INSTRUCTIONS
MANUAL DE INSTRUCCIONES
EN SP
HARD DRIVE CAMCORDER
VIDEOCÁMARA CON DISCO DURO
Dear Customer
U
GZ-MG465
Thank you for purchasing this hard
disk camera. Before use, please read
the safety information and precautions
contained in pages 4 and 5 to ensure
safe use of this product.
For Future Reference:
Enter the Model No. (located on the
bottom of the camera) and Serial No.
(located on the battery pack mount of
the camera) below.
Model No.
Serial No.
Apreciado cliente
Muchas gracias por haber adquirido
esta cámara con disco duro integrado.
Antes de usarla, lea la información de
seguridad y las precauciones contenidas
en las páginas 4 y 5 para garantizar un
uso seguro de este producto.
Para futuras consultas:
Escriba a continuación el número
de modelo (situado en la base de la
cámara) y el número de serie (situado
en el compartimiento de la batería de
la cámara).
Número de modelo
Número de serie
CAUTION: Touch the sensors with your finger. The sensors do not function if you touch
them with your finger nail or with gloves on.
TWhen [SET DATE/TIME!] appears, USet the date and time
(੬ pg. 14)
select [YES] within 10 seconds.
SET DATE/TIME!
DATE
TIME
JAN 31 2007 11 07 AM
YES
NO
(੬ pg. 6)
SPress the START/STOP button to start recording
SSelect the desired file using the touch sensor. And then
touch the OK button to start playback
To stop playback
•
Select
.
L
3
Safety Precautions
When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on
all sides to allow for ventilation (10 cm (3-15/16")
or more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out.)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental
problems must be considered and the local rules
or laws governing the disposal of these batteries
must be followed strictly.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The apparatus shall not be exposed to dripping
or splashing.
Do not use this equipment in a bathroom or
places with water.
Also do not place any containers filled with water
or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused.)
WARNING:TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
NOTES:
The rating plate and safety caution are on the
bottom and/or the back of the main unit.
•
Do not point the lens directly into the sun. This
can cause eye injuries, as well as lead to the
malfunctioning of internal circuitry. There is also a
risk of fire or electric shock.
The serial number plate is on the battery pack
mount.
•
The rating information and safety caution of the
AC adapter are on its upper and lower sides.
•
CAUTION!
The following notes concern possible physical
damage to the camera and to the user.
Carrying or holding the camera by the LCD monitor
can result in dropping the unit, or in a malfunction.
Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the
camera.
Caution on Replaceable lithium battery
The battery used in this device may present a fire
or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C
or incinerate.
Replace battery with Panasonic (Matsushita
Electric), Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is
incorrectly replaced.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.)
to the camera and leaving it on top of the TV is
not recommended, as tripping on the cables will
cause the camera to fall, resulting in damage.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in
fire.
•
•
•
CAUTION:
For USA-California Only
The mains plug shall remain readily operable.
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material
– special handling may apply.
WARNING:
The battery pack, the camera with battery
installed, and the remote control with battery
installed should not be exposed to excessive heat
such as direct sunlight, fire or the Iike.
4
Remember that this camera is intended for
private consumer use only.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Only use attachments/accessories specified by
the manufacturer.
Any commercial use without proper permission
is prohibited. (Even if you record an event such
as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Trademarks
Manufactured under license from Dolby
•
Laboratories. Dolby and double-D symbol are
trademarks of Dolby Laboratories.
Windows® is either registered trademark or
•
trademark of Microsoft Corporation in the United
States and/or other countries.
Macintosh is a registered trademark of Apple
Inc.
•
Other product and company names included
•
in this instruction manual are trademarks
and/or registered trademarks of their respective
holders.
10.Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer,
or sold with the
apparatus. When a cart
is used, use caution
when moving the
cart/apparatus combination to avoid injury from
tip-over.
11.Unplug this apparatus during lightning storms
or when unused for long periods of time.
12.Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
If this symbol is shown, it is only
valid in the European Union.
5
NOTE
How to Select an Item Using the
Touch Sensor
An example screen in English is used for the
guidance below.
The cursor moves from 1 to 9 on the index
screen when you slide your finger on the
touch sensor.
1
4
7
2
5
8
3
6
9
Selecting an item from the menu list
(on the menu screen)
L
MENU
IMAGE QUALITY
IMAGE SIZE
Q
GAIN UP
BASIC SETTINGS
CAUTION
Touch the sensors with your finger. The
sensors do not function if you touch them with
your finger nail or with gloves on.
R
QSlide your finger up and down on the
sensor.
RTouch the OK button.
Using on-screen buttons
(e.g. during playback ੬ pg. 18)
L
A
B
A
B
To select an on-screen button appearing
on the left side, touch the portion of the
sensor next to the on-screen button.
To select an on-screen button appearing at
the bottom of the screen, touch the touch
sensor under the on-screen button you
want to select.
6
Make a backup of important recorded data
JVC will not be responsible for any lost data. It is recommended to copy your important
recorded data to a DVD or other recording media for storage. (੬ pg. 22)
Make a trial recording
Before the actual recording of important data, make a trial recording and play back the
recorded data to check that the video and sound have been recorded correctly.
Reset the camera if it does not operate correctly
This camera uses a microcomputer. Factors such as background noise and interference
can prevent it from operating correctly. If the camera does not operate correctly, reset the
camera. (੬ pg. 33)
Precautions on handling batteries
Be sure to use the JVC BN-VF808U/VF815U/VF823U battery packs.
If the camera is subjected to electrostatic discharge, turn the power off before using it
again.
•
•
If a malfunction occurs, stop using the camera immediately
and consult your local JVC dealer
If a problem occurs when using the microSD card, take the card together with the
camera for repair. If one of them is not included, the cause of the malfunction cannot be
diagnosed, and the camera cannot be repaired.
•
Recorded data may be erased while the camera is being repaired or inspected. Back up
all data before requesting repairs or inspections.
•
Because the camera may be used for demonstration in a shop,
the demonstration mode is set to [ON] by default
To deactivate the demonstration mode, set [DEMO MODE] to [OFF] from the MENU.
When connecting the camera to other devices using an
optional DV cable, make sure to follow the procedure below.
Connecting the cable incorrectly may cause malfunctions to
the camera and/or other devices.
Connect the DV cable first to the device, and then to the camera.
Connect the DV cable (plugs) correctly according to the shape of the DV connector.
•
•
7
Contents
GETTING STARTED
PC OPERATION
Accessories ............................................ 9
How to Use the Everio Dock..........................9
Index ...................................................... 10
Indications on LCD Monitor................. 12
Necessary Settings before Use........... 14
Charging the Battery Pack...........................14
Date/Time Setting........................................14
Other Settings....................................... 15
Attaching the Shoulder Strap.......................15
Checking the Remaining Battery Power......15
Preparing the Remote Control.....................15
File Backup on a Windows® PC ........... 23
System Requirements .................................23
Software Installation ....................................24
Connecting the Camera to the PC...............25
File Backup on the PC.................................26
File Backup on the PC without Using
Software.....................................................27
Other Windows® PC Operations .......... 28
Getting More Use of the Software ...............28
Folder Structure and Extensions........ 29
File Backup on a Macintosh® .............. 30
System Requirements .................................30
Connecting the Camera to the Macintosh ...30
File Backup on the Macintosh .....................31
Customer Support Information ........... 32
RECORDING
Recording Files..................................... 16
Video Recording..........................................16
Still Image Recording ..................................17
Playing Back Files................................ 18
Video/Still Image Playback ..........................18
Watching Images on TV........................ 19
FURTHER INFORMATION
Troubleshooting.................................... 33
Cleaning ................................................ 34
Warning Indications ............................. 35
Specifications ....................................... 36
Cautions ................................................ 38
Terms..................................................... 40
EDITING/COPYING
Managing Files...................................... 20
Deleting/Protecting Files..............................20
Copying Files........................................ 22
Using a DVD Burner to Copy Files from the
Camera ......................................................22
Read these INSTRUCTIONS to enjoy your CAMCORDER.
For more details on the operations, refer to the GUIDEBOOK in the
supplied CD-ROM.
In order to view the GUIDEBOOK, Adobe® Acrobat® ReaderTM or Adobe®
Reader® must be installed.
Adobe® Reader® can be loaded from Adobe’s web site:
NOTE
Select your desired language with a single click.
The model name is indicated on the bottom of your camcorder.
8
GETTING STARTED
Accessories
Everio Dock
CU-VC4U (੬ below)
AC Adapter
AP-V18U/14U
Battery Pack
BN-VF808U
Audio/Video Cable
USB Cable
(੬ pg. 22, 25 and 30)
Shoulder Strap
(੬ pg. 15)
CD-ROM
(੬ pg. 24, 28)
Remote Control Unit
RM-V751U (੬ pg. 15)
NOTE
Lithium Battery
CR2025
Pre-installed in the
remote control unit.
Core Filter
Make sure to use the provided cables for
connections. Do not use any other cables.
How to Use the Everio Dock
You can connect cables to the connectors of the Everio dock. The connection is completed when
you place the camera on the dock.
S-Video Jack
Camera Connection Terminal
AV Jack
DC Jack
DV Jack
USB Jack
NOTE
For the connection using the S-Video jack and DV jack, an optional S-Video cable and DV cable are needed.
Consult the JVC Service Center described on the sheet included in the package for details on its availability.
Make sure to connect the end with a core filter to the camera. The core filter reduces interference.
The S-Video cable (optional) enables even higher playback quality on TV. (੬ pg. 19) Be sure to use
the YTU94146A S-Video cable.
•
Attaching the Core Filter to the USB Cable
Connect the end of the cable with the core filter to the camera.
Release the stopper.
3 cm (1-3/16")
Wind once.
9
Index
NOTES
The LCD monitor can rotate 270°.
•
Power-linked operation
•
You can also turn the camera on/off by
opening/closing the LCD monitor during the
recording mode.
Be careful not to cover 4, 5, 7and 9
during shooting.
•
10
Camera
Remote Control
! Touch Sensor (੬ pg. 6)
# OK (DISP) Button [OK/DISP] (੬ pg. 13)
$ Menu Button [MENU]
Q Infrared Beam Transmitting Window
R ZOOM (T/W) Buttons
Zoom In/Out
% Power Switch [POWER]
(You can turn off the camera by pressing
and holding this button.)
S Up Button
Rotate Button (counterclockwise)
(੬ pg. 18)
& Speaker
T Skip Backward Button
U Left Button
V Back Button
W PLAYLIST Button
X START/STOP Button
Y SNAPSHOT Button (੬ pg. 17)
Z INFO Button (੬ pg. 15)
a Skip Forward Button
b PLAY/PAUSE Button
c Right Button
d Next Button
e Down Button
Rotate Button (clockwise) (੬ pg. 18)
f INDEX Button
g DISP Button
( Playback/Recording Mode Switching
Button [SELECT PLAY/REC] (੬ pg. 16)
) Access/Charge Lamp [ACCESS/CHARGE]
(Blinks when you access files or charge
the battery. Do not turn off the power or
remove the battery pack/AC adapter while
accessing files.)
* Direct DVD Button [DIRECT DVD]
(੬ pg. 22)/Title Button [TITLE]
+ Direct Backup Button [DIRECT BACK
UP] (੬ pg. 26)/Information Button [INFO]
(੬ pg. 15)
, Auto/Manual Mode Button [AUTO/
MANUAL]
- Video Recording Start/Stop Button [START/
STOP] (੬ pg. 16)
. Still Image Shooting Button [SNAPSHOT]
(੬ pg. 17)
/ Zoom Lever [W 7,T
]
,
Speaker Volume Control [–VOL+]
(੬ pg. 18)
0 Mode Switch [!, #]
1 DC Jack [DC] (੬ pg. 14)
2 Audio/Video Jack [AV]
3 USB (Universal Serial Bus) Jack [
(੬ pg. 22, 25 and 30)
4 LED Light
]
2
5 Camera Sensor
Remote Sensor (੬ pg. 15)
6 Lens Cover
7 Lens
8 Lens Cover Switch [
9 Stereo Microphone
: microSD Card Slot
; Stud Hole
,
]
= >
< Tripod Mounting Socket
= Battery Release Button [BATT.] (੬ pg. 14)
> Battery Pack Mount (੬ pg. 14)
? Grip Strap
11
Indications on LCD Monitor
During both Video and Still Image
Recording
During Video Recording Only
[5h56m]
0:04:01
1/250
! Mode Indicator
# Counter
$ Picture Quality:
JAN. 20. 2007 4:55PM
(ULTRA FINE),
B
! Selected Operation Mode Indicator
4 : Auto Mode
(FINE),
(NORMAL),
(ECONOMY)
C
M
D
E
% Remaining Time (੬ pg. 16, 37)
REC: (Appears during recording.)
(੬ pg. 16)
3 : Manual Mode
&
# Effect Mode Indicator
$ Tele Macro Mode Indicator
% LED Light Indicator
: (Appears during record-standby
mode.)
MQ
& Program AE Mode Indicator
( AV/S-Video Input Jack Indicator
) Zoom Indicator
( Digital Image Stabilizer (DIS) Indicator
(Appears when [DIS] is set to [OFF].)
) Wind Cut Indicator
* Selected Medium Indicator
+ Drop Detection Indicator (Appears when
[DROP DETECTION] is set to [OFF].)
, Approximate Zoom Ratio
- White Balance Indicator
. Manual Focus Adjustment Indicator
/ Battery Indicator (੬ pg. 35)
0 Date/Time (੬ pg. 14)
* Event Indicator
During Still Image Recording Only
640
[ 9 9 9 9 ]
FINE
1 Brightness Control Indicator
2 Backlight Compensation Indicator
3 Iris Lock Indicator
10
PHOTO
4
: Exposure Adjustment Indicator
. : Metering Area Control Indicator
! Mode Indicator
# Focus Indicator
$ Image Size
5 Shutter Speed
% Picture Quality: FINE (fine) or STD
(standard)
& Remaining Number of Shots (੬ pg. 37)
( Shooting Indicator (੬ pg. 17)
) Shutter Mode Indicator
* Self-Timer Recording Indicator
12
During Video Playback
During Still Image Playback
9: 55: 0 1
1 0 1 - 0 0 9 8
JAN. 20. 2007 4:55PM
JAN. 20. 2007 4:55PM
! Mode Indicator (੬ pg. 18)
# Effect Mode Indicator
$ Wipe/Fader Effect Indicator
! Mode Indicator (੬ pg. 18)
# Effect Mode Indicator
$ Folder/File Number
% Slide Show Playback Indicator (੬ pg. 18)
& Selected Medium Indicator
( Drop Detection Indicator (Appears when
[DROP DETECTION] is set to [OFF].)
) Battery Indicator (੬ pg. 35)
* Date/Time (੬ pg. 14)
%
: Playlist Playback Indicator (Appears
when playing back a playlist.)
6
¨ª : Event Search Playback Indicator
(Appears when playing back a video file
from the event search.)
¨© : Date Search Playback Indicator
(Appears when playing back a video file
from the date search.)
& Picture Quality:
(ULTRA FINE),
B
(FINE),
(NORMAL),
(ECONOMY)
C
D
E
( Counter
Switching indication modes on LCD
monitor
Each time you touch the DISP button,
indications on LSD monitor switch as
shown below;
) Playback Mode (੬ pg. 18)
:Playback
F
:Pause
Q
:Forward Search
:Reverse Searc
K
J
:Forward Slow-Motion
:Reverse Slow-Motion
G
E
In recording mode:
All indications/Indications for selected
functions
In playback mode:
All indications/Only date and time/
No indications
(The number on the left shows speed.)
* Selected Medium Indicator
+ Drop Detection Indicator (Appears when
[DROP DETECTION] is set to [OFF].)
, Volume Level Indicator
- Battery Indicator (੬ pg. 35)
. Date/Time (੬ pg. 14)
On-screen function guide
The on-screen function guide is displayed
at the bottom of the screen during menu
display, etc.
EFFECT
WIPE/FADER
MONITOR OFF
BASIC SETTINGS
ADD EFFECT TO IMAGE
13
Necessary Settings before Use
NOTES
Charging the Battery Pack
You can also use the camera with just the
AC adapter.
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
•
•
1
2
Close the LCD monitor to turn off the
camera.
Attach the battery pack.
Slide the battery pack down until it locks
in place.
Date/Time Setting
Bottom of the Camera
BATT.
1
2
Open the LCD monitor to turn on the
camera.
When [SET DATE/TIME!] appears,
select [YES] within 10 seconds.
SET DATE/TIME!
YES
NO
3
Connect the AC adapter.
If you do not select within 10 seconds, the
screen disappears. In such case, press
the POWER button and turn the camera
on again.
DC Jack
3
Set the date and time.
DATE
TIME
JAN 31 2007 11 07 AM
AC Adapter
Repeat this step to input the month, day,
year, hour and minute.
To AC Outlet
(110V to 240V)
4
Touch the OK button to finish.
You can also connect the AC adapter using
the Everio dock connector. (੬ pg. 9)
•
The charge lamp blinks to indicate charging
has started.
•
To change the date and time
1) Touch the MENU button.
2) Select [BASIC SETTINGS], and then
[CLOCK ADJUST].
L
When the lamp goes out, charging is
•
finished. Unplug the AC adapter from the
AC outlet and disconnect the AC adapter
from the camera
3) Set the date and time.
To return to the previous screen
L
L
To detach the battery pack
Slide and hold BATT. (੬ step 2), then
remove the battery pack.
L
L
Select
.
@
To quit the screen
Touch the MENU button.
To check the remaining battery power
See page 15.
14
Other Settings
Attaching the Shoulder Strap
Buckle
Strap Guide
Eyelet
Checking the Remaining Battery
Power
Preparing the Remote Control
A battery is included inside the remote control at
the time of purchase.
Remove the insulation sheet before use.
Preparation:
Attach the battery pack.
Press the SELECT PLAY/REC button to
select recording mode.
•
•
Beam Effective Area
Remote Sensor
For ! mode:
Press the INFO button twice or the INFO
button and then select
.
;
For # mode:
Press the INFO button.
BATTERY CONDITION
DIRECT
BACK UP
Effective distance:
5 m (16 ft)
MAX TIME
min
INFO
NOTE
QUIT
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
To return to the normal screen
Press the INFO button again.
L
To Reinsert the Battery
NOTES
Pull out the battery holder by pressing the lock
tab.
If “COMMUNICATING ERROR” appears,
there may be a problem with your battery.
In such a case, consult your nearest JVC
dealer.
•
Lock Tab
The recordable time display should only be
used as a guide. It is displayed in 10 minute
units.
•
Lithium Battery
(CR2025)
15
RECORDING
Recording Files
Video Recording
Preparation: Open the LCD monitor to turn on the camera.
Slide the mode switch to select
! (video) mode.
Press the SELECT PLAY/REC
button to select recording mode.
SELECT
PLAY/REC
Press the START/STOP button to
start recording.
[ 5 h 5 6 m ]
REC
Approximate remaining time for
recording appears.
To stop recording
To change the aspect ratio of the image
(16:9/4:3)
Change the settings in [SELECT ASPECT
RATIO] from the MENU.
L
L
L
Press the START/STOP button again.
To view the video you just recorded
Select A during pause.
During the preview, you can delete the
video by selecting *.
To change the picture quality
Change the settings in [VIDEO QUALITY]
from the MENU.
L
NOTES
Video files are given the names MOV001.MOD to MOV009.MOD, MOV00A.MOD to MOV00F.MOD,
and MOV010.MOD in order of recording.
•
After recording video for 12 consecutive hours, recording stops automatically.
A new file will be created for every 4 GB of continuous shooting.
This camera records video in MPEG2 format compliant with SD-VIDEO format. This camera is not
compatible with other digital video formats.
•
•
•
16
Still Image Recording
Preparation: Open the LCD monitor to turn on the camera.
Slide the mode switch to select
# (still image) mode.
Press the SELECT PLAY/REC
button to select recording mode.
SELECT
PLAY/REC
Press and hold the SNAPSHOT
button halfway.
640
[
FINE
The ? indicator becomes green when
the captured image is focused.
Press the SNAPSHOT button fully
to take the photo/picture.
To view the image you just recorded
Select A after shooting.
L
During the preview, you can delete the
image by selecting *.
40
[ 9 9 9 9 ]
FINE
To change the picture quality
Change the settings in [IMAGE
QUALITY] from the MENU.
To record still images continuously
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE] from the MENU.
To change the image size
L
L
L
Change the settings in [IMAGE SIZE]
from the MENU.
17
Playing Back Files
3
Select the desired file.
Video/Still Image Playback
VIDEO PLAYBACK
1
2
Slide the mode switch to select !
(video) or # (still image) mode.
To watch on TV
See page 19.
L
L
To check the file information
Press the INFO button when playback is
paused.
Press the SELECT PLAY/REC button
to select playback mode.
To adjust the sound volume of videos
L
SELECT
PLAY/REC
Turn down the
volume
Turn up the
volume
The index screen for videos appears.
Operations during Video Playback
Operations during Still Image
Playback
L
L
: Return to the first scene of the file
: Go to the first scene of the next file
: Return to the index screen
N
!
#
$
%
O
L
J
E
: Rotate 90 degrees counterclockwise
: Change playback order of slide show
in reverse direction
: Rotate 90 degrees clockwise
: Change playback order of slide show
(
!
#
P
: Reverse search (during playback)
: Frame-by-frame playback in reverse
)
direction (during pause)*
F
: Playback
F
Q
K
G
&
(
in forward direction
: Pause
: Return to the index screen
: Display the previous file
: Start/end the slide show
: Display the next file
L
N
F
O
$
%
&
(
: Forward search (during playback)
: Frame-by-frame playback in forward
direction (during pause)*
* Slow playback starts when you keep
touching the sensor button under E / G
for a while.
18
Watching Images on TV
Preparation:
Set [SWITCH TO ANALOG I/O] to [OUTPUT] from the MENU. (Factory-preset = [OUTPUT])
Turn off all units.
•
•
AV Jack
DC Jack
AV Cable
To AC Outlet
AV Input Jack
AC Adapter
NOTES
You can also connect the cables using the Everio dock connectors. The S-Video cable
(optional) enables even higher playback quality. (੬ pg. 9) When other devices such as a DVD
•
burner are connected to the Everio dock, turn the power of these devices off.
This camera is designed to be used with NTSC-type color television signals. It cannot be used
with a television of a different standard.
•
1
Turn on the camera and the TV.
2
Set the TV to its VIDEO mode.
3
(Only when connecting the camera to the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and set it to its AUX input mode.
4
Start playback on the camera. (੬ pg. 18)
16:9 TV
4:3 TV
If the aspect ratio of the image is not correct as
shown on the right
Change the settings in [SELECT TV TYPE] from
the MENU.
L
L
To display the camera’s on-screen display on
TV
Set [DISPLAY ON TV] to [ON] from the MENU.
19
EDITING/COPYING
Managing Files
CAUTION
Deleting/Protecting the Currently
Displayed File
Do not remove the recording medium or
perform any other operation (such as turning
off the power) while accessing files. Also,
be sure to use the provided AC adapter, as
the data on the recording medium may be
corrupted if the battery becomes exhausted
during operation. If the data on the recording
medium becomes corrupted, format the
recording medium.
After performing steps 1-2
3
Select [CURRENT].
DELETE
CURRENT
FILE SELECT
DELETE ALL
SELECT FILES ONE BY ONE
QUIT
Deleting/Protecting Files
4
When [DELETE?] or [PROTECT?]
appears, select [YES].
Protected files cannot be deleted. To delete
them, release the protection first.
•
Once files are deleted, they cannot be
restored. Check files before deleting.
•
DELETE?
Remaining files:
YES
NO
Preparation:
Slide the mode switch to select ! or #
•
mode.
You can select the previous or next file by
selecting { or }.
Press the SELECT PLAY/REC button to
select playback mode.
•
The following screen illustrations are
examples when performing [DELETE].
Deleting/Protecting Files
After performing steps 1-2
1
Touch the MENU button.
You can skip directly to the delete menu by
selecting *.
3
Select [FILE SELECT].
2
Select [DELETE] or [PROTECT/
CANCEL].
4
Select the desired file.
VIDEO DELETE
DELETE
PROTECT/CANCEL
PLAYBACK PLAYLIST
PLAYBACK MPG FILE
DELETE RECORDED FILES
QUIT
The * (deletion) or x (protection) mark
appears on the file. To select other files,
repeat this step.
If you slide the zoom lever towards T,
the preview screen is displayed. Sliding
the zoom lever towards W returns to the
index screen.
•
•
5
Select [QUIT].
20
6
Select [EXECUTE AND QUIT] (when
performing [DELETE]) or [YES]
(when performing [PROTECT]).
DELETE?
EXECUTE AND QUIT
QUIT
RETURN
Deleting/Protecting All Files
After performing steps 1-2 (੬ pg. 20)
3
Select [DELETE ALL] or [PROTECT
ALL].
4
When [DELETE ALL?] or [PROTECT
ALL?] appears, select [YES].
DELETE ALL?
(EXCEPT PROTECTED FILE)
YES
NO
To quit the screen
Select [QUIT].
L
To release protection
Select the protected file in step 4
(“Deleting/Protecting Files” ੬ pg. 20).
L
To release protection of all files
1) In step 3, select [CANCEL ALL].
2) Select [YES].
L
21
Copying Files
Types of Copying and Connectable Device
Connection with a DVD Burner
The Camera
Preparation:
Close the LCD monitor to turn off the camera.
You can copy still images
from HDD onto microSD
card or from microSD card
to HDD with this camera
alone.
To AC Outlet
AC Adapter
USB Jack
DC Jack
DVD Burner
(CU-VD3)
You can copy video/still
image files recorded on this
camera onto DVD discs.
(੬ right column)
USB Jack
PC
USB Cable
DVD Burner
You can copy video/still
image files on this camera
onto your PC. (੬ pg. 23
to 32)
NOTE
Use the USB cable that came with the DVD
burner.
Copying Video Files that Have Never
Been Copied
Using a DVD Burner to Copy Files
from the Camera
Files that have never been copied to the DVD
discs are automatically selected and copied.
Supported discs: 12cm DVD-R, DVD-RW
Regarding DVD-R discs, only unused DVD-
•
R discs can be used. Regarding DVD-RW
discs, used DVD-RW discs can also be
used, but they need to be formatted before
recording. Formatting a disc deletes all
content recorded on the disc up until that
time.
1
Open the LCD monitor to turn on the
camera.
2
Press the DIRECT DVD button.
Dual-layer discs cannot be used.
3
•
Select [EXECUTE].
The DVD disc begins to be created.
•
Regarding finalization after copying
When [COMPLETED] appears, touch
The disc is automatically finalized so that
it can be played on other devices. After
finalizing, the disc is a play-only disc, so no
more files can be added.
the OK button.
When [COMPLETED. CHANGE DISC]
appears, change the disc. The second
DVD disc begins to be created.
•
To cancel the DVD creation, select
[CANCEL].
•
NOTE
When using the optional DVD Burner, read its
instructions.
To quit the screen
1) Select [QUIT].
L
2) When [QUIT?] appears, select [YES].
22
PC OPERATION
File Backup on a Windows® PC
Install the software that came with the camera
to your PC.
For the compatible DVD burners, refer to
CyberLink web site:
powerproducer/3/comp_dvd_drives.jsp
You can back up your files on your PC with a
simple one-touch operation, edit your files on
your PC, and also create discs.
Even if you do not install the software, you
can still back up your files on your PC.
(੬ pg. 27)
NOTE
The system requirements information is not
a guarantee that the provided software will
work on all personal computers meeting those
requirements.
System Requirements
OS:
Either one of the following OS should be pre-
installed (32-bit):
Windows® XP Home Edition (SP2), Windows®
XP Professional (SP2), Windows VistaTM
Home Basic, Windows VistaTM Home Premium
CPU:
Intel® Pentium® 4, at least 1.6 GHz
(at least 2.2 GHz recommended)
Intel® Pentium® M, at least 1.4 GHz
Intel® CoreTM Duo, at least 1.5 GHz
RAM:
[XP] At least 256 MB (For creating DVD Video
by PowerCinema, 1 GB or more)
[Vista] At least 1 GB (2 GB or more
recommended)
Free hard disk space:
At least 550 MB for installation
For creating DVD Video, at least 10 GB
recommended
For creating VCD, at least 1 GB
recommended
USB port:
USB 2.0 port
Display:
Must be capable of displaying at least
1024 x 768 (XGA) in high color 16 bit or higher
(1280 x 1024 (SXGA) or higher is recommended)
Miscellaneous:
Internet Explorer 5.5 or later
DirectX 9.0 or later
Supported media:
DVD-Video: DVD-R/-RW, DVD+R/+RW
DVD-VR: DVD-RW, DVD-RAM
DVD+VR: DVD+RW
VideoCD: CD-R/RW
23
File Backup on a Windows® PC (Continued)
You can find the latest information on the
Software Installation
provided software program at CyberLink’s
co.jp/products/ne/
Please read the “JVC SOFTWARE LICENCE
AGREEMENT” in the CD-ROM instruction
before you install software.
The following software is included in the CD-
ROM that came with your camera.
Preparation:
Quit any other software you are using. (Check
that there are no other application icons on
the status bar.)
CyberLink DVD Solution
•
Comprehensive application software that
consists of the following three kinds of
software.
1
Load the provided CD-ROM into the
PC.
PowerCinema NE for Everio
After a moment, the [SETUP] screen
appears. If the [SETUP] screen does not
appear, double-click the CD-ROM icon in
[My Computer].
The main file managing software.You can
perform various operations such as file
backup, playback, and DVD authoring.
Q
T
U
2
Click [Easy Installation].
If you want to specify the type of software
to install or the installation destination
folder etc., select [Custom Installation].
Follow the instructions on the screen to
install the software.
R
V
W
X
Y
S
Q You can perform detailed settings for each
item.
R Select a function on the right, and the
explanation of function is displayed.
S Displays operating procedure for each
function. (internet connection is required)
T Plays back video files on the PC
U Plays back still image files on the PC
V Copies/edits files on the PC
W Burns file that are backed up on the PC
onto a DVD
3
Click [Yes].
X Creates a DVD-Video
Y Backs up camera files onto the PC
(੬ pg. 26)
PowerProducer 3 NE
Allows you to create discs. Automatically
starts from an operation in PowerCinema
NE for Everio.
PowerDirector 5 NE Express
Allows you to edit files on your PC.
Automatically starts from an operation in
PowerCinema NE for Everio.
Digital Photo Navigator 1.5
Allows you to change the format of still
image files backed up on your PC.
•
24
4
5
Select the desired language and
click [OK].
Connecting the Camera to the PC
Preparation:
Close the LCD monitor to turn off the camera.
Click [Yes].
The software installation starts.
DC Jack
USB Jack
USB Cable
AC Adapter
To AC Outlet
6
Click [Finish].
USB Port
LWhen installation is completed
NOTES
The installed software is displayed in [All
Programs].
Never disconnect the USB cable while the
access/charge lamp on the camera lights or
blinks.
•
Do not turn off the camera when the USB
cable is connected, to prevent malfunctions
of the PC.
•
Connect the camera directly to the USB jack
on the PC, not through a hub.
•
Do not use an extension USB cable.
Saving the wrong kinds of files in a
•
•
recording medium or deleting files or
folders from a recording medium can cause
problems with the operation of the camera.
When it is necessary to delete a file from
a recording medium, delete it through the
camera. Also, do not move or rename
folders and files in the medium on PC.
The backup destination folder [MyWorks]
for files is created on the hard disk drive
that has the most free space.
25
File Backup on a Windows® PC (Continued)
LWhen you have finished operation
1
Open the LCD monitor to turn on the
Always follow the procedures below when
disconnecting the camera, or turning off
the power of the camera/PC.
camera.
2
On the camera, press the DIRECT
BACK UP button.
Failing to do so may cause damage to the
camera and PC.
1) Confirm that the access/charge lamp on
the camera does not light or blink. (If the
access/charge lamp lights or blinks, wait
until it is turned off before proceeding.)
2) Double-click the [Safely Remove
Hardware] or [Unplug or Eject
Although a dialog box appears on the PC,
you do not need to use it. File copy starts
automatically.
Hardware] icon in the status bar.
3) Select [USB Mass Storage Device] or
[USB Disk], and then click [Stop].
4) Click [OK].
5) Disconnect the USB cable.
6) Turn off the camera and PC.
When the progress bar disappears, the
process is complete.
File Backup on the PC
NOTE
This method uses the software on the
provided CD-ROM to back up files onto your
PC.
When backup is performed, folders for each
medium (HDD or microSD) are created in the
[MyWorks] folder (੬ pg. 25), and the files are
backed up inside those folders. (If backup is
performed from more than one camera HDD,
individual HDD folders are created.)
Video files that have never been backed up
onto the connected PC are automatically
selected from the back up history and backed
up.
If you could not install the software, turn to
page 27 for details of how to back up your
files without using this software.
File Backup from a Specified Media
Preparation:
Preparation:
Install the software from the provided CD-
ROM. (੬ pg. 24)
•
Install the software from the provided CD-
ROM. (੬ pg. 24)
•
Connect the camera to the PC with the USB
cable. (੬ pg. 25)
•
Connect the camera to the PC with the USB
cable. (੬ pg. 25)
•
1
Open the LCD monitor to turn on the
camera.
2
On the camera, select [BACK UP].
26
3
5
Click [EVERIO_HDD] or [EVERIO_
SD].
When the progress bar disappears, the
process is complete.
Select the folder you want to back
up, and drag & drop it into the folder
you created in step 1.
SD_VIDEO:
•
Folder that contains video files. If you
want to back up files individually, open
this folder, and drag & drop files such as
[PRG001] one by one.
DCIM:
•
Folder that contains still image files. If
you want to back up files individually,
open this folder, and drag & drop files
such as [PIC_0001.JPG] one by one.
File Backup on the PC without Using
Software
Preparation:
Connect the camera to the PC with the USB
cable. (੬ pg. 25)
1
On the PC, create a folder to back up
files into.
NOTE
For further details on the use of folders, see
page 29.
2
Open the LCD monitor to turn on the
camera.
3
On the camera, select [PLAYBACK
ON PC].
4
Double-click [EVERIO_HDD] or
[EVERIO_SD] icon.
27
Other Windows® PC Operations
Digital Photo Navigator 1.5
Getting More Use of the Software
The User’s Guide is included on the CD-ROM
in PDF format.
For more information on operations of the
software, see the Tutorials for each software
program or the User’s Guides.
1
Load the provided CD-ROM into the
PC.
PowerCinema NE for Everio
2
Right-click the CD-ROM icon in [MY
1
Computer], then click [Open].
Double-click the PowerCinema NE
for Everio icon.
Start PowerCinema NE for Everio.
3
Double-click the [DOCS] folder.
2
Click [Tutorial].
4
Open the “Start.pdf” file and click the
button of the desired language.
PowerProducer 3 NE
NOTES
You need to connect to the Internet to see
•
the Tutorial.
Adobe® Acrobat® ReaderTM or Adobe®
1
Click [Start], go to [All Programs],
select [CyberLink PowerProducer].
•
Reader® must be installed to read PDF
files. Adobe® Reader® can be loaded from
2
Click [PowerProducer User’s Guide]
or [Readme].
PowerDirector 5 NE Express
1
Click [Start], go to [All Programs],
select [Cyber Link PowerDirector
Express].
2
Click [PowerDirector Express User’s
Guide] or [Readme].
28
Folder Structure and Extensions
Recording medium
X = number
[DCIM]
Contains the still image folders.
[XXXJVCSO]
[XXXJVCSO]
[XXXJVCSO]
[SD_VIDEO]
[MGR_INFO]
[PRGXXX]
[PRGXXX.PGI]
Contains the video file folders.
Management information* for the media as a
whole
Management information*
Video file
Management information* for the video files
[MOVXXX.MOD]
[MOVXXX.MOI]
[PRGXXX]
[PRGXXX]
[EXTMOV]
Video file which management information is
corrupted.
[MOV_XXX.MOD]
[DEM_XXX.MPG]
Demo video file
[MISC]
[PRIVATE]
Contains folders with DPOF setting data.
Contains management information files of event
and/or DVD creation information for the files taken
with the camera.
* Information such as the date and time of recording, recorded with the video file.
Extensions
Video files
Still image files
: “.MOD”
: “.jpg”
For Windows®, the file extension may not appear depending on the [FOLDER] option setting.
29
File Backup on a Macintosh®
You can back up camera files onto your
computer.
When you copy files from the computer to
•
the recording medium on the camera, do not
include any other files than those recorded
with the camera.
Do not delete, move, or rename the files and
folders in the camera from the computer.
System Requirements
•
Hardware:
Macintosh must be standard equipped with
USB 2.0 port
OS:
LWhen you have finished operation
Always follow the procedures below when
disconnecting the camera, or turning the
power of the camera/computer off.
Failing to do so may cause damage to the
camera and computer off.
1) Drag & drop the recording medium icon
on the desktop into the [Trash] icon.
If the confirmation message appears,
click [OK].
2) Confirm that the access/charge lamp on
the camera does not light or blink.
If the access/charge lamp lights or
blinks, wait until it is turned off before
proceeding.
Mac OS X (v10.3.9, v10.4.2 to v10.4.10)
Connecting the Camera to the
Macintosh
Preparation:
Close the LCD monitor to turn off the camera.
3) Disconnect the USB cable.
4) Turn off the camera and computer.
DC Jack
USB Jack
USB Cable
AC Adapter
To AC Outlet
USB Port
NOTES
Never disconnect the USB cable while the
access/charge lamp on the camera lights or
blinks.
•
Do not turn off the camera when the USB
cable is connected, to prevent malfunctions
of the PC.
•
Connect the camera directly to the
computer, not through a hub.
Do not use an extension USB cable.
•
•
30
DCIM:
•
File Backup on the Macintosh
Folder that contains still image files. If
you want to back up files individually,
open this folder, and drag & drop files
such as [PIC_0001.JPG] one by one.
Preparation:
Connect the camera to the computer with the
USB cable. (੬ pg. 30)
1
On the computer, create a folder to
back up files into.
2
Open the LCD monitor to turn on the
camera.
3
On the camera, select [PLAYBACK
ON PC].
NOTE
4
Double-click [EVERIO_HDD] or
[EVERIO_SD] icon.
For further details on the use of folders, see
page 29.
5
Select the folder you want to back
up, and drag & drop it into the folder
you created in step 1.
SD_VIDEO:
•
Folder that contains video files. If you
want to back up files individually, open
this folder, and drag & drop files such as
[PRG001] one by one.
31
Customer Support Information
Contact us for Information on the Provided Software
Use of this software is authorized according to the terms of the software license.
JVC
When contacting the nearest JVC office or agency in your country (refer to the JVC Worldwide
software, please have the following information ready.
Product Name
Model
Problem
PC
•
•
•
•
•
Manufacturer
Model (Desktop/Laptop)
CPU
OS
Error Message
Memory (MB)
Available Hard Disk Space (GB)
Please note that it may take some time to respond to your questions, depending on their subject
matter.
JVC cannot answer questions regarding basic operation of your PC, or questions regarding
specifications or performance of the OS, other applications or drivers.
CyberLink
Telephone/fax support
Office hours
(Mon. to Fri.)
Location
Language
Phone #
Fax #
English / German /
French / Spanish /
Italian / Dutch
9:00 am to
5:00 pm
Germany
+49-700-462-92375 +49-241-70525-25
9:00 am to
6:00 pm
+886-2-8667-1298
+886-2-8667-1300
ext. 333
Taiwan
Japan
Mandarin
Japanese
10:00 am to
5:00 pm
+81-3-3516-9555
–
Paid voice support
Lines are open
(Mon. to Fri.)
Location
Language
English
URL
1:00 pm to
10:00 pm CST
support/new_site/voice_support.jsp
U.S.A.
Support web/e-mail
Language
URL/e-mail address
English
German / French /
Spanish / Italian
Japanese
32
FURTHER INFORMATION
Troubleshooting
The camera is a microcomputer-controlled
device. External noise and interference (from
a TV, a radio, etc.) might prevent it from
functioning properly.
To solve the problem, first follow the
instructions below.
If the problem is not solved, reset the
camera. (੬ below)
If the problem persists, please consult your
nearest JVC dealer.
•
•
•
The following phenomena are not
malfunctions.
LTo reset the camera
The camera heats up when it is used for a
long time.
•
1) Close the LCD monitor to turn off the
camera and remove the power supply
(battery pack or AC adapter) from the
camera, then reattach it.
The battery heats up during charging.
When playing back a video file, the
image stops momentarily or the sound is
interrupted at junctions between scenes.
•
•
2) Select [FACTORY PRESET] from the
MENU.
Trouble
Action
੬
Connect the AC adapter securely.
Detach the battery pack once again and reattach it firmly.
Replace the dead battery with a fully charged one.
14
14
–
•
•
•
•
No power is supplied.
The power does not
turn on, or the battery
operation time is
extremely short even
after the battery is fully
charged.
Make sure to use the camera under appropriate operating
temperatures.
The battery is worn out and needs to be replaced. Please
purchase a new one.
36
–
•
Charging may stop in places subject to extremely high/low
temperatures to protect the battery. It is recommended
to charge it in places with a temperature of 10°C to 35°C
(50°F to 95°F).
When the battery is already fully charged, the lamp does
not light. Check the remaining battery power.
–
•
The access/charge
lamp on the camera
does not light during
charging.
15
20
•
•
Recording medium is full. Delete unnecessary files or
replace the microSD card.
Select the recording medium properly.
Recording cannot be
performed.
–
•
•
During recording, the
date/time does not
appear.
Touch the DISP button once.
13
The temperature of the camera is increasing. If the
camera continues to heat up, recording may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
–
•
During video recording,
the 7REC indicator
flashes.
Change the settings in [ZOOM].
Digital zoom is not available in the still image recording
mode.
–
–
•
•
Digital zoom does not
work.
33
Troubleshooting (Continued)
Trouble
Action
੬
Set [FOCUS] to [AUTO].
–
The focus is not
adjusted automatically.
•
•
•
Clean the lens and check the focus again.
34
The continuous shooting speed will drop after repeated
continuous shots, depending on the recording media, or
under certain recording conditions.
–
The continuous
shooting speed is slow.
Select the recording medium properly.
To watch images on a TV, set the TV’s input mode or
channel that is appropriate for video playback.
–
19
•
•
Playback cannot be
performed.
The temperature of the camera is increasing. If the
camera continues to heat up, playback may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
–
•
During video playback,
the Findicator flashes.
Remove protection from the files and delete them.
21
20
Files cannot be deleted.
•
•
The data process is too
slow after the power
is switched on or the
mode is changed.
There is a large number of still images (approx. 1,000 or
more) stored in the recording medium. Copy the stored
files to other devices, and delete them from the recording
medium.
The microSD card
cannot be removed
from the camera.
Push the microSD card in a few more times.
–
–
•
•
The [CREATE DVD]
screen is displayed in
the LCD monitor, and
no other operations
can be performed.
Another operation is being attempted while a DVD burner
that is turned on is connected. Turn off the camera
connected to the DVD burner, or disconnect the USB
cable.
The touch sensor or
sensor button does not
function.
Touch the sensors with your finger. The sensors do not
function if you touch them with your finger nail or with
gloves on.
6
•
Cleaning
Before cleaning, turn off the camera and remove the battery pack and AC adapter.
LTo clean the exterior
Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild
soap and wring it out well before wiping. Then wipe again with a dry cloth.
LTo clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to damage the monitor.
LTo clean the lens
Wipe gently with lens cleaning paper.
NOTES
Avoid using strong cleaning agents such as benzine or alcohol.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth, refer to the cautions for each product.
•
•
•
34
Warning Indications
Indication
Meaning/Action
੬
Displays the remaining battery power.
–
•
•
High
Exhausted
(Battery indicator)
As the battery power comes close to nil, the battery
indicator blinks. When the battery power is exhausted,
power turns off automatically.
–
Appears when the date/time is not set.
14
14
•
•
The built-in clock’s rechargeable lithium battery is
discharged, so the previously set date/time is erased.
Connect the camera to an AC outlet using the AC adapter
for over 24 hours to charge the clock’s lithium battery. Then
set the date/time.
SET DATE/TIME!
Appears for 5 seconds after power is turned on in recording
mode if the lens cover is closed or when it is dark.
–
•
CHECK LENS COVER
Perform clean up to restore the capacity of the recording media.
Turn off the camera. Remove the microSD card and insert it
again. Turn on the camera after inserting the microSD card.
If the error message appears again, replace the card with
one that is certified to operate correctly.
It is also recommended to run check disc regularly on the
PC, providing that there is no data on the hard disk of the
camera.
–
–
•
•
HDD ERROR!
MEMORY CARD ERROR!
–
–
•
•
VIDEO MANAGEMENT
FILE IS BROKEN.TO
RECORD/PLAYBACK
VIDEO, RECOVERY IS
REQUIRED. RECOVER?
The video management file is broken. Recovery is required
to record or play back video files. Select [YES], then touch
the OK button to recover the video management file.
CAN NOT READ EVENT
INFORMATION
Appears when the event information cannot be read.
Register the file to an event.
–
–
•
•
The writing speed of recording medium is slow, or the
recording medium is corrupted. Use a microSD card that is
guaranteed to operate correctly.
The hard disk was subjected to vibrations or jolts. Be careful
not to subject the hard disk to vibrations or jolts.
Appears when the recording medium is full and recording
is not possible. Delete unnecessary files, or replace the
microSD card.
–
•
•
RECORDING FAILURE
20
Appears when an incompatible USB device is connected to
the camera.
Appears when a DVD burner that is switched off is
connected. If you want to use the DVD burner, switch the
power on.
–
–
•
•
POWER IS OFF,
OR USB DEVICE IS
UNSUPPORTED
DROP DETECTION
WORKED AND THE
POWER IS TURNED OFF
To turn on the camera again, close the LCD monitor and
open it again.
–
•
35
Specifications
LFor video/Audio
Camera
Format
SD-VIDEO
Recording/Playback format
Video: MPEG-2
Audio: Dolby Digital (2 ch)
Signal format
NTSC standard
LFor general
Power supply
DC 11 V (Using AC adapter)
DC 7.2 V (Using battery pack)
Power consumption
Approx. 3.2 W*
Recording mode (video)
ULTRA FINE: 720 x 480 pixels, 8.5 Mbps (VBR)
FINE: 720 x 480 pixels, 5.5 Mbps (VBR)
NORMAL: 720 x 480 pixels, 4.2 Mbps (VBR)
ECONOMY: 352 x 240 pixels, 1.5 Mbps (VBR)
Recording mode (audio)
ULTRA FINE: 48 kHz, 384 kbps
FINE: 48 kHz, 384 kbps
* When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Dimensions (W x H x D)
113 mm x 68 mm x 54 mm
(4-1/2" x 2-11/16" x 2-3/16")
Weight
Approx. 315 g (0.69 lbs)
(incl. grip belt)
NORMAL: 48 kHz, 256 kbps
ECONOMY: 48 kHz, 128 kbps
Approx. 360 g (0.79 lbs)
(incl. battery and grip belt)
Operating temperature
0°C to 40°C (32°F to 104°F)
Operating humidity
35% to 80%
Storage temperature
–20°C to 50°C (–4°F to 122°F)
Pickup
1/6" (1,070,000 pixels) CCD
Lens
Video: F1.8 to 4.5, f = 2.5 mm to 80 mm,
32:1 power zoom lens
Still image: F 1.9 to 4.5, f = 2.9 mm to 80 mm,
27:1 power zoom lens
Filter diameter
LFor still image
Format
JPEG
Image size
2 modes (1152 x 864 / 640 x 480)
Picture quality
2 modes (FINE/STANDARD)
LFor connectors
AV input/output
Video input: 0.8 V (p-p) ~ 1.2 V (p-p), 75 Ω
Video output: 1.0 V (p-p), 75 Ω
Audio intput: 300 mV (rms), 50 kΩ
Audio output: 300 mV (rms), 1 kΩ
USB
ø30.5 mm
LCD monitor
2.7" diagonally measured, LCD panel/TFT
active matrix system
Mini USB type A and type B, USB 2.0
compliant
Speaker
Monaural
AC Adapter
LED Light
Power requirement
AC 110 V to 240 Vd, 50 Hz/60 Hz
Output
Within 1.5 m (4.9 ft)
(recommended shooting distance)
Language
English/French/Spanish/Portuguese/
Japanese/Korean/Traditional Chinese
DC 11 V
, 1 A
§
36
Dimensions (W x H x D)
42 mm x 14.5 mm x 91 mm
(1-11/16" x 5/8" x 3-5/8")
Weight
Approx. 30 g (0.07 lbs)
(incl. battery)
Remote Control
Power supply
DC 3 V
Battery life
Approx. 1 year (depending on the frequency of
use)
Operating distance
Within 5 m (16.4 ft)
Operating temperature
0°C to 40°C (32°F to 104°F)
Design and specifications subject to change
without notice.
Approximate recording time (minutes) (for video)
Recording medium
HDD
microSD Card
60 GB
860
4 GB
57
Quality
ULTRA FINE
FINE
1280
1700
4500
85
NORMAL
ECONOMY
113
298
Approximate number of storable images (for still image)
Recording medium
Image size/Quality
1152 x 864 / FINE
HDD
microSD Card
60 GB
9999
9999
9999
9999
256 MB
535
512 MB
1065
1 GB
2140
3265
6205
8865
2 GB
4095
6145
9999
9999
4 GB
8045
9999
9999
9999
1152 x 864 / STANDARD
640 x 480 / FINE
820
1625
1555
2225
3090
640 x 480 / STANDARD
4420
Required charging/recording time (approx.)
* When the LED light is off and the monitor backlight is set to [STANDARD] mode.
Battery pack
Charging time
1 hr. 30 min.
Recording time
1 hr. 30 min.*
BN-VF808U
(Provided)
BN-VF815U
BN-VF823U
2 hr. 40 min.
3 hr. 50 min.
3 hr. 5 min.*
4 hr. 35 min.*
37
Cautions
AC Adapter
Recording Medium
When using the AC adapter in areas other
than the USA
The provided AC adapter features automatic
voltage selection in the AC range from 110 V to
240 V.
USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit’s power cord to
an AC wall outlet other than American National
Standard C73 series type use an AC plug
adapter, called a “Siemens Plug”, as shown.
For this AC plug adapter, consult your nearest
Be sure to follow the guidelines below
to prevent corruption or damage to your
recorded data.
•
Do not bend or drop the recording medium, or
•
subject it to strong pressure, jolts or vibrations.
Do not splash the recording medium with water.
Do not use, replace, or store the recording
medium in locations that are exposed to strong
static electricity or electrical noise.
•
•
Do not turn off the camera power or remove
•
the battery or AC adapter during shooting,
playback, or when otherwise accessing the
recording medium.
JVC dealer.
Plug Adapter
Do not bring the recording medium near objects
that have a strong magnetic field or that emit
strong electromagnetic waves.
•
Do not store the recording medium in locations
with high temperature or high humidity.
•
Do not touch the metal parts.
•
When formatting or erasing data using the
camera, only the file administration information
is changed. The data is not completely erased
from the hard disk. If you want to completely
erase all of the data, we recommend either
using commercially available software that
is specially designed for that purpose, or
by physically destroying the camera with a
hammer etc.
•
Battery Packs
The supplied battery pack is Terminals
a lithium-ion battery. Before
using the supplied battery
pack or an optional battery
pack, be sure to read the
following cautions:
To avoid hazards
•
LCD Monitor
... do not burn.
... do not short-circuit the terminals. Keep it away
from metallic objects when not in use. When
transporting, make sure the provided battery
cap is attached to the battery. If the battery
cap is misplaced, carry the battery in a plastic
bag.
... do not modify or disassemble.
... do not expose the battery to temperatures
exceeding 60°C, as this may cause the battery
to overheat, explode or catch fire.
... use only specified chargers.
To prevent damage to the LCD monitor, DO
NOT
•
... push it strongly or apply any shocks.
... place the camera with LCD monitor on the
bottom.
•
To prolong service life
... avoid rubbing it with coarse cloth.
To prevent damage and prolong service life
•
... do not subject to unnecessary shock.
... charge within the temperature range of 10°C
to 35°C (50°F to 95°F). This is a chemical
reaction type battery — cooler temperatures
impede chemical reaction, while warmer
temperatures can prevent complete charging.
... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
... fully charge and then fully discharge the
battery every 6 months when storing the
battery pack over a long period time.
... remove from charger or powered unit when
not in use, as some machines use current
even when switched off.
38
Declaration of Conformity
Model Number: GZ-MG465U
Main Unit
Trade Name: JVC
For safety, DO NOT
•
Responsible party: JVC AMERICAS CORP.
Address: 1700 Valley Road Wayne, N. J. 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
... open the camera’s chassis.
... disassemble or modify the unit.
... allow inflammables, water or metal objects to
enter the unit.
... remove the battery pack or disconnect the
power supply while the power is on.
... leave the battery pack attached when the
camera is not in use.
... place naked flame sources, such as lighted
candles, on the apparatus.
... expose the apparatus to dripping or splashing.
... leave dust or metal objects adhered to the
power plug or an AC wall outlet.
... insert any objects in the camera.
Avoid using the unit
Changes or modifications not approved
by JVC could void the user’s authority to
operate the equipment. This equipment has
been tested and found to comply with the
limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures: Reorient or relocate the receiving
antenna. Increase the separation between the
equipment and receiver.
•
... in places subject to excessive humidity or dust.
... in places subject to soot or steam such as
near a cooking stove.
... in places subject to excessive shock or
vibration.
... near a television set.
... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
... in places subject to extremely high (over 40°C)
or extremely low (under 0°C) temperatures.
... in places where the air pressure is low (more
than 3000 m (9870 ft) above the sea level).
DO NOT leave the unit
•
... in places of over 50°C.
... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
... in high places such as on a TV. Leaving the
unit in high places while a cable is connected
may result in a malfunction if the cable is
caught and the unit falls onto the floor.
To protect the unit, DO NOT
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/
TV technician for help.
•
... allow it to become wet.
... drop the unit or strike it against hard objects.
... subject it to shock or excessive vibration
during transportation.
... keep the lens directed at extremely bright
objects for long periods.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
... expose the lens to direct sunlight.
... swing it excessively when using the hand
strap.
... swing the soft camera case excessively when
the camera is inside it.
To prevent the unit from dropping,
•
•
Attach the shoulder strap securely and fasten
the grip belt securely.
When using the camera with a tripod, attach the
camera to the tripod securely.
•
If the camera drops, you may be injured and
the camera may be damaged.
When a child uses the unit, there must be
parental guidance.
39
Terms
A
M
AC Adapter ...................................................... 14, 38
Macintosh .............................................................. 30
B
P
Battery Pack .............................................. 14, 15, 38
Power-Linked Operation ........................................ 10
Protecting Files ...................................................... 20
C
Clock Adjust ........................................................... 14
Copying (Moving) Still Images ......................... 23, 30
Copying Video Files ......................................... 23, 30
R
Recordable Time/Number of Images ..................... 37
Recording Medium ................................................ 38
Remote Control ............................................... 10, 15
Resetting the Camera ............................................ 33
D
Deleting Files ......................................................... 20
DVD Burner ........................................................... 22
S
Slide Show ............................................................. 18
Speaker Volume ..................................................... 18
Still Image .............................................................. 17
E
Everio Dock ............................................................. 9
T
H
TV .......................................................................... 19
Hard Disk ............................................................... 38
V
I
Video ..................................................................... 16
Image Rotation ...................................................... 18
W
L
Windows PC .......................................................... 23
Language Setting .................................................. 14
LCD Monitor .............................................. 10, 12, 38
40
MEMO
Términos
A
I
Adaptador de CA ............................................. 14, 38
Ajuste del idioma ................................................... 14
Ajuste del reloj ....................................................... 14
Imagen fija ............................................................. 17
M
Macintosh .............................................................. 30
Mando a distancia ........................................... 10, 15
B
Base de conexión Everio ......................................... 9
Batería ....................................................... 14, 15, 38
P
Pantalla LCD .............................................. 10, 12, 38
PC con Windows ................................................... 23
Protección de archivos .......................................... 20
C
Copia (traslado) de archivos de imagen fija .... 23, 30
Copia de archivos de vídeo ............................. 23, 30
R
D
Reproducción automática ...................................... 18
Restablecimiento de la cámara ............................. 33
Disco duro ............................................................. 38
E
S
Eliminación de archivos ......................................... 20
Soporte de grabación ............................................ 38
F
T
Funcionamiento siempre listo para grabar ............ 10
Televisor ................................................................. 19
Tiempo de grabación/número de imágenes .......... 37
G
Giro de las imágenes ............................................. 18
Grabadora de DVD ................................................ 22
V
Vídeo ..................................................................... 16
Volumen del altavoz ............................................... 18
Printed in Malaysia
1007FOH-AL-VM
US
© 2007 Victor Company of Japan, Limited
|