JVC Car Stereo System KD R421 User Manual

Having TROUBLE with operation?  
ENGLISH  
Please reset your unit  
Refer to page of How to reset your unit  
FRANÇAIS  
KD-R521/KD-R422/  
Vous avez des PROBLÈMES de fonctionnement?  
Réinitialisez votre appareil  
Référez-vous à la page intitulée Comment réinitialiser votre appareil  
KD-R421/KD-R45  
CD RECEIVER / RÉCEPTEUR CD  
Dear Customer,  
Cher(e) client(e),  
This apparatus is in conformance with the valid  
European directives and standards regarding  
electromagnetic compatibility and electrical safety.  
Cet appareil est conforme aux directives et  
normes européennes en vigueur concernant la  
compatibilité électromagnétique et à la sécurité  
électrique.  
European representative of Victor Company of  
Japan, Limited is:  
JVC Technical Services Europe GmbH  
Postfach 10 05 04  
Représentant européen de la société Victor  
Company of Japan, Limited:  
JVC Technical Services Europe GmbH  
Postfach 10 05 04  
61145 Friedberg  
Germany  
61145 Friedberg  
Allemagne  
For canceling the display demonstration, see page 4. / Pour annuler la démonstration des  
affichages, référez-vous à la page 4.  
For installation and connections, refer to the separate manual.  
Pour l’installation et les raccordements, se référer au manuel séparé.  
INSTRUCTIONS  
MANUEL D’INSTRUCTIONS  
EN, FR  
GET0705-003A  
© 2010 Victor Company of Japan, Limited  
1010DTSMDTJEIN  
[E/EU]  
CoverRear_KD-R521_003A_1.indd 1-2  
9/7/10 5:20:05 PM  
Thank you for purchasing a JVC product.  
Please read all instructions carefully before operation, to ensure your complete understanding and  
to obtain the best possible performance from the unit.  
IMPORTANT FOR LASER PRODUCTS  
1.CLASS 1 LASER PRODUCT  
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave  
all servicing to qualified service personnel.  
3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with  
optical instruments.  
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.  
WARNING:  
Stop the car before operating the unit.  
Caution:  
Battery  
Adjust the volume so that you can hear sounds  
Products  
outside the car. Driving with the volume too  
high may cause an accident.  
Information for Users on Disposal of  
Old Equipment and Batteries  
[European Union only]  
These symbols indicate that the product and  
the battery with this symbol should not be  
disposed as general household waste at its  
end-of-life.  
Caution on volume setting:  
Digital devices (CD/USB) produce very little  
noise compared with other sources. Lower the  
volume before playing these digital sources to  
avoid damaging the speakers by the sudden  
increase of the output level.  
If you wish to dispose of this product and  
the battery, please do so in accordance with  
applicable national legislation or other rules  
in your country and municipality.  
By disposing of this product correctly, you  
will help to conserve natural resources and  
will help prevent potential negative effects  
on the environment and human health.  
Caution for DualDisc playback:  
The Non-DVD side of a “DualDisc” does not  
comply with the “Compact Disc Digital Audio”  
standard. Therefore, the use of Non-DVD side  
of a DualDisc on this product may not be  
recommended.  
Condensation : When the car is air-  
conditioned, moisture may collect on the  
laser lens. This may cause disc read errors. In  
this case, remove the disc and wait for the  
moisture to evaporate.  
Notice:  
The sign Pb below the symbol for batteries  
indicates that this battery contains lead.  
Temperature inside the car : If you have  
parked the car for a long time in hot or cold  
weather, wait until the temperature in the car  
becomes normal before operating the unit.  
JVC bears no responsibility for any loss of data  
in an iPod/iPhone and/or USB mass storage  
class device while using this System.  
2
ENGLISH  
EN02-19_KD-R521_003A_f.indd  
2
10/13/10 12:45:32 PM  
How to attach/detach the control  
panel  
CONTENTS  
3
How to attach/detach the control  
panel  
3
3
3
How to reset your unit  
How to forcibly eject a disc  
Maintenance  
3
4
About discs  
Canceling the display  
How to reset your unit  
demonstration  
Setting the clock  
Basic operations  
4
5
6
8
9
Your preset adjustments will  
also be erased.  
Listening to the radio  
Listening to a disc  
Connecting the other external  
How to forcibly eject a disc  
components  
9
Listening to the other external  
components  
[Hold]  
10 Listening to a USB device  
11 Listening to an iPod/iPhone  
• Be careful not to drop the disc when it ejects.  
• If this does not work, reset your unit.  
(Available for KD-R521)  
12 Selecting a preset sound mode  
13 Menu operations  
15 Using the remote controller  
(For KD-R521/KD-R422/KD-R421: optionally  
purchased)  
Maintenance  
Cleaning the unit  
Wipe off the dirt on the panel with a dry silicon  
or soft cloth. Failure to observe this precaution  
may result in damage to the unit.  
16 Troubleshooting  
18 Using Bluetooth® devices  
19 Specifications  
Cleaning the connector  
Wipe off dirt on the connector of the unit and  
panel. Use a cotton swab or cloth.  
About discs  
This unit can only play the CDs with:  
Handling discs:  
• Do not touch the recording surface of the  
disc.  
• Do not stick tape etc. on the disc, or use a disc  
with tape stuck on it.  
• Do not use any accessories for the disc.  
• Clean from the center of the disc and move  
outward.  
• Clean the disc with a dry silicon or soft cloth.  
Do not use any solvents.  
• When removing discs from this unit, pull them  
out horizontally.  
Discs that cannot be used:  
• Discs that are not round.  
• Discs with coloring on the recording surface  
or discs that are dirty.  
• You cannot play a Recordable/ReWritable  
disc that has not been finalized. (For the  
finalization process refer to your disc writing  
software, and your disc recorder instruction  
manual.)  
• Remove the rims from the center hole and  
disc edge before inserting a disc.  
• 3-inch CD cannot be used. Attempt to insert  
using an adapter can cause malfunction.  
ENGLISH  
3
EN02-19_KD-R521_003A_f.indd  
3
10/13/10 12:45:33 PM  
Canceling the display demonstration  
Display demonstration will be activated automatically if no operation is done for about 20 seconds.  
1 Turn on the power.  
4 Select <DEMO OFF>.  
[Hold]  
2
[Hold]  
5
(Initial setting)  
6 Finish the procedure.  
3
(Initial setting)  
Setting the clock  
1 Turn on the power.  
6 Adjust the minute.  
[Hold]  
2
[Hold]  
(Initial setting)  
3 Select <CLOCK>.  
4 Select <CLOCK SET>.  
5 Adjust the hour.  
7 Select <24H/12H>.  
8 Select <24 HOUR> or  
<12 HOUR>.  
9 Finish the procedure.  
(Initial setting)  
4
ENGLISH  
EN02-19_KD-R521_003A_f.indd  
4
10/13/10 12:45:33 PM  
Basic operations  
Loading slot  
Display window  
Ejects the disc  
Control dial  
Front auxiliary  
input jack  
Remote sensor (for KD-R521/KD-R422/KD-R421)  
You can control this unit with an optionally  
purchased remote control, RM-RK52 (page 15, 16).  
Detaches the panel  
USB (Universal Serial  
Bus) input terminal  
When you press or hold the following button(s)...  
Button  
General operation  
• Turns on/off [Hold].  
• Selects the sources (FM, CD, USB or USB-IPOD, F-AUX, BT AUDIO or R-AUX or  
BT PHONE, AM). “CD” or “USB” is selectable only when a disc is loaded or a USB  
device is connected.  
/ SOURCE  
Control dial  
(turn)  
• Adjusts the volume level.  
• Selects items.  
• Mutes the sound during playback. If the source is “CD” or “USB/USB-IPOD”  
playback pauses. Press the button again to cancel muting or resume playback.  
• Confirms selection.  
Control dial  
(press)  
• Selects the sound mode.  
• Enters tone level adjustment directly [Hold]. (page 12)  
EQ  
BRIGHTNESS Enters <BRIGHTNESS> menu directly. (page 13)  
• Activates/deactivates TA Standby Reception.  
• Enters PTY Searching mode [Hold].  
T/P BACK  
DISP  
• KD-R521: Selects the controlling terminal of an iPod/iPhone [Hold]. (page 11)  
• Returns to the previous menu.  
• Exit from the menu [Hold].  
• Changes the display information.  
• Scrolls the display information [Hold].  
KD-R521/KD-R422/KD-R421 is equipped with the steering wheel remote control function.  
• For details, refer also to the instructions supplied with the remote adapter.  
ENGLISH  
5
EN02-19_KD-R521_003A_f.indd  
5
10/13/10 12:45:34 PM  
Listening to the radio  
• [Press] Searches for stations automatically.  
• [Hold] Searches for stations manually.  
“M” flashes, then press the button  
repeatedly.  
~
Ÿ
]
“FM” or “AM”  
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.  
Improving the FM reception  
Manual presetting (FM/AM)  
You can preset up to 18 stations for FM and 6  
stations for AM.  
1
[Hold]  
1
2
]
Tune in to a station you want to  
preset.  
]
<TUNER>  
]
<MONO>  
]
<MONO ON>  
Reception improves, but stereo effect  
will be lost.  
2
3
[Hold]  
“PRESET MODE” flashes.  
To restore the stereo effect, repeat the same  
procedure to select <MONO OFF>.  
Automatic presetting (FM)—  
SSM (Strong-station Sequential Memory)  
]
Selects preset number.  
You can preset up to 18 stations for FM.  
Preset number flashes and “MEMORY”  
appears.  
While listening to a station...  
1
Selecting a preset station  
1
[Hold]  
2
or  
2
]
<TUNER>  
]
<SSM>  
]
<SSM 01 – 06 / 07 – 12 / 13 – 18>  
“SSM” flashes and local stations with the  
strongest signal are searched and stored  
automatically.  
Changing the display information (for non-  
Radio Data System station)  
To preset another 6 stations, repeat the  
above procedure by selecting one of the other  
SSM setting ranges.  
Frequency  
j
Clock  
6
ENGLISH  
EN02-19_KD-R521_003A_f.indd  
6
10/13/10 12:45:34 PM  
• To activate the reception, tune in to another  
station providing Radio Data System signals  
required for TA Standby Reception.  
• To deactivate the reception, press T/P BACK  
again.  
The following features are available  
only for FM Radio Data System stations.  
Searching for your favourite  
FM Radio Data System  
programme—PTY Search  
NEWS Standby Reception  
NEWS Standby Reception allows the unit to  
switch temporarily to your NEWS programme  
from any source other than AM.  
You can tune in to a station broadcasting your  
favourite programme by searching for a PTY  
code.  
1
To activate NEWS Standby Reception, see  
[Hold]  
<NEWS-STBY>. (page 14)  
The last selected PTY code appears.  
2
Tracing the same programme—  
Network-Tracking Reception  
When driving in an area where FM reception is  
not sufficient enough, this unit automatically  
tunes in to another FM Radio Data System  
station of the same network, possibly  
broadcasting the same programme with  
stronger signals.  
]
Select one of your favourite  
programme types or a PTY code, and  
start searching.  
If there is a station broadcasting a  
programme of the same PTY code as you  
have selected, that station is tuned in.  
To change the Network-Tracking Reception  
setting, see <AF-REG>. (page 14)  
PTY codes: NEWS, AFFAIRS, INFO, SPORT,  
EDUCATE, DRAMA, CULTURE, SCIENCE,  
VARIED, POP M (music), ROCK M (music),  
EASY M (music), LIGHT M (music), CLASSICS,  
OTHER M (music), WEATHER, FINANCE,  
CHILDREN, SOCIAL, RELIGION, PHONE IN,  
TRAVEL, LEISURE, JAZZ, COUNTRY,  
NATION M (music), OLDIES, FOLK M (music),  
DOCUMENT  
Automatic station selection—  
Programme Search  
Usually when you select a preset number, the  
station preset in that number is tuned in.  
If the signals from the FM Radio Data System  
preset station are not sufficient for good  
reception, this unit, using the AF data, tunes in  
to another frequency possibly broadcasting the  
same programme as the original preset station  
is broadcasting.  
Standby receptions  
TA Standby Reception  
To activate Programme Search, see  
<P-SEARCH>. (page 14)  
TA Standby Reception allows the unit to switch  
temporarily to Traffic Announcement (TA) from  
any source other than AM.  
Changing the display information  
To activate TA Standby Reception  
If the TP indicator lights up, TA  
Standby Reception is activated.  
If the TP indicator flashes, TA  
Standby Reception is not yet  
activated.  
Station name (PS)  
Frequency Programme type  
(PTY) Clock  
beginning)  
=
Station  
=
=
=
(back to the  
ENGLISH  
7
EN02-19_KD-R521_003A_f.indd  
7
10/13/10 12:45:34 PM  
Listening to a disc  
Playback starts automatically.  
All tracks will be played repeatedly until you change the  
source or eject the disc.  
Stopping playback and ejecting  
the disc  
Selecting a track/folder from the  
list  
If the ejected disc is not  
removed within 15 seconds, it  
will automatically reload into  
the loading slot.  
• If the MP3/WMA disc contains many tracks,  
you can fast search ( 10, 100) through the  
disc by turning the control dial quickly.  
• To return to the previous menu, press  
T/P BACK.  
Basic operations  
Selects folder of the MP3/WMA.  
Selecting the playback modes  
You can use only one of the following playback  
modes at a time.  
[Press]Selects track.  
[Hold] Fast-forwards  
or reverses the track.  
1
[Hold]  
Changing the display information  
2
Disc title/Album name/performer (folder  
]
“REPEAT”  
j
“RANDOM”  
name)*  
=
Track title (file name)*  
=
Current  
3
track number with the elapsed playing time  
=
=
Current track number with the clock time  
(back to the beginning)  
* “NO NAME” appears for conventional CDs or if  
not recorded.  
REPEAT  
TRACK RPT : Repeats current track  
FOLDER RPT : Repeats current folder  
RANDOM  
FOLDER RND : Randomly plays all tracks  
of current folder, then  
tracks of next folders  
ALL RND  
: Randomly plays all tracks  
To cancel repeat play or random play, select  
“RPT OFF” or “RND OFF.”  
8
ENGLISH  
EN02-19_KD-R521_003A_f.indd  
8
10/13/10 4:16:29 PM  
Connecting the other external components  
You can connect an external component to the auxiliary input jack on the control panel (F-AUX)  
and/or on the rear side of the unit (R-AUX).  
Summary of using the external components through the auxiliary input jacks:  
Preparation  
Menu setting Sub-  
Connecting  
cable/device  
(not supplied)  
Auxiliary  
input jack  
Source  
name  
External component  
Setting  
item  
item  
Portable audio  
player  
Front  
Rear  
SRC SELECT F-AUX ON  
SRC SELECT R-AUX ON  
F-AUX  
R-AUX  
See below.  
Bluetooth device Rear  
SRC SELECT R-AUX BT ADAPTER BT AUDIO/ KS-BTA100  
BT PHONE* (page 18)  
* ”BT PHONE” appears when a Bluetooth phone is in use.  
On the control panel (F-AUX):  
On the rear panel (R-AUX):  
3.5 mm stereo mini plug  
(with “L” shaped connector)  
(not supplied)  
3.5 mm stereo mini plug  
(not supplied)  
Portable audio player,  
etc.  
Portable audio player,  
etc.  
Recommended to use a 3-terminal plug head stereo mini plug for  
optimum audio output.  
Listening to the other external components  
For details, refer also to the instructions supplied with the external components.  
Turn on the connected component and  
start playing the source.  
~
Ÿ
]
“F-AUX” or “R-AUX”  
ENGLISH  
9
EN02-19_KD-R521_003A_f.indd  
9
10/13/10 12:45:35 PM  
Listening to a USB device  
You can operate the USB device in the same way you operate the files on a disc. (page 8)  
• This unit can play MP3/WMA files stored in a USB mass storage class device (such as a USB  
memory, Digital Audio Player, etc.).  
[Hold]  
~
Ÿ
USB input terminal  
USB cable (not supplied)  
]
Turn on the power.  
All tracks will be played repeatedly until you change the source or disconnect the USB  
device.  
Cautions:  
• Make sure all important data has been backed  
up.  
• Depending on the shape of the USB devices  
and connection ports, some USB devices may  
not be attached properly or the connection  
might be loose.  
• This unit cannot recognize a USB device  
whose rating is other than 5 V and exceeds  
500 mA.  
• Do not pull out and attach the USB device  
repeatedly while “READING” is shown on the  
display.  
• This unit may not recognize a memory card  
inserted into the USB card reader.  
• Connect only one USB device to the unit at a  
time. Do not use a USB hub.  
• You cannot connect a computer or portable  
HDD to the USB input terminal of the unit.  
• Avoid using the USB device if it might hinder  
your safety driving.  
• Electrostatic shock at connecting a USB device  
may cause abnormal playback of the device.  
In this case, disconnect the USB device then  
reset this unit and the USB device.  
• Do not leave a USB device in the car, expose  
to direct sunlight, or high temperature to  
avoid deformation or cause damages to the  
device.  
• This unit may not play back files in a USB  
device properly when using a USB extension  
cord.  
• USB devices equipped with special functions  
such as data security functions cannot be  
used with the unit.  
• Operation and power supply may not work as  
intended for some USB devices.  
• The maximum number of characters for:  
–Folder names : 63 characters  
–File names : 63 characters  
–MP3 Tag : 60 characters  
• When connecting a USB cable, use the USB  
2.0 cable.  
• Do not use a USB device with 2 or more  
partitions.  
–WMA Tag : 60 characters  
• This unit can recognize a total of 65 025 files,  
255 folders (255 files per folder including  
folder without unsupported files), and of 8  
hierarchies.  
10  
ENGLISH  
EN02-19_KD-R521_003A_f.indd 10  
10/13/10 12:45:35 PM  
Listening to an iPod/iPhone  
Available for KD-R521  
[Hold]  
~
Ÿ
USB input terminal  
]
Turn on the power.  
USB 2.0 cable (accessory of the iPod/iPhone)  
Apple iPod/iPhone  
All tracks will be played repeatedly until you change the source or disconnect the iPod/  
iPhone.  
Cautions:  
Selecting a track from the menu  
• Avoid using the iPod/iPhone if it might hinder  
your safety driving.  
Not applicable under <IPOD MODE / EXT MODE>.  
1
2
• Make sure all important data has been backed  
up to avoid losing the data.  
Selecting the control terminal  
]
Select the desired menu.  
PLAYLISTS ARTISTS ALBUMS  
PODCASTS  
[Hold]  
j
j
j
j
beginning)  
SONGS  
j
j
GENRES  
]
<HEAD MODE / IPOD MODE / EXT MODE>  
• For details, see <IPOD SWITCH> setting on  
page 15.  
COMPOSERS  
j
(back to the  
3
Basic operations  
Not applicable under <EXT MODE>.  
]
Select the desired track.  
Repeat this step until the desired track  
is selected.  
[Press] Selects track/  
chapter.  
[Hold] Fast-forwards or  
reverses the track.  
• If the selected menu contains many tracks,  
you can fast search ( 10, 100, 1 000,  
10 000) through the menu by turning the  
control dial quickly.  
• To return to the previous menu, press  
T/P BACK.  
Continued...  
ENGLISH  
11  
EN02-19_KD-R521_003A_f.indd 11  
10/13/10 12:45:35 PM  
Changing the display information  
Selecting the playback modes  
• You can use only one of the following  
playback modes at a time.  
Not applicable under <IPOD MODE / EXT MODE>.  
Album name/performer  
Current track number with the elapsed playing  
=
Track title  
=
1
[Hold]  
time  
time  
=
=
Current track number with the clock  
(back to the beginning)  
2
Additional information  
• Made for  
]
“REPEAT”  
j
“RANDOM”  
iPod touch (1st, 2nd, and 3rd generation)  
iPod classic  
iPod with video*  
3
iPod nano (1st*, 2nd, 3rd, 4th, and 5th generation)  
iPhone 4  
iPhone 3GS  
iPhone 3G  
iPhone  
* <IPOD MODE / EXT MODE> are not available.  
• Update iPod/iPhone software to the latest version. For  
details, visit <http://www.apple.com>.  
• It is not possible to browse video files on the “Videos”  
menu in <HEAD MODE>.  
• The song order displayed on the selection menu of  
this unit may differ from that of the iPod.  
• When operating an iPod/iPhone, some operations  
may not be performed correctly or as intended. In this  
jvc.co.jp/english/car/> (English website only).  
REPEAT  
ONE RPT : Functions the same as  
“Repeat One” of the iPod  
ALL RPT : Functions the same as  
“Repeat All” of the iPod  
RANDOM  
ALBUM RND : Functions the same as  
“Shuffle Albums” of the iPod  
SONG RND : Functions the same as  
“Shuffle Songs” of the iPod  
To cancel random play, select “RND OFF.”  
• “ALBUM RND” is not available for some iPod/  
iPhone.  
• To return to the previous menu, press  
T/P BACK.  
Selecting a preset sound mode  
You can select a preset sound mode suitable  
for the music genre.  
2
Adjust the level:  
SUB.W*: 00 to 08  
BASS/ MID/ TRE: –06 to +06  
The sound mode is automatically stored  
and changed to “USER.”  
FLAT  
BOOST  
the beginning)  
=
NATURAL  
=
DYNAMIC  
USER  
=
=
VOCAL  
(back to  
=
BASS BOOST  
=
While listening, you can adjust the subwoofer  
level and tone level of the selected sound mode.  
* Subwoofer level is adjustable only when  
<L/O MODE> is set to <SUB.W>. (page 14)  
1
[Hold]  
12  
ENGLISH  
EN02-19_KD-R521_003A_f.indd 12  
10/13/10 12:45:35 PM  
Storing your own sound mode  
3
4
You can store your own adjustments in  
memory.  
Adjust the sound elements (see table  
below) of the selected tone.  
1
[Hold]  
Repeat steps 2 and 3 to adjust other  
tones.  
2
The adjustments made is automatically  
stored and changed to “USER.”  
] <PRO EQ> ] <BASS/ MIDDLE/ TREBLE>  
Frequency / Level / Q [Initial: Underlined]  
BASS  
60/ 80/ 100/ 200 Hz  
–06 to +06 [ 00 ]  
–06 to +06 [ 00 ]  
–06 to +06 [ 00 ]  
Q1.0/ 1.25/ 1.5/ 2.0  
MIDDLE 0.5/ 1.0/ 1.5/ 2.5 kHz  
TREBLE 10.0/ 12.5/ 15.0/ 17.5 kHz  
Q0.75/ 1.0/ 1.25  
Q FIX  
Menu operations  
Repeat step 2 if necessary.  
• To return to the previous  
menu, press T/P BACK.  
• To exit from the menu, press  
DISP or MENU.  
2
3
1
[Hold]  
If no operation is done  
for about 60 seconds, the  
operation will be canceled.  
Menu item  
Selectable setting, [Initial: Underlined]  
DEMO  
For settings, see page 4.  
For settings, see page 4.  
For settings, see page 4.  
CLOCK SET  
24H/12H  
CLOCK ADJ* 1 AUTO : The built-in clock is automatically adjusted using the CT (clock time) data in the  
Radio Data System signal. / OFF : Cancels.  
DIMMER SET AUTO : Changes the display and button illumination between the Day/Night adjustments  
in <BRIGHTNESS> setting when you turn off/on the car headlights *2. / ON : Selects the  
Night adjustments in <BRIGHTNESS> setting for the display and button illumination. /  
OFF : Selects the Day adjustments in <BRIGHTNESS> setting for the display and button  
illumination.  
BRIGHTNESS DAY  
00  
[
25 ] / NIGHT  
[
11 ] : Selects the display and button illumination brightness level  
[
31] for day and night.  
SCROLL *3  
ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second  
intervals). / OFF : Cancels.  
(Pressing DISP for more than one second can scroll the display regardless of the setting.)  
TAG DISPLAY ON : Shows the Tag information while playing MP3/WMA tracks. / OFF : Cancels.  
1
*
*
Takes effect only when CT (clock time) data is received.  
2
The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting may not work  
correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to  
any other than <DIMMER AUTO>.  
3
*
Some characters or symbols will not be shown correctly (or will be blanked) on the display.  
Continued...  
ENGLISH  
13  
EN02-19_KD-R521_003A_f.indd 13  
10/13/10 12:45:36 PM  
Menu item  
PRO EQ  
FADER *4,  
Selectable setting, [Initial: Underlined]  
For settings, see page 13.  
5
*
R06 — F06  
L06 — R06  
[
[
00 ] : Adjusts the front and rear speaker output balance.  
00 ] : Adjusts the left and right speaker output balance.  
BALANCE *5  
LOUD  
ON : Boost low and high frequencies to produce a well-balanced sound at a low volume  
level. / OFF : Cancels.  
VOL ADJUST –05 — +05 00 ] : Presets the volume adjustment level of each source (except  
[
“FM”), compared to the FM volume level. The volume level will automatically increase or  
decrease when you change the source. Before adjustment, select the source you want to  
adjust. (“VOL ADJ FIX” appears on the display if “FM” is selected as the source.)  
L/O MODE* 6 SUB.W : Selects if the REAR/SW terminals are used for connecting a subwoofer (through  
an external amplifier). / REAR : Selects if the REAR/SW terminals are used for connecting  
the speakers (through an external amplifier).  
SUB.W LPF* 7 LOW 55Hz  
/
LOW 85Hz  
/
LOW 120Hz : Frequencies lower than  
55 Hz/85 Hz/120 Hz are sent to the subwoofer.  
7
*
SUB.W LEVEL  
00 — 08 04 ] : Adjusts the subwoofer output level.  
[
HPF* 6  
ON : Activates the High Pass Filter. Low frequency signals are cut off from the front/rear  
speakers. / OFF : Deactivates (all signals are sent to the front/rear speakers).  
BEEP  
ON OFF : Activates or deactivates the keypress tone.  
/
TEL MUTING* 8 ON : Mutes the sounds while using the cellular phone (not connected through  
KS-BTA100). / OFF : Cancels.  
AMP GAIN* 9 LOW POWER : VOLUME 00 – VOLUME 30 (Selects if the maximum power  
of each speaker is less than 50 W to prevent damaging the speakers.) /  
HIGH POWER : VOLUME 00 – VOLUME 50  
SSM  
Displayed only when the source is “FM.” For settings, see page 6.  
AF-REG*10  
AF ON : When the currently received signals become weak, the unit switches to another  
station (the programme may differ from the one currently received). (The AF indicator  
lights up.) / AF-REG ON : When the currently received signals become weak, the  
unit switches to another station broadcasting the same programme. (The AF and REG  
indicators light up.) / OFF : Cancels.  
NEWS-STBY*10 Displayed only when the source is “FM.” NEWS ON / NEWS OFF : Activates or  
deactivates NEWS Standby Reception.  
P-SEARCH*10 SEARCH ON / SEARCH OFF : Activates Programme Search (if AF-REG is turn on)  
or deactivates.  
MONO  
Displayed only when the source is “FM.” For settings, see page 6.  
IF BAND  
AUTO : Increases the tuner selectivity to reduce interference noises between adjacent  
stations. (Stereo effect may be lost.) / WIDE : Subject to interference noises from  
adjacent stations, but sound quality will not be degraded and the stereo effect will remain.  
4
5
6
7
8
9
*
*
*
*
*
*
If you are using a two-speaker system, set the fader level to “00.”  
For KD-R521/KD-R422/KD-R421: This adjustment will not affect the subwoofer output.  
For KD-R521/KD-R422/KD-R421.  
For KD-R521/KD-R422/KD-R421: Displayed only when <L/O MODE> is set to <SUB.W>.  
This setting does not work if <BT ADAPTER> is selected for <R-AUX> of the <SRC SELECT>.  
The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level set  
higher than “VOLUME 30.”  
10  
*
Only for FM Radio Data System stations.  
14  
ENGLISH  
EN02-19_KD-R521_003A_f.indd 14  
10/15/10 9:05:02 AM  
Menu item  
Selectable setting, [Initial: Underlined]  
IPOD SWITCH* 11  
HEAD MODE : Controls iPod playback through the unit. / IPOD MODE : Controls  
iPod playback through the iPod/iPhone. / EXT MODE : The sound of any functions  
(musics, games, applications, etc.) running on the connected iPod/iPhone is emitted  
through the speakers connected to this unit. The display always show “EXT MODE.”  
AM* 12  
F-AUX* 12  
R-AUX* 12  
ON  
ON  
ON  
/
/
/
OFF : Enable or disable “AM” in source selection.  
OFF : Enable or disable “F-AUX” in source selection.  
OFF : Enable or disable “R-AUX” in source selection. / BT ADAPTER : Selects if  
the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100. (page 9)  
The source name changed to “BT AUDIO.”  
11  
*
*
For KD-R521: Displayed only when “USB-IPOD” is selected.  
Displayed only when any source other than “AM/ F-AUX/ R-AUX/ BT AUDIO” is selected separately.  
12  
Using the remote controller  
KD-R521/KD-R422/KD-R421 can be remotely controlled as instructed here (with an optionally  
purchased remote controller). We recommend that you use remote controller RM-RK52 with your  
unit.  
Installing the lithium coin battery  
(CR2025)  
CR2025  
Caution:  
• Danger of explosion if battery is incorrectly  
replaced. Replace only with the same or  
equivalent type.  
• Battery shall not be exposed to excessive heat  
such as sunshine, fire, or the like.  
1
2
• Mutes the sound during playback. If the  
source is “CD” or “USB/USB-IPOD” playback  
pauses. Press the button again to cancel  
muting or resume playback.  
If the effectiveness of the remote controller  
decreases, replace the battery.  
• Changes the preset stations.  
Before using the remote controller:  
• Changes the folder of the MP3/WMA.  
Adjusts the volume level.  
Selects the sound mode.  
• Aim the remote controller directly at the  
remote sensor on the unit.  
3
4
5
6
• DO NOT expose the remote sensor to bright  
light (direct sunlight or artificial lighting).  
Selects the source.  
• [Press] Searches for stations automatically.  
• [Hold] Searches for stations manually.  
• [Hold] Fast-forwards or reverses the track.  
• [Press] Changes the tracks/chapters.  
Remote sensor  
Continued...  
ENGLISH  
15  
EN02-19_KD-R521_003A_f.indd 15  
10/13/10 12:45:36 PM  
Warning (to prevent accidents and damage):  
• Do not install any battery other than CR2025 or its equivalent.  
• Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for  
a long time.  
• Store the battery in a place where children cannot reach.  
• Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.  
• Do not leave the battery with other metallic materials.  
• Do not poke the battery with tweezers or similar tools.  
• Wrap the battery with tape and insulate when throwing away or saving it.  
Troubleshooting  
Symptom  
Remedy/Cause  
Sound cannot be heard from the  
speakers.  
Adjust the volume to the optimum level. / Make sure the unit is not  
muted/paused. (page 5) / Check the cords and connections.  
“MISWIRING CHK WIRING THEN RESET Check to be sure the terminals of the speaker leads are covered with  
UNIT” appears on the display and no  
operations can be done.  
insulating tape properly, then reset the unit. (page 3)  
If the message does not disappear, consult your JVC IN-CAR  
ENTERTAINMENT dealer or a company supplying kits.  
The unit does not work at all.  
Reset the unit. (page 3)  
“F-AUX” or “R-AUX” cannot be selected. Check the <SRC SELECT>  
Sound is sometimes interrupted while Check to be sure the recommended stereo mini plug is used for  
listening to an external component connection. (page 9)  
connected to the auxiliary input jack.  
The correct characters are not displayed This unit can only display letters (upper case), numbers, and a  
=
<F-AUX / R-AUX> setting. (page 15)  
(e.g. album name).  
limited number of symbols.  
SSM automatic presetting does not  
work.  
Store stations manually.  
Static noise while listening to the radio. Connect the aerial firmly.  
“AM” cannot be selected.  
Disc cannot be played back.  
Check the <SRC SELECT>  
Insert the disc correctly.  
=
<AM> setting. (page 15)  
CD-R/CD-RW cannot be played back  
and track cannot be skipped.  
Insert a finalized CD-R/CD-RW (finalize with the component which  
you used for recording).  
Disc sound is sometimes interrupted.  
Stop playback while driving on rough roads. / Change the disc. /  
Check the cords and connections.  
“NO DISC” appears on the display.  
Insert a playable disc into the loading slot.  
“PLEASE” and “EJECT“ appear  
alternately on the display.  
Press 0, then insert a disc correctly.  
“IN DISC” appears on the display.  
The disc cannot be ejected properly. Make sure nothing is blocking  
the loading slot.  
Disc cannot be played back.  
Use a disc with MP3/WMA tracks recorded in a format compliant  
with ISO 9660 Level 1, Level 2, Romeo, or Joliet. / Add the extension  
code <.mp3> or <.wma> to the file names.  
Noise is generated.  
Skip to another track or change the disc.  
“READING” keeps flashing on the  
display.  
A longer readout time is required. Do not use too many hierarchical  
levels and folders.  
16  
ENGLISH  
EN02-19_KD-R521_003A_f.indd 16  
10/13/10 12:45:36 PM  
Symptom  
Remedy/Cause  
Tracks do not play back in the order you The playback order is determined when the files are recorded.  
have intended them to play.  
The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by how the  
tracks are recorded on the disc.  
“READING” keeps flashing on the  
display.  
A longer readout time is required. Do not use too many hierarchical  
levels and folders. / Turn off the power then on again. / Reattach  
the USB device again.  
“NO FILE” appears on the display.  
Noise is generated.  
Check whether the device contains playable files.  
Skip to another file.  
“NOT SUPPORT” appears and track skips. Check whether the track is a playable file format.  
Tracks/folders are not played back in the The playback order is determined by the file name. Folders with  
order you have intended.  
numbers on the initial of their names are sorted in numerical order.  
However, folders with no numbers on the initial of their names are  
sorted according to the file system of the USB device.  
“CANNOT PLAY” flashes on the display. / Check whether the connected USB device is compatible with this  
“NO USB” appears on the display. / The unit. / Reattach the USB device again.  
unit cannot detect the USB device.  
While playing a track, sound is  
sometimes interrupted.  
The tracks have not been properly copied into the USB device. Copy  
tracks again into the USB device, and try again.  
The iPod does not turn on or does not  
work.  
Check the connecting cable and its connection. / Update the  
firmware version of the iPod/iPhone. / Charge the battery of  
the iPod/iPhone. / Reset the iPod/iPhone. / Check whether  
<IPOD SWITCH> setting is appropriate. (page 15)  
The sound is distorted.  
Noise is generated.  
Deactivate the equalizer either on this unit or the iPod/iPhone.  
Turn off (uncheck) the “VoiceOver” feature of the iPod. For details,  
visit <http://www.apple.com>.  
Playback stops.  
The headphones are disconnected during playback. Restart the  
playback operation. (page 11)  
“NO FILE” appears on the display.  
Check whether the device contains playable files.  
“CANNOT PLAY” flashes on the display. Check whether the connected iPod/iPhone is compatible with this  
unit. (page 12)  
Additional information  
• This unit can play back multi-session discs; however,  
unclosed sessions will be skipped while playing.  
• This unit can play back files with the extension code  
<.mp3> or <.wma> (regardless of the letter  
case—upper/lower).  
• This unit can play back the files meeting the conditions  
below:  
– Bit rate: MP3/WMA: 8 kbps — 320 kbps  
– Sampling frequency:  
MP3: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,  
16 kHz, 12 kHz, 11.025 kHz, 8 kHz  
WMA: 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz  
• This unit can show WMA Tag and ID3 Tag Version  
1.0/1.1/2.2/2.3/2.4 (for MP3).  
• The search function works but search speed is not  
constant.  
• This unit can play back files recorded in VBR (variable  
bit rate). (Files recorded in VBR have a discrepancy in  
elapsed time indication.)  
• The maximum number of characters for file/folder  
names vary depending on the disc format used (includes  
4 extension characters—<.mp3> or <.wma>).  
ISO 9660 Level 1 and 2, Romeo: 64 characters, Joliet:  
32 characters, Windows long file name: 64 characters  
• This unit cannot play back the following files:  
– MP3 files: encoded in MP3i and MP3 PRO format; an  
inappropriate format; layer 1/2.  
– WMA files: encoded in lossless, professional, and  
voice format; not based upon Windows Media®  
Audio; copy-protected with DRM.  
– Files which have data such as AIFF, ATRAC3, etc.  
ENGLISH  
17  
EN02-19_KD-R521_003A_f.indd 17  
10/14/10 10:06:24 AM  
Using Bluetooth® devices  
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (not supplied)  
to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (page 9)  
• For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth  
device.  
• Operations may be different according to the connected device.  
Preparation  
1 Register (pair) a Bluetooth device with KS-BTA100.  
Refer to the instructions manual supplied with KS-BTA100.  
2 Change the <SRC SELECT> settings of this unit.  
]
<SRC SELECT>  
]
<R-AUX>  
]
[Hold]  
<BT ADAPTER>  
Using the Bluetooth mobile phone  
Adjusting the microphone volume  
Volume level: High/ Normal (initial)/ Low  
(Low)  
(High)  
• Receiving a call  
When a call comes in...  
• Making a call  
KS-BTA100  
Making a call to the last connected number from  
your phone.  
• Switching between handsfree and phone  
While talking...  
Microphone  
• Ends/rejects call  
• Voice dialing  
Voice dialing is available only when the connected  
mobile phone has the voice recognition system.  
[Hold]  
Using the Bluetooth audio device  
1
2
]
“BT AUDIO”  
(CD receiver)  
If playback does not start, operate the Bluetooth audio player to start playback.  
[Press] Selects track.  
[Hold] Fast-forwards or reverses the track.  
About microphone volume:  
• When you turn off the power of the CD receiver, the volume level changes to Normal.  
18  
ENGLISH  
EN02-19_KD-R521_003A_f.indd 18  
10/13/10 12:45:36 PM  
Specifications  
Maximum Power Output :  
Front/Rear : 50 W per channel  
Continuous Power Output (RMS) :  
Front/Rear : 20 W per channel into 4 Ω,  
40 Hz to 20 000 Hz at no more than 1% total  
harmonic distortion.  
AUDIO AMPLIFIER SECTION  
USB SECTION  
USB Standard : USB 1.1, USB 2.0  
Data Transfer Rate (Full Speed) : Max. 12 Mbps  
Compatible Device : Mass Storage Class  
Compatible File System : FAT 32/16/12  
Playable Audio Format : MP3/WMA  
Max. Current : DC 5 V  
500 mA  
Load Impedance : 4 Ω (4 Ω to 8 Ω allowance)  
Frequency Response : 40 Hz to 20 000 Hz  
Signal-to-Noise Ratio : 70 dB  
Line-Out or Subwoofer-Out Level/Impedance  
(for KD-R521/KD-R422/KD-R421) :  
2.5 V/20 kΩ load (full scale)  
GENERAL  
Power Requirement : Operating Voltage :  
DC 14.4 V (11 V to 16 V allowance)  
Grounding System : Negative ground  
Allowable Operating Temperature :  
0°C to +40°C  
Output Impedance : ≤ 600 Ω  
Other Terminal : USB input terminal, Front  
auxiliary input jack, Rear auxiliary/Bluetooth  
adapter input jack, Aerial input  
Dimensions (W × H × D) : (approx.)  
–Installation Size :  
182 mm × 52 mm × 159 mm  
–Panel Size :  
TUNER SECTION  
Frequency Range :  
188 mm × 59 mm × 9 mm  
Mass : 1.2 kg (excluding accessories)  
FM : 87.5 MHz to 108.0 MHz  
AM : MW : 531 kHz to 1 611 kHz  
LW : 153 kHz to 279 kHz  
FM Tuner :  
Usable Sensitivity : 9.3 dBf (0.8 μV/75 Ω)  
50 dB Quieting Sensitivity : 16.3 dBf  
(1.8 μV/75 Ω)  
Alternate Channel Selectivity (400 kHz) :  
65 dB  
Frequency Response : 40 Hz to 15 000 Hz  
Stereo Separation: 40 dB  
MW Tuner :  
Subject to change without notice.  
Microsoft and Windows Media are either  
registered trademarks or trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
KD-R521:  
• “Made for iPod,” and “Made for iPhone”  
mean that an electronic accessory has  
been designed to connect specifically  
to iPod, or iPhone, respectively, and has  
been certified by the developer to meet  
Apple performance standards. Apple is not  
responsible for the operation of this device  
or its compliance with safety and regulatory  
standards. Please note that the use of this  
accessory with iPod, or iPhone may affect  
wireless performance.  
Sensitivity/Selectivity : 20 μV/40 dB  
LW Tuner :  
Sensitivity : 50 μV  
CD PLAYER SECTION  
Type : Compact disc player  
Signal Detection System : Non-contact optical  
pickup (semiconductor laser)  
Number of Channels : 2 channels (stereo)  
Frequency Response : 5 Hz to 20 000 Hz  
Signal-to-Noise Ratio : 98 dB  
Wow and Flutter : Less than measurable limit  
MP3 Decoding Format (MPEG1/2 Audio  
Layer 3) : Max. Bit Rate: 320 kbps  
• iPhone, iPod, iPod classic, iPod nano, and  
iPod touch are trademarks of Apple Inc.,  
registered in the U.S. and other countries.  
WMA (Windows Media® Audio) Decoding  
Format : Max. Bit Rate: 192 kbps  
ENGLISH  
19  
EN02-19_KD-R521_003A_f.indd 19  
10/13/10 4:44:06 PM  
Merci pour avoir acheté un produit JVC.  
Veuillez lire attentivement toutes les instructions avant d’utiliser l’appareil afin de bien comprendre  
son fonctionnement et d’obtenir les meilleures performances possibles.  
IMPORTANT POUR PRODUITS LASER  
1.PRODUIT LASER CLASSE 1  
2.ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a aucune pièce réparable par l’utilisateur à  
l’intérieur de l’appareil; confiez toute réparation à un personnel qualifié.  
3.ATTENTION: Rayonnement laser visible et/ou invisible de classe 1M une fois ouvert. Ne pas  
regarder directement avec des instruments optiques.  
4.REPRODUCTION DE L’ÉTIQUETTE: ÉTIQUETTE DE PRÉCAUTION PLACÉE À L’EXTÉRIEUR DE L’APPAREIL.  
AVERTISSEMENT:  
Arrêtez la voiture avant de manipuler l’appareil.  
Attention:  
Pile  
Ajustez le volume de façon à pouvoir entendre  
les sons extérieurs à la voiture. Conduire avec  
le volume trop haut peut être la cause d’un  
accident.  
Produits  
Informations relatives à l’élimination  
des appareils et des piles usagés, à  
l’intention des utilisateurs  
[Union européenne seulement]  
Ces symboles signifient que le produit et les  
piles ne doivent pas être éliminés en tant  
que déchet ménager à la fin de son cycle  
de vie.  
Si vous souhaitez éliminer ce produit et les  
piles, faites-le conformément à la législation  
nationale ou autres règles en vigueur dans  
votre pays et votre municipalité.  
En éliminant correctement ce produit, vous  
contribuez à la conservation des ressources  
naturelles et à la prévention des éventuels  
effets négatifs sur l’environnement et la  
santé humaine.  
Précautions sur le réglage du volume:  
Les appareils numériques (CD/USB) produisent  
très peut de bruit par rapport aux autres  
sources. Réduisez le volume avant de  
reproduire ces sources numériques afin d’éviter  
d’endommager les enceintes par la soudaine  
augmentation du niveau de sortie.  
Précautions pour la lecture de disques à  
double face:  
La face non DVD d’un disque à “DualDisc” n’est  
pas compatible avec le standard “Compact Disc  
Digital Audio”. Par conséquent, l’utilisation de la  
face non DVD d’un disque à double face sur cet  
appareil n’est pas recommandée.  
Condensation : Quand une voiture est  
climatisée, de la condensation peut se  
produire sur la lentille du laser. Cela peut être  
la cause d’une erreur de lecture du disque.  
Dans ce cas, retirez le disque et attendez que  
l’humidité s’évapore.  
Température à l’intérieur de la voiture :  
Si votre voiture est restée garée pendant  
longtemps dans un climat chaud ou froid,  
attendez que la température à l’intérieur de  
la voiture redevienne normale avant d’utiliser  
l’appareil.  
Notification:  
La marque Pb en dessous du symbole des  
piles indique que cette pile contient du  
plomb.  
JVC ne peut être tenu responsable pour toute  
perte de données dans un iPod/iPhone et/  
ou un périphérique USB à mémoire de grande  
capacité lors de l’utilisation de ce système.  
2
FRANÇAIS  
FR02-19_KD-R521[E_EU]1.indd  
2
9/24/10 10:00:33 AM  
Comment attacher/détacher le  
panneau de commande  
TABLE DES MATIERES  
3
Comment attacher/détacher le  
panneau de commande  
3
3
3
Comment réinitialiser votre appareil  
Comment forcer l’éjection d’un disque  
Entretien  
3
4
À propos des disques  
Annulation des démonstrations des  
affichages  
Réglage de l’horloge  
Opérations de base  
Écoute de la radio  
Écoute d’un disque  
Connexion d’autres appareils  
extérieurs  
Comment réinitialiser votre appareil  
Vos ajustements préréglés  
sont aussi effacés.  
4
5
6
8
9
Comment forcer l’éjection d’un  
disque  
[Maintenez pressée]  
9
Écoute d’un autre appareil extérieur  
10 Écoute d’un périphérique USB  
• Faites attention de ne pas faire tomber le  
disque quand il est éjecté.  
11 Écoute d’un iPod/iPhone  
(Disponible pour le KD-R521)  
• Si cela ne fonctionne pas, essayez de  
réinitialiser l’autoradio.  
12 Sélection d’un mode sonore préréglé  
13 Utilisation des menus  
Entretien  
15 Utilisation de la télécommande  
Nettoyage de l’appareil  
Essuyez la saleté sur le panneau avec un chiffon  
sec au silicone ou un chiffon doux. Ne pas  
respecter ces précautions peut entraîner des  
dommages à l'appareil.  
(Pour le KD-R521/KD-R422/KD-R421: vendu en option)  
16 Guide de dépannage  
18 Utilisation de périphériques  
Bluetooth®  
Nettoyage du connecteur  
Essuyez toute les saletés sur le connecteur de  
l’appareil et le panneau. Utilisez une coton-tige  
ou un chiffon.  
19 Spécifications  
À propos des disques  
Cet appareil ne peut lire que les CD comportant:  
Manipulation des disques:  
• Ne pas toucher la surface d’enregistrement du  
disque.  
• Ne pas coller de ruban adhésif, etc. sur les disques  
et ne pas utiliser de disque avec du ruban adhésif  
collé dessus.  
• N’utilisez aucun accessoire pour le disque.  
• Nettoyez le disque en partant du centre vers  
l’extérieur.  
• Nettoyez le disque avec un chiffon sec au silicone  
ou un chiffon doux. N’utilisez aucun solvant.  
• Pour retirer les disques de cet appareil, tirez-les  
horizontalement.  
• Retirez les ébarbures du bord du trou central du  
disque avant d’insérer un disque.  
Disques qui ne peuvent pas être utilisés:  
• Disques qui ne sont pas ronds  
• Disques avec des colorations sur la surface  
d’enregistrement ou disques sales  
• Vous ne pouvez pas reproduire un disque  
enregistrable/réinscriptible qui n’a pas été finalisé.  
(Pour le processus de finalisation, reportez-vous  
au logiciel utilisé pour graver le disque et au  
mode d’emploi du graveur de disque.)  
• Les CD de 3 pouces ne peuvent pas être  
utilisés. Essayer d’insérer un disque à l’aide d’un  
adaptateur peut entraîner un dysfonctionnement  
de l’appareil.  
FRANÇAIS  
3
FR02-19_KD-R521[E_EU]1.indd  
3
10/8/10 4:00:31 PM  

Black Box RS IC107C R3 IC107C R3 User Manual
Bryan Boilers DR250 User Manual
Fusion Electronics Car Speaker PF SW120D4 User Manual
GE PROFILE ADVANTIUM SCB2001K User Manual
Hypertec N7048PHY User Manual
Jensen PowerPlus 693 User Manual
JVC 0305MNMMDWJEIN User Manual
JVC GET0661 002A User Manual
JVC GR DVL865 User Manual
JVC GR FX120A User Manual