P452/552/652/953 OM 1/27/03 3:36 PM Page 1
m u lt ie le m e n t s
o w n e r ’s m a n u a l
T H A N K Y O U
for purchasing JBL Power Series®
automotive speakers. We’ve organized
this manual to make your installation
as simple and trouble-free as possible.
Please read it thoroughly before proceeding.
Remember to keep your sales receipt and this manual
in a safe place so both are available for future reference.
P452/552/652/953 OM 1/27/03 3:36 PM Page 3
IN S TA LLA T IO N
Figure 3. Mounting the P8652 and P6452.
Figure 4. Mounting the P652 and P652s using the
supplied grilles.
Figure 6. Mounting the P652 and P652s in
standard speaker locations.
Figure 7.
Connecting an in-line crossover to a P652 and
an amplifier output. Other speaker models are
connected in a similar way.
NOTE:The P6452 and P8652 speakers are
designed to be installed under factory grilles.
Consequently, no grilles are packaged with
these Power Series m odels.
NOTE: The positions shown here for the
polarities m ay not resem ble the exact
connections in every installation. However,
in every case, the larger term inal is the
positive (+) connection.
Tweeter
terminals
on top
Yellow
Green
Rotate tweeter so it is angled
toward the listener using the
UniPivot™ (patent no. 6,002,780)
feature on the P552, P652 and P8652.
NOTE: The P652 and P652s use an adapter to
fit a variety of different 6" openings. Select
an appropriate adapter ring and secure it to
the vehicle using the sheet-m etal screws
provided, then attach the speaker to the ring
with the m achine screws.
Figure 3a.
Figure 5.
Mounting the P652 and P652s in 165mm speaker
locations.
Woofer
terminals
on bottom
White
Blue
Red
Black
P452/552/652/953 OM 1/27/03 3:36 PM Page 4
S P E C IF IC A T IO N S
P452
P552
P652
P652s
P953
P6452
P8652
Type:
4" two-way
5-1/4" two-way
6-1/2" two-way
6-1/2" shallow-mount
two-way
6" x 9" three-way
4" x 6" two-way
6" x 8" (and 5" x 7")
two-way
Speaker
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
Impedance:
Power
Handling:
50W RMS,
150W Peak
55W RMS,
165W Peak
75W RMS,
225W Peak
55W RMS,
165W Peak
110W RMS,
330W Peak
50W RMS,
150W Peak
75W RMS,
225W Peak
Sensitivity
(2.83V, 1m):
89dB
89dB
90dB
90dB
90dB
89dB
90dB
Frequency
Response:
75Hz – 23kHz
2" (51mm)
3-1/2" (89mm)
55Hz – 23kHz
2-3/16" (56mm)
4-11/16" (120mm)
45Hz – 23kHz
2-1/4" (58mm)
5-1/16" (129mm)
55Hz – 23kHz
1-15/16" (50mm)
5-1/16" (129mm)
35Hz – 23kHz
3-5/16" (85mm)
75Hz – 23kHz
2-1/16" (53mm)
40Hz – 23kHz
2-7/16" (62mm)
Mounting
Depth:
Cut-Out
Diameter:
8-11/16" x 5-7/8"
(221mm x 150mm)
5-5/8" x 4"
(143mm x 102mm)
7-3/16" x 4-15/16"
(183mm x 126mm)
GENERAL CARE
The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones.
A valid serial number is required for warranty coverage.
Features, specifications and appearance are subject to change without notice.
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
JBL Consumer Products
declare in own responsibility that the products
described in this owner’s manual are in compliance
with technical standards:
250 Crossways Park Drive, Woodbury, NY 11797 USA
© 2003 Harman International Industries, Incorporated
EN 50081-1:1992
EN 50082-1:1997
JBL is a registered trademark of
Harman International Industries, Incorporated.
Emmanuel Millot
Harman Consumer International
Chateau-du-Loir, France. 2/03
Part No. POWERMEOM2/03
|