MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE)
560H SERIES
■ FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.
■ PIN CONNECTOR (PLUG) CONTACT LENGTH
■ SPECIFICATIONS
Contact type
Pin No.
Contact length
Specification
Item
Power, ground pins 1, 17, 34, 35, 51, 68 5.0 mm (0.196 in.)
– 55°C to + 85°C
Operating temperature range
Current rating
Card detection pins
Other signal pins
36, 67
Others
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
DC 0.5 A
AC 250 V
Voltage rating
40 mΩ max (6 VDC, 0.1 A)
1000 MΩ min. (500 VDC)
500 VAC for 1 minute
Industrial environment: 5,000 times
Office environment: 10,000 times
Contact resistance
■ MATERIALS
Insulation resistance
Dielectric withstanding voltage
Insertion/withdrawal life
Specification
Item
Plug body: PPS resin UL94V-0
: 6T nylon (for type III card connector) UL94V-0
Ejector: Polyester
Insulating material
:
PPS resin (for SMT and type III card connectors)
Copper alloy
Conductor
Plating
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
Specifications
subject to change
Dimensions are in millimeters (inches)
1
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/C-V4
3 (0.118)
50.8 (2)
2.5mm (0.098)
deep spot facing
41.91 (1.65)
2- ø 2.8 (0.110)
1.27 (0.05)
59.7(2.35)
50.8 (2)±0.1 (0.0039)
No.1
No.2
41.91 (1.65)
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
7 (0.276)
1.27 (0.05)
No.17
No.1
No.34
No.51
1.905 (0.075)±0.05 (0.0020)
No.68
3.810 (0.15)±0.05 (0.0020)
5.715 (0.225)±0.05 (0.0020)
68- ø 1 (0.039)±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
(Card insertion side)
No.68 Unit: mm (in.)
No.35
•
Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)
FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board)
• Long-terminal models are also available.
Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.))
FCN-565P068-G/02-V4 (10 mm (0.394 in.))
Part number: FCN-565P068-G/17-V4
• Models which support Type III are also available.
FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm
(0.063 in.) thick PC board )
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, LOW-PROFILE TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/01-V4
50.8 (2)
3
(0.118)
4
2.5mm (0.098)
deep spot facing
1.27 (0.05) × (34-1) = 41.91 (1.65)
(0.157)
1.27 (0.05)
3.6 (0.141)
58.7 (2.31)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (34-1) = 41.91 (1.65)
No.1
No.2
41.91(1.65)±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
1.27 (0.05)
No.1
No.34
1.905 (0.075) ±0.05 (0.0020)
No.68
3.810 (0.15) ±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
No.35
No.68
68- ø 1 (0.039)±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
(Card insertion side)
Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm.
In order to avoid damage to the connector, do not pull out the card at an angle.
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
3
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON
THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/F-V4
(2) M2.5 (0.098 in.)
thread nut
59.7 (2.35)
50.8 (2)
7 (0.276)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
2.5
1.27 (0.05)
(0.098)
<To be mounted on back of PC board>
50.8 (2)±0.05 (0.0039)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.68
No.35
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
No.68
No.51
No.35
No.34
2- ø 2.8 (0.110)
No.1
1.905 (0.075)±0.05 (0.0020)
3.810 (0.15)±0.05 (0.0020)
5.715 (0.225)±0.05 (0.0020)
68- ø 1 (0.039)±0.05 (0.0020)
No.34
No.17
No.1
(Card insertion side)
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4
Unit: mm (in.)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING
TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD)
Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)
3 (0.118)
59.7 (2.35)
50.8 (2)
4.5 (0.177)
50.8 (2) ±0.1 (0.0039)
No.1
No.2
7 (0.276)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
1.27 (0.05)
No.1
No.17
No.34
No.68
8.5
1.905 (0.075)±0.05 (0.0020)
3.810 (0.15)±0.05 (0.0020)
5.715 (0.225)±0.05 (0.0020)
±0.05 (0.0020)
68- ø 1 (0.039)
2- ø 2.8 (0.110)±0.1 (0.0039)
No.35
53.7 (2.114)
No.51
No.68
(Card insertion side)
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
4
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/A-V4
50.8 (2)
2.5mm (0.098)
deep spot facing
1.27 (0.05) × (34–1) = 41.91 (1.65)
3 (0.118)
4.5 (0.177)
1.27 (0.05)
50.8 (2)±0.1 (0.0039)
59.7 (2.35)
1.27 (0.05) × (68/2-1) =
No.1
No.34
41.91 (1.65)±0.1 (0.0039)
6 (0.236)
±0.05 (0.0020)
1.27 (0.05)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05)
No.17
No.68
No.1
No.34
No.35
1.905 (0.075)±0.05 (0.0020)
3.810 (0.15)
5.715 (0.225)±0.05 (0.0020)
68- ø 1 (0.039)±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
±0.05 (0.0020)
No.35
No.51
No.68
Unit: mm (in.)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P136-G/0-V4
59.7 (2.35)
7
7
(0.276) (0.276)
50.8 (2)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
No.1
±0.1 (0.0039)
= 41.91 (1.65)
No.1
No.35
No.35
±0.05 (0.0020)
1.27 (0.05)
No.34
No.68
No.34
No.68
No.34
No.68
No.34
No.68
No.1
No.35 136- ø 1 (0.039) ±0.05 (0.0020)
No.1
No.35
2- ø 2.8 (0.110)±0.1 (0.0039)
1.905 (0.075)±0.05 (0.0020)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
5
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/C34-V4
7
(0.276)
3 (0.118)
59.7 (2.35)
50.8 (2)
2.5mm (0.098)
deep spot facing
59 (2.32)
No.1
No.34
Unit: mm (in.)
No.35
No.68
*A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
±0.1 (0.0039)
= 41.91 (1.65)
No.1
No.34
1.27 (0.05) ±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
5.715 (0.225) ±0.05 (0.0020)
68- ø 1 (0.039) ±0.05 (0.0020)
±0.05 (0.0020)
3.810 (0.15)
1.905 (0.075) ±0.05 (0.0020)
No.35
No.68
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
6
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black)
Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black)
Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige)
67.31 (2.65)
7 (0.276)
3 (0.118)
59.7 (2.35)
50.8 (2)
2.5mm (0.098)
deep spot facing
34 (1.339)
4.8 (0.189)
10 (0.394)
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
No.17 No.18 No.34
No.1
Unit: mm (in.)
No.35
No.51 No.52
No.68
A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4,
instead of FCN-565P068-G/XC-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)±0.1 (0.0039)
No.1
41.91 (1.65)±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.2
2- ø 2.8 (0.110)±0.1 (0.0039)
No.3
No.68
34 (1.339)±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
(Card insertion side)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
7
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/MC-V4 (Button color: Black)
Part number: FCN-565P068-G/C22-V4 (Button color: Beige)
67.31 (2.65)
7 (0.276)
3 (0.118)
59.7 (2.35)
50.8 (2)
2.5mm (0.098)
deep spot facing
34 (1.339)
4.8 (0.189)
10 (0.394)
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
No.1 No.17 No.18
No.34
Unit: mm (in.)
No.35
No.51 No.52
No.68
Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of
FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)±0.1 (0.0039)
No.1
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.2
2- ø 2.8 (0.110)±0.1 (0.0039)
No.3
No.68
34 (1.339)±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
(Card insertion side)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
8
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE
MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XF-V4 (Button color: Black)
Part number: FCN-565P068-G/PF-V4 (Button color: Beige)
67.31 (2.65)
7 (0.276)
2.5
59.7 (2.35)
50.8 (2)
2.5mm (0.098)
deep spot facing
34 (1.339)
4.8 (0.189)
10 (0.394)
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
No.35
No.68
No.34
Unit: mm (in.)
No.1
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■ MOUNTING EXAMPLE
50.8 (2)±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.35
Nut buried
No.34
No.1
34 (1.339) ±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
Regardless of how the connector is mounted on the PC
board, a card can be inserted with its face upward.
Ejector button
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
9
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK
MOUNTING TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/W-V4
67.31 (2.65)
59.7 (2.35)
50.8 (2)
3 (0.118)
4.5
2- ø 2.8 (0.110)
(0.177)
34 (1.339)
6 (0.236)
2.5 (0.098)
2.1
(0.083)
5 (0.197)
3 (0.118)
10 (0.394)
42 (1.654)
35.5 (1.398)
78.5 (3.091)
No.1
No.17
No.34
No.68
Unit: mm (in.)
No.35
No.51
2.5 (0.098)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)±0.1(0.0039)
No.1
No.2
41.91 (1.65)±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
±0.05 (0.0020)
5.715 (0.225)
2- ø 2.8 (0.110) ±0.1(0.0039)
68- ø 1 (0.039) ±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
1.905 (0.075) ±0.05 (0.0020)
Unit: mm (in.)
No.68
(Card insertion side)
■ MOUNTING EXAMPLE
Nut
Mounting height
4.5mm(0.177in.)
Nut
M2.5 screw
Unit: mm (in.)
The connector is mounted on a PC board so that only its terminal connection part rests on the board.
Specifications
subject to change
Dimensions are in millimeters (inches)
10
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM
(0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J25-V4 (supports type I, II card)
Part number: FCN-565P068-G/J25-4V (supports type I, II, III card)
59.7 (2.35)
3(0.118)
50.8 (2)
4.5 (0.177)
4.8 (0.189)
10 (0.394)
59 (2.323)
8 (0.315)
42 (1.654)
35.5 (1.398)
No.1
No.34
Unit: mm (in.)
No.35
No.68
8 (0.315)
50.8 (2)
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■ MOUNTING EXAMPLE
50.8 (2)±0.1 (0.0039)
No.1
1.27 (0.05) × (68/2-1)
No.34
±0.1 (0.0039)
= 41.91 (1.65)
1.27 (0.05) ±0.05 (0.0020)
No.68
68- ø 1 (0.0394) ±0.05 (0.0020)
No.35
4 - ø 2.8 (0.110) ±0.1 (0.0039)
51.7 (2.035) +0
–0
61.7 (2.429)
• Components with a height of 4.3 mm (0.169 in.) maximum can
be installed under the connector.
• Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws
(when a 1.6 mm (0.063 in.) thick PC board is used) to mount
the connector to the board.
41.7 (1.642) +0
±0.1 (0.0039)
50.8 (2)
Unit: mm (in.)
–0
61.7 (2.429)
Component mounting is prohibited in the hatched areas.
Specifications
subject to change
Dimensions are in millimeters (inches)
11
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm
(0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/0442-E4 (with FG clip)
Part number: FCN-565P068-G/0426-V4 (with no FG clip)
3 (0.118)
5 (0.197)
59.7 (2.35)
50.8 (2)
3 (0.118)
5 (0.197)
59.7 (2.35)
50.8 (2)
12.9
12.9
4.8 (0.189)
4.8 (0.189)
10 (0.394)
10 (0.394)
71.85 (2.83)
59 (2.32)
1.2 (0.047)
71.85 (2.83)
59 (2.32)
1.2 (0.047)
8.5
(0.335)
8.5
(0.335)
42 (1.654)
35.5 (1.398)
No.34
42 (1.654)
35.5 (1.398)
No.34
No.1
No.1
No.35
No.68
No.35
22 (0.866)
No.68
34 (1.339)
22 (0.866) 34 (1.339)
57.51 (2.26)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
61.7 (2.43) –0
61.7 (2.43) –0
50.8 (2) ±0.1 (0.0039)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2–1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
1.27 (0.05) ±0.05 (0.0020)
∗2.
∗2.
34 (1.339)±0.1 (0.0039)
22 (0.866) ±0.1 (0.0039)
57.15 (2.25)±0.1 (0.0039)
34 (1.339)±0.1 (0.0039)
22 (0.866)±0.1 (0.0039)
∗2. Component mounting is prohibited in the
∗2. Component mounting is prohibited in the
Unit: mm (in.)
hatched areas.
hatched areas.
• Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is
used) to mount the connector to the board.
Specifications
subject to change
Dimensions are in millimeters (inches)
12
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.)
RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J38-E4
3 (0.118)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.34)
SMT•FG Clip
4.8 (0.189)
10 (0.394)
78.5 (3.09)
59 (2.32)
8 (0.315)
42 (1.65)
35.5 (1.40)
No.1
No.34
No.35
No.68
2 (0.079)
Unit: mm (in.)
28.45 (1.12)
• Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
No.1
= 41.91 (1.65) ±0.1 (0.0039)
No.34
1.27 (0.05)±0.05 (0.0020)
No.68
No.35
4 (0.157) ±0.1 (0.0039)
34 (1.34)±0.05 (0.002)
67.31 (2.65)~68.0 (2.68)
29.45 ±0.1 (0.0039)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
13
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.)
RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0221-E4
83.38 (3.28)
40 (1.57)
11
(.433)
35.2 (1.39)
11.2 (.441)
1.8
(.071)
R1.4
40 (1.574)
1 (.039)
1 (.039)
11 (.433)
8 (.315)
5 (.197)
10.5 (.413)
0.51(0.020)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
40±0.1 (1.57±.002
)
6-0 (.236-0)
5-0(.197-0)
4.4-0 (.173-0)
9.5-0 (.347-0)
Note 3
PCB Foot Print Viewed
from Connector Side
NOTE 2
NOTE 3
COMPONENT CON NOT BE
MOUNTED IN THIS AREA
COMPONENTS THAT HAVE
5mm HEIGHT CAN BE
MOUNTED IN THIS AREA
1.905±0.05 (.075±0.002
)
3.810±0.05 (.150±0.002
5.715±0.05 (.225±0.002
)
NOTE 4
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
Note 2
)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
14
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.)
RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0231-E4
11 (.433)
8 (.315)
10.5 (.413)
5 (.197)
1 (.039)
40 (1.574)
1 (.039)
11.2 (.441)
35.2 (1.39)
40 (1.57)
1.8
(.071)
83.38 (3.28)
11
(.433)
0.51(0.020)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
40±0.1 (1.57±.002
)
6-0 (.236-0)
5-0(.197-0)
4.4-0 (.173-0)
9.5-0 (.347-0)
Note 3
PCB Foot Print Viewed
from Connector Side
NOTE 2
NOTE 3
COMPONENT CON NOT BE
MOUNTED IN THIS AREA
COMPONENTS THAT HAVE
5mm HEIGHT CAN BE
MOUNTED IN THIS AREA
1.905±0.05 (.075±0.002
)
3.810±0.05 (.150±0.002
5.715±0.05 (.225±0.002
)
NOTE 4
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
Note 2
)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
15
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE)
■ DIMENSIONS
Part Number: FCN-565P136-G/Z-V4
67.31 (2.65)
7
7
59.7 (2.35)
50.8 (2)
(0.276)
(0.276)
34 (1.34)
Connector with the left and right ejector
buttons
Part Number: FCN-565P 136G/005-V4
67.31 (2.65)
7
7
59.7 (2.35)
50.8 (2)
(0.276) (0.276)
34 (1.34)
4.8 (0.189)
4.8 (0.189)
10 (0.394)
78.5 (3.09)
59 (2.32)
42 (1.65)
No.1
No.35
No.34
No.68
35.5 (1.40)
4.8 (0.189)
4.8 (0.189)
10
(0.394)
10
(0.394)
42 (1.654)
42 (1.654)
35.5 (1.398)
No. 1
35.5 (1.398)
No. 34
No. 68
No.35
No.1
No.68
No.34
No. 35
No. 1
No. 68
No. 35
Unit: mm (in.)
Unit: Nom. 34 m (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.1
No.35
No.34
No.68
No.34
No.68
No.1
No.35
±0.1 (0.0039)
4- ø 2.8 (0.110)
34 (1.339)±0.05 (0.0020)
67.31 (2.65)±0.1 (0.0039)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
16
560H Series Connector Conforming to Ver. 4
FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS
■ DIMENSIONS
Button
ESD
Right Button
FCN-560A08
FCN-560A14
11 (.433)
Color
25 (.984)
50.6 (1.99)
7 (.275)
BLACK
7.22 (.284)
BEIGE
8 (.315)
2.1 (.083)
4 (.157)
Unit: mm (in.)
Button
ESD
Left Button
FCN-560A16
FCN-560A22
Color
8 (.315)
4 (.157)
2.1 (.083)
BLACK
BEIGE
7.22 (.284)
25 (.984)
50.6 (1.99)
7 (.275)
11 (.433)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
17
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE
■ DIMENSIONS
Part number: FCN-564P068-G/A-V4
59.74 (2.35)
5.715 (0.225)
1.905 (0.075)
1.27 x (34-1) = 41.9 (1.65)
1.27 (0.05)
No.1
No.17
No.51
No.34
No.68
No.35
7.00 (.276)
44.80 (1.76)
51.80 (2.039)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
1.27 x (68/2-1) = 41.91 (1.65)±0.1 (0.0039)
No.1
±0.05 (0.0020)
1.27 (0.05)
No. 35
No.68
51.8 (2.039)±0.1 (0.0039)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
18
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/0-V4
Polarization Post
74 (2.91)
66.04 (2.6)
5.715 (0.225)
1.905 (0.075)
50.8 (2)
41.91 (1.65)
1.27 (0.05)
59.7 (2.35)
41.91 (1.65)
7 (0.394)
1.27 (0.05)
No.1
No.17
No.34
No.68
No.51
No.35
Unit: mm (in.)
• A model with the feature of preventing mismated board mounting is available. Contact Fujitsu.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
66.04 (2.6)±0.1 (0.0039)
No.1
41.91 (1.65) ±0.1 (0.0039)
±0.05 (0.0020)
No.2
1.27 (0.05)
No.3
No.68
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
19
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/X0-V4
74 (2.91)
67.31 (2.65)
66.04 (2.6)
4 (0.157)
34 (1.34)
5.715 (0.225)
50.8 (2)
41.91 (1.65)
1.905 (0.075)
2 – Ø 2.8 (0.110)
1.27 (0.05)
4.8 (0.177)
10 (0.394)
78.5 (3.09)
42 (1.653)
35.5 (1,40)
No.1
No.17
No.51
No.34
No.68
No.35
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
66.04 (2.6)±0.1 (0.0039)
No.1
41.91 (1.65) ±0.1 (0.0039)
No.2
1.27 (0.05)±0.05 (0.0020)
No.3
No.68
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
20
560H Series Connector Conforming to Ver. 4
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141-0022, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Fujitsu Components
International
Headquarter
Offices
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the prop-
erty of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the
datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its
affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.
Specifications
subject to change
Dimensions are in millimeters (inches)
21
|