JVC Car Speaker KD DV7405 User Manual

Интернет-магазин  
DVD/CD RECEIVER  
KD-DV7406/KD-DV7405  
For canceling the display demonstration, see page 7.  
For installation and connections, refer to the separate manual.  
INSTRUCTIONS  
GET0532-005A  
[A]  
Thank you for purchasing a JVC product.  
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best  
possible performance from the unit.  
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to  
qualified service personnel.  
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical  
instruments.  
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.  
For safety...  
• Do not raise the volume level too much, as this will  
block outside sounds, making driving dangerous.  
[European Union only]  
• Stop the car before performing any complicated  
operations.  
Temperature inside the car...  
Caution:  
If you have parked the car for a long time in hot or cold  
weather, wait until the temperature in the car becomes  
normal before operating the unit.  
If the temperature inside the car is below 0°C, the  
movement of animation and text scroll will be halted  
on the display to prevent the display from being  
blurred.  
appears on the display.  
When the temperature increases, and the operating  
temperature is resumed, these functions will start  
working again.  
2
WARNINGS:  
(To prevent accidents and damage)  
How to reset your unit  
• DO NOT install any unit or wire any cable in  
a location where;  
– it may obstruct the steering wheel and  
gearshift lever operations.  
– it may obstruct the operation of safety  
devices such as air bags.  
– it may obstruct visibility.  
Your preset adjustments will also be erased (except the  
• DO NOT operate the unit while driving.  
• If you need to operate the unit while  
driving, be sure to look around carefully.  
• The driver must not watch the monitor  
while driving.  
registered Bluetooth device, see pages 26 and 27).  
How to forcibly eject a disc  
If the parking brake is not engaged,  
“DRIVER MUST NOT WATCH THE MONITOR  
WHILE DRIVING.” appears on the monitor,  
and no playback picture will be shown.  
– This warning appears only when the  
parking brake lead is connected to the  
parking brake system built in the car  
(refer to the Installation/Connection  
Manual).  
“Please Eject” appears on the display.  
Be careful not to drop the disc when it ejects.  
If this does not work, reset your unit.  
Caution on volume setting:  
Digital devices (CD/USB) produce very little noise  
compared with other sources. Lower the volume before  
playing these digital sources to avoid damaging the  
speakers by sudden increase of the output level.  
Caution for DualDisc playback  
The Non-DVD side of a “DualDisc” does not comply with  
the “Compact Disc Digital Audio” standard. Therefore,  
the use of Non-DVD side of a DualDisc on this product  
may not be recommended.  
3
How to use the M MODE and SEL  
buttons  
Detaching the control panel  
If you use M MODE or SEL (select), the display and some  
controls (such as the number buttons,  
4
/¢ buttons, 5/buttons, and the  
control dial) enter the corresponding control mode.  
Ex.: When you press number button 1 after pressing  
M MODE, to operate the FM tuner.  
Avoid touching the connectors.  
Attaching the control panel  
To use these controls for original functions, press  
M MODE again.  
• However, pressing SEL makes the unit enters a  
different mode.  
• Waiting for about 15 seconds (or 30 seconds for  
Bluetooth sources) without pressing any of these  
buttons will automatically cancels the control.  
Opening and closing the control  
panel  
Indication language:  
In this manual, English indications are used  
for purposes of explanation. You can select  
the indication language on the monitor on the  
“LANGUAGE” setting (see page 45).  
Open...  
Close...  
4
CONTENTS  
INTRODUCTIONS  
Playable disc type ...........................................................................................................................  
Preparation.....................................................................................................................................  
6
7
OPERATIONS  
Basic operations..............................................................................................................................  
• Using the control panel............................................................................................................................  
• Using the remote controller (RM-RK252).................................................................................................  
8
8
9
Listening to the radio...................................................................................................................... 12  
Disc operations................................................................................................................................ 14  
• Operations using the control panel.......................................................................................................... 15  
• Operations using the remote controller (RM-RK252)............................................................................... 18  
Listening to the USB device............................................................................................................. 24  
Dual Zone operations ...................................................................................................................... 25  
EXTERNAL DEVICES  
Listening to the Bluetooth® devices................................................................................................ 26  
• Using the Bluetooth cellular phone ......................................................................................................... 28  
• Using the Bluetooth audio player ............................................................................................................ 30  
Listening to the CD changer ............................................................................................................ 31  
Listening to the iPod....................................................................................................................... 32  
Listening to the other external components ................................................................................... 36  
SETTINGS  
Selecting a preset sound mode ....................................................................................................... 38  
General settings — PSM ................................................................................................................ 40  
Disc setup menu.............................................................................................................................. 45  
Bluetooth settings .......................................................................................................................... 47  
Title assignment ............................................................................................................................. 48  
REFERENCES  
Maintenance................................................................................................................................... 49  
More about this unit ....................................................................................................................... 50  
Troubleshooting.............................................................................................................................. 58  
Specifications.................................................................................................................................. 62  
5
Playable disc type  
Disc type  
DVD  
Recording format, file type, etc  
DVD Video (Region Code: 4) *1  
Playable  
DVD Audio  
DVD-ROM  
DVD Recordable/Rewritable  
(DVD-R/-RW *2, +R/+RW *3)  
• DVD Video: UDF bridge  
• DVD-VR  
• DivX/MPEG-1/MPEG-2/MP3/  
WMA/WAV: ISO 9660 level 1,  
level 2, Romeo, Joliet  
DVD Video  
DVD-VR  
DivX/MPEG1/MPEG2  
MP3/WMA/WAV  
AAC  
JPEG/MPEG4  
DVD+VR  
DVD-RAM  
Dual Disc  
CD/VCD  
DVD side  
Non-DVD side  
Audio CD/CD Text (CD-DA)/DTS-CD *4  
VCD (Video CD)  
SVCD (Super Video CD)  
CD-ROM  
CD-I (CD-I Ready)  
CD-DA  
CD Recordable/Rewritable  
(CD-R/-RW)  
• ISO 9660 level 1, level 2, Romeo,  
Joliet  
DivX/MPEG1/MPEG2  
MP3/WMA/WAV  
AAC  
JPEG/MPEG4  
1
*
*
If you insert a DVD Video disc of an incorrect Region Code, “REGION CODE ERROR” appears on the monitor.  
DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer discs are not  
playable.  
It is possible to play back finalized +R/+RW (Video format only) discs. +RW double layer discs are not playable.  
To reproduce DTS sound, use the DIGITAL OUT terminal (see also pages 46 and 56).  
2
3
4
*
*
6
Preparation  
Cancel the display demonstration and set the clock  
• See also pages 40 and 41.  
Turn on the power.  
1
2
Enter the PSM settings.  
Cancel the display demonstrations  
Select “Demo,” then “Off.”  
3
Set the clock  
Select “Clock Hr” (hour), then adjust the hour.  
Select “Clock Min” (minute), then adjust the minute.  
Select “24H/12H,” then “24Hours” or “12Hours.”  
Finish the procedure.  
4
Changing the display information and pattern  
When the power is turned off: Check the current clock time  
Ex.: When tuner is selected as the source  
Source operation display  
Audio level meter display  
• If a station has been assigned a title, station  
title appears after about 5 seconds.  
(see “LevelMeter” on page 40)  
• To assign a title to a station, see page 48.  
INTRODUCTIONS  
7
Basic operations  
Using the control panel  
1
TUNER: Select preset station.  
DISC/USB/CD-CH: Select title/program/  
playlist/folder.  
USB-iPod: Enter the main menu [Hold].  
iPod: Enter the main menu/Pause playback/  
Confirm selection.  
9
• Volume control [Turn].  
• Select the source [Press]*1.  
TUNER = DISC*2 = USB*2 (or USB-iPod)*2  
= CD-CH*2/iPod*2 (or EXT IN) =  
BT-PHONE*2 = BT-AUDIO*2 = LINE IN =  
AV IN = (back to the beginning)  
BT-PHONE/BT-AUDIO: Select a registered  
device.  
• Turn on the power.  
p
q
• Select/adjust the sound mode.  
• Enter the PSM settings [Hold].  
TUNER: Select preset station.  
2
• Turn off the power [Hold].  
• Attenuate the sound (if the power is on).  
Display window  
USB (Universal Serial Bus) input jack  
Select the sound mode  
Flip down the control panel.  
• To eject the disc, flip down the control panel  
then press 0 on the unit.  
DISC/USB/CD-CH: Select chapter/title/  
program/folder/track/disc (for CD changer).  
BT-PHONE: Dial preset phone number*3.  
• Enter functions mode.  
BT-PHONE: Activate Voice Dialing [Hold].  
Change the display information and pattern.  
TUNER: Select the bands.  
3
4
5
6
w
e
r
DISC/USB/USB-iPod: Start/pause playback.  
BT-AUDIO: Start/pause playback.  
7
8
AV-IN (video) input jack  
TUNER: Search for station.  
DISC/USB/USB-iPod/CD-CH/iPod: Select  
chapter/track.  
1
*
Holding SOURCE will enter the Bluetooth menu if a  
Bluetooth phone is connected.  
You cannot select these sources if they are not ready  
or not connected.  
BT-AUDIO: Reverse skip/forward skip.  
2
*
3
*
For storing preset phone number, see page 30.  
8
Using the remote controller (RM-RK252)  
Installing the battery  
R03/LR03/AAA  
Insert the batteries into the remote controller by  
matching the polarity (+ and –) correctly.  
Caution:  
Battery shall not be exposed to excessive heat such as  
sunshine, fire, or the like.  
If the effectiveness of the remote controller  
decreases, replace both batteries.  
Before using the remote controller:  
• Aim the remote controller directly at the remote  
sensor on the unit.  
• DO NOT expose the remote sensor to bright light  
(direct sunlight or artificial lighting).  
IMPORTANT:  
If Dual Zone is activated (see page 25), the remote  
controller only functions for operating the DVD/CD  
player.  
Remote sensor  
1*1  
button  
• Turns the power on if pressed briefly or  
attenuates the sound when the power is on.  
• Turns the power off if pressed and held.  
Continued on the next page  
OPERATIONS  
9
2
5/buttons  
3
VOL (volume) + / – buttons  
TUNER: Selects the preset stations.  
DISC:  
– DVD-Video: Selects the title.  
– DVD-VR: Selects the program/playlist.  
– DivX/MPEG Video/MP3/WMA/WAV: Selects  
the folders if included.  
• Adjusts the volume level.  
2nd VOL (volume) buttons  
• Adjust the volume level through the 2nd AUDIO  
OUT plug when pressed with SHIFT button (see  
page 25).  
USB:  
4* 2 ASPECT button  
• Not applicable for this unit.  
– DivX/MPEG Video/MP3/WMA/WAV: Selects  
the folders if included.  
CD-CH: Selects the folders if included.  
IPOD:  
5:Enters the main menu (then 5/ /  
5*1 PHONE button  
• Answer incoming calls.  
• Enters “Redial” menu when a Bluetooth phone  
is connected [Hold].  
4
/ ¢ work as menu  
selecting buttons.)  
5: Returns to the previous menu.  
: Confirms the selection.  
:Pauses or resumes playback.  
6* 2 SETUP button  
• Enters disc setup menu (during stop).  
4
/ ¢ buttons  
7* 2 TOP M (menu) button  
TUNER:  
• DVD-Video/DivX: Shows the disc menu.  
• DVD-VR: Shows the Original Program screen.  
• VCD: Resumes PBC playback.  
– Searches for stations automatically if pressed  
briefly.  
– Searches for stations manually if pressed and  
held.  
USB-iPod: Enters the search mode menu (see  
page 34).  
DISC/USB/USB-iPod/CD-CH:  
– Reverse skip/forward skip if pressed briefly.  
– Reverse search/forward search if pressed and  
held.  
8* 2 OSD (on-screen display) button  
• Shows the on-screen bar.  
BT-AUDIO: Reverse skip/forward skip if pressed  
briefly.  
IPOD:  
– Reverse skip/forward skip if pressed briefly.  
– Reverse search/forward search if pressed and  
held.  
9
p
q
SHIFT button  
• Functions with other buttons.  
DISP (display) button  
• Changes the display information.  
In menu selecting mode:  
1/ ¡ buttons  
– Selects an item if pressed briefly. (Then, press  
to confirm the selection.)  
– Skips 10 items at a time if pressed and held.  
• DVD-Video: Slow motion playback (during  
pause).  
• DVD-VR/VCD: Forward slow motion playback  
(during pause).  
DISC/USB/USB-iPod: Reverse search/forward  
search.  
w*1 SOURCE button  
• Selects the source.  
10  
e
r
3 (play) / 8 (pause) button  
DISC/USB/USB-iPod/BT-AUDIO: Starts/pauses  
playback.  
DIRECT button  
DISC/USB: Enters direct search mode for  
chapter/title/program/playlist/folder/track  
when pressed with SHIFT button (see page 18  
for details).  
(end call) button  
• Ends the call.  
CLR (clear) button  
BAND/ 7 (stop) buttons  
TUNER: Selects the bands.  
DISC/USB/USB-iPod/BT-AUDIO: Stops  
playback.  
DISC/USB: Erases the misentry when pressed  
with SHIFT button.  
1
2
*
When Dual Zone is activated, these buttons cannot be  
used.  
Functions as number buttons/* (asterisk)/# (hash)  
when pressed with SHIFT button.  
TUNER: Selects the preset stations (1 – 6).  
DISC: Enters chapter/title/program/playlist/folder/  
t* 2 RETURN button  
• VCD: Returns to the PBC menu.  
USB-iPod: Returns to Control Screen.  
*
y* 2 MENU button  
• DVD-Video/DivX: Shows the disc menu.  
• DVD-VR: Shows the Playlist screen.  
• VCD: Resumes PBC playback.  
USB-iPod: Enters the search mode menu (see  
page 34).  
track number after entering search mode by  
pressing SHIFT and DIRECT (see page 18 for details).  
u* 2 %/ buttons  
• DVD-Video: Makes selection/settings.  
CD-CH: Changes discs in the magazine.  
@/ # buttons  
• DVD-Video: Makes selection/settings.  
• DivX/MPEG Video: Skips back or forward by  
about five minutes.  
ENT (enter) button  
• Confirms selection.  
i* 2 DUAL button  
• Activates or deactivates Dual Zone.  
o
SURROUND button  
• Not applicable for this unit.  
OPERATIONS  
11  
Listening to the radio  
Select “TUNER.”  
1
Select the bands.  
2
Search for a station to listen—Auto Search.  
Manual Search: Hold either one of the buttons until “M” lights up on the display, then  
press it repeatedly.  
3
• When receiving an FM stereo broadcast with sufficient signal strength,  
on the display.  
lights up  
When an FM stereo broadcast is  
hard to receive  
FM station automatic presetting  
—SSM (Strong-station Sequential  
Memory)  
1
2
You can preset up to six stations for each band.  
1
2
3
While listening to a station...  
Reception improves, but stereo effect will be lost.  
lights up on the display.  
3
Exit from the setting.  
Local FM stations with the strongest signals are  
searched and stored automatically in the selected  
FM band.  
12  
Manual presetting  
Ex.: Storing FM station of 92.5 MHz into preset number  
4 of the FM1 band.  
Using the number buttons  
4
5
Select the preset number you want to store  
into.  
1
2
• You can move to the lists of the other FM bands  
by pressing number button 5 (  
6 ( ) repeatedly.  
) or  
Store the station.  
3
Preset number flashes for a while.  
Listening to the preset station on  
the Preset Station List  
Using the Preset Station list  
• When  
is shown on the display, you can  
1
2
Display the Preset Station List, then select  
the preset station you want to listen to.  
move back to the previous screen by pressing number  
button 3.  
1
Follow steps 1 and 2 of “Using the number  
buttons” above.  
Change to the selected station.  
• By holding 5 / , the Preset Station List will  
also appear (go to step 4).  
2
3
Display the Preset Station List.  
OPERATIONS  
13  
Disc operations  
Before performing any operations...  
Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other  
discs by referring to the monitor screen. (See pages 20 – 23.)  
The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its  
internal program).  
If the current disc does not have any disc menu, all tracks will be played repeatedly until you change the source or  
eject the disc.  
If “ ” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to  
do.  
• In some cases, without showing “ ,” operations will not be accepted.  
Open the control panel.  
1
Make sure to detach the USB device before opening the control  
panel, as it might block the opening mechanism.  
• To detach the USB device, see page 24.  
Insert the disc.  
Playback starts automatically.  
2
Start playback if necessary.  
3
To stop play and eject the disc  
Prohibiting disc ejection  
• Press SOURCE to listen to another playback source.  
To cancel the prohibition, repeat the same  
procedure.  
14  
Operations using the control panel  
Pressing (or holding) the following buttons allows you to...  
Disc type  
(Number buttons)*3  
[Press] Select chapter  
[Hold] Reverse/fast-forward  
chapter*1  
Select title  
During stop: Locate title  
During play/pause: Locate  
chapter  
[Press] Select chapter  
[Hold] Reverse/fast-forward  
chapter*1  
Select program number/ During stop: Locate program  
playlist number  
During play/pause: Locate  
chapter  
[Press] Select track  
[Hold] Reverse/fast-forward track*2  
Select folder  
Locate particular folder directly  
[Press] Select track  
[Hold] Reverse/fast-forward track*1  
Locate particular track directly  
(PBC not in use)  
[Press] Select track  
[Hold] Reverse/fast-forward track*1  
Select folder  
Locate particular folder directly  
[Press] Select track  
[Hold] Reverse/fast-forward track*1  
Locate particular track directly  
1
2
3
*
*
*
Search speed:  
Search speed:  
Press to select number 1 to 6; hold to select number 7 to 12.  
Continued on the next page  
OPERATIONS  
15  
After pressing M MODE, press the following buttons to...  
Disc type  
Skip 10 chapters (during  
play or pause)  
Repeat Chapter:  
Repeat current chapter  
Repeat Title:  
Repeat current title  
Skip 10 chapters (during  
play or pause)  
Repeat Chapter:  
Repeat current chapter  
Repeat Program:  
Repeat current program (not  
available for Playlist Playback)  
Skip 10 tracks (within the  
same folder)  
Repeat Track:  
Repeat current track  
Repeat Folder:  
Random Folder:  
Randomly play all tracks of  
current folder, then tracks of  
next folders  
Repeat current folder  
Random All:  
Randomly play all tracks  
Skip 10 tracks (PBC not in  
use)  
Repeat Track:  
Random All:  
Repeat current track (PBC not in Randomly play all tracks (PBC  
use)  
not in use)  
Skip 10 tracks (within the  
same folder)  
Repeat Track:  
Repeat current track  
Repeat Folder:  
Random Folder:  
Randomly play all tracks of  
current folder, then tracks of  
next folders  
Repeat current folder  
Random All:  
Randomly play all tracks  
Skip 10 tracks  
Repeat Track:  
Random All:  
Repeat current track  
Randomly play all tracks  
• You can also cancel the playback mode by selecting “Off” or press number button 4 (  
).  
16  
Selecting a folder/track on the list  
(only for MP3/WMA/WAV file)  
5
Change to the selected item.  
A
If File List is selected  
The list disappears and playback  
• When  
is shown on the display, you can  
move back to the previous screen by pressing number  
button 3.  
starts.  
1
B
If Folder List is selected  
2
Select “LIST.”  
• If the current folder is selected, File List  
appears, then repeat steps 4 and 5 A to  
start playback.  
3
Select the list type.  
• If another folder is selected, playback starts  
from the 1st file of the selected folder.  
4
Select an item.  
Ex.: When “File” is selected in step 3  
• You can move to the other lists by pressing  
number button 5 (  
repeatedly.  
) or 6 (  
)
OPERATIONS  
17  
Operations using the remote controller (RM-RK252)  
Disc  
/
Button  
Stop play  
Stop play  
Start play/Pause (if pressed during play)  
Start play/Pause (if pressed during play)  
• Reverse/forward chapter search*1 (No  
sound can be heard.)  
• Slow motion*2 during pause (No sound can  
be heard.)  
Reverse/forward track search*4 (No sound can  
be heard.)  
* DVD-VR: Reverse slow motion does not work.  
[Press] Select chapter (during play or pause)  
[Press] Select track (during play or pause)  
[Hold] Reverse/fast-forward chapter search*3 [Hold] Reverse/fast-forward track search*5  
(No sound can be heard.)  
• DVD-Video: Select title (during play or  
pause)  
Select folder  
• DVD-VR: Select program/playlist (during  
play or pause)  
• Skip back or forward the scenes by about  
five minutes  
• Select chapter  
To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/VCD/  
MP3/WMA/WAV/CD)  
1
While holding SHIFT, press DIRECT repeatedly to select the desired search mode.  
DVD-Video  
DVD-VR  
:
:
VCD :  
CD  
:
DivX/MPEG Video :  
MP3/WMA/WAV  
:
2
3
While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.  
Press ENT (enter) to confirm.  
18  
Stop play  
Stop play  
Stop play  
Start play/Pause (if pressed during Start play/Pause (if pressed during Start play/Pause (if pressed during  
play)  
play)  
play)  
Reverse/forward track search*1  
• Forward slow motion*2 during  
pause. (No sound can be heard.)  
* Reverse slow motion does not work.  
Reverse/forward track search*1  
Reverse/forward track search*1  
[Press] Select track (during play or [Press] Select track (during play or [Press] Select track (during play or  
pause) pause) pause)  
[Hold] Reverse/fast-forward track [Hold] Reverse/fast-forward track [Hold] Reverse/fast-forward track  
search*3 (No sound can be  
search*3  
search*3  
heard.)  
Select folder  
• For DivX/MPEG Video/MP3/WMA/WAV, track is searched within the same folder.  
• To erase a misentry, press CLR (clear) while holding SHIFT.  
• To return to the previous screen, press RETURN.  
1
*
*
*
*
*
Search speed:  
Slow motion speed:  
Search speed:  
Search speed:  
Search speed:  
2
3
4
5
Continued on the next page  
OPERATIONS  
19  
Using menu driven features... (DVD-Video/  
DVD-VR)  
Operations using the  
on-screen bar  
(DVD/DVD-VR/DivX/MPEG Video/VCD)  
These operations are possible on the monitor using the  
remote controller.  
1
2
Press TOP M/MENU to enter the menu screen.  
Press %/ / @* / #* to select an item you want  
to start play.  
3
Press ENT (enter) to confirm.  
1
2
3
Show the on-screen bar (see page 21).  
* Not applicable for DVD-VR.  
(twice)  
Canceling the PBC playback... (VCD)  
Select an item.  
1
2
During stop, press DIRECT while holding SHIFT.  
Hold SHIFT, then press the number buttons (0 – 9)  
to enter the desired number.  
3
Press ENT (enter) to confirm.  
Make a selection.  
If pop-up menu appears...  
• To resume PBC, press TOP M/MENU.  
• To cancel pop-up menu, press RETURN.  
• For entering time/numbers, see the following.  
Entering time/numbers  
Press %/ to change the number, then press @/ # to  
move to the next entry.  
• Each time you press %/ , the number increases/  
decreases by one value.  
• After entering the numbers, press ENT (enter).  
• It is not required to enter the zero and tailing zeros  
(the last two digits in the example below).  
Ex.: Time search  
DVD: _:_ _:_ _ (Ex.: 1:02:00)  
Press % once, then # twice to go to the third entry, %  
twice, then press ENT (enter).  
To remove the on-screen bar  
20  
On-screen bar  
Ex.: DVD-Video  
Information  
Operation  
6
7
Playback status  
Play  
1
2
Disc type  
• DVD-Video/DTS-CD: Audio signal format type  
Forward/reverse search  
Forward/reverse slow-motion  
Pause  
Stop  
and channel  
• VCD:PBC  
Playback mode*1  
DVD-Video:  
DVD-VR:  
3
T. RPT: Title repeat  
Operation icons  
C. RPT: Chapter repeat  
C. RPT: Chapter repeat  
PG. RPT: Program repeat  
Change time indication (see 5)  
Time Search (Enter the elapsed playing  
time of the current title/program/  
playlist or of the disc.)  
DivX/MPEG Video: T. RPT: Track repeat  
F. RPT: Folder repeat  
Title Search (by its number)  
Chapter Search (by its number)  
Track Search (by its number)  
Change the audio language or audio  
channel  
F. RND: Folder random  
A. RND: All random  
T. RPT: Track repeat  
A. RND: All random  
VCD*2:  
4
Playback information  
Current title/chapter  
Change or turn off the subtitle  
language  
Current program/chapter  
Change the view angle  
Current playlist/chapter  
Repeat play*1  
Random play*1  
Current track  
Current folder/track  
Time indication  
1
5
*
For repeat play/random play, see also page 16.  
While PBC is not in use.  
2
Elapsed playing time of the disc  
(For DVD-Video/DVD-VR, elapsed  
playing time of the current title/  
program/playlist.)  
*
3
*
Not applicable for DVD-VR.  
DVD-Video/DVD-VR: Remaining  
title/program/playlist time  
VCD: Remaining disc time  
Elapsed playing time of the current  
chapter/track*3  
Remaining time of the current  
chapter/track*3  
OPERATIONS  
21  
7
8
Track information  
Track list with the current track selected  
Operations using the control  
screen  
(DivX/MPEG Video/MP3/WMA/WAV/CD)  
These operations are possible on the monitor using the  
remote controller.  
To select a playback mode  
1
While control screen is displayed...  
1
Show the control screen.  
DivX/MPEG Video: Press 7 during play.  
MP3/WMA/WAV/CD: Automatically appear during  
play.  
Playback mode selection screen appears on the  
folder list section of the control screen.  
Select a playback mode.  
2
3
2
3
4
Select “Folder” column or “Track” column  
(except for CD).  
Select an item.  
REPEAT:  
Select a folder or track.  
RANDOM:  
Start playback.  
DivX/MPEG Video: Press ENT (enter) or 3/8.  
MP3/WMA/WAV/CD: Playback starts automatically.  
Mode  
Playback functions  
F. RPT  
Repeat current folder  
(folder repeat):  
T. RPT  
(track repeat):  
Repeat current track  
Control screen  
A. RND  
Randomly play all tracks  
(all random):  
F. RND  
Randomly play all tracks of  
(folder random): current folder, then tracks of  
next folders  
4
Confirm the selection.  
Ex.: MP3/WMA/WAV disc  
* Not selectable for CD.  
1
2
3
4
5
6
Current folder number/total folder number  
Folder list with the current folder selected  
Selected playback mode  
Elapsed playing time of the current track  
Operation mode icon ( 3, 7, 8, ¡, 1 )  
Current track number/total number of tracks in the  
current folder (total number of tracks on the disc)  
22  
3
4
Current page/total number of the pages included  
in the list  
Current folder/track (highlighted bar)  
Operations using the list  
screen  
(DVD-VR/DivX/MPEG Video/MP3/WMA/WAV)  
These operations are possible on the monitor using the  
remote controller.  
List screen (DVD-VR)  
You can use ORIGINAL PROGRAM or PLAY LIST screen  
anytime while playing DVD-VR with its data recorded.  
List screen (DivX/MPEG Video/MP3/WMA/  
WAV)  
1
Select a list screen.  
Before playing, you can display the folder list/track list  
to confirm the contents and start playing a track.  
1
Display the folder list while stop.  
2
Select an item from the folder list.  
• Track list of the selected folder appears.  
• To go back to the folder list, press RETURN.  
3
Select a track to start playing.  
or  
1
2
3
Program/playlist number  
Recording date  
Recording source (TV station, the input  
terminal of the recording equipment, etc.)  
Start time of recording  
Title of the program/playlist*  
Current selection (highlighted bar)  
Creating date of playlist  
• MP3/WMA/WAV: Control screen appears (see  
page 22).  
4
5
6
7
8
9
Number of chapters  
Playback time  
* The title of the original program or playlist may  
not be displayed depending on the recording  
equipment.  
Ex.: Folder list  
2
Select an item from the list.  
1
2
Current folder number/total folder number  
Current track number/total number of tracks in the  
current folder  
OPERATIONS  
23  
Listening to the USB device  
You can connect a USB mass storage class device such as a USB memory, portable HDD, etc. to the unit.  
• You can also connect an Apple iPod to the USB input jack. For details of the operations, see pages 32 – 36.  
This unit can play DivX/MPEG Video/MP3/WMA/WAV tracks stored in a USB device.  
All tracks will be played repeatedly until you change the source or detach the USB device.  
USB input jack  
1
2
USB memory  
Turn on the monitor to watch the playback picture if  
you play back a DivX/MPEG file. You can also control  
playback by referring to the monitor screen. (See also  
pages 20 – 23.)  
You can operate the USB device in the same way you  
operate the files on a disc. (See pages 15 – 23.)  
• You cannot select “USB” when Dual Zone is in use  
(see page 25).  
• See pages 18 – 23 for operation using the remote  
controller.  
• See pages 45 and 46 for more settings.  
Cautions:  
• Avoid using the USB device if it might hinder your  
safety driving.  
• Do not pull out and attach the USB device repeatedly  
while “Reading” is shown on the display.  
• Do not start the car engine if a USB device is  
connected.  
• This unit may not be able to play the files depending  
on the type of USB device.  
• Operation and power supply may not work as  
intended for some USB devices.  
If “ ” appears on the monitor when pressing a  
button, the unit cannot accept the operation you  
have tried to do.  
• In some cases, without showing “ ,” operations  
will not be accepted.  
If a USB device has been attached...  
Playback starts from where it has  
been stopped previously.  
• You cannot connect a computer to the USB input  
terminal of the unit.  
• Make sure all important data has been backed up to  
avoid losing the data.  
• If a different USB device is  
currently attached, playback starts  
from the beginning.  
• Do not leave a USB device in the car, expose to direct  
sunlight, or high temperature to avoid deformation  
or cause damages to the device.  
To stop play and detach the USB device  
Straightly pull it out from the unit.  
• Press SOURCE to listen to another playback source.  
• Some USB devices may not work immediately after  
you turn on the power.  
• For more details about USB operations, see pages 51  
and 52.  
24  
Dual Zone operations  
You can enjoy disc playback on the external monitor connected to the VIDEO output terminal and 2nd AUDIO OUT  
plugs while listening to any source (other than “AM” and “USB”) through the speakers.  
• You cannot select “AM” or “USB” as the source when Dual Zone is activated.  
• When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. For operations, see  
pages 18 – 23.  
These operations are possible on the monitor using the remote controller.  
Activate Dual Zone.  
• DUAL indicator lights up on the display.  
1
The main source automatically changes to “DISC.”  
To select a different source (main source) to listen through the speakers,  
press SOURCE on the control panel.  
• By using the buttons on the control panel, you can operate the newly  
selected source without affecting Dual Zone operations.  
Adjust the volume through the 2nd AUDIO OUT plug.  
2
Operate the DVD/CD player using the remote controller by  
referring to the monitor screen.  
3
To cancel Dual Zone operations  
On the control panel:  
1
2
Enter Dual Zone settings.  
Activate or deactivate Dual Zone.  
• DUAL indicator goes off.  
The source automatically changes to “DISC” when  
Dual Zone is activated.  
OPERATIONS  
25  
Listening to the Bluetooth® devices  
For Bluetooth operations, it is required to connect the  
Bluetooth Adapter (KS-BTA200) to the CD changer  
jack on the rear of this unit.  
Registering using “Open”  
Preparation: Operate the device to turn on its  
Bluetooth function.  
• Refer also to the instructions supplied with the  
Bluetooth adapter and the Bluetooth device.  
• Refer to the list (included in the box) to check  
the countries where you may use the Bluetooth®  
function.  
1
Select “BT-PHONE” or “BT-AUDIO.”  
To use a Bluetooth device through the unit  
(“BT-PHONE” and “BT-AUDIO”) for the first time,  
you need to establish Bluetooth wireless connection  
between the unit and the device.  
2
Select “New.”  
• Once the connection is established, it is registered in  
the unit even if you reset your unit. Up to five devices  
can be registered in total.  
• Only one device can be connected at a time for each  
source (“BT-PHONE” and “BT-AUDIO”).  
3
4
Enter setting menu.  
Select “Open.”  
Registering a Bluetooth device  
Registration (Pairing) methods  
Use either of the following items in the Bluetooth menu  
to register and establish the connection with a device.  
• Select “BT-PHONE” or “BT-AUDIO” as the source to  
operate the Bluetooth menu.  
5
Enter a PIN (Personal Identification Number)  
code to the unit.  
• You can enter any number you like (1-digit to  
16-digit number). [Initial: 0000]  
• To enter a PIN code less than 4-digit, firstly  
delete the initial PIN code (0000) by pressing  
Open  
Make the unit ready to establish a new  
Bluetooth connection.  
Connection is established by operating the  
Bluetooth device.  
Search Make the unit ready to establish a new  
Bluetooth connection.  
number button 5 (  
) .  
* Some devices have their own PIN code. Enter the  
specified PIN code to the unit.  
Connection is established by operating  
the unit.  
1
Move to the next (or previous) number  
position.  
• When  
is shown on the display, you can  
move back to the previous screen by pressing number  
button 3.  
26  
2
Select a number or blank space.  
2
3
Select a device you want to connect.  
• For available devices...  
1 Enter the specific PIN code of the device to  
the unit.  
3
4
Repeat steps 1 and 2 until you finish  
entering a PIN code.  
Confirm the entry.  
Refer to the instructions supplied with the  
device to check the PIN code.  
“Open...” flashes on the display.  
2 Use the Bluetooth device to connect.  
Now connection is established and you can  
use the device through the unit.  
6
Use the Bluetooth device to search and  
connect.  
On the device to be connected, enter the same  
PIN code you have just entered for this unit.  
“Connected (and device name)” appears on the  
display.  
• For special device...  
Use “Open” or “Search” to connect.  
Connecting/disconnecting/deleting a  
registered device  
Now connection is established and you can use the  
device through the unit.  
1
Select “BT-PHONE” or “BT-AUDIO.”  
The device remains registered even after you  
disconnect the device. Use “Connect“ (or activate  
Auto Connect”) to connect the same device from  
next time on. (See the following and page 47.)  
2
Select a registered device you want to  
connect/disconnect/delete.  
Connecting a device  
Perform steps 1 3 on page 26, then...  
1
• Select “Search” to search for available  
devices.  
The unit searches and displays the list of the  
available devices.  
If no available device is detected, “Device not  
found” appears.  
3
4
Enter setting menu.  
• Select “Special” to connect a special device.  
The unit displays the list of the preset devices.  
• Select “Connect” or “Disconnect” to  
connect/disconnect the selected device.  
Continued on the next page  
EXTERNAL DEVICES 27  
• Select “Delete,” then confirm the selection.  
Press number button 3 to  
select “No” or return to the  
previous screen.  
You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See  
Auto Connect” on page 47.)  
Using the Bluetooth cellular phone  
Select “BT-PHONE.”  
1
Enter Bluetooth menu.  
2
Establish the connection with a device, then make a call (or settings  
using the Bluetooth menu). (See pages 29 and 47.)  
3
When a call comes in....  
When a text message comes in....  
The source is automatically changed to “BT-PHONE.”  
If the cellular phone is compatible with Text Message  
(notified through JVC Bluetooth adapter) and “Message  
Info” is set to “Auto” (see page 47), the unit rings and  
“Received Message” appears on the display to inform  
you of the message arrival.  
When “Auto Answer” is activated....  
The unit answers the incoming calls automatically, see  
page 47.  
• When “Auto Answer” is deactivated, press any  
button (except  
incoming call.  
/control dial) to answer the  
To end the call  
Hold any button (except  
/control dial).  
• You can adjust the microphone volume level (see  
page 47).  
28  
Making a call  
You can make a call using one of the Dial Menu items.  
* Displayed only when your cellular phone is  
equipped with these functions.  
• When  
is shown on the display, you can  
– If not displayed, try to transfer the phone book  
memory of the cellular phone to this unit.  
(Refer to the instruction manual supplied with  
your cellular phone.)  
– With some cellular phones, the phone book  
memory is transferred automatically.  
move back to the previous screen by pressing number  
button 3.  
1
Select “BT-PHONE.”  
5
Select the name/phone number you want to  
call.  
2
3
Enter setting menu.  
Select “Dial Menu.”  
How to enter phone number  
Select a number.  
4
Select the method to make a call.  
Move the entry position.  
Confirm the entry.  
Redial*: Shows the list of the phone numbers  
you have dialed. Go to the following step.  
Received*: Shows the list of the received calls.  
Go to the following step.  
Phonebook*: Shows the phone book of the  
connected cellular phone. Go to the following  
step.  
Missed*: Shows the list of the missed calls. Go  
to the following step.  
Number: Shows the phone number entry  
screen. See “How to enter phone number” on the  
right column.  
Voice Dial (Only accessible when the connected  
cellular phone has the voice recognition system):  
Speak the name (registered words) you want to  
call.  
Continued on the next page  
EXTERNAL DEVICES 29  
Using voice command  
2
3
Select a phone number.  
You can also enter a new phone  
1
“Say...” appears on the display.  
number (see also “How to enter  
phone number” on page 29) to store.  
2
Speak the name (registered words) you want  
to call.  
Select a preset number to store.  
• You can also use voice command from the Dial  
Menu. Select “Voice Dial” from the Dial Menu.  
• If your cellular phone does not support the voice  
recognition system, “Error” appears on the  
display.  
To call a preset number  
While in Bluetooth phone....  
Presetting the phone number  
You can preset up to six phone numbers.  
• When is shown on the display, you can  
move back to the previous screen by pressing number  
button 3.  
Display the phone number you want to  
preset by using one of the “Dial Menu” items.  
1
Using the Bluetooth audio player  
• Operations and display indications differ depending on their availability on the connected audio player.  
Select “BT-AUDIO.”  
If playback does not start automatically, operate the Bluetooth audio player to start playback.  
• If playback does not pause when you change the source, operate the Bluetooth audio player to  
pause playback.  
• Refer also to pages 27 and 28 for connecting/  
Reverse skip/forward skip  
disconnecting/deleting a registered device.  
Start/pause playback  
Bluetooth Information:  
If you wish to receive more information about  
Bluetooth, visit the following JVC web site: <http://  
www.jvc-victor.co.jp/english/car/>.  
Enter setting menu (Device list)  
30  
Listening to the CD changer  
It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the  
CD changer jack on the rear of the unit.  
• You can only play conventional CDs (including CD Text) and MP3 discs.  
Preparation: Make sure “Changer” is selected for the external input setting, see page 42.  
Select “CD-CH.”  
1
Select a disc to start playing.  
[Press] For selecting disc number 1 – 6.  
[Hold] For selecting disc number 7 – 12.  
2
After pressing M MODE, press the following buttons to...  
[Press] Select track  
Skip 10 tracks  
[Hold] Reverse/fast-forward track  
MP3: Within the same folder  
*
MP3: Select folders  
Repeat Track:  
Repeat current track  
Repeat Folder:  
MP3: Repeat all tracks of current  
folder  
* By holding either one of the buttons, you can display  
the Disc List (see page 17).  
Repeat Disc:  
Repeat all tracks of the current disc  
To select a disc/folder/track on the list  
See “Selecting a folder/track on the list (only for MP3/  
WMA/WAV file)” on page 17.  
Select “Disc” in step 3 to display the Disc List of the CD  
changer.  
Random Folder:  
MP3: Randomly play all tracks of  
the current folder, then tracks of the  
next folder  
Random Disc:  
Randomly play all tracks of current  
disc  
Random All:  
Randomly play all tracks of the discs  
in the magazine  
• You can also cancel the playback mode by selecting  
Off” or press number button 4 (  
).  
EXTERNAL DEVICES 31  
Listening to the iPod  
You can connect an Apple iPod using the following cable or adapter:  
To:  
Cable or adapter:  
Connect to:  
Listen to the  
music  
USB 2.0 cable (supplied for the iPod)  
USB input jack on the control panel  
Interface adapter for iPod, KS-PD100  
(not supplied)  
CD changer jack on the rear of the unit  
Preparation: Make sure “Changer” is selected for  
the external input setting, see page 42.  
Watch the video USB Audio and Video cable for iPod,  
KS-U19 (not supplied)  
USB input jack and AV-IN input jack on the control  
panel  
• Turn on the monitor to watch the video.  
• You can control playback from the unit.  
• Disconnecting the iPod will stop playback. Press SOURCE to listen to another playback source.  
• For details, refer also to the manual supplied for your iPod.  
• See also page 53.  
Caution:  
• Avoid using the iPod if it might hinder your safety while driving.  
• Make sure all important data has been backed up to avoid losing the data.  
When connecting with the USB cable  
Connect using USB 2.0 cable (supplied for iPod): Connect using USB Audio and Video cable for  
iPod, KS-U19 (not supplied):  
AV-IN input jack  
USB input jack  
USB input jack  
USB cable supplied  
for your iPod  
KS-U19 (not supplied)  
Playback starts automatically from where it had been paused previously.*  
* Not applicable for video files.  
32  
Operations using the control  
screen  
[Press] Go to the next or previous  
track  
[Hold] Fast-forward or reverse the  
track during playback  
• These operations are possible on the monitor using  
the remote controller.  
[Hold] Enter main menu  
• Connect your iPod to the USB input jack on the  
control panel using the USB cable supplied for your  
iPod, or KS-U19 for watching video file.  
[Press] Pause/resume playback.  
1
Turn on the monitor.  
Selecting a track from the menu  
1
2
3
Enter the main menu.  
Select the desired menu.  
Confirm the selection.  
Control screen appears on the monitor.  
1
2
Current category number/total category  
number  
Category list with the current category  
selected  
3
4
5
Elapsed playing time of the current track  
Operation mode icon ( 3, 7, 8, ¡, 1 )  
Current track number/total number of tracks  
in the current category  
Track information  
Track list with the current track selected  
• By holding ¢ , you can start play back the  
selected item directly.  
• By holding 4 , you can exit from the menu.  
• By holding 5/, you can fast skip in every layer of  
the main menu.  
6
7
Menu items:  
For Music:  
“Playlists,” “Artists,” “Albums,” “Songs,” “Podcasts,”  
“Genres,” “Composers,” or “Audiobooks”  
For Videos:  
“Video Playlists,” “Movies,” “Music Videos,” “TV Shows,”  
or “Video Podcasts”  
• If a track is selected, playback starts automatically.  
• If the selected item has another layer, you will enter  
the layer. Repeat steps 2 and 3 until the desired track  
is played.  
Continued on the next page  
EXTERNAL DEVICES 33  
To return to the previous search mode screen,  
press MENU.  
2
Select the desired item.  
To return to the control screen, press RETURN.  
To select a playback mode/change the speed  
of the Audiobooks  
If the selected item has another layer, you will  
enter the layer. Repeat this step until the desired  
track is played.  
1
While control screen is displayed...  
To select a track from Search Mode  
Playback mode selection screen appears on the  
category list section of the control screen.  
1
Enter Search Mode menu.  
or  
2
3
Select an item.  
Select a playback mode/speed.  
REPEAT:  
RANDOM:  
2
3
Select an menu item.  
AUDIO BOOK:  
• Selecting Shuffle Songs starts playback.  
REPEAT ONE  
REPEAT ALL  
Same as “Repeat One.”  
Same as “Repeat All.”  
Same as “Shuffle Albums.”  
Select a search mode category, then the desired  
track/video.  
RANDOM  
ALBUMS*  
RANDOM  
SONGS  
Same as “Shuffle Songs.”  
NORMAL  
FASTER  
SLOWER  
Plays at normal speed.  
Plays faster.  
Search modes category:  
For Music:  
“Playlists,” “Artists,” “Albums,” “Songs,” “Podcasts,”  
“Genres,” “Composers,” or “Audiobooks”  
For Videos:  
Plays slower.  
* Functions only if you select “All Albums” or “All” in  
“Albums” of the main “MENU.”  
“Video Playlists,” “Movies,” “Music Videos,”  
“TV Shows,” or “Video Podcasts”  
• Available Search Modes depend on the type of your  
iPod.  
34  
4
Confirm the selection.  
Selecting a track from the menu  
1
2
Enter the main menu.  
• You can also change the settings from the PSM  
(Preferred Setting Mode) items. See “AudioBooks” on  
page 42.  
Select the desired menu.  
When connecting with the  
interface adapter  
Playlists Ô Artists Ô Albums Ô Songs Ô  
Genres Ô Composers  
CD changer jack  
3
Confirm the selection.  
• By holding 4 /¢ , you can fast skip  
during song search in the main menu.  
• If a track is selected, playback starts automatically.  
• If the selected item has another layer, you will enter  
the layer. Repeat steps 2 and 3 until the desired track  
is played.  
Selecting the playback modes  
Playback starts automatically from where it had been  
paused previously.  
• If an iPod has been connected, press SOURCE to select  
“iPod” to listen to music.  
After pressing M MODE, press the following buttons  
to...  
Repeat One:  
Same as “Repeat One.”  
Repeat All:  
Same as “Repeat All.”  
Repeat Off:  
Cancels.  
Random Album*2:  
Same as “Shuffle Albums.”  
Random Song:  
Same as “Shuffle Songs.”  
Random Off:  
[Press] Go to the next or previous  
track  
[Hold] Fast-forward or reverse the  
track during playback  
[Press] Enter main menu when you  
press 5. Pause/resume  
1
*
playback when is pressed.  
Cancels.  
1
2
*
*
Not applicable for video files.  
Functions only if you select “All Albums” or “All” in  
“Albums” of the main “MENU.”  
Continued on the next page  
EXTERNAL DEVICES 35  
The menu selecting mode will be canceled:  
• If no operations are performed for about:  
– 5 seconds for iPod connected through KS-PD100.  
– 15 seconds for iPod connected to the USB input  
jack.  
• When you confirm the selection of a track.  
Listening to the other external components  
You can connect an external component to:  
• CD changer jack on the rear of this unit using the following adapters:  
Line Input Adapter, KS-U57  
AUX Input Adapter, KS-U58  
Preparation: Make sure “Ext In” is selected for the external input setting, see page 42.  
• AV-IN (video) input jack on the control panel.  
Preparation: Make sure to connect and turn on the monitor to watch the playback picture. If the parking brake  
is not engaged, “Parking Brake” appears on the display and no playback video on the monitor. For connection, see  
Installation/Connection Manual (separate volume).  
• LINE IN terminals on the rear of this unit.  
Select “EXT IN,” “LINE IN,” or “AV IN.”  
1
Turn on the connected component and start playing the source.  
Adjust the volume.  
2
3
Adjust the sound as you want (see pages 38 and 39).  
4
36  
Connecting an external component to the AV-IN input jack  
Portable Video/Audio  
player*  
AV mini plug cable (supplied)  
* Portable Video/Audio player of this pin-allocation can be connected:  
1
2
3
4
Audio (R)  
Video  
GND  
GND  
Video  
Audio (L)  
Camcorder  
Audio (R) Audio (L)  
Audio (R) Audio (L)  
iPod, etc.  
AUX  
GND  
EXTERNAL DEVICES 37  
Selecting a preset sound mode  
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).  
Select “EQ.”  
1
2
Select “On.”  
• If “Bypass” is selected, you can listen to the original  
sound mode recorded.  
display.  
lights up on the  
Select a preset sound mode.  
3
Preset value setting for each sound mode  
Sound mode  
Preset value  
Band 1 (100 Hz) Band 2 (320 Hz) Band 3 (1 kHz) Band 4 (3.2 kHz) Band 5 (10 kHz)  
USER  
ROCK  
CLASSIC  
POPS  
HIP HOP  
JAZZ  
0
0
0
0
0
0
–2  
+1  
0
0
+1  
0
+2  
+1  
+2  
+3  
+2  
0
+4  
+3  
+2  
+2  
+1  
+1  
+2  
+1  
+1  
+1  
0
+2  
Adjusting the sound  
You can adjust the sound characteristics to your  
preference.  
3
Adjust the selected setting item.  
A
Fad/Bal (Fader/Balance)  
1
Press number button 1 (  
)
to move to the “Fad/Bal” adjustment  
display.  
• When  
is shown on the display, you can  
move back to the previous screen by pressing number  
button 3 or 6.  
2
Adjust the speaker output balance by  
pressing:  
1
5 / : between the front and rear  
speakers. [F6 to R6]  
4
/¢ : between the left and  
right speakers. [L6 to R6]  
Subwoofer  
2
B
1
Press number button 1 (  
) to  
move to the “Subwoofer” adjustment  
display.  
• For “EQ” setting, see above.  
2
Use 4 /¢ to select a cutoff  
frequency to the subwoofer.  
• Off*: All signals are sent to the  
subwoofer.  
38  
• 55Hz: Frequencies higher than 55 Hz  
are cut off.  
• 85Hz: Frequencies higher than 85 Hz  
are cut off.  
• 120Hz: Frequencies higher than 120 Hz  
are cut off.  
Turn the control dial to adjust the  
subwoofer output level. [0 to 8]  
Storing your own sound modes  
You can adjust the sound modes and store your own  
adjustments in memory.  
• When  
is shown on the display, you can  
move back to the previous screen by pressing number  
button 6.  
3
4
1
Press number button 1 (  
) to  
move to another setting level.  
2
3
Select a sound mode.  
4
/¢ : select the quality of  
LPF. [–12dB/oct or –24dB/oct]  
Control dial: Turn the control dial to select  
the subwoofer phase. [0deg (normal) or  
180deg (reverse)]  
Select a frequency range to adjust.  
* If “Off” is selected in step 2, you can only  
adjust the subwoofer phase.  
C
Hi Pass (Hi Pass Filter)  
Turn the control dial to select the cutoff  
frequency to the front/rear speakers. Set this  
to match the LPF setting.  
4
Adjust the sound elements of the selected  
frequency range.  
• Off:  
All signals are sent to the front/rear  
speakers.  
1
Press 4 /¢ to select the  
frequency band, then press 5 / to  
enhanced level for the selected frequency  
band. [–6 to +6]  
• 62Hz: Frequencies lower than 62 Hz are  
cut off.  
• 95Hz: Frequencies lower than 95 Hz are  
cut off.  
• 135Hz: Frequencies lower than 135 Hz are  
cut off.  
VolAdjust, [–5 to +5]  
2
3
Press number button 5 (  
the control dial to select the frequency.  
Press number button 5 (  
), then turn  
), then turn  
D
the control dial to select the quality slope (Q).  
Turn the control dial to adjust the input level  
of each source (except FM).  
Adjust to match the input level of the FM  
sound level.  
• Before making an adjustment, select the  
source you want to adjust.  
5
6
Repeat steps 3 and 4 to adjust the other  
frequency bands.  
Store the adjustments.  
E
Loudness, [Off or On]  
Turn the control dial to select “Off” or  
“On.” When “On” is selected, low and high  
frequencies sound are boosted to produce a  
well-balanced sound at low volume level.  
4
Exit from the setting.  
SETTINGS 39  
General settings—PSM  
You can change PSM (Preferred Setting Mode) items  
listed in the table below and on pages 41 and 42.  
4
Adjust the selected PSM item.  
1
Enter the PSM settings.  
5
6
Repeat steps 2 – 4 to adjust other PSM items  
if necessary.  
2
Select a PSM category.  
Finish the procedure.  
To display the rest  
3
Select a PSM item.  
By pressing either one of the buttons repeatedly,  
you can also move to the item of the other  
categories.  
Category Indication  
Item  
Setting, [reference page]  
(
: Initial)  
Demo  
Display  
demonstration  
On  
:
Display demonstration will be activated automatically if no  
operation is done for about 20 seconds, [7].  
Cancels.  
Off  
:
:
LevelMeter  
Meter 1  
Select the different level meter patterns.  
Audio level meter Meter 2  
• Press DISP to show the selected level meter.  
Clock Disp*1  
Clock display  
On  
:
Clock time is shown on the display when the power is  
turned off.  
Off  
:
Cancels; pressing DISP will show the clock time for about  
5 seconds when the power is turned off, [7].  
1
*
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “Off” to  
save the car’s battery.  
40  
Category Indication  
Clock Hr  
Item  
Setting, [reference page]  
(
: Initial)  
1 – 12AM/  
1 – 12PM  
(0 – 23)  
:
Initial: 1 (1:00AM), [7].  
Hour adjustment  
Clock Min  
Minute adjustment  
00 – 59  
:
:
Initial: 00 (1:00AM), [7].  
24H/12H  
12Hours  
See also page 7 for setting.  
Time display mode 24Hours  
Scroll*2  
Scroll  
Once  
Auto  
Off  
:
:
:
Scrolls the track information once.  
Repeats scrolling (at 5-second intervals).  
Cancels. (Holding DISP can scroll the display regardless of the  
setting.)  
Dimmer  
Dimmer  
Auto  
Off  
On  
:
:
:
:
Dims the display when you turn on the headlights.  
Cancels.  
Dims the display and button illumination.  
Set the timer for dimmer, [43].  
Any hour – Any hour  
Time Set  
From – To*3  
:
:
Initial: 6PM – 7AM.  
Contrast  
Contrast  
1 – 8  
Initial: 5  
Adjust the display contrast to make the display indications  
clear and legible.  
LCD Type  
Display type  
Auto  
:
Positive pattern will be selected during the day time*4; while  
negative pattern will be used during the night time*4.  
Positive pattern of the display.  
Positive  
Negative  
:
:
Negative pattern of the display.  
Tag  
Tag display  
On  
Off  
:
:
Shows the tag while playing MP3/WMA/WAV tracks.  
Cancels.  
NTSC/PAL*5  
Video format  
PAL  
NTSC  
:
:
Select this if your monitor is of the PAL color system.  
Select this if your monitor is of the NTSC color system.  
2
3
4
5
*
*
*
*
Some characters or symbols will not be shown correctly (or will be blanked) on the display.  
Adjustable only when “Dimmer” is set to “Time Set.”  
Depends on the “Dimmer” setting.  
The newly selected video format takes effect only after you turn on the power again or change the source.  
Continued on the next page  
SETTINGS 41  
Category Indication  
Item  
Setting, [reference page]  
(
: Initial)  
IF Band  
Intermediate  
frequency band  
Auto  
:
:
Increases the tuner selectivity to reduce interference noises  
between adjacent stations. (Stereo effect may be lost.)  
Subject to interference noises from adjacent stations, but  
sound quality will not be degraded and the stereo effect will  
remain.  
Wide  
Ext Input*6  
External input  
Changer  
Ext In  
:
:
To use a JVC CD changer, [31], or an Apple iPod, [32].  
To use any other external component, [36].  
AudioBooks*7  
Speed control of  
“Audiobook”  
Normal  
Faster  
Slower  
:
You can select the playback speed of the “Audiobook” sound  
file in your iPod.  
• Initial selected item depends on your iPod setting.  
Amp Gain  
Amplifier gain  
control  
High PWR  
Low PWR  
:
:
Volume 00 – Volume 50  
Volume 00 – Volume 30 (Select if the maximum power of each  
speaker is less than 50 W to prevent damaging the speaker.)  
Rear Spk*8  
Rear speaker output Off  
On  
:
:
Select this to turn on the rear speaker output.  
Cancels.  
Color Sel  
Color selection  
Initial: All  
Source;  
:
Select your favorite display color for each source (or for all  
sources), [43, 44].  
Color: Pale  
Color Set  
Color setting  
:
Create your own colors, and select them for the display color,  
[44].  
Day Color  
NightColor  
00 — 11  
00 — 11  
00 — 11  
:
:
:
:
:
User color during the day time*9.  
User color during the night time*9.  
Initial: Day Color: 07, NightColor: 05  
Initial: Day Color: 07, NightColor: 05  
Initial: Day Color: 07, NightColor: 05  
Red  
Green  
Blue  
Key Illum  
Illumination switch Green  
Red  
:
You can select some of the buttons illumination according to  
your preference.  
6
*
Displayed only when one of the following sources is selected—TUNER, DISC, USB, USB-iPod, LINE IN, AV IN, or  
Bluetooth.  
Displayed only when an iPod is connected to the USB input jack and playback is controlled from the unit.  
Displayed only when Dual Zone is activated (see page 25).  
Depends on the “Dimmer” setting.  
7
8
9
*
*
*
42  
Setting the time for dimmer  
Changing the display color  
• When  
is shown on the display, you can  
You can select your favorite display color for each source  
move back to the previous screen by pressing number (or all sources).  
button 3. • When  
Follow steps 1 to 3 on page 40.  
is shown on the display, you can  
move back to the previous screen by pressing number  
button 3 or 6.  
1
• In step 2, select “DISP.”  
Setting the display color  
• In step 3, select “Dimmer.”  
1
Follow steps 1 to 3 on page 40.  
• In step 2, select “COLOR.”  
• In step 3, select “Color Sel.”  
2
Select “Time Set.”  
2
3
Select a source.  
3
4
Adjust the dimmer start time.  
1
Turn the control dial to set the dimmer start  
time.  
All Source*1 Ô DISC Ô Changer*3 (or  
Ext In*2) Ô Line In Ô USB*3 Ô FM  
Ô AM Ô iPod*3 Ô BT Phone*3 Ô BT  
Audio*3 Ô AV In Ô (back to the beginning)  
2
Press ¢ to select “To.” Then, turn the  
control dial to set the dimmer end time.  
Exit from the setting.  
1
*
When you select “All Source,” you can use the  
same color for all the sources.  
2
3
*
*
Depends on the “Ext Input” setting, see page 42.  
Displayed only when the target component is  
connected.  
Continued on the next page  
SETTINGS 43  
Creating your own color—User Color  
You can create your own colors—“Day Color” or  
“NightColor.”  
4
Select a color.  
1
Follow steps 1 to 3 on page 40.  
• In step 2, select “COLOR.”  
• In step 3, select “Color Set.”  
Pale Ô Aqua Ô Sky Ô Sea Ô Leaves  
Ô Grass Ô Apple Ô Rose Ô Amber Ô  
Honey Ô Violet Ô Grape Ô Every*4 Ô  
User*5 Ô (back to the beginning)  
2
Select “Day Color” or “NightColor.”  
4
*
*
The color changes every 2 seconds.  
The user-edited colors—“Day Color” and  
“NightColor” will be applied (see the right  
column for details).  
5
3
4
Select a primary color.  
5
6
Repeat steps 3 and 4 to select the color for  
each source (except when selecting “All  
Source” in step 3).  
Adjust the level (00 to 11) of the selected  
primary color.  
Exit from the setting.  
5
6
Repeat steps 3 and 4 to adjust other primary  
colors.  
Exit from the setting.  
44  
Disc setup menu  
These operations are possible on the monitor using the remote controller.  
1
2
3
Enter the disc setup menu while stop.  
Select a menu.  
Select an item you want to set up.  
• To cancel pop-up menu, press RETURN.  
4
Select an option.  
To return to normal screen  
Menu  
Item  
MENU  
Setting  
Select the initial disc menu language. Refer also to “Language codes” on page 57.  
LANGUAGE  
AUDIO  
Select the initial audio language. Refer also to “Language codes” on page 57.  
LANGUAGE  
SUBTITLE  
Select the initial subtitle language or remove the subtitle (OFF). Refer also to  
“Language codes” on page 57.  
ON SCREEN  
LANGUAGE  
Select the language for the on screen display.  
MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor.  
Continued on the next page  
SETTINGS 45  
Menu  
Item  
Setting  
OSD POSITION Select the on-screen bar position on the monitor.  
1  
2  
:
:
Higher position  
Lower position (Guidance below the disc setup menu will disappear.)  
DIGITAL AUDIO Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.  
OUTPUT  
OFF  
PCM ONLY  
:
:
Cancels.  
Select for an amplifier or a decoder incompatible  
with Dolby Digital, DTS, MPEG Audio, or when  
connecting to a recording device.  
Select for an amplifier or a decoder compatible  
with Dolby Digital.  
DOLBY DIGITAL/PCM  
:
:
STREAM/PCM  
Select for an amplifier or a decoder compatible  
with Dolby Digital, DTS, and MPEG Audio.  
DOWN MIX  
D. RANGE  
When playing back a multi-channel disc, this setting affects the signals reproduced  
through the LINE OUT jacks (and through the DIGITAL OUT terminal when “PCM  
ONLY” is selected for “DIGITAL AUDIO OUTPUT”).  
SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by  
connecting an amplifier compatible with Dolby  
Surround.  
STEREO  
:
Normally select this.  
You can enjoy a powerful sound at low or middle volume levels while playing a  
COMPRESSION Dolby Digital software.  
AUTO  
:
:
Select to apply the effect to multi-channel  
encoded software (excluding 1-channel and  
2-channel software).  
ON  
Select to always use this function.  
DivX  
This unit has its own Registration Code. Once you have played back a disc in which  
REGISTRATION the Registration Code recorded, this unit’s Registration Code is overwritten for  
copyright protection.  
FILE TYPE (DISC) Select playback file type when a disc contains different types of files.  
AUDIO  
VIDEO  
AUDIO + VIDEO  
:
:
:
Play MP3/WMA/WAV files.  
Play DivX/MPEG Video files.  
Play MP3/WMA/WAV/DivX/MPEG Video files.  
FILE TYPE (USB) Select playback file type when a USB contains different types of files.  
AUDIO  
VIDEO  
AUDIO + VIDEO  
:
:
:
Play MP3/WMA/WAV files.  
Play DivX/MPEG Video files.  
Play MP3/WMA/WAV/DivX/MPEG Video files.  
46  
Bluetooth settings  
You can change the settings listed on the right column  
according to your preference.  
Setting menu ( : Initial)  
Auto Connect  
When the unit is turned on, the connection is  
established automatically with...  
• When  
is shown on the display, you can  
move back to the previous screen by pressing number  
button 3.  
Off:  
No Bluetooth device.  
Last:  
The last connected Bluetooth device.  
1
Select “BT-PHONE” or “BT-AUDIO.”  
Order: The available registered Bluetooth device  
found at first.  
Auto Answer  
Only for the device being connected for “BT-PHONE.”  
On:  
The unit answers the incoming calls  
automatically.  
The unit does not answer the calls  
automatically. Answer the calls manually.  
2
3
Enter the Bluetooth menu.  
Select “Setting.”  
Off:  
Reject: The unit rejects all incoming calls.  
Message Info  
Only for the device being connected for “BT-PHONE.”  
Auto:  
The unit informs you of the arrival of  
a message by ringing and displaying  
“Received Message.”  
4
Select a setting item.  
Manual: The unit does not inform you of the arrival of  
a message.  
MIC setting (microphone setting)  
Only for the device being connected for “BT-PHONE.”  
Adjust the built-in microphone volume,  
[LEVEL 01/02/03].  
1
*
*
Displayed only when a Bluetooth phone is  
connected.  
Appears only when a Bluetooth phone is  
connected and it is compatible with text message  
(notified through JVC Bluetooth adapter).  
Bluetooth Audio: Shows only “Version.”  
Version  
2
3
The Bluetooth software and hardware versions are  
shown.  
*
5
Change the setting accordingly.  
SETTINGS 47  
Title assignment  
You can assign titles to 30 station frequencies (FM and  
AM) using 10 characters (maximum) for each title.  
To erase the entire title  
In step 3 on the left column...  
• When  
is shown on the display, you can  
move back to the previous screen by pressing number  
button 3.  
1
Select “TUNER.”  
Available characters  
Upper case  
2
3
Show the title entry screen.  
Lower case  
Numbers and symbols  
Assign a title.  
1
Press number button 4 (  
to select a character set.  
) repeatedly  
2
3
4
Turn the control dial to select a character. (For  
available characters, see the right column.)  
Use 4 /¢ to move to the next (or  
previous) character position.  
Repeat steps 1 to 3 until you finish entering  
the title.  
4
Store the title.  
48 SETTINGS  
Maintenance  
How to clean the connectors  
To keep discs clean  
Frequent detachment will deteriorate the connectors.  
To minimize this possibility, periodically wipe the  
connectors with a cotton swab or cloth moistened with  
alcohol, being careful not to damage the connectors.  
A dirty disc may not play correctly.  
If a disc does become dirty, wipe it with  
a soft cloth in a straight line from center  
to edge.  
• Do not use any solvents (for example, conventional  
record cleaner, spray, thinner, benzine, etc.) to clean  
discs.  
Connectors  
To play new discs  
New discs may have some rough spots  
around the inner and outer edges. If  
such a disc is used, this unit may reject  
the disc.  
Moisture condensation  
Moisture may condense on the lens inside the unit in  
the following cases:  
• After starting the heater in the car.  
To remove these rough spots, rub the edges with a  
pencil or ball-point pen, etc.  
• If it becomes very humid inside the car.  
Should this occur, the unit may malfunction. In this  
case, eject the disc and leave the unit turned on for a  
few hours until the moisture has evaporated.  
Do not use the following discs:  
Single CD (8 cm disc)  
Warped disc  
How to handle discs  
When removing a disc from its case,  
press down the center holder of the  
case and lift the disc out, holding it by  
the edges.  
Center holder  
Sticker and  
sticker residue  
Stick-on label  
• Always hold the disc by the edges. Do not touch its  
recording surface.  
When storing a disc in its case, gently insert the  
disc around the center holder (with the printed surface  
facing up).  
C-thru Disc (semi-  
transparent disc)  
Unusual shape  
• Make sure to store discs in cases after use.  
Transparent or semi-transparent  
parts on its recording area  
REFERENCES 49  
More about this unit  
Basic operations  
Disc operations  
Turning on the power  
General  
• By pressing SOURCE on the unit, you can also turn on  
the power. If the source is ready, playback also starts.  
• In this manual, words “track” and “file” are  
interchangeably used.  
• This unit can only play back audio CD (CD-DA) files if  
different type of files are recorded in the same disc.  
Turning off the power  
• If you turn off the power while listening to a track,  
playback will start from where it had been stopped  
previously next time you turn on the power.  
Inserting a disc  
• When a disc is inserted upside down, “Please Eject”  
appears on the display. Press OPEN, then 0 to eject  
the disc.  
General  
• If you change the source while listening to a disc,  
playback stops.  
Ejecting a disc  
Next time you select “DISC” as the playback source,  
playback will start from where it had been stopped  
previously.  
• After ejecting a disc or removing a USB device,  
“No Disc” or “No USB” appears and you cannot  
operate some of the buttons. Insert another disc,  
reattach a USB device, or press SOURCE to select  
another playback source.  
• If the ejected disc is not removed within 15 seconds,  
the disc is automatically inserted again into the  
loading slot to protect it from dust. Playback starts  
automatically.  
• After ejecting a disc, “NO DISC” appears and you  
cannot operate some of the buttons. Insert another  
disc or press SOURCE to select another playback  
source.  
Playing Recordable/Rewritable discs  
Tuner operations  
• This unit can recognize a total of 5 000 files and 250  
folders (a maximum of 999 files per folder).  
• This unit can recognize a total 25 characters for file/  
folder names.  
Storing stations in memory  
• During SSM search...  
– All previously stored stations are erased and the  
stations are stored anew.  
– Received stations are preset in No. 1 (lowest  
frequency) to No. 6 (highest frequency).  
– When SSM is over, the station stored in No. 1 will  
be automatically tuned in.  
• When storing a station manually, the previously  
preset station is erased when a new station is stored  
in the same preset number.  
• Use only “finalized” discs.  
• This unit can play back multi-session discs; however,  
unclosed sessions will be skipped while playing.  
• This unit may be unable to play back some discs  
or files due to their characteristics or recording  
conditions.  
• Rewritable discs may require a longer readout time.  
50  
• Audio stream should conform to MP3 or Dolby  
Digital.  
• This unit does not support GMC (Global Motion  
Compression).  
Playing DVD-VR files  
• For details about DVD-VR format and playlist, refer  
to the instructions supplied with the recording  
equipment.  
• The file encoded in the interlaced scanning mode  
may not be played back correctly.  
• This unit cannot play back the following files:  
– Files encoded in Codec (Compressor-decompressor)  
other than DivX Codec.  
• The maximum bit rate for video signals (average) is  
4 Mbps.  
• If you want to know more about DivX, visit  
<http://www.divx.com>.  
Playing MP3/WMA/WAV files  
• The maximum number of characters for folder and  
file names is 25 characters; 128 characters for MP3/  
WAV and 64 characters for WMA tag information.  
• This unit can play back files with the extension code  
<.mp3>, <.wma>, or <.wav> (regardless of the  
letter case—upper/lower).  
• This unit can show the names of albums, artists  
(performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or  
2.4) for the MP3/WMA/WAV files.  
• This unit can display only one-byte characters. No  
other characters can be correctly displayed.  
• This unit can play back files recorded in VBR (variable  
bit rate).  
Files recorded in VBR have a discrepancy in elapsed  
time indication.  
Playing MPEG Video files  
• This unit can play back MPEG Video files with the  
extension code <.mpg>, <.mpeg>, or <.mod>*.  
* <.mod> is an extension code used for the MPEG-2 files  
recorded by JVC Everio camcorders.  
• Audio stream should conform to MPEG1 Audio  
Layer 2.  
• This unit cannot playback the following files:  
– WMV (Windows Media Video) files  
– RM (Real Media) format files  
• The maximum bit rate for video signals (average) is  
4 Mbps.  
• This unit cannot play back the following files:  
– MP3 files encoded with MP3i and MP3 PRO format.  
– MP3 files encoded with Layer 1/2.  
– WMA files encoded with lossless, professional, and  
voice format.  
– WMA files which are not based upon Windows  
Media® Audio.  
Changing the source  
– WMA files copy-protected with DRM.  
– Files which have the data such as ATRAC3, etc.  
– AAC files and OGG files.  
• If you change the source, playback also stops  
(without ejecting the disc).  
Next time you select “DISC” for the playback source,  
disc play starts from where it has been stopped  
previously.  
Playing DivX files  
• This unit can play back DivX files with the extension  
code <.divx>, <.div>, <.avi> (regardless of the  
letter case—upper/lower).  
• This unit supports DivX Media Format files, <.divx>  
or <.avi>.  
• This unit can display a unique registration code—  
DivX Video-on-Demand (VOD—a kind of Digital  
Rights Management). For activation and more  
details, visit <www.divx.com/vod>.  
USB operations  
• Connecting a USB device automatically changes the  
source to “USB.”  
• While playing from a USB device, the playback order  
may differ from the one from other players.  
• This unit may be unable to play back some USB  
devices or some files due to their characteristics or  
recording conditions.  
Continued on the next page  
REFERENCES 51  
• Depending on the shape of the USB devices and  
connection ports, some USB devices may not be  
attached properly or the connection might be loose.  
• When connecting a USB mass storage class device,  
refer also to its instructions.  
• Connecting condition may vary depending on the  
circumstances around you.  
• When the unit is turned off, the device is  
disconnected.  
• Connect one USB mass storage class device to the unit  
at a time. Do not use a USB hub.  
• This unit is compatible with the USB Full-Speed.  
• If the connected USB device does not have the correct  
files, “No File” appears.  
appears when the connection is established.  
Appears when the Bluetooth phone is  
connected.  
Appears when the Bluetooth audio player  
is connected.  
• This unit can play back MP3 files recorded in VBR  
(variable bit rate).  
Appears when the Bluetooth phone and  
Bluetooth audio player are connected.  
• The maximum number of characters for folder and  
file names is 25 characters; 128 characters for MP3/  
WAV and 64 characters for WMA Tag information.  
• This unit can recognize a total of 5 000 files and 250  
folders (999 files per folder).  
Icons for phone types  
These icons indicate the phone type set on the device:  
• The unit cannot recognize a USB mass storage class  
device whose rating is other than 5 V and exceeds  
500 mA.  
• USB devices equipped with special functions such as  
data security functions cannot be used with the unit.  
• Do not use a USB device with 2 or more partitions.  
• This unit may not recognized a USB device connected  
through a USB card reader.  
:
:
:
Cellular phone  
Household phone  
Office  
:
:
:
General  
Other than above  
Unknown  
Warning messages for Bluetooth operations  
Connection Error:  
The device is registered but the connection has failed.  
Use “Connect” to connect the device again. (See  
page 27.)  
• This unit may not play back files in a USB device  
properly when using a USB extension cord.  
• This unit cannot assure proper functions or supply  
power to all types of USB devices.  
Error  
• For MPEG1/2 files: The maximum bit rate for video  
signals (average) is 2 Mbps.  
Try the operation again. If “Error” appears again,  
check if the device supports the function you have  
tried.  
Device not found  
No available Bluetooth device is detected by  
“Search...”.  
Loading...  
The unit is updating the phone book and/or text  
messages.  
Bluetooth operations  
General  
• While driving, do not perform complicated operation  
such as dialing the numbers, using phone book, etc.  
Stop your car in a safe place before you perform these  
operations.  
• Some Bluetooth devices may not be connected to  
this unit depending on the Bluetooth version of the  
device.  
• This unit may not work for some Bluetooth devices.  
52  
Please Wait...  
The unit is preparing to use the Bluetooth function. If  
• iPod shuffle and iPhone cannot be used with this  
unit.  
the message does not disappear, turn off and turn on  
• You can control the iPod from this unit when “JVC” or  
the unit, then connect the device again (or reset the  
” appears on the iPod display after connection.  
unit).  
Reset 08  
• The song order displayed on the selection menu of  
this unit may differ from that of the iPod.  
• If playback is stopped, select a track from the  
selection menu or press 3/8 (BAND) to play back  
the same track again.  
Check the connection between the adapter and this  
unit.  
• The text information may not be displayed correctly:  
– Some characters such as accented letters cannot be  
shown correctly on the display.  
– Depends on the condition of communication  
between the iPod and the unit.  
• If the text information includes more than  
16 characters, it scrolls on the display. This unit can  
display up to 128 characters.  
iPod  
• Controllable iPod (connected through....):  
(A) KS-PD100:  
– iPod with dock connector (3rd Generation)  
– iPod with click wheel (4th Generation)  
– iPod nano (1st & 2nd*1 Generation)  
– iPod mini (1st Generation)  
– iPod video (5th Generation)*2  
– iPod photo  
(B) USB input jack:  
– iPod nano (1st & 2nd Generation)  
– iPod video (5th Generation)*3  
When you connect the iPod nano to the interface  
adapter, be sure to disconnect the headphones;  
otherwise, no sound is heard.  
It is not possible to browse video files on the “Videos”  
menu while the iPod is connected to the interface  
adapter.  
To watch the video with its audio, connect the iPod  
using USB Audio and Video cable (not supplied).  
• Update your iPod to the latest software version  
before using it with this unit.  
Notice:  
When operating an iPod, some operations may not  
be performed correctly or as intended. In this case,  
visit the following JVC web site:  
co.jp/english/car/>  
– For the inferface adapter connection: <http://  
index.html>  
1
*
*
*
2
3
Title assignment  
• If you try to assign titles to more than 30 station  
frequencies, “Name Full” appears. Delete unwanted  
titles before assignment.  
– You can check the software version of your iPod  
under “About” in the “Setting” menu of the iPod.  
– For details about updating your iPod, visit  
<http://www.apple.com>.  
• While the unit is being turned on, the iPod is charged  
through this unit.  
Continued on the next page  
REFERENCES 53  
General settings—PSM  
• “Auto” setting for “Dimmer” may not work correctly  
on some vehicles, particularly on those having a  
control dial for dimming.  
In this case, change the “Dimmer” setting to any  
other than “Auto.”  
• If “LCD Type” is set to “Auto,” the display pattern  
will change to the “Positive” or “Negative” pattern  
depending on the “Dimmer” setting.  
• If you change the “Amp Gain” setting from  
“High PWR” to “Low PWR” while the volume level is  
set higher than “Volume 30,” the unit automatically  
changes the volume level to “Volume 30.”  
About sounds reproduced through the  
rear terminals  
Through the analog terminals (Speaker out/  
LINE OUT):  
2-channel signal is emitted. When playing a  
multi-channel encoded disc, multi-channel  
signals are downmixed. DTS sound cannot be  
reproduced. (AUDIO—DOWN MIX: see page 46.)  
Through DIGITAL OUT (optical):  
Digital signals (Linear PCM, Dolby Digital, DTS,  
MPEG Audio) are emitted through this terminal.  
(For more details, see table on page 56.)  
To reproduce multi-channel sounds such as  
Dolby Digital, DTS, and MPEG Audio, connect an  
amplifier or a decoder compatible with these  
multi-channel sources to this terminal, and set  
“DIGITAL AUDIO OUTPUT” correctly. (See page 46.)  
About Dual Zone:  
Disc setup menu  
• When the language you have selected is not recorded  
on a disc, the original language is automatically used  
as the initial language. In addition, for some discs,  
the initial languages settings will not work as you set  
due to their internal disc programming.  
• When you select “16:9” for a picture whose aspect  
ratio is 4:3, the picture slightly changes due to the  
process for converting the picture width.  
Through the 2nd AUDIO OUT, 2-channel signal is  
emitted. When playing a multi-channel encoded  
disc, multi-channel signals are downmixed. (See  
page 25.)  
• Even if “4:3 PAN SCAN” is selected, the screen size  
may become “4:3 LETTERBOX” for some discs.  
Adjustable sound elements  
Range/selectable items  
Sound elements  
Frequency  
Band 1  
(100 Hz)  
Band 2  
(320 Hz)  
Band 3  
(1 kHz)  
Band 4  
(3.2 kHz)  
Band 5  
(10 kHz)  
68 Hz  
210 Hz  
680 Hz  
2.1 kHz  
6.8 kHz  
100 Hz  
150 Hz  
320 kHz  
460 kHz  
1 kHz  
1.5 kHz  
3.2 kHz  
4.6 kHz  
10 kHz  
15 kHz  
Level  
–6 to +6  
–6 to +6  
–6 to +6  
–6 to +6  
–6 to +6  
Q (Q-slope)  
Q0.7  
Q1.0  
Q1.4  
Q2.0  
Q0.7  
Q1.0  
Q1.4  
Q2.0  
Q0.7  
Q1.0  
Q1.4  
Q2.0  
Q0.7  
Q1.0  
Q1.4  
Q2.0  
Q0.7  
Q1.0  
Q1.4  
Q2.0  
54  
On-screen guide icons  
During playback, the following guide icons may appear for a while on the monitor.  
:
:
:
:
:
:
Playback  
Pause  
DVD-Video/VCD: Forward slow motion  
DVD-Video: Reverse slow motion  
Forward search  
Reverse search  
DVD: The following icons appear at the beginning of a scene containing:  
:
:
:
Multi-subtitle languages  
Multi-audio languages  
Multi-angle views  
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
• “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.  
• “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other  
countries.  
• DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.  
• Official DivX® Ultra Certified product  
• Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX®  
Media Format  
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the  
United States and/or other countries.  
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor  
Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective  
owners.  
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.  
• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual  
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended  
for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or  
disassembly is prohibited.  
Continued on the next page  
REFERENCES 55  
Output signals through the DIGITAL OUT terminal  
Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see  
page 46).  
Output Signal  
Playback Disc  
STREAM/PCM  
DOLBY DIGITAL/  
PCM  
PCM ONLY  
OFF  
DVD-Video 48 kHz, 16/20/24 bits  
48 kHz, 16 bits stereo Linear PCM *  
Linear PCM  
96 kHz Linear PCM  
Dolby Digital  
48 kHz, 16 bits stereo Linear PCM  
48 kHz, 16 bits  
stereo Linear PCM  
Dolby Digital bitstream  
DTS  
MPEG Audio  
DTS bitstream  
48 kHz, 16 bits stereo Linear PCM  
48 kHz, 16 bits stereo Linear PCM  
MPEG bitstream  
Audio CD, Video CD  
44.1 kHz, 16 bits stereo Linear PCM /  
48 kHz, 16 bits stereo Linear PCM  
DTS bitstream 48 kHz, 16 bits stereo Linear PCM  
OFF  
Audio CD with DTS  
DivX/  
MPEG  
Dolby Digital  
48 kHz, 16 bits  
stereo Linear PCM  
Dolby Digital bitstream  
MPEG Audio  
32/44.1/48 kHz, 16 bits Linear PCM  
32/44.1/48 kHz, 16 bits Linear PCM  
44.1 kHz, 16 bits stereo Linear PCM  
MP3/WMA  
WAV  
* Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the  
discs are not copy-protected.  
56  
Language codes  
Code Language  
AA Afar  
Code Language  
FA Persian  
FI Finnish  
FJ Fiji  
Code Language  
KK Kazakh  
Code Language  
NO Norwegian  
OC Occitan  
Code Language  
ST Sesotho  
AB Abkhazian  
AF Afrikaans  
AM Ameharic  
AR Arabic  
KL Greenlandic  
KM Cambodian  
KN Kannada  
SU Sundanese  
OM (Afan) Oromo SW Swahili  
FO Faroese  
FY Frisian  
GA Irish  
OR Oriya  
TA Tamil  
TE Telugu  
TG Tajik  
KO Korean (KOR)PA Panjabi  
AS Assamese  
AY Aymara  
AZ Azerbaijani  
BA Bashkir  
KS Kashmiri  
KU Kurdish  
KY Kirghiz  
LA Latin  
PL Polish  
GD Scots Gaelic  
GL Galician  
GN Guarani  
PS Pashto, Pushto TH Thai  
QU Quechua  
TI Tigrinya  
RM Rhaeto-  
Romance  
TK Turkmen  
BE Byelorussian GU Gujarati  
LN Lingala  
RN Kirundi  
TL Tagalog  
BG Bulgarian  
BH Bihari  
HA Hausa  
HI Hindi  
LO Laothian  
LT Lithuanian  
RO Rumanian  
TN Setswana  
RW Kinyarwanda TO Tonga  
BI Bislama  
HR Croatian  
LV Latvian, Lettish SA Sanskrit  
TR Turkish  
TS Tsonga  
TT Tatar  
BN Bengali, Bangla HU Hungarian  
MG Malagasy  
MI Maori  
SD Sindhi  
SG Sangho  
BO Tibetan  
BR Breton  
CA Catalan  
CO Corsican  
CS Czech  
HY Armenian  
IA Interlingua  
IE Interlingue  
IK Inupiak  
MK Macedonian SH Serbo-Croatian TW Twi  
ML Malayalam  
MN Mongolian  
MO Moldavian  
MR Marathi  
SI Singhalese  
SK Slovak  
UK Ukrainian  
UR Urdu  
IN Indonesian  
IS Icelandic  
IW Hebrew  
SL Slovenian  
SM Samoan  
UZ Uzbek  
VI Vietnamese  
VO Volapuk  
WO Wolof  
XH Xhosa  
YO Yoruba  
ZU Zulu  
CY Welsh  
DZ Bhutani  
EL Greek  
MS Malay (MAY)SN Shona  
JA Japanese  
MT Maltese  
MY Burmese  
NA Nauru  
NE Nepali  
SO Somali  
SQ Albanian  
SR Serbian  
SS Siswati  
EO Esperanto  
ET Estonian  
EU Basque  
JI  
Yiddish  
JW Javanese  
KA Georgian  
REFERENCES 57  
Troubleshooting  
What appears to be trouble is not always serious. Check the following points before calling a service center.  
Symptom  
Remedy/Cause  
• Sound cannot be heard from the speakers.  
• Adjust the volume to the optimum level.  
• Check the cords and connections.  
• The unit does not work at all.  
Reset the unit (see page 3).  
• “Connect Error” appears on the display.  
Remove the control panel, wipe the connector, then  
attach it again (see page 4).  
• SSM automatic presetting does not work.  
• Static noise while listening to the radio.  
• Disc cannot be played back.  
Store stations manually.  
Connect the antenna firmly.  
Insert the disc correctly.  
• Disc can be neither played back nor ejected. • Unlock the disc (see page 14).  
• Eject the disc forcibly (see page 3).  
• Recordable/Rewritable discs cannot be  
played back.  
• Tracks on the Recordable/Rewritable discs  
cannot be skipped.  
• Insert a finalized disc.  
• Finalize the discs with the component which you  
have used for recording.  
• Disc cannot be recognized.  
Eject the disc forcibly (see page 3).  
• Sound and pictures are sometimes  
interrupted or distorted.  
• Stop playback while driving on rough roads.  
• Change the disc.  
• Check the cords and connections.  
• No playback picture (DVD-Video/DivX/MPEG/ Parking brake wire is not connected properly. (See  
VCD) appears on the monitor.  
Installation/Connection Manual.)  
• No picture appears on the monitor at all.  
• Connect the video cord correctly.  
• Select a correct input on the monitor.  
• The monitor shows black and white wavy  
pictures (DVD-Video/DivX/MPEG/VCD).  
Select an appropriate video format (PAL/NTSC) for your  
monitor (see page 41).  
• The left and right edges of the picture are  
missing on the monitor.  
Select “4:3 LETTERBOX” (see page 45).  
58  
Symptom  
Remedy/Cause  
• Change the disc.  
• Disc cannot be played back.  
• Record the tracks using a compliant application in  
the appropriate discs (see page 6).  
• Add the extension code <.divx>, <.div>, <.avi>,  
<.mpg>, <.mpeg>, <.mp3>, <.wma>, or  
<.wav> to the file names.  
• Noise is generated.  
Skip to another track or change the disc.  
• Tracks cannot play back as you have intended Playback order is determined when files are recorded.  
them to play.  
• Longer readout time is required (“Reading” Readout time varies due to the complexity of the  
keeps flashing on the display).  
folder/file configuration. Do not use too many  
hierarchies and folders.  
• No sound can be heard when picture is  
displayed while playing a DivX/MPEG Video  
file.  
• Record the audio track using MP3 or Dolby Digital as  
the audio stream of DivX files.  
• Record the audio track using MPEG1 Audio Layer 2 as  
the audio stream for MPEG Video files.  
• Elapsed playing time is not correct.  
This sometimes occurs during playback. This is caused  
by how the tracks are recorded.  
• “Please Eject” appears on the display.  
Insert a disc that contains tracks of appropriate formats.  
• Correct characters are not displayed (e.g.  
album name).  
This unit can only display letters (capital: A – Z,  
small: a – z), numbers, and a limited number of  
symbols (see page 48).  
• Noise is generated.  
• The track played back is not a playable file format  
(MP3/WMA/WAV). Skip to another file.  
• Do not add the extension code <.mp3>, <.wma>,  
or <.wav> to non-MP3/WMA/WAV tracks.  
• Tracks cannot play back as you have intended Playback order may differs from the one played back  
them to play.  
using other players.  
• “Reading” keeps flashing on the display.  
• Readout time varies depending on the USB device.  
• Do not use too many hierarchy, folders and empty  
folders.*  
• Turn off the power then on again.  
• Do not pull out or connect the USB device repeatedly  
while “Reading” is displayed on the display.  
* Folder that is phisically empty or folder that contains  
data but does not contain valid MP3/WMA/WAV track.  
Continued on the next page  
REFERENCES 59  
Symptom  
Remedy/Cause  
• “No File” flashes on the display.  
• “No USB” appears on the display.  
Connect a USB device that contains tracks encoded in an  
appropriate format.  
• “Not Support” appears on the display and The track is unplayable.  
track skips.  
• “Read failed” appears on the display.  
The connected USB device may be malfunctioning,  
or may not have been formatted correctly. The files  
included in the USB device are corrupted.  
• Correct characters are not displayed (e.g.  
album name).  
For available characters, see page 48.  
• While playing a track, sound is sometimes The tracks have not been properly copied into the USB  
interrupted.  
device. Copy tracks again into the USB device, and try  
again.  
• The sound is interrupted or skipped during • Turn off, then turn on the unit.  
playback of a USB device. • Connect the device again, when the sound is not yet  
restored.  
• Bluetooth device does not detect the unit. The unit can be connected with one Bluetooth cellular  
phone and one Bluetooth audio device at a time.  
While connecting a device, this unit cannot be detected  
from another device. Disconnect currently connected  
device and search again.  
• The unit does not detect the Bluetooth  
device.  
• Check the Bluetooth setting of the device.  
• Search from the Bluetooth device. After the device  
detects the unit, select “Open...” on the unit to connect  
the device. (See page 26.)  
• The unit does not make pairing with the  
Bluetooth device.  
• Enter the same PIN code for both the unit and target  
device.  
• Select the device name from “Special,” then try to  
connect again. (See page 27.)  
• Phone sound quality is poor.  
• Reduce the distance between the unit and the  
Bluetooth cellular phone.  
• Move the car to a place where you can get a better  
signal reception.  
60  
Symptom  
Remedy/Cause  
• The sound is interrupted or skipped during • Reduce the distance between the unit and the  
playback of a Bluetooth audio player.  
Bluetooth audio player.  
• Turn off, then turn on the unit.  
• When the sound is not yet restored: Connect the player  
again.  
• The connected audio player cannot be  
controlled.  
Check whether the connected audio player supports  
AVRCP (Audio Video Remote Control Profile).  
(Operations depend on the connected audio player.)  
• “No Disc” appears on the display.  
• “No Magazine” appears on the display.  
• “Reset 08” appears on the display.  
Insert a disc into the magazine.  
Insert the magazine.  
Connect this unit and the CD changer correctly and press  
the reset button of the CD changer.  
• “Reset 01” – “Reset 07” appears on the  
display.  
Press the reset button of the CD changer.  
• The CD changer does not work at all.  
Reset the unit (see page 3).  
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.  
• Update the firmware version.  
• Charge the battery.  
• The sound is distorted.  
Deactivate the equalizer either on this unit or the iPod.  
• “Disconnect” appears on the display.  
• Check the connecting cable and its connection.  
• Charge the battery.  
• Playback stops.  
The headphones are disconnected during playback.  
Restart the playback operation (see pages 32 and 33).  
• No sound can be heard when connecting an • Disconnect the headphones from the iPod nano.  
iPod nano.  
• Update the firmware version of the iPod nano.  
• “No File” appears on the display.  
No tracks are stored. Import tracks to the iPod.  
• “Reset 01” – “Reset 07” appears on the  
display.  
Disconnect the adapter from both this unit and iPod.  
Then, connect it again.  
• “Reset 08” appears on the display.  
Check the connection between the adapter and this unit.  
Reset the iPod.  
• The iPod’s controls do not work after  
disconnecting from this unit.  
REFERENCES 61  
Specifications  
Maximum Power  
Output:  
Front/Rear:  
Front/Rear:  
50 W per channel  
Continuous Power  
Output (RMS):  
19 W per channel into 4 Ω, 40 Hz  
to 20 000 Hz at no more than 0.8%  
total harmonic distortion  
Load Impedance:  
4 Ω (4 Ω to 8 Ω allowance)  
Equalizer Control  
Range:  
Frequency:  
Band 1: 68 Hz, 100 Hz, 150 Hz  
Band 2: 210 Hz, 320 Hz, 460 Hz  
Band 3: 680 Hz, 1 kHz, 1.5 kHz  
Band 4: 2.1 kHz, 3.2 kHz, 4.6 kHz  
Band 5: 6.8 kHz, 10 kHz, 15 kHz  
Level:  
10 dB  
Signal to Noise Ratio:  
Audio Output Level:  
80 dB  
Digital (DIGITAL OUT: Optical):  
Signal wave length: 660 nm  
Output level: –21 dBm to –15 dBm  
2.5 V/20 kΩ load (full scale)  
1 kΩ  
Line-Out Level/Impedance:  
Output Impedance:  
Subwoofer-out Level/Impedance:  
2.5 V/20 kΩ load (full scale)  
PAL/NTSC  
Color system:  
Video Output (composite):  
Other Terminal:  
1 Vp-p/75 Ω  
CD changer, AV-IN (video) input jack, USB input jack, Antenna input, 2nd AUDIO  
OUT, LINE IN  
Frequency Range:  
FM Tuner:  
FM:  
87.5 MHz to 108.0 MHz  
531 kHz to 1 602 kHz  
11.3 dBf (1.0 μV/75 Ω)  
16.3 dBf (1.8 μV/75 Ω)  
65 dB  
AM:  
Usable Sensitivity:  
50 dB Quieting Sensitivity:  
Alternate Channel Selectivity (400 kHz):  
Frequency Response:  
Stereo Separation:  
Sensitivity:  
40 Hz to 15 000 Hz  
30 dB  
AM Tuner:  
20 μV  
Selectivity:  
35 dB  
62  
Signal Detection System: Non-contact optical pickup (semiconductor laser)  
Number of Channels:  
Frequency Response:  
2 channels (stereo)  
DVD, fs=48 kHz/96 kHz:  
CD, fs=44.1 kHz:  
16 Hz to 22 000 Hz  
16 Hz to 20 000 Hz  
96 dB/98 dB  
Dynamic Range/Signal-to-Noise Ratio:  
Wow and Flutter:  
Less than measurable limit  
DivX/MPEG  
Video:  
Video: Max. Resolution:  
720 × 480 pixels (30 fps)  
720 × 576 pixels (25 fps)  
Audio: Bit Rate:  
DivX: 32 kbps – 320 kbps  
MPEG Video: 32 kbps – 320 kbps  
Sampling Frequency: DivX:  
MPEG-1: 32 kHz, 44.1 kHz, 48 kHz  
MPEG-2: 16 kHz, 22.05 kHz, 24 kHz  
Sampling Frequency: MPEG Video: 32 kHz, 44.1 kHz, 48 kHz  
MP3:  
Bit Rate:  
32 kbps – 320 kbps  
Sampling Frequency:  
MPEG-1: 32 kHz, 44.1 kHz, 48 kHz  
MPEG-2: 16 kHz, 22.05 kHz, 24 kHz  
WMA:  
WAV:  
Bit Rate:  
32 kbps – 320 kbps  
Sampling Frequency:  
Quantization Bit Rate:  
Sampling Frequency:  
22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz  
16 bit  
44.1 kHz  
USB Standards:  
USB 1.1, USB 2.0  
Full Speed:  
Data Transfer Rate:  
Maximum 12 Mbps  
Maximum 1.5 Mbps  
Mass storage class  
Low Speed:  
Compatible Device:  
Compatible File System:  
Playable Audio Format:  
Max. Current:  
FAT 32/16/12  
DivX/MPEG1/MPEG2/MP3/WMA/WAV  
500 mA/5 V  
Power Requirement:  
Grounding System:  
Operating Voltage:  
DC 14.4 V (11 V to 16 V allowance)  
Negative ground  
Allowable Operating Temperature:  
0°C to +40°C  
Dimensions  
(W × H × D):  
Installation Size (approx.):  
Panel Size (approx.):  
182 mm × 52 mm × 159 mm  
188 mm × 58 mm × 6 mm  
1.5 kg (excluding accessories)  
Mass (approx.):  
Design and specifications are subject to change without notice.  
REFERENCES 63  
Having TROUBLE with operation?  
Please reset your unit  
Refer to page of How to reset your unit  
EN  
© 2008 Victor Company of Japan, Limited  
0108DTSMDTJEIN  

Alpine CDE 7872 User Manual
American Dynamics Camera Lens LD1214CS User Manual
Asus Car Video System VW193 User Manual
Black Decker FX350 User Manual
Fender PD 150 User Manual
Hitachi DZ HS503 User Manual
HP (Hewlett Packard) Hewlett Packard Car Video System LA22F User Manual
JVC CH X100 User Manual
JVC GR DV3000 User Manual
JVC GR DVL310A User Manual