GE 681131691192 User Manual

BLender  
model number: 169119  
uPC: 681131691192  
Customer assistance  
1-877-207-0923 (us)  
1-877-556-0973 (Canada)  
Thank you for purchasing a Ge small appliance.  
in keeping with the Ge ecomagination initiative, please consider the option to  
recycle the packaging material and donate the appliance you are no longer using.  
to read about Ges ecomagination commitment, visit  
http://ge.ecomagination.com  
this appliance has a 3-prong grounding type plug to reduce the risk of electric  
shock. if the power-supply cord is a grounding-type 3-wire cord with a grounding  
prong on the plug, the extension cord should also be a grounding-type 3-wire  
cord.  
Grounding instructions  
this appliance must be grounded while in use to protect the operator from  
electrical shock. the appliance is equipped with a 3-conductor cord and a 3-prong  
grounding-type plug to fit the proper grounding-type receptacle.  
PArts  
1. measuring cup  
2. Lid  
3. Glass jar  
4. Blade  
5. Base  
6. Control Panel  
7. sealing ring  
8. Blade base  
9. Blade locking ring  
10. stainless jar collar  
3
oPerAtinG instruCtions  
the blender can be sued for pureeing and for blending. if necessary, cut solid  
ingredients into smaller pieces before you put them in the blender.  
For your safety, always read and understand this instruction manual before  
attempting to use any electric appliance.  
Before using:  
1. Carefully unpack the blender. remove all packaging materials.  
2. Wash the lid, measuring cap, blade assembly, and glass jar in hot soapy water.  
Dry thoroughly.  
3. Wipe exterior surfaces of the base with a soft, moist cloth to remove residue  
that may have collected during packing and handling. Dry thoroughly. Do not  
use abrasive cleaners. never immerse tHe BLenDer, CorD or PLuG in WAter  
or AnY otHer LiQuiD.  
Blade assembly:  
1. Line up the two round indentions on the metal jar collar with the to round  
bumps on the glass blending jar.  
2. Place the silicone sealing ring on the bottom of the glass jar.  
3. Angle the blade assembly so one of the taller blades goes into the glass jar.  
slowly lower the blade assembly so that the other blades enter the glass jar and  
the blade assembly sits flat on top of the silicone sealing ring.  
4. Place the black locking ring around the blade assembly and rotate the black  
locking ring clockwise until it is tightened.  
note: if you notice liquid leaking from the bottom of the glass blending jar, remove  
the black locking ring and re-tighten it.  
this blender is equipped with cord storage located on the bottom of the appliance.  
Blending:  
1. Add ingredients to the blending jar.  
2. Place lid on blending jar. make sure the metal jar collar is properly seated on the  
die cast base.  
3. Plug the power cord into a wall outlet. the LCD will read power “onindicating  
the blender is ready for operation.  
4. to stop blending, Press the “stoP” button  
4
Tips:  
1. the opening in the lid can be used to add ingredients. to do so, remove the  
measuring cap from the lid.  
2. it may be necessary to switch off the appliance from time to time to remove  
pieces of food stick to the inside of the blender jar.  
—switch off the appliance and unplug it.  
remove the lid.  
remove pieces sticking to the inside of the glass with a soft spatula.  
Keep the spatula at a distance from the blade.  
3. When finished blending, unplug the appliance and remove the glass jar.  
CLeAninG AnD storAGe  
To Clean:  
1. Before cleaning, be sure the cord is unplugged from the outlet.  
2. to make cleaning easier, rinse the center measuring cup and jar lid immediately  
after use. Do not immerse the base in water or any liquid. if washing the jar by  
hand, wash in warm soapy water. rinse and dry thoroughly. if necessary, use a  
nylon bristle brush to clean the glass jar.  
3. Do not use scouring pads or harsh chemicals on any plastic or metal parts.  
4. Do not fill the jar with boiling water. Do not place any parts in boiling water.  
5. remove the cast metal jar collar off the glass blending jar.  
the glass jar is dishwasher safe. it is recommended to clean all other parts of the  
blade assembly by hand with warm, soapy water and dry with a towel or allow to  
air dry. use caution when washing and cleaning the blade assembly as the blades  
are sharp.  
To store:  
Be sure all parts are clean and dry before storing. store appliance in its box or in a  
clean, dry place. never wrap cord tightly around the appliance; keep it loosely  
coiled or use the cord storage on the bottom of the blender.  
5
Customer AssistAnCe  
For faster service, please have the model number and product name ready for the  
operator to assist you. this number can be found on the bottom of your appliance and  
on the front page of this manual.  
model number: ____________________ Product name:_________________________  
Customer Assistance number 1-877-207-0923 (u.s.) or 1-877-556-0973 (Canada)  
Keep these numbers for future reference!  
For more information, please visit us at www.gehousewares.com  
How does state law relate to this  
Two-Year LimiTed warranTY  
warranty?  
what does your warranty cover?  
this warranty gives you specific legal  
rights, and you may also have other  
rights which vary from state to state  
or province to province.  
• Any defect in material or workmanship.  
For how long after the original purchase?  
two years.  
this warranty is in lieu of any other  
warranty or condition, whether express  
or implied, written or oral, including,  
without limitation, any statutory  
warranty or condition of merchantability  
or fitness for a particular purpose.  
what will we do?  
• Provide you with a new one.  
• For those items still under warranty but  
no longer available, WAL-mArt reserves  
the right to replace with a similar Ge  
branded product of equal or greater value.  
• WAL-mArt, Ge and the product  
manufacturer expressly disclaim all  
responsibility for special, incidental and  
consequential damages or losses caused  
by use of this appliance. Any liability is  
expressly limited to an amount equal to  
the purchase price paid whether a claim,  
however instituted, is based on contract,  
indemnity, warranty, tort (including  
negligence), strict liability, or otherwise.  
some states or provinces do not allow  
this exclusion or limitation of incidental  
or consequential losses so the foregoing  
disclaimer may not apply to you.  
How do you make a warranty claim?  
• save your receipt.  
• Properly pack your unit. We recommend  
using the original carton and packing  
materials.  
return the product to your nearest  
WAL-mArt store or call Customer  
Assistance at 1-877-207-0923 (u.s.)  
or 1-877-556-0973 (Canada).  
what does your warranty not cover?  
• Parts subject to wear, including, without  
limitation, glass parts, glass containers,  
cutter/strainer, blades, seals, gaskets,  
clutches, motor brushes, and/or  
agitators, etc.  
• Commercial use or any other use not  
found in printed directions.  
• Damage from misuse, abuse, or neglect,  
including failure to clean product  
regularly in accordance with  
what if you encounter a problem with  
this product while using it outside the  
country of purchase?  
the warranty is valid only in the country  
of purchase and you follow the warranty  
claim procedure as noted.  
manufacturer’s instructions.  
marketed in Canada by:  
Wal-mart Canada Corp.  
1940 Argentia road, mississauga, ontario L5n1P9  
is a trademark of General electric  
Company and is used under the  
license by Wal-mart stores inc.,  
Bentonville, Ar 72716  

Arcam DiVA Ampliers A65 User Manual
Ariston 24 MFFI User Manual
Black Box Cable Box QCE12U User Manual
Burnham ALP080 User Manual
Canon Camcorder HV20 User Manual
Cateye CYCLOCOMPUTER CCAT2W 090526 User Manual
Citizen Calculator SDC 8780LII User Manual
Edelbrock 4779 User Manual
Jensen Tools Mobile Receiver User Manual
JVC GR DVP9 User Manual