FujiFilm Digital Camera 16228252 User Manual

Appendix  
For Your Safety  
mally follow the operating instructions. Ad-  
just only those controls that are covered by  
the operating instructions as an improper  
adjustment of other controls may result in  
damage and will often require extensive work  
by a qualified technician to restore the video  
product to its normal operation.  
Antennas  
Use  
Outdoor Antenna Grounding: If an outside Cleaning: Unplug this video product from the  
antenna or cable system is connected to the wall outlet before cleaning. Do not use liq-  
video product, be sure the antenna or cable uid cleaners or aerosol cleaners. Use a damp  
system is grounded so as to provide some cloth for cleaning.  
protection against voltage surges and built-  
up static charges. Section 810 of the National  
Object and Liquid Entry: Never push objects  
of any kind into this video product through  
Electrical Code, ANSI/NFPA No. 70, provides  
openings as they may touch dangerous volt-  
When the video product exhibits a distinct  
information with respect to proper ground-  
age points or short out parts that could result  
change in performance—this indicates  
need for service.  
a
ing of the mast and supporting structure,  
in a fire or electric shock. Never spill liquid of  
grounding of the lead-in wire to an antenna  
any kind on the video product.  
Replacement Parts: When replacement parts  
are required, be sure the service technician  
has used replacement parts specified by the  
manufacturer or have the same characteris-  
tics as the original part. Unauthorized sub-  
stitutions may result in fire, electric shock or  
other hazards.  
discharge unit, size of grounding conductors,  
Lightning: For added protection for this video  
product receiver during a lightning storm, or  
when it is left unattended and unused for  
long periods of time, unplug it from the wall  
outlet and disconnect the antenna or cable  
system. This will prevent damage to the vid-  
eo product due to lightning and power-line  
surges.  
location of antenna discharge unit, connec-  
tion to grounding electrodes, and require-  
ments for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE  
Ground Clamp  
Antenna Lead  
in Wire  
Safety Check: Upon completion of any service  
or repairs to this video product, ask the ser-  
vice technician to perform safety checks to  
determine that the video product is in proper  
operating condition.  
Service  
Antenna  
Electric Service  
Equipment  
Servicing: Do not attempt to service this video  
product yourself as opening or removing cov-  
ers may expose you to dangerous voltage or  
other hazards. Refer all servicing to qualified  
service personnel.  
Discharge Unit  
(NEC SECTION  
810-20)  
Ground Clamps  
Grounding  
Conductors  
(NEC SECTION  
810-21)  
Damage Requiring Service: Unplug this video  
product from the wall outlet and refer servic-  
ing to qualified service personnel under the  
following conditions:  
Power Service Grounding  
Electrode System (NEC ART  
250. PART H)  
Power Lines: An outside antenna system • When the power-supply cord or plug is  
should not be located in the vicinity of over-  
damaged.  
head power lines or other electric light or • If liquid has been spilled, or objects have  
power circuits, or where it can fall into such  
fallen into the video product.  
power lines or circuits. When installing an • If the video product has been exposed to  
outside antenna system, extreme care should  
rain or water.  
be taken to keep from touching such power • If the video product has been dropped or  
lines or circuits as contact with them might  
be fatal.  
the cabinet has been damaged.  
If the video product does not operate nor-  
iii  
For Your Safety  
Be sure to read these notes before use  
WARNING  
Safety Notes  
Do not use the camera in the bathroom or shower. This can cause  
a fire or electric shock.  
• Make sure that you use your camera correctly. Read these safety  
notes and your Owner’s Manual carefully before use.  
Do not use in  
the bathroom or  
shower  
• After reading these safety notes, store them in a safe place.  
Never attempt to change or take apart the camera (never open  
the case). Failure to observe this precaution can cause fire or  
electric shock.  
About the Icons  
The icons shown below are used in this document to indicate the  
severity of the injury or damage that can result if the information  
indicated by the icon is ignored and the product is used incorrectly  
as a result.  
Do not  
disassemble  
Should the case break open as the result of a fall or other accident,  
do not touch the exposed parts. Failure to observe this precau-  
tion could result in electric shock or in injury from touching the  
damaged parts. Remove the battery immediately, taking care  
to avoid injury or electric shock, and take the product to the  
point of purchase for consultation.  
Do not touch  
internal parts  
This icon indicates that death or serious injury can result if the  
information is ignored.  
WARNING  
Do not change, heat or unduly twist or pull the connection cord and  
do not place heavy objects on the connection cord. These actions  
could damage the cord and cause a fire or electric shock. If the  
cord is damaged, contact your FUJIFILM dealer.  
This icon indicates that personal injury or material damage can  
result if the information is ignored.  
CAUTION  
The icons shown below are used to indicate the nature of the instruc-  
tions which are to be observed.  
Do not place the camera on an unstable surface. This can cause the  
camera to fall or tip over and cause injury.  
Triangular icons tell you that this information requires atten-  
tion (“Important”).  
Never attempt to take pictures while in motion. Do not use the  
camera while you are walking or driving a vehicle. This can re-  
sult in you falling down or being involved in a traffic accident.  
Circular icons with a diagonal bar tell you that the action indi-  
cated is prohibited (“Prohibited”).  
Do not touch any metal parts of the camera during a thunderstorm.  
This can cause an electric shock due to induced current from  
the lightning discharge.  
Filled circles with an exclamation mark indicate an action that  
must be performed (“Required”).  
Do not use the battery except as specified. Load the battery as  
shown by the indicator.  
WARNING  
Do not heat, change or take apart the battery. Do not drop or subject  
the battery to impacts. Do not store the battery with metallic prod-  
ucts. Any of these actions can cause the battery to burst or leak  
and cause fire or injury as a result.  
If a problem arises, turn the camera off, remove the battery, and  
disconnect and unplug the AC power adapter. Continued use of  
the camera when it is emitting smoke, is emitting any unusual  
Unplug from  
power socket  
odor, or is in any other abnormal state can cause a fire or elec-  
tric shock. Contact your FUJIFILM dealer.  
Use only the battery or AC power adapters specified for use with this  
camera. Do not use voltages other than the power supply voltage  
shown. The use of other power sources can cause a fire.  
If the battery leaks and fluid gets in contact with your eyes, skin or  
clothing, flush the affected area with clean water and seek medical  
attention or call an emergency number right away.  
Do not allow water or foreign objects to enter the camera. If water  
or foreign objects get inside the camera, turn the camera off,  
remove the battery, and disconnect and unplug the AC power  
adapter. Continued use of the camera can cause a fire or elec-  
tric shock. Contact your FUJIFILM dealer.  
Avoid exposure  
to water  
iv  
For Your Safety  
WARNING  
CAUTION  
Do not use the charger to charge batteries other than those specified  
here. The supplied battery charger is for use only with the type  
of battery supplied with the camera. Using the charger to charge  
conventional batteries or other types of rechargeable batteries  
can cause the battery to leak fluid, overheat or burst.  
Do not cover or wrap the camera or the AC power adapter in a cloth  
or blanket. This can cause heat to build up and distort the cas-  
ing or cause a fire.  
When you are cleaning the camera or you do not plan to use the  
camera for an extended period, remove the battery and disconnect  
and unplug the AC power adapter. Failure to do so can cause a  
fire or electric shock.  
Danger of explosion if battery is incorrectly replaced. Replace only  
with the same or equivalent type.  
When charging ends, unplug the charger from the power socket.  
Leaving the charger plugged into the power socket can cause  
a fire.  
Do not use in the presence of flammable objects, explosive gases,  
or dust.  
Unplug from  
power socket  
When carrying the battery, install it in a digital camera or keep it  
in the hard case. When storing the battery, keep it in the hard case.  
When discarding, cover the battery terminals with insulation tape.  
Contact with other metallic objects or batteries could cause  
the battery to ignite or burst.  
Using a flash too close to a person’s eyes may temporarily affect the  
eyesight. Take particular care when photographing infants and  
young children.  
When a memory card is removed, the card could come out of the slot  
too quickly. Use your finger to hold it and gently release the card.  
Injury could result to those struck by the ejected card.  
Keep memory cards out of the reach of small children. Because  
memory cards are small, they can be swallowed by children.  
Be sure to store memory cards out of the reach of small chil-  
dren. If a child swallows a memory card, seek medical atten-  
tion or call an emergency number.  
Request regular internal testing and cleaning for your camera.  
Build-up of dust in your camera can cause a fire or electric  
shock. Contact your FUJIFILM dealer to request internal clean-  
ing every two years. Please note that this service is not free  
of charge.  
CAUTION  
Remove your fingers from the flash window before the flash fires.  
Failure to observe this precaution could result in burns.  
Do not use this camera in locations affected by oil fumes, steam, hu-  
midity or dust. This can cause a fire or electric shock.  
Keep the flash window clean and do not use the flash if the window  
is obstructed. Failure to observe these precautions could cause  
smoke or discoloration.  
Do not leave this camera in places subject to extremely high temper-  
atures. Do not leave the camera in locations such as a sealed  
vehicle or in direct sunlight. This can cause a fire.  
Keep out of the reach of small children. This product could cause  
injury in the hands of a child.  
Do not place heavy objects on the camera. This can cause the  
heavy object to tip over or fall and cause injury.  
Do not move the camera while the AC power adapter is still connect-  
ed. Do not pull on the connection cord to disconnect the AC power  
adapter. This can damage the power cord or cables and cause  
a fire or electric shock.  
Do not use the AC power adapter when the plug is damaged or the  
plug socket connection is loose. This could cause a fire or electric  
shock.  
v
For Your Safety  
Charging the Battery  
Cautions: Handling the Battery  
The Battery and Power Supply  
Charge the battery in the supplied battery • Do not transport or store with metal objects  
charger. Charging times will increase at am-  
bient temperatures below +10 °C (+50 °F) or • Do not expose to flame or heat.  
above +35 °C (+95 °F). Do not attempt to • Do not disassemble or modify.  
charge the battery at temperatures above • Use with designated chargers only.  
40 °C (+104 °F); at temperatures below 0 °C • Do not drop or subject to strong physical  
Note: Check the type of battery used in  
your camera and read the appropriate  
sections.  
such as necklaces or hairpins.  
The following describes the proper use of  
batteries and how to prolong their life. Incor-  
rect use can shorten battery life or cause leak-  
age, overheating, fire, or explosion.  
(+32 °F), the battery will not charge.  
shocks.  
• Do not expose to water.  
• Keep the terminals clean.  
• The battery and camera body may become  
warm to the touch after extended use. This  
is normal.  
Do not attempt to recharge a fully charged  
battery. The battery does not however need  
to be fully discharged before charging.  
Li-ion Batteries  
Read this section if your camera uses a  
rechargeable Li-ion battery.  
The battery may be warm to the touch imme-  
diately after charging or use. This is normal.  
The battery is not charged at shipment.  
Charge the battery before use. Keep the bat-  
tery in its case when not in use.  
AA Alkalline/Rechargeable Ni-MH Batteries  
Read this section if your camera uses AA  
alkaline or rechargeable AA Ni-MH bat-  
teries. Information on compatible battery  
types may be found elsewhere in the camera  
manual.  
Battery Life  
At normal temperatures, the battery can be  
recharged about 300 times. A noticeable de-  
crease in the length of time the battery will  
hold a charge indicates that it has reached  
the end of its service life and should be re-  
placed.  
Notes on the Battery  
The battery gradually loses its charge when  
not in use. Charge the battery one or two  
days before use.  
Cautions: Handling the Batteries  
• Do not expose to water, flame, or heat, or  
store in warm or humid conditions.  
• Do not transport or store with metal objects  
such as necklaces or hairpins.  
• Do not disassemble or modify the batteries  
or battery casing.  
• Do not subject to strong physical shocks.  
• Do not use batteries that are leaking, de-  
formed, or discolored.  
Battery life can be extended by turning the  
camera off when not in use.  
Storage  
Performance may be impaired if the battery is  
left unused for extended periods when fully  
charged. Run the battery flat before storing it.  
Battery capacity decreases at low tempera-  
tures; a depleted battery may not function at  
when cold. Keep a fully charged spare battery  
in a warm place and exchange as necessary,  
or keep the battery in your pocket or other  
warm place and insert it in the camera only  
when shooting. Do not place the battery in  
direct contact with hand warmers or other  
heating devices.  
If the camera will not be used for an extended  
period, remove the battery and store it in a  
dry place with an ambient temperature of  
from +15 °C to +25 °C (+59 °F to +77 °F). Do  
not store in locations exposed to extremes of  
temperature.  
• Keep out of reach of infants and small chil-  
dren.  
• Insert in the correct orientation.  
vi  
For Your Safety  
• Do not mix old and new batteries, batteries Ni-MH Batteries  
with different charge levels, or batteries of The capacity of Ni-MH batteries may be  
AC Power Addaapptteerrss ((AAvvaaiillaabbllee SSeparately)  
This section applies to all camera models.  
Use only FUJIFILM AC power adapters desig-  
nated for use with this camera. Other adapt-  
ers could damage the camera.  
different types.  
temporarily reduced when new, after long  
• If the camera will not be used for an ex- periods of disuse, or if they are repeatedly  
tended period, remove the batteries. Note recharged before being fully discharged. This  
that the camera clock will be reset.  
is normal and does not indicate a malfunc-  
• The AC power adapter is for indoor use only.  
• Be sure the DC plug is securely connected  
to the camera.  
• Turn the camera off before disconnecting  
the adapter. Disconnect the adapter by the  
plug, not the cable.  
• The batteries may be warm to the touch im- tion. Capacity can be increased by repeatedly  
mediately after use. Turn the camera off and discharging the batteries using the discharge  
allow the batteries to cool before handling. option in the camera setup menu and re-  
• Battery capacity tends to decrease at low charging them using a battery charger.  
temperatures. Keep spare batteries in  
a
Q
CAUTION: Do not use the discharge option  
pocket or other warm place and exchange  
as necessary. Cold batteries may recover  
some of their charge when warmed.  
• Fingerprints and other stains on the battery  
terminals can impair battery performance.  
Thoroughly clean the terminals with  
soft, dry cloth before inserting them in the  
camera.  
• Do not use with other devices.  
• Do not disassemble.  
with alkaline batteries.  
The camera draws a small amount of current  
even when off. Ni-MH batteries that have  
been left in the camera for an extended pe-  
riod may be drawn down to the point that  
they no longer hold a charge. Battery perfor-  
mance may also drop if the batteries are run  
down in a device such as a flashlight. Use the  
discharge option in the camera setup menu  
to discharge Ni-MH batteries. Batteries that  
no longer hold a charge even after repeat-  
edly being discharged and recharged have  
reached the end of their service life and must  
be replaced.  
• Do not expose to high heat and humidity.  
• Do not subject to strong physical shocks.  
• The adapter may hum or become hot to the  
touch during use. This is normal.  
• If the adapter causes radio interference,  
reorient or relocate the receiving antenna.  
a
If the batteries leak, clean the battery  
compartment thoroughly before in-  
serting new batteries.  
If fluid from the battery comes into  
contact with skin or clothing, flush  
the affected area with water. If fluid  
enters your eyes, immediately flush the  
affected area with water and seek  
medical attention. Do not rub your eyes.  
Failure to observe this precaution could  
result in permanent visual impairment.  
Ni-MH batteries can be recharged in a battery  
charger (sold separately). Batteries may be-  
come warm to the touch after charging. Refer  
to the instructions provided with the charger  
for more information. Use the charger with  
compatible batteries only.  
Ni-MH batteries gradually lose their charge  
when not in use.  
Disposal  
Dispose of used batteries in accord with local  
regulations.  
vii  
For Your Safety  
Liquid CCrystal  
Electrical Innterference  
Using the Camera  
In the event that the LCD monitor is damaged, This camera may interfere with hospital or  
care should be taken to avoid contact with liq- aviation equipment. Consult with hospital  
uid crystal. Take the urgent action indicated or airline staff before using the camera in a  
Do not aim the camera at extremely bright  
light sources, such as the sun in a cloudless  
sky. Failure to observe this precaution could  
damage the camera image sensor.  
should any of the following situations arise:  
hospital or on an aircraft.  
If liquid crystal comes in contact with your  
skin, clean the area with a cloth and then  
wash thoroughly with soap and running  
water.  
If liquid crystal enters your eyes, flush the af-  
fected eye with clean water for at least 15  
minutes and then seek medical assistance.  
If liquid crystal is swallowed, rinse your  
mouth thoroughly with water. Drink large  
quantities of water and induce vomiting,  
then seek medical assistance.  
Color Television Systems  
Take Test Shots  
NTSC (National Television System Committee)  
is a color television telecasting specification  
adopted mainly in the U.S.A., Canada, and  
Japan. PAL (Phases Alternation by Line) is  
a color television system adopted mainly in  
European countries and China.  
Before taking photographs on important  
occasions (such as at weddings or before  
taking the camera on a trip), take a test shot  
and view the result in the LCD monitor to en-  
sure that the camera is functioning normally.  
FUJIFILM Corporation can not accept liability  
for damages or lost profits incurred as a result  
of product malfunction.  
Exif Print (Exif Version 2.3)  
Exif Print is a newly revised digital camera file  
format in which information stored with pho-  
tographs is used for optimal color reproduc-  
tion during printing.  
Notes on Copyright  
Unless intended solely for personal use, imag-  
es recorded using your digital camera system  
cannot be used in ways that infringe copy-  
right laws without the consent of the owner.  
Note that some restrictions apply to the  
photographing of stage performances, enter-  
tainments, and exhibits, even when intended  
purely for personal use. Users are also asked  
to note that the transfer of memory cards  
containing images or data protected under  
copyright laws is only permissible within the  
restrictions imposed by those copyright laws.  
Although the display is manufactured using  
extremely high-precision technology, it may  
contain pixels that are always lit or that do not  
light. This is not a malfunction, and images re-  
corded with the product are unaffected.  
IMPORTANT NOTICE:  
Read Before Using the Software  
Direct or indirect export, in whole or in part,  
of licensed software without the permission  
of the applicable governing bodies is pro-  
hibited.  
Trademarkk Information  
xD-Picture Card and E are trademarks  
of FUJIFILM Corporation. The typefaces in-  
cluded herein are solely developed by Dyna-  
Comware Taiwan Inc. Macintosh, QuickTime,  
and Mac OS are trademarks of Apple Inc. in  
the U.S.A. and other countries. Windows 7,  
Windows Vista, and the Windows logo are  
trademarks of the Microsoft group of com-  
panies. Adobe and Adobe Reader are either  
trademarks or registered trademarks of Ado-  
be Systems Incorporated in the U.S.A. and/or  
other countries. The SDHC and SDXC logos  
are trademarks of SD-3C, LLC. The HDMI logo  
is a trademark. YouTube is a trademark of  
Google Inc. All other trade names mentioned  
in this manual are the trademarks or regis-  
tered trademarks of their respective owners.  
Haandling  
To ensure that images are recorded correctly,  
do not subject the camera to impact or physi-  
cal shocks while images are being recorded.  
viii  
For Your Safety  
IMPORTANT: Read this section before using the toponyms includ- Disclaimer of Warranty: FUJIFILM Corporation AND ITS LICENSORS  
ed in this product.  
(INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY  
WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,  
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-  
INFRINGEMENT. Some States, Territories and Countries do not allow  
certain warranty exclusions, so to that extent the above exclusion may  
not apply to you.  
Toponym Data License Agreement  
Personal Use Only. You agree to use this Data together with this digital  
camera for the solely personal, non-commercial purposes for which  
you were licensed, and not for service bureau, time-sharing or other  
similar purposes. Accordingly, but subject to the restrictions set forth  
in the following paragraphs, you may copy this Data only as necessary  
for your personal use to (i) view it, and (ii) save it, provided that you do  
not remove any copyright notices that appear and do not modify the  
Data in any way. You agree not to otherwise reproduce, copy, modify,  
decompile, disassemble or reverse engineer any portion of this Data,  
and may not transfer or distribute it in any form, for any purpose, ex-  
cept to the extent permitted by mandatory laws. Multi-disc sets may  
only be transferred or sold as a complete set as provided by FUJIFILM  
Corporation and not as a subset thereof.  
Disclaimer of Liability: FUJIFILM Corporation AND ITS LICENSORS (IN-  
CLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO  
YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE  
OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION  
ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT,  
WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFOR-  
MATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR  
SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL  
OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR  
INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMA-  
TION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER  
IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY,  
EVEN IF FUJIFILM Corporation OR ITS LICENSORS HAVE BEEN ADVISED  
OF THE POSSIBILITY OF SUCH DAMAGES. Some States, Territories and  
Countries do not allow certain liability exclusions or damages limita-  
tions, so to that extent the above may not apply to you.  
Restrictions. Except where you have been specifically licensed to do  
so by FUJIFILM Corporation, and without limiting the preceding para-  
graph, you may not (a) use this Data with any products, systems, or  
applications installed or otherwise connected to or in communication  
with vehicles, capable of vehicle navigation, positioning, dispatch, real  
time route guidance, fleet management or similar applications; or (b)  
with or in communication with any positioning devices or any mo-  
bile or wireless-connected electronic or computer devices, including  
without limitation cellular phones, palmtop and handheld computers,  
pagers, and personal digital assistants or PDAs.  
Export Control. You agree not to export from anywhere any part of the  
Data provided to you or any direct product thereof except in compli-  
ance with, and with all licenses and approvals required under, appli-  
cable export laws, rules and regulations.  
Warning. The Data may contain inaccurate or incomplete information  
due to the passage of time, changing circumstances, sources used  
and the nature of collecting comprehensive geographic data, any of  
which may lead to incorrect results.  
Entire Agreement. These terms and conditions constitute the entire  
agreement between FUJIFILM Corporation (and its licensors, includ-  
ing their licensors and suppliers) and you pertaining to the subject  
matter hereof, and supersedes in their entirety any and all written or  
oral agreements previously existing between us with respect to such  
subject matter.  
No Warranty. This Data is provided to you “as is,” and you agree to use  
it at your own risk. FUJIFILM Corporation and its licensors (and their  
licensors and suppliers) make no guarantees, representations or war-  
ranties of any kind, express or implied, arising by law or otherwise,  
including but not limited to, content, quality, accuracy, completeness,  
effectiveness, reliability, fitness for a particular purpose, usefulness,  
use or results to be obtained from this Data, or that the Data or server  
will be uninterrupted or error-free.  
ix  
For Your Safety  
Governing Law. The above terms and conditions shall be governed by  
the laws of the State of Illinois, Netherlands, without giving effect to  
(i) its conflict of laws provisions, or (ii) the United Nations Convention  
for Contracts for the International Sale of Goods, which is explicitly ex-  
cluded. You agree to submit to the jurisdiction of the State of Illinois,  
The Netherlands for any and all disputes, claims and actions arising  
from or in connection with the Data provided to you hereunder.  
Australia  
Austria  
Copyright. Based on data provided under  
license from PSMA Australia Limited  
(www.psma.com.au).  
“© Bundesamt für Eich- und Vermes-  
sungswesen”  
Croatia, Cyprus,  
Estonia, Latvia,  
“© EuroGeographics”  
Geodetics. The geodetic system used by this device to record latitude Lithuania, Moldova,  
and longitude is WGS 84.  
Poland, Slovenia and/  
or Ukraine  
Copyright. The map data included in this device are protected under  
copyright law and except for personal use may not be employed  
without the permission of the copyright holder.  
France  
The following notice must appear on all  
copies of the Data, and may also appear  
on packaging: “source: © IGN France – BD  
TOPO®”  
Navigation. This device can not be used for purposes of navigation.  
Licensed Software Copyright Holders  
Germany  
“Die Grundlagendaten wurden mit  
Genehmigung der zuständigen Behörden  
entnommenorDie Grundlagendaten  
wurden mit Genehmigung der zustaendi-  
gen Behoerden entnommen.”  
© 2010 NAVTEQ All rights reserved.  
Great Britain  
“Based upon Crown Copyright material.”  
“Copyright Geomatics Ltd.”  
This service uses POI (Points Of Inter-  
est) of ZENRIN CO., LTD. “POWERED BY Greece  
ZENRIN” is a trademark of ZENRIN CO.,  
LTD. © 2010 ZENRIN CO., LTD. All rights  
reserved.  
Hungary  
Italy  
“Copyright © 2003; Top-Map Ltd.”  
“La Banca Dati Italiana è stata prodotta  
usando quale riferimento anche cartografia  
numerica ed al tratto prodotta e fornita  
dalla Regione Toscana.”  
© Her Majesty the Queen in Right of Canada, © Queen’s Printer for  
Ontario, © Canada Post Corporation, GeoBase®, © Department of  
Natural Resources Canada, ZIP+4®, © United States Postal Service®  
2010. the USPS®.  
Norway  
“Copyright © 2000; Norwegian Mapping  
Authority”  
Portugal  
Spain  
“Source: IgeoE – Portugal”  
“Información geográfica propiedad del  
CNIG”  
Sweden  
“Based upon electronic data Ó National  
Land Survey Sweden.”  
Switzerland  
Topografische Grundlage: Ó Bundesamt für  
Landestopographie.”  
x
For Your Safety  
Governing Law  
Government End Users: If the Data is being acquired by or on behalf of  
POI information in Japan: The above terms and conditions shall be the United States government or any other entity seeking or apply-  
governed by the laws of Japan, without giving effect to (i) its conflict ing rights similar to those customarily claimed by the United States  
of laws provisions, or (ii) the United Nations Convention for Contracts government, this Data is acommercial itemas that term is defined at  
for the International Sale of Goods, which is explicitly excluded. You 48 C.F.R. (“FAR”) 2.101, is licensed in accordance with these End-User  
agree to submit to the exclusive jurisdiction of the Tokyo District Court Terms, and each copy of Data delivered or otherwise furnished shall  
in the first instance for any and all disputes, claims and actions arising be marked and embedded as appropriate with the following “Notice  
from or in connection with the Data provided to you hereunder.  
of Use,and shall be treated in accordance with such Notice:  
POI information outside Japan: The above terms and conditions shall be  
governed by the laws of the State of Illinois, without giving effect to  
(i) its conflict of laws provisions, or (ii) the United Nations Convention  
for Contracts for the International Sale of Goods, which is explicitly  
excluded. You agree to submit to the jurisdiction of the State of Illinois  
for any and all disputes, claims and actions arising from or in connec-  
tion with the Data provided to you hereunder.  
NOTICE OF USE  
CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ  
CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph  
Street, Chicago, Illinois 60606  
This Data is a commercial item as defined in FAR 2.101 and is subject  
to these End-User Terms under which this Data was provided.  
© 2010 NAVTEQ – All rights reserved.  
If the Contracting Officer, federal government agency, or any federal  
official refuses to use the legend provided herein, the Contracting  
Officer, federal government agency, or any federal official must notify  
NAVTEQ prior to seeking additional or alternative rights in the Data.  
xi  
About This Manual  
This manual is for use with FinePix F770EXR and F750EXR cameras. With the  
exceptions of the features listed below, operations for the two models are  
identical.  
Model  
FinePix F770EXR  
FinePix F750EXR  
Featurre  
RGPS  
jRAW  
P 65  
P 117  
Not available  
PBEST FRAME CAPTURE  
P 48  
LFINAL n  
Not available  
P 48  
Memoryy Caarrds  
Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and  
SDXC memory cards (P12), referred to in this manual asmemory cards.”  
xii  
About This Manual  
Before using the camera, read this manual and the warnings inFor Your Safe-  
ty(P ii). For information on specific topics, consult the sources below.  
Table of Contents ............................Pxv Troubleshooting .......................... P124  
TheTable of Contentsgives an over- Having a specific problem with the  
view of the entire manual. The princi- camera? Find the answer here.  
pal camera operations are listed here.  
Warningg Messaggeess aanndd Displays ... P131  
Find out what’s behind that flashing  
icon or error message in the display.  
Temperatture Warning  
The camera will turn off automatically before its temperature or the temperature  
of the battery rise above safe limits. Pictures taken when a temperature warning is  
displayed may exhibit higher levels ofnoise”(mottling). Turn the camera off and wait  
for it to cool before turning it on again.  
xiii  
Frequeently--Usseedd BBuuttttons  
Turning the Caamera onn iin Playbaack Mode  
y When the camera is  
off, playback can be  
Takiinngg PPictureess DDuurriinngg Playback  
y To return instantly to shooting mode,  
press the shutter button halfway.  
started by pressing the  
abutton for about a  
second.  
Shoot  
View  
ꢀꢀ  
Deletingg Pictures  
Silent Mode  
y To delete a picture,  
display it full frame and  
press the selector up (b).  
y Press and hold the DISP/  
BACK button to disable  
camera lights and  
sounds.  
xiv  
Table of Contents  
For Your Safety ..................................................................ii  
IMPORTANT SAFETY INSTRUCTIONS..................................ii  
Safety Notes....................................................................iv  
About This Manual ..........................................................xii  
Frequently-Used Buttons .............................................. xiv  
Moree oonn PPhotography  
Shooting Mode................................................................22  
E(EAUTO/EPriority).................23  
R(EAUTO).................................................23  
EPriority..........................................................24  
Adv. ADVANCED ..........................................................25  
r MOTION PANORAMA 360.......................................25  
iPRO FOCUS...........................................................28  
jPRO LOW-LIGHT....................................................29  
n MULTIPLE EXPOSURE..............................................30  
i INDIVID. SHUTTER 3D ..............................................31  
SP SCENE POSITION.......................................................33  
M MANUAL ...................................................................35  
A APERTURE PRIORITY AE..............................................35  
S SHUTTER PRIORITY AE ................................................36  
P PROGRAM AE..............................................................36  
Focus Lock........................................................................37  
dExposure Compensation..........................................39  
FMacro Mode (Close-ups) ...........................................40  
NUsing the Flash (Super-Intelligent Flash) .................41  
hUsing the Self-Timer .................................................43  
The Fn Button..................................................................44  
bIntelligent Face Detection.......................................45  
RContinuous Shooting ...............................................46  
ITOP n (F770EXR).....................................................47  
ITOP n (F750EXR).....................................................47  
LFINAL n (F750EXR Only)..........................................48  
PBEST FRAME CAPTURE (F770EXR Only) ...................48  
OAE BKT ..................................................................50  
XFILM SIMULATION BKT............................................50  
YDYNAMIC RANGE BKT.............................................50  
Beforre You Begin  
Symbols and Conventions.................................................1  
Supplied Accessories.........................................................1  
Parts of the Camera ..........................................................2  
Camera Displays...............................................................4  
Shooting ........................................................................4  
Playback.........................................................................5  
First Steps  
Charging the Battery ........................................................7  
Inserting the Battery and a Memory Card.......................9  
Compatible Memory Cards .............................................12  
Turning the Camera on and Off ......................................14  
Shooting Mode ..............................................................14  
Playback Mode...............................................................14  
Basic Setup ......................................................................16  
Basic Photography and Playback  
Taking Pictures in R(EAUTO) Mode.............17  
Viewing Pictures .............................................................21  
xv  
Table of Contents  
nFace Recognition......................................................51  
Adding New Faces..........................................................51  
Viewing, Editing, and Deleting Existing Data .................53  
Adding Faces Automatically ...........................................53  
Movies  
Recording Movies............................................................73  
Movie Frame Size ...........................................................74  
Viewing Movies ...............................................................75  
Moree oon Playback  
Coonnnneections  
Playback Options.............................................................55  
Continuous Shooting......................................................55  
IFavorites: Rating Pictures .........................................55  
Playback Zoom...............................................................56  
Multi-Frame Playback....................................................57  
ADeleting Pictures......................................................58  
bImage Search............................................................59  
mPhotoBook Assist .....................................................60  
Creating a PhotoBook.....................................................60  
Viewing Photobooks ......................................................61  
Editing and Deleting Photobooks...................................61  
Viewing Panoramas ........................................................62  
Viewing Photo Information............................................63  
Viewing Pictures on TV ...................................................76  
Printing Pictures via USB................................................78  
Printing the DPOF Print Order.........................................80  
Viewing Pictures on a Computer....................................82  
Windows: Installing MyFinePix Studio ...........................82  
Macintosh: Installing FinePixViewer...............................85  
Connecting the Camera..................................................87  
Menus  
Using the Menus: Shooting Mode..................................90  
Using the F-Mode Menu .............................................90  
F-Mode Menu Options ................................................90  
NISO........................................................................90  
OIMAGE SIZE............................................................91  
RCONTINUOUS.........................................................92  
RLANDMARK NAVIGATOR (F770EXR Only) ..................92  
RSET-UP (F770EXR Only) ..........................................92  
ZADVANCED ANTI BLUR ............................................93  
PFILM SIMULATION ..................................................93  
GPS (F770EXR Only)  
Recording GPS Data with Pictures .................................65  
GPS Tracking ....................................................................67  
Viewing GPS Data............................................................69  
Photo Navigation ...........................................................69  
Copying GPS Data to Other Images.................................70  
RLandmark Navigator................................................71  
xvi  
Table of Contents  
Using the Shooting Menu...............................................94  
Shooting Menu Options .................................................94  
AEMODE ....................................................94  
AAdv. MODE ............................................................94  
ASCENE POSITION.....................................................94  
NISO........................................................................94  
OIMAGE SIZE............................................................94  
TIMAGE QUALITY .....................................................94  
UDYNAMIC RANGE ...................................................95  
PFILM SIMULATION ..................................................95  
DWHITE BALANCE ....................................................96  
yINTELLIGENT SHARPNESS........................................97  
RCONTINUOUS.........................................................97  
RMY LANDMARK REGISTER (F770EXR Only) ...............97  
ZADVANCED ANTI BLUR ............................................97  
bFACE DETECTION ....................................................97  
CPHOTOMETRY ........................................................98  
FAF MODE...............................................................99  
nFACE RECOGNITION.................................................99  
FMOVIE AF MODE ..................................................100  
WMOVIE MODE.......................................................100  
a STILL SHOOTING IN MOVIE ....................................100  
JAE BKT EV STEPS..................................................100  
Using the Menus: Playback Mode ................................101  
Using the F-Mode Menu ...........................................101  
F-Mode Menu Options ..............................................101  
mPHOTOBOOK ASSIST..............................................101  
RLANDMARK NAVIGATOR (F770EXR Only) ................101  
RPHOTO NAVIGATION (F770EXR Only) ......................101  
RSET-UP (F770EXR Only) ........................................102  
ISLIDE SHOW ........................................................102  
Using the Playback Menu.............................................103  
Playback Menu Options................................................103  
mPHOTOBOOK ASSIST..............................................103  
RLANDMARK NAVIGATOR (F770EXR Only) ................103  
RLOCATION INFO COPY (F770EXR Only) ....................103  
RPHOTO NAVIGATION (F770EXR Only) ......................103  
bIMAGE SEARCH ....................................................103  
AERASE .................................................................103  
jMARK FOR UPLOAD TO..........................................104  
ISLIDE SHOW ........................................................105  
BRED EYE REMOVAL ...............................................105  
DPROTECT..............................................................105  
GCROP...................................................................106  
ORESIZE.................................................................106  
CIMAGE ROTATE .....................................................107  
ECOPY...................................................................107  
FVOICE MEMO .......................................................108  
iERASE FACE RECOG...............................................108  
KPRINT ORDER (DPOF)............................................108  
JDISP ASPECT........................................................109  
xvii  
Table of Contents  
The Setup Menu ............................................................110  
Using the Setup Menu..................................................110  
Setup Menu Options ....................................................111  
FDATE/TIME ..........................................................111  
NTIME DIFFERENCE .................................................111  
Q a....................................................111  
oSILENT MODE.......................................................111  
RRESET..................................................................112  
KFORMAT ..............................................................112  
RSET-UP (F770EXR Only) ........................................112  
AIMAGE DISP. .........................................................113  
BFRAME NO. ..........................................................113  
GOPERATION VOL....................................................114  
HSHUTTER VOLUME ................................................114  
eSHUTTER SOUND..................................................114  
IPLAYBACK VOLUME ..............................................114  
JLCD BRIGHTNESS..................................................114  
T MONITOR SUNLIGHT MODE ...................................114  
N AUTO POWER OFF ................................................114  
F Fn BUTTON ..........................................................114  
LDUAL IS MODE.....................................................115  
BRED EYE REMOVAL ...............................................115  
R INTELLIGENT DIGITAL ZOOM..................................116  
CAF ILLUMINATOR ..................................................117  
jRAW (F770EXR Only)............................................117  
tSAVE ORG IMAGE .................................................117  
mAUTOROTATE PB ...................................................117  
O BACKGROUND COLOR............................................117  
cGUIDANCE DISPLAY ..............................................117  
QVIDEO SYSTEM.....................................................118  
xPOWER MANAGEMENT.........................................118  
UDATE STAMP ........................................................119  
W START-UP SCREEN ................................................119  
RDEMONSTRATION (F770EXR Only) .........................119  
Techniccaall NNotes  
Optional Accessories .....................................................120  
Accessories from FUJIFILM............................................121  
Caring for the Camera...................................................122  
Storage and Use ...........................................................122  
Cleaning.......................................................................123  
Traveling ......................................................................123  
Troubleshooting  
Problems and Solutions................................................124  
Warning Messages and Displays ..................................131  
Appendix  
Internal Memory/Memory Card Capacity....................135  
FinePix F770EXR..........................................................135  
FinePix F750EXR..........................................................136  
Specifications ................................................................137  
xviii  
Before You Begin  
Symbols andd Convventions  
The following symbols are used in this manual:  
Q : This information should be read before use to ensure correct operation.  
R : Additional information that may be helpful when using the camera.  
P: Other pages in this manual on which related information may be found.  
Menus and other text in the displays are shown in bold. In the illustrations in  
this manual, displays may be simplified for explanatory purposes.  
Supplied Accessories  
The following items are included with the camera:  
Rechargeable  
battery  
F770EXR: NP-50A  
F750EXR: NP-50  
BC-45W battery  
charger  
USB cable  
A/V cable  
CD-ROM  
(contains this  
manual)  
Attttaacchhiing the Strap  
Attach the strap  
as shown.  
• Strap  
Basic Manual  
1
Parts of the Camera  
For more information, refer to the page listed to the right of each item.  
Selector button  
Move cursor up  
d(exposure compensation) button (P39)  
b(delete) button (Pxiv)  
MENU/OK button  
Move cursor left  
F(macro) button (P40)  
Move cursor right  
N(flash) button (P41)  
Command dial  
Move cursor down  
h(self-timer) button (P43)  
* The illustrations in this manual have been simplified for explanatory purposes.  
Before You Begin  
2
Parts of the Camera  
1 Fn (function) button..................................................... 44 16 F(movie recording) button....................................... 73  
2 Shutter button.............................................................. 19 17 Terminal cover ...................................................76, 78, 87  
3 ON/OFF button ............................................................. 14 18 DC coupler cable cover ................................................ 121  
4 Flash............................................................................. 41 19 F(photo mode) button .......................................90, 101  
5 Flash pop-up button..................................................... 41  
6 Microphone ...........................................................73, 108 20 DISP (display)/BACK button .....................................6, 16  
7 Lens and lens cover  
o(silent mode) button2 .............................................xiv  
Monitor sunlight mode1.................................................. 6  
8 AF-assist illuminator................................................... 117 21 Battery-chamber cover................................................... 9  
Self-timer lamp ............................................................ 43 22 Tripod mount  
9 Zoom control ...........................................................18, 56 23 Speaker..................................................................75, 108  
10 Built-in GPS antenna (F770EXR only) ............................. 65 24 USB multi-connector .........................................76, 78, 87  
11 LCD monitor.................................................................... 4 25 Connector for HDMI cable ............................................. 77  
12 a(playback) button .................................................. 21 26 Battery latch..............................................................9, 11  
13 Indicator lamp (see below)  
27 Battery chamber............................................................. 9  
14 Mode dial...................................................................... 22 28 Memory card slot.......................................................... 10  
15 Strap eyelet .................................................................... 1  
1 Press and hold the Fbutton for monitor sunlight mode.  
2 Press and hold the DISP/BACK button until ois displayed.  
Thhee IInndicator Lamp  
The indicator lamp shows camera status as follows:  
Indicator lamp  
Glowwss ggrreen  
Blinks green  
Caammera sstatus  
Focus locked.  
Blur, focus, or exposure warning. Picture can be taken.  
Blinks green and orange Recording pictures. Additional pictures can be taken.  
Glowwss oorraannggee  
Blinks orange  
Blinks red  
Recording pictures. No additional pictures can be taken at this time.  
Flash charging; flash will not fire when picture is taken.  
Lens or memory error.  
Before You Begin  
3
Parts of the Camera  
Camera Displays  
The following types of indicator may be displayed during shooting and play-  
back. Indicators vary with camera settings.  
Shooting  
11 Number of available frames........................................ 135  
12 Sensitivity..................................................................... 90  
13 Image size/quality...................................................91, 94  
14 Dynamic range ............................................................. 95  
15 Film simulation............................................................. 93  
16 White balance............................................................... 96  
17 Battery level ................................................................... 6  
18 Dual IS mode .............................................................. 115  
19 GPS signal strength (F770EXR only) ............................... 65  
20 Blur warning..........................................................42, 131  
21 Focus warning .......................................................19, 131  
22 Exposure compensation................................................ 39  
23 Aperture  
1 Shooting mode............................................................. 22  
2 Intelligent Face Detection indicator .............................. 45  
3 Metering....................................................................... 98  
4 Continuous shooting mode........................................... 46  
5 Silent mode indicator ..............................................3, 111  
6 Place name stamp (F770EXR only) ................................. 92  
7 Temperature warning ................................................. 131  
8 Internal memory indicator*  
24 Shutter speed  
25 Date and time............................................................... 16  
26 Focus frame .................................................................. 37  
27 Date stamp ................................................................. 119  
28 Intelligent sharpness .................................................... 97  
29 Self-timer indicator ...................................................... 43  
30 Macro (close-up) mode................................................. 40  
31 Flash mode ................................................................... 41  
9 Monitor sunlight mode................................................... 6  
10 Movie mode.................................................................. 74  
*a: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory (P10).  
4
Before You Begin  
Parts of the Camera  
Playback  
1 Playback mode indicator..........................................21, 55  
2 Intelligent Face Detection indicator .......................45, 105  
3 Red-eye removal indicator.......................................... 105  
4 Pro focus mode, pro low-light mode........................28, 29  
5 Motion panorama z................................................. 62  
6 3D image ...................................................................... 31  
7 Gift image..................................................................... 55  
8 Frame number............................................................ 113  
9 Dynamic range ............................................................. 95  
10 Emode.............................................................. 23  
11 GPS data (F770EXR only)................................................ 69  
12 Portrait enhancer.......................................................... 33  
13 Mark for upload to...................................................... 104  
14 Photobook assist........................................................... 60  
15 Voice memo indicator................................................. 108  
16 DPOF print indicator ..................................................... 80  
17 Protected image ......................................................... 105  
18 Favorites ....................................................................... 55  
Before You Begin  
5
Parts of the Camera  
Batterryy LLevel  
Battery level is shown as follows:  
Indicator  
Description  
D(white)  
C(white)  
B(red)  
Battery partially discharged.  
Battery more than half discharged.  
Low battery. Charge as soon as possible.  
A(blinks red) Battery exhausted. Turn camera off and charge battery.  
Hiding and Viewing Indicators  
Press DISP/BACK to cycle through shooting and playback indicators as follows:  
Shooting: Indicators displayed/indicators hidden/best framing/HD framing/histogram  
Playback:Indicatorsdisplayed/indicatorshidden/Ifavorites(P55)/photoinfo(P63)  
Bright Ambient Lighting  
Reflections and glare caused by bright ambient lighting may make it hard to see the  
display in the monitor, particularly when the camera is used outdoors. This can be ad-  
dressed by holding the Fbutton to trigger outdoor mode. Outdoor mode can also be  
enabled using the T MONITOR SUNLIGHT MODE option in the setup menu (P114).  
6
Before You Begin  
First Steps  
Chhaarrggiinngg the Batteerryy  
The battery is not charged at shipment. Charge the battery before use.  
Place the battery in the supplied battery charger.  
Insert the battery in the orientation  
1
Charge lamp  
indicated by the DFC labels.  
Battery  
Arrow  
The F770EXR uses an NP-50A recharge-  
able battery, the F750EXR an NP-50 re-  
chargeable battery.  
DFC  
label  
DFC label  
Battery charger  
Plug the charger in.  
Plug the charger into an indoor power outlet. The charging indicator will  
2
light.  
Thhee CCharggiinngg IInnddicator  
The charging indicator shows battery charge status as follows:  
Charging indicator  
Battery status  
Battery not inserted.  
Battery fully charged.  
Battery charging.  
Battery fault.  
Action  
Insert the battery.  
Reemmoove the battery.  
Unplug thhe chargeer and remmove the battery.  
Off  
On  
Blinks  
7
Charging the Battery  
Charge the battery.  
3
Remove the battery when charging is complete. See the specifications  
(P141) for charging times (note that charging times increase at low tem-  
peratures).  
Q Unplug the charger when it is not in use.  
8
First Steps  
Innsseertinng the Baatttterryy aanndd aa MMemory Cardd  
Although the camera can store pictures in internal memory, optional SD,  
SDHC, and SDXC memory cards (sold separately) can be used to store addi-  
tional pictures. After charging the battery, insert the battery and memory card  
as described below.  
Open the battery-chamber cover.  
1
R Be sure the camera is off before opening  
the battery-chamber cover.  
Q Do not open the battery-chamber cover  
when the camera is on. Failure to ob-  
serve this precaution could result in dam-  
age to image files or memory cards.  
Q Do not use excessive force when handling the battery-chamber cover.  
Insert the battery.  
2
Orange stripe  
Align the orange stripe on the battery with the orange  
battery latch and slide the battery into the camera,  
keeping the battery latch pressed to one side. Confirm  
that the battery is securely latched.  
Q Insert the battery in the correct orientation. Do NOT use  
force or attempt to insert the battery upside down or back-  
wards. The battery will slide in easily in the correct orien-  
tation.  
Battery latch  
First Steps  
9
Inserting the Battery and a Memory Card  
Insert the memory card.  
3
Holding the memory card in the orientation shown at  
right, slide it in until it clicks into place at the back of  
the slot.  
Click  
Q Be sure card is in the correct orientation; do not insert at  
an angle or use force. If the memory card is not correctly  
inserted or no memory card is inserted, awill appear in  
the LCD monitor and internal memory will be used for re-  
cording and playback.  
Q SD/SDHC/SDXC memory cards can be locked, making  
it impossible to format the card or to record or delete  
images. Before inserting an SD/SDHC/SDXC memory  
card, slide the write-protect switch to the unlocked  
position.  
Write-protect switch  
Close the battery-chamber cover.  
4
10  
First Steps  
Inserting the Battery and a Memory Card  
R Using an AC Power Adapter  
• The camera can be powered by an optional AC power adapter and DC coupler (sold  
separately). See the manuals provided with the AC power adapter and DC coupler  
for details.  
• Depending on the country or region of sale, a demo mode slide show may start if  
the camera is turned on while powered by an AC power adapter. Press the shutter  
button to end the show.  
Reemoving the Battery annd Memorry Caarrdd  
Before removing the battery or memory card, turn the camera off and open the  
battery-chamber cover.  
To remove the battery, press the battery latch to the side, and  
slide the battery out of the camera as shown.  
Battery latch  
To remove the memory card, press it in and release it slowly.  
The card can then be removed by hand. When a memory card  
is removed, the card could come out of the slot too quickly. Use  
your finger to hold it and gently release the card.  
First Steps  
11  
Inserting the Battery and a Memory Card  
Compatible Memory Cards  
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been ap-  
proved for use in the camera. A complete list of approved memory cards is  
available at http://www.fujifilm.com/support/digital_cameras/compatibility/.  
Operation is not guaranteed with other cards. The camera can not be used  
with xD-Picture Cards or MultiMediaCard (MMC) devices.  
Q Memory Caarrds  
Do not turn the camera off or remove the memory card while the memory card is  
being formatted or data are being recorded to or deleted from the card. Failure to  
observe this precaution could damage the card.  
• Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all  
memory cards after using them in a computer or other device. For more information  
on formatting memory cards, seeKFORMAT” (P112).  
• Memory cards are small and can be swallowed; keep out of reach of children. If a  
child swallows a memory card, seek medical assistance immediately.  
• miniSD or microSD adapters that are larger or smaller than the standard dimensions  
of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take  
the camera to an authorized service representative. Do not forcibly remove the card.  
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.  
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory  
card. Use a G card or better when shooting HD or high-speed movies.  
12  
First Steps  
Inserting the Battery and a Memory Card  
• The data in internal memory may be erased or corrupted when the camera is re-  
paired. Please note that the repairer will be able to view pictures in internal memory.  
• Formatting a memory card or internal memory in the camera creates a folder in  
which pictures are stored. Do not rename or delete this folder or use a computer or  
other device to edit, delete, or rename image files. Always use the camera to delete  
pictures from memory cards and internal memory; before editing or renaming files,  
copy them to a computer and edit or rename the copies, not the originals.  
Q Batteries  
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this  
precaution could prevent the battery from charging.  
• Do not affix stickers or other objects to the battery. Failure to observe this precaution  
could make it impossible to remove the battery from the camera.  
• Do not short the battery terminals. The battery could overheat.  
• Read the cautions inThe Battery and Power Supply(Pvi).  
• Use only battery chargers designated for use with the battery. Failure to observe this  
precaution could result in product malfunction.  
• Do not remove the labels from the battery or attempt to split or peel the outer casing.  
• The battery gradually loses its charge when not in use. Charge the battery one or  
two days before use.  
First Steps  
13  
Turning the Camera on and Off  
Shooting Mode  
Playback Mode  
Press the ON/OFF button to turn the To turn the camera on and begin  
camera on. The lens will extend au- playback, press the a button for  
tomatically.  
about a second.  
Press the a button again or press  
the ON/OFF button to turn the camera  
off.  
Press ON/OFF again to turn the camera  
off.  
R Switching to Playback Mode  
R Switching to Shooting Mode  
Press the a button to start playback.  
Press the shutter button halfway to return  
to shooting mode.  
To exit to shooting mode, press the shut-  
ter button halfway. Press the a button  
to return to playback.  
14  
First Steps  
Turning the Camera on and Off  
Q Forcibly obstructing the lens could cause damage or product malfunction.  
Q Fingerprints and other marks on the lens can affect pictures. Keep the lens clean.  
Q The ON/OFF button does not completely end the supply of power to the camera.  
R Auto Power Off  
The camera will turn off automatically if no operations are performed for the length of  
time selected for NAUTO POWER OFF (P114).  
First Steps  
15  
Baassic SSetup  
A language-selection dialog is displayed the first time the camera is turned  
on. Set up the camera as described below (you can reset the clock or change  
languages at any time using the FDATE/TIME or Qa options in  
the setup menu; for information on displaying the setup menu, see page 111).  
Highlight a language and press MENU/OK.  
1
ENGLISH  
FRANCAIS  
DEUTSCH  
R Press DISP/BACK to skip the current step. Any steps you skip  
ESPAÑOL  
will be displayed the next time the camera is turned on.  
PORTUGUÊS  
The date and time will be displayed. Press the selector  
left or right to highlight the year, month, day, hour, or  
minute and press up or down to change. To change the  
order in which the year, month, and day are displayed,  
highlight the date format and press the selector up or  
down. Press MENU/OK when settings are complete.  
2
Power management options will be displayed. Press the selector up or  
down to highlight one of the following options and then press MENU/OK:  
n POWER SAVE: Save battery power.  
3
o CLEAR DISPLAY: Choose for a brighter, higher quality display.  
R Thhee CCamera Clock  
If the battery is removed for an extended period, the camera clock will be reset and the  
language-selection dialog will be displayed when the camera is turned on.  
16  
First Steps  
Basic Photography and Playback  
Taking Pictures in R(EAUTO) Modde  
This section describes how to take pictures in R(EAUTO) mode.  
Select Emode.  
Turn the camera on and rotate the mode dial to E. The Rdisplay  
1
will appear in the LCD monitor.  
The oIccoon  
In Rmode, the camera continuously adjusts focus and searches for faces, in-  
creasing the drain on the battery. ois displayed in the LCD monitor.  
Scene IIcon (P23)  
The camera automatically selects the appropriate scene.  
R The camera analyses the scene and selects the preferred Emode when  
the shutter button is pressed halfway (P24).  
R To raise the flash when lighting is poor, press the flash pop-up button (P41).  
17  
Taking Pictures in R(EAUTO) Mode  
Frame the picture.  
Use the zoom control to frame the picture in the display.  
2
Zoom indicator  
Zoom out  
Zoom in  
Hoollddiinngg tthhee CCamera  
Hold the camera steady with both hands and brace your  
elbows against your sides. Shaking or unsteady hands can  
blur your shots.  
To prevent pictures that are out of focus or too dark (under-  
exposed), keep your fingers and other objects away from  
the lens and flash.  
18  
Basic Photography and Playback  
Taking Pictures in R(EAUTO) Mode  
Focus.  
3
Press the shutter button halfway to focus.  
Double  
beep  
R The lens may make a noise when the camera focuses;  
this is normal. If the subject is poorly lit, the AF-assist  
illuminatormaylight;see“CAFILLUMINATOR”(P 117)  
for information on disabling the illuminator.  
If the camera is able to focus, it will beep twice and the indicator lamp will  
glow green.  
If the camera is unable to focus, the focus frame will turn red, swill be dis-  
played, and the indicator lamp will blink green. Change the composition  
or use focus lock (P37).  
Basic Photography and Playback  
19  
Taking Pictures in R(EAUTO) Mode  
Shoot.  
4
Smoothly press the shutter button the rest of the way  
down to take the picture.  
Click  
Thhee SShhuuttter Button  
The shutter button has two positions. Pressing the shutter button halfway sets  
focus and exposure; to shoot, press the shutter button the rest of the way down.  
20  
Basic Photography and Playback  
Viewing Pictures  
Pictures can be viewed in the LCD monitor. When taking important photo-  
graphs, take a test shot and check the results.  
Press the abutton.  
The most recent picture will be displayed.  
1
View additional pictures.  
Press the selector right to view pictures in the order  
2
recorded, left to view pictures in reverse order.  
Press the shutter button to exit to shooting mode.  
Basic Photography and Playback  
21  
More on Photography  
Shhooottiinngg MMode  
Choose a shooting mode according to the scene or type  
of subject. To select a shooting mode, align the mode  
icon with the mark next to the mode dial.  
M, A, S, P: Select for full control over camera settings  
(P35), includingaperture(MandA)and/orshutterspeed  
(M and S).  
E: Improve clarity, reduce  
noise, increase dynamic range,  
or let the camera automatically  
adjust settings to suit the scene  
(P23).  
SP (SCENE POSITION): Choose  
a
scene suited to the subject or  
shooting conditions and let the  
camera do the rest (P33).  
B (AUTO): A simple “point-and-  
shoot” mode recommended for  
first-time users of digital cameras.  
Adv. (ADVANCED): Sophisticated techniques made easy  
(P25).  
22  
Shooting Mode  
E(EAUTO/EPriority)  
Optimize settings for your current subject or improve clarity, reduce  
noise, or enhance dynamic range. Rotate the mode dial to E  
and choose one of the following E modes in the shooting  
menu.  
R(EAUTO)  
The camera automatically selects the scene and E  
mode according to shooting conditions (P17).  
R If S is selected for OIMAGE SIZE in Rmode, the camera  
will automatically select the optimal image size.  
R R INTELLIGENT DIGITAL ZOOM is restricted to 2× (P116).  
Scene icon  
The Scene Icon  
The camera selects from the following scenes:  
Scene  
LAND-  
NIGHT  
GREEN- SKY &  
AUTO SCAPE NIGHT (TRIPOD) MACRO BEACH SUNSET SNOW SKY ERY GREENERY  
Main suubject  
Noon-portrait  
d*  
dc dd* dh*  
e
u
v
w
x
y
z
h*  
a
c
Noormal  
d
du dv dw dx dy  
dz  
gz  
cz  
az  
bz  
Portrait  
Backlit g gc  
gu gv gw gx gy  
Moving object  
Portrait and  
motion  
c
a
b
cc cd ch ce cu cv cw cx cy  
Noormal  
Backlit  
ac ad ah  
bc  
au av aw ax ay  
bu bv bw bx by  
* If nis displayed, the camera will take a series of shots (advanced anti-blur; P24).  
Q The mode selected may vary with shooting conditions. If the mode and subject do not match,  
select Bmode (P22) or choose SP (P33) and select a scene manually.  
More on Photography  
23  
Shooting Mode  
Advanced Anti Blur  
When nis displayed, the camera will take a series of exposures and combine them  
to form a single image, reducingnoise(mottling) and blur.  
R nis available when ON is selected in the shooting menu (P93) and the flash  
(P41) is off or set to auto.  
Q Some time may be required to combine the exposures into a single image. A  
single combined image may not be created if the subject or camera moves dur-  
ing shooting. Keep the camera steady during shooting and do not move the  
camera until shooting is complete.  
Q Frame coverage is reduced.  
The EIcon  
When the shutter button is pressed halfway, the camera chooses the pre-  
ferred Emode:  
S(RESOLUTION PRIORITY): Produces crisp, clear shots.  
T(HIGH ISO & LOW NOISE): Reduces noise in pictures taken at high sensitivities.  
U(D-RANGE PRIORITY): Increases the amount of detail visible in highlights.  
EPriority  
Select this mode to manually choose from the following Emodes:  
S(RESOLUTION PRIORITY): Choose for crisp, clear shots.  
T(HIGH ISO & LOW NOISE): Reduce noise in pictures taken at high sensitivities.  
U(D-RANGE PRIORITY): Increase the amount of detail visible in highlights.  
UDYNAMIC RANGE (P95) can be set to Z (1600%) and Y (800%).  
24  
More on Photography  
Shooting Mode  
Adv. ADVANCED  
This mode combines “point-and-shoot” simplicity with sophisti-  
cated photographic techniques. The AAdv. MODE option in  
the shooting menu can be used to choose from the following ad-  
vanced modes:  
r MOTION PANORAMA 360  
Follow an on-screen guide to take photos that will au-  
tomatically be joined to form a panorama. The camera  
zooms all the way out and remains fixed at the widest  
angle until shooting is complete.  
To select the angle through which you will pan the camera while shoot-  
ing, press the selector down. Press the selector left or right to highlight an  
1
angle and press MENU/OK.  
Press the selector right to view a choice of pan directions. Press the selec-  
tor left or right to highlight a pan direction and press MENU/OK.  
2
Press the shutter button all the way down to start recording. There is no  
need to keep the shutter button pressed during recording.  
3
More on Photography  
25  
Shooting Mode  
Pan the camera in the direction shown by the arrow.  
Shooting ends automatically when the progress bar is  
full and the panorama is complete.  
4
R Shooting ends if the shutter button is pressed all the way  
down during shooting. No panorama will be recorded if  
the shutter button is pressed before the camera has been  
panned through 120°.  
Progress bar  
Q Panoramas are created from multiple frames. The camera may in some cases record  
an greater or lesser angle than selected or be unable to stitch the frames together  
perfectly. The last part of the panorama may not be recorded if shooting ends be-  
fore the panorama is complete.  
Q Shooting may be interrupted if the camera is panned too quickly or too slowly. Pan-  
ning the camera in a direction other than that shown cancels shooting.  
Q The desired results may not be achieved with moving subjects, subjects close to  
the camera, unvarying subjects such as the sky or a field of grass, subjects that are  
in constant motion, such as waves and waterfalls, or subjects that undergo marked  
changes in brightness. Panoramas may be blurred if the subject is poorly lit.  
26  
More on Photography  
Shooting Mode  
z
Choose zfor seamless 360 ° panoramas that can be played back in a loop (P 62).  
R The tSAVE ORG IMAGE option in the setup menu can be used to record a v  
panorama in addition to a seamless zpanorama (P117).  
Q Depending on the subject and shooting conditions, the camera may produce  
distorted results or a v panorama. The top and bottom of the area visible in  
the shooting display are cropped out and white strips may appear at the top and  
bottom of the display.  
For Besst Results  
For best results, move the camera in a small circle at a steady speed, keeping the  
camera horizontal and being careful only to pan in the direction shown by the  
guides. If the desired results are not achieved, try panning at a different speed.  
More on Photography  
27  
Shooting Mode  
iPRO FOCUS  
The camera takes up to three shots each time the shutter  
button is pressed, softening the background to emphasize  
the main subject. The amount of softening can be adjusted  
before shooting by pressing the selector left or right. Use  
for portraits or photos of flowers similar to those produced  
by SLR cameras.  
R Softening can not be applied to background objects that are too close to the main  
subject. If a message stating that the camera can not create the effect is displayed  
when the camera focuses, try backing away from your subject and zooming in. The  
camera may also be unable to soften the background if the subject is moving; if  
prompted, check the results and try again.  
28  
More on Photography  
Shooting Mode  
jPRO LOW-LIGHT  
Each time the shutter button is pressed, the camera makes  
four exposures and combines them into a single photo-  
graph. Use to reduce noise and blur when photographing  
poorly lit subjects or static subjects at high zoom ratios.  
R A single combined photograph may not be created with some  
scenes or if the subject or camera moves during shooting. Do not move the camera  
until shooting is complete.  
PRO FOCUS/PRO LOW-LIGHT  
To save unprocessed copies of pictures taken in these modes, select ON for the  
tSAVE ORG IMAGE option in the setup menu (P117).  
Q Keep the camera steady during shooting.  
Q Frame coverage is reduced.  
More on Photography  
29  
Shooting Mode  
n MULTIPLE EXPOSURE  
Create a photograph that combines two exposures.  
Take the first shot.  
1
Press MENU/OK. The first shot will be shown superimposed on the view  
through the lens as a guide to taking the second shot.  
2
R To return to Step 1 and retake the first shot, press the selector left. To save the  
first shot and exit without creating a multiple exposure, press DISP/BACK.  
Take the second shot.  
3
4
Press MENU/OK to create the multiple exposure, or press the selector left to  
return to Step 3 and retake the second shot.  
30  
More on Photography  
Shooting Mode  
i INDIVID. SHUTTER 3D  
Take two shots from different angles to create a 3D image.  
To choose the order in which the pictures are taken,  
1
press the selector right to display the current order and  
then press the selector left or right to choose from the  
options below.  
G: Take the left shot first.  
H: Take the right shot first.  
Press the shutter button to take the first shot.  
2
R To exit without recording a picture, press DISP/BACK.  
The first shot will be shown superimposed on the view through the lens.  
Using it as a guide, frame the second shot and press the shutter release  
button.  
3
R The 3D effect may not be visible with some sub-  
jects or under some shooting conditions. For  
best results, the distance the camera is moved  
/
/
between shots should be about 1 30th to 1 50th of  
the distance to the subject.  
R The camera will turn off automatically if no operations performed for the time  
selected for NAUTO POWER OFF (P114).The first shot will not be saved if the  
second shot is not taken before the camera turns off.  
More on Photography  
31  
Shooting Mode  
Viewing and Printing 3D Images  
The camera displays images in 2D. Press the selector down to toggle between the  
first and second shots.  
Devices equipped for 3D display, such as the FINEPIX REAL 3D V3 digital photo frame or  
FINEPIX REAL 3D W3 digital camera, will display the images in 3D.  
3D prints can be ordered from http://www.fujifilm.com/3d/print/  
The supplied software displays 3D anaglyph images. 3D photos can also be viewed  
using other applications that support the MP format.  
3D TVs that support the MP format can display images in 3D. See the manual for  
your TV for details.  
Q Images are not output in 3D when printed directly from the camera.  
Q 3D images are displayed in 2D in slide shows and when output on a conventional  
TV.  
Q 3D images can not be edited or retouched.  
Note: The MP (Multi-Picture) format is a CIPA standard for files containing multiple still images. Files  
in MP format are referred to as “MP files” and have the extension “*.MPO. The camera uses this  
format for 3D images.  
32  
More on Photography  
Shooting Mode  
SP SCENE POSITION  
The camera offers a choice of “scenes,” each adapted to particular  
shooting conditions or a specific type of subject. Use the ASCENE  
POSITION option in the shooting menu to choose the scene as-  
signed to the SP position on the mode dial.  
Scene  
Description  
CNATURAL & N The camera takes two shots: one without the flash and one with.  
DNATURAL LIGHT Capture natural lighting under low-light conditions.  
h PORTRAIT  
Choose for portraits.  
Z PORTRAIT  
Choose for a smooth skin effect when shooting portraits.  
ENHANCER  
l DOG  
Choose when photographing dogs.  
mCAT  
Choose when photographing cats.  
MLANDSCAPE  
NSPORT  
O NIGHT  
Choose for daylight shots of buildings and landscapes.  
Choose when photographing moving subjects.  
Choose this mode for poorly lit twilight or night scenes.  
HNIGHT (TRIPOD) Choose this mode for slow shutter speeds when shooting at night.  
Slow shutter speeds are used to capture the expanding burst of light from  
a firework.  
p FIREWORKS  
QSUNSET  
RSNOW  
s BEACH  
Choose this mode to record the vivid colors in sunrises and sunsets.  
Choose for crisp, clear shots that capture the brightness of scenes dominat-  
ed by shining white snow.  
Choose for crisp, clear shots that capture the brightness of sunlit beaches.  
More on Photography  
33  
Shooting Mode  
Scene  
Description  
f UNDERWATER Reduces the blue cast typically associated with underwater lighting.  
U PARTY  
V FLOWER  
WTEXT  
Capture indoor background lighting under low-light conditions.  
Choose for vivid close-ups of flowers.  
Take clear pictures of text or drawings in print.  
l DOG/mCAT  
The camera focuses on the faces of dogs or cats that are facing the camera, and the  
self-timer menu offers a nAUTO RELEASE option that releases the shutter auto-  
maticallywhenapetisdetected(P43). Duringplayback,imagesearch(P59)canbe  
used to search for pictures taken in either mode.  
R Although camera can detect many different breeds of dogs and cats, results may  
vary with the breed and shooting conditions. The camera may fail to detect pets  
with dark-colored faces or long hair covering their entire face. If a dog or cat is not  
detected, the camera focuses on the subject at the center of the frame.  
34  
More on Photography  
Shooting Mode  
M MANUAL  
In this mode, you control both shutter speed and aperture.  
Press the selector up (d) to highlight shutter speed or  
aperture and use the command dial to adjust the high-  
lighted item. If desired, exposure can be altered from the  
value selected by the camera.  
Thhee EExposuree IInnddicator  
The amount the picture will be under- or over-exposed at cur-  
rent settings is shown by the exposure indicator.  
A APERTURE PRIORITY AE  
You choose the aperture using the command dial, while the camera  
adjusts shutter speed for optimal exposure.  
Q If the correct exposure can not be achieved at the selected  
aperture, shutter speed will be displayed in red. Adjust aper-  
ture until the correct exposure is achieved. If the subject is  
outside the metering range of the camera, the shutter speed  
F3.5  
display will show “---. Press the shutter button halfway to  
measure exposure again.  
More on Photography  
35  
Shooting Mode  
S SHUTTER PRIORITY AE  
You choose the shutter speed using the command dial, while the  
camera adjusts aperture for optimal exposure.  
Q If the correct exposure can not be achieved at the selected  
shutter speed, aperture will be displayed in red. Adjust shut-  
ter speed until the correct exposure is achieved. If the subject  
is outside the metering range of the camera, the aperture  
1000  
display will show “F---. Press the shutter button halfway to  
measure exposure again.  
P PROGRAM AE  
The camera sets exposure automatically.  
Q If the subject is outside the metering range of the camera, the shutter speed and  
aperture displays will show---. Press the shutter button halfway to measure expo-  
sure again.  
36  
More on Photography  
Focus Lock  
To compose photographs with off-center subjects:  
Focus: Position the subject in the focus frame (  
)
1
2
3
and press the shutter button halfway to lock focus  
and exposure. Focus and exposure will remain locked  
while the shutter button is pressed halfway (AF/AE  
lock).  
Recompose: Keep the button pressed halfway.  
Shoot: Press the button all the way down.  
More on Photography  
37  
Focus Lock  
Autoffocus  
Although the camera boasts a high-precision autofocus system, it may be unable to  
focus on the subjects listed below. If the camera is unable to focus, focus on another  
subject at the same distance and use focus lock to recompose the photograph.  
Very shiny subjects such as mirrors or car bodies.  
Subjects that show little contrast with the background  
Fast-moving subjects.  
(for example, subjects in clothing that is the same color  
Subjects photographed through a window or other re- as the background).  
flective object.  
Subjects positioned in front of or behind a high-contrast  
Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a  
light, such as hair or fur.  
Insubstantial subjects, such as smoke or flame.  
subject photographed against a backdrop of highly con-  
trasting elements).  
38  
More on Photography  
dExposure Coompeenssaation  
To adjust exposure compensation when photographing  
very bright, very dark, or high-contrast subjects, press  
the selector up (d). Press the selector up or down or  
use the command dial to choose an exposure compen-  
sation value and then press MENU/OK.  
Choose positive (+) values  
to increase exposure  
Choose negative (–) values  
to reduce exposure  
R A dicon and exposure indicator are displayed at settings other than 0. Exposure  
compensation is not reset when the camera is turned off; to restore normal expo-  
sure control, choose a value of 0.  
R Turn the flash off when using exposure compensation.  
More on Photography  
39  
FMaacroo Mooddee ((CClloossee--uups)  
For close-ups, press the selector left (F) and select F.  
When macro mode is in effect, the camera focuses on  
subjects near the center of the frame. Use the zoom  
control to compose pictures (P18).  
P
To exit macro mode, press the selector left (F) and select  
OFF  
MACRO  
OFF.  
Close-up shots  
R Use of a tripod is recommended to prevent blur caused by camera shake.  
R The shadow cast by the lens may appear in photographs taken with the flash at  
very short ranges. Zoom out or increase the distance to the subject.  
40  
More on Photography  
NUsing the Flashh ((SSuupper-Intelliigent Flash)  
When the flash is used, the camera’s Super-Intelligent Flash system instantly  
analyzes the scene based on such factors as the brightness of the subject,  
its position in the frame, and its distance from the camera. Flash output and  
sensitivity are adjusted to ensure that the main subject is correctly exposed  
while preserving the effects of ambient background lighting, even in dimly-lit  
indoor scenes. Use the flash when lighting is poor, for example when shoot-  
ing at night or indoors under low light.  
Press the flash pop-up button to raise the flash.  
1
Press the selector right (N) and choose from the fol-  
lowing flash modes:  
2
Option  
Description  
The flash fires when required. Recommended in most  
situations.  
AUTO/K*  
The flash fires whenever a picture is taken. Use for back-  
N/L* lit subjects or for natural coloration when shooting in  
bright light.  
Capture both the main subject and the background  
O/M* under low light (note that brightly lit scenes may be  
overexposed).  
* Jicon indicates that Intelligent Face Detection and red-eye removal are on and will be used  
to minimize “red-eye” caused by the flash reflecting from the retinas of portrait subjects.  
More on Photography  
41  
NUsing the Flash (Super-Intelligent Flash)  
R Changing the angle of the flash turns the flash off.  
R Lower the flash where flash photography is prohibited or to capture natural lighting  
under dim light. We also recommend that you lower the flash when the camera is  
off.  
R If the flash will fire, pwill be displayed when the shutter button is pressed halfway.  
At slow shutter speeds, kwill appear in the display to warn that pictures may be  
blurred; use of a tripod is recommended.  
R The flash may fire several times with each shot. Do not move the camera until  
shooting is complete.  
R The flash may cause vignetting.  
42  
More on Photography  
hUsing thee Selff-Timer  
To use the self-timer, press the selector down (h) and  
choose from the following options:  
P
OFF  
OFF  
Option  
T(OFF)  
Description  
Self-timer off.  
The shutter is released automatically when the camera detects the face of a cat  
or dog (P34).  
n( AUTO RELEASE)  
The shutter is released automatically when the camera detects a human portrait  
subject facing the camera. Use for portraits of babies.  
o( AUTO RELEASE)  
The shutter is released ten seconds after the shutter button is pressed. Use for  
self-portraits. The self-timer lamp on the front of the camera lights when the  
timer starts and begins to blink shortly before the photo is taken.  
S(10 SEC)  
The shutter is released two seconds after the shutter button is pressed. Use to  
reduce blur caused by the camera moving when the shutter button is pressed.  
The self-timer lamp will blink as the timer counts down.  
R(2 SEC)  
More on Photography  
43  
The Fn BBuutttton  
The role played by the Fn button can be se-  
lected using the F Fn BUTTON option in the  
setup menu (P114).  
The following options are available:  
ISO (P90)/IMAGE SIZE (P91)/IMAGE QUALITY (P94)/  
RAW (F770EXR Only) (P117)/DYNAMIC RANGE (P95)/  
FILM SIMULATION (P93)/PHOTOMETRY (P98)/AF MODE (P99)/  
FACE RECOGNITION (P51)/FACE DETECTION (P45)/  
LANDMARK NAVIGATOR (F770EXR Only) (P71)  
R The F Fn BUTTON menu can also be displayed by pressing and holding the Fn  
button.  
44  
More on Photography  
bInnttelligent Facce Deteeccttiioonn  
Intelligent Face Detection sets focus and exposure for human faces anywhere  
in the frame, preventing the camera from focusing on the background in  
group portraits. Choose for shots that emphasize portrait subjects.  
To use Intelligent Face Detection, press MENU/OK to dis-  
play the shooting menu and select ON for bFACE  
DETECTION. Faces can be detected with the camera  
in vertical or horizontal orientation; if a face is detected,  
it will be indicated by a green border. If there is more  
than one face in the frame, the camera will select the  
face closest to the center; other faces are indicated by  
white borders.  
Q In some modes, the camera may set exposure for the frame as a whole rather than  
the portrait subject.  
Q If the subject moves as the shutter button is pressed, their face may not be in the  
area indicated by the green border when the picture is taken.  
More on Photography  
45  
RContinuouus Shhooooting  
To capture motion in a series of pictures, press MENU/OK,  
select RCONTINUOUS in the shooting menu (P97),  
and choose from the options listed in this section.  
Option  
F770EXR  
F750EXR  
OAE BKT  
(P50)  
(P50)  
(P50)  
XFILM SIMULATION BKT  
YDYNAMIC RANGE BKT  
I TOP n  
PBEST FRAME CAPTURE  
LFINAL n  
(P47)  
(P48)  
(P47)  
(P48)  
OFF  
R The flash turns off automatically. The previously selected flash mode is restored  
when OFF is selected for RCONTINUOUS.  
R Frame rate varies with shutter speed.  
R Focus and exposure are determined by the first frame in each series.  
R The number of pictures that can be taken in a single burst varies with the scene  
and camera settings. The number of pictures that can be recorded depends on the  
memory available.  
46  
More on Photography  
RContinuous Shooting  
ITOP n (F770EXR)  
The camera takes photographs while the shutter button is pressed. To choose  
the frame rate:  
Press the selector right when the camera is in shooting  
mode.  
1
Press the selector up or down to choose a frame rate  
and press MENU/OK to select and return to shooting  
mode.  
2
ITOP n (F750EXR)  
The camera takes photographs while the shutter button is pressed. To choose  
the frame rate and maximum number of shots per burst:  
Press the selector right when the camera is in shooting  
mode.  
1
Highlight the current frame rate or number of shots and  
press the selector right, then press selector up or down  
to choose a new value and press MENU/OK to select.  
2
3
Press DISP/BACK to return to shooting mode when settings are complete.  
More on Photography  
47  
RContinuous Shooting  
LFINAL n (F750EXR Only)  
The camera takes up to 40 pictures, but only  
the last shots are recorded. The number of  
shots recorded can be selected by press-  
ing the selector right while the camera is in  
shooting mode.  
Up to 40 shots  
Shutter button  
pressed  
Shutter button  
released  
Final n shots recorded  
R Only one photo is taken if the self-timer is used.  
PBEST FRAME CAPTURE (F770EXR Only)  
The camera takes a series of pictures, starting before and ending after the  
shutter button is pressed.  
Press the selector right when the camera is in shooting mode.  
1
Highlight the current frame rate and press the selector right, then press  
selector up or down to choose a new value and press MENU/OK to select.  
2
Q Some frame rates may reduce the number of shots available.  
Shots per burst  
Highlight the number of shots and press the selector  
right. Press the selector up or down to choose the num-  
ber of shots in each burst and left or right to choose  
3
their distribution (the number on the left is taken before  
and the number on the right after the shutter button  
is pressed). Press MENU/OK when settings are complete  
and press DISP/BACK to return to shooting mode.  
Distribution  
48  
More on Photography  
RContinuous Shooting  
Take photographs. The camera begins recording while the shutter button  
is pressed halfway, and completes the burst when the shutter button is  
pressed all the way down. The illustration shows a burst of eight shots,  
three before the shutter button is pressed and four after.  
4
Shutter button  
pressed halfway  
Shutter button pressed all  
the way down  
“Before” shots  
“After” shots  
Q If the shutter button is pressed all the way down before the number of frames  
selected for thebeforeportion is recorded, the remaining frames will be taken  
after the shutter button is pressed all the way down.  
Q If the shutter button is pressed halfway for an extended period, the camera may  
record the burst before the shutter button is pressed all the way down.  
More on Photography  
49  
RContinuous Shooting  
OAE BKT  
Each time the shutter button is pressed, the camera takes three shots: one us-  
ing the metered value for exposure, the second overexposed by the amount  
selected for JAE BKT EV STEPS in the shooting menu (P100), and the third  
underexposed by the same amount (the camera may not be able to use the  
selected bracketing increment if the amount of over- or under- exposure ex-  
ceeds the limits of the exposure metering system).  
XFILM SIMULATION BKT  
Each time the shutter button is pressed, the camera takes one shot and pro-  
cesses it to create three copies with different PFILM SIMULATION settings  
(P93): cPROVIA/STANDARD for the first, dVelvia/VIVID for the second,  
and eASTIA/SOFT for the third.  
YDYNAMIC RANGE BKT  
Each time the shutter button is pressed, the camera takes three shots at differ-  
entUDYNAMICRANGEsettings(P95):V100%fortherst,W200%for  
the second, and X400% for the third (NISO can not exceed 3200; values  
less than 400 are not available when O is selected for OIMAGE SIZE).  
50  
More on Photography  
nFace Recognnition  
The camera can store information on the face and personal  
details (name, relationship, and birth date) of portrait sub-  
jects and assign these subjects priority for Intelligent Face  
Detection or display their names and other information  
during playback.  
Happy Birthday!  
Adding New Faces  
Follow the steps below to add faces to the face recognition database.  
Select REGISTER.  
Select REGISTER for nFACE RECOGNITION in the shooting menu.  
1
R To disable face recognition, select OFF.  
Take a photograph.  
After checking that the subject is facing the camera,  
2
frame the subject using the guides and take the pho-  
tograph.  
R If an error is displayed, take the photograph again.  
More on Photography  
51  
nFace Recognition  
Enter face recognition data  
Press MENU/OK to display face recognition data and enter the following in-  
3
formation:  
NAME: Enter a name of up to 14 characters and press MENU/OK.  
BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.  
CATEGORY: Choose the option that describes your relationship to the sub-  
ject and press MENU/OK.  
R If you attempt to zoom in on the face of a person indicated by a green border  
in the face recognition database on their birthday, the camera will display their  
name and the messageHappy Birthday!”  
52  
More on Photography  
nFace Recognition  
Viewing, Editing, and Deleting Existing Data  
Follow the steps below to view, edit, or delete face recognition data.  
Select VIEW & EDIT for nFACE RECOGNITION.  
1
2
3
Select a face.  
View or edit face recognition data.  
The name, category, or birth date can be edited as described in Step 3 of  
“Adding New Faces”(P52). To retake the photo, select REPLACING IMAGE  
and shoot a new portrait as described above.  
R To delete face recognition data for the selected subject, select ERASE.  
Adding Faces Automatically  
To automatically add frequently-photographed subjects to the face recogni-  
tion database, select ON for AUTO REGISTRATION in the face recognition  
menu. If the camera detects a face that has been photographed many times  
without being added to the database, it will display a message prompting you  
to create a new face recognition entry. Press MENU/OK and enter face recogni-  
tion data.  
R The camera may sometimes fail to recognize new faces automatically. If necessary,  
faces can be added manually using the REGISTER option.  
More on Photography  
53  
nFace Recognition  
Face Recognition  
The camera can store up to eight faces. If you attempt to add a ninth face, a confir-  
mation dialog will be displayed; use VIEW & EDIT to make room for new faces by  
deleting existing data. AUTO REGISTRATION is disabled if there are already data for  
eight faces.  
WhenIntelligentFaceDetection(P45)isonandtheframecontainsmultiplesubjects  
from the face recognition database, the camera displays the name of the subject  
that will be used to set focus and exposure (the subject shown by the green frame).  
If no name is entered, the camera will show “---. Subjects identified using face rec-  
ognition but not used to set focus and exposure are shown by orange frames, other  
subjects by white frames.  
Q The camera may fail to identify subjects in the face recognition database if they  
are not facing the camera or are only partly in the frame, or if details of the sub-  
jectsfaces or expressions differ markedly from those in the database.  
54  
More on Photography  
More on Playback  
Playback OOpptions  
To view the most recent picture in the LCD monitor, press the abutton.  
Press the selector right to view pictures in the order recorded, left to view  
pictures in reverse order. Keep the selector pressed to scroll rapidly to the  
desired frame.  
R Pictures taken using other cameras are indicated by a m(“gift image”) icon during  
playback.  
Continuous Shooting  
In the case of pictures taken in continuous shooting mode, only the first frame  
of each series will be displayed. Press the selector down to view the other  
pictures in the series.  
IFavorites: Rating Pictures  
To rate the picture currently displayed in full-frame playback, press DISP/BACK  
and press the selector up and down to select from zero to five stars.  
55  
Playback Options  
Playback Zoom  
Select ito zoom in on pictures displayed in single-frame playback; select  
jto zoom out. When the picture is zoomed in, the selector can be used to  
view areas of the image not currently visible in the display.  
Zoom indicator  
Navigation window shows  
portion of image currently  
displayed in LCD monitor  
Press DISP/BACK to exit zoom.  
R Rotate the command dial to view other pictures without changing the zoom ratio.  
R The maximum zoom ratio varies with image size. Playback zoom is not available  
with cropped or resized copies saved at a size of a or smaller.  
56  
More on Playback  
Playback Options  
Multi-Frame Playback  
Selecting jwhen a picture is shown full-frame in the LCD monitor displays  
the current image with previous and following images in the background.  
Select jto increase the number of images displayed to two, nine, or one  
hundred, ito view fewer images.  
When two or more images are displayed, use the selector to highlight images  
and press MENU/OK to view the highlighted image full frame. In the nine- and  
hundred-frame displays, use the selector to view more pictures.  
More on Playback  
57  
ADeleting Piictures  
To delete individual pictures, multiple selected  
pictures, or all pictures, press MENU/OK, select  
AERASE (P103), and choose from the options  
below. Note that deleted pictures can not be re-  
covered. Copy important pictures to a computer or other storage device before  
proceeding.  
Option  
FRAME  
Description  
Press the selector left or right to scroll through pictures and press MENU/OK to delete  
the current picture (a confirmation dialog is not displayed).  
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks  
SELECTED or print orders are shown by S). When the operation is complete, press DISP/BACK  
FRAMES to display a confirmation dialog, then highlight OK and press MENU/OK to delete the  
selected pictures.  
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all  
unprotected pictures (if a memory card is inserted, only the pictures on the memory  
ALL FRAMES card will be affected; the pictures in internal memory are only deleted if no memory  
card is inserted). Pressing DISP/BACK cancels deletion; note that any pictures deleted  
before the button was pressed can not be recovered.  
R Protected pictures can not be deleted. Remove protection from any pictures you  
wish to delete (P105).  
R If a message appears stating that the selected images are part of a DPOF print order,  
press MENU/OK to delete the pictures.  
58  
More on Playback  
bImmaage SSearch  
Search for pictures.  
Select bIMAGE SEARCH in the playback menu (P103), highlight one of  
the following search criteria, and press MENU/OK:  
BY DATE: Search by date.  
1
BY GPS LOCATION NAME (F770EXR Only): Search by location name (location  
names that do not begin with a letter from A to Z are listed in the search  
conditions under#”).  
BY FACE: Search for faces from the face recognition database.  
BY IFAVORITES: Search by rating.  
BY SCENE: Search by scene.  
BY TYPE OF DATA: Find all still pictures or all movies.  
BY UPLOAD MARK: Find all pictures selected for upload to a specified desti-  
nation.  
Select a search condition. Only pictures that match the search condition  
will be displayed. To delete or protect selected pictures or to view the  
searchresultsinaslideshow, pressMENU/OK andchooseAERASE(P103),  
DPROTECT (P105), or ISLIDE SHOW (P102).  
2
More on Playback  
59  
mPhotooBBoook Assist  
Create books from your favorite photos.  
Creating a PhotoBook  
Select NEW BOOK for mPHOTOBOOK ASSIST in the playback menu  
(P101) and choose from the following options:  
SELECT FROM ALL: Choose from all available pictures.  
SELECT BY IMAGE SEARCH: Choose from pictures matching selected search  
conditions (P59).  
1
R Movies, 3D photos, and photographs a or smaller can not be selected for pho-  
tobooks.  
Scroll through the images and press the selector up to select or deselect.  
To display the current image on the cover, press the selector down. Press  
MENU/OK to exit when the book is complete.  
2
3
R The first picture selected becomes the cover image. Press the selector down to  
select a different image for the cover.  
Select COMPLETE PHOTOBOOK (to select all photos or all photos match-  
ing the specified search conditions for the book, choose SELECT ALL). The  
new book will be added to the list in the photobook assist menu.  
Q Books can contain up to 300 pictures.  
Q Books that contain no photos are automatically deleted.  
60  
More on Playback  
mPhotoBook Assist  
Viewing Photobooks  
Highlight a book in the photobook assist menu and press MENU/OK to display  
the book, then press the selector left or right to scroll through the pictures.  
Editing and Deleting Photobooks  
Display the photobook and press MENU/OK. The following options will be dis-  
played; select the desired option and follow the on-screen instructions.  
EDIT: Edit the book as described inCreating a PhotoBook(P60).  
ERASE: Delete the book.  
Photoobooks  
Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-  
ware.  
More on Playback  
61  
Viewing Panoramas  
If you press the selector down when a panorama is displayed full frame, the  
camera will play back the picture from left to right or from bottom to top. To  
pause playback, press the selector down; press the selector down again to  
resume. To exit to full-frame playback, press the selector up while panorama  
playback is in progress. Once displayed in full-frame playback, panoramas can  
be zoomed in or out using the zoom control or deleted by pressing the selec-  
tor up (b).  
R zpanoramas play back in an endless loop (P 27); the playback direction can be  
controlled by pressing the selector left or right. The camera will not turn off auto-  
matically while playback is in progress (P 114).  
62  
More on Playback  
Viewiing Phootoo IInformation  
Photo information can be viewed by pressing DISP/BACK to cycle through indi-  
cators (P6) until the following display appears:  
Dynamic range  
Sensitivity  
Film simulation  
Exposure compensation  
Picture (overexposed areas blink on and o)  
Histogram  
Image size and quality  
Shutter speed/aperture  
q
e
t
i
!
!
w
r
y
Flash mode  
White balance  
u
Frame number  
o
Histoograms  
Histograms show the distribution of tones in the im-  
age. Brightness is shown by the horizontal axis, the  
number of pixels by the vertical axis.  
Pixel brightness  
Shadows Highlights  
Optimal exposure: Pixels are distributed in an even  
curve throughout the tone range.  
Overexposed: Pixels are clustered on the right side of  
the graph.  
Underexposed: Pixels are clustered on the left side of  
the graph.  
More on Playback  
63  
Viewing Photo Information  
Zoooommiinngg iinn oonn tthe Focus Point  
Press the selector down to zoom in on the focus point. Press  
DISP/BACK or MENU/OK to return to full-frame playback.  
64  
More on Playback  
GPS (F770EXR Only)  
Recording GPS Data with Pictures  
To record GPS data with new pictures, press the Fbut-  
ton and select one of the following options for RSET-  
UP > LOCATION SEARCH in the F-mode menu (P92).  
PERMANENTLY ON: The camera continues to update GPS data for up to 3 hours  
after being turned off. The camera will be quicker to display GPS data when  
turned on, but the drain on the battery will increase. Note that GPS data is  
not updated at battery levels of Bor below.  
WHEN SWITCHED ON: The camera updates GPS data only when on. The camera  
may need some time to acquire GPS data when turned on. This option is  
selected automatically at battery levels of Band below.  
R GPS works best outdoors under clear skies.  
During shooting, GPS data are displayed in the monitor as  
shown at right. Signal strength is indicated by the number  
of bars; O is displayed when the camera is searching for  
a signal, Qif the camera is in GPS demo mode, and Pif  
no signal is detected. The most current location is shown  
by a place name or (if no place name is available) by the  
longitude and latitude.  
Location  
Signal  
strength  
R LOCATION INFO (P92) can be used to choose whether the camera shows place  
names or latitude and longitude. Choose OFF to hide GPS information.  
65  
Recording GPS Data with Pictures  
Q Using GPS increases the drain on the battery, causing battery performance to drop  
at low temperatures.  
Q The receiver may have an error of a few hundred meters (yards).  
Q The camera may be unable to receive GPS data in some locations. If possible,  
choose an outdoor location with few obstructions when turning the camera on.  
Q The position recorded when a photo is taken may differ from the actual location if  
some time has passed since the camera was last able to update GPS data.  
Q Select OFF for LOCATION SEARCH (P92) and TRACKING DATA (P92) in the  
RSET-UP menu when in a hospital and before takeoff and landing if traveling  
by air.  
Q Place names are current as of the date on which the map database was created  
(P139) and will not be updated to reflect any changes after that date.  
Q Place name data are unavailable in some countries and regions. If no name is avail-  
able, the latitude and longitude will be displayed for a few seconds.  
GPS  
The camera may be unable to receive GPS data if the antenna (P2) is obstructed or  
when underground, underwater, under a bridge or overpass, inside a vehicle, build-  
ing, tunnel, or metal briefcase, between tall buildings, or in the vicinity of cell phones  
or other devices that broadcast in the 1.5GHz band.  
Obey all local regulations regarding the use of GPS devices. Note that the use of  
GPS devices is restricted in some countries, including the People’s Republic of China.  
Before going abroad, consult with the embassy or a travel agent. The camera may  
display P(no signal) in locations in which restrictions apply.  
66  
GPS  
GPS Tracking  
To record a GPS track log to a file on the memory card, select ON for RSET-UP >  
TRACKING DATA (P92; be sure the clock is set to the correct time and date as de-  
scribed on page 16). A new log file is created when ON is selected and once every  
24 hours thereafter. Note that the camera will continue to update GPS data even  
when off, increasing the drain on the battery.  
Q GPS logs can be viewed in MyFinePix Studio.  
Q See “GPS(P66) for information on using GPS.  
Q The indicator lamp glows orange during recording GPS data even when the cam-  
era is turned off while ON is selected. Select OFF before removing the battery or  
memory card. Failure to observe this precaution could damage the card.  
Q Tracking ends after the camera has been off for 3 hours consecutively.  
Q Signal strength will be displayed in yellow and GPS data will not be logged if the  
battery is low (Bor less), no memory card is inserted, or the memory card has less  
than 32MB free. To resume the log, select ON after inserting a charged battery or a  
memory card with more than 32MB free.  
Q GPS tracking may be interrupted during movie recording and playback.  
GPS  
67  
GPS Tracking  
Using GPS to Set the Caameraa CClock  
The AUTO TIME CORRECTION item in the RSET-UP menu can be used to syn-  
chronize the camera clock to the time provided by GPS satellites. Select ON (W/o  
SUMMERTIME) to set the clock to local standard time or ON (W/ SUMMERTIME) to  
set the clock to local daylight saving time. If daylight saving time is in effect, time will  
automatically be advanced one hour.  
Q If the camera is able to receive GPS data, the clock will be synchronized when the camera  
is turned off.  
Q Selecting g LOCAL for NTIME DIFFERENCE turns AUTO TIME CORRECTION off. Note  
that GPS may not provide the correct time in some locations; if necessary select OFF for  
AUTO TIME CORRECTION and set the clock using FDATE/TIME (P111).  
68  
GPS  
Viewing GPS Data  
GPS icon  
During playback, pictures for which GPS data exist are in-  
dicated by a Jicon. GPS data are shown for a few sec-  
onds each time the picture is displayed.  
Photo Navigation  
To show the direction and distance from your present position to the location  
where a picture was taken:  
Select an option other than OFF for RSET-UP > LOCATION SEARCH and  
confirm that the camera is receiving GPS data (P102).  
1
Display a picture with a Jicon.  
2
3
Select RPHOTO NAVIGATION in the playback menu  
(P101). The approximate direction and distance to the  
location where the picture was taken are displayed as  
shown, using the units selected for RSET-UP > km/mile  
(P102).Distancesover1000unitsareindicatedby“>,those  
under 100 units by<.  
R Photo navigation ends when the next picture is displayed.  
GPS  
69  
Viewing GPS Data  
Copying GPS Data to Other Images  
GPS data can be copied from other pictures to images that lack correct GPS  
information.  
Select RLOCATION INFO COPY in the playback menu (P103).  
1
2
Press the selector left or right to display the source image for the GPS data  
and press MENU/OK.  
Press the selector left or right to display the destination and press MENU/OK  
to copy the data to the image.  
3
Q GPS data can not be deleted. When GPS data are copied, however, the original GPS  
data for the destination image is replaced by the data for the source image; the  
original data for the destination image, if any, can not be recovered.  
Q The camera may be unable to copy GPS data to or from images created on other  
devices.  
70  
GPS  
RLaannddmmaarrkk NNaavviiggaattor  
Landmark navigation uses GPS and the camera map da-  
tabase to show information on objects the display (this is  
sometimes known as “augmented reality,” or AR). To view  
landmark information, select RLANDMARK NAVIGA-  
TOR in the F-mode menu (P101, 90).  
The display varies with camera orientation:  
• For an “AR” display, hold the camera • For a “radar” display, hold the cam-  
with the lens pointed forward. era with the lens pointed down.  
R Use the zoom control to zoom in and out. To display additional information, press  
the selector left or right to highlight landmarks and press MENU/OK. Press the selec-  
tor down to choose the landmark type. Press DISP/BACK to return to playback or  
press the shutter button halfway to exit to shooting mode.  
R Landmarks can be added using RMY LANDMARK REGISTER (P97).  
GPS  
71  
RLandmark Navigator  
Q Landmark information is based on the most recently-received GPS data; it is intend-  
ed as a guide only and may be unavailable or contain errors under some conditions,  
including when the camera is held upside down. Headings rely on a magnetic  
compass and may not be correct if the camera is inside a building or vehicle or  
close to metal objects, magnets, high-voltage power lines, or electrical equipment.  
Caalliibbrration  
A f icon indicates that the camera’s internal sensor requires  
calibration. Move the camera slowly in a large figure eight while  
rotating your wrist as shown.  
If the icon does not clear from the display, choose a different location and try again.  
Q To ensure that you do not drop the camera, use the strap (P 1).  
72  
GPS  
Movies  
Recordiinngg MMoviess  
Press Fto shoot a movie. During recording, the following indica-  
tors will be displayed and sound will be recorded via the built-in  
microphone (be careful not to cover the microphone during re-  
cording).  
yREC icon  
Number of photos that  
can be taken during  
recording  
Time remaining  
To end recording, press the Fbutton again. Recording ends automatically  
when the movie reaches maximum length or memory is full.  
R Zoom can be adjusted while recording is in progress.  
R If the subject is poorly lit, the AF-assist lamp may light to assist the focus operation.  
To turn the AF-assist lamp off, select OFF for CAF ILLUMINATOR in the setup  
menu (P117).  
R Focus, exposure, and white balance are adjusted automatically throughout record-  
ing. The color and brightness of the image may vary from that displayed before  
recording begins.  
R Sounds made by the camera may be recorded.  
73  
Recording Movies  
Takiinngg Photographs DDuriinngg RReecorrding  
Press the shutter button to take a photograph during recording.  
R See page 100 for information on choosing how photographs are recorded.  
R The photo is saved separately from the movie and does not appear as part of the movie.  
Q Photos can not be taken while a high-speed movie is being recorded.  
Q The number of photos that can be taken is limited.  
Q The indicator lamp lights while movies are being recorded. Do not open the bat-  
tery chamber during shooting or while the indicator lamp is lit. Failure to observe  
this precaution could prevent the movie from being played back.  
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.  
This is normal and does not indicate a malfunction.  
Q The temperature of the camera may rise if it is used to record movies for an ex-  
tended period or if the ambient temperature is high. This is normal and does not  
indicate a malfunction.  
Movie Frame Size  
Before recording, select a frame size using the WMOVIE MODE option in the  
shooting menu (P100).  
Option  
Description  
i1920 (1920 × 1080) Full HD (High Definition).  
h1280 (1280 × 720) High Definition.  
f( 640 × 480)  
Standard definition.  
k640 × 480 (80 fps)  
High speed movie. Sound is not recorded, and focus, exposure, and white  
k320 × 240 (160 fps) balance are not adjusted automatically. Black bands appear at the top and  
bottom of movies recorded at k320 × 112.  
k320 × 112 (320 fps)  
74  
Movies  
Viewing Movvies  
100-006  
During playback, movies are displayed in the LCD monitor  
as shown at right. The following operations can be per-  
formed while a movie is displayed:  
12/31/2050 10:00 AM  
Option  
Description  
Press the selector down to start playback. Press again to  
pause. While playback is paused, you can press the selec-  
tor left or right to rewind or advance one frame at a time.  
Start/pause  
playback  
End playback/  
delete  
Press the selector up to end playback.  
Press the selector left or right to adjust playback speed dur-  
ing playback.  
Adjust speed  
Press MENU/OK to pause playback and display volume con-  
trols. Press the selector up or down to adjust the volume  
and press MENU/OK to exit. Volume can also be adjusted  
from the setup menu.  
Adjust voolume  
Playbacck Speed  
Arrow  
Press the selector left or right to adjust playback speed. Speed is  
shown by the number of arrows (Mor N).  
Q Do not cover the speaker during playback.  
Movies  
75  
Connections  
Viewing Pictures on TV  
Connect the camera to a TV to show pictures to a group.  
Turn the camera off.  
1
Connect the supplied A/V cable as shown below.  
2
Connect yellow plug to video-in jack  
Insert into  
USB multi-connector  
Connect white plug to audio-in jack  
R Image quality drops during movie playback.  
76  
Viewing Pictures on TV  
Coonnnneeccttiinngg tthhee CCamera to High Definitioon (HDD) TVs  
An HDMI cable (available from third-party suppliers) can be used to connect the  
camera to High Definition (HD) devices (playback only). The USB and A/V cables  
can not be used while an HDMI cable is connected.  
Insert into HDMI connector  
Insert into HDMI  
HDMI mini connector  
connector  
R When an HDMI cable is connected, pictures and sound are played back on the TV.  
Q When connecting cables, be sure the connectors are fully inserted.  
Tune the television to the video or HDMI input channel. See the documen-  
tation supplied with the television for details.  
3
4
Press the abutton for about a second to turn the camera on. The camera  
monitor turns off and pictures and movies are played back on the TV. Note  
that the camera volume controls have no effect on sounds played on the  
TV; use the television volume controls to adjust the volume.  
Connections  
77  
Printing Pictures via USB  
If the printer supports PictBridge, the camera can be connected  
directly to the printer as shown below and pictures can be printed  
without first being copied to a computer. Note that depending on  
the printer, not all the functions described below may be supported.  
Connect the supplied USB cable as shown and turn the printer on.  
1
Turn the camera on.  
2
Press the selector left or right to display a picture you wish to print.  
3
Press the selector up or down to choose the number of copies (up to 99).  
4
Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a  
confirmation dialog when settings are complete.  
5
78  
Connections  
Printing Pictures via USB  
Press MENU/OK to start printing. Printing can be interrupted by pressing  
DISP/BACK, but note that some printers may not respond immediately. If the  
printer stops before printing is complete, turn the camera off and then on  
again.  
6
7
After confirming that PRINTING has cleared from the camera display, turn  
the camera off and disconnect the USB csable.  
R Pictures can be printed from internal memory or a memory card that has been  
formatted in the camera.  
R If no pictures are selected, the camera will print one copy of the current picture.  
R Page size, print quality, and border selections are made using the printer.  
Printinng thee DDaattee ooff RReecoorrding  
To print the date of recording on pictures, press DISP/BACK in the PictBridge display  
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without  
the date of recording, select PRINT WITHOUT DATE). Some printers do not support  
date printing. See the printer manual for details.  
Connections  
79  
Printing Pictures via USB  
Printing the DPOF Print Order  
The KPRINT ORDER (DPOF) option in the playback menu can be used to  
create a digitalprint orderfor PictBridge-compatible printers (P120) or de-  
vices that support DPOF.  
DPOF  
DPOF (Digital Print Order Format) is a standard that allows pictures to be  
printed fromprint ordersstored in internal memory or on a memory card.  
The information in the order includes the pictures to be printed and the  
number of copies of each picture.  
Select playback mode and press MENU/OK to display the playback menu.  
1
2
3
Highlight KPRINT ORDER (DPOF) and press MENU/OK.  
Highlight one of the following options and press MENU/OK:  
WITH DATE s: Print the date of recording on pictures.  
WITHOUT DATE: Do not print the date of recording on pictures.  
R Some printers do not support date printing. See the printer manual for details.  
Press the selector left or right to display a picture you wish to add to or  
remove from the print order.  
4
80  
Connections  
Printing Pictures via USB  
Press the selector up or down to choose the number of copies (up to 99).  
To remove a picture from the print order, press the selector down until the  
number of copies is zero.  
5
Repeat Steps 4–5 to complete the print order and press MENU/OK when  
settings are complete.  
6
7
A confirmation dialog will be displayed. Press MENU/OK to save the print  
order.  
R Remove the memory card to create or modify a print order for the pictures in  
internal memory.  
R Print orders can contain a maximum of 999 pictures.  
R If a memory card is inserted containing a print order created by another camera,  
a message will be displayed. Create a new print order as described above.  
Connections  
81  
Viewingg Picturreess oonn aa CCoommppuutter  
The supplied software can be used to copy pictures to a computer, where  
they can be stored, viewed, organized, and printed. Before proceeding, install  
the software as described below. Do NOT connect the camera to the computer  
until installation is complete.  
Windows: Installing MyFinePix Studio  
Confirm that the computer meets the following system requirements:  
1
Windowws 7 (SP 1)/Windowss VViisstta (SP 2) 1  
Windowws XP (SP 3) 1  
3GHz Pentium 4 or better  
2GHz Pentium 4 or better  
CPU  
(2.4GHz Core 2 Duo or better)2  
(2.4GHz Core 2 Duo or better)2  
512MB or more  
(1GB or more)2  
RAM  
Free disk space  
GPU  
1GB or more  
2GB or more  
Supports DirectX 9 or later  
Supports DirectX 7 or later  
(requiired;; pperforrmance not guaranteeed withh otheerr GPUss)  
(recommended)  
Video  
1,024×768 pixels or more with 24-bit color or better  
• Built-in USB port recommended. Operation is not guaranteed with other  
USB ports.  
• .NET Framework 3.5 Service Pack 1 required when uploading images or us-  
ing Map Viewer.  
Other  
• Internet connection (broadband recommended) required to install  
.NET Framework (if necessary), to use auto update feature, and when per-  
forming such tasks as sharing pictures on-line or via e-mail.  
1 Other versions of Windows are not supported. Only pre-installed operating systems are  
supported; operation is not guaranteed on home-built computers or computers that have  
been upgraded from earlier versions of Windows.  
2 Recommended when displaying HD movies.  
82  
Connections  
Viewing Pictures on a Computer  
Start the computer. Log in to an account with administrator privileges be-  
fore proceeding.  
2
3
Exit any applications that may be running and insert the installer CD in a  
CD-ROM drive.  
Windoows 7/Wiindows Vista  
If an AutoPlay dialog is displayed, click SETUP.EXE. AUser Account Controldia-  
log will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).  
The installer will start automatically; click Install MyFinePix Studio and  
follow the on-screen instructions to install MyFinePix Studio and RAW FILE  
CONVERTER (F770EXR only).  
If the Installer Does Noott SSttaarrtt AAuuttoommaattiiccaalllly  
If the installer does not start automatically, select Computer or My Computer  
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX  
CD window and double-click setup or SETUP.EXE.  
Connections  
83  
Viewing Pictures on a Computer  
If prompted to install Windows Media Player or DirectX, follow the on-  
screen instructions to complete installation.  
4
Remove the installer CD from the CD-ROM drive when installation is com-  
plete. Store the installer CD in a dry location out of direct sunlight in case  
you need to re-install the software.  
5
Installation is now complete. Proceed toConnecting the Camera(P87).  
84  
Connections  
Viewing Pictures on a Computer  
Macintosh: Installing FinePixViewer  
Confirm that the computer meets the following system requirements:  
1
CPU  
PowerPC or Intel (Core 2 Duo or better)*  
Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.  
com/support/digital_cameras/compatibility/ for more information). Mac OS X  
version 10.7 and later not supported.  
OS  
RAM  
Free disk space  
Video  
256MB or more (1GB or more)*  
A minimum of 200MB required for installation with 400MB available when  
FinePixViewer is running  
800×600 pixels or more with thousands of colors or better  
Built-in USB port recommended. Operation is not guaranteed with other USB  
ports.  
Other  
* Recommended when displaying HD movies.  
After starting the computer and quitting any applications that may be run-  
ning, insert the installer CD in a CD-ROM drive and double-click Installer  
for Mac OS X.  
2
3
R To install RAW FILE CONVERTER, double-click SILKYRFCEXInstaller. RAW FILE  
CONVERTER is used to view RAW images on your computer (F770EXR only).  
An installer dialog will be displayed; click Installing FinePixViewer to start  
installation. Enter an administrator name and password when prompted  
and click OK, then follow the on-screen instructions to install FinePixViewer.  
Click Exit to quit the installer when installation is complete.  
Connections  
85  
Viewing Pictures on a Computer  
Remove the installer CD from the CD-ROM drive. Note that you may be  
4
unable to remove the CD if Safari is running; if necessary, quit Safari before  
removing the CD. Store the installer CD in a dry location out of direct sun-  
light in case you need to re-install the software.  
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,  
and select Preferences… from the Image Capture application menu. The  
Image Capture preferences dialog will be displayed; choose Other… in  
the When a camera is connected, open menu, then select FPVBridge  
in theApplications/FinePixViewer”folder and click Open. Quit Image Cap-  
ture.  
5
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”  
folder and start Image Capture. The camera will be listed under DEVICES;  
select the camera and choose FPVBridge from the Connecting this cam-  
era opens menu and click Choose. Quit Image Capture.  
Installation is now complete. Proceed toConnecting the Camera(P87).  
86  
Connections  
Viewing Pictures on a Computer  
Connecting the Camera  
If the pictures you wish to copy are stored on a memory card, insert the  
card into the camera.  
1
R Windows users may require the Windows CD when starting the software for  
the first time.  
Q Loss of power during transfer could result in loss of data or damage to internal  
memory or the memory card. Charge the battery before connecting the camera.  
Turn the camera off and connect the supplied USB cable as shown, mak-  
ing sure the connectors are fully inserted. Connect the camera directly to  
the computer; do not use a USB hub or keyboard.  
2
Press the abutton for about a second to turn the camera on and follow  
the on-screen instructions to copy pictures to the computer. To exit with-  
out copying pictures, click Cancel.  
3
Connections  
87  
Viewing Pictures on a Computer  
For more information on using the supplied software, start the application  
and select the appropriate option from the Help menu.  
Q If a memory card containing a large number of images is inserted, there may be a  
delay before the software starts and you may be unable to import or save images.  
Use a memory card reader to transfer pictures.  
Q Make sure that the computer does not display a message stating that copying is in  
progress and that the indicator lamp is out before turning the camera off or discon-  
necting the USB cable (if the number of images copied is very large, the indicator  
lamp may remain lit after the message has cleared from the computer display).  
Failure to observe this precaution could result in loss of data or damage to internal  
memory or the memory card.  
Q Disconnect the camera before inserting or removing memory cards.  
Q In some cases, it may not be possible to access pictures saved to a network server  
using the supplied software in the same way as on a standalone computer.  
Q The user bears all applicable fees charged by the phone company or Internet ser-  
vice provider when using services that require an Internet connection.  
88  
Connections  
Viewing Pictures on a Computer  
Disconnecting thhee CCamera  
After confirming that the indicator lamp is out, turn the camera off and disconnect  
the USB cable.  
Uninstalling the Supplied Softtwwaarree  
Only uninstall the supplied software when it is no longer required or before begin-  
ning reinstallation. After quitting the software and disconnecting the camera, drag  
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash  
in the Finder menu (Macintosh), or open the control panel and use “Programs and  
Features(Windows 7/Windows Vista) orAdd or Remove Programs(Windows XP) to  
uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may  
be displayed; read the contents carefully before clicking OK.  
Connections  
89  
Menus  
Using the MMenus: Shhoooottiinngg MMode  
Use the F-mode and shooting menus to adjust shooting settings. The op-  
tions available vary with the shooting mode selected.  
Using the F-Mode Menu  
To display F-mode menu shooting options, press the  
Fbutton in shooting mode. Highlight items and press  
the selector right to view options, then highlight an op-  
tion and press MENU/OK. Press DISP/BACK to exit when set-  
tings are complete.  
F-Mode Menu Options  
NISO  
(defaults to AUTO)  
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-  
tling may appear in pictures taken at high sensitivities.  
100  
Bright  
ISO  
Scene  
12800  
Dark  
Less noticeable  
Nooiissee ((mmottling)  
More noticeable  
Option  
Description  
Sensitivity is adjusted automatically in response to shooting conditions.  
AUTO (3200) / AUTO (1600) / As above, except that sensitivity will not be raised above the value in  
AUTO  
AUTO (800) / AUTO (400)  
parentheses.  
12800 / 64000 / 3200 / 1600 /  
800 / 400 / 2200 / 100  
Sensitivity is set to the specified value, which is shown in the display.  
90  
Using the Menus: Shooting Mode  
OIMAGE SIZE  
(defaults to O4:3)  
Choose the image size and aspect ratio at which pictures are record-  
ed. Large pictures can be printed at large sizes with no drop in quality,  
while small pictures require less memory, allowing more pictures to be  
recorded.  
O4 : 3  
Size Aspect ratio  
Size Versus Aspect Ratio  
Size  
Option  
O
Prints at sizes up to  
34×25cm (13.5×10in.)  
P
24×18cm (9.5×7in.)  
17×13cm (7×5in.)  
Q
Aspect ratio  
4 : 3: Pictures have the same 3 : 2: Pictures have the same 16 : 9: Suited for display on  
proportions as the camera  
display.  
proportions as a frame of  
35mm film.  
High Definition (HD) devices.  
3
2
9
4
3
16  
Menus  
91  
Using the Menus: Shooting Mode  
RCONTINUOUS  
(defaults to OFF)  
Caappttuurreemotioninaseriesoofpicturres(P46)).. ChooseffromO, X, Y, I, P, andOFF (FF770EXR)  
or O, X, Y, L, I, and OFF (F750EXR).  
RLAANNDDMARRK NAVIGGAATOR (F770EXR Only)  
View landmark information (P71).  
RSET-UP (F770EXR Only)  
Access the following GPS options (P65).  
Option  
Description  
Immediately update GPS data.  
R GPS data are not updated if OFF for LOCATION SEARCH.  
POWER SEARCH ON  
Add custom landmarks, names, or photos to the map database, or edit or  
delete custom landmarks.  
MY LANDMARK REGISTER  
LOCATION SEARCH  
LOCATION INFO  
Turn the GPS receiver on or off.  
Display GPS data.  
AUTO TIME CORRECTION Use GPS data to set the camera clock.  
TRACKING DATA  
kmm//mile  
Record GPS data.  
Choose the units used to display GPS information.  
Choose ON to embed GPS data in photos (GPS data will not be embed-  
ded in movies, panoramas, or 3D photos). Note that GPS data can not be  
deleted; select OFF before shooting if you do not wish to record GPS data  
with your pictures.  
PLACE NAME STAMP  
92  
Menus  
Using the Menus: Shooting Mode  
ZADVANCED ANTI BLUR  
(defaults to ON)  
Select ON to enable advanced anti blur in Rmode (P24).  
PFILM SIMULATION  
(defaults to c)  
Simulate the effects of different types of film, including sepia and black-and-white.  
Option  
Description  
Standard color reproduction. Suited to a wide range of subjects, from  
portraits to landscapes.  
cPROVIA/STANDARD  
dVelviaa/VIVID  
eASTIA/SOFT  
bB&W  
A high-contrast palette of saturated colors, suited to nature photographs.  
A soft-toned palette of less saturated colors.  
Take pictures in black and white.  
fSEPIA  
Take pictures in sepia.  
Menus  
93  
Using the Menus: Shooting Mode  
Using the Shooting Menu  
To display the shooting menu, press MENU/OK in shooting  
mode. Highlight items and press the selector right to  
view options, then highlight an option and press MENU/  
OK. Press DISP/BACK to exit when settings are complete.  
Shooting Menu Options  
AEMODE  
(defaults to R)  
(defaults to r)  
(defaults to h)  
Choose an option for Emode (P23).  
AAdv. MODE  
Choose an advanced shooting mode (P25).  
ASCENE POSITION  
Choose a scene for SP mode (P33).  
NISO  
(defaults to AUTO)  
(defaults to O4:3)  
(defaults to F)  
Control the camera’s sensitivity to light (P90).  
OIMAGE SIZE  
Choose image size and aspect ratio (P91).  
TIMAGE QUALITY  
Choose how much image files are compressed.  
Option  
Description  
FINE  
NORMAL  
Low compression. Select for higher image quality.  
High compression. Select this option to store more pictures.  
94  
Menus  
Using the Menus: Shooting Mode  
UDYNAMIC RANGE  
(defaults to AUTO)  
Control contrast. Higher values are recommended for scenes that include both sunlight and  
deep shade or for increased contrast with such subjects as sunlight on water, brightly-lit autumn  
leaves, portraits taken against a blue sky, and white objects or people wearing white; note, how-  
ever, that mottling may appear in pictures taken at higher values. If AUTO is selected, the camera  
will automatically select values between 100% and 400% in response to shooting conditions.  
Option  
Description  
V100% Increase contrast when shooting indoors or under overcast skies.  
AUTO  
W200%  
X400%  
Y800%  
Z1600%  
Reduce loss of detail in highlights and shadows when photographing  
high-contrast scenes.  
R Z1600% and Y800% are available only when D-RANGE PRIORITY is selected in E  
mode and an option other than dVelvia/VIVID or eASTIA/SOFT is selected for PFILM  
SIMULATION.  
PFILM SIMULATION  
(defaults to c)  
Simulate the effects of different types of film (P93).  
Menus  
95  
Using the Menus: Shooting Mode  
DWHITE BAALLANCE  
(defaults to AUTO)  
If AUTO does not produce natural colors (for example, when taking close-ups), select hand  
measure a value for white balance or choose the option that matches the light source.  
Option  
AUTO  
h
Description  
White balance adjusted automatically.  
Measure a value for white balance.  
For subjects in direct sunlight.  
i
j
For subjects in the shade.  
k
Use underdaylightuorescent lights.  
Use underwarm whiteuorescent lights.  
Use undercool whiteuorescent lights.  
Use under incandescent lighting.  
For underwater photography  
l
m
n
g
h: Custom White Balance  
Choose hto adjust white balance for unusual lighting conditions. White balance measure-  
ment options will be displayed; frame a white object so that it fills the display and press the  
shutter button all the way down to measure white balance.  
If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.  
If “UNDER” is displayed, raise exposure compensation (P39) and try again.  
If “OVER” is displayed, lower exposure compensation and try again.  
R For greater precision, adjust PFILM SIMULATION, NISO, and UDYNAMIC RANGE  
before measuring white balance.  
R At settings other than h, auto white balance is used with the flash.  
R Results vary with shooting conditions. Play pictures back after shooting to check colors in  
the display.  
96  
Menus  
Using the Menus: Shooting Mode  
yINTELLIGENT SHARPNESS  
(defaults to OFF)  
Select ON to process photos digitally for sharp, super high-resolution results.  
R The time needed to record images increases.  
R The effects are not visible in the display during shooting.  
R Intelligent sharpness may turn off automatically in some modes.  
R This option has no effect on photos taken in continuous mode.  
RCONTINUOUS  
(defaults to OFF)  
Caappttuurreemotioninaseriesofpictuures(P466). ChooosefrommO, X, Y, I, P, anndOFF (F770EXR)  
or O, X, Y, L, I, and OFF (F750EXR).  
RMY LAANDMMARK REGIISTER (F770EXR Only)  
Add custom landmarks, names, or photos to the map database, or edit or delete custom land-  
marks (P71).  
ZADVANCED ANTI BLUR  
(defaults to ON)  
Select ON to enable advanced anti blur in Rmode (P24).  
bFACE DETECTION  
Choose whether the camera automatically detects and sets focus and exposure for human por-  
trait subjects (P45).  
Menus  
97  
Using the Menus: Shooting Mode  
CPHOTOMETRY  
(defaults to o)  
Choose how the camera meters exposure when Intelligent Face Detection is off.  
Option  
oMULTI  
Description  
Automatic scene recognition is used to adjust exposure for a wide range of  
shooting conditions.  
The camera meters lighting conditions at the center of the frame. Recom-  
mended when the background is much brighter or darker than the main  
subject.  
pSPOT  
Exposure is set to the average for the entire frame. Provides consistent expo-  
sure across multiple shots with the same lighting, and is particularly effective  
for landscapes and portraits of subjects dressed in black or white.  
qAVERAGE  
98  
Menus  
Using the Menus: Shooting Mode  
FAF MODE  
This option controls how the camera selects the focus area for photographs. Regardless of the  
option selected, the camera will focus on the subject in the center of the frame when macro  
mode is on.  
Option  
rCENTER  
Description  
The camera focuses on the subject in the center of the frame.  
When the shutter button is pressed halfway, the camera detects high-contrast  
subjects near the center of the frame and selects the focus area automatically.  
sMULTI  
The camera continuously adjusts focus to reflect changes in the distance to  
the subject in the focus frame.  
Position the subject in the center focus area and press the selector left. Focus  
will track the subject as it moves through the frame.  
uCONTINUOUS  
xTRACKING  
R Note that in uand xmodes, the camera focuses continuously, increasing the drain on the  
battery, and that the sound of the camera focusing may be audible.  
R If a face is detected when u is selected, a o icon will be displayed and the camera will  
continuously adjust focus to maintain focus on the face.  
nFACE RECOGNITION  
Add portrait subjects to the face recognition database. These subjects will be given priority  
during Intelligent Face Detection, and their names and other information can be viewed during  
playback (P54).  
Menus  
99  
Using the Menus: Shooting Mode  
FMOVIE AF MODE  
(defaults to r)  
This option controls how the camera selects the focus area for movies.  
Option  
rCENTER  
Description  
The camera focuses on the subject in the center of the frame.  
The camera continuously adjusts focus to reflect changes in the distance to  
subjects near the center of the frame.  
uCONTINUOUS  
R Note that in umode, the camera focuses continuously, increasing the drain on the battery,  
and that the sound of the camera focusing may be audible.  
WMOVIE MODE  
(defaults to i)  
Choose a frame size for movies (P73).  
aSTILLL SHOOOTTING INN MOVIE  
(defaults to MOVIE PRIORITY)  
Choose how the camera records photographs taken during movie recording(P74).  
Option  
Description  
The camera takes a photograph without interrupting movie recording.  
Image size is determined by the option selected for WMOVIE MODE.  
MOVIE PRIORITY  
The camera interrupts filming to take the photograph and resumes film-  
ing automatically when recording is complete. Image size is determined  
by the option selected for OIMAGE SIZE, but note that the photograph  
will be recorded at size Pif Ois selected.  
STILL IMAGE PRIORITY  
JAE BKT EV STEPS  
(defaults to 1/3)  
Choose the size of the exposure bracketing increment used when OAE BKT is selected for  
/
/
RCONTINUOUS. Select from increments of +1 3EV, +2 3EV, and +1EV (note that the camera  
may not be able to use the selected bracketing increment if the amount of over- or under- expo-  
sure exceeds the limits of the exposure metering system).  
100  
Menus  
Using the MMenus: Playbbaacckk MMode  
The F-mode and playback menus are used to manage the pictures in inter-  
nal memory or on the memory card.  
Using the F-Mode Menu  
To display F-mode menu playback options, press the  
Fbutton in playback mode. Highlight items and press  
the selector right to view options, then highlight an op-  
tion and press MENU/OK. Press DISP/BACK to exit when set-  
tings are complete.  
F-Mode Menu Options  
mPHOTOBOOK ASSIST  
Create books from your favorite photos (P60).  
RLAANNDDMARRK NAVIGGAATOR (F770EXR Only)  
View landmark information (P71).  
RPHOTO NAVIGATION (F770EXR Only)  
View the direction and distance from your present position to the location where a picture was  
taken (P69).  
Menus  
101  
Using the Menus: Playback Mode  
RSET-UP (F770EXR Only)  
Access tthe folllowing GPS options (P65).  
Option  
Description  
Immediately update GPS data.  
POWER SEARCH ON  
R GPS data are not updated if OFF for LOCATION SEARCH.  
Copy GPS data from one picture to another.  
Turn the GPS receiver on or off.  
LOCATION INFOO CCOOPPY  
LOCATION SEARCH  
LOCATION INFO  
Display GPS data.  
AUTO TIME CORRECTION Use GPS data to set the camera clock.  
TRACKING DATA  
kmm//mile  
Record GPS data.  
Choose the units used to display GPS information.  
Choose ON to embed GPS data in photos (GPS data will not be embed-  
ded in movies, panoramas, or 3D photos). Note that GPS data can not be  
deleted; select OFF before shooting if you do not wish to record GPS data  
with your pictures.  
PLACE NAME STAMP  
ISLIDEE SHOW  
(defaults to MULTIPLE)  
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.  
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at  
any time by pressing MENU/OK.  
Option  
Description  
NORMAL  
FADE-IN  
Press selector left or right to go back or skip ahead one frame. Select  
FADE-IN for fade transitions between frames.  
NORMAL g  
FADE-IN g  
MULTIPLE  
As above, except that camera automatically zooms in on faces selected  
with Intelligent Face detection.  
Display several pictures at once.  
R The camera will not turn off automatically while a slide show is in progress.  
102  
Menus  
Using the Menus: Playback Mode  
Using the Playback Menu  
To display the playback menu, press MENU/OK in playback  
mode. Highlight items and press the selector right to  
view options, then highlight an option and press MENU/  
OK. Press DISP/BACK to exit when settings are complete.  
Playback Menu Options  
mPHOTOBOOK ASSIST  
Create books from your favorite photos (P60).  
RLAANNDDMARRK NAVIGGAATOR (F770EXR Only)  
View landmark information (P71).  
RLOCATION INFO COPY (F770EXR Only)  
Copy GPS data from one picture to another (P70).  
RPHOTO NAVIGATION (F770EXR Only)  
View the direction and distance from your present position to the location where a picture was  
taken (P69).  
bIMAGE SEARCH  
Search for pictures (P59).  
AERASE  
Delete all or selected pictures (P58).  
Menus  
103  
Using the Menus: Playback Mode  
jMARK FOR UPLOAD TO  
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).  
Selecting Pictures for Upload  
Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and  
movies for upload to Facebook.  
1
Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press  
DISP/BACK to exit when all the desired pictures are selected.  
2
R Only movies can be selected for upload to YouTube.  
R During playback, selected pictures are indicated by jYouTube or jFACEBOOK icons.  
RESET ALL: Deselecting All Pictures  
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a  
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the  
operation is complete.  
Uploading Pictures (Windows Only)  
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix  
Studio.  
Select with camera  
Upload from computer  
For information on installing MyFinePix Studio and connecting the camera to a computer, see  
“Viewing Pictures on a Computer(P82).  
104  
Menus  
Using the Menus: Playback Mode  
ISLIDEE SHOW  
(defaults to MULTIPLE)  
View pictures in an automated slide show (P102).  
BRED EYEE REMOVAL  
If the current picture is marked with a gicon to indicate that it was taken with Intelligent Face  
Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-  
eye is detected, the image will be processed to create a copy with reduced red-eye.  
Display the desired picture.  
1
Select BRED EYE REMOVAL in the playback menu.  
2
3
Press MENU/OK.  
R Red eye may not be removed if the camera is unable to detect a face or the face is in profile.  
Results may differ depending on the scene. Red eye can not be removed from pictures that  
have already been processed using red-eye removal or pictures created with other devices.  
R The amount of time needed to process the image varies with the number of faces detected.  
R Copies created with BRED EYE REMOVAL are indicated by a eicon during playback.  
DPROTECT  
Protect pictures from accidental deletion.  
Select DPROTECT in the playback menu.  
1
2
Highlight one of the following options and press MENU/OK:  
FRAME: Protect selected pictures. Press the selector left or right to view pictures and press  
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.  
SET ALL: Protect all pictures.  
RESET ALL: Remove protection from all pictures.  
Q Protected pictures will be deleted when the memory card or internal memory is formatted  
(P112).  
Menus  
105  
Using the Menus: Playback Mode  
GCROP  
Create a cropped copy of the current picture.  
Display the desired picture.  
1
Select GCROP in the playback menu.  
2
3
Use the zoom control to zoom in and out and use the selector to scroll the picture until the  
desired portion is displayed.  
Press MENU/OK to display a confirmation dialog.  
4
5
Press MENU/OK again to save the cropped copy to a separate file.  
R Larger crops produce larger copies; all copies have an aspect ratio of 4:3. If the size of the final  
copy will be a, OK will be displayed in yellow.  
ORESIZE  
Create a small copy of the current picture.  
Display the desired picture.  
1
Select ORESIZE in the playback menu.  
2
3
4
Highlight a size and press MENU/OK to display a confirmation dialog.  
Press MENU/OK to save the resized copy to a separate file.  
R The sizes available vary with the size of the original image.  
106  
Menus  
Using the Menus: Playback Mode  
CIMAGE ROTATE  
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD  
monitor.  
Display the desired picture.  
1
Select CIMAGE ROTATE in the playback menu.  
2
3
Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclock-  
wise.  
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it  
is played back on the camera.  
4
R Protected pictures can not be rotated. Remove protection before rotating pictures (P105).  
R The camera may not be able to rotate pictures created with other devices.  
ECOPY  
Copy pictures from internal memory to a memory card.  
Select ECOPY in the playback menu.  
1
2
Highlight one of the following options and press the selector right:  
aINTERNAL MEMORY y bCARD: Copy pictures from internal memory to a memory card.  
bCARD y aINTERNAL MEMORY: Copy pictures from a memory card to internal memory.  
Highlight one of the following options and press MENU/OK:  
FRAME: Copy selected pictures. Press the selector left or right to view pictures and press  
MENU/OK to copy the current picture.  
3
ALL FRAMES: Copy all pictures.  
R Copying ends when the destination is full.  
R DPOF print information is not copied (P80).  
Menus  
107  
Using the Menus: Playback Mode  
FVOOIICCE MEMO  
Add a voice memo to the current photograph. Holding the camera at a distance of about 20 cm,  
face the microphone and press MENU/OK to begin recording. Press MENU/OK again to end record-  
ing (recording ends automatically after 30 seconds).  
R Voice memos can not be added to movies or protected pictures. Remove protection from  
pictures before recording voice memos.  
R If a voice memo already exists for the current picture, the options will be displayed. Select  
RE-REC to replace the existing memo.  
Playiing Vooice Memos  
Pictures with voice memos are indicated by a q icon during playback. To play the voice  
memo back, select PLAY for FVOICE MEMO in the playback menu.  
R The camera may not play voice memos recorded with other devices.  
R Do not cover the speaker during playback.  
iERASE FACE RECOG.  
Remove face recognition links from the current image. When this option is selected, the cam-  
era will zoom in on an area in the current picture that it has matched with a face in the face  
recognition database. If the match is not correct, press MENU/OK to remove the link to the face  
recognition database.  
R Face recognition links can not be removed from copies with a size of aor smaller.  
KPRINT ORDER (DPOF)  
Select pictures for printing on DPOF- and PictBridge-compatible devices (P80).  
108  
Menus  
Using the Menus: Playback Mode  
JDISP ASPECT  
Choose how High Definition (HD) devices display pictures with an aspect ratio of 4:3 (this option  
is available only when an HDMI cable is connected). Select 16 : 9 to display the image so that it  
fills the screen with its top and bottom cropped out, 4 : 3 to display the entire image with black  
bands at either side.  
16 : 9  
4 : 3  
16 : 9  
4 : 3  
R Photographs with an aspect ratio of 16:9 are displayed full screen, those with an aspect ratio  
of 3:2 in a black frame.  
Menus  
109  
The Setup MMenu  
Using the Setup Menu  
Display the setup menu.  
1.1 Press MENU/OK to display the menu for the current  
1
mode.  
1.2 Press the selector left to highlight the tab for the  
current menu.  
1.3 Press the selector down to highlight X.  
EXIT  
Tab  
1.4 Press the selector right to place the cursor in the setup menu.  
Adjust settings.  
2
Highlight items and press the selector right to view options, then high-  
light an option and press MENU/OK. Press DISP/BACK to exit when settings  
are complete.  
110  
Menus  
The Setup Menu  
Setup Menu Options  
FDATE/TIME  
Set the camera clock (P16).  
NTIME DIFFERENCE  
(defaults to h)  
Switch the camera clock instantly from your home time zone to the local time at your destina-  
tion when traveling. To specify the difference between local time and your home time zone:  
Highlight g LOCAL and press the selector right.  
Use the selector to choose the time difference between local time and your home time zone.  
Press MENU/OK.  
1
2
3
To switch between local time and your home time zone, highlight g LOCAL or h HOME and  
press MENU/OK.  
Option  
h HOME  
Description  
Switch to the time currently selected for FDATE/TIME (see above).  
Switch to local time. If this option is selected, g and the time and date will  
be displayed in yellow for three seconds each time the camera is turned on.  
g LOCAL  
Qa  
Choose a language.  
oSILENT MODE  
(defaults to OFF)  
Select ON to disable the speaker, flash, and AF-assist illuminator in situations in which camera  
sounds or lights may be unwelcome (note that the flash will still fire in Cmode).  
Menus  
111  
The Setup Menu  
RRESET  
Reset all settings except FDATE/TIME, NTIME DIFFERENCE, OBACKGROUND COLOR,  
and QVIDEO SYSTEM to default values.  
Highlight RRESET and press the selector right to display a confirmation dialog.  
1
2
Highlight OK and press MENU/OK.  
KFORMAT  
If a memory card is inserted in the camera, this option will format the memory card. If no mem-  
ory card is inserted, this option will format internal memory.  
Q All data—including protected pictures—will be deleted from the memory card or internal  
memory. Be sure important files have been copied to a computer or other storage device.  
Q Do not open the battery-chamber cover during formatting.  
RSET-UP (F770EXR Only)  
Access tthe folllowing GPS options (P65).  
Option  
Description  
Immediately update GPS data.  
R GPS data are not updated if OFF for LOCATION SEARCH.  
POWER SEARCH ON  
LOCATION SEARCH  
LOCATION INFO  
Turn the GPS receiver on or off.  
Display GPS data.  
AUTO TIME CORRECTION Use GPS data to set the camera clock.  
TRACKING DATA  
kmm//mile  
Record GPS data.  
Choose the units used to display GPS information.  
Choose ON to embed GPS data in photos (GPS data will not be embed-  
ded in movies, panoramas, or 3D photos). Note that GPS data can not be  
deleted; select OFF before shooting if you do not wish to record GPS data  
with your pictures.  
PLACE NAME STAMP  
112  
Menus  
The Setup Menu  
AIMAGE DISP.  
(defaults to 1.5 SEC)  
Choose how long pictures are displayed in the LCD monitor after shooting.  
Option  
Description  
3 SEC  
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).  
Colors may differ slightly from those in the final image.  
1.5 SEC  
ZOOOOMM ((CCOONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.  
OFF  
Pictures are not displayed after shooting.  
BFRAME NO.  
(defaults to CONT.)  
New pictures are stored in image files named using a four-digit file num-  
ber assigned by adding one to the last file number used. The file num-  
ber is displayed during playback as shown at right. BFRAME NO. con-  
trols whether file numbering is reset to 0001 when a new memory card Directory  
is inserted or the current memory card or internal memory is formatted. number  
Frame number  
100-0001  
File  
number  
Option  
Description  
Numbering continues from the last file number used or the first available file  
number, whichever is higher. Choose this option to reduce the number of  
pictures with duplicate file names.  
CONTINUOUS  
Numbering is reset to 0001 after formatting or when a new memory card is  
inserted.  
RENEW  
R If the frame number reaches 999-9999, the shutter release will be disabled (P133).  
R Selecting RRESET (P112) sets BFRAME NO. to CONTINUOUS but does not reset the file  
number.  
R Frame numbers for pictures taken with other cameras may differ.  
Menus  
113  
The Setup Menu  
GOPERATTIONN VVOL.  
(defaults to c)  
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF  
(mute) to disable control sounds.  
HSHUTTEER VOLUME  
(defaults to c)  
Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute)  
to disable the shutter sound.  
eSHUTTER SOUND  
Choose the sound made by the shutter.  
(defaults to i)  
(defaults to 7)  
IPLAAYYBBAACCKK VVOLUME  
Adjust the volume for movie and voice memo playback.  
JLCD BRIGHTNESS  
(defaults to 0)  
Control the brightness of the display.  
TMONITOR SUNLIGHT MODE  
(defaults to OFF)  
Select ON to make the display in the monitor easier to read in bright light (P6).  
NAUTO PPOWER OFF  
(defaults to 2 MIN)  
Choose the length of time before the camera turns off automatically when no operations are  
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned  
off manually. Note that in some situations the camera turns off automatically even when OFF  
is selected.  
FFn BUTTON  
(defaults to RLANDMARK NAVIGATOR (F770EXR) / NISO (F750EXR))  
Choose the role played by the Fn button (P44).  
114  
Menus  
The Setup Menu  
LDUAL IS MODE  
(defaults to L)  
Choose from the following image stabilization options:  
Option  
Description  
Image stabilization on. If + MOTION is selected, the camera will ad-  
just shutter speed to reduce motion blur when a moving objects  
are detected.  
L CONTINUOUS + MOTION  
l CONTINUOUS  
M SHOOTING + MOTION  
m SHOOTING ONLY  
OFF  
As above, except that image stabilization is performed only when  
the shutter button is pressed halfway or the shutter is released.  
Image stabilization off. Choose this option when using a tripod.  
R + MOTION has no effect when sensitivity is set to a fixed value, and may also be unavailable  
at some other combinations of settings. The effect may vary with lighting conditions and the  
speed at which the object is moving.  
BRED EYEE REMOVAL  
(defaults to ON)  
Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face  
Detection.  
R Red-eye reduction is performed only when a face is detected.  
R Red-eye removal is not available with RAW images.  
Menus  
115  
The Setup Menu  
RINTELLIGENT DIGITAL ZOOM  
(defaults to OFF)  
If ON is selected, selecting iat the maximum optical zoom position triggers intelligent digital  
zoom, further magnifying the image while processing it for sharp, high-resolution results.  
Thhe Zoooomm IInnddicattoor  
j
j
i
INTELLIGENT DIGITAL  
ZOOM on  
Optical zoom  
Optical zoom  
Intelligent  
digital zoom  
i
INTELLIGENT DIGITAL  
ZOOM off  
R Selecting another mode may end intelligent digital zoom and restore maximum optical  
zoom.  
R In Rmode, the camera will match the Emode to the scene for zoom ratios of up to  
40× when combined with optical zoom.  
R Intelligent digital zoom may sometimes produce lower quality images than optical zoom.  
R The time needed to record images increases.  
R The effects are not visible in the display during shooting.  
R Intelligent digital zoom is not available in continuous mode or during movie recording.  
116  
Menus  
The Setup Menu  
CAF ILLUMINATOR  
(defaults to ON)  
If ON is selected, the AF-assist illuminator will light to assist autofocus.  
Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the cam-  
era is unable to focus in macro mode, try increasing the distance to the subject.  
Q Avoid shining the AF-assist illuminator directly into your subject’s eyes.  
jRAW (F770EXR Only)  
(defaults to OFF)  
Choose RAW+JPEG or RAW to record RAW pictures (note that because RAW data are not pro-  
cessed on the camera, RAW pictures must be copied to a computer for processing). If RAW+JPEG  
is selected, JPEG copies will also be recorded. Choose OFF to record pictures in JPEG format only.  
R To convert RAW files for display on a computer, use the supplied RAW File Converter software.  
Q Crop, resize, and red-eye removal are not available with RAW images. The maximum zoom  
available when viewing RAW images is 3.2×.  
tSAVE ORG IMAGE  
(defaults to OFF)  
Choose ON to save unprocessed copies of seamless z panoramas or pictures taken using  
BRED EYE REMOVAL, jPRO LOW-LIGHT MODE, or iPRO FOCUS MODE.  
mAUTOROTATE PB  
(defaults to ON)  
Choose ON to automatically rotatetall(portrait-orientation) pictures during playback.  
OBACKGROUNND COLOORR  
Choose a color scheme.  
cGUIDANCE DISPPLLAY  
(defaults to ON)  
Choose whether to display tool tips.  
Menus  
117  
The Setup Menu  
QVIDEO SYSTEM  
Choose a video mode for connection to a TV.  
Option  
Description  
Select this mode for connection to video devices in North America, the Carib-  
bean, parts of Latin America, and some East Asian countries.  
Select this mode for connection to video devices in the United Kingdom and  
much of Europe, Australia, New Zealand, and parts of Asia and Africa.  
NTSC  
PAL  
xPOWER MANAGEMENT  
(defaults to n)  
Optimize camera performance for increased battery life or display quality.  
Option  
Description  
Reduces display refresh rate. The display dims to save power if no operations  
n POWER SAVE are performed for a short period, but can be restored by operating camera  
controls. Select this option to save power.  
Choose this option for a brighter, higher quality display and for a longer delay  
before the monitor dims to save power.  
o CLEAR DISPLAY  
R n POWER SAVE does not take effect when Intelligent Face Detection is on.  
118  
Menus  
The Setup Menu  
UDATE SSTAMP  
(defaults to OFF)  
Stamp the time and/or date of recording on photographs as they are taken.  
Option  
R+S  
R
Description  
Stamp new photographs with the date and time of recording.  
Stamp new photographs with the date of recording.  
Do not stamp the time and date on new photographs.  
OFF  
Q Time and date stamps can not be deleted. Turn UDATE STAMP off to prevent time and date  
stamps appearing on new photographs.  
Q If the camera clock is not set, you will be prompted to set the clock to the current date and  
time (P16).  
Q We recommend that you turn the DPOF “print date” option off when printing images with a  
time and date stamp (P80).  
Q Time and date stamps do not appear on movies, panoramas, or 3D photos.  
WSTARTT--UUPP SCREEN  
(defaults to OFF)  
Choose whether the camera displays a splash screen at startup.  
RDEMONSTRATION (F770EXR Only)  
(defaults to OFF)  
Choose ON for a GPS demo. This option should normally be left OFF.  
Menus  
119  
Technical Notes  
Oppttiioonnaall AAcccesssoories  
The camera supports a wide range of accessories from FUJIFILM and other  
manufacturers.  
DIGITAL CAMERA  
Printing  
Digital viewer  
FINEPIX F770EXR  
FINEPIX F750EXR  
Supports 3D display of  
pictures taken using  
INDIVD. SHUTTER 3D.  
USB cable  
(supplied)  
FINEPIX REAL 3D V3 (sold separately)  
PictBridge-compatible  
printer*  
SD/SDHC/SDXC  
memory card  
Audio/Visual  
A/V cable (supplied)  
TV*  
Printer*  
HDMI cable  
(sold separately)  
HDTV*  
Coommpputer Reellatteedd  
USB cable (supplied)  
3D print  
SD card slot or card reader  
Photos taken in INDIVD. SHUTTER 3D.  
http://fujifilm.com/3d/print/  
Computer*  
* Available separately.  
120  
Optional Accessories  
Accessories from FUJIFILM  
The following optional accessories are available from FUJIFILM. For the lat-  
est information on the accessories available in your region, check with your  
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_  
cameras/index.html.  
NP-50: Additional large-capacity NP-50 rechargeable bat-  
teries can be purchased as required. The F750EXR can  
Recharggeeable  
be used with NP-50 batteries only; note that when used  
Li-ion batteries  
with the F770EXR, the NP-50 may record fewer photos  
per charge than the NP-50A.  
BC-45W: Replacement battery chargers can be purchased  
as required. The BC-45W charges an NP-50A/NP-50 bat-  
tery in about 150 minutes at +20°C (+68°F).  
Battery  
chargers  
AC-5VX (requires CP-50 DC coupler): Use for extended playback or  
when copying pictures to a computer (shape of adapter  
and plug vary with region of sale).  
AC power  
adapters  
DC couplers  
CP-50: Connect the AC-5VX to the camera.  
Digital viewer FINEPIX REAL 3D V3: View 3D images without 3D glasses.  
Technical Notes  
121  
Caring for the Camera  
To ensure continued enjoyment of the product, observe the following pre-  
cautions.  
Storage and Use  
If the camera will not be used for an Water and Sand  
extended period, remove the battery Exposure to water and sand can also  
and memory card. Do not store or damage the camera and its internal  
use the camera in locations that are:  
• exposed to rain, steam, or smoke  
• very humid or extremely dusty  
circuitry and mechanisms. When us-  
ing the camera at the beach or sea-  
side, avoid exposing the camera to  
• exposed to direct sunlight or very water or sand. Do not place the cam-  
high temperatures, such as in a era on a wet surface.  
closed vehicle on a sunny day  
Condensation  
• extremely cold  
Sudden increases in temperature,  
• subject to strong vibration  
such as occur when entering a heated  
• exposed to strong magnetic fields,  
building on a cold day, can cause con-  
such as near a broadcasting anten-  
densation inside the camera. If this  
na, power line, radar emitter, motor,  
occurs, turn the camera off and wait  
transformer, or magnet  
an hour before turning it on again. If  
• in contact with volatile chemicals  
condensation forms on the memory  
such as pesticides  
card, remove the card and wait for the  
• next to rubber or vinyl products  
condensation to dissipate.  
122  
Technical Notes  
Caring for the Camera  
Cleaning  
Use a blower to remove dust from the lens and LCD monitor, then gently wipe  
with a soft, dry cloth. Any remaining stains can be removed by wiping gently  
with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-  
cleaning fluid has been applied. Care should be taken to avoid scratching the  
lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.  
Do not use alcohol, thinner, or other volatile chemicals.  
Traveling  
Keep the camera in your carry-on baggage. Checked baggage may suffer  
violent shocks that could damage the camera.  
Technical Notes  
123  
Troubleshooting  
Problems and Solutions  
Power and Battery  
Problem  
Solution  
Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).  
Thhee bbaattery is inserted inccorrectly: Reinsert in the correct orientation (P9).  
Thhee bbaatttteerry-chamber cover is not latched: Latch the battteerryy-chhaambbeerr ccoovveerr ((P9).  
Thhee AAC power adapter and DDC coupleer aarre connnected iincorrectly: Reconnect the AC power  
adapter and DC coupler.  
The cameraa does noot  
turn on.  
Thhee bbattery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert  
it in thhe caammeerraa iimmmmeeddiiaatteellyy bbeeffore ttakking a picture.  
Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.  
oCLEAR DISPPLLAY is selected for xPOWER MANAGEMENT: Select nPOWER  
SAVE to reducee the ddrainn oon the batttery ((P118).  
ON is selectted foor TMONITOR SUNLIGHT MODE: Select OFF to reduce the  
drain on the battery (P6).  
Ris seleected foor shootting moodde: Select Bmode to reduce the drain on the battery (P22).  
uCONTINUOUS or xTRACKING is selected for FAF MODDE: Sellect a ddiiff-  
ferent AF modde (P99).  
The batteery runs down  
quickly.  
Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging  
life. Purchase a new battery.  
PERMANENTLY ON is selected for RLOCATION SEARCH: Select WHEN  
SWITCHED ON or OFF (P65, 92).  
RTRACKING DATA is on: Turn RTRACKING DATA off (P65, 92).  
Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).  
Thhee AACC power adapter or DC coupleer has beeen discconnectteedd: Reconnect the AC power  
adapter and DC coupler.  
The cameraa turns ooff  
suddenly.  
124  
Problems and Solutions  
Problem  
Solution  
Charging does not start. Reinsert the battery in the correct orientation aanndd mmaakkee ssuurree tthhaatt tthhee cchhaarrggeerr iiss pplluuggggeedd iinn ((P7).  
Charging is slow.  
Charge the battery at room temperaturre (Pvi).  
Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.  
Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging  
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.  
Thhee bbaatttteerry is too hot or too cold: Wait for the battery temperature to stabillize (P7).  
The charging lamp lights,  
but the battery does not  
charge.  
Menus and Displays  
Problem  
Solution  
Menus and displays are  
not inn English.  
Select ENGLISH for Qa (P16, 111).  
Shooting  
Problem  
Solution  
Memory is full: Insert a new memory cardd or deeletee ppictures (P10, 58).  
Memory is not formatted: Format the memory caard or iinterrnnal memory (P112).  
Thheeree iiss ddiirrtt oonn tthhee mmemory cardd ccoonnttacts: Clleeaann tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dry cloth.  
Thhee memory cardd iiss ddaamaged: Insert a new memory card (P10).  
Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).  
Thhee ccaamera has turned off aautomatically: Turn the caamera oon (P14).  
Thhee iinnddicator lamp was orange when youu attempptted to recordd aa ppaannoorraammaa: Waiit until  
the indicattor lammpps turnss off (P3).  
Noo ppiiccture is taken when  
the shutter button is  
pressed.  
The LCD monitor goes  
dark aftter shhooting.  
The LCD monitor may darken while the flash charges. Wait for the flash to charge (P41).  
3D imagges doo nnot turrn out  
as expected.  
Use a trripodd oor change thhe disstanccee the caammeerraa iiss mmoovveedd bbeettwweeeenn tthhee rrsstt aanndd sseeccoonndd sshhoottss ((P31)  
Troubleshooting  
125  
Problems and Solutions  
Problem  
Solution  
Thhee ssuubbjjeecct is close to the camera: Select macro mode (P40).  
Thhee ssuubject is far away froomm tthhe camera: Cancel macro mode (P40).  
Thhee ssuubbjjeecct is not suited to autofocus: Use fooccus lock (P37).  
The cameraa does noot  
focus.  
If Sis seleected fforr OIMAGE SIZE inn Rmode, thee caammera wwiill ooptimiize not onnly sensi-  
tivity and other settings, but also image ssiizzee.. To rreeccoorrdd aallll ppiiccttuurreess aatt tthhee ssaammee ssiizzee,, cchhoooossee aannootthheerr  
shootiing moddee or seleect anoother ooptionn ffor OIMAGE SIZE (P91).  
Pictures are not the  
same size.  
Macro mode is not  
available.  
Choose a different shooting mode (P22).  
Thhee ccamera is slow to acqquire GPS data: Some timme may be nneeded too acquiree GPS data  
immediately aaffterr the cameera or RLOCATION SEARCH is turned on or if the cammera has  
been unaable to aacquiree GPS daatta for an exxtendedd periodd (P65, 92).  
GPS  
Looccaation dataa are incorrect: Select OFF for RDEMONSTRATION (P119).  
Landmaark nammees are displayed on ppictures : RPLAACCEE NNAAME SSTAMP is on.  
GPS data can nnoot bbee ddeelleeteed; too aavvoiidd rrecording tthe loocaattiioonn wwiitthh ssuubbsseeqquueenntt ppiiccttuurreess,, ttuurrnn  
RPLAACCEE NNAAMEE STAMP off (P92).  
Intelligent Face Detection Inteelligeent Facce Detteectionn is nott availlablee iinn tthhee ccuurrrrentt shootting mmoode: Choose a differ-  
is not available.  
ent shooting mode (P22).  
Thhee ssuubject’s face is obscureedd bbyy sunglasses, a hat, long haiir, or otthher oobbjjeeccttss: Remove  
the obsttructions.  
Thhee ssuubject’s face occupies onlyy a smalll area of the frame: Change the composition so that  
the subject’s face occupiees a laarrger area off the frame (P37).  
Noo fface is detected.  
Thhee ssuubbjjeeccts head is tilted or horizontal: Ask thee subjectt to holdd ttheir heaad straight.  
Thhee ccaamera is tilted: Keep the camera leevel (P18).  
Thhee ssuubbjjeeccttss ffaaccee iiss ppoooorrlly lit: Shoot in bright light.  
Wrong subject is  
selected.  
The selected subject is closer to the center of the frame than the main subject. Recompose tthhee  
picture or turn face detection off and frame the picture using focuus lockk (P37).  
126  
Troubleshooting  
Problems and Solutions  
Problem  
Solution  
Thhee aasshh iiss nnoott available in the curreenntt sshooting mode: Choose a different shooting mode  
(P22).  
Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).  
Thhee ccaammeerraa is in continuous mode: Select OFF for RCONTINUOUS (P46).  
Thhee ccaammeerraa is in silent mode: Turn silent mode off (P111).  
Thhee aasshh iiss nnot raised: Raise the flash (P41).  
The flash does not fire.  
Thhee ddeessireedd aasshh mmooddee iiss nnoott aavvaaiillaabbllee iinn tthhee ccuurrreenntt sshhoooottiinngg mmooddee: Choose a different  
shooting mode (P22).  
Thhee ccaammeerraa is in silent mode: Turn silent mode off (P111).  
Some flash modes are  
not available.  
Thhee ssuubbjjeecct is not in range of the flash: Position the subject in range of the flash (P139).  
Thhee aasshh wwiinndow is obstructed: Hoolldd tthhee ccamera correctly (P18).  
Fast shutter speed selected: Choose a slower shutter speed (P35, 36).  
The flash does not fully  
light the subject.  
Thhee lleennss iiss ddiirrtty: Clean the lens (P123).  
Thhee lleens is blocked: Keep objects away from the lens (P18).  
sis displayyed duringg shootinngg and the ffoocus framme is displlayed in rred: Check fooccus  
before shooting (P131).  
kis displayed during shooting: Use the flash or a tripod (P42).  
A slow shuutter speeed is sseelleecctteedd aatt hhiigghh tteemmppeerraattuurress: This is normal and does not indi-  
cated a maalfunction.  
Pictures are blurred.  
Pictures are mottled.  
Thhee ccaammeerraa hhaass bbeeeenn uusseedd ccoonnttiinnuuoouuslyy at high temperattureess oorr aa tteemmppeerraattuurree wwaarrnn--  
ing is displayed: Turn the camerra off annd waitt for itt to cooll down.  
Power waas interrrupted during shooting. Beffore connecting the AC power adapter or DC coupler,  
Pictures are not recorded. turn the camera off. Leaving the camera on caann rreessuulltt iinn ccoorrupted files or damage to the memmoorryy  
card oor intteernal memory.  
Troubleshooting  
127  
Problems and Solutions  
Problem  
Solution  
uCONTINUOUS is selected for FMOVIE AF MODE: Select a different AF mode  
(P100).  
Zoooomm wwaass aaddjjusted during shootiing: Do not adjust zoom during shooting.  
Intelligent Face Detection is on: Turn Intelligent Face Detection off (P45).  
Sounds made by the  
camerra aree rrecorded with  
movies.  
Playback  
Problem  
Solution  
Pictures are grainy.  
The pictures were taken with a differentt mmaakkee oorr mmooddeell ooff ccamera.  
Playback volume is too low: Adjust playback volume (P114).  
Thhee microopphhoonnee wwaass oobstructed: Hoolldd tthhee ccamera correctly during recording (P18, 41).  
Thhee ssppeaker is obstructed: Hoolldd tthhee ccamera correctly during playback (P75).  
Noo ssoouund in movie  
playback.  
Selected pictures are not Some of the pictures selected foorr ddeelleettiioonn aarree pprrootteecctteedd.. RReemmoovvee pprrootteeccttiioonn uussiinngg tthhee ddeevviiccee wwiitthh  
deleted.  
which it was originally applied (P105).  
File numbering is  
The batteery-chamber cover was opened whiile the caammeerraa wwaass oonn.. TTuurrnn tthhee ccaammeerraa oobbeeffoorree  
unexpectedly reset.  
opening thhe baatttteerryy-chamberr ccoovveerr ((P14).  
Connections/Miscellaneous  
Problem  
Solution  
Thhee ccaamera is not prooppeerrlly connectedd: Connect the cameraa properrly (P76).  
An A/V cabble was connected during movie playback: Coonnect thhe caammeerraa oonnccee mmoovviiee ppllaayy--  
back has ended.  
Noo ppiiccture or sound.  
Noo coolor  
Input on the television is set to “TV”: Set input to “VIDEO.  
Thhee camera is not sett to tthhee ccoorrrrect viiddeeoo ssttaannddaarrd: Match the camerra QVIDEO SYS-  
TEM setting to the TV (P118).  
Thhee vvoolume on the TV is too low: Adjust the volume.  
Match the cammera QVIDEO SYSTEM setting to the TV (P118).  
128  
Troubleshooting  
Problems and Solutions  
Problem  
Solution  
The computer does not  
recognize the camera.  
Be sure the cameraa and coomputter aree correctly connected (P87).  
Can not trransfer RAW or  
JPEG files to computer.  
Use the bundled softtwwaarree ttoo ttrraannssffer piccturees (P82).  
Pictures caan not bbe  
printed.  
Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera ccorrecttly (P78).  
Thhee pprrinter is off: Turn the printer on.  
Only one copy is printed/  
the date is not printed.  
The printer is not PictBriidge commpatible.  
Temporary ccameraa mmalfuncction: Remove and reinsert the battery (P9) or disconnect and  
reconnect the AC power adapter/DC coupler.  
Thhee bbaatttery is exhausted: Charge the battery (P7) or iinsert a ffully-charged spare bbattery  
(P9).  
The cameraa is unree-  
sponsive.  
The cameraa does noot  
function as expected.  
Remove and reinsert the battery (P99) or discconnect annd reconnnect the AACC ppoowweerr addapter/DC  
coupler. If the problem persists, contact your FUJIFILM dealer.  
I wantt to usee aann AACC ppoowweerr  
adapter and DC coupler  
overseas.  
Check the llaabbeell on the AC power adapter. The AC power addapter caann bbee uusseedd wwiitthh vvoollttaaggeess ooff  
100 – 2400V. Conssult youur travveel agentt for infformation on plug adapters.  
Noo sound.  
Turn silent mode off (P111).  
Troubleshooting  
129  
Problems and Solutions  
Problem  
Solution  
Hue or content of display  
changes unexpectedly.  
Choose OFF for TMONITOR SUNLIGHT MODE (P6).  
Tiimmee aanndd ddaattee ssttaammppss aarre nott correct: Set the cammera cloock (P16).  
Tiimmee and ddaate ssttaammps appeaar on photoographs:Time and date stamps can not bbe deleted. To  
prevent stamps appearring on new photographhs, seleect OFFfor UDATE STTAMP(P119).  
Time and date stamps  
FinePixViewer can not  
be installed or does not  
start.  
FinePixViewer does not support Mac OS X version 10.7 or later. Use one of the applicattions suupplied  
with Mac OS X or purchase other softtware.  
130  
Troubleshooting  
Warning Messages and DDissplays  
The following warnings are displayed in the LCD monitor:  
Warning  
B(red)  
A(blinks red)  
k
Description  
Low batttery. Charge the battery (P7) or iinsert aa fullyy-charged spare battery (P9).  
Battery eexhausteed. Charge the battery (P7) or inseert a fullly-charged spare battery (P9).  
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.  
The camerra caann nnoott ffocuuss.. TTrryy oonnee ooff tthhee ffolllowinng solutions:  
Use fooccuss lock to focuus on another subject at the same distance, then recompose the ppiiccttuurree  
(P37).  
s
(displayed in red with red  
focus frame)  
Use macro mmode ttoo focus wwhenn ttaakking cloose-upps (P40).  
Aperture or shutter speed The subject is too bright or too dark and the picture will be over- or under-exposed. IIff tthhee ssuubbjjeecctt  
displayed in red  
is dark, use the flash (P41).  
FOCUS ERROR  
TURN OFF THE CAMERA Camera malfunction or moving parts of lens obstructed. Turn the camera off and then on again,  
AND TURN ON AGAIN takiinngg ccare not to touch the lens. If the message persists, contact a FUJIFILM dealer.  
LENS CONTROL ERROR  
Thhee mmemory cardd oorr iinntteerrnnal memory is not formmatted orr thhee mmeemmoorryy ccaarrdd was foorr--  
matted in a computer or other device: Format the memory card or iinternnaal memorry using  
the KFORMAT option in the camerra setup mmenu (P112).  
Thhee memory cardd contacts reeqquiree cclleeaanniing: Clean the contacts with a softt,, ddrryy ccllootthh.. IIff  
CARD NOT INITIALIZED  
the message is repeated, format the card (P112). If the message persists, replacee tthhee ccard.  
Caammeerra maalfunctiion: Contact a FUJIFILM dealer.  
PROTECTED CARD  
BUSY  
The memory caard is locked. Unlock the ccard (P10).  
The memory carrd is inccoorrectlyy formatted. Use the camerra to forrmmat the caard (P112).  
Turn the caammeerraa ooand wwait for it to cool. If no actiion is takeen, thhe caammeerraa wwiillll ttuurrnn ooaauuttoo--  
matically.  
p
Troubleshooting  
131  
Warning Messages and Displays  
Warning  
Description  
The memory card iss not formatted for use in the camera. Format the cardd (P112).  
The memory carrd contaaccts require cleaning or the memoryy ccard is damaged. Clleeaann tthhee ccoonnttaaccttss  
withasoftt,,ddrryyccllootthh.. IIfftthheemmeessssaaggeeiissrreeppeatedd,formatthecardd(P1122). Iftthemesssageepersists,  
replace the card.  
CARD ERROR  
Incompatible memory card. Usse a compatible card (P12).  
Camera malfunction. Contact a FUJIFILM dealer.  
aMEMORY FULL  
bMEMORY FULL  
INTERNAL MMEMORY IS  
FULL  
The memory carrd or inteernal meemmory is full and pictures caan not be rrecorded or copied. Delete  
pictures or insert a memory caard with more free space.  
INSERT A NNEW CARD  
Memory caard erroorr oorr ccoonnnneeccttiioonn eerrrroorr: Reinsert tthhee ccard oorr ttuurrnn tthhee ccaammeerraa ooaanndd tthheenn  
on again. If the message persists, contact a FUJIFILM dealer.  
Noott eennoough memory reemmaaining to reeccoorrdd aaddddiittiioonnaall ppiictureess: Delete pictures or insert  
a memory cardd with moore freee space.  
Thhee memory cardd oorr iinntteernal memory is not fformattted: Forrmat the memory card or  
internal memory (P112).  
Thhee llee iiss ccoorrupt or was not creeaatteedd with the camera: The file can nnot be viiewed.  
Thhee memory cardd contacts reeqquiree cclleeaanniing: Clean the contacts with a softt,, ddrryy ccllootthh.. IIff  
the message is repeated, format the card (P112). If the message persists, replacee tthhee ccard.  
Caammeerra maalfunctiion: Contact a FUJIFILM dealer.  
WRITE ERROR  
READ ERROR  
132  
Troubleshooting  
Warning Messages and Displays  
Description  
Warning  
The camerra has run out of frame numbers (current frame number iiss 999999--99999999)).. FFoorrmmaatt tthhee  
memory caard and select RENEW for BFRAME NO. Takke a picture to reset frame num-  
bering to 100-0001, then select CONTINUOUS for BFRRAME NO. (P113).  
FRAME NO. FULL  
PRESS AND HOLD  
THE DISP BUUTTON TO  
DEACTIVATE SILENT MODE  
An attempt was made to choose a flash mode or adjust the volume withh the caammeerraa iinn ssiilleenntt  
mode. Exit silent mode before choosing a flash mode or adjusting the volume (P111).  
A search has reettuurrnneedd mmoorree tthhaann 3300,,000000 rreessuullttss: Choose a search that retuurns fewer  
results.  
TOO MANY FRAMES  
Moree tthan 999 images aree sseelleeccted for deletion: Choose feewwer images.  
An aatttteemmpptt wwaass mmaaddee ttoo ddeelleettee,, rroottaattee,, oorr aadddd aa vvooiiccee mmeemmoo ttoo aa pprrootteecctteedd ppiiccttuurree.. RReemmoovvee  
protection and try again (P105).  
PROTECTED FRAME  
aCAN NOT CROP  
CAN NOT CROP  
apictures can nott be croopped.  
The picture is damaged or was not createedd wwiitthh tthhee ccamera.  
PCANNOT EXECUTE  
QCANNOT EXECUTE  
aCANNOT EXECUTE  
CAN NOT ROTATE  
An attempt was made to create a resized copy at a size equal to or larger than the original.  
Choose a smaller size.  
An attempt was made to rotate a picture that can not be rotated.  
FCAN NOT ROTATE Movies can not be rotated.  
mCANNOT EXECUTE Red-eye removal can not be applied to the selected picture.  
FCANNOT EXECUTE Red-eye removal can not be applied to movies.  
NO CARD  
Noo mmeemmoorryy ccard inserted when ECOPY is selected. Insert a memory card.  
Troubleshooting  
133  
Warning Messages and Displays  
Warning  
Description  
bNO IMAGE  
aNO IMAGE  
The souurce seelecteedd ffor ECOPY contains no images. Select a different source.  
Thhee vvooiiccee mmemo file is corrupt: The voice memo cann not bee playeed back.  
Caammeerra maalfunctiion: Contact a FUJIFILM dealer.  
uERROR  
The DPOF print order on the curreent memoryy caarrdd ccoonnttaaiinnss mmoore than 9999 imagess.. Copy the  
pictures to internal memory and create a new print order.  
The picture caan not be pprintedd uusing DPOF.  
DPOF FILE ERROR  
CAN NOT SET DPOF  
FCAN NOT SET DPOF Movies can not be printed using DPOF.  
A connection error occuurrrreedd wwhhiillee picturees werre beiinng printedd or coopied tto a coomputeer or other  
device. Confirm that the device is turned on and that the USB caable iss conneected.  
Printeer out oof papeer or innkk,, oorr ootthheerr pprriinntteerr eerrrroorr.. CChheecckk pprriinntteerr ((sseeee pprriinntteerr mmaannuuaall ffoorr ddeettaaiillss))..  
To resume printing, turn the printer off and then turn it back on.  
COMMUNICATTION ERROR  
PRINTER ERROR  
PRINTER ERROR  
RESUME?  
Printer out of paper or ink, or ootthheerr pprriinntteerr eerrrroorr.. Check printer (see printer manual for ddetails). If  
printing does not resume automatically, press MENU/OK to resume.  
An aatttteemmpptt wwaass mmaaddee ttoo pprriinntt aa mmoovviiee,, aa ppiiccttuurree nnoott ccrreeaatteedd wwiitthh tthhee ccaammeerraa,, oorr aa ppiiccttuurree iinn aa  
format not ssuuppppoorrtteedd bbyy tthhee pprriinntteerr.. MMoovviieess aanndd ssoommee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess ccan  
CANNOT BE PRINTED not be printed; if the picture is a ssttiillll ppiiccttuurree ccrreeaatteedd wwiitthh tthhee ccamera, check the pprriinntteerr mmaannuuaall  
to conrm thaat the ppriinntteerr ssuuppppoorrttss tthhee JJFFIIFF--JJPPEEGG oorr EExxiiff--JJPPEEGG fformaat. If iitt ddooeess nnoott,, tthhee ppiiccttuurreess  
can not be pprinted.  
134  
Troubleshooting  
Appendix  
Innteerrnnaall MMeemmoorryy//MMeemmoorryy CCaarrdd CCaappaacciittyy  
The following table shows the recording time or number of pictures available  
at different image sizes. All figures are approximate; file size varies with the  
scene recorded, producing wide variations in the number of files that can be  
stored, and the number of exposures or length remaining may not dimin-  
ish at an even rate. A limited number of test pictures can be taken when no  
memory card is inserted.  
FinePix F770EXR  
Medium  
Internal memory  
(apprrox. 30 MB)  
O
4 GB  
8 GB  
T
FINE  
4
NORMAL  
FINE  
610  
810  
NORMAL  
970  
FINE  
1240  
1650  
1970  
2590  
3850  
7040  
NORMAL  
1970  
2620  
3850  
5030  
O
4 : 3  
O16 : 9  
4 : 3  
P16 : 9  
4 : 3  
7
6
7
10  
15  
27  
10  
14  
19  
28  
41  
1290  
1900  
2480  
3570  
5060  
P
970  
1280  
1900  
3470  
Q
7250  
10270  
76min.  
98min.  
Q16 : 9  
i19201  
15sec.  
20sec.  
51sec.  
38sec.  
77sec.  
38sec.  
37min.  
48min.  
113min.  
84min.  
168min.  
84min.  
h12801  
f2  
229min.  
171min.  
342min.  
171min.  
k640 × 4803  
k320 × 2403  
k320 × 1123  
1 Use a G card or better. Individual movies can not exceed 29 minutes in length.  
2 Individual movies can not exceed 120 minutes in length.  
3 Use a G card or better. Individual movies can not exceed 30 seconds in length.  
135  
Internal Memory/Memory Card Capacity  
FinePix F750EXR  
Medium  
Internal memory  
(apprrox. 25 MB)  
O
4 GB  
8 GB  
T
FINE  
3
5
6
8
NORMAL  
FINE  
620  
830  
NORMAL  
990  
FINE  
1250  
1670  
1990  
2620  
3880  
7110  
NORMAL  
1990  
2640  
3880  
5080  
O
4 : 3  
O16 : 9  
4 : 3  
P16 : 9  
4 : 3  
6
8
12  
15  
23  
33  
1310  
1930  
2530  
3640  
5160  
P
990  
1300  
1930  
3540  
Q
12  
22  
7320  
10370  
76min.  
98min.  
Q16 : 9  
i19201  
12sec.  
16sec.  
40sec.  
30sec.  
62sec.  
31sec.  
38min.  
49min.  
115min.  
85min.  
172min.  
86min.  
h12801  
f2  
232min.  
172min.  
345min.  
172min.  
k640 × 4803  
k320 × 2403  
k320 × 1123  
1 Use a G card or better. Individual movies can not exceed 29 minutes in length.  
2 Individual movies can not exceed 120 minutes in length.  
3 Use a G card or better. Individual movies can not exceed 30 seconds in length.  
136  
Appendix  
Specificaattions  
System  
Model  
Digital Camera FinePix F770EXR/F750EXR  
16 million  
Effective pixels  
Image sensor  
Storage media  
/
12-in., EXR CMOS with primary color filter  
Internaal memory  
• SD/SDHC/SDXC memory cards  
F770EXR: approx. 30 MB  
F750EXR: approx. 25 MB  
File system  
File format  
Compliant with Desiggn Rulee for Camera File System (DCF), Exif 2.3, and Digital Print Order  
Format (DPOF)  
Still picctures: Exif 2.3 JPEG (compressed); RAW (origiinnaall RRAAFF ffoorrmmaatt,, ssppeecciiaall--ppuurrppoossee ssoofftware  
required); RAW+JPG available  
Still picctures (3D): MPO  
Movies: MOV (H.264)  
O4 : 3: 4,608 × 3,456  
P4 : 3: 3,264 × 2,448  
Q4 : 3: 2,304 × 1,728  
Audio: WAV  
O3 : 2: 4,6088 × 3,0772  
P3 : 2: 3,2644 × 2,1776  
Image size (pixels)  
O16 : 9: 4,608 × 2,592  
P16 : 9: 3,264 × 1,840  
Q16 : 9: 1,920 × 1,080  
Q3 : 2: 2,3044 × 1,5336  
r MOTION PANORAMA v: 1,624 × 11,520 (tall)/11,520 × 1,080 (wide)  
r MOTION PANORAMA w: 1,624 × 5,760 (tall)/5,760 × 1,080 (wide)  
r MOTION PANORAMA x: 1,624 × 3,840 (tall)/3,840 × 1,080 (wide)  
r MOTION PANORAMA z: 1,624 × 11,520 (tall)/11,520 × 1,080 (wide)  
r MOTION PANORAMA v: 1,080 × 7,680 (tall)/7,680 × 720 (wide)  
r MOTION PANORAMA w: 1,080 × 3,840 (tall)/3,840 × 720 (wide)  
r MOTION PANORAMA x: 1,080 × 2,560 (tall)/2,560 × 720 (wide)  
r MOTION PANORAMA z: 1,080 × 7,680 (tall)/7,680 × 720 (wide)  
F770EXR  
F750EXR  
Leens  
Fujinon 20 × opticall zoom llens,, F3.5 (wide angle) – F5.3 (telephoto)  
Focal length  
Digital zoom  
Aperture  
f=4.6 mm–92.0 mmm (35-mm foormat equivalent: 25 mm–500 mm)  
Up to about 3.4 × with intelligent digital zoom (up to 68 × when combined with optical zoom)  
F3.5/F7.1/F10.0 (wide angle), F5.3/F11.0/F16.0 (telephoto); uses Neutral Density (ND) filter  
Appendix  
137  
Specifications  
System  
Focus range  
(distance from front of lens)  
Apppprrooxx.. 4455 ccmm ((11..44 fft.)–infinityy (wide angle); 2.5 m (8.22 fft..)–infinity (telephoto)  
Maaccrro: approx. 5 cm33..00 mm//11..99 iinn..99..88 fftt.. (wide angle); 1.3 m33..00 mm//44..22 fftt..99..88 fftt.. (telephoto)  
Sensitivity  
Sttaannddaarrdd oouuttppuutt sseennssiitivity equivalent to ISO 100, 200, 4400, 88000, 1166000, 3322000, 6644000 (image size  
Por Q), 12800 (image size Q); AUTO, AUTO (400), AUTO (800), AUTO (1600), AUTO (3200)  
Metering  
256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE  
Exposurre control  
Programmed AE; aperture-priority AE; shutter-priority AE; manual exposure  
/
Exposure compensation –2 EV – +2 EV in increments of 13EV  
Picture stabilization Optical stabilization (image-sensoorr sshhiifft)  
Shutter speed (combined 8 s–12,000 s  
/
mechanicaall and electronic  
/
/
O: ¼ s–11,000 s  
H: 3 s–11,000 s  
Other modes: ¼ s–12,000 s  
p: 4 s–½ s  
shutter)  
/
/
S: 2 s–12,000 s  
Coonnttinuous  
F770EXR  
I: Max. 200 frames; frame rate caan be seleccted fromm 111, 8, 5, annd 3 fps (Thhe frame raate varies  
depending on the shooting conditions or numbers of frames in continuous shooting.)  
P: Max. 16 frames; frame rate can bee seleccted froom 11, 88, 5, annd 3 fps  
F750EXR  
Focus  
I/L: Max. 12 frames; frame rate caan be sellectedd from 122, 6, annd 3 fps  
Mode: Cennter AFF, multti AF,, ccontinnuous AAF, trraacckking AF  
Autofoocus syystem: Contrast-detect TTL AF  
White balance  
Self-timer  
Custom, auto, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white  
fluorescent, incandesccent, unnderwater  
Off, 2 sec., 10 sec.; auto shutter release (nand o)  
138  
Appendix  
Specifications  
System  
Flash  
Auto flash; effecttive raange wwhen seensittivity is seet to AUTOO is apppprrooxx.. 1155 ccmm33..77 mm//00..44 fftt..1122..11 fftt..  
(wide angle; note that lens may block flash at short ranges), 90 cm22..44 mm//22..99 fftt..77..88 fftt.. (telephoto)  
Flash mode  
Auto, lll flashh, off,, sslow ssyync (reed-eyee remmooval off); aauto with reed-eyyee removvaall,, llll aasshh wwiitthh rreedd--  
eye removal, off, slow sync with red-eye removal (red-eyye remmooval on)  
LCD monitor  
Movies  
3.0-in., 460k-dot color LCD monitor; frame coverage approx. 100%  
i1920: 1,920 × 1,080 (1080p), 30 fps  
f: 640 × 480 (VGA), 30 fps  
k320×240: 160 fps  
h1280: 1,280 × 720 (720p), 30 fps  
k640×480: 80 fps  
k320×112: 320 fps  
Notte: i, h, and fmovies are recorded with stereo sound.  
Date map database was October 2010  
created  
Input/output terminals  
A/V OUT (aaudio//videeoo oouuttppuutt)) NTSC or PAL output with monaural sound  
Digital input/output  
HDMI output  
USB 2.0 High-Speeed; sharees A/V OUT cconnector; MTP/PTP  
HDMI mini connector  
Appendix  
139  
Specifications  
Power supply/other  
Power suppplly  
F770EXR: NP-50A rechargeable battery  
F750EXR: NP-50 rechargeable battery  
• AC-5VX AC power adapter and CP-50 DC coupler (sold seeparaatteelly)  
Battery life (approximate  
numberr of fraames thhaatt ccan  
be takeen withh a fullly-charged  
battery)  
Battery type  
NP-50A/NP-50 (type supplied with camera)  
Approoximate number of frames  
300  
CIPA staandard, mmeassuurreeddiinnB(auto)modeusingbatterysuppliedwithh ccameraandSDmemorycard.  
Notte: NNumberr of shhoots thhaat caann bbee ttaakkeenn wwiitthh bbaatttteerryy vvaarriieess wwiitthh bbaatttteerryy cchhaarrggee lleevveell aanndd wwiillll  
decline at low temperatures.  
Dimensions (W × H × D) 105.1 mm × 63.3 mm × 36.0 mm/4.1 in. × 2.4 in. × 1.4 in., excluding projections  
(minimum depth 24.9 mm/0.9 in.)  
Shooting weight  
Caammera wweight  
F770EXR: Approx. 234 g/8.2 oz., including battery and memory card  
F750EXR: Approx. 228 g/8.0 oz., including battery and memory card  
F770EXR: Approx. 213 g/7.5 oz., excluding battery, accessories, and memory card  
F750EXR: Approx. 209 g/7.3 oz., excluding battery, accessories, and memory card  
Operating conditions  
Temperratuurre: 0 °C – +40 °C/+32 °F – +104 °F  
Humidity: 10–80% (no condensation)  
140  
Appendix  
Specifications  
NP-50A rechargeable battery (F770EXR)  
Noommiinnal voltage  
Noommiinnaall ccaappaacciitty  
DC 3.7V  
1000 mAh  
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F  
Dimensions (W × H × D) 35.4 mm × 40.0 mm × 6.6 mm/1.3 in. × 1.5 in. × 0.2 in.  
Weight  
Approx. 20 g/0.7 oz.  
NP-50 rechargeable battery (F750EXR)  
Noommiinnal voltage  
Noommiinnaall ccaappaacciitty  
DC 3.6V  
1000 mAh  
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F  
Dimensions (W × H × D) 35.4 mm × 40.0 mm × 6.6 mm/1.3 in. × 1.5 in. × 0.2 in.  
Weight  
Approx. 18 g/0.6 oz.  
BC-45W battery charger  
Rated input  
Input capacitty  
100V–240V AC,, 5500//6600 HHz  
100 V: 8.0VA  
240 V: 12VA  
Rated output  
4.2V DC, 550 mA  
Supported batteries  
Charging time  
NP-50A/NP-50 rechargeable batteries  
Approx. 150 minutes (+20 °C/+68 °F)  
Dimensions (W × H × D) 91 mm × 62 mm × 23 mm/3.5 in. × 2.4 in. × 0.9 in., excluding projections  
Weight Approx. 67 g/2.3 oz., excluding battery  
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F  
Weight and dimensions vary with the country or region of sale.  
Appendix  
141  
Specifications  
Noottiices  
• Specifications subject to change without notice; for the latest information, visit http://  
www.fujifilm.com/products/digital_cameras/index.html. FUJIFILM shall not be held li-  
able for damages resulting from errors in this manual.  
• Although the LCD monitor is manufactured using advanced high-precision technol-  
ogy, small bright points and anomalous colors may appear, particularly in the vicinity  
of text. This is normal for this type of LCD monitor and does not indicate a malfunc-  
tion; images recorded with the camera are unaffected.  
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,  
electric fields, static electricity, or line noise).  
• Due to the type of lens used, some distortion may occur at the periphery of images.  
This is normal.  
142  
Appendix  
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN  
http://www.fujifilm.com/products/digital_cameras/index.html  
Restrictions on Camera Settings  
The options available in each shooting mode are listed below.  
Shooting Mode  
E
Adv.  
ijni  
SP  
mMN OHp QRsf U VWF  
Option  
R
S T U B  
r
M
A
S
P
✔ ✔1  
C
D h Z  
l
Q
N
✔ ✔1  
BOFF  
O
K
L
M
1
N
✔ ✔1  
BON  
✔ ✔1  
1
1
1
1
P
✔ ✔1 ✔ ✔1  
✔ ✔1  
✔ ✔1  
S/R  
o
n
h
1
1
F
F
OFF  
d
✔ ✔5  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AUTO  
AUTO (3200)  
AUTO (1600)  
AUTO (800)  
AUTO (400)  
128002  
64003  
3200  
1600  
800  
400  
200  
N
100  
S
O
✔ ✔4  
O
P
Q
T
Restrictions on Camera Settings  
Shooting Mode  
D h Z  
E
Adv.  
ijni  
SP  
mMN OHp QRsf U VWF  
Option  
AUTO  
R
S T U B  
✔ ✔1  
r
1
M
A
✔ ✔1  
S
P
C
l
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
✔ ✔1  
1
1
1
V
W
X
Y
Z
c
U
✔ ✔5  
d
P
e
b
✔ ✔5  
✔ ✔5  
f
5
D
y
O
X
Y
P
I
OFF  
R
1
1
1
1
✔ ✔1  
Z
1
1
1
1
5
5
1
OFF  
ON  
✔ ✔1  
✔ ✔1  
✔ ✔1  
✔ ✔1  
✔ ✔1  
✔ ✔1  
✔ ✔1  
✔ ✔1 ✔ ✔1  
b
C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
o
p
q
r
s
u
x
✔ ✔1  
✔ ✔1  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
✔ ✔1  
F
F
1
n
r
u
Restrictions on Camera Settings  
Shooting Mode  
D h Z  
E
Adv.  
ijni  
SP  
mMN OHp QRsf U VWF  
Option  
i1920  
h1280  
f
R
S T U B  
r
M
A
S
P
C
l
W
k
640×480  
320×240  
320×112  
k
k
J
N
1
L
l
M
m
OFF  
ON  
OFF  
ON  
OFF  
ON  
L
✔ ✔1  
1
✔ ✔1  
R
B
C
j
x
1
1
1
1
✔ ✔1  
✔ ✔1  
✔ ✔1  
1
✔ ✔5  
✔ ✔5  
1
1
1
OFF  
ON  
OFF  
n
✔ ✔1  
✔ ✔1  
✔ ✔1  
✔ ✔1  
✔ ✔1  
1
1
1
1
✔ ✔1  
o
1
2
3
4
5
Automatically optimized for selected shooting mode.  
Image sizes over Qare set to Q.  
Image sizes over Pare set to P.  
Aspect ratio fixed at 4 : 3.  
Fixed at settings before recording a movie.  

Attwood 69212T User Manual
Black Decker BL10451P ARCL User Manual
Canon VM E708 User Manual
Crown Boiler BSI069 User Manual
Focal Access 1 165 A3 User Manual
GoPro CHDHA301 User Manual
Hifionics GLX60 4 User Manual
Jensen CD3610 User Manual
JVC GR D875U User Manual
JVC GR DVL150 User Manual