JVC Everio GZ MG680 User Manual

INSTRUCTIONS  
MANUEL D’UTILISATION  
EN FR  
HARD DISK CAMERA  
CAMÉSCOPE À DISQUE DUR  
Dear Customers  
U
GZ-MG680  
GZ-MG650  
GZ-MG630  
Thank you for purchasing this camcorder.  
Before use, please read the safety  
information and precautions contained  
in pages 2 and 3 to ensure safe use of  
this product.  
U
U
For Future Reference:  
Enter the Model No. (located on the  
bottom of the camcorder) and Serial No.  
(located on the battery pack mount of the  
camcorder) below.  
Model No.  
Serial No.  
Cher client,  
Nous vous remercions d’avoir acheté  
ce caméscope. Avant de commencer,  
veuillez lire les informations et les  
précautions de sécurité présentées dans  
les pages 2 et 3 pour utiliser cet appareil  
en toute sécurité.  
Pour consultation ultérieure:  
Noter ci-dessous le N° de modèle  
(figurant sous le caméscope) et le N° de  
série (sur le logement de la batterie du  
caméscope).  
Please read the instruction manual prior to  
connecting or operating this product.  
Veuillez lire le mode d’emploi avant de  
connecter ou utiliser ce produit.  
N° de modèle  
N° de série  
PLEASE DO NOT IMMEDIATELY RETURN THIS  
PRODUCT TO YOUR PLACE OF PURCHASE.  
ASSISTANCE IN PRODUCT HOOK-UP AND USE  
STOP  
IS AVAILABLE AT:  
VEUILLEZ NE PAS RETOURNER IMMÉDIATEMENT  
CE PRODUIT À LENDROIT D’ACHAT D’ORIGINE.  
DE LAIDE POUR LA CONFIGURATION ET  
ENGLISH  
FRANÇAIS  
ARRÊT  
LUTILISATION DU PRODUIT EST DISPONIBLE À:  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
Remember that this camcorder is intended for  
private consumer use only.  
Any commercial use without proper permission  
is prohibited. (Even if you record an event such  
as a show, performance or exhibition for personal  
enjoyment, it is strongly recommended that you  
obtain permission beforehand.)  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9. Only use attachments/accessories specified by the  
manufacturer.  
10.Use only with the cart,  
stand, tripod, bracket,  
or table specified by  
the manufacturer, or  
Trademarks  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
HDMI is a trademark of HDMI  
Licensing, LLC.  
Windows® is either registered  
trademark or trademark of Microsoft Corporation  
in the United States and/or other countries.  
Macintosh is a registered trademark of Apple Inc.  
iTunes is a trademark of Apple Inc registered in  
the U.S. and other countries.  
sold with the apparatus.  
When a cart is used,  
YouTube and the YouTube logo are trademarks  
and/or registered trademarks of YouTube LLC.  
Other product and company names included in  
this instruction manual are trademarks and/or  
registered trademarks of their respective holders.  
use caution when  
moving the cart/  
apparatus combination  
to avoid injury from tip-over.  
11.Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
12.Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture,  
does not operate normally, or has been dropped.  
If this symbol is shown, it is only valid  
in the European Union.  
SAFETY2  
EN  
3
Easy Start Guide  
Charge the battery before recording  
Turn off the camcorder and attach the battery pack.  
Access lamp  
blinks: Accessing files  
Power/charge lamp  
blinks: Charging  
goes out: Charging finished  
Do not remove the  
AC adapter, the  
battery pack or the  
microSD card when  
the lamp is blinking.  
Open the cover  
The battery pack is not  
charged at the time of  
purchase.  
Battery Pack  
AC Adapter  
To AC Outlet  
(110V to 240V)  
CAUTION  
Be sure to use JVC battery packs. If you use any other battery packs besides  
JVC battery packs, safety and performance can not be guaranteed.  
Grip Adjustment  
Adjust the strap and fasten.  
Grip Strap  
Fasten the strap when you grip the  
camcorder.  
When carrying the camcorder,  
please be careful not to drop it.  
Fasten  
4
EN  
Select the city closest to  
the area where you use  
the camcorder  
Date/Time Setting  
T
Open the LCD monitor to  
Qturn on the camcorder  
Power button  
LCD monitor  
Select [ON] if daylight  
Usaving time is effective  
Select [YES] within  
R10 seconds  
Slide your finger up and down on the  
sensor. Then touch OK.  
Set the date and time  
V
Touch sensor: Sets the date and time  
: Moves the cursor to the right  
OK: Clock starts  
When the message disappears, press the  
&
power button for at least 2 seconds to turn  
off the power, and then press it again for at  
least 2 seconds.  
Touch the sensors with your finger. The  
sensors do not function if you touch them  
with your finger nail or with gloves on.  
Select [CLOCK SETTING]  
S
EN  
5
Video recording  
CAUTION  
Before recording an important scene, it is recommended to conduct a trial  
recording.  
Slide the mode switch to select ! (video) mode  
Q
Select recording mode  
R
The mode changes when  
you press the button.  
The auto recording  
indicator appears.  
Start recording  
S
Remaining space on  
the hard disk  
Record-standby  
Video Quality  
Press the START/STOP  
button to start recording,  
and press it again to stop.  
Recording  
6
EN  
Playing back  
Select playback mode  
Q
The mode changes when  
you press the button.  
Select the desired file  
R
S
Index screen  
Select  
(Touch OK)  
F
Playback screen  
To perform operations such as forward search or reverse search (p. 22)  
To view files on TV (p. 25)  
CAUTION  
Do not forget to make copies after recording!  
To copy files onto DVD discs (p. 27)  
To dub files to a VCR/DVD recorder (p. 34)  
To play back a created disc (p. 28)  
To edit files on your computer (p. 29)  
EN  
7
Contents  
GETTING STARTED  
EDITING  
Accessories ............................................10  
Preparing the Remote Control...................... 11  
Attaching the Core Filter to the USB Cable... 11  
Managing Files........................................26  
Capturing a Still Image from a Video............ 26  
Deleting Files................................................ 26  
Index ........................................................12  
Tripod Mounting............................................ 13  
COPYING  
Indications on LCD Monitor...................14  
Copying Files..........................................27  
Using a DVD Burner..................................... 27  
Creating a DVD using a PC.......................... 29  
Dubbing Files to a VCR/DVD Recorder........ 34  
Necessary Settings before Use.............16  
Charging the Battery Pack............................ 16  
Date/Time Setting......................................... 16  
Language Setting ......................................... 17  
Using with a Portable Media Player ......35  
Turning on the Export Mode ......................... 35  
Changing the Export Setting ........................ 35  
Transferring the Files to PC.......................... 35  
Other Settings.........................................18  
Using a microSD Card.................................. 18  
RECORDING/PLAYBACK  
Uploading Files to Websites..................36  
Turning on the Upload Mode ........................ 36  
Uploading Files............................................. 36  
Recording Files.......................................19  
Video Recording........................................... 19  
Still Image Recording ................................... 20  
Zooming........................................................ 21  
LED Light...................................................... 21  
Checking the Remaining Battery Power....... 21  
Checking the Remaining Space on the  
FURTHER INFORMATION  
Changing the Menu Settings.................37  
Troubleshooting......................................37  
Warning Indications ...............................39  
Specifications .........................................40  
Cautions ..................................................42  
Terms.......................................................44  
Recording Media......................................... 21  
Playing Back Files..................................22  
Video Playback ............................................ 22  
Still Image Playback ..................................... 23  
Manual Recording ..................................24  
Changing to Manual Recording Mode.......... 24  
Backlight Compensation............................... 24  
Manual Setting in Menu................................ 24  
USING WITH TV  
Viewing Files on TV ................................25  
Connection with TV....................................... 25  
Playback Operation ...................................... 25  
8
EN  
How to use theTouch Sensor  
Read This First!  
After the menu is displayed on the LCD monitor:  
Make a backup of important recorded data  
It is recommended to copy your important  
recorded data to a DVD or other recording  
media for storage. JVC will not be responsible  
for any lost data.  
Make a trial recording  
Before the actual recording of important data,  
make a trial recording and play back the  
recorded data to check that the video and  
sound have been recorded correctly.  
Reset the camcorder if it does not operate  
correctly  
Close the LCD monitor and remove the  
power supply (battery pack or AC adapter)  
from the camcorder, then reattach it.  
Q
Slide your finger up and down on the sensor.  
RSelect [SET]. (Touch OK.)  
Precautions on handling batteries  
Be sure to use the JVC BN-VF808U/  
VF815U/VF823U battery packs. This product  
includes patented and other proprietary  
technology and is made to be used with the  
JVC battery and not with other batteries.  
JVC cannot guarantee safety or  
performance of this product when it is  
operated by other batteries.  
If the camcorder is subjected to electrostatic  
discharge, turn off the power before using it  
again.  
A
B
To select an on-screen button appearing on  
the left side, touch the portion of the sensor  
next to the on-screen button.  
To select an on-screen button appearing at  
the bottom of the screen, touch the buttons  
underneath them.  
If a malfunction occurs, stop using the  
camcorder immediately and contact  
Recorded data may be erased while the  
camcorder is being repaired or inspected.  
Back up all data before requesting repairs or  
inspections.  
Read these INSTRUCTIONS  
to enjoy your CAMCORDER.  
For more details on the  
operations, refer to the  
GUIDEBOOK in the supplied  
CD-ROM.  
Because camcorders may be used  
for demonstration in a shop, the  
demonstration mode is set to on by default  
To deactivate the demonstration mode, set  
[DEMO MODE] to [OFF].  
In order to view the GUIDEBOOK, Adobe®  
Acrobat® ReaderTM or Adobe® Reader®  
must be installed.  
Adobe® Reader® can be loaded from  
Adobe’s web site:  
NOTE  
Select your desired language with a single click.  
The model name is indicated on the bottom of your  
camcorder.  
EN  
9
GETTING STARTED  
Accessories  
BN-VF808U  
AP-V20U  
AC Adapter  
Battery Pack  
AV Cable  
CD-ROM  
USB Cable  
Core Filter  
CR2025  
RM-V751U  
Remote Control  
Lithium Battery  
Pre-installed in the  
remote control.  
NOTE  
Make sure to use the provided cables for connections. Do not use any other cables.  
10 EN  
Preparing the Remote Control  
A battery is included inside the remote control at the time of purchase.  
Remove the insulation sheet before use.  
Beam Effective Area  
To Reinsert the Battery  
Pull out the battery holder by pressing the lock  
tab.  
Remote Sensor  
Lock Tab  
Lithium Battery  
(CR2025)  
Effective distance:  
Max. 5 m (16 ft)  
NOTE  
The transmitted beam may not be effective  
or may cause incorrect operation when the  
remote sensor is directly exposed to sunlight  
or powerful lighting.  
Attaching the Core Filter to the USB Cable  
The core filter reduces interference caused when connecting to other devices. Connect the end of  
the cable with the core filter to the camcorder.  
Release the stopper.  
3 cm (1-3/16")  
Wind once.  
To be connected to  
the camcorder  
EN 11  
Index  
NOTE  
Be careful not to cover 1, 2, 3, and 4  
during shooting.  
The LCD monitor can rotate 270°.  
12 EN  
Camcorder  
Remote Control  
Q Infrared Beam Transmitting Window  
R ZOOM (T/W) Buttons (Zoom in/Out)  
S Up Button  
! Power Button  
GZ-MG680  
#
HDMI Mini Connector (p. 25)  
$ DISPLAY Button (p. 15)  
% Speaker  
T Skip Backward Button  
& Zoom Lever (p. 21)  
Speaker Volume Control  
( SNAPSHOT Button (p. 20)  
U Left Button  
V Back Button  
W PLAYLIST Button  
X START/STOP Button  
) Touch Sensor  
* OK Button  
+ MENU Button  
Y S.SHOT(SNAPSHOT) Button  
Z INFO Button  
a Skip Forward Button  
b PLAY/PAUSE/SET Button  
, Mode Switch [!, #]  
- UPLOAD Button (p. 36)  
TITLE Button  
c Right Button  
d Next Button  
e Down Button  
f INDEX Button*  
g DISP Button  
. EXPORT Button (p. 35)  
/ DIRECT DVD Button (p. 28)  
INFO Button (p. 21)  
0 PLAY/REC Button (p. 19, 20, 22, 23)  
1 LED Light (p. 21)  
2 Remote Sensor  
3 Lens  
* Each time you press INDEX, the screen  
switches as shown below:  
! mode:  
Index Screen « Group Index Screen  
# mode:  
4 Stereo Microphone  
Index Screen « Date Index Screen  
5 DC Connector  
6 START/STOP Button (p. 19)  
7 AV Connector (p. 25, 34)  
8 USB Connector (p. 27, 30)  
Tripod Mounting  
Align the camcorder stud hole with the tripod  
stud, and the mounting socket with the screw,  
9 Tripod Mounting Socket  
: microSD Card Slot  
; Battery Release Button  
and then rotate the camcorder clockwise to  
mount it to the tripod.  
NOTE  
Do not use a tripod on unsteady or unlevel  
surfaces. It could tip over, causing serious  
damage to the camcorder.  
EN 13  
Indications on LCD Monitor  
During both Video and Still Image  
Recording  
During Video Recording Only  
NOV. 1. 2009 4:55 PM  
! Mode Indicator  
# EXPORT Mode Indicator (p. 35)  
$ Counter  
% Upload Mode Indicator (p. 36)  
! Selected Recording Mode Indicator  
(p. 24)  
: Auto Mode  
@
GZ-MG680 GZ-MG650  
Indicator  
:
Analog Input  
A
3: Manual Mode  
# Effect Mode Indicator  
& Video Quality:  
(ULTRA FINE), (FINE),  
B
C
$ Tele Macro Mode Indicator  
% LED Light Indicator (p. 21)  
& Scene Select Indicator  
( Zoom Indicator (p. 21)  
) Recording Medium Indicator  
* Drop Detection Indicator (Appears when  
[DROP DETECTION] is set to [OFF].)  
+ White Balance Indicator  
(NORMAL),  
(ECONOMY)  
D
E
( Remaining Time  
)
REC: (Appears during recording.)  
: (Appears during record-standby  
mode.)  
M
MQ  
* Digital Image Stabilizer (DIS) Indicator  
(Appears when [DIS] is set to [OFF].)  
+ Shooting Indicator (p. 19)  
, Wind Cut Indicator  
, Monitor Backlight Indicator  
- Battery Indicator  
. Date/Time (p. 16)  
- Event Indicator  
/ Manual Focus Adjustment Indicator  
0 Backlight Compensation Indicator (p. 24)  
1 Brightness Control Indicator  
.: Photometry Area Control Indicator  
2 Shutter Speed  
During Still Image Recording Only  
! Mode Indicator  
# Focus Indicator (p. 20)  
$ Image Quality: FINE (fine) or  
(standard)  
STD  
% Remaining Number of Shots  
& Shooting Indicator (p. 20)  
( Shutter Mode Indicator  
) Self-Timer Indicator  
14 EN  
During Video Playback  
During Still Image Playback  
8
NOV. 1. 2009  
4:55 PM  
NOV. 1. 2009  
4:55 PM  
! Mode Indicator  
# Playlist Playback Indicator (Appears when  
playing back a playlist.)  
! Mode Indicator  
# Quick Review Indicator (p. 20)  
$ Folder/File Number  
$ Quick Review Indicator (p. 19)  
% Slide Show Playback Indicator  
& Battery Indicator  
( Date/Time (p. 16)  
% Video Quality:  
(ULTRA FINE),  
(ECONOMY)  
(FINE),  
B
C
(NORMAL),  
D
E
GZ-MG680  
Output with 1080p  
& Counter  
)
( Playback Mode  
Playback  
Pause  
Forward Search  
Reverse Search  
Forward Slow-Motion  
Reverse Slow-Motion  
:
:
:
:
F
Q
K
J
:
:
QF  
PQ  
(The number on the left shows speed.)  
) Battery Indicator  
* Date/Time (p. 16)  
+ Volume Level Indicator  
Switching indication modes on LCD  
monitor  
GZ-MG680  
,
Output with 1080p  
Each time you touch DISPLAY, indications  
on LCD monitor switch as shown below;  
In recording mode:  
All indications/Indications for selected  
functions  
In playback mode:  
All indications/Only date and time/No  
indications  
EN 15  
Necessary Settings before Use  
To detach the battery pack  
Charging the Battery Pack  
1 Close the LCD monitor to turn off the  
camcorder.  
2 Attach the battery pack, then connect  
the AC adapter.  
NOTE  
You can also use the camcorder with just the  
AC adapter.  
The actual recording time may shorten  
depending on the recording environment,  
such as when recording scenes with fast  
moving subject.  
Please do not pull or bend the AC adapter  
plug and cable. This may damage the AC  
adapter.  
AC Adapter  
To AC Outlet  
(110V to 240V)  
The power/charge lamp blinks to  
indicate charging has started.  
When the lamp goes out, charging is  
finished.  
Date/Time Setting  
1 Open the LCD monitor to turn on the  
To check the remaining battery power  
See page 21.  
camcorder.  
2 Touch MENU.  
Battery pack  
BN-VF808U  
Charging time  
1 h 50 m  
3 Select [DISPLAY SETTINGS].  
(Provided)  
BN-VF815U  
2 h 40 m  
BN-VF823U  
3 h 40 m  
4 Select [CLOCK ADJUST].  
16 EN  
5 Select [CLOCK SETTING].  
6 Select the city closest to the area you  
are traveling.  
6 Select the city closest to the area  
To return to the previous screen  
Select @.  
where you use the camcorder.  
Selected area is highlighted  
To quit the screen  
Select [QUIT].  
Principal city of the  
selected area  
Time difference to  
GMT  
Language Setting  
The language on the display can be changed.  
7 Select [ON] if daylight saving time is  
effective.  
1 Open the LCD monitor to turn on the  
camcorder.  
2 Touch MENU.  
3 Select [DISPLAY SETTINGS].  
8 Set the date and time.  
Change the setting by using the touch  
sensor and select [ ] to set.  
&
4 Select [LANGUAGE].  
9 Select [SAVE].  
To reset the setting, select [QUIT].  
Setting the clock to local time when  
traveling  
5 Select the desired language.  
To return to the previous screen  
Select @.  
After performing steps 1-4 (p. 16)  
To quit the screen  
Select [QUIT].  
5 Select [AREA SETTING].  
EN 17  
Other Settings  
To remove a microSD card  
Push the microSD card once.  
Using a microSD Card  
After the card comes out a little, pull it out.  
The camcorder is programmed to record on  
the built-in hard disk when it is shipped from  
the factory.You can change the recording  
medium to microSD card.  
NOTE  
Insert and remove the microSD card only  
while the power is turned off. Otherwise, data  
on the card may be corrupted.  
Do not touch the terminal on the reverse side  
of the label.  
Operations are confirmed on the following  
microSD cards.  
- Panasonic  
- TOSHIBA  
- SanDisk  
- ATP  
Video recording:  
Change the recording medium  
Set [REC MEDIA FOR VIDEO] and [REC  
MEDIA FOR IMAGE] to [SD].  
Class 4 or higher compatible microSDHC  
card (4 GB to 8 GB)  
Still image recording:  
microSD card (256 MB to 2 GB) or  
microSDHC card (4 GB to 8 GB)  
If other media are used, they may fail to  
record data correctly, or they may lose data  
that had already been recorded.  
MultiMediaCards are not supported.  
Format a microSD card when using it for  
the first time  
Insert a microSD card  
Preparation:  
Close the LCD monitor to turn off the  
camcorder.  
Select [FORMAT SD CARD] to format the  
card.  
1 Open the microSD card cover.  
2 Firmly insert the card with its clipped  
edge first.  
3 Close the microSD card cover.  
18 EN  
RECORDING/PLAYBACK  
Recording Files  
Video Recording  
Slide the mode switch to select  
! (video) mode.  
Press PLAY/REC to select the  
recording mode.  
SNAPSHOT  
Press START/STOP to start  
recording.  
Approximate remaining  
time for recording  
You can also start/stop recording by  
selecting [REC] on the LCD monitor.  
(On-screen recording control)  
To stop recording  
Press START/STOP again.  
To change the video quality  
Change the settings in [VIDEO QUALITY].  
To view the last recorded scene  
Select while recording is paused.  
To change the aspect ratio of the image  
(16:9/4:3)  
Change the settings in [SELECT ASPECT  
RATIO].  
A
Selecting $ during playback deletes that  
scene.  
To record a still image during video  
recording  
Press SNAPSHOT.  
NOTE  
The video recording mode is automatically selected when you turn off the camcorder and then  
turn on again.  
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off  
automatically to conserve power.  
Do not move or shake the camcorder suddenly during recording.  
If you do so, the driving sound (hum) of the hard disk may be recorded.  
EN 19  
Recording Files (Continued)  
Still Image Recording  
Slide the mode switch to select  
# (still image) mode.  
Press PLAY/REC to select the  
recording mode.  
Press and hold SNAPSHOT  
halfway.  
The ? indicator becomes green when  
the captured image is focused.  
Press SNAPSHOT fully to take a  
still image.  
To view the last recorded image  
Select  
after shooting.  
A
Selecting $ during playback deletes that  
image.  
To change the image quality  
Change the settings in [IMAGE QUALITY].  
To record still images continuously  
Set to [CONTINUOUS SHOOTING] in  
[SHUTTER MODE].  
NOTE  
DIS (Digital Image Stabilizer) does not function during still image recording.  
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off  
automatically to conserve power.  
20 EN  
Checking the Remaining Battery  
Power  
Zooming  
Preparation:  
Select ! or # mode.  
! mode:  
Select the recording mode.  
Press INFO twice or INFO and then select  
.
;
Zoom out  
Zoom in  
# mode:  
Press INFO.  
W: Wide angle  
T: Telephoto  
You can also zoom out/zoom in by selecting  
[W] or [T] on the LCD monitor. (On-screen  
zoom control)  
To quit the screen  
Select [QUIT] or press INFO.  
Zoom ratio (factory-preset)  
! mode  
[80X/DIGITAL]  
# mode  
[35X/OPTICAL]  
NOTE  
The recordable time display should only be  
used as a guide. It is displayed in 10 minute  
units.  
To change the maximum zoom ratio  
(! mode only)  
Checking the Remaining Space on  
the Recording Media  
Change the settings in [ZOOM].  
NOTE  
Macro shooting is possible as close as approx.  
5 cm (2") to the subject when the zoom lever is  
set all the way to W.  
Preparation:  
Select ! mode.  
Select the recording mode.  
Press INFO.  
LED Light  
Preparation:  
Select ! or # mode.  
Select the recording mode.  
1 Touch MENU.  
The maximum recording time is displayed for  
each video quality mode.  
2 Select [LIGHT].  
To change the video quality  
1) Select the video quality.  
2) Select [SET].  
3 Select the desired setting.  
The LED light remains on  
regardless of the surrounding  
conditions.  
ON  
To quit the screen  
Select [QUIT].  
The LED light turns on  
automatically when shooting in  
insufficient light conditions.  
AUTO  
OFF  
Deactivates this function.  
EN 21  
Playing Back Files  
Video Playback  
Press PLAY/REC to select the  
playback mode.  
Slide the mode switch to select !  
(video) mode.  
The index screen appears.  
Select the desired file.  
To move to the previous or next page  
Touch [ ] or [ ] for over a second.  
To play back a few seconds from the  
beginning of each video  
To delete a video  
Select $ when playback is stopped.  
To change the number of thumbnails  
(6 thumbnails/20 thumbnails)  
Touch [  
].  
Move the zoom lever to [W].  
Operations during Video Playback  
Speaker volume  
On-screen buttons  
Return to the first scene of the file  
Go to the first scene of the next file  
Return to the index screen  
:
:
:
:
:
N
O
L
J
E
: Turn down the  
volume  
Reverse search (during playback)  
Frame-by-frame playback in reverse  
direction (during pause)*  
Playback  
:
:
:
:
F
Q
K
G
Pause  
Forward search (during playback)  
Frame-by-frame playback in forward  
direction (during pause)*  
* Slow playback starts when you keep touching the  
sensor button under for a while.  
+ : Turn up the  
/
E G  
volume  
22 EN  
Still Image Playback  
Press PLAY/REC to select the  
playback mode.  
Slide the mode switch to select #  
(still image) mode.  
The index screen appears.  
Select the desired file.  
To move to the previous or next page  
Touch [ ] or [ ] for over a second.  
To delete a still image  
Select $.  
To change the number of thumbnails  
(6 thumbnails/20 thumbnails)  
Move the zoom lever to [W].  
Operations during Still Image Playback On-screen buttons  
Change playback order of slide show in reverse direction  
Change playback order of slide show in forward direction  
Return to the index screen  
Display the previous file  
Start the slide show  
:
:
:
:
:
:
:
P
F
L
N
F
Q
O
End the slide show  
Display the next file  
EN 23  
Manual Recording  
Manual recording mode enables you to set the  
focus and screen brightness, etc. manually.  
Manual Setting in Menu  
In the manual recording mode:  
Changing to Manual Recording Mode  
Preparation:  
1 Touch MENU.  
2 Select [MANUAL SETTING].  
Select ! or # mode.  
Select the recording mode.  
Select [A/M] twice.  
3 Select the desired menu.  
To return to the auto recording mode  
Select [A/M] so that the 4 indicator  
appears.  
Backlight Compensation  
4 Select the desired setting.  
Backlight compensation brightens the subject  
by increasing the exposure.  
In the manual recording mode:  
Select -.  
Depending on the kind of settings you  
select, you can set the value by using the  
touch sensor.  
To return to the previous screen  
Select  
.
@
To quit the screen  
Select [QUIT].  
To cancel backlight compensation  
Select - again.  
NOTE  
If the LCD monitor is turned upside down, - is  
not displayed. Change the setting when the  
LCD monitor is in the normal position.  
24 EN  
USING WITH TV  
Viewing Files on TV  
This camcorder is designed to be used with  
high-definition or NTSC-type color television  
signals. It cannot be used with a television of a  
different standard.  
Preparation: Turn off all units.  
DC Connector  
HDMI Mini Connector  
Connection with TV  
You can output videos from the AV connector  
or the HDMI mini connector.  
To connect using the AV connector  
Preparation:  
AC Adapter  
GZ-MG680 GZ-MG650  
Set [SWITCH TO  
ANALOG I/O] to [OUTPUT].  
Turn off all units.  
HDMI Cable (optional)  
(Mini to full-sized HDMI cable)  
DC Connector  
AC Adapter  
AV Connector  
To AC Outlet  
HDMI Connector  
NOTE  
When connecting to the HDMI cable, the  
image or sound may not appear on the TV  
properly depending on the TV connected.  
In such cases, perform the following  
operations.  
AV Cable  
To AC Outlet  
1) Disconnect the HDMI cable and connect  
it again.  
2) Turn off and on the camcorder again.  
Playback Operation  
After the connection with TV is completed  
1 Turn on the camcorder and the TV.  
2 Set the TV to its VIDEO mode.  
AV Input Connector  
3 (Only when connecting the camcorder to  
GZ-MG680  
mini connector  
To connect using the HDMI  
the VCR/DVD recorder)  
We recommend using the Category 2 HDMI  
cable (High Speed cable).  
Turn on the VCR/DVD recorder, and  
set the VCR/DVD recorder to its AUX  
input mode.  
4 Start playback on the camcorder.  
(p. 22, 23)  
EN 25  
EDITING  
Managing Files  
CAUTION  
Deleting Files  
Do not remove the recording medium or  
perform any other operation (such as turning  
off the power) while accessing files. Also,  
be sure to use the provided AC adapter, as  
the data on the recording medium may be  
corrupted if the battery becomes exhausted  
during operation. If the data on the recording  
medium becomes corrupted, format the  
recording medium to use the medium again.  
Protected files cannot be deleted. To delete  
them, release the protection first.  
Once files are deleted, they cannot be  
restored. Check files before deleting.  
Preparation:  
Select ! or # mode.  
Select the playback mode.  
1 Touch MENU.  
Capturing a Still Image from a Video  
2 Select [DELETE].  
You can capture the desired scene from a  
recorded video, and store it as a still image.  
Preparation:  
Select ! mode.  
Select the playback mode.  
Press SNAPSHOT when playback is  
paused.  
3 Select [CURRENT].  
NOTE  
Captured still images are stored at a  
4 Select [YES].  
resolution of 640 x 360 (if the video was  
recorded in 16:9) or 640 x 480 (if the video  
was recorded in 4:3). The image can be  
elongated in the horizontal or vertical  
directions depending on the quality of the  
source video file.  
The continuous shooting function cannot be  
used to capture images.  
You cannot capture video during playback.  
You can select the previous or next file by  
selecting { or }.  
To quit the screen  
Select [QUIT].  
26 EN  
COPYING  
Copying Files  
Types of Copying and Connectable Device  
Using a DVD Burner  
The Camcorder  
You can copy files between  
the HDD and microSD card  
with this camcorder alone.  
Supported discs: 12cm DVD-R, DVD-RW  
Regarding DVD-R discs, only unused DVD-R  
discs can be used. Regarding DVD-RW discs,  
used DVD-RW discs can also be used, but  
they need to be formatted before recording.  
Formatting a disc deletes all content recorded on  
the disc up until that time.  
DVD Burner  
(CU-VD50/CU-VD3)  
You can copy files recorded  
on this camcorder onto DVD  
discs.  
Dual-layer discs cannot be used.  
Regarding finalization after copying  
The disc is automatically finalized so that it can be  
played on other devices. After finalizing, the disc is  
a play-only disc, so no more files can be added.  
PC  
You can copy files from the  
camcorder to a DVD using  
a PC.  
Connection with a DVD Burner  
Preparation:  
Turn on the camcorder first, then turn on the  
DVD burner.  
VCR/DVD Recorder  
DC Connector  
USB Connector  
You can dub video recorded  
on this camcorder onto  
VCR/DVD recorder.  
NOTE  
It is recommended to use the JVC DVD burner  
(CU-VD50/CU-VD3). When using CU-VD20 or  
CU-VD40, the recording time may take approx.  
2 times longer than the time that is described  
in the instruction manual of DVD burner.  
AC Adapter  
USB Cable*  
To AC Outlet  
DVD Burner  
USB Connector  
NOTE  
Refer also to the optional DVD burner’s  
instruction manual.  
* Use the USB cable that came with the DVD  
burner.  
EN 27  
Copying Files (Continued)  
Backup All Files  
Copying Video Files that Have Never  
Been Copied  
Preparation:  
Connect the camcorder to the DVD burner.  
Select ! mode.  
Files that have never been copied to the DVD  
discs are automatically selected and copied.  
1 Select [CREATE FROM ALL].  
1 Open the LCD monitor to turn on the  
camcorder.  
2 Press DIRECT DVD.  
2 Select the desired menu.  
3 Select [EXECUTE].  
[ALL SCENES]:  
All files in the recording medium are  
copied.  
[UNSAVED SCENES]:  
The DVD disc begins to be created.  
When [COMPLETED] appears, touch  
OK.  
Files that have never been copied to a  
DVD disc are automatically selected and  
copied.  
When [INSERT NEXT DISC PRESS  
3 Select the desired disc number.  
[STOP] TO EXIT CREATE] appears,  
change the disc. Remaining files are  
copied on the second disc.  
To cancel the DVD creation, select  
[CANCEL].  
To quit the screen  
1) Select [QUIT].  
2) When [QUIT?] appears, select [YES].  
If you select [ALL], all discs in the list are  
created.  
To preview scenes, select [CHECK].  
mark shows that the disc is created  
already.  
To play back the created disc using the  
camcorder  
1) Connect the camcorder to the DVD  
burner.  
2) Turn on the camcorder first, then turn on  
the DVD burner.  
4 Select [YES] or [NO].  
[YES]: Displays the thumbnails by group.  
[NO]: Displays the thumbnails by date.  
3) Select [PLAYBACK].  
4) Select the desired folder.  
5) Select the creation date of the disc.  
6) Select the desired file. To return to the  
previous screen, select @.  
5 Select [EXECUTE].  
The files are copied on the disc. When  
[COMPLETED] appears, touch OK.  
When [INSERT NEXT DISC PRESS  
[STOP] TO EXIT CREATE] appears,  
change the disc. Remaining files are  
copied on the second disc.  
To cancel copying, select [STOP].  
28 EN  
Preparation:  
Creating a DVD using a PC  
Load the provided CD-ROM into the PC.  
In Windows Vista, the auto play dialog box  
appears.  
Please read the “JVC SOFTWARE LICENCE  
AGREEMENT” in the CD-ROM instruction  
before you install software.  
You can copy the data from the camcorder and  
create a DVD using a PC.  
1 Click [Easy Installation].  
Installing the software to the PC  
Q
System Requirements  
Windows Vista  
Follow the on-screen instructions.  
OS: Windows Vista®  
2 Click [Next].  
Home Basic (SP1)  
Home Premium (SP1)  
(32-bit, pre-installed)  
CPU: Either one of the following:  
Intel® Pentium® 4, 1.6 GHz or higher  
Intel® Pentium® M, 1.4 GHz or higher  
Intel® CoreTM Duo, 1.5 GHz or higher  
RAM: At least 1 GB  
3 Click [Finish].  
Windows XP  
OS: Windows® XP  
Home Edition (SP2/SP3)  
Professional (SP2/SP3)  
(pre-installed)  
CPU: Either one of the following:  
Intel® Pentium® 4, 1.6 GHz or higher  
Intel® Pentium® M, 1.4 GHz or higher  
Intel® CoreTM Duo, 1.5 GHz or higher  
Everio MediaBrowser icon is created on the  
desktop.  
RAM: At least 512 MB  
To check the PC specification  
Right-click on [Computer] (or [My  
Computer]) in the [Start] menu and select  
[Properties].  
To see the Instruction Guide for Everio  
MediaBrowser  
1) Double-click the icon of the Everio  
MediaBrowser.  
NOTE  
Make sure your PC has a recordable DVD  
drive.  
If your system does not meet the  
requirements, it is recommended to copy  
2) Click [Help], and click [MediaBrowser Help].  
Click  
Click  
files using the DVD burner. (p. 27)  
Macintosh users may use the software  
included with their Macintosh (iMovie ’08,  
iPhoto) to copy files to their computer.  
EN 29  
Copying Files (Continued)  
Making Backup on the PC  
R
3 Click [All volume in camcorder] and  
click [Next].  
Preparation:  
Install the software to the PC.  
Make sure that enough free space is left in  
the PC’s HDD.  
Close the LCD monitor to turn off the  
camcorder.  
USB Connecter  
4 Click [Start].  
Backup starts.  
USB Cable  
To disconnect the camcorder from the  
PC  
1) Right-click the icon (Safely Remove  
Hardware) on the task bar and select  
[Safely remove USB Mass Storage  
Device].  
2) Follow the on-screen instructions and  
make sure that the device can be safely  
removed.  
USB Connecter  
3) Disconnect the USB cable and close the  
LCD monitor.  
1 Open the LCD monitor to turn on the  
camcorder.  
NOTE  
It takes time to back up many videos.  
2 Select [BACK UP].  
Everio MediaBrowser starts on the PC.  
30 EN  
Making User Lists to Arrange the  
Files  
S
5 Double-click the recording date.  
You can make a user list of a certain subject  
(such as Travel, Athletic meet) and put the files  
related to the subject into the user list.  
Preparation:  
Make backup on the PC.  
The files recorded on the day are displayed.  
1 Double-click the icon and open the  
calendar.  
6 Drag the file and drop into the user  
list.  
2 Select [Movies only].  
To add other files into the user list, repeat  
steps 5 and 6.  
3 Click [+].  
4 Input the name of the new user list  
and click [OK].  
EN 31  
Copying Files (Continued)  
Copying Files to a DVD  
T
4 Input the disc name, select the top  
menu style and click [Next].  
Preparation:  
Use a recordable DVD disc. (It is  
recommended to use a DVD-R disc.)  
1 Select the user list and click [Create  
Disc].  
5 Click [Start].  
2 Click [Select files individually] and  
click [Next].  
To add all the files onto DVD discs, click  
[Select all files displayed], then go to  
step 4.  
NOTE  
For detail on operating Everio MediaBrowser,  
click [Help] and refer to [MediaBrowser Help].  
Adobe® Reader® must be installed to read  
[MediaBrowser Help]. Adobe® Reader® can  
be loaded from Adobe’s web site:  
For assistance in operating the provided  
software, refer to the support information.  
(p. 33)  
3 Drag the file, and drop into the part at  
the bottom and click [Next].  
32 EN  
Folder Structure and Extensions  
Recording medium  
X = number  
[DCIM]  
Contains the still image folders.  
Contains the video file folders.  
[XXXJVCSO]  
[SD_VIDEO]  
[MGR_INFO]  
[PRGXXX]  
Management information* for the media as a whole  
[PRGXXX.PGI]  
[MOVXXX.MOD]  
[MOVXXX.MOI]  
Management information*  
Video file  
Management information* for the video files  
[PRGXXX]  
[EXTMOV]  
[MOV_XXX.MOD]  
Video file which management information is corrupted.  
Demo video file  
[DEM_XXX.MPG]  
[PRIVATE]  
Contains management information files of event and/or DVD  
creation information for the files taken with the camcorder.  
* Information such as the date and time of recording, recorded with the video file.  
Customer Support Information  
Use of this software is authorized according to the terms of the software license.  
JVC  
When contacting the nearest JVC office or agency in your country (refer to the JVC Worldwide Service  
following information ready.  
Product Name, Model, Problem, Error Message  
PC (Manufacturer, Model (Desktop/Laptop), CPU, OS, Memory (MB), Available Hard Disk Space (GB))  
Please note that it may take some time to respond to your questions, depending on their subject matter.  
JVC cannot answer questions regarding basic operation of your PC, or questions regarding specifications  
or performance of the OS, other applications or drivers.  
Pixela  
Region  
Language  
Phone #  
USA and Canada  
English  
+1-800-458-4029 (toll-free)  
Europe (UK, Germany, France,  
and Spain)  
English/German/French/Spanish  
+800-1532-4865 (toll-free)  
+44-1489-564-764  
English/German/French/Spanish/  
Italian/Dutch  
Other Countries in Europe  
Asia (Philippines)  
China  
English  
+63-2-438-0090  
Chinese  
+86-21-5385-3786  
Please check our website for latest information and downloading.  
EN 33  
Copying Files (Continued)  
1 Open the LCD monitor to turn on the  
Dubbing Files to a VCR/DVD Recorder  
camcorder.  
Preparation:  
2 Set the VCR/DVD recorder to its AUX  
Create a playlist.  
GZ-MG680 GZ-MG650  
input mode.  
Set [SWITCH TO  
ANALOG I/O] to [OUTPUT].  
Check that the images from the camcorder  
are input correctly to the VCR/DVD  
recorder.  
Turn off all units.  
To connect using the AV connectors  
(analog dubbing)  
3 Play back playlists on the camcorder.  
1) Touch MENU.  
DC Connector  
AV Connector  
2) Select [DUBBING PLAYBACK].  
3) Select the desired playlist.  
4) Select [YES]. (A black screen is  
displayed for 5 seconds at the first and  
the last scene.)  
AC Adapter  
4 At the point you want to start  
dubbing, start recording on the VCR/  
DVD recorder.  
Refer to the VCR/DVD recorder’s  
instruction manual.  
To stop dubbing  
Stop recording on the VCR/DVD recorder.  
AV Cable  
To AC Outlet  
To hide the date or icons on the screen  
Change the settings in [DISPLAY ON TV].  
Switching indication modes on LCD  
monitor  
Each time you touch DISPLAY, indications  
on LCD monitor switch as shown below;  
VCR/DVD Recorder  
In recording mode:  
All indications/Indications for selected  
functions  
In playback mode:  
All indications/Only date and time/No  
indications  
AV Connector  
(Input)  
34 EN  
Using with a Portable Media Player  
To cancel the export setting  
Select the file and select [  
Turning on the Export Mode  
] again.  
To quit the screen  
1) Select [DONE].  
2) Select [YES].  
You can easily transfer videos recorded in  
export mode to iTunes®. All the files with the  
export setting turned on are transferred to  
PC. For details on transferring, refer to the  
operation guide of MediaBrowser in the CD-  
ROM.  
To confirm the export setting  
Press EXPORT on the index screen.  
Transferring the Files to PC  
Preparation:  
Preparation:  
Select ! mode.  
Select the recording mode.  
Install iTunes® on a PC.  
Press EXPORT twice.  
1 Connect the camcorder to the PC  
with the USB cable.  
2 Select [EXPORT TO LIBRARY].  
To turn off the export mode  
Press EXPORT twice.  
Changing the Export Setting  
You can set the recorded videos to the export  
setting.  
Preparation:  
All the files with the export setting turned  
on are transferred to PC.  
Select ! mode.  
Select the playback mode.  
1 Press EXPORT.  
2 Select the file and set [  
].  
To check the content of the file, select  
[CHECK].  
3 Select [DONE].  
EN 35  
Uploading Files to Websites  
Turning on the Upload Mode  
Uploading Files  
You can upload the file to video sharing  
For details on uploading files, refer to the  
operation guide of MediaBrowser in the CD-  
ROM.  
websites (YouTubeTM) quickly after recording.  
Preparation:  
Select ! mode.  
1 Connect the camcorder to the PC  
Select the recording mode.  
with the USB cable.  
Press UPLOAD twice.  
2 Select [UPLOAD].  
If you record a file with the upload mode  
set on, the recording stops automatically  
10 minutes after the recording is started.  
The remaining time is displayed on the  
LCD monitor.  
NOTE  
The upload mode turns off each time recording  
is finished.  
36 EN  
FURTHER INFORMATION  
Changing the Menu Settings  
To return to the previous screen  
Select @.  
1 Touch MENU.  
To quit the screen  
Select [QUIT].  
2 Select the desired menu.  
3 Select the desired setting.  
Troubleshooting  
Before requesting service, consult the  
following chart. If the solutions indicated in the  
chart do not solve the problem, consult your  
nearest JVC dealer or JVC service center for  
instructions.  
Refer also to the FAQ of new products on  
JVC’s website.  
The following phenomena are not  
malfunctions.  
The camcorder heats up when it is used for a  
long time.  
The battery heats up during charging.  
When playing back a video, the image stops  
momentarily or the sound is interrupted at  
junctions between scenes.  
LCD monitor momentarily become red or  
black when sunlight is recorded.  
Black spots, or red, green, or blue spots  
appear on the LCD monitor.  
(The LCD monitor contains 99.99% effective  
pixels, but 0.01% of fewer pixels may be  
ineffective.)  
Trouble  
Action  
Connect the AC adapter correctly.  
Recharge the battery pack.  
No power is supplied.  
Fully charge the battery pack, run it down, and then recharge it  
again.  
If the camcorder is used for long periods of time in high or low  
temperatures, or if the battery pack is repeatedly charged, the  
amount of remaining battery may not be displayed correctly.  
The remaining battery  
display is not correct.  
The LCD monitor may be difficult to see if used in bright areas  
such as under direct sunlight.  
The LCD monitor is  
difficult to see.  
EN 37  
Troubleshooting (Continued)  
Trouble  
Action  
Slide the mode switch to select the desired mode (! or #).  
Recording cannot be  
performed.  
If the camcorder temperature increases, REC flashes in the LCD  
monitor and recording stops automatically to protect the HDD.  
Turn off the camcorder, wait for a while, and start recording again.  
Move away from a place where the camcorder is affected by  
excessive sound or vibration (such as a concert hall).  
A malfunction may occur in the HDD of the camcorder. In this  
case, record to a microSD card.  
Insert a commercially available microSD card, and set each of the  
[REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD].  
Recording stops automatically after 12 hours of continuous  
recording.  
Recording stops by  
itself.  
Sometimes playback is interrupted at the connecting section  
between two scenes. This is not a malfunction.  
Sound or video are  
interrupted.  
Select [PLAYBACK MPG FILE] then search the video on the index  
screen.  
(Video files that have damaged management information can be  
played back.)  
Cancel group display and date search functions.  
Change the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA  
FOR IMAGE]. (Files on other media are not displayed.)  
Cannot find a recorded  
video.  
Check the remaining battery pack charge.  
(When the battery pack is fully charged, the lamp does not flash.)  
When recharging in either a hot or cold environment, ensure that  
battery is being charged within the permitted temperature range.  
(If the battery pack is being recharged outside the permitted  
temperature range, recharging may stop to protect the battery pack.)  
The lamp does not flash  
during battery pack  
charging.  
GZ-MG680  
When connecting to the HDMI cable, the image or sound  
may not appear on the TV properly depending on the TV  
connected. In such cases, perform the following operations.  
1) Disconnect the HDMI cable and connect it again.  
2) Turn off and on the camcorder again.  
When connecting to  
the HDMI cable, the  
image or sound does  
not appear on the TV  
properly.  
TVs may operate differently depending on the specifications,  
even if they are HDMI-CEC compliant. Therefore, the HDMI-CEC  
functions of the camcorder cannot be guaranteed to operate in  
combination with all the TVs. In such cases, set [HDMI CONTROL]  
to [OFF].  
GZ-MG680  
HDMI-CEC functions do  
not work properly, and  
the TV does not work  
in conjunction with the  
camcorder.  
If a malfunction occurs in the HDD  
! Perform [FORMAT HDD]. (All data is deleted.)  
# If this does not solve the problem, perform the disc check function from a PC after formatting.  
$ If this does not solve the problem, contact the JVC customer service for repairs.  
To reset the camcorder when it does not operate normally  
! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the  
camcorder, then reattach it.  
# Execute [FACTORY PRESET].  
38 EN  
Warning Indications  
Indication  
Action  
Set the clock. If the message still appears after setting the  
clock, the battery for the clock has been depleted. Consult your  
nearest JVC dealer.  
SET DATE/TIME!  
Be sure to use JVC battery packs.  
COMMUNICATING ERROR  
Set [REC MEDIA FOR VIDEO] to [HDD].  
Replace the microSD card.  
CANNOT USE IN  
VIDEO MODE  
Select [OK] and select [YES] to perform formatting.  
NOT FORMATTED  
Check the operating procedure, and perform once again.  
Turn off the camcorder, and turn it on again.  
FORMAT ERROR!  
DATA DELETION ERROR  
Perform formatting. (All data is deleted.)  
Turn off the camcorder, and turn it on again.  
HDD ERROR!  
Perform formatting. (All data is deleted.)  
Remove and re-insert the microSD card. (MultiMediaCard  
cannot be used.)  
MEMORY CARD ERROR!  
Remove any dirt from the microSD card terminals.  
Insert the microSD card before switching the power on.  
Turn off the camcorder, and turn it on again.  
Stop video recording, and then record a still image. (If an  
microSD card is removed or inserted during video recording, a  
still image cannot be recorded.)  
CANNOT TAKE MORE STILL  
IMAGES AT THE MOMENT  
Set [REC MEDIA FOR VIDEO] to [SD], then record to a  
microSD card.  
Turn off the camcorder and turn it on again.  
Prevent the camcorder from vibration and shock.  
DROP DETECTION WORKED AND  
THE POWER ISTURNED OFF  
RECORDING CANCELLED  
RECORDING FAILURE  
microSD card:  
Remove and re-insert the microSD card. (MultiMediaCard  
cannot be used.)  
Remove any dirt from the microSD card terminals.  
Insert the microSD card before switching the power on.  
HDD:  
PLAYBACK FAILED  
Do not allow the camcorder to be subject to impact/vibrations.  
EN 39  
Specifications  
General  
Power supply  
AC Adapter  
Power requirement  
DC 11 V (Using AC adapter)  
DC 7.2 V (Using battery pack)  
Power consumption  
AC 110 V to 240 V , 50 Hz/60 Hz  
$
Output  
DC 11 V  
, 1 A  
§
Approx. 2.3 W*  
* When the LED light is off and the monitor  
backlight is set to [STANDARD] mode.  
Rated Current Consumption: 1A  
Dimensions (W x H x D)  
53 mm x 68 mm x 113 mm  
(2-1/8" x 2-11/16" x 4-1/2")  
Weight  
Approx. 305 g (0.68 lbs)  
Approx. 350 g (0.78 lbs) (incl. battery pack)  
Operating temperature  
0°C to 40°C (32°F to 104°F)  
Storage temperature  
Remote Control  
Power supply  
DC 3 V  
Battery life  
Approx. 1 year  
(depending on the frequency of use)  
Operating distance  
Within 5 m (16.4 ft)  
Operating temperature  
0°C to 40°C (32°F to 104°F)  
Dimensions (W x H x D)  
42 mm x 14.5 mm x 91 mm  
(1-11/16" x 5/8" x 3-5/8")  
Weight  
–20°C to 50°C (–4°F to 122°F)  
Operating humidity  
35% to 80%  
Approx. 30 g (0.07 lbs)  
(incl. battery)  
Camera/LCD monitor  
Pickup  
1/6" (800,000 pixels) CCD  
Lens  
Still image  
Format  
JPEG  
F 1.8 to 4.0, f = 2.2 mm to 77.0 mm,  
35:1 power zoom lens  
Filter diameter  
ø30.5 mm  
LCD monitor  
Image size  
832 x 624  
Image quality  
FINE / STANDARD  
2.7" diagonally measured,  
LCD panel/TFT active matrix system  
LED Light  
Within 1.5 m (4.9 ft)  
(recommended shooting distance)  
Video  
Signal format  
NTSC standard  
Recording/Playback format  
Video:  
MPEG-2  
Audio:  
Dolby Digital (2ch)  
Connectors  
Recording mode (video)  
ULTRA FINE:720 x 480 pixels, 8.5 Mbps (VBR)  
FINE:  
NORMAL:  
AV input/output  
Video input*: 0.8 V (p-p) to 1.2 V (p-p), 75  
Video output: 1.0 V (p-p), 75  
Audio input*: 300 mV (rms), 50 k  
Audio output: 300 mV (rms), 1 k  
W
720 x 480 pixels, 5.5 Mbps (VBR)  
720 x 480 pixels, 4.2 Mbps (VBR)  
W
W
ECONOMY: 352 x 240 pixels, 1.5 Mbps (VBR)  
W
GZ-MG680 GZ-MG650  
Recording mode (audio)  
ULTRA FINE:48 kHz, 384 kbps  
FINE:  
NORMAL:  
*
only  
GZ-MG680  
HDMI  
HDMI Mini Connector  
USB  
48 kHz, 384 kbps  
48 kHz, 256 kbps  
Mini USB type A and type B,  
USB 2.0 compliant  
ECONOMY: 48 kHz, 128 kbps  
Design and specifications subject to change  
without notice.  
40 EN  
h: hour/m: minute  
Approximate recordable time (for video)  
HDD  
microSD Card  
Recording medium  
GZ-MG630  
GZ-MG650  
GZ-MG680  
Quality  
60 GB  
80 GB  
120 GB  
4 GB  
8 GB  
ULTRA FINE  
FINE  
14 h 20 m  
21 h 20 m  
28 h 10 m  
19 h 00 m  
28 h 20 m  
37 h 40 m  
28 h 40 m  
42 h 40 m  
56 h 20 m  
57 m  
1 h 54 m  
2 h 50 m  
3 h 46 m  
9 h 56 m  
1 h 25 m  
1 h 53 m  
4 h 58 m  
NORMAL  
ECONOMY  
75 h 00 m 100 h 00 m 150 h 00 m  
Approximate number of images (for still image)  
The HDD can record up to 9999 still images in either mode.  
Recording medium  
microSD Card  
256 MB 512 MB  
1 GB  
4160  
6240  
2 GB  
4 GB  
9999  
9999  
8 GB  
9999  
9999  
Image size/Quality  
832 x 624 / FINE  
1010  
1515  
2050  
3080  
7625  
9999  
832 x 624 / STANDARD  
h: hour/m: minute  
Required charging/recording time (approx.)  
Battery pack  
BN-VF808U  
Charging time  
1 h 50 m  
Recording time  
2 h 5 m*  
(Provided)  
BN-VF815U  
2 h 40 m  
3 h 40 m  
4 h 15 m*  
6 h 25 m*  
BN-VF823U  
* When the LED light is off and the monitor backlight is set to [STANDARD] mode.  
EN 41  
Cautions  
ATTENTION:  
AC Adapter  
The product you have purchased is  
powered by a rechargeable battery  
that is recyclable.  
Please call 1-800-8-BATTERY for  
information on how to recycle this  
battery.  
USING HOUSEHOLD AC PLUG ADAPTER  
In case of connecting the unit’s power cord to  
an AC wall outlet other than American National  
Standard C73 series type use an AC plug adapter,  
called a “Siemens Plug”, as shown.  
For this AC plug adapter, consult your nearest  
JVC dealer.  
Recording Medium  
Plug Adapter  
Be sure to follow the guidelines below  
to prevent corruption or damage to your  
recorded data.  
Do not bend or drop the recording medium,  
or subject it to strong pressure, jolts or  
vibrations.  
Do not splash the recording medium with water.  
Battery Pack  
Do not use, replace, or store the recording  
medium in locations that are exposed to  
strong static electricity or electrical noise.  
The supplied battery pack is a Terminals  
lithium-ion battery. Before using  
the supplied battery pack or an  
optional battery pack, be sure  
Do not turn off the camcorder power or  
remove the battery or AC adapter during  
shooting, playback, or when otherwise  
accessing the recording medium.  
to read the following cautions:  
Do not bring the recording medium near  
objects that have a strong magnetic field or  
that emit strong electromagnetic waves.  
To avoid hazards  
Do not store the recording medium in locations  
... do not burn.  
with high temperature or high humidity.  
... do not short-circuit the terminals. Keep it away  
from metallic objects when not in use. When  
transporting, make sure the provided battery  
cap is attached to the battery. If the battery cap  
is misplaced, carry the battery in a plastic bag.  
... do not modify or disassemble.  
Do not touch the metal parts.  
When formatting or erasing data using  
the camcorder, only the file administration  
information is changed. The data is not  
completely erased from the hard disk. If you  
want to completely erase all of the data,  
we recommend either using commercially  
available software that is specially designed for  
that purpose, or by physically destroying the  
camcorder with a hammer etc.  
... do not expose the battery to temperatures  
exceeding 60°C (140°F), as this may cause the  
battery to overheat, explode or catch fire.  
... use only specified chargers.  
To prevent damage and prolong service life  
... do not subject to unnecessary shock.  
... charge within the temperature range of 10°C  
to 35°C (50°F to 95°F). Cooler temperatures  
require longer charging time, or in some cases  
stop charging at all. Warmer temperatures  
prevent complete charging, or in some cases  
stop charging at all.  
Hard Disk  
Do not use the unit where it is subject to  
vibrations or loud sounds.  
If you move the unit suddenly, the drop  
detection function may operate and the power  
may be turned off.  
... store in a cool, dry place. Extended exposure  
to high temperatures will increase natural  
discharge and shorten service life.  
... fully charge and then fully discharge the battery  
every 6 months when storing the battery pack  
over a long period of time.  
... remove from charger or powered unit when not  
in use, as some machines use current even  
when switched off.  
LCD Monitor  
To prevent damage to the LCD monitor, DO  
NOT  
... push it strongly or apply any shocks.  
... place the camcorder with LCD monitor on the  
bottom.  
To prolong service life  
... avoid rubbing it with coarse cloth.  
42 EN  
To prevent the unit from dropping,  
Main Unit  
Fasten the grip belt securely.  
When using the camcorder with a tripod,  
For safety, DO NOT  
attach the camcorder to the tripod securely.  
If the camcorder drops, you may be injured and  
the camcorder may be damaged.  
... open the camcorder’s chassis.  
... disassemble or modify the unit.  
... allow inflammables, water or metallic objects to  
enter the unit.  
When a child uses the unit, there must be  
parental guidance.  
... remove the battery pack or disconnect the  
power supply while the power is on.  
... leave the battery pack attached when the  
camcorder is not in use.  
... place naked flame sources, such as lighted  
candles, on the apparatus.  
... expose the apparatus to dripping or splashing.  
... leave dust or metal objects adhered to the  
power plug or an AC wall outlet.  
... insert any objects in the camcorder.  
Avoid using the unit  
... in places subject to excessive humidity or dust.  
... in places subject to soot or steam such as near  
a cooking stove.  
... in places subject to excessive shock or vibration.  
... near a television set.  
... near appliances generating strong magnetic  
or electric fields (speakers, broadcasting  
antennas, etc.).  
... in places subject to extremely high (over 40°C  
or 104°F) or extremely low (under 0°C or 32°F)  
temperatures.  
... in places where air pressure is low (more than  
3000 m (9870 ft) above the sea level).  
DO NOT leave the unit  
... in places of over 50°C (122°F).  
... in places where humidity is extremely low  
(below 35%) or extremely high (above 80%).  
... in direct sunlight.  
... in a closed car in summer.  
... near a heater.  
... in high places such as on a TV. Leaving the unit  
in high places while a cable is connected may  
result in a malfunction if the cable is caught and  
the unit falls onto the floor.  
Changes or modifications not approved by  
JVC could void the user’s authority to operate  
the equipment. This equipment has been  
tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of  
the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
interference in a residential installation. This  
equipment generates, uses, and can radiate  
radio frequency energy and, if not installed  
and used in accordance with the instructions,  
may cause harmful interference to radio  
communications. However, there is no guarantee  
that interference will not occur in a particular  
installation. If this equipment does cause harmful  
interference to radio or television reception,  
which can be determined by turning the  
equipment off and on, the user is encouraged  
to try to correct the interference by one or more  
of the following measures: Reorient or relocate  
the receiving antenna. Increase the separation  
between the equipment and receiver.  
Connect the equipment into an outlet on a  
circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/  
TV technician for help.  
This Class B digital apparatus complies with  
Canadian ICES-003.  
Cet appareil numérique de la classe B est  
conforme à la norme NMB-003 du Canada.  
To protect the unit, DO NOT  
... allow it to become wet.  
... drop the unit or strike it against hard objects.  
... subject it to shock or excessive vibration during  
transportation.  
... keep the lens directed at extremely bright  
objects for long periods.  
... expose the lens to direct sunlight.  
... swing it excessively when using the hand strap.  
... swing the soft camcorder case excessively  
when the camcorder is inside it.  
... place the camcorder in dusty or sandy areas,  
such as on a beach.  
EN 43  
Terms  
A
M
AC Adapter ..................................................16, 42  
AV Connection .............................................25, 34  
Manual Recording .............................................24  
Menu Settings ...................................................37  
microSD Card ....................................................18  
B
C
D
Backlight Compensation ....................................24  
Battery Pack ................................................16, 42  
N
O
Number of Images .............................................41  
CD-ROM ......................................................10, 29  
Clock Adjust ......................................................16  
On-screen Recording Control ............................19  
On-screen Zoom Control ...................................21  
P
Q
R
Date/Time Setting ...............................................5  
Daylight Saving Time .........................................16  
Deleting Files ....................................................26  
Digest Playback .................................................22  
Dubbing Playback ..............................................34  
DVD Backup ......................................................27  
DVD Burner .......................................................27  
Portable Media Player .......................................35  
Quick Review ...............................................19, 20  
Recordable Time ...............................................41  
Recording Medium ............................................42  
Remaining Battery Power ..................................21  
Remaining Recording Time ...............................21  
Remote Control ...........................................11, 13  
E
F
H
Export to Library Mode ......................................35  
Finalize ..............................................................27  
S
U
Speaker volume ................................................22  
Hard Disk ..........................................................42  
HDMI .................................................................25  
Uploading Files .................................................36  
USB Cable ...................................................27, 30  
I
V
Y
Z
iTunes ................................................................35  
Viewing Files on TV ...........................................25  
YouTube .............................................................36  
Zoom .................................................................21  
L
Language Setting ..............................................17  
LCD Monitor ................................................14, 42  
LED Light ..........................................................21  
44 EN  

Belkin BLUETOOTH HOT SYNC OPERATION F8T002 User Manual
Canon 8326B001 User Manual
Clarion Car Stereo System NZ502 User Manual
Clarion DXZ948RMP User Manual
Crown Boiler BSI345 User Manual
Energizer 223 User Manual
Harman HK 990 User Manual
Jensen Car Stereo System MP6212 User Manual
JVC Everio GZ MG70 User Manual
JVC GR AXM226 User Manual