Insignia NS WBRDVD2 CA User Manual

User Guide  
Wireless Blu-Ray Disc Player  
NS-WBRDVD2/NS-WBRDVD2-CA  
Contents  
Storing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Resetting your player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
TV screen and video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
BD-Live and USB connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Internet and USB connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Other playback problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
System and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Video file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
MP3/WMA audio file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . 26  
Photo file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
iii  
Contents  
iv  
9 Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If  
the provided plug does not fit into your outlet,  
consult an electrician for replacement of the  
obsolete outlet.  
10 Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lightning flash with arrowhead symbol within an equilateral  
triangle is intended to alert you to the presence of uninsulated  
dangerous voltage within your player’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric shock to  
persons.  
The exclamation point within an equilateral triangle is intended  
to alert you to the presence of important operating and  
maintenance (servicing) instructions in the literature that came  
with your player.  
11 Only use attachments/accessories specified by  
the manufacturer.  
12 Use only with the cart, stand,  
tripod, bracket, or table specified  
by the manufacturer, or sold with  
the apparatus. When a cart is used,  
use caution when moving the  
cart/apparatus combination to  
avoid injury from tip-over.  
This symbol is the symbol for CLASS II (Double Insulation).  
13 Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
Warning  
14 Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as  
Your player employs a laser system.  
Use of controls, adjustments, or the  
performance of procedures other  
than those specified may result in  
hazardous radiation exposure.  
Visible laser radiation is present when open and  
interlocks defeated. Do not stare into the beam.  
power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or  
has been dropped.  
Disposal of your old appliance  
15 To reduce the risk of fire or electric shock, do not  
expose this device to rain, moisture, dripping, or  
splashing, and no objects filled with liquids,  
such as vases, shall be placed on it.  
16 An apparatus with a three-prong,  
grounding-type plug is a Class I apparatus,  
which needs to be grounded to prevent  
possible electric shock. Make sure that you  
connect this Class I device to a grounding-type,  
three-prong outlet.  
1. When this crossed-out wheeled bin symbol is attached to a  
product, it means the product is covered by the European  
Directive 2002/96/EC.  
2. All electrical and electronic products should be disposed of  
separately from the municipal waste stream via designated  
collection facilities appointed by the government or the local  
authorities.  
3. The correct disposal of your old appliance will help prevent  
potential negative consequences for the environment and  
human health.  
4. For more detailed information about disposal of your old  
appliance, please contact your city office, waste disposal service,  
or the shop where you purchased the product.  
17 The wall plug is the disconnecting device. The  
plug must remain readily operable.  
18 Keep a minimum distance of 4 inches (10cm)  
around the apparatus for sufficient ventilation.  
19 Do not install this equipment in a confined  
space such as book case or similar unit. The  
ventilation should not be impeded by covering  
the ventilation openings with items such as  
newspaper, table-cloths, or curtains.  
Important safety  
instructions  
1 Read these instructions.  
20 Batteries should not be exposed to excessive  
heat such as sunshine, fire, or the like.  
2 Keep these instructions.  
3 Heed all warnings.  
Caution  
Danger of explosion if battery is incorrectly replaced. Replace  
only with the same or equivalent type.  
4 Follow all instructions.  
5 Do not use this apparatus near water.  
6 Clean only with a dry cloth.  
7 Do not block any ventilation openings. Install in  
accordance with the manufacturer's  
instructions.  
8 Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
1
 
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
Wireless Blu-ray Disc Player  
Notes  
Introduction  
Writeable DVD discs (DVD-RW, DVD-R) must be  
finalized, VR-mode only.  
Playback may not work for some types of discs,  
or when specific operations, such as angle  
change and aspect ratio adjustment, are being  
performed. Information about the disc is written  
in detail on the box.  
Do not allow the disc to become dirty or  
scratched. Fingerprints, dirt, dust, scratches, or  
deposits of cigarette smoke on the recording  
surface may make it impossible to use the disc  
for playback.  
Congratulations on your purchase of a high-quality  
Insignia product. Your NS-WBRDVD2 or  
NS-WBRDVD2-CA represents the state of the art in  
Blu-ray Disc player design and is designed for  
reliable and trouble-free performance.  
Features  
• Full high-definition video playback at up to 1080p  
resolution for an amazing viewing experience.  
CD-R/-RW, DVD-RW/-R recorded with UDF or  
ISO9660 format can be played back.  
Windows Media Audio (WMA) files must be  
written to the disc with a .wma file extension in  
order to be recognized and played back  
correctly.  
JPEG picture files must be written to the disc  
with a .jpeg or .jpg file extension in order to be  
recognized and played back correctly.  
• Upconversion of standard definition DVDs for  
enhanced picture quality at up to 1080p over an  
HDMI connection.  
• Rich multi-channel surround sound.  
• Easy and simple HDTV connection using a single  
HDMI cable (cable not included).  
• Multiple outputs for connecting your home  
theater system or amplifier.  
About Blu-ray Discs  
• PIP functionality that lets you display primary and  
secondary video at the same time (if available on  
the Blu-ray Disc).  
• Pop-up menu display without interrupting  
playback (if available on the Blu-ray Disc).  
• HDMI 1080p/fps output (Blu-ray Disc only) that  
provides smooth playback of video with a frame  
rate of 60 frames per second (TV must be  
connected with an HDMI cable and be compatible  
with 1080p 60 frame).  
The massive storage capacity of a Blu-ray Disc  
allows a higher standard of picture and audio  
quality and a wealth of special effects and  
enhanced features not available on DVDs.  
Java  
Package contents  
Your player features Java support so you can get the  
most out of the latest Blu-ray Discs. When a Blu-ray  
Disc loads, explore the title menu to enjoy such as  
interactive menus and BD-Live.  
• Blu-ray Disc player  
• Remote control  
• AAA batteries (2)  
• User Guide  
HDMI  
HDMI is the only domestic medium capable of  
transmitting the huge volumes of data required by  
the high picture resolutions and advanced digital  
audio codecs that make Blu-ray such an exciting  
medium.  
• Quick Setup Guide  
Playable discs  
Disc type  
Logo  
Disc type  
Logo  
Blu-ray Disc  
CD-R  
Playing Blu-ray Discs  
Playing Blu-ray Discs are a lot like playing DVDs,  
DVD-video  
(DVD-ROM)  
Audio CDs (CDDA)  
CD-RW  
except Blu-ray Discs have a higher level of  
interactivity.  
Most of the standard features of DVD playback work  
the same with Blu-ray Disc playback. The two most  
common exceptions are:  
DVD-RW  
DVD+RW  
MP3  
Resume play—Not available on Blu-ray discs  
A-B repeat (playback loop)—Not available on  
DVD-R  
MPEG4  
JPEG  
some Blu-ray Discs  
Color buttons  
DVD+R  
The red, green, yellow, and blue buttons on the  
remote control are used with interactive menus  
when operating a Blu-ray Disc that includes BD-Live  
applications. For more information about using this  
kind of disc, see the instructions that came with the  
disc.  
2
         
Wireless Blu-ray Disc Player  
Front  
Remote control  
#
Item  
Description  
Insert a disc with the label side up into this tray. To  
open or close the tray, press (open/close).  
1
2
3
4
Disc tray  
Displays information about disc playback.  
Receives signals from the remote control. Do not block.  
Press to open or close the disc tray.  
Display screen  
Remote control sensor  
(open/close)  
Press to start or pause playback.  
5
(play/pause)  
Press to stop playback.  
To resume playback, press  
or to select  
DVD/BD-ROM, then press ENTER. Depending on the  
disc, playback starts where it stopped or at the  
beginning of the disc.  
6
(stop)  
If you press (stop) twice, playback stops  
completely. To start playback again, press  
(play/pause).  
Press to go to the previous title, chapter, or track.  
7
8
(previous)  
(next)  
Press to go to the next title, chapter, or track.  
Press to turn on your player or put your player in  
standby mode. When your player is in standby mode,  
power is still entering your player. To disconnect  
power, unplug the power cord.  
9
(standby/on)  
USB port  
Plug a USB flash drive into this port.  
10  
#
Item  
Description  
Press to turn on your player or put your player in  
standby mode. When your player is in standby mode,  
power is still entering your player. To disconnect  
power, unplug the power cord.  
1
Back  
STANDBY/ON  
In playback mode, press SEARCH, then press the  
number buttons to enter a title, chapter, track, or time.  
2
3
Number buttons  
SEARCH  
In menu mode, press to enter numbers.  
Press to search for a title, chapter, or specific time on a  
disc. For more information, see “Searching for a title,  
chapter, or elapsed time” on page 11.  
Press to fast reverse. Each time you press this button,  
the fast-reverse speed decreases from Fast x 2,  
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,  
#
Item  
Description  
Plug the power cord into a power outlet.  
1
Power connector  
4
(fast reverse)  
Fast x 128. Press  
playback.  
(play/pause) to resume normal  
Connect an ethernet cable to this jack and to a  
broadband Internet jack to access BD-Live information  
or run connected applications.  
2
ETHERNET jack  
Press to fast forward. Each time you press this button,  
the fast-forward speed increases from Fast x 2,  
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,  
Connect a TV to this jack using an HDMI cable. An  
HDMI cable carries both video and audio.  
3
4
5
6
7
8
9
HDMI OUT  
5
6
(fast forward)  
ZOOM  
Fast x 128. Press  
playback.  
(play/pause) to resume normal  
Connect a TV to this jack and to the AUDIO OUT L/R  
jacks using a composite video cable (provided).  
VIDEO OUT  
Press to zoom in on a video. Each time you press this  
button, the magnification level changes. This button is  
only used for DVD discs or picture files.  
Connect a TV to these jacks and to the AUDIO OUT L/R  
jacks using a component video cable and audio cable.  
COMPONENT VIDEO OUT  
AUDIO OUT L/R  
Connect the audio for a composite TV or component  
video TV to these jacks.  
Press to stop playback.  
To resume playback, press  
or to select  
Connect an optical digital amplifier to this jack to play  
the sound through the amplifier’s speakers.  
DVD/BD-ROM, then press ENTER. Depending on the  
disc, playback starts where it stopped or at the  
beginning of the disc.  
OPTICAL DIGITAL OUT  
COAXIAL DIGITAL OUT  
WIFI antenna  
7
Connect a coaxial digital amplifier to this jack to play  
the sound through the amplifier’s speakers.  
(stop)  
If you press (stop) twice, playback stops  
completely. To start playback again, press  
Connects the player wirelessly to your wireless  
network.  
(play/pause).  
3
     
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
#
Item  
Description  
Press to repeat the current title, chapter, track, or  
repeat all. For more information, see “Repeating a  
title, chapter, or CD track” on page 11.  
Setting up your player  
8
REPEAT  
Installing remote control batteries  
Press to select the video resolution. For more  
information, see “Selecting the video output  
resolution” on page 13.  
To install remote control batteries:  
1 Remove the battery compartment cover.  
9
RESOLUTION  
A-B  
Press to create a playback loop. For more information,  
see “Creating a playback loop on a DVD or audio CD”  
on page 11.  
10  
During DVD playback, press to open the DVD root  
menu where you can select DVD playback options.  
(This button is valid for DVDs that have a multi-layer  
menu.)  
11  
DISC MENU  
If a disc menu opens when playing a Blu-ray Disc or  
DVD, press to select a menu option, then press ENTER.  
12  
13  
14  
During media file browsing, press to select a file on the  
popup menu.  
When a menu is open, press to select an option.  
2 Insert two AAA batteries into the battery  
compartment. Make sure that the + and –  
symbols on the batteries match the + and –  
symbols in the battery compartment.  
Press to confirm selection in a menu.  
ENTER  
Press to stop disc playback and enter home screen.  
When accessing Connected applications such as  
Cinemanow, Pandora, or Netflix, pressing  
HOME/SETUP will stop the application and return you  
to home screen.  
HOME/SETUP  
Press to select a subtitle language or to turn subtitles  
off.  
15  
16  
SUBTITLE  
When playing a Blu-ray Disc that has a Java™  
application, press to control playback. For more  
information, see the documentation that came with  
the Blu-ray Disc.  
A (red), B (green),  
C (yellow), D (blue)  
Press to turn PIP (picture-in-picture) mode on or off.  
For more information, see “Using PIP  
(picture-in-picture) mode” on page 11.  
17  
PIP  
3 Replace the battery compartment cover.  
Press to open or close the disc tray.  
18  
19  
20  
21  
OPEN/CLOSE  
CLEAR  
Press to clear an input error.  
Press to go to the next title, chapter, or track.  
Press to go to the previous title, chapter, or track.  
(next)  
(previous)  
Press to advance one frame at a time. Press  
(play/pause) to resume normal playback.  
22  
23  
(step)  
(play/pause)  
ANGLE  
Press to start or pause playback.  
Notes  
Press to select a viewing angle if multiple angles are  
available on the disc. For more information, see  
“Selecting a viewing angle” on page 11.  
Make sure that you insert the batteries correctly.  
Do not heat, open, or short-circuit batteries.  
Do not throw batteries into a fire.  
Do not mix different types of batteries or mix  
old and new batteries.  
24  
25  
DISPLAY  
Press to display disc information.  
During Blu-ray Disc playback, press to open a menu  
that lets you control Blu-ray Disc playback.  
During DVD playback, press to open the DVD menu (if  
available). For more information, see “Using a disc  
popup menu” on page 11.  
Do not try to recharge non-rechargable  
batteries.  
If the remote control does not function correctly  
or if the operating range becomes reduced,  
replace the batteries.  
POPUP MENU/  
TITLE MENU  
26  
27  
28  
RETURN  
AUDIO  
Press to return to the previous menu.  
Press to select the audio mode. For more information,  
see “Selecting the audio mode” on page 11.  
In PIP mode, press to turn the audio for the secondary  
video on or off. For more information, see “Using PIP  
(picture-in-picture) mode” on page 11.  
29  
SECONDARY AUDIO  
4
   
Wireless Blu-ray Disc Player  
Connecting a TV using an HDMI cable (best)  
Connecting a TV using an A/V cable (good)  
To connect a TV using an HDMI cable:  
To connect a TV using an AV cable:  
• Connect an HDMI cable to the HDMI jack on  
the back of your player and to the HDMI IN  
jack on the TV.  
• Connect an A/V cable to the VIDEO OUT and  
AUDIO OUT L/R jacks on the back of your  
player and to the VIDEO IN and AUDIO IN L/R  
jack on the TV. Jacks and cable connectors are  
usually color-coded. Make sure that you match  
the colors.  
TV  
Back of player  
Back of player  
TV  
Yellow=Video  
Notes  
White=Left audio  
Red=Right audio  
Only the HDMI is capable of 1080p video output  
and the highest definition audio codecs.  
An HDMI cable carries both video and audio. If  
you want to use TV speakers, you do not need to  
make an audio connection if you are using an  
HDMI cable. If you want to use an HDMI-capable  
audio receiver, connect an HDMI cable between  
your player and the HDMI input on the receiver.  
Note  
The A/V cable can only send standard-definition  
video (480i) to your TV.  
Connecting audio to an amplifier or home  
theater system  
Connecting a TV using a component video  
cable (better)  
To connect audio to an analog amplifier:  
Note  
• Connect an audio cable to the AUDIO OUT L/R  
jacks on the back of your player and to the AUDIO  
IN L/R jacks on the receiver.  
High definition video (up to 1080i) is supported with  
a component video cable.  
Analog audio receiver  
To connect a TV using component cables:  
1 Connect a component video cable to the  
COMPONENT VIDEO OUT jacks on the back of  
your player and to the COMPONENT VIDEO IN  
jacks on the TV.  
Back of player  
Audio cable  
Audio cable  
Back of player  
TV  
To connect audio to a digital amplifier or home  
theater system:  
• Connect a digital optical cable from the OPTICAL  
DIGITAL OUT jack on the back of your player to  
the OPTICAL DIGITAL IN jack on the receiver.  
- Or -  
Connect a digital coaxial cable from the COAXIAL  
DIGITAL OUT jack on the back of your player to  
the COAXIAL DIGITAL IN jack on the receiver.  
Component video cables  
Home theater system  
2 Connect an audio cable to the AUDIO OUT L/R  
jacks on the back of your player and to the  
AUDIO IN L/R jacks on the TV.  
Back of player  
Connect to the OPTICAL  
DIGITAL OUT jack  
Connect to the COAXIAL DIGITAL OUT jack  
5
       
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
6 Press or to select the wireless network you  
want your player to connect to. A Network Setup  
screen opens with the following options:  
Connecting to your home network  
Note  
This player can be connected to your wired network  
using the Ethernet port on the back of your player or  
by using a wireless network.  
Connect—Connect to this network.  
Disconnect—Disconnect from this network.  
Delete—Delete the current network.  
WPS Pin—Create a random PIN number  
password.  
Connecting using a wireless network  
Another connection option is to use an access point  
or a wireless router as shown in the example below.  
7 If your network does not use encryption, press  
or to select Connect, then press ENTER. If  
the wireless network is working, you should see  
a checkmark and a connected message on the  
TV. If the message does not appear, repeat the  
steps above.  
To connect to the Internet with a wireless  
network:  
1 Set up your access point or wireless router (if not  
already set up).  
OR  
If your network uses encryption:  
Player  
1 Press or to select the Password field, then  
press ENTER. An on-screen keyboard opens.  
2 Press  
password, then press ENTER. Repeat this step to  
enter the rest of the password. If you make a  
mistake, use backspace key to delete the  
character.  
Wireless router  
3 After you enter the password, select the circled  
X in the upper right-hand corner of the  
keyboard, then press ENTER to close the  
keyboard.  
2 Press ENTER. The Settings menu opens.  
4 Press or to select Connect, then press  
ENTER. If the wireless network is working, you  
should see a checkmark and a connected  
message on the TV. If the message does not  
appear, repeat the steps above.  
To connect to a wireless network using Wi-Fi  
Protected Setup (WPS), see “Setting up WiFi  
protection (WPS)” on page 20.  
Connecting using a wired network  
To connect to the ethernet with a wired network:  
1 Connect a network cable to the INTERNET jack  
on the back of your player and into a wired  
router using a commercially available LAN or  
Ethernet cable (Cat 5 or better, with RJ45  
connectors).  
3 Press or to select Network, then press  
ENTER.  
4 Press or to select Wireless, then press  
ENTER. The Wireless Settings screen opens.  
Back of player  
Network cable  
Wired router  
5 Press or to select Network List, then press  
ENTER. The Network List screen opens, showing  
a list of available wireless networks.  
6
 
Wireless Blu-ray Disc Player  
Using a wired network provides the best  
7 Press or to select Network, then press  
performance, because the attached devices  
connect directly to the network and are not  
subject to radio frequency interference.  
ENTER.  
8 Press or to select Wired, then press ENTER.  
The IP Settings screen opens.  
Notes  
When plugging or unplugging the LAN cable,  
hold the plug portion of the cable. When  
unplugging, do not pull on the LAN cable but  
unplug while pressing down on the lock.  
Do not connect a modular phone cable to the  
LAN port.  
Since there are various connection  
configurations, follow the specifications of your  
telecommunication carrier or Internet service  
provider.  
IP Settings  
Link Status  
MAC Address  
IP Mode  
IP Address  
Subnet Mask  
Gateway  
Link Down  
00:22:84:04:96:f1  
Dynamic  
0.0.0.0  
0.0.0.0  
0.0.0.0  
Primary DNS  
Secondary DNS  
0.0.0.0  
0.0.0.0  
2 Press ENTER. The Settings menu opens.  
Apply  
Cancel  
9 Press or to select IP Mode, then press  
ENTER.  
10 Press or to select an IP mode. You can  
select:  
Dynamic—Uses DHCP to automatically  
obtain an IP address.  
Manual—Lets you manually configure  
network settings, such as IP address, subnet  
mask, and gateway settings. If you select  
Manual, the following screen opens. Enter the  
IP information here.  
3 Press or to select Network, then press  
ENTER.  
4 Press or to select Wired, then press ENTER.  
The IP Settings screen opens. If the network  
connection is active, Link Up appears next to  
Link Status. If the network connection is not  
active, Link Down appears next to Link Status.  
Please enter new IP Address  
Valid range of each segment is 0 to 255  
Current value  
New Value  
111.11.11.11  
Cancel  
IP Settings  
OK  
Link Status  
MAC Address  
IP Mode  
IP Address  
Subnet Mask  
Gateway  
Link Down  
00:22:84:04:96:f1  
Dynamic  
0.0.0.0  
Off—Disables the network interface.  
11 Press to go to the previous menu.  
To make changes to your network connection,  
see “Changing the Network settings” on page  
19.  
0.0.0.0  
0.0.0.0  
Primary DNS  
Secondary DNS  
0.0.0.0  
0.0.0.0  
Apply  
Cancel  
5 Press to go to the previous menu.  
6 Press ENTER. The Settings menu opens.  
7
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
Using connected applications for the US  
market  
Using your player  
Note  
Note  
The instructions and support numbers for the  
connected applications apply to the US market only.  
Unless otherwise noted, all tasks in this section are  
based on using the remote control.  
Your player is equipped with the capability to watch  
movies over the Internet (for example, from Netflix  
or CinemaNow), or to listen to Pandora Internet  
radio. Before being able to use these Internet  
services, you must first:  
1. Have connected the player to the Internet, and  
passed the Network Test. See “Configuring a  
wireless Internet connection” on page 20.  
Playing a Blu-ray Disc or DVD  
To play a Blu-ray Disc or DVD:  
1 Press  
.
2 Turn on the TV, then select the input setting on  
the TV that matches the connection method  
you used to connect your player.  
3 Press to open the disc tray.  
2. Have a valid account to these services.  
4 Place a disc on the disc tray with the label facing  
up, then press to close the disc tray. It may  
take a few seconds for the disc to load.  
You should contact the partner company (not  
Insignia) if you experience an issue using one of  
these applications.  
5 If a Blu-ray Disc or DVD menu opens, press  
Watching movies with CinemaNow  
or to select PLAY, then press ENTER.  
To set up your CinemaNow account:  
6 To eject the disc, press  
.
1 First set up your CinemaNow account through  
to get an activation PIN.  
Controlling Blu-ray Disc or DVD playback  
Note  
2 Log in to CinemaNow with your account  
If  
appears on the screen, the current action is not  
information and password.  
permitted by the disc or your player. For example,  
many discs do not let you fast-forward through the  
warning information at the beginning of the disc.  
3 Browse to Activate/Deactivate under the My  
Account section.  
4 Click on Activate a New Device and sign in  
To control Blu-ray Disc or DVD playback:  
again with your user name/password.  
• Press  
(play/pause) to start or pause playback.  
5 Enter any name in the Name Your Device  
The sound is muted when your player is in pause  
mode. To resume normal playback, press  
(play/pause).  
section, then click Continue.  
You now have been provided with a valid  
activation number to enter into the activation  
field within the Cinemanow application on your  
Blu-ray player.  
• Press (stop) to stop playback, press  
(play/pause) to start playback again. Depending  
on the disc, playback starts where it stopped or at  
the beginning of the disc. If you press (stop)  
twice, playback stops completely and playback  
starts at the beginning of the disc when you  
resume playback.  
6 Once you have successfully established an  
internet connection on your Blu-ray player,  
select the Cinemanow application using your  
remote control, then press ENTER.  
• Press  
to fast-forward. Each time you press this  
7 Select the Settings tab at the bottom of the  
button, the fast-forward speed changes in the  
screen, then press ENTER.  
following sequence: Fast x 2, x 4, x 8, x 16, x 32,  
x 64, x 128. Press  
normal playback.  
8 Select Activate and enter your activation code.  
(play/pause) to resume  
You can now rent movies using Cinemanow.  
9 To exit CinemaNow, press Home/Setup.  
• Press  
to fast-reverse. Each time you press this  
button, the fast-reverse speed changes in the  
Watching movies with Netflix  
following sequence: Fast x 2, x 4, x 8, x 16, x 32,  
Once the conditions above have been met, follow  
the steps below to register your player with Netflix,  
which enables it to stream movies from the Internet  
to your TV.  
x 64, x 128. Press  
normal playback.  
(play/pause) to resume  
• Press  
to go to the previous chapter within two  
seconds after the current chapter starts. To go to  
Note  
the beginning of the chapter, press  
any time  
Users must have a valid Netflix account in order to  
stream Netflix movies to this player.  
after the first two seconds of the chapter have  
been played.  
• Press  
• Press  
to go to the next chapter.  
(step) to play one frame at a time. Each  
time you press this button, the video advances  
To watch movies with Netflix:  
1 Select Netflix to register the player with your  
Netflix account. Follow the directions on the  
screen. You will be provided with an activation  
code.  
one frame. Press  
normal playback.  
(play/pause) to resume  
2 If you already have an existing Netflix account,  
log in to your account on your PC. Click on the  
Your Account & Help link in the upper right  
corner of the screen.  
8
       
Wireless Blu-ray Disc Player  
3 In the WATCHING INSTANTLY ON YOUR TV OR  
Setting up your player for BD-Live Internet access  
COMPUTER section, click Activate a Netflix  
Ready Device and enter the activation code  
from Step 1.  
To set your player up for BD-Live Internet Access:  
1 Press ENTER. The Settings menu opens.  
- OR -  
If you do not have an existing Netflix account,  
your free trial and enter the activation code  
from Step 1 into the Insignia code field on  
screen.  
4 After setting up your account and activating  
your Blu-ray player, browse to Instant under the  
Your Queue tab and add movies to queue.  
5 To exit Netflix, press Home/Setup.  
Listening to music with Pandora  
2 Press or to select BD-Live. The BD-Live  
For existing Pandora customers:  
1 Select Pandora.  
2 Select I have a Pandora account from the  
options, then sign in with your account  
information.  
menu opens.  
3 Press or to select BD-Live Internet Access,  
then press ENTER. Make sure that either Limit  
Access or Always Allow Access is checked.  
4 Insert a USB memory stick. The USB stick must  
be at least 1 GB and be formatted as FAT32.  
For new Pandora customers:  
5 If there is not at least 1 GB of free space on your  
player, try to select Clear BD Storage from the  
BD-Live menu.  
1 Select Pandora.  
2 Select I am new to Pandora from the options.  
You will receive an activation code.  
6 Press to go to the previous menu.  
and enter the activation code from Step 2, then  
click Activate.  
7 Press or to select Network, then press  
ENTER.  
8 Configure your Internet connection as  
described in “Configuring a wireless Internet  
connection” on page 20.  
4 Click Create a Pandora Account and follow the  
on-screen instructions.  
5 To exit Pandora, press Home/Setup.  
Note  
To create a new Pandora account using a PC:  
Your player must pass the network test (see “Using  
the network test” on page 21) or you are not  
connected to the Internet and cannot access BD-Live  
content on the web.  
account.  
Using connected applications for the  
Canadian market  
Displaying Blu-ray Disc or DVD information  
To stay up-to-date on future service options, visit  
Note  
The information displayed for discs other than  
Blu-ray Discs will be different.  
Using BD-Live  
To display Blu-ray Disc or DVD information:  
Some BD discs contain additional features that are  
made available to players that are connected to the  
Internet and have an additional USB memory stick  
added.  
These additional features may include things like:  
• The ability to download new movie trailers.  
• Additional commentary by actors and directors.  
• Multiperson game play and chat.  
• Press DISPLAY. Your player displays information  
about the Disc, such as type of disc, current  
elapsed time in title, total amount of time in title,  
current chapter, and total number of chapters.  
• Press DISPLAY again to close the display.  
In order to access BD-Live functions, the player  
must be properly configured for BD-Live Internet  
access and it must be equipped with an additional  
USB memory stick.  
9
     
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
• Select Start Slide Show to view the pictures in  
Playing files on a data disc or USB memory  
stick  
the current folder one by one.  
• Select Settings to set the slide show effects  
and slide show delay time.  
• Select Main Menu to return to the Main menu.  
• To view a single file, select the files from the  
right panel, then press ENTER.  
• Select Previous folder/Media menu to return to  
the previous folder.  
When you insert a data disc or USB memory stick  
containing picture, music, or video files into your  
player, icons are added to the menu to indicate that  
video, music, or picture files are available for  
playback.  
To play audio or video files:  
1 Press or to select Music or Videos, then  
press ENTER. A menu opens.  
Videos  
Settings  
Music  
Pictures  
Viewing photographs  
Your player can display digital photograph files that  
are on a USB memory stick or that have been  
burned onto a CD, DVD+/-R, DVD+/-R/(W), or  
Blu-ray Disc.  
2 Press or to select Play Files, then press  
ENTER. The files in the current folder will be  
played.  
To view photographs:  
1 Insert a disc or a USB memory stick containing  
photographs into your Blu-ray player. The  
following menu opens:  
• If you are playing music files and want to view  
JPG picture files at the same time, press  
RETURN, then press or to select Browse  
Pictures, then press ENTER. Select the JPG  
files you want to view.  
• If you want to see information about the file  
that is playing, press or to select Now  
Playing, then press ENTER. The following  
display appears.  
Videos  
Settings  
File 1/5 song1.mp3  
Title: Cool Track  
Artist: Ricardo Funiccio  
Album: Dead Dux  
Music  
Play  
0:02:00  
0:30:00  
Off  
Off  
Pictures  
Random play indicator  
Repeat indicator  
Play indicator  
2 Press or to select Pictures, then press  
ENTER. The Picture menu opens.  
Playing an audio CD  
To play an audio CD:  
1 Press  
.
2 Press to open the disc tray.  
3 Place a CD on the disc tray with the label facing  
up, then press to close the disc tray. It may  
take a few seconds for the CD to load.  
4 To eject the CD, press  
.
10  
     
Wireless Blu-ray Disc Player  
Controlling audio CD playback  
Using PIP (picture-in-picture) mode  
Some Blu-ray Discs are compatible with  
To control audio CD playback:  
picture-in-picture (PIP) mode. In PIP mode, the  
primary video is displayed on the full screen, and  
the secondary video is displayed in a small window.  
• Press  
(play/pause) to start or pause playback.  
The sound is muted when your player is in pause  
mode. To resume normal playback, press  
(play/pause).  
Primary video  
• Press (stop) to stop playback completely. Press  
(play/pause) to start playback again. Playback  
starts at the beginning of the CD.  
• Press  
to fast-forward. Press  
(play/pause) to  
(play/pause) to  
resume normal playback.  
• Press  
resume normal playback.  
to fast reverse. Press  
Secondary video  
• Press  
to go to the previous track. Press  
to  
See the documentation that came with the disc for  
playback instructions.  
go to the next track.  
• Press SEARCH to select a track, enter the track  
number immediately with the number buttons,  
then press ENTER.  
To use PIP mode:  
1 Press PIP to turn PIP mode on or off.  
Or,  
2 If PIP mode is on, press SECONDARY AUDIO to  
turn the audio for the video in the PIP window  
on or off.  
Enter the track number by pressing the  
appropriate number buttons.  
Using a disc popup menu  
Searching for a title, chapter, or elapsed time  
To use a disc popup menu:  
To search for a title, chapter, or elapsed time:  
1 During Blu-ray or DVD playback, press  
POPUP MENU/TITLE MENU. The Blu-ray popup  
menu or DVD disc menu opens.  
1 During playback, press SEARCH one or more  
times to select a search mode.  
• One press selects Goto Title - - - mode.  
• Two presses selects Goto Chapter - - - mode.  
• Three presses selects Goto Time --: -- : --  
mode.  
2 Press  
ENTER.  
or to select an option, then press  
Selecting the audio mode  
2 Press the number buttons to enter the title  
number, chapter number, or time, then press  
ENTER. Your player goes to the title, chapter, or  
time you entered.  
To select the audio mode:  
1 Press AUDIO. Your player displays audio channel  
information, such as “01/03 Eng Dolby Digital.”  
“01” indicates the currently selected audio  
channel. “03” indicates the total number of  
audio channels. “Eng” (English) indicates the  
audio language. “Dolby Digital” describes the  
currently selected audio format.  
Repeating a title, chapter, or CD track  
To repeat a title, chapter, or CD track:  
• To repeat a title or chapter, press REPEAT one or  
more times to select a repeat mode. You can  
select Off, Repeat Title, Repeat Chapter, Repeat  
track, Repeat all, or Random.  
2 Press to select an audio mode.  
Selecting a viewing angle  
Note  
Creating a playback loop on a DVD or  
audio CD  
Not all discs are recorded with multiple viewing  
angles and not all scenes on a disc have multiple  
viewing angles.  
Note  
Blu-ray Discs do not normally support playback  
loops.  
To select the viewing angle:  
• During playback, press ANGLE. Your player  
displays “Angle X of X.The first “X” indicates the  
current viewing angle, and the second “X”  
indicates the total number of viewing angles.  
To create a playback loop:  
1 Play the disc until you reach the point where  
you want the loop to start, then press A-B.  
2 Play the disc until you reach the point where  
you want the loop to stop, then press A-B. Your  
player plays the loop you created repeatedly.  
3 Press A-B to cancel the loop and return to  
normal playback.  
11  
             
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
4 Press or to select the language you want,  
then press ENTER. You can select English,  
French, or Spanish.  
Using Quick Setup  
To use Quick Setup:  
1 Press ENTER. The Settings menu opens.  
5 Press to go to the previous menu.  
Selecting the disc menu language  
To select the disc menu language:  
1 Press ENTER. The Settings menu opens.  
Music  
2 Press or to select Quick setup, then press  
ENTER. The Quick Setup menu opens.  
Follow the guide to set the most important  
settings for your player.  
2 Press or to select Language. The Language  
Using the Settings menu  
menu opens.  
The settings menu is displayed on the screen  
automatically under No Disc or Stop situations.  
3 Press or to select Menu, then press ENTER.  
4 Press or to select the language you want,  
then press ENTER.  
To use the Settings menus:  
1 Press ENTER on the remote control. The Settings  
Notes  
menu opens.  
Not all languages are available on all discs.  
Most discs only have one menu language.  
5 Press to go to the previous menu.  
Selecting the audio language  
To select the audio menu language:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select an option, then press  
ENTER to open the sub-menu.  
3 Press or RETURN to go to the previous menu.  
Changing the Language settings  
Selecting the on-screen menu language  
2 Press or to select Language. The Language  
To select the on-screen menu language:  
1 Press ENTER. The Settings menu opens.  
menu opens.  
3 Press or to select Audio, then press ENTER.  
4 Press or to select the language you want,  
then press ENTER.  
Notes  
Not all languages are available on all discs.  
Some discs do not let you select the audio  
language using your player’s menu. Instead, you  
have to select the audio language from the disc  
setup menu (the menu that appears after you  
insert the disc).  
5 Press to go to the previous menu.  
2 Press or to select Language. The Language  
menu opens.  
3 Press or to select OSD, then press ENTER.  
12  
     
Wireless Blu-ray Disc Player  
Selecting the subtitle language  
Automatically determining the best HDMI resolution  
To select the subtitle language:  
1 Press ENTER. The Settings menu opens.  
To automatically determine the best HDMI  
resolution:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Language. The Language  
menu opens.  
2 Press or to select Display. The Display  
Preview menu opens. Your player displays the  
best HDMI format for the connected TV.  
3 Press or to select Subtitle, then press  
ENTER.  
3 Press to go to the previous menu.  
4 Press or to select the language you want,  
then press ENTER.  
Selecting the video output resolution  
Notes  
To select the video output resolution:  
1 Press ENTER. The Settings menu opens.  
Not all languages are available on all discs.  
Some discs do not let you select the subtitle  
language from your player. Instead, you have to  
select the subtitle language from the disc setup  
menu (the menu that appears after you insert  
the disc).  
You can also select the subtitle language from the  
Subtitle menu in the on-screen menu.  
Changing the Display settings  
Determining whether an HDMI TV is connected  
To determine whether an HDMI TV is connected:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Display, then press  
ENTER. The Display menu opens.  
3 Press or to select Resolution, then press  
ENTER.  
2 Press or to select Display. The Display  
Preview menu opens.  
If an HDMI TV is connected, Connected appears.  
If an HDMI TV is not connected Disconnected  
appears  
3 Press to go to the previous menu.  
13  
     
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
4 Press or to select the resolution you want,  
5 Press to go to the previous menu.  
then press ENTER.  
Turning film mode on or off  
TV type  
Resolution  
HDMI Auto  
Movies are recorded on film at a rate of 24 pictures  
(frames) per second. Many of the movies on Blu-ray  
Discs are placed on the discs at this frame rate. If  
your TV supports 24 frames per second, but you  
would prefer viewing the video at a higher frame  
rate, you should turn off Film Mode.  
If your TV is a high-definition TV  
(HDTV) connected to the HDMI jack on  
your player and you want your player  
to set the output resolution based on  
information exchanged between the  
TV and your player over the HDMI  
cable  
To turn film mode on or off:  
1 Press ENTER. The Settings menu opens.  
If the TV is a high-definition TV  
(HDTV) capable of 1080p (any frame  
rate) connected to the HDMI jack on  
your player  
1080p (HDMI)  
If your TV is a high-definition TV  
(HDTV) capable of 1080i only  
1080i  
720p  
If your TV is a high-definition TV  
(HDTV) capable of 720p only  
If your TV is an enhanced-definition 480p  
TV (EDTV)  
If your TV is a standard-definition  
NTSC TV (American or Asian SD TV)  
480i  
Notes  
2 Press or to select Display, then press  
Selecting a resolution the TV does not support  
could result in an unstable picture or loss of the  
picture. See the documentation that came with  
the TV to find the resolutions the TV supports.  
Only the HDMI output on your player supports  
1080p video output at any frame rate. If the TV  
is connected to the component output, the  
video output is limited to 1080i or lower.  
ENTER. The Display menu opens.  
3 Press or to select Film Mode (1080p24),  
then press ENTER.  
4 Press or to select Auto or Off. Off selects a  
60 frames/second output format. When the Film  
mode is set to Auto, the output format will go to  
24p automatically, if it's supported.  
5 Press to go to the previous menu.  
Selecting Deep Color  
5 Press to go to the previous menu.  
Selecting the TV aspect ratio  
Select 24 bits, 30 bits, or 36 bits.  
Note  
1 Press ENTER. The Settings menu opens.  
Your player is capable of sending deep (up to 36-bit)  
color over HDMI, if your TV supports it. This expands  
the colors displayed from millions to billions, which is  
much more vivid than the previous.  
To select Deep Color:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Display, then press  
ENTER. The Display menu opens.  
3 Press or to select TV Aspect, then press  
ENTER.  
4 Press or to select the aspect ratio you want,  
then press ENTER. You can select 16:9  
Pillarbox, 4:3 Pan & Scan, 4:3 Letter Box, or  
16:9 wide.  
2 Press or to select Display, then press  
ENTER. The Display menu opens.  
Notes  
If your TV has a rectangular (16:9) aspect ratio,  
choose one of the 16:9 aspect ratios. If your TV  
has a square (4:3) aspect ratio, choose one of the  
4:3 aspect ratios.  
Setting your player for one of the 16:9 settings  
when connected to a 4:3 TV may produce a  
picture that does not correctly fit on the screen.  
3 Press or to select Deep Color, then press  
ENTER.  
14  
 
Wireless Blu-ray Disc Player  
4 Press or to select Auto or Off. If Deep Color  
Selecting the digital audio output mode  
is set to Auto, and the player is connected to TV  
via HDMI cable, the player will first try to set the  
color depth to 36 bits, if the 36 bits is not  
supported by the TV, it will try to set the color  
depth to 30 bits, if the 30 bits is not supported  
by the TV, the player will set the color depth to  
24 bits. If Deep Color is set to Off, the player will  
set the color depth to 24 bits.  
To select the digital audio output mode:  
1 Press ENTER. The Settings menu opens.  
5 Press to go to the previous menu.  
Changing the Audio settings  
Selecting the PCM downsampling rate  
If your player is connected to an audio receiver or  
TV with an optical or coaxial cable, select the  
highest PCM sampling rate the amplifier supports.  
2 Press or to select Audio, then press ENTER.  
To select the PCM downsampling rate:  
1 Press ENTER. The Settings menu opens.  
The Audio menu opens.  
3 Press or to select Digital Output, then  
press ENTER.  
4 Press or to select the digital output mode  
you want, then press ENTER. You can select:  
PCM—Sends a PCM audio signal of up to 7.1  
channels over the HDMI connection and up to  
5.1 channels over the coaxial or optical  
connection.  
Bitstream HD—Lets your player send Dolby  
TrueHD or DTS-MA bitstreams over HDMI (if  
your player is connected to a compatible  
HDMI audio receiver). If your player is not  
connected to a compatible HDMI receiver (for  
example, your player is connected directly to  
the TV or your player is connected to an audio  
receiver using an optical or coaxial cable), a  
compatible audio signal is automatically sent  
over the HDMI and optical or coaxial  
2 Press or to select Audio, then press ENTER.  
The Audio menu opens.  
3 Press or to select PCM Downsampling,  
then press ENTER.  
connections.  
4 Press or one or more times to select the  
PCM downsampling rate you want. You can  
select 48KHz, 96KHz, or Off.  
With this setting, Blu-ray audio is limited to the  
soundtrack for the main movie (no PIP audio).  
If you do not have a surround sound receiver  
connected to your player through one of the  
digital audio jacks (optical or coaxial), select  
48kHz. Otherwise, select the highest sampling  
rate the receiver supports. See the  
Bitstream Legacy—Sends a DTS or Dolby  
Digital bitstream from the disc over the HDMI  
and optical or coaxial connections. Blu-ray  
audio is limited to the soundtrack for the main  
movie (no PIP audio).  
Bitstream mixed—Sends a mixed (PIP audio  
and movie audio) DTS audio stream over the  
HDMI and coaxial or optical connections. This  
mode is primarily intended for use when you  
want to hear both PIP audio and the movie  
audio.  
documentation that came with the receiver.  
Note  
Setting the optical or coaxial audio output’s PCM  
downsampling sampling rate too high may result in  
unpredictable audio playback. If you are not sure, set  
the rate to 48kHz.  
5 Press to go to the previous menu.  
5 Press to go to the previous menu.  
Turning dynamic range control on or off  
Dynamic range control is only active when a Dolby  
Digital signal is detected.  
When Dynamic Range Control is set to Off, movie  
soundtracks are played with the standard dynamic  
range.  
When movie soundtracks are played at low volume  
or from smaller speakers, you can set Dynamic  
Range Control to On. Your player applies  
appropriate compression to make low-level content  
more intelligible and prevent dramatic passages  
from getting too loud.  
15  
 
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
When Dynamic Range Control is set to Auto, the  
system turns on the Dynamic range control for all  
BD movie soundtracks except Dolby TruHD. If you  
have selected a Dolby TruHD track on the BD disc,  
Auto tells the BD player to only turn on dynamic  
range control if information embedded in the  
Dolby TruHD sound track tells it to do so.  
Changing the Parental Control settings  
Setting the parental control password  
To input the parental control password:  
1 Press ENTER. The Settings menu opens.  
To turn dynamic range control on or off:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Parental.  
3 Press ENTER. The password screen opens.  
4 Enter the default password (0000). If you forget  
your password, reset your player to the factory  
defaults. The password will be reset to 0000. For  
more information, see “Resetting settings to the  
factory defaults” on page 18  
2 Press or to select Audio, then press ENTER.  
The Audio menu opens.  
3 Press or to select Dynamic Range Control,  
then press ENTER.  
5 Press to go to the previous menu.  
4 Press or to select Auto or Off.  
5 Press to go to the previous menu.  
Selecting the stereo downmix  
Selecting the parental control country  
If a Blu-ray Disc has parental rating systems for  
more than one country, you can select the country  
you want to use.  
To select the stereo downmix:  
1 Press ENTER. The Settings menu opens.  
To set the parental control country:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Audio, then press ENTER.  
The Audio menu opens.  
2 Press or to select Parental, then press  
3 Press or to select Stereo Downmix, then  
ENTER. The Parental menu opens.  
press ENTER.  
3 Press or to select Parental Country, then  
4 Press or one or more times to select the  
stereo downmix mode you want, you can select  
Auto, Stereo(LoRo), or Surround  
Encoded(LtRt).  
press ENTER.  
Note  
Some Blu-ray Discs do not have multiple countries  
encoded for parental controls.  
4 Press or one or more times to select the  
country you want, then press ENTER.  
5 Press to go to the previous menu.  
16  
 
Wireless Blu-ray Disc Player  
Turning parental controls on or off  
7[NC-17]—Not suitable for anyone under 17.  
8[Adult]—All DVDs can be played.  
To turn parental controls on or off:  
1 Press ENTER. The Settings menu opens.  
Note  
These ratings are for DVDs or Blu-ray Discs only.  
6 Press or to select Parental Control, then  
press ENTER.  
7 Press or to select On, then press ENTER.  
8 Press to go to the previous menu.  
Changing the System settings  
Setting automatic disc playback mode  
To set automatic disc playback mode:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Parental.  
3 Press ENTER. The password screen opens.  
4 Enter the password. If you forget your password,  
reset your player to the factory defaults. The  
password will be reset to 0000. For more  
information, see “Resetting settings to the  
factory defaults” on page 18  
5 Press or to select Parental Control, then  
press ENTER.  
6 Press or to select On or Off, then press  
ENTER. If you select On, you can change the  
other parental control options. If you select Off,  
you cannot change the other parental control  
options.  
2 Press or to select System, then press  
ENTER. The System menu opens.  
3 Press to select Optical Disc Autoplay, then  
Setting the parental control level  
press ENTER.  
4 Press or to On or Off. When On is selected  
and you insert a Blu-ray Disc, playback begins  
automatically. When Off is selected, playback  
does not begin automatically. Select the disc  
from the Settings menu to begin playing it.  
To set the parental control level:  
1 Press ENTER. The Settings menu opens.  
5 Press to go to the previous menu.  
Setting the screen saver activation time  
Your player has a screen saver feature that turns the  
screen black when your player is inactive. You can  
set the amount of time you want your player to wait  
before activating the screen saver.  
To set the screen saver activation time:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Parental, then press  
ENTER. If the parental control option is set to  
ON, input the password.  
3 If the Parental Control option is set to On, set  
the option to Off.  
4 Press or to select Parental Level, then press  
ENTER.  
5 Press or to select the rating level you want  
to block, then press ENTER. That rating and all  
higher ratings will be blocked. You can select:  
1[Kid Safe]—Suitable for all children.  
2[G]—General audiences.  
3[PG]—Parental guidance suggested.  
4[PG-13]—Not suitable for anyone under 13.  
5[PGR]—Parental guidance recommended.  
2 Press or to select System, then press  
ENTER. The System menu opens.  
3 Press or to select Screen Saver Duration,  
then press ENTER.  
6[R]—Not suitable for anyone under 17 unless  
supervised by a parent or adult guardian.  
17  
 
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
4 Press or one or more times to select the  
amount of time you want the player to wait  
before activating the screen saver feature.  
4 Follow the on-screen instructions for updating  
the software.  
5 Press to go to the previous menu.  
5 Press to go to the previous menu.  
Resetting settings to the factory defaults  
Setting Auto Power Down  
Reset all settings and deactivates the connected  
applications. The Parental control password will be  
reset to 0000  
Auto Power Down automatically turns the player off  
if no settings are changed after a selected period of  
time (5, 10, 20, or 30 minutes).  
together.To reset settings to the factory defaults:  
1 Press ENTER. The Settings menu opens.  
Enabling InLink support  
This option is used to allow the TV remote control  
to control certain functions of the Blu-ray player;  
and for the Blu-ray player to control certain  
functions of the TV. InLink control is only available  
when you are using an HDMI connection to your TV.  
Note  
Not all TVs are compatible with your Blu-ray  
player.  
To enable InLink support:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select System, then press  
ENTER. The System menu opens.  
3 Press or to select Restore Factory Defaults,  
then press ENTER. A message appears with a  
warning.  
4 Select OK, then press ENTER to close the  
message box. The Restore factory defaults dialog  
box appears,  
5 Make a selection, then press ENTER.  
6 Press to go to the previous menu.  
2 Press or to select System, then press  
Changing BD-Live settings  
ENTER. The System menu opens.  
Setting the BD-Live Internet access level  
3 Press or to select InLink Support, then  
press ENTER.  
You can set the BD-Live Internet access level to  
control access to BD-Live.  
4 Press or to select On (to allow mutual  
control of devices through HDMI, then press  
ENTER.  
To set the BD-Live Internet access level:  
1 Press ENTER. The Settings menu opens.  
5 Review the User Guide for your TV for CEC setup  
information.  
6 Press to go to the previous menu.  
Downloading player update software  
To download player update software:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select BD-Live, then press  
ENTER. The BD-Live menu opens.  
3 Press or to select BD-Live Internet Access,  
then press ENTER.  
4 Press or one or more times to select the  
access level you want. You can select:  
Limit Access—Allows Internet access with  
2 Press or to select System, then press  
valid “BD-Live” network access approval.  
ENTER. The System menu opens.  
Always Allow Access—Always allows BD-Live  
Internet access.  
3 Press or to select Update Via Network,  
then press ENTER.  
18  
 
Wireless Blu-ray Disc Player  
Prohibit Access—Never allows BD-Live  
Internet access.  
2 Press or to select Network, then press  
ENTER.  
5 Press to go to the previous menu.  
3 Press or to select Wired, then press ENTER.  
The IP Settings screen opens. If the network  
connection is active, Link Up appears next to  
Link Status. If the network connection is not  
active, Link Down appears next to Link Status.  
Viewing available BD-Live storage space  
To view available BD-Live storage space:  
1 Press ENTER. The Settings menu opens.  
IP Settings  
Link Status  
MAC Address  
IP Mode  
IP Address  
Subnet Mask  
Gateway  
Link Down  
00:22:84:04:96:f1  
Dynamic  
0.0.0.0  
0.0.0.0  
0.0.0.0  
Primary DNS  
Secondary DNS  
0.0.0.0  
0.0.0.0  
2 Press or to select BD-Live, then press  
ENTER. The BD-Live menu opens. The available  
storage space is displayed next to BD-Live  
Storage.  
Apply  
Cancel  
4 Press to go to the previous menu.  
3 Press to go to the previous menu.  
Configuring a wired Internet connection  
Erasing BD-Live storage  
To configure the wired Internet connection:  
1 Press ENTER. The Settings menu opens.  
To erase BD-Live storage:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Network, then press  
2 Press or to select BD-Live, then press  
ENTER.  
ENTER. The BD-Live menu opens.  
3 Press or to select Wired, then press ENTER.  
3 Press or to select Erase BD-Live Storage,  
The IP Settings screen opens.  
then press ENTER.  
4 Press or to select OK, then press ENTER. All  
bookmarks and BD-live content saved in  
memory are deleted.  
IP Settings  
Link Status  
MAC Address  
IP Mode  
IP Address  
Subnet Mask  
Gateway  
Link Down  
00:22:84:04:96:f1  
Dynamic  
0.0.0.0  
5 Press to go to the previous menu.  
Changing the Network settings  
Determining if the network connection is active  
0.0.0.0  
To determine if the network connection is active:  
1 Press ENTER. The Settings menu opens.  
0.0.0.0  
0.0.0.0  
0.0.0.0  
Primary DNS  
Secondary DNS  
Apply  
Cancel  
4 Press or to select IP Mode, then press  
ENTER.  
19  
 
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
5 Press or to select an IP mode. You can  
Connect—Connect to this network.  
Disconnect—Disconnect from this network.  
Delete—Delete the current network.  
WPS Pin—Create a random PIN number  
password.  
select:  
Dynamic—Uses DHCP to automatically  
obtain an IP address.  
Manual—Lets you manually configure  
network settings, such as IP address, subnet  
mask, and gateway settings. If you select  
Manual, the following screen opens. Enter the  
IP information here.  
6 If your network does not use encryption, press  
or to select Connect, then press ENTER. If  
the wireless network is working, you should see  
a checkmark and a connected message on the  
TV. If the message does not appear, repeat the  
steps above.  
Please enter new IP Address  
Valid range of each segment is 0 to 255  
OR  
Current value  
New Value  
111.11.11.11  
Cancel  
If your network uses encryption:  
1 Press or to select the Password field, then  
OK  
press ENTER. An on-screen keyboard opens.  
Off—Disables the network interface.  
6 Press to go to the previous menu.  
2 Press  
or to select the first letter in the  
password, then press ENTER. Repeat this step to  
enter the rest of the password. If you make a  
mistake, use backspace key to delete the  
character.  
Configuring a wireless Internet connection  
To configure the wireless Internet connection:  
3 After you enter the password, select the circled  
X in the upper right-hand corner of the  
keyboard, then press ENTER to close the  
keyboard.  
1 Press ENTER. The Settings menu opens.  
4 Press or to select Connect, then press  
ENTER. If the wireless network is working, you  
should see a checkmark and a connected  
message on the TV. If the message does not  
appear, repeat the steps above.  
Setting up WiFi protection (WPS)  
To set up WiFi protection (WPS):  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Network, then press  
ENTER.  
3 Press or to select Wireless, then press  
ENTER. The Wireless Settings screen opens.  
2 Press or to select Network, then press  
ENTER.  
3 Press or to select Wireless, then press  
ENTER. The Wireless Settings screen opens.  
4 Press or to select Network List, then press  
ENTER. The Network List screen opens, showing  
a list of available wireless networks.  
5 Press or to select the wireless network you  
want your player to connect to. A Network Setup  
screen opens with the following options:  
4 Press or to select Settings, then press  
ENTER. The Settings menu opens.  
5 Press or to select Network.  
20  
 
Wireless Blu-ray Disc Player  
6 Press or to select Wireless, then press  
Using the network test  
ENTER. A list of wireless options opens.  
The Network Test menu item lets you test the  
7 Press or to select WiFi Protected Setup,  
then press ENTER. A screen appears, asking you  
to press the button on your router.  
8 Press the button on top of your router. A screen  
should appear on your TV that says “Success”  
when your player is connected to the router.  
Press ENTER to close the message.  
connectivity of your players configuration by  
pinging an IP address.  
To test the network:  
1 Press ENTER. The Settings menu opens.  
9 Press to go to the previous menu.  
Manually setting access point entry  
To configure the wireless Internet connection:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select Network, then press  
ENTER.  
3 Press or to select Network Test, then press  
ENTER.  
Network Test will run three tests.  
Local Network Test. If this test fails, you need  
to check your connection to your home  
network.  
If you have a wired connection:  
• Make sure your network cable is securely  
attached to your router and your player.  
2 Press or to select Network, then press  
ENTER.  
3 Press or to select Wireless, then press  
ENTER. The Wireless Settings screen opens.  
• Make sure your router is connected to your  
cable or DSL modem correctly.  
If you have a wireless connection:  
• Make sure your router is connected to your  
cable or DSL modem correctly.  
• Make sure your player is within the range  
of your router.  
• Make sure the desired WIFI network is  
selected.  
If you have a security password, be sure you  
have entered the password correctly.  
If further help is need for setting up security  
and obtaining your security password, contact  
your router manufacturer and/or cable or DSL  
modem manufacturer.  
DNS Sever Test. If this test fails, there may be  
an issue with your internet service provider.  
4 Press or to select Manual, then press  
ENTER. The following screen opens.  
Edit Access Point Entry  
Off  
AdHoc  
Disabled  
Encryption  
Name  
• Make sure your router is connected to your  
cable or DSL modem correctly.  
OK  
Cancel  
• Contact your internet service provider for  
more help.  
Internet Connection Test. If this test fails,  
there may be an issue with your internet  
service provider.  
5 Enter network names, passwords, and so on,  
then press OK.  
• Make sure your router is connected to your  
Note  
cable or DSL modem correctly.  
If the password you are inputting contains letters,  
press ENTER and a small keyboard will open on  
the screen.  
• Contact your internet service provider for  
more help.  
21  
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
Use commercial software, such as Nero™, to  
“burn” the .iso file onto a disc.  
Upgrading your players  
firmware  
To create an update USB stick:  
1 Download the firmware upgrade .iso file to a  
computer with a USB port.  
We may occasionally offer upgrades to the players  
software. There are three ways to update the player:  
• Automatic upgrades over the Internet  
2 Remove all .dat and .iso files from the root  
directory of the USB memory stick.  
• Upgrading the player software with a disc or USB  
stick  
3 Copy the .iso file to the root directory of the USB  
stick.  
• Upgrading the player using a network connection  
Updating the player software with the disc or USB stick  
Once you have created an update CD or USB stick as  
described in the section, perform the following  
steps to update the player’s software.  
Upgrading the player using a network  
connection  
If you are connected to the Internet, your player can  
automatically check for software updates on the  
manufacturer’s website.  
To upgrade the player software with a disc or  
USB stick:  
1 Eject any discs that may be in the player and  
remove any USB sticks already inserted in the  
player.  
2 Turn the player off. If using an upgrade USB  
stick, insert the USB memory stick into the  
player’s USB slot.  
To upgrade the player’s firmware using a  
network connection:  
1 If an update is available, a message similar to the  
following appears whenever the Settings menu  
is selected on the player.  
3 Turn the player back on. If you are using an  
upgrade disc, open the tray and insert the  
update disc.  
A software update for your player  
is available, containing:  
Various updates;  
4 After a short period of time, a screen similar to  
the one below appears.  
Press (red button) to install  
these updates  
Below, select OK to proceed with the update or Cancel to abort, then press the Enter key  
Player model  
INSIGNIA NS-WBRDVD2 BD Player  
Player current version:  
Update version:  
PKG_085  
PKG_90  
2 Press the red button to install the updates.  
To automatically upgrade the firmware over the  
Internet:  
Ok  
Cancel  
• If you see the above message, and want to update  
your player’s firmware, use the arrow keys to  
highlight OK, then press ENTER. The software  
begins downloading and a status bar appears on  
the TV screen, similar to what is shown below:  
5 Press ENTER. The software update begins.  
During the software update, a timer counts  
down the approximate number of minutes and  
seconds remaining for the update.  
Below, select OK to proceed with the update or Cancel to abort, then press the Enter key  
6 Once the update is complete, a screen appears.  
If you used a CD for the update, eject the update  
disc, and then throw it away. If you used an  
update USB stick, power down the player, and  
then erase any update .iso files placed on the  
root directory of the USB stick before using it  
again.  
Player model  
INSIGNIA NS-WBRDVD2 BD Player  
Player current version:  
Update version:  
PKG_085  
PKG_90  
Ok  
Cancel  
• Once the update is complete, a message appears  
indicating that the player will turn itself off and  
on.  
Maintaining  
General guidelines  
Upgrading the player software with a disc or  
USB stick  
• The top and back panels of your player may  
become hot after a long period of use. This is not a  
malfunction.  
• When your are not using your player, make sure  
that you remove the disc and put your player into  
standby mode.  
In order to perform the upgrade, you must first go  
to the companys website and click on the Support  
link. From there, you must either create an upgrade  
disc, or an update USB stick.  
• If you do not use your player for a long period of  
time, it may not function correctly. Turn on and  
use your player occasionally.  
• Do not place objects on the disc tray.  
• Do not locate your player:  
To create an update disc:  
1 Download the firmware upgrade .iso file to a  
computer.  
2 Copy the .iso file directly to a data CD or DVD,  
then finalize the disc.  
• Near heating devices or in an enclosed vehicle  
- OR -  
22  
         
Wireless Blu-ray Disc Player  
• In an area with a temperature over 104°F  
FAQ (frequently asked  
questions)  
(40°C) or humidity over 90%  
• Dirty places  
• In an area with direct exposure to sunlight  
• Do not install this equipment in a confined  
space such as a book case or similar unit. The  
ventilation should not be impeded by  
Question  
Answer  
What do I need to play multi-channel Connect the appropriate  
covering the ventilation openings with items  
surround sound?  
amplifier/receiver to the HDMI jack,  
such as newspapers, table-cloths, or curtains.  
the DIGITAL AUDIO OUT jack  
• Make sure that you leave a minimum of 4 inches  
(10 cm) around your player for sufficient  
ventilation.  
(OPTICAL or COAXIAL).  
Can I connect headphones to my  
player?  
You cannot directly connect  
headphones to your player. Connect  
headphones to the connected TV or  
sound system.  
Electrical disturbance  
If you place your player next to a radio, TV, or VCR,  
the image may be poor and the sound may be  
distorted. In this case, move your player away from  
the radio, TV, or VCR.  
My television has COMPOSITE VIDEO HDMI provides the best video and  
IN, COMPONENT(YUV) IN and HDMI IN audio. Component video provides  
jacks. Which should I use?  
better video than composite video,  
but not as good as HDMI video.  
Composite video provides good video.  
Can I play Blu-ray Discs and DVDs  
bought in another country?  
You can play them if the video  
standard is NTSC. However, you  
cannot play:  
Condensation  
Condensation may form inside your player when:  
• You move your player from a cold area to a warm  
area  
• You use it in a cold room where you have just  
turned on a heater  
• Air conditioning is blowing directly on your player  
• Your player is in a damp place  
If condensation forms inside your player, your  
player will not work correctly. Turn on your player,  
remove the disc and leave the tray open, then leave  
your player on for two to three hours.  
To minimize condensation problems, keep the  
power cord connected to a power outlet.  
Blu-ray Discs that do not  
include region code A.  
DVDs that do not include  
region code 1 or ALL.  
Region codes are on the discs or disc  
packaging.  
Can I play Blu-ray Discs and DVDs that No. Region codes indicate that a disc  
do not have a region code?  
conforms to industry standards. You  
cannot play a disc that does not have  
a region code.  
What types of discs will my player  
play?  
Your player can play:  
Blu-ray Discs  
DVD-Video, DVD-R/RW (DVD  
Video format and DVD Video  
Recording format), DVD-R DL  
(DVD Video format and DVD  
Video Recording format),  
DVD+R, DVD+RW, and  
DVD+R DL  
Storing discs  
• Do not store discs in a place that is exposed to  
direct sunlight or heat.  
• Do not store discs in a place that is exposed to  
moisture and dust, such as a bathroom or near a  
humidifier.  
• Store discs vertically in their cases. Stacking discs  
or placing objects on discs when not in their cases  
may cause warping.  
Audio CD  
CD-R/RW discs which have  
been recorded in one of the  
following standards: CD-DA  
and still pictures (JPEG).  
Close the session after  
recording.  
Note: Your player cannot write to  
discs.  
Handling discs  
• To keep a disc clean, do not touch the play side  
(non-label side) of the disc.  
• Do not attach paper or tape to the disc.  
Troubleshooting  
Check the following information for the possible  
cause and solution for a problem before contacting  
the nearest service center or dealer for repairs.  
The following do not indicate a problem with your  
player:  
• Regular disc rotation sounds.  
• Image disturbance during search.  
Cleaning discs  
• Before playback, wipe the disc outwards from the  
center (not in a circle) with a clean cloth.  
Resetting your player  
To reset your player:  
• To reset all settings (include parental control  
settings) to the factory default, select one of the  
following options from the System menu:  
• Restore factory settings and deactivate all  
connected applications  
23  
               
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
• Restore factory settings  
• Deactivate all connected applications  
• Deactivate Netflix  
• Deactivate Pandora  
• Deactivate Cinamenow  
Problem  
Start up is slow and audio and video  
output takes a long time  
Solution  
If power has been  
interrupted or the power  
cord has just been  
connected, startup is slow.  
This is not a defect.  
If your player is connected to  
the TV with an HDMI cable,  
startup is slow. This is not a  
defect.  
Power  
Problem  
Solution  
No power  
Make sure that the power cord is  
plugged into a power outlet and that  
the outlet is supplying power.  
When reading a disc, the disc tray  
opens  
Make sure that the disc is not  
dirty. For instructions, see  
“Cleaning discs” on page 23.  
The disc may be  
incompatible with your  
player. Try another disc.  
Reset your player. For  
instructions, see “Resetting  
your player” on page 23.  
The player switches to standby mode After a period of inactivity, your player  
switches to standby mode  
automatically. This is a power saving  
feature.  
If your player switches to standby  
mode unexpectedly, a safety device  
may have been activated. Press  
STANDBY/ON on the front of your  
player.  
Audio or video pause during playback  
Make sure that the disc is not  
dirty. For instructions, see  
“Cleaning discs” on page 23.  
Reset your player. For  
instructions, see “Resetting  
your player” on page 23.  
Operation  
The player is on and the logo and  
menu appear, but there is no image  
from the disc  
Problem  
Remote control does not work  
Solution  
Make sure that the disc is not  
dirty. For instructions on  
cleaning a disc, see  
Make sure that you are  
pointing the remote control  
at the remote control sensor  
on the front of your player.  
Make sure that there are no  
obstructions between the  
remote control and the  
remote control sensor on the  
front of your player.  
“Cleaning discs” on page 23.  
Reset your player. For  
instructions, see “Resetting  
your player” on page 23.  
The player freezes when reading a disc  
Reset your player. For  
instructions, see “Resetting  
your player” on page 23.  
When you see “loading” on  
the screen, press  
Make sure that there is no  
colored glass between the  
remote control and the  
remote control sensor on the  
front of your player. Colored  
glass, such as the glass door  
of an entertainment center,  
can interfere with signal  
reception.  
(open/close) to open the disc  
tray and remove the disc.  
Clean the disc. (For  
instructions, see “Cleaning  
discs” on page 23), then try  
the disc again.  
If your player freezes again,  
the disc may contain some  
content that is not  
compatible with your player.  
Do no try playing the disc  
with your player.  
Make sure that the remote  
control sensor is not exposed  
to direct sunlight or bright  
light. These can interfere  
with signal reception.  
Replace the batteries.  
Some or all functions do not work  
Some functions are not  
allowed by the disc, for  
example, fast-forwarding  
through the warning  
information at the  
beginning of the disc.  
Condensation may have  
formed inside your player.  
Turn off your player and wait  
one to two hours for the  
condensation to evaporate.  
Reset your player. For  
instructions, see “Resetting  
your player” on page 23.  
Playback fails to start or starts then  
stops even when (play/pause) is  
pressed  
Make sure that the disc is  
inserted face up in the disc  
tray.  
Make sure that the disc is not  
dirty. For instructions, see  
“Cleaning discs” on page 23.  
The disc may be blank or  
incompatible with your  
player. Try another disc.  
24  
   
Wireless Blu-ray Disc Player  
TV screen and video  
BD-Live and USB connections  
Problem  
Solution  
Problem  
Solution  
Video does not appear on the TV  
screen or the picture is distorted  
Cannot connect access BD-Live  
content  
Make sure that the TV is  
Make sure that the BD-Live  
connected to the correct  
jacks on the back of your  
player.  
Disc you are using is a legal  
copy.  
Make sure that the USB  
memory stick is connected  
correctly and securely.  
Make sure that the network  
connection is working.  
Make sure that the TV is set  
to the correct video input  
source.  
The TV may be in screen  
saver mode. Check the  
documentation that came  
with the TV for instructions  
about “waking” your TV.  
Reset your player. For  
instructions, see “Resetting  
your player” on page 23.  
After connecting to the Internet,  
cannot download a file  
Erase BD Storage. See  
“Erasing BD-Live storage” on  
page 19.  
Make sure that the Internet  
connection is working.  
Try a different USB memory  
stick.  
Video is not output in high definition  
High definition video cannot  
be output through the VIDEO  
OUT jack. You must connect  
the TV to your player using  
the COMPONENT OUT jacks  
or HDMI jack.  
Make sure that the correct  
HDMI or component video  
resolution has been selected  
in the Setup menu. See  
“Selecting the video output  
resolution” on page 13.  
Depending on the Blu-ray  
Disc, output from the  
File was downloaded, but playback  
from file pauses  
Make sure that the USB  
memory stick is a USB 2.0  
device. Using a USB 1.1  
device may cause pausing.  
Try a different USB memory  
stick.  
Internet and USB connections  
Problem  
Cannot perform automatic setup with  
my wireless router  
Solution  
Only WPS automatic setup is  
supported by the player.  
COMPONENT VIDEO OUT  
jacks may be restricted to  
480p.  
Cannot connect to my wireless router  
Make sure that the router  
automatically allows new  
devices to connect to it.  
The 802.11n specification is  
not finalized, so not all  
802.11n devices are  
The 4:3 aspect ratio picture expands  
left and right or the picture size is  
incorrect  
Use the TV to change the  
aspect ratio. See the  
documentation that came  
with the TV.  
When using a component  
video cable, set TV Aspect  
to 4:3 Pan & Scan.  
compatible.  
There is no apparent change in the  
picture quality when the picture  
settings are changed in the Setup  
menu  
Depending on the video  
type, changes may not be  
apparent.  
Other playback problems  
Problem  
Solution  
When playing a BD-Live disc, the  
screen is black  
This happens when your  
Erase BD Storage. See  
player is changing chapters  
in a playlist.  
“Erasing BD-Live storage” on  
page 19.  
When playing a disc that is  
recorded on both layers,  
audio and video may pause  
when your player is  
Make sure that your Internet  
connection is working.  
Make sure that the Internet  
cable is connected securely  
and correctly to your player  
and the Internet jack. Some  
discs require an Internet  
connection to play.  
changing layers.  
Blu-ray Disc or DVD does not play  
Make sure that the disc has  
the correct region code.  
Check the rating on the disc.  
You may have set parental  
controls to block that rating.  
Some Blu-ray discs will only  
play over an HDMI  
HDMI connections  
connection.  
Problem  
Solution  
Picture-in-Picture (PIP) does not work  
on a Blu-ray Disc  
The 4:3 aspect ratio picture expands  
left and right or the picture size is  
incorrect  
Make sure that the disc  
supports PIP mode.  
Change TV Aspect to 16:9.  
See “Selecting the TV aspect  
ratio” on page 14.  
No subtitles  
Turn on subtitles. See  
“Selecting the subtitle  
language” on page 13.  
Make sure that the disc was  
recorded with subtitles. If  
the disc has subtitles, a  
subtitle option should  
appear on the disc’s menu.  
25  
         
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
Audio performance (frequency  
response)  
DVD (linear audio):  
Problem  
Cannot change the viewing angle  
Solution  
4 Hz to 22 kHz (48 kHz sampling)  
Some discs are not recorded  
4 Hz to 44 kHz (96 kHz sampling)  
with multiple viewing  
angles. Check the  
CD-Audio: 4 Hz to 20 kHz  
S/N ratio: 90 dB  
Dynamic range: 80 dB  
Total harmonic distortion: 0.004%  
Output format: 480i, 480p, 720p,1080i, 1080p  
Output Connector: Type A (19 pin)  
documentation that came  
with the disc.  
Not all scenes on a disc have  
multiple viewing angles.  
Check the documentation  
that came with the disc.  
HDMI output  
Resume function does not work  
General  
If you press (stop) twice,  
the resume information is  
erased.  
Some discs do not support  
the resume function.  
Power  
Power consumption  
Dimensions  
110V-120V ~ 50/60Hz  
15 W  
16.93 × 9.06 × 1.50 inches  
(430 × 230 × 38 mm)  
4.74 lbs. (2.15 kg)  
41°F to 95°F (5°C to 35°C)  
10% to 80%  
L × W × H  
Weight  
Operating temperature  
Operating humidity  
BD-Live technical notes  
• The Insignia player only supports the connection  
of USB memory in order to fulfill the Blu-ray Disc  
Profile 2.0 or “BD-Live” requirement for 1 GB of  
free, available storage. An externally connected  
drive will become the default storage for BD-Live  
content and the internal storage will be ignored.  
• You must have a BD-Live disc in the player to play  
any related (already downloaded) content.  
• Some BD-Live content may expire and will not  
play.  
• You will occasionally need to delete the contents  
in storage in order to free up space. This can be  
done from your players main setup menu, in the  
System submenu (Select Clear BD storage). The  
Insignia player currently only allows deleting the  
entire BD storage.  
• No clock is used to manage the expiration of  
downloaded BD-live content. Instead, time and  
expiration of content is managed by the BD-Live  
server on the Internet.  
Video file requirement (USB/DISC)  
Video file compatibility with your player is limited  
as follows:  
• Maximum resolution size: 1920x1080 (W x H)  
pixels  
• File extensions: .wmv, .avi, .mp4, .mpeg (Note:  
Files encoded by Divx cannot be played on this  
player)  
• Playable Audio format: Dolby Digital , DTS , MP3 ,  
WMA , AAC , AC3  
• Sampling frequency: within 32 to 48kHz (WMA),  
within 16-48kHz (Mp3)  
• Bit rate: within 20-320kbps (WMA), within  
32-320kbps (Mp3)  
• CD-R/RW, DVD R/RW, BD-R/RE Format: ISO  
9660+JOLIET, UDF and UDF Bridge format  
• Maximum Files/Folder: Less than 2000. The movie  
file name and subtitle are limited to 180  
characters.  
• Not all of the WMA and AAC Audio formats are  
compatible with your player.  
• HD WMA movie files contained on a USB 1.0/1.1  
flash drive may not play correctly. Blu-ray, DVD, or  
USB 2.0 are recommended to play back HD WMA  
movie files.  
• Your player does not support files that are  
recorded with GMC (Global Motion  
Compensation) or Qpel (Quarter pixel). Those are  
video encoding techniques in MPEG4 standard,  
like DivX or XVID.  
Specifications  
Specifications are subject to change without notice.  
System and outputs  
Media  
BD-ROM, DVD-Video, DVD+RW/+R,  
DVD-RW/-R, CD-RW/-R  
NTSC  
Electric level output: 1.0 Vp-p  
Resistance: 75 ohms  
Output connector: Pin jack (1 system)  
Y output level: 1.0 Vp-p Resistance: 75 ohms  
PB output level: 0.7 Vp-p Resistance: 75 ohms  
PR output level: 0.7 Vp-p Resistance: 75 ohms  
Output connector: Pin jack (Y: green, PB: blue,  
PR: red)(1 set)  
TV signal system  
Video output  
Component video (Y, CB,CR)  
MP3/WMA audio file requirement (USB/DISC)  
• File extensions: .mp3, .wma  
• Sampling frequency: Within 8 to 48kHz (WMA),  
within 11 to 48kHz (Mp3)  
• Bit rate: Within 8-320kbps (WMA, Mp3)  
• CD-R/RW, DVD R/RW, BD-R/RE Format:  
ISO 9660+JOLIET, UDF and UDF Bridge format  
Output format: 480i, 480p, 720p, 1080i  
Output level: 2 Vrms (1 kHz, 0 dB)  
Output connector: Pin jack  
Audio output (analog)  
Audio output (digital)  
• Maximum Files/Folder: Less than 2000 (total  
Number of connectors: 2-channel (1)  
Optical digital output (1)  
Coaxial digital output (pin jack) (1)  
number of files and folders)  
• Depending on the size and number of the  
MP3/WMA files, it may take several minutes to  
read the contents of the media.  
26  
         
Wireless Blu-ray Disc Player  
• HD WMA movie files contained on a USB 1.0/1.1  
HDMI™  
flash drive may not play correctly. Blu-ray, DVD, or  
USB 2.0 are recommended to play back HD WMA  
movie files.  
Your TV incorporates HDMI™ technology. HDMI, the  
HDMI Logo and High-Definition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing LLC.  
Energy Star  
Photo file requirement (USB/DISC)  
Products that have earned ENERGY STAR® are designed to  
protect the environment through superior energy efficiency.  
Your player is Energy Star compliant.  
• File extensions: .jpg , .jpeg , .png  
• Recommended size:  
• Less than 4,000 x 3,000 x 24 bit/pixel  
• Less than 3,000 x 3,000 x 32 bit/pixel  
• CD-R/RW, DVD R/RW, BD-R/RE Format:  
ISO 9660+JOLIET, UDF, and UDF Bridge format  
• Maximum Files/Folder: Less than 2000 (total  
number of files and folders)  
Sun Microsystems, Inc.  
Java and all other Java trademarks and logos are  
trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and/or other  
countries.  
Macrovision  
• Progressive and lossless compression photo  
image files are not supported.  
• Depending on the size and number of the photo  
files, it may take several minutes to read the  
contents of the media.  
This product incorporates copyright protection technology that  
is protected by U.S. patents and other intellectual property  
rights. Use of this copyright protection technology must be  
authorized by Macrovision, and is intended for home and other  
limited viewing uses only unless otherwise authorized by  
Macrovision. Reverse engineering or disassembly is prohibited.  
Dolby Laboratories  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol are  
trademarks of Dolby Laboratories.  
Legal notices  
FCC Part 15  
This device complies with Part 15 of the FCC Rules. Operation of  
this product is subject to the following two conditions: (1) this  
device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference  
that may cause undesired operation.  
DTS, Inc.  
Manufactured under license under U.S.  
Patent #’s: 5,451,942; 5,956,674; 5,974,380;  
5,978,762; 6,487,535 & other U.S. and  
worldwide patents issued & pending. DTS  
This equipment has been tested and found to comply within the  
limits for a class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following  
measures:  
and the Symbol are registered trademarks, and DTS-HD, DTS-HD  
Advanced Digital Out, and the DTS logos are trademarks of DTS,  
Inc. Ptoduct includes software. ©DTS, Inc. All Rights Reserved.  
PUBLIC LICENSE  
This product contains software that is subject to the GNU Public  
License Version 2 (GPL2). You can obtain a copy of the GPL  
License from  
If you require additional information or you wish to receive  
source code, please call the Insignia support line at  
1-877-467-4289. The source code is available for a period of  
three (3) years from the date of the distribution of this product  
by Insignia.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced technician for help.  
FCC warning  
Changes or modifications not expressly approved by the party  
responsible for compliance with the FCC Rules could void the  
user’s authority to operate this equipment.  
DHHS and FDA safety certification  
This product is made and tested to meet safety standards of the  
FCC, requirements and compliance with safety performance of  
the U.S. Department of Health and Human Services, and also  
with FDA Radiation Performance Standards 21 CFR Subchapter J.  
Canada ICES-003 statement  
This Class B digital apparatus complies with Canadian ICES-003.  
About copyright  
Unauthorized copying, broadcasting, public performance, and  
lending of discs are prohibited. Your player incorporates  
copyright protection technology that is protected by U.S.  
patents and other intellectual property rights. Use of this  
copyright protection technology must be authorized by  
Macrovision, and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision. Reverse  
engineering or disassembly is prohibited.  
27  
   
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
You may charge a fee for the physical act of transferring a copy,  
and you may at your option offer warranty protection in  
exchange for a fee.  
2. You may modify your copy or copies of the Program or any  
portion of it, thus forming a work based on the Program, and  
copy and distribute such modifications or work under the terms  
of Section 1 above, provided that you also meet all of these  
conditions:  
GNU PUBLIC LICENSE  
The BD player runs software that is covered under the GPL. As  
such, we are required to publish the following:  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA  
Everyone is permitted to copy and distribute verbatim copies of  
this license document, but changing it is not allowed.  
a) You must cause the modified files to carry prominent notices  
stating that you changed the files and the date of any change.  
b) You must cause any work that you distribute or publish, that in  
whole or in part contains or is derived from the Program or any  
part thereof, to be licensed as a whole at no charge to all third  
parties under the terms of this License.  
Preamble  
The licenses for most software are designed to take away your  
freedom to share and change it. By contrast, the GNU General  
Public License is intended to guarantee your freedom to share  
and change free software--to make sure the software is free for  
all its users. This General Public License applies to most of the  
Free Software Foundation's software and to any other program  
whose authors commit to using it. (Some other Free Software  
Foundation software is covered by the GNU Lesser General  
Public License instead.) You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not  
price. Our General Public Licenses are designed to make sure  
that you have the freedom to distribute copies of free software  
(and charge for this service if you wish), that you receive source  
code or can get it if you want it, that you can change the  
software or use pieces of it in new free programs; and that you  
know you can do these things.  
To protect your rights, we need to make restrictions that forbid  
anyone to deny you these rights or to ask you to surrender the  
rights.  
These restrictions translate to certain responsibilities for you if  
you distribute copies of the software, or if you modify it.  
For example, if you distribute copies of such a program, whether  
gratis or for a fee, you must give the recipients all the rights that  
you have. You must make sure that they, too, receive or can get  
the source code. And you must show them these terms so they  
know their rights.  
c) If the modified program normally reads commands  
interactively when run, you must cause it, when started running  
for such interactive use in the most ordinary way, to print or  
display an announcement including an appropriate copyright  
notice and a notice that there is no warranty (or else, saying that  
you provide a warranty) and that users may redistribute the  
program under these conditions, and telling the user how to  
view a copy of this License. (Exception: if the Program itself is  
interactive but does not normally print such an announcement,  
your work based on the Program is not required to print an  
announcement.) These requirements apply to the modified work  
as a whole. If identifiable sections of that work are not derived  
from the Program, and can be reasonably considered  
independent and separate works in themselves, then this  
License, and its terms, do not apply to those sections when you  
distribute them as separate works. But when you distribute the  
same sections as part of a whole which is a work based on the  
Program, the distribution of the whole must be on the terms of  
this License, whose permissions for other licensees extend to the  
entire whole, and thus to each and every part regardless of who  
wrote it.  
Thus, it is not the intent of this section to claim rights or contest  
your rights to work written entirely by you; rather, the intent is to  
exercise the right to control the distribution of derivative or  
collective works based on the Program.  
In addition, mere aggregation of another work not based on the  
Program with the Program (or with a work based on the  
Program) on a volume of a storage or distribution medium does  
not bring the other work under the scope of this License.  
3. You may copy and distribute the Program (or a work based on  
it, under Section 2) in object code or executable form under the  
terms of Sections 1 and 2 above provided that you also do one of  
the following:  
a) Accompany it with the complete corresponding  
machine-readable source code, which must be distributed under  
the terms of Sections 1 and 2 above on a medium customarily  
used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years,  
to give any third party, for a charge no more than your cost of  
physically performing source distribution, a complete  
machine-readable copy of the corresponding source code, to be  
distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer  
to distribute corresponding source code. (This alternative is  
allowed only for noncommercial distribution and only if you  
received the program in object code or executable form with  
such an offer, in accord with Subsection b above.)  
The source code for a work means the preferred form of the work  
for making modifications to it. For an executable work, complete  
source code means all the source code for all modules it  
contains, plus any associated interface definition files, plus the  
scripts used to control compilation and installation of the  
executable. However, as a special exception, the source code  
distributed need not include anything that is normally  
distributed (in either source or binary form) with the major  
components (compiler, kernel, and so on) of the operating  
system on which the executable runs, unless that component  
itself accompanies the executable.  
If distribution of executable or object code is made by offering  
access to copy from a designated place, then offering equivalent  
access to copy the source code from the same place counts as  
distribution of the source code, even though third parties are not  
compelled to copy the source along with the object code.  
4. You may not copy, modify, sublicense, or distribute the  
Program except as expressly provided under this License. Any  
attempt otherwise to copy, modify, sublicense or distribute the  
Program is void, and will automatically terminate your rights  
under this License. However, parties who have received copies,  
or rights, from you under this License will not have their licenses  
terminated so long as such parties remain in full compliance.  
We protect your rights with two steps: (1) copyright the software,  
and (2) offer you this license which gives you legal permission to  
copy, distribute and/or modify the software.  
Also, for each author's protection and ours, we want to make  
certain that everyone understands that there is no warranty for  
this free software. If the software is modified by someone else  
and passed on, we want its recipients to know that what they  
have is not the original, so that any problems introduced by  
others will not reflect on the original authors' reputations.  
Finally, any free program is threatened constantly by software  
patents. We wish to avoid the danger that redistributors of a free  
program will individually obtain patent licenses, in effect making  
the program proprietary. To prevent this, we have made it clear  
that any patent must be licensed for everyone's free use or not  
licensed at all.  
The precise terms and conditions for copying, distribution and  
modification follow.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION  
AND MODIFICATION  
0. This License applies to any program or other work which  
contains a notice placed by the copyright holder saying it may  
be distributed under the terms of this General Public License.  
The “Program, below, refers to any such program or work, and a  
“work based on the Program” means either the Program or any  
derivative work under copyright law: that is to say, a work  
containing the Program or a portion of it, either verbatim or with  
modifications and/or translated into another language.  
(Hereinafter, translation is included without limitation in the  
term “modification.) Each licensee is addressed as “you.  
Activities other than copying, distribution and modification are  
not covered by this License; they are outside its scope. The act of  
running the Program is not restricted, and the output from the  
Program is covered only if its contents constitute a work based  
on the Program (independent of having been made by running  
the Program). Whether that is true depends on what the  
Program does.  
1. You may copy and distribute verbatim copies of the Program's  
source code as you receive it, in any medium, provided that you  
conspicuously and appropriately publish on each copy an  
appropriate copyright notice and disclaimer of warranty; keep  
intact all the notices that refer to this License and to the absence  
of any warranty; and give any other recipients of the Program a  
copy of this License along with the Program.  
28  
Wireless Blu-ray Disc Player  
5. You are not required to accept this License, since you have not  
NO WARRANTY  
signed it. However, nothing else grants you permission to modify  
or distribute the Program or its derivative works. These actions  
are prohibited by law if you do not accept this License. Therefore,  
by modifying or distributing the Program (or any work based on  
the Program), you indicate your acceptance of this License to do  
so, and all its terms and conditions for copying, distributing or  
modifying the Program or works based on it.  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,  
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT  
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER  
PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY  
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
6. Each time you redistribute the Program (or any work based on  
the Program), the recipient automatically receives a license from  
the original licensor to copy, distribute or modify the Program  
subject to these terms and conditions. You may not impose any  
further restrictions on the recipients’ exercise of the rights  
granted herein. You are not responsible for enforcing  
compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of  
patent infringement or for any other reason (not limited to  
patent issues),  
conditions are imposed on you (whether by court order,  
agreement or otherwise) that contradict the conditions of this  
License, they do not excuse you from the conditions of this  
License. If you cannot distribute so as to satisfy simultaneously  
your obligations under this License and any other pertinent  
obligations, then as a consequence you may not distribute the  
Program at all. For example, if a patent license would not permit  
royalty-free redistribution of the Program by all those who  
receive copies directly or indirectly through you, then the only  
way you could satisfy both it and this License would be to refrain  
entirely from distribution of the Program.  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF  
THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE  
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY  
SERVICING, REPAIR OR CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR  
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY  
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE  
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR  
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR  
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED  
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR  
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF  
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),  
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
If any portion of this section is held invalid or unenforceable  
under any particular circumstance, the balance of the section is  
intended to apply and the section as a whole is intended to  
apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any  
patents or other property right claims or to contest validity of  
any such claims; this section has the sole purpose of protecting  
the integrity of the free software distribution system, which is  
implemented by public license practices. Many people have  
made generous contributions to the wide range of software  
distributed through that system in reliance on consistent  
application of that system; it is up to the author/donor to decide  
if he or she is willing to distribute software through any other  
system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is  
believed to be a consequence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in  
certain countries either by patents or by copyrighted interfaces,  
the original copyright holder who places the Program under this  
License may add an explicit geographical distribution limitation  
excluding those countries, so that distribution is permitted only  
in or among countries not thus excluded. In such case, this  
License incorporates the limitation as if written in the body of  
this License.  
9. The Free Software Foundation may publish revised and/or  
new versions of the General Public License from time to time.  
Such new versions will be similar in spirit to the present version,  
but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the  
Program specifies a version number of this License which applies  
to it and “any later version, you have the option of following the  
terms and conditions either of that version or of any later version  
published by the Free Software Foundation. If the Program does  
not specify a version number of this License, you may choose any  
version ever published by the Free Software Foundation.  
10. If you wish to incorporate parts of the Program into other free  
programs whose distribution conditions are different, write to  
the author to ask for permission. For software which is  
copyrighted by the Free Software Foundation, write to the Free  
Software Foundation; we sometimes make exceptions for this.  
Our decision will be guided by the two goals of preserving the  
free status of all derivatives of our free software and of  
promoting the sharing and reuse of software generally.  
29  
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player  
Disclaimer  
This Insignia product may contain content and/or services that  
belong to a third party. Such third party content and/or service  
may only be used in compliance with the terms and conditions  
that govern such use. Unless expressly authorized by the  
applicable third party's terms of use, you may not modify, copy,  
republish, upload, post, transmit, translate, sell, create derivative  
works, exploit, or distribute in any manner or medium any third  
party content or service displayed through the Insignia product.  
All third party content or service is provided "as is." Third party  
content or service may be terminated or interrupted at any time.  
Insignia has no control over the networks and transmission  
facilities that third party content and services are transmitted  
through. Any question or request regarding third party content  
or services should be made directly to the applicable third party.  
INSIGNIA EXPRESSLY DISCLAIMS ANY RESPONSIBILITY OR  
LIABILITY FOR ANY AVAILABILITY, INTERRUPTION OR  
SUSPENSION OF ANY THIRD PARTY CONTENT OR SERVICE MADE  
AVAILABLE THROUGH THE INSIGNIA PRODUCT. INSIGNIA DOES  
NOT WARRANT OR MAKE ANY REPRESENTATION, WHETHER  
EXPRESS OR IMPLIED, ABOUT THE SUBSTANCE, QUALITY,  
FUNCTIONALITY, ACCURACY, VALIDITY, TIMELINESS, SUITABILITY,  
AVAILABILITY, COMPLETENESS, FITNESS FOR A PARTICULAR  
PURPOSE, MERCHANTABILITY OR ANY OTHER REPRESENTATION  
ABOUT SUCH CONTENT OR SERVICES. INSIGNIA EXPRESSLY  
DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING  
BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE. UNDER NO  
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL INSIGNIA BE  
LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,  
ATTORNEY FEES, COSTS, EXPENSES, OR ANY OTHER DAMAGES  
ARISING OUT OF OR IN CONNECTION WITH THE USE OF ANY  
THIRD PARTY CONTENT OR SERVICES, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
30  
 
Wireless Blu-ray Disc Player  
This warranty also does not cover:  
One-year limited warranty  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage supply  
Attempted repair by anyone other than a facility  
authorized by Insignia to service the Product  
Products sold as is or with all faults  
Consumables, such as fuses or batteries  
Products where the factory applied serial number has been  
altered or removed  
Insignia Products (“Insignia”) warrants to you, the original  
purchaser of this new product (“Product”), that the Product shall  
be free of defects in the original manufacture of the material or  
workmanship for a period of one (1) year from the date of your  
purchase of the Product (“Warranty Period”). This Product must  
be purchased from an authorized dealer of Insignia brand  
products and packaged with this warranty statement. This  
warranty does not cover refurbished Product. If you notify  
Insignia during the Warranty Period of a defect covered by this  
warranty that requires service, terms of this warranty apply.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS  
YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS  
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS  
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.  
INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES  
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED  
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED  
TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,  
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET  
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR  
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME  
STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO  
THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS  
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY  
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE  
OR PROVINCE TO PROVINCE.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the date you  
purchased the Product. The purchase date is printed on the  
receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the  
material or workmanship of the Product is determined to be  
defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product  
with new or rebuilt parts; or (2) replace the Product at no charge  
with new or rebuilt comparable products or parts. Products and  
parts replaced under this warranty become the property of  
Insignia and are not returned to you. If service of Products or  
parts are required after the Warranty Period expires, you must  
pay all labor and parts charges. This warranty lasts as long as you  
own your Insignia Product during the Warranty Period. Warranty  
coverage terminates if you sell or otherwise transfer the Product.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.  
55423-3645  
How to obtain warranty service?  
If you purchased the Product at a retail store location, take your  
original receipt and the Product to the store you purchased it  
from. Make sure that you place the Product in its original  
packaging or packaging that provides the same amount of  
protection as the original packaging. If you purchased the  
Product from an online web site, mail your original receipt and  
the Product to the address listed on the web site. Make sure that  
you put the Product in its original packaging or packaging that  
provides the same amount of protection as the original  
packaging.  
© 2010 BBY Solutions, Inc.  
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.  
Registered in some countries. All other products and brand  
names are trademarks of their respective owners.  
To obtain in-home warranty service for a television with a screen  
30 inches or larger, call 1-888-BESTBUY. Call agents will diagnose  
and correct the issue over the phone or will have an  
Insignia-approved repair person dispatched to your home.  
Should the Insignia-approved repair person not correct the issue  
on the first call, an Insignia television (size and features to be  
determined by Insignia) will be loaned to you until your TV is  
repaired and returned, at no charge to you. This feature is only  
available to Insignia television consumers residing in the United  
States.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the  
product in the United States, Canada, and Mexico.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as lightning strikes  
Accident  
Misuse  
Abuse  
Negligence  
Commercial use  
Modification of any part of the Product, including the  
antenna  
Plasma display panel damaged by static (non-moving)  
images applied for lengthy periods (burn-in).  
31  
 
(877) 467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, MN USA 55423-3645  
© 2010 BBY Solutions, Inc.  
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries.  
All other products and brand names are trademarks of their respective owners.  
ENGLISH  
10-0745  

Alpine Electronics Car Stereo System CDE W235BT User Manual
Asus VH242 User Manual
Audiovox Rampage ACD28 User Manual
BMW CN1013887ID User Manual
Braun MR 6550 M BC HC User Manual
Franklin Industries, L L C FCW20TC User Manual
Grundig SOUND NEXT EC 4700 RDS User Manual
Hifionics ZRX15SQD4 User Manual
JBL GTO6428 User Manual
JVC GR AX999UM User Manual