Fujitsu 130 User Manual

FMWCC36  
Harsh Environment Case  
User’s Instructions  
Position your PenCentra in the back of the case, as  
shown in Figure 2. Zip up the wraparound zipper.  
Verify that the Record Button extension is positioned  
directly over the Record Button.  
PenCentra 130 and 200  
Record Button Extension  
Record Button  
These instructions provide details on using the  
FMWCC36 harsh environment case (HEC). The  
HEC provides added protection for your  
PenCentra 130 or PenCentra 200 when it is being  
used, transported, or stored. Note the following  
when using the harsh environment case:  
• When charging the pen tablet in the HEC,  
suspend the system to avoid overheating.  
To prevent scratches, a screen protector should  
be installed on the display window of the HEC.  
Two screen protectors are provided with the  
HEC. Additional screen protectors can be  
obtained using order number FMWSP9  
(12-pack).  
• If your PenCentra 130 or PenCentra 200 will be  
used both with and without the HEC, any screen  
protector on the pen tablet can be left in place.  
However, if the pen tablet will be used only in  
the HEC, any screen protector on the pen tablet  
should be removed for better viewing.  
Figure 2. PenCentra in HEC  
Once the system is installed in the HEC, you can either  
store the pen in the system pen holder or it can be  
stored in the pen holder on the left of the HEC, as  
shown in Figure 3.  
• If you use a pen tether, attach it to one of the  
D-rings on the back of the case.  
Installing the Pen Tablet in the Case  
0
Unzip the wraparound zipper, and lay the HEC  
open flat, as shown in Figure 1.  
HEC Screen  
Pen Holder  
Figure 3. Enclosed PenCentra  
Installing a Screen Protector  
0
1. To ensure good adhesion, clean the exterior surface of  
the HEC window with a soft cotton cloth dampened  
with denatured alcohol before installing the screen  
protector.  
Wraparound Zipper  
Note: Using denatured alcohol to clean the window may  
result in streaking when it dries. If streaking occurs,  
gently buff the surface with a clean, soft cloth.  
Figure 1. Empty PenCentra HEC  
PenCentra 130 and PenCentra 200 are trademarks of Fujitsu PC Corporation. © 2000 Fujitsu PC Corporation  
7/00  
58-0671-00C  

ATN 8900 User Manual
Black Decker BL2020R User Manual
Brodit Headrest Monitor User Manual
Clarion VMA 6491 VMA6491 User Manual
Fishman Blender User Manual
Gitzo Explorer Basalt GT2930EX User Manual
Hamilton Beach HBH650 User Manual
Hitachi OPTIGEN AP 720STM User Manual
JBL GT4 0c User Manual
JVC GR SXM747UM User Manual