CD RECEIVER
KD-SX870/KD-SX770
KD-SX870/KD-SX770
KD-SX870/KD-SX770
RECEPTOR CON CD
RECEPTEUR CD
KD-SX870
SCM
DISP
4V OUT
INT
7
8
9
10
11
12
SCAN
MO
KD-SX770
SCM
DISP
INT
7
8
9
10
11
12
SCAN
MO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Model No.
Serial No.
GET0019-001A
[J]
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit .................................................................... 2
BASIC O PERATIO N S .................................................... 5
RADIO O PERATIO N S ................................................... 6
Listening to the radio ..................................................................... 6
Storing stations in memory ............................................................ 7
FM station automatic preset: SSM ............................................... 7
Manual preset.............................................................................. 8
Tuning into a preset station ........................................................... 9
Other convenient tuner functions................................................ 10
Scanning broadcast stations ......................................................10
Selecting FM reception sound....................................................10
CD O PERATIO N S ....................................................... 1 1
Playing a CD ................................................................................. 11
Locating a track or a particular portion on a CD ..................... 12
Selecting CD playback modes...................................................... 13
Prohibiting CD ejection ............................................................... 14
SO UN D ADJUSTMEN TS ............................................. 1 5
Adjusting the sound...................................................................... 15
Turning on/off the BBEII function ............................................... 16
Using the Sound Control Memory (SCM).................................. 17
Storing your own sound adjustments ......................................... 19
O THER MAIN FUN CTIO N S ......................................... 2 0
Setting the clock ............................................................................ 20
Changing the general settings (PSM) ........................................ 21
Basic Procedure ........................................................................ 21
Canceling Advanced SCM .........................................................23
Selecting the level display ......................................................... 23
Selecting the dimmer mode (ONLY FOR KD-SX870) ................ 24
Turning on/off the key-touch tone ...............................................24
Selecting the external component to use ................................... 25
Detaching the control panel ......................................................... 26
REMO TE O PERATIO N S ............................................... 2 7
Installing the battery .................................................................... 27
Using the remote controller ......................................................... 28
To be continued on the next page
3
CD CHAN GER O PERATIO N S ...................................... 2 9
Playing CDs ................................................................................... 29
Selecting CD playback modes...................................................... 31
EXTERN AL CO MPO N EN T O PERATIO N S ..................... 3 2
Playing an external component ................................................... 32
MAIN TEN AN CE......................................................... 3 3
Handling CDs ................................................................................ 33
TRO UBLESHO O TIN G ................................................. 3 4
SPECIFICATIO N S ....................................................... 3 5
4
BASIC OPERATIONS
1
Note:
When you use this unit for the
first time, set the built-in clock
correctly, see page 20.
3
2
1
Turn on the power.
“HELLO” appears on the display.
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
2
3
Select the source.
To operate the tuner, see pages 6 – 10.
To operate the CD player, see pages 11 – 14.
To operate the CD changer, see pages 29 – 31.
To operate the external component, see page 32.
Adjust the volume.
Volume level appears
Volume level indicator
4
Adjust the sound as you want (see pages 15 – 19).
To d ro p th e vo lu m e in a m o m e n t
Press
briefly while listening to any source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To tu rn o ff th e p o w e r
Press
for more than 1 second. “SEE YOU” appears, then the unit turns off.
CAUTION on Volume Setting
CDs produces very little noise compared with other sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged by the sudden increase in the output level.
Therefore, lower the volume before playing a CD and adjust it as required during playback.
5
RADIO OPERATIONS
Listening to the radio
1
2
1
2
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an FM
station.
FM1
FM2
FM3
AM
Audio (see page 23) or Selected band appears.
volume level indicator.
To search stations
of higher
frequencies.
Start searching a station.
While searching stations, “SEEK”appears on
the display.
When a station is received, searching stops.
To search stations
of lower
frequencies.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tu n e in a p a rticu la r fre q u e n cy w ith o u t se a rch in g
1 Press FM/AM repeatedly to select the band (FM or AM).
2 Press and hold ¢
Now you can manually change the frequency while “MANU” is flashing.
3 Press ¢ or 4 repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing until you release the button.
or 4
until “MANU (manual)” starts flashing on the display.
6
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
• Manual preset of both FM and AM stations
FM sta tio n a u to m a tic p re se t: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
1
2
1
2
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
FM1
FM2
FM3
AM
Press and hold both buttons for more than
2 seconds.
“SSM” appears, then disappears when
automatic preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3).These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
7
Ma n u a l p re se t
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
3
1
2
1
2
Select the FM1 band.
Tune into a station of 88.3 MHz.
See page 6 to tune into a station.
3
Press and hold the number button (in this
example, 1) for more than 2 seconds.
Selected band and “MEMO”
flash alternately for a while.
4
Repeat the above procedure to store other
stations into other preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
8
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 7
and 8.
2
1
1
2
Select the band (FM1, FM2, FM3 or AM)
you want.
FM1
FM2
FM3
AM
Select the number (1 – 6) for the preset station
you want.
9
Other convenient tuner functions
SCAN/RPT
MO/RND
Sca n n in g b ro a d ca st sta tio n s
When you press SCAN/RPT (Scan/Repeat) while listening to the radio, station scanning starts.
Each time a broadcast is tuned in, scanning stops for about 5 seconds (“SCAN” flashes on
the display), and you can check what program is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.
Se le ctin g FM re ce p tio n so u n d
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The MONO
indicator lights up on the display.
The sound you hear becomes monaural but reception will be improved.
MO
Lights up when receiving an FM broadcast in stereo.
To restore the stereo effect, press the same button again.
10
CD OPERATIONS
Playing a CD
1
1
2
Open the control panel.
1. Insert a disc into the loading slot.
The unit turns on, draws a CD and starts playback
automatically.
2. Close the control panel by hand.
Total playing time of Total track number Elapsed
the inserted disc
of the inserted disc playing time
Current track
Notes:
• When a CD is inserted up side down, “PLEASE” and “EJECT” appear on the display alternately.
When you open the control panel by pressing 0, the CD automatically ejects.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing CD turns on the unit and starts playback
automatically.
To sto p p la y a n d e je ct th e CD
Press 0.
CD play stops, the control panel opens, then the CD automatically ejects from the loading slot.
If you change the source to FM, AM, CD changer or external component, the CD play also
stops (without ejecting the CD this time).
• If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will not start this time.)
• You can eject the CD even when the unit is turned off.
11
Locating a track or a particular portion on a CD
¢
Number buttons
4
To fa st-fo rw a rd o r re ve rse th e tra ck
Press and hold ¢
, while playing a CD, to fast-forward the track.
Press and hold 4 , while playing a CD, to reverse the track.
To g o to th e n e x t tra ck s o r th e p re vio u s tra ck s
Press ¢
briefly, while playing a CD, to go ahead to the beginning of
the next track.Each time you press the button consecutively, the beginning
of the next tracks is located and played back.
Press 4
briefly, while playing a CD, to go back to the beginning of
the current track. Each time you press the button consecutively, the
beginning of the previous tracks is located and played back.
To g o to a p a rticu la r tra ck d ire ctly
Press the number button corresponding to the track number to start its
playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
12
Selecting CD playback modes
SCAN/RPT MO/RND
To p la y b a ck tra ck s a t ra n d o m (Ra n d o m Pla y )
You can play back all tracks on the CD at random.
MO
Each time you press MO/RND (Mono/Random) while playing a CD, CD
random play mode turns on and off alternately.
When the random mode is turned on, the RND indicator lights up on the
display and a track randomly selected starts playing.
To p la y b a ck tra ck s re p e a te d ly (Re p e a t Pla y )
You can play back the current track repeatedly.
SCAN
Each time you press SCAN/RPT (Scan/Repeat) while playing a CD, CD
repeat play mode turns on and off alternately.
When the repeat mode is turned on, the RPT indicator lights up on the
display.
Track number of the currently playing track
13
INT
To p la y b a ck o n ly in tro s (In tro Sca n )
Each time you press INT (Intro) briefly while playing a CD, CD intro scan
mode turns on and off alternately.
INT
When the intro scan mode is turned on, “INT” appears on the display for 5
seconds and the track number flashes. The first 15 seconds of each track
are played sequentially.
Track number of the currently playing track
Prohibiting CD ejection
You can prohibit CD ejection and can lock a CD in the loading slot.
While pressing CD, press and hold
for more than 2 seconds. “NO EJECT” flashes
on the display for about 5 seconds, and the CD is locked and cannot be ejected.
To cancel the prohibition and unlock the CD, press
again for more than 2 seconds,
while pressing CD. “EJECT OK” flashes on the display for about 5 seconds, and the CD is
unlocked.
14
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your preference.
2
Equalization pattern indicator
1
1
Select the item you want to adjust.
Indication
To do:
Range
BAS
Adjust the bass
–06 (min.) — +06 (max.)
(Bass)
TRE
Adjust the treble
–06 (min.) — +06 (max.)
(Treble)
FAD
(Fader)*
Adjust the front and rear speaker
balance
R06 (rear only) — F06 (front only)
L06 (left only) — R06 (right only)
00 (min.) — 50 (max.)
BAL
Adjust the left and right speaker
(Balance) balance
VOL
Adjust the volume
(Volume)
Note:
* If you are using a two-speaker system, set the fader level to “00.”
2
Adjust the level.
Equalization pattern changes as you adjust the bass or treble.
Note:
Normally the control dial works as the volume control. So you do not have to select “VOL” to
adjust the volume level.
15
Turning on/off the BBEII function
The BBEII* function restores the brilliance and clarity of the original live sound in recording,
broadcasts, etc.
When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing
high-frequency sounds to take longer to reach the ear than low frequency sounds.The BBEII
function adjusts the phase relationship between the low, mid and high frequencies by adding
a progressively longer delay time to the low and mid frequencies, so that all frequencies
reach the listener’s ears at the proper time.
In addition, the BBEII function boosts low and high frequencies, which loudspeakers tend to
be less efficient in reproducing, through dynamic, program-driven augmentation. When
combined with the phase compensation feature, the resulting sound has a clearer, more
finely detailed “live” presence.
BBE
Each time you press BBE, the BBEII function changes as follows.
As the number gets higher, the BBEII function becomes stronger. The initial setting is BBE 2.
* Under license from BBE Sound, Inc.
is a trademark of BBE Sound, Inc.
R
16
Using the Sound Control Memory (SCM)
You can select and store a preset sound adjustment suitable to each playback source.
(Advanced SCM)
Se le ctin g a n d sto rin g th e so u n d m o d e s
Once you select a sound mode, it is stored in memory, and will be recalled every time you
select the same source. A sound mode can be stored for each of the following sources —
FM1, FM2, FM3, AM, CD and external components.
• If you do not want to store the sound mode separately for each playback source, but want to
use the same sound mode for all the sources, see “Canceling Advanced SCM” on page 23.
SCM
Select the sound mode you want.
Each time you press the button, the sound mode changes as follows:
SCM
• When “SCM LINK” is set to “LINK ON”, the selected sound mode can
be stored in memory for the current source and the effect applies only
to the current source. Each time you change the playback source, the
SCM indicator flashes on the display.
• When “SCM LINK” is set to “LINK OFF”, the selected sound mode
effect applies to any source.
Indication
For:
Preset values
Bass
00
Treble
00
BBEII
BBE 2
BBE 2
Off
SCM OFF
BEAT
(Flat sound)
Rock or disco music
Quiet background music
Light music
+02
+01
+04
00
SOFT
–03
+01
POP
Off
17
Re ca llin g th e so u n d m o d e s
1
1
Select the source while the “SCM” indicator is lit
on the display.
The “SCM” indicator starts flashing, and the sound mode stored
in memory for the selected source is recalled.
Sound mode indicator
Notes:
• You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”
on page 19.
• To adjust the bass and treble reinforcement levels or to turn on/off the BBEII function temporarily,
see pages 15 and 16. (Your adjustments will be canceled if another source is selected.)
18
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 17) to your preference and
store your own adjustments in memory.
2
2
1 ,3
2
1
2
SCM
Call up the sound mode you want to adjust.
See page 18 for details.
W ith in
5 se co n d s
2
To adjust the bass or treble level
1 Select “BAS” or “TRE.”
1
W ith in
5 se co n d s
2 Adjust the bass or treble level.
To turn on or off the BBEII function
See page 16.
W ith in
5 se co n d s
3
4
Press and hold SCM (Sound Control Memory)
until the sound mode you have selected
flashes on the display.
Your setting is stored in memory.
SCM
Repeat the same procedure to store other settings.
To re se t to th e fa cto ry se ttin g s
Repeat the same procedure and reassign the preset values listed in the table on page 17.
19
OTHER MAIN FUNCTIONS
Setting the clock
2 ,3
DISP
2 ,3
1 ,4
1
2
Press and hold SEL (Select) for more than 2 seconds
so that one of the PSM items appears on the display.
2
1
1
Set the hour.
1 Select “CLOCK H (Hour)” if not
shown on the display.
2 Adjust the hour.
3
4
2
Set the minute.
1 Select “CLOCK M (Minute).”
2 Adjust the minute.
Finish the setting.
To check the current clock time while the unit is turned off, press DISP.
The power turns on, the clock time is shown for 5 seconds, then the power turns off.
To check the other information during play
Press DISP (Display). Each time you press the button, the other information (either the clock
or the source name) will be shown on the lower part of the display for a while.
20
Changing the general settings (PSM)
You can change the items listed on the next page by using the PSM (Preferred Setting Mode)
control.
Ba sic Pro ce d u re
3
2
1 ,4
1
Press and hold SEL (Select) for more than 2
seconds so that one of the PSM items
appears on the display.
2
3
Select the PSM item you want to adjust. (See
page 22.)
Select or adjust the PSM item selected above.
4
Finish the setting.
21
3
2
1
Factory-preset See
settings
page
Select.
Set.
Back
Back
Advance
Advance
1:00
20
20
CLOCK H
CLOCK M
SCM LINK
Hour adjustment
1:00
Minute adjustment
Sound control
LINK ON
AUDIO 2
LINK OFF
AUDIO 1
LINK ON
23
23
memory linkage
LEVEL
Level display
AUDIO 2
OFF
ON
DIMMER
(ONLY FOR KD-SX870)
Dimmer
OFF
AUTO
AUTO
24
BEEP
Key-touch tone
External component
24
25
OFF
ON
ON
LINE IN
CHANGER
CHANGER
EXT IN
*
Displayed only when one of the following source is selected — FM, AM and CD.
*
• Press SEL (Select) when the setting is complete.
22
Ca n ce lin g Ad va n ce d SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
• LINK ON: Advanced SCM (different sound modes for different sources)
• LINK OFF: Conventional SCM (one sound mode for all sources)
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “SCM LINK” with ¢
or 4
.
3. Select the desired mode with the control dial.
The SCM LINK mode changes as follows:
LINK ON
LINK OFF
Se le ctin g th e le ve l d isp la y
You can select the level display according to your preference.When shipped from the factory,
“AUDIO 2” is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator
• AUDIO 2: Alternates “AUDIO 1” setting and illumination display
• OFF:
Erases the audio level indicator and the equalization pattern indicator
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “LEVEL” with ¢
or 4
.
3. Select the desired mode with the control dial.
The level display setting changes as follows:
AUDIO 1
AUDIO 2
OFF
23
Se le ctin g th e d im m e r m o d e (O N LY FO R KD-SX8 7 0 )
When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• AUTO: Activates Auto Dimmer
• OFF: Cancels Auto Dimmer
• ON:
Always dims the display
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “DIMMER” with ¢
or 4
.
3. Select the desired mode with the control dial.
The dimmer mode changes as follows:
AUTO
OFF
ON
Note on Auto Dimmer:
Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF”.
Tu rn in g o n / o ff th e k e y -to u ch to n e
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. When shipped from the factory, the key-touch tone is activated.
• ON: Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “BEEP” with ¢
or 4
.
3. Select the desired mode with the control dial.
The key-touch tone alternates between on and off.
ON
OFF
24
Se le ctin g th e e x te rn a l co m p o n e n t to u se
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
To use the external component as the playback source through this unit, you need to select
which component — CD changer or external component — to use. When shipped from the
factory, CD changer is selected as the external component.
• LINE IN:
• CHANGER:
To use the external component other than CD changer
To use the CD changer
1. Change the source to FM, AM or CD with FM/AM or CD button.
2. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
3. Select “EXT IN” with ¢
or 4
.
4. Select the desired mode with the control dial.
The external component selecting mode changes as follows:
LINE IN
CHANGER
Note:
For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
25
Detaching the control panel
You can detach the control panel when leaving the car.
When detaching or attaching the control panel, be careful not to damage the connectors on
the back of the control panel and on the panel holder.
Ho w to d e ta ch th e co n tro l
p a n e l
Ho w to a tta ch th e co n tro l
p a n e l
Before detaching the control panel, be sure
to turn off the power.
1
Insert the right side of the
1
control panel into the groove
on the panel holder.
Unlock the control panel.
2
2
Press the left side of the
control panel to fix it to the
panel holder.
Pull the control panel out of
the unit.
3
Put the detached control
panel into the provided case.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
Connectors
26
REMOTE OPERATIONS
Remote sensor
Before using the remote controller:
• Aim the remote controller directly at the remote sensor
on the main unit. Make sure there is no obstacle in
between.
• Do not expose the remote sensor to strong light (direct
sunlight or artificial lighting).
Installing the battery
When the controllable range or effectiveness of the remote controller decreases, replace
the battery.
1. Remove the battery holder.
1) Push out in the direction indicated by the arrow
using a ball point pen or a similar tool.
2) Remove the battery holder.
(back side)
1)
2)
Lithium coin battery
(product number:
CR2025)
2. Place the battery.
Slide the battery into the holder with the + side facing
upwards so that the battery is fixed in the holder.
3. Return the battery holder.
Insert again the battery holder pushing it until you
hear a clicking sound.
(back side)
WARNING:
• Store the batteries in a place which children cannot reach.
If a child accidentally swallows the battery, immediately consult a doctor.
• Do not recharge, short, disassemble or heat the batteries or dispose of in a fire.
Doing any of these things may cause the batteries to give off heat, crack or start a fire.
• Do not leave the batteries with other metallic materials.
Doing this may cause the batteries to give off heat, crack or start a fire.
• When throwing away or saving the batteries, wrap in tape and insulate; otherwise, , it may cause
the batteries to give off heat, crack or start a fire.
• Do not poke the batteries with tweezers or similar tools.
Doing this may cause the batteries to give off heat, crack or start a fire.
27
Using the remote controller
1 Functions the same as the
button on the main unit.
2 • Functions as the BAND button while listening to the radio.
Each time you press the button, the band changes.
• Functions as the DISC + button while listening to the CD
changer.
Each time you press the button, the disc number increases,
and the selected disc starts playing.
• Does not function as the PROG/DISC + button.
3 • Functions as the PRESET button while listening to the
radio.
5
6
1
2
3
4
7
Each time you press the button, the preset station number
increases, and the selected station is tuned in.
• Functions as the DISC – button while listening to the CD
changer.
Each time you press the button, the disc number
decreases, and the selected disc starts playing.
4 Functions the same as the control dial on the main unit.
Note: This button does not function for the preferred setting mode
adjustment.
5 Select the sound mode.
Each time you press SCM (Sound Control Memory), the mode
changes.
6 Select the source.
Each time you press FUNC (Function), the source changes.
7 • Searches stations while listening to the radio.
• Fast forwards or reverses the track if pressed and held
while listening to a CD.
• Skips to the beginning of the next tracks or goes back to
the beginning of the current (or previous tracks) if pressed
briefly while listening to a CD.
28
CD CHANGER OPERATIONS
We recommend that you use one of the CH-X series (ex: CH-X1200) with your unit.
If you have another CD automatic changer, consult your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K)
for connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your CD changer.
• If no discs are in the magazine of the CD changer or the discs are inserted upside
down, “NO DISC” will appear on the display. If this happens, remove the magazine and
set the discs correctly.
• If “RESET 1 - RESET 8”appears on the display, something is wrong with the connection
between this unit and the CD changer. If this happens, check the connection, connect
the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.
Playing CDs
¢
CD-CH
Number buttons
4
Select the CD automatic changer.
Playback starts from the first track of the first disc.
All tracks of all discs are played back.
Elapsed playing time
Track number
Disc number appears.
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
29
To fa st-fo rw a rd o r re ve rse th e tra ck
Press and hold ¢ , while playing a CD, to fast-forward the track.
Press and hold 4 , while playing a CD, to reverse the track.
To g o to th e n e x t tra ck s o r th e p re vio u s tra ck s
Press ¢ briefly, while playing a CD, to go ahead to the beginning of
the next track.Each time you press the button consecutively, the beginning
of the next tracks is located and played back.
Press 4
briefly, while playing a CD, to go back to the beginning of
the current track. Each time you press the button consecutively, the
beginning of the previous tracks is located and played back.
To g o to a p a rticu la r d isc d ire ctly
Press the number button corresponding to the disc number to start its
playback (while the CD changer is playing).
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
Ex. When disc number 3 is selected
Track number
Disc number
30
Selecting CD playback modes
To p la y b a ck tra ck s a t ra n d o m (Ra n d o m Pla y )
Each time you press MO/RND (Mono/Random) while playing a CD, CD
MO
random play mode changes as follows:
RND1 RND2
(Random1)
(Random2)
Canceled
Mode
RND Indicator
Plays at random
RND1
Lights
All tracks of the current disc, then the tracks of the
next disc, and so on.
RND2
Flashes
All tracks of all discs inserted in the magazine.
To p la y b a ck tra ck s re p e a te d ly (Re p e a t Pla y )
Each time you press SCAN/RPT (Scan/Repeat) while playing a CD, CD
repeat play mode changes as follows:
SCAN
RPT1
RPT2
(Repeat2)
(Repeat1)
Canceled
Mode
RPT Indicator
Plays repeatedly
RPT1
RPT2
Lights
The current track (or specified track).
Flashes
All tracks of the current disc (or specified disc).
To p la y b a ck o n ly in tro s (In tro Sca n )
Each time you press INT (Intro) briefly while playing a CD, CD intro scan
mode changes as follows:
INT
INT1
INT2
(Intro1)
(Intro2)
Canceled
Mode
INT1
Indication
Plays the beginnings (15 seconds)
Track number
flashes
Of all tracks on all inserted discs.
Disc number
flashes
INT2
Of the first track on each inserted disc.
31
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
3
1
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See “Selecting the external component to use” on page 25.)
1
Select the external component.
* Displayed only when one of the following sources is selected
— FM, AM and CD.
• If “LINE IN”* does not appear on the display, see page 25
and select the external input (“EXT IN”).
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
2
3
Turn on the connected component and start playing the
source.
Adjust the volume.
32
MAINTENANCE
Handling CDs
COMPACT
This unit has been designed only to reproduce the CDs bearing the
Other discs cannot be played back.
marks.
DIGITAL AUDIO
Ho w to h a n d le CDs
When removing a CD from its case, press down the center holder of the case and
lift the CD out, holding it by the edges.
Center holder
• Always hold the CD by the edges. Do not touch its recording surface.
When storing a CD into its case, gently insert the CD around the center holder
(with the printed surface facing up).
• Make sure to store CDs into the cases after use.
To k e e p CDs cle a n
A dirty CD may not play correctly. If a CD does become dirty, wipe it with a soft cloth in
a straight line from center to edge.
To p la y n e w CDs
New CDs may have some rough spots around the inner and outer edges. If such a CD
is used, this unit may reject the CD.
To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.
Mo istu re co n d e n sa tio n
Moisture may condense on the lens inside the CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may malfunction. In this case, eject the CD and leave
the unit turned on for a few hours until the moisture evaporates.
CAUTIONS:
•
•
•
Do not insert 8cm (3 3/16") CDs (single CDs) into the loading slot. (Such CDs cannot be ejected.)
Do not insert any CD of unusual shape – like a heart or flower; otherwise, it will cause a malfunction.
Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high temperature and
humidity. Do not leave them in a car.
•
Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean CDs.
W h e n p la y in g a CD-R (Re co rd a b le )
You can play back your original CD-Rs on this receiver.
• Before playing back CD-Rs, read their instructions or cautions carefully.
• Some CD-Rs recorded on CD recorders may not be played back on this receiver because of their disc
characteristics, and of the following reasons:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens inside the unit.
– The pickup lens inside the CD player is dirty.
• Use only “finalized” CD-Rs.
• CD-RWs (Rewritable) cannot be played back on this receiver.
• Do not use the CD-Rs with stickers or sticking labels on the surface. They may cause malfunctions.
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the unit and
the CD, but will be annoying.
We recommend that you stop CD play while driving on such rough roads.
33
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a
service centre.
Symptoms
Causes
Remedies
• CD cannot be played back.
CD is inserted upside down.
Insert the CD correctly.
• CD sound is sometimes
interrupted.
You are driving on rough roads.
Stop CD play while driving on
rough roads.
CD is scratched.
Change the CD.
Connections are incorrect.
Check the cords and
connections.
• Sound cannot be heard from
the speakers.
The volume is set to the
minimum level.
Adjust it to the optimum level.
Connections are incorrect.
Signals are too weak.
Check the cords and
connections.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Store stations manually.
• Static noise while listening to
the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
Insert CD.
• “NO DISC” appears on the
display.
No CD is in the loading slot (or
in the magazine).
CD is inserted incorrectly.
Insert it correctly.
• “RESET 8” appears on the
display.
This unit is not connected to a
CD changer correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
• “RESET 1-RESET 7” appears
on the display.
Press the reset button of the
CD changer.
• CD can be neither played
back nor ejected.
The CD player may function
incorrectly.
Press CD and SEL at the same
time for several seconds.
(“PLEASE” and “EJECT” appear
on the display alternately.) When
you open the control panel by
pressing 0, be careful not to drop
CD when it is ejected.
• This unit does not work at all.
• The CD changer does not
work at all.
The built-in microcomputer may
function incorrectly due to noise,
etc.
Press the reset button on the
panel holder. (The clock setting
and preset stations stored in
memory are erased.) (See page
2.)
34
SPECIFICATIONS
AUDIO AMPLIFIER SECTIO N
Maximum Power Output:
CD PLAYER SECTIO N
Type: Compact disc player
Front: 45 W per channel
Rear: 45 W per channel
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Continuous Power Output (RMS):
Front: 17 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8 % total harmonic distortion.
Rear: 17 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8 % total harmonic distortion.
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass: ±10 dB at 100 Hz
Treble:±10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Dynamic Range: 96 dB
Signal-to-Noise Ratio: 98 dB
GEN ERAL
Power Requirement:
Operating Voltage: DC 14.4 V (11 V to 16 V
allowance)
Allowable Working Temperature:
0°C to +40°C (32°F to 104°F)
Grounding System: Negative ground
Dimensions (W x H x D):
Installation Size:
KD-SX870: 4.0 V/20 kΩ load (full scale)
KD-SX770: 2.0 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
182 mm x 52 mm x 150 mm
(7-3/16" x 2-1/16" x 5-15/16")
Panel Size: 188 mm x 58 mm x 14 mm
(7-7/16" x 2-5/16" x 7/16")
Mass:1.4 kg (3.1 lbs) (excluding accessories)
TUN ER SECTIO N
Frequency Range:
Design and specifications subject to change
without notice.
FM: 87.5 MHz to 107.9 MHz
AM: 530 kHz to 1 710 kHz
[FM Tuner]
If a kit is necessary for your car, consult
your telephone directory for the nearest
car audio speciality shop.
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
Capture Ratio: 1.5 dB
[AM Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
35
|