
OUT  
MODE  
––  
WH  
1
2
~
~
~
~
~
~
~
~
02 : 05  
08 : 31 ––  
05 : 53  
13 : 15  
P
P
B/W  
3  03 : 33  
4
5
09 : 30  
15 : 55  
16 : 20 –– ––  
T
W
6 – –– : ––  
7
8
TIME CODE  
TOTAL  
16 : 30  
9 : 39  
FADE/WIPE  
EFFECT  
EDIT IN/OUT  
CANCEL  
PAUSE  
Random Assemble  
Editing menu  
R.A. EDIT ON/OFF  
VCR REC STBY  
REGISTER ADDITIONAL SCENES  
START EDITING  
8 Repeat steps 4 7 (pg. 62).  
11 Press the START/STOP button on the  
camcorder. Editing proceeds as programmed,  
right through to the end of the last registered  
scene.  
To change previously registered points, press  
CANCEL on the remote control. The  
registered points disappear, one at a time,  
from the most recently registered point.  
•If you're not using Fade/Wipe or P.AE/Effects,  
repeat steps 4 and 5 only.  
•Pressing START/STOP on the remote control  
does not start editing.  
•When dubbing is complete, the camcorder  
enters the Pause mode, and the recorder  
enters its Record-Standby mode.  
•If you don’t register an Edit-Out point, the  
tape will be dubbed all the way to the end  
automatically.  
PREPARE SOURCE TAPE  
9
Rewind the tape in the camcorder to the  
beginning of the scene you want to edit and  
press the Pause button (6).  
ENGAGE VCR'S RECORD-PAUSE  
STOP EDITING  
10 MODE  
12  
Engage the Stop modes for the camcorder and  
the VCR.  
Point the remote control towards the VCR’s  
remote sensor and press VCR REC STBY, or  
manually engage the VCR’s Record-Pause  
mode.  
To make the R.A. Edit counter display disap-  
pear, press R.A. EDIT ON/OFF on the remote  
control.  
NOTES:  
Pressing R.A. EDIT ON/OFF on the remote control clears all settings registered during Random Assemble  
Editing.  
When the editing cable is connected to the Pause terminal during dubbing, make sure the remote control  
is pointed at the VCR’s sensor, and that the path between the two is unobstructed.  
If, during Random Assemble Editing, you press any button on the camcorder, its Record-Standby mode is  
automatically engaged.  
Random Assemble Editing may not function properly when using a tape including several duplicated Time  
Codes. (pg. 21).  
EDITING (Cont.)  
64  
EN  
For More Accurate Editing  
Some VCRs make the transition from Record-Standby to Record mode faster than others. Even if you begin  
editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find  
that you’ve recorded scenes you didn’t want. For a cleanly edited tape, confirm and adjust the timing of the  
camcorder against your VCR.  
Diagnosing VCR’s against Camcorder Timing  
Remote sensor  
Power Dial  
VCR  
Program 1  
(Recording deck)  
IN  
OUT  
MODE  
1 – –– : ––  
~
~
~
~
~
~
~
~
2
3
4
5
6
7
8
Lock!  
T
W
TIME CODE  
TOTAL  
–– : ––  
00 : 00  
Random Assemble Editing Menu  
R.A.EDIT ON/OFF  
PREPARE FOR R.A. EDIT  
PLAY BACK DUBBED SCENE  
1 Play back the tape in the camcorder, then point  
the remote control at the camcorders remote  
sensor and press R.A. EDIT ON/OFF.  
3
•If any images from the scene prior to the  
transition you chose for your Edit-In point  
were recorded, that means your VCR moves  
quickly from Record-Pause to Record mode.  
•If the scene you tried to dub starts in  
Random Assemble Editing Menu” appears  
on the TV screen.  
progress, the VCR is slow to start recording.  
CHOOSE A SCENE  
2 Perform Random Assemble Editing on Program  
1 only. In order to check VCR and camcorder  
timing, select the beginning of a scene  
transition as your Edit-In point.  
EN  
65  
Adjustment of VCR‘s against Camcorder Timing  
Display  
48kHz MODE  
FULL SOUND  
SOUND1  
0 . 0  
ON  
OFF  
32kHz MODE  
SYNCHRO  
DISPLAY  
4
TIMECODE  
END  
VCR  
(Recording deck)  
Playback Menu  
Lock!  
48kHz MODE  
32kHz MODE  
SYNCHRO  
FULL SOUND  
SOUND1  
0 . 0  
ON  
OFF  
4
DISPLAY  
Power Dial  
TIMECODE  
END  
Select Dial  
Lock button  
MENU button  
ACCESS PLAYBACK MENU  
CLOSE MENU  
4 Point the remote control at the camcorder’s 7 Press the Select Dial twice.  
remote sensor and press R.A. EDIT ON/OFF to  
•Now perform Random Assemble Editing  
beginning with step 2 on page 61.  
make the Random Assemble Editing menu  
disappear, then press MENU. The Playback  
Menu appears on the TV screen.  
NOTES:  
Before performing actual Random Assemble  
Editing, do a few Random Assemble Editing trial  
runs to check whether the value you have input is  
appropriate or not, and make adjustments  
accordingly.  
SELECT FUNCTION  
5
Move the pointer and highlight bar to  
“SYNCHRO” by rotating the Select Dial, then  
press it. The value for “SYNCHRO” is high-  
lighted.  
Depending on the recorder, there may be  
situations where the timing difference cannot be  
fully corrected.  
INPUT CORRECTION DATA  
6 Based on the diagnostics performed (pg. 64),  
you can now increase the VCR’s speed by  
rotating the Select Dial upward. You can also  
slow down the VCR’s speed by rotating the  
Select Dial downward. The adjustment range is  
from –1.3 to +1.3 seconds, in 0.1-second  
increments.  
EDITING (Cont.)  
66  
EN  
Audio Dubbing  
The audio track can be customized only when recorded on the 32 kHz mode (pg. 32).  
NOTES:  
Audio Dubbing is not possible on a tape recorded at 48 kHz, on a tape recorded in the LP mode or on a  
blank portion of a tape.  
To perform Audio Dubbing while watching in the television, make connections (pg. 52 – 55).  
Stereo microphone  
6e  
Power Dial  
Audio Dub Standby  
External stereo microphone  
input connector  
Remote sensor  
DISPLAY  
T
W
AUDIO MONITOR  
A.DUB  
AV OUT  
(headphones)  
connector  
PLAY  
PAUSE  
STOP  
Connector is  
under the cover.  
FIND EDIT-IN POINT  
PAUSE DURING DUBBING  
1 Play back the tape to locate the point where 4 Press PAUSE.  
editing will start, then press PAUSE.  
STOP DUBBING  
5 Press STOP.  
ENGAGE AUDIO DUB STANDBY  
2 While holding A. DUB on the remote control,  
press PAUSE. “6e” appears.  
BEGIN DUBBING  
3 Press PLAY, then begin “narrating”.  
Speak into the microphone.  
EN  
67  
NOTES:  
Audio dubbing is possible using an optional microphone connected to the external microphone input  
connector (MIC).  
While an optional microphone is connected, the built-in microphone is disabled.  
When editing onto a tape that was recorded at 32 kHz, the old and new soundtracks are recorded separately.  
To select the desired sound for playback, press AUDIO MONITOR on the remote control.  
If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded  
areas.  
If feedback or howling occurs during TV Playback, move the camcorder’s microphone away from the TV,  
or turn down the TV’s volume.  
To hear sound, connect optional headphones to the AV OUT (headphones) connector.  
If you change from 32 kHz to 48 kHz in mid-recording and then use the tape for Audio Dubbing, it is not  
effective from the point where 48 kHz recording began.  
During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded at 48 kHz  
or a blank portion, Audio Dubbing stops and “ERROR! REFER MANUAL” appears.  
RECORDING SOUND  
DISPLAY  
FULL SOUND  
SOUND 2  
OUTPUT SOUND  
32 kHz  
Original and new tracks are combined and output in stereo.  
New track is output on both “L” and “R” channels in stereo.  
Original track is output on both “L” and “R” channels in stereo.  
SOUND 1  
TROUBLESHOOTING  
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC  
dealer.  
68  
EN  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
1. No power is supplied.  
1. •The power is not connected  
properly.  
1. Connect the AC Charger  
Station securely (pg. 10).  
Replace the dead battery  
with a fully charged one  
(pg. 9).  
•The battery is dead.  
•The viewfinder is not pulled  
out when recording.  
Pull out the viewfinder.  
2. “SET DATE/TIME!”  
2. •The built-in rechargeable  
clock lithum battery is  
2. Connect the camcorder to  
an AC outlet using the AC  
Charger Station etc. for over  
24 hours to charge the  
clock lithum battery  
appears.  
discharged and the previ-  
ously set date/time is erased.  
(pg. 11).  
3. Recording cannot be  
3. •The tape’s record safety tab  
is set to “SAVE”.  
3. Set the tapes record safety  
performed.  
tab to “REC” (pg. 12).  
A
•The Power Dial is set to  
“PLAY”.  
•“TAPE END” appears.  
•The cassette's cover is open.  
Set the Power Dial to “ ”,  
M
”, “5S” or “  
(pg. 17).  
Replace with new cassette  
(pg. 12).  
Close the cassette's cover.  
4. There is no playback  
4. •The camcorder is not getting  
power, or some other  
4. Turn the camcorder’s power  
off and on again  
picture.  
malfunction exists.  
(pg. 18).  
A
5. Some functions are not  
available using the MENU  
button.  
5. •The Power Dial is set to “ ”.  
5. Set the Power Dial to any  
A
position except “  
(pg. 17).  
A
6. Some functions are not  
available using the Select  
Dial.  
6. •The Power Dial is set to “ ”,  
6. Set the Power Dial to any  
A
“5S” or “ ”.  
position except “ ”, “5S”  
or “ ” (pg. 17).  
7. The focus does not adjust  
7. •Focus is set to “MANUAL”.  
•The recording was done in a  
dark place, or the contrast  
was low.  
7. Set Focus to “AUTO”  
(pg. 41).  
automatically.  
Clean the lens and check  
the focus again (pg. 73).  
•The lens is dirty or covered  
with condensation.  
8. The cassette won’t load  
8. •The cassette is in the wrong  
position.  
8. Set it in the right position  
(pg. 12).  
properly.  
•The battery’s charge is low.  
Install a fully charged  
battery (pg. 9).  
9. Play, Rewind and Fast-  
Forward functions don’t  
work.  
9. •The Power Dial is not set to  
9. Set the Power Dial to  
“PLAY”.  
“PLAY” (pg. 46).  
EN  
69  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
10. The tape is moving, but  
10. Your TV has AV input  
terminals, but is not set to its  
VIDEO mode.  
10. Set the TV to the mode or  
channel appropriate for video  
playback (pg. 52 – 55).  
Close the cassette's cover  
(pg. 12).  
there’s no picture.  
•The cassette’s cover is open.  
11. In the 5-Second mode,  
recording ends before 5  
seconds have elapsed.  
11. •The 5-Second mode in the  
System Menu is set to  
“ANIM.”.  
11. •Select “5S” or “5SD” in the  
System Menu (pg. 32).  
12. Snapshot mode cannot be  
12. •The Squeeze mode is  
12. •Disengage the Squeeze  
used.  
selected.  
mode (pg. 29).  
13. Digital Zoom doesn’t  
13. •10X optical zoom is  
selected.  
13. Wait until the Picture Wipe  
or Dissolve effects are  
completed (pg. 35).  
•Change the setting of either  
the System Menu or the  
Power Dial (pg. 31).  
•Do not attempt to take a  
Snapshot when performing  
Digital Zoom (pg. 26,  
30).  
work.  
•Picture Wipe or Dissolve are  
being used in a scene  
transition.  
•5-Second recording was  
done with the Power Dial set  
to “5S”, and with “5SD”  
selected in the System Menu.  
•Snapshot was attempted  
during Digital Zoom.  
A
M
14. P.AE/Effects and Fade/  
14. •The Power Dial is set to “  
14. •Set the Power Dial to “  
Wipe Effects don’t work.  
or “5S”.  
(pg. 17).  
15. The Black & White Fader  
15. •The Sepia or Monotone  
15. Turn off Sepia and Mono-  
doesn’t work.  
effects are activated.  
tone (pg. 40).  
16. The Dissolve function  
16. P.AE/Effect Sepia, Monotone  
or Slow is activated.  
16. Turn off Sepia, Monotone or  
Slow before adding  
doesn’t work.  
•The Squeeze mode is  
selected.  
•The previously selected P.AE/  
Effect was changed after the  
last selected scene for  
editing was registered.  
Dissolve to a scene  
transition (pg. 40).  
•Make sure that the Squeeze  
mode in the Recording  
Menu is set to “OFF”  
(pg. 29).  
•Make sure you have  
selected the P.AE/Effects you  
want before starting editing  
(pg. 40).  
17. Scene transition does not  
17. •When using “Picture Wipe/  
Dissolve” (pg. 35) or  
“Dissolves during 5 second  
mode recording”  
17.  
go as expected.  
(pg. 24), there is a delay  
of a fraction of a second  
between the previous record  
stop-point and the Dissolve  
start-point. This is normal,  
but this slight delay becomes  
especially noticeable when  
shooting fast-moving subject  
or during rapid panning.  
————  
CONTINUED ON NEXT PAGE  
TROUBLESHOOTING (Cont.)  
70  
EN  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
18. The Picture Wipe and  
Dissolve functions don’t  
work.  
18. •The last selected editing  
scene is ending.  
18. Select Picture Wipe or  
Dissolve before beginning  
recording. The effects are  
then automatically activated  
(pg. 35).  
•At the end of the last  
selected scene for editing,  
the Power Dial was set to  
“OFF”.  
Do not turn off the  
•The power is off.  
camcorder’s power after  
setting Edit-In and Edit-Out  
points, as they will all be  
erased (pg. 35).  
The camcorder automati-  
cally shuts off after 5  
minutes have elapsed in the  
Record-Standby mode.  
Make sure you continue  
operations within 5 minutes  
after engaging Record-  
Standby mode (pg. 35).  
19. The Picture Wipe function  
19. •The Slow Shutter effect is  
activated.  
19. Make sure the Squeeze  
mode, Cinema mode, or  
Slow Shutter effect is not  
activated when preparing to  
use the Picture Wipe  
doesn’t work.  
•The Squeeze or Cinema  
mode is selected in the  
Recording Menu.  
function (pg. 29, 40).  
20. Even when Slow Shutter  
isn't selected, the image  
looks like it is activated.  
20. •When shooting in the dark,  
the unit becomes highly  
sensitive to light and the  
image takes on an effect  
similar to Slow Shutter.  
20. If you want the lighting to  
look more natural, set GAIN  
UP to “AGC” or “OFF” in  
the Recording Menu  
(pg. 30).  
21. There is no strobe when  
the Classic Film or Strobe  
effect is activated.  
21. •The Picture Wipe or Dissolve 21. Do not try to use the Classic  
function is in use.  
Film or Strobe effect during  
a scene transition  
(pg. 40).  
22. White Balance cannot be  
22. •The Sepia or Monotone  
22. Turn off Sepia or Monotone  
before setting White  
activated.  
effect is activated.  
Balance (pg. 39).  
23. When shooting a subject  
illuminated by bright light,  
vertical lines appear.  
23. •This is a result of exceed-  
ingly high contrast, and is  
not a malfunction.  
23.  
————  
24. When the screen is under  
direct sunlight during  
shooting, the screen  
becomes red or black for  
an instant.  
24. •This is not a malfunction.  
24.  
————  
25. There are disturbances in  
25. •If Audio Dubbing has  
been performed  
25. Use a new, or infrequently  
used, tape for Audio  
audio.  
repeatedly on the same  
portion of the tape,  
disturbance to the sound  
may result.  
Dubbing (pg. 66, 67).  
EN  
71  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
26. During recording, sound  
26. The optional headphones are  
not connected to the head-  
phones connecto.  
26. Connect the optional  
headphones to the head-  
phones connector  
cannot be heard.  
(pg. 74).  
27. During recording, the  
27. •“DISPLAY” is set to “OFF” in  
27. •Set “DISPLAY” to “ON” in  
the Date/Time Menu  
(pg. 11).  
date/time does not appear.  
the Date/Time Menu.  
•Press the IND.ON/OFF  
button for longer than 1  
second to make the  
indicators appear  
(pg. 19).  
28. The indicators and  
messages do not appear  
on screen.  
28. •“ON SCREEN” is set to  
“OFF” in the Date/Time  
Menu.  
28. •Set “ON SCREEN” to “ON”  
in the Date/Time Menu  
(pg. 23).  
•Press the IND.ON/OFF  
button for longer than 1  
second to make the  
indicators appear  
(pg. 19).  
29. The indicators do not  
29. You have made the indica-  
29. Press the IND.ON/OFF button  
for longer than 1 second to  
make the indicators appear  
(pg. 19).  
appear in the viewfinder.  
tors disappear.  
30. The viewfinder indications 30. Certain FADE/WIPE, P.AE/  
30. •Re-read the sections  
covering FADE/WIPE, P.AE/  
Effects and DIS (pgs. 30,  
33 – 40).  
blink.  
Effects, DIS and other functions  
that cannot be used together  
are selected at the same time.  
31. Coloured bright spots  
appear all over the  
viewfinder.  
31. •The viewfinder is made with  
high-precision technology.  
However, black spots or  
bright spots of light (red,  
green or blue) may appear  
constantly on the viewfinder.  
These spots are not recorded  
on the tape. This is not due  
to any defect of the unit.  
(Effective dots: more than  
99.99 %)  
31.  
————  
CONTINUED ON NEXT PAGE  
TROUBLESHOOTING (Cont.)  
72  
EN  
SYMPTOM  
POSSIBLE CAUSES  
CORRECTIVE ACTION  
32. The viewfinder indications 32. •During playback of the  
32.  
are distorted.  
unrecorded portion, High-  
speed Search and still  
playback, viewfinder  
————  
indications appear distorted.  
This is not a defect.  
33. An unusual mark appears  
33.  
33. Check the section of the  
manual that explains the  
viewfinder indications  
(pgs. 77 – 79).  
in the viewfinder.  
————  
34. An error indication  
(E01 — E06) appears in  
the viewfinder.  
34. •A malfunction of some kind  
has occurred. In this case  
the camcorder’s functions  
become unusable.  
34. Remove the power supply  
(battery pack, etc.) and press  
RESET button, and wait a few  
minutes for the indication to  
clear. When it does, you can  
resume using the camcorder.  
If the indication remains even  
though you repeat the above  
two or three times,  
please consult your nearest  
JVC dealer.  
35. The charge indicator on  
the AC Charger Station  
does not light.  
35. The temperature of the  
battery is extremely high/low.  
Charging is difficult in places  
subject to extremely high/low  
temperatures.  
35. To protect the battery, it is  
recommended to charge it  
in places with a temperature  
of 10°C to 30°C (pg. 9).  
36. The recording mode  
indicator “LP” blinks in  
the viewfinder.  
36. •This occurs when recording  
in the LP mode is not  
36.  
available. After the indicator  
blinks, the recording mode  
switches to “SP” and  
————  
recording goes on.  
37. When the image is printed  
from the printer, a black  
bar appears at the bottom  
of the screen.  
37. •This is not a malfunction.  
37. By recording with Digital  
Image Stabilizer set to “ON”  
(pg. 30) this can be  
avoided.  
AFTER USE  
Cleaning The Camcorder  
EN  
73  
Bottom of viewfinder  
Open switch (BATTERY)  
1
Gap  
2
Battery cover  
Battery pack  
REMOVE POWER SUPPLY  
CLEAN VIEWFINDER  
1
Remove the battery pack or disconnect the AC  
Charger Station (pg. 8 – 10).  
5
6
Slide the cover in the direction of the arrow 1.  
Insert a lens blower or a soft cloth into the gap  
at the bottom of the viewfinder and clean the  
interior of the viewfinder with it 2.  
CLEAN EXTERIOR  
2 Wipe gently with a soft cloth.  
PUSH VIEWFINDER BACK IN  
Slide the cover back to its original position and  
push the viewfinder back in.  
•Put cloth in diluted mild soap and wring it  
well to wipe off heavy dirt. Then wipe again  
with a dry cloth.  
NOTES:  
CLEAN LENS  
Avoid using strong cleaning agents such as  
benzine or alcohol. This may damage the unit's  
body or cause malfunction.  
3
4
Blow it with a blower brush, then wipe gently  
with lens cleaning paper.  
When using a cleaner or chemically treated cloth  
refer to the cautions of each product.  
PULL OUT VIEWFINDER  
Pull out the viewfinder fully.  
CONTROLS, INDICATIONS AND CONNECTORS  
74  
EN  
Camcorder  
1
2
3
4
5
6
Connector cover  
Pull this out to open.  
7
8 9 0 ! @  
#
$
%
1 Stereo microphone  
! Fast-Forward button (3) (pg. 46)  
For use when recording.  
Fast-Forwards the tape.  
2 Lens hood  
@ Reset button (pg. 72)  
Turn this counterclockwise to release.  
When a malfunction occurs, press this button  
after removing the power supply (battery etc.).  
Pressing this button also resets the date/time or  
various settings.  
3 Lens cover  
Opens when the viewfinder is pulled out with  
the Power Dial set to any position except  
“PLAY” or “OFF”.  
# External stereo microphone input  
connector (MIC) (pg. 66)  
4 Tally lamp  
If an optional microphone is connected, the  
built-in microphone is disabled.  
Lights during recording.  
5 Remote sensor (pg. 48)  
Receives the signal from the remote control.  
When using the remote control, point it at the  
remote sensor.  
$ Video/audio output connector or head-  
phones connector ( /AV-OUT)  
(pg. 52)  
The provided VIDEO/AUDIO cable (ø3.5) can  
be connected to a television etc. Using optional  
headphones, you can listen to the sound.  
However, headphones equipped with volume  
control cannot be used.  
6 Camera sensor  
Be careful not to cover this area; built-in here is  
the sensor necessary for shooting.  
7 SNAPSHOT button (pg. 26)  
Press when taking a snapshot.  
% DV OUT connector (i.Link*)  
(pg. 56, 59)  
8 Stop button (5) (pg. 46)  
Stops playback of the tape.  
Connect a video unit equipped with a DV  
connector.  
9 Play/Pause button (6/4) (pg. 46)  
*i.Link refers to the IEEE 1394-1995 industry  
specification and extensions thereof. The  
logo is used for products compliant with the  
i.Link standared.  
Plays back or stops the tape temporarily.  
0 Rewind button (2) (pg. 46)  
Rewinds the tape.  
EN  
75  
^
&
*
r
t
(
y
)
q
w
e
u
Bottom of camcorder  
^ Viewfinder (pg. 15)  
w Battery cover open switch (BATTERY)  
(pg. 9)  
Pull out when recording.  
Slide down to open the battery cover.  
& Power dial (pg. 17)  
Turning the camcorder on/off, recording or  
playback is possible.  
e Function Navigator Dial (Select Dial)  
(pg. 19, 28)  
Adjusts the brightness of the display or selects  
the Menu etc. Referred to in this manual as  
“Select Dial”.  
* START/STOP button (pg. 18)  
Starts recording or stops recording to make the  
camcorder enter the record-standby mode.  
r When connecting to the AC Charger  
Station or the Battery Holder (optional),  
this part fixes the connection.  
( Zoom switch (T/W) (pg. 22)  
Adjusts zoom during recording.  
) OPEN/EJECT switch (pg. 12)  
Slide the switch down when loading/unloading a  
tape.  
t Grip/Hand strap eyelet (pg. 14)  
y Tripod mounting socket (pg. 15)  
q MENU button (pg. 28)  
u AC Charger Station connector  
Press this button to make the Menu appear.  
(pg. 10, 53)  
IND.ON/OFF button (pg. 19)  
Press and hold this button for more than approx.  
1 second to make the indications appear in the  
viewfinder.  
Connects to the AC Charger Station (provided) or  
the Battery Holder (optional).  
CONTROLS, INDICATIONS AND CONNECTORS (Cont.)  
AC Charger Station  
76  
EN  
1
2
3
@
4 5 6 7 8  
9
0
!
1 DC charger (pg. 8)  
6 S-VIDEO OUT connector  
(pg. 54, 55, 61)  
Attach the battery pack to charge.  
Outputs S-Video signal.  
2 Camcorder attachment part (pg. 53)  
Attach the camcorder to this part when charging  
the battery installed in the camcorder or when  
editing.  
Connect to a video unit equipped with an  
S-Video connector.  
7 VIDEO OUT connector  
(pg. 54, 55, 61)  
3 Multi connector (pg. 53)  
Connect to a TV or VCR using the VIDEO cable  
(provided).  
The AC Charger Station can be connected with  
this camcorder through this connector. Never  
touch it with your hand or hit it with a hard  
object; if the pins are damaged, the connectors  
will become unusable due to contact failure.  
8 AUDIO OUT connector [L/R]  
(pg. 54, 55, 61)  
Connect to a TV or VCR using the Audio cable(s)  
(provided).  
4 EDIT connector (pg. 61)  
Using an editing cable, connect to the remote  
control or VCR.  
9 DC OUT jack (pg. 10)  
Connect the DC cord (provided) and plug it into  
the camcorder.  
5 JLIP (Joint Level Interface Protocol)  
connector  
0 Lock lever (with release button)  
(pg. 53)  
Connect to a JLIP-compatible camcorder or VCR  
to control it from the computer using JLIP Player  
Pack (optional) etc.  
Slide the lock lever in the direction of the arrow  
to connect to the camcorder. To detach the  
camcorder, press the release button and slide the  
lock lever in the opposite direction of the arrow.  
NOTE:  
Make sure that the camcorder is turned on while  
connecting the camcorder to a PC using the AC  
Charger Stations JLIP connector. If the camcorder is  
turned off (because the Power Dial is set to “OFF”  
or due to Auto Shut Off* etc.) while the JLIP  
program software is used, it will be impossible to  
control the connected devices from the computer.  
In such a case, first try turning the camcorder on  
again, or unplug the JLIP connection cable from the  
AC Charger Stations JLIP connector. Then, initialize  
or run the software again.  
! Charger Indicator (for camcorder or  
battery) (pg. 8, 53)  
Blinks during charging. When charging is  
finished, this indicator stops blinking and stays  
lit. When the camcorder is turned on, charging  
is interrupted.  
@ Power lamp  
* Auto Shut Off:  
If 5 minutes elapse in the Record-Standby mode  
or in the Pause mode, the camcorder’s power  
shuts off automatically to conserve energy.  
EN  
77  
1* 2*3 4* 5 6* 7*  
MANUAL  
LP 35 min  
W
H
q
w
D
T
REC  
8*  
)
*
444  
1/250  
PAUSE  
9
(
&
0 L PHOTO  
0*  
!
#
^
5S MODE  
SOUND 32kHz  
@*  
W
25 . 12 . 98  
17 : 30  
%
$*  
Indications During Recording  
No.  
FUNCTION  
1* Displays the operation mode position.  
2* Appears when taking a Snapshot.  
(pg. 17)  
(pg. 26)  
(pg. 29)  
(pg. 18)  
(pg. 30)  
(pg. 13)  
(pg. 19)  
(pg. 18)  
(pg. 18)  
(pg. 25)  
3
Appears when in the Squeeze or Cinema mode.  
4* Appears when in the Record-Standby mode.  
Appears when Digital Image Stabilizer is engaged.  
5
6* Displays the recording mode (SP or LP).  
7* Displays the tape remaining time.  
8* Appears during recording.  
9
Appears while the tape is running.  
0* Appears during self-timer recording.  
!
Appears when the wind cut mode is engaged to cut down on noise created by wind. (pg. 32)  
@* Displays the 5 second mode recording or animation recording mode.  
Displays the sound mode for approx. 5 seconds after turning on the camcorder.  
$* Displays the date/time.  
(pg. 24)  
(pg. 32)  
(pg. 23)  
(pg. 43)  
(pg. 41)  
(pg. 42)  
(pg. 45)  
(pg. 40)  
(pg. 37, 38)  
(pg. 30)  
(pg. 22)  
#
%
^
&
*
(
)
q
w
Appears when the iris is locked.  
Appears when the focus is adjusted manually.  
Appears when the exposure is adjusted.  
Appears when the white balance is adjusted.  
Displays the selected P.AE/Effect.  
Displays the selected Fade/Wipe effect.  
Appears when Digital Zoom is activated.  
Appears during zooming.  
* :Pressing IND.ON/OFF for longer than 1 second lets you remove indications marked with * from the screen.  
CONTROLS, INDICATIONS AND CONNECTORS (Cont.)  
78  
EN  
1
2
4
32kHz SOUND1  
LP  
3
4
25 . 12 . 98  
17 : 30  
– – – – – – – – – –  
6
TC 01 : 28 : 15  
BRIGHT  
6
5
Indications During Playback  
No.  
FUNCTION  
1
2
3
Displays the sound mode.  
(pg. 51)  
Displays the recording mode.  
Appears while a tape is running.  
4
: Playback  
3
2
: Fast-Forward/High-speed search  
: Rewind/High-speed search  
: Forward slow-motion  
: Reverse slow-motion  
: Pause  
6
4
16  
6
e
: Audio Dubbing  
4
5
6
Displays the date/time.  
(pg. 51)  
(pg. 19)  
(pg. 51)  
Displays the brightness of the display.  
Displays the time code.  
EN  
79  
Warning Indications  
INDICATIONS  
FUNCTION  
Displays the battery remaining power.  
Remaining power level: high  
Remaining power level: exhausted  
As the battery power comes close to nil, the battery indicator  
blinks. When the battery power is exhausted, power turns off  
automatically.  
Appears when no tape is loaded, or when the erase  
protection tab is set to “SAVE”.  
(pg. 12)  
Appears if dirt is detected on the heads during recording.(pg. 81)  
Appears if condensation occurs. When this indication is displayed,  
the camcorder turns off automatically.  
Appears for 10 seconds after power is turned on if there's no tape  
loaded.  
TAPE!  
Appears when the tape ends during recording  
or playback.  
TAPE END  
(pg. 19)  
Appears when the date/time is not set.  
(pg. 11)  
SET DATE/TIME!  
Appears when the built-in rechargeable battery is  
discharged and the previously set date/time is erased. (pg. 11)  
Appears when Audio Dubbing is unavailable.  
(pg. 66)  
ERROR!  
REFER MANUAL  
The error indications (E01 — E06) show what type of malfunction has  
occured. When an error indication appears, the camcorder turns off  
automatically. Press the reset button after removing the power supply  
(battery, etc.), and wait a few minutes for the indication to clear.  
When it does, you can resume using the camcorder. If the indication  
E01 — E06  
remains, consult your nearest JVC dealer.  
(pg. 72)  
CAUTIONS  
80  
EN  
Battery Packs  
Cassettes  
The supplied battery pack is a  
lithium-ion battery. Before using  
the supplied battery pack or an  
optional battery pack, be sure to  
read the following cautions:  
1. To avoid hazard . . .  
....do not burn.  
To properly use and store your cassettes, be sure to  
read the following cautions:  
1. During use . . .  
.... make sure the cassette bears the Mini DV  
mark.  
.... be aware that recording onto prerecorded  
tapes automatically erases the previously  
recorded video and audio signals.  
.... make sure the cassette is positioned properly  
when inserting.  
.... do not load and unload the cassette  
repeatedly without allowing the tape to run at  
all. This slackens the tape and can result in  
damage.  
.... do not open the front tape cover. This exposes  
the tape to fingerprints and dust.  
Terminals  
....do not short-circuit the terminals.  
....do not modify or disassemble.  
....do not expose the battery to temperatures  
exceeding 60°C, as this may cause the battery  
to overheat, explode or catch fire.  
....use only specified chargers.  
2. To prevent damage and prolong service life . . .  
....do not subject to unnecessary shock.  
....charge in an environment where temperatures  
are within the tolerances shown in the chart  
below. This is a chemical reaction type  
battery—cooler temperatures impede chemical  
reaction, while warmer temperatures can  
prevent complete charging.  
2. Store cassettes . . .  
.... away from heaters or other heat sources.  
.... out of direct sunlight.  
.... where they won’t be subject to unnecessary  
shock or vibration.  
....store in a cool, dry place. Extended exposure  
to high temperatures will increase natural  
discharge and shorten service life.  
....fully charge and then fully discharge the  
battery every 6 months when storing the  
battery pack over a long period time.  
.... where they won’t be exposed to strong  
magnetic fields (such as those generated by  
motors, transformers or magnets).  
.... vertically, in their original cases.  
....remove from charger or powered unit when  
not in use, as some machines use current even  
when switched off.  
NOTES:  
It is normal for the battery pack to be warm after  
charging, or after use.  
Temperature Range Specifications  
Charging ............... 10°C to 35°C  
Operation ............. 0°C to 40°C  
Storage ................. –10°C to 30°C  
Recharging time is based on room temperature of  
20°C.  
The lower the temperature, the longer recharging  
takes.  
EN  
81  
5. Dirty heads can cause the following problems:  
Main Unit  
1. For safety, DO NOT . . .  
....open the camcorders chassis.  
....disassemble or modify the unit.  
....short-circuit the terminals of the battery pack.  
Keep it away from metallic objects when not in  
use.  
....allow inflammables, water or metallic objects  
to enter the unit.  
....remove the battery pack or disconnect the  
power supply while the power is on.  
....leave the battery pack attached when the  
camcorder is not in use.  
No picture and sound during playback (blue back  
screen).  
Blocks of noise appear during playback.  
During recording, the Head Clog Warning  
indicator “ ” appears.  
In such cases, use the optional Cleaning Cassette.  
Insert it and play back. If the cassette is used more  
than once consecutively, damage to the video  
heads may result. After the camcorder plays back  
for about 20 seconds, it stops automatically. Also  
refer to the Cleaning Cassette’s instructions.  
If, after using the Cleaning Cassette, the problems  
still exist, consult your nearest JVC dealer.  
Mechanical moving parts used to move the video  
heads and video tape tend to become dirty and  
worn out over time. In order to maintain a clear  
picture at all times, periodic check-ups are  
recommended after using the unit for about  
1,000 hours. For periodic check-ups please  
consult your nearest JVC dealer.  
2. Avoid using the unit . . .  
....in places subject to excessive humidity or dust.  
....in places subject to soot or steam such as near  
a cooking stove.  
....in places subject to excessive shock or  
vibration.  
....near a television set.  
....near appliances generating strong magnetic or  
electric fields (speakers, broadcasting anten-  
nas, etc.).  
....in places subject to extremely high (over 40°C)  
or extremely low (under 0°C) temperatures.  
3. DO NOT leave the unit . . .  
....in places of over 50°C.  
....in places where humidity is extremely low  
(below 35%) or extremely high (above 80%).  
....in direct sunlight.  
....in a closed car in summer.  
....near a heater.  
About moisture condensation . . .  
You have observed that pouring a cold liquid  
into a glass will cause drops of water to form  
on the glass‘ outer surface. This same  
phenomenon occurs on the head drum of a  
camcorder when it is moved from a cool  
place to a warm place, after heating a cold  
room, under extremely humid conditions or  
in a place directly subjected to the cool air  
from an air conditioner.  
Moisture on the head drum can cause severe  
damage to the video tape, and can lead to  
internal damage to the camcorder itself.  
4. To protect the unit, DO NOT . . .  
....allow it to become wet.  
....drop the unit or strike it against hard objects.  
....subject it to shock or excessive vibration  
during transportation.  
....keep the lens directed at extremely bright  
objects for long periods.  
....expose the lens to direct sunlight.  
....carry it by holding the viewfinder.  
....swing it excessively when using the hand strap  
or the grip.  
Serious malfunctioning  
....swing the soft camera case excessively when  
the camcorder is inside it.  
If malfunctioning occurs, stop using the unit  
immediately and consult your local JVC dealer.  
The camcorder is a microcomputer-controlled  
device. External noise and interference (from a  
TV, a radio, etc.) might prevent it from function-  
ing properly. In such cases, first disconnect its  
power supply unit (battery pack, AC Charger  
Station, etc.) and press the RESET button and  
then re-connect it and proceed as usual from  
the beginning.  
SPECIFICATIONS  
82  
EN  
Camcorder  
General  
Power  
: DC 6.3 V  
DC 7.2 V  
(using AC Charger Station)  
(using Battery)  
Power consumption  
Format  
: Approx. 6 W  
: DV Format (SD mode)  
Signal format  
: PAL Standard  
Video signal recording format  
Cassette  
: Digital Component Recording  
: MINI DV Cassette  
Tape Speed  
: SP: 18.8 mm/s  
LP: 12.5 mm/s  
Maximum recording time  
: SP: 60 min.  
LP: 90 min. (using M-DV60ME cassette)  
Pickup  
: 1/4" CCD  
Lens  
: F1.8, f = 3.6 to 36 mm, 10:1 Power Zoom Lens  
Filter diameter  
: ø27 mm (with the lens hood attached)  
ø25.5 mm (with the lens hood detached)  
Viewfinder  
: 0.55" colour LCD, 113,000 pixels  
: 0 to 40°C  
: 35 to 80%  
: –20 to 50°C  
: 45 (W) x 135 (H) x 81 (D) mm  
Operating temperature  
Operating humidity  
Storage temperature  
Dimensions  
(with the viewfinder pushed back in)  
Weight  
: Approx. 390 g (without cassette and battery)  
Approx. 480 g (incl. cassette and battery)  
Video  
Output  
: 1 Vp-p, 75unbalanced, analogue output  
(via ø3.5 mm AV output connector)  
DV output  
: 4-pin, IEEE1394 conformity, digital output  
Audio  
Output  
Headphone output  
External microphone input  
: –8 dBs, 1 kanalogue output (via ø3.5 mm AV output connector)  
: Stereo (via ø3.5 mm AV output connector)  
: –62 dBs, high impedance unbalanced with ø3.5 mm (stereo)  
EN  
83  
AC Charger Station  
General  
Power  
: AC 110 to 240 V`, 50/60 Hz  
Power consumption  
Output power  
: 20 W  
: DC 7.2 V , 0.77 A (charge)  
DC 6.3 V , 1.8 A (VTR)  
Operating temperature  
: 0°C to 40°C  
(when charging, 10°C to 35°C)  
: 80 mm (W) x 39 mm (H) x 146 mm (D)  
Dimensions  
Weight  
: Approx. 410 g  
Connectors  
S-Video  
: Y: 1Vp-p, 75 , analogue output  
C: 0.29 Vp-p, 75 , analogue output  
: 1Vp-p, 75 , analogue output  
: –8 dBs, 1 k, analogue output  
: ø3.5 mm, 4-pole, mini-head jack (compatible with RC-5325 plug)  
Video  
Audio  
JLIP  
Editing  
: ø3.5 mm diameter, 2-pole  
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications  
subject to change without notice.  
GLOSSARY OF TERMS  
84  
EN  
Iris  
Works like the pupil of the human eye. In a well-lit environment, the human pupil contracts to keep too  
much light from entering. In low lighting, the pupil dilates to allow more light in.  
Colour temperature  
A measurement in Kelvin degrees which indicates the colour contents of a light source; bluish light has a  
higher colour temperature than reddish light. To reproduce white as white under different types of lighting,  
the chrominance signal must be adjusted to match the light source’s colour temperature.  
(See “White Balance”.)  
AC Charger Station  
Used when charging the battery. Or, when connected directly to the camcorder, it can be used as a power  
supply.  
Auto focus  
Focus can be set for automatic adjustment, for beginners who find the adjustment difficult.  
On-screen display  
Displays in the viewfinder can be shown on a connected TV.  
Strobe  
In the early days of movie making, 1-second strobes were uncommon, so movies didn’t have the smooth  
movement they have today. This function gives movies the old-film flicker effect.  
Record-Standby  
Engage this mode by pressing START/STOP during Stop or Record modes. It means that the camcorder, or  
your VCR, is paused and ready to record.  
CCD (Charge coupled device)  
Solid-state imaging device used in camcorders as the camera’s image pickup; analogueous to the eye’s retina  
except that picture information is output as electric signals.  
Dew sensor  
If condensation forms inside the unit due to a temperature change, the indicator appears in the viewfinder,  
and the camcorder becomes unusable.  
Digital zoom  
10X Optical zoom image is taken and digitally processed to provide 40X or 100X magnified images.  
Digital Image Stabilizer  
When shooting while holding the camcorder in your hand, even if you think you’re perfectly still, there is  
slight movement. This function compensates for that movement.  
Fade  
An effect used in scene transitions. Like movies or TV, the scene gradually goes black or white (fade out), or  
comes in from a black or white screen (fade in).  
White balance  
A term that refers to the correctness of colour reproduction under various lighting. If the white balance is  
correct, all other colours will be accurately reproduced.  
Wipe  
An effect used in scene transitions. A scene disappears as though it’s being wiped off the screen (wipe out),  
or appears as though it’s wiped on (wipe in).  
INDEX  
EN  
85  
A
O
Animation ............................................... pg. 32  
Auto Focus.............................................. pg. 41  
Auto Shut off ........................................... pg. 19  
On-Screen Menus ......... pg. 28 – 33, 39, 49, 50  
Operation Mode ..................................... pg. 17  
P
B
P.AE/Effects.................................. pg. 39, 40, 49  
Picture Wipe/Dissolve............................. pg. 35  
Playback Menu ....................................... pg. 50  
Playback Zoom ....................................... pg. 48  
Power (AC/Battery).............................. pg. 9, 10  
Battery .................................................... pg. 8  
Battery Low ............................................. pg. 79  
Beep/Tally ............................................... pg. 32  
C
R
Charging ................................................. pg. 8  
Cinema ................................................... pg. 29  
Classic Film ............................................ pg. 40  
Cleaning The Camcorder ........................ pg. 73  
Connections .............................. pg. 10, 52 – 57  
Random Assemble Editing............... pg. 61 – 65  
Record Safety Tab ................................... pg. 12  
Record-Standby ...................................... pg. 18  
Recording Format ................................... pg. 6  
Recording Mode ..................................... pg. 13  
Recording Menu ............................. pg. 28 – 30  
Remote Control....................................... pg. 16  
D
Date/Time Display ............................ pg. 23, 51  
Date/Time Settings .................................. pg. 11  
Demonstration Mode .............................. pg. 32  
Digital Dubbing ...................................... pg. 59  
Digital Image Stabilizer ........................... pg. 30  
Digital Zoom .......................................... pg. 30  
Dubbing ........................................... pg. 58, 59  
S
Self-Timer ............................................... pg. 25  
Sepia ....................................................... pg. 40  
Set VCR Brand ........................................ pg. 60  
Shutter Speed .......................................... pg. 40  
Slow-motion playback ............................ pg. 47  
Slow Shutter ............................................ pg. 40  
Snapshot Mode ................................. pg. 26, 27  
Sound Mode ........................................... pg. 32  
Squeeze .................................................. pg. 29  
Still Playback .......................................... pg. 47  
Strobe ..................................................... pg. 40  
System Menu .................................... pg. 31, 32  
E
Editing .............................................. pg. 58, 59  
Exposure Control .................................... pg. 42  
F
5SD ........................................................ pg. 24  
5-Second Mode ...................................... pg. 24  
Fade-In/Out ............................................ pg. 34  
Focus Adjustment.................................... pg. 41  
T
Tapes ...................................................... pg. 12  
Time Code .......................................... pg. 5, 21  
Twilight ................................................... pg. 40  
G
Gain Up .................................................. pg. 30  
I
W
Indications ...................................... pg. 77 – 79  
Iris .......................................................... pg. 43  
Iris Lock .................................................. pg. 43  
White Balance .................................. pg. 44, 45  
Wide Mode ............................................. pg. 29  
Wind Cut ................................................ pg. 32  
Wipe In/Out ............................................ pg. 34  
L
Lithium-Ion Battery ............................. pg. 4, 80  
Loading A Tape ....................................... pg. 12  
M
Monotone ............................................... pg. 40  
Motor Drive Mode .................................. pg. 27  
MEMO  
MEMO  
VICTOR COMPANY OF JAPAN, LIMITED  
0P5ri9n8teHdOinV*JaUpNan*VP  
EK  
COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD.  

Audio Authority Car Audio System User Manual
Audiovox VOD285P User Manual
Casio FX 820MS User Manual
Casio Graphing Calculator FXCG10 User Manual
Cerwin Vega Car Speaker CVA 121 User Manual
Eclipse Fujitsu Ten Car Stereo System CD3424 User Manual
Hitachi SL 802 User Manual
Hitachi VM 1700A User Manual
Honeywell Boiler L91D User Manual
JVC Everio Digital Camcorder GZ EX555 User Manual