62A00-1
Hi-Fi by HAI
Technical Sheet
A Revolutionary Whole Home Audio System
Hi-Fi by HAI allows you
to share your music
What Makes Hi-Fi Revolutionary?
Controlling
Hi-Fi couldn’t be
throughout your home,
using the sources you already own!
Traditional Whole Home Audio
Systems require your music source
equipment to be in a central audio
rack and many of them require this
source equipment to be proprietary
brands. Hi-Fi allows you to listen to
the music sources that you already
own or any brand that you wish
to purchase. These sources can be
located thoughout the house.
easier. There are
no confusing
buttons, just one
Mom can listen
to relaxing jazz
on the satellite
radio in the
kitchen, while
dad listens to
the big game as
he barbeques
knob and a display. Simply mount
a Volume-Source Control (VSC) in
any room that has speakers that
you wish to control. The VSC gives
you the ability to play any music
that’s connected to a RIM - no
matter if the RIM is in the same
room or not!
outside, and the
kids jam away
How Is This Done?
Using the VSC is Easy
to rock upstairs!
Or set them all
to listen to the same source and
volume.
The main controller
of your Hi-Fi is
mounted in a closet
or basement. Remote
Input Modules
• Turn the knob to adjust
volume.
• Press the knob to change the
source.
With Hi-Fi by HAI, you have the
ability to listen to different sources
at the same time at different
volume levels throughout your
home. Hi-Fi comes standard as
a four zone, four source kit, and
is expandable to eight zones, six
sources.
(RIMs) are installed
in rooms that have
• Press and hold the knob to
music sources, such as CD players,
computers, iPods™, satellite radios,
TVs, etc. The sources are plugged
into the RIMs and voila - you can
now enjoy your favorite tunes in
any room!
alter bass, treble, or to turn
the entire system on/off.
The VSC and RIM come in White,
but are also available in Almond,
Black, and Ivory.
1
Connect Hi-Fi to an HAI Home
Control System
Technical Specifications
Hi-Fi by HAI may be used as a
stand-alone system or with an HAI
home control system. With a home
control system, you may coordinate
your music with activities in the
home.
Power is 40 watts RMS per zone at
4 ohms. The audio signal from the
source is inputed at the RIM and
travels over Cat 5 to the main unit.
The VSC is also connected to the
main unit using Cat 5.
Easy to Operate. A single
knob controls volume, source
and more! No programming
required.
• Set every room to the iPod™
and preset the volumes for a
party.
Affordable High Fidelity
Performance. Clear and
powerful Class D digital
amplifiers. Plus, it’s a modular
system so it’s easy to expand
at a later date.
The Class D digital amplifiers are in
the main unit, (not in the VSC) so
amplifier power is not hindered by
Cat 5 wire. Speakers are connected
to the main unit using standard 16
gauge speaker wire. There are two
variable outputs (Zones 1 and 8)
for connection to external power
amplifiers, and a page/mute input.
• Mute bedroom and outdoor
zones when it’s bedtime.
• Turn the entire system off when
leaving the house.
First System with Remote
Input Modules. Enjoy music
from sources throughout
the house. No audio rack
required.
• Use your telephone to page
throughout the house.
Signals from remote controls are
picked up by a sensor in the VSC
and routed to the RIM that the VSC
has selected as its source. Signals
for source equipment are sent out
the “IR Out” port on the RIM to
control the source.
Use any of HAI’s user interfaces to
control Hi-Fi, including OmniTouch
Touchscreens, consoles, keypads,
Snap-Link, Home Control for
Windows® Media Center, and
Web-Link II.
A demo for Hi-Fi is available on HAI’s
Website. Complete with sound, the
interactive demonstration shows the
benefits of Hi-Fi and how it works in
a home!
Graphically Control Hi-Fi When Connected to an HAI
Home Control System
Control Hi-Fi wirelessly
via Snap-Link on an
Ultra Mobile PC.
Control the volume and
source of any zone with an
OmniTouch Touchscreen.
3
RIM
VSC
• Remote Input Module - allows any
source from anywhere in the house to
be listened to in any or all zones. It also
has an IR emitter port for routed IR
commands from the VSC.
• Volume-Source Control - control
volume and select source, in addition
to adjusting bass, treble, balance, and
source gain. It also has an infrared
receiver.
• Use CAT-5 cable from the RIM to Remote
Audio In on the Hi-Fi.
• Use CAT-5 cable from the VSC to Zone
Control In on the Hi-Fi.
• Maximum of six RIM's.
• Maximum of eight VSC's
IR OUT
IR OUT
VOLUME
VOLUME
AUDIO IN
AUDIO IN
Hi-Fi RIM
Remote Input Module
Hi-Fi RIM
Remote Input Module
PUSH TO SELECT
PUSH TO SELECT
VSC
VSC
RIM
RIM
Connect to HAI controller to select
zone and source, and control
volume and power from an
OmniTouch Touchscreen or via
controller program.
HAI CONTROLLER
(OPTIONAL)
TO SERIAL PORT ON HAI
CONTROLLER
Hi-Fi has 2 variable
outputs (Zone 1 and Zone
8) that allow you to deliver
more power to the zone
speakers through optional
power amplifiers.
SPEAKERS
One 62A07-1 Power Supply is used to
power Zones 1-4. A second 62A07-1
Power Supply is used to power Zones 5-8.
POWER AMPLIFIER
(OPTIONAL)
Use 16 gauge
speaker wire (4
conductor stranded is
suggested for neat
installation)
POWER SUPPLY
HAI Part Number: 62A07-1
Universal Power Supply for Hi-Fi
For Zones 1-4
(Supplied with 4 Zone, 4 Source Kit)
POWER SUPPLY
HAI Part Number: 62A07-1
Universal Power Supply for Hi-Fi
For Zones 5-8
(up to 8 Zones)
Zone 1
Zone 2
Zone 3
(Speakers)
(Speakers)
(Speakers)
(Supplied with Hi-Fi Expansion Kit)
4
Hi-Fi by HAI PARTS LIST
Controllers:
Accessories:
Description
Part #
Description
Part #
Hi-Fi by HAI 4 Zone, 4 Source Kit in
Vented Enclosure
Hi-Fi by HAI Zone Amplifier
Card (ZAC)
62A02-1
62A00-1
Hi-Fi by HAI 4 Zone, 4 Source Kit for
Structured Wiring Enclosures
Hi-Fi by HAI Volume-Source
Control (VSC)
62A03-1
62A04-1
62A00-2
62A01-1
62A12-1
Hi-Fi by HAI 4 Zone, 4 Source Main
Assembly
Hi-Fi by HAI Remote Input
Module (RIM)
Hi-Fi by HAI Expansion Kit (to 8
zone 6 source)
Hi-Fi by HAI Remote Control
62A05-1
Hi-Fi by HAI Programmable
Remote Control
62A06-1
Hi-Fi by HAI Power Supply
Hi-Fi by HAI IR Flasher
62A07-1
62A08-1
Hi-Fi by HAI Vented Enclosure
62A09-1
Hi-Fi by HAI RIM Color Change Kit,
Almond, case of 12
62A10-ALCS
62A10-BLCS
62A10-IVCS
62A10-WHCS
62A11-ALCS
62A11-BLCS
62A11-IVCS
62A11-WHCS
62A13-1
Hi-Fi by HAI RIM Color Change Kit,
Black, case of 12
Hi-Fi by HAI RIM Color Change Kit,
Ivory, case of 12
62A00-2
Hi-Fi by HAI RIM Color Change Kit,
White, case of 12
Hi-Fi by HAI includes Hi-Fi Main Board
Assembly with four installed Zone
Apmplifier Cards with Vented Enclosure
(62A00-1) or on backplate for Structured
Wiring Enclosures (62A00-2), four
Remote Input Modules, four Volume-
Source Controls, Power Supply, one
62A05-1 Remote Control, cable for HAI
controllers, and manuals.
Hi-Fi by HAI VSC Color Change Kit,
Almond, case of 12
Hi-Fi by HAI VSC Color Change Kit,
Black, case of 12
Hi-Fi by HAI VSC Color Change Kit,
Ivory, case of 12
Hi-Fi by HAI VSC Color Change Kit,
White, case of 12
Hi-Fi by HAI Retractable Cables
(3.5mm to two RCA)
Hi-Fi by HAI Retractable Cables
(3.5mm male to 3.5mm male)
62A14-1
5
|