Insignia NS BRDVD4 User Manual

User Guide  
Blu-Ray Disc Player  
NS-BRDVD4/NS-BRDVD4-CA  
Changing the BD-Live settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Storing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
BD-Live and USB connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Other playback problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57  
System and outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57  
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57  
Video file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . . . . . . .57  
MP3/WMA audio file requirement (USB/DISC). . . . . . . . . . . . . . .58  
Photo file requirement (USB/DISC). . . . . . . . . . . . . . . . . . . . . . . . . .58  
Legal notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59  
OPEN SOURCE SOFTWARE NOTICE. . . . . . . . . . . . . . . . . . . . . . . . . .60  
GNU PUBLIC LICENSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70  
One-year limited warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71  
Introduction  
Congratulations on your purchase of a high-quality Insignia product. Your  
NS-BRDVD4 or NS-BRDVD4-CA represents the state of the art in Blu-ray  
Disc player design and is designed for reliable and trouble-free  
performance.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
3
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
The lightning flash with arrowhead symbol within an equilateral  
triangle is intended to alert you to the presence of uninsulated  
dangerous voltage within your player’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric shock to  
persons.  
The exclamation point within an equilateral triangle is intended  
to alert you to the presence of important operating and  
maintenance (servicing) instructions in the literature that came  
with your player.  
This symbol is the symbol for CLASS II (Double Insulation).  
Warning  
Your player employs a laser system.  
Use of controls, adjustments, or the  
performance of procedures other than those  
specified may result in hazardous radiation  
exposure.  
Visible laser radiation is present when open and interlocks  
defeated. Do not stare into the beam.  
Disposal of your old appliance  
1. When this crossed-out wheeled bin symbol is attached to a  
product, it means the product is covered by the European  
Directive 2002/96/EC.  
2. All electrical and electronic products should be disposed of  
separately from the municipal waste stream via designated  
collection facilities appointed by the government or the local  
authorities.  
3. The correct disposal of your old appliance will help prevent  
potential negative consequences for the environment and  
human health.  
4. For more detailed information about disposal of your old  
appliance, please contact your city office, waste disposal service,  
or the shop where you purchased the product.  
4
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Important safety instructions  
1
2
3
4
5
6
7
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with a dry cloth.  
Do not block any ventilation openings. Install in accordance with the  
manufacturer's instructions.  
8
9
Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The  
wide blade or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10 Protect the power cord from being walked on or pinched particularly  
at plugs, convenience receptacles, and the point where they exit from  
the apparatus.  
11 Only use attachments/accessories specified by the manufacturer.  
12 Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the apparatus.  
When a cart is used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
13 Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
14 Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as  
power-supply cord or plug is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has been  
dropped.  
15 To reduce the risk of fire or electric shock, do not expose this device to  
rain, moisture, dripping, or splashing, and no objects filled with liquids,  
such as vases, shall be placed on it.  
16 An apparatus with a three-prong, grounding-type plug is a Class I  
apparatus, which needs to be grounded to prevent possible electric  
shock. Make sure that you connect this Class I device to a  
grounding-type, three-prong outlet.  
5
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
17 The wall plug is the disconnecting device. The plug must remain  
readily operable.  
18 Keep a minimum distance of 4 inches (10cm) around the apparatus for  
sufficient ventilation.  
19 Do not install this equipment in a confined space such as book case or  
similar unit. The ventilation should not be impeded by covering the  
ventilation openings with items such as newspaper, table-cloths, or  
curtains.  
20 Batteries should not be exposed to excessive heat such as sunshine,  
fire, or the like.  
Caution  
Danger of explosion if battery is incorrectly replaced. Replace  
only with the same or equivalent type.  
Features  
Full high-definition video playback at up to 1080p resolution for an  
amazing viewing experience.  
Upconversion of standard definition DVDs for enhanced picture quality at  
up to 1080p over an HDMI connection.  
Rich multi-channel surround sound.  
Easy and simple HDTV connection using a single HDMI cable (cable not  
included).  
Multiple outputs for connecting your home theater system or amplifier.  
PIP functionality that lets you display primary and secondary video at the  
same time (if available on the Blu-ray Disc).  
Pop-up menu display without interrupting playback (if available on the  
Blu-ray Disc).  
HDMI 1080p/fps output (Blu-ray Disc only) that provides smooth playback  
of video with a frame rate of 60 frames per second (TV must be connected  
with an HDMI cable and be compatible with 1080p 60 frame).  
Package contents  
Blu-ray Disc player  
Remote control  
AAA batteries (2)  
User Guide  
6
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Playable discs  
Disc type  
Logo  
Disc type  
Logo  
Blu-ray Disc  
CD-R  
DVD-video  
(DVD-ROM)  
Audio CDs (CDDA)  
CD-RW  
DVD-RW  
DVD+RW  
MP3  
DVD-R  
JPEG  
DVD+R  
MPEG4  
Notes  
• Writeable DVD discs (DVD-RW or DVD-R) must be  
finalized, VR-mode only.  
• Playback may not work for some types of discs, or when  
specific operations, such as angle change and aspect ratio  
adjustment, are being performed. Information about the  
discs is written in detail on the box.  
• Do not allow the disc to become dirty or scratched.  
Fingerprints, dirt, dust, scratches, or deposits of cigarette  
smoke on the recording surface may make it impossible to  
use the disc for playback.  
• CD-R/-RW, DVD-RW/-R recorded with UDF or ISO9660  
format can be played back.  
• Windows Media Audio (WMA) files must be written to  
the disc with a .wma file extension in order to be  
recognized and played back correctly.  
• JPEG picture files must be written to the disc with a .jpeg  
or .jpg file extension in order to be recognized and played  
back correctly.  
About Blu-ray Discs  
The massive storage capacity of a Blu-ray Disc allows a higher standard of  
picture and audio quality and a wealth of special effects and enhanced  
features not available on DVDs.  
7
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Java  
Your player features Java support so you can get the most out of  
the latest Blu-ray Discs. When a Blu-ray Disc loads, explore the title  
menu to enjoy extra features such as interactive menus and  
BD-Live.  
HDMI  
HDMI is the only domestic medium capable of transmitting the huge  
volumes of data required by the high picture resolutions and advanced  
digital audio codecs that make Blu-ray such an exciting medium.  
Playing Blu-ray Discs  
Playing Blu-ray Discs are a lot like playing DVDs, except Blu-ray Discs have  
a higher level of interactivity.  
Most of the standard features of DVD playback work the same with Blu-ray  
Disc playback. The two most common exceptions are:  
Resume play—Not available on Blu-ray discs  
A-B repeat (playback loop)—Not available on some Blu-ray Discs  
Color buttons  
The red, green, yellow, and blue buttons on the remote control are used  
with interactive menus when operating a Blu-ray Disc that includes  
BD-Live applications. For more information about using this kind of disc,  
see the instructions that came with the disc.  
Front  
#
Item  
Description  
Insert a disc with the label side up into this tray. To open or close the  
tray, press (open/close).  
1
2
3
4
Disc tray  
Press to open or close the disc tray.  
(open/close)  
Receives signals from the remote control. Do not block.  
Press to start or pause playback.  
Remote control sensor  
(play/pause)  
8
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
#
Item  
Description  
Press to stop playback.  
To resume playback, press  
or to select DVD/BD-ROM,  
then press ENTER. Depending on the disc, playback starts where it  
5
(stop)  
stopped or at the beginning of the disc.  
If you press (stop) twice, playback stops completely. To start  
playback again, press  
(play/pause).  
Press to go to the previous title, chapter, or track.  
6
7
(previous)  
Press to go to the next title, chapter, or track.  
(next)  
Press to turn on your player or put your player in standby mode.  
When your player is in standby mode, power is still entering your  
player. To disconnect power, unplug the power cord.  
8
(standby/on)  
Back  
#
Item  
Description  
Plug the power cord into a power outlet.  
1
Power connector  
USB port  
Plug a USB flash drive into this port.  
2
3
Connect an ethernet cable to this jack and to a broadband Internet  
jack to access BD-Live information or run connected applications.  
ETHERNET jack  
Connect a TV to this jack using an HDMI cable. An HDMI cable carries  
both video and audio.  
4
5
6
7
8
9
HDMI OUT  
Connect a TV to this jack and to the AUDIO OUT L/R jacks using a  
composite video cable (provided).  
VIDEO OUT  
Connect a TV to these jacks and to the AUDIO OUT L/R jacks using a  
component video cable and audio cable.  
COMPONENT VIDEO OUT  
AUDIO OUT L/R  
Connect the audio for a composite TV or component video TV to  
these jacks.  
Connect an optical home theater system to this jack to play the  
sound through the home theater system’s speakers.  
OPTICAL DIGITAL OUT  
COAXIAL DIGITAL OUT  
Connect a coaxial home theater system to this jack to play the sound  
from the TV through the home theater system’s speakers.  
9
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Remote control  
#
Item  
Description  
Press to turn on your player or put your player in standby mode. When your  
player is in standby mode, power is still entering your player. To disconnect  
power, unplug the power cord.  
1
STANDBY/ON  
In playback mode, press SEARCH, then press the number buttons to enter a  
title, chapter, track, or time.  
2
3
4
Number buttons  
SEARCH  
In menu mode, press to enter numbers.  
Press to search for a title, chapter, or specific time on a disc. For more  
information, see “Searching for a title, chapter, or elapsed time” on page 24.  
Press to fast reverse. Each time you press this button, the fast-reverse speed  
decreases from Fast x 2, Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,  
(fast reverse)  
Fast x 128. Press  
(play/pause) to resume normal playback.  
10  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
#
Item  
Description  
Press to fast forward. Each time you press this button, the fast-forward speed  
increases from Fast x 2, Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,  
5
(fast forward)  
Fast x 128. Press  
(play/pause) to resume normal playback.  
Press to zoom in on a video. Each time you press this button, the  
magnification level changes. This button is only used for DVD discs or picture  
files.  
6
7
ZOOM  
Press to stop playback.  
To resume playback, press  
or to select DVD/BD-ROM, then  
press ENTER. Depending on the disc, playback starts where it stopped or at  
(stop)  
the beginning of the disc.  
If you press (stop) twice, playback stops completely. To start playback  
again, press  
(play/pause).  
Press to repeat the current title, chapter, track, or repeat all. For more  
information, see “Repeating a title, chapter, or CD track” on page 25.  
8
9
REPEAT  
RESOLUTION  
A-B  
Press to select the video resolution. For more information, see “Selecting the  
video output resolution” on page 31.  
Press to create a playback loop. For more information, see “Creating a  
playback loop on a DVD or audio CD” on page 25.  
10  
During DVD playback, press to open the DVD root menu where you can select  
DVD playback options. (This button is valid for DVDs that have a multi-layer  
menu.)  
11  
DISC MENU  
If a disc menu opens when playing a Blu-ray Disc or DVD, press to select a  
menu option.  
During media file browsing, press to select a file on the popup menu.  
12  
13  
14  
When a menu is open, press to select an option, then press ENTER.  
Press to confirm selection in a menu.  
ENTER  
Press to stop disc playback and enter home screen.  
When accessing connected applications such as Cinemanow, Pandora, or  
Netflix, pressing HOME/SETUP will stop the application and return you to  
home screen.  
HOME/SETUP  
SUBTITLE  
Press to select a subtitle language or to turn subtitles off.  
15  
16  
When playing a Blu-ray Disc that has a Java™ application, press to control  
playback. For more information, see the documentation that came with the  
Blu-ray Disc.  
A (red), B (green),  
C (yellow), D (blue)  
Press to turn PIP (picture-in-picture) mode on or off. For more information,  
see “Using PIP (picture-in-picture) mode” on page 25.  
17  
PIP  
Press to open or close the disc tray.  
18  
19  
20  
21  
OPEN/CLOSE  
CLEAR  
Press to clear an input error.  
Press to go to the next title, chapter, or track.  
Press to go to the previous title, chapter, or track.  
(next)  
(previous)  
11  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
#
Item  
Description  
Press to advance one frame at a time. Press  
normal playback.  
(play/pause) to resume  
22  
(step)  
(play/pause)  
ANGLE  
Press to start or pause playback.  
23  
24  
25  
Press to select a viewing angle if multiple angles are available on the disc. For  
more information, see “Selecting a viewing angle” on page 26.  
DISPLAY  
Press to display disc information.  
During Blu-ray Disc playback, press to open a menu that lets you control  
Blu-ray Disc playback.  
During DVD playback, press to open the DVD menu (if available). For more  
information, see “Using a disc popup menu” on page 26.  
POPUP MENU/  
TITLE MENU  
26  
27  
28  
RETURN  
AUDIO  
Press to return to the previous menu.  
Press to select the audio mode. For more information, see “Selecting the  
audio mode” on page 26.  
In PIP mode, press to turn the audio for the secondary video on or off. For  
more information, see “Using PIP (picture-in-picture) mode” on page 25.  
29  
SECONDARY AUDIO  
Setting up your player  
Installing remote control batteries  
To install remote control batteries:  
1
Remove the battery compartment cover.  
12  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
2
Insert two AAA batteries into the battery compartment. Make sure  
that the + and – symbols on the batteries match the + and – symbols  
in the battery compartment.  
3
Replace the battery compartment cover.  
Notes  
• Make sure that you insert the batteries correctly.  
• Do not heat, open, or short-circuit batteries.  
• Do not throw batteries into a fire.  
• Do not mix different types of batteries or mix old and  
new batteries.  
• Do not try to recharge non-rechargable batteries.  
• If the remote control does not function correctly or if the  
operating range becomes reduced, replace the batteries.  
13  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Connecting a TV using an HDMI cable (best)  
To connect a TV using an HDMI cable:  
Connect an HDMI cable to the HDMI jack on the back of your  
player and to the HDMI IN jack on the TV.  
TV  
Back of player  
HDMI cable  
Notes  
Only the HDMI is capable of 1080p video output and the highest  
definition audio codecs.  
An HDMI cable carries both video and audio. If you want to use  
TV speakers, you do not need to make an audio connection if you  
are using an HDMI cable. If you want to use an HDMI-capable  
audio receiver, connect an HDMI cable between your player and  
the HDMI input on the receiver.  
Connecting a TV using a component video cable (better)  
Notes  
High definition video (up to 1080i) is supported with a  
component video cable.  
To connect a TV using component cables:  
1
Connect a component video cable to the COMPONENT VIDEO OUT  
jacks on the back of your player and to the COMPONENT VIDEO IN  
jacks on the TV.  
Audio cable  
Back of player  
TV  
Component video cables  
14  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
2
Connect an audio cable to the AUDIO OUT L/R jacks on the back of  
your player and to the AUDIO IN L/R jacks on the TV.  
Connecting a TV using an A/V cable (good)  
To connect a TV using an AV cable:  
Connect an A/V cable to the VIDEO OUT and AUDIO OUT L/R  
jacks on the back of your player and to the VIDEO IN and  
AUDIO IN L/R jack on the TV. Jacks and cable connectors are  
usually color-coded. Make sure that you match the colors.  
TV  
Back of player  
Yellow=Video  
White=Left audio  
Red=Right audio  
Note  
The A/V cable can only send standard-definition video (480i) to  
your TV.  
Connecting audio to an amplifier or home theater system  
To connect audio to an analog amplifier:  
Connect an audio cable to the AUDIO OUT L/R jacks on the  
back of your player and to the AUDIO IN L/R jacks on the  
receiver.  
Back of player  
Analog audio receiver  
Audio cable  
To connect audio to a digital amplifier or home theater system:  
Connect a digital optical cable from the OPTICAL DIGITAL OUT  
jack on the back of your player to the OPTICAL DIGITAL IN jack  
on the receiver.  
- Or -  
15  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Connect a digital coaxial cable from the COAXIAL DIGITAL OUT  
jack on the back of your player to the COAXIAL DIGITAL IN jack  
on the receiver.  
Home theater system  
Back of player  
Connect to the  
OPTICAL DIGITAL  
OUT jack  
Connect to the COAXIAL DIGITAL OUT jack  
Connecting to the Internet  
To connect to the Internet:  
Connect a network cable to the INTERNET jack on the back of  
your player and into a wired router.  
Back of player  
Network cable  
Using your player  
Note  
Unless otherwise noted, all tasks in this section are based on  
using the remote control.  
Playing a Blu-ray Disc or DVD  
To play a Blu-ray Disc or DVD:  
1
Press  
.
2
Turn on the TV, then select the input setting on the TV that matches  
the connection method you used to connect your player.  
3
4
Press to open the disc tray.  
Place a disc on the disc tray with the label facing up, then press to  
close the disc tray. It may take a few seconds for the disc to load.  
5
6
If a Blu-ray Disc or DVD menu opens, press  
or to select PLAY,  
then press ENTER.  
To eject the disc, press  
.
16  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Controlling Blu-ray Disc or DVD playback  
Note  
If  
appears on the screen, the current action is not permitted  
by the disc or your player. For example, many discs do not let you  
fast-forward through the warning information at the beginning  
of the disc.  
To control Blu-ray Disc or DVD playback:  
Press  
muted when your player is in pause mode. To resume normal  
playback, press (play/pause).  
Press (stop) to stop playback, press  
(play/pause) to start or pause playback. The sound is  
(play/pause) to start  
playback again. Depending on the disc, playback starts where it  
stopped or at the beginning of the disc. If you press (stop)  
twice, playback stops completely and will start at the beginning  
of the disc when you resume playback.  
Press  
to fast-forward. Each time you press this button, the  
fast-forward speed changes in the following sequence: Fast x 2,  
x 4, x 8, x 16, x 32, x 64, x 128. Press  
resume normal playback.  
(play/pause) to  
Press  
to fast-reverse. Each time you press this button, the  
fast-reverse speed changes in the following sequence: Fast x 2,  
x 4, x 8, x 16, x 32, x 64, x 128. Press  
normal playback.  
(play/pause) to resume  
Press  
to go to the previous chapter within two seconds after  
the current chapter starts. To go to the beginning of the  
chapter, press  
any time after the first two seconds of the  
chapter is played.  
Press  
Press  
to go to the next chapter.  
(step) to play one frame at a time. Each time you press  
this button, the video advances one frame. Press  
pause) to resume normal playback.  
Using connected applications for the US market  
Notes  
The instructions and support numbers for the connected  
applications apply to the US market only.  
The player is equipped with the capability to watch movies over  
the Internet (for example, from Netflix or CinemaNow), or to  
listen to Pandora Internet radio. Before being able to use these  
Internet services, you must first:  
1. Have connected the player to the Internet, and passed the  
Network Test. See “Configuring the Internet connection” on  
page 46.  
2. Have a valid account to these services.  
You should contact the partner company (not Insignia) if you  
experience an issue using one of these applications.  
17  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Watching movies with CinemaNow  
To set up your CinemaNow account:  
1
First set up your CinemaNow account through your PC. Go to  
2
3
4
Log in to CinemaNow with your account information and password.  
Browse to Activate/Deactivate under the My Account section.  
Click Activate a New Device and sign in again with your user name/  
password.  
5
6
Enter any name in the Name Your Device section, then click  
Continue.  
You now have been provided with a valid activation number to enter  
into the activation field within the Cinemanow application on your  
Blu-ray player.  
7
Once you have successfully established an internet connection on  
your Blu-ray player, select the Cinemanow application using your  
remote control, then press ENTER.  
8
9
Select the Settings tab at the bottom of the screen, then press ENTER.  
Select Activate and enter your activation code. You can now rent  
movies using Cinemanow.  
10 To exit CinemaNow, press Home/Setup.  
Watching movies with Netflix  
Once the conditions above have been met, follow the steps below to  
register your player with Netflix, which enables it to stream movies from  
the Internet to your TV.  
Note  
Users must have a valid Netflix account in order to stream Netflix  
movies to this player.  
To watch movies with Netflix:  
1
2
3
Select Netflix to register the player with your Netflix account. Follow  
the directions on the screen. You will be provided with an activation  
code.  
If you already have an existing Netflix account, log in to your account  
on your PC. Click on the Your Account & Help link in the upper right  
corner of the screen.  
In the WATCHING INSTANTLY ON YOUR TV OR COMPUTER section,  
click Activate a Netflix Ready Device and enter the activation code  
from Step 1.  
- OR -  
18  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
If you do not have an existing Netflix account, go to http://  
activation code from Step 1 into the Insignia code field on screen.  
4
5
After setting up your account and activating your Blu-ray player,  
browse to Instant under the Your Queue tab and add movies to your  
queue.  
To exit Netflix, press Home/Setup.  
Listening to music with Pandora  
For existing Pandora customers:  
1
Select Pandora.  
2
Select I have a Pandora account from the options, then sign in with  
your account information.  
For new Pandora customers:  
1
Select Pandora.  
2
Select I am new to Pandora from the options. You will receive an  
activation code.  
3
4
5
code from Step 2, then click Activate.  
Click Create a Pandora Account and follow the on-screen  
instructions.  
To exit Pandora, press Home/Setup.  
To create a new Pandora account using a PC:  
Using connected applications for the Canadian market  
To stay up-to-date on future service options, visit  
Using BD-Live  
Some BD discs contain additional features that are made available to  
players that are connected to the Internet and have additional USB  
memory sticks added.  
These additional features may include things like:  
The ability to download new movie trailers.  
Additional commentary by actors and directors.  
Multiperson game play and chat.  
19  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
In order to access BD-Live functions, the player must be properly  
configured for BD-Live Internet access and it must be equipped with  
additional USB memory sticks.  
Setting up your player for BD-Live Internet access  
To set your player up for BD-Live Internet Access:  
1
Press ENTER. The Settings menu opens.  
2
3
Press or to select BD-Live. The BD-Live menu opens.  
Press , press or to select BD-Live Internet Access, then press  
ENTER. Make sure that either Limit Access or Always Allow Access is  
checked.  
4
5
Insert a USB memory stick. The USB stick must be at least 1 GB and be  
formatted as FAT32.  
If there is not at least 1 GB of free space on your player, try to select  
Clear BD Storage from the BD-Live menu.  
6
7
8
Press to go to the previous menu.  
Press or to select Network, then press ENTER.  
Configure your Internet connection as described in “Configuring the  
Internet connection” on page 46.  
Note  
Your player must pass the network test (see “Using the network  
test” on page 47) or you are not connected to the Internet and  
cannot access BD-Live content on the web.  
Displaying Blu-ray Disc or DVD information  
Note  
The information displayed for discs other than Blu-ray Discs will  
be different.  
20  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
To display Blu-ray Disc or DVD information:  
Press DISPLAY. Your player displays information about the Disc,  
such as type of disc, current elapsed time in title, total amount  
of time in title, current chapter, and total number of chapters.  
Press DISPLAY again to close the display.  
Playing files on a data disc or USB memory stick  
When you insert a data disc or USB memory stick containing picture,  
music, or video files into your player, icons are added to the menu to  
indicate that video, music, or picture files are available for playback.  
Videos  
Settings  
Music  
Pictures  
21  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Viewing photographs  
Your player can display digital photograph files that are on a USB memory  
stick or that have been burned onto a CD, DVD+/-R, DVD+/-R/(W), or  
Blu-ray Disc.  
To view photographs:  
1
Insert a disc or a USB memory stick containing photographs into your  
Blu-ray player. The following menu opens:  
Videos  
Settings  
Music  
Pictures  
2
Press or to select Pictures, then press ENTER. The Picture menu  
opens.  
3
Select one of the following options:  
Select Start Slide Show to view the pictures in the current  
folder one by one.  
Select Settings to set the slide show effect and slide show  
delay time.  
Select Previous folder/Media menu to get back to the  
previous folder.  
22  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
4
5
Select Main Menu to get back to the main menu.  
You can select a single file, then press ENTER to view the file.  
Playing audio or video files  
To play audio or video files:  
1
Press or to select Music or Videos, then press ENTER. A menu  
opens.  
2
Press or to select Play Files, then press ENTER, the files in the  
current folder will be played.  
If you are playing music files and want to view JPG picture files  
at the same time, press RETURN, then press or to select  
Browse Pictures, then press ENTER. Select the JPG files you  
want to view.  
If you want to see information about the file that is playing,  
press or to select Now Playing, then press ENTER. The  
following display appears  
File 1/5 song1.mp3  
Title: Cool Track  
Artist: Ricardo Funiccio  
Album: Dead Dux  
Play  
0:02:00  
0:30:00  
Off  
Off  
Random play indicator  
Repeat indicator  
Play indicator  
23  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Playing an audio CD  
To play an audio CD:  
Press  
Press to open the disc tray.  
1
.
2
3
Place a CD on the disc tray with the label facing up, then press to  
close the disc tray. It may take a few seconds for the CD to load.  
4
To eject the CD, press  
.
Controlling audio CD playback  
To control audio CD playback:  
Press  
muted when your player is in pause mode. To resume normal  
playback, press (play/pause).  
(play/pause) to start or pause playback. The sound is  
Press (stop) to stop playback completely. Press  
(play/  
pause) to start playback again. Playback starts at the beginning  
of the CD.  
Press  
to fast-forward. Press  
(play/pause) to resume  
normal playback.  
Press to fast reverse. Press  
playback.  
Press  
track.  
Press SEARCH to select a track, enter the track number with the  
number buttons, then press ENTER.  
(play/pause) to resume normal  
to go to the previous track. Press  
to go to the next  
Or,  
Enter the track number directly by pressing the appropriate  
number buttons.  
Searching for a title, chapter, or elapsed time  
To search for a title, chapter, or elapsed time:  
1
During playback, press SEARCH one or more times to select a search  
mode.  
One press selects Goto Title - - - mode.  
Two presses selects Goto Chapter - - - mode.  
Three presses selects Goto Time --: -- : -- mode.  
2
Press the number buttons to enter the title number, chapter number,  
or time, then press ENTER. Your player goes to the title, chapter, or  
time you entered.  
24  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Repeating a title, chapter, or CD track  
To repeat a title, chapter, or CD track:  
To repeat a title or chapter, press REPEAT one or more times to  
select a repeat mode. You can select Off, Repeat Title, Repeat  
Chapter, Repeat track, Repeat all, or Random.  
Creating a playback loop on a DVD or audio CD  
Note  
Blu-ray Discs do not normally support playback loops.  
To create a playback loop:  
1
Play the disc until you reach the point where you want the loop to  
start, then press A-B.  
2
Play the disc until you reach the point where you want the loop to  
stop, then press A-B. Your player plays the loop you created  
repeatedly.  
3
Press A-B to cancel the loop and return to normal playback.  
Using PIP (picture-in-picture) mode  
Some Blu-ray Discs are compatible with picture-in-picture (PIP) mode. In  
PIP mode, the primary video is displayed on the full screen, and the  
secondary video is displayed in a small window.  
Primary video  
Secondary video  
See the documentation that came with the disc for playback instructions.  
To use PIP mode:  
1
Press PIP to turn PIP mode on or off.  
2
If PIP mode is on, press SECONDARY AUDIO to turn the audio for the  
video in the PIP window on or off.  
25  
     
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Using a disc popup menu  
To use a disc popup menu:  
1
During Blu-ray or DVD playback, press POPUP MENU/TITLE MENU.  
The Blu-ray popup menu or DVD disc menu opens.  
2
Press  
or to select an option, then press ENTER.  
Selecting the audio mode  
To select the audio mode:  
1
Press AUDIO. Your player displays audio channel information, such as  
“01/03 Eng Dolby Digital.01” indicates the currently selected audio  
channel. “03” indicates the total number of audio channels. “Eng”  
(English) indicates the audio language. “Dolby Digital” describes the  
currently selected audio format.  
2
Press to select an audio mode.  
Selecting a viewing angle  
Note  
Not all discs are recorded with multiple viewing angles and not  
all scenes on a disc have multiple viewing angles.  
To select the viewing angle:  
During playback, press ANGLE. Your player displays “Angle X of  
X.” “The first “X” indicates the current viewing angle, and the  
second “X” indicates the total number of viewing angles.  
Using Quick Setup  
To use Quick Setup:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Quick setup, then press ENTER. The Quick Setup  
menu opens.  
Follow the guide to set the most important settings for your player.  
26  
       
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Using the Settings menu  
The settings menu is displayed on the screen automatically under No Disc  
or Stop situations.  
To use the Settings menu:  
1
Press ENTER on the remote control. The Settings menu opens.  
2
3
Press or to select an option, then press ENTER to open the  
sub-menu.  
Press or RETURN to go to the previous menu.  
Changing the Language settings  
Selecting the on-screen menu language  
To select the on-screen menu language:  
1
Press ENTER. The Settings menu opens.  
2
3
Press or to select Language. The Language menu opens.  
Press or to select OSD, then press ENTER.  
27  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
4
5
Press or to select the language you want, then press ENTER. You  
can select English, French, or Spanish.  
Press to go to the previous menu.  
Selecting the disc menu language  
To select the disc menu language:  
1
Press ENTER. The Settings menu opens.  
2
3
4
Press or to select Language. The Language menu opens.  
Press or to select Menu, then press ENTER.  
Press or to select the language you want, then press ENTER.  
Notes  
• Not all languages are available on all discs.  
• Most discs only have one menu language.  
5
Press to go to the previous menu.  
Selecting the audio language  
To select the audio menu language:  
1
Press ENTER. The Settings menu opens.  
28  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
2
3
4
Press or to select Language. The Language menu opens.  
Press or to select Audio, then press ENTER.  
Press or to select the language you want, then press ENTER.  
Notes  
• Not all languages are available on all discs.  
• Some discs do not let you select the audio language  
using your player’s menu. Instead, you have to select the  
audio language from the disc setup menu (the menu that  
appears after you insert the disc).  
5
Press to go to the previous menu.  
Selecting the subtitle language  
To select the subtitle language:  
1
Press ENTER. The Settings menu opens.  
2
3
4
Press or to select Language. The Language menu opens.  
Press or to select Subtitle, then press ENTER.  
Press or to select the language you want, then press ENTER.  
Notes  
• Not all languages are available on all discs.  
• Some discs do not let you select the subtitle language  
from your player. Instead, you have to select the subtitle  
language from the disc setup menu (the menu that  
appears after you insert the disc).  
• You can also select the subtitle language from the  
Subtitle menu in the on-screen menu.  
29  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Changing the Display settings  
Determining whether an HDMI TV is connected  
To determine whether an HDMI TV is connected:  
1
Press ENTER. The Settings menu opens.  
2
3
Press or to select Display. The Display preview menu opens.  
If an HDMI TV is connected, Connected appears. If an HDMI TV is not  
connected Disconnected appears  
Press to go to the previous menu.  
Automatically determining the best HDMI resolution  
To automatically determine the best HDMI resolution:  
1
Press ENTER. The Settings menu opens.  
2
3
Press or to select Display. The Display preview menu opens. Your  
player displays the best HDMI format for the connected TV.  
Press to go to the previous menu.  
30  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Selecting the video output resolution  
To select the video output resolution:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Display, then press ENTER. The Display menu  
opens.  
3
4
Press or to select Resolution, then press ENTER.  
Press or to select the resolution you want, then press ENTER.  
TV type  
Resolution  
If your TV is a high-definition TV (HDTV) connected to the  
HDMI jack on your player and you want your player to set the  
output resolution based on information exchanged between  
the TV and your player over the HDMI cable  
HDMI Auto  
If the TV is a high-definition TV (HDTV) capable of 1080p (any 1080p (HDMI)  
frame rate) connected to the HDMI jack on your player  
If your TV is a high-definition TV (HDTV) capable of 1080i only 1080i  
If your TV is a high-definition TV (HDTV) capable of 720p only 720p  
If your TV is an enhanced-definition  
TV (EDTV)  
480p  
If your TV is a standard-definition NTSC TV (American or Asian 480i  
SD TV)  
Notes  
• Selecting a resolution the TV does not support could  
result in an unstable picture or loss of the picture. See the  
documentation that came with the TV to find the  
resolutions the TV supports.  
• Only the HDMI output on your player supports 1080p  
video output at any frame rate. If the TV is connected to the  
component output, the video output is limited to 1080i or  
lower.  
5
Press to go to the previous menu.  
31  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Selecting the TV aspect ratio  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Display, then press ENTER. The Display menu  
opens.  
3
4
Press or to select TV Aspect, then press ENTER.  
Press or to select the aspect ratio you want, then press ENTER. You  
can select 16:9 Pillarbox, 4:3 Pan & Scan, 4:3 Letter Box, or 16:9  
wide.  
Notes  
• If your TV has a rectangular (16:9) aspect ratio, choose  
one of the 16:9 aspect ratios. If your TV has a square (4:3)  
aspect ratio, choose one of the 4:3 aspect ratios.  
• Setting your player for one of the 16:9 settings when  
connected to a 4:3 TV may produce a picture that does not  
correctly fit on the screen.  
5
Press to go to the previous menu.  
32  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Turning film mode on or off  
Movies are recorded on film at a rate of 24 pictures (frames) per second.  
Many of the movies on Blu-ray Discs are placed on the discs at this frame  
rate. If your TV supports 24 frames per second, but you would prefer  
viewing the video at a higher frame rate, you should turn off Film Mode.  
To turn film mode on or off:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Display, then press ENTER. The Display menu  
opens.  
3
4
Press or to select Film Mode (1080p24), then press ENTER.  
Press or to select Auto or Off. Off selects a 60 frames/second  
output format. Auto selects an output format of 24p automatically, if  
it's supported.  
5
Press to go to the previous menu.  
Selecting Deep Color  
If Deep Color is set to Auto, and the player is connected to TV via HDMI  
cable, the player will first try to set the color depth to 36 bits. If the TV does  
not support 36 bits, it will try to set the color depth to 30 bits. If the TV  
does not support 30 bits, the player will set the color depth to  
24 bits. If Deep Color is set to Off, the player will set the color depth to 24  
bits.  
Select 24 bits, 30 bits, or 36 bits.  
Note  
The player is capable of sending “deep” (up to 36-bit) color over  
HDMI, if the TV supports it. This expands the colors displayed  
from millions to billions, which is much more vivid than the  
previous.  
33  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
To select Deep Color:  
1 Press ENTER. The Settings menu opens.  
2
Press or to select Display, then press ENTER. The Display menu  
opens.  
3
4
5
Press or to select Deep Color, then press ENTER.  
Press or to select Auto or Off.  
Press to go to the previous menu.  
Changing the Audio settings  
Selecting the PCM downsampling rate  
If your player is connected to an audio receiver or TV with an optical or  
coaxial cable, select the highest PCM sampling rate the amplifier  
supports.  
To select the PCM downsampling rate:  
1
Press ENTER. The Settings menu opens.  
2
3
Press or to select Audio, then press ENTER. The Audio menu  
opens.  
Press or to select PCM Downsampling, then press ENTER.  
34  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
4
Press or one or more times to select the PCM downsampling rate  
you want. You can select 48KHz, 96KHz, or Off.  
If you do not have a surround sound receiver connected to your player  
through one of the digital audio jacks (optical or coaxial), select 48kHz.  
Otherwise, select the highest sampling rate the receiver supports. See  
the documentation that came with the receiver.  
Note  
Setting the optical or coaxial audio output’s PCM downsampling  
sampling rate too high may result in unpredictable audio  
playback. If you are not sure, set the rate to 48kHz.  
5
Press to go to the previous menu.  
Selecting the digital audio output mode  
To select the digital audio output mode:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Audio, then press ENTER. The Audio menu  
opens.  
3
4
Press , press or to select Digital Output, then press ENTER.  
Press or to select the digital output mode you want, then press  
ENTER. You can select:  
PCM—Sends a PCM audio signal of up to 7.1 channels over the  
HDMI connection and up to 5.1 channels over the coaxial or  
optical connection.  
Bitstream HD—Lets your player send Dolby TrueHD or  
DTS-MA bitstreams over HDMI (if your player is connected to a  
compatible HDMI audio receiver). If your player is not  
connected to a compatible HDMI receiver (for example, your  
player is connected directly to the TV or your player is  
connected to an audio receiver using an optical or coaxial  
cable), a compatible audio signal is automatically sent over the  
35  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
HDMI and optical or coaxial connections. With this setting,  
Blu-ray audio is limited to the soundtrack for the main movie  
(no PIP audio).  
Bitstream Legacy—Sends a DTS or Dolby Digital bitstream  
from the disc over the HDMI and optical or coaxial connections.  
Blu-ray audio is limited to the soundtrack for the main movie  
(no PIP audio).  
Bitstream mixed—Sends a mixed (PIP audio and movie audio)  
DTS audio stream over the HDMI and coaxial or optical  
connections. This mode is primarily intended for use when you  
want to hear both PIP audio and the movie audio.  
5
Press to go to the previous menu.  
Turning dynamic range control on or off  
Dynamic range control is only active when a Dolby Digital signal is  
detected.  
When Dynamic Range Control is set to Off, movie soundtracks are  
played with the standard dynamic range.  
When movie soundtracks are played at low volume or from smaller  
speakers, you can set Dynamic Range Control to On. Your player applies  
appropriate compression to make low-level content more intelligible and  
prevent dramatic passages from getting too loud.  
To turn dynamic range control on or off:  
1
Press ENTER. The Settings menu opens.  
2
3
Press or to select Audio, then press ENTER. The Audio menu  
opens.  
Press , press or to select Dynamic Range Control, then press  
ENTER.  
4
5
Press or to select Auto or Off.  
Press to go to the previous menu.  
36  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Selecting the stereo downmix  
To select the stereo downmix:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Audio, then press ENTER. The Audio menu  
opens.  
3
4
Press or to select Stereo Downmix, then press ENTER.  
Press or one or more times to select the stereo downmix mode  
you want, you can select Auto, Stereo(LoRo), or Surround  
Encoded(LtRt).  
Changing the Parental Control settings  
Setting the parental control password  
To input the parental control password:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Parental, then press ENTER. The Password  
screen opens.  
37  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
3
4
Enter the default password (0000). If you forget your password, reset  
your player to the factory defaults. The password will be reset to 0000.  
For more information, see “Resetting settings to the factory defaults”  
on page 43  
Press to go to the previous menu.  
Selecting the parental control country  
If a Blu-ray Disc has parental rating systems for more than one country,  
you can select the country you want to use.  
To set the parental control country:  
1
Press ENTER. The Settings menu opens.  
2
3
Press or to select Parental, then press ENTER. The Parental menu  
opens.  
Press or to select Parental Country, then press ENTER.  
Note  
Some Blu-ray Discs do not have multiple countries encoded for  
parental controls.  
4
5
Press or one or more times to select the country you want, then  
press ENTER.  
Press to go to the previous menu.  
38  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Turning parental controls on or off  
To turn parental controls on or off:  
1
Press ENTER. The Settings menu opens.  
2
3
Press or to select Parental, then press ENTER. The Password  
screen opens.  
Enter the password. If you forget your password, reset your player to  
the factory defaults. The password will be reset to 0000. For more  
information, see “Resetting settings to the factory defaults” on  
page 43  
4
5
Press or to select Parental Control, then press ENTER.  
Press or to select On or Off, then press ENTER. If you select On,  
you can change the other parental control options. If you select Off,  
you cannot change the other parental control options.  
Setting the parental control level  
To set the parental control level:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Parental, then press ENTER. If the Parental  
Control option is ON, input the password. The Parental menu opens.  
39  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
3
4
5
If the Parental Control option is set to On, set the option to Off.  
Press or to select Parental Level, then press ENTER.  
Press or to select the rating level you want to block, then press  
ENTER. That rating and all higher ratings will be blocked. You can  
select:  
1[Kid Safe]—Suitable for all children.  
2[G]—General audiences.  
3[PG]—Parental guidance suggested.  
4[PG-13]—Not suitable for anyone under 13.  
5[PGR]—Parental guidance recommended.  
6[R]—Not suitable for anyone under 17 unless supervised by a  
parent or adult guardian.  
7[NC-17]—Not suitable for anyone under 17.  
8[Adult]—All DVDs can be played.  
Note  
These ratings are for DVDs or Blu-ray Discs only.  
6
7
8
Press or to select Parental Control, then press ENTER.  
Press or to select On, then press ENTER  
Press to go to the previous menu.  
Changing the System settings  
Setting automatic disc playback mode  
To set automatic disc playback mode:  
1
Press ENTER. The Settings menu opens.  
2
3
Press or to select System, then press ENTER. The System menu  
opens.  
Press to select Optical Disc Autoplay, then press ENTER.  
40  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
4
5
Press or to On or Off. When On is selected and you insert a Blu-ray  
Disc, playback begins automatically. When Off is selected, playback  
does not begin automatically. Select the disc from the Settings menu  
to begin playing it.  
Press to go to the previous menu.  
Setting the screen saver activation time  
Your player has a screen saver feature that turns the screen black when  
your player is inactive. You can set the amount of time you want your  
player to wait before activating the screen saver.  
To set the screen saver activation time:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select System, then press ENTER. The System menu  
opens.  
3
4
Press or to select Screen Saver Duration, then press ENTER.  
Press ENTER one or more times to select the amount of time you want  
the player to wait before activating the screen saver feature.  
5
Press to go to the previous menu.  
Setting Auto Power Down  
Auto Power Down automatically turns the player off if no settings are  
changed after a selected period of time (5, 10, 20, or 30 minutes).  
Enabling InLink  
This option is used to allow the TV remote control to control certain  
functions of the Blu-ray player; and for the Blu-ray player to control certain  
functions of the TV. InLink control is only available when you are using an  
HDMI connection to your TV.  
Note  
Not all TVs are compatible with your Blu-ray player.  
41  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
To enable InLink:  
1 Press ENTER. The Settings menu opens.  
2
Press or to select System, then press ENTER. The System menu  
opens.  
3
4
Press or to select InLink, then press ENTER.  
Press or to select On (to allow mutual control of devices through  
HDMI), then press ENTER.  
5
6
Review the User Guide for your TV for CEC setup information.  
Press to go to the previous menu.  
Downloading player update software  
To download player update software:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select System, then press ENTER. The System menu  
opens.  
3
4
5
Press or to select Update Via Network, then press ENTER.  
Follow the on-screen instructions for updating the software.  
Press to go to the previous menu.  
42  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Resetting settings to the factory defaults  
You can reset all of the settings and deactivate the connected  
applications. In addition, the Parental control password will be reset to  
0000.  
To reset settings to the factory defaults:  
1
Press ENTER. The Settings menu opens.  
2
3
4
Press or to select System, then press ENTER. The System menu  
opens.  
Press or to select Restore Factory Defaults, then press ENTER. A  
message appears with a warning.  
Select OK, then press ENTER to close the message box. The Restore  
factory defaults dialog box appears.  
5
6
Select an option, then press ENTER.  
Press to go to the previous menu.  
43  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Changing the BD-Live settings  
Setting the BD-Live Internet access level  
You can set the BD-Live Internet access level to control access to BD-Live.  
To set the BD-Live Internet access level:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select BD-Live, then press ENTER. The BD-Live menu  
opens.  
3
4
Press or to select BD-Live Internet Access, then press ENTER.  
Press or one or more times to select the access level you want. You  
can select:  
Limit Access—Allows Internet access with valid “BD-Live”  
network access approval.  
Always Allow Access—Always allows BD-Live Internet access.  
Prohibit Access—Never allows BD-Live Internet access.  
5
Press to go to the previous menu.  
Viewing available BD-Live storage space  
To view available BD-Live storage space:  
1
Press ENTER. The Settings menu opens.  
44  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
2
Press or to select BD-Live, then press ENTER. The BD-Live menu  
opens. The available storage space is displayed next to BD-Live  
Storage.  
3
Press to go to the previous menu.  
Erasing BD-Live storage  
To erase BD-Live storage:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select BD-Live, then press ENTER. The BD-Live menu  
opens.  
3
4
Press or to select Erase BD-Live Storage, then press ENTER.  
Press or to select OK, then press ENTER. All bookmarks and  
BD-live content saved in memory are deleted.  
5
Press to go to the previous menu.  
Changing the Network settings  
Determining if the network connection is active  
To determine if the network connection is active:  
1
Press ENTER. The Settings menu opens.  
45  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
2
3
Press or to select Network, then press ENTER.  
Press or to select Wired, then press ENTER. The IP Settings screen  
opens. If the network connection is active, Link Up appears next to  
Link Status. If the network connection is not active, Link Down  
appears next to Link Status.  
IP Settings  
Link Status  
MAC Address  
IP Mode  
IP Address  
Subnet Mask  
Gateway  
Link Down  
00:22:84:04:96:f1  
Dynamic  
0.0.0.0  
0.0.0.0  
0.0.0.0  
Primary DNS  
Secondary DNS  
0.0.0.0  
0.0.0.0  
Apply  
Cancel  
4
Press to go to the previous menu.  
Configuring the Internet connection  
To configure the Internet connection:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Network, then press ENTER.  
46  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
3
Press or to select Wired, then press ENTER. The IP Settings screen  
opens.  
IP Settings  
Link Status  
MAC Address  
IP Mode  
IP Address  
Subnet Mask  
Gateway  
Link Down  
00:22:84:04:96:f1  
Dynamic  
0.0.0.0  
0.0.0.0  
0.0.0.0  
Primary DNS  
Secondary DNS  
0.0.0.0  
0.0.0.0  
Apply  
Cancel  
4
5
Press or to select IP Mode, then press ENTER.  
Press or to select an IP mode. You can select:  
Dynamic—Uses DHCP to automatically obtain an IP address.  
Manual—Lets you manually configure network settings, such  
as IP address, subnet mask, and gateway settings.  
Off—Disables the network interface.  
6
Press to go to the previous menu.  
Using the network test  
Test the connectivity of your players configuration by pinging an IP  
address.  
To test the network:  
1
Press ENTER. The Settings menu opens.  
2
Press or to select Network, then press ENTER.  
47  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
3
Press , press or to select Network Test, then press ENTER. A  
dialog opens, showing the progress of the network test. The test  
results appear shortly.  
Upgrading your players firmware  
We may occasionally offer upgrades to the players software. There are  
three ways to update the player:  
Automatic upgrades over the Internet  
Upgrading the player software with a disc or USB stick  
Upgrading the player using a network connection  
Upgrading the player using a network connection  
If you are connected to the Internet, your player can automatically check  
for software updates on the manufacturer’s website.  
To upgrade the player’s firmware using a network connection:  
1
If an update is available, a message similar to the following appears  
whenever the Settings menu is selected on the player.  
A software update for your player  
is available, containing:  
Various updates;  
Press (red button) to install  
these updates  
2
Press the red button to install the updates.  
To automatically upgrade the firmware over the Internet:  
If you see the above message, and want to update your player’s  
firmware, use the arrow keys to highlight OK, then press  
ENTER. The software will begin downloading and a status bar  
appears on the TV screen, similar to what is shown below:  
Below, select OK to proceed with the update or Cancel to abort, then press the Enter key  
Player model  
INSIGNIA NS-BRDVD4BDPLAYER
Player current version:  
Update version:  
PKG_085  
PKG_90  
Ok  
Cancel  
Once the update is complete, a message will appear indicating  
that the player will turn itself off and on.  
48  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Upgrading the player software with a disc or USB memory stick  
In order to perform the upgrade, you must first go to the companys  
website and click on the Support link. From there, you must either create  
an upgrade disc, or an update USB memory stick.  
To create an update disc:  
1
Download the firmware upgrade .iso file to a computer.  
2
Copy the .iso file directly to a data CD or DVD, then finalize the disc.  
- OR -  
Use commercial software, such as Nero™, to “burn” the .iso file onto a  
disc.  
To create an update USB stick:  
1
2
3
Download the firmware upgrade .iso file to a computer with a USB  
port.  
Remove the .dat and .iso files from the root directory of the USB  
memory stick.  
Copy the .iso file to the root directory of the USB memory stick.  
Updating the player software with the disc or USB stick  
Once you have created an update CD or USB stick as described in the  
section, perform the following steps to update the player’s software.  
To upgrade the player software with a disc or USB stick:  
1
2
3
4
Eject any discs that may be in the player and remove any USB sticks  
already inserted in the player.  
Turn the player off. If using an upgrade USB stick, insert the USB  
memory stick into the player’s USB slot.  
Turn the player back on. If you are using an upgrade disc, open the tray  
and insert the update disc.  
After a short period of time, a screen similar to the one below appears.  
Below, select OK to proceed with the update or Cancel to abort, then press the Enter key  
Player model  
INSIGNIA NS-BRDVD4BDPLAYER
Player current version:  
Update version:  
PKG_085  
PKG_90  
Ok  
Cancel  
5
Press ENTER. The software update begins. During the software  
update, a timer counts down the approximate number of minutes and  
seconds remaining for the update.  
49  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
6
Once the update is complete, a screen appears. If you used a CD for the  
update, eject the update disc, and then throw it away. If you used an  
update USB memory stick, power down the player, and then erase any  
update .iso files placed on the root directory of the USB memory stick  
before using it again.  
Maintaining  
General guidelines  
The top and back panels of your player may become hot after a long  
period of use. This is not a malfunction.  
When your are not using your player, make sure that you remove the disc  
and put your player into standby mode.  
If you do not use your player for a long period of time, it may not function  
correctly. Turn on and use your player occasionally.  
Do not place objects on the disc tray.  
Do not locate your player:  
Near heating devices or in an enclosed vehicle  
In an area with a temperature over 104°F (40°C) or humidity  
over 90%  
Dirty places  
In an area with direct exposure to sunlight  
Do not install this equipment in a confined space such as a  
book case or similar unit. The ventilation should not be  
impeded by covering the ventilation openings with items such  
as newspapers, table-cloths, or curtains.  
Make sure that you leave a minimum of 4 inches (10 cm) around your  
player for sufficient ventilation.  
Electrical disturbance  
If you place your player next to a radio, TV, or VCR, the image may be poor  
and the sound may be distorted. In this case, move your player away from  
the radio, TV, or VCR.  
Condensation  
Condensation may form inside your player when:  
You move your player from a cold area to a warm area  
You use it in a cold room where you have just turned on a  
heater  
Air conditioning is blowing directly on your player  
Your player is in a damp place  
50  
       
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
If condensation forms inside your player, your player will not work  
correctly. Turn on your player, remove the disc and leave the tray open,  
then leave your player on for two to three hours.  
To minimize condensation problems, keep the power cord connected to a  
power outlet.  
Storing discs  
Do not store discs in a place that is exposed to direct sunlight or heat.  
Do not store discs in a place that is exposed to moisture and dust, such as  
a bathroom or near a humidifier.  
Store discs vertically in their cases. Stacking discs or placing objects on  
discs when not in their cases may cause warping.  
Handling discs  
To keep a disc clean, do not touch the play side (non-label side) of the disc.  
Do not attach paper or tape to the disc.  
Cleaning discs  
Before playback, wipe the disc outwards from the center (not in a circle)  
with a clean cloth.  
FAQ (frequently asked questions)  
Question  
Answer  
What do I need to play multi-channel Connect the appropriate amplifier/receiver to the HDMI jack, the  
surround sound?  
DIGITAL AUDIO OUT jack (OPTICAL or COAXIAL).  
Can I connect headphones to my  
player?  
You cannot directly connect headphones to your player. Connect  
headphones to the connected TV or sound system.  
My television has COMPOSITE VIDEO HDMI provides the best video and audio. Component video provides  
IN, COMPONENT(YUV) IN and HDMI IN better video than composite video, but not as good as HDMI video.  
jacks. Which should I use?  
Composite video provides good video.  
51  
       
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Question  
Answer  
Can I play Blu-ray Discs and DVDs  
bought in another country?  
You can play them if the video standard is NTSC. However, you cannot  
play:  
Blu-ray Discs that do not include region code A.  
DVDs that do not include region code 1 or ALL.  
Region codes are on the discs or disc packaging.  
Can I play Blu-ray Discs and DVDs that No. Region codes indicate that a disc conforms to industry standards.  
do not have a region code?  
You cannot play a disc that does not have a region code.  
What types of discs will my player  
play?  
Your player can play:  
Blu-ray Discs  
DVD-Video, DVD-R/RW (DVD Video format and DVD Video  
Recording format), DVD-R DL (DVD Video format and DVD  
Video Recording format), DVD+R, DVD+RW, and DVD+R DL  
Audio CD  
CD-R/RW discs which have been recorded in one of the  
following standards: CD-DA and still pictures (JPEG). Close  
the session after recording.  
Note: Your player cannot write to discs.  
Troubleshooting  
Check the following information for the possible cause and solution for a  
problem before contacting the nearest service center or dealer for repairs.  
The following do not indicate a problem with your player:  
Regular disc rotation sounds.  
Image disturbance during search.  
Resetting your player  
To reset your player:  
To reset all settings (include parental control settings) to the factory  
default, select one of the following options in the System menu:  
Restore factory settings and deactivate all connected  
applications  
Restore factory settings  
Deactivate all connected applications  
Deactivate Netflix  
Deactivate Pandora  
Deactivate Cinamenow  
52  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Power  
Problem  
Solution  
No power  
Make sure that the power cord is plugged into a power outlet and that  
the outlet is supplying power.  
The player switches to standby mode After a period of inactivity, your player switches to standby mode  
automatically. This is a power saving feature.  
If your player switches to standby mode unexpectedly, a safety device  
may have been activated. Press STANDBY/ON on the front of your  
player.  
Operation  
Problem  
Solution  
Remote control does not work  
Make sure that you are pointing the remote control at the  
remote control sensor on the front of your player.  
Make sure that there are no obstructions between the remote  
control and the remote control sensor on the front of your  
player.  
Make sure that there is no colored glass between the remote  
control and the remote control sensor on the front of your  
player. Colored glass, such as the glass door of an  
entertainment center, can interfere with signal reception.  
Make sure that the remote control sensor is not exposed to  
direct sunlight or bright light. These can interfere with signal  
reception.  
Replace the batteries.  
Some or all functions do not work  
Some functions are not allowed by the disc, for example,  
fast-forwarding through the warning information at the  
beginning of the disc.  
Condensation may have formed inside your player. Turn off your  
player and wait one to two hours for the condensation to  
evaporate.  
Reset your player. For instructions, see “Resetting your player”  
on page 52.  
Playback fails to start or starts then  
stops even when (play/pause) is  
pressed  
Make sure that the disc is inserted face up in the disc tray.  
Make sure that the disc is not dirty. For instructions, see  
“Cleaning discs” on page 51.  
The disc may be blank or incompatible with your player. Try  
another disc.  
Start up is slow and audio and video  
output takes a long time  
If power has been interrupted or the power cord has just been  
connected, startup is slow. This is not a defect.  
If your player is connected to the TV with an HDMI cable,  
startup is slow. This is not a defect.  
53  
   
Problem  
Solution  
When reading a disc, the disc tray  
opens  
Make sure that the disc is not dirty. For instructions, see  
“Cleaning discs” on page 51.  
The disc may be incompatible with your player. Try another disc.  
Reset your player. For instructions, see “Resetting your player”  
on page 52.  
Audio or video pause during playback  
Make sure that the disc is not dirty. For instructions, see  
“Cleaning discs” on page 51.  
Reset your player. For instructions, see “Resetting your player”  
on page 52.  
The player is on and the logo and  
menu appear, but there is no image  
from the disc  
Make sure that the disc is not dirty. For instructions on cleaning  
a disc, see “Cleaning discs” on page 51.  
Reset your player. For instructions, see “Resetting your player”  
on page 52.  
The player freezes when reading a disc  
Reset your player. For instructions, see “Resetting your player”  
on page 52. When you see “loading” on the screen, press  
(open/close) to open the disc tray and remove the disc. Clean  
the disc. (For instructions, see “Cleaning discs” on page 51),  
then try the disc again.  
If your player freezes again, the disc may contain some content  
that is not compatible with your player. Do no try playing the  
disc with your player.  
TV screen and video  
Problem  
Solution  
Video does not appear on the TV  
screen or the picture is distorted  
Make sure that the TV is connected to the correct jacks on the  
back of your player.  
Make sure that the TV is set to the correct video input source.  
The TV may be in screen saver mode. Check the documentation  
that came with the TV for instructions about “waking” your TV.  
Reset your player. For instructions, see “Resetting your player”  
on page 52.  
Video is not output in high definition  
High definition video cannot be output through the VIDEO OUT  
jack. You must connect the TV to your player using the  
COMPONENT OUT jacks or HDMI jack.  
Make sure that the correct HDMI or component video resolution  
has been selected in the Setup menu. See “Selecting the video  
output resolution” on page 31.  
Depending on the Blu-ray Disc, output from the COMPONENT  
VIDEO OUT jacks may be restricted to 480p.  
The 4:3 aspect ratio picture expands  
left and right or the picture size is  
incorrect  
Use the TV to change the aspect ratio. See the documentation  
that came with the TV.  
When using a component video cable, set TV Aspect to 4:3  
Pan & Scan.  
54  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Problem  
Solution  
There is no apparent change in the  
picture quality when the picture  
settings are changed in the Setup  
menu  
Depending on the video type, changes may not be apparent.  
When playing a BD-Live disc, the  
screen is black  
Erase BD Storage. See “Erasing BD-Live storage” on page 45.  
Make sure that your Internet connection is working.  
Make sure that the Internet cable is connected securely and  
correctly to your player and the Internet jack. Some discs require  
an Internet connection to play.  
HDMI connections  
Problem  
Solution  
The 4:3 aspect ratio picture expands  
left and right or the picture size is  
incorrect  
Change TV Aspect to 16:9. See “Selecting the TV aspect ratio”  
on page 32.  
BD-Live and USB connections  
Problem  
Solution  
Cannot connect access BD-Live  
content  
Make sure that the BD-Live Disc you are using is a legal copy.  
Make sure that the USB memory stick is connected correctly and  
securely.  
Make sure that the network connection is working.  
After connecting to the Internet,  
cannot download a file  
Erase BD Storage. See “Erasing BD-Live storage” on page 45.  
Make sure that the Internet connection is working.  
Try a different USB memory stick.  
File was downloaded, but playback  
from file pauses  
Make sure that the USB memory stick is a USB 2.0 device. Using a USB  
1.1 device may cause pausing.  
Try a different USB memory stick.  
Other playback problems  
Problem  
Solution  
Audio and video pause momentarily  
This happens when your player is changing chapters in a  
playlist.  
When playing a disc that is recorded on both layers, audio and  
video may pause when your player is changing layers.  
Blu-ray Disc or DVD does not play  
Make sure that the disc has the correct region code.  
Check the rating on the disc. You may have set parental controls  
to block that rating.  
Some Blu-ray discs will only play over an HDMI connection.  
55  
     
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Problem  
Solution  
Picture-in-Picture (PIP) does not work  
on a Blu-ray Disc  
Make sure that the disc supports PIP mode.  
No subtitles  
Turn on subtitles. See “Selecting the subtitle language” on  
page 29.  
Make sure that the disc was recorded with subtitles. If the disc  
has subtitles, a subtitle option should appear on the disc’s  
menu.  
Cannot change the viewing angle  
Resume function does not work  
Some discs are not recorded with multiple viewing angles.  
Check the documentation that came with the disc.  
Not all scenes on a disc have multiple viewing angles. Check the  
documentation that came with the disc.  
If you press (stop) twice, the resume information is erased.  
Some discs do not support the resume function.  
BD-Live technical notes  
The Insignia player only supports the connection of USB memory in order  
to fulfill the Blu-ray Disc Profile 2.0 or "BD-Live" requirement for 1GB of  
free available storage. An externally connected drive will become the  
default storage for BD-Live content and the internal storage will be  
ignored.  
You must have a BD-Live disc in the player to play any related (already  
downloaded) content.  
Some BD-Live content may expire and will not play.  
You will occasionally need to delete the contents in storage in order to  
free up space. This can be done from your players main setup menu, in  
the System submenu (Select Clear BD storage). The Insignia player  
currently only allows deleting the entire BD storage.  
No clock is used to manage the expiration of downloaded BD-live content.  
Instead, time and expiration of content is managed by the BD-Live server  
on the Internet.  
56  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Specifications  
Specifications are subject to change without notice.  
System and outputs  
Media  
TV signal system  
Video output  
BD-ROM, DVD-Video, DVD+RW/+R, DVD-RW/-R, CD-RW/-R  
NTSC  
Electric level output: 1.0 Vp-p  
Resistance: 75 ohms  
Output connector: Pin jack (1 system)  
Y output level: 1.0 Vp-p Resistance: 75 ohms  
PB output level: 0.7 Vp-p Resistance: 75 ohms  
PR output level: 0.7 Vp-p Resistance: 75 ohms  
Output connector: Pin jack (Y: green, PB: blue, PR: red)(1 set)  
Output format: 480i, 480p, 720p, 1080i  
Output level: 2 Vrms (1 kHz, 0 dB)  
Output connector: Pin jack  
Component video (Y, CB,CR)  
Audio output (analog)  
Audio output (digital)  
Number of connectors: 2-channel (1)  
Optical digital output (1)  
Coaxial digital output (pin jack) (1)  
DVD (linear audio):  
Audio performance (frequency  
response)  
4 Hz to 22 kHz (48 kHz sampling)  
4 Hz to 44 kHz (96 kHz sampling)  
CD-Audio: 4 Hz to 20 kHz  
S/N ratio: 90 dB  
Dynamic range: 80 dB  
Total harmonic distortion: 0.004%  
Output format: 480i, 480p, 720p,1080i, 1080p  
Output Connector: Type A (19 pin)  
HDMI output  
General  
Power  
Power consumption  
Dimensions  
L × W × H  
Weight  
110V-120V ~ 50/60Hz  
15W  
14.17 × 8.86 × 1.49 inches  
(360 × 225 × 38 mm)  
3.53 lbs. (1.6 kg)  
Operating temperature  
Operating humidity  
41°F to 95°F (5°C to 35°C)  
10% to 80%  
Video file requirement (USB/DISC)  
Video file compatibility with your player is limited as follows:  
Maximum resolution size: 1920x1080 (W x H) pixels  
File extensions: .wmv, .avi, .mp4, .mpeg  
57  
       
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Playable Audio format: Dolby Digital , DTS , MP3 , WMA , AAC , AC3  
Sampling frequency: within 32 to 48kHz (WMA), within 16-48kHz (Mp3)  
Bit rate: within 20-320kbps (WMA), within 32-320kbps (Mp3)  
CD-R/RW, DVD R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF  
Bridge format  
Maximum Files/Folder: Less than 2000. The movie file name and subtitle  
are limited to 180 characters.  
Not all of the WMA and AAC Audio formats are compatible with your  
player.  
HD WMA movie files contained on a USB 1.0/1.1 flash drive may not play  
correctly. Blu-ray, DVD, or USB 2.0 are recommended to play back HD  
WMA movie files.  
Your player does not support files that are recorded with GMC (Global  
Motion Compensation) or Qpel (Quarter pixel). Those are video encoding  
techniques in MPEG4 standard, like DivX or XVID.  
MP3/WMA audio file requirement (USB/DISC)  
File extensions: .mp3, .wma  
Sampling frequency: Within 8 to 48kHz (WMA), within 11 to 48kHz (Mp3)  
Bit rate: Within 8-320kbps (WMA, Mp3)  
CD-R/RW, DVD R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF  
Bridge format  
Maximum Files/Folder: Less than 2000 (total number of files and folders)  
Depending on the size and number of the MP3/WMA files, it may take  
several minutes to read the contents of the media.  
HD WMA movie files contained on a USB 1.0/1.1 flash drive may not play  
correctly. Blu-ray, DVD, or USB 2.0 are recommended to play back HD  
WMA movie files.  
Photo file requirement (USB/DISC)  
File extensions: .jpg , .jpeg , .png  
Recommended size:  
Less than 4,000 x 3,000 x 24 bit/pixel  
Less than 3,000 x 3,000 x 32 bit/pixel  
CD-R/RW, DVD R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF, and UDF  
Bridge format  
Maximum Files/Folder: Less than 2000 (total number of files and folders)  
Progressive and lossless compression photo image files are not  
supported.  
Depending on the size and number of the photo files, it may take several  
minutes to read the contents of the media.  
58  
   
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Legal notices  
FCC Part 15  
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may cause  
undesired operation.  
This equipment has been tested and found to comply within the limits for a class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced technician for help.  
FCC warning  
Changes or modifications not expressly approved by the party responsible for compliance  
with the FCC Rules could void the user’s authority to operate this equipment.  
DHHS and FDA safety certification  
This product is made and tested to meet safety standards of the FCC, requirements and  
compliance with safety performance of the U.S. Department of Health and Human Services,  
and also with FDA Radiation Performance Standards 21 CFR Subchapter J.  
Canada ICES-003 statement  
This Class B digital apparatus complies with Canadian ICES-003.  
About copyright  
Unauthorized copying, broadcasting, public performance, and lending of discs are  
prohibited. Your player incorporates copyright protection technology that is protected by  
U.S. patents and other intellectual property rights. Use of this copyright protection  
technology must be authorized by Macrovision, and is intended for home and other limited  
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or  
disassembly is prohibited.  
HDMI™  
Your TV incorporates HDMI™ technology. HDMI, the HDMI Logo and  
High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI  
Licensing LLC.  
Energy Star  
Products that have earned ENERGY STAR® are designed to protect the environment  
through superior energy efficiency. Your player is Energy Star compliant.  
59  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Sun Microsystems, Inc.  
Java and all other Java trademarks and logos are trademarks or registered  
trademarks of Sun Microsystems, Inc. in the United States and/or other countries.  
Macrovision  
This product incorporates copyright protection technology that is protected by U.S. patents  
and other intellectual property rights. Use of this copyright protection technology must be  
authorized by Macrovision, and is intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision. Reverse engineering or disassembly is  
prohibited.  
Dolby Laboratories  
Manufactured under license from Dolby Laboratories. Dolby and the double-D  
symbol are trademarks of Dolby Laboratories.  
DTS, Inc.  
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;  
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents  
issued & pending. DTS and the Symbol are registered trademarks, and  
DTS-HD, DTS-HD Advanced Digital Out, and the DTS logos are  
trademarks of DTS, Inc. Ptoduct includes software. ©DTS, Inc. All Rights Reserved.  
OPEN SOURCE SOFTWARE NOTICE  
GPLv2 and LGPLv2:  
The software included in this product contains copyrighted software that is licensed under  
GPL (version 2) and LGPL (version 2). You can obtain a copy of the GPLv2 license from http://  
lgpl-2.1.html.  
GPLv2 covered software:  
kernel, net-tools, Bash, BusyBox, cramfs, dhcpcd, e2fsprogs, fdisk, TinyLogin, sysutils,  
iptables, mtd-utils, ntfs-3g, sfdisk, hotplug, utelnetd, procps, termcap  
LGPLv2 covered software:  
libusb, uClibc, cairo, directfb, iconv  
If you require additional information or you wish to receive the complete corresponding  
GPLv2 and LGPLv2 licensed source code, please call the Insignia support line at  
1-877-467-4289. This source code is available for a period of three (3) years from the date of  
the distribution of this product by Insignia.  
Other open source and software notices:  
In addition, portions of the software contained in the BD player are copyright © 2010, The  
This product also includes software developed by the OpenSSL Project for use in the  
OpenSSL Toolkit (http://www.openssl.org).  
Some of the software in this product is based in part on the work of the independent JPEG  
Group.  
This product also contains the “Portmap,” Copyright © 1990 The Regents of the University of  
California, All Rights Reserved.  
This product also includes the following:  
curl: Copyright © 1996 - 2009 Daniel Stenberg ([email protected]).  
60  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
expat: Copyright © 1998-2000 Thai Open Source Software Center Ltd and Clark Cooper;  
Copyright © 2001-2006 Expat maintainers.  
mng: Copyright © 2000 Gerard Juyn ([email protected]).  
png: Copyright Contributing Authors and Group 42, Inc.  
xml: Copyright © 1998-2003 Daniel Veillard. All Rights Reserved.  
zlib: Copyright © 1995-2004 Jean-loup Gailly and Mark Adler  
Permission is hereby granted, free of charge, to any person obtaining a copy of this software  
and associated documentation files (the “Software”), to deal in the Software without  
restriction, including without limitation the rights to use, copy, modify, merge, publish,  
distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the  
Software is furnished to do so, subject to the following conditions:  
THE SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EXPRESS OR  
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE AND NONINFRINGMEENT OF THIRD PARTY RIGHTS. IN NO  
EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES  
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT, OR OTHERWISE, ARISING  
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS  
IN THE SOFTWARE.  
GNU PUBLIC LICENSE  
The BD player runs software that is covered under the GPL. As such, we are required to  
publish the following:  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but  
changing it is not allowed.  
Preamble  
The licenses for most software are designed to take away your freedom to share and change  
it. By contrast, the GNU General Public License is intended to guarantee your freedom to  
share and change free software--to make sure the software is free for all its users. This  
General Public License applies to most of the Free Software Foundation's software and to  
any other program whose authors commit to using it. (Some other Free Software Foundation  
software is covered by the GNU Lesser General Public License instead.) You can apply it to  
your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our General Public  
Licenses are designed to make sure that you have the freedom to distribute copies of free  
software (and charge for this service if you wish), that you receive source code or can get it if  
you want it, that you can change the software or use pieces of it in new free programs; and  
that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid anyone to deny you these  
rights or to ask you to surrender the rights.  
These restrictions translate to certain responsibilities for you if you distribute copies of the  
software, or if you modify it.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must  
give the recipients all the rights that you have. You must make sure that they, too, receive or  
can get the source code. And you must show them these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this  
license which gives you legal permission to copy, distribute and/or modify the software.  
Also, for each author's protection and ours, we want to make certain that everyone  
understands that there is no warranty for this free software. If the software is modified by  
someone else and passed on, we want its recipients to know that what they have is not the  
original, so that any problems introduced by others will not reflect on the original authors'  
reputations.  
61  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Finally, any free program is threatened constantly by software patents. We wish to avoid the  
danger that redistributors of a free program will individually obtain patent licenses, in effect  
making the program proprietary. To prevent this, we have made it clear that any patent must  
be licensed for everyone's free use or not licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
0. This License applies to any program or other work which contains a notice placed by the  
copyright holder saying it may be distributed under the terms of this General Public License.  
The “Program, below, refers to any such program or work, and a “work based on the  
Program” means either the Program or any derivative work under copyright law: that is to  
say, a work containing the Program or a portion of it, either verbatim or with modifications  
and/or translated into another language. (Hereinafter, translation is included without  
limitation in the term “modification.) Each licensee is addressed as “you.  
Activities other than copying, distribution and modification are not covered by this License;  
they are outside its scope. The act of running the Program is not restricted, and the output  
from the Program is covered only if its contents constitute a work based on the Program  
(independent of having been made by running the Program). Whether that is true depends  
on what the Program does.  
1. You may copy and distribute verbatim copies of the Program's source code as you receive  
it, in any medium, provided that you conspicuously and appropriately publish on each copy  
an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that  
refer to this License and to the absence of any warranty; and give any other recipients of the  
Program a copy of this License along with the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at your option  
offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Program or any portion of it, thus forming a  
work based on the Program, and copy and distribute such modifications or work under the  
terms of Section 1 above, provided that you also meet all of these conditions:  
a) You must cause the modified files to carry prominent notices stating that you changed the  
files and the date of any change.  
b) You must cause any work that you distribute or publish, that in whole or in part contains  
or is derived from the Program or any part thereof, to be licensed as a whole at no charge to  
all third parties under the terms of this License.  
c) If the modified program normally reads commands interactively when run, you must  
cause it, when started running for such interactive use in the most ordinary way, to print or  
display an announcement including an appropriate copyright notice and a notice that there  
is no warranty (or else, saying that you provide a warranty) and that users may redistribute  
the program under these conditions, and telling the user how to view a copy of this License.  
(Exception: if the Program itself is interactive but does not normally print such an  
announcement, your work based on the Program is not required to print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that  
work are not derived from the Program, and can be reasonably considered independent and  
separate works in themselves, then this License, and its terms, do not apply to those sections  
when you distribute them as separate works. But when you distribute the same sections as  
part of a whole which is a work based on the Program, the distribution of the whole must be  
on the terms of this License, whose permissions for other licensees extend to the entire  
whole, and thus to each and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written  
entirely by you; rather, the intent is to exercise the right to control the distribution of  
derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with the Program  
(or with a work based on the Program) on a volume of a storage or distribution medium does  
not bring the other work under the scope of this License.  
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object  
code or executable form under the terms of Sections 1 and 2 above provided that you also  
do one of the following:  
62  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
a) Accompany it with the complete corresponding machine-readable source code, which  
must be distributed under the terms of Sections 1 and 2 above on a medium customarily  
used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a  
charge no more than your cost of physically performing source distribution, a complete  
machine-readable copy of the corresponding source code, to be distributed under the terms  
of Sections 1 and 2 above on a medium customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer to distribute  
corresponding source code. (This alternative is allowed only for noncommercial distribution  
and only if you received the program in object code or executable form with such an offer, in  
accord with Subsection b above.)  
The source code for a work means the preferred form of the work for making modifications  
to it. For an executable work, complete source code means all the source code for all  
modules it contains, plus any associated interface definition files, plus the scripts used to  
control compilation and installation of the executable. However, as a special exception, the  
source code distributed need not include anything that is normally distributed (in either  
source or binary form) with the major components (compiler, kernel, and so on) of the  
operating system on which the executable runs, unless that component itself accompanies  
the executable.  
If distribution of executable or object code is made by offering access to copy from a  
designated place, then offering equivalent access to copy the source code from the same  
place counts as distribution of the source code, even though third parties are not compelled  
to copy the source along with the object code.  
4. You may not copy, modify, sublicense, or distribute the Program except as expressly  
provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute  
the Program is void, and will automatically terminate your rights under this License.  
However, parties who have received copies, or rights, from you under this License will not  
have their licenses terminated so long as such parties remain in full compliance.  
5. You are not required to accept this License, since you have not signed it. However, nothing  
else grants you permission to modify or distribute the Program or its derivative works. These  
actions are prohibited by law if you do not accept this License. Therefore, by modifying or  
distributing the Program (or any work based on the Program), you indicate your acceptance  
of this License to do so, and all its terms and conditions for copying, distributing or  
modifying the Program or works based on it.  
6. Each time you redistribute the Program (or any work based on the Program), the recipient  
automatically receives a license from the original licensor to copy, distribute or modify the  
Program subject to these terms and conditions. You may not impose any further restrictions  
on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing  
compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for any  
other reason (not limited to patent issues), conditions are imposed on you (whether by court  
order, agreement or otherwise) that contradict the conditions of this License, they do not  
excuse you from the conditions of this License. If you cannot distribute so as to satisfy  
simultaneously your obligations under this License and any other pertinent obligations, then  
as a consequence you may not distribute the Program at all. For example, if a patent license  
would not permit royalty-free redistribution of the Program by all those who receive copies  
directly or indirectly through you, then the only way you could satisfy both it and this  
License would be to refrain entirely from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular  
circumstance, the balance of the section is intended to apply and the section as a whole is  
intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property  
right claims or to contest validity of any such claims; this section has the sole purpose of  
protecting the integrity of the free software distribution system, which is implemented by  
public license practices. Many people have made generous contributions to the wide range  
of software distributed through that system in reliance on consistent application of that  
system; it is up to the author/donor to decide if he or she is willing to distribute software  
through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of  
the rest of this License.  
63  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
8. If the distribution and/or use of the Program is restricted in certain countries either by  
patents or by copyrighted interfaces, the original copyright holder who places the Program  
under this License may add an explicit geographical distribution limitation excluding those  
countries, so that distribution is permitted only in or among countries not thus excluded. In  
such case, this License incorporates the limitation as if written in the body of this License.  
9. The Free Software Foundation may publish revised and/or new versions of the General  
Public License from time to time. Such new versions will be similar in spirit to the present  
version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Program specifies a version  
number of this License which applies to it and “any later version, you have the option of  
following the terms and conditions either of that version or of any later version published by  
the Free Software Foundation. If the Program does not specify a version number of this  
License, you may choose any version ever published by the Free Software Foundation.  
10. If you wish to incorporate parts of the Program into other free programs whose  
distribution conditions are different, write to the author to ask for permission. For software  
which is copyrighted by the Free Software Foundation, write to the Free Software  
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two  
goals of preserving the free status of all derivatives of our free software and of promoting the  
sharing and reuse of software generally.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR  
THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE  
PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND  
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,  
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL  
ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE  
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY  
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE  
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR  
DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A  
FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH  
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS.  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but  
changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU  
Library Public License, version 2, hence the version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom to share and change  
it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to  
share and change free software--to make sure the software is free for all its users.  
64  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
This license, the Lesser General Public License, applies to some specially designated software  
packages--typically libraries--of the Free Software Foundation and other authors who decide  
to use it. You can use it too, but we suggest you first think carefully about whether this  
license or the ordinary General Public License is the better strategy to use in any particular  
case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price. Our General  
Public Licenses are designed to make sure that you have the freedom to distribute copies of  
free software (and charge for this service if you wish); that you receive source code or can get  
it if you want it; that you can change the software and use pieces of it in new free programs;  
and that you are informed that you can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to deny you  
these rights or to ask you to surrender these rights. These restrictions translate to certain  
responsibilities for you if you distribute copies of the library or if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must give  
the recipients all the rights that we gave you. You must make sure that they, too, receive or  
can get the source code. If you link other code with the library, you must provide complete  
object files to the recipients, so that they can relink them with the library after making  
changes to the library and recompiling it. And you must show them these terms so they  
know their rights.  
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer  
you this license, which gives you legal permission to copy, distribute and/or modify the  
library.  
To protect each distributor, we want to make it very clear that there is no warranty for the  
free library. Also, if the library is modified by someone else and passed on, the recipients  
should know that what they have is not the original version, so that the original author's  
reputation will not be affected by problems that might be introduced by others.  
Finally, software patents pose a constant threat to the existence of any free program. We  
wish to make sure that a company cannot effectively restrict the users of a free program by  
obtaining a restrictive license from a patent holder. Therefore, we insist that any patent  
license obtained for a version of the library must be consistent with the full freedom of use  
specified in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU General Public  
License. This license, the GNU Lesser General Public License, applies to certain designated  
libraries, and is quite different from the ordinary General Public License. We use this license  
for certain libraries in order to permit linking those libraries into non-free programs.  
When a program is linked with a library, whether statically or using a shared library, the  
combination of the two is legally speaking a combined work, a derivative of the original  
library. The ordinary General Public License therefore permits such linking only if the entire  
combination fits its criteria of freedom. The Lesser General Public License permits more lax  
criteria for linking other code with the library.  
We call this license the “Lesser” General Public License because it does Less to protect the  
user's freedom than the ordinary General Public License. It also provides other free software  
developers Less of an advantage over competing non-free programs. These disadvantages  
are the reason we use the ordinary General Public License for many libraries. However, the  
Lesser license provides advantages in certain special circumstances.  
For example, on rare occasions, there may be a special need to encourage the widest  
possible use of a certain library, so that it becomes a de-facto standard. To achieve this,  
non-free programs must be allowed to use the library. A more frequent case is that a free  
library does the same job as widely used non-free libraries. In this case, there is little to gain  
by limiting the free library to free software only, so we use the Lesser General Public License.  
In other cases, permission to use a particular library in non-free programs enables a greater  
number of people to use a large body of free software. For example, permission to use the  
GNU C Library in non-free programs enables many more people to use the whole GNU  
operating system, as well as its variant, the GNU/Linux operating system.  
Although the Lesser General Public License is Less protective of the users' freedom, it does  
ensure that the user of a program that is linked with the Library has the freedom and the  
wherewithal to run that program using a modified version of the Library.  
65  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
The precise terms and conditions for copying, distribution and modification follow. Pay close  
attention to the difference between a “work based on the library” and a “work that uses the  
library. The former contains code derived from the library, whereas the latter must be  
combined with the library in order to run.  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
0. This License Agreement applies to any software library or other program which contains a  
notice placed by the copyright holder or other authorized party saying it may be distributed  
under the terms of this Lesser General Public License (also called “this License”). Each  
licensee is addressed as “you.  
A “library” means a collection of software functions and/or data prepared so as to be  
conveniently linked with application programs (which use some of those functions and data)  
to form executables.  
The “Library, below, refers to any such software library or work which has been distributed  
under these terms. A “work based on the Library” means either the Library or any derivative  
work under copyright law: that is to say, a work containing the Library or a portion of it,  
either verbatim or with modifications and/or translated straightforwardly into another  
language. (Hereinafter, translation is included without limitation in the term “modification.)  
“Source code” for a work means the preferred form of the work for making modifications to  
it. For a library, complete source code means all the source code for all modules it contains,  
plus any associated interface definition files, plus the scripts used to control compilation and  
installation of the library.  
Activities other than copying, distribution and modification are not covered by this License;  
they are outside its scope. The act of running a program using the Library is not restricted,  
and output from such a program is covered only if its contents constitute a work based on  
the Library (independent of the use of the Library in a tool for writing it). Whether that is true  
depends on what the Library does and what the program that uses the Library does.  
1. You may copy and distribute verbatim copies of the Library's complete source code as you  
receive it, in any medium, provided that you conspicuously and appropriately publish on  
each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the  
notices that refer to this License and to the absence of any warranty; and distribute a copy of  
this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option  
offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work  
based on the Library, and copy and distribute such modifications or work under the terms of  
Section 1 above, provided that you also meet all of these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed  
the files and the date of any change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties  
under the terms of this License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied  
by an application program that uses the facility, other than as an argument passed when  
the facility is invoked, then you must make a good faith effort to ensure that, in the event  
an application does not supply such function or table, the facility still operates, and  
performs whatever part of its purpose remains meaningful.  
(For example, a function in a library to compute square roots has a purpose that is entirely  
well-defined independent of the application. Therefore, Subsection 2d requires that any  
application-supplied function or table used by this function must be optional: if the  
application does not supply it, the square root function must still compute square roots.)  
These requirements apply to the modified work as a whole. If identifiable sections of that  
work are not derived from the Library, and can be reasonably considered independent and  
separate works in themselves, then this License, and its terms, do not apply to those sections  
66  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
when you distribute them as separate works. But when you distribute the same sections as  
part of a whole which is a work based on the Library, the distribution of the whole must be  
on the terms of this License, whose permissions for other licensees extend to the entire  
whole, and thus to each and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written  
entirely by you; rather, the intent is to exercise the right to control the distribution of  
derivative or collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the Library (or  
with a work based on the Library) on a volume of a storage or distribution medium does not  
bring the other work under the scope of this License.  
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this  
License to a given copy of the Library. To do this, you must alter all the notices that refer to  
this License, so that they refer to the ordinary GNU General Public License, version 2, instead  
of to this License. (If a newer version than version 2 of the ordinary GNU General Public  
License has appeared, then you can specify that version instead if you wish.) Do not make  
any other change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU  
General Public License applies to all subsequent copies and derivative works made from that  
copy.  
This option is useful when you wish to copy part of the code of the Library into a program  
that is not a library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in  
object code or executable form under the terms of Sections 1 and 2 above provided that you  
accompany it with the complete corresponding machine-readable source code, which must  
be distributed under the terms of Sections 1 and 2 above on a medium customarily used for  
software interchange.  
If distribution of object code is made by offering access to copy from a designated place,  
then offering equivalent access to copy the source code from the same place satisfies the  
requirement to distribute the source code, even though third parties are not compelled to  
copy the source along with the object code.  
5. A program that contains no derivative of any portion of the Library, but is designed to  
work with the Library by being compiled or linked with it, is called a “work that uses the  
Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls  
outside the scope of this License.  
However, linking a “work that uses the Library” with the Library creates an executable that is  
a derivative of the Library (because it contains portions of the Library), rather than a “work  
that uses the library. The executable is therefore covered by this License. Section 6 states  
terms for distribution of such executables.  
When a “work that uses the Library” uses material from a header file that is part of the  
Library, the object code for the work may be a derivative work of the Library even though the  
source code is not. Whether this is true is especially significant if the work can be linked  
without the Library, or if the work is itself a library. The threshold for this to be true is not  
precisely defined by law.  
If such an object file uses only numerical parameters, data structure layouts and accessors,  
and small macros and small inline functions (ten lines or less in length), then the use of the  
object file is unrestricted, regardless of whether it is legally a derivative work. (Executables  
containing this object code plus portions of the Library will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for  
the work under the terms of Section 6. Any executables containing that work also fall under  
Section 6, whether or not they are linked directly with the Library itself.  
6. As an exception to the Sections above, you may also combine or link a “work that uses the  
Library” with the Library to produce a work containing portions of the Library, and distribute  
that work under terms of your choice, provided that the terms permit modification of the  
work for the customer's own use and reverse engineering for debugging such modifications.  
You must give prominent notice with each copy of the work that the Library is used in it and  
that the Library and its use are covered by this License. You must supply a copy of this  
License. If the work during execution displays copyright notices, you must include the  
copyright notice for the Library among them, as well as a reference directing the user to the  
copy of this License. Also, you must do one of these things:  
67  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
a) Accompany the work with the complete corresponding machine-readable source code  
for the Library including whatever changes were used in the work (which must be  
distributed under Sections 1 and 2 above); and, if the work is an executable linked with  
the Library, with the complete machine-readable “work that uses the Library, as object  
code and/or source code, so that the user can modify the Library and then relink to  
produce a modified executable containing the modified Library. (It is understood that  
the user who changes the contents of definitions files in the Library will not necessarily be  
able to recompile the application to use the modified definitions.)  
b) Use a suitable shared library mechanism for linking with the Library. A suitable  
mechanism is one that (1) uses at run time a copy of the library already present on the  
user's computer system, rather than copying library functions into the executable, and (2)  
will operate properly with a modified version of the library, if the user installs one, as long  
as the modified version is interface-compatible with the version that the work was made  
with.  
c) Accompany the work with a written offer, valid for at least three years, to give the same  
user the materials specified in Subsection 6a, above, for a charge no more than the cost of  
performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated place,  
offer equivalent access to copy the above specified materials from the same place.  
e) Verify that the user has already received a copy of these materials or that you have  
already sent this user a copy.  
For an executable, the required form of the “work that uses the Library” must include any  
data and utility programs needed for reproducing the executable from it. However, as a  
special exception, the materials to be distributed need not include anything that is normally  
distributed (in either source or binary form) with the major components (compiler, kernel,  
and so on) of the operating system on which the executable runs, unless that component  
itself accompanies the executable.  
It may happen that this requirement contradicts the license restrictions of other proprietary  
libraries that do not normally accompany the operating system. Such a contradiction means  
you cannot use both them and the Library together in an executable that you distribute.  
7. You may place library facilities that are a work based on the Library side-by-side in a single  
library together with other library facilities not covered by this License, and distribute such a  
combined library, provided that the separate distribution of the work based on the Library  
and of the other library facilities is otherwise permitted, and provided that you do these two  
things:  
a) Accompany the combined library with a copy of the same work based on the Library,  
uncombined with any other library facilities. This must be distributed under the terms of  
the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work  
based on the Library, and explaining where to find the accompanying uncombined form  
of the same work.  
8. You may not copy, modify, sublicense, link with, or distribute the Library except as  
expressly provided under this License. Any attempt otherwise to copy, modify, sublicense,  
link with, or distribute the Library is void, and will automatically terminate your rights under  
this License. However, parties who have received copies, or rights, from you under this  
License will not have their licenses terminated so long as such parties remain in full  
compliance.  
9. You are not required to accept this License, since you have not signed it. However, nothing  
else grants you permission to modify or distribute the Library or its derivative works. These  
actions are prohibited by law if you do not accept this License. Therefore, by modifying or  
distributing the Library (or any work based on the Library), you indicate your acceptance of  
this License to do so, and all its terms and conditions for copying, distributing or modifying  
the Library or works based on it.  
10. Each time you redistribute the Library (or any work based on the Library), the recipient  
automatically receives a license from the original licensor to copy, distribute, link with or  
modify the Library subject to these terms and conditions. You may not impose any further  
restrictions on the recipients' exercise of the rights granted herein.  
You are not responsible for enforcing compliance by third parties with this License.  
68  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
11. If, as a consequence of a court judgment or allegation of patent infringement or for any  
other reason (not limited to patent issues), conditions are imposed on you (whether by court  
order, agreement or otherwise) that contradict the conditions of this License, they do not  
excuse you from the conditions of this License. If you cannot distribute so as to satisfy  
simultaneously your obligations under this License and any other pertinent obligations, then  
as a consequence you may not distribute the Library at all. For example, if a patent license  
would not permit royalty-free redistribution of the Library by all those who receive copies  
directly or indirectly through you, then the only way you could satisfy both it and this  
License would be to refrain entirely from distribution of the Library.  
If any portion of this section is held invalid or unenforceable under any particular  
circumstance, the balance of the section is intended to apply, and the section as a whole is  
intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property  
right claims or to contest validity of any such claims; this section has the sole purpose of  
protecting the integrity of the free software distribution system which is implemented by  
public license practices. Many people have made generous contributions to the wide range  
of software distributed through that system in reliance on consistent application of that  
system; it is up to the author/donor to decide if he or she is willing to distribute software  
through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of  
the rest of this License.  
12. If the distribution and/or use of the Library is restricted in certain countries either by  
patents or by copyrighted interfaces, the original copyright holder who places the Library  
under this License may add an explicit geographical distribution limitation excluding those  
countries, so that distribution is permitted only in or among countries not thus excluded. In  
such case, this License incorporates the limitation as if written in the body of this License.  
13. The Free Software Foundation may publish revised and/or new versions of the Lesser  
General Public License from time to time. Such new versions will be similar in spirit to the  
present version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Library specifies a version  
number of this License which applies to it and “any later version, you have the option of  
following the terms and conditions either of that version or of any later version published by  
the Free Software Foundation. If the Library does not specify a license version number, you  
may choose any version ever published by the Free Software Foundation.  
14. If you wish to incorporate parts of the Library into other free programs whose  
distribution conditions are incompatible with these, write to the author to ask for  
permission. For software which is copyrighted by the Free Software Foundation, write to the  
Free Software Foundation; we sometimes make exceptions for this. Our decision will be  
guided by the two goals of preserving the free status of all derivatives of our free software  
and of promoting the sharing and reuse of software generally.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE  
LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE  
LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULARPURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND  
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE,  
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL  
ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE  
THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY  
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE  
OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA  
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A  
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER  
OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
69  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Disclaimer  
This Insignia product may contain content and/or services that belong to  
a third party. Such third party content and/or service may only be used in  
compliance with the terms and conditions that govern such use. Unless  
expressly authorized by the applicable third party's terms of use, you may  
not modify, copy, republish, upload, post, transmit, translate, sell, create  
derivative works, exploit, or distribute in any manner or medium any third  
party content or service displayed through the Insignia product.  
All third party content or service is provided “as is.Third party content or  
service may be terminated or interrupted at any time. Insignia has no  
control over the networks and transmission facilities that third party  
content and services are transmitted through. Any question or request  
regarding third party content or services should be made directly to the  
applicable third party. INSIGNIA EXPRESSLY DISCLAIMS ANY  
RESPONSIBILITY OR LIABILITY FOR ANY AVAILABILITY, INTERRUPTION OR  
SUSPENSION OF ANY THIRD PARTY CONTENT OR SERVICE MADE  
AVAILABLE THROUGH THE INSIGNIA PRODUCT. INSIGNIA DOES NOT  
WARRANT OR MAKE ANY REPRESENTATION, WHETHER EXPRESS OR  
IMPLIED, ABOUT THE SUBSTANCE, QUALITY, FUNCTIONALITY, ACCURACY,  
VALIDITY, TIMELINESS, SUITABILITY, AVAILABILITY, COMPLETENESS,  
FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY OR ANY OTHER  
REPRESENTATION ABOUT SUCH CONTENT OR SERVICES. INSIGNIA  
EXPRESSLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING  
BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES, INCLUDING  
NEGLIGENCE, SHALL INSIGNIA BE LIABLE, WHETHER IN CONTRACT OR  
TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR  
CONSEQUENTIAL DAMAGES, ATTORNEY FEES, COSTS, EXPENSES, OR ANY  
OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OF  
ANY THIRD PARTY CONTENT OR SERVICES, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
70  
 
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
One-year limited warranty  
Insignia Products (“Insignia”) warrants to you, the original purchaser of this new product  
(“Product”), that the Product shall be free of defects in the original manufacture of the  
material or workmanship for a period of one (1) year from the date of your purchase of the  
Product (“Warranty Period”). This Product must be purchased from an authorized dealer of  
Insignia brand products and packaged with this warranty statement. This warranty does not  
cover refurbished Product. If you notify Insignia during the Warranty Period of a defect  
covered by this warranty that requires service, terms of this warranty apply.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. The  
purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or workmanship of  
the Product is determined to be defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or  
(2) replace the Product at no charge with new or rebuilt comparable products or parts.  
Products and parts replaced under this warranty become the property of Insignia and are  
not returned to you. If service of Products or parts are required after the Warranty Period  
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your  
Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or  
otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a retail store location, take your original receipt and the  
Product to the store you purchased it from. Make sure that you place the Product in its  
original packaging or packaging that provides the same amount of protection as the original  
packaging. If you purchased the Product from an online web site, mail your original receipt  
and the Product to the address listed on the web site. Make sure that you put the Product in  
its original packaging or packaging that provides the same amount of protection as the  
original packaging.  
To obtain in-home warranty service for a television with a screen 30 inches or larger, call  
1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will have  
an Insignia-approved repair person dispatched to your home. Should the Insignia-approved  
repair person not correct the issue on the first call, an Insignia television (size and features to  
be determined by Insignia) will be loaned to you until your TV is repaired and returned, at no  
charge to you. This feature is only available to Insignia television consumers residing in the  
United States.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the product in the United States,  
Canada, and Mexico.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as lightning strikes  
Accident  
Misuse  
71  
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player  
Abuse  
Negligence  
Commercial use  
Modification of any part of the Product, including the antenna  
Plasma display panel damaged by static (non-moving) images applied for lengthy  
periods (burn-in).  
This warranty also does not cover:  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage supply  
Attempted repair by anyone other than a facility authorized by Insignia to service the  
Product  
Products sold as is or with all faults  
Consumables, such as fuses or batteries  
Products where the factory applied serial number has been altered or removed  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.  
INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR  
THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT  
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST  
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO  
THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING,  
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION  
TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS  
OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND  
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY  
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM  
STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2010 BBY Solutions, Inc.  
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some  
countries. All other products and brand names are trademarks of their respective owners.  
72  
(877) 467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, MN USA 55423-3645  
© 2010 BBY Solutions, Inc.  
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.  
Registered in some countries.  
All other products and brand names are trademarks of their respective owners.  
ENGLISH  
10-0919  

Audiovox CommanderMT 128 7902A User Manual
Cambridge Audio AZUR 651 User Manual
Canon EOS C100 7428B006 User Manual
CBC ZN L8000 User Manual
Creative Sound BlasterAxx SB1390 (SBX10) User Manual
Dell Car Video System E2313H User Manual
Gitzo GT1940C User Manual
Jensen Car Stereo System MCD5112 User Manual
Jensen Car Video System MVB85A User Manual
JVC GR DVL865 User Manual