In Tech electronic BT65N User Manual

E
A
D
B
C
8
8
210.00 mm  
7
7
(Fig.2)  
5. Backward switch.(only applied to audio devices supporting A2DP and AVRCP  
Profiles)  
6. Bluetooth Volume Down switch.  
7. Forward switch. (only applied to audio devices supporting A2DP and AVRCP  
Profiles)  
8. Bluetooth ON/OFF/Pairing/Pause switch.  
a) When BT90S is powered on, press and hold (about 2 seconds) until  
Bluetooth LED flashes Green to turn Bluetooth ON.  
b) When BT90S is powered on, press and hold (about 4 seconds) until  
Bluetooth LED flashes Green and Red alternatively to enter into pairing mode.  
BT90S Bluetooth Traveller Speaker  
And  
c) When BT90S is powered on, press and hold (about  
Bluetooth LED turns red to turn Bluetooth OFF when playing.  
d) Press it once when playing --- Pause  
Press it once again --- Resume play  
9. Bluetooth Volume Up switch.  
4
seconds) until  
BT65N Bluetooth Audio Adaptor (optional)  
6
6
User Manual  
(Fig.3)  
Environmental  
friendly  
10. a) Bluetooth LED flashes Green -- Bluetooth is ON  
b) Bluetooth LED flashes Green and Red alternatively -- Bluetooth enters into  
Pairing mode  
c) Bluetooth LED is red -- Bluetooth will be powered OFF  
11. Power LED is Blue -- BT90S is Power ON  
5
5
I.Traveller Speaker paired with Bluetooth enabled (with A2DP and  
AVRCP profiles) Mobile Phone / PDA / MP3 Guide  
2
When you purchase a Standalone pack with BT90S Traveller Speaker only,  
please follow this Guide.  
Index  
1. A/C Adapter and 3 AAA battery...............................................................1  
2. Turning on / Turning off the Traveller Speaker and the Audio Adaptor.........1  
3. Function Keys......................................................................................1  
4
4
THREE possible User Scenarios.........................................................................2  
I. Traveller Speaker paired with Bluetooth enabled (with A2DP and AVRCP  
profile) Mobile Phone  
/
PDA  
/
MP3 Guide........................................2  
1.Pairing..............................................................................................3  
2.Listening to music..............................................................................3  
Bluetooth Traveller Speaker  
Bluetooth enabled PDA  
Bluetooth mobile phone  
(Fig.4)  
II. Traveller Speaker paired with Stereo Audio Adaptor BT65N Guide...........4  
1.Pairing...............................................................................................4  
2.istening to music..............................................................................5  
1. Pairing  
a. While the Speaker is powered off, switch the power ON/OFF switch (Key  
2) to the “I” position to turn it on (Fig.1). The Power LED (Fig.3) will  
become blue. Press and hold BT ON/OFF/Pairing/Pause switch (Key 5,  
III. Traveller Speaker connected directly with Audio Device Guide................5  
1.listening to music..............................................................................5  
Fig.2) for  
4
seconds, the Bluetooth LED will flash red and green  
alternatively, which indicates the Speaker in Pairing Mode. The Pairing  
Mode will last for one minute.  
Accessories Table...............................................................................5  
FCC Interference Statement........................................................................6  
b. Put the Speaker and the Bluetooth enabled (with A2DP and AVRCP  
profiles) Mobile Phone / PDA / MP3 close to each other, 0.5 to 3 meters.  
c. Follow the operation instructions of your Bluetooth enabled (with A2DP  
and AVRCP profiles) Mobile Phone/ PDA / MP3 to start the pairing  
process. Typically, this has to be done by going to a setup or connect  
menu to discover the Speaker. It may take some time to search it  
depending on the number of Bluetooth devices nearby.  
d. Your Mobile Phone / PDA / MP3 will display the model name “BT90S“ if it  
has found the Speaker; and ask for a passkey. Enter a sequence of  
“0000“. After successful pairing, follow the instructions to establish the  
Bluetooth connection with the Speaker.  
e. If the pairing is successful, the Bluetooth LED will flash green, which  
indicates it is in Standby Mode and ready to receive audio signals from the  
Mobile Phone / PDA / MP3. If pairing does not occur as expected, turn the  
Traveller Speaker and the audio device off. Wait for 10 seconds and  
repeat the pairing process from the beginning (Fig.4).  
3
3
!
A/C Adapter and 3 AAA battery  
Thank you for buying the new BT90S Bluetooth Traveller Speaker and, or the  
BT65N Bluetooth Stereo Audio Adaptor. You can use the A/C power adapter  
(optional, not provided) to power up the BT90S directly or place 3 AAA dry  
batteries into the BT90S to obtain the power.  
!
!
Turning on / Turning off the Traveller Speaker  
To turn on the speaker, please switch the power ON/OFF switch to the “I”  
position. To turn it off, please switch the power switch to the “O” position.  
Function Keys  
1. Battery cover(Insert 3 AAA batteries).  
2. Power ON/OFF switch.  
3. DC power input socket(5VDC).  
4. Audio input socket.  
2. Listening to music  
a. Play the music on the Mobile Phone / PDA / MP3 as normal; you will listen  
to the music from the Speaker.  
2
2
b. The speaker volume can be adjusted by pressing the VOL Up button  
(Fig.2) / VOL Down button (Fig.2).  
(Fig.1)  
1
3
Note:  
MATERIAL:  
SIZE:  
8042  
MCB-8042010-0A  
1
1
Lucy  
2006/03/07  
OTHER:  
#8042 USER MANUAL  
MM  
A3  
E
A
B
C
D

AMS 1084 User Manual
Arcam CD37 User Manual
Becker Designed Car Stereo System 1480 User Manual
Blaupunkt COBURG RCR 168 User Manual
Canon EE28 User Manual
Canon Speedlite Flash 600EX User Manual
Dynex DX DA100501 User Manual
Gitzo G1327 User Manual
JBL GTO1502D User Manual
JVC GR DVL707 User Manual